/** @file
* VUSB - VirtualBox USB. (DEV,VMM)
*/
/*
* Copyright (C) 2006-2012 Oracle Corporation
*
* This file is part of VirtualBox Open Source Edition (OSE), as
* available from http://www.virtualbox.org. This file is free software;
* you can redistribute it and/or modify it under the terms of the GNU
* General Public License (GPL) as published by the Free Software
* Foundation, in version 2 as it comes in the "COPYING" file of the
* VirtualBox OSE distribution. VirtualBox OSE is distributed in the
* hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
*
* The contents of this file may alternatively be used under the terms
* of the Common Development and Distribution License Version 1.0
* (CDDL) only, as it comes in the "COPYING.CDDL" file of the
* VirtualBox OSE distribution, in which case the provisions of the
* CDDL are applicable instead of those of the GPL.
*
* You may elect to license modified versions of this file under the
* terms and conditions of either the GPL or the CDDL or both.
*/
#ifndef ___VBox_vusb_h
#define ___VBox_vusb_h
#include <VBox/cdefs.h>
#include <VBox/types.h>
#include <iprt/queueatomic.h>
struct PDMLED;
RT_C_DECLS_BEGIN
/** @defgroup grp_vusb VBox USB API
* @{
*/
/** @defgroup grp_vusb_std Standard Stuff
* @{ */
/** Frequency of USB bus (from spec). */
#define VUSB_BUS_HZ 12000000
/** @name USB Descriptor types (from spec)
* @{ */
#define VUSB_DT_DEVICE 0x01
#define VUSB_DT_CONFIG 0x02
#define VUSB_DT_STRING 0x03
#define VUSB_DT_INTERFACE 0x04
#define VUSB_DT_ENDPOINT 0x05
#define VUSB_DT_DEVICE_QUALIFIER 0x06
#define VUSB_DT_OTHER_SPEED_CFG 0x07
#define VUSB_DT_INTERFACE_POWER 0x08
#define VUSB_DT_INTERFACE_ASSOCIATION 0x0B
#define VUSB_DT_BOS 0x0F
#define VUSB_DT_DEVICE_CAPABILITY 0x10
#define VUSB_DT_SS_ENDPOINT_COMPANION 0x30
/** @} */
/** @name USB Descriptor minimum sizes (from spec)
* @{ */
#define VUSB_DT_DEVICE_MIN_LEN 18
#define VUSB_DT_CONFIG_MIN_LEN 9
#define VUSB_DT_CONFIG_STRING_MIN_LEN 2
#define VUSB_DT_INTERFACE_MIN_LEN 9
#define VUSB_DT_ENDPOINT_MIN_LEN 7
#define VUSB_DT_SSEP_COMPANION_MIN_LEN 6
/** @} */
/** @name USB Device Capability Type Codes (from spec)
* @{ */
#define VUSB_DCT_WIRELESS_USB 0x01
#define VUSB_DCT_USB_20_EXTENSION 0x02
#define VUSB_DCT_SUPERSPEED_USB 0x03
#define VUSB_DCT_CONTAINER_ID 0x04
/** @} */
#pragma pack(1) /* ensure byte packing of the descriptors. */
/**
* USB language id descriptor (from specs).
*/
typedef struct VUSBDESCLANGID
{
uint8_t bLength;
uint8_t bDescriptorType;
} VUSBDESCLANGID;
/** Pointer to a USB language id descriptor. */
typedef VUSBDESCLANGID *PVUSBDESCLANGID;
/** Pointer to a const USB language id descriptor. */
typedef const VUSBDESCLANGID *PCVUSBDESCLANGID;
/**
* USB string descriptor (from specs).
*/
typedef struct VUSBDESCSTRING
{
uint8_t bLength;
uint8_t bDescriptorType;
} VUSBDESCSTRING;
/** Pointer to a USB string descriptor. */
typedef VUSBDESCSTRING *PVUSBDESCSTRING;
/** Pointer to a const USB string descriptor. */
typedef const VUSBDESCSTRING *PCVUSBDESCSTRING;
/**
* USB device descriptor (from spec)
*/
typedef struct VUSBDESCDEVICE
{
uint8_t bLength;
uint8_t bDescriptorType;
uint16_t bcdUSB;
uint8_t bDeviceClass;
uint8_t bDeviceSubClass;
uint8_t bDeviceProtocol;
uint8_t bMaxPacketSize0;
uint16_t idVendor;
uint16_t idProduct;
uint16_t bcdDevice;
uint8_t iManufacturer;
uint8_t iProduct;
uint8_t iSerialNumber;
uint8_t bNumConfigurations;
} VUSBDESCDEVICE;
/** Pointer to a USB device descriptor. */
typedef VUSBDESCDEVICE *PVUSBDESCDEVICE;
/** Pointer to a const USB device descriptor. */
typedef const VUSBDESCDEVICE *PCVUSBDESCDEVICE;
/**
* USB device qualifier (from spec 9.6.2)
*/
struct VUSBDEVICEQUALIFIER
{
uint8_t bLength;
uint8_t bDescriptorType;
uint16_t bcdUsb;
uint8_t bDeviceClass;
uint8_t bDeviceSubClass;
uint8_t bDeviceProtocol;
uint8_t bMaxPacketSize0;
uint8_t bNumConfigurations;
uint8_t bReserved;
};
typedef struct VUSBDEVICEQUALIFIER VUSBDEVICEQUALIFIER;
typedef VUSBDEVICEQUALIFIER *PVUSBDEVICEQUALIFIER;
/**
* USB configuration descriptor (from spec).
