; $Id$
; @file
; VBoxGuestAdditionsNT4.nsh - Guest Additions installation for NT4.
;
;
; Copyright (C) 2006-2013 Oracle Corporation
;
; This file is part of VirtualBox Open Source Edition (OSE), as
; available from http://www.virtualbox.org. This file is free software;
; you can redistribute it and/or modify it under the terms of the GNU
; General Public License (GPL) as published by the Free Software
; Foundation, in version 2 as it comes in the "COPYING" file of the
; VirtualBox OSE distribution. VirtualBox OSE is distributed in the
; hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
;
Function NT4_SetVideoResolution
; Check for all required parameters
StrCmp $g_iScreenX "0" missingParms
StrCmp $g_iScreenY "0" missingParms
StrCmp $g_iScreenBpp "0" missingParms
Goto haveParms
missingParms:
${LogVerbose} "Missing display parameters for NT4, setting default (640x480, 8 BPP) ..."
StrCpy $g_iScreenX '640' ; Default value
StrCpy $g_iScreenY '480' ; Default value
StrCpy $g_iScreenBpp '8' ; Default value
; Write setting into registry to show the desktop applet on next boot
WriteRegStr HKLM "SYSTEM\CurrentControlSet\Control\GraphicsDrivers\NewDisplay" "" ""
haveParms:
${LogVerbose} "Setting display parameters for NT4 ($g_iScreenXx$g_iScreenY, $g_iScreenBpp BPP) ..."
WriteRegDWORD HKLM "SYSTEM\CurrentControlSet\Hardware Profiles\Current\System\CurrentControlSet\Services\vboxvideo\Device0" "DefaultSettings.BitsPerPel" $g_iScreenBpp
WriteRegDWORD HKLM "SYSTEM\CurrentControlSet\Hardware Profiles\Current\System\CurrentControlSet\Services\vboxvideo\Device0" "DefaultSettings.Flags" 0x00000000
WriteRegDWORD HKLM "SYSTEM\CurrentControlSet\Hardware Profiles\Current\System\CurrentControlSet\Services\vboxvideo\Device0" "DefaultSettings.VRefresh" 0x00000001
WriteRegDWORD HKLM "SYSTEM\CurrentControlSet\Hardware Profiles\Current\System\CurrentControlSet\Services\vboxvideo\Device0" "DefaultSettings.XPanning" 0x00000000
WriteRegDWORD HKLM "SYSTEM\CurrentControlSet\Hardware Profiles\Current\System\CurrentControlSet\Services\vboxvideo\Device0" "DefaultSettings.XResolution" $g_iScreenX
WriteRegDWORD HKLM "SYSTEM\CurrentControlSet\Hardware Profiles\Current\System\CurrentControlSet\Services\vboxvideo\Device0" "DefaultSettings.YPanning" 0x00000000
WriteRegDWORD HKLM "SYSTEM\CurrentControlSet\Hardware Profiles\Current\System\CurrentControlSet\Services\vboxvideo\Device0" "DefaultSettings.YResolution" $g_iScreenY
FunctionEnd
Function NT4_SaveMouseDriverInfo
Push $0
; !!! NOTE !!!
; Due to some re-branding (see functions Uninstall_Sun, Uninstall_Innotek and
; Uninstall_SunXVM) the installer *has* to transport the very first saved i8042prt
; value to the current installer's "uninstall" directory in both mentioned
; functions above, otherwise NT4 will be screwed because it then would store
; "VBoxMouseNT.sys" as the original i8042prt driver which obviously isn't there
; after uninstallation anymore
; !!! NOTE !!!
; Save current mouse driver info so we may restore it on uninstallation
; But first check if we already installed the additions otherwise we will
; overwrite it with the VBoxMouseNT.sys
ReadRegStr $0 HKLM "${PRODUCT_UNINST_KEY}" ${ORG_MOUSE_PATH}
StrCmp $0 "" 0 exists
${LogVerbose} "Saving mouse driver info ..."
ReadRegStr $0 HKLM "SYSTEM\CurrentControlSet\Services\i8042prt" "ImagePath"
WriteRegStr HKLM "${PRODUCT_UNINST_KEY}" ${ORG_MOUSE_PATH} $0
Goto exit
exists:
${LogVerbose} "Mouse driver info already saved."
