/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright 2006 Sun Microsystems, Inc. All rights reserved.
* Use is subject to license terms.
*/
#pragma ident "%Z%%M% %I% %E% SMI"
#include <sys/param.h>
#include <sys/errno.h>
#include <sys/asm_linkage.h>
#include <sys/vtrace.h>
#include <sys/machthread.h>
#include <sys/clock.h>
#include <sys/asi.h>
#include <sys/fsr.h>
#include <sys/privregs.h>
#if !defined(lint)
#include "assym.h"
#endif /* lint */
/*
* Error barrier:
* We use membar sync to establish an error barrier for
* deferred errors. Membar syncs are added before any update
* to t_lofault to ensure that deferred errors from earlier
* accesses will not be reported after the membar. This error
* isolation is important when we try to recover from async
* errors which tries to distinguish kernel accesses to user
* data.
*/
/*
* Copy a null terminated string from one point to another in
* the kernel address space.
* NOTE - don't use %o5 in this routine as copy{in,out}str uses it.
*
* copystr(from, to, maxlength, lencopied)
* caddr_t from, to;
* u_int maxlength, *lencopied;
*/
#if defined(lint)
/* ARGSUSED */
int
copystr(const char *from, char *to, size_t maxlength, size_t *lencopied)
{ return(0); }
#else /* lint */
ENTRY(copystr)
orcc %o2, %g0, %o4 ! save original count
bg,a %ncc, 1f
sub %o0, %o1, %o0 ! o0 gets the difference of src and dst
!
! maxlength <= 0
!
bz %ncc, .cs_out ! maxlength = 0
mov ENAMETOOLONG, %o0
b 2f ! maxlength < 0
mov EFAULT, %o0 ! return failure
!
! Do a byte by byte loop.
! We do this instead of a word by word copy because most strings
! are small and this takes a small number of cache lines.
!
0:
stb %g1, [%o1] ! store byte
tst %g1
bnz,pt %icc, 1f
add %o1, 1, %o1 ! incr dst addr
ba,pt %ncc, .cs_out ! last byte in string
mov 0, %o0 ! ret code = 0
1:
subcc %o2, 1, %o2 ! test count
bgeu,a %ncc, 0b
ldub [%o0 + %o1], %g1 ! delay slot, get source byte
mov 0, %o2 ! max number of bytes moved
mov ENAMETOOLONG, %o0 ! ret code = ENAMETOOLONG
.cs_out:
tst %o3
bz %ncc, 2f
sub %o4, %o2, %o4 ! compute length and store it
stn %o4, [%o3]
2:
retl
nop
SET_SIZE(copystr)
#endif /* lint */
/*
* Copy a null terminated string from the user address space into
* the kernel address space.
*/
#if defined(lint)
/* ARGSUSED */
int
copyinstr(const char *uaddr, char *kaddr, size_t maxlength,
size_t *lencopied)
{ return (0); }
#else /* lint */
ENTRY(copyinstr)
sethi %hi(.copyinstr_err), %o4
ldn [THREAD_REG + T_LOFAULT], %o5 ! catch faults
or %o4, %lo(.copyinstr_err), %o4
membar #Sync ! sync error barrier
stn %o4, [THREAD_REG + T_LOFAULT]
brz,a,pn %o2, .copyinstr_out
mov ENAMETOOLONG, %o0
mov %o2, %g3 ! g3 is the current count
mov %o1, %g4 ! g4 is the dest addr
b 1f
sub %o0, %o1, %g2 ! g2 gets the difference of src and dst
!
! Do a byte by byte loop.
! We do this instead of a word by word copy because most strings
! are small and this takes a small number of cache lines.
!
0:
stb %g1, [%g4] ! store byte
tst %g1
bnz,pt %icc, 1f
add %g4, 1, %g4 ! incr dst addr
ba,pt %ncc, .copyinstr_out ! last byte in string
mov 0, %o0 ! ret code = 0
1:
subcc %g3, 1, %g3 ! test count
bgeu,a %ncc, 0b
lduba [%g2+%g4]ASI_USER, %g1 ! delay slot, get source byte
mov 0, %g3 ! max number of bytes moved
ba,pt %ncc, .copyinstr_out
mov ENAMETOOLONG, %o0 ! ret code = ENAMETOOLONG
/*
* Fault while trying to move from or to user space.