*/
typedef struct VUSBDESCCONFIG
{
uint8_t bLength;
uint8_t bDescriptorType;
uint16_t wTotalLength; /**< recalculated by VUSB when involved in URB. */
uint8_t bNumInterfaces;
uint8_t bConfigurationValue;
uint8_t iConfiguration;
uint8_t bmAttributes;
uint8_t MaxPower;
} VUSBDESCCONFIG;
/** Pointer to a USB configuration descriptor. */
typedef VUSBDESCCONFIG *PVUSBDESCCONFIG;
/** Pointer to a readonly USB configuration descriptor. */
typedef const VUSBDESCCONFIG *PCVUSBDESCCONFIG;
/**
* USB interface association descriptor (from USB ECN Interface Association Descriptors)
*/
typedef struct VUSBDESCIAD
{
uint8_t bLength;
uint8_t bDescriptorType;
uint8_t bFirstInterface;
uint8_t bInterfaceCount;
uint8_t bFunctionClass;
uint8_t bFunctionSubClass;
uint8_t bFunctionProtocol;
uint8_t iFunction;
} VUSBDESCIAD;
/** Pointer to a USB interface association descriptor. */
typedef VUSBDESCIAD *PVUSBDESCIAD;
/** Pointer to a readonly USB interface association descriptor. */
typedef const VUSBDESCIAD *PCVUSBDESCIAD;
/**
* USB interface descriptor (from spec)
*/
typedef struct VUSBDESCINTERFACE
{
uint8_t bLength;
uint8_t bDescriptorType;
uint8_t bInterfaceNumber;
uint8_t bAlternateSetting;
uint8_t bNumEndpoints;
uint8_t bInterfaceClass;
uint8_t bInterfaceSubClass;
uint8_t bInterfaceProtocol;
uint8_t iInterface;
} VUSBDESCINTERFACE;
/** Pointer to a USB interface descriptor. */
typedef VUSBDESCINTERFACE *PVUSBDESCINTERFACE;
/** Pointer to a const USB interface descriptor. */
typedef const VUSBDESCINTERFACE *PCVUSBDESCINTERFACE;
/**
* USB endpoint descriptor (from spec)
*/
typedef struct VUSBDESCENDPOINT
{
uint8_t bLength;
uint8_t bDescriptorType;
uint8_t bEndpointAddress;
uint8_t bmAttributes;
uint16_t wMaxPacketSize;
uint8_t bInterval;
} VUSBDESCENDPOINT;
/** Pointer to a USB endpoint descriptor. */
typedef VUSBDESCENDPOINT *PVUSBDESCENDPOINT;
/** Pointer to a const USB endpoint descriptor. */
typedef const VUSBDESCENDPOINT *PCVUSBDESCENDPOINT;
/**
* USB SuperSpeed endpoint companion descriptor (from USB3 spec)
*/
typedef struct VUSBDESCSSEPCOMPANION
{
uint8_t bLength;
uint8_t bDescriptorType;
uint8_t bMaxBurst;
uint8_t bmAttributes;
uint16_t wBytesPerInterval;
} VUSBDESCSSEPCOMPANION;
/** Pointer to a USB endpoint companion descriptor. */
typedef VUSBDESCSSEPCOMPANION *PVUSBDESCSSEPCOMPANION;
/** Pointer to a const USB endpoint companion descriptor. */
typedef const VUSBDESCSSEPCOMPANION *PCVUSBDESCSSEPCOMPANION;
/**
* USB Binary Device Object Store, aka BOS (from USB3 spec)
*/
typedef struct VUSBDESCBOS
{
uint8_t bLength;
uint8_t bDescriptorType;
uint16_t wTotalLength;
uint8_t bNumDeviceCaps;
} VUSBDESCBOS;
/** Pointer to a USB BOS descriptor. */
typedef VUSBDESCBOS *PVUSBDESCBOS;
/** Pointer to a const USB BOS descriptor. */
typedef const VUSBDESCBOS *PCVUSBDESCBOS;
/**
* Generic USB Device Capability Descriptor within BOS (from USB3 spec)
*/
typedef struct VUSBDESCDEVICECAP
{
uint8_t bLength;
uint8_t bDescriptorType;
uint8_t bDevCapabilityType;
uint8_t aCapSpecific[1];
} VUSBDESCDEVICECAP;
/** Pointer to a USB device capability descriptor. */
typedef VUSBDESCDEVICECAP *PVUSBDESCDEVICECAP;
/** Pointer to a const USB device capability descriptor. */
typedef const VUSBDESCDEVICECAP *PCVUSBDESCDEVICECAP;
/**
* SuperSpeed USB Device Capability Descriptor within BOS
*/
typedef struct VUSBDESCSSDEVCAP
{
uint8_t bLength;
uint8_t bDescriptorType; /* DEVICE CAPABILITY */
uint8_t bDevCapabilityType; /* SUPERSPEED_USB */
uint8_t bmAttributes;
uint16_t wSpeedsSupported;
uint8_t bFunctionalitySupport;
uint8_t bU1DevExitLat;
uint16_t wU2DevExitLat;
} VUSBDESCSSDEVCAP;
/** Pointer to an SS USB device capability descriptor. */
typedef VUSBDESCSSDEVCAP *PVUSBDESCSSDEVCAP;
/** Pointer to a const SS USB device capability descriptor. */
typedef const VUSBDESCSSDEVCAP *PCVUSBDESCSSDEVCAP;
/**
* USB 2.0 Extension Descriptor within BOS
*/
typedef struct VUSBDESCUSB2EXT
{
uint8_t bLength;
uint8_t bDescriptorType; /* DEVICE CAPABILITY */
uint8_t bDevCapabilityType; /* USB 2.0 EXTENSION */
uint8_t bmAttributes;
} VUSBDESCUSB2EXT;
/** Pointer to a USB 2.0 extension capability descriptor. */
typedef VUSBDESCUSB2EXT *PVUSBDESCUSB2EXT;
/** Pointer to a const USB 2.0 extension capability descriptor. */
typedef const VUSBDESCUSB2EXT *PCVUSBDESCUSB2EXT;
#pragma pack() /* end of the byte packing. */
/**
* USB configuration descriptor, the parsed variant used by VUSB.
*/
typedef struct VUSBDESCCONFIGEX
{
/** The USB descriptor data.
* @remark The wTotalLength member is recalculated before the data is passed to the guest. */
VUSBDESCCONFIG Core;
/** Pointer to additional descriptor bytes following what's covered by VUSBDESCCONFIG. */
void *pvMore;
/** Pointer to an array of the interfaces referenced in the configuration.
