/vbox/src/VBox/Devices/EFI/Firmware/MdeModulePkg/Bus/Pci/PciBusDxe/ |
H A D | PciCommand.c | 21 @param Command Operator command. 32 IN UINT16 Command, 61 OldCommand = (UINT16) (OldCommand | Command); 63 OldCommand = (UINT16) (OldCommand & ~(Command)); 65 OldCommand = Command; 30 PciOperateRegister( IN PCI_IO_DEVICE *PciIoDevice, IN UINT16 Command, IN UINT8 Offset, IN UINT8 Operation, OUT UINT16 *PtrCommand ) argument
|
H A D | PciIo.c | 1498 UINT16 Command; local 1599 Command = 0; 1616 Command |= EFI_PCI_IO_ATTRIBUTE_VGA_PALETTE_IO; 1678 Command |= EFI_PCI_COMMAND_VGA_PALETTE_SNOOP; 1683 Command |= EFI_PCI_COMMAND_IO_SPACE; 1687 Command |= EFI_PCI_COMMAND_MEMORY_SPACE; 1691 Command |= EFI_PCI_COMMAND_BUS_MASTER; 1709 Status = PCI_ENABLE_COMMAND_REGISTER (PciIoDevice, Command); 1730 Status = PCI_DISABLE_COMMAND_REGISTER (PciIoDevice, Command);
|
H A D | PciEnumeratorSupport.c | 847 @param Command Input command register value, and 858 IN OUT UINT16 *Command, 876 PCI_SET_COMMAND_REGISTER (PciIoDevice, *Command); 877 PCI_READ_COMMAND_REGISTER (PciIoDevice, Command); 924 @param Command Command register value. 932 IN UINT16 Command, 941 if ((Command & EFI_PCI_COMMAND_IO_SPACE) != 0) { 945 if ((Command & EFI_PCI_COMMAND_MEMORY_SPACE) != 0) { 949 if ((Command 856 PciTestSupportedAttribute( IN PCI_IO_DEVICE *PciIoDevice, IN OUT UINT16 *Command, IN OUT UINT16 *BridgeControl, OUT UINT16 *OldCommand, OUT UINT16 *OldBridgeControl ) argument 930 PciSetDeviceAttribute( IN PCI_IO_DEVICE *PciIoDevice, IN UINT16 Command, IN UINT16 BridgeControl, IN UINTN Option ) argument 1122 UINT16 Command; local [all...] |
/vbox/src/VBox/Devices/EFI/Firmware/ShellPkg/Library/UefiShellLevel3CommandsLib/ |
H A D | Alias.c | 33 CONST CHAR16 *Command; local 56 Command = gEfiShellProtocol->GetAlias(Alias, &Volatile); 60 ShellPrintHiiEx(-1, -1, NULL, STRING_TOKEN (STR_ALIAS_OUTPUT), gShellLevel3HiiHandle, !Volatile?L' ':L'*', Alias, Command);
|
/vbox/src/VBox/Devices/EFI/Firmware/MdeModulePkg/Bus/Pci/UhciDxe/ |
H A D | UhciReg.c | 270 UINT16 Command; local 272 Command = 0; 279 &Command
|
H A D | Uhci.c | 431 UINT16 Command; local 446 Command = UhciReadReg (Uhc->PciIo, USBCMD_OFFSET); 447 if ((Command & USBCMD_EGSM) == 0) {
|
/vbox/src/VBox/Devices/EFI/Firmware/MdeModulePkg/Include/Guid/ |
H A D | SmmLockBox.h | 34 UINT32 Command; member in struct:__anon11010
|
/vbox/src/VBox/Devices/EFI/Firmware/MdeModulePkg/Bus/Usb/UsbBotPei/ |
H A D | BotPeim.c | 88 BOT transfer is composed of three phases: Command, Data, and Status. 89 This is the Command phase. 93 @param Command The command to transfer to device. 108 IN VOID *Command, 134 CopyMem (Cbw.CmdBlock, Command, CommandSize); 148 // Command phase fail, we need to recovery reset this device 161 BOT transfer is composed of three phases: Command, Data, and Status. 251 BOT transfer is composed of three phases: Command, Data, and Status. 315 @param Command The command to be sent to ATAPI device. 331 IN VOID *Command, 105 BotCommandPhase( IN EFI_PEI_SERVICES **PeiServices, IN PEI_BOT_DEVICE *PeiBotDev, IN VOID *Command, IN UINT8 CommandSize, IN UINT32 DataTransferLength, IN EFI_USB_DATA_DIRECTION Direction, IN UINT16 Timeout ) argument 328 PeiAtapiCommand( IN EFI_PEI_SERVICES **PeiServices, IN PEI_BOT_DEVICE *PeiBotDev, IN VOID *Command, IN UINT8 CommandSize, IN VOID *DataBuffer, IN UINT32 BufferLength, IN EFI_USB_DATA_DIRECTION Direction, IN UINT16 TimeOutInMilliSeconds ) argument [all...] |
