#

# This file is provided under a CDDLv1 license. When using or

# redistributing this file, you may do so under this license.

# In redistributing this file this license must be included

# and no other modification of this header file is permitted.

#

# CDDL LICENSE SUMMARY

#

# Copyright(c) 1999 - 2009 Intel Corporation. All rights reserved.

#

# The contents of this file are subject to the terms of Version

# 1.0 of the Common Development and Distribution License (the "License").

#

# You should have received a copy of the License with this software.

# You can obtain a copy of the License at

# http://www.opensolaris.org/os/licensing.

# See the License for the specific language governing permissions

# and limitations under the License.

#

# Copyright (c) 2010, Oracle and/or its affiliates. All rights reserved.

#

#

4.0.4 code drop from Intel on 1/30/2003

=======================================

This version is used as the base for putback into both s10 and

s9u4.

Following changes were done to this code base before putting

back into solaris trees (S10 & S9U4):

1) Changes to e1000_hw.c to remove build warnings

+ diff /home/naroori/grizzly/sources/e1000g/1_4.0.4/e1000_hw.c .

2616c2616

< phy_info->downshift = hw->speed_downgraded;

---

> phy_info->downshift = (int)hw->speed_downgraded;

2684c2684

< phy_info->downshift = hw->speed_downgraded;

---

> phy_info->downshift = (int)hw->speed_downgraded;

2) Changes to e1000g_dlpi.c for ipv6 plumbing problem and

problem with default MTU size of 2024.

+ diff /home/naroori/grizzly/sources/e1000g/1_4.0.4/e1000g_dlpi.c .

313a314

> /* the following causes problem with ipv6 plumbing...

314a316

> */

628c630,632

< if (Adapter->Shared.max_frame_size == FRAME_SIZE_UPTO_16K)

---

> if (Adapter->Shared.max_frame_size == ETHERMTU) {

> }

> else if (Adapter->Shared.max_frame_size == FRAME_SIZE_UPTO_16K) {

630c634,635

< else

---

> }

> else {

631a637

> }

3) Changes to e1000g_main.c for version string modification,

removing console messages on bootup and problems with default

MTU size of 2024.

+ diff /home/naroori/grizzly/sources/e1000g/1_4.0.4/e1000g_main.c .

59c59

< static char e1000g_version[]="Driver Ver. 4.0.4-beta";

---

> static char e1000g_version[]="Driver Ver. 4.0.4";

937c937

< e1000g_log(Adapter,CE_CONT,"\n%s, %s\n",AdapterName,e1000g_version);

---

> cmn_err(CE_CONT,"!%s, %s\n",AdapterName,e1000g_version);

3000c3000

< Adapter->Shared.max_frame_size = FRAME_SIZE_UPTO_2K;

---

> Adapter->Shared.max_frame_size = ETHERMTU;

3013c3013

< Adapter->Shared.max_frame_size = FRAME_SIZE_UPTO_2K;

---

> Adapter->Shared.max_frame_size = ETHERMTU;

Bug fixes to 4.0.4:

===================

1) bug#4829398 code cleanup for ethernet bootup messages

4.0.12 code drop from Intel on 3/18/2003

========================================

This drop had extensive changes from 4.0.4. Many changes after

4.0.4 were realted to new hardware (a.k.a. BayCity chipset),

not relevant to Grizzly.After looking at the changelog from Intel,

we decided not to do a putback but rather take only high priority

fixes from this drop and generate a new version 4.0.4.1.

Here is the changelog supplied by Intel for this drop:

________________________________________________________________________

Component Name: Unix-Solaris_8254x_BayCity_Intel

Description: Bay City software component for gigabit products

________________________________________________________________________

---Version: 4.0.13 Date: 3/14/2003 5:00:00 PM---

Added transmit mutex locking to the 82547 workaround code.