* Core.bNumInterfaces in size. */
const struct VUSBINTERFACE *paIfs;
/** Pointer to the original descriptor data read from the device. */
const void *pvOriginal;
} VUSBDESCCONFIGEX;
/** Pointer to a parsed USB configuration descriptor. */
typedef VUSBDESCCONFIGEX *PVUSBDESCCONFIGEX;
/** Pointer to a const parsed USB configuration descriptor. */
typedef const VUSBDESCCONFIGEX *PCVUSBDESCCONFIGEX;
/**
* For tracking the alternate interface settings of a configuration.
*/
typedef struct VUSBINTERFACE
{
/** Pointer to an array of interfaces. */
const struct VUSBDESCINTERFACEEX *paSettings;
/** The number of entries in the array. */
uint32_t cSettings;
} VUSBINTERFACE;
/** Pointer to a VUSBINTERFACE. */
typedef VUSBINTERFACE *PVUSBINTERFACE;
/** Pointer to a const VUSBINTERFACE. */
typedef const VUSBINTERFACE *PCVUSBINTERFACE;
/**
* USB interface descriptor, the parsed variant used by VUSB.
*/
typedef struct VUSBDESCINTERFACEEX
{
/** The USB descriptor data. */
VUSBDESCINTERFACE Core;
/** Pointer to additional descriptor bytes following what's covered by VUSBDESCINTERFACE. */
const void *pvMore;
/** Pointer to additional class- or vendor-specific interface descriptors. */
const void *pvClass;
/** Size of class- or vendor-specific descriptors. */
uint16_t cbClass;
/** Pointer to an array of the endpoints referenced by the interface.
* Core.bNumEndpoints in size. */
const struct VUSBDESCENDPOINTEX *paEndpoints;
/** Interface association descriptor, which prepends a group of interfaces,
* starting with this interface. */
PCVUSBDESCIAD pIAD;
/** Size of interface association descriptor. */
uint16_t cbIAD;
} VUSBDESCINTERFACEEX;
/** Pointer to an prased USB interface descriptor. */
typedef VUSBDESCINTERFACEEX *PVUSBDESCINTERFACEEX;
/** Pointer to a const parsed USB interface descriptor. */
typedef const VUSBDESCINTERFACEEX *PCVUSBDESCINTERFACEEX;
/**
* USB endpoint descriptor, the parsed variant used by VUSB.
*/
typedef struct VUSBDESCENDPOINTEX
{
/** The USB descriptor data.
* @remark The wMaxPacketSize member is converted to native endian. */
VUSBDESCENDPOINT Core;
/** Pointer to additional descriptor bytes following what's covered by VUSBDESCENDPOINT. */
const void *pvMore;
/** Pointer to additional class- or vendor-specific endpoint descriptors. */
const void *pvClass;
/** Size of class- or vendor-specific descriptors. */
uint16_t cbClass;
/** Pointer to SuperSpeed endpoint companion descriptor (SS endpoints only). */
const void *pvSsepc;
/** Size of SuperSpeed endpoint companion descriptor.
* @remark Must be non-zero for SuperSpeed endpoints. */
uint16_t cbSsepc;
} VUSBDESCENDPOINTEX;
/** Pointer to a parsed USB endpoint descriptor. */
typedef VUSBDESCENDPOINTEX *PVUSBDESCENDPOINTEX;
/** Pointer to a const parsed USB endpoint descriptor. */
typedef const VUSBDESCENDPOINTEX *PCVUSBDESCENDPOINTEX;
/** @name USB Control message recipient codes (from spec)
* @{ */
#define VUSB_TO_DEVICE 0x0
#define VUSB_TO_INTERFACE 0x1
#define VUSB_TO_ENDPOINT 0x2
#define VUSB_TO_OTHER 0x3
#define VUSB_RECIP_MASK 0x1f
/** @} */
/** @name USB control pipe setup packet structure (from spec)
* @{ */
#define VUSB_REQ_SHIFT (5)
#define VUSB_REQ_STANDARD (0x0 << VUSB_REQ_SHIFT)
#define VUSB_REQ_CLASS (0x1 << VUSB_REQ_SHIFT)
#define VUSB_REQ_VENDOR (0x2 << VUSB_REQ_SHIFT)
#define VUSB_REQ_RESERVED (0x3 << VUSB_REQ_SHIFT)
#define VUSB_REQ_MASK (0x3 << VUSB_REQ_SHIFT)
/** @} */
#define VUSB_DIR_TO_DEVICE 0x00
#define VUSB_DIR_TO_HOST 0x80
#define VUSB_DIR_MASK 0x80
/**
* USB Setup request (from spec)
*/
typedef struct vusb_setup
{
uint8_t bmRequestType;
uint8_t bRequest;
uint16_t wValue;
uint16_t wIndex;
uint16_t wLength;
} VUSBSETUP;
/** Pointer to a setup request. */
typedef VUSBSETUP *PVUSBSETUP;
/** Pointer to a const setup request. */
typedef const VUSBSETUP *PCVUSBSETUP;
/** @name USB Standard device requests (from spec)
* @{ */
#define VUSB_REQ_GET_STATUS 0x00
#define VUSB_REQ_CLEAR_FEATURE 0x01
#define VUSB_REQ_SET_FEATURE 0x03
#define VUSB_REQ_SET_ADDRESS 0x05
#define VUSB_REQ_GET_DESCRIPTOR 0x06
#define VUSB_REQ_SET_DESCRIPTOR 0x07
#define VUSB_REQ_GET_CONFIGURATION 0x08
#define VUSB_REQ_SET_CONFIGURATION 0x09
#define VUSB_REQ_GET_INTERFACE 0x0a
#define VUSB_REQ_SET_INTERFACE 0x0b
#define VUSB_REQ_SYNCH_FRAME 0x0c
#define VUSB_REQ_MAX 0x0d
/** @} */
/** @} */ /* end of grp_vusb_std */
/** @name USB Standard version flags.
