#
# CDDL HEADER START
#
# The contents of this file are subject to the terms of the
# Common Development and Distribution License (the "License").
# You may not use this file except in compliance with the License.
#
# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
# See the License for the specific language governing permissions
# and limitations under the License.
#
# When distributing Covered Code, include this CDDL HEADER in each
# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
# If applicable, add the following below this CDDL HEADER, with the
# fields enclosed by brackets "[]" replaced with your own identifying
# information: Portions Copyright [yyyy] [name of copyright owner]
#
# CDDL HEADER END
#
# Copyright 2009 Sun Microsystems, Inc. All rights reserved.
# Use is subject to license terms.
#
#
# Portions Copyright (c) Siemens 1999
# All rights reserved.
#
# WARNING: enabling this driver may impact the security and data integrity of
# devices on your system. Please refer to sgen(7d) for details.
#
# There are two ways of configuring sgen: by establishing an association
# between a compatible alias for a device and the sgen driver via
# "add_drv -i", or by using this file (sgen.conf).
#--------------------------add_drv binding method-----------------------------
# SCSI target devices are now self-identifying in Solaris. Add_drv is the
# preferred method to control driver binding, it avoids issues associated
# with multiple driver.conf files associating more than one driver with a
# device. The compatible property forms for SCSI target devices used in the
# add_drv command are described in scsi(4).
#
# USAGE EXAMPLE (add_drv)
#
# In this example, sgen is configured to bind to all scanner and ocrw devices
# in the system, as well as the UltraToast 4000 disk from ACME using the
# add_drv configuration method.
#
# add_drv -i \
# '"scsiclass,06" "scsiclass,0f" "scsiclass,00.vACME,pUltraToast_4000"' sgen
#-------------------------sgen.conf binding method----------------------------
# NOTE: Support for sgen.conf configuration may be removed in a future release
# of Solaris.
#
# The the remainder of this file is concerned with the .conf file
# configuration method. Sgen may be configured to bind to SCSI devices
# exporting a particular device type, using the device-type-config-list, which
# is a ',' delimited list of strings.
#
#device-type-config-list=
# "direct" (type 0x00)
# "sequential" (type 0x01)
# "printer" (type 0x02)
# "processor" (type 0x03)
# "worm" (type 0x04)
# "rodirect" (type 0x05)
# "scanner" (type 0x06)
# "optical" (type 0x07)
# "changer" (type 0x08)
# "comm" (type 0x09)
# "prepress1" (type 0x0A)
# "prepress2" (type 0x0B)
# "array_ctrl" (type 0x0C)
# "ses" (type 0x0D)
# "rbc" (type 0x0E)
# "ocrw" (type 0x0F)
# "bridge" (type 0x10)
# "type_0x<typenum>" (types 0x11-0x1e are undefined by SCSI-3)
# "type_unknown" (type 0x1f)
#
# In addition to binding to device types, sgen can be configured to bind to one
# or more particular devices. The latter is accomplished by specifying the
# Vendor and Product IDs returned by the device in response to the SCSI INQUIRY
# command. This is accomplished by specifying pairs of Vendor ID and Product ID
# strings in the inquiry-config-list property, below. "*" may be substituted
# for the vendor ID as a wildcard. See sgen(7D) for details and extended usage
# examples.
#
# USAGE EXAMPLE (sgen.conf)
#
# In this example, sgen is configured to bind to all scanner and ocrw devices in
# the system, as well as the UltraToast 4000 from ACME, and the PowerToast
# series of devices, regardless of vendor.
#
#device-type-config-list="scanner", "ocrw";
#
#inquiry-config-list= "ACME", "UltraToast 4000",
# "*", "PowerToast";
#
# When using the sgen.conf method, after configuring the
# control. If it is expected that devices controlled by sgen will be hotplugged
# or added into the system later, it is recommended that all of the following
# lines be uncommented.
#
#name="sgen" class="scsi" target=0 lun=0;
#name="sgen" class="scsi" target=1 lun=0;
#name="sgen" class="scsi" target=2 lun=0;
#name="sgen" class="scsi" target=3 lun=0;
#name="sgen" class="scsi" target=4 lun=0;
#name="sgen" class="scsi" target=5 lun=0;
#name="sgen" class="scsi" target=6 lun=0;
#name="sgen" class="scsi" target=7 lun=0;
#name="sgen" class="scsi" target=8 lun=0;
#name="sgen" class="scsi" target=9 lun=0;
#name="sgen" class="scsi" target=10 lun=0;
#name="sgen" class="scsi" target=11 lun=0;
#name="sgen" class="scsi" target=12 lun=0;
#name="sgen" class="scsi" target=13 lun=0;
#name="sgen" class="scsi" target=14 lun=0;
#name="sgen" class="scsi" target=15 lun=0;