---Version: 4.0.12 Date: 3/10/2003 8:01:00 PM---

Added new shared code with LED link speed fix

---Version: 4.0.11 Date: 3/7/2003 5:57:00 PM---

Updated the Tanacross FIFO hang workaround to reset FIFO pointers instead of sending autonomous packets.

---Version: 4.0.10 Date: 3/4/2003 2:39:00 PM---

Removed an extra sdu adjustment that was left in by accident

---Version: 4.0.9 Date: 3/4/2003 11:13:00 AM---

Removed the first call to adapter_stop. This was called before the HW struct was properly initialized, and could cause hangs.

Changed reported ethernet sdu from 2024 to 1500, as driver could be configured for invalid frame MTU sizes in Solaris 9.

Added Tanacross workaround for FIFO hang.

---Version: 4.0.8 Date: 2/25/2003 2:27:00 PM---

Shared code update including Phy init script.

Smartspeed workaround added. e1000g_smartspeed called from LocalTimer function every two seconds when link is down.

---Version: 4.0.7 Date: 2/18/2003 11:41:00 AM---

Updated to include bug fixes from the shared code.

---Version: 4.0.5 Date: 1/31/2003 10:13:00 AM---

Support for new hardware changes

Removed the extra ack sent at the end of the attach_req routine. This extra ack previously made IPv6 plumbing on Solaris 9 fail.

4.0.4.1

=======

This version is not an Intel drop but 4.0.4 merged with two

high priority fixes from 4.0.12. We will give back the 4.0.4.1

driver back to Intel, per their request, so they have the exact

code that we are releasing through Solaris.

The following are the two fixes selected for inclusion from

4.0.12 codebase:

1) Removing the first call to adapter_stop as discussed in

4.0.12 changelog.

2) Corrections to MTU size calculations first introduced

in our 4.0.4 putback to bring them into sync with 4.0.12

MTU size calculations.

We also added README file (current file you are reading) during

this putback.

4.0.4.2

=======

This version has the following fixes:

1) bug#4857098: e1000g driver assumes another intel card as its own.

The fix involved eliminating 1009, 1012, 1015, 1016, 1017

device-ids from e1000g nodelist so that they do not conflict

with iprb's subsystem-ids.

This fix has to be reverted later once we have a proper fix for

bug#4859426.

2) bug#4853683: e1000g lacks a large number of expected kstats

The fix involved three steps: a) Renaming some of the existing

kstats to comply with WDD documentation b) Computing some of

those which are not being tracked c) Supplying zero for the rest

the error stats which are not being tracked.

This fix has to be revisited to improvise the statistics in

future.

3) bug#4862529: System panics during configuring devices on a Dell 4-way

servers. The fix involved removing all the devic-ids from nodelist

except for 1010. This means that we support now only the grizzly

on-board gigabit chipset and "Intel Pro/1000 MT Dual Server Adapter".

This fix has to be reverted later once we have a proper fix for

bug#4859426.

4.0.4.3

=======

This version has the following fixes:

1) bug#4874857: ipv6 ping fails on bootup for e1000g.

The fix involved implementing multicast tables both at per stream

level and per device level.

2) bug#4875743: null pointer dereference in ddi_dma_addr_bind_handle.

The fix involved adding LastTxDescriptorBuf to struct e1000g and

handling consequent proper calculations for LastTxDescriptor.

3) bug#4882541: setting up ethernet address causes machine to panic.

The fix involved removing a spurious log message which was causing

the panic.

4) bug#4883302: Reinstate the removed device-ids - phase 2.

The fix involved some chip initializations to handle 1000 id.

5) bug#4919285: device id 8086,100e needs to be added

The fix needed for the Intel Precision 350 workstation

4.2.11

======

We need to sync up with the latest Intel code base for e1000g driver.

Intel is currently at version 4.2.11 while we are on 4.0.4 branch.

The exact version under 4.0.4 branch is 4.0.4.3. Since we are on

the branch while Intel is working on the main trunk, we have had

lot of friction in getting timely fixes from Intel. The current

syncing up with their main trunk lets us a smooth migration path.