/vbox/src/VBox/Devices/EFI/Firmware/ShellPkg/Application/Shell/ |
H A D | ShellManParser.c | 350 "Brief Description" for the .TH section as specified by Command. If the 356 @param[in] Command name of command's section to find 368 IN CONST CHAR16 *Command, 379 || Command == NULL 387 TitleString = AllocateZeroPool((7*sizeof(CHAR16)) + StrSize(Command)); 392 StrCat(TitleString, Command); 437 "Brief Description" for the .TH section as specified by Command. if the 443 @param[in] Command name of command's section to find 457 IN CONST CHAR16 *Command, 472 || Command 366 ManBufferFindTitleSection( IN CHAR16 **Buffer, IN CONST CHAR16 *Command, IN CHAR16 **BriefDesc, IN UINTN *BriefSize ) argument 455 ManFileFindTitleSection( IN SHELL_FILE_HANDLE Handle, IN CONST CHAR16 *Command, OUT CHAR16 **BriefDesc OPTIONAL, OUT UINTN *BriefSize OPTIONAL, IN OUT BOOLEAN *Ascii ) argument 573 ProcessManFile( IN CONST CHAR16 *ManFileName, IN CONST CHAR16 *Command, IN CONST CHAR16 *Sections OPTIONAL, OUT CHAR16 **BriefDesc OPTIONAL, OUT CHAR16 **HelpText ) argument [all...] |
/vbox/src/VBox/Devices/EFI/Firmware/IntelFrameworkModulePkg/Bus/Isa/Ps2KeyboardDxe/ |
H A D | Ps2KbdCtrller.c | 1105 UINT8 Command; local 1120 Command = 0; 1122 Command |= 4; 1126 Command |= 2; 1130 Command |= 1; 1133 Status = KeyboardWrite (ConsoleIn, Command); 1625 // Write 8042 Command Byte, set System Flag 1632 // ( Command Byte bits: 1850 Check whether there is Ps/2 Keyboard device in system by 0xF4 Keyboard Command
|
/vbox/src/VBox/Devices/EFI/Firmware/IntelFrameworkModulePkg/Bus/Isa/Ps2MouseAbsolutePointerDxe/ |
H A D | CommPs2.c | 313 UINT8 Command; local 315 Command = (UINT8) (Scaling == Scaling1 ? SETSF1_CMD : SETSF2_CMD); 320 return Out8042AuxCommand (IsaIo, Command, FALSE); 541 @param Command I/O command. 549 IN UINT8 Command 565 Data = Command; 659 @param Command Aux I/O command 668 IN UINT8 Command, 695 IsaIo->Io.Write (IsaIo, EfiIsaIoWidthUint8, KBC_DATA_PORT, 1, &Command); 721 Status = Out8042AuxCommand (IsaIo, Command, TRU 666 Out8042AuxCommand( IN EFI_ISA_IO_PROTOCOL *IsaIo, IN UINT8 Command, IN BOOLEAN Resend ) argument [all...] |
/vbox/src/VBox/Devices/EFI/Firmware/IntelFrameworkModulePkg/Bus/Isa/Ps2MouseDxe/ |
H A D | CommPs2.c | 313 UINT8 Command; local 315 Command = (UINT8) (Scaling == Scaling1 ? SETSF1_CMD : SETSF2_CMD); 320 return Out8042AuxCommand (IsaIo, Command, FALSE); 540 @param Command I/O command. 548 IN UINT8 Command 564 Data = Command; 658 @param Command Aux I/O command 667 IN UINT8 Command, 694 IsaIo->Io.Write (IsaIo, EfiIsaIoWidthUint8, KBC_DATA_PORT, 1, &Command); 720 Status = Out8042AuxCommand (IsaIo, Command, TRU 665 Out8042AuxCommand( IN EFI_ISA_IO_PROTOCOL *IsaIo, IN UINT8 Command, IN BOOLEAN Resend ) argument [all...] |
/vbox/src/VBox/Devices/EFI/Firmware/MdeModulePkg/Bus/Pci/IdeBusPei/ |