* Set and return error code.
*/
.copyinstr_err:
membar #Sync ! sync error barrier
stn %o5, [THREAD_REG + T_LOFAULT]
ldn [THREAD_REG + T_COPYOPS], %o4
brz %o4, 1f
nop
ldn [%o4 + CP_COPYINSTR], %g1
jmp %g1
nop
1:
retl
mov EFAULT, %o0
.copyinstr_out:
tst %o3 ! want length?
bz %ncc, 2f
sub %o2, %g3, %o2 ! compute length and store it
stn %o2, [%o3]
2:
membar #Sync ! sync error barrier
retl
stn %o5, [THREAD_REG + T_LOFAULT] ! stop catching faults
SET_SIZE(copyinstr)
#endif
#if defined(lint)
/* ARGSUSED */
int
copyinstr_noerr(const char *uaddr, char *kaddr, size_t maxlength,
size_t *lencopied)
{ return (0); }
#else /* lint */
ENTRY(copyinstr_noerr)
mov %o2, %o4 ! save original count
! maxlength is unsigned so the only error is if it's 0
brz,a,pn %o2, .copyinstr_noerr_out
mov ENAMETOOLONG, %o0
b 1f
sub %o0, %o1, %o0 ! o0 gets the difference of src and dst
!
! Do a byte by byte loop.
! We do this instead of a word by word copy because most strings
! are small and this takes a small number of cache lines.
!
0:
stb %g1, [%o1] ! store byte
tst %g1 ! null byte?
bnz 1f
add %o1, 1, %o1 ! incr dst addr
ba,pt %ncc, .copyinstr_noerr_out ! last byte in string
mov 0, %o0 ! ret code = 0
1:
subcc %o2, 1, %o2 ! test count
bgeu,a %ncc, 0b
lduba [%o0 + %o1]ASI_USER, %g1 ! delay slot, get source byte
mov 0, %o2 ! max number of bytes moved
b .copyinstr_noerr_out
mov ENAMETOOLONG, %o0 ! ret code = ENAMETOOLONG
.copyinstr_noerr_out:
tst %o3 ! want length?
bz %ncc, 2f
sub %o4, %o2, %o4
stn %o4, [%o3]
2:
retl
nop
SET_SIZE(copyinstr_noerr)
#endif /* lint */
/*
* Copy a null terminated string from the kernel
* address space to the user address space.
*/
#if defined(lint)
/* ARGSUSED */
int
copyoutstr(const char *kaddr, char *uaddr, size_t maxlength,
size_t *lencopied)
{ return (0); }
#else /* lint */
ENTRY(copyoutstr)
sethi %hi(.copyoutstr_err), %o5
ldn [THREAD_REG + T_LOFAULT], %o4 ! catch faults
or %o5, %lo(.copyoutstr_err), %o5
membar #Sync ! sync error barrier
stn %o5, [THREAD_REG + T_LOFAULT]
mov %o4, %o5
brz,a,pn %o2, .copyoutstr_out
mov ENAMETOOLONG, %o0
mov %o2, %g3 ! g3 is the current count
mov %o1, %g4 ! g4 is the dest addr
b 1f
sub %o0, %o1, %g2 ! g2 gets the difference of src and dst
!
! Do a byte by byte loop.
! We do this instead of a word by word copy because most strings
! are small and this takes a small number of cache lines.
!
0:
stba %g1, [%g4]ASI_USER ! store byte
tst %g1
bnz,pt %icc, 1f
add %g4, 1, %g4 ! incr dst addr
ba,pt %ncc, .copyoutstr_out ! last byte in string
mov 0, %o0 ! ret code = 0
1:
subcc %g3, 1, %g3 ! test count
bgeu,a %ncc, 0b
ldub [%g2 + %g4], %g1 ! delay slot, get source byte
mov 0, %g3 ! max number of bytes moved
ba,pt %ncc, .copyoutstr_out
mov ENAMETOOLONG, %o0 ! ret code = ENAMETOOLONG
/*
* Fault while trying to move from or to user space.