The new code base also would provide us with support for additional

cards including Quad port cards (See bugs: 4921433, 4914460).

In our old 4.0.4 branch, we had to drop support for a lot of cards

for various problems; with the current syncing up, we would be able

to support so many various cards except for the cards clashing with

iprb driver.

The new code base also has support for additional new chipsets. The code

base also benefits from any fixes to the shared code base with other

operating system drivers.

The new codebase also has lot of cleanups in terms of various #ifdefs

and should be much simpler to maintain.

So the list of actual ids take out are:

1009

1012

1013

1015

1016

1017

4.2.15

======

This intel code drop addresses the following bug:

4909863: Bad trap panic in e1000g_rtn_buf

4.2.16

======

This version has the following fix:

4932422 interconnect remains faulted after adapter disconnected and then reconnected

Notes on packaging:

===================

Intel names the package as INTCGigaE while we chose to rename

it as SUNWintgige as per Sun packaging conventions.

4.2.17

======

This version has the following fixes:

4971416 e1000g seems to hang system when no network connected

4997067 e1000gattach panicks when the going gets tough

4990064 e1000g leaks memory when it runs out of transmit descriptors

4.2.17.1

======

This version has the following fix:

5014625 e1000g driver panicked when snoop(1M) exited

4.2.17.2

======

This version has the following fix:

4940870 e1000g: Dependence on instance initialization order disables .conf properties

5033616 e1000g panicked after rem_drv while some service still binds to the driver

5037062 strings have crept back in e1000g/adpu320 related mutex_init()s

5050268 Some e1000g flag operations are not correct.

4.2.17.3

======

This version has the following fix:

5067162 e1000g cannot transmit heavy UDP

4.2.17.4

======

This version has the following fix:

5010052 The stress load/unload test of Intel PWLA8494MT Quad Port NIC causes system hung

5050265 E1000g does not support IPV6 fast path. This will impact IPV6 performance.

5050369 E1000g locks the system if plumb/unplumb under heavy workload and snoop.

5050415 E1000g will accepts ethernet packets which are not addressed to it.

5055132 E1000g crashes when injected with Jumbo Frame packets.

4.2.17.5

======

This version has the following fix:

6175307 system crash with memory size of 11GB

6176031 the sequence of releasing resource error in e1000gattach

6180180 PktAlloc - Could not bind rbuf packet as single frag. Count - 2

6185022 Port hang when unplumb interface under heavy traffic

4.2.17.6

======

This version has the following fix:

6196426 e1000g should support NICs that use the internal serdes for external connectivity

4.2.17.7

======

This version has the following fix:

4921433 e1000g: Should not probe by using VID/DID table to identify adapters

4.2.17.8

======

This version has the following fix:

6213101 64bit DMA max address space should be supported by e1000g driver

6215261 e1000g driver 211% slower in AMD64 than 32 bit e1000g driver (S10_73, Single CPU V20z)

4.2.17.9

======

This version has the following fix:

6256212 fix for 6213101 breaks e1000g for 32-bit kernels on machines with >4GB of physical memory

4.2.17.10

======

This version has the following fix:

6203602 e1000g needs to support the Intel PCI-E card

6217046 we need to merge the Intel code (version 4.2.28) into e1000g

5.0.0

======

This version has the following fix:

PSARC/2005/470 E1000g Nemo Migration

6221079 e1000g driver interface conversion from DLPI to GLD3.0(nemo)

6224901 e1000g fails to configure VLANs on a Sun v65x

6286414 snmp: ifOperStatus for e1000g driver doesn't change when cable is unplugged.

6238486 e1000g: poor performance in web server benchmark, high CPU utilization noted

6293265 e1000g_intr doesn't use mutex at all

6304657 e1000g_PktAlloc_buffers() causes a panic when ddi_dma_addr_bind_handle() fails.

4913292 e1000g: does not support PSARC 2003/264 Extended IP cksum_offload

5071610 e1000g can't send any packets after a jumbo-packet forwarding test.