* @{ */
/** Indicates USB 1.1 support. */
#define VUSB_STDVER_11 RT_BIT(1)
/** Indicates USB 2.0 support. */
#define VUSB_STDVER_20 RT_BIT(2)
/** Indicates USB 3.0 support. */
#define VUSB_STDVER_30 RT_BIT(3)
/** @} */
/**
* USB port/device speeds.
*/
typedef enum VUSBSPEED
{
/** Undetermined/unknown speed. */
VUSB_SPEED_UNKNOWN = 0,
/** Low-speed (LS), 1.5 Mbit/s, USB 1.0. */
VUSB_SPEED_LOW,
/** Full-speed (FS), 12 Mbit/s, USB 1.1. */
VUSB_SPEED_FULL,
/** High-speed (HS), 480 Mbit/s, USB 2.0. */
VUSB_SPEED_HIGH,
/** Variable speed, wireless USB 2.5. */
VUSB_SPEED_VARIABLE,
/** SuperSpeed (SS), 5.0 Gbit/s, USB 3.0. */
VUSB_SPEED_SUPER,
/** SuperSpeed+ (SS+), 10.0 Gbit/s, USB 3.1. */
VUSB_SPEED_SUPERPLUS,
/** The usual 32-bit hack. */
VUSB_SPEED_32BIT_HACK = 0x7fffffff
} VUSBSPEED;
/**
* VUSB transfer direction.
*/
typedef enum VUSBDIRECTION
{
/** Setup */
VUSBDIRECTION_SETUP = 0,
#define VUSB_DIRECTION_SETUP VUSBDIRECTION_SETUP
/** In - Device to host. */
VUSBDIRECTION_IN = 1,
#define VUSB_DIRECTION_IN VUSBDIRECTION_IN
/** Out - Host to device. */
VUSBDIRECTION_OUT = 2,
#define VUSB_DIRECTION_OUT VUSBDIRECTION_OUT
/** Invalid direction */
VUSBDIRECTION_INVALID = 0x7f
} VUSBDIRECTION;
/** Pointer to a VBox USB device interface. */
typedef struct VUSBIDEVICE *PVUSBIDEVICE;
/** Pointer to a VUSB RootHub port interface. */
typedef struct VUSBIROOTHUBPORT *PVUSBIROOTHUBPORT;
/** Pointer to an USB request descriptor. */
typedef struct VUSBURB *PVUSBURB;
/**
* VBox USB port bitmap.
*
* Bit 0 == Port 0, ... , Bit 127 == Port 127.
*/
typedef struct VUSBPORTBITMAP
{
/** 128 bits */
char ach[16];
} VUSBPORTBITMAP;
/** Pointer to a VBox USB port bitmap. */
typedef VUSBPORTBITMAP *PVUSBPORTBITMAP;
#ifndef RDESKTOP
/**
* The VUSB RootHub port interface provided by the HCI (down).
* Pair with VUSBIROOTCONNECTOR
*/
typedef struct VUSBIROOTHUBPORT
{
/**
* Get the number of available ports in the hub.
*
* @returns The number of ports available.
* @param pInterface Pointer to this structure.
* @param pAvailable Bitmap indicating the available ports. Set bit == available port.
*/
DECLR3CALLBACKMEMBER(unsigned, pfnGetAvailablePorts,(PVUSBIROOTHUBPORT pInterface, PVUSBPORTBITMAP pAvailable));
/**
* Gets the supported USB versions.
*
* @returns The mask of supported USB versions.
* @param pInterface Pointer to this structure.
*/
DECLR3CALLBACKMEMBER(uint32_t, pfnGetUSBVersions,(PVUSBIROOTHUBPORT pInterface));
/**
* A device is being attached to a port in the roothub.
*
* @param pInterface Pointer to this structure.
* @param pDev Pointer to the device being attached.
* @param uPort The port number assigned to the device.
*/
DECLR3CALLBACKMEMBER(int, pfnAttach,(PVUSBIROOTHUBPORT pInterface, PVUSBIDEVICE pDev, unsigned uPort));
/**
* A device is being detached from a port in the roothub.
*
* @param pInterface Pointer to this structure.
* @param pDev Pointer to the device being detached.
* @param uPort The port number assigned to the device.
*/
DECLR3CALLBACKMEMBER(void, pfnDetach,(PVUSBIROOTHUBPORT pInterface, PVUSBIDEVICE pDev, unsigned uPort));
/**
* Reset the root hub.
*
* @returns VBox status code.
* @param pInterface Pointer to this structure.
* @param pResetOnLinux Whether or not to do real reset on linux.
*/
DECLR3CALLBACKMEMBER(int, pfnReset,(PVUSBIROOTHUBPORT pInterface, bool fResetOnLinux));
/**
* Transfer completion callback routine.
*
* VUSB will call this when a transfer have been completed
* in a one or another way.
*
* @param pInterface Pointer to this structure.
* @param pUrb Pointer to the URB in question.
*/
DECLR3CALLBACKMEMBER(void, pfnXferCompletion,(PVUSBIROOTHUBPORT pInterface, PVUSBURB urb));
/**
* Handle transfer errors.
*
* VUSB calls this when a transfer attempt failed. This function will respond
* indicating whether to retry or complete the URB with failure.
*
* @returns Retry indicator.
* @param pInterface Pointer to this structure.
* @param pUrb Pointer to the URB in question.
*/
DECLR3CALLBACKMEMBER(bool, pfnXferError,(PVUSBIROOTHUBPORT pInterface, PVUSBURB pUrb));
/** Alignment dummy. */
RTR3PTR Alignment;
} VUSBIROOTHUBPORT;
/** VUSBIROOTHUBPORT interface ID. */
#define VUSBIROOTHUBPORT_IID "e38e2978-7aa2-4860-94b6-9ef4a066d8a0"
/** Pointer to a VUSB RootHub connector interface. */
typedef struct VUSBIROOTHUBCONNECTOR *PVUSBIROOTHUBCONNECTOR;
/**
* The VUSB RootHub connector interface provided by the VBox USB RootHub driver
* (up).