* Set and return error code.
*/
.copyoutstr_err:
membar #Sync ! sync error barrier
stn %o5, [THREAD_REG + T_LOFAULT]
ldn [THREAD_REG + T_COPYOPS], %o4
brz %o4, 1f
nop
ldn [%o4 + CP_COPYOUTSTR], %g1
jmp %g1
nop
1:
retl
mov EFAULT, %o0
.copyoutstr_out:
tst %o3 ! want length?
bz %ncc, 2f
sub %o2, %g3, %o2 ! compute length and store it
stn %o2, [%o3]
2:
membar #Sync ! sync error barrier
retl
stn %o5, [THREAD_REG + T_LOFAULT] ! stop catching faults
SET_SIZE(copyoutstr)
#endif /* lint */
#if defined(lint)
/* ARGSUSED */
int
copyoutstr_noerr(const char *kaddr, char *uaddr, size_t maxlength,
size_t *lencopied)
{ return (0); }
#else /* lint */
ENTRY(copyoutstr_noerr)
mov %o2, %o4 ! save original count
brz,a,pn %o2, .copyoutstr_noerr_out
mov ENAMETOOLONG, %o0
b 1f
sub %o0, %o1, %o0 ! o0 gets the difference of src and dst
!
! Do a byte by byte loop.
! We do this instead of a word by word copy because most strings
! are small and this takes a small number of cache lines.
!
0:
stba %g1, [%o1]ASI_USER ! store byte
tst %g1 ! null byte?
bnz 1f
add %o1, 1, %o1 ! incr dst addr
b .copyoutstr_noerr_out ! last byte in string
mov 0, %o0 ! ret code = 0
1:
subcc %o2, 1, %o2 ! test count
bgeu,a %ncc, 0b
ldub [%o0+%o1], %g1 ! delay slot, get source byte
mov 0, %o2 ! max number of bytes moved
b .copyoutstr_noerr_out
mov ENAMETOOLONG, %o0 ! ret code = ENAMETOOLONG
.copyoutstr_noerr_out:
tst %o3 ! want length?
bz %ncc, 2f
sub %o4, %o2, %o4
stn %o4, [%o3]
2:
retl
nop
SET_SIZE(copyoutstr_noerr)
#endif /* lint */
/*
* Copy a block of storage. If the source and target regions overlap,
* one or both of the regions will be silently corrupted.
* No fault handler installed (to be called under on_fault())
*/
#if defined(lint)
/* ARGSUSED */
void
ucopy(const void *ufrom, void *uto, size_t ulength)
{}
#else /* lint */
ENTRY(ucopy)
save %sp, -SA(MINFRAME), %sp ! get another window
subcc %g0, %i2, %i3
add %i0, %i2, %i0
bz,pn %ncc, 5f
add %i1, %i2, %i1
lduba [%i0 + %i3]ASI_USER, %i4
4: stba %i4, [%i1 + %i3]ASI_USER
inccc %i3
bcc,a,pt %ncc, 4b
lduba [%i0 + %i3]ASI_USER, %i4
5:
ret
restore %g0, 0, %o0 ! return (0)
SET_SIZE(ucopy)
#endif /* lint */
/*
* Copy a user-land string. If the source and target regions overlap,
* one or both of the regions will be silently corrupted.
* No fault handler installed (to be called under on_fault())
*/
#if defined(lint)
/* ARGSUSED */
void
ucopystr(const char *ufrom, char *uto, size_t umaxlength, size_t *ulencopied)
{}
#else /* lint */
ENTRY(ucopystr)
save %sp, -SA(MINFRAME), %sp ! get another window
brz %i2, 5f
clr %i5
lduba [%i0 + %i5]ASI_USER, %i4
4: stba %i4, [%i1 + %i5]ASI_USER
brz,pn %i4, 5f
inc %i5
deccc %i2
bnz,a,pt %ncc, 4b
lduba [%i0 + %i5]ASI_USER, %i4
5:
brnz,a,pt %i3, 6f
stn %i5, [%i3]
6:
ret
restore %g0, 0, %o0 ! return (0)
SET_SIZE(ucopystr)
#endif /* lint */