/*
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
*
* under the terms of the GNU General Public License version 2 only, as
* published by the Free Software Foundation. Oracle designates this
* particular file as subject to the "Classpath" exception as provided
* by Oracle in the LICENSE file that accompanied this code.
*
* This code is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* version 2 for more details (a copy is included in the LICENSE file that
* accompanied this code).
*
* You should have received a copy of the GNU General Public License version
* 2 along with this work; if not, write to the Free Software Foundation,
* Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
*
* Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
* or visit www.oracle.com if you need additional information or have any
* questions.
*/
/**
* A <code>PushbackInputStream</code> adds
* functionality to another input stream, namely
* the ability to "push back" or "unread"
* one byte. This is useful in situations where
* it is convenient for a fragment of code
* to read an indefinite number of data bytes
* that are delimited by a particular byte
* value; after reading the terminating byte,
* the code fragment can "unread" it, so that
* the next read operation on the input stream
* will reread the byte that was pushed back.
* For example, bytes representing the characters
* constituting an identifier might be terminated
* by a byte representing an operator character;
* a method whose job is to read just an identifier
* can read until it sees the operator and
* then push the operator back to be re-read.
*
* @author David Connelly
* @author Jonathan Payne
* @since JDK1.0
*/
public
/**
* The pushback buffer.
* @since JDK1.1
*/
protected byte[] buf;
/**
* The position within the pushback buffer from which the next byte will
* be read. When the buffer is empty, <code>pos</code> is equal to
* <code>buf.length</code>; when the buffer is full, <code>pos</code> is
* equal to zero.
*
* @since JDK1.1
*/
protected int pos;
/**
* Check to make sure that this stream has not been closed
*/
throw new IOException("Stream closed");
}
/**
* Creates a <code>PushbackInputStream</code>
* with a pushback buffer of the specified <code>size</code>,
* and saves its argument, the input stream
* <code>in</code>, for later use. Initially,
* there is no pushed-back byte (the field
* <code>pushBack</code> is initialized to
* <code>-1</code>).
*
* @param in the input stream from which bytes will be read.
* @param size the size of the pushback buffer.
* @exception IllegalArgumentException if size is <= 0
* @since JDK1.1
*/
super(in);
if (size <= 0) {
throw new IllegalArgumentException("size <= 0");
}
}
/**
* Creates a <code>PushbackInputStream</code>
* and saves its argument, the input stream
* <code>in</code>, for later use. Initially,
* there is no pushed-back byte (the field
* <code>pushBack</code> is initialized to
* <code>-1</code>).
*
* @param in the input stream from which bytes will be read.
*/
this(in, 1);
}
/**
* Reads the next byte of data from this input stream. The value
* byte is returned as an <code>int</code> in the range
* <code>0</code> to <code>255</code>. If no byte is available
* because the end of the stream has been reached, the value
* <code>-1</code> is returned. This method blocks until input data
* is available, the end of the stream is detected, or an exception
* is thrown.
*
* <p> This method returns the most recently pushed-back byte, if there is
* one, and otherwise calls the <code>read</code> method of its underlying
* input stream and returns whatever value that method returns.
*
* @return the next byte of data, or <code>-1</code> if the end of the
* stream has been reached.
* @exception IOException if this input stream has been closed by
* invoking its {@link #close()} method,
* or an I/O error occurs.
* @see java.io.InputStream#read()
*/
ensureOpen();
}
return super.read();
}
/**
* Reads up to <code>len</code> bytes of data from this input stream into
* an array of bytes. This method first reads any pushed-back bytes; after
* that, if fewer than <code>len</code> bytes have been read then it
* reads from the underlying input stream. If <code>len</code> is not zero, the method
* blocks until at least 1 byte of input is available; otherwise, no
* bytes are read and <code>0</code> is returned.
*
* @param b the buffer into which the data is read.
* @param off the start offset in the destination array <code>b</code>
* @param len the maximum number of bytes read.
* @return the total number of bytes read into the buffer, or
* <code>-1</code> if there is no more data because the end of
* the stream has been reached.
* @exception NullPointerException If <code>b</code> is <code>null</code>.
* @exception IndexOutOfBoundsException If <code>off</code> is negative,
* <code>len</code> is negative, or <code>len</code> is greater than
* <code>b.length - off</code>
* @exception IOException if this input stream has been closed by
* invoking its {@link #close()} method,
* or an I/O error occurs.
* @see java.io.InputStream#read(byte[], int, int)
*/
ensureOpen();
if (b == null) {
throw new NullPointerException();
throw new IndexOutOfBoundsException();
} else if (len == 0) {
return 0;
}
if (avail > 0) {
}
}
if (len > 0) {
if (len == -1) {
}
}
return avail;
}
/**
* Pushes back a byte by copying it to the front of the pushback buffer.
