#
# CDDL HEADER START
#
# The contents of this file are subject to the terms of the
# Common Development and Distribution License (the "License").
# You may not use this file except in compliance with the License.
#
# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
# or http://www.opensolaris.org/os/licensing.
# See the License for the specific language governing permissions
# and limitations under the License.
#
# When distributing Covered Code, include this CDDL HEADER in each
# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
# If applicable, add the following below this CDDL HEADER, with the
# fields enclosed by brackets "[]" replaced with your own identifying
# information: Portions Copyright [yyyy] [name of copyright owner]
#
# CDDL HEADER END
#
# Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
# Copyright 2015 Nexenta Systems, Inc. All rights reserved.
# Copyright 2012 Joshua M. Clulow <josh@sysmgr.org>
# Copyright 2015, OmniTI Computer Consulting, Inc. All rights reserved.
#
# Configuration variables for the runtime environment of the nightly
# build script and other tools for construction and packaging of
# releases.
# This example is suitable for building an illumos workspace, which
# will contain the resulting archives. It is based off the onnv
# release. It sets NIGHTLY_OPTIONS to make nightly do:
# DEBUG build only (-D, -F)
# do not bringover from the parent (-n)
# runs 'make check' (-C)
# checks for new interfaces in libraries (-A)
# runs lint in usr/src (-l plus the LINTDIRS variable)
# sends mail on completion (-m and the MAILTO variable)
# creates packages for PIT/RE (-p)
# checks for changes in ELF runpaths (-r)
# build and use this workspace's tools in $SRC/tools (-t)
#
# - This file is sourced by "bldenv.sh" and "nightly.sh" and should not
# be executed directly.
# - This script is only interpreted by ksh93 and explicitly allows the
# use of ksh93 language extensions.
#
export NIGHTLY_OPTIONS='-FnCDAlmprt'
# CODEMGR_WS - where is your workspace at
#export CODEMGR_WS="$HOME/ws/illumos-gate"
export CODEMGR_WS="`git rev-parse --show-toplevel`"
# Maximum number of dmake jobs. The recommended number is 2 + NCPUS,
# where NCPUS is the number of logical CPUs on your build system.
function maxjobs
{
nameref maxjobs=$1
integer ncpu
integer -r min_mem_per_job=512 # minimum amount of memory for a job
ncpu=$(builtin getconf ; getconf 'NPROCESSORS_ONLN')
(( maxjobs=ncpu + 2 ))
# Throttle number of parallel jobs launched by dmake to a value which
# gurantees that all jobs have enough memory. This was added to avoid
# excessive paging/swapping in cases of virtual machine installations
# which have lots of CPUs but not enough memory assigned to handle
# that many parallel jobs
if [[ $(/usr/sbin/prtconf 2>'/dev/null') == ~(E)Memory\ size:\ ([[:digit:]]+)\ Megabytes ]] ; then
integer max_jobs_per_memory # parallel jobs which fit into physical memory
integer physical_memory # physical memory installed
# The array ".sh.match" contains the contents of capturing
# brackets in the last regex, .sh.match[1] will contain
# the value matched by ([[:digit:]]+), i.e. the amount of
# memory installed
physical_memory="10#${.sh.match[1]}"
((
max_jobs_per_memory=round(physical_memory/min_mem_per_job) ,
maxjobs=fmax(2, fmin(maxjobs, max_jobs_per_memory))
))
fi
return 0
}
maxjobs DMAKE_MAX_JOBS # "DMAKE_MAX_JOBS" passed as ksh(1) name reference
export DMAKE_MAX_JOBS
# path to onbld tool binaries
ONBLD_BIN='/opt/onbld/bin'
# PARENT_WS is used to determine the parent of this workspace. This is
# for the options that deal with the parent workspace (such as where the
# proto area will go).
export PARENT_WS=''
# CLONE_WS is the workspace nightly should do a bringover from.
export CLONE_WS='ssh://anonhg@hg.illumos.org/illumos-gate'
# The bringover, if any, is done as STAFFER.
# Set STAFFER to your own login as gatekeeper or developer
# The point is to use group "staff" and avoid referencing the parent
# workspace as root.
# Some scripts optionally send mail messages to MAILTO.
#
export STAFFER="$LOGNAME"
export MAILTO="$STAFFER"