H A D | AtapiPeim.h | 58 UINT16 Command; /* when write */ member in union:__anon10822 438 Sends out ATAPI Test Unit Ready Packet Command to the specified device 455 Send out ATAPI commands conforms to the Packet Command with PIO Data In Protocol. 464 @retval EFI_SUCCESS Command executed successfully. 479 Sends out ATAPI Inquiry Packet Command to the specified device. 486 @retval EFI_SUCCESS Command executed successfully. 507 @retval EFI_SUCCESS Command executed successfully. 526 @retval EFI_SUCCESS Command executed successfully. 538 Sends out ATAPI Request Sense Packet Command to the specified device. 545 @retval EFI_SUCCESS Command execute [all...] |
H A D | AtapiPeim.c | 375 // Get four channels (primary or secondary Pata, Sata Channel) Command and Control Regs Base address. 384 // Using Command and Control Regs Base Address to fill other registers. 395 AtapiBlkIoDev->IdeIoPortReg[Index1].Reg.Command = (UINT16) (CommandBlockBaseAddr + 0x7); 480 @param[in] AtaCommand The Ata Command passed in. 514 CommandRegister = AtapiBlkIoDev->IdeIoPortReg[Channel].Reg.Command; 541 // send 'check power' commandd via Command Register 1064 CommandReg = AtapiBlkIoDev->IdeIoPortReg[Channel].Reg.Command; 1072 // Send ATAPI Identify Command to get IDENTIFY data. 1113 // send command via Command Register 1182 Sends out ATAPI Test Unit Ready Packet Command t 1686 UINT8 Command; local [all...] |
/vbox/src/VBox/Devices/EFI/Firmware/MdeModulePkg/Universal/Acpi/S3SaveStateDxe/ |
H A D | S3SaveState.c | 266 EFI_SMBUS_DEVICE_COMMAND Command; local 274 Command = VA_ARG (Marker, EFI_SMBUS_DEVICE_COMMAND); 277 SmBusAddress = SMBUS_LIB_ADDRESS (SlaveAddress.SmbusDeviceAddress,Command,0,PecCheck);
|
/vbox/src/VBox/Devices/EFI/Firmware/MdeModulePkg/Universal/Acpi/SmmS3SaveState/ |
H A D | SmmS3SaveState.c | 265 EFI_SMBUS_DEVICE_COMMAND Command; local 273 Command = VA_ARG (Marker, EFI_SMBUS_DEVICE_COMMAND); 276 SmBusAddress = SMBUS_LIB_ADDRESS (SlaveAddress.SmbusDeviceAddress,Command,0,PecCheck);
|
/vbox/src/VBox/Devices/EFI/Firmware/MdePkg/Include/IndustryStandard/ |
H A D | AlertStandardFormatTable.h | 52 UINT8 Command; member in struct:__anon11596 85 UINT8 Command; member in struct:__anon11598
|
/vbox/src/VBox/Devices/EFI/Firmware/IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/ |
H A D | IsaFloppyCtrl.c | 396 FDD_SPECIFY_CMD Command; local 400 ZeroMem (&Command, sizeof (FDD_SPECIFY_CMD)); 401 Command.CommandCode = SPECIFY_CMD; 405 Command.SrtHut = 0xdf; 411 Command.HltNd = 0x02; 413 CommandPointer = (UINT8 *) (&Command); 436 FDD_COMMAND_PACKET2 Command; local 446 ZeroMem (&Command, sizeof (FDD_COMMAND_PACKET2)); 447 Command.CommandCode = RECALIBRATE_CMD; 452 Command 513 FDD_SEEK_CMD Command; local 620 UINT8 Command; local 655 FDD_COMMAND_PACKET2 Command; local 834 FDD_COMMAND_PACKET1 Command; local [all...] |
/vbox/src/VBox/Devices/EFI/Firmware/IntelFrameworkModulePkg/Bus/Isa/IsaFloppyPei/ |