* After this method returns, the next byte to be read will have the value
* <code>(byte)b</code>.
*
* @param b the <code>int</code> value whose low-order
* byte is to be pushed back.
* @exception IOException If there is not enough room in the pushback
* buffer for the byte, or this input stream has been closed by
* invoking its {@link #close()} method.
*/
ensureOpen();
if (pos == 0) {
throw new IOException("Push back buffer is full");
}
}
/**
* Pushes back a portion of an array of bytes by copying it to the front
* of the pushback buffer. After this method returns, the next byte to be
* read will have the value <code>b[off]</code>, the byte after that will
* have the value <code>b[off+1]</code>, and so forth.
*
* @param b the byte array to push back.
* @param off the start offset of the data.
* @param len the number of bytes to push back.
* @exception IOException If there is not enough room in the pushback
* buffer for the specified number of bytes,
* or this input stream has been closed by
* invoking its {@link #close()} method.
* @since JDK1.1
*/
ensureOpen();
throw new IOException("Push back buffer is full");
}
}
/**
* Pushes back an array of bytes by copying it to the front of the
* pushback buffer. After this method returns, the next byte to be read
* will have the value <code>b[0]</code>, the byte after that will have the
* value <code>b[1]</code>, and so forth.
*
* @param b the byte array to push back
* @exception IOException If there is not enough room in the pushback
* buffer for the specified number of bytes,
* or this input stream has been closed by
* invoking its {@link #close()} method.
* @since JDK1.1
*/
}
/**
* Returns an estimate of the number of bytes that can be read (or
* skipped over) from this input stream without blocking by the next
* invocation of a method for this input stream. The next invocation might be
* the same thread or another thread. A single read or skip of this
* many bytes will not block, but may read or skip fewer bytes.
*
* <p> The method returns the sum of the number of bytes that have been
* pushed back and the value returned by {@link
* java.io.FilterInputStream#available available}.
*
* @return the number of bytes that can be read (or skipped over) from
* the input stream without blocking.
* @exception IOException if this input stream has been closed by
* invoking its {@link #close()} method,
* or an I/O error occurs.
* @see java.io.FilterInputStream#in
* @see java.io.InputStream#available()
*/
ensureOpen();
: n + avail;
}
/**
* Skips over and discards <code>n</code> bytes of data from this
* input stream. The <code>skip</code> method may, for a variety of
* reasons, end up skipping over some smaller number of bytes,
* possibly zero. If <code>n</code> is negative, no bytes are skipped.
*
* <p> The <code>skip</code> method of <code>PushbackInputStream</code>
* first skips over the bytes in the pushback buffer, if any. It then
* calls the <code>skip</code> method of the underlying input stream if
* more bytes need to be skipped. The actual number of bytes skipped
* is returned.
*
* @param n {@inheritDoc}
* @return {@inheritDoc}
* @exception IOException if the stream does not support seek,
* or the stream has been closed by
* invoking its {@link #close()} method,
* or an I/O error occurs.
* @see java.io.FilterInputStream#in
* @see java.io.InputStream#skip(long n)
* @since 1.2
*/
ensureOpen();
if (n <= 0) {
return 0;
}
if (pskip > 0) {
if (n < pskip) {
pskip = n;
}
n -= pskip;
}
if (n > 0) {
}
return pskip;
}
/**
* Tests if this input stream supports the <code>mark</code> and
* <code>reset</code> methods, which it does not.
*
* @return <code>false</code>, since this class does not support the
* <code>mark</code> and <code>reset</code> methods.
* @see java.io.InputStream#mark(int)
* @see java.io.InputStream#reset()
*/
public boolean markSupported() {
return false;
}
/**
* Marks the current position in this input stream.
*
* <p> The <code>mark</code> method of <code>PushbackInputStream</code>
* does nothing.
*
* @param readlimit the maximum limit of bytes that can be read before
* the mark position becomes invalid.
* @see java.io.InputStream#reset()
*/
}
/**
* Repositions this stream to the position at the time the
* <code>mark</code> method was last called on this input stream.
*
* <p> The method <code>reset</code> for class
* <code>PushbackInputStream</code> does nothing except throw an
* <code>IOException</code>.
*
* @exception IOException if this method is invoked.
* @see java.io.InputStream#mark(int)
* @see java.io.IOException
*/
throw new IOException("mark/reset not supported");
}
/**
* Closes this input stream and releases any system resources
* associated with the stream.
* Once the stream has been closed, further read(), unread(),
* available(), reset(), or skip() invocations will throw an IOException.
* Closing a previously closed stream has no effect.
*
* @exception IOException if an I/O error occurs.
*/
return;
}
}