e1000_phy.h revision 4d7379630d53d9992780329b674af8c85935e858
/*
* This file is provided under a CDDLv1 license. When using or
* redistributing this file, you may do so under this license.
* In redistributing this file this license must be included
* and no other modification of this header file is permitted.
*
* CDDL LICENSE SUMMARY
*
* Copyright(c) 1999 - 2008 Intel Corporation. All rights reserved.
*
* The contents of this file are subject to the terms of Version
* 1.0 of the Common Development and Distribution License (the "License").
*
* You should have received a copy of the License with this software.
* You can obtain a copy of the License at
* http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*/
/*
* Copyright 2008 Sun Microsystems, Inc. All rights reserved.
* Use is subject to license terms of the CDDLv1.
*/
/*
* IntelVersion: 1.47 v2008-7-17_MountAngel2
*/
#ifndef _E1000_PHY_H_
#define _E1000_PHY_H_
#ifdef __cplusplus
extern "C" {
#endif
typedef enum {
e1000_ms_hw_default = 0,
e1000_ms_force_master,
e1000_ms_force_slave,
e1000_ms_auto
} e1000_ms_type;
typedef enum {
e1000_smart_speed_default = 0,
e1000_smart_speed_on,
e1000_smart_speed_off
} e1000_smart_speed;
void e1000_init_phy_ops_generic(struct e1000_hw *hw);
s32 e1000_null_read_reg(struct e1000_hw *hw, u32 offset, u16 *data);
void e1000_null_phy_generic(struct e1000_hw *hw);
s32 e1000_null_lplu_state(struct e1000_hw *hw, bool active);
s32 e1000_null_write_reg(struct e1000_hw *hw, u32 offset, u16 data);
s32 e1000_check_downshift_generic(struct e1000_hw *hw);
s32 e1000_check_polarity_m88(struct e1000_hw *hw);
s32 e1000_check_polarity_igp(struct e1000_hw *hw);
s32 e1000_check_reset_block_generic(struct e1000_hw *hw);
s32 e1000_copper_link_autoneg(struct e1000_hw *hw);
s32 e1000_copper_link_setup_igp(struct e1000_hw *hw);
s32 e1000_copper_link_setup_m88(struct e1000_hw *hw);
s32 e1000_phy_force_speed_duplex_igp(struct e1000_hw *hw);
s32 e1000_phy_force_speed_duplex_m88(struct e1000_hw *hw);
s32 e1000_get_cable_length_m88(struct e1000_hw *hw);
s32 e1000_get_cable_length_igp_2(struct e1000_hw *hw);
s32 e1000_get_cfg_done_generic(struct e1000_hw *hw);
s32 e1000_get_phy_id(struct e1000_hw *hw);
s32 e1000_get_phy_info_igp(struct e1000_hw *hw);
s32 e1000_get_phy_info_m88(struct e1000_hw *hw);
s32 e1000_phy_sw_reset_generic(struct e1000_hw *hw);
void e1000_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl);
s32 e1000_phy_hw_reset_generic(struct e1000_hw *hw);
s32 e1000_phy_reset_dsp_generic(struct e1000_hw *hw);
s32 e1000_phy_setup_autoneg(struct e1000_hw *hw);
s32 e1000_read_kmrn_reg_generic(struct e1000_hw *hw, u32 offset, u16 *data);
s32 e1000_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data);
s32 e1000_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data);
s32 e1000_set_d3_lplu_state_generic(struct e1000_hw *hw, bool active);
s32 e1000_setup_copper_link_generic(struct e1000_hw *hw);
s32 e1000_wait_autoneg_generic(struct e1000_hw *hw);
s32 e1000_write_kmrn_reg_generic(struct e1000_hw *hw, u32 offset, u16 data);
s32 e1000_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data);
s32 e1000_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data);
s32 e1000_phy_reset_dsp(struct e1000_hw *hw);
s32 e1000_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
u32 usec_interval, bool *success);
s32 e1000_phy_init_script_igp3(struct e1000_hw *hw);
e1000_phy_type e1000_get_phy_type_from_id(u32 phy_id);
s32 e1000_determine_phy_address(struct e1000_hw *hw);
s32 e1000_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data);
s32 e1000_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data);
s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data,
bool read);
s32 e1000_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data);
s32 e1000_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data);
