#
# CDDL HEADER START
#
# The contents of this file are subject to the terms of the
# Common Development and Distribution License (the "License").
# You may not use this file except in compliance with the License.
#
# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
# See the License for the specific language governing permissions
# and limitations under the License.
#
# When distributing Covered Code, include this CDDL HEADER in each
# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
# If applicable, add the following below this CDDL HEADER, with the
# fields enclosed by brackets "[]" replaced with your own identifying
# information: Portions Copyright [yyyy] [name of copyright owner]
#
# CDDL HEADER END
#
#
# Copyright (c) 2010, 2015, Oracle and/or its affiliates. All rights reserved.
#
$(BUILD_DIR)/%-2.6/.built: PYTHON_VERSION=2.6
$(BUILD_DIR)/%-2.7/.built: PYTHON_VERSION=2.7
$(BUILD_DIR)/%-3.4/.built: PYTHON_VERSION=3.4
$(BUILD_DIR)/$(MACH32)-%/.built: BITS=32
$(BUILD_DIR)/$(MACH64)-%/.built: BITS=64
$(BUILD_DIR)/%-2.6/.installed: PYTHON_VERSION=2.6
$(BUILD_DIR)/%-2.7/.installed: PYTHON_VERSION=2.7
$(BUILD_DIR)/%-3.4/.installed: PYTHON_VERSION=3.4
$(BUILD_DIR)/$(MACH32)-%/.installed: BITS=32
$(BUILD_DIR)/$(MACH64)-%/.installed: BITS=64
$(BUILD_DIR)/%-2.6/.tested: PYTHON_VERSION=2.6
$(BUILD_DIR)/%-2.7/.tested: PYTHON_VERSION=2.7
$(BUILD_DIR)/%-3.4/.tested: PYTHON_VERSION=3.4
$(BUILD_DIR)/$(MACH32)-%/.tested: BITS=32
$(BUILD_DIR)/$(MACH64)-%/.tested: BITS=64
BUILD_32 = $(PYTHON2_VERSIONS:%=$(BUILD_DIR)/$(MACH32)-%/.built)
BUILD_64 = $(PYTHON_VERSIONS:%=$(BUILD_DIR)/$(MACH64)-%/.built)
BUILD_NO_ARCH = $(PYTHON_VERSIONS:%=$(BUILD_DIR)/$(MACH)-%/.built)
ifeq ($(PYTHON_VERSION),3.4)
BUILD_32_and_64 = $(BUILD_64)
endif
INSTALL_32 = $(PYTHON2_VERSIONS:%=$(BUILD_DIR)/$(MACH32)-%/.installed)
INSTALL_64 = $(PYTHON_VERSIONS:%=$(BUILD_DIR)/$(MACH64)-%/.installed)
INSTALL_NO_ARCH = $(PYTHON_VERSIONS:%=$(BUILD_DIR)/$(MACH)-%/.installed)
ifeq ($(PYTHON_VERSION),3.4)
INSTALL_32_and_64 = $(INSTALL_64)
endif
TEST_32 = $(PYTHON2_VERSIONS:%=$(BUILD_DIR)/$(MACH32)-%/.tested)
TEST_64 = $(PYTHON_VERSIONS:%=$(BUILD_DIR)/$(MACH64)-%/.tested)
TEST_NO_ARCH = $(PYTHON_VERSIONS:%=$(BUILD_DIR)/$(MACH)-%/.tested)
ifeq ($(PYTHON_VERSION),3.4)
TEST_32_and_64 = $(TEST_64)
endif
PYTHON_ENV = CC="$(CC)"
PYTHON_ENV += CFLAGS="$(CFLAGS)"
PYTHON_ENV += PATH="$(PATH):$(SPRO_VROOT)/bin"
COMPONENT_BUILD_ENV += $(PYTHON_ENV)
COMPONENT_INSTALL_ENV += $(PYTHON_ENV)
COMPONENT_TEST_ENV += $(PYTHON_ENV)
# If we are building Python 2.7 or 3.4 support, build them and install them
# before Python 2.6, so 2.6 is installed last and is the canonical version.
# When we change the default, the new default should go last.
ifneq ($(findstring 2.7,$(PYTHON_VERSIONS)),)
$(BUILD_DIR)/%-2.6/.built: $(BUILD_DIR)/%-2.7/.built
$(BUILD_DIR)/%-2.6/.installed: $(BUILD_DIR)/%-2.7/.installed
endif
ifneq ($(findstring 3.4,$(PYTHON_VERSIONS)),)
