crypto/ecc/ecp_521.c

/* BEGIN CSTYLED */
/*
 * ***** BEGIN LICENSE BLOCK *****
 * Version: MPL 1.1/GPL 2.0/LGPL 2.1
 *
 * The contents of this file are subject to the Mozilla Public License Version
 * 1.1 (the "License"); you may not use this file except in compliance with
 * the License. You may obtain a copy of the License at
 * http://www.mozilla.org/MPL/
 *
 * Software distributed under the License is distributed on an "AS IS" basis,
 * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
 * for the specific language governing rights and limitations under the
 * License.
 *
 * The Original Code is the elliptic curve math library for prime field curves.
 *
 * The Initial Developer of the Original Code is
 * Sun Microsystems, Inc.
 * Portions created by the Initial Developer are Copyright (C) 2003
 * the Initial Developer. All Rights Reserved.
 *
 * Contributor(s):
 *   Douglas Stebila <douglas@stebila.ca>
 *
 * Alternatively, the contents of this file may be used under the terms of
 * either the GNU General Public License Version 2 or later (the "GPL"), or
 * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
 * in which case the provisions of the GPL or the LGPL are applicable instead
 * of those above. If you wish to allow use of your version of this file only
 * under the terms of either the GPL or the LGPL, and not to allow others to
 * use your version of this file under the terms of the MPL, indicate your
 * decision by deleting the provisions above and replace them with the notice
 * and other provisions required by the GPL or the LGPL. If you do not delete
 * the provisions above, a recipient may use your version of this file under
 * the terms of any one of the MPL, the GPL or the LGPL.
 *
 * ***** END LICENSE BLOCK ***** */
/*
 * Copyright (c) 2007, 2010, Oracle and/or its affiliates. All rights reserved.
 *
 * Sun elects to use this software under the MPL license.
 */

#include "ecp.h"
#include "mpi.h"
#include "mplogic.h"
#include "mpi-priv.h"
#ifndef _KERNEL
#include <stdlib.h>
#endif

#define ECP521_DIGITS ECL_CURVE_DIGITS(521)

/* Fast modular reduction for p521 = 2^521 - 1.  a can be r. Uses
 * algorithm 2.31 from Hankerson, Menezes, Vanstone. Guide to
 * Elliptic Curve Cryptography. */
mp_err
ec_GFp_nistp521_mod(const mp_int *a, mp_int *r, const GFMethod *meth)
{
    mp_err res = MP_OKAY;
    int a_bits = mpl_significant_bits(a);
    int i;

    /* m1, m2 are statically-allocated mp_int of exactly the size we need */
    mp_int m1;

    mp_digit s1[ECP521_DIGITS] = { 0 };

    MP_SIGN(&m1) = MP_ZPOS;
    MP_ALLOC(&m1) = ECP521_DIGITS;
    MP_USED(&m1) = ECP521_DIGITS;
    MP_DIGITS(&m1) = s1;
    MP_FLAG(&m1) = MP_FLAG(a);

    if (a_bits < 521) {
        if (a==r) return MP_OKAY;
        return mp_copy(a, r);
    }
    /* for polynomials larger than twice the field size or polynomials
     * not using all words, use regular reduction */
    if (a_bits > (521*2)) {
        MP_CHECKOK(mp_mod(a, &meth->irr, r));
    } else {
#define FIRST_DIGIT (ECP521_DIGITS-1)
        for (i = FIRST_DIGIT; i < MP_USED(a)-1; i++) {
            s1[i-FIRST_DIGIT] = (MP_DIGIT(a, i) >> 9)
                | (MP_DIGIT(a, 1+i) << (MP_DIGIT_BIT-9));
        }
        s1[i-FIRST_DIGIT] = MP_DIGIT(a, i) >> 9;

        if ( a != r ) {
            MP_CHECKOK(s_mp_pad(r,ECP521_DIGITS));
            for (i = 0; i < ECP521_DIGITS; i++) {
                MP_DIGIT(r,i) = MP_DIGIT(a, i);
            }
        }
        MP_USED(r) = ECP521_DIGITS;
        MP_DIGIT(r,FIRST_DIGIT) &=  0x1FF;

        MP_CHECKOK(s_mp_add(r, &m1));
        if (MP_DIGIT(r, FIRST_DIGIT) & 0x200) {
            MP_CHECKOK(s_mp_add_d(r,1));
            MP_DIGIT(r,FIRST_DIGIT) &=  0x1FF;
        }
        s_mp_clamp(r);
    }

  CLEANUP:
    return res;
}

/* Compute the square of polynomial a, reduce modulo p521. Store the
 * result in r.  r could be a.  Uses optimized modular reduction for p521.
 */
mp_err
ec_GFp_nistp521_sqr(const mp_int *a, mp_int *r, const GFMethod *meth)
{
    mp_err res = MP_OKAY;

    MP_CHECKOK(mp_sqr(a, r));
    MP_CHECKOK(ec_GFp_nistp521_mod(r, r, meth));
  CLEANUP:
    return res;
}

/* Compute the product of two polynomials a and b, reduce modulo p521.
 * Store the result in r.  r could be a or b; a could be b.  Uses
 * optimized modular reduction for p521. */
mp_err
ec_GFp_nistp521_mul(const mp_int *a, const mp_int *b, mp_int *r,
                    const GFMethod *meth)
{
    mp_err res = MP_OKAY;

    MP_CHECKOK(mp_mul(a, b, r));
    MP_CHECKOK(ec_GFp_nistp521_mod(r, r, meth));
  CLEANUP:
    return res;
}

/* Divides two field elements. If a is NULL, then returns the inverse of
 * b. */
mp_err
ec_GFp_nistp521_div(const mp_int *a, const mp_int *b, mp_int *r,
           const GFMethod *meth)
{
    mp_err res = MP_OKAY;
    mp_int t;

    /* If a is NULL, then return the inverse of b, otherwise return a/b. */
    if (a == NULL) {
        return mp_invmod(b, &meth->irr, r);
    } else {
        /* MPI doesn't support divmod, so we implement it using invmod and
         * mulmod. */
        MP_CHECKOK(mp_init(&t, FLAG(b)));
        MP_CHECKOK(mp_invmod(b, &meth->irr, &t));
        MP_CHECKOK(mp_mul(a, &t, r));
        MP_CHECKOK(ec_GFp_nistp521_mod(r, r, meth));
      CLEANUP:
        mp_clear(&t);
        return res;
    }
}

/* Wire in fast field arithmetic and precomputation of base point for
 * named curves. */
mp_err
ec_group_set_gfp521(ECGroup *group, ECCurveName name)
{
    if (name == ECCurve_NIST_P521) {
        group->meth->field_mod = &ec_GFp_nistp521_mod;
        group->meth->field_mul = &ec_GFp_nistp521_mul;
        group->meth->field_sqr = &ec_GFp_nistp521_sqr;
        group->meth->field_div = &ec_GFp_nistp521_div;
    }
    return MP_OKAY;
}
/* END CSTYLED */