5082975 in Jumbo enable mode, netperf indicates a lower throughput, compared to Jumbo of

5085394 e1000g driver hangs system during 64byte stress testing

6174349 netlb support needed for Solaris e1000g driver

6207682 e1000g needs link up/down support

6211068 e1000g has some input error packets during stress test

6212810 e1000g caught sending unsolicited M_PROTO/M_PCPROTO messages

6219298 warnings about "inconsistent getinfo(9E) implementation"

6226217 e1000g should support trunking

6239279 Network stess test fail on 82545GM chip on IBM Blade HS40

6242612 e1000g needs to support SPARC

6247936 In e1000g transmission, ddi_dma_addr_bind_handle() returns more cookies than speficied

6273730 e1000g causes memory leaks within Freelist_alloc and PktAlloc_buffers

5073739 find some memory leaks after load_unload test

6287250 e1000g may need to use new Intel-recommended semaphore mechanism

5.0.1

======

This version has the following fix:

6313609 2-port Intel NIC (part# 370-6687) performs poorly compared to 1-port Intel NIC (part# 370-6685)

6315002 gcc and e1000g don't get along

5.0.2

======

This version has the following fix:

6319100 Tier0 Ontario machine does not boot net with sparc e1000g driver substitution for sparc ipge driver

5.0.3

======

This version has the following fix:

6327693 e1000g should use MSIs when possible

6333461 panic[cpu0]/thread=d63f4de0: assertion failed: !dma->dp_inuse, file: ../../i86pc/io/rootnex.c

5.0.4

======

This version has the following fix:

6351378 e1000g panic seen after bfu'ing latest onnv nightly

5.0.5

======

This version has the following fix:

6303973 System hard hangs when sharing interrupts (in PIC) mode

6323732 e1000g reports incorrect packet statistics

6333880 Customer is requesting driver for a newIntel 82573 NIC

6336163 netlb support needed for Solaris (sparc) e1000g driver

6339377 e1000g.conf needs to be simplified

6350407 e1000 card in Gateway E2300 does not actually send packets in S10U1

6364052 e1000g driver should provide interface to ndd utility

6367490 e1000g has problem in deliver UDP fragment with addin card

5.0.6

======

This version has the following fix:

4967732 e1000g: high mutex contention in e1000g_start

6316907 e1000g: bcopy() brings better performance in transmitting and receiving small packet

6371753 aggregation of e1000g NICs fails to provide connectivity unless snoop is running

6397163 Jumbo frame statistics always counts zero with e1000g driver

6401903 Memory leak in e1000g driver

5.0.7

======

This version has the following fix:

6337450 e1000g interfaces take much much longer to plumb than bge interfaces on the V40.

6392401 Intel Ophir (82571) e1000g driver fails to attach on sun4u Boston with snv_33

6401659 vlan header getting corrupted due to memmove in e1000g sendPacket

6407374 e1000g still uses some old ddi interrupt routines that need to be changed

6411339 BAD TRAP: e1000g_fill_tx_ring NULL pointer dereference

5.0.8

======

This version has the following fix:

6399084 ipmp doesn't work with e1000g

6412153 ndd force speed is not consistent with e1000g.conf and e1000g(7D)

6415019 system panic when plumb e1000g interface up on SPARC

6415416 netlbtest does not run on Intel(R) PRO/1000 Network controller

5.0.9

======

This version has the following fix:

6337987 Serial Over Lan issue when e1000g driver is used

5.1.0

======

This version has the following fix:

PSARC/2006/248 Nemo MAC-Type Plugin Architecture

PSARC/2006/249 Nemo Changes for Binary Compatibility

6384371 GLDv3 only supports Ethernet

6242059 nemo drivers must not know the size of the mac_t structure

6226635 MAC stats interface could cause problems with binary compatibility

5.1.1

======

This version has the following fix:

