/*
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
*
* under the terms of the GNU General Public License version 2 only, as
* published by the Free Software Foundation. Oracle designates this
* particular file as subject to the "Classpath" exception as provided
* by Oracle in the LICENSE file that accompanied this code.
*
* This code is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* version 2 for more details (a copy is included in the LICENSE file that
* accompanied this code).
*
* You should have received a copy of the GNU General Public License version
* 2 along with this work; if not, write to the Free Software Foundation,
* Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
*
* Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
* or visit www.oracle.com if you need additional information or have any
* questions.
*/
/**
* This class is an input stream filter that provides the added
* functionality of keeping track of the current line number.
* <p>
* A line is a sequence of bytes ending with a carriage return
* character (<code>'\r'</code>), a newline character
* (<code>'\n'</code>), or a carriage return character followed
* immediately by a linefeed character. In all three cases, the line
* terminating character(s) are returned as a single newline character.
* <p>
* The line number begins at <code>0</code>, and is incremented by
* <code>1</code> when a <code>read</code> returns a newline character.
*
* @author Arthur van Hoff
* @see java.io.LineNumberReader
* @since JDK1.0
* @deprecated This class incorrectly assumes that bytes adequately represent
* characters. As of JDK 1.1, the preferred way to operate on
* character streams is via the new character-stream classes, which
* include a class for counting line numbers.
*/
public
int lineNumber;
int markLineNumber;
/**
* Constructs a newline number input stream that reads its input
* from the specified input stream.
*
* @param in the underlying input stream.
*/
super(in);
}
/**
* Reads the next byte of data from this input stream. The value
* byte is returned as an <code>int</code> in the range
* <code>0</code> to <code>255</code>. If no byte is available
* because the end of the stream has been reached, the value
* <code>-1</code> is returned. This method blocks until input data
* is available, the end of the stream is detected, or an exception
* is thrown.
* <p>
* The <code>read</code> method of
* <code>LineNumberInputStream</code> calls the <code>read</code>
* method of the underlying input stream. It checks for carriage
* returns and newline characters in the input, and modifies the
* current line number as appropriate. A carriage-return character or
* a carriage return followed by a newline character are both
* converted into a single newline character.
*
* @return the next byte of data, or <code>-1</code> if the end of this
* stream is reached.
* @exception IOException if an I/O error occurs.
* @see java.io.FilterInputStream#in
* @see java.io.LineNumberInputStream#getLineNumber()
*/
int c = pushBack;
if (c != -1) {
pushBack = -1;
} else {
}
switch (c) {
case '\r':
if (pushBack == '\n') {
pushBack = -1;
}
case '\n':
lineNumber++;
return '\n';
}
return c;
}
/**
* Reads up to <code>len</code> bytes of data from this input stream
* into an array of bytes. This method blocks until some input is available.
* <p>
* The <code>read</code> method of
* <code>LineNumberInputStream</code> repeatedly calls the
* <code>read</code> method of zero arguments to fill in the byte array.
*
* @param b the buffer into which the data is read.
* @param off the start offset of the data.
* @param len the maximum number of bytes read.
* @return the total number of bytes read into the buffer, or
* <code>-1</code> if there is no more data because the end of
* this stream has been reached.
* @exception IOException if an I/O error occurs.
* @see java.io.LineNumberInputStream#read()
*/
if (b == null) {
throw new NullPointerException();
throw new IndexOutOfBoundsException();
} else if (len == 0) {
return 0;
}
int c = read();
if (c == -1) {
return -1;
}
b[off] = (byte)c;
int i = 1;
try {
for (; i < len ; i++) {
c = read();
if (c == -1) {
break;
}
if (b != null) {
b[off + i] = (byte)c;
}
}
} catch (IOException ee) {
}
return i;
}
/**
* Skips over and discards <code>n</code> bytes of data from this
* input stream. The <code>skip</code> method may, for a variety of
* reasons, end up skipping over some smaller number of bytes,
* possibly <code>0</code>. The actual number of bytes skipped is
* returned. If <code>n</code> is negative, no bytes are skipped.
* <p>
* The <code>skip</code> method of <code>LineNumberInputStream</code> creates
* a byte array and then repeatedly reads into it until
* <code>n</code> bytes have been read or the end of the stream has
* been reached.
*
* @param n the number of bytes to be skipped.
* @return the actual number of bytes skipped.
* @exception IOException if an I/O error occurs.
* @see java.io.FilterInputStream#in
*/
int chunk = 2048;
long remaining = n;
byte data[];
int nr;
if (n <= 0) {
return 0;
}
while (remaining > 0) {
if (nr < 0) {
break;
}
}
return n - remaining;
}
/**
* Sets the line number to the specified argument.
*
* @param lineNumber the new line number.
* @see #getLineNumber
*/
this.lineNumber = lineNumber;
}
/**
* Returns the current line number.
*
* @return the current line number.
* @see #setLineNumber
*/
public int getLineNumber() {
return lineNumber;
}
/**
* Returns the number of bytes that can be read from this input
* stream without blocking.
* <p>
* Note that if the underlying input stream is able to supply
* <i>k</i> input characters without blocking, the
* <code>LineNumberInputStream</code> can guarantee only to provide
* <i>k</i>/2 characters without blocking, because the
* <i>k</i> characters from the underlying input stream might
* consist of <i>k</i>/2 pairs of <code>'\r'</code> and
* <code>'\n'</code>, which are converted to just
* <i>k</i>/2 <code>'\n'</code> characters.
*
* @return the number of bytes that can be read from this input stream
* without blocking.
* @exception IOException if an I/O error occurs.
* @see java.io.FilterInputStream#in
*/
}
/**
* Marks the current position in this input stream. A subsequent
* call to the <code>reset</code> method repositions this stream at
* the last marked position so that subsequent reads re-read the same bytes.
* <p>
* The <code>mark</code> method of
* <code>LineNumberInputStream</code> remembers the current line
* number in a private variable, and then calls the <code>mark</code>
* method of the underlying input stream.
*
* @param readlimit the maximum limit of bytes that can be read before
* the mark position becomes invalid.
* @see java.io.FilterInputStream#in
* @see java.io.LineNumberInputStream#reset()
*/
}
/**
* Repositions this stream to the position at the time the
* <code>mark</code> method was last called on this input stream.
* <p>
* The <code>reset</code> method of
* <code>LineNumberInputStream</code> resets the line number to be
* the line number at the time the <code>mark</code> method was
* called, and then calls the <code>reset</code> method of the
* underlying input stream.
* <p>
* Stream marks are intended to be used in
* situations where you need to read ahead a little to see what's in
* the stream. Often this is most easily done by invoking some
* general parser. If the stream is of the type handled by the
* parser, it just chugs along happily. If the stream is not of
* that type, the parser should toss an exception when it fails,
* which, if it happens within readlimit bytes, allows the outer
* code to reset the stream and try another parser.
*
* @exception IOException if an I/O error occurs.
* @see java.io.FilterInputStream#in
* @see java.io.LineNumberInputStream#mark(int)
*/
}
}