* Pair with VUSBIROOTHUBPORT.
*/
typedef struct VUSBIROOTHUBCONNECTOR
{
/**
* Allocates a new URB for a transfer.
*
* Either submit using pfnSubmitUrb or free using VUSBUrbFree().
*
* @returns Pointer to a new URB.
* @returns NULL on failure - try again later.
* This will not fail if the device wasn't found. We'll fail it
* at submit time, since that makes the usage of this api simpler.
* @param pInterface Pointer to this struct.
* @param DstAddress The destination address of the URB.
* @param cbData The amount of data space required.
* @param cTds The amount of TD space.
*/
DECLR3CALLBACKMEMBER(PVUSBURB, pfnNewUrb,(PVUSBIROOTHUBCONNECTOR pInterface, uint8_t DstAddress, uint32_t cbData, uint32_t cTds));
/**
* Submits a URB for transfer.
* The transfer will do asynchronously if possible.
*
* @returns VBox status code.
* @param pInterface Pointer to this struct.
* @param pUrb Pointer to the URB returned by pfnNewUrb.
* The URB will be freed in case of failure.
* @param pLed Pointer to USB Status LED
*/
DECLR3CALLBACKMEMBER(int, pfnSubmitUrb,(PVUSBIROOTHUBCONNECTOR pInterface, PVUSBURB pUrb, struct PDMLED *pLed));
/**
* Call to service asynchronous URB completions in a polling fashion.
*
* Reaped URBs will be finished by calling the completion callback,
* thus there is no return code or input or anything from this function
* except for potential state changes elsewhere.
*
* @returns VINF_SUCCESS if no URBs are pending upon return.
* @returns VERR_TIMEOUT if one or more URBs are still in flight upon returning.
* @returns Other VBox status code.
*
* @param pInterface Pointer to this struct.
* @param cMillies Number of milliseconds to poll for completion.
*/
DECLR3CALLBACKMEMBER(void, pfnReapAsyncUrbs,(PVUSBIROOTHUBCONNECTOR pInterface, PVUSBIDEVICE pDevice, RTMSINTERVAL cMillies));
/**
* Cancels and completes - with CRC failure - all URBs queued on an endpoint.
* This is done in response to guest URB cancellation.
*
* @returns VBox status code.
* @param pInterface Pointer to this struct.
* @param pUrb Pointer to a previously submitted URB.
*/
DECLR3CALLBACKMEMBER(int, pfnCancelUrbsEp,(PVUSBIROOTHUBCONNECTOR pInterface, PVUSBURB pUrb));
/**
* Cancels and completes - with CRC failure - all in-flight async URBs.
* This is typically done before saving a state.
*
* @param pInterface Pointer to this struct.
*/
DECLR3CALLBACKMEMBER(void, pfnCancelAllUrbs,(PVUSBIROOTHUBCONNECTOR pInterface));
/**
* Cancels and completes - with CRC failure - all URBs queued on an endpoint.
* This is done in response to a guest endpoint/pipe abort.
*
* @returns VBox status code.
* @param pInterface Pointer to this struct.
* @param pDevice Pointer to a USB device.
* @param EndPt Endpoint number.
* @param enmDir Endpoint direction.
*/
DECLR3CALLBACKMEMBER(int, pfnAbortEp,(PVUSBIROOTHUBCONNECTOR pInterface, PVUSBIDEVICE pDevice, int EndPt, VUSBDIRECTION enmDir));
/**
* Attach the device to the root hub.
* The device must not be attached to any hub for this call to succeed.
*
* @returns VBox status code.
* @param pInterface Pointer to this struct.
* @param pDevice Pointer to the device (interface) attach.
*/
DECLR3CALLBACKMEMBER(int, pfnAttachDevice,(PVUSBIROOTHUBCONNECTOR pInterface, PVUSBIDEVICE pDevice));
/**
* Detach the device from the root hub.
* The device must already be attached for this call to succeed.
*
* @returns VBox status code.
* @param pInterface Pointer to this struct.
* @param pDevice Pointer to the device (interface) to detach.
*/
DECLR3CALLBACKMEMBER(int, pfnDetachDevice,(PVUSBIROOTHUBCONNECTOR pInterface, PVUSBIDEVICE pDevice));
/** Alignment dummy. */
RTR3PTR Alignment;
} VUSBIROOTHUBCONNECTOR;
/** VUSBIROOTHUBCONNECTOR interface ID. */
#define VUSBIROOTHUBCONNECTOR_IID "d9a90c59-e3ff-4dff-9754-844557c3f7a1"
#ifdef IN_RING3
/** @copydoc VUSBIROOTHUBCONNECTOR::pfnNewUrb */
DECLINLINE(PVUSBURB) VUSBIRhNewUrb(PVUSBIROOTHUBCONNECTOR pInterface, uint32_t DstAddress, uint32_t cbData, uint32_t cTds)
{
return pInterface->pfnNewUrb(pInterface, DstAddress, cbData, cTds);
}
/** @copydoc VUSBIROOTHUBCONNECTOR::pfnSubmitUrb */
DECLINLINE(int) VUSBIRhSubmitUrb(PVUSBIROOTHUBCONNECTOR pInterface, PVUSBURB pUrb, struct PDMLED *pLed)
{
return pInterface->pfnSubmitUrb(pInterface, pUrb, pLed);
}
/** @copydoc VUSBIROOTHUBCONNECTOR::pfnReapAsyncUrbs */
DECLINLINE(void) VUSBIRhReapAsyncUrbs(PVUSBIROOTHUBCONNECTOR pInterface, PVUSBIDEVICE pDevice, RTMSINTERVAL cMillies)
{
pInterface->pfnReapAsyncUrbs(pInterface, pDevice, cMillies);
}
/** @copydoc VUSBIROOTHUBCONNECTOR::pfnCancelAllUrbs */
DECLINLINE(void) VUSBIRhCancelAllUrbs(PVUSBIROOTHUBCONNECTOR pInterface)
{
pInterface->pfnCancelAllUrbs(pInterface);
}
/** @copydoc VUSBIROOTHUBCONNECTOR::pfnAttachDevice */
DECLINLINE(int) VUSBIRhAttachDevice(PVUSBIROOTHUBCONNECTOR pInterface, PVUSBIDEVICE pDevice)
{
return pInterface->pfnAttachDevice(pInterface, pDevice);
}
/** @copydoc VUSBIROOTHUBCONNECTOR::pfnDetachDevice */
DECLINLINE(int) VUSBIRhDetachDevice(PVUSBIROOTHUBCONNECTOR pInterface, PVUSBIDEVICE pDevice)
{
return pInterface->pfnDetachDevice(pInterface, pDevice);
}
#endif /* IN_RING3 */
/** Pointer to a Root Hub Configuration Interface. */
typedef struct VUSBIRHCONFIG *PVUSBIRHCONFIG;
/**
* Root Hub Configuration Interface (intended for MAIN).