# If you wish the mail messages to be From: an arbitrary address, export
# MAILFROM.
#export MAILFROM="user@example.com"
# The project (see project(4)) under which to run this build. If not
# specified, the build is simply run in a new task in the current project.
export BUILD_PROJECT=''
# You should not need to change the next three lines
export ATLOG="$CODEMGR_WS/log"
export LOGFILE="$ATLOG/nightly.log"
export MACH="$(uname -p)"
#
# The following macro points to the closed binaries. Once illumos has
# totally freed itself, we can remove this reference.
#
# Location of encumbered binaries.
export ON_CLOSED_BINS="$CODEMGR_WS/closed"
# REF_PROTO_LIST - for comparing the list of stuff in your proto area
# with. Generally this should be left alone, since you want to see differences
# from your parent (the gate).
#
export REF_PROTO_LIST="$PARENT_WS/usr/src/proto_list_${MACH}"
export ROOT="$CODEMGR_WS/proto/root_${MACH}"
export SRC="$CODEMGR_WS/usr/src"
export MULTI_PROTO="no"
#
# build environment variables, including version info for mcs, motd,
# motd, uname and boot messages. Mostly you shouldn't change this except
# when the release slips (nah) or you move an environment file to a new
# release
#
export VERSION="`git describe --long --all HEAD | cut -d/ -f2-`"
#
# the RELEASE and RELEASE_DATE variables are set in Makefile.master;
# there might be special reasons to override them here, but that
# should not be the case in general
#
# export RELEASE='5.11'
# export RELEASE_DATE='October 2007'
# proto area in parent for optionally depositing a copy of headers and
# libraries corresponding to the protolibs target
# not applicable given the NIGHTLY_OPTIONS
#
export PARENT_ROOT="$PARENT_WS/proto/root_$MACH"
export PARENT_TOOLS_ROOT="$PARENT_WS/usr/src/tools/proto/root_$MACH-nd"
# Package creation variables. You probably shouldn't change these,
# either.
#
# PKGARCHIVE determines where the repository will be created.
#
# PKGPUBLISHER_REDIST controls the publisher setting for the repository.
#
export PKGARCHIVE="${CODEMGR_WS}/packages/${MACH}/nightly"
# export PKGPUBLISHER_REDIST='on-redist'
# Package manifest format version.
export PKGFMT_OUTPUT='v1'
# we want make to do as much as it can, just in case there's more than
# one problem.
export MAKEFLAGS='k'
# Magic variables to prevent the devpro compilers/teamware from checking
# for updates or sending mail back to devpro on every use.
export SUNW_NO_UPDATE_NOTIFY='1'
export UT_NO_USAGE_TRACKING='1'
# Build tools - don't change these unless you know what you're doing. These
# variables allows you to get the compilers and onbld files locally.
# Set BUILD_TOOLS to pull everything from one location.
# Alternately, you can set ONBLD_TOOLS to where you keep the contents of
# SUNWonbld and SPRO_ROOT to where you keep the compilers. SPRO_VROOT
# exists to make it easier to test new versions of the compiler.
export BUILD_TOOLS='/opt'
#export ONBLD_TOOLS='/opt/onbld'
export SPRO_ROOT='/opt/SUNWspro'
export SPRO_VROOT="$SPRO_ROOT"
# Disable shadow compilation by default.
export CW_NO_SHADOW='1'
# This goes along with lint - it is a series of the form "A [y|n]" which
# means "go to directory A and run 'make lint'" Then mail me (y) the
# difference in the lint output. 'y' should only be used if the area you're
# linting is actually lint clean or you'll get lots of mail.
# You shouldn't need to change this though.
#export LINTDIRS="$SRC y"
# Set this flag to 'n' to disable the use of 'checkpaths'. The default,
# if the 'N' option is not specified, is to run this test.
#CHECK_PATHS='y'
# POST_NIGHTLY can be any command to be run at the end of nightly. See
# nightly(1) for interactions between environment variables and this command.
#POST_NIGHTLY=
# Comment this out to disable support for IPP printing, i.e. if you
# don't want to bother providing the Apache headers this needs.
export ENABLE_IPP_PRINTING=
# Comment this out to disable support for SMB printing, i.e. if you
# don't want to bother providing the CUPS headers this needs.
export ENABLE_SMB_PRINTING=
# If your distro uses certain versions of Perl, make sure either Makefile.master
# contains your new defaults OR your .env file sets them.
# These are how you would override for building on OmniOS r151012, for example.
#export PERL_VERSION=5.16.1
#export PERL_ARCH=i86pc-solaris-thread-multi-64int
#export PERL_PKGVERS=-5161