H A D | FloppyPeim.c | 287 Command bytes can not be written to Data Register unless RQM is 1 and DIO is 0. 432 UINT8 Command; local 434 Command = SENSE_INT_STATUS_CMD; 436 if (DataOutByte (FdcBlkIoDev, &Command) != EFI_SUCCESS) { 465 FDC_SPECIFY_CMD Command; local 469 ZeroMem (&Command, sizeof (FDC_SPECIFY_CMD)); 470 Command.CommandCode = SPECIFY_CMD; 474 Command.SrtHut = 0xdf; 479 Command.HltNd = 0x02; 481 Pointer = (UINT8 *) (&Command); 745 FDC_COMMAND_PACKET2 Command; local 826 FDC_SEEK_CMD Command; local 1380 FDC_COMMAND_PACKET1 Command; local [all...] |
/vbox/src/VBox/Devices/EFI/Firmware/IntelFrameworkModulePkg/Bus/Pci/IdeBusDxe/ |
H A D | Atapi.c | 27 @retval EFI_DEVICE_ERROR Get Media Status Command is failed. 68 // Get Media Status Command is sent 70 IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Reg.Command, 0xDA); 96 This function is used to send Enable Media Status Notification Command 97 or Disable Media Status Notification Command. 152 // Set Feature Command is sent 154 IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Reg.Command, 0xEF); 329 This function is used to send out ATAPI commands conforms to the Packet Command 407 IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Reg.Command, ATA_CMD_PACKET); 431 This function is used to send out ATAPI commands conforms to the Packet Command 1663 UINT8 Command; local [all...] |
H A D | IdeData.h | 66 UINT16 Command; /* when write */ member in union:__anon10347
|
/vbox/src/VBox/Devices/EFI/Firmware/IntelFrameworkModulePkg/Csm/BiosThunk/KeyboardDxe/ |
H A D | BiosKeyboard.c | 205 UINT8 Command; local 370 Command = 0; 372 Command |= 4; 376 Command |= 2; 380 Command |= 1; 385 KeyboardWrite (BiosKeyboardPrivate, Command); 389 LegacyBios->UpdateKeyboardLedStatus (LegacyBios, Command); 775 @param Data Command byte to write. 1148 // Write 8042 Command Byte, set System Flag 1155 //Command Byt 2155 UINT8 Command; local [all...] |
/vbox/src/VBox/Devices/EFI/Firmware/MdeModulePkg/Library/PiDxeS3BootScriptLib/ |
H A D | BootScriptExecute.c | 25 @param SmBusAddress Address that encodes the SMBUS Slave Address, SMBUS Command, SMBUS Data Length, 60 EFI_SMBUS_DEVICE_COMMAND Command; local 63 Command = SMBUS_LIB_COMMAND (SmBusAddress); 74 if (PecCheck || Command != 0) { 80 if (Command != 0) { 127 @param SmbusAddress Address that encodes the SMBUS Slave Address, SMBUS Command, SMBUS Data Length,
|
/vbox/src/VBox/Devices/EFI/Firmware/OptionRomPkg/AtapiPassThruDxe/ |
H A D | AtapiPassThru.c | 894 UINT8 Command; local 928 Command = ATAPI_SOFT_RESET_CMD; 929 WritePortB (AtapiScsiPrivate->PciIo, AtapiScsiPrivate->IoPort->Reg.Command, Command); 1407 UINT8 Command; local 1444 Command = ATAPI_SOFT_RESET_CMD; 1445 WritePortB (AtapiScsiPrivate->PciIo, AtapiScsiPrivate->IoPort->Reg.Command, Command); 1663 // Initialize IDE IO port addresses, including Command Block registers 1761 // Check whether the requested Command i [all...] |
/vbox/src/VBox/Devices/EFI/Firmware/ShellPkg/Library/UefiShellCommandLib/ |
H A D | UefiShellCommandLib.c | 77 Constructor for the Shell Command library. 551 If Command is NULL, then ASSERT(). 554 @param[in] Command Pointer to the Command 564 IN CONST CHAR16 *Command, 573 ASSERT(Command != NULL); 581 Node->CommandString = AllocateZeroPool(StrSize(Command)); 589 StrCpy(Node->CommandString, Command); 563 ShellCommandRegisterAlias( IN CONST CHAR16 *Command, IN CONST CHAR16 *Alias ) argument
|