$(BUILD_DIR)/%-2.6/.built: $(BUILD_DIR)/%-3.4/.built
$(BUILD_DIR)/%-2.6/.installed: $(BUILD_DIR)/%-3.4/.installed
endif
# Create a distutils config file specific to the combination of build
# characteristics (bittedness x Python version), and put it in its own
# directory. We can set $HOME to point distutils at it later, allowing
# the install phase to find the temporary build directories.
CFG=.pydistutils.cfg
$(BUILD_DIR)/config-%/$(CFG):
$(MKDIR) $(@D)
echo "[build]\nbuild_base = $(BUILD_DIR)/$*" > $@
# build the configured source
$(BUILD_DIR)/%/.built: $(SOURCE_DIR)/.prep $(BUILD_DIR)/config-%/$(CFG)
$(RM) -r $(@D) ; $(MKDIR) $(@D)
$(COMPONENT_PRE_BUILD_ACTION)
(cd $(SOURCE_DIR) ; $(ENV) HOME=$(BUILD_DIR)/config-$* $(COMPONENT_BUILD_ENV) \
$(PYTHON.$(BITS)) ./setup.py build)
$(COMPONENT_POST_BUILD_ACTION)
ifeq ($(strip $(PARFAIT_BUILD)),yes)
-$(PARFAIT) $(@D)
endif
$(TOUCH) $@
COMPONENT_INSTALL_ARGS += --root $(PROTO_DIR)
COMPONENT_INSTALL_ARGS += --install-lib=$(PYTHON_LIB)
COMPONENT_INSTALL_ARGS += --install-purelib=$(PYTHON_LIB)
COMPONENT_INSTALL_ARGS += --install-platlib=$(PYTHON_LIB)
COMPONENT_INSTALL_ARGS += --install-data=$(PYTHON_DATA)
COMPONENT_INSTALL_ARGS += --force
# install the built source into a prototype area
$(BUILD_DIR)/%/.installed: $(BUILD_DIR)/%/.built $(BUILD_DIR)/config-%/$(CFG)
$(COMPONENT_PRE_INSTALL_ACTION)
(cd $(SOURCE_DIR) ; $(ENV) HOME=$(BUILD_DIR)/config-$* $(COMPONENT_INSTALL_ENV) \
$(PYTHON.$(BITS)) ./setup.py install $(COMPONENT_INSTALL_ARGS))
$(COMPONENT_POST_INSTALL_ACTION)
$(TOUCH) $@
COMPONENT_TEST_DEP = $(BUILD_DIR)/%/.installed
COMPONENT_TEST_DIR = $(COMPONENT_SRC)/test
COMPONENT_TEST_ENV_CMD = $(ENV) -
COMPONENT_TEST_ENV += PYTHONPATH=$(PROTO_DIR)$(PYTHON_VENDOR_PACKAGES)
COMPONENT_TEST_CMD = $(PYTHON)
COMPONENT_TEST_ARGS += ./runtests.py
# test the built source
$(BUILD_DIR)/%/.tested: $(COMPONENT_TEST_DEP)
$(COMPONENT_PRE_TEST_ACTION)
(cd $(COMPONENT_TEST_DIR); $(COMPONENT_TEST_ENV_CMD) \
$(COMPONENT_TEST_ENV) \
$(COMPONENT_TEST_CMD) $(COMPONENT_TEST_ARGS) )
$(COMPONENT_POST_TEST_ACTION)
$(TOUCH) $@
ifeq ($(strip $(PARFAIT_BUILD)),yes)
parfait: build
else
parfait:
$(MAKE) PARFAIT_BUILD=yes parfait
endif
clean::
$(RM) -r $(SOURCE_DIR) $(BUILD_DIR)
# Make it easy to construct a URL for a pypi source download. This
# construct supports an optional call to a number from
# NUM_EXTRA_ARCHIVES for multiple archive downloads.
PYPI_BASE = http://pypi.python.org/packages/source
pypi_url_multi = $(shell echo $(COMPONENT_NAME_$(1)) | cut -c1)/$(COMPONENT_NAME_$(1))/$(COMPONENT_ARCHIVE_$(1))
pypi_url_single = $(shell echo $(COMPONENT_NAME) | cut -c1)/$(COMPONENT_NAME)/$(COMPONENT_ARCHIVE)
pypi_url = $(PYPI_BASE)/$(if $(COMPONENT_NAME_$(1)),$(pypi_url_multi),$(pypi_url_single))
ifneq ($(findstring 2.6, $(PYTHON_VERSIONS)),)
REQUIRED_PACKAGES += runtime/python-26
endif
ifneq ($(findstring 2.7, $(PYTHON_VERSIONS)),)
REQUIRED_PACKAGES += runtime/python-27
endif
ifneq ($(findstring 3.4, $(PYTHON_VERSIONS)),)
REQUIRED_PACKAGES += runtime/python-34
endif
REQUIRED_PACKAGES += library/python/setuptools