* No interface pair.
*/
typedef struct VUSBIRHCONFIG
{
/**
* Creates a USB proxy device and attaches it to the root hub.
*
* @returns VBox status code.
* @param pInterface Pointer to the root hub configuration interface structure.
* @param pUuid Pointer to the UUID for the new device.
* @param fRemote Whether the device must use the VRDP backend.
* @param pszAddress OS specific device address.
* @param pvBackend An opaque pointer for the backend. Only used by
* the VRDP backend so far.
*/
DECLR3CALLBACKMEMBER(int, pfnCreateProxyDevice,(PVUSBIRHCONFIG pInterface, PCRTUUID pUuid, bool fRemote, const char *pszAddress, void *pvBackend));
/**
* Removes a USB proxy device from the root hub and destroys it.
*
* @returns VBox status code.
* @param pInterface Pointer to the root hub configuration interface structure.
* @param pUuid Pointer to the UUID for the device.
*/
DECLR3CALLBACKMEMBER(int, pfnDestroyProxyDevice,(PVUSBIRHCONFIG pInterface, PCRTUUID pUuid));
} VUSBIRHCONFIG;
/** VUSBIRHCONFIG interface ID. */
#define VUSBIRHCONFIG_IID "c354cd97-e85f-465e-bc12-b58798465f52"
#ifdef IN_RING3
/** @copydoc VUSBIRHCONFIG::pfnCreateProxyDevice */
DECLINLINE(int) VUSBIRhCreateProxyDevice(PVUSBIRHCONFIG pInterface, PCRTUUID pUuid, bool fRemote, const char *pszAddress, void *pvBackend)
{
return pInterface->pfnCreateProxyDevice(pInterface, pUuid, fRemote, pszAddress, pvBackend);
}
/** @copydoc VUSBIRHCONFIG::pfnDestroyProxyDevice */
DECLINLINE(int) VUSBIRhDestroyProxyDevice(PVUSBIRHCONFIG pInterface, PCRTUUID pUuid)
{
return pInterface->pfnDestroyProxyDevice(pInterface, pUuid);
}
#endif /* IN_RING3 */
#endif /* ! RDESKTOP */
/**
* VUSB device reset completion callback function.
* This is called by the reset thread when the reset has been completed.
*
* @param pDev Pointer to the virtual USB device core.
* @param rc The VBox status code of the reset operation.
* @param pvUser User specific argument.
*
* @thread The reset thread or EMT.
*/
typedef DECLCALLBACK(void) FNVUSBRESETDONE(PVUSBIDEVICE pDevice, int rc, void *pvUser);
/** Pointer to a device reset completion callback function (FNUSBRESETDONE). */
typedef FNVUSBRESETDONE *PFNVUSBRESETDONE;
/**
* The state of a VUSB Device.
*
* @remark The order of these states is vital.
*/
typedef enum VUSBDEVICESTATE
{
VUSB_DEVICE_STATE_INVALID = 0,
VUSB_DEVICE_STATE_DETACHED,
VUSB_DEVICE_STATE_ATTACHED,
VUSB_DEVICE_STATE_POWERED,
VUSB_DEVICE_STATE_DEFAULT,
VUSB_DEVICE_STATE_ADDRESS,
VUSB_DEVICE_STATE_CONFIGURED,
VUSB_DEVICE_STATE_SUSPENDED,
/** The device is being reset. Don't mess with it.
* Next states: VUSB_DEVICE_STATE_DEFAULT, VUSB_DEVICE_STATE_DESTROYED
*/
VUSB_DEVICE_STATE_RESET,
/** The device has been destroyed. */
VUSB_DEVICE_STATE_DESTROYED,
/** The usual 32-bit hack. */
VUSB_DEVICE_STATE_32BIT_HACK = 0x7fffffff
} VUSBDEVICESTATE;
#ifndef RDESKTOP
/**
* USB Device Interface (up).
* No interface pair.
*/
typedef struct VUSBIDEVICE
{
/**
* Resets the device.
*
* Since a device reset shall take at least 10ms from the guest point of view,
* it must be performed asynchronously. We create a thread which performs this
* operation and ensures it will take at least 10ms.
*
* At times - like init - a synchronous reset is required, this can be done
* by passing NULL for pfnDone.
*
* -- internal stuff, move it --
* While the device is being reset it is in the VUSB_DEVICE_STATE_RESET state.
* On completion it will be in the VUSB_DEVICE_STATE_DEFAULT state if successful,
* or in the VUSB_DEVICE_STATE_DETACHED state if the rest failed.
* -- internal stuff, move it --
*
* @returns VBox status code.
* @param pInterface Pointer to this structure.
* @param fResetOnLinux Set if we can permit a real reset and a potential logical
* device reconnect on linux hosts.
* @param pfnDone Pointer to the completion routine. If NULL a synchronous
* reset is preformed not respecting the 10ms.
* @param pvUser User argument to the completion routine.
* @param pVM Pointer to the VM handle if callback in EMT is required. (optional)
*/
DECLR3CALLBACKMEMBER(int, pfnReset,(PVUSBIDEVICE pInterface, bool fResetOnLinux,
PFNVUSBRESETDONE pfnDone, void *pvUser, PVM pVM));
/**
* Powers on the device.
