/*
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
*
* under the terms of the GNU General Public License version 2 only, as
* published by the Free Software Foundation.
*
* This code is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* version 2 for more details (a copy is included in the LICENSE file that
* accompanied this code).
*
* You should have received a copy of the GNU General Public License version
* 2 along with this work; if not, write to the Free Software Foundation,
* Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
*
* Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
* or visit www.oracle.com if you need additional information or have any
* questions.
*/
/*
@test
@bug 6355340
@summary Test correctness of laying out the contents of a frame on maximize
@author anthony.petrov@...: area=awt.toplevel
@library ../../regtesthelpers
@build Util
@run main LayoutOnMaximizeTest
*/
/**
*
* summary: tests the correctness of laying out the contents of a frame on maximize
*/
//*** global search and replace LayoutOnMaximizeTest with name of the test ***
public class LayoutOnMaximizeTest
{
//*** test-writer defined static variables go here ***
private static void init() {
//*** Create instructions for the user here ***
String[] instructions =
{
"This is an AUTOMATIC test, simply wait until it is done.",
"The result (passed or failed) will be shown in the",
"message window below."
};
Sysout.createDialog( );
// We must be sure that the Size system command is exactly the 3rd one in the System menu.
// This is Windows-only test
if (!s.contains("WToolkit")) {
pass();
}
// MAXIMIZED_BOTH is known to be supported on MS Windows.
fail("Toolkit doesn't support the Frame.MAXIMIZED_BOTH extended state.");
}
// Add some components to check their position later
frame.setVisible(true);
// To be sure the window is shown and packed
// The initial JTextField position. After maximization it's supposed to be changed.
// The point to move mouse pointer inside the frame
// Alt-Space opens System menu
// Two "down arrow" presses move the menu selection to the Size menu item.
for (int i = 0; i < 2; i++) {
}
// And finally select the Size command
// Now move the mouse pointer somewhere inside the frame.
// And click once we are inside to imitate the canceling of the size operation.
// Now we maximize the frame
// And check whether the location of the JTextField has changed.
// Location of the component changed if relayouting has happened.
fail("Location of a component has not been changed.");
return;
}
}//End init()
/*****************************************************
* Standard Test Machinery Section
* DO NOT modify anything in this section -- it's a
* standard chunk of code which has all of the
* synchronisation necessary for the test harness.
* By keeping it the same in all tests, it is easier
* to read and understand someone else's test, as
* well as insuring that all tests behave correctly
* with the test harness.
* There is a section following this for test-
* classes
******************************************************/
private static boolean theTestPassed = false;
private static boolean testGeneratedInterrupt = false;
// Not sure about what happens if multiple of this test are
// instantiated in the same VM. Being static (and using
// static vars), it aint gonna work. Not worrying about
// it for now.
{
try
{
init();
}
catch( TestPassedException e )
{
//The test passed, so just return from main and harness will
// interepret this return as a pass
return;
}
//At this point, neither test pass nor test fail has been
// called -- either would have thrown an exception and ended the
// test, so we know we have multiple threads.
//Test involves other threads, so sleep and wait for them to
// called pass() or fail()
try
{
//Timed out, so fail the test
}
catch (InterruptedException e)
{
//The test harness may have interrupted the test. If so, rethrow the exception
// so that the harness gets it and deals with it.
if( ! testGeneratedInterrupt ) throw e;
//reset flag in case hit this code more than once for some reason (just safety)
testGeneratedInterrupt = false;
if ( theTestPassed == false )
{
throw new RuntimeException( failureMessage );
}
}
}//main
{
}
public static synchronized void pass()
{
//first check if this is executing in main thread
{
//Still in the main thread, so set the flag just for kicks,
// and throw a test passed exception which will be caught
// and end the test.
theTestPassed = true;
throw new TestPassedException();
}
theTestPassed = true;
testGeneratedInterrupt = true;
}//pass()
public static synchronized void fail()
{
//test writer didn't specify why test failed, so give generic
fail( "it just plain failed! :-)" );
}
{
//check if this called from main thread
{
//If main thread, fail now 'cause not sleeping
throw new RuntimeException( whyFailed );
}
theTestPassed = false;
testGeneratedInterrupt = true;
}//fail()
}// class LayoutOnMaximizeTest
//This exception is used to exit from any level of call nesting
// when it's determined that the test has passed, and immediately
// end the test.
{
}
//*********** End Standard Test Machinery Section **********
//************ Begin classes defined for the test ****************
// if want to make listeners, here is the recommended place for them, then instantiate
// them in init()
/* Example of a class which may be written as part of a test
class NewClass implements anInterface
{
static int newVar = 0;
public void eventDispatched(AWTEvent e)
{
//Counting events to see if we get enough
eventCount++;
if( eventCount == 20 )
{
//got enough events, so pass
LayoutOnMaximizeTest.pass();
}
else if( tries == 20 )
{
//tried too many times without getting enough events so fail
LayoutOnMaximizeTest.fail();
}
}// eventDispatched()
}// NewClass class
*/
//************** End classes defined for the test *******************
/****************************************************
Standard Test Machinery
DO NOT modify anything below -- it's a standard
chunk of code whose purpose is to make user
interaction uniform, and thereby make it simpler
to read and understand someone else's test.
****************************************************/
/**
This is part of the standard test machinery.
It creates a dialog (with the instructions), and is the interface
for sending text messages to the user.
To print the instructions, send an array of strings to Sysout.createDialog
WithInstructions method. Put one line of instructions per array entry.
To display a message for the tester to see, simply call Sysout.println
with the string to be displayed.
This mimics System.out.println but works within the test harness as well
as standalone.
*/
class Sysout
{
{
dialog.setVisible(true);
println( "Any messages for the tester will display here." );
}
public static void createDialog( )
{
dialog.setVisible(true);
println( "Any messages for the tester will display here." );
}
{
}
{
}
}// Sysout class
/**
This is part of the standard test machinery. It provides a place for the
test instructions to be displayed, and a place for interactive messages
to the user to be displayed.
To have the test instructions displayed, see Sysout.
To have a message to the user be displayed, see Sysout.
Do not call anything in this dialog directly.
*/
{
//DO NOT call this directly, go through Sysout
{
pack();
setVisible(true);
}// TestDialog()
//DO NOT call this directly, go through Sysout
{
//Clear out any current instructions
//Go down array of instruction strings
{
//chop up each into pieces maxSringLength long
remainingStr = instructions[ i ];
{
//if longer than max then chop off first max chars to print
{
//Try to chop on a word boundary
int posOfSpace = remainingStr.
}
//else just print
else
{
remainingStr = "";
}
}// while
}// for
}//printInstructions()
//DO NOT call this directly, go through Sysout
{
}
}// TestDialog class