void e1000_power_up_phy_copper(struct e1000_hw *hw);
void e1000_power_down_phy_copper(struct e1000_hw *hw);
s32 e1000_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data);
s32 e1000_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data);
#define E1000_MAX_PHY_ADDR 4
/* IGP01E1000 Specific Registers */
#define IGP01E1000_PHY_PORT_CONFIG 0x10 /* Port Config */
#define IGP01E1000_PHY_PORT_STATUS 0x11 /* Status */
#define IGP01E1000_PHY_PORT_CTRL 0x12 /* Control */
#define IGP01E1000_PHY_LINK_HEALTH 0x13 /* PHY Link Health */
#define IGP01E1000_GMII_FIFO 0x14 /* GMII FIFO */
#define IGP01E1000_PHY_CHANNEL_QUALITY 0x15 /* PHY Channel Quality */
#define IGP02E1000_PHY_POWER_MGMT 0x19 /* Power Management */
#define IGP01E1000_PHY_PAGE_SELECT 0x1F /* Page Select */
#define BM_PHY_PAGE_SELECT 22 /* Page Select for BM */
#define IGP_PAGE_SHIFT 5
#define PHY_REG_MASK 0x1F
#define BM_WUC_PAGE 800
#define BM_WUC_ADDRESS_OPCODE 0x11
#define BM_WUC_DATA_OPCODE 0x12
#define BM_WUC_ENABLE_PAGE 769
#define BM_WUC_ENABLE_REG 17
#define BM_WUC_ENABLE_BIT (1 << 2)
#define BM_WUC_HOST_WU_BIT (1 << 4)
/* BM PHY Copper Specific Control 1 */
#define BM_CS_CTRL1 16
#define BM_CS_CTRL1_ENERGY_DETECT 0x0300 /* Enable Energy Detect */
/* BM PHY Copper Specific States */
#define BM_CS_STATUS 17
#define BM_CS_STATUS_ENERGY_DETECT 0x0010 /* Energy Detect Status */
#define IGP01E1000_PHY_PCS_INIT_REG 0x00B4
#define IGP01E1000_PHY_POLARITY_MASK 0x0078
#define IGP01E1000_PSCR_AUTO_MDIX 0x1000
#define IGP01E1000_PSCR_FORCE_MDI_MDIX 0x2000 /* 0=MDI, 1=MDIX */
#define IGP01E1000_PSCFR_SMART_SPEED 0x0080
/* Enable flexible speed on link-up */
#define IGP01E1000_GMII_FLEX_SPD 0x0010
#define IGP01E1000_GMII_SPD 0x0020 /* Enable SPD */
#define IGP02E1000_PM_SPD 0x0001 /* Smart Power Down */
#define IGP02E1000_PM_D0_LPLU 0x0002 /* For D0a states */
#define IGP02E1000_PM_D3_LPLU 0x0004 /* For all other states */
#define IGP01E1000_PLHR_SS_DOWNGRADE 0x8000
#define IGP01E1000_PSSR_POLARITY_REVERSED 0x0002
#define IGP01E1000_PSSR_MDIX 0x0008
#define IGP01E1000_PSSR_SPEED_MASK 0xC000
#define IGP01E1000_PSSR_SPEED_1000MBPS 0xC000
#define IGP02E1000_PHY_CHANNEL_NUM 4
#define IGP02E1000_PHY_AGC_A 0x11B1
#define IGP02E1000_PHY_AGC_B 0x12B1
#define IGP02E1000_PHY_AGC_C 0x14B1
#define IGP02E1000_PHY_AGC_D 0x18B1
#define IGP02E1000_AGC_LENGTH_SHIFT 9 /* Course - 15:13, Fine - 12:9 */
#define IGP02E1000_AGC_LENGTH_MASK 0x7F
#define IGP02E1000_AGC_RANGE 15
#define IGP03E1000_PHY_MISC_CTRL 0x1B
#define IGP03E1000_PHY_MISC_DUPLEX_MANUAL_SET 0x1000 /* Manually Set Duplex */
#define E1000_CABLE_LENGTH_UNDEFINED 0xFF
#define E1000_KMRNCTRLSTA_OFFSET 0x001F0000
#define E1000_KMRNCTRLSTA_OFFSET_SHIFT 16
#define E1000_KMRNCTRLSTA_REN 0x00200000
#define E1000_KMRNCTRLSTA_DIAG_OFFSET 0x3 /* Kumeran Diagnostic */
#define E1000_KMRNCTRLSTA_DIAG_NELPBK 0x1000 /* Nearend Loopback mode */
#define IFE_PHY_EXTENDED_STATUS_CONTROL 0x10
#define IFE_PHY_SPECIAL_CONTROL 0x11 /* 100BaseTx PHY Special Control */
#define IFE_PHY_SPECIAL_CONTROL_LED 0x1B /* PHY Special and LED Control */
#define IFE_PHY_MDIX_CONTROL 0x1C /* MDI/MDI-X Control */
/* IFE PHY Extended Status Control */
#define IFE_PESC_POLARITY_REVERSED 0x0100
/* IFE PHY Special Control */
#define IFE_PSC_AUTO_POLARITY_DISABLE 0x0010
#define IFE_PSC_FORCE_POLARITY 0x0020
#define IFE_PSC_DISABLE_DYNAMIC_POWER_DOWN 0x0100
/* IFE PHY Special Control and LED Control */
#define IFE_PSCL_PROBE_MODE 0x0020
#define IFE_PSCL_PROBE_LEDS_OFF 0x0006 /* Force LEDs 0 and 2 off */
#define IFE_PSCL_PROBE_LEDS_ON 0x0007 /* Force LEDs 0 and 2 on */
/* IFE PHY MDIX Control */
#define IFE_PMC_MDIX_STATUS 0x0020 /* 1=MDI-X, 0=MDI */
#define IFE_PMC_FORCE_MDIX 0x0040 /* 1=force MDI-X, 0=force MDI */
#define IFE_PMC_AUTO_MDIX 0x0080 /* 1=enable auto MDI/MDI-X, 0=disable */
#ifdef __cplusplus
}
#endif
#endif /* _E1000_PHY_H_ */