6384266 e1000g driver should provide external loopback support

6428883 NEM e1000g drive netlbtest intermittent failed when running Sunvts FUNC test with cputest,vmemtest..

6430731 e1000g.conf file removed on upgrade

6431317 add support for intel Pro/1000 PT Adapter

6433236 Update the e1000g driver with the latest shared code from Intel

6439589 e1000g: whines about checksum capability, unclear what user should do

6441386 The default value of some e1000g parameters may impact rx performance

6445239 assertion failed: cookie_count == 1, file: ../../common/io/e1000g/e1000g_alloc.c, line: 422

6447914 e1000g should support setting of multiple unicast addresses

6449595 Ophir LAA driver workaround is not working for e1000g Driver

5.1.2

======

This version has the following fix:

6450683 Boston panics with e1000g under stress

6463536 BAD TRAP panic for removing aggregation

6463756 e1000g - link_speed / kstat output

6464426 e1000g driver needs a workaround to solve an ESB2 hardware issue

5.1.3

======

This version has the following fix:

6436387 e1000g panic while using cfgadm to unconfigure the pcie slot

6460403 disconnect of pcieX that has ophir with network if plumbed crashes the system

6466962 S10u2 e1000g 5.0.9 adv_autoneg_cap is not reflected on the kstat -p

6470233 e1000g_fill_tx_ring doesn't always update TDT properly

5.1.4

======

This version has the following fix:

6462893 HCTS network test failed on thumper machine due to e1000g issue

6467860 e1000g configured/used as cluster interconnect goes up and down when connected back to back

5.1.5

======

This version has the following fix:

6479912 Interrupt throttling tunable needed

6492025 northstar MMF e1000g external loopback fail.

5.1.6

======

This version has the following fix:

6482530 Need Ethernet driver for Intel G965 chipset

6491179 link aggregation with e1000g does not work unless snoop is running

6494743 e1000g 5.1.4 driver does not work with s11_52

6502458 e1000g is open source, move the source from usr/closed to use/src

6505360 e1000g Makefile should not include "-N drv/dld" in the LDFLAGS

5.1.7

======

This version has the following fix:

6454375 e1000g link flaps at initialization, triggering failovers

6472255 e1000g can't restore to 1000M with ndd setting

6496763 e1000g should free packets when link is down

6501294 "eeprom checksum failed" with pci8086,108c device

6504688 e1000g.conf settings are inconsistent with ndd output

6505445 e1000g : when all advertised capabilities are set to 0, ndd puts all of them 1

6519690 e1000g should not print the link up/down messages to console

6531474 Fatal PCIe Fabric Error panics on T2000 when using jumbo frames on e1000g interfaces

6535712 e1000g: the processing of the checksum flags should be protected by tx_lock

5.1.8

======

This version has the following fix:

6548711 e1000g: recursive mutex_enter in e1000g_link_check() on ESB2 platforms

6550086 e1000g: detaching driver immediately after attach induces panic

5.1.9

======

This version has the following fix:

6507422 Dynamic Reconfiguration detach fails for e1000g

5.1.10

======

This version has the following fix:

6490623 Some networking problems with Solaris_b44_64 domU(using solaris_b44_64 dom0)

6510396 system panicked in e1000g_82547_timeout

6554976 e1000g driver does not support 10D5 device - Sun Pentwater PEM quad port

5.1.11

======

This version has the following fix:

6552853 system panics in e1000g_alloc_dvma_buffer during hotplug testing

5.2.0

======

This version has the following fix:

6535620 e1000g needs to support ICH9 devices

6572330 e1000g: integrate the latest Intel refactored shared code

6573381 e1000g receiving VLAN tagged frames does not do hardware checksumming

5.2.1

======

This version has the following fix:

6594676 e1000g should free private dips while no rx buffers are held by upper layer

5.2.2

======

This version has the following fix:

6480448 Sunvts netlbtest external loopback failed on 82546 chipset

6521984 Sunvts netlbtest failed on Northstar QGE cards

6531842 e1000g link goes down and up frequently on T2000 systems

6540535 Sunvts netlbtest internal loopback failed on ophir devices

6579605 Sunvts netlbtest internal loopback failed on Northstar fiber card

6595668 e1000g postinstall script missed 5 device ids which had been supported by shared code

5.2.3

======

This version has the following fix:

6335851 e1000g needs to support FMA

6605171 WARNING: pciex8086,105e - e1000g[0] : Initialize hw failed

5.2.4

======

This version has the following fix:

6619929 Sunvts test on Northstar QGC EM failed for "Not received any packets in loopback mode".

6541233 e1000g driver performs 33X Slower for Tibco RV when running Multiple RVDs

6572343 e1000g: needs to improve the ip forwarding performance

6637039 e1000g_recycle() missed a mutex_exit()

5.2.5

======

This version has the following fix:

6648775 e1000g: pci8086,10be - e1000g[0]: Identify hardware failed

5.2.6

======

This version has the following fix:

6633239 e1000g: link flaps observed on Galaxy(X4100) systems running 64-bit kernel

5.2.7

======

This version has the following fix:

6673650 e1000g needs to support Brussels

5.2.8

======

This version has the following fix:

6674179 SunFire X4150 panics at e1000g_receive

6679136 E1000g with patch 128028-03 will not allow pause frames to be set

6687947 e1000g needs to integrate the latest Intel shared code to support ICH9m

6699622 e1000g: add support for network device in new development machine

5.2.9

======

6665738 e1000g issues with some Ethernet controllers

6713685 e1000g:one device id macro should be renamed

5.2.10

======

This version has the following fixes:

6335837 e1000g needs to support LSO

6637659 e1000g has problem on transmit hardware checksum support

5.2.11

======

This version has the following fixes:

6698039 e1000g tx doesn't work on the specific chipset since snv_88

6597545 e1000g ESB2 serdes device pciex8086,1098 hangs in network testing

6693205 running sunvts7.0 on Generic s10u5build10 causes unix:cmi_mca_panic on thumper

6694279 e1000g driver: internal loopback mode support needed for nic ESB-2

6721574 max number of segments in e1000g_tx_dma_attr need to be updated when LSO is supported

5.2.12

======

This version has the following fix:

6634746 e1000g is missing lint target in Makefile

6705005 e1000g LINK/ACT LED behaviour is not consistent with the EEPROM default

6738552 e1000g rx_lock is not initialized and destroyed in the code

5.2.13

======

This version has the following fix:

6666998 Add support for ICH10 in e1000g driver

6709230 Requesting driver support in e1000g for new Intel(R) single port MAC/PHY NIC

6727113 e1000g performance regression is observed with large connection and packet size if LSO is enabled

6756917 LSO is not enabled on some e1000g chips

5.2.14

======

This version has the following fix:

6713032 e1000g port hang, no xmit, no recv

6767201 e1000g default_mtu does not coincide with max_frame_size on some chipsets when set via e1000g.conf

5.3.1

======

This version has the following fix:

6779610 e1000g fails to attach post-6713032 due to memory allocation failures on some chipsets

5.3.2

======

This version has the following fix:

6779494 e1000g need to sync with sol_anvik_patch shared code from Intel

6758857 fmadm reporting undiagnosable problems in snv_99

6698312 starcat panicked with "bad mutex" while running SUNWsgdr

6759330 PIT: panic during first reboot after successful pkgadd during osinstall

6776453 Monza(CP3260): loopback test fails on e1000g serdes ports

5.3.3

======

This version has the following fix:

6791863 sync up flow control code with Intel latest shared code

5.3.4

======

This version has the following fix:

6699662 global e1000g rwlock prevents scaling on multiple interfaces

6781905 super slow throughput on e1000g 82541 and 82547 chips

6786783 e1000g needs to have a new tx stall detection mechanism to cover 82546 errata No.18

5.3.5

======

This version has the following fix:

6732858 panic in e1000g_free_dma_buffer

5.3.6

======

This version has the following fixes:

6589577 Huron does not discard and does transmit frames greater than maxFrameSize

6809729 Panic in function 'e1000g_rxfree_func' on T2000

6809877 e1000g E1000G_IPALIGNROOM code can be rewritten

5.3.7

======

This version has the following fix:

6812227 e1000g(intel 82571 adapter) must support MTU size of 9216

5.3.8

======

This version has the following fixes:

6775380 the e1000g link hung at "up" state after down and unplumb the interface

6816786 e1000g panics on Lenovo X301 with snv_109

5.3.9

====

This version has the following fix:

6680929 dladm should print POSSIBLE values for properties like mtu by contacting the driver.

5.3.10

====

This version has the following fix:

6841089 Customer wants to be able to set MAX_NUM_MULTICAST_ADDRESSES above 256 on e1000g driver

5.3.11

====

This version has the following fix:

6848586 rw_enter()/rw_exit() could be called on uninitialized rw lock

5.3.12

====

This version has the following fixes:

6846262 T2000 fma shows fault.io.pciex.device-interr in snv_115

6870404 e1000g_reset can call e1000g_start after releasing dma resources

5.3.13

====

This version has the following fixes:

6681751 e1000g minor_perm inconsistent between package postinstall script and default minor_perm file

6855964 e1000g driver corrupting LSO packets causes chipset hang and significant performance regression

5.3.14

====

This version has the following fixes:

6820747 kstat output incorrect for MMF version of e1000g making it impossible to troubleshoot

6847888 HW initialization updates for 82541 and 82547 chips

5.3.15

======

This version has the following fixes:

6797885 need to add support for network device (8086,10ea) in a new Intel system

6803799 need to add network device support (8086,10ef) for a new Intel system

6808388 e1000g inteface experience packet lost when switch between joining and leaving a multicast stream

5.3.16

======

This version has the following fixes:

6881588 e1000g functions should return when e1000g_check_dma_handle() fails

6888320 e1000g emits scary mutex message on the console

5.3.17

======

This version has the following fixes:

6893285 e1000g 'pciex8086,105e' with PHY type igp I/O devices have been retired

6895459 e1000g share code update v3-1-10-1

5.3.18

======

This version has the following fix:

6894476 e1000g is not lint clean

5.3.19

======

This version has the following fix:

6877343 e1000g's default tx/rx resource consumption too high for jumbograms

5.3.20

======

This version has the following fixes:

6901523 e1000g does not return failure when setting external loopback fails

6903712 Cannot install on DQ45EK system due to e1000g driver alias

6909097 e1000g specifies incorrect flag when allocating tx DMA buffers

6909553 e1000g stall reset leaves GLDv3 link state as "unknown"

5.3.21

======

This version has the following fix:

6909134 e1000g doesn't use ddi_get/ddi_put to access its IO space

5.3.22

======

This version has the following fixes:

6903292 Running flag not set on IPMP underlying e1000g interfaces

6913835 e1000g driver passes bad messages up the stack when jumbograms received

6919873 panic: BAD TRAP: type=e (#pf Page fault) in module "e1000g" during ifconfig plumb group ipmp0

5.3.23

=====

This version has the following fixes:

6838180 tcp corruption seen with northstar cards

6925276 e1000g not consistent with link_lock usage

6933844 NULL ptr deref in e1000g_rx_setup() due to inconsistency between recv_list & rx_desc_num

5.3.24

=====

This version has the following fixes:

6861114 System Panics with FMA ereport.io.fire.epkt

6876953 Memory leaks found in e1000g_alloc_rx_sw_packet on snv_111b

6945160 netlbtest fails with Can't set loopback mode on device e1000g6

6960959 panic in e1000g_receive

6965855 e1000g(intel 82571 adapter) needs to support MTU size of 9000

6967530 Need version in e1000g driver

6967873 e1000g needs to clear the link-down status when being unplumbed