*
* @returns VBox status code.
* @param pInterface Pointer to the device interface structure.
*/
DECLR3CALLBACKMEMBER(int, pfnPowerOn,(PVUSBIDEVICE pInterface));
/**
* Powers off the device.
*
* @returns VBox status code.
* @param pInterface Pointer to the device interface structure.
*/
DECLR3CALLBACKMEMBER(int, pfnPowerOff,(PVUSBIDEVICE pInterface));
/**
* Get the state of the device.
*
* @returns Device state.
* @param pInterface Pointer to the device interface structure.
*/
DECLR3CALLBACKMEMBER(VUSBDEVICESTATE, pfnGetState,(PVUSBIDEVICE pInterface));
/**
* Returns whether the device is completely emulated.
*
* @returns true if the device is fully emulated and doesn't pass through
* a host device, false otherwise.
* @param pInterface Pointer to the device interface structure.
*/
DECLR3CALLBACKMEMBER(bool, pfnIsEmulated,(PVUSBIDEVICE pInterface));
/**
* Get the speed the device is operating at.
*
* @returns Device state.
* @param pInterface Pointer to the device interface structure.
*/
DECLR3CALLBACKMEMBER(VUSBSPEED, pfnGetSpeed,(PVUSBIDEVICE pInterface));
} VUSBIDEVICE;
/** VUSBIDEVICE interface ID. */
#define VUSBIDEVICE_IID "f3facb2b-edd3-4b5b-b07e-2cc4d52a471e"
#ifdef IN_RING3
/**
* Resets the device.
*
* Since a device reset shall take at least 10ms from the guest point of view,
* it must be performed asynchronously. We create a thread which performs this
* operation and ensures it will take at least 10ms.
*
* At times - like init - a synchronous reset is required, this can be done
* by passing NULL for pfnDone.
*
* -- internal stuff, move it --
* While the device is being reset it is in the VUSB_DEVICE_STATE_RESET state.
* On completion it will be in the VUSB_DEVICE_STATE_DEFAULT state if successful,
* or in the VUSB_DEVICE_STATE_DETACHED state if the rest failed.
* -- internal stuff, move it --
*
* @returns VBox status code.
* @param pInterface Pointer to the device interface structure.
* @param fResetOnLinux Set if we can permit a real reset and a potential logical
* device reconnect on linux hosts.
* @param pfnDone Pointer to the completion routine. If NULL a synchronous
* reset is preformed not respecting the 10ms.
* @param pvUser User argument to the completion routine.
* @param pVM Pointer to the VM handle if callback in EMT is required. (optional)
*/
DECLINLINE(int) VUSBIDevReset(PVUSBIDEVICE pInterface, bool fResetOnLinux, PFNVUSBRESETDONE pfnDone, void *pvUser, PVM pVM)
{
return pInterface->pfnReset(pInterface, fResetOnLinux, pfnDone, pvUser, pVM);
}
/**
* Powers on the device.
*
* @returns VBox status code.
* @param pInterface Pointer to the device interface structure.
*/
DECLINLINE(int) VUSBIDevPowerOn(PVUSBIDEVICE pInterface)
{
return pInterface->pfnPowerOn(pInterface);
}
/**
* Powers off the device.
*
* @returns VBox status code.
* @param pInterface Pointer to the device interface structure.
*/
DECLINLINE(int) VUSBIDevPowerOff(PVUSBIDEVICE pInterface)
{
return pInterface->pfnPowerOff(pInterface);
}
/**
* Get the state of the device.
*
* @returns Device state.
* @param pInterface Pointer to the device interface structure.
*/
DECLINLINE(VUSBDEVICESTATE) VUSBIDevGetState(PVUSBIDEVICE pInterface)
{
return pInterface->pfnGetState(pInterface);
}
/**
* Returns whether the device is completely emulated.
*
* @returns true if the device is fully emulated and doesn't pass through
* a host device, false otherwise.
* @param pInterface Pointer to the device interface structure.
*/
DECLINLINE(bool) VUSBIDevIsEmulated(PVUSBIDEVICE pInterface)
{
return pInterface->pfnIsEmulated(pInterface);
}
#endif /* IN_RING3 */
#endif /* ! RDESKTOP */
/** @name URB
* @{ */
/**
* VUSB Transfer status codes.
*/
typedef enum VUSBSTATUS
{
/** Transer was ok. */
VUSBSTATUS_OK = 0,
/** Transfer stalled, endpoint halted. */
VUSBSTATUS_STALL,
/** Device not responding. */
VUSBSTATUS_DNR,
/** CRC error. */
VUSBSTATUS_CRC,
/** Data overrun error. */
VUSBSTATUS_DATA_UNDERRUN,
/** Data overrun error. */
VUSBSTATUS_DATA_OVERRUN,
/** The isochronous buffer hasn't been touched. */
VUSBSTATUS_NOT_ACCESSED,
/** Canceled/undone URB (VUSB internal). */
VUSBSTATUS_UNDO,
/** Invalid status. */
VUSBSTATUS_INVALID = 0x7f
} VUSBSTATUS;
/**
* VUSB Transfer types.
*/
typedef enum VUSBXFERTYPE
{
/** Control message. Used to represent a single control transfer. */
VUSBXFERTYPE_CTRL = 0,
/* Isochronous transfer. */
VUSBXFERTYPE_ISOC,
/** Bulk transfer. */
VUSBXFERTYPE_BULK,
/** Interrupt transfer. */
VUSBXFERTYPE_INTR,
/** Complete control message. Used to represent an entire control message. */
VUSBXFERTYPE_MSG,
/** Invalid transfer type. */
VUSBXFERTYPE_INVALID = 0x7f
} VUSBXFERTYPE;
/**
* The URB states
*/
typedef enum VUSBURBSTATE
{
/** The usual invalid state. */
VUSBURBSTATE_INVALID = 0,
/** The URB is free, i.e. not in use.
* Next state: ALLOCATED */
VUSBURBSTATE_FREE,
/** The URB is allocated, i.e. being prepared for submission.