Goto exit
exit:
!ifdef _DEBUG
${LogVerbose} "Mouse driver info: $0"
!endif
Pop $0
FunctionEnd
Function NT4_Prepare
${If} $g_bNoVBoxServiceExit == "false"
; Stop / kill VBoxService
Call StopVBoxService
${EndIf}
${If} $g_bNoVBoxTrayExit == "false"
; Stop / kill VBoxTray
Call StopVBoxTray
${EndIf}
; Delete VBoxService from registry
DeleteRegValue HKLM "Software\Microsoft\Windows\CurrentVersion\Run" "VBoxService"
; Delete old VBoxService.exe from install directory (replaced by VBoxTray.exe)
Delete /REBOOTOK "$INSTDIR\VBoxService.exe"
FunctionEnd
Function NT4_CopyFiles
${LogVerbose} "Copying files for NT4 ..."
SetOutPath "$INSTDIR"
FILE "$%PATH_OUT%\bin\additions\VBoxGuestDrvInst.exe"
FILE "$%PATH_OUT%\bin\additions\RegCleanup.exe"
; The files to install for NT 4, they go into the system directories
SetOutPath "$SYSDIR"
FILE "$%PATH_OUT%\bin\additions\VBoxDisp.dll"
FILE "$%PATH_OUT%\bin\additions\VBoxTray.exe"
FILE "$%PATH_OUT%\bin\additions\VBoxHook.dll"
FILE "$%PATH_OUT%\bin\additions\VBoxControl.exe"
; VBoxService
FILE "$%PATH_OUT%\bin\additions\VBoxServiceNT.exe"
; The drivers into the "drivers" directory
SetOutPath "$SYSDIR\drivers"
FILE "$%PATH_OUT%\bin\additions\VBoxVideo.sys"
FILE "$%PATH_OUT%\bin\additions\VBoxMouseNT.sys"
FILE "$%PATH_OUT%\bin\additions\VBoxGuestNT.sys"
;FILE "$%PATH_OUT%\bin\additions\VBoxSFNT.sys" ; Shared Folders not available on NT4!
FunctionEnd
Function NT4_InstallFiles
${LogVerbose} "Installing drivers for NT4 ..."
; Install guest driver
${CmdExecute} "$\"$INSTDIR\VBoxDrvInst.exe$\" service create $\"VBoxGuest$\" $\"VBoxGuest Support Driver$\" 1 1 $\"$SYSDIR\drivers\VBoxGuestNT.sys$\" $\"Base$\"" "false"
; Bugfix: Set "Start" to 1, otherwise, VBoxGuest won't start on boot-up!
; Bugfix: Correct invalid "ImagePath" (\??\C:\WINNT\...)
WriteRegDWORD HKLM "SYSTEM\CurrentControlSet\Services\VBoxGuest" "Start" 1
WriteRegStr HKLM "SYSTEM\CurrentControlSet\Services\VBoxGuest" "ImagePath" "System32\Drivers\VBoxGuestNT.sys"
; Run VBoxTray when Windows NT starts
WriteRegStr HKLM "Software\Microsoft\Windows\CurrentVersion\Run" "VBoxTray" '"$SYSDIR\VBoxTray.exe"'
; Video driver
${CmdExecute} "$\"$INSTDIR\VBoxGuestDrvInst.exe$\" /i" "false"
${LogVerbose} "Installing VirtualBox service ..."
; Create the VBoxService service
; No need to stop/remove the service here! Do this only on uninstallation!
${CmdExecute} "$\"$INSTDIR\VBoxDrvInst.exe$\" service create $\"VBoxService$\" $\"VirtualBox Guest Additions Service$\" 16 2 $\"system32\VBoxServiceNT.exe$\" $\"Base$\"" "false"
; Create the Shared Folders service ...
;nsSCM::Install /NOUNLOAD "VBoxSF" "VirtualBox Shared Folders" 1 1 "$SYSDIR\drivers\VBoxSFNT.sys" "Network" "" "" ""
;Pop $0 ; Ret value
!ifdef _DEBUG
;${LogVerbose} "SCM::Install VBoxSFNT.sys: $0"
!endif
;IntCmp $0 0 +1 error error ; Check ret value (0=OK, 1=Error)
; ... and the link to the network provider
;WriteRegStr HKLM "SYSTEM\CurrentControlSet\Services\VBoxSF\NetworkProvider" "DeviceName" "\Device\VBoxMiniRdr"
;WriteRegStr HKLM "SYSTEM\CurrentControlSet\Services\VBoxSF\NetworkProvider" "Name" "VirtualBox Shared Folders"
;WriteRegStr HKLM "SYSTEM\CurrentControlSet\Services\VBoxSF\NetworkProvider" "ProviderPath" "$SYSDIR\VBoxMRXNP.dll"
; Add the shared folders network provider
;${CmdExecute} "$\"$INSTDIR\VBoxDrvInst.exe$\" netprovider add VBoxSF" "false"
Goto done
error:
Abort "ERROR: Could not install files for Windows NT4! Installation aborted."
