use strict;
no strict 'refs'; # because users pass me bareword filehandles
require Exporter;
use Carp;
$VERSION = 1.0106;
=head1 NAME
IPC::Open3, open3 - open a process for reading, writing, and error handling
=head1 SYNOPSIS
$pid = open3(\*WTRFH, \*RDRFH, \*ERRFH,
'some cmd and args', 'optarg', ...);
my($wtr, $rdr, $err);
$pid = open3($wtr, $rdr, $err,
'some cmd and args', 'optarg', ...);
=head1 DESCRIPTION
Extremely similar to open2(), open3() spawns the given $cmd and
connects RDRFH for reading, WTRFH for writing, and ERRFH for errors. If
ERRFH is false, or the same file descriptor as RDRFH, then STDOUT and
STDERR of the child are on the same filehandle. The WTRFH will have
autoflush turned on.
If WTRFH begins with C<< <& >>, then WTRFH will be closed in the parent, and
the child will read from it directly. If RDRFH or ERRFH begins with
C<< >& >>, then the child will send output directly to that filehandle.
In both cases, there will be a dup(2) instead of a pipe(2) made.
If either reader or writer is the null string, this will be replaced
by an autogenerated filehandle. If so, you must pass a valid lvalue
in the parameter slot so it can be overwritten in the caller, or
an exception will be raised.
The filehandles may also be integers, in which case they are understood
as file descriptors.
open3() returns the process ID of the child process. It doesn't return on
failure: it just raises an exception matching C</^open3:/>. However,
C<exec> failures in the child are not detected. You'll have to
trap SIGPIPE yourself.
Note if you specify C<-> as the command, in an analogous fashion to
C<open(FOO, "-|")> the child process will just be the forked Perl
process rather than an external command. This feature isn't yet
supported on Win32 platforms.
open3() does not wait for and reap the child process after it exits.
Except for short programs where it's acceptable to let the operating system
take care of this, you need to do this yourself. This is normally as
simple as calling C<waitpid $pid, 0> when you're done with the process.
Failing to do this can result in an accumulation of defunct or "zombie"
If you try to read from the child's stdout writer and their stderr
writer, you'll have problems with blocking, which means you'll want
to use select() or the IO::Select, which means you'd best use
sysread() instead of readline() for normal stuff.
This is very dangerous, as you may block forever. It assumes it's
going to talk to something like B<bc>, both writing to it and reading
from it. This is presumably safe because you "know" that commands
like B<bc> will read a line at a time and output a line at a time.
Programs like B<sort> that read their entire input stream first,
however, are quite apt to cause deadlock.
The big problem with this approach is that if you don't have control
over source code being run in the child process, you can't control
what it does with pipe buffering. Thus you can't just open a pipe to
C<cat -v> and continually read and write a line from it.
=head1 WARNING
The order of arguments differs from that of open2().
=cut
# &open3: Marc Horowitz <marc@mit.edu>
# derived mostly from &open2 by tom christiansen, <tchrist@convex.com>
# fixed for 5.001 by Ulrich Kunitz <kunitz@mai-koeln.com>
# ported to Win32 by Ron Schmidt, Merrill Lynch almost ended my career
# fixed for autovivving FHs, tchrist again
# allow fd numbers to be used, by Frank Tobin
# allow '-' as command (c.f. open "-|"), by Adam Spiers <perl@adamspiers.org>
#
# $Id: open3.pl,v 1.1 1993/11/23 06:26:15 marc Exp $
#
# usage: $pid = open3('wtr', 'rdr', 'err' 'some cmd and args', 'optarg', ...);
#
# spawn the given $cmd and connect rdr for
# reading, wtr for writing, and err for errors.
# if err is '', or the same as rdr, then stdout and
# stderr of the child are on the same fh. returns pid
# of child (or dies on failure).
# if wtr begins with '<&', then wtr will be closed in the parent, and
# the child will read from it directly. if rdr or err begins with
# '>&', then the child will send output directly to that fd. In both
# cases, there will be a dup() instead of a pipe() made.
# WARNING: this is dangerous, as you may block forever
# unless you are very careful.
#
# $wtr is left unbuffered.
#
# abort program if
# rdr or wtr are null
# a system call fails
# Fatal.pm needs to be fixed WRT prototypes.
sub xfork {
my $pid = fork;
defined $pid or croak "$Me: fork failed: $!";
return $pid;
}
sub xpipe {
pipe $_[0], $_[1] or croak "$Me: pipe($_[0], $_[1]) failed: $!";
}
# I tried using a * prototype character for the filehandle but it still
# disallows a bearword while compiling under strict subs.
sub xopen {
open $_[0], $_[1] or croak "$Me: open($_[0], $_[1]) failed: $!";
}
sub xclose {
close $_[0] or croak "$Me: close($_[0]) failed: $!";
}
sub fh_is_fd {
return $_[0] =~ /\A=?(\d+)\z/;
}
sub xfileno {
return $1 if $_[0] =~ /\A=?(\d+)\z/; # deal with fh just being an fd
return fileno $_[0];
}
sub _open3 {
local $Me = shift;
# simulate autovivification of filehandles because
# it's too ugly to use @_ throughout to make perl do it for us
# tchrist 5-Mar-00
unless (eval {
1; })
{
# must strip crud for croak to add back, or looks ugly
croak "$Me: $@";
}
# force unqualified filehandles into caller's package
# A tie in the parent should not be allowed to cause problems.
untie *STDIN;
untie *STDOUT;
# If she wants to dup the kid's stderr onto her stdout I need to
# save a copy of her stdout before I put something else there.
}
if ($dup_wtr) {
} else {
}
if ($dup_rdr) {
} else {
}
if ($dup_err) {
# I have to use a fileno here because in this one case
# I'm doing a dup but the filehandle might be a reference
# (from the special case above).
} else {
}
} else {
}
croak "Arguments don't make sense when the command is '-'"
if @cmd > 1;
return 0;
}
local($")=(" ");
exec @cmd # XXX: wrong process to croak from
or croak "$Me: exec of @cmd failed";
} elsif ($do_spawn) {
# All the bookkeeping of coincidence between handles is
# handled in spawn_with_handles.
my @close;
if ($dup_wtr) {
} else {
}
if ($dup_rdr) {
} else {
}
if ($dup_err) {
} else {
}
} else {
}
$kidpid = eval {
{ mode => 'w',
{ mode => 'w',
};
die "$Me: $@" if $@;
}
# If the write handle is a dup give it away entirely, close my copy
# of it.
$kidpid;
}
sub open3 {
if (@_ < 4) {
local $" = ', ';
croak "open3(@_): not enough arguments";
}
return _open3 'open3', scalar caller, @_
}
sub spawn_with_handles {
my $fds = shift; # Fields: handle, mode, open_as
my $close_in_child = shift;
require Fcntl;
}
# If some of handles to redirect-to coincide with handles to
# redirect, we need to use saved variants:
}
unless ($^O eq 'MSWin32') {
# Stderr may be redirected below, so we save the err text:
foreach $fd (@$close_in_child) {
}
}
unless (@errs) {
}
}
return $pid;
}
1; # so require is happy