* Next state: FREE, IN_FLIGHT */
VUSBURBSTATE_ALLOCATED,
/** The URB is in flight.
* Next state: REAPED, CANCELLED */
VUSBURBSTATE_IN_FLIGHT,
/** The URB has been reaped and is being completed.
* Next state: FREE */
VUSBURBSTATE_REAPED,
/** The URB has been cancelled and is awaiting reaping and immediate freeing.
* Next state: FREE */
VUSBURBSTATE_CANCELLED,
/** The end of the valid states (exclusive). */
VUSBURBSTATE_END,
/** The usual 32-bit blow up. */
VUSBURBSTATE_32BIT_HACK = 0x7fffffff
} VUSBURBSTATE;
/**
* Information about a isochronous packet.
*/
typedef struct VUSBURBISOCPKT
{
/** The size of the packet.
* IN: The packet size. I.e. the number of bytes to the next packet or end of buffer.
* OUT: The actual size transferred. */
uint16_t cb;
/** The offset of the packet. (Relative to VUSBURB::abData[0].)
* OUT: This can be changed by the USB device if it does some kind of buffer squeezing. */
uint16_t off;
/** The status of the transfer.
* IN: VUSBSTATUS_INVALID
* OUT: VUSBSTATUS_INVALID if nothing was done, otherwise the correct status. */
VUSBSTATUS enmStatus;
} VUSBURBISOCPKT;
/** Pointer to a isochronous packet. */
typedef VUSBURBISOCPKT *PVUSBURBISOCPTK;
/** Pointer to a const isochronous packet. */
typedef const VUSBURBISOCPKT *PCVUSBURBISOCPKT;
/**
* Asynchronous USB request descriptor
*/
typedef struct VUSBURB
{
/** URB magic value. */
uint32_t u32Magic;
/** The USR state. */
VUSBURBSTATE enmState;
/** URB description, can be null. intended for logging. */
char *pszDesc;
#ifdef RDESKTOP
/** The next URB in rdesktop-vrdp's linked list */
PVUSBURB pNext;
/** The previous URB in rdesktop-vrdp's linked list */
PVUSBURB pPrev;
/** The vrdp handle for the URB */
uint32_t handle;
/** Pointer used to find the usb proxy device */
struct VUSBDEV *pDev;
#endif
/** The VUSB data. */
struct VUSBURBVUSB
{
/** URB chain pointer. */
PVUSBURB pNext;
/** URB chain pointer. */
PVUSBURB *ppPrev;
/** Pointer to the original for control messages. */
PVUSBURB pCtrlUrb;
/** Pointer to the VUSB device.
* This may be NULL if the destination address is invalid. */
struct VUSBDEV *pDev;
/** Sepcific to the pfnFree function. */
void *pvFreeCtx;
/**
* Callback which will free the URB once it's reaped and completed.
* @param pUrb The URB.
*/
DECLCALLBACKMEMBER(void, pfnFree)(PVUSBURB pUrb);
/** Submit timestamp. (logging only) */
uint64_t u64SubmitTS;
/** The allocated data length. */
uint32_t cbDataAllocated;
/** The allocated TD length. */
uint32_t cTdsAllocated;
} VUsb;
/** The host controller data. */
struct VUSBURBHCI
{
/** The endpoint descriptor address. */
RTGCPHYS32 EdAddr;
/** Number of Tds in the array. */
uint32_t cTds;
/** Pointer to an array of TD info items.*/
struct VUSBURBHCITD
{
/** Type of TD (private) */
uint32_t TdType;
/** The address of the */
RTGCPHYS32 TdAddr;
/** A copy of the TD. */
uint32_t TdCopy[16];
} *paTds;
/** URB chain pointer. */
PVUSBURB pNext;
/** When this URB was created.
* (Used for isochronous frames and for logging.) */
uint32_t u32FrameNo;
/** Flag indicating that the TDs have been unlinked. */
bool fUnlinked;
RTQUEUEATOMICITEM QueueItem;
} Hci;
/** The device data. */
struct VUSBURBDEV
{
/** Pointer to private device specific data. */
void *pvPrivate;
/** Used by the device when linking the URB in some list of its own. */
PVUSBURB pNext;
} Dev;
#ifndef RDESKTOP
/** The USB device instance this belongs to.
* This is NULL if the device address is invalid, in which case this belongs to the hub. */
PPDMUSBINS pUsbIns;
#endif
/** The device address.
* This is set at allocation time. */
uint8_t DstAddress;
/** The endpoint.
* IN: Must be set before submitting the URB.
* @remark This does not have the high bit (direction) set! */
uint8_t EndPt;
/** The transfer type.
* IN: Must be set before submitting the URB. */
VUSBXFERTYPE enmType;
/** The transfer direction.
* IN: Must be set before submitting the URB. */
VUSBDIRECTION enmDir;
/** Indicates whether it is OK to receive/send less data than requested.
* IN: Must be initialized before submitting the URB. */
bool fShortNotOk;
/** The transfer status.
* OUT: This is set when reaping the URB. */
VUSBSTATUS enmStatus;
/** The number of isochronous packets describe in aIsocPkts.
* This is ignored when enmType isn't VUSBXFERTYPE_ISOC. */
uint32_t cIsocPkts;
/** The iso packets within abData.
* This is ignored when enmType isn't VUSBXFERTYPE_ISOC. */
VUSBURBISOCPKT aIsocPkts[8];
/** The message length.
* IN: The amount of data to send / receive - set at allocation time.
* OUT: The amount of data sent / received. */
uint32_t cbData;
/** The message data.
* IN: On host to device transfers, the data to send.
* OUT: On device to host transfers, the data to received.
* This array has actually a size of VUsb.cbDataAllocated, not 8KB! */
uint8_t abData[8*_1K];
} VUSBURB;
/** The magic value of a valid VUSBURB. (Murakami Haruki) */
#define VUSBURB_MAGIC UINT32_C(0x19490112)
/** @} */
/** @} */
RT_C_DECLS_END
#endif