done:
FunctionEnd
Function NT4_Main
SetOutPath "$INSTDIR"
Call NT4_Prepare
Call NT4_CopyFiles
; This removes the flag "new display driver installed on the next bootup
WriteRegStr HKLM "Software\Microsoft\Windows\CurrentVersion\RunOnce" "VBoxGuestInst" '"$INSTDIR\RegCleanup.exe"'
Call NT4_SaveMouseDriverInfo
Call NT4_InstallFiles
Call NT4_SetVideoResolution
; Write mouse driver name to registry overwriting the default name
WriteRegStr HKLM "SYSTEM\CurrentControlSet\Services\i8042prt" "ImagePath" "System32\DRIVERS\VBoxMouseNT.sys"
FunctionEnd
!macro NT4_UninstallInstDir un
Function ${un}NT4_UninstallInstDir
; Delete remaining files
Delete /REBOOTOK "$INSTDIR\VBoxGuestDrvInst.exe"
Delete /REBOOTOK "$INSTDIR\RegCleanup.exe"
FunctionEnd
!macroend
!insertmacro NT4_UninstallInstDir ""
!insertmacro NT4_UninstallInstDir "un."
!macro NT4_Uninstall un
Function ${un}NT4_Uninstall
Push $0
; Remove the guest driver service
${CmdExecute} "$\"$INSTDIR\VBoxDrvInst.exe$\" service delete VBoxGuest" "true"
Delete /REBOOTOK "$SYSDIR\drivers\VBoxGuestNT.sys"
; Delete the VBoxService service
Call ${un}StopVBoxService
${CmdExecute} "$\"$INSTDIR\VBoxDrvInst.exe$\" service delete VBoxService" "true"
DeleteRegValue HKLM "Software\Microsoft\Windows\CurrentVersion\Run" "VBoxService"
Delete /REBOOTOK "$SYSDIR\VBoxServiceNT.exe"
; Delete the VBoxTray app
Call ${un}StopVBoxTray
DeleteRegValue HKLM "Software\Microsoft\Windows\CurrentVersion\Run" "VBoxTray"
WriteRegStr HKLM "Software\Microsoft\Windows\CurrentVersion\RunOnce" "VBoxTrayDel" "$SYSDIR\cmd.exe /c del /F /Q $SYSDIR\VBoxTray.exe"
Delete /REBOOTOK "$SYSDIR\VBoxTray.exe" ; If it can't be removed cause it's running, try next boot with "RunOnce" key above!
Delete /REBOOTOK "$SYSDIR\VBoxHook.dll"
; Delete the VBoxControl utility
Delete /REBOOTOK "$SYSDIR\VBoxControl.exe"
; Delete the VBoxVideo service
${CmdExecute} "$\"$INSTDIR\VBoxDrvInst.exe$\" service delete VBoxVideo" "true"
; Delete the VBox video driver files
Delete /REBOOTOK "$SYSDIR\drivers\VBoxVideo.sys"
Delete /REBOOTOK "$SYSDIR\VBoxDisp.dll"
; Get original mouse driver info and restore it
ReadRegStr $0 ${PRODUCT_UNINST_ROOT_KEY} "${PRODUCT_UNINST_KEY}" ${ORG_MOUSE_PATH}
; If we still got our driver stored in $0 then this will *never* work, so
; warn the user and set it to the default driver to not screw up NT4 here
${If} $0 == "System32\DRIVERS\VBoxMouseNT.sys"
WriteRegStr HKLM "SYSTEM\CurrentControlSet\Services\i8042prt" "ImagePath" "System32\DRIVERS\i8042prt.sys"
${LogVerbose} "Old mouse driver is set to VBoxMouseNT.sys, defaulting to i8042prt.sys ..."
${Else}
WriteRegStr HKLM "SYSTEM\CurrentControlSet\Services\i8042prt" "ImagePath" $0
${EndIf}
Delete /REBOOTOK "$SYSDIR\drivers\VBoxMouseNT.sys"
Pop $0
FunctionEnd
!macroend
!insertmacro NT4_Uninstall ""
!insertmacro NT4_Uninstall "un."