######## TERMINAL TYPE DESCRIPTIONS SOURCE FILE
#
# This version of terminfo.src is distributed with ncurses and is maintained
# by Thomas E. Dickey (TD).
#
# Report bugs and new terminal descriptions to
# bug-ncurses@gnu.org
#
# $Revision: 1.162 $
# $Date: 2011/08/20 20:52:51 $
#
# The original header is preserved below for reference. It is noted that there
# is a "newer" version which differs in some cosmetic details (but actually
# stopped updates several years ago); we have decided to not change the header
# unless there is also a change in content.
#
# To further muddy the waters, it is noted that changes to this file as part of
# maintenance of ncurses (since 1996) are generally conceded to be copyright
# under the ncurses MIT-style license. That was the effect of the agreement
# which the principal authors of ncurses made in 1998. However, since much of
# the file itself is of unknown authorship (and the disclaimer below makes it
# obvious that Raymond cannot or will not convey rights over those parts),
# there is no explicit copyright notice on the file itself.
#
# It would also be a nuisance to split the file into unknown/known authorship
# and move pieces as they are maintained, since many of the maintenance changes
# have been small corrections to Raymond's translations to/from termcap format,
# correcting the data but not the accompanying annotations.
#
# In any case, note that almost half of this file is not data but annotations
# which reflect creative effort. Furthermore, the structure of entries to
# reuse common chunks also is creative (and subject to copyright). Finally,
# some portions of the data are derivative work under a compatible MIT-style
# license from xterm.
#
#------------------------------------------------------------------------------
# Version 10.2.1
# terminfo syntax
#
# Eric S. Raymond (current maintainer)
# John Kunze, Berkeley
# Craig Leres, Berkeley
#
# Please e-mail changes to terminfo@thyrsus.com; the old termcap@berkeley.edu
# address is no longer valid. The latest version can always be found at
# <http://www.tuxedo.org/terminfo>.
#
# PURPOSE OF THIS FILE:
#
# This file describes the capabilities of various character-cell terminals,
# as needed by software such as screen-oriented editors.
#
# Other terminfo and termcap files exist, supported by various OS vendors
# or as relics of various older versions of UNIX. This one is the longest
# and most comprehensive one in existence. It subsumes not only the entirety
# of the historical 4.4BSD, GNU, System V and SCO termcap files and the BRL
# termcap file, but also large numbers of vendor-maintained termcap and
# terminfo entries more complete and carefully tested than those in historical
# termcap/terminfo versions.
#
# Pointers to related resources (including the ncurses distribution) may
# be found at <http://www.tuxedo.org/terminfo>.
#
# INTERNATIONALIZATION:
#
# This file uses only the US-ASCII character set (no ISO8859 characters).
#
# This file assumes a US-ASCII character set. If you need to fix this, start
# by global-replacing \E(B and \E)B with the appropriate ISO 6429 enablers
# for your character set. \E(A and \E)A enables the British character set
# with the pound sign at position 2/3.
#
# In a Japanese-processing environment using EUC/Japanese or Shift-JIS,
# C1 characters are considered the first-byte set of the Japanese encodings,
# so \E)0 should be avoided in <enacs> and initialization strings.
#
# FILE FORMAT:
#
# The version you are looking at may be in any of three formats: master
# (terminfo with OT capabilities), stock terminfo, or termcap. You can tell
# which by the format given in the header above.
#
# The master format is accepted and generated by the terminfo tools in the
# ncurses suite; it differs from stock (System V-compatible) terminfo only
# in that it admits a group of capabilities (prefixed `OT') equivalent to
# various obsolete termcap capabilities. You can, thus, convert from master
# to stock terminfo simply by filtering with `sed "/OT[^,]*,/s///"'; but if
# you have ncurses `tic -I' is nicer (among other things, it automatically
# outputs entries in a canonical form).
#
# The termcap version is generated automatically from the master version
# using tic -C. This filtering leaves in the OT capabilities under their
# original termcap names. All translated entries fit within the 1023-byte
# string-table limit of archaic termcap libraries except where explicitly
# noted below. Note that the termcap translation assumes that your termcap
# library can handle multiple tc capabilities in an entry. 4.4BSD has this
# capability. Older versions of GNU termcap, through 1.3, do not.
#
# For details on these formats, see terminfo(5) in the ncurses distribution,
# and termcap(5) in the 4.4BSD Unix Programmer's Manual. Be aware that 4.4BSD
# curses has been declared obsolete by the caretakers of the 4.4BSD sources
# as of June 1995; they are encouraging everyone to migrate to ncurses.
#
# Note: unlike some other distributed terminfo files (Novell Unix & SCO's),
# no entry in this file has embedded comments. This is so source translation
# to termcap only has to carry over leading comments. Also, no name field
# contains embedded whitespace (such whitespace confuses rdist).
#
# Further note: older versions of this file were often installed with an editor
# script (reorder) that moved the most common terminal types to the front of
# the file. This should no longer be necessary, as the file is now ordered
# roughly by type frequency with ANSI/VT100 and other common types up front.
#
# Some information has been merged in from terminfo files distributed by
# USL and SCO (see COPYRIGHTS AND OTHER DELUSIONS below). Much information
# comes from vendors who maintain official terminfos for their hardware
# (notably DEC and Wyse).
#
# A detailed change history is included at the end of this file.
#
# FILE ORGANIZATION:
#
# Comments in this file begin with # - they cannot appear in the middle
# of a terminfo/termcap entry (this feature had to be sacrificed in order
# to allow standard terminfo and termcap syntax to be generated cleanly from
# the master format). Individual capabilities are commented out by
# placing a period between the colon and the capability name.
#
# The file is divided up into major sections (headed by lines beginning with
# the string "########") and minor sections (beginning with "####"); do
#
# grep "^####" <file> | more
#
# to see a listing of section headings. The intent of the divisions is
# (a) to make it easier to find things, and (b) to order the database so
# that important and frequently-encountered terminal types are near the
# front (so that you'll get reasonable search efficiency from a linear
# search of the termcap form even if you don't use reorder). Minor sections
# usually correspond to manufacturers or standard terminal classes.
# Parenthesized words following manufacturer names are type prefixes or
# product line names used by that manufacturers.
#
# HOW TO READ THE ENTRIES:
#
# The first name in an entry is the canonical name for the model or
# type, last entry is a verbose description. Others are mnemonic synonyms for
# the terminal.
#
# Terminal names look like <manufacturer> <model> - <modes/options>
# The part to the left of the dash, if a dash is present, describes the
# particular hardware of the terminal. The part to the right may be used
# for flags indicating special ROMs, extra memory, particular terminal modes,
# or user preferences.
#
# All names should be in lower case, for consistency in typing.
#
# The following are conventionally used suffixes:
# -2p Has two pages of memory. Likewise 4p, 8p, etc.
# -am Enable auto-margin.
# -m Monochrome. Suppress color support
# -mc Magic-cookie. Some terminals (notably older Wyses) can
# only support one attribute without magic-cookie lossage.
# Their base entry is usually paired with another that
# uses magic cookies to support multiple attributes.
# -nam No auto-margin - suppress :am: capability
# -nl No labels - suppress soft labels
# -ns No status line - suppress status line
# -rv Terminal in reverse video mode (black on white)
# -s Enable status line.
# -vb Use visible bell (:vb:) rather than :bl:.
# -w Wide - in 132 column mode.
# If a name has multiple suffixes and one is a line height, that one should
# go first. Thus `aaa-30-s-rv' is recommended over `aaa-s-rv-30'.
#
# Entries with embedded plus signs are designed to be included through use/tc
# capabilities, not used as standalone entries.
#
# To avoid search clashes, some older all-numeric names for terminals have
# been removed (i.e., "33" for the Model 33 Teletype, "2621" for the HP2621).
# All primary names of terminals now have alphanumeric prefixes.
#
# Comments marked "esr" are mostly results of applying the termcap-compiler
# code packaged with ncurses and contemplating the resulting error messages.
# In many cases, these indicated obvious fixes to syntax garbled by the
# composers. In a few cases, I was able to deduce corrected forms for garbled
# capabilities by looking at context. All the information in the original
# entries is preserved in the comments.
#
# In the comments, terminfo capability names are bracketed with <> (angle
# brackets). Termcap capability names are bracketed with :: (colons).
#
# INTERPRETATION OF USER CAPABILITIES
#
# The System V Release 4 and XPG4 terminfo format defines ten string
# capabilities for use by applications, <u0>...<u9>. In this file, we use
# certain of these capabilities to describe functions which are not covered
# by terminfo. The mapping is as follows:
#
# u9 terminal enquire string (equiv. to ANSI/ECMA-48 DA)
# u8 terminal answerback description
# u7 cursor position request (equiv. to VT100/ANSI/ECMA-48 DSR 6)
# u6 cursor position report (equiv. to ANSI/ECMA-48 CPR)
#
# The terminal enquire string <u9> should elicit an answerback response
# from the terminal. Common values for <u9> will be ^E (on older ASCII
# terminals) or \E[c (on newer VT100/ANSI/ECMA-48-compatible terminals).
#
# The cursor position request (<u7>) string should elicit a cursor position
# report. A typical value (for VT100 terminals) is \E[6n.
#
# The terminal answerback description (u8) must consist of an expected
# answerback string. The string may contain the following scanf(3)-like
# escapes:
#
# %c Accept any character
# %[...] Accept any number of characters in the given set
#
# The cursor position report (<u6>) string must contain two scanf(3)-style
# %d format elements. The first of these must correspond to the Y coordinate
# and the second to the %d. If the string contains the sequence %i, it is
# taken as an instruction to decrement each value after reading it (this is
# the inverse sense from the cup string). The typical CPR value is
# \E[%i%d;%dR (on VT100/ANSI/ECMA-48-compatible terminals).
#
# These capabilities are used by tack(1m), the terminfo action checker
# (distributed with ncurses 5.0).
#
# TABSET FILES
#
# All the entries in this file have been edited to assume that the tabset
# files directory is /usr/share/tabset, in conformance with the File Hierarchy
# Standard for Linux and open-source BSD systems. Some vendors (notably Sun)
# use /usr/lib/tabset or (more recently) /usr/share/lib/tabset.
#
# No curses package we know of actually uses these files. If their location
# is an issue, you will have to hand-patch the file locations before compiling
# this file.
#
# REQUEST FOR CONTACT INFORMATION AND HISTORICAL MATERIAL
#
# As the ANSI/ECMA-48 standard and variants take firmer hold, and as
# character-cell terminals are increasingly replaced by X displays, much of
# this file is becoming a historical document (this is part of the reason for
# the new organization, which puts ANSI types, xterm, Unix consoles,
# and vt100 up front in confidence that this will catch 95% of new hardware).
#
# For the terminal types still alive, I'd like to have manufacturer's
# contact data (Internet address and/or snail-mail + phone).
#
# I'm also interested in enriching the comments so that the latter portions of
# the file do in fact become a potted history of VDT technology as seen by
# UNIX hackers. Ideally, I'd like the headers for each manufacturer to
# include its live/dead/out-of-the-business status, and for as many
# terminal types as possible to be tagged with information like years
# of heaviest use, popularity, and interesting features.
#
# I'm especially interested in identifying the obscure entries listed under
# `Miscellaneous obsolete terminals, manufacturers unknown' before the tribal
# wisdom about them gets lost. If you know a lot about obscure old terminals,
# please go to the terminfo resource page, grab the UFO file (ufo.ti), and
# eyeball it for things you can identify and describe.
#
# If you have been around long enough to contribute, please read the file
# with this in mind and send me your annotations.
#
# COPYRIGHTS AND OTHER DELUSIONS
#
# The BSD ancestor of this file had a standard Regents of the University of
# California copyright with dates from 1980 to 1993.
#
# Some information has been merged in from a terminfo file SCO distributes.
# It has an obnoxious boilerplate copyright which I'm ignoring because they
# took so much of the content from the ancestral BSD versions of this file
# and didn't attribute it, thereby violating the BSD Regents' copyright.
#
# Not that anyone should care. However many valid functions copyrights may
# serve, putting one on a termcap/terminfo file with hundreds of anonymous
# contributors makes about as much sense as copyrighting a wall-full of
# graffiti -- it's legally dubious, ethically bogus, and patently ridiculous.
#
# This file deliberately has no copyright. It belongs to no one and everyone.
# If you claim you own it, you will merely succeed in looking like a fool.
# Use it as you like. Use it at your own risk. Copy and redistribute freely.
# There are no guarantees anywhere. Svaha!
#
######## ANSI, UNIX CONSOLE, AND SPECIAL TYPES
#
# This section describes terminal classes and brands that are still
# quite common.
#
#### Specials
#
# Special "terminals". These are used to label tty lines when you don't
# know what kind of terminal is on it. The characteristics of an unknown
# terminal are the lowest common denominator - they look about like a ti 700.
#
dumb|80-column dumb tty:\
:am:\
:co#80:\
:bl=^G:cr=^M:do=^J:sf=^J:
unknown|unknown terminal type:\
:gn:tc=dumb:
lpr|printer|line printer:\
:bs:hc:os:\
:co#132:li#66:\
:bl=^G:cr=^M:do=^J:ff=^L:le=^H:sf=^J:
glasstty|classic glass tty interpreting ASCII control characters:\
:am:bs:\
:co#80:\
:bl=^G:cl=^L:cr=^M:do=^J:kd=^J:kl=^H:le=^H:nw=^M^J:ta=^I:
vanilla|dumb tty:\
:bs:\
:bl=^G:cr=^M:do=^J:sf=^J:
# This is almost the same as "dumb", but with no prespecified width.
# DEL and ^C are hardcoded to act as kill characters.
# ^D acts as a line break (just like newline).
# It also interprets
# \033];xxx\007
# for compatibility with xterm -TD
9term|Plan9 terminal emulator for X:\
:am:\
:bl=^G:do=^J:nl=^J:
#### ANSI.SYS/ISO 6429/ECMA-48 Capabilities
#
# See the end-of-file comment for more on these.
#
# ANSI capabilities are broken up into pieces, so that a terminal
# implementing some ANSI subset can use many of them.
ansi+local1:\
:do=\E[B:le=\E[D:nd=\E[C:up=\E[A:
ansi+local:\
:DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:tc=ansi+local1:
ansi+tabs:\
:bt=\E[Z:ct=\E[3g:st=\EH:ta=^I:
ansi+inittabs:\
:it#8:tc=ansi+tabs:
ansi+erase:\
:cd=\E[J:ce=\E[K:cl=\E[H\E[J:
ansi+rca:\
:ch=\E[%+^AG:cv=\E[%+^Ad:
ansi+cup:\
:cm=\E[%i%d;%dH:ho=\E[H:
ansi+rep:
ansi+idl1:\
:al=\E[L:dl=\E[M:
ansi+idl:\
:AL=\E[%dL:DL=\E[%dM:tc=ansi+idl1:
ansi+idc:\
:IC=\E[%d@:dc=\E[P:ei=\E6:ic=\E[@:im=\E6:
ansi+arrows:\
:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:
ansi+sgr|ansi graphic renditions:\
:mb=\E[5m:me=\E[0m:mk=\E[8m:mr=\E[7m:
ansi+sgrso|ansi standout only:\
:se=\E[m:so=\E[7m:
ansi+sgrul|ansi underline only:\
:ue=\E[m:us=\E[4m:
ansi+sgrbold|ansi graphic renditions; assuming terminal has bold; not dim:\
:md=\E[1m:tc=ansi+sgr:tc=ansi+sgrso:tc=ansi+sgrul:
ansi+sgrdim|ansi graphic renditions; assuming terminal has dim; not bold:\
:mh=\E[2m:tc=ansi+sgr:tc=ansi+sgrso:tc=ansi+sgrul:
ansi+pp|ansi printer port:\
:pf=\E[4i:po=\E[5i:ps=\E[0i:
ansi+csr|ansi scroll-region plus cursor save & restore:\
:cs=\E[%i%d;%dr:rc=\E8:sc=\E7:
# The IBM PC alternate character set. Plug this into any Intel console entry.
# We use \E[11m for rmacs rather than \E[12m so the <acsc> string can use the
# ROM graphics for control characters such as the diamond, up- and down-arrow.
# This works with the System V, Linux, and BSDI consoles. It's a safe bet this
# will work with any Intel console, they all seem to have inherited \E[11m
# from the ANSI.SYS de-facto standard.
klone+acs|alternate character set for ansi.sys displays:\
:ac=+\020,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376:\
:ae=\E[10m:as=\E[11m:
# Highlight controls corresponding to the ANSI.SYS standard. Most
# console drivers for Intel boxes obey these. Makes the same assumption
# about \E[11m as klone+acs. True ANSI/ECMA-48 would have :se=\E[27m:,
# :ue=\E[24m:, but this isn't a documented feature of ANSI.SYS.
klone+sgr|attribute control for ansi.sys displays:\
:S2=\E[11m:S3=\E[10m:mb=\E[5m:md=\E[1m:me=\E[0m:mr=\E[7m:\
:se=\E[m:so=\E[7m:ue=\E[m:us=\E[4m:tc=klone+acs:
# Most Intel boxes do not treat "invis" (invisible) text.
klone+sgr8|attribute control for ansi.sys displays:\
:mk=\E[8m:tc=klone+sgr:
# Highlight controls corresponding to the ANSI.SYS standard. *All*
# console drivers for Intel boxes obey these. Does not assume \E[11m will
# work; uses \E[12m instead, which is pretty bulletproof but loses you the ACS
# diamond and arrow characters under curses.
klone+sgr-dumb|attribute control for ansi.sys displays (no ESC [ 11 m):\
:as=\E[12m:mb=\E[5m:md=\E[1m:me=\E[0m:mk=\E[8m:mr=\E[7m:\
:se=\E[m:so=\E[7m:ue=\E[m:us=\E[4m:tc=klone+acs:
# KOI8-R (RFC1489) acs (alternate character set)
# From: Qing Long <qinglong@Bolizm.ihep.su>, 24 Feb 1996.
klone+koi8acs|alternate character set for ansi.sys displays with KOI8 charset:\
:ac=+\020,\021-\036.^_0\215`\004a\237f\234g\232h\222i\220j\205k\203l\202m\204n\212o\213p\216q\200r\217s\214t\206u\207v\210w\211x\201y\230z\231{\267|\274}L~\225:\
:ae=\E[10m:as=\E[11m:
# ANSI.SYS color control. The setab/setaf caps depend on the coincidence
# between SVr4/XPG4's color numbers and ANSI.SYS attributes. Here are longer
# but equivalent strings that don't rely on that coincidence:
# setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
# setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
# The DOS 5 manual asserts that these sequences meet the ISO 6429 standard.
# They match a subset of ECMA-48.
klone+color|color control for ansi.sys and ISO6429-compatible displays:\
:Co#8:NC#3:pa#64:\
:AB=\E[4%dm:AF=\E[3%dm:op=\E[37;40m:
# This is better than klone+color, it doesn't assume white-on-black as the
# default color pair, but many `ANSI' terminals don't grok the <op> cap.
ecma+color|color control for ECMA-48-compatible terminals:\
:AX:\
:Co#8:NC#3:pa#64:\
:AB=\E[4%dm:AF=\E[3%dm:op=\E[39;49m:
# Attribute control for ECMA-48-compatible terminals
ecma+sgr|attribute capabilities for true ECMA-48 terminals:\
:se=\E[27m:ue=\E[24m:tc=klone+sgr8:
# For comparison, here are all the capabilities implied by the Intel
# Binary Compatibility Standard (level 2) that fit within terminfo.
# For more detail on this rather pathetic standard, see the comments
# near the end of this file.
ibcs2|Intel Binary Compatibility Standard prescriptions:\
:AL=\E[%dL:DC=\E[%dP:DO=\E[%dB:IC=\E[%d@:LE=\E[%dD:\
:RA=\E[?7l:RI=\E[%dC:S1=\E=%dg:SA=\E[?7h:SF=\E[%dS:\
:SR=\E[%dT:UP=\E[%dA:bt=\E[Z:ch=\E[%i%dG:cl=\Ec:\
:cm=\E[%i%d;%dH:ct=\E[g:cv=\E[%i%dd:do=\E[1B:ec=\E[%dX:\
:ei=:im=:le=\E[1D:nd=\E[1C:rc=\E7:sc=\E7:st=\EH:up=\E[1A:
#### ANSI/ECMA-48 terminals and terminal emulators
#
# See near the end of this file for details on ANSI conformance.
# Don't mess with these entries! Lots of other entries depend on them!
#
# This section lists entries in a least-capable to most-capable order.
# if you're in doubt about what `ANSI' matches yours, try them in that
# order and back off from the first that breaks.
# ansi-mr is for ANSI terminals with ONLY relative cursor addressing
# and more than one page of memory. It uses local motions instead of
# direct cursor addressing, and makes almost no assumptions. It does
# assume auto margins, no padding and/or xon/xoff, and a 24x80 screen.
ansi-mr|mem rel cup ansi:\
:am:xo:\
:co#80:li#24:tc=vanilla:tc=ansi+erase:tc=ansi+local1:
# ansi-mini is a bare minimum ANSI terminal. This should work on anything, but
# beware of screen size problems and memory relative cursor addressing.
ansi-mini|any ansi terminal with pessimistic assumptions:\
:am:xo:\
:co#80:li#24:tc=vanilla:tc=ansi+cup:tc=ansi+erase:
# ansi-mtabs adds relative addressing and minimal tab support
ansi-mtabs|any ansi terminal with pessimistic assumptions:\
:it#8:\
:ta=^I:tc=ansi+local1:tc=ansi-mini:
# ANSI X3.64 from emory!mlhhh (Hugh Hansard) via BRL
#
# The following is an entry for the full ANSI 3.64 (1977). It lacks
# padding, but most terminals using the standard are "fast" enough
# not to require any -- even at 9600 bps. If you encounter problems,
# try including the padding specifications.
#
# Note: the :as: and :ae: specifications are not implemented here, for
# the available termcap documentation does not make clear WHICH alternate
# character set to specify. ANSI 3.64 seems to make allowances for several.
# Please make the appropriate adjustments to fit your needs -- that is
# if you will be using alternate character sets.
#
# There are very few terminals running the full ANSI 3.64 standard,
# so I could only test this entry on one verified terminal (Visual 102).
# I would appreciate the results on other terminals sent to me.
#
# Please report comments, changes, and problems to:
#
# U.S. MAIL: Hugh Hansard
# Box: 22830
# Emory University
# Atlanta, GA. 30322.
#
# USENET {akgua,msdc,sb1,sb6,gatech}!emory!mlhhh.
#
# (Added vt100 :rc:,:sc: to quiet a tic warning --esr)
ansi77|ansi 3.64 standard 1977 version:\
:am:bs:mi:\
:co#80:it#8:li#24:\
:al=5*\E[L:bl=^G:cd=\E[J:ce=\E[K:cl=\E[;H\E[2J:\
:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:dc=\E[P:dl=5*\E[M:\
:do=\E[B:ei=\E[4l:ho=\E[H:im=\E[4h:k1=\EOP:k2=\EOR:k4=\EOS:\
:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:\
:nd=\E[C:nw=^M\ED:rc=\E8:sc=\E7:se=\E[m:sf=\ED:so=\E[7m:\
:sr=\EM:ta=^I:ue=\E[m:up=\E[A:us=\E[4m:
# Procomm and some other ANSI emulations don't recognize all of the ANSI-
# standard capabilities. This entry deletes :UP:, :RI:, :DO:, :LE:, and
# <vpa>/<hpa> capabilities, forcing curses to use repetitions of :up:,
# :nd:, :do: and :le:. Also deleted :IC: and :ic:, as QModem up to
# 5.03 doesn't recognize these. Finally, we delete :rp: and :sr:, which seem
# to confuse many emulators. On the other hand, we can count on these programs
# doing :ae:/:as:/:sa:. Older versions of this entry featured
# <invis=\E[9m>, but <invis=\E[8m> now seems to be more common under
# ANSI.SYS influence.
# From: Eric S. Raymond <esr@snark.thyrsus.com> Oct 30 1995
pcansi-m|pcansi-mono|ibm-pc terminal programs claiming to be ansi (mono mode):\
:am:bs:mi:ms:\
:co#80:it#8:li#24:\
:al=\E[L:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\
:cm=\E[%i%d;%dH:cr=^M:ct=\E[3g:dc=\E[P:dl=\E[M:do=\E[B:\
:ho=\E[H:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:\
:le=\E[D:nd=\E[C:sf=^J:st=\EH:ta=^I:up=\E[A:\
:tc=klone+sgr-dumb:
pcansi-25-m|pcansi25m|ibm-pc terminal programs with 25 lines (mono mode):\
:li#25:tc=pcansi-m:
pcansi-33-m|pcansi33m|ibm-pc terminal programs with 33 lines (mono mode):\
:li#33:tc=pcansi-m:
pcansi-43-m|ansi43m|ibm-pc terminal programs with 43 lines (mono mode):\
:li#43:tc=pcansi-m:
# The color versions. All PC emulators do color...
pcansi|ibm-pc terminal programs claiming to be ansi:\
:tc=klone+color:tc=pcansi-m:
pcansi-25|pcansi25|ibm-pc terminal programs with 25 lines:\
:li#25:tc=pcansi:
pcansi-33|pcansi33|ibm-pc terminal programs with 33 lines:\
:li#33:tc=pcansi:
pcansi-43|pcansi43|ibm-pc terminal programs with 43 lines:\
:li#43:tc=pcansi:
# ansi-m -- full ANSI X3.64 with ANSI.SYS-compatible attributes, no color.
# If you want pound signs rather than dollars, replace `B' with `A'
# in the <s0ds>, <s1ds>, <s2ds>, and <s3ds> capabilities.
# From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
ansi-m|ansi-mono|ANSI X3.64-1979 terminal with ANSI.SYS compatible attributes:\
:5i:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
:LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:\
:cb=\E[1K:ch=\E[%i%dG:ct=\E[3g:cv=\E[%i%dd:ec=\E[%dX:ei=:\
:im=:kB=\E[Z:kI=\E[L:kb=^H:kd=\E[B:kl=\E[D:kr=\E[C:ku=\E[A:\
:nw=\r\E[S:pf=\E[4i:po=\E[5i:s0=\E(B:s1=\E)B:s2=\E*B:\
:s3=\E+B:ta=\E[I:tc=pcansi-m:
ansi+enq|ncurses extension for ANSI ENQ:\
:u6=\E[%i%d;%dR:u7=\E[6n:u9=\E[c:
# ansi -- this terminfo expresses the largest subset of X3.64 that will fit in
# standard terminfo. Assumes ANSI.SYS-compatible attributes and color.
# From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
ansi|ansi/pc-term compatible with color:\
:tc=ansi+enq:tc=ecma+color:tc=klone+sgr8:tc=ansi-m:
# ansi-generic is a vanilla ANSI terminal. This is assumed to implement
# all the normal ANSI stuff with no extensions. It assumes
# insert/delete line/char is there, so it won't work with
# vt100 clones. It assumes video attributes for bold, blink,
# underline, and reverse, which won't matter much if the terminal
# can't do some of those. Padding is assumed to be zero, which
# shouldn't hurt since xon/xoff is assumed.
ansi-generic|generic ansi standard terminal:\
:am:xo:\
:co#80:li#24:tc=vanilla:tc=ansi+csr:tc=ansi+cup:\
:tc=ansi+rca:tc=ansi+erase:tc=ansi+tabs:tc=ansi+local:\
:tc=ansi+idc:tc=ansi+idl:tc=ansi+rep:tc=ansi+sgrbold:\
:tc=ansi+arrows:
#### DOS ANSI.SYS variants
#
# This completely describes the sequences specified in the DOS 2.1 ANSI.SYS
# documentation (except for the keyboard key reassignment feature, which
# doesn't fit the <pfkey> model well). The klone+acs sequences were valid
# though undocumented. The <pfkey> capability is untested but should work for
# keys F1-F10 (%p1 values outside this range will yield unpredictable results).
# From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 7 1995
ansi.sys-old|ANSI.SYS under PC-DOS 2.1:\
:am:bs:mi:ms:xo:\
:co#80:li#25:\
:RA=\E[?7l:SA=\E[?7h:ce=\E[k:cl=\E[2J:cm=\E[%i%d;%dH:\
:do=\E[B:ho=\E[H:is=\E[m\E[?7h:kd=^J:kh=^^:kl=^H:kr=^L:\
:ku=^K:le=^H:nd=\E[C:rc=\E[u:sc=\E[s:u6=\E[%i%d;%dR:\
:u7=\E[6n:up=\E[A:tc=klone+color:tc=klone+sgr8:
# Keypad: Home=\0G Up=\0H PrPag=\0I
# ka1,kh kcuu1 kpp,ka3
#
# Left=\0K 5=\0L Right=\0M
# kcub1 kb2 kcuf1
#
# End=\0O Down=\0P NxPag=\0Q
# kc1,kend kcud1 kc3,knp
#
# Ins=\0R Del=\0S
# kich1 kdch1
#
# On keyboard with 12 function keys,
# shifted f-keys: F13-F24
# control f-keys: F25-F36
# alt f-keys: F37-F48
# The shift/control/alt keys do not modify each other, but alt overrides both,
# and control overrides shift.
#
# <pfkey> capability for F1-F48 -TD
ansi.sys|ANSI.SYS 3.1 and later versions:\
:@7=\200O:F1=\200\205:F2=\200\206:F3=\200T:F4=\200U:\
:F5=\200V:F6=\200W:F7=\200X:F8=\200Y:F9=\200Z:FA=\200[:\
:FB=\200\\:FC=\200]:FD=\200\207:FE=\200\210:FF=\200\136:\
:FG=\200_:FH=\200`:FI=\200a:FJ=\200b:FK=\200c:FL=\200d:\
:FM=\200e:FN=\200f:FO=\200g:FP=\200\211:FQ=\200\212:\
:FR=\200h:FS=\200i:FT=\200j:FU=\200k:FV=\200l:FW=\200m:\
:FX=\200n:FY=\200o:FZ=\200p:Fa=\200q:Fb=\200\213:\
:Fc=\200\214:K1=\200G:K2=\200L:K3=\200I:K4=\200O:K5=\200Q:\
:ce=\E[K:k1=\200;:k2=\200<:k3=\200=:k4=\200>:k5=\200?:\
:k6=\200@:k7=\200A:k8=\200B:k9=\200C:k;=\200D:kB=\200^O:\
:kD=\200S:kI=\200R:kN=\200Q:kP=\200I:kb=^H:kd=\200P:\
:kh=\200G:kl=\200K:kr=\200M:ku=\200H:tc=ansi.sys-old:
#
# Define IBM PC keypad keys for vi as per MS-Kermit while using ANSI.SYS.
# This should only be used when the terminal emulator cannot redefine the keys.
# Since redefining keys with ansi.sys also affects PC-DOS programs, the key
# definitions must be restored. If the terminal emulator is quit while in vi
# or others using :ks:/:ke:, the keypad will not be defined as per PC-DOS.
# The PgUp and PgDn are prefixed with ESC so that tn3270 can be used on Unix
# (^U and ^D are already defined for tn3270). The ESC is safe for vi but it
# does "beep". ESC ESC i is used for Ins to avoid tn3270 ESC i for coltab.
# Note that :kl: is always BS, because PC-dos can tolerate this change.
# Caution: vi is limited to 256 string bytes, longer crashes or weirds out vi.
# Consequently the End keypad key could not be set (it is relatively safe and
# actually useful because it sends ^@ O, which beeps and opens a line above).
ansi.sysk|ansisysk|PC-DOS 3.1 ANSI.SYS with keypad redefined for vi:\
:is=U2 PC-DOS 3.1 ANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p:\
:ke=\E[;71;0;71p\E[;72;0;72p\E[;73;0;73p\E[;77;0;77p\E[;80;0;80p\E[;81;0;81p\E[;82;0;82p\E[;83;0;83p:\
:ks=\E[;71;30p\E[;72;11p\E[;73;27;21p\E[;77;12p\E[;80;10p\E[;81;27;4p\E[;82;27;27;105p\E[;83;127p:\
:tc=ansi.sys:
#
# Adds ins/del line/character, hence vi reverse scrolls/inserts/deletes nicer.
nansi.sys|nansisys|PC-DOS Public Domain NANSI.SYS:\
:al=\E[1L:dc=\E[1P:dl=\E[1M:ei=:ic=\E[1@:im=:\
:is=U3 PC-DOS Public Domain NANSI.SYS 9-23-86\n:\
:tc=ansi.sys:
#
# See ansi.sysk and nansi.sys above.
nansi.sysk|nansisysk|PC-DOS Public Domain NANSI.SYS with keypad redefined for vi:\
:al=\E[1L:dc=\E[1P:dl=\E[1M:ei=:ic=\E[1@:im=:\
:is=U4 PC-DOS Public Domain NANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p:\
:tc=ansi.sysk:
#### ANSI console types
#
# Atari ST terminals.
# From Guido Flohr <gufl0000@stud.uni-sb.de>.
#
tw52|tw52-color|Toswin window manager with color:\
:ut:\
:Co#16:pa#256:\
:oc=\Eb?\Ec0:op=\Eb?\Ec0:tc=tw52-m:
tw52-m|Toswin window manager monochrome:\
:ul:\
:ma#999:\
:dc=\Ea:is=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0:md=\Eya:me=\Ez_:\
:mh=\EyB:mr=\EyP:rs=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0:se=\EzQ:\
:so=\EyQ:ue=\EzH:us=\EyH:tc=at-m:
tt52|Atari TT medium and high resolution:\
:li#30:tc=at-color:
st52-color|at-color|atari-color|atari_st-color|Atari ST with color:\
:ut:\
:Co#16:pa#256:\
:is=\Ev\Eq\Ee\Eb1\Ec0:rs=\Ev\Eq\Ee\Eb1\Ec0:tc=st52:
st52|st52-m|at|at-m|atari|atari-m|atari_st|atarist-m|Atari ST:\
:NP:am:eo:mi:\
:co#80:it#8:li#24:\
:#4=\Ed:%1=\EH:%i=\Ec:&8=\EK:F1=\Ep:F2=\Eq:F3=\Er:F4=\Es:\
:F5=\Et:F6=\Eu:F7=\Ev:F8=\Ew:F9=\Ex:FA=\Ey:al=\EL:bl=^G:\
:cb=\Eo:cd=\EJ:ce=\EK:cl=\EE:cm=\EY%+ %+ :cr=^M:dl=\EM:\
:do=\EB:ho=\EH:is=\Ev\Eq\Ee:k1=\EP:k2=\EQ:k3=\ER:k4=\ES:\
:k5=\ET:k6=\EU:k7=\EV:k8=\EW:k9=\EX:k;=\EY:kD=\177:kI=\EI:\
:kN=\Eb:kP=\Ea:kb=^H:kd=\EB:kh=\EE:kl=\ED:kr=\EC:ku=\EA:\
:le=\ED:me=\Eq:mr=\Ep:nd=\EC:nw=^M^J:rc=\Ek:rs=\Ev\Eq\Ee:\
:sc=\Ej:se=\Eq:sf=^J:so=\Ep:sr=\EI:ta=^I:up=\EA:ve=\Ee:\
:vi=\Ef:
tw100|toswin vt100 window mgr:\
:eo:mi:ms:xo:\
:Co#8:co#80:it#8:li#24:pa#64:vt#3:\
:%1=\EH:&8=\EK:DL=\E[%dM:DO=\E[%dB:F1=\Ep:F2=\Eq:F3=\Er:\
:F4=\Es:F5=\Et:F6=\Eu:F7=\Ev:F8=\Ew:F9=\Ex:FA=\Ey:IC=\E[%d@:\
:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:\
:ac=++,,--..00II``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
:ae=^O:al=\EL:as=^N:bl=^G:cb=\E[1K:cd=\E[J:ce=\E[K:\
:cl=\E[2J\E[H:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
:ct=\E[3g:dc=\Ea:dl=\E[M:do=\EB:ei=\Ei:ho=\E[H:im=\Eh:\
:is=\E<\E)0:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k5=\EOT:\
:k6=\EOU:k7=\EOV:k8=\EOW:k9=\EOX:k;=\EOY:kD=\177:kI=\EI:\
:kN=\Eb:kP=\E\Ea:kb=^H:kd=\EOB:ke=\E[?1l\E>:kh=\E\EE:\
:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:ll=\E[24H:\
:mb=\E[5m:md=\E[1m:me=\E[m:mh=\E[2m:mr=\E[7m:nd=\EC:nw=\EE:\
:oc=\E[30;47m:op=\E[30;47m:\
:r1=\E<\E[20l\E[?3;6;9l\E[r\Eq\E(B\017\E)0\E>:rc=\E8:\
:sc=\E7:se=\E[m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
:te=\E[?7h:ti=\E[?7l:ue=\E[m:up=\EA:us=\E[4m:ve=\Ee:vi=\Ef:
# The entries for stv52 and stv52pc probably need a revision.
stv52|MiNT virtual console:\
:am:ms:\
:co#80:it#8:li#30:\
:%1=\EH:&8=\EK:F1=\Ep:F2=\Eq:F3=\Er:F4=\Es:F5=\Et:F6=\Eu:\
:F7=\Ev:F8=\Ew:F9=\Ex:FA=\Ey:al=\EL:bl=^G:cd=\EJ:ce=\EK:\
:cl=\EE:cm=\EY%+ %+ :cr=^M:dl=\EM:do=\EB:ho=\EH:k1=\EP:\
:k2=\EQ:k3=\ER:k4=\ES:k5=\ET:k6=\EU:k7=\EV:k8=\EW:k9=\EX:\
:k;=\EY:kD=\177:kI=\EI:kN=\Eb:kP=\Ea:kb=^H:kd=\EB:kh=\EE:\
:kl=\ED:kr=\EC:ku=\EA:le=^H:mb=\Er:md=\EyA:me=\Ez_:mh=\Em:\
:mr=\Ep:nd=\EC:nw=2*\r\n:op=\Eb@\EcO:r1=\Ez_\Eb@\EcA:\
:se=\Eq:sf=2*\n:so=\Ep:sr=2*\EI:ta=^I:te=\Ev\E. \Ee\Ez_:\
:ti=\Ev\Ee\Ez_:ue=\EzH:up=\EA:us=\EyH:ve=\E. \Ee:vi=\Ef:\
:vs=\E.":
stv52pc|MiNT virtual console with PC charset:\
:am:ms:\
:co#80:it#8:li#30:\
:%1=\EH:&8=\EK:F1=\Ep:F2=\Eq:F3=\Er:F4=\Es:F5=\Et:F6=\Eu:\
:F7=\Ev:F8=\Ew:F9=\Ex:FA=\Ey:\
:ac=+\257,\256-\136.v0\333I\374`\177a\260f\370g\361h\261j\331k\277l\332m\300n\305o\377p-q\304r-s_t+u+v+w+x\263y\363z\362{\343|\366}\234~\371:\
:al=\EL:bl=^G:cd=\EJ:ce=\EK:cl=\EE:cm=\EY%+ %+ :cr=^M:\
:dl=\EM:do=\EB:ho=\EH:k1=\EP:k2=\EQ:k3=\ER:k4=\ES:k5=\ET:\
:k6=\EU:k7=\EV:k8=\EW:k9=\EX:k;=\EY:kD=\177:kI=\EI:kN=\Eb:\
:kP=\Ea:kb=^H:kd=\EB:kh=\EE:kl=\ED:kr=\EC:ku=\EA:le=^H:\
:mb=\Er:md=\EyA:me=\Ez_:mh=\Em:mr=\Ep:nd=\EC:nw=2*\r\n:\
:r1=\Ez_\Eb@\EcA:se=\Eq:sf=2*\n:so=\Ep:sr=2*\EI:ta=^I:\
:te=\Ev\E. \Ee\Ez_:ti=\Ev\Ee\Ez_:ue=\EzH:up=\EA:us=\EyH:\
:ve=\E. \Ee:vi=\Ef:vs=\E.":
#### Atari ST
#
# From: Simson L. Garfinkel <simsong@media-lab.mit.edu>
atari-old|atari st:\
:am:bs:\
:co#80:it#8:li#25:\
:al=\EL:cd=\EJ:ce=\EK:cl=\EH\EJ:cm=\EY%+ %+ :dl=\EM:do=\EB:\
:kd=\EB:kl=\ED:kr=\EC:ku=\EA:le=\ED:me=\Eq:nd=\EC:se=\Eq:\
:so=\Ep:sr=\EI:ta=^I:up=\EA:
# UniTerm terminal program for the Atari ST: 49-line VT220 emulation mode
# From: Paul M. Aoki <aoki@ucbvax.berkeley.edu>
uniterm|uniterm49|UniTerm VT220 emulator with 49 lines:\
:li#49:\
:is=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;49r\E[49;1H:\
:tc=vt220:
# MiNT VT52 emulation. 80 columns, 25 rows.
# MiNT is Now TOS, the operating system which comes with all Ataris now
# (mainly Atari Falcon). This termcap is for the VT52 emulation you get
# under tcsh/zsh/bash/sh/ksh/ash/csh when you run MiNT in `console' mode
# From: Per Persson <pp@gnu.ai.mit.edu>, 27 Feb 1996
st52-old|Atari ST with VT52 emulation:\
:am:km:\
:co#80:li#25:\
:K1=\E#7:K2=\E#9:K3=\E#5:K4=\E#1:K5=\E#3:al=\EL:bl=^G:\
:cd=\EJ:ce=\EK:cl=\EH\EJ:cm=\EY%+ %+ :cr=^M:dl=\EM:do=\EB:\
:ho=\EH:k0=\E#D:k1=\E#;:k2=\E#<:k3=\E#=:k4=\E#>:k5=\E#?:\
:k6=\E#@:k7=\E#A:k8=\E#B:k9=\E#C:kA=\E#R:kC=\E#7:kF=\E#2:\
:kR=\E#8:kb=^H:kd=\E#P:kh=\E#G:kl=\E#K:kr=\E#M:ku=\E#H:\
:l0=f10:le=\ED:me=\Eq:nd=\EC:nw=^M^J:r1=\Ez_\Eb@\EcA:\
:rc=\Ek:sc=\Ej:se=\Eq:sf=^J:so=\Ep:sr=\EI:ta=^I:te=:ti=\Ee:\
:up=\EA:ve=\Ee:vi=\Ef:
#### BeOS
#
# BeOS entry for Terminal program Seems to be almost ANSI
beterm|BeOS Terminal:\
:am:eo:mi:ms:xn:xo:\
:Co#8:NC#5:co#80:it#8:li#25:pa#64:\
:&7=^Z:@7=\E[4~:AB=\E[4%dm:AF=\E[3%dm:AL=\E[%dL:DC=\E[%dP:\
:DL=\E[%dM:DO=\E[%dB:F1=\E[21~:F2=\E[22~:IC=\E[%d@:\
:LE=\E[%dD:RI=\E[%dC:Sb=\E[%+(m:Sf=\E[%+^^m:UP=\E[%dA:\
:al=\E[L:bl=^G:cb=\E[1K:cd=\E[J:ce=\E[K:ch=\E[%i%dG:\
:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
:cv=\E[%i%dd:dc=\E[P:dl=\E[M:do=^J:ec=\E[%dX:ei=\E[4l:\
:ho=\E[H:ic=\E[@:im=\E[4h:k1=\E[11~:k2=\E[12~:k3=\E[13~:\
:k4=\E[14~:k5=\E[15~:k6=\E[16~:k7=\E[17~:k8=\E[18~:\
:k9=\E[19~:k;=\E[20~:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:\
:kb=^H:kd=\E[B:ke=\E[?4l:kh=\E[1~:kl=\E[D:kr=\E[C:\
:ks=\E[?4h:ku=\E[A:le=^H:md=\E[1m:me=\E[0;10m:mr=\E[7m:\
:nd=\E[C:nw=^M^J:op=\E[m:r1=\Ec:rc=\E8:sc=\E7:se=\E[m:sf=^J:\
:so=\E[7m:sr=\EM:st=\EH:ta=^I:u6=\E[%i%d;%dR:u7=\E[6n:\
:ue=\E[24m:up=\E[A:us=\E[4m:
#### Linux consoles
#
# This entry is good for the 1.2.13 or later version of the Linux console.
#
# ***************************************************************************
# * *
# * WARNING: *
# * Linuxes come with a default keyboard mapping kcbt=^I. This entry, in *
# * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab *
# * character. Here are the keymap replacement lines that will set this up: *
# * *
# keycode 15 = Tab Tab
# alt keycode 15 = Meta_Tab
# shift keycode 15 = F26
# string F26 ="\033[Z"
# * *
# * This has to use a key slot which is unfortunate (any unused one will *
# * do, F26 is the higher-numbered one). The change ought to be built *
# * into the kernel tables. *
# * *
# ***************************************************************************
#
# All linux kernels since 1.2.13 (at least) set the screen size
# themselves; this entry assumes that capability.
#
# (sgr removed to fit entry within 1023 bytes)
# (rmacs/smacs removed for consistency)
# (acsc removed to fit entry within 1023 bytes)
linux-basic|linux console:\
:am:eo:mi:ms:ut:xn:xo:\
:NC#18:it#8:U8#1:\
:&7=^Z:@7=\E[4~:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:\
:F1=\E[23~:F2=\E[24~:F3=\E[25~:F4=\E[26~:F5=\E[28~:\
:F6=\E[29~:F7=\E[31~:F8=\E[32~:F9=\E[33~:FA=\E[34~:\
:IC=\E[%d@:K2=\E[G:Km=\E[M:LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:\
:SA=\E[?7h:UP=\E[%dA:al=\E[L:bl=^G:cb=\E[1K:cd=\E[J:\
:ce=\E[K:ch=\E[%i%dG:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:\
:cs=\E[%i%d;%dr:ct=\E[3g:cv=\E[%i%dd:dc=\E[P:dl=\E[M:\
:do=^J:ec=\E[%dX:ei=\E[4l:ho=\E[H:ic=\E[@:im=\E[4h:\
:k1=\E[[A:k2=\E[[B:k3=\E[[C:k4=\E[[D:k5=\E[[E:k6=\E[17~:\
:k7=\E[18~:k8=\E[19~:k9=\E[20~:k;=\E[21~:kB=\E[Z:kD=\E[3~:\
:kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=\177:kd=\E[B:kh=\E[1~:\
:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mh=\E[2m:mr=\E[7m:nd=\E[C:\
:nw=^M^J:r1=\Ec\E]R:rc=\E8:sc=\E7:se=\E[27m:sf=^J:sr=\EM:\
:st=\EH:ta=^I:ue=\E[24m:up=\E[A:us=\E[4m:\
:vb=200\E[?5h\E[?5l:tc=vt102+enq:tc=klone+sgr:\
:tc=ecma+color:
linux-m|Linux console no color:\
:Co@:pa@:\
:AB@:AF@:Sb@:Sf@:tc=linux:
# The 1.3.x kernels add color-change capabilities; if yours doesn't have this
# and it matters, turn off <ccc>. The %02x escape used to implement this is
# not supposedly back-portable to older SV curses (although it has worked fine
# on Solaris for several years) and not supported in ncurses versions before
# 1.9.9.
linux-c-nc|linux console with color-change:\
:cc:\
:oc=\E]R:tc=linux-basic:
# From: Dennis Henriksen <opus@osrl.dk>, 9 July 1996
linux-c|linux console 1.3.6+ for older ncurses:\
:cc:\
:oc=\E]R:tc=linux-basic:
# The 2.2.x kernels add a private mode that sets the cursor type; use that to
# get a block cursor for cvvis.
# reported by Frank Heckenbach <frank@g-n-u.de>.
linux2.2|linux 2.2.x console:\
:ve=\E[?25h\E[?0c:vi=\E[?25l\E[?1c:vs=\E[?25h\E[?8c:\
:tc=linux-c-nc:
# Linux 2.6.x has a fix for SI/SO to work with UTF-8 encoding added here:
# http://lkml.indiana.edu/hypermail/linux/kernel/0602.2/0868.html
# Using SI/SO has the drawback that it confuses screen. SCS would work.
# However, SCS is buggy (see comment in Debian #515609) -TD
linux2.6|linux 2.6.x console:\
:ae=^O:as=^N:me=\E[m\017:tc=linux2.2:
# The 3.0 kernel adds support for clearing scrollback buffer (capability E3).
linux3.0|linux 3.0 kernels:\
:E3=\E[3;J:tc=linux2.6:
linux|linux console:\
:tc=linux3.0:
# Subject: linux 2.6.26 vt back_color_erase
# Changes to the Linux console driver broke bce model as reported in
# https://bugzilla.novell.com/show_bug.cgi?id=418613
# apparently from
# http://lkml.org/lkml/2008/4/26/305
# http://groups.google.com/group/fa.linux.kernel/browse_thread/thread/87f98338f0d636bb/aa96e8b86cee0d1e?lnk=st&q=#aa96e8b86cee0d1e
linux2.6.26|linux console w/o bce:\
:ut@:tc=linux2.6:
# See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
linux-nic|linux with ich/ich1 suppressed for non-curses programs:\
:IC@:ic@:tc=linux:
# This assumes you have used setfont(8) to load one of the Linux koi8-r fonts.
# acsc entry from Pavel Roskin" <pavel@absolute.spb.su>, 29 Sep 1997.
linux-koi8|linux with koi8 alternate character set:\
:ac=+\020,\021-\030.^Y0\215`\004a\221f\234g\237h\220i\276j\205k\203l\202m\204n\212o~p\200q\200r\200s_t\206u\207v\211w\210x\201y\230z\231{\267|\274~\224:\
:tc=linux:tc=klone+koi8acs:
# Another entry for KOI8-r with Qing Long's acsc.
# (which one better complies with the standard?)
linux-koi8r|linux with koi8-r alternate character set:\
:tc=linux:tc=klone+koi8acs:
# Entry for the latin1 and latin2 fonts
linux-lat|linux with latin1 or latin2 alternate character set:\
:ac=+\020,\021-\030.^Y0\333`\004a\013f\370g\361h\260i\316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u\215v\301w\302x\205y\363z\362{\343|\330}\234~\376:\
:tc=linux:
# This uses graphics from VT codeset instead of from cp437.
# reason: cp437 (aka "straight to font") is not functional under luit.
# from: Andrey V Lukyanov <land@long.yar.ru>.
linux-vt|linux console using VT codes for graphics:\
:S2@:S3@:\
:ac=++,,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~:\
:ae=\E(K:as=\E(0:me=\E[0m\E(K\017:sa@:tc=linux:
# This is based on the Linux console (relies on the console to perform some
# of the functionality), but does not recognize as many control sequences.
# The program comes bundled with an old (circa 1998) copy of the Linux
# console terminfo. It recognizes some non-ANSI/VT100 sequences such as
# \E* move cursor to home, as as \E[H
# \E,X same as \E(X
# \EE move cursor to beginning of row
# \E[y,xf same as \E[y,xH
#
# Note: The status-line support is buggy (dsl does not work).
kon|kon2|jfbterm|Kanji ON Linux console:\
:cc@:hs:\
:Ic@:Ip@:ds=\E[?H:fs=\E[?F:kB@:oc@:op=\E[37;40m:r1=\Ec:\
:ts=\E[?T:vb@:ve@:vi@:vs@:tc=linux:
# 16-color linux console entry; this works with a 256-character
# console font but bright background colors turn into dim ones when
# you use a 512-character console font. This uses bold for bright
# foreground colors and blink for bright background colors.
linux-16color|linux console with 16 colors:\
:Co#16:NC#54:pa#256:tc=linux:
# bterm (bogl 0.1.18)
# Implementation is in bogl-term.c
# Key capabilities from linux terminfo entry
#
# Notes:
# bterm only supports acs using wide-characters, has case for these: qjxamlkut
# bterm does not support sgr, since it only processes one parameter -TD
bterm|bogl virtual terminal:\
:am:ut:\
:Co#8:co#80:li#24:pa#64:\
:&7=^Z:@7=\E[4~:AB=\E[4%dm:AF=\E[3%dm:F1=\E[23~:F2=\E[24~:\
:F3=\E[25~:F4=\E[26~:F5=\E[28~:F6=\E[29~:F7=\E[31~:\
:F8=\E[32~:F9=\E[33~:FA=\E[34~:K2=\E[G:Km=\E[M:\
:ac=aajjkkllmmqqttuuxx:ae=^O:as=^N:cd=\E[J:ce=\E[K:\
:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:do=^J:ho=\E[H:k1=\E[[A:\
:k2=\E[[B:k3=\E[[C:k4=\E[[D:k5=\E[[E:k6=\E[17~:k7=\E[18~:\
:k8=\E[19~:k9=\E[20~:k;=\E[21~:kB=\E[Z:kD=\E[3~:kI=\E[2~:\
:kN=\E[6~:kP=\E[5~:kb=\177:kd=\E[B:kh=\E[1~:kl=\E[D:\
:kr=\E[C:ku=\E[A:le=^H:md=\E[1m:me=\E[0m:mr=\E[7m:nw=^M^J:\
:op=\E49;39m:se=\E[27m:sf=^J:so=\E[7m:sr=\EM:ue=\E[24m:\
:us=\E[4m:ve=\E[?25h:vi=\E[?25l:
#### Mach
#
# From: Matthew Vernon <mcv21@pick.sel.cam.ac.uk>
mach|Mach Console:\
:am:km:\
:co#80:it#8:li#25:\
:@7=\E[Y:AL=\E[%dL:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:\
:RI=\E[%dC:UP=\E[%dA:al=\E[L:bl=^G:cd=\E[J:ce=\E[K:cl=\Ec:\
:cm=\E[%i%d;%dH:cr=^M:dl=\E[M:do=^J:ho=\E[H:k1=\EOP:\
:k2=\EOQ:k3=\EOR:k4=\EOS:k5=\EOT:k6=\EOU:k7=\EOV:k8=\EOW:\
:k9=\EOX:k;=\EOY:kD=\E[9:kH=\E[F:kI=\E[@:kN=\E[U:kP=\E[V:\
:kb=\177:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:\
:mb=\E[5m:md=\E[1m:me=\E[0m:mr=\E[7m:nd=\E[C:se=\E[0m:\
:sf=^J:so=\E[7m:ta=^I:ue=\E[24m:up=\E[A:us=\E[4m:
mach-bold|Mach Console with bold instead of underline:\
:ue=\E[0m:us=\E[1m:tc=mach:
mach-color|Mach Console with ANSI color:\
:Co#8:pa#64:\
:AB=\E[4%dm:AF=\E[3%dm:mh=\E[2m:mk=\E[8m:op=\E[37;40m:\
:se=\E[27m:tc=mach:
# From: Marcus Brinkmann
# http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/hurd/hurd/console/
#
# Comments in the original are summarized here:
#
# hurd uses 8-bit characters (km).
#
# Although it doesn't do XON/XOFF, we don't want padding characters (xon).
#
# Regarding compatibility to vt100: hurd doesn't specify :xn:, as we don't
# have the eat_newline_glitch. It doesn't support setting or removing tab
# stops (hts/tbc).
#
# hurd uses ^H instead of \E[D for cub1, as only ^H implements :bw: and it is
# one byte instead three.
#
# :ic: is not included because hurd has insert mode.
#
# hurd doesn't use ^J for scrolling, because this could put things into the
# scrollback buffer.
#
# gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
# This is a GNU extension.
#
# The original has commented-out ncv, but is restored here.
#
# Reading the source, RIS resets cnorm, but not xmous.
# (acsc removed to fit entry within 1023 bytes)
# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
hurd|The GNU Hurd console server:\
:am:bw:eo:km:mi:ms:xo:\
:it#8:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
:K2=\E[G:LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:\
:UP=\E[%dA:ae=\E[10m:al=\E[L:as=\E[11m:bl=^G:bt=\E[Z:\
:cd=\E[J:ce=\E[K:cl=\Ec:cm=\E[%i%d;%dH:cr=^M:\
:cs=\E[%i%d;%dr:dc=\E[P:dl=\E[M:do=\E[B:ec=\E[%dX:\
:ei=\E[4l:ho=\E[H:im=\E[4h:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:\
:k5=\E[15~:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:\
:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=\177:kd=\EOB:\
:kh=\E[1~:kl=\EOD:kr=\EOC:ku=\EOA:le=^H:mb=\E[5m:md=\E[1m:\
:me=\E[0m:mh=\E[2m:mr=\E[7m:nd=\E[C:nw=^M^J:rc=\E8:sc=\E7:\
:se=\E[27m:sf=\E[S:so=\E[7m:sr=\E[T:ta=^I:ue=\E[24m:\
:up=\E[A:us=\E[4m:vb=\Eg:ve=\E[?25h:vi=\E[?25l:vs=\E[34l:
#### OSF Unix
#
# OSF/1 1.1 Snapshot 2
pmcons|pmconsole|PMAX console:\
:am:\
:co#128:li#57:\
:bl=^G:cl=^L:cr=^M:do=^J:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:\
:kd=\E[B:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:sf=^J:ta=^I:up=^K:
# SCO console and SOS-Syscons console for 386bsd
# (scoansi: had unknown capabilities
# :Gc=N:Gd=K:Gh=M:Gl=L:Gu=J:Gv=\072:\
# :GC=E:GD=B:GH=D:GL=\64:GU=A:GV=\63:GR=C:
# :G1=?:G2=Z:G3=@:G4=Y:G5=;:G6=I:G7=H:G8=<:\
# :CW=\E[M:NU=\E[N:RF=\E[O:RC=\E[P:\
# :WL=\E[S:WR=\E[T:CL=\E[U:CR=\E[V:\
# I renamed GS/GE/HM/EN/PU/PD/RT and added klone+sgr-dumb, based
# on the :as:=\E[12m -- esr)
#
# klone+sgr-dumb is an error since the acsc does not match -TD
#
# In this description based on SCO's keyboard(HW) manpage list of default
# function key values:
# F13-F24 are shifted F1-F12
# F25-F36 are control F1-F12
# F37-F48 are shift+control F1-F12
#
# hpa/vpa work in the console, but not in scoterm:
# hpa=\E[%p1%dG,
# vpa=\E[%p1%dd,
#
# SCO's terminfo uses
# kLFT=\E[d,
# kRIT=\E[c,
# which do not work (console or scoterm).
#
# Console documents only 3 attributes can be set with SGR (so we don't use sgr).
# (rmacs/smacs removed for consistency)
# (acsc removed to fit entry within 1023 bytes)
# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
scoansi-old|SCO Extended ANSI standard crt (5.0.5):\
:am:bs:eo:xo:\
:co#80:it#8:li#25:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
:LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:\
:al=\E[L:bl=^G:bt=\E[Z:cd=\E[m\E[J:ce=\E[m\E[K:\
:cl=\E[H\E[2J:cm=\E[%i%d;%dH:dc=\E[P:dl=\E[M:do=\E[B:ei=:\
:ho=\E[H:ic=\E[@:im=:k1=\E[M:k2=\E[N:k3=\E[O:k4=\E[P:\
:k5=\E[Q:k6=\E[R:k7=\E[S:k8=\E[T:k9=\E[U:kD=\177:kI=\E[L:\
:kN=\E[G:kP=\E[I:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:\
:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[0;10m:mr=\E[7m:\
:nd=\E[C:rc=\E8:sc=\E7:se=\E[m:sf=\E[S:so=\E[7m:sr=\E[T:\
:st=\EH:ta=^I:ue=\E[m:up=\E[A:us=\E[4m:ve=\E[=10;12C:\
:vi=\E[=14;12C:vs=\E[=0;12C:
scoansi-new|SCO Extended ANSI standard crt (5.0.6):\
:km:\
:MC=\E[=r:MR=\E[=3;0m:Zk=\E[=1;0m:Zl=\E[=1;%i%dm:\
:Zm=\E[=2;%i%dm:Zn=\E[=3;%i%dm:Zo=\E[=0;0m:\
:Zp=\E[=0;%i%dm:cs=\E[%i%d;%dr:mm=\E[=10L:mo=\E[=11L:\
:oc=\E[51m:op=\E[50m:rp=\E[%d;%db:ve=\E[=1c:vi=\E[=0c:\
:vs=\E[=2c:tc=scoansi-old:
# make this easy to change...
scoansi|SCO Extended ANSI standard crt:\
:tc=scoansi-old:
# This actually describes the generic SVr4 display driver for Intel boxes.
# The :mh=\E[2m: isn't documented and therefore may not be reliable.
# From: Eric Raymond <esr@snark.thyrsus.com> Mon Nov 27 19:00:53 EST 1995
att6386|at386|386at|AT&T WGS 6386 console:\
:am:bw:eo:xo:\
:co#80:it#8:li#25:\
:@7=\E[Y:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:F1=\EOZ:\
:F2=\EOA:IC=\E[%d@:LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:\
:SR=\E[%dT:UP=\E[%dA:\
:ac=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~:\
:ae=\E[10m:al=\E[1L:as=\E[12m:bl=^G:bt=\E[Z:cd=\E[J:\
:ce=\E[K:ch=\E[%i%dG:cl=\E[2J\E[H:cm=\E[%i%d;%dH:cr=^M:\
:ct=\E[3g:cv=\E[%i%dd:dc=\E[P:dl=\E[1M:do=\E[B:ec=\E[%dX:\
:ei=:ho=\E[H:ic=\E[1@:im=:is=\E[0;10;39m:k1=\EOP:k2=\EOQ:\
:k3=\EOR:k4=\EOS:k5=\EOT:k6=\EOU:k7=\EOV:k8=\EOW:k9=\EOX:\
:k;=\EOY:kB=^]:kD=\E[P:kI=\E[@:kM=\E0:kN=\E[U:kP=\E[V:kb=^H:\
:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=\E[D:mb=\E[5m:\
:md=\E[1m:me=\E[0;10m:mh=\E[2m:mk=\E[9m:mr=\E[7m:nd=\E[C:\
:nw=\r\E[S:rc=\E8:sc=\E7:se=\E[m:sf=\E[S:so=\E[7m:sr=\E[T:\
:st=\EH:ta=^I:ue=\E[m:up=\E[A:us=\E[4m:ve=\E[=1C:vi=\E[=C:\
:tc=klone+color:
# (pc6300plus: removed ":KM=/usr/lib/ua/kmap.s5:"; renamed BO/EE/CI/CV -- esr)
pc6300plus|AT&T 6300 plus:\
:am:bs:xo:\
:co#80:li#24:\
:al=\E[1L:bl=^G:cd=\E[0J:ce=\E[0K:cl=\E[2J\E[H:\
:cm=\E[%i%2;%2H:cr=^M:ct=\E[3g:dc=\E[1P:dl=\E[1M:do=\E[B:\
:ei=:ho=\E[H:ic=\E[1@:im=:k1=\EOc:k2=\EOd:k3=\EOe:k4=\EOf:\
:k5=\EOg:k6=\EOh:k7=\EOi:k8=\EOj:k9=\EOk:k;=\EOu:kb=^H:\
:kd=\E[B:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:\
:me=\E[m:mh=\E[2m:mk=\E[9m:mr=\E[7m:nd=\E[C:nw=^M^J:\
:se=\E[m:sf=^J:so=\E[7m:st=\EH:ue=\E[m:up=\E[A:us=\E[4m:\
:ve=\E[=1C:vi=\E[=C:
# From: Benjamin C. W. Sittler <bsittler@nmt.edu>
#
# I have a UNIX PC which I use as a terminal attached to my Linux PC.
# Unfortunately, the UNIX PC terminfo entry that comes with ncurses
# is broken. All the special key sequences are broken, making it unusable
# with Emacs. The problem stems from the following:
#
# The UNIX PC has a plethora of keys (103 of them, and there's no numeric
# keypad!), loadable fonts, and strange highlighting modes ("dithered"
# half-intensity, "smeared" bold, and real strike-out, for example.) It also
# uses resizable terminal windows, but the bundled terminal program always
# uses an 80x24 window (and doesn't support seem to support a 132-column
# mode.)
#
# HISTORY: The UNIX PC was one of the first machines with a GUI, and used a
# library which was a superset of SVr3.5 curses (called tam, for "terminal
# access method".) tam includes support for real, overlapping windows,
# onscreen function key labels, and bitmap graphics. But since the primary
# user interface on the UNIX PC was a GUI program (ua, for "user
# assistant",) and remote administration was considered important for the
# machine, tam also supported VT100-compatible terminals attached to the
# serial port or used across the StarLan network. To simulate the extra keys
# not present on a VT100, users could press ESC and a two-letter sequence,
# such as u d (Undo) or U D (Shift-Undo.) These two-letter sequences,
# however, were not the same as those sent by the actual Undo key. The
# actual Undo key sends ESC 0 s unshifted, and ESC 0 S shifted, for example.
# (If you're interested in adding some of the tam calls to ncurses, btw, I
# have the full documentation and several programs which use tam. It also
# used an extended terminfo format to describe key sequences, special
# highlighting modes, etc.)
#
# KEYS: This means that ncurses would quite painful on the UNIX PC, since
# there are two sequences for every key-modifier combination (local keyboard
# sequence and remote "VT100" sequence.) But I doubt many people are trying
# to use ncurses on the UNIX PC, since ncurses doesn't properly handle the
# GUI. Unfortunately, the terminfo entry (and the termcap, too, I presume)
# seem to have been built from the manual describing the VT100 sequences.
# This means it doesn't work for a real live UNIX PC.
#
# FONTS: The UNIX PC also has a strange interpretation of "alternate
# character set". Rather than the VT100 graphics you might expect, it allows
# up to 8 custom fonts to be loaded at any given time. This means that
# programs expecting VT100 graphics will usually be disappointed. For this
# reason I have disabled the smacs/rmacs sequences, but they could easily be
# re-enabled. Here are the relevant control sequences (from the ESCAPE(7)
# manpage), should you wish to do so:
#
# SGR10 - Select font 0 - ESC [ 10 m or SO
# SGR11 - Select font 1 - ESC [ 11 m or SI
# SGR12 - Select font 2 - ESC [ 12 m
# ... (etc.)
# SGR17 - Select font 7 - ESC [ 17 m
#
# Graphics for line drawing are not reliably found at *any* character
# location because the UNIX PC has dynamically reloadable fonts. I use font
# 0 for regular text and font 1 for italics, but this is by no means
# universal. So ASCII line drawing is in order if smacs/rmacs are enabled.
#
# MISC: The cursor visible/cursor invisible sequences were swapped in the
# distributed terminfo.
#
# To ameliorate these problems (and fix a few highlighting bugs) I rewrote
# the UNIX PC terminfo entry. The modified version works great with Lynx,
# Emacs, and XEmacs running on my Linux PC and displaying on the UNIX PC
# attached by serial cable. In Emacs, even the Undo key works, and many
# applications can now use the F1-F8 keys.
#
# esr's notes:
# Terminfo entry for the AT&T Unix PC 7300
# from escape(7) in Unix PC 7300 Manual.
# Somewhat similar to a vt100-am (but different enough
# to redo this from scratch.)
#
# /***************************************************************
# *
# * FONT LOADING PROGRAM FOR THE UNIX PC
# *
# * This routine loads a font defined in the file ALTFONT
# * into font memory slot #1. Once the font has been loaded,
# * it can be used as an alternative character set.
# *
# * The call to ioctl with the argument WIOCLFONT is the key
# * to this routine. For more information, see window(7) in
# * the PC 7300 documentation.
# ***************************************************************/
# #include <string.h> /* needed for strcpy call */
# #include <sys/window.h> /* needed for ioctl call */
# #define FNSIZE 60 /* font name size */
# #define ALTFONT "/usr/lib/wfont/special.8.ft" /* font file */
# /*
# * The file /usr/lib/wfont/special.8.ft comes with the
# * standard PC software. It defines a graphics character set
# * similar to that of the Teletype 5425 terminal. To view
# * this or other fonts in /usr/lib/wfont, use the command
# * cfont <filename>. For further information on fonts see
# * cfont(1) in the PC 7300 documentation.
# */
#
# struct altfdata /* structure for alt font data */
# {
# short altf_slot; /* memory slot number */
# char altf_name[FNSIZE]; /* font name (file name) */
# };
# ldfont()
# {
# int wd; /* window in which altfont will be */
# struct altfdata altf;
# altf.altf_slot=1;
# strcpy(altf.altf_name,ALTFONT);
# for (wd =1; wd < 12; wd++) {
# ioctl(wd, WIOCLFONT,&altf);
# }
# }
#
# (att7300: added :vi:/:ve:/:ic:/<invis> from the BSDI entry,
# they're confirmed by the man page for the System V display---esr)
#
# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
att7300|unixpc|pc7300|3b1|s4|AT&T UNIX PC Model 7300:\
:am:xo:\
:co#80:it#8:li#24:\
:AL=\E[%dL:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:\
:UP=\E[%dA:al=\E[L:bl=^G:bt=\E^I:cd=\E[0J:ce=\E[0K:\
:cl=\E[2J\E[H:cm=\E[%i%d;%dH:cr=^M:dc=\E[P:dl=\E[M:\
:do=\E[B:ei=:ho=\E[H:i1=\017\E[=1w:ic=\E[@:im=:k1=\EOc:\
:k2=\EOd:k3=\EOe:k4=\EOf:k5=\EOg:k6=\EOh:k7=\EOi:k8=\EOj:\
:kD=\ENf:kI=\ENj:kN=\E[U:kP=\E[V:kb=^H:kd=\E[B:kh=\E[H:\
:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mb=\E[9m:md=\E[1m:\
:me=\E[0;10m:mh=\E[2m:mr=\E[7m:nd=\E[C:nw=\EE:se=\E[m:\
:sf=^J:so=\E[7m:sr=\EM:ue=\E[m:up=\E[A:us=\E[4m:ve=\E[=0C:\
:vi=\E[=1C:
# Sent by Stefan Stapelberg <stefan@rent-a-guru.de>, 24 Feb 1997, this is
# from SGI's terminfo database. SGI's entry shows F9-F12 with the codes
# for the application keypad mode. We have added iris-ansi-ap rather than
# change the original to keypad mode.
#
# (iris-ansi: added rmam/smam based on init string -- esr)
#
# This entry, and those derived from it, is used in xwsh (also known as
# winterm). Some capabilities that do not fit into the terminfo model
# include the shift- and control-functionkeys:
#
# F1-F12 generate different codes when shift or control modifiers are used.
# For example:
# F1 \E[001q
# shift F1 \E[013q
# control-F1 \E[025q
#
# In application keypad mode, F9-F12 generate codes like vt100 PF1-PF4, i.e.,
# \EOP to \EOS. The shifted and control modifiers still do the same thing.
#
# The cursor keys also have different codes:
# control-up \E[162q
# control-down \E[165q
# control-left \E[159q
# control-right \E[168q
#
# shift-up \E[161q
# shift-down \E[164q
# shift-left \E[158q
# shift-right \E[167q
#
# control-tab \[072q
#
iris-ansi|iris-ansi-net|IRIS emulating 40 line ANSI terminal (almost VT100):\
:am:\
:co#80:it#8:li#40:\
:!2=\E[218q:#2=\E[143q:#4=\E[158q:%9=\E[209q:%f=\E[210q:\
:%i=\E[167q:&7=\E[217q:*4=\E[P:*7=\E[147q:@7=\E[146q:\
:@8=^M:AL=\E[%dL:DL=\E[%dM:DO=\E[%dB:F1=\E[011q:\
:F2=\E[012q:LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:\
:UP=\E[%dA:al=\E[L:bl=^G:cb=\E[1K:cd=\E[J:ce=\E[K:\
:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:ct=\E[3g:dl=\E[M:do=^J:\
:ho=\E[H:is=\E[?1l\E>\E[?7h\E[100g\E[0m\E7\E[r\E8:\
:k1=\E[001q:k2=\E[002q:k3=\E[003q:k4=\E[004q:k5=\E[005q:\
:k6=\E[006q:k7=\E[007q:k8=\E[008q:k9=\E[009q:k;=\E[010q:\
:kB=\E[Z:kD=\177:kI=\E[139q:kM=\E[146q:kN=\E[154q:\
:kP=\E[150q:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:\
:le=\E[D:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:nw=\EE:rc=\E8:\
:sc=\E7:se=\E[m:sf=\ED:so=\E[1;7m:sr=\EM:st=\EH:ta=^I:\
:ue=\E[m:up=\E[A:us=\E[4m:ve=\E[9/y\E[12/y\E[=6l:\
:vs=\E[10/y\E[=1h\E[=2l\E[=6h:
iris-ansi-ap|IRIS ANSI in application-keypad mode:\
:@8=\EOM:F1=\E[011q:F2=\E[012q:is=\E[?1l\E=\E[?7h:\
:k9=\E[009q:k;=\E[010q:tc=iris-ansi:
# From the man-page, this is a quasi-vt100 emulator that runs on SGI's IRIX
# (T.Dickey 98/1/24)
iris-color|xwsh|IRIX ANSI with color:\
:NC#33:\
:DC=\E[%dP:IC=\E[%d@:ZH=\E[3m:ZR=\E[23m:cs=\E[%i%d;%dr:\
:ec=\E[%dX:ei=:im=:mh=\E[2m:r1=\Ec:\
:r2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:rc=\E8:sc=\E7:\
:ue=\E[24m:tc=vt100+enq:tc=klone+color:tc=iris-ansi-ap:
# The following is a version of the ibm-pc entry distributed with PC/IX,
# (Interactive Systems' System 3 for the Big Blue), modified by Richard
# McIntosh at UCB/CSM. The :pt: and :uc: have been removed from the original,
# (the former is untrue, and the latter failed under UCB/man); standout and
# underline modes have been added. Note: this entry describes the "native"
# capabilities of the PC monochrome display, without ANY emulation; most
# communications packages (but NOT PC/IX connect) do some kind of emulation.
pcix|PC/IX console:\
:am:bw:eo:\
:co#80:li#24:\
:cd=\E[J:ce=\E[K:cl=\Ec:cm=\E[%i%2;%2H:do=\E[B:ho=\E[H:\
:le=^H:me=\E[m:nd=\E[C:se=\E[m:so=\E[7m:ue=\E[m:up=\E[A:\
:us=\E[4m:
# (ibmpcx: this entry used to be known as ibmx.
# It formerly included the following extension capabilities:
# :GC=b:GL=v:GR=t:RT=^J:\
# :GH=\E[196g:GV=\E[179g:\
# :GU=\E[193g:GD=\E[194g:\
# :G1=\E[191g:G2=\E[218g:G3=\E[192g:G4=\E[217g:\
# :CW=\E[E:NU=\E[F:RF=\E[G:RC=\E[H:\
# :WL=\E[K:WR=\E[L:CL=\E[M:CR=\E[N:\
# I renamed GS/GE/WL/WR/CL/CR/PU/PD/HM/EN; also, removed a duplicate
# ":kh=\E[Y:". Added IBM-PC forms characters and highlights, they match
# what was there before. -- esr)
ibmpcx|xenix|ibmx|IBM PC xenix console display:\
:am:bs:ms:\
:co#80:li#25:\
:@7=\E[d:al=\E[L:cd=\E[J:ce=\E[K:cl=^L:cm=\E[%d;%dH:\
:dc=\E[P:dl=\E[M:do=\E[B:ei=:ho=\E[H:ic=\E[@:im=:k1=\E[K:\
:k2=\E[L:k3=\E[M:k4=\E[N:kN=\E[e:kP=\E[Z:kb=^H:kd=\E[B:\
:kh=\E[Y:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:nd=\E[C:up=\E[A:\
:tc=klone+acs:tc=klone+sgr8:
#### QNX
#
# QNX 4.0 Console
# Michael's original version of this entry had <am@>, :ti=\Ei:,
# :te=\Eh\ER:; this was so terminfo applications could write the lower
# right corner without triggering a scroll. The ncurses terminfo library can
# handle this case with the :ic: capability, and prefers :am: for better
# optimization. Bug: The <op> capability resets attributes.
# From: Michael Hunter <mphunter@qnx.com> 30 Jul 1996
# (removed: :sa=%?%p1%t\E<%;%p2%t\E[%;%p3%t\E(%;%p4%t\E{%;%p6%t\E<%;,:)
# (rmacs/smacs removed for consistency)
# (acsc removed to fit entry within 1023 bytes)
# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
qnx|qnx4|qnx console:\
:km:mi:ms:xt:\
:co#80:it#4:li#25:\
:al=\EE:bl=^G:cd=\EJ:ce=\EK:cl=\EH\EJ:cm=\EY%+ %+ :cr=^M:\
:dc=\Ef:dl=\EF:do=^J:ei=:ho=\EH:ic=\Ee:im=:k1=\377\201:\
:k2=\377\202:k3=\377\203:k4=\377\204:k5=\377\205:\
:k6=\377\206:k7=\377\207:k8=\377\210:k9=\377\211:\
:kD=\377\254:kI=\377\253:kN=\377\252:kP=\377\242:\
:kd=\377\251:kh=\377\240:kl=\377\244:kr=\377\246:\
:ku=\377\241:le=^H:mb=\E{:md=\E<:me=\E}\E]\E>\E):mr=\E(:\
:nd=\EC:rp=\Eg%r%+ %.:se=\E):sf=^J:so=\E(:sr=\EI:ta=^I:\
:te=\Eh\ER:ti=\Ei:ue=\E]:up=\EA:us=\E[:ve=\Ey1:vi=\Ey0:\
:vs=\Ey2:
#
#
qnxt|qnxt4|QNX4 terminal:\
:YB:tc=qnx4:
#
qnxm|QNX4 with mouse events:\
:Yd#1:\
:ZC=\E/:ZD=\E":ZJ=\E/>2h:ZT=\E/>2l:ZZ=\E/>1l\E/>9h:\
:Za=\E/>7h:Zb=\E/>7l:Zd=\E/>6l:Zf=\E/>1h:Zg=\E/>1h:\
:Zh=\E/>1h\E/>9l:Zi=\E/>6h:i1=\E/0t:tc=qnx4:
#
qnxw|QNX4 windows:\
:YD:tc=qnxm:
#
# Monochrome QNX4 terminal or console. Setting this terminal type will
# allow an application running on a color console to behave as if it
# were a monochrome terminal. Output will be through stdout instead of
# console writes because the term routines will recognize that the
# terminal name starts with 'qnxt'.
#
qnxtmono|Monochrome QNX4 terminal or console:\
:Co@:pa@:\
:sp@:tc=qnx4:
# From: Federico Bianchi <bianchi@pc-arte2.arte.unipi.it>, 1 Jul 1998
# (esr: commented out <scp> and :te: to avoid warnings.)
# (TD: derive from original qnx4 entry)
qnxt2|qnx 2.15 serial terminal:\
:am:\
:!3@:%h@:%j@:&7@:Sb@:Sf@:dc@:ic@:rp@:se=\E>:so=\E<:te@:ti@:ve@:vi@:\
:vs@:tc=qnx4:
# QNX ANSI terminal definition
# (sgr removed to fit entry within 1023 bytes)
# (acsc removed to fit entry within 1023 bytes)
# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
qansi-g|QNX ANSI:\
:am:es:hs:xo:\
:co#80:it#8:li#25:ws#80:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
:LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:ae=^O:\
:al=\E[1L:as=^N:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:cl=\E[2J\E[H:\
:cm=5\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:\
:dl=\E[1M:do=\E[B:ds=\E[r:ec=\E[%dX:ei=:fs=\E[?6h\E8:\
:ho=\E[H:i2=\E(B\E)0:ic=\E[1@:im=:\
:is=\E>\E[?1l\E[?7h\E[0;10;39;49m:k1=\EOP:k2=\EOQ:\
:k3=\EOR:k4=\EOS:k5=\EOT:k6=\EOU:k7=\EOV:k8=\EOW:k9=\EOX:\
:kD=\E[P:kI=\E[@:kN=\E[U:kP=\E[V:kb=^H:kd=\E[B:kh=\E[H:\
:kl=\E[D:kr=\E[C:ku=\E[A:le=\E[D:ll=\E[99H:mb=\E[5m:\
:md=\E[1m:me=\E[0m:mh=\E[2m:mr=\E[7m:nd=\E[C:nw=\EE:\
:se=\E[27m:sf=\E[S:so=\E[7m:sr=\E[T:st=\EH:ta=^I:\
:ts=\E7\E1;24r\E[?6l\E[25;%i%dH:ue=\E[24m:up=\E[A:\
:us=\E[4m:vb=\E[?5h\E[?5l:ve=\E[?25h\E[?12l:vi=\E[?25l:\
:vs=\E[?12;25h:
#
qansi|QNX ansi with console writes:\
:YA:YC:tc=qansi-g:
#
qansi-t|QNX ansi without console writes:\
:YB:tc=qansi:
#
qansi-m|QNX ansi with mouse:\
:Yd#1:\
:ZC=\E[:ZD=\E]:ZJ=\E[>2h:ZT=\E[>2l:ZZ=\E[>1l\E[>9h:\
:Za=\E[>7h:Zb=\E[>7l:Zd=\E[>6l:Zf=\E[>1h:Zg=\E[>1h:\
:Zh=\E[>1h\E[>9l:Zi=\E[>6h:i1=\E[0t:tc=qansi:
#
qansi-w|QNX ansi for windows:\
:YD:tc=qansi-m:
#### NetBSD consoles
#
# pcvt termcap database entries (corresponding to release 3.31)
# Author's last edit-date: [Fri Sep 15 20:29:10 1995]
#
# (For the terminfo master file, I translated these into terminfo syntax.
# Then I dropped all the pseudo-HP entries. we don't want and can't use
# the :Xs: flag. Then I split :is: into a size-independent :i1: and a
# size-dependent :is:. Finally, I added <rmam>/<smam> -- esr)
# NOTE: :ic: has been taken out of this entry. for reference, it should
# be <ich1=\E[@>. For discussion, see ICH/ICH1 VERSUS RMIR/SMIR below.
# (esr: added :vi: and :ve: to resolve NetBSD Problem Report #4583)
pcvtXX|pcvt vt200 emulator (DEC VT220):\
:am:km:mi:ms:xn:\
:it#8:vt#3:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
:LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:SF=\E[%dS:\
:SR=\E[%dT:UP=\E[%dA:\
:ac=++,,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~:\
:ae=\E(B:al=\E[L:as=\E(0:bl=^G:cb=\E[1K:cd=\E[J:ce=\E[K:\
:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
:ct=\E[3g:dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:ho=\E[H:\
:i1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:im=\E[4h:\
:k1=\E[17~:k2=\E[18~:k3=\E[19~:k4=\E[20~:k5=\E[21~:\
:k6=\E[23~:k7=\E[24~:k8=\E[25~:kD=\E[3~:kH=\E[4~:kI=\E[2~:\
:kN=\E[6~:kP=\E[5~:kb=\177:kd=\EOB:ke=\E[?1l\E>:kh=\E[1~:\
:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:mb=\E[5m:\
:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:nw=\EE:\
:r1=\Ec\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:rc=\E8:\
:rf=/usr/share/tabset/vt100:sc=\E7:se=\E[27m:sf=\ED:\
:so=\E[7m:sr=\EM:st=\EH:ta=^I:ue=\E[24m:up=\E[A:us=\E[4m:\
:ve=\E[?25h:vi=\E[?25l:
# NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
# termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
# 50 lines entries; 80 columns
pcvt25|dec vt220 emulation with 25 lines:\
:co#80:li#25:\
:is=\E[1;25r\E[25;1H:tc=pcvtXX:
pcvt28|dec vt220 emulation with 28 lines:\
:co#80:li#28:\
:is=\E[1;28r\E[28;1H:tc=pcvtXX:
pcvt35|dec vt220 emulation with 35 lines:\
:co#80:li#35:\
:is=\E[1;35r\E[35;1H:tc=pcvtXX:
pcvt40|dec vt220 emulation with 40 lines:\
:co#80:li#40:\
:is=\E[1;40r\E[40;1H:tc=pcvtXX:
pcvt43|dec vt220 emulation with 43 lines:\
:co#80:li#43:\
:is=\E[1;43r\E[43;1H:tc=pcvtXX:
pcvt50|dec vt220 emulation with 50 lines:\
:co#80:li#50:\
:is=\E[1;50r\E[50;1H:tc=pcvtXX:
# NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
# termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
# 50 lines entries; 132 columns
pcvt25w|dec vt220 emulation with 25 lines and 132 cols:\
:co#132:li#25:\
:is=\E[1;25r\E[25;1H:tc=pcvtXX:
pcvt28w|dec vt220 emulation with 28 lines and 132 cols:\
:co#132:li#28:\
:is=\E[1;28r\E[28;1H:tc=pcvtXX:
pcvt35w|dec vt220 emulation with 35 lines and 132 cols:\
:co#132:li#35:\
:is=\E[1;35r\E[35;1H:tc=pcvtXX:
pcvt40w|dec vt220 emulation with 40 lines and 132 cols:\
:co#132:li#40:\
:is=\E[1;40r\E[40;1H:tc=pcvtXX:
pcvt43w|dec vt220 emulation with 43 lines and 132 cols:\
:co#132:li#43:\
:is=\E[1;43r\E[43;1H:tc=pcvtXX:
pcvt50w|dec vt220 emulation with 50 lines and 132 cols:\
:co#132:li#50:\
:is=\E[1;50r\E[50;1H:tc=pcvtXX:
# OpenBSD implements a color variation
pcvt25-color|dec vt220 emulation with 25 lines and color:\
:co#80:li#25:\
:F1=\E[23~:F2=\E[24~:F3=\E[25~:F4=\E[26~:F5=\E[28~:\
:F6=\E[29~:F7=\E[31~:F8=\E[32~:F9=\E[33~:FA=\E[34~:\
:is=\E[1;25r\E[25;1H:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:\
:k5=\E[17~:k6=\E[18~:k7=\E[19~:k8=\E[20~:k9=\E[21~:\
:k;=\E[29~:tc=pcvtXX:tc=ecma+color:
# Terminfo entries to enable the use of the ncurses library in colour on a
# NetBSD-arm32 console (only tested on a RiscPC).
# Created by Dave Millen <dmill@globalnet.co.uk> 22.07.98
# modified codes for setf/setb to setaf/setab, then to klone+color, corrected
# typo in invis - TD
arm100|arm100-am|Arm(RiscPC) ncurses compatible (for 640x480):\
:am:ms:ut:xn:xo:\
:co#80:it#8:li#30:\
:@8=\E[M:DO=\E[%dB:K1=\E[q:K2=\E[r:K3=\E[s:K4=\E[p:K5=\E[n:\
:LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:UP=\E[%dA:\
:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
:ae=^O:as=^N:bl=^G:cb=3\E[1K:cd=50\E[J:ce=3\E[K:\
:cl=50\E[H\E[J:cm=5\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
:ct=\E[3g:do=^J:eA=\E(B\E)0:ho=\E[H:k0=\E[y:k1=\E[P:\
:k2=\E[Q:k3=\E[R:k4=\E[S:k5=\E[t:k6=\E[u:k7=\E[v:k8=\E[l:\
:k9=\E[w:k;=\E[x:kb=^H:kd=\E[B:ke=\E[?1l\E>:kl=\E[D:\
:kr=\E[C:ks=\E[?1h\E=:ku=\E[A:le=^H:mb=2\E[5m:md=2\E[1m:\
:me=2\E[0m:mk=2\E[8m:mr=2\E[7m:nd=2\E[C:rc=\E8:\
:rs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:sc=\E7:se=2\E[m:\
:sf=^J:so=2\E[7m:sr=5\EM:st=\EH:ta=^I:ue=2\E[m:up=2\E[A:\
:us=2\E[4m:tc=ecma+sgr:tc=klone+color:
arm100-w|arm100-wam|Arm(RiscPC) ncurses compatible (for 1024x768):\
:co#132:li#50:tc=arm100:
# NetBSD/x68k console vt200 emulator. This port runs on a 68K machine
# manufactured by Sharp for the Japenese market.
# From Minoura Makoto <minoura@netlaputa.or.jp>, 12 May 1996
x68k|x68k-ite|NetBSD/x68k ITE:\
:co#96:li#32:\
:%1=\E[28~:kC=\E[9~:tc=vt220:
# <tv@pobox.com>:
# Entry for the DNARD OpenFirmware console, close to ANSI but not quite.
#
# (still unfinished, but good enough so far.)
ofcons|DNARD OpenFirmware console:\
:bw:\
:co#80:li#30:\
:AL=\233%dL:DC=\233%dP:DL=\233%dM:DO=\233%dB:IC=\233%d@:\
:LE=\233%dD:RI=\233%dC:UP=\233%dA:al=\233L:bl=^G:cd=\233J:\
:ce=\233K:cl=^L:cm=\233%i%d;%dH:cr=^M:dc=\233P:dl=\233M:\
:do=\233B:ei=:ic=\233@:im=:k1=\2330P:k2=\2330Q:k3=\2330W:\
:k4=\2330x:k5=\2330t:k6=\2330u:k7=\2330q:k8=\2330r:\
:k9=\2330p:k;=\2330M:kD=\233P:kN=\233/:kP=\233?:kb=^H:\
:kd=\233B:kl=\233D:kr=\233C:ku=\233A:le=\233D:mb=\2337;2m:\
:md=\2331m:me=\2330m:mh=\2332m:mk=\2338m:mr=\2337m:\
:nd=\233C:nw=^M^J:se=\2330m:sf=^J:ta=^I:ue=\2330m:up=\233A:\
:vb=^G:
# NetBSD "wscons" emulator in vt220 mode.
# This entry is based on the NetBSD termcap entry, correcting the ncv value.
# The emulator renders underlined text in red. Colors are otherwise usable.
#
# Testing the emulator and reading the source code (NetBSD 2.0), it appears
# that "vt220" is inaccurate. There are a few vt220-features, but most of the
# vt220 screens in vttest do not work with this emulator. For instance, it
# identifies itself (primary DA response) as a vt220 with selective erase. But
# the selective erase feature does not work. The secondary response is copied
# from Kermit's emulation of vt220, does not correspond to actual vt220. At
# the level of detail in a termcap, it is a passable emulator, since ECH does
# work. Don't use it on a VMS system -TD
wsvt25|NetBSD wscons in 25 line DEC VT220 mode:\
:ms:ut:\
:Co#8:NC#2:co#80:it#8:li#25:pa#64:\
:@7=\E[8~:AB=\E[4%dm:AF=\E[3%dm:F1=\E[23~:F2=\E[24~:\
:is=\E[r\E[25;1H:k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~:\
:k5=\E[15~:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:\
:k;=\E[21~:kh=\E[7~:op=\E[m:r1=\Ec:tc=vt220:
wsvt25m|NetBSD wscons in 25 line DEC VT220 mode with Meta:\
:km:tc=wsvt25:
# `rasterconsole' provided by 4.4BSD, NetBSD and OpenBSD on SPARC, and
# DECstation/pmax.
rcons|BSD rasterconsole:\
:tc=sun-il:
# Color version of above. Color currently only provided by NetBSD.
rcons-color|BSD rasterconsole with ANSI color:\
:ut:\
:Co#8:pa#64:\
:AB=\E[4%dm:AF=\E[3%dm:op=\E[m:tc=rcons:
# mgterm -- MGL/MGL2, MobileGear Graphic Library
# for PocketBSD,PocketLinux,NetBSD/{hpcmips,mac68k}
# -- the setf/setb are probably incorrect, more likely setaf/setab -TD
# -- compare with cons25w
mgterm:\
:NP:am:bs:bw:eo:km:ms:pt:ut:\
:Co#8:co#80:it#8:li#18:pa#64:\
:@7=\E[F:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:F1=\E[W:\
:F2=\E[X:IC=\E[%d@:K2=\E[E:LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:\
:SR=\E[%dT:Sb=\E[4%dm:Sf=\E[3%dm:UP=\E[%dA:al=\E[L:bl=^G:\
:bt=\E[Z:cb=\E[1K:cd=\E[J:ce=\E[K:ch=\E[%i%d`:cl=\E[H\E[J:\
:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:cv=\E[%i%dd:dc=\E[P:\
:dl=\E[M:do=\E[B:ec=\E[%dX:ei=:ho=\E[H:ic=\E[@:im=:k1=\E[M:\
:k2=\E[N:k3=\E[O:k4=\E[P:k5=\E[Q:k6=\E[R:k7=\E[S:k8=\E[T:\
:k9=\E[U:k;=\E[V:kB=\E[Z:kD=\177:kI=\E[L:kN=\E[G:kP=\E[I:\
:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:\
:mb=\E[5m:md=\E[1m:me=\E[m:mh=\E[30;1m:mr=\E[7m:nd=\E[C:\
:nw=\E[E:op=\E[x:rc=\E8:rs=\E[x\E[m\Ec:sc=\E7:se=\E[m:\
:sf=\E[S:so=\E[7m:sr=\E[T:ta=^I:up=\E[A:
#### FreeBSD console entries
#
# From: Andrey Chernov <ache@astral.msk.su> 29 Mar 1996
# Andrey Chernov maintains the FreeBSD termcap distributions.
#
# Note: Users of FreeBSD 2.1.0 and older versions must either upgrade
# or comment out the :cb: capability in the console entry.
#
# Alexander Lukyanov reports:
# I have seen FreeBSD-2.1.5R... The old el1 bug changed, but it is still there.
# Now el1 clears not only to the line beginning, but also a large chunk
# of previous line. But there is another bug - ech does not work at all.
#
# for syscons
# common entry without semigraphics
# Bug: The <op> capability resets attributes.
# Bug? The ech and el1 attributes appear to move the cursor in some cases; for
# instance el1 does if the cursor is moved to the right margin first. Removed
# by T.Dickey 97/5/3 (ech=\E[%p1%dX, el1=\E[1K)
#
# Setting colors turns off reverse; we cannot guarantee order, so use ncv.
# Note that this disables standout with color.
#
# The emulator sends difference strings based on shift- and control-keys,
# like scoansi:
# F13-F24 are shifted F1-F12
# F25-F36 are control F1-F12
# F37-F48 are shift+control F1-F12
# (sgr removed to fit entry within 1023 bytes)
# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
cons25w|ansiw|ansi80x25-raw|freebsd console (25-line raw mode):\
:am:bw:eo:ms:\
:co#80:it#8:li#25:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
:K2=\E[E:LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:\
:UP=\E[%dA:al=\E[L:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:\
:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:dc=\E[P:dl=\E[M:do=\E[B:\
:ec=\E[%dX:ei=:ho=\E[H:ic=\E[@:im=:k1=\E[M:k2=\E[N:k3=\E[O:\
:k4=\E[P:k5=\E[Q:k6=\E[R:k7=\E[S:k8=\E[T:k9=\E[U:kD=\177:\
:kI=\E[L:kN=\E[G:kP=\E[I:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:\
:kr=\E[C:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[m:\
:mh=\E[30;1m:mr=\E[7m:nd=\E[C:nw=\E[E:rc=\E8:\
:rs=\E[x\E[m\Ec:sc=\E7:se=\E[m:sf=\E[S:so=\E[7m:sr=\E[T:\
:ta=^I:up=\E[A:ve=\E[=0C:vs=\E[=1C:
cons25|ansis|ansi80x25|freebsd console (25-line ansi mode):\
:ac=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~\371:\
:tc=cons25w:
cons25-debian|freebsd console with debian backspace (25-line ansi mode):\
:kD=\E[3~:kb=\177:tc=cons25:
cons25-m|ansis-mono|ansi80x25-mono|freebsd console (25-line mono ansi mode):\
:Co@:pa@:\
:AB@:AF@:md@:mh@:op@:ue=\E[m:us=\E[4m:tc=cons25:
cons30|ansi80x30|freebsd console (30-line ansi mode):\
:li#30:tc=cons25:
cons30-m|ansi80x30-mono|freebsd console (30-line mono ansi mode):\
:li#30:tc=cons25-m:
cons43|ansi80x43|freebsd console (43-line ansi mode):\
:li#43:tc=cons25:
cons43-m|ansi80x43-mono|freebsd console (43-line mono ansi mode):\
:li#43:tc=cons25-m:
cons50|ansil|ansi80x50|freebsd console (50-line ansi mode):\
:li#50:tc=cons25:
cons50-m|ansil-mono|ansi80x50-mono|freebsd console (50-line mono ansi mode):\
:li#50:tc=cons25-m:
cons60|ansi80x60|freebsd console (60-line ansi mode):\
:li#60:tc=cons25:
cons60-m|ansi80x60-mono|freebsd console (60-line mono ansi mode):\
:li#60:tc=cons25-m:
cons25r|pc3r|ibmpc3r|cons25-koi8-r|freebsd console w/koi8-r cyrillic:\
:ac=-\030.^Y0\215`\004a\220f\234h\221i\025j\205k\203l\202m\204n\212q\200t\206u\207v\211w\210x\201y\230z\231~\225:\
:tc=cons25w:
cons25r-m|pc3r-m|ibmpc3r-mono|cons25-koi8r-m|freebsd console w/koi8-r cyrillic (mono):\
:Co@:pa@:\
:AB@:AF@:op@:ue=\E[m:us=\E[4m:tc=cons25r:
cons50r|cons50-koi8r|freebsd console w/koi8-r cyrillic (50 lines):\
:li#50:tc=cons25r:
cons50r-m|cons50-koi8r-m|freebsd console w/koi8-r cyrillic (50-line mono):\
:li#50:tc=cons25r-m:
cons60r|cons60-koi8r|freebsd console w/koi8-r cyrillic (60 lines):\
:li#60:tc=cons25r:
cons60r-m|cons60-koi8r-m|freebsd console w/koi8-r cyrillic (60-line mono):\
:li#60:tc=cons25r-m:
# ISO 8859-1 FreeBSD console
cons25l1|cons25-iso8859|freebsd console w/iso 8859-1 chars:\
:ac=+\253,\273-\030.\031`\201a\202f\207g\210i\247j\213k\214l\215m\216n\217o\220p\221q\222r\223s\224t\225u\226v\227w\230x\231y\232z\233~\237:\
:tc=cons25w:
cons25l1-m|cons25-iso-m|freebsd console w/iso 8859-1 chars (mono):\
:Co@:pa@:\
:AB@:AF@:md@:mh@:op@:ue=\E[m:us=\E[4m:tc=cons25l1:
cons50l1|cons50-iso8859|freebsd console w/iso 8859-1 chars (50 lines):\
:li#50:tc=cons25l1:
cons50l1-m|cons50-iso-m|freebsd console w/iso 8859-1 chars (50-line mono):\
:li#50:tc=cons25l1-m:
cons60l1|cons60-iso|freebsd console w/iso 8859-1 chars (60 lines):\
:li#60:tc=cons25l1:
cons60l1-m|cons60-iso-m|freebsd console w/iso 8859-1 chars (60-line mono):\
:li#60:tc=cons25l1-m:
#### 386BSD and BSD/OS Consoles
#
# This was the original 386BSD console entry (I think).
# Some places it's named oldpc3|oldibmpc3.
# From: Alex R.N. Wetmore <aw2t@andrew.cmu.edu>
origpc3|origibmpc3|IBM PC 386BSD Console:\
:am:bs:bw:eo:xo:\
:co#80:li#25:\
:ac=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263:\
:cd=\E[J:ce=\E[K:cl=\Ec:cm=\E[%i%2;%2H:do=\E[B:ho=\E[H:\
:kd=\E[B:kh=\E[Y:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:md=\E[7m:\
:me=\E[m\E[1;0x\E[2;7x:nd=\E[C:se=\E[1;0x\E[2;7x:\
:sf=\E[S:so=\E[1;7x\E[2;0x:sr=\E[T:ue=\E[1;0x\E[2;7x:\
:up=\E[A:us=\E[1;7x\E[2;0x:
# description of BSD/386 console emulator in version 1.0 (supplied by BSDI)
oldpc3|oldibmpc3|old IBM PC BSD/386 Console:\
:bs:km:\
:li#25:\
:al=\E[L:bl=^G:cr=^M:dl=\E[M:do=^J:kH=\E[F:kI=\E[L:kN=\E[G:\
:kP=\E[I:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:\
:md=\E[=15F:me=\E[=R:mh=\E[=8F:nw=^M^J:sf=^J:ta=^I:
# Description of BSD/OS console emulator in version 1.1, 2.0, 2.1
# Note, the emulator supports many of the additional console features
# listed in the iBCS2 (e.g. character-set selection) though not all
# are described here. This entry really ought to be upgraded.
# Also note, the console will also work with fewer lines after doing
# "stty rows NN", e.g. to use 24 lines.
# (Color support from Kevin Rosenberg <kevin@cyberport.com>, 2 May 1996)
# Bug: The <op> capability resets attributes.
bsdos-pc|IBM PC BSD/OS Console:\
:tc=bsdos-pc-nobold:
bsdos-pc-nobold|BSD/OS PC console w/o bold:\
:tc=klone+color:tc=bsdos-pc-m:
bsdos-pc-m|bsdos-pc-mono|BSD/OS PC console mono:\
:am:bs:eo:km:xo:\
:co#80:it#8:li#25:\
:AL=\E[%dL:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:\
:UP=\E[%dA:al=\E[L:bl=^G:cd=\E[J:ce=\E[K:cl=\Ec:\
:cm=\E[%i%d;%dH:cr=^M:dl=\E[M:do=^J:ho=\E[H:kH=\E[F:\
:kI=\E[L:kN=\E[G:kP=\E[I:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:\
:kr=\E[C:ku=\E[A:le=^H:nd=\E[C:nw=^M^J:rc=\E8:sc=\E7:sf=^J:\
:ta=^I:up=\E[A:tc=klone+sgr8:
# Old names for BSD/OS PC console used in releases before 4.1.
pc3|BSD/OS on the PC Console:\
:tc=bsdos-pc-nobold:
ibmpc3|pc3-bold|BSD/OS on the PC Console with bold instead of underline:\
:tc=bsdos-pc:
# BSD/OS on the SPARC
bsdos-sparc|Sun SPARC BSD/OS Console:\
:tc=sun:
# BSD/OS on the PowerPC
bsdos-ppc|PowerPC BSD/OS Console:\
:tc=bsdos-pc:
#### DEC VT52
# (<acsc>/:ae:/:as: capabilities aren't in DEC's official entry -- esr)
#
# Actually (TD pointed this out at the time the acsc string was added):
# vt52 shouldn't define full acsc since most of the cells don't match.
# see vt100 manual page A-31. This is the list that does match:
# f degree
# g plus/minus
# h right-arrow
# k down-arrow
# m scan-1
# o scan-3
# q scan-5
# s scan-7
# The line-drawing happens to work in several terminal emulators, but should
# not be used as a guide to the capabilities of the vt52. Note in particular
# that vt52 does not support line-drawing characters (the scan-X values refer
# to a crude plotting feature) -TD
vt52|dec vt52:\
:bs:\
:co#80:it#8:li#24:\
:ac=+h.k0affggolpnqprrss:ae=\EG:as=\EF:bl=^G:cd=\EJ:\
:ce=\EK:cl=\EH\EJ:cm=\EY%+ %+ :cr=^M:do=\EB:ho=\EH:kb=^H:\
:kd=\EB:kl=\ED:kr=\EC:ku=\EA:le=\ED:nd=\EC:nw=^M^J:sf=^J:\
:sr=\EI:ta=^I:up=\EA:
#### DEC VT100 and compatibles
#
# DEC terminals from the vt100 forward are collected here. Older DEC terminals
# and micro consoles can be found in the `obsolete' section. More details on
# the relationship between the VT100 and ANSI X3.64/ISO 6429/ECMA-48 may be
# found near the end of this file.
#
# Except where noted, these entries are DEC's official terminfos.
# Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
# Engineering for more information. Updated terminfos and termcaps
# are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
#
# In October 1995 DEC sold its terminals business, including the VT and Dorio
# line and trademark, to SunRiver Data Systems. SunRiver has since changed
# its name to Boundless Technologies; see http://www.boundless.com.
#
# NOTE: Any VT100 emulation, whether in hardware or software, almost
# certainly includes what DEC called the `Level 1 editing extension' codes;
# only the very oldest VT100s lacked these and there probably aren't any of
# those left alive. To capture these, use one of the VT102 entries.
#
# Note that the :xn: glitch in vt100 is not quite the same as on the Concept,
# since the cursor is left in a different position while in the
# weird state (concept at beginning of next line, vt100 at end
# of this line) so all versions of vi before 3.7 don't handle
# :xn: right on vt100. The correct way to handle :xn: is when
# you output the char in column 80, immediately output CR LF
# and then assume you are in column 1 of the next line. If :xn:
# is on, am should be on too.
#
# I assume you have smooth scroll off or are at a slow enough baud
# rate that it doesn't matter (1200? or less). Also this assumes
# that you set auto-nl to "on", if you set it off use vt100-nam
# below.
#
# The padding requirements listed here are guesses. It is strongly
# recommended that xon/xoff be enabled, as this is assumed here.
#
# The vt100 uses <rs2> and <rf> rather than :is:/:ct:/:st: because the
# tab settings are in non-volatile memory and don't need to be
# reset upon login. Also setting the number of columns glitches
# the screen annoyingly. You can type "reset" to get them set.
#
# The VT100 series terminals have cursor ("arrows") keys which can operate
# in two different modes: Cursor Mode and Application Mode. Cursor Mode
# is the reset state, and is assumed to be the normal state. Application
# Mode is the "set" state. In Cursor Mode, the cursor keys transmit
# "Esc [ {code}" sequences, conforming to ANSI standards. In Application
# Mode, the cursor keys transmit "Esc O <code>" sequences. Application Mode
# was provided primarily as an aid to the porting of VT52 applications. It is
# assumed that the cursor keys are normally in Cursor Mode, and expected that
# applications such as vi will always transmit the :ks: string. Therefore,
# the definitions for the cursor keys are made to match what the terminal
# transmits after the :ks: string is transmitted. If the :ks: string
# is a null string or is not defined, then cursor keys are assumed to be in
# "Cursor Mode", and the cursor keys definitions should match that assumption,
# else the application may fail. It is also expected that applications will
# always transmit the :ke: string to the terminal before they exit.
#
# The VT100 series terminals have an auxiliary keypad, commonly referred to as
# the "Numeric Keypad", because it is a cluster of numeric and function keys.
# The Numeric Keypad which can operate in two different modes: Numeric Mode and
# Application Mode. Numeric Mode is the reset state, and is assumed to be
# the normal state. Application Mode is the "set" state. In Numeric Mode,
# the numeric and punctuation keys transmit ASCII 7-bit characters, and the
# Enter key transmits the same as the Return key (Note: the Return key
# can be configured to send either LF (\015) or CR LF). In Application Mode,
# all the keypad keys transmit "Esc O {code}" sequences. The PF1 - PF4 keys
# always send the same "Esc O {code}" sequences. It is assumed that the keypad
# is normally in Numeric Mode. If an application requires that the keypad be
# in Application Mode then it is expected that the user, or the application,
# will set the TERM environment variable to point to a terminfo entry which has
# defined the :ks: string to include the codes that switch the keypad into
# Application Mode, and the terminfo entry will also define function key
# fields to match the Application Mode control codes. If the :ks: string
# is a null string or is not defined, then the keypad is assumed to be in
# Numeric Mode. If the :ks: string switches the keypad into Application
# Mode, it is expected that the :ke: string will contain the control codes
# necessary to reset the keypad to "Normal" mode, and it is also expected that
# applications which transmit the :ks: string will also always transmit the
# :ke: string to the terminal before they exit.
#
# Here's a diagram of the VT100 keypad keys with their bindings.
# The top line is the name of the key (some DEC keyboards have the keys
# labelled somewhat differently, like GOLD instead of PF1, but this is
# the most "official" name). The second line is the escape sequence it
# generates in Application Keypad mode (where "$" means the ESC
# character). The third line contains two items, first the mapping of
# the key in terminfo, and then in termcap.
# _______________________________________
# | PF1 | PF2 | PF3 | PF4 |
# | $OP | $OQ | $OR | $OS |
# |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
# | 7 8 9 - |
# | $Ow | $Ox | $Oy | $Om |
# |_kf9__k9_|_kf10_k;_|_kf0__k0_|_________|
# | 4 | 5 | 6 | , |
# | $Ot | $Ou | $Ov | $Ol |
# |_kf5__k5_|_kf6__k6_|_kf7__k7_|_kf8__k8_|
# | 1 | 2 | 3 | |
# | $Oq | $Or | $Os | enter |
# |_ka1__K1_|_kb2__K2_|_ka3__K3_| $OM |
# | 0 | . | |
# | $Op | $On | |
# |___kc1_______K4____|_kc3__K5_|_kent_@8_|
#
# Note however, that the arrangement of the 5-key ka1-kc3 do not follow the
# terminfo guidelines. That is a compromise used to assign the remaining
# keys on the keypad to kf5-kf0, used on older systems with legacy termcap
# support:
vt100+keypad|dec vt100 numeric keypad no fkeys:\
:K1=\EOq:K2=\EOr:K3=\EOs:K4=\EOp:K5=\EOn:
vt100+pfkeys|dec vt100 numeric keypad:\
:@8=\EOM:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:tc=vt100+keypad:
vt100+fnkeys|dec vt100 numeric keypad:\
:k0=\EOy:k5=\EOt:k6=\EOu:k7=\EOv:k8=\EOl:k9=\EOw:k;=\EOx:\
:tc=vt100+pfkeys:
#
# A better adaptation to modern keyboards such as the PC's, which have a dozen
# function keys and the keypad 2,4,6,8 keys are labeled with arrows keys, is to
# use the 5-key arrangement to model the arrow keys as suggested in the
# terminfo guidelines:
# _______________________________________
# | PF1 | PF2 | PF3 | PF4 |
# | $OP | $OQ | $OR | $OS |
# |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
# | 7 8 9 - |
# | $Ow | $Ox | $Oy | $Om |
# |_ka1__K1_|_________|_ka3__K3_|_________|
# | 4 | 5 | 6 | , |
# | $Ot | $Ou | $Ov | $Ol |
# |_________|_kb2__K2_|_________|_________|
# | 1 | 2 | 3 | |
# | $Oq | $Or | $Os | enter |
# |_kc1__K4_|_________|_kc3__K5_| $OM |
# | 0 | . | |
# | $Op | $On | |
# |___________________|_________|_kent_@8_|
#
vt220+keypad|dec vt220 numeric keypad:\
:@8=\EOM:K1=\EOw:K2=\EOu:K3=\EOy:K4=\EOq:K5=\EOs:k1=\EOP:\
:k2=\EOQ:k3=\EOR:k4=\EOS:
#
vt100+enq|ncurses extension for vt100-style ENQ:\
:u8=\E[?1;2c:tc=ansi+enq:
vt102+enq|ncurses extension for vt102-style ENQ:\
:u8=\E[?6c:tc=ansi+enq:
#
# And here, for those of you with orphaned VT100s lacking documentation, is
# a description of the soft switches invoked when you do `Set Up'.
#
# Scroll 0-Jump Shifted 3 0-#
# | 1-Smooth | 1-British pound sign
# | Autorepeat 0-Off | Wrap Around 0-Off
# | | 1-On | | 1-On
# | | Screen 0-Dark Bkg | | New Line 0-Off
# | | | 1-Light Bkg | | | 1-On
# | | | Cursor 0-Underline | | | Interlace 0-Off
# | | | | 1-Block | | | | 1-On
# | | | | | | | |
# 1 1 0 1 1 1 1 1 0 1 0 0 0 0 1 0 <--Standard Settings
# | | | | | | | |
# | | | Auto XON/XOFF 0-Off | | | Power 0-60 Hz
# | | | 1-On | | | 1-50 Hz
# | | Ansi/VT52 0-VT52 | | Bits Per Char. 0-7 Bits
# | | 1-ANSI | | 1-8 Bits
# | Keyclick 0-Off | Parity 0-Off
# | 1-On | 1-On
# Margin Bell 0-Off Parity Sense 0-Odd
# 1-On 1-Even
#
# The following SET-UP modes are assumed for normal operation:
# ANSI_MODE AUTO_XON/XOFF_ON NEWLINE_OFF 80_COLUMNS
# WRAP_AROUND_ON JUMP_SCROLL_OFF
# Other SET-UP modes may be set for operator convenience or communication
# requirements; I recommend
# AUTOREPEAT_ON BLOCK_CURSOR MARGIN_BELL_OFF SHIFTED_3_#
# Unless you have a graphics add-on such as Digital Engineering's VT640
# (and even then, whenever it can be arranged!) you should set
# INTERLACE_OFF
#
# (vt100: I added <rmam>/<smam> based on the init string, also :bs:. -- esr)
vt100|vt100-am|dec vt100 (w/advanced video):\
:5i:am:bs:ms:xn:xo:\
:co#80:it#8:li#24:vt#3:\
:DO=\E[%dB:LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:\
:UP=\E[%dA:\
:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
:ae=^O:as=^N:bl=^G:cb=3\E[1K:cd=50\E[J:ce=3\E[K:\
:cl=50\E[H\E[J:cm=5\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
:ct=\E[3g:do=^J:eA=\E(B\E)0:ho=\E[H:kb=^H:kd=\EOB:\
:ke=\E[?1l\E>:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:l1=pf1:\
:l2=pf2:l3=pf3:l4=pf4:le=^H:mb=2\E[5m:md=2\E[1m:me=2\E[0m:\
:mr=2\E[7m:nd=2\E[C:pf=\E[4i:po=\E[5i:ps=\E[0i:rc=\E8:\
:rs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:sc=\E7:se=2\E[m:\
:sf=^J:so=2\E[7m:sr=5\EM:st=\EH:ta=^I:ue=2\E[m:up=2\E[A:\
:us=2\E[4m:tc=vt100+fnkeys:
vt100nam|vt100-nam|vt100 no automargins:\
:am@:xn@:tc=vt100-am:
vt100-vb|dec vt100 (w/advanced video) & no beep:\
:bl@:vb=\E[?5h\E[?5l:tc=vt100:
# Ordinary vt100 in 132 column ("wide") mode.
vt100-w|vt100-w-am|dec vt100 132 cols (w/advanced video):\
:co#132:li#24:\
:rs=\E>\E[?3h\E[?4l\E[?5l\E[?8h:tc=vt100-am:
vt100-w-nam|vt100-nam-w|dec vt100 132 cols (w/advanced video no automargin):\
:co#132:li#14:vt@:\
:rs=\E>\E[?3h\E[?4l\E[?5l\E[?8h:tc=vt100-nam:
# vt100 with no advanced video.
vt100-nav|vt100 without advanced video option:\
:sg#1:\
:mb@:md@:me@:mr@:sa@:se=\E[m:so=\E[7m:ue@:us@:tc=vt100:
vt100-nav-w|vt100-w-nav|dec vt100 132 cols 14 lines (no advanced video option):\
:co#132:li#14:tc=vt100-nav:
# vt100 with one of the 24 lines used as a status line.
# We put the status line on the top.
vt100-s|vt100-s-top|vt100-top-s|vt100 for use with top sysline:\
:es:hs:\
:li#23:\
:cl=50\E[2;1H\E[J:cm=5\E[%i%+^A;%dH:cs=\E[%i%i%d;%dr:\
:ds=\E7\E[1;24r\E8:fs=\E8:ho=\E[2;1H:is=\E7\E[2;24r\E8:\
:ts=\E7\E[1;%dH\E[1K:tc=vt100-am:
# Status line at bottom.
# Clearing the screen will clobber status line.
vt100-s-bot|vt100-bot-s|vt100 for use with bottom sysline:\
:es:hs:\
:li#23:\
:ds=\E7\E[1;24r\E8:fs=\E8:is=\E[1;23r\E[23;1H:\
:ts=\E7\E[24;%dH\E[1K:tc=vt100-am:
# Most of the `vt100' emulators out there actually emulate a vt102
# This entry (or vt102-nsgr) is probably the right thing to use for
# these.
vt102|dec vt102:\
:al=\E[L:dc=\E[P:dl=\E[M:ei=\E[4l:im=\E[4h:tc=vt100:
vt102-w|dec vt102 in wide mode:\
:co#132:\
:r3=\E[?3h:tc=vt102:
# Many brain-dead PC comm programs that pretend to be `vt100-compatible'
# fail to interpret the ^O and ^N escapes properly. Symptom: the :me:
# string in the canonical vt100 entry above leaves the screen littered
# with little snowflake or star characters (IBM PC ROM character \017 = ^O)
# after highlight turnoffs. This entry should fix that, and even leave
# ACS support working, at the cost of making multiple-highlight changes
# slightly more expensive.
# From: Eric S. Raymond <esr@snark.thyrsus.com> July 22 1995
vt102-nsgr|vt102 no sgr (use if you see snowflakes after highlight changes):\
:me=\E[m:sa@:tc=vt102:
# VT125 Graphics CRT. Clear screen also erases graphics
# Some vt125's came configured with vt102 support.
vt125|vt125 graphics terminal:\
:mi:\
:cl=50\E[H\E[2J\EPpS(E)\E\\:tc=vt100:
# This isn't a DEC entry, it came from University of Wisconsin.
# (vt131: I added <rmam>/<smam> based on the init string, also :bs: -- esr)
vt131|dec vt131:\
:am:bs:xn:\
:co#80:it#8:li#24:vt#3:\
:RA=\E[?7h:SA=\E[?7h:bl=^G:cd=50\E[J:ce=3\E[K:\
:cl=50\E[;H\E[2J:cm=5\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
:do=^J:ho=\E[H:is=\E[1;24r\E[24;1H:k1=\EOP:k2=\EOQ:\
:k3=\EOR:k4=\EOS:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:\
:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:mb=2\E[5m:md=2\E[1m:\
:me=2\E[m:mr=2\E[7m:nd=2\E[C:nw=^M^J:\
:r1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:rc=\E8:sc=\E7:\
:se=2\E[m:so=2\E[7m:sr=5\EM:ta=^I:ue=2\E[m:up=2\E[A:\
:us=2\E[4m:
# vt132 - like vt100 but slower and has ins/del line and such.
# I'm told that :im:/:ei: are backwards in the terminal from the
# manual and from the ANSI standard, this describes the actual
# terminal. I've never actually used a vt132 myself, so this
# is untested.
#
vt132|DEC vt132:\
:xn:\
:al=99\E[L:dc=7\E[P:dl=99\E[M:ei=\E[4h:im=\E[4l:ip=7:\
:sf=30\n:tc=vt100:
# This vt220 description maps F5--F9 to the second block of function keys
# at the top of the keyboard. The "DO" key is used as F10 to avoid conflict
# with the key marked (ESC) on the vt220. See vt220d for an alternate mapping.
# PF1--PF4 are used as F1--F4.
#
vt220-old|vt200-old|DEC VT220 in vt100 emulation mode:\
:am:bs:mi:pt:xn:xo:\
:co#80:li#24:vt#3:\
:@7=\E[4~:RA=\E[?7l:SA=\E[?7h:\
:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
:ae=4\E(B:al=\E[L:as=2\E(0:bl=^G:cd=50\E[J:ce=3\E[K:\
:cl=50\E[H\E[2J:cm=10\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
:dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:ho=\E[H:\
:if=/usr/share/tabset/vt100:im=\E[4h:\
:is=\E[1;24r\E[24;1H:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:\
:k5=\E[17~:k6=\E[18~:k7=\E[19~:k8=\E[20~:k9=\E[21~:\
:k;=\E[29~:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=^H:\
:kd=\E[B:kh=\E[1~:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mb=2\E[5m:\
:md=2\E[1m:me=2\E[m:mr=2\E[7m:nd=\E[C:nl=^J:rc=\E8:\
:rf=/usr/share/tabset/vt100:\
:rs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:sc=\E7:se=\E[27m:\
:sf=20\ED:so=\E[7m:sr=14\EM:ta=^I:ue=\E[24m:up=\E[A:\
:us=\E[4m:ve=\E[?25h:vi=\E[?25l:
# A much better description of the VT200/220; used to be vt220-8
# changed rmacs/smacs from shift-in/shift-out to vt200-old's explicit G0/G1
# designation to accommodate bug in pcvt -TD
# (sgr removed to fit entry within 1023 bytes)
# (acsc removed to fit entry within 1023 bytes)
vt220|vt200|dec vt220:\
:5i:am:bs:mi:ms:xn:xo:\
:co#80:it#8:li#24:vt#3:\
:%0=\E[29~:%1=\E[28~:*6=\E[4~:@0=\E[1~:AL=\E[%dL:\
:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:F1=\E[23~:F2=\E[24~:\
:F3=\E[25~:F4=\E[26~:F7=\E[31~:F8=\E[32~:F9=\E[33~:\
:FA=\E[34~:IC=\E[%d@:LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:\
:SA=\E[?7h:UP=\E[%dA:ae=4\E(B:al=\E[L:as=2\E(0:bl=^G:\
:cb=\E[1K:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:\
:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:\
:eA=\E)0:ec=\E[%dX:ei=\E[4l:ho=\E[H:\
:if=/usr/share/tabset/vt100:im=\E[4h:\
:is=\E[?7h\E[>\E[?1h\E F\E[?4l:k1=\EOP:k2=\EOQ:k3=\EOR:\
:k4=\EOS:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:\
:k;=\E[21~:kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=^H:kd=\E[B:\
:kl=\E[D:kr=\E[C:ku=\E[A:l1=pf1:l2=pf2:l3=pf3:l4=pf4:le=^H:\
:mb=\E[5m:md=\E[1m:me=2\E[0m:mr=\E[7m:nd=\E[C:nw=\EE:\
:pf=\E[4i:po=\E[5i:ps=\E[i:r1=\E[?3l:rc=\E8:sc=\E7:\
:se=\E[27m:sf=\ED:so=\E[7m:sr=\EM:st=\EH:ta=^I:ue=\E[24m:\
:up=\E[A:us=\E[4m:vb=\E[?5h\E[?5l:
vt220-w|vt200-w|DEC vt220 in wide mode:\
:co#132:\
:r3=\E[?3h:tc=vt220:
# (sgr removed to fit entry within 1023 bytes)
# (acsc removed to fit entry within 1023 bytes)
# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
vt220-8bit|vt220-8|vt200-8bit|vt200-8|dec vt220/200 in 8-bit mode:\
:am:bs:mi:ms:xn:xo:\
:co#80:it#8:li#24:vt#3:\
:AL=\233%dL:DC=\233%dP:DL=\233%dM:DO=\233%dB:IC=\233%d@:\
:LE=\233%dD:RI=\233%dC:UP=\233%dA:ae=\E(B:al=\233L:\
:as=\E(0:bl=^G:cd=\233J:ce=\233K:cl=\233H\233J:\
:cm=\233%i%d;%dH:cr=^M:cs=\233%i%d;%dr:ct=\2333g:\
:dc=\233P:dl=\233M:do=^J:ec=\233%dX:ei=\2334l:ho=\233H:\
:if=/usr/share/tabset/vt100:im=\2334h:\
:is=\233?7h\233>\233?1h\E F\233?4l:k1=\EOP:k2=\EOQ:\
:k3=\EOR:k4=\EOS:k6=\23317~:k7=\23318~:k8=\23319~:\
:k9=\23320~:kI=\2332~:kN=\2336~:kP=\2335~:kb=^H:kd=\233B:\
:kh=\233H:kl=\233D:kr=\233C:ku=\233A:le=^H:mb=\2335m:\
:md=\2331m:me=2\2330m:mr=\2337m:nd=\233C:nw=\EE:rc=\E8:\
:sc=\E7:se=\23327m:sf=\ED:so=\2337m:sr=\EM:st=\EH:ta=^I:\
:ue=\23324m:up=\233A:us=\2334m:vb=\233?5h\233?5l:
# vt220d:
# This vt220 description regards F6--F10 as the second block of function keys
# at the top of the keyboard. This mapping follows the description given
# in the VT220 Programmer Reference Manual and agrees with the labeling
# on some terminals that emulate the vt220. There is no support for an F5.
# See vt220 for an alternate mapping.
#
vt220d|DEC VT220 in vt100 mode with DEC function key labeling:\
:F1=\E[23~:F2=\E[24~:F3=\E[25~:F4=\E[26~:F5=\E[28~:\
:F6=\E[29~:F7=\E[31~:F8=\E[32~:F9=\E[33~:FA=\E[34~:k5@:\
:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:k;=\E[21~:\
:tc=vt220-old:
vt220-nam|v200-nam|VT220 in vt100 mode with no auto margins:\
:am@:\
:rs=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h:tc=vt220:
# vt220 termcap written Tue Oct 25 20:41:10 1988 by Alex Latzko
# (not an official DEC entry!)
# The problem with real vt220 terminals is they don't send escapes when in
# in vt220 mode. This can be gotten around two ways. 1> don't send
# escapes or 2> put the vt220 into vt100 mode and use all the nifty
# features of vt100 advanced video which it then has.
#
# This entry takes the view of putting a vt220 into vt100 mode so
# you can use the escape key in emacs and everything else which needs it.
#
# You probably don't want to use this on a VMS machine since VMS will think
# it has a vt220 and will get fouled up coming out of emacs
#
# From: Alexander Latzko <latzko@marsenius.rutgers.edu>, 30 Dec 1996
# (Added vt100 :rc:,:sc: to quiet a tic warning -- esr)
vt200-js|vt220-js|dec vt200 series with jump scroll:\
:am:\
:co#80:\
:al=\E[L:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:\
:cr=^M:cs=\E[%i%d;%dr:dc=\E[P:dl=\E[M:dm=:do=^J:ed=:\
:ei=\E[4l:ho=\E[H:im=\E[4h:\
:is=\E[61"p\E[H\E[?3l\E[?4l\E[?1l\E[?5l\E[?6l\E[?7h\E[?8h\E[?25h\E>\E[m:\
:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:kb=^H:kd=\EOB:\
:ke=\E[?1l\E>:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:\
:nd=\E[C:nw=^M\ED:r1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:\
:rc=\E8:rf=/usr/share/tabset/vt100:sc=\E7:se=5\E[27m:\
:sf=\ED:so=5\E[7m:sr=\EM:ta=^I:ue=\E[24m:up=\E[A:us=\E[4m:
# This was DEC's vt320. Use the purpose-built one below instead
#vt320|DEC VT320 in vt100 emulation mode,
# use=vt220,
# Use v320n for SCO's LYRIX. Otherwise, use Adam Thompson's vt320-nam.
#
vt320nam|v320n|DEC VT320 in vt100 emul. mode with NO AUTO WRAP mode:\
:am@:\
:rs=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h:tc=vt220:
# These entries are not DEC's official ones, they were purpose-built for the
# VT320. Here are the designer's notes:
# <kel> is end on a PC kbd. Actually 'select' on a VT. Mapped to
# 'Erase to End of Field'... since nothing seems to use 'end' anyways...
# khome is Home on a PC kbd. Actually 'FIND' on a VT.
# Things that use <knxt> usually use tab anyways... and things that don't use
# tab usually use <knxt> instead...
# kprv is same as tab - Backtab is useless...
# I left out :sa: because of its RIDICULOUS complexity,
# and the resulting fact that it causes the termcap translation of the entry
# to SMASH the 1k-barrier...
# From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
# (vt320: uncommented :fs: --esr)
# (sgr removed to fit entry within 1023 bytes)
# (acsc removed to fit entry within 1023 bytes)
# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
vt320|vt300|dec vt320 7 bit terminal:\
:am:es:hs:mi:ms:xn:\
:co#80:li#24:ws#80:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:ae=\E(B:al=\E[L:as=\E(0:\
:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:\
:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:ec=\E[%dX:\
:ei=\E[4l:fs=\E[0$}:ho=\E[H:im=\E[4h:\
:is=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H:\
:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:kD=\E[3~:\
:kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=\177:kd=\EOB:ke=\E[?1l\E>:\
:kh=\E[1~:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:\
:mb=\E[5m:md=\E[1m:me=2\E[0m:mr=\E[7m:nd=\E[C:nw=\EE:\
:rc=\E8:\
:rs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H:\
:sc=\E7:se=\E[m:sf=\ED:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
:ts=\E[1$}\E[H\E[K:ue=\E[m:up=\E[A:us=\E[4m:ve=\E[?25h:\
:vi=\E[?25l:tc=vt220+keypad:
vt320-nam|vt300-nam|dec vt320 7 bit terminal with no am to make SAS happy:\
:am@:\
:is=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H:\
:rs=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H:\
:tc=vt320:
# We have to init 132-col mode, not 80-col mode.
vt320-w|vt300-w|dec vt320 wide 7 bit terminal:\
:co#132:ws#132:\
:is=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H:\
:rs=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H:\
:tc=vt320:
vt320-w-nam|vt300-w-nam|dec vt320 wide 7 bit terminal with no am:\
:am@:\
:is=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H:\
:rs=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H:\
:tc=vt320-w:
# VT330 and VT340 -- These are ReGIS and SIXEL graphics terminals
# which are pretty much a superset of the VT320. They have the
# host writable status line, yet another different DRCS matrix size,
# and such, but they add the DEC Technical character set, Multiple text
# pages, selectable length pages, and the like. The difference between
# the vt330 and vt340 is that the latter has only 2 planes and a monochrome
# monitor, the former has 4 planes and a color monitor. These terminals
# support VT131 and ANSI block mode, but as with much of these things,
# termcap/terminfo doesn't deal with these features.
#
# Note that this entry is are set up in what was the standard way for GNU
# Emacs v18 terminal modes to deal with the cursor keys in that the arrow
# keys were switched into application mode at the same time the numeric pad
# is switched into application mode. This changes the definitions of the
# arrow keys. Emacs v19 is smarter and mines its keys directly out of
# your termcap or terminfo entry,
#
# From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
# (vt340: string capability "sb=\E[M" corrected to "sr";
# also, added <rmam>/<smam> based on the init string -- esr)
vt340|dec-vt340|vt330|dec-vt330|dec vt340 graphics terminal with 24 line page:\
:am:es:hs:mi:ms:xn:xo:\
:co#80:it#8:li#24:vt#3:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
:LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:UP=\E[%dA:\
:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
:ae=\E(B:al=\E[L:as=\E(0:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\
:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:\
:dl=\E[M:do=^J:ds=\E[2$~\r\E[1$}\E[K\E[$}:ei=\E[4l:\
:fs=\E[$}:ho=\E[H:im=\E[4h:\
:is=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H:\
:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k6=\E[17~:k7=\E[18~:\
:k8=\E[19~:k9=\E[20~:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:\
:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:l1=pf1:l2=pf2:l3=pf3:l4=pf4:\
:le=^H:mb=\E[5m:md=\E[1m:me=2\E[0m:mr=\E[7m:nd=\E[C:\
:nw=^M\ED:r1=\E[?3l:rc=\E8:rf=/usr/share/tabset/vt300:\
:sc=\E7:se=\E[27m:sf=\ED:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
:ts=\E[2$~\E[1$}\E[1;%dH:ue=\E[24m:up=\E[A:us=\E[4m:\
:vb=200\E[?5h\E[?5l:ve=\E[?25h:vi=\E[?25l:
# DEC doesn't supply a vt400 description, so we add Daniel Glasser's
# (originally written with vt420 as its primary name, and usable for it).
#
# VT400/420 -- This terminal is a superset of the vt320. It adds the multiple
# text pages and long text pages with selectable length of the vt340, along
# with left and right margins, rectangular area text copy, fill, and erase
# operations, selected region character attribute change operations,
# page memory and rectangle checksums, insert/delete column, reception
# macros, and other features too numerous to remember right now. TERMCAP
# can only take advantage of a few of these added features.
#
# Note that this entry is are set up in what was the standard way for GNU
# Emacs v18 terminal modes to deal with the cursor keys in that the arrow
# keys were switched into application mode at the same time the numeric pad
# is switched into application mode. This changes the definitions of the
# arrow keys. Emacs v19 is smarter and mines its keys directly out of
# your termcap entry,
#
# From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
# (vt400: string capability ":sb=\E[M:" corrected to ":sr=\E[M:";
# also, added <rmam>/<smam> based on the init string -- esr)
vt400|vt400-24|dec-vt400|dec vt400 24x80 column autowrap:\
:am:es:hs:mi:ms:xn:xo:\
:co#80:it#8:li#24:vt#3:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
:LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:UP=\E[%dA:\
:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
:ae=\E(B:al=\E[L:as=\E(0:cd=10\E[J:ce=4\E[K:cl=10\E[H\E[J:\
:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:\
:dl=\E[M:do=^J:ds=\E[2$~\r\E[1$}\E[K\E[$}:ei=\E[4l:\
:fs=\E[$}:ho=\E[H:ic=\E[@:im=\E[4h:\
:is=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H:\
:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k6=\E[17~:k7=\E[18~:\
:k8=\E[19~:k9=\E[20~:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:\
:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:l1=pf1:l2=pf2:l3=pf3:l4=pf4:\
:le=^H:mb=\E[5m:md=\E[1m:me=2\E[0m:mr=\E[7m:nd=\E[C:\
:nw=^M\ED:r1=\E<\E[?3l\E[!p\E[?7h:rc=\E8:\
:rf=/usr/share/tabset/vt300:sc=\E7:se=\E[27m:sf=\ED:\
:so=\E[7m:sr=\EM:st=\EH:ta=^I:ts=\E[2$~\E[1$}\E[1;%dH:\
:ue=\E[24m:up=\E[A:us=\E[4m:vb=200\E[?5h\E[?5l:\
:ve=\E[?25h:vi=\E[?25l:
# (vt420: I removed :k0:, it collided with <kf10>. I also restored
# a missing :sc: -- esr)
vt420|DEC VT420:\
:am:mi:xn:xo:\
:co#80:li#24:vt#3:\
:*6=\E[4~:@0=\E[1~:RA=\E[?7l:\
:S5=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:\
:SA=\E[?7h:\
:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
:ae=4\E(B:al=\E[L:as=2\E(0:bl=^G:cd=50\E[J:ce=3\E[K:\
:cl=50\E[H\E[2J:cm=10\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
:dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:ho=\E[H:\
:i2=\E[?67h\E[64;1"p:if=/usr/share/tabset/vt300:\
:im=\E[4h:is=\E[1;24r\E[24;1H:k1=\EOP:k2=\EOQ:k3=\EOR:\
:k4=\EOS:k5=\E[17~:k6=\E[18~:k7=\E[19~:k8=\E[20~:\
:k9=\E[21~:k;=\E[29~:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:\
:kb=^H:kd=\E[B:ke=\E>:kl=\E[D:kr=\E[C:ks=\E=:ku=\E[A:le=^H:\
:mb=2\E[5m:md=2\E[1m:me=2\E[m:mr=2\E[7m:nd=\E[C:\
:r3=\E[?67h\E[64;1"p:rc=\E8:rf=/usr/share/tabset/vt300:\
:sc=\E7:se=\E[m:sf=\ED:so=\E[7m:sr=\EM:ta=^I:ue=\E[m:\
:up=\E[A:us=\E[4m:
# DEC VT220 and up support DECUDK (user-defined keys). DECUDK (i.e., pfx)
# takes two parameters, the key and the string. Translating the key is
# straightforward (keys 1-5 are not defined on real terminals, though some
# emulators define these):
#
# if (key < 16) then value = key;
# else if (key < 21) then value = key + 1;
# else if (key < 25) then value = key + 2;
# else if (key < 27) then value = key + 3;
# else if (key < 30) then value = key + 4;
# else value = key + 5;
#
# The string must be the hexadecimal equivalent, e.g., "5052494E" for "PRINT".
# There's no provision in terminfo for emitting a string in this format, so the
# application has to know it.
#
vt420pc|DEC VT420 w/PC keyboard:\
:@7=\E[4~:F1=\E[23~:F2=\E[24~:F3=\E[11;2~:F4=\E[12;2~:\
:F5=\E[13;2~:F6=\E[14;2~:F7=\E[15;2~:F8=\E[17;2~:\
:F9=\E[18;2~:FA=\E[19;2~:FB=\E[20;2~:FC=\E[21;2~:\
:FD=\E[23;2~:FE=\E[24;2~:FF=\E[23~:FG=\E[24~:FH=\E[25~:\
:FI=\E[26~:FJ=\E[28~:FK=\E[29~:FL=\E[31~:FM=\E[32~:\
:FN=\E[33~:FO=\E[34~:FP=\E[35~:FQ=\E[36~:FR=\E[23;2~:\
:FS=\E[24;2~:FT=\E[25;2~:FU=\E[26;2~:FV=\E[28;2~:\
:FW=\E[29;2~:FX=\E[31;2~:FY=\E[32;2~:FZ=\E[33;2~:\
:Fa=\E[34;2~:Fb=\E[35;2~:Fc=\E[36;2~:\
:S6=USR_TERM\072vt420pcdos\072:k1=\E[11~:k2=\E[12~:\
:k3=\E[13~:k4=\E[14~:k5=\E[15~:k6=\E[17~:k7=\E[18~:\
:k8=\E[19~:k9=\E[20~:k;=\E[21~:kD=\177:kh=\E[H:tc=vt420:
vt420pcdos|DEC VT420 w/PC for DOS Merge:\
:li#25:\
:S4=\E[?1;2r\E[34h:\
:S5=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:S6@:\
:me=\E[m:sa@:tc=vt420pc:
vt420f|DEC VT420 with VT kbd; VT400 mode; F1-F5 used as Fkeys:\
:F1=\E[23~:F2=\E[24~:F3=\E[25~:F4=\E[26~:F5=\E[28~:\
:F6=\E[29~:F7=\E[31~:F8=\E[32~:F9=\E[33~:FA=\E[34~:\
:k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~:k5=\E[15~:\
:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:k;=\E[21~:\
:kD=\177:kh=\E[H:l1=\EOP:l2=\EOQ:l3=\EOR:l4=\EOS:tc=vt420:
vt510|DEC VT510:\
:tc=vt420:
vt510pc|DEC VT510 w/PC keyboard:\
:tc=vt420pc:
vt510pcdos|DEC VT510 w/PC for DOS Merge:\
:tc=vt420pcdos:
# VT520/VT525
#
# The VT520 is a monochrome text terminal capable of managing up to
# four independent sessions in the terminal. It has multiple ANSI
# emulations (VT520, VT420, VT320, VT220, VT100, VT PCTerm, SCO Console)
# and ASCII emulations (WY160/60, PCTerm, 50/50+, 150/120, TVI 950,
# 925 910+, ADDS A2). This terminfo data is for the ANSI emulations only.
#
# Terminal Set-Up is entered by pressing [F3], [Caps Lock]/[F3] or
# [Alt]/[Print Screen] depending upon which keyboard and which
# terminal mode is being used. If Set-Up has been disabled or
# assigned to an unknown key, Set-Up may be entered by pressing
# [F3] as the first key after power up, regardless of keyboard type.
# (vt520: I added <rmam>/<smam> based on the init string, also :sc: -- esr)
vt520|DEC VT520:\
:am:mi:xn:xo:\
:co#80:li#24:vt#3:\
:*6=\E[4~:@0=\E[1~:RA=\E[?7l:\
:S5=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:\
:SA=\E[?7h:\
:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
:ae=4\E(B:al=\E[L:as=2\E(0:bl=^G:cd=50\E[J:ce=3\E[K:\
:cl=50\E[H\E[2J:cm=10\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
:dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:ho=\E[H:\
:i2=\E[?67h\E[64;1"p:if=/usr/share/tabset/vt300:\
:im=\E[4h:is=\E[1;24r\E[24;1H:k1=\EOP:k2=\EOQ:k3=\EOR:\
:k4=\EOS:k5=\E[17~:k6=\E[18~:k7=\E[19~:k8=\E[20~:\
:k9=\E[21~:k;=\E[29~:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:\
:kb=^H:kd=\E[B:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mb=2\E[5m:\
:md=2\E[1m:me=2\E[m:mr=2\E[7m:nd=\E[C:\
:r3=\E[?67h\E[64;1"p:rc=\E8:rf=/usr/share/tabset/vt300:\
:sc=\E7:se=\E[m:sf=\ED:so=\E[7m:sr=\EM:ta=^I:ue=\E[m:\
:up=\E[A:us=\E[4m:
# (vt525: I added <rmam>/<smam> based on the init string;
# removed :se:=\E[m, :ue:=\E[m, added :sc: -- esr)
vt525|DEC VT525:\
:am:mi:xn:xo:\
:co#80:li#24:vt#3:\
:*6=\E[4~:@0=\E[1~:RA=\E[?7l:\
:S5=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:\
:SA=\E[?7h:\
:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
:ae=4\E(B:al=\E[L:as=2\E(0:bl=^G:cd=50\E[J:ce=3\E[K:\
:cl=50\E[H\E[2J:cm=10\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
:dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:ho=\E[H:\
:i2=\E[?67h\E[64;1"p:if=/usr/share/tabset/vt300:\
:im=\E[4h:is=\E[1;24r\E[24;1H:k1=\EOP:k2=\EOQ:k3=\EOR:\
:k4=\EOS:k5=\E[17~:k6=\E[18~:k7=\E[19~:k8=\E[20~:\
:k9=\E[21~:k;=\E[29~:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:\
:kb=^H:kd=\E[B:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mb=2\E[5m:\
:md=2\E[1m:me=2\E[m:mr=2\E[7m:nd=\E[C:\
:r3=\E[?67h\E[64;1"p:rc=\E8:rf=/usr/share/tabset/vt300:\
:sc=\E7:se=\E[m:sf=\ED:so=\E[7m:sr=\EM:ta=^I:ue=\E[m:\
:up=\E[A:us=\E[4m:
#### VT100 emulations
#
# John Hawkinson <jhawk@MIT.EDU> tells us that the EWAN telnet for Windows
# (the best Windows telnet as of September 1995) presents the name `dec-vt100'
# to telnetd. Michael Deutschmann <ldeutsch@mail.netshop.net> informs us
# that this works best with a stock vt100 entry.
dec-vt100|EWAN telnet's vt100 emulation:\
:tc=vt100:
# From: Adrian Garside <94ajg2@eng.cam.ac.uk>, 19 Nov 1996
dec-vt220|DOS tnvt200 terminal emulator:\
:am@:tc=vt220:
# Zstem340 is an (IMHO) excellent VT emulator for PC's. I recommend it to
# anyone who needs PC VT340 emulation. (or anything below that level, for
# that matter -- DEC's ALL-in-1 seems happy with it, as does INFOPLUS's
# RDBM systems, it includes ReGIS and SiXel support! I'm impressed...
# I can send the address if requested.
# (z340: changed garbled \E[5?l to \E[?5l, DEC smooth scroll off -- esr)
# From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
z340|zstem vt340 terminal emulator 132col 42line:\
:li#42:\
:is=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H:\
:rs=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H:\
:tc=vt320-w:
z340-nam|zstem vt340 terminal emulator 132col 42line (no automatic margins):\
:am@:\
:is=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H:\
:rs=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H:\
:tc=z340:
# CRT is shareware. It implements some xterm features, including mouse.
crt|crt-vt220|CRT 2.3 emulating VT220:\
:ms:ut:\
:NC@:\
:st=\EH:tc=vt100+enq:tc=vt220:tc=ecma+color:
# PuTTY 0.55 (released 3 August 2004)
# http://www.chiark.greenend.org.uk/~sgtatham/putty/
#
# Comparing with 0.51, vttest is much better (only a few problems with the
# cursor position reports and wrapping).
#
# PuTTY 0.51 (released 14 December 2000)
#
# This emulates vt100 + vt52 (plus a few vt220 features: ech, SRM, DECTCEM, as
# well as SCO and Atari, color palettes from Linux console). Reading the code,
# it is intended to be VT102 plus selected features. By default, it sets $TERM
# to xterm, which is incorrect, since several features are misimplemented:
#
# Alt+key always sends ESC+key, so 'km' capability is removed.
#
# Control responses, wrapping and tabs are buggy, failing a couple of
# screens in vttest.
#
# xterm mouse support is not implemented (unrelease version may).
#
# Several features such as backspace/delete are optional; this entry documents
# the default behavior -TD
# (sgr removed to fit entry within 1023 bytes)
# (acsc removed to fit entry within 1023 bytes)
# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
putty|PuTTY terminal emulator:\
:am:bw:hs:mi:ms:xn:xo:\
:it#8:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:K2=\E[G:\
:LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:ae=^O:\
:al=\E[L:as=^N:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\
:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:\
:dl=\E[M:do=\ED:ds=\E]0;\007:ec=\E[%dX:ei=\E[4l:fs=^G:\
:ho=\E[H:im=\E[4h:\
:is=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>\E]R:\
:k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~:k5=\E[15~:\
:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:kD=\E[3~:\
:kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=\177:kd=\E[B:kh=\E[1~:\
:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[0m:\
:mr=\E[7m:nd=\E[C:nw=^M^J:rc=\E8:\
:rs=\E<\E["p\E[50;6"p\Ec\E[?3l\E]R\E[?1000l:sc=\E7:\
:se=\E[27m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
:te=\E[2J\E[?47l:ti=\E[?47h:ts=\E]0;:ue=\E[24m:up=\EM:\
:us=\E[4m:vb=\E[?5h\E[?5l:ve=\E[?25h:vi=\E[?25l:\
:tc=vt102+enq:
vt100-putty|Reset PuTTY to pure vt100:\
:rs=\E<\E["p\Ec\E[?3l\E]R\E[40"p\E[61"p\E[50;1;2"p:\
:tc=vt100:
# palette is hardcoded...
putty-256color|PuTTY 0.58 with xterm 256-colors:\
:Ic@:tc=xterm+256color:tc=putty:
# One of the keyboard selections is "VT100+".
# pterm (the X11 port) uses shifted F1-F10 as F11-F20
putty-vt100|VT100+ keyboard layout:\
:F1=\EOZ:F2=\EO[:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k5=\EOT:\
:k6=\EOU:k7=\EOV:k8=\EOW:k9=\EOX:k;=\EOY:tc=putty:
# This entry is for Tera Term Pro version 2.3, for MS-Windows 95/NT written by
# T. Teranishi dated Mar 10, 1998. It is a free software terminal emulator
# (communication program) which supports:
#
# - Serial port connections.
# - TCP/IP (telnet) connections.
# - VT100 emulation, and selected VT200/300 emulation.
# - TEK4010 emulation.
# - File transfer protocols (Kermit, XMODEM, ZMODEM, B-PLUS and
# Quick-VAN).
# - Scripts using the "Tera Term Language".
# - Japanese and Russian character sets.
#
# The program does not come with terminfo or termcap entries. However, the
# emulation (testing with vttest and ncurses) is reasonably close to vt100 (no
# vt52 or doublesize character support; blinking is done with color). Besides
# the HPA, VPA extensions it also implements CPL and CNL.
#
# All of the function keys can be remapped. This description shows the default
# mapping, as installed. Both vt100 PF1-PF4 keys and quasi-vt220 F1-F4 keys
# are supported. F13-F20 are obtained by shifting F3-F10. The editing keypad
# is laid out like vt220, rather than the face codes on the PC keyboard, i.e,
# kfnd Insert
# kslt Delete
# kich1 Home
# kdch1 PageUp
# kpp End
# knp PageDown
#
# ANSI colors are implemented, but cannot be combined with video attributes
# except for reverse.
#
# No fonts are supplied with the program, so the acsc string is chosen to
# correspond with the default Microsoft terminal font.
#
# Tera Term recognizes some xterm sequences, including those for setting and
# retrieving the window title, and for setting the window size (i.e., using
# "resize -s"), though it does not pass SIGWINCH to the application if the
# user resizes the window with the mouse.
teraterm2.3|Tera Term Pro:\
:km:xo@:\
:NC#43:vt@:\
:*6=\E[4~:@0=\E[1~:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:\
:F1=\E[23~:F2=\E[24~:F3=\E[25~:F4=\E[26~:F5=\E[28~:\
:F6=\E[29~:F7=\E[31~:F8=\E[32~:F9=\E[33~:FA=\E[34~:\
:ac=+\020,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376:\
:al=\E[L:cb=\E[1K:cd=\E[J:ce=\E[K:ch=\E[%i%dG:cl=\E[H\E[J:\
:cm=\E[%i%d;%dH:cv=\E[%i%dd:dc=\E[P:dl=\E[M:ec=\E[%dX:\
:k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~:k5=\E[15~:\
:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:k;=\E[21~:\
:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:mb=\E[5m:md=\E[1m:\
:me=\E[0m\017:mr=\E[7m:nd=\E[C:op=\E[100m:se=\E[27m:\
:so=\E[7m:sr=\EM:ue=\E[24m:up=\E[A:us=\E[4m:\
:vb=200\E[?5h\E[?5l:ve=\E[?25h:vi=\E[?25l:tc=vt100+enq:\
:tc=klone+color:tc=vt100:
# Version 4.59 has regular vt100 line-drawing (so it is no longer necessary
# to choose a Windows OEM font).
#
# Testing with tack:
# - it does not have xenl (suppress that)
# - underline seems to work with color (modify ncv).
# Testing with vttest:
# - wrapping differs from vt100 (menu 1).
# - it recognizes xterm's X10 and normal mouse tracking, but none of the
# other flavors.
# - it recognizes the dtterm window controls for reporting size in
# characters and pixels.
# - it passes SIGWINCH.
teraterm4.59|Tera Term Pro:\
:ut:xn@:\
:NC#41:\
:Km=\E[M:\
:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
:tc=teraterm2.3:
teraterm|Tera Term:\
:tc=teraterm4.59:
# Tested with WinNT 4.0, the telnet application assumes the screensize is
# 25x80. This entry uses the 'Terminal' font, to get line-drawing characters.
#
# Other notes:
# a) Fails tack's cup (cursor-addressing) test, though cup works well enough
# for casual (occasional) use. Also fails several of the vttest screens,
# but that is not unusual for vt100 "emulators".
# b) Does not implement vt100 keypad
# c) Recognizes a subset of vt52 controls.
ms-vt100|MS telnet imitating dec vt100:\
:li#25:\
:@8@:K1@:K2@:K3@:K4@:K5@:\
:ac=+\020,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376:\
:ct@:k0@:k1@:k2@:k3@:k4@:k5@:k6@:k7@:k8@:k9@:k;@:tc=vt102+enq:\
:tc=vt100:
# Tested with Windows 2000, the telnet application runs in a console window,
# also using 'Terminal' font.
#
# Other notes:
# a) This version has no function keys or numeric keypad. Unlike the older
# version, the numeric keypad is entirely ignored.
# b) The program sets $TERM to "ansi", which of course is inaccurate.
ms-vt100-color|vtnt|windows 2000 ansi (sic):\
:ut:\
:DC=\E[%dP:IC=\E[%d@:ei=:im=:tc=ecma+color:tc=ms-vt100:
# Based on comments from Federico Bianchi:
#
# vt100+ is basically a VT102-noSGR with ANSI.SYS colors and a different
# scheme for PF keys.
#
# and PuTTY wishlist:
#
# The modifiers are represented as the codes listed above, prefixed to
# the normal sequences. If the modifier is pressed alone, its sequence
# is transmitted twice in succession. If multiple modifiers apply,
# they're transmitted in the order shift, control, alt.
#
# Shift \E^S
# Alt \E^A,
# Ctrl \E^C,
ms-vt100+|vt100+|windows XP vt100+ (sic):\
:@7=\Ek:F1=\E!:F2=\E@:F3=\E\023\E1:F4=\E\023\E2:\
:F5=\E\023\E3:F6=\E\023\E4:F7=\E\023\E5:F8=\E\023\E6:\
:F9=\E\023\E7:FA=\E\023\E8:FB=\E\023\E9:FC=\E\023\E0:\
:FD=\E\023\E!:FE=\E\023\E@:FF=\E\003\E1:FG=\E\003\E2:\
:FH=\E\003\E3:FI=\E\003\E4:FJ=\E\003\E5:FK=\E\003\E6:\
:FL=\E\003\E7:FM=\E\003\E8:FN=\E\003\E9:FO=\E\003\E0:\
:FP=\E\003\E!:FQ=\E\003\E@:FR=\E\001\E1:FS=\E\001\E2:\
:FT=\E\001\E3:FU=\E\001\E4:FV=\E\001\E5:FW=\E\001\E6:\
:FX=\E\001\E7:FY=\E\001\E8:FZ=\E\001\E9:Fa=\E\001\E0:\
:Fb=\E\001\E!:Fc=\E\001\E@:k1=\E1:k2=\E2:k3=\E3:k4=\E4:\
:k5=\E5:k6=\E6:k7=\E7:k8=\E8:k9=\E9:k;=\E0:kD=\E-:kI=\E+:\
:kN=\E/:kP=\E?:kh=\Eh:tc=ms-vt100-color:
ms-vt-utf8|vt-utf8|UTF-8 flavor of vt100+:\
:tc=ms-vt100+:
# expect-5.44.1.15/example/tkterm
# a minimal subset of a vt100 (compare with "news-unk).
#
# The missing "=" in smkx is not a typo (here), but an error in tkterm.
tt|tkterm|Don Libes' tk text widget terminal emulator:\
:cl=\E[H\E[J:cm=\E[%d;%dH:cr=^M:do=^J:k1=\EOP:k2=\EOQ:\
:k3=\EOR:k4=\EOS:k5=\EOT:k6=\EOU:k7=\EOV:k8=\EOW:k9=\EOX:\
:ke=\E[?1l\E>:ks=\E[?1h\E:le=^H:nd=\E[C:se=\E[m:sf=^J:\
:so=\E[7m:up=\E[A:
######## X TERMINAL EMULATORS
#### XTERM
#
# You can add the following line to your .Xdefaults to change the terminal type
# set by the xterms you start up to my-xterm:
#
# *termName: my-xterm
#
# System administrators can change the default entry for xterm instances
# by adding a similar line to /usr/X11/lib/X11/app-defaults/XTerm. In either
# case, xterm will detect and reject an invalid terminal type, falling back
# to the default of xterm.
#
# X10/6.6 11/7/86, minus alternate screen, plus (csr)
# (xterm: ":MT:" changed to ":km:"; added <smam>/<rmam> based on init string;
# removed (hs, eslok, tsl=\E[?E\E[?%i%dT, fsl=\E[?F, dsl=\E[?E)
# as these seem not to work -- esr)
x10term|vs100-x10|xterm terminal emulator (X10 window system):\
:am:bs:km:mi:ms:xn:xo:\
:co#80:it#8:li#65:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:RA=\E[?7l:SA=\E[?7h:\
:al=\E[L:cd=\E[J:ce=\E[K:cl=\E[H\E[2J:cm=\E[%i%d;%dH:\
:cs=\E[%i%d;%dr:dc=\E[P:dl=\E[M:do=^J:ei=\E[4l:ho=\E[H:\
:im=\E[4h:is=\E\E[m\E[?7h\E[?1;4l:k1=\EOP:k2=\EOQ:\
:k3=\EOR:k4=\EOS:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:\
:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:md=\E[1m:me=\E[m:\
:mr=\E[7m:nd=\E[C:se=\E[m:sf=^J:so=\E[7m:sr=\EM:ta=^I:\
:ue=\E[m:up=\E[A:us=\E[4m:
# Compatible with the R5 xterm
# (from the XFree86 3.2 distribution, <blink=@> removed)
# added khome/kend, rmir/smir, rmul/smul, hts based on the R5 xterm code - TD
# corrected typos in rs2 string - TD
# added u6-u9 -TD
xterm-r5|xterm R5 version:\
:am:bs:km:ms:xn:\
:co#80:it#8:li#24:\
:@7=\E[4~:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:\
:F1=\E[23~:F2=\E[24~:IC=\E[%d@:Km=\E[M:LE=\E[%dD:\
:RI=\E[%dC:UP=\E[%dA:al=\E[L:bl=^G:cd=\E[J:ce=\E[K:\
:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:ei=\E[4l:ho=\E[H:ic=\E[@:\
:im=\E[4h:k0=\EOq:k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~:\
:k5=\E[15~:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:\
:k;=\E[21~:kA=\E[30~:kD=\E[3~:kE=\E[8~:kI=\E[2~:kL=\E[31~:\
:kN=\E[6~:kP=\E[5~:kb=^H:kd=\EOB:ke=\E[?1l\E>:kh=\E[1~:\
:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:md=\E[1m:\
:me=\E[m:mr=\E[7m:nd=\E[C:rc=\E8:\
:rs=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H:\
:sc=\E7:se=\E[m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:ue=\E[m:\
:up=\E[A:us=\E[4m:tc=vt100+enq:
# Compatible with the R6 xterm
# (from XFree86 3.2 distribution, <acsc> and :it: added, <blink@> removed)
# added khome/kend, hts based on the R6 xterm code - TD
# (khome/kend do not actually work in X11R5 or X11R6, but many people use this
# for compatibility with other emulators).
xterm-r6|xterm-old|xterm X11R6 version:\
:am:bs:km:mi:ms:xn:\
:co#80:it#8:li#24:\
:*6=\E[4~:@0=\E[1~:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:\
:DO=\E[%dB:F1=\E[23~:F2=\E[24~:F3=\E[25~:F4=\E[26~:\
:F5=\E[28~:F6=\E[29~:F7=\E[31~:F8=\E[32~:F9=\E[33~:\
:FA=\E[34~:Km=\E[M:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:\
:ac=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
:ae=^O:al=\E[L:as=^N:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[2J:\
:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:\
:dl=\E[M:do=^J:eA=\E)0:ei=\E[4l:ho=\E[H:im=\E[4h:\
:is=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8:\
:k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~:k5=\E[15~:\
:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:k;=\E[21~:\
:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=^H:kd=\EOB:\
:ke=\E[?1l\E>:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:\
:md=\E[1m:me=\E[m:ml=\El:mr=\E[7m:mu=\Em:nd=\E[C:rc=\E8:\
:rs=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8:sc=\E7:\
:se=\E[m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
:te=\E[2J\E[?47l\E8:ti=\E7\E[?47h:ue=\E[m:up=\E[A:\
:us=\E[4m:tc=vt100+enq:
# This is the base xterm entry for the xterm supplied with XFree86 3.2 & up.
# The name has been changed and some aliases have been removed.
# (sgr removed to fit entry within 1023 bytes)
# (acsc removed to fit entry within 1023 bytes)
# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
xterm-xf86-v32|xterm terminal emulator (XFree86 3.2 Window System):\
:am:bs:km:mi:ms:xn:\
:co#80:it#8:li#24:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:ae=^O:al=\E[L:as=^N:bl=^G:\
:bt=\E[Z:cd=\E[J:ce=\E[K:cl=\E[H\E[2J:cm=\E[%i%d;%dH:\
:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:\
:ec=\E[%dX:ei=\E[4l:ho=\E[H:ic=\E[@:im=\E[4h:\
:is=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>:\
:k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~:k5=\E[15~:\
:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:kD=\177:kI=\E[2~:\
:kN=\E[6~:kP=\E[5~:kb=^H:kd=\EOB:ke=\E[?1l\E>:kh=\EOH:\
:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:md=\E[1m:\
:me=\E[0m:mr=\E[7m:nd=\E[C:rc=\E8:sc=\E7:se=\E[27m:sf=^J:\
:so=\E[7m:sr=\EM:st=\EH:ta=^I:te=\E[2J\E[?47l\E8:\
:ti=\E7\E[?47h:ue=\E[24m:up=\E[A:us=\E[4m:\
:vb=\E[?5h\E[?5l:ve=\E[?25h:vi=\E[?25l:tc=vt100+enq:\
:tc=ecma+color:tc=vt220+keypad:
# This is the stock xterm entry supplied with XFree86 3.3, which uses VT100
# codes for F1-F4 except while in VT220 mode.
xterm-xf86-v33|xterm terminal emulator (XFree86 3.3 Window System):\
:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:tc=xterm-xf86-v32:
# This version was released in XFree86 3.3.3 (November 1998).
# Besides providing printer support, it exploits a new feature that allows
# xterm to use terminfo-based descriptions with the titeInhibit resource.
# -- the distribution contained incorrect khome/kend values -TD
xterm-xf86-v333|xterm terminal emulator (XFree86 3.3.3 Window System):\
:5i:\
:*6@:@0@:ic@:is=\E[!p\E[?3;4l\E[4l\E>:kD=\E[3~:mb=\E[5m:\
:mk=\E[8m:pf=\E[4i:po=\E[5i:ps=\E[i:r1=\Ec:\
:r2=\E[!p\E[?3;4l\E[4l\E>:te=\E[?1047l\E[?1048l:\
:ti=\E[?1048h\E[?1047h:tc=xterm-xf86-v33:
# This version was released in XFree86 4.0.
xterm-xf86-v40|xterm terminal emulator (XFree86 4.0 Window System):\
:NP:\
:#2=\EO5H:#3=\E[2;5~:#4=\EO5D:%c=\E[6;5~:%e=\E[5;5~:\
:%i=\EO5C:*4=\E[3;5~:*7=\EO5F:@7=\EOF:F3=\EO2P:F4=\EO2Q:\
:F5=\EO2R:F6=\EO2S:F7=\E[15;2~:F8=\E[17;2~:F9=\E[18;2~:\
:FA=\E[19;2~:FB=\E[20;2~:FC=\E[21;2~:FD=\E[23;2~:\
:FE=\E[24;2~:FF=\EO5P:FG=\EO5Q:FH=\EO5R:FI=\EO5S:\
:FJ=\E[15;5~:FK=\E[17;5~:FL=\E[18;5~:FM=\E[19;5~:\
:FN=\E[20;5~:FO=\E[21;5~:FP=\E[23;5~:FQ=\E[24;5~:\
:FR=\EO6P:FS=\EO6Q:FT=\EO6R:FU=\EO6S:FV=\E[15;6~:\
:FW=\E[17;6~:FX=\E[18;6~:FY=\E[19;6~:FZ=\E[20;6~:\
:Fa=\E[21;6~:Fb=\E[23;6~:Fc=\E[24;6~:K1@:K2=\EOE:K3@:K4@:\
:K5@:kB=\E[Z:kD=\E[3~:kh=\EOH:te=\E[?1049l:ti=\E[?1049h:\
:tc=xterm-xf86-v333:
# This version was released in XFree86 4.3.
xterm-xf86-v43|xterm terminal emulator (XFree86 4.3 Window System):\
:#2=\E[1;2H:#3=\E[2;2~:#4=\E[1;2D:%c=\E[6;2~:%e=\E[5;2~:\
:%i=\E[1;2C:*4=\E[3;2~:*7=\E[1;2F:@1@:tc=xterm-xf86-v40:
# This version was released in XFree86 4.4.
xterm-xf86-v44|xterm terminal emulator (XFree86 4.4 Window System):\
:SF=\E[%dS:SR=\E[%dT:ve=\E[?12l\E[?25h:vs=\E[?12;25h:\
:tc=xterm-xf86-v43:
xterm-xfree86|xterm terminal emulator (XFree86):\
:tc=xterm-xf86-v44:
# This version reflects the current xterm features.
xterm-new|modern xterm terminal emulator:\
:NP:\
:@8=\EOM:K2=\EOE:SF=\E[%dS:SR=\E[%dT:kB=\E[Z:\
:tc=xterm+pcfkeys:tc=xterm+tmux:tc=xterm-basic:
#
# This fragment describes as much of XFree86 xterm's "pc-style" function
# keys as will fit into terminfo's 60 function keys.
# From ctlseqs.ms:
# Code Modifiers
# ---------------------------------
# 2 Shift
# 3 Alt
# 4 Shift + Alt
# 5 Control
# 6 Shift + Control
# 7 Alt + Control
# 8 Shift + Alt + Control
# ---------------------------------
# The meta key may also be used as a modifier in this scheme, adding another
# bit to the parameter.
xterm+pcfkeys|fragment for PC-style fkeys:\
:tc=xterm+app:tc=xterm+pcf2:tc=xterm+pcc2:tc=xterm+pce2:
#
xterm+noapp|fragment with cursor keys in normal mode:\
:@7=\E[F:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:
xterm+app|fragment with cursor keys in application mode:\
:@7=\EOF:kd=\EOB:kh=\EOH:kl=\EOD:kr=\EOC:ku=\EOA:
#
# The "PC-style" modifier scheme was introduced in xterm patch #94 (1999/3/27)
# and revised in patch #167 (2002/8/24). Some other terminal emulators copied
# the earlier scheme, as noted in the "use=" clauses in this file.
#
# The original assignments from patch #94 for cursor-keys had some technical
# issues:
#
# A parameter for a function-key to represent a modifier is just more
# bits. But for a cursor-key it may change the behavior of the
# application. For instance, emacs decodes the first parameter of a
# cursor-key as a repeat count.
#
# A parameterized string should (really) not begin with SS3 (\EO).
# Rather, CSI (\E[) should be used.
#
# For these reasons, the original assignments were deprecated. For
# compatibility reasons, they are still available as a setting of xterm's
# modifyCursorKeys resource. These fragments list the modified cursor-keys
# that might apply to xterm+pcfkeys with different values of that resource.
xterm+pcc3|fragment with modifyCursorKeys=3:\
:#4=\E[>1;2D:%i=\E[>1;2C:kF=\E[>1;2B:kR=\E[>1;2A:
xterm+pcc2|fragment with modifyCursorKeys=2:\
:#4=\E[1;2D:%i=\E[1;2C:kF=\E[1;2B:kR=\E[1;2A:
xterm+pcc1|fragment with modifyCursorKeys=1:\
:#4=\E[2D:%i=\E[2C:kF=\E[2B:kR=\E[2A:
xterm+pcc0|fragment with modifyCursorKeys=0:\
:#4=\EO2D:%i=\EO2C:kF=\EO2B:kR=\EO2A:
#
# Here are corresponding fragments from xterm patch #216:
#
xterm+pcf0|fragment with modifyFunctionKeys=0:\
:F1=\E[23~:F2=\E[24~:F3=\EO2P:F4=\EO2Q:F5=\EO2R:F6=\EO2S:\
:F7=\E[15;2~:F8=\E[17;2~:F9=\E[18;2~:FA=\E[19;2~:\
:FB=\E[20;2~:FC=\E[21;2~:FD=\E[23;2~:FE=\E[24;2~:\
:FF=\EO5P:FG=\EO5Q:FH=\EO5R:FI=\EO5S:FJ=\E[15;5~:\
:FK=\E[17;5~:FL=\E[18;5~:FM=\E[19;5~:FN=\E[20;5~:\
:FO=\E[21;5~:FP=\E[23;5~:FQ=\E[24;5~:FR=\EO6P:FS=\EO6Q:\
:FT=\EO6R:FU=\EO6S:FV=\E[15;6~:FW=\E[17;6~:FX=\E[18;6~:\
:FY=\E[19;6~:FZ=\E[20;6~:Fa=\E[21;6~:Fb=\E[23;6~:\
:Fc=\E[24;6~:Fd=\EO3P:Fe=\EO3Q:Ff=\EO3R:Fg=\EO3S:\
:Fh=\E[15;3~:Fi=\E[17;3~:Fj=\E[18;3~:Fk=\E[19;3~:\
:Fl=\E[20;3~:Fm=\E[21;3~:Fn=\E[23;3~:Fo=\E[24;3~:\
:Fp=\EO4P:Fq=\EO4Q:Fr=\EO4R:k1=\EOP:k2=\EOQ:k3=\EOR:\
:k4=\EOS:k5=\E[15~:k6=\E[17~:k7=\E[18~:k8=\E[19~:\
:k9=\E[20~:k;=\E[21~:
#
xterm+pcf2|fragment with modifyFunctionKeys=2:\
:F1=\E[23~:F2=\E[24~:F3=\E[1;2P:F4=\E[1;2Q:F5=\E[1;2R:\
:F6=\E[1;2S:F7=\E[15;2~:F8=\E[17;2~:F9=\E[18;2~:\
:FA=\E[19;2~:FB=\E[20;2~:FC=\E[21;2~:FD=\E[23;2~:\
:FE=\E[24;2~:FF=\E[1;5P:FG=\E[1;5Q:FH=\E[1;5R:FI=\E[1;5S:\
:FJ=\E[15;5~:FK=\E[17;5~:FL=\E[18;5~:FM=\E[19;5~:\
:FN=\E[20;5~:FO=\E[21;5~:FP=\E[23;5~:FQ=\E[24;5~:\
:FR=\E[1;6P:FS=\E[1;6Q:FT=\E[1;6R:FU=\E[1;6S:FV=\E[15;6~:\
:FW=\E[17;6~:FX=\E[18;6~:FY=\E[19;6~:FZ=\E[20;6~:\
:Fa=\E[21;6~:Fb=\E[23;6~:Fc=\E[24;6~:Fd=\E[1;3P:\
:Fe=\E[1;3Q:Ff=\E[1;3R:Fg=\E[1;3S:Fh=\E[15;3~:\
:Fi=\E[17;3~:Fj=\E[18;3~:Fk=\E[19;3~:Fl=\E[20;3~:\
:Fm=\E[21;3~:Fn=\E[23;3~:Fo=\E[24;3~:Fp=\E[1;4P:\
:Fq=\E[1;4Q:Fr=\E[1;4R:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:\
:k5=\E[15~:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:\
:k;=\E[21~:
#
# Chunks from xterm #230:
xterm+pce2|fragment with modifyCursorKeys=2:\
:#2=\E[1;2H:#3=\E[2;2~:%c=\E[6;2~:%e=\E[5;2~:*4=\E[3;2~:\
:*7=\E[1;2F:kI=\E[2~:kN=\E[6~:kP=\E[5~:tc=xterm+edit:
xterm+edit|fragment for 6-key editing-keypad:\
:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:tc=xterm+pc+edit:
xterm+pc+edit|fragment for pc-style editing keypad:\
:@7=\E[4~:kh=\E[1~:
xterm+vt+edit|fragment for vt220-style editing keypad:\
:*6=\E[4~:@0=\E[1~:
#
# Those chunks use the new-style (the xterm oldFunctionKeys resource is false).
# Alternatively, the same scheme with old-style function keys as in xterm-r6
# is shown here (because that is used in mrxvt and mlterm):
xterm+r6f2|xterm with oldFunctionKeys and modifyFunctionKeys=2:\
:F3=\E[11;2~:F4=\E[12;2~:F5=\E[13;2~:F6=\E[14;2~:\
:FF=\E[11;5~:FG=\E[12;5~:FH=\E[13;5~:FI=\E[14;5~:\
:FR=\E[11;6~:FS=\E[12;6~:FT=\E[13;6~:FU=\E[14;6~:\
:Fd=\E[11;3~:Fe=\E[12;3~:Ff=\E[13;3~:Fg=\E[14;3~:\
:Fp=\E[11;4~:Fq=\E[12;4~:Fr=\E[13;4~:k1=\E[11~:k2=\E[12~:\
:k3=\E[13~:k4=\E[14~:tc=xterm+pcf2:
#
# This chunk is used for building the VT220/Sun/PC keyboard variants.
xterm-basic|modern xterm terminal emulator - common:\
:5i:am:bs:km:mi:ms:ut:xn:AX:\
:Co#8:co#80:it#8:li#24:pa#64:\
:AB=\E[4%dm:AF=\E[3%dm:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:\
:DO=\E[%dB:IC=\E[%d@:Km=\E[M:LE=\E[%dD:RA=\E[?7l:\
:RI=\E[%dC:SA=\E[?7h:UP=\E[%dA:\
:ac=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
:ae=\E(B:al=\E[L:as=\E(0:bl=^G:bt=\E[Z:cb=\E[1K:cd=\E[J:\
:ce=\E[K:ch=\E[%i%dG:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:\
:cs=\E[%i%d;%dr:ct=\E[3g:cv=\E[%i%dd:dc=\E[P:dl=\E[M:\
:do=^J:ec=\E[%dX:ei=\E[4l:ho=\E[H:im=\E[4h:\
:is=\E[!p\E[?3;4l\E[4l\E>:kb=^H:ke=\E[?1l\E>:\
:ks=\E[?1h\E=:le=^H:mb=\E[5m:md=\E[1m:me=\E[0m:mk=\E[8m:\
:ml=\El:mm=\E[?1034h:mo=\E[?1034l:mr=\E[7m:mu=\Em:nd=\E[C:\
:op=\E[39;49m:pf=\E[4i:po=\E[5i:ps=\E[i:r1=\Ec:\
:r2=\E[!p\E[?3;4l\E[4l\E>:rc=\E8:sc=\E7:se=\E[27m:sf=^J:\
:so=\E[7m:sr=\EM:st=\EH:ta=^I:te=\E[?1049l:ti=\E[?1049h:\
:ue=\E[24m:up=\E[A:us=\E[4m:vb=\E[?5h\E[?5l:\
:ve=\E[?12l\E[?25h:vi=\E[?25l:vs=\E[?12;25h:\
:tc=vt100+enq:
# From: David J. MacKenzie <djm@va.pubnix.com>, 14 Nov 1997
# In retrospect, something like xterm-r6 was intended here -TD
xterm-xi|xterm on XI Graphics Accelerated X under BSD/OS 3.1:\
:se=\E[m:ue=\E[m:tc=xterm-xf86-v33:
# 16-colors is one of the variants of XFree86 3.3 xterm, updated for 4.0 (T.Dickey)
# If configured to support 88- or 256-colors (which is fairly common in 2009),
# xterm also recognizes the control sequences for initc -TD
xterm-16color|xterm with 16 colors like aixterm:\
:cc:tc=ibm+16color:tc=xterm-new:
# 256-colors is a compile-time feature of XFree86 xterm beginning with
# patch #111 (1999/7/10) -TD
xterm+256color|xterm 256-color feature:\
:cc:\
:Co#256:pa#32767:\
:AB=\E[48;5;%dm:AF=\E[38;5;%dm:Sb@:Sf@:
# 88-colors is a compile-time feature of XFree86 xterm beginning with
# patch #115 (1999/9/18) -TD
#
# Note that the escape sequences used are the same as for 256-colors - xterm
# has a different table of default color resource values. If built for
# 256-colors, it can still handle an 88-color palette by using the initc
# capability.
#
# At this time (2007/7/14), except for rxvt 2.7.x, none of the other terminals
# which support the xterm+256color feature support the associated initc
# capability. So it is cancelled in the entries which use this and/or the
# xterm+256color block.
#
# The default color palette for the 256- and 88-colors are different. A
# given executable will have one palette (perhaps compiled-in). If the program
# supports xterm's control sequence, it can be programmed using initc.
xterm+88color|xterm 88-color feature:\
:Co#88:pa#7744:tc=xterm+256color:
# These variants of XFree86 3.9.16 xterm are built as a configure option.
xterm-256color|xterm with 256 colors:\
:tc=xterm+256color:tc=xterm-new:
xterm-88color|xterm with 88 colors:\
:tc=xterm+88color:tc=xterm-256color:
# These two are used to demonstrate the any-event mouse support, i.e., by
# using an extended name "XM" which tells ncurses to put the terminal into
# a special mode when initializing the xterm mouse.
xterm-1002|testing xterm-mouse:\
:XM=\E[?1002%?%p1%{1}%=%th%el%;:tc=xterm-new:
xterm-1003|testing xterm-mouse:\
:XM=\E[?1003%?%p1%{1}%=%th%el%;:tc=xterm-new:
# This chunk is based on suggestions by Ailin Nemui and Nicholas Marriott, who
# asked for some of xterm's advanced features to be added to its terminfo
# entry. It defines extended capabilities not found in standard terminfo or
# termcap. These are useful in tmux, for instance, hence the name.
#
# One caveat in adding extended capabilities in ncurses is that if the names
# are longer than two characters, then they will not be visible through the
# termcap interface.
#
# Ms modifies the selection/clipboard. Its parameters are
# p1 = the storage unit (clipboard, selection or cut buffer)
# p2 = the base64-encoded clipboard content.
#
# Ss is used to set the cursor style as described by the DECSCUSR
# function to a block or underline.
# Se resets the cursor style to the terminal power-on default.
#
# Cs and Ce set and reset the cursor colour.
xterm+tmux|advanced xterm features used in tmux:\
:Cr=\E]112\007:Cs=\E]12;%p1%s\007:\
:Ms=\E]52;%p1%s;%p2%s\007:Se=\E[2 q:Ss=\E[%p1%d q:
# This is another variant, for XFree86 4.0 xterm (T.Dickey)
# This is an 8-bit version of xterm, which emulates DEC vt220 with ANSI color.
# To use it, your decTerminalID resource must be set to 200 or above.
#
# HTS \E H \210
# RI \E M \215
# SS3 \E O \217
# CSI \E [ \233
#
# (sgr removed to fit entry within 1023 bytes)
# (acsc removed to fit entry within 1023 bytes)
# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
xterm-8bit|xterm terminal emulator 8-bit controls (X Window System):\
:am:bs:km:mi:ms:xn:\
:co#80:it#8:li#24:\
:AL=\233%dL:DC=\233%dP:DL=\233%dM:DO=\233%dB:IC=\233%d@:\
:K1=\217w:K2=\217y:K3=\217u:K4=\217q:K5=\217s:LE=\233%dD:\
:RI=\233%dC:UP=\233%dA:ae=\E(B:al=\233L:as=\E(0:bl=^G:\
:bt=\233Z:cd=\233J:ce=\233K:cl=\233H\2332J:\
:cm=\233%i%d;%dH:cr=^M:cs=\233%i%d;%dr:ct=\2333g:\
:dc=\233P:dl=\233M:do=^J:ec=\233%dX:ei=\2334l:ho=\233H:\
:im=\2334h:\
:is=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8:\
:k1=\23311~:k2=\23312~:k3=\23313~:k4=\23314~:k5=\23315~:\
:k6=\23317~:k7=\23318~:k8=\23319~:k9=\23320~:kD=\2333~:\
:kI=\2332~:kN=\2336~:kP=\2335~:kb=^H:kd=\217B:\
:ke=\233?1l\E>:kh=\2331~:kl=\217D:kr=\217C:ks=\233?1h\E=:\
:ku=\217A:le=^H:mb=\2335m:md=\2331m:me=\2330m:mr=\2337m:\
:nd=\233C:rc=\E8:sc=\E7:se=\23327m:sf=^J:so=\2337m:sr=\215:\
:st=\210:ta=^I:te=\233?1049l:ti=\233?1049h:ue=\23324m:\
:up=\233A:us=\2334m:vb=\233?5h\233?5l:\
:ve=\233?25l\233?25h:vi=\233?25l:vs=\233?12;25h:
xterm-hp|xterm with hpterm function keys:\
:@7=\EF:k1=\Ep:k2=\Eq:k3=\Er:k4=\Es:k5=\Et:k6=\Eu:k7=\Ev:\
:k8=\Ew:kC=\EJ:kD=\EP:kI=\EQ:kN=\ES:kP=\ET:kd=\EB:kh=\Eh:\
:kl=\ED:kr=\EC:ku=\EA:tc=xterm-basic:
xterm-sco|xterm with SCO function keys:\
:@1=\E[E:@7=\E[F:F1=\E[W:F2=\E[X:F3=\E[Y:F4=\E[Z:F5=\E[a:\
:F6=\E[b:F7=\E[c:F8=\E[d:F9=\E[e:FA=\E[f:FB=\E[g:FC=\E[h:\
:FD=\E[i:FE=\E[j:FF=\E[k:FG=\E[l:FH=\E[m:FI=\E[n:FJ=\E[o:\
:FK=\E[p:FL=\E[q:FM=\E[r:FN=\E[s:FO=\E[t:FP=\E[u:FQ=\E[v:\
:FR=\E[w:FS=\E[x:FT=\E[y:FU=\E[z:FV=\E[@:FW=\E[[:FX=\E[\\:\
:FY=\E[]:FZ=\E[\136:Fa=\E[_:Fb=\E[`:Fc=\E[{:Km=\E[>M:\
:k1=\E[M:k2=\E[N:k3=\E[O:k4=\E[P:k5=\E[Q:k6=\E[R:k7=\E[S:\
:k8=\E[T:k9=\E[U:k;=\E[V:kD=\177:kI=\E[L:kN=\E[G:kP=\E[I:\
:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:tc=xterm-basic:
# The xterm-new description has all of the features, but is not completely
# compatible with vt220. If you are using a Sun or PC keyboard, set the
# sunKeyboard resource to true:
# + maps the editing keypad
# + interprets control-function-key as a second array of keys, so a
# 12-fkey keyboard can support vt220's 20-fkeys.
# + maps numeric keypad "+" to ",".
# + uses DEC-style control sequences for the application keypad.
#
xterm-vt220|xterm emulating vt220:\
:@7=\E[4~:F1=\E[23~:F2=\E[24~:F3=\E[25~:F4=\E[26~:\
:F5=\E[28~:F6=\E[29~:F7=\E[31~:F8=\E[32~:F9=\E[33~:\
:FA=\E[34~:Km=\E[M:k5=\E[15~:k6=\E[17~:k7=\E[18~:\
:k8=\E[19~:k9=\E[20~:k;=\E[21~:kB=\E[Z:kI=\E[2~:kN=\E[6~:\
:kP=\E[5~:kd=\EOB:kh=\E[1~:kl=\EOD:kr=\EOC:ku=\EOA:\
:tc=xterm+app:tc=xterm+edit:tc=xterm-basic:\
:tc=vt220+keypad:
xterm-vt52|xterm emulating dec vt52:\
:co#80:it#8:li#24:\
:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
:ae=\EG:as=\EF:bl=^G:cd=\EJ:ce=\EK:cl=\EH\EJ:cm=\EY%+ %+ :\
:cr=^M:do=\EB:ho=\EH:kb=^H:kd=\EB:kl=\ED:kr=\EC:ku=\EA:\
:le=\ED:nd=\EC:nw=^M^J:sf=^J:sr=\EI:ta=^I:up=\EA:
xterm-noapp|xterm with cursor keys in normal mode:\
:ke=\E>:ks=\E=:te@:ti@:tc=xterm+noapp:tc=xterm:
xterm-24|vs100|xterms|xterm terminal emulator (X Window System):\
:li#24:tc=xterm-old:
# This is xterm for ncurses.
xterm|xterm terminal emulator (X Window System):\
:tc=xterm-new:
# This entry assumes that xterm's handling of VT100 SI/SO is disabled by
# setting the vt100Graphics resource to false.
xterm-utf8|xterm with no VT100 line-drawing in UTF-8 mode:\
:U8#1:tc=xterm:
# These entries allow access to the X titlebar and icon name as a status line.
# Note that twm (and possibly window managers descended from it such as tvtwm,
# ctwm, and vtwm) track windows by icon-name; thus, you don't want to mess
# with it.
xterm+sl|access X title line and icon name:\
:hs:\
:ws#40:\
:ds=\E]0;\007:fs=^G:ts=\E]0;:tc=xterm:
xterm+sl-twm|access X title line (pacify twm-descended window managers):\
:hs:\
:ws#40:\
:ds=\E]2;\007:fs=^G:ts=\E]2;:tc=xterm:
#
# The following xterm variants don't depend on your base version
#
# xterm with bold instead of underline
xterm-bold|xterm terminal emulator (X11R6 Window System) standout w/bold:\
:so=\E[7m:us=\E[1m:tc=xterm-old:
# See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
xterm-nic|xterm with ich/ich1 suppressed for non-curses programs:\
:IC@:ic@:tc=xterm:
# From: Mark Sheppard <kimble@mistral.co.uk>, 4 May 1996
xterm1|xterm terminal emulator ignoring the alternate screen buffer:\
:te@:ti@:tc=xterm:
#### KTERM
# (kterm: this had extension capabilities ":KJ:TY=ascii:" -- esr)
# (kterm should not invoke DEC Graphics as the alternate character set
# -- Kenji Rikitake)
# (proper setting of enacs, smacs, rmacs makes kterm to use DEC Graphics
# -- MATSUMOTO Shoji)
# kterm implements acsc via built-in table of X Drawable's
kterm|kterm kanji terminal emulator (X window system):\
:es:hs:XT:\
:NC@:\
:Km=\E[M:RA=\E[?7l:SA=\E[?7h:\
:ac=``aajjkkllmmnnooppqqrrssttuuvvwwxx~~:ae=\E(B:\
:as=\E(0:cs=\E[%i%d;%dr:ds=\E[?H:eA=:fs=\E[?F:me=\E[0m:\
:rc=\E8:sc=\E7:ts=\E[?E\E[?%i%dT:tc=xterm-r6:\
:tc=ecma+color:
kterm-color|kterm-co|kterm with ANSI colors:\
:NC@:tc=kterm:tc=ecma+color:
#### Other XTERM
# These (xtermc and xtermm) are distributed with Solaris. They refer to a
# variant of xterm which is apparently no longer supported, but are interesting
# because they illustrate SVr4 curses mouse controls - T.Dickey
xtermm|xterm terminal emulator (monocrome):\
:am:bs:km:mi:ms:xn:\
:BT#3:co#80:it#8:li#24:\
:@7=\E[Y:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:F1=\EOZ:\
:F2=\EOA:Gm=\E[%dY:IC=\E[%d@:Km=\E[^_:LE=\E[%dD:RI=\E[%dC:\
:RQ=\E[492Z:UP=\E[%dA:\
:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
:ae=^O:al=\E[L:as=^N:bl=^G:cb=3\E[1K:cd=\E[J:ce=\E[K:\
:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:eA=\E(B\E)0:ei=:ho=\E[H:\
:ic=\E[@:im=:k0=\EOy:k5=\EOT:k6=\EOU:k7=\EOV:k8=\EOW:\
:k9=\EOX:k;=\EOY:kN=\E[U:kP=\E[V:kb=^H:kd=\EOB:kh=\E[H:\
:kl=\EOD:kr=\EOC:ku=\EOA:le=\E[D:mb@:md=\E[1m:me=\E[0m:\
:mr=\E[7m:nd=\E[C:\
:r1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H:\
:r2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:rc=\E8:sc=\E7:\
:se=\E[m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:te=\E@0\E[?4r:\
:ti=\E@0\E[?4s\E[?4h\E@1:up=\E[A:tc=vt100+fnkeys:
xtermc|xterm terminal emulator (color):\
:Co#8:NC#7:pa#64:\
:AB=\E[4%dm:AF=\E[3%dm:op=\E[100m:tc=xtermm:
# From: David J. MacKenzie <djm@va.pubnix.com> 20 Apr 1995
# Here's a termcap entry I've been using for xterm_color, which comes
# with BSD/OS 2.0, and the X11R6 contrib tape too I think. Besides the
# color stuff, I also have a status line defined as the window manager
# title bar. [I have translated it to terminfo -- ESR]
xterm-pcolor|xterm with color used for highlights and status line:\
:md=\E[1m\E[43m:mr=\E[7m\E[34m:so=\E[7m\E[31m:\
:us=\E[4m\E[42m:tc=xterm+sl:tc=xterm-r6:
# This describes the capabilities of color_xterm, an xterm variant from
# before ECMA-64 color support was folded into the main-line xterm release.
# This entry is straight from color_xterm's maintainer.
# From: Jacob Mandelson <jlm@ugcs.caltech.edu>, 09 Nov 1996
# The README's with the distribution also say that it supports SGR 21, 24, 25
# and 27, but they are not present in the terminfo or termcap.
color_xterm|cx|cx100|color_xterm color terminal emulator for X:\
:am:bs:km:mi:ms:xn:XT:\
:NC@:co#80:it#8:li#65:\
:@7=\E[8~:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:\
:F1=\E[23~:F2=\E[24~:IC=\E[%d@:Km=\E[M:LE=\E[%dD:\
:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:UP=\E[%dA:\
:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
:ae=^O:al=\E[L:as=^N:bl=^G:cb=\E[1K:cd=\E[J:ce=\E[K:\
:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
:dc=\E[P:dl=\E[M:do=^J:eA=\E(B\E)0:ei=\E[4l:ho=\E[H:\
:i1=\E[r\E[m\E[?7h\E[?4;6l\E[4l:im=\E[4h:k1=\E[11~:\
:k2=\E[12~:k3=\E[13~:k4=\E[14~:k5=\E[15~:k6=\E[17~:\
:k7=\E[18~:k8=\E[19~:k9=\E[20~:k;=\E[21~:kI=\E[2~:\
:kN=\E[6~:kP=\E[5~:kb=^H:kd=\EOB:kh=\E[7~:kl=\EOD:kr=\EOC:\
:ku=\EOA:le=^H:md=\E[1m:me=\E[0m:mr=\E[7m:nd=\E[C:\
:r1=\E(B\017\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E<:\
:rc=\E8:sc=\E7:se=\E[27m:sf=^J:so=\E[7m:sr=\EM:ta=^I:\
:te=\E>\E[?41;1r:ti=\E[?1;41s\E[?1;41h\E=:ue=\E[24m:\
:up=\E[A:us=\E[4m:tc=ecma+color:tc=vt220+keypad:
# The 'nxterm' distributed with Redhat Linux 5.2 is a slight rehack of
# xterm-sb_right-ansi-3d, which implements ANSI colors, but does not support
# SGR 39 or 49. SGR 0 does reset colors (along with everything else). This
# description is "compatible" with color_xterm, rxvt and XFree86 xterm, except
# that each of those implements the home, end, delete keys differently.
#
# Redhat Linux 6.x distributes XFree86 xterm as "nxterm", which uses bce
# colors; note that this is not compatible with the 5.2 version.
# csw (2002-05-15): make xterm-color primary instead of nxterm, to
# match XFree86's xterm.terminfo usage and prevent circular links
xterm-color|nxterm|generic color xterm:\
:NC@:\
:op=\E[m:tc=xterm-r6:tc=klone+color:
# This entry describes an xterm with Sun-style function keys enabled
# via the X resource setting "xterm*sunFunctionKeys:true"
# To understand <kf11>/<kf12> note that L1,L2 and F11,F12 are the same.
# The <kf13>...<kf20> keys are L3-L10. We don't set <kf16=\E[197z>
# because we want it to be seen as <kcpy>.
# The <kf31>...<kf45> keys are R1-R15. We treat some of these in accordance
# with their Sun keyboard labels instead.
# From: Simon J. Gerraty <sjg@zen.void.oz.au> 10 Jan 1996
xterm-sun|xterm with sunFunctionKeys true:\
:%1=\E[196z:&8=\E[195z:@0=\E[200z:@5=\E[197z:@7=\E[220z:\
:@8=\EOM:F1=\E[192z:F2=\E[193z:F3=\E[194z:F4=\E[195z:\
:F5=\E[196z:F7=\E[198z:F8=\E[199z:F9=\E[200z:FA=\E[201z:\
:FL=\E[208z:FM=\E[209z:FN=\E[210z:FO=\E[211z:FP=\E[212z:\
:FQ=\E[213z:FS=\E[215z:FU=\E[217z:FW=\E[219z:FY=\E[221z:\
:FZ=\E[222z:Fa=\E[234z:Fb=\E[235z:K2=\E[218z:k1=\E[224z:\
:k2=\E[225z:k3=\E[226z:k4=\E[227z:k5=\E[228z:k6=\E[229z:\
:k7=\E[230z:k8=\E[231z:k9=\E[232z:k;=\E[233z:kD=\E[3z:\
:kI=\E[2z:kN=\E[222z:kP=\E[216z:kd=\EOB:kh=\E[214z:\
:kl=\EOD:kr=\EOC:ku=\EOA:tc=xterm-basic:
xterms-sun|small (80x24) xterm with sunFunctionKeys true:\
:co#80:li#24:tc=xterm-sun:
#### GNOME (VTE)
# this describes the alpha-version of Gnome terminal shipped with Redhat 6.0
gnome-rh62|Gnome terminal:\
:ut:\
:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:kD=\177:tc=xterm-color:
# GNOME Terminal 1.4.0.4 (Redhat 7.2)
#
# This implements a subset of vt102 with a random selection of features from
# other terminals such as color and function-keys.
#
# shift-f1 to shift-f10 are f11 to f20
#
# NumLock changes the application keypad to approximate vt100 keypad, except
# that there is no escape sequence matching comma (,).
#
# Other defects observed:
# vt100 LNM mode is not implemented.
# vt100 80/132 column mode is not implemented.
# vt100 DECALN is not implemented.
# vt100 DECSCNM mode is not implemented, so flash does not work.
# vt100 TBC (tab reset) is not implemented.
# xterm alternate screen controls do not restore cursor position properly
# it hangs in tack after running function-keys test.
gnome-rh72|GNOME Terminal:\
:km@:ut:\
:RA=\E[?7l:SA=\E[?7h:ct@:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:\
:kD=\E[3~:me=\E[0m\017:ve=\E[?25h:vi=\E[?25l:\
:tc=xterm-color:
# GNOME Terminal 2.0.1 (Redhat 8.0)
#
# Documentation now claims it implements vt220 (which is demonstrably false).
# However, it does implement ECH, which is a vt220 feature. And there are
# workable vt100 LNM, DECALN, DECSNM modes, making it possible to display
# more of its bugs using vttest.
#
# However, note that bce and msgr are broken in this release. Tabs (tbc and
# hts) are broken as well. Sometimes flash (as in xterm-new) works.
#
# kf1 and kf10 are not tested since they're assigned (hardcoded?) to menu
# operations. Shift-tab generates a distinct sequence so it can be argued
# that it implements kcbt.
gnome-rh80|GNOME Terminal:\
:ms@:ut@:\
:ec=\E[%dX:kB=\E^I:kb=\177:op=\E[39;49m:vb=\E[?5h\E[?5l:\
:tc=gnome-rh72:
# GNOME Terminal 2.2.1 (Redhat 9.0)
#
# bce and msgr are repaired.
gnome-rh90|GNOME Terminal:\
:ms:ut:\
:#4=\EO2D:%i=\EO2C:*4=\E[3;2~:@7=\EOF:K2=\E[E:ch=\E[%i%dG:\
:ct=\E[3g:cv=\E[%i%dd:kB=\E[Z:kh=\EOH:tc=xterm+pcf0:\
:tc=xterm+pcfkeys:tc=gnome-rh80:
# GNOME Terminal 2.14.2 (Fedora Core 5)
# Ed Catmur notes that gnome-terminal has recognized soft-reset since May 2002.
gnome-fc5|GNOME Terminal:\
:r1=\Ec:\
:r2=\E7\E[r\E8\E[m\E[?7h\E[!p\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h:\
:tc=ansi+enq:tc=xterm+pcc0:tc=gnome-rh90:
# GNOME Terminal 2.18.1 (2007 snapshot)
#
# For any "recent" version of gnome-terminal, it is futile to attempt to
# support modifiers on cursor- and keypad keys because the program usually
# is hardcoded to set $TERM to "xterm", and on startup, it builds a subset
# of the keys (which more/less correspond to the termcap values), and will
# interpret those according to the $TERM value, but others not in the
# terminfo according to some constantly changing set of hacker guidelines -TD
vte-2007|VTE in GNOME Terminal snapshot 2.18.1:\
:tc=xterm+pcc2:tc=gnome-fc5:
gnome-2007|GNOME Terminal snapshot 2.18.1:\
:tc=vte-2007:
# GNOME Terminal 2.22.3 (2008 snapshot)
#
# In vttest, it claims to be a vt220 with national replacement character-sets,
# but aside from the identifier string, implements only a small fraction of
# vt220's behavior, which will make it less usable on a VMS system (unclear
# what the intent of the developer is, since the NRC feature exposed in vttest
# by this change does not work).
vte-2008|VTE in GNOME Terminal snapshot 2.22.3:\
:tc=vte+pcfkeys:tc=vte-2007:
gnome-2008|GNOME Terminal snapshot 2.22.3:\
:tc=vte-2008:
# GNOME terminal may automatically use the contents of the "xterm" terminfo to
# supply key information which is not built into the program. With 2.22.3,
# this list is built into the program (which addresses the inadvertant use of
# random terminfo data, though using a set of values which does not correspond
# to any that xterm produces - still not solving the problem that GNOME
# terminal hardcodes the $TERM variable as "xterm").
#
# terminfo modifier code keys
# kf13-kf24 shift 2 F1 to F12
# kf25-kf36 control 5 F1 to F12
# kf37-kf48 shift/control 6 F1 to F12
# kf49-kf60 alt 3 F1 to F12
# kf61-kf63 shift-alt 4 F1 to F3
#
# The parameters with \EO (SS3) are technically an error, since SS3 should have
# no parameters. This appears to be rote copying based on xterm+pcc0.
vte+pcfkeys|VTE's variation on xterm+pcfkeys:\
:F3=\EO1;2P:F4=\EO1;2Q:F5=\EO1;2R:F6=\EO1;2S:FF=\EO1;5P:\
:FG=\EO1;5Q:FH=\EO1;5R:FI=\EO1;5S:FR=\EO1;6P:FS=\EO1;6Q:\
:FT=\EO1;6R:FU=\EO1;6S:Fd=\EO1;3P:Fe=\EO1;3Q:Ff=\EO1;3R:\
:Fg=\EO1;3S:Fp=\EO1;4P:Fq=\EO1;4Q:Fr=\EO1;4R:k1=\EOP:\
:k2=\EOQ:k3=\EOR:k4=\EOS:tc=xterm+pcfkeys:
gnome+pcfkeys|VTE's variation on xterm+pcfkeys:\
:tc=vte+pcfkeys:
vte|VTE aka GNOME Terminal:\
:tc=vte-2008:
gnome|GNOME Terminal:\
:tc=vte:
# palette is hardcoded...
vte-256color|VTE with xterm 256-colors:\
:Ic@:tc=xterm+256color:tc=vte:
gnome-256color|GNOME Terminal with xterm 256-colors:\
:tc=vte-256color:
# XFCE Terminal 0.2.5.4beta2
#
# This is based on some of the same source code, e.g., the VTE library, as
# gnome-terminal, but has fewer features, fails more screens in vttest.
# Since most of the terminfo-related behavior is due to the VTE library,
# the terminfo is the same as gnome-terminal.
xfce|Xfce Terminal:\
:tc=vte:
#### Other GNOME
# Multi-Gnome-Terminal 1.6.2
#
# This does not use VTE, and does have different behavior (compare xfce and
# gnome).
mgt|Multi GNOME Terminal:\
:SF=\E[%dS:SR=\E[%dT:tc=xterm-xf86-v333:
#### KDE
# This is kvt 0-18.7, shipped with Redhat 6.0 (though whether it supports bce
# or not is debatable).
kvt|KDE terminal:\
:km@:ut:\
:@7=\E[F:kD=\177:kh=\E[H:tc=xterm-color:
# Konsole 1.0.1
# (formerly known as kvt)
#
# This program hardcodes $TERM to 'xterm', which is not accurate. However, to
# simplify this entry (and point out why konsole isn't xterm), we base this on
# xterm-r6. The default keyboard appears to be 'linux'.
#
# Notes:
# a) konsole implements several features from XFree86 xterm, though none of
# that is documented - except of course in its source code - apparently
# because its implementors are unaccustomed to reading documentation - as
# evidenced by the sparse and poorly edited documentation distributed with
# konsole. Some features such as the 1049 private mode are recognized but
# incorrectly implemented as a duplicate of the 47 private mode.
# b) even with the "vt100 (historical)" keyboard setting, the numeric keypad
# sends PC-style escapes rather than vt100.
# c) fails vttest menu 3 (Test of character sets) because it does not properly
# parse some control sequences. Also fails vttest Primary Device Attributes
# by sending a bogus code (in the source it says it's supposed to be a
# vt220, which is doubly incorrect because it does not implement vt220
# control sequences except for a few special cases). Treat it as a
# mildly-broken vt102.
#
# Update for konsole 1.3.2:
# The 1049 private mode works (but see the other xterm screens in vttest).
# Primary Device Attributes now returns the code for a vt100 with advanced
# video option. Perhaps that's intended to be a "mildly-broken vt102".
#
# Updated for konsole 1.6.4:
# add konsole-solaris
#
# Updated for konsole 1.6.6:
# add control-key modifiers for function-keys, etc.
#
# vttest menu 1 shows that both konsole and gnome terminal do wrapping
# different from xterm (and vt100's). They have the same behavior in this
# detail, but it is unclear which copies the other.
konsole-base|KDE console window:\
:NP:km@:ut:XT:\
:NC@:\
:*6@:@0@:@7=\E[4~:F1@:F2@:F3@:F4@:F5@:F6@:F7@:F8@:F9@:FA@:\
:RA=\E[?7l:SA=\E[?7h:SF=\E[%dS:SR=\E[%dT:bl@:ch=\E[%i%dG:\
:cv=\E[%i%dd:ec=\E[%dX:k1@:k2@:k3@:k4@:k5@:k6@:k7@:k8@:k9@:k;@:\
:kD@:kb=\177:kh=\E[1~:mb=\E[5m:me=\E[0m\017:\
:rs=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h:\
:se=\E[27m:ue=\E[24m:vb=\E[?5h\E[?5l:ve=\E[?25h:\
:vi=\E[?25l:tc=ecma+color:tc=xterm-r6:
konsole-linux|KDE console window with linux keyboard:\
:F1=\E[23~:F2=\E[24~:F3@:F4@:F5@:F6@:F7@:F8@:F9@:FA@:k1=\E[[A:\
:k2=\E[[B:k3=\E[[C:k4=\E[[D:k5=\E[[E:k6=\E[17~:k7=\E[18~:\
:k8=\E[19~:k9=\E[20~:k;=\E[21~:kD=\E[3~:tc=konsole-base:
konsole-solaris|KDE console window with Solaris keyboard:\
:@7=\E[4~:kb=^H:kh=\E[1~:tc=konsole-vt100:
# KDE's "XFree86 3.x.x" keyboard is based on reading the xterm terminfo rather
# than testing the code.
konsole-xf3x|KDE console window with keyboard for XFree86 3.x xterm:\
:@7=\E[4~:kh=\E[1~:tc=konsole-vt100:
# The value for kbs reflects local customization rather than the settings used
# for XFree86 xterm.
konsole-xf4x|KDE console window with keyboard for XFree86 4.x xterm:\
:@7=\EOF:kh=\EOH:tc=konsole+pcfkeys:tc=konsole-vt100:
# Konsole does not implement shifted cursor-keys.
konsole+pcfkeys|konsole subset of xterm+pcfkeys:\
:#4@:%i@:kB=\E[Z:kF@:kR@:tc=xterm+pcc2:tc=xterm+pcf0:
# KDE's "vt100" keyboard has no relationship to any terminal that DEC made, but
# it is still useful for deriving the other entries.
konsole-vt100|KDE console window with vt100 (sic) keyboard:\
:@7=\E[F:F1=\E[23~:F2=\E[24~:F3@:F4@:F5@:F6@:F7@:F8@:F9@:FA@:\
:k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~:k5=\E[15~:\
:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:k;=\E[21~:\
:kD=\E[3~:kb=\177:kh=\E[H:tc=konsole-base:
konsole-vt420pc|KDE console window with vt420 pc keyboard:\
:kD=\177:kb=^H:tc=konsole-vt100:
konsole-16color|klone of xterm-16color:\
:NC#32:tc=ibm+16color:tc=konsole:
# make a default entry for konsole
konsole|KDE console window:\
:tc=konsole-xf4x:
# palette is hardcoded...
konsole-256color|KDE console window with xterm 256-colors:\
:Ic@:tc=xterm+256color:tc=konsole:
#### MLTERM
# This is mlterm 2.9.3's mlterm.ti, with some additions/corrections -TD
#
# It is nominally a vt102 emulator, with features borrowed from rxvt and
# xterm.
#
# The function keys are numbered based on shift/control/alt modifiers, except
# that the control-modifier itself is used to spawn a new copy of mlterm (the
# "-P" option). So control/F1 to control/F12 may not be usable, depending on
# how it is configured.
#
# kf1 to kf12 \E[11~ to \E[24~
# shift kf1 to kf12 \E[11;2~ to \E[24;2~
# alt kf1 to kf12 \E[11;3~ to \E[24;3~
# shift/alt kf1 to kf12 \E[11;4~ to \E[24;4~
# control kf1 to kf12 \E[11;5~ to \E[24;5~ (maybe)
# control/shift kf1 to kf12 \E[11;6~ to \E[24;6~
# control/alt kf1 to kf12 \E[11;7~ to \E[24;7~
# control/shift/alt kf1 to kf12 \E[11;8~ to \E[24;8~
#
# (sgr removed to fit entry within 1023 bytes)
# (acsc removed to fit entry within 1023 bytes)
# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
mlterm|multi lingual terminal emulator:\
:am:es:km:mi:ms:xn:\
:co#80:it#8:li#24:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
:LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:\
:ae=\E(B:al=\E[L:as=\E(0:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:\
:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:ec=\E[%dX:ei=\E[4l:ho=\E[H:\
:ic=\E[@:im=\E[4h:\
:is=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>:kD=\E[3~:\
:kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=\177:kd=\EOB:ke=\E[?1l\E>:\
:kh=\EOH:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:\
:md=\E[1m:me=\E[0m:mr=\E[7m:nd=\E[C:nw=\EE:rc=\E8:\
:rs=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l:\
:sc=\E7:se=\E[27m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
:te=\E[?1049l:ti=\E[?1049h:ue=\E[24m:up=\E[A:us=\E[4m:\
:ve=\E[?25h:vi=\E[?25l:tc=mlterm+pcfkeys:tc=xterm+r6f2:
# The insert/delete/home/end keys do not respond to modifiers because mlterm
# looks in its termcap to decide which string to send. If it used terminfo
# (when available), it could use the extended names introduced for xterm.
mlterm+pcfkeys|fragment for PC-style fkeys:\
:#4=\EO1;2D:%c=\E[6;2~:%e=\E[5;2~:%i=\EO1;2C:
mlterm-256color|mlterm 3.0 with xterm 256-colors:\
:tc=xterm+256color:tc=rxvt:
#### RXVT
# From: Thomas Dickey <dickey@clark.net> 04 Oct 1997
# Updated: Oezguer Kesim <kesim@math.fu-berlin.de> 02 Nov 1997
# Notes:
# rxvt 2.21b uses
# smacs=\E(B\E)U^N, rmacs=\E(B\E)0^O,
# but some applications don't work with that.
# It also has an AIX extension
# box2=lqkxjmwuvtn,
# and
# ech=\E[%p1%dX,
# but the latter does not work correctly.
#
# The distributed terminfo says it implements hpa and vpa, but they are not
# implemented correctly, using relative rather than absolute positioning.
#
# rxvt is normally configured to look for "xterm" or "xterm-color" as $TERM.
# Since rxvt is not really compatible with xterm, it should be configured as
# "rxvt" or "rxvt-color".
#
# removed dch/dch1 because they are inconsistent with bce/ech -TD
# remove km as per tack test -TD
rxvt-basic|rxvt terminal base (X Window System):\
:am:bs:eo:mi:ms:ut:xn:xo:XT:\
:co#80:it#8:li#24:\
:AL=\E[%dL:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:Km=\E[M:\
:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:\
:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
:ae=^O:al=\E[L:as=^N:bl=^G:cb=\E[1K:cd=\E[J:ce=\E[K:\
:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
:ct=\E[3g:dl=\E[M:do=^J:eA=\E(B\E)0:ei=\E[4l:ho=\E[H:\
:i1=\E[?47l\E=\E[?1l:ic=\E[@:im=\E[4h:\
:is=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l:kB=\E[Z:\
:kb=^H:ke=\E>:ks=\E=:le=^H:mb=\E[5m:md=\E[1m:me=\E[0m:\
:mr=\E[7m:nd=\E[C:\
:r1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H:\
:r2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h:\
:rc=\E8:s0=\E(B:s1=\E(0:sc=\E7:se=\E[27m:sf=^J:so=\E[7m:\
:sr=\EM:st=\EH:ta=^I:te=\E[2J\E[?47l\E8:ti=\E7\E[?47h:\
:ue=\E[24m:up=\E[A:us=\E[4m:vb=\E[?5h\E[?5l:ve=\E[?25h:\
:vi=\E[?25l:tc=vt100+enq:tc=rxvt+pcfkeys:\
:tc=vt220+keypad:
# Key Codes from rxvt reference:
#
# Note: Shift + F1-F10 generates F11-F20
#
# For the keypad, use Shift to temporarily override Application-Keypad
# setting use Num_Lock to toggle Application-Keypad setting if Num_Lock
# is off, escape sequences toggle Application-Keypad setting.
# Also note that values of Home, End, Delete may have been compiled
# differently on your system.
#
# Normal Shift Control Ctrl+Shift
# Tab ^I ESC [ Z ^I ESC [ Z
# BackSpace ^H ^? ^? ^?
# Find ESC [ 1 ~ ESC [ 1 $ ESC [ 1 ^ ESC [ 1 @
# Insert ESC [ 2 ~ paste ESC [ 2 ^ ESC [ 2 @
# Execute ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
# Select ESC [ 4 ~ ESC [ 4 $ ESC [ 4 ^ ESC [ 4 @
# Prior ESC [ 5 ~ scroll-up ESC [ 5 ^ ESC [ 5 @
# Next ESC [ 6 ~ scroll-down ESC [ 6 ^ ESC [ 6 @
# Home ESC [ 7 ~ ESC [ 7 $ ESC [ 7 ^ ESC [ 7 @
# End ESC [ 8 ~ ESC [ 8 $ ESC [ 8 ^ ESC [ 8 @
# Delete ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
# F1 ESC [ 11 ~ ESC [ 23 ~ ESC [ 11 ^ ESC [ 23 ^
# F2 ESC [ 12 ~ ESC [ 24 ~ ESC [ 12 ^ ESC [ 24 ^
# F3 ESC [ 13 ~ ESC [ 25 ~ ESC [ 13 ^ ESC [ 25 ^
# F4 ESC [ 14 ~ ESC [ 26 ~ ESC [ 14 ^ ESC [ 26 ^
# F5 ESC [ 15 ~ ESC [ 28 ~ ESC [ 15 ^ ESC [ 28 ^
# F6 ESC [ 17 ~ ESC [ 29 ~ ESC [ 17 ^ ESC [ 29 ^
# F7 ESC [ 18 ~ ESC [ 31 ~ ESC [ 18 ^ ESC [ 31 ^
# F8 ESC [ 19 ~ ESC [ 32 ~ ESC [ 19 ^ ESC [ 32 ^
# F9 ESC [ 20 ~ ESC [ 33 ~ ESC [ 20 ^ ESC [ 33 ^
# F10 ESC [ 21 ~ ESC [ 34 ~ ESC [ 21 ^ ESC [ 34 ^
# F11 ESC [ 23 ~ ESC [ 23 $ ESC [ 23 ^ ESC [ 23 @
# F12 ESC [ 24 ~ ESC [ 24 $ ESC [ 24 ^ ESC [ 24 @
# F13 ESC [ 25 ~ ESC [ 25 $ ESC [ 25 ^ ESC [ 25 @
# F14 ESC [ 26 ~ ESC [ 26 $ ESC [ 26 ^ ESC [ 26 @
# F15 (Help) ESC [ 28 ~ ESC [ 28 $ ESC [ 28 ^ ESC [ 28 @
# F16 (Menu) ESC [ 29 ~ ESC [ 29 $ ESC [ 29 ^ ESC [ 29 @
# F17 ESC [ 31 ~ ESC [ 31 $ ESC [ 31 ^ ESC [ 31 @
# F18 ESC [ 32 ~ ESC [ 32 $ ESC [ 32 ^ ESC [ 32 @
# F19 ESC [ 33 ~ ESC [ 33 $ ESC [ 33 ^ ESC [ 33 @
# F20 ESC [ 34 ~ ESC [ 34 $ ESC [ 34 ^ ESC [ 34 @
#
# Application
# Up ESC [ A ESC [ a ESC O a ESC O A
# Down ESC [ B ESC [ b ESC O b ESC O B
# Right ESC [ C ESC [ c ESC O c ESC O C
# Left ESC [ D ESC [ d ESC O d ESC O D
# KP_Enter ^M ESC O M
# KP_F1 ESC O P ESC O P
# KP_F2 ESC O Q ESC O Q
# KP_F3 ESC O R ESC O R
# KP_F4 ESC O S ESC O S
# XK_KP_Multiply * ESC O j
# XK_KP_Add + ESC O k
# XK_KP_Separator , ESC O l
# XK_KP_Subtract - ESC O m
# XK_KP_Decimal . ESC O n
# XK_KP_Divide / ESC O o
# XK_KP_0 0 ESC O p
# XK_KP_1 1 ESC O q
# XK_KP_2 2 ESC O r
# XK_KP_3 3 ESC O s
# XK_KP_4 4 ESC O t
# XK_KP_5 5 ESC O u
# XK_KP_6 6 ESC O v
# XK_KP_7 7 ESC O w
# XK_KP_8 8 ESC O x
# XK_KP_9 9 ESC O y
#
# The source-code for rxvt actually defines mappings for F21-F35, using
# "ESC [ 35 ~" to "ESC [ 49 ~". Keyboards with more than 12 function keys
# are rare, so this entry uses the shift- and control-modifiers as in
# xterm+pcfkeys to define keys past F12.
#
# kIC is normally not used, since rxvt performs a paste for that (shifted
# insert), unless private mode 35 is set.
#
# kDN, kDN5, kDN6, etc are extensions based on the names from xterm+pcfkeys -TD
# Removed kDN6, etc (control+shift) since rxvt does not implement this -TD
rxvt+pcfkeys|fragment for PC-style fkeys:\
:#2=\E[7$:#3=\E[2$:#4=\E[d:%c=\E[6$:%e=\E[5$:%i=\E[c:\
:*4=\E[3$:*6=\E[4~:*7=\E[8$:@0=\E[1~:@7=\E[8~:F1=\E[23~:\
:F2=\E[24~:F3=\E[25~:F4=\E[26~:F5=\E[28~:F6=\E[29~:\
:F7=\E[31~:F8=\E[32~:F9=\E[33~:FA=\E[34~:FB=\E[23$:\
:FC=\E[24$:FD=\E[11\136:FE=\E[12\136:FF=\E[13\136:\
:FG=\E[14\136:FH=\E[15\136:FI=\E[17\136:FJ=\E[18\136:\
:FK=\E[19\136:FL=\E[20\136:FM=\E[21\136:FN=\E[23\136:\
:FO=\E[24\136:FP=\E[25\136:FQ=\E[26\136:FR=\E[28\136:\
:FS=\E[29\136:FT=\E[31\136:FU=\E[32\136:FV=\E[33\136:\
:FW=\E[34\136:FX=\E[23@:FY=\E[24@:k1=\E[11~:k2=\E[12~:\
:k3=\E[13~:k4=\E[14~:k5=\E[15~:k6=\E[17~:k7=\E[18~:\
:k8=\E[19~:k9=\E[20~:k;=\E[21~:kD=\E[3~:kE=\E[8\136:\
:kF=\E[a:kI=\E[2~:kN=\E[6~:kP=\E[5~:kR=\E[b:kd=\E[B:\
:kh=\E[7~:kl=\E[D:kr=\E[C:ku=\E[A:
rxvt|rxvt terminal emulator (X Window System):\
:NC@:\
:ch=\E[%i%dG:cv=\E[%i%dd:k0=\E[21~:me=\E[m\017:\
:tc=rxvt-basic:tc=ecma+color:
rxvt-color|rxvt terminal emulator (X Window System):\
:tc=rxvt:
rxvt-256color|rxvt 2.7.9 with xterm 256-colors:\
:tc=xterm+256color:tc=rxvt:
rxvt-88color|rxvt 2.7.9 with xterm 88-colors:\
:tc=xterm+88color:tc=rxvt:
rxvt-xpm|rxvt terminal emulator (X Window System):\
:tc=rxvt:
rxvt-cygwin|rxvt terminal emulator (X Window System) on cygwin:\
:ac=+\257,\256-\1360\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376:\
:tc=rxvt:
rxvt-cygwin-native|rxvt terminal emulator (native MS Window System port) on cygwin:\
:ac=+\257,\256-\1360\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330~\376:\
:tc=rxvt-cygwin:
# This variant is supposed to work with rxvt 2.7.7 when compiled with
# NO_BRIGHTCOLOR defined. rxvt needs more work...
rxvt-16color|xterm with 16 colors like aixterm:\
:NC#32:tc=ibm+16color:tc=rxvt:
#### MRXVT
# mrxvt 0.5.4
#
# mrxvt is based on rxvt 2.7.11, but has by default XTERM_FKEYS defined, which
# makes its function-keys different from other flavors of rxvt -TD
mrxvt|multitabbed rxvt:\
:XT:\
:#2=\E[7;2~:*7=\E[8;2~:@7=\E[8~:kd=\E[B:kh=\E[7~:kl=\E[D:\
:kr=\E[C:ku=\E[A:tc=xterm+r6f2:tc=xterm+pcfkeys:tc=rxvt:
mrxvt-256color|multitabbed rxvt with 256 colors:\
:tc=xterm+256color:tc=mrxvt:
#### ETERM
# From: Michael Jennings <mej@valinux.com>
#
# Eterm 0.9.3
#
# removed kf0 which conflicts with kf10 -TD
# remove cvvis which conflicts with cnorm -TD
# Eterm does not implement control/shift cursor keys such as kDN6, or kPRV/kNXT
# but does otherwise follow the rxvt+pcfkeys model -TD
# remove nonworking flash -TD
# remove km as per tack test -TD
# (sgr removed to fit entry within 1023 bytes)
# (acsc removed to fit entry within 1023 bytes)
Eterm|Eterm-color|Eterm with xterm-style color support (X Window System):\
:5i:am:bw:eo:mi:ms:ut:xn:xo:XT:\
:BT#5:NC@:co#80:it#8:li#24:lm#0:\
:%1=\E[28~:%c@:%e@:@1=\EOu:@8=\EOM:AL=\E[%dL:DC=\E[%dP:\
:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:K1=\E[7~:K2=\EOu:K3=\E[5~:\
:K4=\E[8~:K5=\E[6~:Km=\E[M:LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:\
:SA=\E[?7h:UP=\E[%dA:ae=^O:al=\E[L:as=^N:bl=^G:cb=\E[1K:\
:cd=\E[J:ce=\E[K:ch=\E[%i%dG:cl=\E[H\E[2J:cm=\E[%i%d;%dH:\
:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:cv=\E[%i%dd:dc=\E[P:\
:dl=\E[M:do=\E[B:eA=\E)0:ec=\E[%dX:ei=\E[4l:ho=\E[H:\
:i1=\E[?47l\E>\E[?1l:ic=\E[@:im=\E[4h:\
:is=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l:kb=^H:ke=:\
:ks=:le=^H:mb=\E[5m:md=\E[1m:me=\E[0m:mr=\E[7m:nd=\E[C:\
:pf=\E[4i:po=\E[5i:\
:r1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H:\
:r2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h:\
:rc=\E8:sc=\E7:se=\E[27m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
:te=\E[2J\E[?47l\E8:ti=\E7\E[?47h:ue=\E[24m:up=\E[A:\
:us=\E[4m:ve=\E[?25h:vi=\E[?25l:tc=vt100+enq:\
:tc=rxvt+pcfkeys:tc=ecma+color:
Eterm-256color|Eterm with xterm 256-colors:\
:tc=xterm+256color:tc=Eterm:
Eterm-88color|Eterm with 88 colors:\
:tc=xterm+88color:tc=Eterm:
#### ATERM
# Based on rxvt 2.4.8, it has a few differences in key bindings
aterm|AfterStep terminal:\
:XT:\
:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:kb=\177:tc=rxvt:
#### XITERM
# xiterm 0.5-5.2
# This is not based on xterm's source...
# vttest shows several problems with keyboard, cursor-movements.
# see also http://invisible-island.net/xterm/xterm.faq.html#bug_xiterm
xiterm|internationalized terminal emulator for X:\
:km@:\
:kD=\E[3~:kb=\177:tc=klone+color:tc=xterm-r6:
#### HPTERM
# HP ships this (HPUX 9 and 10), except for the pb#9600 which was merged in
# from BSD termcap. (hpterm: added empty <acsc>, we have no idea what ACS
# chars look like --esr)
hpterm|X-hpterm|hp X11 terminal emulator:\
:am:da:db:mi:xs:\
:Nl#8:co#80:lh#2:li#24:lm#0:lw#8:pb#9600:sg#0:ug#0:\
:LF=\E&j@:LO=\E&jB:ac=:ae=^O:al=\EL:as=^N:bl=^G:bt=\Ei:\
:cd=1\EJ:ce=\EK:ch=\E&a%dC:cl=\E&a0y0C\EJ:cm=\E&a%dy%dC:\
:cr=^M:ct=\E3:cv=\E&a%dY:dc=\EP:dl=\EM:do=\EB:ei=\ER:im=\EQ:\
:k1=\Ep:k2=\Eq:k3=\Er:k4=\Es:k5=\Et:k6=\Eu:k7=\Ev:k8=\Ew:\
:kA=\EL:kC=\EJ:kD=\EP:kE=\EK:kF=\ES:kH=\EF:kI=\EQ:kL=\EM:\
:kM=\ER:kN=\EU:kP=\EV:kR=\ET:kS=\EJ:kT=\E1:ka=\E3:kb=^H:\
:kd=\EB:ke=\E&s0A:kh=\Eh:kl=\ED:kr=\EC:ks=\E&s1A:kt=\E2:\
:ku=\EA:le=^H:md=\E&dB:me=\E&d@:mh=\E&dH:ml=\El:mr=\E&dB:\
:mu=\Em:nd=\EC:se=\E&d@:sf=^J:so=\E&dJ:sr=\ET:st=\E1:ta=^I:\
:ue=\E&d@:up=\EA:us=\E&dD:
# HPUX 11 provides a color version.
hpterm-color|HP X11 terminal emulator with color:\
:cc:\
:Co#64:pa#8:\
:ho=\E&a0y0C:op=\E&v0S:sp=\E&v%dS:tc=hpterm:
#### EMU
# This is for the extensible terminal emulator on the X11R6 contrib tape.
# It corresponds to emu's internal emulation:
# emu -term emu
# emu's default sets TERM to "xterm", but that doesn't work well -TD
# fixes: remove bogus rmacs/smacs, change oc to op, add bce, am -TD
# fixes: add civis, cnorm, sgr -TD
emu|emu native mode:\
:am:mi:ms:ut:xo:\
:Co#15:co#80:it#8:li#24:pa#64:vt#200:\
:*6=\Esel:@0=\Efind:@8=^M:AB=\Es%i%d;:AF=\Er%i%d;:\
:AL=\EQ%d;:DC=\EI%d;:DL=\ER%d;:DO=\Ep%d;:F1=\EF11:\
:F2=\EF12:F3=\EF13:F4=\EF14:F5=\EF15:F6=\EF16:F7=\EF17:\
:F8=\EF18:F9=\EF19:FA=\EF20:LE=\Eq-%d;:RI=\Eq%d;:\
:UP=\Ep-%d;:\
:ac=61a\202f\260g2j\213k\214l\215m\216n\217o\220q\222s\224t\225u\226v\227w\230x\231~\244:\
:al=\EQ1;:bl=^G:cb=\EL:cd=\EN:ce=\EK:cl=\EP\EE0;0;:\
:cm=\EE%d;%d;:cr=^M:cs=\Ek%d;%d;:ct=\Ej:dc=\EI1;:dl=\ER1;:\
:do=\EB:ec=\Ej%d;:ei=\EX:ho=\EE0;0;:im=\EY:\
:is=\ES\Er0;\Es0;:k0=\EF00:k1=\EF01:k2=\EF02:k3=\EF03:\
:k4=\EF04:k5=\EF05:k6=\EF06:k7=\EF07:k8=\EF08:k9=\EF09:\
:k;=\EF10:kD=\177:kI=\Eins:kN=\Enext:kP=\Eprior:kb=^H:\
:kd=\EB:kl=\EC:kr=\ED:ku=\EA:le=^H:mb=\EW:md=\EU:me=\ES:\
:mr=\ET:nd=\EC:op=\Es0;\Er0;:rs=\ES\Es0;\Er0;:se=\ES:\
:sf=\EG:so=\ET:sr=\EF:st=\Eh:ta=^I:ue=\ES:up=\EA:us=\EV:\
:ve=\Ea:vi=\EZ:
# vt220 Terminfo entry for the Emu emulation, corresponds to
# emu -term vt220
# with NumLock set (to make the keypad transmit kf0-kf9).
# fixes: add am, xenl, corrected sgr0 -TD
# (sgr removed to fit entry within 1023 bytes)
# (acsc removed to fit entry within 1023 bytes)
# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
emu-220|Emu-220 (vt200-7bit mode):\
:am:xn:xo:\
:co#80:it#8:li#24:vt#200:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:\
:RI=\E[%dC:UP=\E[%dA:ae=^O:al=\E[1L:as=^N:bl=^G:cd=\E[0J:\
:ce=\E[0K:cl=\E[2J\E[H:cm=\E[%i%d;%dH:cr=^M:\
:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[1P:dl=\E[1M:do=\E[1B:\
:ho=\E[H:if=/usr/share/tabset/vt300:\
:is=\E>\E[?1l\E[?3l\E[4l\E[?7h:k0=\EOp:k1=\EOq:k2=\EOr:\
:k3=\EOs:k4=\EOt:k5=\EOu:k6=\EOv:k7=\EOw:k8=\EOx:k9=\EOy:\
:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=^H:kd=\E[B:ke=\E>:\
:kl=\E[D:kr=\E[C:ks=\E=:ku=\E[A:le=\E[1D:mb=\E[0;5m:\
:md=\E[0;1m:me=\E[0m:mr=\E[0;7m:nd=\E[1C:rc=\E8:\
:rs=\E[4l\E[34l\E[?1l\E[?3l\E[?5l\E[?7h:sc=\E7:se=\E[m:\
:sf=\ED:so=\E[0;7m:sr=\EM:st=\EH:ta=^I:te=\E>:ti=\E[?1l\E=:\
:ue=\E[m:up=\E[1A:us=\E[0;4m:ve=\E[?25h:vi=\E[?25l:
#### MVTERM
# A commercial product, Reportedly a version of Xterm with an OPEN LOOK UI,
# print interface, ANSI X3.64 colour escape sequences, etc. Newsgroup postings
# indicate that it emulates more than one terminal, but incompletely.
#
# This is adapted from a FreeBSD bug-report by Daniel Rudy <dcrudy@pacbell.net>
# It is based on vt102's entry, with some subtle differences, but also
# has status line
# supports ANSI colors (except for 'op' string)
# apparently implements alternate screen like xterm
# does not use padding, of course.
mvterm|vv100|SwitchTerm aka mvTERM:\
:am:es:hs:km:mi:ms:xn:\
:Co#8:co#80:it#8:li#24:pa#64:\
:AB=\E[4%dm:AF=\E[3%dm:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:\
:DO=\E[%dB:IC=\E[%d@:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:\
:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
:ae=^O:al=\E[L:as=^N:bl=^G:cb=3\E[1K:cd=\E[J:ce=\E[K:\
:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:ds=\E[?E:eA=\E(B\E)0:ei=:\
:fs=\E[?F:ho=\E[H:ic=\E[@:im=:k0=\EOy:k5=\EOt:k6=\EOu:\
:k7=\EOv:k8=\EOl:k9=\EOw:k;=\EOx:kb=^H:kd=\EOB:\
:ke=\E[?1l\E>:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:\
:mb=\E[5m:md=\E[1m:me=\E[0m:mr=\E[7m:nd=\E[C:op=\E[100m:\
:rc=\E8:\
:rs=\E>\E[1;3;4;5;6l\E[?7h\E[100m\E[m\E[r\E[2J\E[H:\
:sc=\E7:se=\E[m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
:te=\E[2J\E[?47l\E8:ti=\E7\E[?47h:ts=\E[?E\E[?%i%dT:\
:ue=\E[m:up=\E[A:us=\E[4m:tc=vt100+fnkeys:
#### MTERM
#
# This application is available by email from <mouse@Rodents.Montreal.QC.CA>.
#
# "mterm -type ansi" sets $TERM to "ansi"
mterm-ansi|ANSI emulation:\
:am:bw:mi:ms:\
:it#8:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:\
:RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:\
:ac=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
:ae=^O:al=\E[L:as=^N:bl=^G:cd=\E[J:ce=\E[K:ch=\E[%i%d`:\
:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:cv=\E[%i%dd:dc=\E[P:\
:dl=\E[M:do=\E[B:ec=\E[%dX:ei=\E[4l:ho=\E[H:ic=:im=\E[4h:\
:is=\E)0\017:kb=^H:le=\E[D:mb=\E[5m:md=\E[1m:me=\E[0m:\
:mh=\E[2m:mk=\E[8m:mr=\E[7m:nd=\E[C:nw=\EE:se=\E[27m:\
:sf=\E[S:so=\E[7m:sr=\E[T:ta=^I:ue=\E[24m:up=\E[A:us=\E[4m:
# mterm normally sets $TERM to "mterm"
mterm|mouse-sun|Der Mouse term:\
:am:bw:mi:\
:it#8:\
:al=^A:bl=^G:cd=^B:ce=^C:cl=^L:cm=\006%d.%d.:cr=^M:dc=^Y:\
:dl=^K:do=^N:ei=^O:ho=^P:im=^Q:kb=^H:le=^H:ll=^R:nd=^S:\
:nw=^M^U:se=^T:sf=^U:so=^V:sr=^W:ta=^I:up=^X:
# "mterm -type decansi" sets $TERM to "decansi"
#
# note: kdch1, kfnd, kslt are in the source code, but do not work -TD
# (sgr removed to fit entry within 1023 bytes)
# (acsc removed to fit entry within 1023 bytes)
# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
decansi|ANSI emulation with DEC compatibility hacks:\
:am:mi:ms:xn:\
:it#8:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:\
:RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:ae=^O:al=\E[L:\
:as=^N:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:\
:cr=^M:cs=\E[%i%d;%dr:dc=\E[P:dl=\E[M:do=\E[B:ec=\E[%dX:\
:ei=\E[4l:ho=\E[H:ic=:im=\E[4h:is=\E)0\E[r\017:k1=\E[11~:\
:k2=\E[12~:k3=\E[13~:k4=\E[14~:k5=\E[15~:k6=\E[17~:\
:k7=\E[18~:k8=\E[19~:k9=\E[20~:kD=\E[3~:kI=\E[2~:kN=\E[6~:\
:kP=\E[5~:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:kr=\EOC:\
:ks=\E[?1h\E=:ku=\EOA:le=\E[D:mb=\E[5m:md=\E[1m:me=\E[0m:\
:mh=\E[2m:mr=\E[7m:nd=\E[C:nw=\EE:rc=\E8:sc=\E7:se=\E[27m:\
:sf=\E[S:so=\E[7m:sr=\E[T:ta=^I:ue=\E[24m:up=\E[A:us=\E[4m:\
:ve=\E[?25h:vi=\E[?25l:
#### VWM
#
# vwmterm is a terminal emulator written for the VWM console window manager
#
vwmterm|(vwm term):\
:NP:am:cc:mi:ms:ut:xn:xo:\
:Co#8:pa#64:\
:@7=\E[4~:AB=\E[4%dm:AF=\E[3%dm:DO=\E[%dB:F1=\E[22~:\
:F2=\E[23~:LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:\
:UP=\E[%dA:\
:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
:ae=\E[10m:al=\E[L:as=\E[11m:bl=^G:cd=\E[J:ce=\E[K:\
:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:do=\E[B:ho=\E[H:\
:k1=\E[[A:k2=\E[[B:k3=\E[[C:k4=\E[[D:k5=\E[[E:k6=\E[17~:\
:k7=\E[18~:k8=\E[19~:k9=\E[20~:k;=\E[21~:kD=\E[3~:\
:kN=\E[6~:kP=\E[5~:kd=\E[B:kh=\E[1~:kl=\E[D:kr=\E[C:\
:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[0m:mh=\E[2m:\
:mk=\E[8m:mr=\E[7m:nd=\E[C:r1=\E[H\E[J\E[m\Ec:sf=^J:\
:so=\E[3m:te=\E[?1049l:ti=\E[?1049h:up=\E[A:us=\E[4m:\
:ve=\E[?25h:vi=\E[?25l:vs=\E[?25h:
#### MGR
#
# MGR is a Bell Labs window system lighter-weight than X.
# These entries describe MGR's xterm-equivalent.
# They are courtesy of Vincent Broman <broman@nosc.mil> 14 Jan 1997
#
mgr|Bellcore MGR (non X) window system terminal emulation:\
:am:km:\
:AL=3*\E%da:DC=5\E%dE:DL=3*\E%dd:IC=5\E%dA:RA=\E5S:\
:SA=\E5s:al=3\Ea:bl=^G:cd=\EC:ce=\Ec:cl=^L:cm=\E%r%d;%dM:\
:cr=^M:cs=\E%d;%dt:dc=\EE:dl=3\Ed:do=\Ef:ei=:hd=\E1;2f:\
:hu=\E1;2u:ic=\EA:im=:kb=^H:kd=\E[B:kl=\E[D:kr=\E[C:ku=\E[A:\
:le=^H:md=\E2n:me=\E0n:mr=\E1n:nd=\Er:nw=^M^J:se=\E0n:sf=^J:\
:so=\E1n:ta=^I:ue=\E0n:up=\Eu:us=\E4n:ve=\Eh:vi=\E9h:\
:vs=\E0h:
mgr-sun|Mgr window with Sun keyboard:\
:%1=\E[207z:%6=\E[198z:&8=\E[195z:@0=\E[200z:@5=\E[197z:\
:@7=\E[220z:@8=\E[250z:F1=\E[234z:F2=\E[235z:K1=\E[214z:\
:K2=\E[218z:K3=\E[216z:K4=\E[220z:K5=\E[222z:k1=\E[224z:\
:k2=\E[225z:k3=\E[226z:k4=\E[227z:k5=\E[228z:k6=\E[229z:\
:k7=\E[230z:k8=\E[231z:k9=\E[232z:k;=\E[233z:kN=\E[222z:\
:kP=\E[216z:kh=\E[214z:tc=mgr:
mgr-linux|Mgr window with Linux keyboard:\
:@7=\E[4~:F1=\E[23~:F2=\E[24~:K1=\E[H:K2=\E[G:K3=\E[5~:\
:K4=\E[Y:K5=\E[6~:k0=\E[[J:k1=\E[[A:k2=\E[[B:k3=\E[[C:\
:k4=\E[[D:k5=\E[[E:k6=\E[17~:k7=\E[18~:k8=\E[19~:\
:k9=\E[20~:k;=\E[21~:kD=\E[3~:kN=\E[6~:kP=\E[5~:kh=\E[1~:\
:tc=mgr:
#### SIMPLETERM
# st.suckless.org
# st-0.1.1
#
# Note: the original terminfo description uses leading blank to persuade
# ncurses to use "st" as its name. Proper fix for that is to use "st" as an
# alias.
#
# Reading the code shows it should work for aixterm 16-colors
# - added st-16color
#
# Using tack:
# - set eo (erase-overstrike)
# - set xenl
# - tbc doesn't work
# - hts works
# - cbt doesn't work
# - shifted cursor-keys send sequences like rxvt
# - sgr referred to unimplemented "invis" mode.
# Fixes: add eo and xenl per tack, remove nonworking cbt, hts and tbc, invis
simpleterm|st| simpleterm:\
:am:eo:mi:ms:ul:xn:\
:Co#8:NC#3:co#80:it#8:li#24:pa#64:\
:@7=\E[4~:AB=\E[4%dm:AF=\E[3%dm:AL=\E[%dL:DO=\E[%dB:\
:F1=\E[23~:F2=\E[24~:IC=\E[%d@:RI=\E[%dC:SF=\E[%dS:\
:UP=\E[%dA:\
:ac=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
:ae=\E(B:al=\E[L:as=\E(0:bl=^G:cd=\E[J:ce=\E[K:ch=\E[%i%dG:\
:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
:dc=\E[P:dl=\E[M:do=^J:ei=:ho=\E[H:im=:k1=\EOP:k2=\EOQ:\
:k3=\EOR:k4=\EOS:k5=\E[15~:k6=\E[17~:k7=\E[18~:k8=\E[19~:\
:k9=\E[20~:k;=\E[21~:kD=\E[3~:kN=\E[6~:kP=\E[5~:kb=\177:\
:kd=\E[B:kh=\E[1~:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:md=\E[1m:\
:me=\E[0m:mr=\E[7m:nd=\E[C:op=\E[37;40m:rc=\E8:sc=\E7:\
:se=\E[m:sf=^J:so=\E[7m:ta=^I:ue=\E[m:up=\E[A:us=\E[4m:\
:ve=\E[?12l\E[?25h:vi=\E[?25l:
st-16color|simpleterm with 16-colors:\
:tc=ibm+16color:tc=simpleterm:
# 256 colors "works", but when running xterm's test-scripts, some garbage is
# shown in the titlebar.
st-256color|simpleterm with 256 colors:\
:cc@:\
:Ic@:tc=simpleterm:tc=xterm+256color:
### TERMINATOR
# http://software.jessies.org/terminator/
# Tested using their Debian package org.jessies.terminator 6.104.3256 on 64-bit
# Debian/current -TD (2011/8/20)
#
# There are some packaging problems:
# a) using Java, the program starts off using 50Mb, and climbs from there,
# up to 114Mb after testing (no scrollback).
# b) it insists on reinstalling its terminal description in $HOME/.terminfo
# (two copies, just in case the host happens to be Mac OS X).
# I deleted this after testing with tack.
#
# Issues/features found with tack:
# a) tbc does not work (implying that hts also is broken).
# Comparing with the tabs utility shows a problem with the last tabstop on
# a line.
# b) has xterm-style shifted function-key strings
# meta also is used, but control is ignored.
# c) has xterm-style modifiers for cursor keys (shift, control, shift+control, meta)
# d) some combinations of shift/control send xterm-style sequences for
# insert/delete/home/end.
# e) numeric keypad sends only numbers (compare with vttest).
# f) meta mode (km) is not implemented.
#
# Issues found with ncurses test-program:
# a) bce is inconsistently implemented
# b) widths of Unicode values above 256 do not always agree with wcwidth.
#
# Checked with vttest, found low degree of compatibility there.
#
# Checked with xterm's scripts, found that the 256-color palette is fixed.
#
# Fixes:
# a) add sgr string
# b) corrected sgr0 to reset alternate character set
# c) modified smacs/rmacs to use SCS rather than SI/SO
# d) removed bce
# e) removed km
# (sgr removed to fit entry within 1023 bytes)
# (acsc removed to fit entry within 1023 bytes)
# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
terminator|Terminator no line wrap:\
:eo:mi:ms:xn:xo:\
:co#80:it#8:li#24:lm#0:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:\
:RI=\E[%dC:UP=\E[%dA:ae=\E(B:al=\E[L:as=\E(0:cd=\E[J:\
:ce=\E[K:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:\
:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:\
:ds=\E]2;\007:ei=\E[4l:fs=^G:ho=\E[H:i1=\E[?47l\E=\E[?1l:\
:im=\E[4h:is=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l:\
:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k5=\E[15~:k6=\E[17~:\
:k7=\E[18~:k8=\E[19~:k9=\E[20~:kD=\E[3~:kI=\E[2~:kN=\E[6~:\
:kP=\E[5~:kb=^H:kd=\E[B:kh=\E[1~:kl=\E[D:kr=\E[C:ku=\E[A:\
:le=^H:md=\E[1m:me=\E[0m:mr=\E[7m:nd=\E[C:rc=\E8:sc=\E7:\
:se=\E[27m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
:te=\E[?47l\E8:ti=\E7\E[?47h:ts=\E]2;:ue=\E[24m:up=\E[A:\
:us=\E[4m:vb=^G:ve=\E[?25h:vi=\E[?25l:
######## UNIX VIRTUAL TERMINALS, VIRTUAL CONSOLES, AND TELNET CLIENTS
#
# Columbus UNIX virtual terminal. This terminal also appears in
# UNIX 4.0 and successors as line discipline 1 (?), but is
# undocumented and does not really work quite right.
cbunix|cb unix virtual terminal:\
:am:bs:da:db:\
:co#80:li#24:lm#0:\
:al=\EP:bl=^G:cd=\EL:ce=\EK:cl=\EL:cm=\EG%r%.%.:cr=^M:\
:dc=\EM:dl=\EN:do=^J:ei=:ic=\EO:im=:kd=\EB:kh=\EE:kl=\ED:\
:kr=\EC:ku=\EA:le=^H:nd=\EC:se=\Eb^D:sf=^J:so=\Ea^D:\
:ue=\Eb^A:up=\EA:us=\Ea^A:
# (vremote: removed obsolete ":nl@:" -- esr)
vremote|virtual remote terminal:\
:am@:\
:co#79:tc=cbunix:
pty|4bsd pseudo teletype:\
:cm=\EG%+ %+ :se=\Eb$:so=\Ea$:ue=\Eb!:us=\Ea!:tc=cbunix:
# The codes supported by the term.el terminal emulation in GNU Emacs 19.30
eterm|gnu emacs term.el terminal emulation:\
:am:mi:xn:\
:co#80:li#24:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:al=\E[L:bl=^G:cb=\E[1K:\
:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:\
:cs=\E[%i%d;%dr:dc=\E[P:dl=\E[M:do=^J:ei=\E[4l:ho=\E[H:\
:im=\E[4h:le=^H:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:se=\E[m:\
:sf=^J:so=\E[7m:ta=^I:te=\E[2J\E[?47l\E8:ti=\E7\E[?47h:\
:ue=\E[m:up=\E[A:us=\E[4m:
# The codes supported by the term.el terminal emulation in GNU Emacs 22.2
eterm-color|Emacs term.el terminal emulator term-protocol-version 0.96:\
:am:mi:ms:xn:\
:Co#8:co#80:li#24:pa#64:\
:@7=\E[4~:AB=\E[%+(m:AF=\E[%+^^m:AL=\E[%dL:DC=\E[%dP:\
:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:LE=\E[%dD:RI=\E[%dC:\
:UP=\E[%dA:al=\E[L:bl=^G:cb=\E[1K:cd=\E[J:ce=\E[K:\
:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:dc=\E[P:\
:dl=\E[M:do=^J:ei=\E[4l:ho=\E[H:im=\E[4h:kD=\E[3~:kI=\E[2~:\
:kN=\E[6~:kP=\E[5~:kb=\177:kd=\EOB:kh=\E[1~:kl=\EOD:\
:kr=\EOC:ku=\EOA:le=^H:mb=\E[5m:md=\E[1m:me=\E[m:mk=\E[8m:\
:mr=\E[7m:nd=\E[C:op=\E[39;49m:r1=\Ec:rc=\E8:sc=\E7:\
:se=\E[27m:sf=^J:so=\E[7m:sr=\EM:ta=^I:u6=\E[%i%d;%dR:\
:u7=\E[6n:ue=\E[24m:up=\E[A:us=\E[4m:
# Entries for use by the `screen' program by Juergen Weigert,
# Michael Schroeder, Oliver Laumann. The screen and
# screen-w entries came with version 3.7.1. The screen2 and screen3 entries
# come from University of Wisconsin and may be older.
# (screen: added :ve: on ANSI model -- esr)
#
# 'screen' defines extensions to termcap. Some are used in its terminal
# description:
# G0 (bool) Terminal can deal with ISO 2022 font selection sequences.
# AX (bool) Does understand ANSI set default fg/bg color
# (\E[39m / \E[49m).
# S0 (str) Switch charset 'G0' to the specified charset.
# E0 (str) Switch charset 'G0' back to standard charset.
#
# tested with screen 3.09.08
screen|VT 100/ANSI X3.64 virtual terminal:\
:am:bs:km:mi:ms:pt:xn:G0:\
:Co#8:NC@:co#80:it#8:li#24:pa#64:U8#1:\
:@7=\E[4~:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:\
:F1=\E[23~:F2=\E[24~:IC=\E[%d@:Km=\E[M:LE=\E[%dD:\
:RI=\E[%dC:UP=\E[%dA:\
:ac=++,,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
:ae=^O:al=\E[L:as=^N:bl=^G:bt=\E[Z:cb=\E[1K:cd=\E[J:ce=\E[K:\
:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:eA=\E(B\E)0:ei=\E[4l:\
:ho=\E[H:im=\E[4h:is=\E)0:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:\
:k5=\E[15~:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:\
:k;=\E[21~:kB=\E[Z:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:\
:kb=^H:kd=\EOB:ke=\E[?1l\E>:kh=\E[1~:kl=\EOD:kr=\EOC:\
:ks=\E[?1h\E=:ku=\EOA:le=^H:mb=\E[5m:md=\E[1m:me=\E[0m:\
:mr=\E[7m:nd=\E[C:nw=\EE:rc=\E8:rs=\Ec\E[?1000l\E[?25h:\
:sc=\E7:se=\E[23m:sf=^J:so=\E[3m:sr=\EM:st=\EH:ta=^I:\
:te=\E[?1049l:ti=\E[?1049h:ue=\E[24m:up=\EM:us=\E[4m:\
:vb=\Eg:ve=\E[34h\E[?25h:vi=\E[?25l:vs=\E[34l:E0=\E(B:\
:S0=\E(%p1%c:tc=ecma+color:
# The bce and status-line entries are from screen 3.9.13 (and require some
# changes to .screenrc).
screen-bce|VT 100/ANSI X3.64 virtual terminal with bce:\
:ut:\
:ec@:tc=screen:
screen-s|VT 100/ANSI X3.64 virtual terminal with hardstatus line:\
:ds=\E_\E\\:fs=\E\\:ts=\E_:tc=screen:
# ======================================================================
# Entries for GNU Screen with 16 colors.
# Those variations permit to benefit from 16 colors palette, and from
# bold font and blink attribute separated from bright colors. But they
# are less portable than the generic "screen" 8 color entries: Their
# usage makes real sense only if the terminals you attach and reattach
# do all support 16 color palette.
screen-16color|GNU Screen with 16 colors:\
:tc=ibm+16color:tc=screen:
screen-16color-s|GNU Screen with 16 colors and status line:\
:tc=ibm+16color:tc=screen-s:
screen-16color-bce|GNU Screen with 16 colors and BCE:\
:tc=ibm+16color:tc=screen-bce:
screen-16color-bce-s|GNU Screen with 16 colors, BCE, and status line:\
:ut:tc=ibm+16color:tc=screen-s:
# ======================================================================
# Entries for GNU Screen 4.02 with --enable-colors256.
screen-256color|GNU Screen with 256 colors:\
:cc@:\
:Ic@:tc=xterm+256color:tc=screen:
screen-256color-s|GNU Screen with 256 colors and status line:\
:cc@:\
:Ic@:tc=xterm+256color:tc=screen-s:
screen-256color-bce|GNU Screen with 256 colors and BCE:\
:cc@:\
:Ic@:tc=xterm+256color:tc=screen-bce:
screen-256color-bce-s|GNU Screen with 256 colors, BCE, and status line:\
:cc@:ut:\
:Ic@:tc=xterm+256color:tc=screen-s:
# ======================================================================
# Read the fine manpage:
# When screen tries to figure out a terminal name for
# itself, it first looks for an entry named "screen.<term>",
# where <term> is the contents of your $TERM variable. If
# no such entry exists, screen tries "screen" (or "screen-w"
# if the terminal is wide (132 cols or more)). If even this
# entry cannot be found, "vt100" is used as a substitute.
#
# Notwithstanding the manpage, screen uses its own notion of the termcap
# and some keys from "screen.<term>" are ignored. Here is an entry which
# covers those (tested with screen 4.00.02) -TD
screen+fkeys|function-keys according to screen:\
:*6@:@0@:@7=\E[4~:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:kh=\E[1~:
#
# Here are a few customized entries which are useful -TD
#
# Notes:
# (a) screen does not support invis.
# (b) screen's implementation of bw is incorrect according to tack.
# (c) screen appears to hardcode the strings for khome/kend, making it
# necessary to override the "use=" clause's values (screen+fkeys).
# (d) screen sets $TERMCAP to a termcap-formatted copy of the 'screen' entry,
# which is NOT the same as the terminfo screen.<term>.
# (e) when screen finds one of these customized entries, it sets $TERM to
# match. Hence, no "screen.xterm" entry is provided, since that would
# create heartburn for people running remote xterm's.
#
# xterm (-xfree86 or -r6) does not normally support kIC, kNXT and kPRV
# since the default translations override the built-in keycode
# translation. They are suppressed here to show what is tested by tack.
screen.xterm-xfree86|screen.xterm-new|screen customized for modern xterm:\
:bw:ut@:\
:#3@:%c@:%e@:mk@:ml@:mu@:tc=screen+fkeys:tc=xterm-new:
# xterm-r6 does not really support khome/kend unless it is propped up by
# the translations resource.
screen.xterm-r6|screen customized for X11R6 xterm:\
:bw:tc=screen+fkeys:tc=xterm-r6:
# Color applications running in screen and TeraTerm do not play well together
# on Solaris because Sun's curses implementation gets confused.
screen.teraterm|disable ncv in teraterm:\
:NC#127:\
:ac=+\020,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376:\
:tc=screen+fkeys:tc=screen:
# Other terminals
screen.rxvt|screen in rxvt:\
:bw:XT:\
:kd=\EOB:kl=\EOD:kr=\EOC:ku=\EOA:vb@:vs@:tc=screen+fkeys:\
:tc=vt100+enq:tc=rxvt+pcfkeys:tc=vt220+keypad:tc=screen:
screen.Eterm|screen in Eterm:\
:tc=screen+fkeys:tc=Eterm:
screen.mrxvt|screen in mrxvt:\
:tc=screen+fkeys:tc=mrxvt:
screen.vte|screen in any VTE-based terminal:\
:tc=screen+fkeys:tc=vte:
screen.gnome|screen in GNOME Terminal:\
:tc=screen+fkeys:tc=gnome:
screen.konsole|screen in KDE console window:\
:tc=screen+fkeys:tc=konsole:
# fix the backspace key
screen.linux|screen in linux console:\
:bw:\
:kB@:kb=\177:tc=screen+fkeys:tc=screen:
screen.mlterm|screen in mlterm:\
:tc=screen+fkeys:tc=mlterm:
# The default "screen" entry is reasonably portable, but not optimal for the
# most widely-used terminal emulators. The "bce" capability is supported in
# screen since 3.9.13, and when used, will require fewer characters to be sent
# to the terminal for updates.
#
# If you are using only terminals which support bce, then you can use this
# feature in your screen configuration.
#
# Adding these lines to your ".screenrc" file will allow using these customized
# entries:
# term screen-bce
# bce on
# defbce on
screen-bce.xterm-new|screen optimized for modern xterm:\
:ut:\
:ec@:tc=screen.xterm-new:
screen-bce.rxvt|screen optimized for rxvt:\
:ut:\
:ec@:tc=screen.rxvt:
screen-bce.Eterm|screen optimized for Eterm:\
:ut:\
:ec@:tc=screen.Eterm:
screen-bce.mrxvt|screen optimized for mrxvt:\
:ut:\
:ec@:tc=screen.mrxvt:
screen-bce.gnome|screen optimized for GNOME-Terminal:\
:ut:\
:ec@:tc=screen.gnome:
screen-bce.konsole|screen optimized for KDE console window:\
:ut:\
:ec@:tc=screen.konsole:
screen-bce.linux|screen optimized for linux console:\
:ut:\
:ec@:tc=screen.linux:
screen-bce.mlterm|screen optimized for mlterm:\
:ut:\
:ec@:tc=screen.mlterm:
screen-w|VT 100/ANSI X3.64 virtual terminal with 132 cols:\
:co#132:tc=screen:
screen2|old VT 100/ANSI X3.64 virtual terminal:\
:co#80:it#8:li#24:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:al=\E[L:bt=\E[Z:cd=\E[J:\
:ce=\E[K:cl=\E[2J\E[H:cm=\E[%i%d;%dH:cr=^M:ct=\E[3g:\
:dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:ic=:im=\E[4h:k0=\E~:\
:k1=\ES:k2=\ET:k3=\EU:k4=\EV:k5=\EW:k6=\EP:k7=\EQ:k8=\ER:\
:k9=\E0I:kb=^H:kd=\EB:kh=\EH:kl=\ED:kr=\EC:ku=\EA:le=^H:\
:me=\E[m:nd=\E[C:nw=^M^J:r1=\Ec:rc=\E8:sc=\E7:se=\E[23m:\
:sf=^J:so=\E[3m:sr=\EM:st=\EH:ta=^I:ue=\E[24m:up=\E[A:\
:us=\E[4m:
# (screen3: removed unknown ":xv:LP:G0:" -- esr)
screen3|older VT 100/ANSI X3.64 virtual terminal:\
:km:mi:ms:\
:co#80:it#8:li#24:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:al=\E[L:bl=^G:bt=\E[Z:\
:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:\
:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:ei=\E[4l:\
:ho=\E[H:im=\E[4h:is=\E)0:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:\
:kb=^H:kd=\EOB:ke=\E>:kl=\EOD:kr=\EOC:ks=\E=:ku=\EOA:le=^H:\
:mb=\E[5m:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:nw=\EE:r1=\Ec:\
:rc=\E8:sc=\E7:se=\E[23m:sf=^J:so=\E[3m:sr=\EM:st=\EH:ta=^I:\
:ue=\E[24m:up=\EM:us=\E[4m:
# Francesco Potorti <F.Potorti@cnuce.cnr.it>:
# NCSA telnet is one of the most used telnet clients for the Macintosh. It has
# been maintained until recently by the National Center for Supercomputer
# Applications, and it is feature rich, stable and free. It can be downloaded
# from www.ncsa.edu. This terminfo description file is based on xterm-vt220,
# xterm+sl, and the docs at NCSA. It works well.
#
# NCSA Telnet 2.6 for Macintosh in vt220 8-bit emulation mode
# The terminal options should be set as follows:
# Xterm sequences ON
# use VT wrap mode ON
# use Emacs arrow keys OFF
# CTRL-COMND is Emacs meta ON
# 8 bit mode ON
# answerback string: "ncsa-vt220-8"
# setup keys: all disabled
#
# Application mode is not used.
#
# Other special mappings:
# Apple VT220
# HELP Find
# HOME Insert here
# PAGEUP Remove
# DEL Select
# END Prev Screen
# PAGEDOWN Next Screen
#
# Though it supports ANSI color, NCSA Telnet uses color to represent blinking
# text.
#
# The status-line manipulation is a mapping of the xterm-compatible control
# sequences for setting the window-title. So you must use tsl and fsl in
# pairs, since the latter ends the string that is loaded to the window-title.
# (sgr removed to fit entry within 1023 bytes)
# (acsc removed to fit entry within 1023 bytes)
# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
ncsa-m|ncsa-vt220-8|NCSA Telnet 2.6 for Macintosh in vt220-8 mode:\
:am:hs:km:mi:ms:xn:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:ae=\E(B:al=\E[L:as=\E(0:\
:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:\
:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:\
:ds=\E]0;\007:ei=\E[4l:fs=^G:ho=\E[H:\
:if=/usr/share/tabset/vt100:im=\E[4h:\
:is=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>:k1=\E[17~:\
:k2=\E[18:k3=\E[19~:k4=\E[20~:k5=\E[21~:k6=\E[23~:\
:k7=\E[24~:k8=\E[25~:k9=\E[26~:kD=\E[4~:kN=\E[6~:kP=\E[3~:\
:kb=^H:kd=\E[B:kh=\E[2~:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:\
:mb=\E[5m:md=\E[1m:me=\E[0m:mr=\E[7m:nd=\E[C:rc=\E8:\
:rs=\E7\E[r\E8\E[m\E[?7h\E[?1;4;6l\E[4l\E>:sc=\E7:\
:se=\E[27m:sf=150*\n:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
:te=\E[2J\E8:ti=\E7:ts=\E]0;:ue=\E[24m:up=\E[A:us=\E[4m:\
:vb=\E[?5h\E[?5l:ve=\E[?25h:vi=\E[?25l:tc=ansi+enq:
ncsa|NCSA Telnet 2.7 for Macintosh in vt220-8 mode:\
:tc=ncsa-m:tc=klone+color:
ncsa-ns|NCSA Telnet 2.7 for Macintosh in vt220-8 mode:\
:hs@:\
:ds@:fs@:ts@:tc=ncsa:
ncsa-m-ns|NCSA Telnet 2.6 for Macintosh in vt220-8 mode:\
:hs@:\
:ds@:fs@:ts@:tc=ncsa-m:
# alternate -TD:
# The documented function-key mapping refers to the Apple Extended Keyboard
# (e.g., NCSA Telnet's F1 corresponds to a VT220 F6). We use the VT220-style
# codes, however, since the numeric keypad (VT100) PF1-PF4 are available on
# some keyboards and many applications require these as F1-F4.
#
ncsa-vt220|NCSA Telnet using vt220-compatible function keys:\
:F1=\E[23~:F2=\E[24~:F3=\E[25~:F4=\E[26~:F5=\E[28~:\
:F6=\E[29~:F7=\E[31~:F8=\E[32~:F9=\E[33~:FA=\E[34~:\
:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k6=\E[17~:k7=\E[18~:\
:k8=\E[19~:k9=\E[20~:k;=\E[21~:tc=ncsa:
#### Pilot Pro Palm-Top
#
# Termcap for Top Gun Telnet and SSH on the Palm Pilot.
# http://www.ai/~iang/TGssh/
pilot|tgtelnet|Top Gun Telnet on the Palm Pilot Professional:\
:am:bs:xn:\
:co#39:li#16:\
:bl=^G:cl=\Ec:cm=\Em%+ %+ :cr=^M:do=^J:ho=\Em\040\040:\
:kN=^L:kP=^K:kb=^H:kd=^J:kl=^H:le=^H:nw=\Em~\040:se=\EB:\
:sf=^J:so=\Eb:ta=^I:
# From: Federico Bianchi <bianchi@www.arte.unipi.it>
# These entries are for the Embeddable Linux Kernel System (ELKS)
# project - an heavily stripped down Linux to be run on 16 bit
# boxes or, eventually, to be used in embedded systems - and have been
# adapted from the stock ELKS termcap. The project itself looks stalled,
# and the latest improvements I know of date back to March 2000.
#
# To cope with the ELKS dumb console I added an "elks-glasstty" entry;
# as an added bonus, this deals with all the capabilities common to
# both VT52 and ANSI (or, eventually, "special") modes.
elks-glasstty|ELKS glass-TTY capabilities:\
:am:bs:\
:co#80:it#8:li#25:\
:bl=^G:cr=^M:kb=^H:kd=^J:kl=^H:nw=^M^J:sf=^J:ta=^I:
elks-vt52|ELKS vt52 console:\
:ce=\EK:cl=\EH\EJ:cm=\EY%+ %+ :do=\EB:ho=\EH:le=\ED:nd=\EC:\
:up=\EA:tc=elks-glasstty:
elks-ansi|ELKS ANSI console:\
:ce=\E[K:cl=\E[H\E[2J:cm=\E[%i%d;%dH:do=\E[B:ho=\E[H:\
:le=\E[D:nd=\E[C:se=\E[m:so=\E[7m:up=\E[A:\
:tc=elks-glasstty:
# As a matter of fact, ELKS 0.0.83 on PCs defaults to ANSI emulation
# instead of VT52, but the "elks" entry still refers to the latter.
elks|default ELKS console:\
:tc=elks-vt52:
# Project SIBO (for Psion 3 palmtops) console is identical to the ELKS
# one but in screen size
sibo|ELKS SIBO console:\
:co#61:it#8:li#20:tc=elks-vt52:
######## COMMERCIAL WORKSTATION CONSOLES
#
#### Alpha consoles
#
# This is from the OSF/1 Release 1.0 termcap file
pccons|pcconsole|ANSI (mostly) Alpha PC console terminal emulation:\
:am:xo:\
:co#80:li#25:\
:al=\E[L:bl=^G:ce=\E[K:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:\
:dc=\E[P:dl=\E[M:do=^J:ei=:ho=\E[H:ic=\E[@:im=:kb=^H:kd=\E[B:\
:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:me=\E[m:mr=\E[7m:\
:nd=\E[C:nw=^M^J:se=\E[m:so=\E[7m:ta=^I:up=\E[A:
#### Sun consoles
#
# :is1: resets scrolling region in case a previous user had used "tset vt100"
oldsun|Sun Microsystems Workstation console:\
:am:bs:km:mi:ms:\
:co#80:it#8:li#34:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:IC=\E[%d@:al=\E[L:bl=^G:\
:cd=\E[J:ce=\E[K:cl=^L:cm=\E[%i%d;%dH:cr=^M:dc=\E[P:\
:dl=\E[M:do=\E[B:ei=:i1=\E[1r:ic=\E[@:im=:k1=\EOP:k2=\EOQ:\
:k3=\EOR:k4=\EOS:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:\
:le=^H:me=\E[m:nd=\E[C:se=\E[m:sf=^J:so=\E[7m:ta=^I:up=\E[A:
# From: Alexander Lukyanov <lav@video.yars.free.net>, 14 Nov 1995
# :li: capability later corrected by J.T. Conklin <jtc@cygnus.com>
# SGR 1, 4 aren't supported - removed bold/underline (T.Dickey 17 Jan 1998)
sun-il|Sun Microsystems console with working insert-line:\
:am:km:ms:\
:co#80:li#34:\
:%7=\E[194z:&5=\E[193z:&8=\E[195z:@7=\E[220z:AL=\E[%dL:\
:DC=\E[%dP:DL=\E[%dM:F1=\E[234z:F2=\E[235z:IC=\E[%d@:\
:K2=\E[218z:al=\E[L:bl=^G:cd=\E[J:ce=\E[K:cl=^L:\
:cm=\E[%i%d;%dH:cr=^M:dc=\E[P:dl=\E[M:do=^J:ei=:ic=\E[@:im=:\
:k1=\E[224z:k2=\E[225z:k3=\E[226z:k4=\E[227z:k5=\E[228z:\
:k6=\E[229z:k7=\E[230z:k8=\E[231z:k9=\E[232z:k;=\E[233z:\
:kD=\177:kI=\E[247z:kN=\E[222z:kP=\E[216z:kb=^H:kd=\E[B:\
:kh=\E[214z:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:me=\E[m:mr=\E[7m:\
:nd=\E[C:rs=\E[s:se=\E[m:sf=^J:so=\E[7m:ta=^I:u8=\E[1t:\
:u9=\E[11t:ue@:up=\E[A:
# On some versions of CGSIX framebuffer firmware (SparcStation 5), :al:/:AL:
# flake out on the last line. Unfortunately, without them the terminal has no
# way to scroll.
sun-cgsix|sun-ss5|Sun SparcStation 5 console:\
:AL@:al@:tc=sun-il:
# If you are using an SS5, change the sun definition to use sun-ss5.
sun|sun1|sun2|Sun Microsystems Inc. workstation console:\
:tc=sun-il:
# From: <john@ucbrenoir> Tue Sep 24 13:14:44 1985
sun-s|Sun Microsystems Workstation window with status line:\
:hs:\
:ds=\E]l\E\\:fs=\E\\:ts=\E]l:tc=sun:
sun-e-s|sun-s-e|Sun Microsystems Workstation with status hacked for emacs:\
:hs:\
:ds=\E]l\E\\:fs=\E\\:ts=\E]l:tc=sun-e:
sun-48|Sun 48-line window:\
:co#80:li#48:tc=sun:
sun-34|Sun 34-line window:\
:co#80:li#34:tc=sun:
sun-24|Sun 24-line window:\
:co#80:li#24:tc=sun:
sun-17|Sun 17-line window:\
:co#80:li#17:tc=sun:
sun-12|Sun 12-line window:\
:co#80:li#12:tc=sun:
sun-1|Sun 1-line window for sysline:\
:es:hs:\
:co#80:li#1:\
:ds=^L:fs=\E[K:ts=^M:tc=sun:
sun-e|sun-nic|sune|Sun Microsystems Workstation without insert character:\
:ei@:ic@:im@:tc=sun:
sun-c|sun-cmd|Sun Microsystems Workstation console with scrollable history:\
:li#35:\
:te=\E[>4h:ti=\E[>4l:tc=sun:
sun-type4|Sun Workstation console with type 4 keyboard:\
:kd=\E[221z:kl=\E[217z:kr=\E[219z:ku=\E[215z:tc=sun-il:
# Most of the current references to sun-color are from users wondering why this
# is the default on install. Details from reading the wscons manpage, adding
# cub, etc., here (rather than in the base sun-il entry) since it is not clear
# when those were added -TD (2005-05-28)
#
# According to wscons manpage, color is supported only on IA systems.
# Sun's terminfo entry documents bold and smul/rmul capabilities, but wscons
# does not list these. It also sets ncv#3, however that corresponds to
# underline and standout.
#
# Since the documentation and terminfo do not agree, see also current code at
# http://src.opensolaris.org/source/xref/onnv/onnv-gate/usr/src/uts/common/io/tem_safe.c
#
# That (actually a different driver which "supports" sun-color) also supports
# these features:
# vpa=\E[%i%p1%dd
# hpa=\E[%i%p1%d`
# cbt=\E[Z
# dim=\E[2m
# blink=\E[5m
# It supports bold, but not underline -TD (2009-09-19)
sun-color|Sun Microsystems Workstation console with color support (IA systems):\
:Co#8:NC#3:pa#64:\
:AB=\E[4%dm:AF=\E[3%dm:DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:\
:UP=\E[%dA:ho=\E[H:op=\E[0m:so=\E[1m:tc=sun:
#### Iris consoles
#
# (wsiris: this had extension capabilities
# :HS=\E7F2:HE=\E7F7:\
# :CT#2:CZ=*Bblack,red,green,yellow,blue,magenta,cyan,*Fwhite:
# See the note on Iris extensions near the end of this file.
# Finally, removed suboptimal :cl:=\EH\EJ and added :do: &
# :vb: from BRL -- esr)
wsiris|iris40|iris emulating a 40 line visual 50 (approximately):\
:am:bs:nc:pt:\
:co#80:it#8:kn#3:li#40:\
:al=\EL:bl=^G:cd=\EJ:ce=\EK:cl=\Ev:cm=\EY%+ %+ :dl=\EM:\
:do=\EB:ho=\EH:is=\E7B0\E7F7\E7C2\E7R3:k0=\E0:k1=\E1:\
:k2=\E2:k3=\E3:k4=\E4:k5=\E5:k6=\E6:k7=\E7:k8=\E8:k9=\E9:\
:kd=\EB:kl=\ED:kr=\EC:ku=\EA:le=^H:me=\E7F7:mh=\E7F2:nd=\EC:\
:nl=\EB:se=\E0@:sf=^J:so=\E9P:sr=\EI:ta=^I:ue=\E7R3\E0@:\
:up=\EA:us=\E7R2\E9P:vb=\E7F4\E7B1\013\E7F7\E7B0:ve=\E>:\
:vs=\E;:
#### NeWS consoles
#
# Console terminal windows under the NeWS (Sun's Display Postscript windowing
# environment). Note: these have nothing to do with Sony's News workstation
# line.
#
# Entry for NeWS's psterm from Eric Messick & Hugh Daniel
# (psterm: unknown ":sl=\EOl:el=\ENl:" removed -- esr)
psterm|psterm-basic|NeWS psterm-80x34:\
:am:bs:hs:km:ul:\
:co#80:it#8:li#34:\
:al=\EA:cd=\EB:ce=\EC:cl=^L:cm=\E%d;%d;:cs=\EE%d;%d;:\
:dc=\EF:dl=\EK:do=\EP:ei=\ENi:fs=\ENl:ho=\ER:i1=\EN*:\
:im=\EOi:kd=\E[B:kl=\E[D:kr=\E[C:ku=\E[A:le=\ET:ll=\EU:\
:mb=\EOb:md=\EOd:me=\EN*:mr=\EOr:nd=\EV:rc=^\:sc=^]:se=\ENo:\
:sf=\EW:so=\EOo:sr=\EX:ta=^I:te=\ENt:ti=\EOt:ts=\EOl:\
:ue=\ENu:up=\EY:us=\EOu:vb=\EZ:
psterm-96x48|NeWS psterm 96x48:\
:co#96:li#48:tc=psterm:
psterm-90x28|NeWS psterm 90x28:\
:co#90:li#28:tc=psterm:
psterm-80x24|NeWS psterm 80x24:\
:co#80:li#24:tc=psterm:
# This is a faster termcap for psterm. Warning: if you use this termcap,
# some control characters you type will do strange things to the screen.
# (psterm-fast: unknown ":sl=^Ol:el=^Nl:" -- esr)
psterm-fast|NeWS psterm fast version (flaky ctrl chars):\
:am:bs:hs:km:ul:\
:co#80:it#8:li#34:\
:al=^A:cd=^B:ce=^C:cl=^L:cm=\004%d;%d;:cs=\005%d;%d;:dc=^F:\
:dl=^K:do=^P:ei=^Ni:fs=^Nl:ho=^R:i1=^N*:im=^Oi:kd=\E[B:\
:kl=\E[D:kr=\E[C:ku=\E[A:le=^T:ll=^U:mb=^Ob:md=^Od:me=^N*:\
:mr=^Or:nd=^V:rc=^\:sc=^]:se=^No:sf=^W:so=^Oo:sr=^X:ta=^I:\
:te=^Nt:ti=^Ot:ts=^Ol:ue=^Nu:up=^Y:us=^Ou:vb=^Z:
#### NeXT consoles
#
# Use `glasstty' for the Workspace application
#
# From: Dave Wetzel <dave@turbocat.snafu.de> 22 Dec 1995
next|NeXT console:\
:am:xt:\
:co#80:it#8:li#24:\
:bl=^G:ce=\E[K:cl=^L:cm=\E[%i%d;%dH:cr=^M:do=^J:ho=\E[H:\
:kb=^H:kd=^J:kl=^H:le=^H:me=\E[m:nd=\E[C:nw=^M^J:se=\E[4;1m:\
:sf=^J:so=\E[4;2m:ta=^I:up=\E[A:
nextshell|NeXT Shell application:\
:am:\
:co#80:\
:bl=^G:cr=^M:do=^J:kb=^H:kd=^J:kl=^H:le=^H:nw=^M^J:ta=^I:
#### Sony NEWS workstations
#
# (news-unk: this had :KB=news: -- esr)
news-unk|SONY NEWS vt100 emulator common entry:\
:am:bs:pt:xn:\
:co#80:\
:AL=\E[%dL:DL=\E[%dM:al=\E[L:bl=^G:cd=\E[J:ce=\E[K:\
:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
:dl=\E[M:do=^J:ho=\E[H:if=/usr/share/tabset/vt100:\
:is=\E[?7h\E[?1l\E[?3l\E7\E8:k0=\EOY:k1=\EOP:k2=\EOQ:\
:k3=\EOR:k4=\EOS:k5=\EOT:k6=\EOU:k7=\EOV:k8=\EOW:k9=\EOX:\
:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:\
:ku=\EOA:le=^H:mb=\E[5m:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:\
:nl=^J:rc=\E8:rs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[r:\
:sc=\E7:se=\E[m:so=\E[7m:sr=\EM:ta=^I:ue=\E[m:up=\E[A:\
:us=\E[4m:
#
# (news-29: this had :TY=ascii: --esr)
news-29:\
:li#29:tc=news-unk:
# (news-29-euc: this had :TY=euc: --esr)
news-29-euc:\
:tc=news-29:
# (news-29-sjis: this had :TY=sjis: --esr)
news-29-sjis:\
:tc=news-29:
#
# (news-33: this had :TY=ascii: --esr)
news-33:\
:li#33:tc=news-unk:
# (news-33-euc: this had :TY=euc: --esr)
news-33-euc:\
:tc=news-33:
# (news-33-sjis: this had :TY=sjis: --esr)
news-33-sjis:\
:tc=news-33:
#
# (news-42: this had :TY=ascii: --esr)
news-42:\
:li#42:tc=news-unk:
# (news-42-euc: this had :TY=euc: --esr)
news-42-euc:\
:tc=news-42:
# (news-42-sjis: this had :TY=sjis: --esr)
news-42-sjis:\
:tc=news-42:
#
# NEWS-OS old termcap entry
#
# (news-old-unk: this had :KB=news:TY=sjis: --esr)
news-old-unk|SONY NEWS vt100 emulator common entry:\
:am:bs:pt:xn:\
:co#80:vt#3:\
:bl=^G:cd=\E[J:ce=\E[K:cl=\E[;H\E[2J:cm=\E[%i%d;%dH:cr=^M:\
:cs=\E[%i%d;%dr:do=^J:ho=\E[H:\
:if=/usr/share/tabset/vt100:k1=\EOP:k2=\EOQ:k3=\EOR:\
:k4=\EOS:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:kr=\EOC:\
:ks=\E[?1h\E=:ku=\EOA:le=^H:mb=\E[5m:md=\E[1m:me=\E[m:\
:mr=\E[7m:nd=\E[C:nl=^J:rc=\E8:\
:rs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:sc=\E7:se=\E[m:\
:so=\E[7m:sr=\EM:ta=^I:ue=\E[m:up=\E[A:us=\E[4m:
#
# (nwp512: this had :DE=^H:, which I think means :bs: --esr)
nwp512|news|nwp514|news40|vt100-bm|old sony vt100 emulator 40 lines:\
:bs:\
:li#40:\
:is=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8:\
:tc=news-old-unk:
#
# (nwp512-a: this had :TY=ascii: and the alias vt100-bm --esr)
nwp512-a|nwp514-a|news-a|news42|news40-a|sony vt100 emulator 42 line:\
:li#42:\
:is=\E[?7h\E[?1l\E[?3l\E7\E[1;42r\E8:tc=news-old-unk:
#
# (nwp-512-o: this had :KB=nwp410:DE=^H: I interpret the latter as :bs:. --esr)
nwp512-o|nwp514-o|news-o|news40-o|vt100-bm-o|sony vt100 emulator 40 lines:\
:bs:\
:li#40:\
:is=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8:\
:tc=news-old-unk:
#
# (nwp513: this had :DE=^H: and the alias vt100-bm --esr)
nwp513|nwp518|nwe501|newscbm|news31|sony vt100 emulator 33 lines:\
:bs:\
:li#31:\
:is=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8:\
:tc=news-old-unk:
#
# (nwp513-a: this had :TY=ascii: and :DE=^H:, which I interpret as :bs:; --esr)
# also the alias vt100-bm.
nwp513-a|nwp518-a|nwe501-a|nwp251-a|newscbm-a|news31-a|newscbm33|news33|old sony vt100 emulator 33 lines:\
:bs:\
:li#33:\
:is=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;33r\E8:\
:tc=news-old-unk:
#
# (nwp513-o: had :DE=^H:, I think that's :bs:; also the alias vt100-bm --esr)
nwp513-o|nwp518-o|nwe501-o|nwp251-o|newscbm-o|news31-o|old sony vt100 emulator 33 lines:\
:bs:\
:li#31:\
:is=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8:\
:tc=news-old-unk:
#
# (news28: this had :DE=^H:, I think that's :bs:, and :KB=nws1200: --esr)
news28|sony vt100 emulator 28 lines:\
:bs:\
:li#28:\
:is=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;28r\E8:\
:tc=news-old-unk:
#
# (news29: this had :TY=ascii:KB=nws1200:\ --esr)
news29|news28-a|sony vt100 emulator 29 lines:\
:li#29:\
:is=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;29r\E8:\
:tc=news-old-unk:
#
# (news511: this had :TY=sjis: --esr)
nwp511|nwp-511|nwp-511 vt100:\
:am:bs:pt:xn:\
:co#80:li#24:\
:al=\E[L:cd=30\E[J:ce=3\E[K:cl=20\E[;H\E[2J:\
:cm=\E[%i%d;%dH:dl=\E[M:do=\E[B:\
:is=\E[?5l\E[?1l\E>\E[?7h\E[?8h:k1=\EOP:k2=\EOQ:k3=\EOR:\
:k4=\EOS:k5=\EOT:k6=\E#W:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:\
:ku=\E[A:le=\E[D:nd=\E[C:\
:rs=\E7\E[r\E8\E[?5l\E[?1l\E>\E[?7h\E[?8h:se=2\E[m:\
:so=2\E[7m:sr=5\EM:ue=2\E[m:up=2\E[A:us=2\E[4m:\
:vb=\E[?5h\200\200\200\200\200\200\200\200\200\200\200\200\200\E[?5l:
# (news517: this had :TY=sjis:. --esr)
nwp517|nwp-517|nwp-517 vt200 80 cols 30 rows:\
:es:hs:\
:co#80:li#30:\
:ds=\E[1$~:fs=\E[0$}:i2=\E[2$~\n:\
:is=\E7\E[r\E8\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:\
:ts=\E[1$}\E[;%df:tc=vt200:
# (news517-w: this had :TY=sjis:. --esr)
nwp517-w|nwp-517-w|nwp-517 vt200 132 cols 50 rows:\
:es:hs:\
:co#132:li#50:\
:ds=\E[1$~:fs=\E[0$}:i2=\E[2$~\n:\
:is=\E7\E[r\E8\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h:\
:rs=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h:\
:ts=\E[1$}\E[;%df:tc=vt200:
#### Common Desktop Environment
#
# This ships with Sun's CDE in Solaris 2.5
# Corrected Sun Aug 9 1998 by Alexander V. Lukyanov <lav@video.yars.free.net>
dtterm|CDE desktop terminal:\
:am:mi:ms:xn:xo:\
:NC@:co#80:it#8:li#24:lm#0:\
:%1=\E[28~:*6=\E[4~:@0=\E[1~:AL=\E[%dL:DC=\E[%dP:\
:DL=\E[%dM:DO=\E[%dB:F1=\E[23~:F2=\E[24~:F3=\E[25~:\
:F4=\E[26~:F5=\E[28~:F6=\E[29~:F7=\E[31~:F8=\E[32~:\
:F9=\E[33~:FA=\E[34~:IC=\E[%d@:LE=\E[%dD:RA=\E[?7l:\
:RI=\E[%dC:SA=\E[?7h:UP=\E[%dA:\
:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
:ae=^O:al=\E[L:as=^N:bl=^G:cb=\E[1K:cd=\E[J:ce=\E[K:\
:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:eA=\E(B\E)0:ec=\E[%dX:\
:ei=\E[4l:ho=\E[H:im=\E[4h:\
:is=\E F\E>\E[?1l\E[?7h\E[?45l:k1=\E[11~:k2=\E[12~:\
:k3=\E[13~:k4=\E[14~:k5=\E[15~:k6=\E[17~:k7=\E[18~:\
:k8=\E[19~:k9=\E[20~:k;=\E[21~:kD=\E[3~:kI=\E[2~:kN=\E[6~:\
:kP=\E[5~:kb=^H:kd=\E[B:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:\
:mb=\E[5m:md=\E[1m:me=\E[0m:mh=\E[2m:mk=\E[8m:mr=\E[7m:\
:nd=\E[C:nw=\EE:rc=\E8:sc=\E7:se=\E[22;27m:sf=\ED:\
:so=\E[2;7m:sr=\EM:st=\EH:ta=^I:ue=\E[24m:up=\E[A:us=\E[4m:\
:vb=\E[?5h\E[?5l:ve=\E[?25h:vi=\E[?25l:tc=ecma+color:
#### Non-Unix Consoles
#
#### EMX termcap.dat compatibility modes
#
# Also (possibly only EMX, so we don't put it in ansi.sys, etc): set the
# no_color_video to inform the application that standout(1), underline(2)
# reverse(4) and invisible(64) don't work with color.
emx-base|DOS special keys:\
:bw:ut:\
:NC#71:it#8:\
:bl=^G:tc=ansi.sys:
# Except for the "-emx" suffixes, these are as distributed with EMX 0.9b,
# a Unix-style environment used on OS/2. (Note that the suffix makes some
# names longer than 14 characters, the nominal maximum).
#
# Removed: rmacs=\E[10m, smacs=\E[11m, because OS/2 does not implement acs.
ansi-emx|ANSI.SYS color:\
:am:eo:mi:ms:ut:xo:\
:Co#8:co#80:it#8:li#25:pa#64:\
:&7=^Z:AB=\E[4%dm:AF=\E[3%dm:DC=\E[%dp:IC=\E[%d@:K2=\E[G:\
:S2=\E[11m:S3=\E[10m:bl=^G:cd=\E[J:ce=\E[K:\
:cl=\E[1;33;44m\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:ct=\E[3g:\
:do=^J:ei=\E[4l:ho=\E[H:ic=\E[@:im=\E[4h:k0=\200D:kH=\200O:\
:kb=^H:le=^H:mb=\E[5m:md=\E[1m:me=\E[0m\E[1;33;44m:\
:mr=\E[5;37;41m:nd=\E[C:nw=^M^J:r1=\Ec:\
:se=\E[0;44m\E[1;33m:sf=^J:so=\E[0;31;47m:st=\EH:ta=^I:\
:u8=\E[?6c:u9=\E[c:ue=\E[0;44m\E[1;33m:up=\E[A:\
:us=\E[1;31;44m:vb=\E[?5h\E[?5l:ve=\E[?25h:vi=\E[?25l:\
:tc=emx-base:
# nice colors for Emacs (white on blue, mode line white on cyan)
ansi-color-2-emx|ANSI.SYS color 2:\
:AF=\E[3%dm:cl=\E[0;37;44m\E[H\E[J:me=\E[0;37;44m:\
:mr=\E[1;37;46m:r1=\Ec:se=\E[0;37;44m:so=\E[1;37;46m:\
:ue=\E[0;37;44m:us=\E[1;36;44m:tc=ansi-emx:
# nice colors for Emacs (white on black, mode line black on cyan)
ansi-color-3-emx|ANSI.SYS color 3:\
:AF=\E[3%dm:cl=\E[0;37;40m\E[H\E[J:me=\E[0;10m:\
:mr=\E[1;37;46m:r1=\Ec:se=\E[0;37;40m:so=\E[1;37;46m:\
:ue=\E[0;37;40m:us=\E[0;36;40m:tc=ansi-emx:
mono-emx|stupid monochrome ansi terminal with only one kind of emphasis:\
:am:\
:co#80:it#8:li#24:\
:K2=\E[G:ce=\E[K:cl=50\E[H\E[2J:cm=\E[%i%d;%dH:do=\E[B:\
:ho=\E[H:k0=\200D:k1=\200;:k2=\200<:k3=\200=:k4=\200>:\
:k5=\200?:k6=\200@:k7=\200A:k8=\200B:k9=\200C:kH=\200O:\
:kI=\200R:kN=\200Q:kP=\200I:kb=^H:kd=\200P:kh=\200G:\
:kl=\200K:kr=\200M:ku=\200H:le=\E[D:me=\E[0m:mr=\E[7m:\
:nd=\E[C:nw=^M^J:ta=^I:up=\E[A:
# Use this for cygwin32 (tested with beta 19.1)
# underline is colored bright magenta
# shifted kf1-kf12 are kf11-kf22
cygwinB19|ansi emulation for cygwin32:\
:@7=\E[4~:F1=\E[23~:F2=\E[24~:F3=\E[25~:F4=\E[26~:\
:F5=\E[28~:F6=\E[29~:F7=\E[31~:F8=\E[32~:F9=\E[33~:\
:FA=\E[34~:RA@:SA@:k1=\E[[A:k2=\E[[B:k3=\E[[C:k4=\E[[D:\
:k5=\E[[E:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:\
:k;=\E[21~:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:kd=\E[B:\
:kh=\E[1~:kl=\E[D:kr=\E[C:ku=\E[A:tc=ansi.sys:
# Use this for cygwin (tested with version 1.1.0).
# I've combined pcansi and linux. Some values of course were different and
# I've indicated which of these were and which I used.
# Cheers, earnie_boyd@yahoo.com
# several changes based on running with tack and comparing with older entry -TD
# more changes from csw:
# add cbt [backtab]
# remove eo [erase overstrike with blank]
# change clear was \E[H\E[J now \E[2J (faster?)
# remove cols
# remove lines
# remove ncv#3 [colors collide with highlights, bitmask] not applicable
# to MSDOS box?
# add cub [cursor back param]
# add cuf [cursor forward param]
# add cuu [cursor up param]
# add cud [cursor down param]
# add hs [has status line]
# add fsl [return from status line]
# add tsl [go to status line]
# add smacs [Start alt charset] (not sure if this works)
# add rmacs [End alt charset] (ditto)
# add smcup [enter_ca_mode] (save console; thanks Corinna)
# add rmcup [exit_ca_mode] (restore console; thanks Corinna)
# add kb2 [center of keypad]
# add u8 [user string 8] \E[?6c
# add el [clear to end of line] \E[K
# Notes:
# cnorm [make cursor normal] not implemented
# flash [flash] not implemented
# blink [blink] not implemented very usefully in cygwin? \E[5m
# dim [dim] not implemented very usefully in cygwin? \E[2m
# cub1 [cursor back 1] typically \E[D, but ^H is faster?
# kNXT [shifted next key] not implemented
# kPRV [shifted prev key] not implemented
# khome [home key] really is \E[1~ NOT \E[H
# tbc [clear tab stops] not implemented
# xenl [newline ignnored after 80 cols] messes up last line? Ehud Karni
# smpch [Start PC charset] is \E[11m, same as smacs
# rmpch [End PC charset] is \E[10m, same as rmacs
# mir [move in insert mode] fails in tack?
# bce [back color erase] causes problems with change background color?
# cvvis [make cursor very visible] causes a stackdump when testing with
# testcurs using the output option? \E[?25h\E[?8c
# civis [make cursor invisible] causes everything to stackdump? \E[?25l\E[?1c
# ech [erase characters param] broken \E[%p1%dX
# kcbt [back-tab key] not implemented in cygwin? \E[Z
#
# 2005/11/12 -TD
# Remove cbt since it does not work in current cygwin
# Add 'mir' and 'in' flags based on tack
# (sgr removed to fit entry within 1023 bytes)
# (rmacs/smacs removed for consistency)
# (acsc removed to fit entry within 1023 bytes)
cygwin|ansi emulation for Cygwin:\
:am:hs:mi:ms:xo:\
:Co#8:it#8:pa#64:\
:&7=^Z:@7=\E[4~:AB=\E[4%dm:AF=\E[3%dm:AL=\E[%dL:DC=\E[%dP:\
:DL=\E[%dM:DO=\E[%dB:F1=\E[23~:F2=\E[24~:F3=\E[25~:\
:F4=\E[26~:F5=\E[28~:F6=\E[29~:F7=\E[31~:F8=\E[32~:\
:F9=\E[33~:FA=\E[34~:IC=\E[%d@:K2=\E[G:LE=\E[%dD:\
:RI=\E[%dC:S2=\E[11m:S3=\E[10m:UP=\E[%dA:al=\E[L:bl=^G:\
:cb=\E[1K:cd=\E[J:ce=\E[K:ch=\E[%i%dG:cl=\E[H\E[J:\
:cm=\E[%i%d;%dH:cr=^M:cv=\E[%i%dd:dc=\E[P:dl=\E[M:do=\E[B:\
:ei=\E[4l:fs=^G:ho=\E[H:ic=\E[@:im=\E[4h:k1=\E[[A:k2=\E[[B:\
:k3=\E[[C:k4=\E[[D:k5=\E[[E:k6=\E[17~:k7=\E[18~:k8=\E[19~:\
:k9=\E[20~:k;=\E[21~:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:\
:kb=^H:kd=\E[B:kh=\E[1~:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:\
:md=\E[1m:me=\E[0m:mk=\E[8m:mr=\E[7m:nd=\E[C:nw=^M^J:\
:op=\E[39;49m:r1=\Ec\E]R:rc=\E8:sc=\E7:se=\E[27m:sf=^J:\
:so=\E[7m:sr=\EM:ta=^I:te=\E[2J\E[?47l\E8:ti=\E7\E[?47h:\
:ts=\E];:ue=\E[24m:up=\E[A:us=\E[4m:tc=vt102+enq:
# I've supplied this so that you can help test new values and add other
# features. Cheers, earnie_boyd@yahoo.com.
#
# Some features are from pcansi. The op value is from linux. Function-keys
# are from linux. These have been tested not to cause problems. xenl was in
# this list, but DOES cause problems so it has been removed
# (sgr removed to fit entry within 1023 bytes)
# (rmacs/smacs removed for consistency)
# (acsc removed to fit entry within 1023 bytes)
cygwinDBG|Debug Version for Cygwin:\
:am:eo:mi:ms:xo:\
:Co#8:NC#3:co#80:it#8:li#24:pa#64:\
:%c=\E[6$:%e=\E[5$:&7=^Z:@7=\E[4~:AB=\E[4%dm:AF=\E[3%dm:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:F1=\E[23~:\
:F2=\E[24~:F3=\E[25~:F4=\E[26~:F5=\E[28~:F6=\E[29~:\
:F7=\E[31~:F8=\E[32~:F9=\E[33~:FA=\E[34~:IC=\E[%d@:\
:K2=\E[G:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:al=\E[L:bl=^G:\
:bt=\E[Z:cb=\E[1K:cd=\E[J:ce=\E[K:ch=\E[%i%dG:cl=\E[H\E[J:\
:cm=\E[%i%d;%dH:cr=^M:ct=\E[3g:cv=\E[%i%dd:dc=\E[P:\
:dl=\E[M:do=\E[B:ei=\E[4l:ho=\E[H:ic=\E[@:im=\E[4h:\
:k1=\E[[A:k2=\E[[B:k3=\E[[C:k4=\E[[D:k5=\E[[E:k6=\E[17~:\
:k7=\E[18~:k8=\E[19~:k9=\E[20~:k;=\E[21~:kB=\E[Z:kD=\E[3~:\
:kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=^H:kd=\E[B:kh=\E[1~:kl=\E[D:\
:kr=\E[C:ku=\E[A:le=\E[D:mb=\E[5m:md=\E[1m:me=\E[0m:\
:mh=\E[2m:mk=\E[8m:mr=\E[7m:nd=\E[C:nw=^M^J:op=\E[39;49m:\
:r1=\Ec\E]R:rc=\E8:sc=\E7:se=\E[m:sf=^J:so=\E[7m:sr=\EM:\
:st=\EH:ta=^I:ue=\E[m:up=\E[A:us=\E[4m:vb=200\E[?5h\E[?5l:\
:ve=\E[?25h:tc=vt102+enq:
# Key definitions:
# The encodings for unshifted arrow keys, F1-F12, Home, Insert, etc. match the
# encodings used by other x86 environments. All others are invented for DJGPP.
# Oddly enough, while several combinations of modifiers are tabulated, there is
# none for shifted cursor keys.
#
# F1 \E[[A
# F2 \E[[B
# F3 \E[[C
# F4 \E[[D
# F5 \E[[E
# F6 \E[17~
# F7 \E[18~
# F8 \E[19~
# F9 \E[20~
# F10 \E[21~
# F11 \E[23~
# F12 \E[24~
#
# Delete \E[3~
# Down Arrow \E[B
# End \E[4~
# Home \E[1~
# Insert \E[2~
# Left Arrow \E[D
# Page Down \E[6~
# Page Up \E[5~
# Right Arrow \E[C
# Up Arrow \E[A
#
# Shift-F1 \E[25~
# Shift-F2 \E[26~
# Shift-F3 \E[27~
# Shift-F4 \E[28~
# Shift-F5 \E[29~
# Shift-F6 \E[30~
# Shift-F7 \E[31~
# Shift-F8 \E[32~
# Shift-F9 \E[33~
# Shift-F10 \E[34~
# Shift-F11 \E[35~
# Shift-F12 \E[36~
#
# Ctrl-F1 \E[47~
# Ctrl-F2 \E[48~
# Ctrl-F3 \E[49~
# Ctrl-F4 \E[50~
# Ctrl-F5 \E[51~
# Ctrl-F6 \E[52~
# Ctrl-F7 \E[53~
# Ctrl-F8 \E[54~
# Ctrl-F9 \E[55~
# Ctrl-F10 \E[56~
# Ctrl-F11 \E[57~
# Ctrl-F12 \E[58~
#
# Ctrl-Delete \E[43~
# Ctrl-Down Arrow \E[38~
# Ctrl-End \E[44~
# Ctrl-Home \E[41~
# Ctrl-Insert \E[42~
# Ctrl-Left Arrow \E[39~
# Ctrl-Page Down \E[46~
# Ctrl-Page Up \E[45~
# Ctrl-Right Arrow \E[40~
# Ctrl-Up Arrow \E[37~
#
# Alt-F1 \E[59~
# Alt-F2 \E[60~
# Alt-F3 \E[61~
# Alt-F4 \E[62~
# Alt-F5 \E[63~
# Alt-F6 \E[64~
# Alt-F7 \E[65~
# Alt-F8 \E[66~
# Alt-F9 \E[67~
# Alt-F10 \E[68~
# Alt-F11 \E[79~
# Alt-F12 \E[80~
#
# Alt-Delete \E[65~
# Alt-Down Arrow \E[60~
# Alt-End \E[66~
# Alt-Home \E[41~
# Alt-Insert \E[64~
# Alt-Left Arrow \E[61~
# Alt-Page Down \E[68~
# Alt-Page Up \E[67~
# Alt-Right Arrow \E[62~
# Alt-Up Arrow \E[59~
#
# Also:
# Alt-A \E[82~
# Alt-B \E[82~
# Alt-C \E[83~
# Alt-D \E[84~
# Alt-E \E[85~
# Alt-F \E[86~
# Alt-G \E[87~
# Alt-H \E[88~
# Alt-I \E[89~
# Alt-J \E[90~
# Alt-K \E[91~
# Alt-L \E[92~
# Alt-M \E[93~
# Alt-N \E[94~
# Alt-O \E[95~
# Alt-P \E[96~
# Alt-Q \E[97~
# Alt-R \E[98~
# Alt-S \E[99~
# Alt-T \E[100~
# Alt-U \E[101~
# Alt-V \E[102~
# Alt-W \E[103~
# Alt-X \E[104~
# Alt-Y \E[105~
# Alt-Z \E[106~
djgpp|ansi emulation for DJGPP alpha:\
:am:ms:ut:xo:xs:xt:\
:Co#8:it#8:pa#64:\
:@7=\E[4~:AB=\E[4%dm:AF=\E[3%dm:AL=\E[%dL:DC=\E[%dP:\
:DL=\E[%dM:DO=\E[%dB:F1=\E[23~:F2=\E[24~:IC=\E[%d@:\
:LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:\
:ac=+\020,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376:\
:al=\E[L:bl=^G:bt=\E[Z:cb=\E[1K:cd=\E[J:ce=\E[K:\
:ch=\E[%i%dG:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:\
:cv=\E[%i%dd:dc=\E[P:dl=\E[M:do=\E[B:ec=\E[%dX:ei=:ho=\E[H:\
:ic=\E[@:im=:k1=\E[[A:k2=\E[[B:k3=\E[[C:k4=\E[[D:k5=\E[[E:\
:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:k;=\E[21~:\
:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=^H:kd=\E[B:\
:kh=\E[1~:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:\
:me=\E[m:mk=\E[8m:mr=\E[7m:nd=\E[C:nw=^M^J:op=\E[37;40m:\
:se=\E[m:sf=\E[S:so=\E[7m:sr=\E[T:ta=^I:up=\E[A:us=\E[4m:\
:ve=\E[v:vi=\E[1v:vs=\E[2v:
djgpp203|Entry for DJGPP 2.03:\
:am:bs:\
:co#80:it#8:li#25:\
:bl=^G:cr=^M:do=^J:kb=^H:kd=^J:kl=^H:le=^H:nw=^M^J:sf=^J:\
:ta=^I:
djgpp204|Entry for DJGPP 2.04:\
:am:bs:AX:\
:Co#8:NC#3:co#80:it#8:li#25:pa#64:\
:AB=\E[4%dm:AF=\E[3%dm:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:\
:DO=\E[%dB:IC=\E[%d@:LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:\
:SR=\E[%dT:UP=\E[%dA:al=\E[L:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:\
:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:dc=\E[P:dl=\E[M:\
:do=\E[B:ec=\E[%dX:ei=:ho=\E[H:ic=\E[@:im=:k0=\E[21~:\
:k1=\E[[A:k2=\E[[B:k3=\E[[C:k4=\E[[D:k5=\E[[E:k6=\E[17~:\
:k7=\E[18~:k8=\E[19~:k9=\E[20~:k;=\E[21~:kD=\E[3~:\
:kH=\E[4~:kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=^H:kd=\E[B:\
:kh=\E[1~:kl=\E[D:kr=\E[C:ku=\E[A:le=\E[D:mb=\E[5m:\
:md=\E[1m:me=\E[m:mk=\E[8m:mr=\E[7m:nd=\E[C:nw=^M^J:\
:se=\E[m:sf=\E[S:so=\E[7m:sr=\E[T:ta=^I:up=\E[A:us=\E[4m:\
:ve=\E[v:vi=\E[1v:vs=\E[2v:
# This is tested using U/Win's telnet. Scrolling is omitted because it is
# buggy. Another odd bug appears when displaying "~" in alternate character
# set (the emulator spits out error messages). Compare with att6386 -TD
uwin|U/Win 3.2 console:\
:am:eo:in:ms:xn:xo:\
:Co#8:NC#58:it#8:pa#64:\
:@7=\E[Y:AB=\E[4%dm:AF=\E[3%dm:DC=\E[%dP:F1=\EOZ:F2=\EOA:\
:IC=\E[%d@:S2=\E[11m:S3=\E[10m:\
:ac=+\020,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376:\
:ae=\E[10m:as=\E[11m:bl=^G:cb=\E[1K:cd=\E[J:ce=\E[K:\
:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:ct=\E[3g:dc=\E[P:do=^J:\
:ec=\E[%dX:ei=\E[4l:ho=\E[H:ic=\E[@:im=\E[4h:k1=\EOP:\
:k2=\EOQ:k3=\EOR:k4=\EOS:k5=\EOT:k6=\EOU:k7=\EOV:k8=\EOW:\
:k9=\EOX:k;=\EOY:kD=\177:kI=\E[@:kb=^H:kd=\E[B:kh=\E[H:\
:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:\
:me=\E[0;10m:mh=\E[2m:mr=\E[7m:nd=\E[C:nw=^M^J:\
:op=\E[39;49m:r1=\Ec\E]R:rc=\E8:sc=\E7:se=\E[27m:so=\E[7m:\
:st=\EH:ta=^I:u6=\E[%i%d;%dR:u7=\E[6n:ue=\E[m:up=\E[A:\
:us=\E[4m:ve=\E[?25h:vi=\E[?25l:
# This entry fits the Windows NT console when the _POSIX_TERM environment
# variable is set to 'on'. While the Windows NT POSIX console is seldom used,
# the Telnet client supplied with both the Windows for WorkGroup 3.11 TCP/IP
# stack and the Win32 (i.e., Windows 95 and Windows NT 3.1 or later) operating
# systems is not, and (surprise!) they match very well.
#
# See: MS Knowledge Base item Q108581, dated 13-MAY-1997, titled "Setting Up
# VI POSIX Editor for Windows NT 3.1". True to Microsoft form, not only
# are the installation instructions a pile of mind-numbing bureaucratese,
# but the termcap entry is actually broken and unusable as given; the :do:
# capability is misspelled "d".
#
# To use this, you need to a bunch of environment variables:
#
# SET _POSIX_TERM=on
# SET TERM=ansi
# SET TERMCAP=location of termcap file in POSIX file format
# which is case-sensitive.
# e.g. SET TERMCAP=//D/RESKIT35/posix/termcap
# SET TMP=//C/TEMP
#
# Important note: setting the TMP environment variable in POSIX style renders
# it incompatible with a lot of other applications, including Visual C++. So
# you should have a separate command window just for vi. All the other
# variables may be permanently set in the Control Panel\System applet.
#
# You can find out more about the restrictions of this facility at
# <http://www.nentug.org/unix-to-nt/ntposix.htm>.
#
# From: Federico Bianchi <bianchi@magna.cisid.unipi.it>, 15 Jan 1997
ansi-nt|psx_ansi|Microsoft Windows NT console POSIX ANSI mode:\
:am:bw:ms:\
:co#80:it#8:li#25:\
:bl=^G:cd=\E[J:ce=\E[K:cl=\E[2J:cm=\E[%i%d;%dH:cr=^M:do=^J:\
:ho=\E[H:kb=^H:kd=\E[V:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:\
:me=\E[0m:mr=\E[7m:nd=\E[C:nw=\r\E[S:rc=\E[u:sc=\E[s:\
:se=\E[m:sf=\E[S:so=\E[7m:sr=\E[T:ta=^I:up=\E[A:
# From: jew@venus.sunquest.com
# Date: 19 Feb 93 23:41:07 GMT
# Here's a combination of ansi and vt100 termcap
# entries that works nearly perfectly for me
# (Gateway 2000 Handbook and Microsoft Works 3.0):
pcmw|PC running Microsoft Works:\
:am:xn:\
:co#80:it#8:li#24:vt#3:\
:bl=^G:cd=50\E[J:ce=3\E[K:cl=50\E[;H\E[2J:\
:cm=5\E[%i%d;%dH:cr=^M:ct=2\E[3g:do=^J:ho=\E[H:\
:is=\E[1;24r\E[24;1H:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:\
:kb=^H:kd=\EOB:kl=\EOD:kr=\EOC:ku=\EOA:le=^H:mb=2\E[5m:\
:md=2\E[1m:me=2\E[m:mr=2\E[7m:nd=2\E[C:nw=5\r\ED:rc=\E8:\
:rf=/usr/share/tabset/vt100:\
:rs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:sc=\E7:se=2\E[m:\
:sf=5\ED:so=2\E[7m:sr=5\EM:st=2\EH:ta=^I:ue=2\E[m:up=2\E[A:\
:us=2\E[4m:
# From: Federico Bianchi
# This is the entry for the OpenNT terminal.
# The ntconsole name is for backward compatability.
# This is for OpenNT 2.0 and later.
# Later OpenNT was renamed to Interix.
#
# Presently it is distributed by Microsoft as Services For Unix (SFU).
# The 3.5 beta contains ncurses 4.2 (that is header files and executables,
# the documentation dates from 1.9.9e) -TD
# (rmacs/smacs removed for consistency)
# (acsc removed to fit entry within 1023 bytes)
# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
interix|opennt|opennt-25|ntconsole|ntconsole-25|OpenNT-term compatible with color:\
:am:bw:ms:\
:co#80:li#25:\
:AL=\E[%dL:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:\
:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:al=\E[L:bl=^G:bt=\E[Z:\
:cd=\E[J:ce=\E[K:cl=\E[2J:cm=\E[%i%d;%dH:dl=\E[M:do=^J:\
:ho=\E[H:k0=\EFA:k1=\EF1:k2=\EF2:k3=\EF3:k4=\EF4:k5=\EF5:\
:k6=\EF6:k7=\EF7:k8=\EF8:k9=\EF9:kD=\E[M:kH=\E[U:kI=\E[L:\
:kN=\E[T:kP=\E[S:kb=^H:kd=\E[B:kl=\E[D:kr=\E[C:ku=\E[A:\
:le=\E[D:ll=\E[U:md=\E[1m:me=\E[0m:mr=\E[7m:nd=\E[C:\
:nw=^M^J:rc=\E[u:sc=\E[s:se=\E[m:sf=\E[S:so=\E[7m:sr=\E[T:\
:ta=^I:te=\E[2b\E[u\r\E[K:ti=\E[s\E[1b:ue=\E[m:up=\E[A:\
:us=\E[4m:
opennt-35|ntconsole-35|OpenNT-term35 compatible with color:\
:li#35:tc=opennt:
opennt-50|ntconsole-50|OpenNT-term50 compatible with color:\
:li#50:tc=opennt:
opennt-60|ntconsole-60|OpenNT-term60 compatible with color:\
:li#60:tc=opennt:
opennt-100|ntconsole-100|OpenNT-term100 compatible with color:\
:li#100:tc=opennt:
# OpenNT wide terminals
opennt-w|opennt-25-w|ntconsole-w|ntconsole-25-w|OpenNT-term-w compat with color:\
:co#125:tc=opennt:
opennt-35-w|ntconsole-35-w|OpenNT-term35-w compatible with color:\
:li#35:tc=opennt-w:
opennt-50-w|ntconsole-50-w|OpenNT-term50-w compatible with color:\
:li#50:tc=opennt-w:
opennt-60-w|ntconsole-60-w|OpenNT-term60-w compatible with color:\
:li#60:tc=opennt-w:
opennt-w-vt|opennt-25-w-vt|ntconsole-w-vt|ntconsole-25-w-vt|OpenNT-term-w-vt compat with color:\
:co#132:tc=opennt:
# OpenNT terminals with no smcup/rmcup (names match termcap entries)
interix-nti|opennt-nti|opennt-25-nti|ntconsole-25-nti|OpenNT-nti compatible with color:\
:te@:ti@:tc=opennt:
opennt-35-nti|ntconsole-35-nti|OpenNT-term35-nti compatible with color:\
:li#35:tc=opennt-nti:
opennt-50-nti|ntconsole-50-nti|OpenNT-term50-nti compatible with color:\
:li#50:tc=opennt-nti:
opennt-60-nti|ntconsole-60-nti|OpenNT-term60-nti compatible with color:\
:li#60:tc=opennt-nti:
opennt-100-nti|ntconsole-100-nti|OpenNT-term100-nti compatible with color:\
:li#100:tc=opennt-nti:
######## COMMON TERMINAL TYPES
#
# This section describes terminal classes and maker brands that are still
# quite common, but have proprietary command sets not blessed by ANSI.
#
#### Altos
#
# Altos made a moderately successful line of UNIX boxes. In 1990 they were
# bought out by Acer, a major Taiwanese manufacturer of PC-clones.
# Acer has a web site at http://www.acer.com.
#
# Altos descriptions from Ted Mittelstaedt <tedm@agora.rain.com> 4 Sep 1993
# His comments suggest they were shipped with the system.
#
# (altos2: had extension capabilities
# :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
# :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
# :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
# :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
# :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
# :YU=^AQ\r:YD=^AR\r:YR=^AS\r:YL=^AT\r:\
# :HL=^AP\r:SP=\E[i:\
# :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\
# :LO=\E[0q:LC=\E[5q:LL=\E[6q:\
# Comparison with the k* capabilities makes it obvious that the c* things are
# shift keys. I have renamed them to keys 32 and up accordingly. Also,
# :sr: was given as a boolean-- esr)
altos2|alt2|altos-2|altos II:\
:co#80:it#8:li#24:sg#0:ug#0:\
:*5=^Am\r:*8=^An\r:FM=^A`\r:FN=^Aa\r:FO=^Ab\r:FP=^Ac\r:\
:FQ=^Ad\r:FR=^Ae\r:FS=^Af\r:FT=^Ag\r:FU=^Ah\r:FV=^Ai\r:\
:FW=^Aj\r:FX=^Ak\r:RA=\E[?7l:SA=\E[?7h:al=\E[L:cd=\E[J:\
:ce=\E[K:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:dc=\E[P:\
:dl=\E[M:do=\E[1B:ei=:ho=\E[H:ic=\E[@:\
:if=/usr/share/tabset/vt100:im=:\
:is=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:k0=^AI\r:\
:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
:k7=^AF\r:k8=^AG\r:k9=^AH\r:kA=^AJ\r:kB=^AK\r:kC=^AL\r:\
:kD=^AM\r:kE=^AN\r:kF=^AO\r:kb=^H:kd=\E[B:kh=\E[f:kl=\E[D:\
:kr=\E[C:ku=\E[A:le=^H:me=\E[m:nd=\E[1C:nw=^M^J:se=\E[m:\
:sf=^J:so=\E[7m:ta=^I:ue=\E[m:up=\E[1A:us=\E[4m:
# (altos3: had extension capabilities
# :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
# :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
# :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
# :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
# :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
# :HL=^AP\r:SP=\E[i:\
# :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:
altos3|altos5|alt3|alt5|altos-3|altos-5|altos III or V:\
:mb=\E[5p:me=\E[p:sr=\EM:tc=altos2:
altos4|alt4|altos-4|altos IV:\
:tc=wy50:
# (altos7: had extension capabilities:
# :GG#0:GI=\EH8:GF=\EH7:\
# :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
# :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
# :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
# :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
# Comparison with the k* capabilities makes it obvious that the c* things are
# shift keys. I have renamed them to keys 32 and up accordingly. I have
# also made this entry relative to adm12 in order to give it an :sa:. The
# <invis> imported by use=adm+sgr may work, let me know. -- esr)
altos7|alt7|altos VII:\
:am:mi:\
:co#80:li#24:sg#0:\
:*5=^Am\r:*8=^An\r:FM=^A`\r:FN=^Aa\r:FO=^Ab\r:FP=^Ac\r:\
:FQ=^Ad\r:FR=^Ae\r:FS=^Af\r:FT=^Ag\r:FU=^Ah\r:FV=^Ai\r:\
:FW=^Aj\r:FX=^Ak\r:ac=j5k3l2m1n8q\072t4u9v=w0x6:al=\EE:\
:cd=\EY:ce=\ET:cl=\E+^^:cm=\E=%+ %+ :cr=^M:dc=\EW:dl=\ER:\
:do=^J:ei=\Er:ho=^^:im=\Eq:\
:is=\E`\072\Ee(\EO\Ee6\Ec41\E~4\Ec21\Eu\E~2:k0=^AI\r:\
:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
:k7=^AF\r:k8=^AG\r:k9=^AH\r:kA=^AJ\r:kB=^AK\r:kC=^AL\r:\
:kD=^AM\r:kE=^AN\r:kF=^AO\r:kN=\EK:kP=\EJ:kb=^H:kd=^J:kh=^^:\
:kl=^H:kr=^L:ku=^K:le=^H:mb=\EG2:md=\EGt:mh=\EGp:mk=\EG1:\
:nd=^L:nw=^M^J:pf=\EJ:po=\Ed#:sf=^J:sr=\Ej:ta=^I:up=^K:\
:tc=adm+sgr:
altos7pc|alt7pc|altos PC VII:\
:@7=\ET:tc=altos7:
#### Hewlett-Packard (hp)
#
# Hewlett-Packard
# 8000 Foothills Blvd
# Roseville, CA 95747
# Vox: 1-(916)-785-4363 (Technical response line for VDTs)
# 1-(800)-633-3600 (General customer support)
#
#
# As of March 1998, HP no longer has any terminals in production.
# The 700 series (22, 32, 41, 44, 92, 94, 96, 98) is still being
# supported (they still have parts). So are the 2392a and 2394a.
# See the WORKSTATION CONSOLES section for the 700s.
#
# Generic HP terminal - this should (hopefully) work on any HP terminal.
hpgeneric|hp|hewlett-packard generic terminal:\
:am:bs:da:db:mi:pt:xs:\
:co#80:li#24:lm#0:vt#6:\
:al=\EL:bl=^G:cd=\EJ:ce=\EK:ch=\E&a%dC:cl=\EH\EJ:\
:cm=6\E&a%r%dc%dY:cr=^M:ct=\E3:cv=\E&a%dY:dc=\EP:dl=\EM:\
:do=^J:ei=\ER:im=\EQ:kB=\Ei:kb=^H:le=^H:me=\E&d@:nd=\EC:\
:se=\E&d@:sf=^J:so=\E&dJ:st=\E1:ta=^I:ue=\E&d@:up=\EA:\
:us=\E&dD:
hp110|hewlett-packard model 110 portable:\
:li#16:tc=hpgeneric:
hp+pfk+cr|hp function keys with CR:\
:k1=\Ep\r:k2=\Eq\r:k3=\Er\r:k4=\Es\r:k5=\Et\r:k6=\Eu\r:\
:k7=\Ev\r:k8=\Ew\r:
hp+pfk-cr|hp function keys w/o CR:\
:k1=\Ep:k2=\Eq:k3=\Er:k4=\Es:k5=\Et:k6=\Eu:k7=\Ev:k8=\Ew:
# The hp2621s use the same keys for the arrows and function keys,
# but not separate escape sequences. These definitions allow the
# user to use those keys as arrow keys rather than as function
# keys.
hp+pfk+arrows|hp alternate arrow definitions:\
:k1@:k2@:k3@:k4@:k5@:k6@:k7@:k8@:kF=\Er\r:kH=\Eq\r:kR=\Es\r:\
:kd=\Ew\r:kh=\Ep\r:kl=\Eu\r:kr=\Ev\r:ku=\Et\r:
hp+arrows|hp arrow definitions:\
:kF=\ES:kH=\EF:kR=\ET:kd=\EB:kh=\Eh:kl=\ED:kr=\EC:ku=\EA:
# Generic stuff from the HP 262x series
#
hp262x|HP 262x terminals:\
:xs:\
:cd=\EJ:dc=2\EP:ip=2:kA=\EL:kD=\EP:kE=\EK:kF=\ES:kI=\EQ:\
:kL=\EM:kM=\ER:kN=\EU:kP=\EV:kR=\ET:kS=\EJ:kd=\EB:ke=\E&s0A:\
:kh=\Eh:kl=\ED:kr=\EC:ks=\E&s1A:ku=\EA:mb=\E&dA:me=\E&d@:\
:mk=\E&dS:mr=\E&dB:se=\E&d@:sf=\ES:so=\E&dB:ta=2\011:\
:ue=\E&d@:us=\E&dD:
# Note: no :ho: on HPs since that homes to top of memory, not screen.
# Due to severe 2621 braindamage, the only way to get the arrow keys to
# transmit anything at all is to turn on the function key labels
# with :ks:, and even then the user has to hold down shift!
# The default 2621 turns off the labels except when it has to to
# enable the function keys. If your installation prefers labels
# on all the time, or off all the time (at the "expense" of the
# function keys), use 2621-nl or 2621-wl.
#
# Note: there are newer ROMs for 2621's that allow you to set
# strap A so the regular arrow keys xmit \EA, etc, as with the
# 2645. However, even with this strap set, the terminal stops
# xmitting if you reset it, until you unset and reset the strap!
# Since there is no way to set/unset the strap with an escape
# sequence, we don't use it in the default.
# If you like, you can use 2621-ba (brain-damaged arrow keys).
hp2621-ba|2621 w/new rom and strap A set:\
:ke@:ks@:tc=hp+arrows:tc=hp2621:
# hp2621 with function labels. Most of the time they are off,
# but inside vi, the function key labels appear. You have to
# hold down shift to get them to xmit.
hp2621|hp2621a|hp2621A|2621|2621a|2621A|hp2621-wl|2621-wl|hp 2621 w/labels:\
:is=\E&jA\r:ke=\E&jA:tc=hp2621-fl:
hp2621-fl|hp 2621:\
:xo:xs@:\
:pb#19200:\
:bt=\Ei:cm=\E&a%r%dc%dY:dc=2\EP:ip=2:is=\E&j@\r:ke=\E&j@:\
:ks=\E&jB:me=\E&d@:se=\E&d@:so=\E&dD:ta=2\011:ue=\E&d@:\
:us=\E&dD:tc=hp+pfk+cr:tc=hpgeneric:
# To use hp2621p printer, setenv TERM=2621p, PRINTER=2612p
hp2621p|hp 2621 with printer:\
:pf=\E&p13C:po=\E&p11C:tc=hp2621:
hp2621p-a|hp2621p with fn as arrows:\
:tc=hp+pfk+arrows:tc=hp2621p:
# hp2621 with k45 keyboard
hp2621-k45|hp2621k45|k45|hp 2621 with 45 keyboard:\
:kb=^H:kd=\EB:ke=\E&s0A:kh=\Eh:kl=\ED:kr=\EC:ks=\E&s1A:\
:ku=\EA:tc=hp2621:
# 2621 using all 48 lines of memory, only 24 visible at any time.
hp2621-48|48 line 2621:\
:li#48:\
:cm=\E&a%r%dc%dR:cv=\E&a%dR:ho=\EH:tc=hp2621:
# 2621 with no labels ever. Also prevents vi delays on escape.
hp2621-nl|hp 2621 with no labels:\
:kd@:ke@:kh@:kl@:kr@:ks@:ku@:tc=hp2621-fl:
# Needed for UCB ARPAVAX console, since lsi-11 expands tabs
# (wrong).
#
hp2621-nt|hp 2621 w/no tabs:\
:ta@:tc=hp2621:
# Hp 2624 B with 4 or 10 pages of memory.
#
# Some assumptions are made with this entry. These settings are
# NOT set up by the initialization strings.
#
# Port Configuration
# RecvPace=Xon/Xoff
# XmitPace=Xon/Xoff
# StripNulDel=Yes
#
# Terminal Configuration
# InhHndShk=Yes
# InhDC2=Yes
# XmitFnctn(A)=No
# InhEolWrp=No
#
# Note: the 2624 DOES have a true :ho:, believe it or not!
#
# The 2624 has an "error line" to which messages can be sent.
# This is CLOSE to what is expected for a "status line". However,
# after a message is sent to the "error line", the next carriage
# return is EATEN and the "error line" is turned back off again!
# So I guess we can't define :hs:, :es:, :ws:, :ds:, :fs:, :ts:.
#
# This entry supports emacs (and any other program that uses raw
# mode) at 4800 baud and less. I couldn't get the padding right
# for 9600.
#
# (hp2624: replaced NUL sequences in flash with mandatory pauses -- esr)
hp2624|hp2624a|hp2624b|hp2624b-4p|Hewlett Packard 2624 B:\
:da:db:\
:lm#96:\
:vb=\E&w13F\E&w12F\E&w13F\E&w12F:tc=hp+labels:tc=scrhp:
# This hp2626 entry does not use any of the fancy windowing stuff
# of the 2626.
#
# Indeed, terminfo does not yet handle such stuff. Since changing
# any window clears memory, it is probably not possible to use
# this for screen opt.
#
# ed is incredibly slow most of the time - I am guessing at the
# exact padding. Since the terminal uses xoff/xon this is intended
# only for cost computation, so that the terminal will prefer el
# or even dl1 which is probably faster!
#
# \ED\EJ\EC hack for ed from Ed Bradford - apparently ed is only
# extra slow on the last line of the window.
#
# The padding probably should be changed.
#
hp2626|hp2626a|hp2626p|hp 2626:\
:da:db:\
:lm#0:pb#19200:\
:SF=\E&r%dD:SR=\E&r%dU:cd=\ED\EJ\EC:ip=4:is=\E&j@\r:\
:tc=hp+pfk+cr:tc=hp+labels:tc=scrhp:
# This entry is for sysline. It allocates a 23 line window with
# a 115 line workspace for regular use, and a 1 line window for
# the status line.
#
# This assumes port 2 is being used.
# Turn off horizontal line, Create ws #1 with 115 lines,
# Create ws #2 with 1 line, Create window #1 lines 1-23,
# Create window #2 lines 24-24, Attach cursor to workspace #1.
# Note that this clears the tabs so it must be done by tset before
# it sets the tabs.
#
hp2626-s|hp 2626 using only 23 lines:\
:es:hs:\
:li#23:\
:fs=\E&d@\E&w7f2p1I\E&w4f1I:\
:i1=\E&q3t0{0H \E&w0f115n1I \E&w0f1n2I \E&w2f1i0d0u22l0S \E&w2f2i0d23u23l0S \E&w7f2p1I \r:\
:ts=\E&w7f2p2I\E&w4f2I\r\EK\E&a%dC:tc=hp2626:
# Force terminal back to 24 lines after being 23.
hp2626-ns|hp 2626 using all 24 lines:\
:i1=\E&q3t0{0H \E&w0f118n1I \E&w0f1n2I \E&w2f1i0d0u23l0S \E&w3f2I \E&w7f2p1I \r:\
:tc=hp2626:
# Various entries useful for small windows on 2626.
hp2626-12|hewlett-packard 2626 12 lines:\
:li#12:tc=hp2626:
hp2626-12x40|hewlett-packard 2626 12 lines 40 columns:\
:co#40:li#12:tc=hp2626:
hp2626-x40|hewlett-packard 2626 40 columns:\
:co#40:tc=hp2626:
hp2626-12-s|hewlett-packard 2626 11 lines plus status:\
:li#11:tc=hp2626-s:
#
# hp2627 color tubes from University of Wisconsin
#
hp2627a-rev|hp 2627 with reverse video colors:\
:cr=^M:do=^J:\
:is=\E&v0m1a0b0c1x1y1z1i0a0b1c1x1y1z0i0S\E&j@\r\E3\r:\
:kb=^H:kd=^J:kl=^H:nw=^M^J:sf=^J:ta=^I:ue=\E&v0S\E&d@:\
:us=\E&dD\E&v1S:tc=hp2621-nl:
hp2627a|hp 2627 color terminal with no labels:\
:cr=^M:do=^J:\
:is=\E&v0m1a1b0c1i0a1b1c2i1a0b0c0i0S\E&j@\r\E3\r:\
:kb=^H:kd=^J:kl=^H:nw=^M^J:se=\E&v0S:sf=^J:so=\E&v2S:ta=^I:\
:ue=\E&v0S\E&d@:us=\E&dD\E&v1S:tc=hp2621-nl:
hp2627c|hp 2627 color (cyan) terminal with no labels:\
:cr=^M:do=^J:\
:is=\E&v0m1a0b0c2i1a1b0c1i0a1b1c0i0S\E&j@\r\E3\r:\
:kb=^H:kd=^J:kl=^H:nw=^M^J:sf=^J:ta=^I:tc=hp2627a:
# hp2640a doesn't have the Y cursor addressing feature, and C is
# memory relative instead of screen relative, as we need.
#
hp2640a|hp 2640a:\
:cm@:ke@:ks@:tc=hp2645:
hp2640b|hp2644a|hp 264x series:\
:ke@:ks@:tc=hp2645:
# (hp2641a: removed unknown :gu: -- esr)
hp2641a|hp2645a|hp2647a|HP 264?A series BRL entry:\
:am:da:db:mi:xs:\
:co#80:li#24:\
:al=\EL:bl=^G:cd=\EJ:ce=\EK:ch=\E&a%2C:cl=\EH\EJ:\
:cm=\E&a%r%2c%2Y:cr=^M:cv=\E&a%2Y:dc=\EP:dl=\EM:do=^J:\
:ei=\ER:if=/usr/share/tabset/std:im=\EQ:is=500\EE:kb=^H:\
:kd=^J:kl=^H:le=^H:nd=\EC:nw=^M^J:se=\E&d@:sf=^J:so=\E&dB:\
:ta=^I:up=\EA:
# This terminal should be used at 4800 baud or less. It needs padding for
# plain characters at 9600, I guessed at an appropriate cr delay. It really
# wants ^E/^F handshaking, but that doesn't work well even if you write
# software to support it.
hp2645|hp45|HP 2645 series:\
:pb#9600:\
:cr=20\r:kA=\EL:kD=\EP:kE=\EK:kF=\ES:kI=\EQ:kL=\EM:kM=\ER:\
:kN=\EU:kP=\EV:kR=\ET:kS=\EJ:kT=\E1:kd=\EB:ke=\E&s0A:kh=\Eh:\
:kl=\ED:kr=\EC:ks=\E&s1A:kt=\E2:ku=\EA:mb=\E&dA:me=\E&d@:\
:mh=\E&dH:mr=\E&dB:us=\E&dD:tc=hpgeneric:
# You should use this terminal at 4800 baud or less.
hp2648|hp2648a|HP 2648a graphics terminal:\
:cl=50\EH\EJ:cm=20\E&a%r%dc%dY:dc=7\EP:ip=5:tc=hp2645:
# The HP 150 terminal is a fairly vanilla HP terminal, with the
# clreol standout problem. It also has graphics capabilities and
# a touch screen, which we don't describe here.
hp150|hewlett packard Model 150:\
:bs:tc=hp2622:
# HP 2382a terminals, "the little ones." They don't have any
# alternate character set support and sending out ^N/^O will
# leave the screen blank.
hp2382a|hp2382|hewlett packard 2382a:\
:da:db:\
:lh#1:lm#48:\
:ac@:ae@:as@:me=\E&d@:tc=hp+labels:tc=scrhp:
hp2621-a|hp2621a-a|hp2621 with fn as arrows:\
:tc=hp+pfk+arrows:tc=hp2621-fl:
# newer hewlett packard terminals
newhpkeyboard|generic entry for HP extended keyboard:\
:kA=\EL:kB=\Ei:kC=\EJ:kD=\EP:kE=\EK:kF=\ET:kH=\EF:kI=\EQ:\
:kL=\EM:kM=\ER:kN=\EU:kP=\EV:kR=\ES:kS=\EJ:kb=^H:kd=\EB:\
:ke=\E&s0A:kh=\Eh:kl=\ED:kr=\EC:ks=\E&s1A:ku=\EA:\
:tc=hp+pfk-cr:
newhp|generic entry for new hewlett packard terminals:\
:am:bw:mi:xo:xs:\
:co#80:li#24:pb#4800:\
:ac=2[3@4>5I9(\072'JSKWLQMAO#P$Q;R!S"T1U2V4W3X\072Y+Z*dHjGkTlRmFn/q,t5u6v8w7x.:\
:ae=^O:al=\EL:as=^N:bl=^G:bt=\Ei:cd=\EJ:ce=\EK:cr=^M:ct=\E3:\
:dc=2\EP:dl=\EM:do=^J:ei=\ER:i1=8\E&jB:im=\EQ:ip=2:le=^H:\
:mb=\E&dA:md=\E&dF:me=\E&d@:mh=\E&dH:mk=\E&dS:mr=\E&dB:\
:nd=\EC:nw=^M^J:r1=\Eg:se=\E&d@:sf=^J:so=\E&dJ:sr=\ET:\
:st=\E1:ta=2\011:ue=\E&d@:up=\EA:us=\E&dD:\
:tc=newhpkeyboard:
memhp|memory relative addressing for new HP ttys:\
:vt#6:\
:CM=\E&a%dr%dC:DO=\E&a+%dR:LE=\E&a-%dC:RI=\E&a+%dC:\
:UP=\E&a-%dR:ch=\E&a%dC:cl=40\EH\EJ:cm=\E&a%dr%dC:\
:cv=\E&a%dR:ho=\EH:ll=\E&a23R\r:tc=newhp:
scrhp|screen relative addressing for new HP ttys:\
:CM=\E&a%dr%dC:DO=\E&a+%dR:LE=\E&a-%dC:RI=\E&a+%dC:\
:UP=\E&a-%dR:ch=\E&a%dC:cl=40\E&a0c0Y\EJ:\
:cm=10\E&a%dy%dC:cv=\E&a%dY:ho=\E&a0y0C:ll=\E&a0y0C\EA:\
:tc=newhp:
# (hp+labels: added label values from a BRL termcap -- esr)
hp+labels|"standard" label info for new HP ttys:\
:Nl#8:lh#2:lw#8:\
:LF=\E&j@:LO=\E&jB:l0=f1:l1=f2:l2=f3:l3=f4:l4=f5:l5=f6:l6=f7:\
:l7=f8:
hp+printer|"standard" printer info for HP ttys:\
:ff=\E&p4u0C:pf=\E&p13C:po=\E&p11C:ps=\EH\E&p4dF:
# The new hp2621b is kind of a cross between the old 2621 and the
# new 262x series of machines. It has dip-switched options.
# The firmware has a bug in it such that if you give it a null
# length label, the following character is eaten!
hp2621b|hp 2621b with old style keyboard:\
:Nl#8:lh#1:lm#48:lw#8:\
:LO=\E&jB:kF=\ET:kH=\EF:kR=\ES:kd=\EB:kh=\Eh:kl=\ED:kr=\EC:\
:ku=\EA:tc=hp2621:
hp2621b-p|hp 2621b with printer:\
:tc=hp+printer:tc=hp2621b:
# hp2621b - new 2621b with new extended keyboard
# these are closer to the new 26xx series than the other 2621b
hp2621b-kx|hp 2621b with extended keyboard:\
:tc=newhpkeyboard:tc=hp2621b:
hp2621b-kx-p|hp 2621b with new keyboard & printer:\
:tc=hp+printer:tc=hp2621b-kx:
# Some assumptions are made in the following entries.
# These settings are NOT set up by the initialization strings.
#
# Port Configuration
# RecvPace=Xon/Xoff XmitPace=Xon/Xoff StripNulDel=Yes
#
# Terminal Configuration
# InhHndShk(G)=Yes InhDC2(H)=Yes
# XmitFnctn(A)=No InhEolWrp=No
#
#
# Hp 2622a & hp2623a display and graphics terminals
#
hp2622|hp2622a|hp 2622:\
:da:db:\
:lm#0:pb#19200:\
:is=\E&dj@\r:tc=hp+pfk+cr:tc=hp+labels:tc=scrhp:
# The 2623 is a 2622 with extra graphics hardware.
hp2623|hp2623a|hp 2623:\
:tc=hp2622:
hp2624b-p|hp2624b-4p-p|hewlett packard 2624 B with printer:\
:tc=hp+printer:tc=hp2624:
# The hewlett packard B can have an optional extra 6 pages of memory.
hp2624-10p|hp2624a-10p|hp2624b-10p|hewlett packard 2624 B w/ 10 pages of memory:\
:lm#240:tc=hp2624:
hp2624b-10p-p|hewlett packard 2624 B w/ extra memory & printer:\
:lm#240:tc=hp2624b-p:
# Color manipulations for HP terminals
hp+color|hp with colors:\
:cc:\
:Co#16:NC#17:pa#7:\
:oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5I\E&v1b1c6I\E&v1x1y7I:\
:op=\E&v0S:sp=\E&v%dS:
# :is: sets the screen to be 80 columns wide
hp2397a|hp2397|hewlett packard 2397A color terminal:\
:is=\E&w6f80X:tc=memhp:tc=hp+labels:tc=hp+color:
# HP 700/44 Setup parameters:
# Terminal Mode HP-PCterm
# Inhibit Auto Wrap NO
# Status Line Host Writable
# PC Character Set YES
# Twenty-Five Line Mode YES
# XON/XOFF @128 or 64 (sc)
# Keycode Mode NO or YES (sc)
# Backspace Key BS or BS/DEL
#
# :is: sets pcterm; autowrap; 25 lines; pc char set; prog DEL key;
# \E\\? does not turn off keycode mode
# <smsc> sets alternate start/stop; keycode on
hpansi|hp700|hewlett packard 700/44 in HP-PCterm mode:\
:am:eo:xn:xo:\
:co#80:li#25:\
:@7=\E[4~:RA=\E[?7l:S4=250\E[>11h\EPO**x0/65;1/67\E\\:\
:S5=\E[>11l\EP1**x0/11;1/13\E[m\E\\:SA=\E[?7h:XF=g:XN=e:\
:ac=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263:\
:al=\E[L:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:cl=\E[2J\E[H:\
:cm=\E[%i%d;%dH:cr=^M:dc=\E[P:dl=\E[M:do=\E[B:ei=:ho=\E[H:\
:ic=\E[@:im=:\
:is=\E[44"p\E[?7h\E[>10h\E[>12h\EP1;1|3/7F\E\\:\
:k1=\E[17~:k2=\E[18~:k3=\E[19~:k4=\E[20~:k5=\E[21~:\
:k6=\E[23~:k7=\E[24~:k8=\E[25~:k9=\E[26~:k;=\E[28~:\
:kB=\E[Z:kN=\E[6~:kP=\E[5~:kb=^H:kd=\E[B:kh=\E[1~:kl=\E[D:\
:kr=\E[C:ku=\E[A:le=\E[D:me=\E[m:nd=\E[C:se=\E[m:sf=^J:\
:so=\E[7m:ta=^I:ue=\E[m:up=\E[A:us=\E[4m:ve=\E[?25h:\
:vi=\E[?25l:
#
# (hp2392: copied :ei: here from hpex -- esr)
hp2392|239x series:\
:co#80:\
:bt=\Ei:cm=\E&a%dy%dC:cv=\E&a%dY:ei=\ER:im=\EQ:k1=\Ep\r:\
:k2=\Eq\r:k3=\Er\r:k4=\Es\r:k5=\Et\r:k6=\Eu\r:k7=\Ev\r:\
:k8=\Ew\r:kF=\EU:kN=\Eu:kP=\Ev:kR=\EV:kh=\Eh:ue=\E&d@:\
:us=\E&dD:tc=hpsub:
hpsub|hp terminals -- capability subset:\
:am:da:db:mi:xo:xs:\
:li#24:\
:al=\EL:bl=^G:cd=\EJ:ce=\EK:ch=\E&a%dC:cl=\EH\EJ:cr=^M:\
:dc=\EP:dl=\EM:do=\EB:if=/usr/share/tabset/stdcrt:\
:is=\E&s1A\E<\E&k0\\:kb=^H:kd=\EB:ke=\E&s0A:kh=\Eh:kl=\ED:\
:kr=\EC:ks=\E&s1A:ku=\EA:le=^H:me=\E&d@:nd=\EC:se=\E&d@:\
:sf=^J:so=\E&dB:ta=^I:up=\EA:
# hpex:
# May be used for most 24 x 80 hp terminals,
# but has no padding added, so may allow runover in some terminals at high
# baud rates. Will not work for hp2640a or hp2640b terminals, hp98x6 and
# hp98x5 terminal emulators or hp98x6 consoles.
# Adds xy-cursor addressing, vertical cursor addressing, home,
# last line, and underline capabilities.
#
# (hpex: removed memory-lock capabilities ":ml=\El:mu=\Em:",
# moved :ei: here from hpsub -- esr)
hpex|hp extended capabilites:\
:cm=\E&a%dy%dC:cr=^M:cv=\E&a%dY:do=^J:ei=\ER:im=\EQ:kb=^H:\
:kd=^J:kl=^H:nw=^M^J:sf=^J:ta=^I:ue=\E&d@:us=\E&dD:tc=hpsub:
# From: Ville Sulko <Ville.Sulko@bip.atk.tpo.fi>, 05 Aug 1996
hp2|hpex2|hewlett-packard extended capabilities newer version:\
:am:da:db:mi:xs:\
:Nl#8:co#80:lh#2:li#24:lm#0:lw#8:sg#0:ug#0:\
:LF=\E&j@:LO=\E&jB:al=\EL:bl=^G:cd=\EJ:ce=\EK:ch=\E&a%dC:\
:cl=\E&a0y0C\EJ:cm=\E&a%dy%dC:cr=^M:ct=\E3:cv=\E&a%dY:\
:dc=\EP:dl=\EM:do=\EB:ei=\ER:im=\EQ:k1=\Ep:k2=\Eq:k3=\Er:\
:k4=\Es:k5=\Et:k6=\Eu:k7=\Ev:k8=\Ew:kA=\EL:kC=\EJ:kD=\EP:\
:kE=\EK:kF=\ES:kH=\EF:kI=\EQ:kL=\EM:kM=\ER:kN=\EU:kP=\EV:\
:kR=\ET:kS=\EJ:kT=\E1:ka=\E3:kb=^H:kd=\EB:ke=\E&s0A:kh=\Eh:\
:kl=\ED:kr=\EC:ks=\E&s1A:kt=\E2:ku=\EA:le=^H:me=\E&d@\017:\
:ml=\El:mu=\Em:nd=\EC:se=\E&d@:sf=^J:so=\E&dB:st=\E1:ta=^I:\
:ue=\E&d@:up=\EA:us=\E&dD:
# HP 236 console
# From: <ddavis@ic.berkeley.edu>
hp236|hp236 internal terminal emulator:\
:am:bs:\
:co#80:li#24:\
:al=\EG:ce=\EK:cl=\EF:cm=\EE%+ %+ :dc=\EJ:dl=\EH:ei=:ic=\EI:\
:im=:le=^H:me=\ECI:se=\ECI:so=\EBI:up=^K:ve=\EDE:vs=\EDB:
# This works on a hp300 console running Utah 4.3 BSD
# From: Craig Leres <leres@okeeffe.berkeley.edu>
hp300h|HP Catseye console:\
:am:bs:da:db:mi:xs:\
:co#128:li#51:lm#0:sg#0:ug#0:\
:al=\EL:bl=^G:bt=\Ei:cd=\EJ:ce=\EK:ch=\E&a%dC:\
:cl=\E&a0y0C\EJ:cm=\E&a%dy%dC:cr=^M:ct=\E3:cv=\E&a%dY:\
:dc=\EP:dl=\EM:do=\EB:ei=\ER:if=/usr/share/tabset/stdcrt:\
:im=\EQ:kb=^H:kd=\EB:ke=\E&s0A:kh=\Eh:kl=\ED:kr=\EC:\
:ks=\E&s1A:ku=\EA:le=^H:me=\E&d@:nd=\EC:se=\E&d@:sf=^J:\
:so=\E&dB:ta=^I:ue=\E&d@:up=\EA:us=\E&dD:
# From: Greg Couch <gregc@ernie.berkeley.edu>
hp9837|hp98720|hp98721|HP 9000/300 workstations:\
:am:bs:da:db:mi:xs:\
:co#128:it#8:li#46:lm#0:\
:al=\EL:bl=^G:bt=\Ei:cd=\EJ:ce=\EK:ch=\E&a%dC:\
:cl=\E&a0y0C\EJ:cm=\E&a%dy%dC:ct=\E3:cv=\E&a%dY:dc=\EP:\
:dl=\EM:do=\EB:ei=\ER:im=\EQ:is=\E&v0m1b0i&j@:kA=\EL:\
:kD=\EP:kE=\EK:kI=\EQ:kL=\EM:kN=\EU:kP=\EV:kS=\EJ:kb=^H:\
:kd=\EB:ke=\E&s0A:kh=\Eh:kl=\ED:kr=\EC:ks=\E&s1A:ku=\EA:\
:le=^H:me=\E&d@:nd=\EC:se=\E&v0S:sf=^J:so=\E&v5S:st=\E1:\
:ta=^I:ue=\E&d@:up=\EA:us=\E&dD:
# HP 9845 desktop computer from BRL
# (hp9845: removed unknown capability :gu: -- esr)
hp9845|HP 9845:\
:am:bs:da:db:eo:mi:xs:\
:co#80:li#21:\
:al=\EL:bc=\ED:cd=\EJ:ce=\EK:cl=\EH\EJ:cm=\E&a%r%2c%2Y:\
:dc=\EP:dl=\EM:do=\EB:ei=\ER:if=/usr/share/tabset/std:\
:im=\EQ:le=\ED:nd=\EC:se=\E&d@:so=\E&dB:up=\EA:
# From: Charles A. Finnell of MITRE <finnell@mitre.org>, developed 07SEP90
# (hp98550: replaced /usr/share/tabset/9837 with std because :it#8:,:st=\E1:;
# added empty <acsc> to avoid warnings re :as:/:ae: --esr)
hp98550|hp98550a|HP 9000 Series 300 color console:\
:am:bs:da:db:mi:xs:\
:co#128:it#8:li#49:lm#0:\
:ac=:ae=^O:al=\EL:as=^N:bl=^G:bt=\Ei:cd=\EJ:ce=\EK:\
:ch=\E&a%dC:cl=\EH\EJ:cm=\E&a%dy%dC:cr=^M:ct=\E3:\
:cv=\E&a%dY:dc=\EP:dl=\EM:do=^J:ei=\ER:\
:if=/usr/share/tabset/std:im=\EQ:k1=\Ep:k2=\Eq:k3=\Er:\
:k4=\Es:k5=\Et:k6=\Eu:k7=\Ev:k8=\Ew:kA=\EL:kC=\EJ:kD=\EP:\
:kE=\EK:kF=\ES:kH=\EF:kI=\EQ:kL=\EM:kM=\ER:kN=\EU:kP=\EV:\
:kR=\ET:kS=\EJ:kT=\E1:ka=\E3:kb=^H:kd=\EB:ke=\E&s0A:kh=\Eh:\
:kl=\ED:kr=\EC:ks=\E&s1A:kt=\E2:ku=\EA:le=^H:mb=\E&dA:\
:md=\E&dJ:me=\E&d@:mh=\E&dH:mk=\E&ds:mr=\E&dJ:nd=\EC:\
:se=\E&d@:sf=^J:so=\E&dJ:st=\E1:ta=^I:ue=\E&d@:up=\EA:\
:us=\E&dD:ve=\E*dQ:vi=\E*dR:
# From: Victor Duchovni <vic@fine.princeton.edu>
# (hp700-wy: removed obsolete ":nl=^J:";
# replaced /usr/share/tabset/hp700-wy with std because :it#8:,:st=\E1: -- esr)
hp700-wy|HP700/41 emulating wyse30:\
:am:bs:bw:mi:ms:\
:co#80:it#8:li#24:sg#1:ug#1:\
:al=0.7*\EE:bt=\EI:cd=\EY:ce=10\ET:cl=^Z:cm=\E=%+ %+ :\
:cr=^M:ct=\E0:cv=\E[%+ :dc=\EW:dl=\ER:do=^V:ei=\Er:ho=^^:\
:i1=\E~"\EC\Er\E(\EG0\003\E`9\E`1:\
:if=/usr/share/tabset/stdcrt:im=\Eq:kB=\EI:kC=^Z:kE=\ET:\
:kI=\Eq:kM=\Er:kS=\EY:kT=\EI:kb=\177:kd=^V:kh=^^:kl=^H:kr=^L:\
:ku=^K:le=^H:ll=^^^K:me=10\EG0:nd=^L:se=10\EG0:so=10\EG4:\
:sr=\Ej:st=\E1:ta=^I:ue=10\EG0:up=^K:us=10\EG8:
hp70092|hp70092a|hp70092A|HP 700/92:\
:am:da:db:xs:\
:Nl#8:co#80:lh#2:li#24:lm#0:lw#8:\
:LF=\E&j@:LO=\E&jB:ac=0cjgktlrmfn/q,t5u6v8w7x.:ae=^O:\
:al=\EL:as=^N:bl=^G:bt=\Ei:ce=\EK:ch=\E&a%dC:\
:cl=\E&a0y0C\EJ:cm=\E&a%dy%dC:cr=^M:ct=\E3:cv=\E&a%dY:\
:dc=\EP:dl=\EM:do=\EB:ei=\ER:im=\EQ:k1=\Ep:k2=\Eq:k3=\Er:\
:k4=\Es:k5=\Et:k6=\Eu:k7=\Ev:k8=\Ew:kA=\EL:kC=\EJ:kD=\EP:\
:kE=\EK:kF=\ES:kH=\EF:kI=\EQ:kL=\EM:kM=\ER:kN=\EU:kP=\EV:\
:kR=\ET:kS=\EJ:kT=\E1:ka=\E3:kb=^H:kd=\EB:ke=\E&s0A:kh=\Eh:\
:kl=\ED:kr=\EC:ks=\E&s1A:kt=\E2:ku=\EA:le=^H:mb=\E&dA:\
:md=\E&dB:me=\E&d@:mh=\E&dH:mr=\E&dB:nd=\EC:se=\E&d@:\
:so=\E&dJ:sr=\ET:st=\E1:ta=^I:ue=\E&d@:up=\EA:us=\E&dD:
bobcat|sbobcat|HP 9000 model 300 console:\
:am:da:db:mi:xs:\
:co#128:it#8:li#47:sg#0:ug#0:\
:al=10*\EL:bt=\Ei:cd=\EJ:ce=\EK:ch=6\E&a%dC:cl=\EH\EJ:\
:cm=6\E&a%dy%dC:cr=^M:cv=6\E&a%dY:dc=\EP:dl=10*\EM:do=\EB:\
:ei=\ER:im=\EQ:kb=^H:kd=\EB:ke=\E&s0A:kh=\Eh:kl=\ED:kr=\EC:\
:ks=\E&s1A:ku=\EA:le=^H:me=\E&d@:nd=\EC:nw=^M^J:se=\E&d@:\
:sf=^J:so=\E&dB:ta=^I:ue=\E&d@:up=\EA:us=\E&dD:
gator-t|HP 9000 model 237 emulating extra-tall AAA:\
:li#94:tc=gator:
gator|HP 9000 model 237 emulating AAA:\
:bw:km:mi:ul:\
:co#128:it#8:li#47:\
:AL=1*\E[%dL:DC=4\E[%dP:DL=1*\E[%dM:IC=4\E[%d@:al=\E[L:\
:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:ch=\E[%i%d`:cl=\E[H\E[J:\
:cm=\E[%i%d;%dH:cr=^M:dc=\E[P:dl=\E[M:do=^J:ei=:ho=\E[H:\
:ic=\E[@:im=:kb=^H:kd=^J:kl=^H:le=^H:me=\E[m:mr=\E[7m:\
:nd=\E[C:nw=^M^J:rp=1*%.\E[%db:se=\E[m:so=\E[7m:ta=^I:\
:ue=\E[m:up=\EM:us=\E[4m:
gator-52|HP 9000 model 237 emulating VT52:\
:co#128:li#47:tc=vt52:
gator-52t|HP 9000 model 237 emulating extra-tall VT52:\
:li#94:tc=gator-52:
#### Honeywell-Bull
#
# From: Michael Haardt <michael@gandalf.moria> 11 Jan 93
#
# Honeywell Bull terminal. Its cursor and function keys send single
# control characters and it has standout/underline glitch. Most programs
# do not like these features/bugs. Visual bell is realized by flashing the
# "keyboard locked" LED.
dku7003-dumb|Honeywell Bull DKU 7003 dumb mode:\
:co#80:li#25:\
:cd=^_:ce=\E[K:cl=^]^_:cm=\E[%i%d;%dH:cr=^M:do=^K:ho=^]:\
:kb=^H:kd=^K:kh=^]:kl=^Y:kr=^X:ku=^Z:le=^Y:nd=^X:nw=^M^J:\
:sf=^J:ta=^I:up=^Z:vb=\E[2h\E[2l:
dku7003|Honeywell Bull DKU 7003 all features described:\
:ms:\
:sg#1:ug#1:\
:mb=\E[5m:md=\E[7m:me=\E[m:mh=\E[2m:mr=\E[7m:se=\E[m:\
:so=\E[7m:ue=\E[m:us=\E[4m:tc=dku7003-dumb:
#### Lear-Siegler (adm)
#
# These guys are long since out of the terminals business, but
# in 1995 many current terminals still have an adm type as one of their
# emulations (usually their stupidest, and usually labeled adm3, though
# these `adm3' emulations normally have adm3a+ capabilities).
#
# WARNING: Some early ADM terminals (including the ADM3 and ADM5) had a
# `diagnostic feature' that sending them a ^G while pin 22 (`Ring Indicator')
# was being held to ground would trigger a send of the top line on the screen.
# A quick fix might be to drop back to a cheesy 4-wire cable with pin 22
# hanging in the air. (Thanks to Eric Fischer, <eric@fudge.uchicago.edu>,
# for clearing up this point.)
adm1a|adm1|lsi adm1a:\
:am:\
:co#80:li#24:\
:bl=^G:cl=1\E;:cm=\E=%+ %+ :cr=^M:do=^J:ho=^^:le=^H:nd=^L:\
:sf=^J:up=^K:
adm2|lsi adm2:\
:am:bs:\
:co#80:li#24:\
:al=\EE:bl=^G:cd=\EY:ce=\ET:cl=\E;:cm=\E=%+ %+ :cr=^M:\
:dc=\EW:dl=\ER:do=^J:ei=:ho=^^:ic=\EQ:im=:kd=^J:kh=^^:kl=^H:\
:kr=^L:ku=^K:le=^H:nd=^L:sf=^J:up=^K:
# (adm3: removed obsolete ":ma=^K^P:" -- esr)
adm3|lsi adm3:\
:am:bs:\
:co#80:li#24:\
:bl=^G:cl=^Z:cr=^M:do=^J:le=^H:sf=^J:
# The following ADM-3A switch settings are assumed for normal operation:
# SPACE U/L_DISP CLR_SCRN 24_LINE
# CUR_CTL LC_EN AUTO_NL FDX
# Other switches may be set for operator convenience or communication
# requirements. I recommend
# DISABLE_KB_LOCK LOCAL_OFF 103 202_OFF
# ETX_OFF EOT_OFF
# Most of these terminals required an option ROM to support lower case display.
# Open the case and look at the motherboard; if you see an open 24-pin DIP
# socket, you may be out of luck.
#
# (adm3a: some capabilities merged in from BRl entry -- esr)
adm3a|lsi adm3a:\
:am:bs:\
:co#80:li#24:\
:bl=^G:cl=1\032:cm=\E=%+ %+ :cr=^M:do=^J:ho=^^:kd=^J:kl=^H:\
:kr=^L:ku=^K:le=^H:ma=^K^P:nd=^L:nl=^J:rs=^N:sf=^J:up=^K:
adm3a+|adm3a plus:\
:kb=^H:tc=adm3a:
# (adm5: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" & duplicate ":do=^J:" -- esr)
adm5|lsi adm5:\
:sg#1:\
:bl=^G:cd=\EY:ce=\ET:cr=^M:do=^J:kb=^H:kh=^^:se=\EG:so=\EG:\
:tc=adm3a+:
# A lot of terminals other than adm11s use these. Wherever you see
# use=adm+sgr with some of its capabilities disabled, try the
# disabled ones. They may well work but not have been documented or
# expressed in the using entry. We'd like to cook up an :sa: but the
# :ae:/:as: sequences of the using entries vary too much.
adm+sgr|adm style highlight capabilities:\
:me=\EG0:mk=\EG1:mr=\EG4:se=\EG0:so=\EG4:ue=\EG0:us=\EG8:
# LSI ADM-11 from George William Hartwig, Jr. <geo@BRL-TGR.ARPA> via BRL
# Status line additions from Stephen J. Muir <stephen%comp.lancs.ac.uk@ucl-cs>
# :kh: from <stephen%comp.lancs.ac.uk@ucl-cs.arpa>. :cl: could also
# be ^Z, according to his entry.
# (adm11: :us:=\EG4 was obviously erroneous because it also said
# :mr:=\EG4. Looking at other ADMs confirms this -- esr)
adm11|LSI ADM-11:\
:am:bs:hs:\
:co#80:kn#8:li#24:\
:bl=^G:cd=\EY:ce=\ET:cl=\E*:cm=\E=%+ %+ :cr=^M:do=^J:ds=\Eh:\
:fs=\E(\r:ho=^^:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:\
:k5=^AD\r:k6=^AE\r:k7=^AF\r:k8=^AG\r:kb=^H:kd=^J:kh=^^:\
:kl=^H:kr=^L:ku=^K:le=^H:mb=\EG2:nd=^L:nl=^J:nw=^M^J:ta=^I:\
:ts=\EF\E):up=^K:tc=adm+sgr:
# From: Andrew Scott Beals <bandy@lll-crg.ARPA>
# Corrected by Olaf Siebert <rhialto@polder.ubc.kun.nl>, 11 May 1995
# Supervisor mode info by Ari Wuolle, <awuolle@delta.hut.fi>, 27 Aug 1996
# (adm12: removed obsolete ":kn:ma=j^Jk^P^K^Pl ^R^L^L :". This formerly had
# :is:=\Eq but that looked wrong; this :is: is from Dave Yost <esquire!yost>
# via BRL. That entry asserted :sg#1:, but I've left that out because
# neither earlier nor later ADMSs have it -- esr)
#
# You will need to get into the supervisor setup before you can set
# baudrate etc. for your ADM-12+. Press Shift-Ctrl-Setup and you should
# see a lot more setup options.
#
# While in supervisor setup you can also use following codes:
#
# Ctrl-P Personality character selections (configure for example what
# arrow keys send, if I recall correctly)
# Ctrl-T tabs 1-80 use left&right to move and up to set and
# Ctrl-V tabs 81-158 down to clear tab. Shift-Ctrl-M sets right margin at cursor
# Ctrl-B Binary setup (probably not needed. I think that everything can
# be set using normal setup)
# Ctrl-A Answerback mode (enter answerback message)
# Ctrl-U User friendly mode (normal setup)
# Ctrl-D Defaults entire setup and function keys from EPROM tables
# Ctrl-S Save both setup and functions keys. Takes from 6 to 10 seconds.
# Ctrl-R Reads both setup and functions keys from NVM.
# Shift-Ctrl-X Unlock keyboard and cancel received X-OFF status
#
# ADM-12+ supports hardware handshaking, but it is DTR/CTS as opposed to
# RTS/CTS used nowadays with virtually every modem and computer. 19200
# bps works fine with hardware flow control.
#
# The following null-modem cable should fix this and enable you to use
# RTS/CTS handshaking (which Linux supports, use CRTSCTS setting). Also
# set ADM-12+ for DTR handshaking from supervisor setup.
#
# PC Serial ADM-12+
# -------- -------
# 2 - 3
# 3 - 2
# 4 - 5
# 5 - 20
# 6,8 - 4
# 7 - 7
# 20 - 6,8
#
adm12|lsi adm12:\
:am:bs:mi:pt:\
:co#80:it#8:li#24:ug#1:\
:al=\EE:bl=^G:cd=\EY:ce=\ET:cl=^Z:cm=\E=%+ %+ :cr=^M:ct=\E0:\
:dc=\EW:dl=\ER:do=^J:ei=\Er:ho=^^:ic=\EQ:im=\Eq:\
:is=\E0 \E1 \E1 \E1 \E1 \E1 \E1 \E1 \E1:\
:k0=^A0\r:k1=^A1\r:k2=^A2\r:k3=^A3\r:k4=^A4\r:k5=^A5\r:\
:k6=^A6\r:k7=^A7\r:k8=^A8\r:k9=^A9\r:kd=^J:kl=^H:kr=^L:\
:ku=^K:le=^H:nd=^L:st=\E1:up=^K:tc=adm+sgr:
# (adm20: removed obsolete ":kn#7:" -- esr)
adm20|lear siegler adm20:\
:am:bs:\
:co#80:it#8:li#24:\
:al=\EE:bl=^G:bt=\EI:cd=\EY:ce=\ET:cl=^Z:\
:cm=\E=%i%r%+^_%+^_:cr=^M:dc=\EW:dl=\ER:ei=:ho=^^:ic=\EQ:\
:im=:k1=^A:k2=^B:k3=^W:k4=^D:k5=^E:k6=^X:k7=^Z:le=^H:me=\E(:\
:nd=^L:se=\E(:so=\E):ta=^I:up=^K:
adm21|lear siegler adm21:\
:sg#1:\
:al=30*\EE:bl=^G:cd=\EY:ce=\ET:cr=^M:dc=\EW:dl=30*\ER:do=^J:\
:ei=:ic=\EQ:im=:kb=^H:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:mk@:sf=^J:\
:tc=adm+sgr:tc=adm3a:
# (adm22: ":em=:" was an obvious typo for ":ei=:"; also,
# removed obsolete ":kn#7:ma=j^Jk^P^K^Pl ^R^L^L :";
# removed bogus-looking \200 from before :cm:. -- esr)
adm22|lsi adm22:\
:am:bs:\
:co#80:li#24:\
:al=\EE:bl=^G:bt=\EI:cd=\Ey:ce=\Et:cl=\E+:cm=\E=%+ %+ :\
:cr=^M:dc=\EW:dl=\ER:do=^J:ei=:ho=^^:ic=\EQ:im=:\
:is=\E%\014\014\014\016\003\200\003\002\003\002\200\200\200\200\200\200\200\200\200\200\200:\
:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
:k7=^AF\r:kb=^H:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:l1=F1:l2=F2:\
:l3=F3:l4=F4:l5=F5:l6=F6:l7=F7:le=^H:me=\E(:nd=^L:se=\E(:\
:so=\E):ta=\Ei:up=^K:
# ADM 31 DIP Switches
#
# This information comes from two versions of the manual for the
# Lear-Siegler ADM 31.
#
# Main board:
# rear of case
# +-||||-------------------------------------+
# + S1S2 ||S +
# + ||3 +
# + +
# + ||S +
# + ||4 +
# + +
# + +
# + +
# + +
# + +
# +-+ +-+
# + +
# + S5 S6 S7 +
# + == == == +
# +----------------------------------------------+
# front of case (keyboard)
#
# S1 - Data Rate - Modem
# S2 - Data Rate - Printer
# ------------------------
# Data Rate Setting
# -------------------
# 50 0 0 0 0
# 75 1 0 0 0
# 110 0 1 0 0
# 134.5 1 1 0 0
# 150 0 0 1 0
# 300 1 0 1 0
# 600 0 1 1 0
# 1200 1 1 1 0
# 1800 0 0 0 1
# 2000 1 0 0 1
# 2400 0 1 0 1
# 3600 1 1 0 1
# 4800 0 0 1 1
# 7200 1 0 1 1
# 9600 0 1 1 1
# x 1 1 1 1
#
# S3 - Interface/Printer/Attributes
# ---------------------------------
# Printer Busy Control
# sw1 sw2 sw3
# ---------------
# off off off Busy not active, CD disabled
# off off on Busy not active, CD enabled
# off on off Busy active on J5-20, CD disabled
# on off off Busy active on J5-19, CD disabled - Factory Set.
# on off on Busy active on J5-19, CD enabled
#
# sw4 Used in conjuction with S4 for comm interface control - Fact 0
#
# sw5 Secondary Channel Control (Hardware implementation only) - Fact 0
#
# sw6 ON enables printer BUSY active LOW - Factory Setting
# OFF enables printer BUSY active HIGH - If set to this, ADM31 senses
#
# sw7 ON - steady cursor - Factory Setting
# OFF - blinking cursor
#
# sw8 ON causes selected attribute character to be displayed
# OFF causes SPACE to be displayed instead - Factory Setting
#
# S4 - Interface
# --------------
# Modem Interface
# S3 S4 S4 S4 S4
# sw4 sw1 sw2 sw3 sw4
# ---------------------------
# OFF ON OFF ON OFF Enable RS-232C interface, Direct Connect and
# Current Loop disabled - Factory Setting
# ON ON OFF ON OFF Enable Current Loop interface, Direct Connect
# disabled
# OFF OFF ON OFF ON Enable Direct Connect interface, RS-232C and
# Current Loop Disabled
#
# sw5 ON disables dot stretching mode - Factory Setting
# OFF enables dot stretching mode
# sw6 ON enables blanking function
# OFF enables underline function - Factory Setting
# sw7 ON causes NULLS to be displayed as NULLS
# OFF causes NULLS to be displayed as SPACES - Factory Setting
#
# S5 - Word Structure
# -------------------
# sw1 ON enables BREAK key - Factory Setting
# OFF disables BREAK key
# sw2 ON selects 50Hz monitor refresh rate
# OFF selects 60Hz monitor refresh rate - Factory Setting
#
# Modem Port Selection
# sw3 sw4 sw5
# ---------------
# ON ON ON Selects 7 DATA bits, even parity, 2 STOP bits
# OFF ON ON Selects 7 DATA bits, odd parity, 2 STOP bits
# ON OFF ON Selects 7 DATA bits, even parity, 1 STOP bit - Factory Set.
# OFF OFF ON Selects 7 DATA bits, odd parity, 1 STOP bit
# ON ON OFF Selects 8 DATA bits, no parity, 2 STOP bits
# OFF ON OFF Selects 8 DATA bits, no parity, 1 STOP bit
# ON OFF OFF Selects 8 DATA bits, even parity, 1 STOP bit
# OFF OFF OFF Selects 8 DATA bits, odd parity, 1 STOP bit
#
# sw6 ON sends bit 8 a 1 (mark)
# OFF sends bit 8 as 0 (space) - Factory Setting
# sw7 ON selects Block Mode
# OFF selects Conversation Mode - Factory Setting
# sw8 ON selects Full Duplex operation
# OFF selects Half Duplex operation - Factory Setting
#
# S6 - Printer
# ------------
# sw1, sw2, sw6, sw7 Reserved - Factory 0
#
# Printer Port Selection
# same as Modem above, bit 8 (when 8 DATA bits) is always = 0
#
# sw8 ON enables Printer Port
# OFF disables Printer Port - Factory Setting
#
# S7 - Polling Address
# --------------------
# sw1-7 Establish ASCII character which designates terminal polling address
# ON = logic 0
# OFF = logic 1 - Factory Setting
# sw8 ON enables Polling Option
# OFF disables Polling Option - Factory Setting
#
#
# On some older adm31s, S4 does not exist, and S5-sw6 is not defined.
#
# This adm31 entry uses underline as the standout mode.
# If the adm31 gives you trouble with standout mode, check the DIP switch in
# position 6, bank @c11, 25% from back end of the circuit board. Should be
# OFF. If there is no such switch, you have an old adm31 and must use oadm31.
# (adm31: removed obsolete ":ma=j^Jk^P^K^Pl ^R^L^L :" -- esr)
adm31|lsi adm31 with sw6 set for underline mode:\
:am:bs:mi:\
:co#80:li#24:\
:al=\EE:bl=^G:cd=\EY:ce=\ET:cl=\E*:cm=\E=%+ %+ :cr=^M:\
:dc=\EW:dl=\ER:do=^J:ei=\Er:ho=^^:im=\Eq:is=\Eu\E0:k0=^A0\r:\
:k1=^A1\r:k2=^A2\r:k3=^A3\r:k4=^A4\r:k5=^A5\r:k6=^A6\r:\
:k7=^A7\r:k8=^A8\r:k9=^A9\r:kd=^J:kl=^H:kr=^L:ku=^K:le=^H:\
:me=\EG0:nd=^L:se=\EG0:sf=^J:so=\EG1:ue=\EG0:up=^K:us=\EG1:
adm31-old|o31|old adm31:\
:so=\EG4:ue@:us@:tc=adm31:
# LSI ADM-36 from Col. George L. Sicherman <gloria!colonel> via BRL
adm36|LSI ADM36:\
:bs:pt:\
:kn#4:\
:if=/usr/share/tabset/vt100:\
:is=\E<\E>\E[6;?2;?7;?8h\E[4;20;?1;?3;?4;?5;?6;?18;?19l:\
:tc=vt100:
# (adm42: removed obsolete ":ma=^K^P:" -- esr)
adm42|lsi adm42:\
:am:bs:\
:co#80:li#24:\
:al=270\EE:bl=^G:bt=\EI:cd=\EY:ce=\ET:cl=\E;:cm=\E=%+ %+ :\
:cr=^M:dc=\EW:dl=\ER:do=^J:ei=\Er:im=\Eq:ip=6*:kd=^J:kh=^^:\
:kl=^H:kr=^L:ku=^K:le=^H:mk@:nd=^L:pc=\177:sf=^J:ta=^I:ue@:\
:up=^K:us@:vs=\EC\E3 \E3(:tc=adm+sgr:
# The following termcap for the Lear Siegler ADM-42 leaves the
# "system line" at the bottom of the screen blank (for those who
# find it distracting otherwise)
adm42-ns|lsi adm-42 with no system line:\
:al=\EE\EF \011:bt=\EI\EF \011:cd=\EY\EF \011:\
:ce=\ET\EF \011:cl=\E;\EF \011:cm=\E=%+ %+ \EF \011:\
:dc=\EW\EF \011:dl=\ER\EF \011:ei=\Er\EF \011:\
:im=\Eq\EF \011:tc=adm42:
# ADM 1178 terminal -- rather like an ADM-42. Manual is dated March 1 1985.
# The insert mode of this terminal is commented out because it's broken for our
# purposes in that it will shift the position of every character on the page,
# not just the cursor line!
# From: Michael Driscoll <fenris@lightspeed.net> 10 July 1996
adm1178|1178|lsi adm1178:\
:am:\
:co#80:li#24:sg#1:ug#1:\
:al=\EE:bl=^G:bt=\EI:cd=\EY:ce=\ET:cl=\E+:cm=\E=%+ %+ :\
:cr=^M:dc=\EW:dl=\ER:do=^J:ho=^^:ip=6*:kb=^H:kd=^J:kl=^H:\
:le=^H:md=\E(:me=\E):mr=\EG4:nd=^L:nw=^M^J:pc=\177:se=\EG0:\
:sf=^J:so=\EG4:ta=^I:ue=\EG0:up=^K:us=\EG1:vs=\EC\E3 \E3(:
#### Prime
#
# Yes, Prime made terminals. These entries were posted by Kevin J. Cummings
# <cummings@primerd.prime.com> on 14 Dec 1992 and lightly edited by esr.
# Prime merged with ComputerVision in the late 1980s; you can reach them at:
#
# ComputerVision Services
# 500 Old Connecticut Path
# Framingham, Mass.
#
# Standout mode is dim reverse-video.
pt100|pt200|wren|fenix|prime pt100/pt200:\
:am:bw:mi:ms:\
:co#80:it#8:li#24:\
:DC=\E[%dP:DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:\
:al=\E[L\E[t:bt=\E[Z:cd=\E[J\E[r:ce=\E[K\E[t:cl=\E?:\
:cm=\E0%+!%+!:cr=^M:dc=\E[P:dl=\E[M:do=\ED:ei=\E[4l:\
:ho=\E$B:im=\E[4h:kb=^H:kd=\E[B:ke=\E[>13l:kh=\E$A:kl=\E[D:\
:kr=\E[C:ks=\E[>13h:ku=\E[A:le=^H:me=\E[m:mh=\E[2m:nd=\E[C:\
:nw=^M^J:se=\E[m:sf=^J:so=\E[2;7m:ta=^I:te=:\
:ti=\E[>1l\E[>2l\E[>16l\E[4l\E[>9l\E[20l\E[>3l\E[>7h\E[>12l\E[1Q:\
:ue=\E[m:up=\EM:us=\E[4m:vb=\E$\E$P:
pt100w|pt200w|wrenw|fenixw|prime pt100/pt200 in 132-column mode:\
:co#132:\
:cm=\E[%i%d;%dH:tc=pt100:
pt250|Prime PT250:\
:se@:so@:tc=pt100:
pt250w|Prime PT250 in 132-column mode:\
:se@:so@:tc=pt100w:
#### Qume (qvt)
#
# Qume, Inc.
# 3475-A North 1st Street
# San Jose CA 95134
# Vox: (800)-457-4447
# Fax: (408)-473-1510
# Net: josed@techsupp.wyse.com (Jose D'Oliveira)
#
# Qume was bought by Wyse, but still (as of early 1995) has its own support
# group and production division.
#
# Discontinued Qume models:
#
# The qvt101 and qvt102 listed here are long obsolete; so is the qvt101+
# built to replace them, and a qvt119+ which was a 101+ with available wide
# mode (132 columns). There was a qvt103 which added vt100/vt131 emulations
# and an ANSI-compatible qvt203 that replaced it. Qume started producing
# ANSI-compatible terminals with the qvt323 and qvt61.
#
# Current Qume models (as of February 1995):
#
# All current Qume terminals have ANSI-compatible operation modes.
# Qume is still producing the qvt62, which features emulations for other
# popular lines such as ADDS, and dual-host capabilities. The qvt82 is
# designed for use as a SCO ANSI terminal. The qvt70 is a color terminal
# with many emulations including Wyse370, Wyse 325, etc. Their newest
# model is the qvt520, which is vt420-compatible.
#
# There are some ancient printing Qume terminals under `Daisy Wheel Printers'
#
# If you inherit a Qume without docs, try Ctrl-Shift-Setup to enter its
# setup mode. Shift-s should be a configuration save to NVRAM.
qvt101|qvt108|qume qvt 101 and QVT 108:\
:sg#1:tc=qvt101+:
# This used to have :vs=\E.2: but no :ve: or :vi:. The BSD termcap
# file had :vs=\EM4 \200\200\200:. I've done the safe thing and yanked
# both. The :mr: is from BSD, which also claimed bold=\E( and dim=\E).
# What seems to be going on here is that this entry was designed so that
# the normal highlight is bold and standout is dim plus something else
# (reverse-video maybe? But then, are there two :mr: sequences?)
qvt101+|qvt101p|qume qvt 101 PLUS product:\
:am:bw:hs:ul:\
:co#80:li#24:sg#0:\
:al=\EE:bl=^G:bt=\EI:cd=\EY:ce=\ET:cl=^Z:cm=\E=%+ %+ :cr=^M:\
:ct=\E3:dc=\EW:dl=\ER:do=^J:ds=\Eg\Ef\r:ei=:fs=^M:ho=^^:\
:ic=\EQ:im=:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:\
:k6=^AE\r:k7=^AF\r:k8=^AG\r:k9=^AH\r:k;=^AI\r:kA=\EE:\
:kB=\EI:kE=\ET:kI=\EQ:kL=\ER:kS=\EY:kb=^H:kd=^J:kh=^^:kl=^H:\
:kr=^L:ku=^K:le=^H:mk@:nd=^L:pf=\EA:po=\E@:se=\E(:sf=^J:\
:so=\E0P\E):st=\E1:ta=^I:ts=\Eg\Ef:up=^K:vb=\Eb\Ed:ve=\E.4:\
:tc=adm+sgr:
qvt102|qume qvt 102:\
:ve=\E.:tc=qvt101:
# (qvt103: added <rmam>/<smam> based on init string -- esr)
qvt103|qume qvt 103:\
:am:xn:xo:\
:co#80:it#8:li#24:vt#3:\
:DO=\E[%dB:LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:\
:UP=\E[%dA:bl=^G:cd=50\E[J:ce=3\E[K:cl=50\E[H\E[2J:\
:cm=5\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:do=^J:\
:ho=\E[H:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:kb=^H:kd=\EOB:\
:ke=\E[?1l\E>:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:\
:mb=2\E[5m:md=2\E[1m:me=2\E[m:mr=2\E[7m:nd=2\E[C:rc=\E8:\
:rs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:sc=\E7:se=2\E[m:\
:sf=^J:so=2\E[7m:sr=5\EM:st=\EH:ta=^I:ue=2\E[m:up=2\E[A:\
:us=2\E[4m:
qvt103-w|qume qvt103 132 cols:\
:co#132:li#24:\
:rs=\E>\E[?3h\E[?4l\E[?5l\E[?8h:tc=qvt103:
qvt119+|qvt119p|qvt119|qume qvt 119 and 119PLUS terminals:\
:am:hs:mi:ms:\
:co#80:li#24:sg#0:ug#0:\
:al=\EE:bl=^G:bt=\EI:cd=\Ey:ce=\Et:cl=\E*1:cm=\E=%+ %+ :\
:cr=^M:ct=\E3:dc=\EW:dl=\ER:do=^J:ds=\Eg\Ef\r:ei=\Er:fs=^M:\
:ho=^^:im=\Eq:is=\EDF\EC\EG0\Er\E(\E%EX:k0=^AI\r:\
:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
:k7=^AF\r:k8=^AG\r:k9=^AH\r:kb=^H:kd=^J:kh=^^:kl=^H:kr=^L:\
:ku=^K:le=^H:nd=^L:pf=\EA:po=\E@:sf=^J:sr=\EJ:st=\E1:ta=^I:\
:ts=\Eg\Ef:up=^K:us=\EG8:vb=\En0\En1:ve=\E.4:vs=\E.2:\
:tc=adm+sgr:
qvt119+-25|qvt119p-25|QVT 119 PLUS with 25 data lines:\
:li#25:tc=qvt119+:
qvt119+-w|qvt119p-w|qvt119-w|QVT 119 and 119 PLUS in 132 column mode:\
:co#132:\
:is=\EDF\EC\EG0\Er\E(\E%\EX\En4:tc=qvt119+:
qvt119+-25-w|qvt119p-25-w|qvt119-25-w|QVT 119 and 119 PLUS 132 by 25:\
:li#25:tc=qvt119+:
qvt203|qvt203+|qume qvt 203 Plus:\
:al=99\E[L:dc=7\E[P:dl=99\E[M:ei=\E[4l:im=\E[4h:ip=7:\
:k0=\E[29~:k1=\E[17~:k2=\E[18~:k3=\E[19~:k4=\E[20~:\
:k5=\E[21~:k6=\E[23~:k7=\E[24~:k8=\E[25~:k9=\E[28~:\
:sf=30\n:tc=qvt103:
qvt203-w|qvt203-w-am|qume qvt 203 PLUS in 132 cols (w/advanced video):\
:co#132:li#24:\
:rs=\E>\E[?3h\E[?4l\E[?5l\E[?8h:tc=qvt203:
#
# Since a command is present for enabling 25 data lines,
# a specific terminfo entry may be generated for the 203.
# If one is desired for the QVT 119 PLUS then 25 lines must
# be selected in the status line (setup line 9).
#
qvt203-25|QVT 203 PLUS with 25 by 80 column mode:\
:co#80:li#25:\
:is=\E[=40h\E[?3l:tc=qvt203:
qvt203-25-w|QVT 203 PLUS with 25 by 132 columns:\
:co#132:li#25:\
:rs=\E[?3h\E[=40h:tc=qvt203:
#### Televideo (tvi)
#
# TeleVideo
# 550 East Brokaw Road
# PO Box 49048 95161
# San Jose CA 95112
# Vox: (408)-954-8333
# Fax: (408)-954-0623
#
#
# These require incredible amounts of padding.
#
# All of these terminals (912 to 970 and the tvipt) are discontinued. Newer
# Televideo terminals are ANSI and PC-ANSI compatible.
tvi803|televideo 803:\
:cl=10\E*:tc=tvi950:
# Vanilla tvi910 -- W. Gish <cswarren@violet> 10/29/86
# Switch settings are:
#
# S1 1 2 3 4
# D D D D 9600
# D D D U 50
# D D U D 75
# D D U U 110
# D U D D 135
# D U D U 150
# D U U D 300
# D U U U 600
# U D D D 1200
# U D D U 1800
# U D U D 2400
# U D U U 3600
# U U D D 4800
# U U D U 7200
# U U U D 9600
# U U U U 19200
#
# S1 5 6 7 8
# U D X D 7N1 (data bits, parity, stop bits) (X means ignored)
# U D X U 7N2
# U U D D 7O1
# U U D U 7O2
# U U U D 7E1
# U U U U 7E2
# D D X D 8N1
# D D X U 8N2
# D U D D 8O1
# D U U U 8E2
#
# S1 9 Autowrap
# U on
# D off
#
# S1 10 CR/LF
# U do CR/LF when CR received
# D do CR when CR received
#
# S2 1 Mode
# U block
# D conversational
#
# S2 2 Duplex
# U half
# D full
#
# S2 3 Hertz
# U 50
# D 60
#
# S2 4 Edit mode
# U local
# D duplex
#
# S2 5 Cursor type
# U underline
# D block
#
# S2 6 Cursor down key
# U send ^J
# D send ^V
#
# S2 7 Screen colour
# U green on black
# D black on green
#
# S2 8 DSR status (pin 6)
# U disconnected
# D connected
#
# S2 9 DCD status (pin 8)
# U disconnected
# D duplex
#
# S2 10 DTR status (pin 20)
# U disconnected
# D duplex
# (tvi910: removed obsolete ":ma=^Kk^Ll^R^L:"; added :kh:, :le:, :do:,
# :sf:, <hpa>, <vpa>, :am:, :ms: from SCO entry -- esr)
tvi910|televideo model 910:\
:am:bs:ms:\
:co#80:it#8:li#24:sg#1:\
:bl=^G:bt=\EI:cd=\EY:ce=\ET:ch=\E]%+ :cl=^Z:cm=\E=%+ %+ :\
:cr=^M:cv=\E[%+ :do=^J:ho=\E=\001\001:\
:if=/usr/share/tabset/stdcrt:k0=^AI\r:k1=^A@\r:k2=^AA\r:\
:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:k7=^AF\r:k8=^AG\r:\
:k9=^AH\r:kb=^H:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:le=^H:mk@:nd=^L:\
:sf=^J:ta=^I:up=^K:tc=adm+sgr:
# From: Alan R. Rogers <rogers%albany@csnet-relay>
# as subsequently hacked over by someone at SCO
# (tvi910+: removed obsolete ":ma=^K^P^L :" -- esr)
#
# Here are the 910+'s DIP switches (U = up, D = down, X = don't care):
#
# S1 1 2 3 4:
# D D D D 9600 D D D U 50 D D U D 75 D D U U 110
# D U D D 135 D U D U 150 D U U D 300 D U U U 600
# U D D D 1200 U D D U 1800 U D U D 2400 U D U U 3600
# U U D D 4800 U U D U 7200 U U U D 9600 U U U U 19200
#
# S1 5 6 7 8:
# U D X D 7N1 U D X U 7N2 U U D D 7O1 U U D U 7O2
# U U U D 7E1 U U U U 7E2 D D X D 8N1 D D X U 8N2
# D U D D 8O1 D U U U 8E2
#
# S1 9 Autowrap (U = on, D = off)
# S1 10 CR/LF (U = CR/LF on CR received, D = CR on CR received)
# S2 1 Mode (U = block, D = conversational)
# S2 2 Duplex (U = half, D = full)
# S2 3 Hertz (U = 50, D = 60)
# S2 4 Edit mode (U = local, D = duplex)
# S2 5 Cursor type (U = underline, D = block)
# S2 6 Cursor down key (U = send ^J, D = send ^V)
# S2 7 Screen colour (U = green on black, D = black on green)
# S2 8 DSR status (pin 6) (U = disconnected, D = connected)
# S2 9 DCD status (pin 8) (U = disconnected, D = connected)
# S2 10 DTR status (pin 20) (U = disconnected, D = connected)
#
tvi910+|televideo 910+:\
:al=33*\EE:dc=\EW:dl=33*\ER:ei=:ho=^^:ic=\EQ:im=:k0=^A@\r:\
:k1=^AA\r:k2=^AB\r:k3=^AC\r:k4=^AD\r:k5=^AE\r:k6=^AF\r:\
:k7=^AG\r:k8=^AH\r:k9=^AI\r:ll=\E=7\040:tc=tvi910:
# (tvi912: removed obsolete ":ma=^K^P^L :", added :vb: and
# :kh: from BRL entry -- esr)
tvi912|tvi914|tvi920|old televideo 912/914/920:\
:am:bs:ms:pt:\
:co#80:it#8:li#24:sg#1:ug#1:\
:al=33*\EE:bl=^G:cd=\Ey:ce=\ET:cl=^Z:cm=\E=%+ %+ :cr=^M:\
:ct=\E3:dc=\EW:dl=33*\ER:do=^J:ei=:ho=^^:ic=\EQ:\
:if=/usr/share/tabset/stdcrt:im=:k0=^AI\r:k1=^A@\r:\
:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:k7=^AF\r:\
:k8=^AG\r:k9=^AH\r:kb=^H:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:le=^H:\
:nd=^L:se=\Ek:sf=^J:so=\Ej:st=\E1:ta=^I:ue=\Em:up=^K:us=\El:\
:vb=\Eb\Ed:
# We got some new tvi912c terminals that act really weird on the regular
# termcap, so one of our gurus worked this up. Seems that cursor
# addressing is broken.
tvi912cc|tvi912 at cowell college:\
:cm@:tc=tvi912c:
# tvi{912,920}[bc] - TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C
# From: Benjamin C. W. Sittler
#
# Someone has put a scanned copy of the manual online at:
# http://vt100.net/televideo/912b-om/
#
# These terminals were produced ca. 1979, and had a 12" monochrome
# screen, supported 75-9600 baud (no handshaking), monochrome, 7-bit
# ASCII, and were generally similar to adm3a but with attributes
# (including some with magic cookies), fancy half-duplex mode, and
# different bugs.
#
# Some operations reqire truly incredible amounts of padding. The
# insert_line (:al:) and delete_line (:dl:) operations in particular
# are so slow as to be nearly unusable.
#
# There may or may not have been a separate, earlier series of 912/920
# terminals (without the "B" and "C" suffix); I have never seen one,
# and the manual only describes the "B" and "C" series. The 912 and 920
# are quite distinct from the 914 and 924, which were much nicer non-
# magic-cookie terminals similar to the 950.
#
# This is a new description for the following TeleVideo terminals,
# distinguished chiefly by their keyboards:
#
# TVI-912B - very odd layout, no function keys (84 keys)
# TVI-920B - typewriter layout, no function keys (103 keys)
# TVI-912C - very odd layout, function keys F1-F11 (82 keys)
# TVI-920C - typewriter layout, function keys F1-F11 (101 keys)
#
# To choose a setting for the TERM variable, start with the model:
#
# Model || base name
# ----------||-----------
# TVI-912B || tvi912b
# TVI-912C || tvi912c
# TVI-920B || tvi920b
# TVI-920C || tvi920c
#
# Then add a suffix from the following table describing installed options
# and how you'd like to use the terminal:
#
# Use Video | Second | Visual | Magic | Page || feature
# Attributes | Page | Bell | Cookies | Print || suffix
# ------------|--------|--------|---------|-------||---------
# No | No | N/A | N/A | No || -unk
# No | No | N/A | N/A | Yes || -p
# No | Yes | No | N/A | No || -2p-unk
# No | Yes | No | N/A | Yes || -2p-p
# No | Yes | Yes | N/A | No || -vb-unk
# No | Yes | Yes | N/A | Yes || -vb-p
# Yes | No | N/A | No | N/A ||
# Yes | No | N/A | Yes | N/A || -mc
# Yes | Yes | No | No | N/A || -2p
# Yes | Yes | No | Yes | N/A || -2p-mc
# Yes | Yes | Yes | No | N/A || -vb
# Yes | Yes | Yes | Yes | N/A || -vb-mc
#
# So e.g. a model 920 C with second page memory option, visual bell
# and no magic cookies would be tvi920c-vb; a model 912 B without the
# second page memory option and using magic cookies would be
# tvi912b-mc
#
# PADDING
#
# At 9600 baud, the terminal is prone to overflow its input buffer
# during complex operations (insert/delete
# character/line/screen/page), and it does not signal this over the
# RS232 cable. The typical symptom of an overrun is that the terminal
# starts beeping, and output becomes garbled.
#
# The padding delays in this terminfo were derived using tack(1)
# running on a Linux box connected to a TVI-920C with a later-model
# (A49C1-style) ROM running at 9600 baud, so your mileage may
# vary. The numbers below seem to give the terminal enough time so
# that it doesn't overflow its input buffer and start losing
# characters.
#
# KEYS
#
# If you want to use the FUNCT key on a tvi912[bc], use the
# corresponding tvi920[bc] terminfo with FUNCT + ... equivalents from
# the following table (these also work on the 920 series):
#
# Unshifted Function Keys:
#
# Key | capname|| Equivalent
# -----|--------||------------
# F1 | :k1: || FUNCT + @
# F2 | :k2: || FUNCT + A
# F3 | :k3: || FUNCT + B
# F4 | :k4: || FUNCT + C
# F5 | :k5: || FUNCT + D
# F6 | :k6: || FUNCT + E
# F7 | :k7: || FUNCT + F
# F8 | :k8: || FUNCT + G
# F9 | :k9: || FUNCT + H
# F10 | <kf10> || FUNCT + I
# F11 | <kf11> || FUNCT + J
#
# Shifted Function Keys:
#
# SHIFT + Key | capname|| Equivalent
# -------------|--------||------------
# SHIFT + F1 | <kf12> || FUNCT + `
# SHIFT + F2 | <kf13> || FUNCT + a
# SHIFT + F3 | <kf14> || FUNCT + b
# SHIFT + F4 | <kf15> || FUNCT + c
# SHIFT + F5 | <kf16> || FUNCT + d
# SHIFT + F6 | <kf17> || FUNCT + e
# SHIFT + F7 | <kf18> || FUNCT + f
# SHIFT + F8 | <kf19> || FUNCT + g
# SHIFT + F9 | <kf20> || FUNCT + h
# SHIFT + F10 | <kf21> || FUNCT + i
# SHIFT + F11 | <kf22> || FUNCT + j
#
# PORTS AND SWITCH SETTINGS
#
# Here are the switch settings for the TVI-912B/TVI-920B and
# TVI-912C/TVI-920C:
#
# S1 (Line), and S3 (Printer) baud rates -- put one, and only one, switch down:
# 2: 9600 3: 4800 4: 2400 5: 1200
# 6: 600 7: 300 8: 150 9: 75
# 10: 110
#
# S2 UART/Terminal options:
# Up Down
# 1: Not used Not allowed
# 2: Alternate character set Standard character set
# 3: Full duplex Half duplex
# 4: 50 Hz refresh 60 Hz refresh
# 5: No parity Send parity
# 6: 2 stop bits 1 stop bit
# 7: 8 data bits 7 data bits
# 8: Not used Not allowed on Rev E or lower
# 9: Even parity Odd parity
# 10: Steady cursor Blinking cursor
# (On Rev E or lower, use W25 instead of switch 10.)
#
# S5 UART/Terminal options:
# Open Closed
# 1: P3-6 Not connected DSR received on P3-6
# 2: P3-8 Not connected DCD received on P3-8
#
# 3 Open, 4 Open: P3-20 Not connected
# 3 Open, 4 Closed: DTR on when terminal is on
# 3 Closed, 4 Open: DTR is connected to RTS
# 3 Closed, 4 Closed: Not allowed
#
# 5 Closed: HDX printer (hardware control) Rev. K with extension port off,
# all data transmitted out of the modem port (P3) will also be
# transmitted out of the printer port (P4).
#
# 6 Open, 7 Open: Not allowed
# 6 Open, 7 Closed: 20ma current loop input
# 6 Closed, 7 Open: RS232 input
# 6 Closed, 7 Closed: Not allowed
#
# Jumper options:
# If the jumper is installed, the effect will occur (the next time the terminal
# is switched on).
#
# S4/W31: Enables automatic LF upon receipt of CR from
# remote or keyboard.
# S4/W32: Enables transmission of EOT at the end of Send. If not
# installed, a carriage return is sent.
# S4/W33: Disables automatic carriage return in column 80.
# S4/W34: Selects Page Print Mode as initial condition. If not
# installed, Extension Mode is selected.
#
# NON-STANDARD CAPABILITIES
#
# Sending <u9> or <u7> returns a cursor position report in the format
# YX\r, where Y and X are as in :cm:. This format is described in
# <u8> and <u6>, but it's not clear how one should write an
# appropriate scanf string, since we need to subtract %' ' from the
# character after reading it. The <u9> capability is used by tack(1)
# to synchronize during padding tests, and seems to work for that
# purpose.
#
# This description also includes the obsolete termcap capabilities
# has_hardware_tabs (:pt:) and backspaces_with_bs (:bs:).
#
# FEATURES NOT YET DESCRIBED IN THIS TERMINFO
#
# The FUNCT modifier actually works with every normal key by sending
# ^AX\r, where X is the sequence normally sent by that key. This is a
# sort of meta key not currently describable in terminfo.
#
# There are quite a few other keys (especially on the 920 models,) but
# they are for the most part only useful in block mode.
#
# These terminals have lots of forms manipulation features, mainly
# useful in block mode, including "clear X to nulls" (vs. "clear X to
# spaces"; nulls are sentinels for "send X" operations); "send X"
# operations for uploading all or part of the screen; and block-mode
# editing keys (they don't send escape sequences, but manipulate video
# memory directly). Block mode is used for local editing, and protect
# mode (in conjunction with the "write protect" attribute,
# a.k.a. half-intensity outside of protect mode) is used to control
# which parts of the screen are edited/sent/printed (by <mc0>).
#
# There are at least two major families of ROM, "early" and
# A49B1/A49C1; the major difference seems to be that the latter ROMs
# support a few extra escape sequences for manipulating the off-screen
# memory page, and for sending whole pages back to the host (mainly
# useful in block mode.) The descriptions in this file don't use any
# of those sequences: set cursor position including page (\E-PYX,
# where P is \s for page 0 and ! for page 1 [actually only the LSB of
# P is taken into account, so e.g. 0 and 1 work too,] and Y and X are
# as in :cm:); read cursor position (\E/), which is analogous to <u9>
# and returns PYX\r, where P is \s for page 0 or ! for page 1, and YX
# are as in :cm:, and some "send page" features mainly useful for
# forms manipulation.
#
# The keyboard enable (\E") and disable (\E#) sequences are unused,
# except that a terminal reset (:is:) enables the keyboard.
#
# Auto-flip mode (\Ev) is likely faster than the scrolling mode (\Ew)
# enabled in :is:, but auto-flip is very jarring so we don't use it.
#
# BUGS
#
# At least up to the A49B1 and A49C1 ROMs, there are no \Eb and \Ed
# sequences (I infer that in some TeleVideo terminal they may invert
# and uninvert the display) so the :vb: sequence given here is a
# cheesy page-flip instead.
#
# The back_tab (:bt:) sequence (\EI) doesn't work according to
# tack(1), so it is not included in the descriptions below.
#
# It's not clear whether auto_left_margin (:bw:) flag should be set
# for these terminals; tack says yes, so it is set here, but this
# differs from other descriptions I've seen.
#
# Extension print mode (<mc5>) echoes all characters to the printer
# port [in addition to displaying them] except for the page print mode
# sequence (<mc4>); this is a slight violation of the terminfo
# definition for <mc5> but I don't expect it to cause problems. We
# reset to page print mode in <rs1> since it may have been enabled
# accidentally.
#
# The descriptions with plus signs (+) are building blocks.
tvi912b-unk|tvi912c-unk|TeleVideo TVI-912B or TVI-912C (no attributes):\
:am:bs:bw:pt:\
:co#80:it#8:li#24:\
:@8=^M:al=100\EE:bl=^G:cd=10\Ey:ce=15\ET:cl=50\032:\
:cm=\E=%+ %+ :cr=^M:ct=\E3:dc=30\EW:dl=100\ER:do=^J:ei=:\
:ho=^^:ic=30\EQ:if=/usr/share/tabset/stdcrt:im=:\
:is=\Ew\EA\E'\E"\E(:kD=\177:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:\
:le=^H:nd=^L:pf=\EA:po=\E@:r1=\Ek\010\Em\010\Eq\032:\
:sf=10\n:st=\E1:ta=^I:u6=%.%.\r:u7=\E?:u8=%.%.\r:u9=\E?:\
:up=^K:
# This isn't included in the basic capabilities because it is
# typically unusable in combination with the full range of video
# attributes, since the magic cookie attributes turn into ASCII
# control characters, and the half-intensity ("protected") attribute
# converts all affected characters to spaces.
tvi912b+printer|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C page print support:\
:ps=\EP:
# This uses half-intensity mode (:mh:) for standout (:so:), and
# exposes no other attributes (half-intensity is the only attribute
# that does not generate a magic cookie.)
tvi912b+dim|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C half-intensity attribute support:\
:ms:\
:me=\E(:mh=\E):se=\E(:so=\E):
# Full magic-cookie attribute support, with half-intensity reverse
# video for standout. Note that we add a space in the :mh: sequence
# to give a consistent magic-cookie count. Also note that :sa: uses
# backspacing (in the TVI-supported order) to apply all requested
# attributes with only a single magic cookie.
tvi912b+mc|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C full magic-cookie attribute support:\
:sg#1:ug#1:\
:mb=\E\136:me=\E(\Ek\010\Em\010\Eq:mh=\E)\040:mk=\E_:\
:mr=\Ej:se=\E(\Ek:so=\E)\Ej:ue=\Em:us=\El:
# This uses the second page memory option to save & restore screen
# contents. If your terminal is missing the option, this description
# should still work, but that has not been tested.
tvi912b+2p|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option support:\
:te=\032\EK\E=7\040:\
:ti=50\EK\032\E(\Ek\010\Em\010\Eq\032:vb=\EK\EK:
# This simulates flashing by briefly toggling to the other page
# (kludge!)
tvi912b+vb|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option "visible bell" support:\
:bl=\EK\EK:tc=tvi912b+2p:
# Function keys (<kf12> .. <kf22> are shifted :k1: .. <kf11>)
tvi920b+fn|TeleVideo TVI-920B and TVI-920C function key support:\
:F1=^AJ\r:F2=^A`\r:F3=^Aa\r:F4=^Ab\r:F5=^Ac\r:F6=^Ad\r:\
:F7=^Ae\r:F8=^Af\r:F9=^Ag\r:FA=^Ah\r:FB=^Ai\r:FC=^Aj\r:\
:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
:k7=^AF\r:k8=^AG\r:k9=^AH\r:k;=^AI\r:
# Combinations of the basic building blocks
tvi912b-2p-unk|tvi912c-2p-unk|tvi912b-unk-2p|tvi912c-unk-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes):\
:tc=tvi912b+2p:tc=tvi912b-unk:
tvi912b-vb-unk|tvi912c-vb-unk|tvi912b-unk-vb|tvi912c-unk-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes):\
:tc=tvi912b+vb:tc=tvi912b-unk:
tvi912b-p|tvi912c-p|TeleVideo TVI-912B or TVI-912C (no attributes; page print):\
:tc=tvi912b+printer:tc=tvi912b-unk:
tvi912b-2p-p|tvi912c-2p-p|tvi912b-p-2p|tvi912c-p-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes; page print):\
:tc=tvi912b+2p:tc=tvi912b+printer:tc=tvi912b-unk:
tvi912b-vb-p|tvi912c-vb-p|tvi912b-p-vb|tvi912c-p-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes; page print):\
:tc=tvi912b+vb:tc=tvi912b+printer:tc=tvi912b-unk:
tvi912b-2p|tvi912c-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; half-intensity attribute):\
:tc=tvi912b+2p:tc=tvi912b+dim:tc=tvi912b-unk:
tvi912b-2p-mc|tvi912c-2p-mc|tvi912b-mc-2p|tvi912c-mc-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; magic cookies):\
:tc=tvi912b+2p:tc=tvi912b+mc:tc=tvi912b-unk:
tvi912b-vb|tvi912c-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; half-intensity attribute):\
:tc=tvi912b+vb:tc=tvi912b+dim:tc=tvi912b-unk:
tvi912b-vb-mc|tvi912c-vb-mc|tvi912b-mc-vb|tvi912c-mc-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; magic cookies):\
:tc=tvi912b+vb:tc=tvi912b+mc:tc=tvi912b-unk:
tvi912b|tvi912c|TeleVideo TVI-912B or TVI-912C (half-intensity attribute):\
:tc=tvi912b+dim:tc=tvi912b-unk:
tvi912b-mc|tvi912c-mc|TeleVideo TVI-912B or TVI-912C (magic cookies):\
:tc=tvi912b+mc:tc=tvi912b-unk:
tvi920b-unk|tvi920c-unk|TeleVideo TVI-920B or TVI-920C (no attributes):\
:tc=tvi920b+fn:tc=tvi912b-unk:
tvi920b-2p-unk|tvi920c-2p-unk|tvi920b-unk-2p|tvi920c-unk-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes):\
:tc=tvi920b+fn:tc=tvi912b+2p:tc=tvi912b-unk:
tvi920b-vb-unk|tvi920c-vb-unk|tvi920b-unk-vb|tvi920c-unk-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes):\
:tc=tvi920b+fn:tc=tvi912b+vb:tc=tvi912b-unk:
tvi920b-p|tvi920c-p|TeleVideo TVI-920B or TVI-920C (no attributes; page print):\
:tc=tvi920b+fn:tc=tvi912b+printer:tc=tvi912b-unk:
tvi920b-2p-p|tvi920c-2p-p|tvi920b-p-2p|tvi920c-p-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes; page print):\
:tc=tvi920b+fn:tc=tvi912b+2p:tc=tvi912b+printer:\
:tc=tvi912b-unk:
tvi920b-vb-p|tvi920c-vb-p|tvi920b-p-vb|tvi920c-p-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes; page print):\
:tc=tvi920b+fn:tc=tvi912b+vb:tc=tvi912b+printer:\
:tc=tvi912b-unk:
tvi920b-2p|tvi920c-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; half-intensity attribute):\
:tc=tvi920b+fn:tc=tvi912b+2p:tc=tvi912b+dim:\
:tc=tvi912b-unk:
tvi920b-2p-mc|tvi920c-2p-mc|tvi920b-mc-2p|tvi920c-mc-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; magic cookies):\
:tc=tvi920b+fn:tc=tvi912b+2p:tc=tvi912b+mc:\
:tc=tvi912b-unk:
tvi920b-vb|tvi920c-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; half-intensity attribute):\
:tc=tvi920b+fn:tc=tvi912b+vb:tc=tvi912b+dim:\
:tc=tvi912b-unk:
tvi920b-vb-mc|tvi920c-vb-mc|tvi920b-mc-vb|tvi920c-mc-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; magic cookies):\
:tc=tvi920b+fn:tc=tvi912b+vb:tc=tvi912b+mc:\
:tc=tvi912b-unk:
tvi920b|tvi920c|TeleVideo TVI-920B or TVI-920C (half-intensity attribute):\
:tc=tvi920b+fn:tc=tvi912b+dim:tc=tvi912b-unk:
tvi920b-mc|tvi920c-mc|TeleVideo TVI-920B or TVI-920C (magic cookies):\
:tc=tvi920b+fn:tc=tvi912b+mc:tc=tvi912b-unk:
# Televideo 921 and variants
# From: Tim Theisen <tim@cs.wisc.edu> 22 Sept 1995
# (tvi921: removed :ko=bt: before translation, I see no backtab cap;
# also added empty <acsc> to suppress tic warning -- esr)
tvi921|televideo model 921 with sysline same as page & real vi function:\
:am:bs:hs:pt:xn:xs:\
:co#80:li#24:sg#0:\
:ac=:ae=\E%%:al=\EE:as=\E$:cd=\EY:ce=\ET:cl=^Z:\
:cm=3\E=%+ %+ :cr=^M:dc=\EW:dl=1*\ER:do=^V:ds=\Ef\r\Eg:ei=:\
:fs=\Eg:ho=^^:ic=\EQ:if=/usr/share/tabset/stdcrt:im=:\
:is=\El\E"\EF1\E.3\017\EA\E<:kA=\EE:kC=^Z:kD=\EW:kE=\ET:\
:kI=\EQ:kL=1*\ER:kS=\EY:kb=^H:kd=^V:kl=^H:kr=^L:ku=^K:le=^H:\
:mk@:nd=^L:nw=^M^J:sf=^J:ta=^I:ts=\Ef\EG0:up=^K:ve=\E.3:\
:vs=\E.2:tc=adm+sgr:
# without the beeper
# (tvi92B: removed :ko=bt: before translation, I see no backtab cap;
# also added empty <acsc> to suppress tic warning -- esr)
tvi92B|televideo model 921 with sysline same as page & real vi function & no beeper:\
:am:hs:xn:xs:\
:co#80:li#24:sg#0:\
:ac=:ae=\E%%:al=\EE:as=\E$:cd=\EY:ce=\ET:cl=^Z:\
:cm=3\E=%+ %+ :cr=^M:dc=\EW:dl=1*\ER:do=^V:ds=\Ef\r\Eg:ei=:\
:fs=\Eg:ho=^^:ic=\EQ:if=/usr/share/tabset/stdcrt:im=:\
:is=\El\E"\EF1\E.3\017\EA\E<:kA=\EE:kC=^Z:kD=\EW:kE=\ET:\
:kI=\EQ:kL=1*\ER:kS=\EY:kb=^H:kd=^V:kl=^H:kr=^L:ku=^K:le=^H:\
:mk@:nd=^L:nw=^M^J:sf=^J:ta=^I:ts=\Ef\EG0:up=^K:vb=\Eb\Ed:\
:ve=\E.3:vs=\E.2:tc=adm+sgr:
# (tvi92D: removed :ko=bt: before translation, I see no backtab cap -- esr)
tvi92D|tvi92B with DTR instead of XON/XOFF & better padding:\
:al=2*\EE:dl=2*\ER:is=\El\E"\EF1\E.3\016\EA\E<:kA=2*\EE:\
:kL=2*\ER:tc=tvi92B:
# (tvi924: This used to have :ds=\Es0:, :fs=\031:. I put the new strings
# in from a BSD termcap file because it looks like they do something the
# old ones skip -- esr)
tvi924|televideo tvi924:\
:am:bw:hs:in:mi:ms:xn:xo:\
:co#80:it#8:li#24:sg#0:ws#80:\
:F1=^AK\r:F2=^AL\r:F3=^AM\r:F4=^AN\r:F5=^AO\r:al=\EE:bl=^G:\
:bt=\EI:cd=\Ey:ce=\Et:cl=\E*0:cm=\E=%+ %+ :cr=^M:\
:cs=\E_%+ %+ :ct=\E3:dc=\EW:dl=\ER:do=^V:ds=\Es0\Ef\031:\
:ei=:fs=\031\Es1:ho=^^:\
:i1=\017\E%\E'\E(\EDF\EC\EG0\EN0\Es0\Ev0:ic=\EQ:\
:if=/usr/share/tabset/stdcrt:im=:k0=^A@\r:k1=^AA\r:\
:k2=^AB\r:k3=^AC\r:k4=^AD\r:k5=^AE\r:k6=^AF\r:k7=^AG\r:\
:k8=^AH\r:k9=^AI\r:k;=^AJ\r:kA=\EE:kC=\E*0:kD=\EW:kE=\Et:\
:kI=\EQ:kL=\ER:kS=\Ey:kb=^H:kd=^V:kh=^^:kl=^H:kr=^L:ku=^K:\
:l0=F1:l1=F2:l2=F3:l3=F4:l4=F5:l5=F6:l6=F7:l7=F8:l8=F9:l9=F10:\
:la=F11:le=^H:mb=\EG2:mk@:nd=^L:sf=^J:sr=\Ej:st=\E1:ta=^I:\
:ts=\Ef:up=^K:vb=\Eb\Ed:ve=\E.3:vi=\E.0:vs=\E.1:tc=adm+sgr:
# TVI925 DIP switches. In each of these, D = Down and U = Up,
#
# Here are the settings for the external (baud) switches (S1):
#
# Position Baud
# 7 8 9 10 [Printer]
# 1 2 3 4 [Main RS232]
# -----------------------------------------------------
# D D D D 9600
# D D D U 50
# D D U D 75
# D D U U 110
# D U D D 135
# D U D U 150
# D U U D 300
# D U U U 600
# U D D D 1200
# U D D U 1800
# U D U D 2400
# U D U U 3600
# U U D D 4800
# U U D U 7200
# U U U D 9600
# U U U U 19200
#
#
# Settings for word length and stop-bits (S1)
#
# Position Description
# 5 6
# ---------------------------
# U - 7-bit word
# D - 8-bit word
# - U 2 stop bits
# - D 1 stop bit
#
#
# S2 (external) settings
#
# Position Up Dn Description
# --------------------------------------------
# 1 X Local edit
# X Duplex edit (transmit editing keys)
# --------------------------------------------
# 2 X 912/920 emulation
# X 925
# --------------------------------------------
# 3 X
# 4 X No parity
# 5 X
# --------------------------------------------
# 3 X
# 4 X Odd parity
# 5 X
# --------------------------------------------
# 3 X
# 4 X Even parity
# 5 X
# --------------------------------------------
# 3 X
# 4 X Mark parity
# 5 X
# --------------------------------------------
# 3 X
# 4 X Space parity
# 5 X
# --------------------------------------------
# 6 X White on black display
# X Black on white display
# --------------------------------------------
# 7 X Half Duplex
# 8 X
# --------------------------------------------
# 7 X Full Duplex
# 8 X
# --------------------------------------------
# 7 X Block mode
# 8 X
# --------------------------------------------
# 9 X 50 Hz
# X 60 Hz
# --------------------------------------------
# 10 X CR/LF (Auto LF)
# X CR only
#
# S3 (internal switch) settings:
#
# Position Up Dn Description
# --------------------------------------------
# 1 X Keyclick off
# X Keyclick on
# --------------------------------------------
# 2 X English
# 3 X
# --------------------------------------------
# 2 X German
# 3 X
# --------------------------------------------
# 2 X French
# 3 X
# --------------------------------------------
# 2 X Spanish
# 3 X
# --------------------------------------------
# 4 X Blinking block cursor
# 5 X
# --------------------------------------------
# 4 X Blinking underline cursor
# 5 X
# --------------------------------------------
# 4 X Steady block cursor
# 5 X
# --------------------------------------------
# 4 X Steady underline cursor
# 5 X
# --------------------------------------------
# 6 X Screen blanking timer (ON)
# X Screen blanking timer (OFF)
# --------------------------------------------
# 7 X Page attributes
# X Line attributes
# --------------------------------------------
# 8 X DCD disconnected
# X DCD connected
# --------------------------------------------
# 9 X DSR disconnected
# X DSR connected
# --------------------------------------------
# 10 X DTR Disconnected
# X DTR connected
# --------------------------------------------
#
# (tvi925: BSD has :cl=\E*:. I got :is: and :sr: from there -- esr)
tvi925|televideo 925:\
:am:bs:bw:hs:ul:\
:co#80:li#24:sg#1:\
:al=\EE:bl=^G:bt=\EI:cd=\EY:ce=\ET:cl=^Z:cm=\E=%+ %+ :cr=^M:\
:ct=\E3:dc=\EW:dl=\ER:do=^V:ds=\Eh:ei=:fs=^M\Eg:ho=^^:ic=\EQ:\
:im=:is=\El\E":k0=^AI\r:k1=^A@\r:k2=^AA\r:k3=^AB\r:\
:k4=^AC\r:k5=^AD\r:k6=^AE\r:k7=^AF\r:k8=^AG\r:k9=^AH\r:\
:kA=\EE:kC=^Z:kD=\EW:kE=\ET:kI=\EQ:kL=\ER:kS=\EY:kb=^H:kd=^V:\
:kh=^^:kl=^H:kr=^L:ku=^K:le=^H:mk@:nd=^L:sf=^J:sr=\Ej:st=\E1:\
:ta=^I:ts=\Eh\Ef:up=^K:vb=\Eb\Ed:ve=\E.4:vs=\E.2:\
:tc=adm+sgr:
# TeleVideo 925 from Mitch Bradley <sun!wmb> via BRL
# to avoid "magic cookie" standout glitch:
tvi925-hi|TeleVideo Model 925 with half intensity standout mode:\
:sg@:\
:kb=^H:kd=^J:kl=^H:se=\E(:so=\E):tc=tvi925:
# From: Todd Litwin <litwin@litwin.jpl.nasa.gov> 28 May 1993
# Originally Tim Curry, Univ. of Central Fla., <duke!ucf-cs!tim> 5/21/82
# for additional capabilities,
# The following tvi descriptions from B:pjphar and virus!mike
# is for all 950s. It sets the following attributes:
# full duplex (\EDF) write protect off (\E()
# conversation mode (\EC) graphics mode off (\E%)
# white on black (\Ed) auto page flip off (\Ew)
# turn off status line (\Eg) clear status line (\Ef\r)
# normal video (\E0) monitor mode off (\EX or \Eu)
# edit mode (\Er) load blank char to space (\Ee\040)
# line edit mode (\EO) enable buffer control (^O)
# protect mode off (\E\047) duplex edit keys (\El)
# program unshifted send key to send line all (\E016)
# program shifted send key to send line unprotected (\E004)
# set the following to nulls:
# field delimiter (\Ex0\200\200)
# line delimiter (\Ex1\200\200)
# start-protected field delimiter (\Ex2\200\200)
# end-protected field delimiter (\Ex3\200\200)
# set end of text delimiter to carriage return/null (\Ex4\r\200)
#
# TVI 950 Switch Setting Reference Charts
#
# TABLE 1:
#
# S1 1 2 3 4 5 6 7 8 9 10
# +-----------------------+-----+-----+-----------------------+
# | Computer Baud Rate |Data |Stop | Printer Baud Rate |
# | |Bits |Bits | |
# +------+-----------------------+-----+-----+-----------------------+
# | Up | See | 7 | 2 | See |
# +------+-----------------------+-----+-----+-----------------------+
# | Down | TABLE 2 | 8 | 1 | TABLE 2 |
# +------+-----------------------+-----+-----+-----------------------+
#
#
# S2 1 2 3 4 5 6 7 8 9 10
# +-----+-----+-----------------+-----+-----------+-----+-----+
# |Edit |Cursr| Parity |Video|Transmiss'n| Hz |Click|
# +------+-----+-----+-----------------+-----+-----------+-----+-----+
# | Up | Dplx|Blink| See |GonBk| See | 60 | Off |
# +------+-----+-----+-----------------+-----+-----------+-----+-----+
# | Down |Local|St'dy| TABLE 3 |BkonG| CHART | 50 | On |
# +------+-----+-----+-----------------+-----+-----------+-----+-----+
#
# TABLE 2:
#
# +-----------+-----+-----+-----+-----+-----------+
# | Display | 1 | 2 | 3 | 4 | Baud |
# +-----------+-----+-----+-----+-----+ |
# | Printer | 7 | 8 | 9 | 10 | Rate |
# +-----------+-----+-----+-----+-----+-----------+
# | D | D | D | D | 9600 |
# | U | D | D | D | 50 |
# | D | U | D | D | 75 |
# | U | U | D | D | 110 |
# | D | D | U | D | 135 |
# | U | D | U | D | 150 |
# | D | U | U | D | 300 |
# | U | U | U | D | 600 |
# | D | D | D | U | 1200 |
# | U | D | D | U | 1800 |
# | D | U | D | U | 2400 |
# | U | U | D | U | 3600 |
# | D | D | U | U | 4800 |
# | U | D | U | U | 7200 |
# | D | U | U | U | 9600 |
# | U | U | U | U | 19200 |
# +-----+-----+-----+-----+-----------+
#
# TABLE 3:
# +-----+-----+-----+-----------+
# | 3 | 4 | 5 | Parity |
# +-----+-----+-----+-----------+
# | X | X | D | None |
# | D | D | U | Odd |
# | D | U | U | Even |
# | U | D | U | Mark |
# | U | U | U | Space |
# +-----+-----+-----+-----------+
# X = don't care
#
# CHART:
# +-----+-----+-----------------+
# | 7 | 8 | Communication |
# +-----+-----+-----------------+
# | D | D | Half Duplex |
# | D | U | Full Duplex |
# | U | D | Block |
# | U | U | Local |
# +-----+-----+-----------------+
#
# (tvi950: early versions had obsolete ":ma=^Vj^Kk^Hh^Ll^^H:".
# I also inserted :ic: and :kI:; the :ko: string indicated that :IC:
# should be present and all tvi native modes use the same string for this.
# Finally, note that BSD has cud1=^V. -- esr)
tvi950|televideo 950:\
:am:bs:hs:mi:ms:xn:xo:\
:co#80:it#8:li#24:sg#1:\
:ac=b\011c\014d\re\ni\013:ae=^X:al=\EE:as=^U:bl=^G:bt=\EI:\
:cd=\Ey:ce=\Et:cl=\E*:cm=\E=%+ %+ :cr=^M:ct=\E3:dc=\EW:\
:dl=\ER:do=^J:ds=\Eg\Ef\r:ei=\Er:fs=^M:ho=^^:ic=\EQ:im=\Eq:\
:is=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\200\200\Ex1\200\200\Ex2\200\200\011\Ex3\200\200\Ex4\r\200\Ef\r:\
:k0=^A0\r:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:\
:k6=^AE\r:k7=^AF\r:k8=^AG\r:k9=^AH\r:kA=\EE:kB=\EI:kC=\E*:\
:kD=\EW:kE=\Et:kI=\EQ:kL=\ER:kS=\Ey:kb=^H:kd=^V:kh=^^:kl=^H:\
:kr=^L:ku=^K:le=^H:mk@:nd=^L:pf=\Ea:po=\E`:sf=^J:sr=\Ej:\
:st=\E1:ta=^I:ts=\Eg\Ef:up=^K:vb=\Eb\Ed:tc=adm+sgr:
#
# is for 950 with two pages adds the following:
# set 48 line page (\E\\2)
# place cursor at page 0, line 24, column 1 (\E-07 )
# set local (no send) edit keys (\Ek)
#
# two page 950 adds the following:
# when entering ex, set 24 line page (\E\\1)
# when exiting ex, reset 48 line page (\E\\2)
# place cursor at 0,24,1 (\E-07 )
# set duplex (send) edit keys (\El) when entering vi
# set local (no send) edit keys (\Ek) when exiting vi
#
tvi950-2p|televideo950 w/2 pages:\
:is=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\200\200\Ex1\200\200\Ex2\200\200\011\Ex3\200\200\Ex4\r\200\E\\2\E-07 \011:\
:ke=\Ek:ks=\El:te=\E\\2\E-07\040:ti=\E\\1\E-07\040:\
:tc=tvi950:
#
# is for 950 with four pages adds the following:
# set 96 line page (\E\\3)
# place cursor at page 0, line 24, column 1 (\E-07 )
#
# four page 950 adds the following:
# when entering ex, set 24 line page (\E\\1)
# when exiting ex, reset 96 line page (\E\\3)
# place cursor at 0,24,1 (\E-07 )
#
tvi950-4p|televideo950 w/4 pages:\
:is=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\200\200\Ex1\200\200\Ex2\200\200\011\Ex3\200\200\Ex4\r\200\E\\3\E-07 \011:\
:ke=\Ek:ks=\El:te=\E\\3\E-07\040:ti=\E\\1\E-07\040:\
:tc=tvi950:
#
# :is: for reverse video 950 changes the following:
# set reverse video (\Ed)
#
# set vb accordingly (\Ed ...delay... \Eb)
#
tvi950-rv|televideo950 rev video:\
:is=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\200\200\Ex1\200\200\Ex2\200\200\011\Ex3\200\200\Ex4\r\200:\
:vb=\Ed\Eb:tc=tvi950:
# tvi950-rv-2p uses the appropriate entries from 950-2p and 950-rv
tvi950-rv-2p|televideo950 rev video w/2 pages:\
:is=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\200\200\Ex1\200\200\Ex2\200\200\011\Ex3\200\200\Ex4\r\200\E\\2\E-07\040:\
:ke=\Ek:ks=\El:te=\E\\2\E-07\040:ti=\E\\1\E-07\040:\
:vb=\Ed\Eb:tc=tvi950:
# tvi950-rv uses the appropriate entries from 950-4p and 950-rv
tvi950-rv-4p|televideo950 rev video w/4 pages:\
:is=\EDF\EC\Eb\EG0\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\200\200\Ex1\200\200\Ex2\200\200\011\Ex3\200\200\Ex4\r\200\E\\3\E-07\040:\
:ke=\Ek:ks=\El:te=\E\\3\E-07\040:ti=\E\\1\E-07\040:\
:vb=\Ed\Eb:tc=tvi950:
# From: Andreas Stolcke <stolcke@icsi.berkeley.edu>
# (tvi955: removed obsolete ":ma:=^Vj^Kk^Hh^Ll^^H";
# removed incorrect (and overridden) ":do=^J:"; fixed broken continuations in
# the :rs: string, inserted the :IC: implied by the termcap :ko: string. Note
# the :ko: string had :cl: in it, which means that one of the original
# :cl=\E*:, <kclr=\EY> had to be wrong; set <kclr=\E*> because that's what
# the 950 has. Finally, corrected the <kel> string to match the 950 and what
# ko implies -- esr)
# If the BSD termcap file was right, :cm=\E=%p1%{32}%+%c%p2%{32}%+%c: would
# also work.
tvi955|televideo 955:\
:5i:bs:ms@:\
:it#8:sg@:\
:RA=\E[=7l:RX=^N:SA=\E[=7h:SX=^O:\
:ac=0_`RjHkGlFmEnIoPqKsQtMuLvOwNxJ:ae=\E%%:as=\E$:\
:cm=\E[%i%d;%dH:do=^V:is=\E[=3l\EF1\Ed\EG0\E[=5l\E%\El:\
:kM=\EQ:kN=\EK:kP=\EJ:kT=\E1:ka=\E3:kt=\E2:mb=\EG2:\
:me=\EG0\E[=5l:mh=\E[=5h:mk=\EG1:ps=\EP:\
:r1=\EDF\EC\Eg\Er\EO\E'\E(\Ew\EX\Ee \017\E0P\E6\200\E0p\E4\200\Ef\r:\
:sf@:ve=\E.2:vi=\E.0:vs=\E.1:tc=tvi950:
tvi955-w|955-w|televideo955 w/132 cols:\
:co#132:\
:is=\E[=3h\EF1\Ed\EG0\E[=5l\E%\El:tc=tvi955:
# use half-intensity as normal mode, full intensity as :md:
tvi955-hb|955-hb|televideo955 half-bright:\
:is=\E[=3l\EF1\Ed\EG0\E[=5h\E%\El:md=\E[=5l:\
:me=\EG0\E[=5h:mh@:tc=tvi955:
# From: Humberto Appleton <beto@cs.utexas.edu>, 880521 UT Austin
# (tvi970: removed ":sg#0:"; removed :se:=\E[m, :ue:=\E[m;
# added :am:/:cs:/:ho:/<hpa>/<vpa>/:ti:/:te: from BRL.
# According to BRL we could have :ke:=\E>, :ks:=\E= but I'm not sure what
# it does to the function keys. I deduced <rmam>/<smam>.
# also added empty <acsc> to suppress tic warning, -- esr)
tvi970|televideo 970:\
:am:bs:da:db:mi:ms:pt:\
:co#80:it#8:li#24:\
:RA=\E[?7h:SA=\E[?7l:ac=:ae=\E(B:al=\E[L:as=\E(B:bt=\E[Z:\
:cd=\E[J:ce=\E[K:ch=\E[%i%dG:cl=\E[H\E[2J:cm=\E[%i%d;%df:\
:cs=\E[%i%d;%dr:cv=\E[%i%dd:dc=\E[P:dl=\E[M:do=\ED:\
:ds=\Eg\Ef\r:ei=\E[4l:ho=\E[H:im=\E[4h:\
:is=\E<\E[?21l\E[19h\E[1Q\E[10l\E[7l\E[H\E[2J:k1=\E?a:\
:k2=\E?b:k3=\E?c:k4=\E?d:k5=\E?e:k6=\E?f:k7=\E?g:k8=\E?h:\
:k9=\E?i:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:\
:le=^H:me=\E[m:nd=\E[C:se=\E[m:so=\E[7m:sr=\EM:ta=^I:te=:\
:ti=\E[?20l\E[?7h\E[1Q:ue=\E[m:up=\EM:us=\E[4m:\
:vb=\E[5m\E[m:vs=\E[1Q:
tvi970-vb|televideo 970 with visual bell:\
:vb=\E[?5h\200\200\200\200\200\200\200\200\200\200\200\200\200\E[?5l:\
:tc=tvi970:
tvi970-2p|televideo 970 with using 2 pages of memory:\
:te=\E[H\E[J\E[V:ti=\E[U\E[?20l\E[?7h\E[1Q:tc=tvi970:
# Works with vi and rogue. NOTE: Esc v sets autowrap on, Esc u sets 80 chars
# per line (rather than 40), Esc K chooses the normal character set. Not sure
# padding is needed, but adapted from the tvi920c termcap. The :so: and
# :us: strings are klutzy, but at least use no screen space.
# (tvipt: removed obsolete ":ma=^Kk^Ll^R^L:". I wish we knew <rmam>,
# its absence means <smam>=\Ev isn't safe to use. -- esr)
# From: Gene Rochlin <armsis@amber.berkeley.edu> 9/19/84.
# The :cd:/:k0:/:k1:/:kh:/<mc4>, and <mc5> caps are from BRL, which says:
# F1 and F2 should be programmed as ^A and ^B; required for UNIFY.
tvipt|televideo personal terminal:\
:am:bs:\
:co#80:li#24:\
:al=5*\EE:bt=\EI:cd=\EY:ce=\ET:cl=^Z:cm=\E=%+ %+ :dl=5*\ER:\
:ho=^^:if=/usr/share/tabset/stdcrt:is=\Ev\Eu\EK:k0=^A:\
:k1=^B:kb=^H:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:le=^H:nd=^L:pf=^T:\
:po=^R:se=\EF:so=\EG1@A\EH:ue=\EF:up=^K:us=\EG1B@\EH:
# From: Nathan Peterson <nathan@sco.com>, 03 Sep 1996
# (sgr removed to fit entry within 1023 bytes)
# (rmacs/smacs removed for consistency)
# (acsc removed to fit entry within 1023 bytes)
# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
tvi9065|televideo 9065:\
:am:bw:hs:mi:ms:xn:xo:\
:co#80:it#8:li#25:lm#0:ma#4:vt#0:ws#30:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
:LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:al=\EE:\
:bl=^G:bt=\EI:cd=\EY:ce=\ET:cl=^Z:cm=\E=%+ %+ :cr=^M:\
:cs=\E[%i%d;%dr:ct=\E3:dc=\EW:dl=\ER:dm=\Er:do=^V:\
:ds=\E_30\r:ec=\E[%d@:ed=\200:ei=\Er:fs=^M:ho=^^:\
:i1=\E"\E%\E'\E(\EG@\EO\EX\E[=5l\E[=6l\E[=7h\Ed\Er:\
:i2=\E<\E[=4l\E[=8h:if=/usr/share/tabset/stdcrt:im=\Eq:\
:ip=3:is=\EF2\EG0\E\\L:k1=^A@\r:k2=^AA\r:k3=^AB\r:\
:k4=^AC\r:k5=^AD\r:k6=^AE\r:k7=^AF\r:k8=^AG\r:k9=^AH\r:\
:kD=\EW:kb=^H:kd=^V:kh=^^:kl=^H:kr=^L:ku=^K:le=^H:\
:ll=\E[25;1H:mb=\EG2:md=\EG,:me=\EG0\E%:mh=\EGp:mr=\EG4:\
:nd=^L:nw=^M^J:rp=\E[%r%db%.:se=\EG0:sf=^J:so=\EGt:sr=\Ej:\
:st=\E1:ta=^I:te=\E.3\Er\E[1;25r\E[25;0H:ti=\E.2:\
:ts=\E[4;1v\E_30:uc=\EG8\EG0:ue=\EG0:up=^K:us=\EG8:\
:vb=\Eb\Ed:ve=\E.3:vi=\E.0:vs=\E.2:
#### Visual (vi)
#
# In September 1993, Visual Technology of Westboro, Massachusetts,
# merged with White Pine Software of Nashua, New Hampshire.
#
# White Pine Software may be contacted at +1 603/886-9050.
# Or visit White Pine on the World Wide Web at URL http://www.wpine.com.
#
# Visual 50 from Beau Shekita, BTL-Whippany <whuxlb!ejs>
# Recently I hacked together the following termcap for Visual
# Technology's Visual 50 terminal. It's a slight modification of
# the vt52 termcap.
# It's intended to run when the Visual 50 is in vt52 emulation mode
# (I know what you're thinking; if it's emulating a vt52, then why
# another termcap? Well, it turns out that the Visual 50 can handle
# :dl: and db(?) among other things, which the vt52 can't)
# The termcap works OK for the most part. The only problem is on
# character inserts. The whole line gets painfully redrawn for each
# character typed. Any suggestions?
# Beau's entry is combined with the vi50 entry from University of Wisconsin.
# Note especially the :al: function. :k4:-:k6: are really l4-l6 in
# disguise; :k7:-:k9: are really l1-l3.
vi50|visual 50:\
:am:bs:da:db:ms:pt:\
:co#80:it#8:li#24:\
:al=\EL:bl=^G:bt=4\Ez:cd=\EJ:ce=16\EK:cl=\EH\EJ:\
:cm=\EY%+ %+ :cr=^M:dl=3*\EM:do=\EB:ho=\EH:k1=\EP:k2=\EQ:\
:k3=\ER:k4=\EV:k5=\EE:k6=\E]:k7=\EL:k8=\Ev:k9=\EM:kb=^H:\
:kd=\EB:kh=\EH:kl=\ED:kr=\EC:ku=\EA:le=^H:nd=\EC:nl=^J:\
:nw=^M^J:se=\ET:sf=^J:so=\EU:sr=\EI:ta=^I:ue=\EW:up=\EA:\
:us=\ES:
# this one was BSD & SCO's vi50
vi50adm|visual 50 in adm3a mode:\
:am:ms:\
:co#80:it#8:li#24:\
:al=\EL:bl=^G:cd=\Ek:ce=\EK:cl=^Z:cm=\E=%+ %+ :cr=^M:dl=\EM:\
:do=^J:ho=\EH:kb=^H:kd=\EB:kh=\EH:kl=\ED:kr=\EC:ku=\EA:le=^H:\
:nd=^L:se=\ET:sf=^J:so=\EU:ta=^I:up=^K:
# From: Jeff Siegal <jbs@quiotix.com>
vi55|Visual 55:\
:am:bs:mi:ms:\
:co#80:it#8:li#24:\
:al=\EL:cd=\EJ:ce=\EK:cl=\Ev:cm=\EY%+ %+ :cs=\E_%+A%+A:\
:dc=\Ew:dl=\EM:do=^J:ei=\Eb:ho=\EH:im=\Ea:\
:is=\Ev\E_AX\Eb\EW\E9P\ET:kb=^H:kd=\EB:kl=\ED:kr=\EC:\
:ku=\EA:le=^H:nd=\EC:se=\ET:so=\EU:sr=\EI:ta=^I:up=\EA:
# Visual 200 from BRL
# The following switch settings are assumed for normal operation:
# FULL_DUPLEX SCROLL CR
# AUTO_NEW_LINE_ON VISUAL_200_EMULATION_MODE
# Other switches may be set for operator convenience or communication
# requirements.
# Character insertion is kludged in order to get around the "beep" misfeature.
# (This cap is commented out because :im:/:ei: is more efficient -- esr)
# Supposedly "4*" delays should be used for :al:, :cd:, :cl:, :dc:,
# and :dl: strings, but we seem to get along fine without them.
vi200|visual 200:\
:am:bs:mi:ms:pt:\
:co#80:it#8:kn#10:li#24:\
:ac=:ae=\EG:al=\EL:as=\EF:bl=^G:bt=\Ez:cd=\Ey:ce=\Ex:cl=\Ev:\
:cm=\EY%+ %+ :cr=^M:ct=\Eg:dc=\EO:dl=\EM:do=^J:ho=\EH:\
:k0=\E?p:k1=\E?q:k2=\E?r:k3=\E?s:k4=\E?t:k5=\E?u:k6=\E?v:\
:k7=\E?w:k8=\E?x:k9=\E?y:kA=\EL:kC=\Ev:kD=\EO:kE=\Et:kI=\Ei:\
:kL=\EM:kM=\Ej:kS=\EJ:kT=\E1:kb=^H:kd=\EB:ke=\E>:kh=\EH:\
:kl=\ED:kr=\EC:ks=\E=:kt=\E2:ku=\EA:le=^H:me=\E3\Eb:mh=\E4:\
:mk=\Ea:nd=\EC:pf=\EX:po=\EW:ps=\EH\E]:\
:r1=\E3\Eb\Ej\E\El\EG\Ec\Ek\EX:se=\E3:sf=^J:so=\E4:\
:sr=\EI:st=\E1:ta=^I:up=\EA:ve=\Ec:vs=\Ed:
# The older Visuals didn't come with function keys. This entry uses
# :ks: and :ke: so that the keypad keys can be used as function keys.
# If your version of vi doesn't support function keys you may want
# to use vi200-f.
vi200-f|visual 200 no function keys:\
:is=\E3\Eb\Ej\E\\\El\EG\Ed\Ek:k0=\E?p:k1=\E?q:k2=\E?r:\
:k3=\E?s:k4=\E?t:k5=\E?u:k6=\E?v:k7=\E?w:k8=\E?x:k9=\E?y:\
:ke=\E>:ks=\E=:se@:so@:tc=vi200:
vi200-rv|visual 200 reverse video:\
:se=\E3:so=\E4:sr@:ve@:vs@:tc=vi200:
# the function keys are programmable but we don't reprogram them to their
# default values with :is: because programming them is very verbose. maybe
# an initialization file should be made for the 300 and they could be stuck
# in it.
# (vi300: added <rmam>/<smam> based on init string -- esr)
vi300|visual 300 ansi x3.64:\
:am:bw:mi:xn:\
:co#80:li#24:\
:RA=\E[?7l:SA=\E[?7h:al=\E[L:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:\
:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:dc=40\E[P:dl=\E[M:\
:do=\E[B:ei=\E[4l:ho=\E[H:im=\E[4h:\
:is=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[1Q\E[0;1(D\E[8s:\
:k1=\E_A\E\\:k2=\E_B\E\\:k3=\E_C\E\\:k4=\E_D\E\\:\
:k5=\E_E\E\\:k6=\E_F\E\\:k7=\E_G\E\\:k8=\E_H\E\\:\
:k9=\E_I\E\\:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:\
:me=\E[m:nd=\E[C:se=\E[m:sf=^J:so=\E[1m:sr=\EM:ta=^I:\
:ue=\E[m:up=\E[A:us=\E[4m:
# some of the vi300s have older firmware that has the command
# sequence for setting editing extent reversed.
vi300-old|visual 300 with old firmware (set edit extent reversed):\
:is=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[2Q\E[0;1(D\E[8s:\
:tc=vi300:
# Visual 500 prototype entry from University of Wisconsin.
# The best place to look for the escape sequences is page A1-1 of the
# Visual 500 manual. The initialization sequence given here may be
# overkill, but it does leave out some of the initializations which can
# be done with the menus in set-up mode.
# The :xp: line below is so that emacs can understand the padding requirements
# of this slow terminal. :xp: is 10 time the padding factor.
# (vi500: removed unknown :xp#4: termcap;
# also added empty <acsc> to suppress tic warning -- esr)
vi500|visual 500:\
:am:mi:ms:\
:co#80:it#8:li#33:\
:ac=:ae=^O:al=3*\EL\Ex:as=^N:bt=4\Ez:cd=3*\Ey:ce=16\Ex:\
:cl=6*\Ev:cm=\EY%+ %+ :cr=^M:cs=\E(%+ %+ :dc=3*\EO:\
:dl=3*\EM:do=\EB:ei=\Ej:ho=\EH:im=\Ei:\
:is=\E3\E\001\E\007\E\003\Ek\EG\Ed\EX\El\E>\Eb\E\\:\
:kb=^H:kd=\EB:kh=\EH:kl=\ED:kr=\EC:ku=\EA:le=^H:nd=\EC:\
:nw=^M^J:se=\E^G:sf=^J:so=\E^H:ta=8\011:ue=\E^C:up=\EA:\
:us=\E^D:
# The visual 550 is a visual 300 with tektronix graphics,
# and with 33 lines. clear screen is modified here to
# also clear the graphics.
vi550|visual 550 ansi x3.64:\
:li#33:\
:cl=\030\E[H\E[2J:tc=vi300:
vi603|visual603|visual 603:\
:hs:mi:\
:al=\E[L:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:\
:cs=\E[%i%d;%dr:dc=\E[P:dl=\E[M:ds=\EP2;1~\E\\:ei=\E[4l:\
:fs=\E\\:i1=\E>\E[?3l\E[?4l\E[?7h\E[?8h\E[1;24r:\
:im=\E[4h:mb=\E[5m:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:\
:se=\E[27m:sf=\ED:so=\E[7m:sr=\EM:ts=\EP2~:ue=\E[24m:\
:up=\E[A:us=\E[4m:tc=vt100:
#### Wyse (wy)
#
# Wyse Technology
# 3471 North First Street
# San Jose, CA 95134
# Vox: (408)-473-1200
# Fax: (408) 473-1222
# Web: http://www.wyse.com
#
# Wyse sales can be reached by phone at 1-800-GET-WYSE. Tech support is at
# (800)-800-WYSE (option 5 gets you a human). There's a Web page at the
# obvious address, <http://www.wyse.com>. They keep terminfo entries at
# <http://www.wyse.co.uk/support/appnotes/idxappnt.htm>.
#
# Wyse bought out Link Technology, Inc. in 1990 and closed it down in 1995.
# They now own the Qume and Amdek brands, too. So these are the people to
# talk with about all Link, Qume, and Amdek terminals.
#
# These entries include a few small fixes.
# I canceled the bel capacities in the vb entries.
# I made two trivial syntax fixes in the wyse30 entry.
# I made some entries relative to adm+sgr.
#
#
# Note: The wyse75, wyse85, and wyse99 have been discontinued.
# Although the Wyse 30 can support more than one attribute
# it requires magic cookies to do so. Many applications do not
# function well with magic cookies. The following terminfo uses
# the protect mode to support one attribute (dim) without cookies.
# If more than one attribute is needed then the wy30-mc terminfo
# should be used.
#
wy30|wyse30|Wyse 30:\
:5i:am:bw:hs:mi:ms:xo:\
:Nl#8:co#80:lh#1:li#24:lw#8:ma#1:ws#45:\
:#2=\E{:&3=\Er:@8=\E7:LF=\EA11:LO=\EA10:\
:ac=0wa_h[jukslrmqnxqzttuyv]wpxv:ae=\EH^C:al=2\EE:\
:as=\EH^B:bl=^G:bt=\EI:cd=80\EY:ce=\ET:cl=80\E+:\
:cm=\E=%+ %+ :cr=^M:ct=\E0:dc=10\EW:dl=1\ER:do=^J:ds=\EF\r:\
:ei=\Er:fs=^M:ho=^^:im=\Eq:ip=2:\
:is=\E'\E(\E\1363\E`9\016\024:k1=^A@\r:k2=^AA\r:\
:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:k7=^AF\r:k8=^AG\r:\
:kA=\EE:kB=\EI:kD=\EW:kE=\ET:kI=\EQ:kL=\ER:kN=\EK:kP=\EJ:\
:kS=\EY:kb=^H:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:le=^H:ll=^^^K:\
:me=\E(:mh=\E`7\E):mp=\E`7\E):nd=^L:nw=^M^J:pf=^T:po=^X:\
:ps=\EP:se=\E(:sf=2\n:so=\E`7\E):sr=3\Ej:st=\E1:ta=1\011:\
:ts=\EF:up=^K:vb=\E`8\E`9:ve=\E`1:vi=\E`0:
#
# This terminal description uses the non-hidden attribute mode
# (with magic cookie).
#
# (wy30-mc: added :ti: to suppress tic warning --esr)
wy30-mc|wyse30-mc|wyse 30 with magic cookies:\
:ms@:\
:ma@:sg#1:\
:ae=\EG0\EH\003:as=\EG0\EH\002:mb=\EG2:\
:me=\EG0\E(\EH\003:mh=\EGp:mp=\EG0\E):se=\EG0:so=\EG4:\
:te=\EG0:ti=:tc=wy30:tc=adm+sgr:
# The mandatory pause used by :vb: does not work with
# older versions of terminfo. If you see this effect then
# unset xon and delete the / from the delay.
# i.e. change $<100/> to $<100>
wy30-vb|wyse30-vb|wyse 30 visible bell:\
:bl@:tc=wy30:
#
# The Wyse 50 can support one attribute (e.g. Dim, Inverse,
# Normal) without magic cookies by using the protect mode.
# The following description uses this feature, but when more
# than one attribute is put on the screen at once, all attributes
# will be changed to be the same as the last attribute given.
# The Wyse 50 can support more attributes when used with magic
# cookies. The wy50-mc terminal description uses magic cookies
# to correctly handle multiple attributes on a screen.
#
wy50|wyse50|Wyse 50:\
:5i:am:bw:hs:mi:ms:xo:\
:Nl#8:co#80:lh#1:li#24:lw#8:ma#1:ws#45:\
:#2=\E{:%9=\EP:&3=\Er:@8=\E7:F1=^AJ\r:F2=^AK\r:F3=^AL\r:\
:F4=^AM\r:F5=^AN\r:F6=^AO\r:LF=\EA11:LO=\EA10:\
:ac=0wa_h[jukslrmqnxqzttuyv]wpxv:ae=\EH^C:al=\EE:\
:as=\EH^B:bl=^G:bt=\EI:cd=20\EY:ce=\ET:cl=20\E+:\
:cm=\E=%+ %+ :cr=^M:ct=\E0:dc=1\EW:dl=\ER:do=^J:ds=\EF\r:\
:ei=\Er:fs=^M:ho=^^:i1=30\E`\072\E`9:im=\Eq:ip=1:\
:is=\016\024\E'\E(:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:\
:k5=^AD\r:k6=^AE\r:k7=^AF\r:k8=^AG\r:k9=^AH\r:k;=^AI\r:\
:kA=\EE:kB=\EI:kD=\EW:kE=\ET:kI=\EQ:kL=\ER:kN=\EK:kP=\EJ:\
:kS=\EY:kb=^H:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:le=^H:ll=^^^K:\
:me=\E(:mh=\E`7\E):mp=\E`7\E):mr=\E`6\E):nd=^L:nw=^M^J:\
:pf=^T:po=^X:ps=\EP:se=\E(:sf=2\n:so=\E`6\E):sr=\Ej:st=\E1:\
:ta=^I:ts=\EF:up=^K:vb=\E`8\E`9:ve=\E`1:vi=\E`0:
#
# This terminal description uses the non-hidden attribute mode
# (with magic cookie).
#
# The mandatory pause used by flash does not work with some
# older versions of terminfo. If you see this effect then
# unset :xo: and delete the / from the delay.
# i.e. change $<100/> to $<100>
# (wy50-mc: added :ti: to suppress tic warning --esr)
wy50-mc|wyse50-mc|wyse 50 with magic cookies:\
:ms@:\
:ma@:sg#1:\
:ae=\EG0\EH\003:as=\EG0\EH\002:mb=\EG2:\
:me=\EG0\E(\EH\003:mh=\EGp:mp=\EG0\E):mr=\EG4:se=\EG0:\
:so=\EGt:te=\EG0:ti=:tc=wy50:tc=adm+sgr:
wy50-vb|wyse50-vb|wyse 50 visible bell:\
:bl@:tc=wy50:
wy50-w|wyse50-w|wyse 50 132-column:\
:Nl#16:co#132:lw#7:ws#97:\
:cm=\Ea%i%dR%dC:dc=2\EW:i1=30\E`;\E`9:tc=wy50:
wy50-wvb|wyse50-wvb|wyse 50 132-column visible bell:\
:bl@:tc=wy50-w:
#
# The Wyse 350 is a Wyse 50 with color.
# Unfortunately this means that it has magic cookies.
# The color attributes are designed to overlap the reverse, dim and
# underline attributes. This is nice for monochrome applications
# because you can make underline stuff green (or any other color)
# but for true color applications it's not so hot because you cannot
# mix color with reverse, dim or underline.
# To further complicate things one of the attributes must be
# black (either the foreground or the background). In reverse video
# the background changes color with black letters. In normal video
# the foreground changes colors on a black background.
# This terminfo uses some of the more advanced features of curses
# to display both color and blink. In the final analysis I am not
# sure that the wy350 runs better with this terminfo than it does
# with the wy50 terminfo (with user adjusted colors).
#
# The mandatory pause used by flash does not work with
# older versions of terminfo. If you see this effect then
# unset xon and delete the / from the delay.
# i.e. change $<100/> to $<100>
#
# Bug: The <op> capability resets attributes.
wy350|wyse350|Wyse 350:\
:5i:am:bw:hs:mi:xo:\
:Co#8:NC#55:Nl#8:co#80:lh#1:li#24:lw#8:pa#8:sg#1:ws#45:\
:#2=\E{:%9=\EP:&3=\Er:@8=\E7:F1=^AJ\r:F2=^AK\r:F3=^AL\r:\
:F4=^AM\r:F5=^AN\r:F6=^AO\r:LF=\EA11:LO=\EA10:Sb=:\
:ac=0wa_h[jukslrmqnxqzttuyv]wpxv:ae=\EG0\EH\003:al=\EE:\
:as=\EG0\EH\002:bl=^G:bt=\EI:cd=20\EY:ce=\ET:cl=20\E+:\
:cm=\E=%+ %+ :cr=^M:ct=\E0:dc=1\EW:dl=\ER:do=^J:ds=\EF\r:\
:ei=\Er:fs=^M:ho=^^:i1=30\E`\072\E`9:i2=\E%?:im=\Eq:ip=1:\
:is=\016\024\E'\E(:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:\
:k5=^AD\r:k6=^AE\r:k7=^AF\r:k8=^AG\r:k9=^AH\r:k;=^AI\r:\
:kA=\EE:kB=\EI:kD=\EW:kE=\ET:kI=\EQ:kL=\ER:kN=\EK:kP=\EJ:\
:kS=\EY:kb=^H:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:le=^H:ll=^^^K:\
:mb=\EG2:me=%{0}%PA%{0}%PC:mh=\EGp:mp=\EG0\E):nd=^L:\
:nw=^M^J:oc=\E%?:op=\EG0:pf=^T:po=^X:ps=\EP:sf=2\n:sr=\Ej:\
:st=\E1:ta=^I:ts=\EF:up=^K:vb=\E`8\E`9:ve=\E`1:vi=\E`0:\
:tc=adm+sgr:
wy350-vb|wyse350-vb|wyse 350 visible bell:\
:bl@:tc=wy350:
wy350-w|wyse350-w|wyse 350 132-column:\
:Nl#16:co#132:lw#7:ws#97:\
:cm=\Ea%i%dR%dC:dc=2\EW:i1=30\E`;\E`9:tc=wy350:
wy350-wvb|wyse350-wvb|wyse 350 132-column visible bell:\
:bl@:tc=wy350-w:
#
# This terminfo description is untested.
# The wyse100 emulates an adm31, so the adm31 entry should work.
#
wy100|wyse 100:\
:hs:mi:\
:co#80:li#24:sg#1:\
:al=\EE:bl=^G:cd=\EY:ce=\ET:cl=\E;:cm=\E=%+ %+ :cr=^M:\
:dc=\EW:dl=\ER:do=^J:ds=\EA31:ei=\Er:fs=^M:im=\Eq:is=\Eu\E0:\
:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
:k7=^AF\r:k8=^AG\r:kb=^H:kd=^J:kh=\E{:kl=^H:kr=^L:ku=^K:\
:le=^H:mk@:nd=^L:sf=^J:ts=\EF:up=^K:tc=adm+sgr:
#
# The Wyse 120/150 has most of the features of the Wyse 60.
# This terminal does not need padding up to 9600 baud!
# :ms: should be set but the clear screen fails when in
# alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
# then set :ms:.
#
# (sgr removed to fit entry within 1023 bytes)
# (rmacs/smacs removed for consistency)
# (acsc removed to fit entry within 1023 bytes)
wy120|wyse120|wy150|wyse150|Wyse 120/150:\
:5i:am:bw:hs:km:mi:ms:xo:\
:Nl#8:co#80:it#8:lh#1:li#24:lw#8:pb#9601:ws#45:\
:#2=\E{:%9=\EP:&3=\Er:@8=\E7:F1=^AJ\r:F2=^AK\r:F3=^AL\r:\
:F4=^AM\r:F5=^AN\r:F6=^AO\r:LF=\EA11:LO=\EA10:RA=\Ed.:\
:RX=\Ec20:SA=\Ed/:SX=\Ec21:al=3\EE:bl=^G:bt=\EI:cd=50\EY:\
:ce=4\ET:cl=50\E+:cm=\E=%+ %+ :cr=^M:ct=\E0:dc=7\EW:\
:dl=3\ER:do=^J:ds=\EF\r:ei=\Er:fs=^M:ho=^^:i1=\EcB0\EcC1:\
:i2=150\EwJ\Ew1:im=\Eq:ip=2:\
:is=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El:\
:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
:k7=^AF\r:k8=^AG\r:k9=^AH\r:k;=^AI\r:kA=\EE:kB=\EI:kD=\EW:\
:kE=\ET:kI=\EQ:kL=\ER:kN=\EK:kP=\EJ:kS=\EY:kb=^H:kd=^J:kh=^^:\
:kl=^H:kr=^L:ku=^K:le=^H:ll=^^^K:mb=\EG2:\
:me=\E(\EH\003\EG0\EcD:mh=\EGp:mp=\E):nd=^L:nw=3\r\n:\
:pf=^T:po=\Ed#:ps=\EP:r1=30\E~!\E~4:r2=70\EeF\E`\072:\
:r3=100\EwG\Ee(:sf=3\n:so=\EGt:sr=2\Ej:st=\E1:ta=1\011:\
:te=\Ew1:ti=\Ew0:ts=\EF:up=^K:vb=\E`8\E`9:ve=\E`1:vi=\E`0:\
:tc=adm+sgr:
#
wy120-w|wyse120-w|wy150-w|wyse150-w|wyse 120/150 132-column:\
:Nl#16:co#132:lw#7:ws#97:\
:cm=\Ea%i%dR%dC:dc=12\EW:ip=4:rs=70\E`;:tc=wy120:
#
wy120-25|wyse120-25|wy150-25|wyse150-25|wyse 120/150 80-column 25-lines:\
:Nl@:lh@:li#25:lw@:\
:pn@:r3=100\EwG\Ee):tc=wy120:
#
wy120-25-w|wyse120-25-w|wy150-25-w|wyse150-25-w|wyse 120/150 132-column 25-lines:\
:Nl@:lh@:li#25:lw@:\
:pn@:r3=100\EwG\Ee):tc=wy120-w:
#
wy120-vb|wyse120-vb|wy150-vb|wyse150-vb|Wyse 120/150 visible bell:\
:bl@:tc=wy120:
#
wy120-w-vb|wy120-wvb|wyse120-wvb|wy150-w-vb|wyse150-w-vb|Wyse 120/150 132-column visible bell:\
:bl@:tc=wy120-w:
#
# The Wyse 60 is like the Wyse 50 but with more padding.
# The reset strings are slow and the pad times very depending
# on other parameters such as font loading. I have tried
# to follow the following outline:
#
# <rs1> -> set personality
# <rs2> -> set number of columns
# <rs3> -> set number of lines
# :i1: -> select the proper font
# :is: -> do the initialization
# :i3: -> set up display memory (2 pages)
#
# The Wyse 60's that have vt100 emulation are slower than the
# older Wyse 60's. This change happened mid-1987.
# The capabilities effected are :dc: :dl: :al: :sf: :sr:
#
# The meta key is only half right. This terminal will return the
# high order bit set when you hit CTRL-function_key
#
# It may be useful to assign two function keys with the
# values \E=(\s look at old data in page 1
# \E=W, look at bottom of page 1
# where \s is a space ( ).
#
# Note:
# The Wyse 60 runs faster when the XON/XOFF
# handshake is turned off.
#
# (wy60: we use \E{ rather than ^^ for home (both are documented) to avoid
# a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
wy60|wyse60|Wyse 60:\
:5i:am:bw:hs:km:mi:ms:\
:Nl#8:co#80:lh#1:li#24:lw#8:ws#45:\
:#2=\E{:%9=\EP:&3=\Er:@8=\E7:DK=\E`b:F1=^AJ\r:F2=^AK\r:\
:F3=^AL\r:F4=^AM\r:F5=^AN\r:F6=^AO\r:LF=\EA11:LO=\EA10:\
:RA=\Ed.:RC=\E`c:RX=\Ec20:SA=\Ed/:SX=\Ec21:\
:ac=+/,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~:\
:ae=\EcD:al=4\EE:as=\EcE:bl=^G:bt=\EI:cd=100\EY:ce=\ET:\
:cl=100\E+:cm=\E=%+ %+ :cr=^M:ct=\E0:dc=11\EW:dl=5\ER:\
:do=^J:ds=\EF\r:ei=\Er:fs=^M:ho=\E{:i1=\EcB0\EcC1:\
:i2=150\EwJ\Ew1:im=\Eq:ip=3:\
:is=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El:\
:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
:k7=^AF\r:k8=^AG\r:k9=^AH\r:k;=^AI\r:kA=\EE:kB=\EI:kD=\EW:\
:kE=\ET:kI=\EQ:kL=\ER:kN=\EK:kP=\EJ:kS=\EY:kb=^H:kd=^J:kh=^^:\
:kl=^H:kr=^L:ku=^K:le=^H:ll=\E{^K:mb=\EG2:\
:me=\E(\EH\003\EG0\EcD:mh=\EGp:mp=\E):nd=^L:nw=3\r\n:\
:pf=^T:po=\Ed#:ps=\EP:r1=150\E~!\E~4:r2=150\EeG:\
:r3=200\EwG\Ee(:sf=5\n:so=\EGt:sr=7\Ej:st=\E1:ta=1\011:\
:te=\Ew1:ti=\Ew0:ts=\EF:up=^K:vb=\E`8\E`9:ve=\E`1:vi=\E`0:\
:tc=adm+sgr:
#
wy60-w|wyse60-w|wyse 60 132-column:\
:Nl#16:co#132:lw#7:ws#97:\
:cm=\Ea%i%dR%dC:dc=16\EW:ip=5:rs=150\EeF\E`;:tc=wy60:
#
wy60-25|wyse60-25|wyse 60 80-column 25-lines:\
:Nl@:lh@:li#25:lw@:\
:pn@:r3=200\EwG\Ee):tc=wy60:
wy60-25-w|wyse60-25-w|wyse 60 132-column 25-lines:\
:Nl@:lh@:li#25:lw@:\
:pn@:r3=200\EwG\Ee):tc=wy60-w:
#
wy60-42|wyse60-42|wyse 60 80-column 42-lines:\
:li#42:\
:al=11\EE:cd=260\Ey:cl=260\E+:cm=2\E=%+ %+ :dc=16\EW:\
:dl=11\ER:i1=\EcB2\EcC3:ip=5:nw=6\r\n:r3=150\Ee*:sf=9\n:\
:sr=10\Ej:tc=wy60:
wy60-42-w|wyse60-42-w|wyse 60 132-column 42-lines:\
:Nl#16:co#132:lw#7:ws#97:\
:cd=260\Ey:cl=260\E+:cm=2\Ea%i%dR%dC:dc=19\EW:ho=2\036:\
:ip=6:nw=11\r\n:rs=150\EeF\E`;:tc=wy60-42:
#
wy60-43|wyse60-43|wyse 60 80-column 43-lines:\
:Nl@:lh@:li#43:lw@:\
:pn@:r3=150\Ee+:tc=wy60-42:
wy60-43-w|wyse60-43-w|wyse 60 132-column 43-lines:\
:Nl@:lh@:li#43:lw@:\
:pn@:r3=150\Ee+:tc=wy60-42-w:
#
wy60-vb|wyse60-vb|Wyse 60 visible bell:\
:bl@:tc=wy60:
wy60-w-vb|wy60-wvb|wyse60-wvb|Wyse 60 132-column visible bell:\
:bl@:tc=wy60-w:
# The Wyse-99GT looks at lot like the Wyse 60 except that it
# does not have the 42/43 line mode. In the Wyse-60 the "lines"
# setup parameter controls the number of lines on the screen.
# For the Wyse 99GT the "lines" setup parameter controls the
# number of lines in a page. The screen can display 25 lines max.
# The Wyse-99GT also has personalities for the VT220 and
# Tektronix 4014. But this has no bearing on the native mode.
#
# (msgr) should be set but the clear screen fails when in
# alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
# then set msgr, else use msgr@.
#
# u0 -> enter Tektronix mode
# u1 -> exit Tektronix mode
#
wy99gt|wyse99gt|Wyse 99gt:\
:ms@:\
:al=4\EE:cd=130\Ey:ce=5\Et:cl=130\E+:dc=7\EW:dl=4\ER:\
:i2=20\Ew0:ip=2:nw@:rs=150\E`\072:sf=4\n:sr=3\Ej:ta=1\011:\
:te=\Ew0:ti=\Ew1:u0=\E~>\E8:u1=\E[42h:vb=\E`8\E`9:tc=wy60:
#
wy99gt-w|wyse99gt-w|wyse 99gt 132-column:\
:Nl#16:co#132:lw#7:ws#97:\
:cd=160\Ey:cl=160\E+:cm=2\Ea%i%dR%dC:dc=9\EW:ip=4:\
:rs=150\E`;:tc=wy99gt:
#
wy99gt-25|wyse99gt-25|wyse 99gt 80-column 25-lines:\
:Nl@:lh@:li#25:lw@:\
:pn@:r2=150\E`\072:r3=200\EwG\Ee):tc=wy99gt:
#
wy99gt-25-w|wyse99gt-25-w|wyse 99gt 132-column 25-lines:\
:Nl@:lh@:li#25:lw@:\
:pn@:rs=150\E`;:tc=wy99gt-w:
#
wy99gt-vb|wyse99gt-vb|Wyse 99gt visible bell:\
:bl@:tc=wy99gt:
#
wy99gt-w-vb|wy99gt-wvb|wyse99gt-wvb|Wyse 99gt 132-column visible bell:\
:bl@:tc=wy99gt-w:
# Can't set tabs! Other bugs (ANSI mode only):
# - can't redefine function keys (anyway, key redefinition in ANSI mode
# is too much complex to be described);
# - meta key can't be described (the terminal forgets it when reset);
# The xon-xoff handshaking can't be disabled while in ansi personality, so
# emacs can't work at speed greater than 9600 baud. No padding is needed at
# this speed.
# dch1 has been commented out because it causes annoying glittering when
# vi deletes one character at the beginning of a line with tabs in it.
# dch makes sysgen(1M) have a horrible behaviour when deleting
# a screen and makes screen(1) behave badly, so it is disabled too. The nice
# thing is that vi goes crazy if smir-rmir are present and both dch-dch1 are
# not, so smir and rmir are commented out as well.
# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
# (sgr removed to fit entry within 1023 bytes)
# (acsc removed to fit entry within 1023 bytes)
# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
wy99-ansi|Wyse WY-99GT in ansi mode (int'l PC keyboard):\
:am:km:mi:ms:xn:\
:co#80:it#8:li#25:vt#3:\
:AL=\E[%dL:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:LE=1\E[%dD:\
:RI=1\E[%dC:UP=\E[%dA:ae=^O:al=\E[L:as=^N:bl=^G:bt=\E[Z:\
:cd=8*\E[J:ce=1\E[K:cl=200\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:\
:cs=\E[%i%d;%dr:dl=\E[M:do=\ED:ec=\E[%dX:ei=\E[4l:ho=\E[H:\
:im=\E[4h:\
:is=\E7\E[1r\E8\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[4i:\
:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k5=\E[M:k6=\E[17~:\
:k7=\E[18~:k8=\E[19~:k9=\E[20~:kb=^H:kd=\EOB:ke=\E[?1l:\
:kl=\EOD:kr=\EOC:ks=\E[?1h:ku=\EOA:le=1\010:ll=\E[24E:\
:mb=\E[5m:md=\E[1m:me=\E[m\017\E["q:mh=\E[2m:mr=\E[7m:\
:nd=1\E[C:nw=\EE:rc=\E8:\
:rs=\E[61"p\E[40h\E[?6l\E[1r\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[24E\E[4i:\
:sc=\E7:se=\E[27m:sf=1\n:so=\E[7m:sr=\EM:ta=^I:ue=\E[24m:\
:up=\EM:us=\E[4m:vb=\E[?5h\E[?5l:ve=\E[34h\E[?25h:\
:vi=\E[?25l:vs=\E[34l\E[?25h:
# This is the american terminal. Here tabs work fine.
# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
wy99a-ansi|Wyse WY-99GT in ansi mode (US PC keyboard):\
:ct=\E[3g:i2=\E[?5l:r3=\E[?5l:st=\EH:tc=wy99-ansi:
# This terminal (firmware version 02) has a lot of bugs:
# - can't set tabs;
# - other bugs in ANSI modes (see above).
# This description disables handshaking when using cup. This is because
# GNU emacs doesn't like Xon-Xoff handshaking. This means the terminal
# cannot be used at speeds greater than 9600 baud, because at greater
# speeds handshaking is needed even for character sending. If you use
# DTR handshaking, you can use even greater speeds.
# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
# (sgr removed to fit entry within 1023 bytes)
# (rmacs/smacs removed for consistency)
# (acsc removed to fit entry within 1023 bytes)
# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
wy99f|wy99fgt|wy-99fgt|Wyse WY-99GT (int'l PC keyboard):\
:am:bw:hs:km:mi:ms:xo:\
:co#80:it#8:li#25:ws#46:\
:K1=^^:K3=\EJ:K4=\ET:K5=\EK:al=\EE:bl=^G:bt=\EI:cd=8*\EY:\
:ce=8\ET:cl=\E'\E(\032:cm=\E=%+ %+ :cr=^M:dc=\EW:dl=\ER:\
:do=\Ej:ds=\EF\r:ei=\Er:fs=^M:ho=^^:im=\Eq:\
:is=\Eu\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E\1360\E`1\E`4\Ee.\E`\072\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\EcD\024:\
:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
:k7=^AF\r:k8=^AG\r:k9=^AH\r:kb=^H:kd=^J:kl=^H:kr=^L:ku=^K:\
:le=^H:mb=\EG2:me=\E(\EG0\EcD:mh=\EGp:mr=\EG4:nd=^L:nw=^_:\
:rs=\Eu\E~4\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E\1360\E`1\E`4\Ee.\E`\072\Ee)\Ew\EwG\Ew0\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\Ec@0B\EcD\024:\
:se=\EG0:sf=^J:so=\EG4:sr=\Ej:ta=^I:te=\Ec21\Ec31:\
:ti=\Ec20\Ec30:ts=\EF:up=^K:vb=\E\1361\E\1360:\
:ve=\E`4\E`1:vi=\E`0:vs=\E`2\E`1:
# This is the american terminal. Here tabs work.
# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
wy99fa|wy99fgta|wy-99fgta|Wyse WY-99GT (US PC keyboard):\
:ct=\E0:st=\E1:tc=wy99f:
#
# The Wyse 160 is combination of the WY-60 and the WY-99gt.
# The reset strings are slow and the pad times very depending
# on other parameters such as font loading. I have tried
# to follow the following outline:
#
# <rs1> -> set personality
# <rs2> -> set number of columns
# <rs3> -> set number of lines
# :i1: -> select the proper font
# :is: -> do the initialization
# :i3: -> set up display memory (2 pages)
#
# The display memory may be used for either text or graphics.
# When "Display Memory = Shared" the terminal will have more pages
# but garbage may be left on the screen when you switch from
# graphics to text. If "Display Memory = Unshared" then the
# text area will be only one page long.
#
# (wy160: we use \E{ rather than ^^ for home (both are documented) to avoid
# a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
wy160|wyse160|Wyse 160:\
:5i:am:bw:hs:km:mi:ms:\
:Nl#8:co#80:lh#1:li#24:lw#8:ws#38:\
:#2=\E{:%9=\EP:&3=\Er:@8=\E7:DK=\E`b:F1=^AJ\r:F2=^AK\r:\
:F3=^AL\r:F4=^AM\r:F5=^AN\r:F6=^AO\r:LF=\EA11:LO=\EA10:\
:RA=\Ed.:RC=\E`c:RX=\Ec20:SA=\Ed/:SX=\Ec21:\
:ac=+/,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~:\
:ae=\EcD:al=1\EE:as=\EcE:bl=^G:bt=\EI:cd=30\EY:ce=5\ET:\
:cl=30\E+:cm=\E=%+ %+ :cr=^M:ct=\E0:dc=5\EW:dl=1\ER:do=^J:\
:ds=\EF\r:ei=\Er:fs=^M:ho=\E{:i1=\EcB0\EcC1:i2=100\Ew0:\
:im=\Eq:ip=2:\
:is=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El:\
:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
:k7=^AF\r:k8=^AG\r:k9=^AH\r:k;=^AI\r:kA=\EE:kB=\EI:kD=\EW:\
:kE=\ET:kI=\EQ:kL=\ER:kN=\EK:kP=\EJ:kS=\EY:kb=^H:kd=^J:kh=^^:\
:kl=^H:kr=^L:ku=^K:le=^H:ll=\E{^K:mb=\EG2:\
:me=\E(\EH\003\EG0\EcD:mh=\EGp:mp=\E):nd=^L:nw=1\r\n:\
:pf=^T:po=\Ed#:ps=\EP:r1=70\E~!\E~4:r2=100\E`\072:\
:r3=140\EwG\Ee(:sf=1\n:so=\EGt:sr=1\Ej:st=\E1:ta=^I:\
:te=\Ew0:ti=\Ew1:ts=\EF:up=^K:vb=\E`8\E`9:ve=\E`1:vi=\E`0:\
:tc=adm+sgr:
#
wy160-w|wyse160-w|wyse 160 132-column:\
:Nl#16:co#132:lw#7:ws#90:\
:cm=\Ea%i%dR%dC:dc=9\EW:rs=150\EeF\E`;:tc=wy160:
#
wy160-25|wyse160-25|wyse 160 80-column 25-lines:\
:Nl@:lh@:li#25:lw@:\
:pn@:r3=200\EwG\Ee):tc=wy160:
wy160-25-w|wyse160-25-w|wyse 160 132-column 25-lines:\
:Nl@:lh@:li#25:lw@:\
:pn@:r3=200\EwG\Ee):tc=wy160-w:
#
wy160-42|wyse160-42|wyse 160 80-column 42-lines:\
:li#42:\
:al=2\EE:cd=50\Ey:cl=50\E+:dl=2\ER:i1=\EcB2\EcC3:nw=2\r\n:\
:r3=150\Ee*:sf=2\n:sr=2\Ej:tc=wy160:
wy160-42-w|wyse160-42-w|wyse 160 132-column 42-lines:\
:Nl#16:co#132:lw#7:ws#90:\
:cm=\Ea%i%dR%dC:dc=8\EW:ip=3:rs=150\EeF\E`;:tc=wy160-42:
#
wy160-43|wyse160-43|wyse 160 80-column 43-lines:\
:Nl@:lh@:li#43:lw@:\
:pn@:r3=150\Ee+:tc=wy160-42:
wy160-43-w|wyse160-43-w|wyse 160 132-column 43-lines:\
:Nl@:lh@:li#43:lw@:\
:pn@:r3=150\Ee+:tc=wy160-42-w:
#
wy160-vb|wyse160-vb|Wyse 160 visible bell:\
:bl@:tc=wy160:
wy160-w-vb|wy160-wvb|wyse160-wvb|Wyse 160 132-column visible bell:\
:bl@:tc=wy160-w:
#
# The Wyse 75 is a vt100 lookalike without advanced video.
#
# The Wyse 75 can support one attribute (e.g. Dim, Inverse,
# Underline) without magic cookies. The following description
# uses this capability, but when more than one attribute is
# put on the screen at once, all attributes will be changed
# to be the same as the last attribute given.
# The Wyse 75 can support more attributes when used with magic
# cookies. The wy75-mc terminal description uses magic cookies
# to correctly handle multiple attributes on a screen.
#
# (sgr removed to fit entry within 1023 bytes)
# (acsc removed to fit entry within 1023 bytes)
# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
wy75|wyse75|wyse 75:\
:am:hs:mi:ms:xn:xo:\
:co#80:li#24:ma#1:pb#1201:ws#78:\
:AL=2*\E[%dL:DC=3*\E[%dP:DL=1*\E[%dM:DO=\E[%dB:\
:IC=1*\E[%d@:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:ae=^O:al=2\E[L:\
:as=^N:bl=^G:bt=\E[Z:cd=30\E[J:ce=3\E[K:cl=30\E[H\E[J:\
:cm=\E[%i%d;%dH:cr=^M:cs=2\E[%i%d;%dr:ct=\E[3g:dc=3\E[P:\
:dl=\E[M:do=^J:ds=\E[>,\001\001\E[>-\001\001:ec=\E[%dX:\
:ei=\E[4l:fs=^A:ho=\E[H:\
:i1=\E[2;4;20;30l\E[?1;10l\E[12h\E[?7;8;25h:i2=\E[m:\
:im=\E[4h:ip=1:is=\E>\E(B\E)0\017:k1=\E[?5i:k2=\E[?3i:\
:k3=\E[2i:k4=\E[@:k5=\E[M:k6=\E[17~:k7=\E[18~:k8=\E[19~:\
:k9=\E[20~:kI=\E[@:kN=\E[6~:kP=\E[5~:kb=^H:kd=\E[B:ke=\E>:\
:kh=\E[H:kl=\E[D:kr=\E[C:ks=\E[?1l\E[?7h\E=:ku=\E[A:le=^H:\
:me=\E[m:mh=\E[0t\E[2m:mr=\E[1t\E[7m:nd=\E[C:rc=\E8:\
:sc=\E7:se=\E[m:sf=2\n:so=\E[1t\E[7m:sr=2\EM:st=\EH:ta=^I:\
:ts=\E[>,\001:ue=\E[m:up=\E[A:us=\E[2t\E[4m:\
:vb=250\E[30h\E,\E[30l:ve=\E[?25h:vi=\E[?25l:\
:tc=vt220+keypad:
#
# This terminal description uses the non-hidden attribute mode
# (with magic cookie).
#
wy75-mc|wyse75-mc|wyse 75 with magic cookies:\
:ms@:\
:ma@:sg#1:ug#1:\
:ae=\E[0p\017:as=\E[0p\016:i2=\E[m\E[p:mb=\E[2p:\
:me=\E[0p\017:mh=\E[1p:mk=\E[4p:mr=\E[16p:se=\E[0p:\
:so=\E[17p:ue=\E[0p:us=\E[8p:tc=wy75:
wy75-vb|wyse75-vb|wyse 75 with visible bell:\
:pb@:\
:bl@:tc=wy75:
wy75-w|wyse75-w|wyse 75 in 132 column mode:\
:co#132:ws#130:\
:rs=80\E[35h\E[?3h:tc=wy75:
wy75-wvb|wyse75-wvb|wyse 75 with visible bell 132 columns:\
:pb@:\
:bl@:tc=wy75-w:
#
# Wyse 85 emulating a vt220 7 bit mode.
# 24 line screen with status line.
#
# The vt220 mode permits more function keys but it wipes out
# the escape key. I strongly recommend that <f11> be set to
# escape (esc).
# The terminal may have to be set for 8 data bits and 2 stop
# bits for the arrow keys to work.
# The Wyse 85 runs faster with XON/XOFF enabled. Also the
# :DC: and :IC: work best when XON/XOFF is set. :IC: and
# :DC: leave trash on the screen when used without XON/XOFF.
#
# (sgr removed to fit entry within 1023 bytes)
# (acsc removed to fit entry within 1023 bytes)
# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
wy85|wyse85|wyse 85:\
:am:hs:mi:ms:xn:xo:\
:co#80:it#8:li#24:ws#80:\
:AL=5*\E[%dL:DC=3*\E[%dP:DL=3*\E[%dM:DO=\E[%dB:\
:IC=4*\E[%d@:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:ae=^O:al=5\E[L:\
:as=^N:bl=^G:bt=\E[Z:cd=110\E[J:ce=1\E[K:cl=110\E[H\E[J:\
:cm=1\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=3\E[P:\
:dl=3\E[M:do=^J:ds=\E[40l:ec=\E[%dX:ei=\E[4l:\
:fs=\E[1;24r\E8:ho=\E[H:i1=\E[62;1"p\E[?5W:\
:i2=\E>\E(B\E)0\017\E[m:im=\E[4h:ip=3:\
:is=16\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h:\
:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:kD=\E[3~:\
:kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=^H:kd=\E[B:ke=\E>:kh=\E[26~:\
:kl=\E[D:kr=\E[C:ks=\E[?1l\E=:ku=\E[A:le=^H:mb=\E[5m:\
:md=\E[1m:me=\E[0m:mh=\E[2m:mr=\E[7m:nd=\E[C:rc=\E8:sc=\E7:\
:se=\E[m:sf=3\n:so=\E[7m:sr=3\EM:st=\EH:ta=1\011:\
:ts=\E[40h\E7\E[25;%i%dH:ue=\E[m:up=\E[A:us=\E[4m:\
:vb=300\E[30h\E,\E[30l:ve=\E[?25h:vi=\E[?25l:\
:tc=vt220+keypad:
#
# Wyse 85 with visual bell.
wy85-vb|wyse85-vb|wyse 85 with visible bell:\
:bl@:vb=300\E[30h\E,\E[30l:tc=wy85:
#
# Wyse 85 in 132-column mode.
wy85-w|wyse85-w|wyse 85 in 132-column mode:\
:co#132:ws#132:\
:rs=70\E[35h\E[?3h:tc=wy85:
#
# Wyse 85 in 132-column mode with visual bell.
wy85-wvb|wyse85-wvb|wyse 85 with visible bell 132-columns:\
:bl@:tc=wy85-w:
# From: Kevin Turner <kevint@aracnet.com>, 12 Jul 1998
# This copes with an apparent firmware bug in the wy85. He writes:
# "What I did was change leave the terminal cursor keys set to Normal
# (instead of application), and change \E[ to \233 for all the keys in
# terminfo. At one point, I found some reference indicating that this
# terminal bug (not sending \E[) was acknowledged by Wyse (so it's not just
# me), but I can't find that and the server under my bookmark to "Wyse
# Technical" isn't responding. So there's the question of wether the wy85
# terminfo should reflect the manufactuer's intended behaviour of the terminal
# or the actual."
# (sgr removed to fit entry within 1023 bytes)
# (acsc removed to fit entry within 1023 bytes)
# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
wy85-8bit|wyse85-8bit|wyse 85 in 8-bit mode:\
:am:hs:mi:ms:xn:xo:\
:co#80:it#8:li#24:ws#80:\
:AL=5*\E[%dL:DC=3*\E[%dP:DL=3*\E[%dM:DO=\E[%dB:\
:IC=4*\E[%d@:K1=\EOw:K2=\EOu:K3=\EOy:K4=\EOq:K5=\EOs:\
:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:ae=^O:al=5\E[L:as=^N:bl=^G:\
:bt=\E[Z:cd=110\E[J:ce=1\E[K:cl=110\E[H\E[J:\
:cm=1\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=3\E[P:\
:dl=3\E[M:do=^J:ds=\E[40l:ec=\E[%dX:ei=\E[4l:\
:fs=\E[1;24r\E8:ho=\E[H:i1=\E[62;1"p\E[?5W:\
:i2=\E>\E(B\E)0\017\E[m:im=\E[4h:ip=3:\
:is=16\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h:\
:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k6=\23317~:k7=\23318~:\
:k8=\23319~:k9=\23320~:kD=\2333~:kI=\2332~:kN=\2336~:\
:kP=\2335~:kb=^H:kd=\233B:ke=\E>:kh=\23326~:kl=\233D:\
:kr=\233C:ks=\E[?1l\E=:ku=\233A:le=^H:mb=\E[5m:md=\E[1m:\
:me=\E[m\017:mh=\E[2m:mr=\E[7m:nd=\E[C:rc=\E8:sc=\E7:\
:se=\E[m:sf=3\n:so=\E[7m:sr=3\EM:st=\EH:ta=1\011:\
:ts=\E[40h\E7\E[25;%i%dH:ue=\E[m:up=\E[A:us=\E[4m:\
:vb=300\E[30h\E,\E[30l:ve=\E[?25h:vi=\E[?25l:
#
# Wyse 185 emulating a vt320 7 bit mode.
#
# This terminal always displays 25 lines. These lines may be used
# as 24 data lines and a terminal status line (top or bottom) or
# 25 data lines. The 48 and 50 line modes change the page size
# and not the number of lines on the screen.
#
# The Compose Character key can be used as a meta key if changed
# by set-up.
#
# (sgr removed to fit entry within 1023 bytes)
# (acsc removed to fit entry within 1023 bytes)
# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
wy185|wyse185|wyse 185:\
:am:hs:km:mi:ms:xn:xo:\
:co#80:it#8:li#24:ws#80:\
:AL=3*\E[%dL:DC=3\E[%dP:DL=2*\E[%dM:DO=\E[%dB:IC=2\E[%d@:\
:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:ae=^O:al=3\E[L:as=^N:bl=^G:\
:bt=\E[Z:cd=40\E[J:ce=\E[K:cl=40\E[H\E[J:cm=\E[%i%d;%dH:\
:cr=^M:cs=20\E[%i%d;%dr:ct=\E[3g:dc=3\E[P:dl=2\E[M:do=^J:\
:ds=\E7\E[99;0H\E[K\E8:ec=\E[%dX:ei=\E[4l:\
:fs=\E[1;24r\E8:ho=\E[H:i1=\E[?5W:\
:i2=\E>\E(B\E)0\017\E[m:im=\E[4h:ip=4:\
:is=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h:\
:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k6=\E[17~:k7=\E[18~:\
:k8=\E[19~:k9=\E[20~:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:\
:kb=^H:kd=\E[B:ke=\E>:kh=\E[26~:kl=\E[D:kr=\E[C:\
:ks=\E[?1l\E=:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[0m:\
:mh=\E[2m:mr=\E[7m:nd=\E[C:rc=\E8:sc=\E7:se=\E[27m:sf=2\n:\
:so=\E[7m:sr=2\EM:st=\EH:ta=^I:te=\E[ R:ti=\E[ Q:\
:ts=\E7\E[99;%i%dH:ue=\E[24m:up=\E[A:us=\E[4m:\
:vb=100\E[30h\E,\E[30l:ve=\E[34h\E[?25h:vi=\E[?25l:\
:vs=\E[?25h\E[34l:tc=vt220+keypad:
#
# Wyse 185 with 24 data lines and top status (terminal status)
wy185-24|wyse185-24|wyse 185 with 24 data lines:\
:hs@:\
:ds@:fs@:r3=\E[?5l\E[47h\E[40l\E[1;24r:ts@:tc=wy185:
#
# Wyse 185 with visual bell.
wy185-vb|wyse185-vb|wyse 185+flash:\
:bl@:tc=wy185:
#
# Wyse 185 in 132-column mode.
wy185-w|wyse185-w|wyse 185 in 132-column mode:\
:co#132:ws#132:\
:DC=7\E[%dP:IC=7\E[%d@:dc=7\E[P:ei=:im=:ip=7:\
:rs=\E[35h\E[?3h:tc=wy185:
#
# Wyse 185 in 132-column mode with visual bell.
wy185-wvb|wyse185-wvb|wyse 185+flash+132 cols:\
:bl@:tc=wy185-w:
# wy325 terminfo entries
# Done by Joe H. Davis 3-9-92
# lines 25 columns 80
#
wy325|wyse325|Wyse epc:\
:5i:am:bw:hs:mi:\
:Nl#8:co#80:lh#1:li#24:lw#8:pb#9601:ws#45:\
:#2=\E{:%9=\EP:&3=\Er:@8=\E7:F1=^AJ\r:F2=^AK\r:F3=^AL\r:\
:F4=^AM\r:F5=^AN\r:F6=^AO\r:LF=\EA11:LO=\EA10:RA=\Ed.:\
:SA=\Ed/:\
:ac=+/,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~:\
:ae=\EcD:al=3\EE:as=\EcE:bl=^G:bt=\EI:cd=50\EY:ce=4\ET:\
:cl=50\E+:cm=\E=%+ %+ :cr=^M:ct=\E0:dc=7\EW:dl=3\ER:do=^J:\
:ds=\EF\r:ei=\Er:fs=^M:ho=^^:i1=\EcB0\EcC1:i2=16\Ew0:\
:im=\Eq:ip=2:\
:is=\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El:\
:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
:k7=^AF\r:k8=^AG\r:k9=^AH\r:k;=^AI\r:kA=\EE:kB=\EI:kD=\EW:\
:kE=\ET:kI=\Eq:kL=\ER:kN=\EK:kP=\EJ:kS=\EY:kb=^H:kd=^J:kh=^^:\
:kl=^H:kr=^L:ku=^K:le=^H:ll=^^^K:mb=\EG2:\
:me=\E(\EH\003\EG0\EcD:mh=\EGp:mp=\E):nd=^L:pf=^T:po=\Ed#:\
:ps=\EP:r1=30\E~!\E~4:r2=70\EeF\E`\072:r3=100\EwG\Ee(:\
:sf=3\n:so=\EGt:sr=2\Ej:st=\E1:ta=^I:te=\Ew0:ti=\Ew1:ts=\EF:\
:up=^K:vb=\E`8\E`9:ve=\E`1:vi=\E`0:tc=adm+sgr:
#
# lines 24 columns 80 vb
#
wy325-vb|wyse325-vb|wyse-325 with visual bell:\
:bl@:tc=wy325:
#
# lines 24 columns 132
#
wy325-w|wyse325-w|wy325w-24|wyse-325 in wide mode:\
:Nl#16:co#132:lw#7:ws#97:\
:cm=\Ea%i%dR%dC:dc=12\EW:ip=4:rs=70\E`;:tc=wy325:
#
# lines 25 columns 80
#
wy325-25|wyse325-25|wy325-80|wyse-325|wyse-325 25 lines:\
:Nl@:lh@:li#25:lw@:\
:pn@:r3=100\EwG\Ee):tc=wy325:
#
# lines 25 columns 132
#
wy325-25w|wyse325-25w|wy325 132 columns:\
:Nl@:lh@:li#25:lw@:\
:pn@:r3=100\EwG\Ee):tc=wy325-w:
#
# lines 25 columns 132 vb
#
wy325-w-vb|wy325-wvb|wyse325-wvb|wyse-325 wide mode reverse video:\
:bl@:tc=wy325-w:
#
# lines 42 columns 80
#
wy325-42|wyse325-42|wyse-325 42 lines:\
:Nl@:lh@:li#42:lw@:\
:pn@:r3=100\EwG\Ee):tc=wy325:
#
# lines 42 columns 132
#
wy325-42w|wyse325-42w|wyse-325 42 lines wide mode:\
:Nl@:lh@:li#42:lw@:\
:pn@:r3=100\EwG\Ee):tc=wy325-w:
#
# lines 42 columns 132 vb
#
wy325-42w-vb|wy325-42wvb|wyse-325 42 lines wide mode visual bell:\
:bl@:tc=wy325-w:
#
# lines 43 columns 80
#
wy325-43|wyse325-43|wyse-325 43 lines:\
:Nl@:lh@:li#43:lw@:\
:pn@:tc=wy325:
#
# lines 43 columns 132
#
wy325-43w|wyse325-43w|wyse-325 43 lines wide mode:\
:Nl@:lh@:li#43:lw@:\
:pn@:r3=100\EwG\Ee):tc=wy325-w:
#
# lines 43 columns 132 vb
#
wy325-43w-vb|wy325-43wvb|wyse-325 43 lines wide mode visual bell:\
:bl@:tc=wy325-w:
# Wyse 370 -- 24 line screen with status line.
#
# The terminal may have to be set for 8 data bits and 2 stop
# bits for the arrow keys to work.
#
# If you change keyboards the terminal will send different
# escape sequences.
# The following definition is for the basic terminal without
# function keys.
#
# <u0> -> enter Tektronix 4010/4014 mode
# <u1> -> exit Tektronix 4010/4014 mode
# <u2> -> enter ASCII mode (from any ANSI mode)
# <u3> -> exit ASCII mode (goto native ANSI mode)
# <u4> -> enter Tek 4207 ANSI mode (from any ANSI mode)
# <u5> -> exit Tek 4207 mode (goto native ANSI mode)
#
# Bug: The <op> capability resets attributes.
# (sgr removed to fit entry within 1023 bytes)
# (acsc removed to fit entry within 1023 bytes)
# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
wy370-nk|wyse 370 without function keys:\
:am:hs:mi:ms:xn:xo:\
:co#80:it#8:li#24:ws#80:\
:AL=2*\E[%dL:DC=1*\E[%dP:DL=2*\E[%dM:DO=\E[%dB:\
:IC=1*\E[%d@:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:ae=^O:al=2\E[L:\
:as=^N:bl=^G:bt=\E[Z:cd=40\E[J:ce=10\E[K:cl=40\E[H\E[J:\
:cm=1\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=1\E[P:\
:dl=2\E[M:do=^J:ds=\E[40l:ec=.1*\E[%dX:ei=\E[4l:\
:fs=\E[1;24r\E8:ho=\E[H:i1=6\E[90;1"p\E[?5W:\
:i2=\E>\017\E)0\E(B\E[63;0w\E[m:im=\E[4h:ip=1:\
:is=\E[2;4;20;30;40l\E[?1;10;16l\E[12h\E[?7;8;25h:\
:ke=\E>:ks=\E[?1l\E=:le=^H:mb=\E[5m:md=\E[1m:me=\E[0m:\
:mh=\E[2m:mr=\E[7m:nd=\E[C:rc=\E8:sc=\E7:se=\E[27m:sf=2\n:\
:so=\E[7m:sr=2\EM:st=\EH:ta=1\011:te=\E[ R:ti=\E[ Q:\
:ts=\E[40l\E[40h\E7\E[99;%i%dH:ue=\E[24m:up=\E[A:\
:us=\E[4m:vb=300\E[30h\E,\E[30l:ve=\E[34h\E[?25h:\
:vi=\E[?25l:vs=\E[?25h\E[34l:
#
# Function key set for the ASCII (wy-50 compatible) keyboard
# This is the default 370.
#
wy370|wyse370|wy370-101k|Wyse 370 with 101 key keyboard:\
:@8=\EOM:F1=\E[23~:F2=\E[24~:F3=\E[25~:F4=\E[26~:\
:F5=\E[28~:F6=\E[29~:k1=\E[?4i:k2=\E[?3i:k3=\E[2i:k4=\E[@:\
:k5=\E[M:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:\
:k;=\E[21~:kA=\EOP:kB=\E[Z:kD=\EOQ:kI=\EOP:kL=\EOQ:kN=\E[U:\
:kP=\E[V:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:\
:tc=wy370-nk:
#
# Function key set for the VT-320 (and wy85) compatible keyboard
#
wy370-105k|Wyse 370 with 105 key keyboard:\
:%1=\E[28~:*6=\E[4~:@0=\E[1~:F1=\E[23~:F2=\E[24~:\
:F3=\E[25~:F4=\E[26~:F5=\E[28~:F6=\E[29~:F7=\E[31~:\
:F8=\E[32~:F9=\E[33~:FA=\E[34~:k6=\E[17~:k7=\E[18~:\
:k8=\E[19~:k9=\E[20~:k;=\E[21~:kD=\E[3~:kI=\E[2~:kN=\E[6~:\
:kP=\E[5~:kb=^H:kd=\E[B:kh=\E[26~:kl=\E[D:kr=\E[C:ku=\E[A:\
:l1=PF1:l2=PF2:l3=PF3:l4=PF4:tc=wy370-nk:tc=vt220+keypad:
#
# Function key set for the PC compatible keyboard
#
wy370-EPC|Wyse 370 with 102 key keyboard:\
:@7=\E[1~:@8=\EOM:F1=\E[23~:F2=\E[24~:k1=\EOP:k2=\EOQ:\
:k3=\EOR:k4=\EOS:k5=\E[M:k6=\E[17~:k7=\E[18~:k8=\E[19~:\
:k9=\E[20~:k;=\E[21~:kB=\E[Z:kI=\E[2~:kN=\E[U:kP=\E[V:\
:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:tc=wy370-nk:
#
# Wyse 370 with visual bell.
wy370-vb|Wyse 370 with visible bell:\
:bl@:tc=wy370:
#
# Wyse 370 in 132-column mode.
wy370-w|Wyse 370 in 132-column mode:\
:co#132:ws#132:\
:rs=70\E[35h\E[?3h:tc=wy370:
#
# Wyse 370 in 132-column mode with visual bell.
wy370-wvb|Wyse 370 with visible bell 132-columns:\
:vb=300\E[30h\E,\E[30l:tc=wy370-w:
wy370-rv|Wyse 370 reverse video:\
:r3=\E[32h\E[?5h:tc=wy370:
#
# Wyse 99gt Tektronix 4010/4014 emulator,
#
wy99gt-tek|Wyse 99gt Tektronix 4010/4014 emulator:\
:am:os:\
:co#74:li#35:\
:bl=^G:cl=\E^L:cr=^M:do=^J:ff=^L:\
:hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037:\
:ho=^]7`x @\037:\
:hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037:\
:is=\E8:le=^H:nd=\040:nw=^M^J:u0=\E~>\E8:u1=\E[42h:up=^K:
#
# Wyse 160 Tektronix 4010/4014 emulator,
#
wy160-tek|Wyse 160 Tektronix 4010/4014 emulator:\
:ho=^]8`g @\037:tc=wy99gt-tek:
#
# Wyse 370 Tektronix 4010/4014 emulator,
#
wy370-tek|Wyse 370 Tektronix 4010/4014 emulator:\
:am:os:\
:co#80:li#36:\
:bl=^G:cl=\E^L:cr=^M:do=^J:ff=^L:\
:hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037:\
:ho=^]8g @\037:\
:hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037:\
:is=\E8:kb=^H:kd=^J:kl=^H:kr=^I:ku=^K:le=^H:nd=\040:nw=^M^J:\
:u0=\E[?38h\E8:u1=\E[?38l\E)0:up=^K:
# Vendor-supplied Wyse entries end here.
#
#TITLE: TERMINFO ENTRY WY520
#DATE: 8/5/93
# The WY520 terminfo is based on the WY285 entry published on the WYSE
# BBS with the addition of more function keys and special keys.
#
# rs1 -> set personality
# rs2 -> set number of columns
# rs3 -> set number of lines
# is1 -> select the proper font
# is2 -> do the initialization
# is3 -> If this string is empty then rs3 gets sent.
#
# Wyse 520 emulating a vt420 7 bit mode with default ANSI keyboard
# - The BS key is programmed to generate BS in smcup since
# is2 doesn't seem to work.
# - Remove and shift/Remove: delete a character
# - Insert : enter insert mode
# - Find : delete to end of file
# - Select : clear a line
# - F11, F12, F13: send default sequences (not ESC, BS, LF)
# - F14 : Home key
# - Bottom status line (host writable line) is used.
# - smkx,rmkx are removed because this would put the numeric
# keypad in Dec application mode which doesn't seem to work
# with SCO applications.
#
# (sgr removed to fit entry within 1023 bytes)
# (acsc removed to fit entry within 1023 bytes)
# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
wy520|wyse520|wyse 520:\
:am:hs:km:mi:xn:xo:\
:co#80:it#8:li#24:ws#80:\
:AL=3*\E[%dL:DC=3\E[%dP:DL=2*\E[%dM:DO=\E[%dB:IC=2\E[%d@:\
:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:ae=^O:al=3\E[L:as=^N:bl=^G:\
:bt=\E[Z:cd=40\E[J:ce=\E[K:cl=40\E[H\E[J:cm=\E[%i%d;%dH:\
:cr=^M:cs=20\E[%i%d;%dr:ct=\E[3g:dc=30\E[P:dl=2\E[M:do=^J:\
:ds=\E[0$~:ec=\E[%dX:ei=\E[4l:fs=\E[0$}:ho=\E[H:i1=\E[?5W:\
:i2=\E>\E(B\E)0\017\E[m:im=\E[4h:ip=4:\
:is=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25;67h:\
:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:kD=\E[3~:\
:kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=^H:kd=\E[B:kh=\E[26~:\
:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[0m:\
:mh=\E[2m:mr=\E[7m:nd=\E[C:rc=\E8:sc=\E7:se=\E[m:sf=2\n:\
:so=\E[7m:sr=2\EM:st=\EH:ta=^I:te=\E[ R:ti=\E[ Q\E[?67;8h:\
:ts=\E[2$~\E[1$}\E[%i%d`:ue=\E[24m:up=\E[A:us=\E[4m:\
:ve=\E[34h\E[?25h:vi=\E[?25l:vs=\E[?25h\E[34l:\
:tc=vt220+keypad:
#
# Wyse 520 with 24 data lines and status (terminal status)
wy520-24|wyse520-24|wyse 520 with 24 data lines:\
:hs@:\
:ds@:fs@:r3=\E[?5l\E[47h\E[40l\E[1;24r:ts@:tc=wy520:
#
# Wyse 520 with visual bell.
wy520-vb|wyse520-vb|wyse 520 with visible bell:\
:vb=100\E[30h\E,\E[30l:tc=wy520:
#
# Wyse 520 in 132-column mode.
wy520-w|wyse520-w|wyse 520 in 132-column mode:\
:co#132:ws#132:\
:DC=7\E[%dP:IC=7\E[%d@:dc=7\E[P:ei=:im=:ip=7:\
:rs=\E[35h\E[?3h:tc=wy520:
#
# Wyse 520 in 132-column mode with visual bell.
wy520-wvb|wyse520-wvb|wyse 520 with visible bell 132-columns:\
:vb=100\E[30h\E,\E[30l:tc=wy520-w:
#
#
# Wyse 520 emulating a vt420 7 bit mode.
# The DEL key is programmed to generate BS in is2.
# With EPC keyboard.
# - 'End' key will clear till end of line on EPC keyboard
# - Shift/End : ignored.
# - Insert : enter insert mode.
# - Delete : delete a character (have to change interrupt character
# to CTRL-C: stty intr '^c') for it to work since the
# Delete key sends 7FH.
wy520-epc|wyse520-epc|wyse 520 with EPC keyboard:\
:@7=\E[4~:k0=\E[21~:k1=\E[11~:k2=\E[12~:k3=\E[13~:\
:k4=\E[14~:k5=\E[15~:kD=\177:kE=\E[4~:kh=\E[H:tc=wy520:
#
# Wyse 520 with 24 data lines and status (terminal status)
# with EPC keyboard.
wy520-epc-24|wyse520-pc-24|wyse 520 with 24 data lines and EPC keyboard:\
:hs@:\
:ds@:fs@:r3=\E[?5l\E[47h\E[40l\E[1;24r:ts@:tc=wy520-epc:
#
# Wyse 520 with visual bell.
wy520-epc-vb|wyse520-pc-vb|wyse 520 with visible bell and EPC keyboard:\
:vb=100\E[30h\E,\E[30l:tc=wy520-epc:
#
# Wyse 520 in 132-column mode.
wy520-epc-w|wyse520-epc-w|wyse 520 in 132-column mode with EPC keyboard:\
:co#132:ws#132:\
:DC=7\E[%dP:IC=7\E[%d@:dc=7\E[P:ei=:im=:ip=7:\
:rs=\E[35h\E[?3h:tc=wy520-epc:
#
# Wyse 520 in 132-column mode with visual bell.
wy520-epc-wvb|wyse520-p-wvb|wyse 520 with visible bell 132-columns and EPC keyboard:\
:vb=100\E[30h\E,\E[30l:tc=wy520-epc-w:
#
# Wyse 520 in 80-column, 36 lines
wy520-36|wyse520-36|wyse 520 with 36 data lines:\
:hs@:\
:li#36:\
:ds@:fs@:r3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r:ts@:\
:tc=wy520:
#
# Wyse 520 in 80-column, 48 lines
wy520-48|wyse520-48|wyse 520 with 48 data lines:\
:hs@:\
:li#48:\
:ds@:fs@:r3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r:ts@:\
:tc=wy520:
#
# Wyse 520 in 132-column, 36 lines
wy520-36w|wyse520-36w|wyse 520 with 132 columns and 36 data lines:\
:co#132:ws#132:\
:r2=\E[?3h:\
:r3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|:\
:tc=wy520-36:
#
# Wyse 520 in 132-column, 48 lines
wy520-48w|wyse520-48w|wyse 520 with 48 data lines:\
:co#132:ws#132:\
:r2=\E[?3h:\
:r3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|:\
:tc=wy520-48:
#
#
# Wyse 520 in 80-column, 36 lines with EPC keyboard
wy520-36pc|wyse520-36pc|wyse 520 with 36 data lines and EPC keyboard:\
:hs@:\
:li#36:\
:ds@:fs@:r3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r:ts@:\
:tc=wy520-epc:
#
# Wyse 520 in 80-column, 48 lines with EPC keyboard
wy520-48pc|wyse520-48pc|wyse 520 with 48 data lines and EPC keyboard:\
:hs@:\
:li#48:\
:ds@:fs@:r3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r:ts@:\
:tc=wy520-epc:
#
# Wyse 520 in 132-column, 36 lines with EPC keyboard
wy520-36wpc|wyse520-36wpc|wyse 520 with 36 data lines and EPC keyboard:\
:co#132:ws#132:\
:r2=\E[?3h:\
:r3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|:\
:tc=wy520-36pc:
#
# Wyse 520 in 132-column, 48 lines with EPC keyboard
wy520-48wpc|wyse520-48wpc|wyse 520 with 48 data lines and EPC keyboard:\
:co#132:ws#132:\
:r2=\E[?3h:\
:r3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|:\
:tc=wy520-48pc:
# From: John Gilmore <hoptoad!gnu@lll-crg.arpa>
# (wyse-vp: removed :if=/usr/share/tabset/wyse-adds:, there's no such
# file and we don't know what :st: is -- esr)
wyse-vp|Wyse 50 in ADDS Viewpoint emulation mode with "enhance" on:\
:am:bs:\
:co#80:it#8:li#24:\
:al=\EM:bl=^G:cd=\Ek:ce=\EK:cl=^L:cm=\EY%+ %+ :cr=^M:dc=\EW:\
:dl=\El:do=^J:ei=\Er:ho=^A:im=\Eq:is=\E`\072\E`9\017\Er:\
:kb=^H:kd=^J:kh=^A:kl=^U:kr=^F:ku=^Z:le=^H:ll=^A^Z:me=^O:\
:nd=^F:nw=^M^J:r1=\E`\072\E`9\017\Er:se=^O:sf=^J:so=^N:\
:ta=^I:ue=^O:up=^Z:us=^N:
wy75ap|wyse75ap|wy-75ap|wyse-75ap|Wyse WY-75 Applications and Cursor keypad:\
:is=\E[1;24r\E[?10;3l\E[?1;25h\E[4l\E[m\E(B\E=:kb=^H:\
:kd=\EOB:ke=10\E[?1l\E>:kh=\EOH:kl=\EOD:kr=\EOC:\
:ks=10\E[?1h\E=:ku=\EOA:tc=wy75:
# From: Eric Freudenthal <freudent@eric.ultra.nyu.edu>
wy100q|Wyse 100 for Quotron:\
:bs:\
:co#80:li#24:sg#1:\
:al=\EE:bt=\EI:cd=\EY:ce=\ET:cl=^Z:cm=\E=%+ %+ :dc=\EW:\
:dl=\ER:do=^J:ei=\Er:ho=^^:im=\Eq:\
:is=\E`\072\200\EC\EDF\E0\E'\E(\EA21:kd=^J:kl=^H:kr=^L:\
:ku=^K:le=^H:mk@:nd=^L:sr=\Ej:up=^K:tc=adm+sgr:
#### Kermit terminal emulations
#
# Obsolete Kermit versions may be listed in the section describing obsolete
# non-ANSI terminal emulators later in the file.
#
# KERMIT standard all versions.
# Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
# (kermit: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
# From: greg small <gts@populi.berkeley.edu> 9-25-84
kermit|standard kermit:\
:bs:\
:co#80:li#24:\
:cd=\EJ:ce=\EK:cl=\EE:cm=\EY%+ %+ :do=\EB:ho=\EH:\
:is=K0 Standard Kermit 9-25-84\n:kd=^J:kh=^^:kl=^H:\
:kr=^L:ku=^K:le=^H:nd=\EC:up=\EA:
kermit-am|standard kermit plus auto-margin:\
:am:\
:is=K1 Standard Kermit plus Automatic Margins\n:\
:tc=kermit:
# IBMPC Kermit 1.2.
# Bugs: :cd:, :ce:: do not work except at beginning of line! :cl: does
# not work, but fake with :cl=\EH\EJ (since :cd=\EJ: works at beginning of
# line).
# From: greg small <gts@populi.berkeley.edu> 8-30-84
pckermit|pckermit12|UCB IBMPC Kermit 1.2:\
:am:\
:li#25:\
:cd@:ce@:cl=\EH\EJ:\
:is=K2 UCB IBMPC Kermit 1.2 8-30-84\n:tc=kermit:
# IBMPC Kermit 1.20
# Cannot use line 25, now acts funny like ansi special scrolling region.
# Initialization must escape from that region by cursor position to line 24.
# Cannot use character insert because 1.20 goes crazy if insert at col 80.
# Does not use :am: because autowrap is lost when kermit dropped and restarted.
# From: greg small <gts@populi.berkeley.edu> 12-19-84
pckermit120|UCB IBMPC Kermit 1.20:\
:it#8:li#24:\
:al=\EL:dc=\EN:dl=\EM:do=\EB:ei@:im@:\
:is=\EO\Eq\EJ\EY7 K3 UCB IBMPC Kermit 1.20 12-19-84\n:\
:se=\Eq:so=\Ep:ta=^I:vs=\EO\Eq\EEK3:tc=kermit:
# MS-DOS Kermit 2.27 for the IBMPC
# Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
# Cannot use line 25, now acts funny like ansi special scrolling region.
# Initialization must escape from that region by cursor position to line 24.
# Does not use am: because autowrap is lost when kermit dropped and restarted.
# Reverse video for standout like H19.
# (msk227: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
# From: greg small <gts@populi.berkeley.edu> 3-17-85
msk227|mskermit227|MS-DOS Kermit 2.27 for the IBMPC:\
:am@:bs:\
:co#80:it#8:li#24:\
:al=\EL:cd=\EJ:ce=\EK:cl=\EE:cm=\EY%+ %+ :dc=\EN:dl=\EM:\
:do=\EB:ei=\EO:ho=\EH:im=\E@:\
:is=\EO\Eq\EG\Ew\EJ\EY7 K4 MS Kermit 2.27 for the IBMPC 3-17-85\n:\
:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:le=^H:nd=\EC:rc=\Ek:sc=\Ej:\
:se=\Eq:so=\Ep:ta=^I:up=\EA:vs=\EO\Eq\EG\EwK4:
# MS-DOS Kermit 2.27 with automatic margins
# From: greg small <gts@populi.berkeley.edu> 3-17-85
msk227am|mskermit227am|UCB MS-DOS Kermit 2.27 with automatic margins:\
:am:\
:is=\EO\Eq\EG\Ev\EJ\EY7 K5 MS Kermit 2.27 +automatic margins 3-17-85\n:\
:vs=\EO\Eq\EG\EvK5:tc=msk227:
# MS-DOS Kermit 2.27 UCB 227.14 for the IBM PC
# Automatic margins now default. Use ansi :sa: for highlights.
# Define function keys.
# (msk22714: removed obsolete ":kn#10:" -- esr)
# From: greg small <gts@populi.berkeley.edu> 3-17-85
msk22714|mskermit22714|UCB MS-DOS Kermit 2.27 UCB 227.14 IBM PC:\
:am:\
:is=\EO\Eq\EG\Ev\EJ\EY7 K6 MS Kermit 2.27 UCB 227.14 IBM PC 3-17-85\n:\
:k0=\E0:k1=\E1:k2=\E2:k3=\E3:k4=\E4:k5=\E5:k6=\E6:k7=\E7:\
:k8=\E8:k9=\E9:md=\E[1m:me=\E[m:mr=\E[7m:se=\E[m:so=\E[1m:\
:ue=\E[m:us=\E[4m:vs=\EO\Eq\EG\EvK6:tc=mskermit227:
# This was designed for a VT320 emulator, but it is probably a good start
# at support for the VT320 itself.
# Please send changes with explanations to bug-gnu-emacs@prep.ai.mit.edu.
# (vt320-k3: I added <rmam>/<smam> based on the init string -- esr)
# (acsc removed to fit entry within 1023 bytes)
# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
vt320-k3|MS-Kermit 3.00's vt320 emulation:\
:am:es:hs:km:mi:ms:xn:\
:co#80:it#8:li#49:pb#9600:vt#3:\
:AL=\E[%dL:CC=\E:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
:LE=\E[%dD:RI=\E[%dC:SR=\E[%dL:UP=\E[%dA:ae=\E(B:al=\E[L:\
:as=\E(0:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:\
:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:\
:ds=\E[0$~:ec=\E[%dX:ei=\E[4l:fs=\E[0$}:ho=\E[H:im=\E[4h:\
:is=\E>\E F\E[?1l\E[?7h\E[r\E[2$~:k0=\E[21~:k1=\EOP:\
:k2=\EOQ:k3=\EOR:k4=\EOS:k6=\E[17~:k7=\E[18~:k8=\E[19~:\
:k9=\E[20~:kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=^H:kd=\EOB:\
:ke=\E[?1l\E>:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:\
:mb=\E[5m:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:nw=^M^J:rc=\E8:\
:sc=\E7:se=\E[27m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
:ts=\E[1$}\r\E[K:ue=\E[24m:up=\E[A:us=\E[4m:\
:vb=\E[?5h\E[?5l\E[?5h\E[?5l\E[?5h\E[?5l:ve=\E[?25h:\
:vi=\E[?25l:
# From: Joseph Gil <yogi@cs.ubc.ca> 13 Dec 1991
# ACS capabilities from Philippe De Muyter <phdm@info.ucl.ac.be> 30 May 1996
# (I removed a bogus boolean :mo: and added :ms:, <smam>, <rmam> -- esr)
vt320-k311|dec vt320 series as defined by kermit 3.11:\
:am:es:hs:mi:ms:xn:xo:\
:co#80:it#8:li#24:vt#3:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
:LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:UP=\E[%dA:\
:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
:ae=^O:al=3\E[L:as=^N:bl=^G:cd=\E[J:ce=\E[K:cl=\E[;H\E[2J:\
:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:\
:dl=\E[M:do=^J:ds=\E[2$~\r\E[1$}\E[K\E[$}:ei=\E[4l:\
:fs=\E[$}:ho=\E[H:im=\E[4h:\
:is=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H:\
:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k6=\E[17~:k7=\E[18~:\
:k8=\E[19~:k9=\E[20~:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:\
:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:l1=pf1:l2=pf2:l3=pf3:l4=pf4:\
:le=^H:mb=\E[5m:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:nw=^M\ED:\
:r1=\E[?3l:rc=\E8:rf=/usr/share/tabset/vt100:sc=\E7:\
:se=\E[27m:sf=\ED:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
:ts=\E[2$~\E[1$}\E[1;%dH:ue=\E[24m:up=\E[A:us=\E[4m:\
:vb=\E[?5h\E[?5l:ve=\E[?25h:vi=\E[?25l:
######## NON-ANSI TERMINAL EMULATIONS
#
#### Avatar
#
# These entries attempt to describe Avatar, a terminal emulation used with
# MS-DOS bulletin-board systems. It was designed to give ANSI-like
# capabilities, but with cheaper (shorter) control sequences. Messy design,
# excessively dependent on PC idiosyncracies, but apparently rather popular
# in the BBS world.
#
# No color support. Avatar doesn't fit either of the Tektronix or HP color
# models that terminfo knows about. An Avatar color attribute is the
# low 7 bits of the IBM-PC display-memory attribute. Bletch.
#
# I wrote these entries while looking at the Avatar spec. I don't have
# the facilities to test them. Let me know if they work, or don't.
#
# Avatar escapes not used by these entries (because maybe you're smarter
# and more motivated than I am and can figure out how to wrap terminfo
# around some of them, and because they are weird enough to be funny):
# level 0:
# ^L -- clear window/reset current attribute to default
# ^V^A%p1%c -- set current color attribute, parameter decodes as follows:
#
# bit: 6 5 4 3 2 1 0
# | | | | |
# +---+---+ | +---+---+
# | | |
# | | foreground color
# | foreground intensity
# background color
# level 0+:
# ^V^J%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) up by p1 lines
# ^V^K%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) down by p1 lines
# ^V^L%p1%c%p2%c%p3%c -- clear p2 lines and p3 cols w/attr %p1
# ^V^M%p1%c%p2%c%p3%c%p4%c -- fill p3 lines & p4 cols w/char p2+attr %p1
# (^V^L and ^V^M set the current attribute as a side-effect.)
# ^V ^Y <a> [...] <c> -- repeat pattern. <a> specifies the number of bytes
# in the pattern, <c> the number of times the pattern
# should be repeated. If either value is 0, no-op.
# The pattern can contain Avatar console codes,
# including other ^V ^Y patterns.
# level 1:
# ^V^O -- clockwise mode on; turn print direction right each time you
# hit a window edge (yes, really). Turned off by CR
# ^V^P -- no-op
# ^V^Q%c -- query the driver
# ^V^R -- driver reset
# ^V^S -- Sound tone (PC-specific)
# ^V^T -- change highlight at current cursor poition to %c
# ^V^U%p1%c%p2%c -- highlight window <a> with attribute <b>
# ^V^V%p1%c%p2%c%p3%c%p4%c%p5%c
# -- define window
#
# From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
# (The :mb:/:md:/:mr:/:as:/:us:/:so: capabilities exist only to
# tell ncurses that the corresponding highlights exist; it should use :sa:,
# which is the only method that will actually work for multiple highlights.)
#
# Update by TD - 2004: half of this was inconsistent. Found documentation
# and repaired most of the damage. sgr0 is probably incorrect, but the
# available documentation gives no clues for a workable string.
avatar0|avatar terminal emulator level 0:\
:am:ms:ut:\
:co#80:it#8:li#25:\
:ae@:as@:ce=^V^G:cm=\026\010%.%.:cr=^M:do=^V^D:le=^V^E:\
:mb=^V^B:md=^V^A^P:me=^V^A^G:mk=^V^A\200:mr=^V^Ap:nd=^V^F:\
:rp=\031%.%.:rs=^L:sf=^J:so=^V^Ap:up=^V^C:us=^V^A^A:\
:tc=klone+acs:
# From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
avatar0+|avatar terminal emulator level 0+:\
:dc=^V^N:ei=\026\n\200\200\200\200:im=^V^I:tc=avatar0:
# From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
avatar|avatar1|avatar terminal emulator level 1:\
:RA=^V":SA=^V$:al=^V+:dl=^V-:ei=^V^P:ve=^V'^A:vi=^V'^B:\
:vs=^V^C:tc=avatar0+:
#### RBcomm
#
# RBComm is a lean and mean terminal emulator written by the Interrupt List
# maintainer, Ralf Brown. It was fairly popular in the late DOS years (early
# '90s), especially in the BBS world, and still has some loyal users due to
# its very small memory footprint and to a cute macro language.
rbcomm|IBM PC with RBcomm and EMACS keybindings:\
:am:bw:mi:ms:xn:\
:co#80:it#8:li#25:\
:AL=\E[%dL:DL=\E[%dM:al=^K:bl=^G:bt=\E[Z:cd=^F5:ce=^P^P:\
:cl=^L:cm=\037%r%+ %+ :cr=^M:cs=\E[%i%d;%dr:dc=^W:dl=^Z:\
:dm=:do=^C:ec=\E[%dX:ed=:ei=^]:im=^\:\
:is=\017\035\E(B\E)0\E[?7h\E[?3l\E[>8g:kb=^H:kd=^N:\
:ke=\E>:kh=^A:kl=^B:kr=^F:ks=\E=:ku=^P:le=^H:mb=\E[5m:\
:md=\E[1m:me=\E[m:mk=\E[8m:mr=^R:nd=^B:nw=^M\ED:\
:r1=\017\E(B\E)0\025\E[?3l\E[>8g:rc=\E8:rp=\030%.%.:\
:sc=\E7:se=^U:sf=\ED:so=^R:sr=\EM:ta=^I:te=:ti=:ue=^U:up=^^:\
:us=^T:ve=\E[?25h:vi=\E[?25l:
rbcomm-nam|IBM PC with RBcomm without autowrap:\
:am@:\
:bl=^G:cr=^M:do=^J:\
:is=\017\035\E(B\E)0\E[?7l\E[?3l\E[>8g:kb=^H:kd=^J:\
:kl=^H:nw=^M^J:sf=^J:ta=^I:tc=rbcomm:
rbcomm-w|IBM PC with RBcomm in 132 column mode:\
:co#132:\
:bl=^G:cr=^M:do=^J:\
:is=\017\035\E(B\E)0\E[?7h\E[?3h\E[>8g:kb=^H:kd=^J:\
:kl=^H:nw=^M^J:sf=^J:ta=^I:tc=rbcomm:
######## LCD DISPLAYS
#
#### Matrix Orbital
# from: Eric Z. Ayers (eric@ale.org)
#
# Matrix Orbital 20x4 LCD display
# Command Character is 0xFE (decimal 254, octal 376)
#
# On this device, cursor addressability isn't possible. The LCD expects:
# 0xfe G <col> <row>
# for cup: %p1 == row and %p2 is column
#
# This line:
# cup=\376G%p2%c%p1%c
# LOOKS like it will work, but sometimes only one of the two numbers is sent.
# See the terminfo (5) manpage commented regarding 'Terminals which use "%c"'.
#
# Alas, there is no cursor upline capability on this display.
#
# These entries add some 'sanity stuff' to the clear function. That is, it
# does a 'clear' and also turns OFF auto scroll, turns ON Auto Line Wrapping,
# and turns off the cursor blinking and stuff like that.
#
# NOTE: calling 'beep' turns on the backlight (bell)
# NOTE: calling 'flash' turns it on and back off (visual bell)
#
MtxOrb|Generic Matrix Orbital LCD display:\
:bl=\376B^A:cl=\376X\376C\376R\376K\376T:ho=\376H:\
:le=\376L:nd=\376M:vb=\376B\001\376F:ve=\376K\376T:
MtxOrb204|20x4 Matrix Orbital LCD display:\
:co#20:li#4:tc=MtxOrb:
MtxOrb162|16x2 Matrix Orbital LCD display:\
:co#16:li#2:tc=MtxOrb:
# The end
######## OLDER TERMINAL TYPES
#
# This section is devoted to older commercial terminal brands that are now
# discontinued, but known to be still in use or represented by emulations.
#
#### AT&T (att, tty)
#
# This section also includes Teletype-branded VDTs.
#
# The AT&T/Teletype terminals group was sold to SunRiver Data Systems (now
# Boundless Technologies); for details, see the header comment on the ADDS
# section.
#
# These are AT&T's official terminfo entries. All-caps aliases have been
# removed.
#
att2300|sv80|AT&T 2300 Video Information Terminal 80 column mode:\
:am:eo:mi:ms:xo:\
:co#80:it#8:li#24:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:F1=\E[11r:\
:F2=\E[12r:F3=\E[13r:F4=\E[14r:F5=\E[15r:F6=\E[16r:\
:IC=\E[%d@:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:al=\E[L:bl=^G:\
:cb=\E[1K:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:\
:cr=^M:dc=\E[P:dl=\E[M:do=^J:ei=\E[4l:ho=\E[H:im=\E[4h:\
:k1=\E[1r:k2=\E[2r:k3=\E[3r:k4=\E[4r:k5=\E[5r:k6=\E[6r:\
:k7=\E[7r:k8=\E[8r:k9=\E[9r:k;=\E[10r:kA=\E[L:kB=\E[Z:\
:kC=\E[J:kD=\E[P:kI=\E[@:kL=\E[M:kb=^H:kd=\E[B:kh=\E[H:\
:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:me=\E[m:mr=\E[7m:nd=\E[C:\
:pf=\E[4i:po=\E[5i:ps=\E[0i:se=\E[m:sf=^J:so=\E[7m:ta=^I:\
:up=\E[A:
att2350|AT&T 2350 Video Information Terminal 80 column mode:\
:pf@:po@:ps@:tc=att2300:
# Must setup RETURN KEY - CR, REC'VD LF - INDEX.
# Seems upward compatible with vt100, plus ins/del line/char.
# On sgr, the protection parameter is ignored.
# No check is made to make sure that only 3 parameters are output.
# standout= reverse + half-intensity = 3 | 5.
# bold= reverse + underline = 2 | 3.
# note that half-bright blinking doesn't look different from normal blinking.
# NOTE:you must program the function keys first, label second!
# (att4410: a BSD entry has been seen with the following capabilities:
# :is=\E[?6l:, :k1=\EOc:, :k2=\EOd:, :k3=\EOe:, :k4=\EOg:,
# :k6=\EOh:, :k7=\EOi:, :k8=\EOj:, -- esr)
att5410v1|att4410v1|tty5410v1|AT&T 4410/5410 80 columns - version 1:\
:am:hs:mi:ms:xo:\
:Nl#8:co#80:it#8:lh#2:li#24:lw#8:ws#80:\
:ac=++,,--..00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
:ae=^O:al=\E[L:as=^N:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\
:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:dc=\E[P:dl=\E[M:\
:do=\E[B:ei=:fs=\E8:ho=\E[H:i1=\E[?3l\E)0:\
:i2=\E[1;03q f1 \EOP\E[2;03q f2 \EOQ\E[3;03q f3 \EOR\E[4;03q f4 \EOS\E[5;03q f5 \EOT\E[6;03q f6 \EOU\E[7;03q f7 \EOV\E[8;03q f8 \EOW:\
:ic=\E[@:im=:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k5=\EOT:\
:k6=\EOU:k7=\EOV:k8=\EOW:kC=\E[2J:kH=\E[24;1H:kb=^H:\
:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:ll=\E[24H:\
:mb=\E[5m:md=\E[2;7m:me=\E[0m:mh=\E[2m:mk=\E[8m:mr=\E[7m:\
:nd=\E[C:nw=^M^J:rc=\E8:rs=\Ec\E[?3l\E[2;0y:sc=\E7:\
:se=\E[m:sf=^J:so=\E[7m:sr=\EM:ta=^I:ts=\E7\E[25;%+^AH:\
:ue=\E[m:up=\E[A:us=\E[4m:
att4410v1-w|att5410v1-w|tty5410v1-w|AT&T 4410/5410 132 columns - version 1:\
:co#132:ws#132:\
:i1=\E[?3h\E)0:rs=\Ec\E[?3h\E[2;0y:tc=att5410v1:
att4410|att5410|tty5410|AT&T 4410/5410 80 columns - version 2:\
:bs:tc=att5410v1:
att5410-w|att4410-w|4410-w|tty5410-w|5410-w|AT&T 4410/5410 in 132 column mode:\
:co#132:ws#132:\
:i1=\E[?3h\E)0:rs=\Ec\E[?3h\E[2;0y:tc=att4410:
# 5410 in terms of a vt100
# (v5410: added <rmam>/<smam> based on init string -- esr)
v5410|att5410 in terms of a vt100:\
:am:mi:ms:xo:\
:co#80:it#8:li#24:vt#3:\
:RA=\E[?7l:SA=\E[?7h:\
:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
:ae=^O:al=\E[L:as=^N:bl=^G:cb=3\E[1K:cd=50\E[J:ce=3\E[K:\
:cl=50\E[H\E[J:cm=5\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:eA=\E(B\E)0:ei=:ho=\E[H:\
:ic=\E[@:im=:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:kr=\EOC:\
:ks=\E[?1h\E=:ku=\EOA:le=^H:mb=2\E[5m:md=2\E[1m:me=2\E[0m:\
:mr=2\E[7m:nd=2\E[C:rc=\E8:\
:rs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:sc=\E7:se=2\E[m:\
:sf=^J:so=2\E[1;7m:sr=5\EM:st=\EH:ta=^I:ue=2\E[m:up=2\E[A:\
:us=2\E[4m:tc=vt100+fnkeys:
#
# Teletype Model 5420 -- A souped up 5410, with multiple windows,
# even! the 5420 has three modes: scroll, window or page mode
# this terminfo should work in scroll or window mode, but doesn't
# take advantage of any of the differences between them.
#
# Has memory below (2 lines!)
# 3 pages of memory (plus some spare)
# The 5410 sequences for :cm:, :vs:, :DC:, :DL:, :ec:, :vb:, :ho:,
# <hpa>, :st: would work for these, but these work in both scroll and window
# mode... Unset insert character so insert mode works
# :i1: sets 80 column mode,
# :is: escape sequence:
# 1) turn off all fonts
# 2) function keys off, keyboard lock off, control display off,
# insert mode off, erasure mode off,
# 3) full duplex, monitor mode off, send graphics off, nl on lf off
# 4) reset origin mode
# 5) set line wraparound
# 6) exit erasure mode, positional attribute mode, and erasure extent mode
# 7) clear margins
# 8) program ENTER to transmit ^J,
# We use \212 to program the ^J because a bare ^J will get translated by
# UNIX into a CR/LF. The enter key is needed for AT&T uOMS.
# 1 2 3 4 5 6 7 8
# :i3: set screen color to black,
# No representation in terminfo for the delete word key: kdw1=\Ed
# Key capabilities assume the power-up send sequence...
# This :te: is not strictly necessary, but it helps maximize
# memory usefulness: :te=\Ez:,
# Alternate sgr0: :me=\E[m\EW^O:,
# Alternate sgr: :sa=\E[%?%p1%t2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t^N%e^O%;:,
# smkx programs the SYS PF keys to send a set sequence.
# It also sets up labels f1, f2, ..., f8, and sends edit keys.
# This string causes them to send the strings :k1:-:k8:
# when pressed in SYS PF mode.
# (att4415: I added <rmam>/<smam> based on the init string -- esr)
att4415|tty5420|att5420|AT&T 4415/5420 80 cols:\
:bs:db:mi:xo:\
:Nl#8:lh#2:lm#78:lw#8:ws#55:\
:@1=\Et:@7=\Ez:@8=\Eent:AL=\E[%dL:CM=\E[%i%d;%dt:\
:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:LE=\E[%dD:LF=\E|:\
:LO=\E~:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:SF=\E[%dE:SR=\E[%dF:\
:UP=\E[%dA:bt=\E[Z:ch=\E[%+^AG:cl=\E[x\E[J:\
:cm=\E[%i%d;%dx:ct=\E[3g:cv=\E[%+^Ad:ec=\E[%ds\E[%dD:\
:ei=\E[4l:ho=\E[x:i1=100\E[?3l:i2=\E[?5l:ic@:im=\E[4h:\
:is=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[21;1j\212:\
:k1=\EOc:k2=\EOd:k3=\EOe:k4=\EOf:k5=\EOg:k6=\EOh:k7=\EOi:\
:k8=\EOj:kA=\E[L:kB=\E[Z:kD=\E[P:kE=\E[2K:kF=\E[T:kH=\Eu:\
:kI=\E[4h:kL=\E[M:kN=\E[U:kP=\E[V:kR=\E[S:\
:ke=\E[19;0j\E[21;1j\212:ks=\E[19;1j\E[21;4j\Eent:\
:l1=F1:l2=F2:l3=F3:l4=F4:l5=F5:l6=F6:l7=F7:l8=F8:ll=\Ew:\
:me=\E[0m\017:mp=\EV:pf=\E[?9i:po=\E[?4i:ps=\E[?2i:st=\EH:\
:ts=\E7\E[25;%+^HH:vb=\E[?5h\E[?5l:ve=\E[11;0j:\
:vs=\E[11;1j:tc=att4410:
att4415-w|tty5420-w|att5420-w|AT&T 4415/5420 132 cols:\
:co#132:lm#54:ws#97:\
:i1=100\E[?3h:tc=att4415:
att4415-rv|tty5420-rv|att5420-rv|AT&T 4415/5420 80 cols/rv:\
:i2=\E[?5h:vb=\E[?5l\E[?5h:tc=att4415:
att4415-w-rv|tty5420-w-rv|att5420-w-rv|AT&T 4415/5420 132 cols/rv:\
:co#132:lm#54:ws#97:\
:i1=100\E[?3h:i2=\E[?5h:vb=\E[?5l\E[?5h:tc=att4415:
# Note that this mode permits programming USER PF KEYS and labels
# However, when you program user pf labels you have to reselect
# user pf keys to make them appear!
att4415+nl|tty5420+nl|att5420+nl|generic AT&T 4415/5420 changes for not changing labels:\
:k1@:k2@:k3@:k4@:k5@:k6@:k7@:k8@:
att4415-nl|tty5420-nl|att5420-nl|AT&T 4415/5420 without changing labels:\
:k1@:k2@:k3@:k4@:k5@:k6@:k7@:k8@:tc=att4415+nl:tc=att4415:
att4415-rv-nl|tty5420-rv-nl|att5420-rv-nl|AT&T 4415/5420 reverse video without changing labels:\
:k1@:k2@:k3@:k4@:k5@:k6@:k7@:k8@:tc=att4415+nl:tc=att4415-rv:
att4415-w-nl|tty5420-w-nl|att5420-w-nl|AT&T 4415/5420 132 cols without changing labels:\
:k1@:k2@:k3@:k4@:k5@:k6@:k7@:k8@:tc=att4415+nl:tc=att4415-w:
att4415-w-rv-n|tty5420-w-rv-n|att5420-w-rv-n|AT&T 4415/5420 132 cols reverse without changing labels:\
:k1@:k2@:k3@:k4@:k5@:k6@:k7@:k8@:tc=att4415+nl:\
:tc=att4415-w-rv:
# (sgr removed to fit entry within 1023 bytes)
# (acsc removed to fit entry within 1023 bytes)
# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
att5420_2|AT&T 5420 model 2 80 cols:\
:am:db:hs:mi:ms:xo:\
:co#80:it#8:li#24:lm#78:ws#55:\
:AL=\E[%dL:CM=\E[%i%d;%dt:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:\
:IC=\E[%d@:LE=\E[%dD:RI=\E[%dC:SF=\E[%dE:SR=\E[%dF:\
:UP=\E[%dA:ae=^O:al=\E[L:as=^N:bt=\E[1Z:cd=\E[0J:ce=\E[0K:\
:cl=\EH\EJ:cm=\E[%i%d;%dH:cr=\EG:cs=\E[%i%d;%dr:ct=\E[3g:\
:dc=\E[P:dl=\E[M:do=\E[1B:ec=\E[%ds\E[%dD:ei=:fs=\E8:\
:ho=\E[H:\
:i1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;0j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r:\
:ic=\E[@:im=:k1=\EOc:k2=\EOd:k3=\EOe:k4=\EOf:k5=\EOg:\
:k6=\EOh:k7=\EOi:k8=\EOj:kD=\E[P:kH=\Eu:kI=\E[4h:kN=\E[U:\
:kP=\E[V:kb=^H:kd=\E[B:ke=\E[19;0j:kh=\E[H:kl=\E[D:kr=\E[C:\
:ks=\E[19;1j:ku=\E[A:le=^H:ll=\Ew:mb=\E[5m:me=\E[0m:\
:mh=\E[2m:mr=\E[7m:nd=\E[1C:nw=^M^J:rc=\E8:\
:rs=\Ec\E[?3l\E[2;0y:sc=\E7:se=\E[m:sf=^J:so=\E[7m:sr=\EM:\
:st=\EH:ta=^I:ts=\E7\E[25;%+^HH:ue=\E[m:up=\E[1A:us=\E[4m:\
:vb=\E[?5h\E[?5l:ve=\E[11;0j:vs=\E[11;1j:
att5420_2-w|AT&T 5420 model 2 in 132 column mode:\
:co#132:\
:i1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;1j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r:\
:tc=att5420_2:
att4418|att5418|AT&T 5418 80 cols:\
:am:xo:\
:co#80:li#24:\
:@8=\E[:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:F1=\E[n:\
:F2=\E[o:F3=\E[H:F4=\E[I:F5=\E[J:F8=\E[K:F9=\E[L:FA=\E[E:\
:FB=\E[_:FC=\E[M:FD=\E[N:FE=\E[O:IC=\E[%d@:LE=\E[%dD:\
:RI=\E[%dC:UP=\E[%dA:\
:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
:ae=^O:al=\E[1L:as=^N:bl=^G:cd=\E[0J:ce=\E[0K:cl=\E[H\E[2J:\
:cm=\E[%i%d;%dH:cr=^M:dc=\E[1P:dl=\E[M:do=\E[B:ei=:ho=\E[H:\
:i1=\E[?3l:ic=\E[1@:im=:is=\E)0\E?6l\E?5l:k1=\E[h:k2=\E[i:\
:k3=\E[j:k6=\E[k:k7=\E[l:k8=\E[f:k9=\E[w:k;=\E[m:kC=\E[%%:\
:kd=\EU:kh=\Ec:kl=\E@:kr=\EA:ku=\ES:le=\E[D:mb=\E[5m:\
:me=\E[m\017:mh=\E[2m:mr=\E[7m:nd=\E[C:rc=\E8:sc=\E7:\
:se=\E[m:sf=^J:so=\E[7m:ue=\E[m:up=\E[A:us=\E[4m:
att4418-w|att5418-w|AT&T 5418 132 cols:\
:co#132:\
:i1=\E[?3h:tc=att5418:
att4420|tty4420|teletype 4420:\
:bs:da:db:eo:ms:ul:xo:\
:co#80:li#24:lm#72:\
:al=\EL:bl=^G:cd=\EJ:ce=\Ez:cl=\EH\EJ:cm=\EY%+ %+ :cr=\EG:\
:dc=\EP:dl=\EM:dm@:do=\EB:ed@:ho=\EH:k0=\EU:k3=\E@:kA=\EL:\
:kB=\EO:kC=\EJ:kD=\EP:kF=\ES:kI=\E\136:kL=\EM:kR=\ET:kd=\EB:\
:kh=\EH:kl=^H:kr=\EC:ku=\EA:l0=segment advance:\
:l3=cursor tab:le=\ED:nd=\EC:se=\E~:sf=\EH\EM\EY7\040:\
:so=\E}:ue=\EZ:up=\EA:us=\E\\:
# The following is a terminfo entry for the Teletype 4424
# asynchronous keyboard-display terminal. It supports
# the vi editor. The terminal must be set up as follows,
#
# HIGHLIGHT DEFINITION 3-TONE
# DISPLAY FUNCTION GROUP III
#
# The second entry below provides limited (a la adm3a)
# operation under GROUP II.
#
# This must be used with DISPLAY FUNCTION GROUP I or III
# and HIGHLIGHT DEFINITION 3-TONE
# The terminal has either bold or blink, depending on options
#
# (att4424: commented out :ti:=\E[1m, we don't need bright locked on -- esr)
att4424|tty4424|teletype 4424:\
:am:bs:xo:\
:co#80:li#24:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:\
:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
:ae=\E(B:al=\EL:as=\E(0:bl=^G:bt=\EO:cd=\EJ:ce=\Ez:\
:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\EF:\
:dc=\EP:dl=\EM:do=\EB:ei=:ho=\E[H:ic=\E\136:im=:\
:is=\E[20l\E[?7h:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:kC=\EJ:\
:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mb=\E3:\
:md=\E3:me=\EX\E~\EZ\E4\E(B:mh=\EW:mr=\E}:nd=\EC:nw=\EE:\
:se=\E~:sf=^J:so=\E}:sr=\ET:st=\EH:ta=^I:ue=\EZ:up=\EA:\
:us=\E\\:
att4424-1|tty4424-1|teletype 4424 in display function group I:\
:kC@:kd=\EB:kh@:kl=\ED:kr=\EC:ku=\EA:tc=att4424:
# This entry is not one of AT&T's official ones, it was translated from the
# 4.4BSD termcap file. The highlight strings are different from att4424.
# I have no idea why this is -- older firmware version, maybe?
# The following two lines are the comment originally attached to the entry:
# This entry appears to avoid the top line - I have no idea why.
# From: jwb Wed Mar 31 13:25:09 1982 remote from ihuxp
att4424m|tty4424m|teletype 4424M:\
:am:da:db:mi:\
:co#80:it#8:li#23:\
:al=\EL:bl=^G:ce=\E[K:cl=\E[2;H\E[J:cm=\E[%i%2;%2H\E[B:\
:cr=^M:dc=\EP:dl=\EM:do=^J:ei=:ic=\E\136:im=:ip=2:\
:is=\E[m\E[2;24r:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:kb=^H:\
:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:me=\E[m:\
:nd=\E[C:nw=^M^J:se=\E[m:sf=^J:so=\E[7m:sr=\ET:ta=^I:\
:ue=\E[m:up=\E[A:us=\E[4m:
# The Teletype 5425 is really version 2 of the Teletype 5420. It
# is quite similar, except for some minor differences. No page
# mode, for example, so all of the :cm: sequences used above have
# to change back to what's being used for the 5410. Many of the
# option settings have changed their numbering as well.
#
# This has been tested on a preliminary model.
#
# (att5425: added <rmam>/<smam> based on the init string -- esr)
# (sgr removed to fit entry within 1023 bytes)
# (acsc removed to fit entry within 1023 bytes)
# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
att5425|tty5425|att4425|AT&T 4425/5425:\
:am:da:db:hs:mi:ms:xn:xo:\
:co#80:it#8:li#24:lm#78:ws#55:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
:LE=\E[%dD:RI=\E[%dC:SF=\E[%dE:SR=\E[%dF:UP=\E[%dA:ae=^O:\
:al=\E[L:as=^N:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\
:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:\
:dl=\E[M:do=^J:ec=\E[%ds\E[%dD:ei=\E[4l:fs=\E8:ho=\E[H:\
:i1=100\E<\E[?3l:i2=\E[?5l:im=\E[4h:\
:is=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[25;1j\212:\
:k1=\EOc:k2=\EOd:k3=\EOe:k4=\EOf:k5=\EOg:k6=\EOh:k7=\EOi:\
:k8=\EOj:kD=\E[P:kI=\E[4h:kb=^H:kd=\E[B:\
:ke=\E[21;0j\E[25;1j\212:kh=\E[H:kl=\E[D:kr=\E[C:\
:ks=\E[21;1j\E[25;4j\Eent\E~:ku=\E[A:le=^H:ll=\E[24H:\
:mb=\E[5m:md=\E[2;7m:me=\E[0m:mh=\E[2m:mr=\E[7m:nd=\E[C:\
:nw=^M^J:rc=\E8:rs=\Ec\E[?3l\E[2;0y:sc=\E7:se=\E[m:sf=^J:\
:so=\E[7m:sr=\EM:st=\EH:ta=^I:ts=\E7\E[25;%+^HH:ue=\E[m:\
:up=\E[A:us=\E[4m:vb=\E[?5h\E[?5l:ve=\E[12;0j:\
:vs=\E[12;1j:
att5425-nl|tty5425-nl|att4425-nl|AT&T 4425/5425 80 columns no labels:\
:ks=\E[21;1j\E[25;4j\Eent:tc=att4425:
att5425-w|att4425-w|tty5425-w|teletype 4425/5425 in 132 column mode:\
:co#132:lm#54:ws#97:\
:i1=100\E[?3h:tc=tty5425:
# (att4426: his had bogus capabilities: :ri=\EM:, :ri=\E[1U:.
# I also added <rmam>/<smam> -- esr)
att4426|tty4426|teletype 4426S:\
:am:da:db:xo:\
:co#80:li#24:lm#48:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
:LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:SF=\E[%dS:\
:SR=\E[%dT:UP=\E[%dA:\
:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
:ae=\E(B:al=\EL:as=\E(0:bl=^G:cd=\E[J:ce=\E[0K:ch=\E[%dG:\
:cl=\E[H\E[2J\E[1U\E[H\E[2J\E[1V:cm=\E[%i%d;%dH:cr=^M:\
:ct=\E[3g:cv=\E[%dd:dc=\EP:dl=\E[M:do=\E[B:ei=:ho=\E[H:\
:i1=\Ec\E[?7h:ic=\E\136:im=:is=\E[m\E[1;24r:k1=\EOP:\
:k2=\EOQ:k3=\EOR:k4=\EOS:k5=\EOT:k6=\EOU:k7=\EOV:k8=\EOW:\
:kB=\EO:kC=\E[2J:kH=\E[24;1H:kb=^H:kd=\EB:kh=\E[H:kl=\ED:\
:kr=\EC:ku=\EA:le=\E[D:ll=\E[24H:md=\E[5m:me=\E[m\E(B:\
:mr=\E[7m:nd=\E[C:nw=^M^J:rc=\E8:rs=\Ec\E[?3l\E[2;0y:\
:sc=\E7:se=\E[m:sf=^J:so=\E[5m:sr=\ET:st=\E1:ta=^I:ue=\E[m:\
:up=\E[A:us=\E[4m:
# Terminfo entry for the AT&T 510 A Personal Terminal
# Function keys 9 - 16 are available only after the
# screen labeled (soft keys/action blocks) are labeled. Function key
# 9 corresponds to the leftmost touch target on the screen,
# function key 16 corresponds to the rightmost.
#
# This entry is based on one done by Ernie Rice at Summit, NJ and
# changed by Anne Gallup, Skokie, IL, ttrdc!anne
att510a|bct510a|AT&T 510A Personal Terminal:\
:am:mi:ms:xn:xo:\
:Nl#8:co#80:lh#2:li#24:lw#7:\
:#4=\E[u:%i=\E[v:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:\
:F1=\EOe:F2=\EOf:F3=\EOg:F4=\EOh:F5=\EOi:F6=\EOj:LE=\E[%dD:\
:RI=\E[%dC:UP=\E[%dA:\
:ac=+g,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~:\
:ae=^O:al=\E[L:as=^N:bl=^G:bt=\E[Z:cb=\E[1K:cd=\E[0J:\
:ce=\E[0K:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:ct=\E[3g:\
:dc=\E[P:dl=\E[M:do=\E[B:eA=\E(B\E)1:ff=^L:ho=\E[H:\
:i1=\E(B\E)1\E[2l:i2=\E[21;1|\212:k1=\EOm:k2=\EOV:\
:k3=\EOu:k4=\ENj:k5=\ENe:k6=\ENf:k7=\ENh:k8=\E[H:k9=\EOc:\
:k;=\EOd:kB=\E[Z:kF=\E[S:kR=\E[T:kb=^H:kd=\E[B:ke=\E[19;0|:\
:kl=\E[D:kr=\E[C:ks=\E[19;1|:ku=\E[A:le=^H:mb=\E[5m:\
:md=\E[2;7m:me=\E[0m:mh=\E[2m:mr=\E[7m:nd=\E[C:nw=\EE:\
:pf=\E[?8i:po=\E[?4i:ps=\E[0i:rc=\E8:sc=\E7:se=\E[m:sf=^J:\
:so=\E[7m:sr=\EM:st=\EH:ta=^I:ue=\E[m:up=\E[A:us=\E[4m:\
:ve=\E[11;3|:vi=\E[11;0|:vs=\E[11;2|:
# Terminfo entry for the AT&T 510 D Personal Terminal
# Function keys 9 through 16 are accessed by bringing up the
# system blocks.
# Function key 9 corresponds to the leftmost touch target on the screen,
# function key 16 corresponds to the rightmost.
#
# There are problems with soft key labeling. These are due to
# strangenesses in the native terminal that are impossible to
# describe in a terminfo.
# (sgr removed to fit entry within 1023 bytes)
# (acsc removed to fit entry within 1023 bytes)
att510d|bct510d|AT&T 510D Personal Terminal:\
:am:da:db:mi:ms:xn:xo:\
:Nl#8:co#80:lh#2:li#24:lm#48:lw#7:\
:#4=\E[u:%i=\E[v:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:\
:F1=\EOe:F2=\EOf:F3=\EOg:F4=\EOh:F5=\EOi:F6=\EOj:IC=\E[%d@:\
:LE=\E[%dD:LF=\E<:LO=\E?:MC=\E\072:ML=\E4:MR=\E5:RI=\E[%dC:\
:RX=\E[29;1|:SF=\E[%dS:SR=\E[%dT:SX=\E[29;0|:UP=\E[%dA:\
:ae=^O:al=\E[L:as=^N:bl=^G:bt=\E[Z:cb=\E[1K:cd=\E[0J:\
:ce=\E[0K:ch=\E[%+^AG:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:\
:ct=\E[3g:cv=\E[%+^Ad:dc=\E[P:dl=\E[M:do=\E[B:eA=\E(B\E)1:\
:ei=\E[4l:ff=^L:ho=\E[H:i1=\E(B\E)1\E[5;0|:\
:i2=\E[21;1|\212:im=\E[4h:k1=\EOm:k2=\EOV:k3=\EOu:k4=\ENj:\
:k5=\ENe:k6=\ENf:k7=\ENh:k8=\E[H:k9=\EOc:k;=\EOd:kB=\E[Z:\
:kF=\E[S:kR=\E[T:kb=^H:kd=\E[B:ke=\E[19;0|:kl=\E[D:kr=\E[C:\
:ks=\E[19;1|:ku=\E[A:le=^H:ll=\E#2:mb=\E[5m:md=\E[2;7m:\
:me=\E[0m:mh=\E[2m:mk=\E[8m:mr=\E[7m:nd=\E[C:nw=\EE:\
:pf=\E[?8i:po=\E[?4i:ps=\E[0i:rc=\E8:rs=\E[5;0|:sc=\E7:\
:se=\E[m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:ue=\E[m:up=\E[A:\
:us=\E[4m:ve=\E[11;3|:vs=\E[11;2|:
# (att500: I merged this with the att513 entry, att500 just used att513 -- esr)
# (sgr removed to fit entry within 1023 bytes)
# (acsc removed to fit entry within 1023 bytes)
# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
att500|att513|AT&T 513 using page mode:\
:am:mi:ms:xn:xo:\
:co#80:li#24:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
:LE=\E[%dD:RI=\E[%dC:SF=\E[%dE:SR=\E[%dF:UP=\E[%dA:ae=^O:\
:al=\E[L:as=^N:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\
:cm=\E[%i%d;%dH:cr=^M:cs=%i\E[%d;%dr:ct=\E[3g:dc=1\E[P:\
:dl=\E[M:do=^J:ei=\E[4l:ho=\E[H:\
:i1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l:\
:im=\E[4h:k1=\EOc:k2=\EOd:k3=\EOe:k4=\EOf:k5=\EOg:k6=\EOh:\
:k7=\EOi:k8=\EOj:kD=\ENf:kI=\ENj:kN=\E[U:kP=\E[V:kb=^H:\
:kd=\E[B:ke=\E[19;0|\E[21;1|\212:kh=\E[H:kl=\E[D:kr=\E[C:\
:ks=\E[19;1|\E[21;4|\Eent:ku=\E[A:le=^H:ll=\E#2:mb=\E[5m:\
:md=\E[2;7m:me=\E[0m:mh=\E[2m:mr=\E[7m:nd=\E[C:nw=\EE:\
:rc=\E8:sc=\E7:se=\E[m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
:ue=\E[m:up=\E[A:us=\E[4m:ve=\E[11;0|:vs=\E[11;1|:
# 01-07-88
# printer must be set to EMUL ANSI to accept ESC codes
# :up: stops at top margin
# :i1: sets cpi 10,lpi 6,form 66,left 1,right 132,top 1,bottom 66,font
# and alt font ascii,wrap on,tabs cleared
# :is: disables newline on LF,Emphasized off
# The <u0> capability sets form length
att5310|att5320|AT&T Model 53210 or 5320 matrix printer:\
:YA:YD:\
:Ya#8192:Yi#10:Yj#12:Yk#100:Yl#72:Ym#120:co#132:it#8:li#66:\
:DO=\E[%de:RI=\E[%da:ZM=\E[5m:ZU=\E[m:Zl=\E[;%dr:\
:Zm=\E[%+^As:Zn=\E[;%+^As:Zp=\E[%dr:ch=\E[%d`:cr=^M:\
:cv=\E[%dd:do=^J:ff=^L:i1=\Ec:is=\E[20l\r:nd=\040:ta=^I:\
:u0=\E[%dt:up=\EM:
# Teletype 5620, firmware version 1.1 (8;7;3) or earlier from BRL
# The following SET-UP modes are assumed for normal operation:
# CR_DEF=CR NL_DEF=INDEX DUPLEX=FULL
# Other SET-UP modes may be set for operator convenience or communication
# requirements. This termcap description is for the Resident Terminal Mode.
# No delays specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
# The BRL entry also said: UNSAFE :ll=\E[70H:
att5620-1|tty5620-1|dmd1|Teletype 5620 with old ROMs:\
:am:xo:\
:co#88:it#8:li#70:vt#3:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:IC=\E[%d@:SF=\E[%dS:\
:SR=\E[%dT:al=\E[L:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\
:cm=\E[%i%d;%dH:cr=^M:dc=\E[P:dl=\E[M:do=^J:ei=:ho=\E[H:\
:ic=\E[@:im=:kC=\E[2J:kH=\E[70;1H:kb=^H:kd=\E[B:kh=\E[H:\
:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:nd=\E[C:nw=^M^J:r1=\Ec:\
:rc=\E8:sc=\E7:sf=^J:sr=\E[T:ta=^I:up=\E[A:
# 5620 terminfo (2.0 or later ROMS with char attributes)
# The following SET-UP modes are assumed for normal operation:
# DUPLEX=FULL GEN_FLOW=ON NEWLINE=INDEX RETURN=CR
# Other SET-UP modes may be set for operator convenience or communication
# requirements. This termcap description is for Resident Terminal Mode. No
# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
# assumptions: :sf: (scroll forward one line) is only done at screen bottom
# Be aware that older versions of the dmd have a firmware bug that affects
# parameter defaulting; for this terminal, the 0 in \E[0m is not optional.
# :ms: is from an otherwise inferior BRL for this terminal. That entry
# also has :ll:=\E[70H commented out and marked unsafe.
# For more, see the 5620 FAQ maintained by David Breneman <daveb@dgtl.com>.
att5620|dmd|tty5620|ttydmd|5620|5620 terminal 88 columns:\
:NL:NP:am:bs:ms:xo:\
:co#88:it#8:li#70:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:IC=\E[%d@:SF=\E[%dS:\
:SR=\E[%dT:al=\E[L:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\
:cm=\E[%i%d;%dH:cr=^M:dc=\E[P:dl=\E[M:do=\E[B:ei=:ho=\E[H:\
:ic=\E[@:im=:kC=\E[2J:kH=\E[70;1H:kb=^H:kd=\E[B:kh=\E[H:\
:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:md=\E[2m:me=\E[0m:mh=\E[2m:\
:mr=\E[7m:nd=\E[C:nw=^J:r1=\Ec:rc=\E8:sc=\E7:se=\E[0m:\
:sf=\E[S:so=\E[7m:sr=\E[T:ta=^I:ue=\E[0m:up=\E[A:us=\E[4m:
att5620-24|tty5620-24|dmd-24|teletype dmd 5620 in a 24x80 layer:\
:li#24:tc=att5620:
att5620-34|tty5620-34|dmd-34|teletype dmd 5620 in a 34x80 layer:\
:li#34:tc=att5620:
# 5620 layer running the "S" system's downloaded graphics handler:
att5620-s|tty5620-s|layer|vitty|5620 S layer:\
:am:bs:pt:\
:co#80:it#8:li#72:\
:al=\EI:bl=^G:ce=\EK:cl=^L:cm=\EY%r%+ %+ :cr=^M:dl=\ED:\
:do=^J:kC=\E[2J:kH=\E[70;1H:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:\
:kr=\E[C:ku=\E[A:le=^H:sf=^J:ta=^I:up=^K:vb=\E^G:
# Entries for <kf15> thru <kf28> refer to the shifted system pf keys.
#
# Entries for <kf29> thru <kf46> refer to the alternate keypad mode
# keys: = * / + 7 8 9 - 4 5 6 , 1 2 3 0 . ENTER
# (acsc removed to fit entry within 1023 bytes)
# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
att605|AT&T 605 80 column 102key keyboard:\
:am:eo:xo:\
:co#80:li#24:ws#80:\
:DC=\E[%dP:DL=\E[%dM:IC=\E[%d@:ae=^O:al=\E[L:as=\E)0\016:\
:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:\
:cr=^M:dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:fs=\E8:\
:i1=\E[8;0|\E[?\E[13;20l\E[?\E[12h:ic=\E[@:im=\E[4h:\
:is=\E[m\017:k1=\EOc:k2=\EOd:k3=\EOe:k4=\EOf:k5=\EOg:\
:k6=\EOh:k7=\EOi:k8=\EOj:k9=\ENo:kD=\E[P:kI=\E[@:kN=\E[U:\
:kP=\E[V:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:\
:le=^H:ll=\E[24H:mb=\E[5m:md=\E[1m:me=\E[m\017:mh=\E[2m:\
:mr=\E[7m:nd=\E[C:nw=\EE:rc=\E8:rs=\Ec\E[?3l:sc=\E7:\
:se=\E[m:sf=^J:so=\E[7m:ta=^I:ts=\E7\E[25;%i%dx:ue=\E[m:\
:up=\E[A:us=\E[4m:
att605-pc|ATT 605 in pc term mode:\
:@7=\E[F:S4=250\E[?11l\E[50;1|:S5=400\E[50;0|:XF=g:XN=e:\
:ac=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263:\
:al=\E[L:bt=\E[Z:dc=\E[P:dl=\E[M:do=\E[B:ei=:ic=\E[@:im=:\
:k1=\E[M:k2=\E[N:k3=\E[O:k4=\E[P:k5=\E[Q:k6=\E[R:k7=\E[S:\
:k8=\E[T:k9=\E[U:k;=\E[V:kB=\E[Z:kD=\E[P:kI=\E[@:kL=\E[M:\
:kN=\E[G:kP=\E[I:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:\
:le=\E[D:nd=\E[C:up=\E[A:tc=att605:
att605-w|AT&T 605-w 132 column 102 key keyboard:\
:co#132:ws#132:\
:i1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)0:\
:tc=att605:
# (att610: I added <rmam>/<smam> based on the init string. I also
# added :SF: and :SR: because the BSD file says the att615s have them,
# and the 615 is like a 610 with a big keyboard, and most of their other
# smart terminals support the same sequence -- esr)
# (sgr removed to fit entry within 1023 bytes)
# (acsc removed to fit entry within 1023 bytes)
# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
att610|AT&T 610; 80 column; 98key keyboard:\
:am:es:hs:mi:ms:xn:xo:\
:co#80:it#8:li#24:ws#80:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
:LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:ae=^O:\
:al=\E[L:as=^N:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\
:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:dc=\E[P:dl=\E[M:\
:do=\E[B:ei=\E[4l:fs=\E8:ho=\E[H:\
:i1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0:\
:i2=\E(B\E)0:im=\E[4h:is=\E[m\017:k1=\EOc:k2=\EOd:k3=\EOe:\
:k4=\EOf:k5=\EOg:k6=\EOh:k7=\EOi:k8=\EOj:k9=\ENo:kb=^H:\
:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:ll=\E[24H:\
:mb=\E[5m:md=\E[1m:me=\E[0m:mh=\E[2m:mr=\E[7m:nd=\E[C:\
:nw=\EE:rc=\E8:rs=\Ec\E[?3l:sc=\E7:se=\E[m:sf=\ED:so=\E[7m:\
:sr=\EM:ta=^I:ts=\E7\E[25;%i%dx:ue=\E[m:up=\E[A:us=\E[4m:\
:vb=\E[?5h\E[?5l:ve=\E[?25h\E[?12l:vi=\E[?25l:\
:vs=\E[?12;25h:
att610-w|AT&T 610; 132 column; 98key keyboard:\
:co#132:ws#132:\
:i1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h:\
:tc=att610:
att610-103k|AT&T 610; 80 column; 103key keyboard:\
:!1=\EOO:!2=\EOP:!3=\EOS:#1=\EOM:%0=\EOt:%1=\EOm:%2=\ENi:\
:%3=\EOl:%4=\ENc:%5=\ENh:%6=\EOv:%7=\EOr:%8=\ENg:%9=\EOz:\
:%a=\EOL:%b=\ENC:%c=\ENH:%d=\EOR:%e=\ENG:%f=\EOZ:%g=\EOT:\
:%h=\EOY:%j=\EOQ:&0=\EOW:&1=\EOb:&2=\ENa:&3=\EOy:&4=\EOB:\
:&5=\EOq:&6=\EOo:&7=\EOp:&8=\EOs:&9=\ENB:*0=\EOX:*1=\EOU:\
:*2=\END:*3=\EON:*4=\ENF:*5=\ENE:*6=\ENI:*7=\ENN:*8=\EOA:\
:*9=\EOK:@0=\EOx:@1=\E9:@2=\EOw:@3=\EOV:@4=\EOu:@5=\ENd:\
:@6=\EOn:@7=\E0:@8=^M:@9=\EOk:F1@:F2@:F3@:F4@:k9@:k;@:kD=\ENf:\
:kE=\EOa:kI=\ENj:kL=\ENe:kM=\ENj:kN=\E[U:kP=\E[V:tc=att610:
att610-103k-w|AT&T 610; 132 column; 103key keyboard:\
:co#132:ws#132:\
:i1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h:\
:tc=att610-103k:
att615|AT&T 615; 80 column; 98key keyboard:\
:#4=\E[ A:%i=\E[ @:F5=\EOC:F6=\EOD:F7=\EOE:F8=\EOF:F9=\EOG:\
:FA=\EOH:FB=\EOI:FC=\EOJ:FD=\ENO:FE=\ENP:FF=\ENQ:FG=\ENR:\
:FH=\ENS:FI=\ENT:FJ=\EOP:FK=\EOQ:FL=\EOR:FM=\EOS:FN=\EOw:\
:FO=\EOx:FP=\EOy:FQ=\EOm:FR=\EOt:FS=\EOu:FT=\EOv:FU=\EOl:\
:FV=\EOq:FW=\EOr:FX=\EOs:FY=\EOp:FZ=\EOn:Fa=\EOM:tc=att610:
att615-w|AT&T 615; 132 column; 98key keyboard:\
:#4=\E[ A:%i=\E[ @:F5=\EOC:F6=\EOD:F7=\EOE:F8=\EOF:F9=\EOG:\
:FA=\EOH:FB=\EOI:FC=\EOJ:FD=\ENO:FE=\ENP:FF=\ENQ:FG=\ENR:\
:FH=\ENS:FI=\ENT:FJ=\EOP:FK=\EOQ:FL=\EOR:FM=\EOS:FN=\EOw:\
:FO=\EOx:FP=\EOy:FQ=\EOm:FR=\EOt:FS=\EOu:FT=\EOv:FU=\EOl:\
:FV=\EOq:FW=\EOr:FX=\EOs:FY=\EOp:FZ=\EOn:Fa=\EOM:\
:tc=att610-w:
att615-103k|AT&T 615; 80 column; 103key keyboard:\
:#4=\E[ A:%i=\E[ @:tc=att610-103k:
att615-103k-w|AT&T 615; 132 column; 103key keyboard:\
:#4=\E[ A:%i=\E[ @:tc=att610-103k-w:
# (att620: I added <rmam>/<smam> based on the init string and
# :SR:/:SF: from a BSD termcap -- esr)
# (sgr removed to fit entry within 1023 bytes)
# (acsc removed to fit entry within 1023 bytes)
# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
att620|AT&T 620; 80 column; 98key keyboard:\
:am:es:hs:mi:ms:xn:xo:\
:co#80:it#8:li#24:ws#80:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
:LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:\
:ae=\E(B\017:al=\E[L:as=\E)0\016:bl=^G:bt=\E[Z:cd=\E[J:\
:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
:dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:fs=\E8:ho=\E[H:\
:i1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h:\
:i2=\E(B\E)0:im=\E[4h:is=\E[m\017:k1=\EOc:k2=\EOd:k3=\EOe:\
:k4=\EOf:k5=\EOg:k6=\EOh:k7=\EOi:k8=\EOj:k9=\ENo:kb=^H:\
:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:ll=\E[24H:\
:mb=\E[5m:md=\E[1m:me=\E[m\E(B\017:mh=\E[2m:mr=\E[7m:\
:nd=\E[C:nw=\EE:rc=\E8:rs=\Ec\E[?3l:sc=\E7:se=\E[m:sf=\ED:\
:so=\E[7m:sr=\EM:ta=^I:ts=\E7\E[25;%i%dx:ue=\E[m:up=\E[A:\
:us=\E[4m:vb=\E[?5h\E[?5l:ve=\E[?25h\E[?12l:vi=\E[?25l:\
:vs=\E[?12;25h:
att620-w|AT&T 620; 132 column; 98key keyboard:\
:co#132:ws#132:\
:i1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h:\
:tc=att620:
att620-103k|AT&T 620; 80 column; 103key keyboard:\
:!1=\EOO:!2=\EOP:!3=\EOS:#1=\EOM:%0=\EOt:%1=\EOm:%2=\ENi:\
:%3=\EOl:%4=\ENc:%5=\ENh:%6=\EOv:%7=\EOr:%8=\ENg:%9=\EOz:\
:%a=\EOL:%b=\ENC:%c=\ENH:%d=\EOR:%e=\ENG:%f=\EOZ:%g=\EOT:\
:%h=\EOY:%j=\EOQ:&0=\EOW:&1=\EOb:&2=\ENa:&3=\EOy:&4=\EOB:\
:&5=\EOq:&6=\EOo:&7=\EOp:&8=\EOs:&9=\ENB:*0=\EOX:*1=\EOU:\
:*2=\END:*3=\EON:*4=\ENF:*5=\ENE:*6=\ENI:*7=\ENN:*8=\EOA:\
:*9=\EOK:@0=\EOx:@1=\E9:@2=\EOw:@3=\EOV:@4=\EOu:@5=\ENd:\
:@6=\EOn:@7=\E0:@8=^M:@9=\EOk:F1@:F2@:F3@:F4@:F5@:F6@:F7@:F8@:\
:F9@:FA@:FB@:FC@:FD@:FE@:FF@:FG@:FH@:FI@:FJ@:FK@:FL@:FM@:FN@:FO@:FP@:\
:FQ@:FR@:FS@:FT@:FU@:FV@:FW@:FX@:FY@:FZ@:Fa@:k9@:k;@:kD=\ENf:\
:kE=\EOa:kI=\ENj:kL=\ENe:kM=\ENj:kN=\E[U:kP=\E[V:tc=att620:
att620-103k-w|AT&T 620; 132 column; 103key keyboard:\
:co#132:ws#132:\
:i1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h:\
:tc=att620-103k:
# AT&T (formerly Teletype) 630 Multi-Tasking Graphics terminal
# The following SETUP modes are assumed for normal operation:
# Local_Echo=Off Gen_Flow=On Return=CR Received_Newline=LF
# Font_Size=Large Non-Layers_Window_Cols=80
# Non-Layers_Window_Rows=60
# Other SETUP modes may be set for operator convenience or communication
# requirements. Some capabilities assume a printer attached to the Aux EIA
# port. This termcap description is for the Fixed Non-Layers Window. No
# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
# (att630: added :ic:, :mb: and :mh: from a BSD termcap file -- esr)
att630|AT&T 630 windowing terminal:\
:NP:am:bs:da:db:mi:ms:xo:\
:co#80:it#8:li#60:lm#0:\
:@8=^M:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:F1=\ENq:\
:F2=\ENr:F3=\ENs:F4=\ENt:F5=\ENu:F6=\ENv:F7=\ENw:F8=\ENx:\
:F9=\ENy:FA=\ENz:FB=\EN{:FC=\EN|:FD=\EN}:FE=\EN~:IC=\E[%d@:\
:LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:\
:al=\E[L:bl=^G:bt=\E[Z:cb=\E[1K:cd=\E[J:ce=\E[K:\
:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:dc=\E[P:dl=\E[M:do=\E[B:\
:ei=\E[4l:ho=\E[H:ic=\E[@:im=\E[4h:is=\E[m:k9=\ENo:k;=\ENp:\
:kA=\E[L:kB=\E[Z:kC=\E[2J:kD=\E[P:kI=\E[@:kL=\E[M:kb=^H:\
:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mb=\E[5m:\
:me=\E[m:mh=\E[2m:mr=\E[7m:nd=\E[C:nw=^M^J:pf=\E[?4i:\
:po=\E[?5i:rc=\E8:rs=\Ec:sc=\E7:se=\E[m:sf=\ED:so=\E[7m:\
:sr=\EM:ta=^I:ue=\E[m:up=\E[A:us=\E[4m:
att630-24|5630-24|5630DMD-24|630MTG-24|AT&T 630 windowing terminal 24 lines:\
:li#24:tc=att630:
# This is the att700 entry for 700 native emulation of the AT&T 700
# terminal. Comments are relative to changes from the 605V2 entry and
# att730 on which the entry is based. Comments show the terminfo
# capability name, termcap name, and description.
#
# Here is what's going onm in the init string:
# ESC [ 50;4| set 700 native mode (really is 605)
# x ESC [ 56;ps| set lines to 24: ps=0; 40: ps=1 (plus status line)
# ESC [ 53;0| set GenFlow to Xon/Xoff
# ESC [ 8 ;0| set CR on NL
# x ESC [ ? 3 l/h set workspace: 80 col(l); 132 col(h)
# ESC [ ? 4 l jump scroll
# ESC [ ? 5 l/h video: normal (l); reverse (h)
# ESC [ ?13 l Labels on
# ESC [ ?15 l parity check = no
# ESC [ 13 l monitor mode off
# ESC [ 20 l LF on NL (not CRLF on NL)
# ESC [ ? 7 h autowrap on
# ESC [ 12 h local echo off
# ESC ( B GO = ASCII
# ESC ) 0 G1 = Special Char & Line Drawing
# ESC [ ? 31 l Set 7 bit controls
#
# Note: Most terminals, especially the 600 family use Reverse Video for
# standout mode. DEC also uses reverse video. The VT100 uses bold in addition
# Assume we should stay with reverse video for 70.. However, the 605V2 exits
# standout mode with \E[m (all normal attributes). The 730 entry simply
# exits reverse video which would leave other current attributes intact. It
# was assumed the 730 entry to be more correct so rmso has changed. The
# 605V2 has no sequences to turn individual attributes off, thus its setting
# and the rmso/smso settings from the 730.
#
# Note: For the same reason as above in rmso I changed exit under-score mode
# to specifically turn off underscore, rather than return to all normal
# attributes
#
# Note: The following pkey_xmit is taken from the 605V2 which contained the
# capability as pfxl. It was changed here to pfx since pfxl
# will only compile successfully with Unix 4.0 tic. Also note that pfx only
# allows strings to be parameters and label values must be programmed as
# constant strings. Supposedly the pfxl of Version 4.0 allows both labels
# and strings to be parameters. The 605V2 pfx entry should be examined later
# in this regard. For reference the 730 pfxl entry is shown here for comparison
# 730 pfx entry:
# pfxl=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq\s\s\s
# SYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s,
#
# (for 4.0 tic)
# pfxl=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
#
# (for <4.0 tic)
# pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
#
# From the AT&T 705 Multi-tasking terminal user's guide Page 8-8,8-9
#
# Port1 Interface
#
# modular 10 pin Connector
# Left side Right side
# Pin 1 2 3 4 5 6 7 8 9 10
#
# Key (notch) at bottom
#
# Pin 1 DSR
# 3 DCD
# 4 DTR
# 5 Sig Ground
# 6 RD
# 7 SD
# 8 CTS
# 9 RTS
# 10 Frame Ground
#
# The manual is 189 pages and is loaded with details about the escape codes,
# etc..... Available from AT&T CIC 800-432-6600...
# ask for Document number 999-300-660..
#
# (sgr removed to fit entry within 1023 bytes)
# (acsc removed to fit entry within 1023 bytes)
# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
att700|AT&T 700 24x80 column display w/102key keyboard:\
:am:es:hs:mi:ms:xn:xo:\
:co#80:it#8:li#24:ws#80:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:ae=^O:al=\E[L:as=^N:bl=^G:\
:bt=\E[Z:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:\
:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:\
:fs=\E8:ho=\E[H:i2=\E(B\E)0:im=\E[4h:\
:is=\E[50;4|\E[53;0|\E[8;0|\E[?4;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0\E[?31l\E[0m\017:\
:k1=\EOc:k2=\EOd:k3=\EOe:k4=\EOf:k5=\EOg:k6=\EOh:k7=\EOi:\
:k8=\EOj:k9=\ENo:kD=\E[P:kI=\E[@:kN=\E[U:kP=\E[V:kb=^H:\
:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:ll=\E[24H:\
:mb=\E[5m:md=\E[1m:me=\E[0m:mh=\E[2m:mr=\E[7m:nd=\E[C:\
:nw=\EE:rc=\E8:sc=\E7:se=\E[27m:sf=\ED:so=\E[7m:sr=\EM:\
:st=\EH:ta=^I:ts=\E7\E[99;%i%dx:ue=\E[24m:up=\E[A:\
:us=\E[4m:vb=\E[?5h\E[?5l:ve=\E[?25h\E[?12l:vi=\E[?25l:\
:vs=\E[?12;25h:
# This entry was modified 3/13/90 by JWE.
# fixes include additions of <enacs>, correcting :rp:, and modification
# of <kHOM>. (See comments below)
# att730 has status line of 80 chars
# These were commented out: :SF=\E[%p1%dS:, :SR=\E[%p1%dT:,
# the <kf25> and up keys are used for shifted system Fkeys
# NOTE: JWE 3/13/90 The 98 key keyboard translation for shift/HOME is
# currently the same as :kh: (unshifted HOME or \E[H). On the 102, 102+1
# and 122 key keyboards, the 730's translation is \E[2J. For consistency
# <kHOM> has been commented out. The user can uncomment <kHOM> if using the
# 102, 102+1, or 122 key keyboards
# kHOM=\E[2J,
# (att730: I added <rmam>/<smam> based on the init string -- esr)
# (sgr removed to fit entry within 1023 bytes)
# (acsc removed to fit entry within 1023 bytes)
# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
att730|AT&T 730 windowing terminal:\
:am:da:db:es:hs:mi:ms:xn:xo:\
:co#80:it#8:li#60:lm#0:ws#80:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:ae=^O:al=\E[L:as=^N:bl=^G:\
:bt=\E[Z:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:\
:cs=\E[%i%d;%dr:dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:fs=\E8:\
:ho=\E[H:\
:i1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B:\
:i2=\E(B\E)0:im=\E[4h:is=\E[m\017:k1=\EOc:k2=\EOd:k3=\EOe:\
:k4=\EOf:k5=\EOg:k6=\EOh:k7=\EOi:k8=\EOj:k9=\ENo:kI=\E[@:\
:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:\
:mb=\E[5m:md=\E[1m:me=\E[0m:mh=\E[2m:mr=\E[7m:nd=\E[C:\
:nw=\EE:rc=\E8:rs=\Ec\E[?3l:sc=\E7:se=\E[27m:sf=\ED:\
:so=\E[7m:sr=\EM:ta=^I:ts=\E7\E[;%i%dx:ue=\E[24m:up=\E[A:\
:us=\E[4m:vb=\E[?5h\E[?5l:ve=\E[?25h\E[?12l:vi=\E[?25l:\
:vs=\E[?12;25h:
att730-41|730MTG-41|AT&T 730-41 windowing terminal Version:\
:li#41:tc=att730:
att730-24|730MTG-24|AT&T 730-24 windowing terminal Version:\
:li#24:tc=att730:
att730r|730MTGr|AT&T 730 rev video windowing terminal Version:\
:i1=\E[8;0|\E[?3;4;13;15l\E[?5h\E[13;20l\E[?7h\E[12h\E(B\E)B:\
:vb=\E[?5l\E[?5h:tc=att730:
att730r-41|730MTG-41r|AT&T 730r-41 rev video windowing terminal Version:\
:li#41:tc=att730r:
att730r-24|730MTGr-24|AT&T 730r-24 rev video windowing terminal Version:\
:li#24:tc=att730r:
# The following represents the screen layout along with the associated
# bezel buttons for the 5430/pt505 terminal. The "kf" designations do
# not appear on the screen but are shown to reference the bezel buttons.
# The "CMD", "MAIL", and "REDRAW" buttons are shown in their approximate
# position relative to the screen.
#
#
#
# +----------------------------------------------------------------+
# | |
# XXXX | kf0 kf24 | XXXX
# | |
# | |
# XXXX | kf1 kf23 | XXXX
# | |
# | |
# XXXX | kf2 kf22 | XXXX
# | |
# | |
# XXXX | kf3 kf21 | XXXX
# | |
# | |
# XXXX | kf4 kf20 | XXXX
# | |
# | |
# XXXX | kf5 kf19 | XXXX
# | |
# | |
# XXXX | kf6 kf18 | XXXX
# | |
# | |
# XXXX | | XXXX
# | |
# | |
# +----------------------------------------------------------------+
#
# XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX
#
# Note: XXXX represents the screen buttons
# CMD REDRAW
#
# MAIL
#
# version 1 note:
# The character string sent by key 'kf26' may be user programmable
# to send either \E[16s, or \E[26s.
# The character string sent by key 'krfr' may be user programmable
# to send either \E[17s, or \E[27s.
#
# Depression of the "CMD" key sends \E! (kcmd)
# Depression of the "MAIL" key sends \E[26s (kf26)
# "REDRAW" same as "REFRESH" (krfr)
#
# "kf" functions adds carriage return to output string if terminal is in
# 'new line' mode.
#
# The following are functions not covered in the table above:
#
# Set keyboard character (SKC): \EPn1;Pn2w
# Pn1= 0 Back Space key
# Pn1= 1 Break key
# Pn2= Program char (hex)
#
# Screen Definition (SDF): \E[Pn1;Pn2;Pn3;Pn4;Pn5t
# Pn1= Window number (1-39)
# Pn2-Pn5= Y;X;Y;X coordinates
#
# Screen Selection (SSL): \E[Pnu
# Pn= Window number
#
# Set Terminal Modes (SM): \E[Pnh
# Pn= 3 Graphics mode
# Pn= > Cursor blink
# Pn= < Enter new line mode
# Pn= = Enter reverse insert/replace mode
# Pn= ? Enter no scroll mode
#
# Reset Terminal Mode (RM): \E[Pnl
# Pn= 3 Exit graphics mode
# Pn= > Exit cursor blink
# Pn= < Exit new line mode
# Pn= = Exit reverse insert/replace mode
# Pn= ? Exit no scroll mode
#
# Screen Status Report (SSR): \E[Pnp
# Pn= 0 Request current window number
# Pn= 1 Request current window dimensions
#
# Device Status Report (DSR): \E[6n Request cursor position
#
# Call Status Report (CSR): \E[Pnv
# Pn= 0 Call failed
# Pn= 1 Call successful
#
# Transparent Button String (TBS): \E[Pn1;Pn2;Pn3;{string
# Pn1= Button number to be loaded
# Pn2= Character count of "string"
# Pn3= Key mode being loaded:
# 0= Unshifted
# 1= Shifted
# 2= Control
# String= Text string (15 chars max)
#
# Screen Number Report (SNR): \E[Pnp
# Pn= Screen number
#
# Screen Dimension Report (SDR): \E[Pn1;Pn2r
# Pn1= Number of rows available in window
# Pn2= Number of columns available in window
#
# Cursor Position Report (CPR): \E[Pn1;Pn2R
# Pn1= "Y" Position of cursor
# Pn2= "X" Position of cursor
#
# Request Answer Back (RAB): \E[c
#
# Answer Back Response (ABR): \E[?;*;30;VSV
# *= 0 No printer available
# *= 2 Printer available
# V= Software version number
# SV= Software sub version number
# (printer-available field not documented in v1)
#
# Screen Alignment Aid: \En
#
# Bell (lower pitch): \E[x
#
# Dial Phone Number: \EPdstring\
# string= Phone number to be dialed
#
# Set Phone Labels: \EPpstring\
# string= Label for phone buttons
#
# Set Clock: \EPchour;minute;second\
#
# Position Clock: \EPsY;X\
# Y= "Y" coordinate
# X= "X" coordinate
#
# Delete Clock: \Epr\
#
# Programming The Function Buttons: \EPfPn;string\
# Pn= Button number (00-06, 18-24)
# (kf00-kf06, kf18-kf24)
# string= Text to sent on button depression
#
# The following in version 2 only:
#
# Request For Local Directory Data: \EPp12;\
#
# Local Directory Data to host: \EPp11;LOCAL...DIRECTORY...DATA\
#
# Request for Local Directory Data in print format: \EPp13;\
#
# Enable 'Prt on Line' mode: \022 (DC2)
#
# Disable 'Prt on Line' mode: \024 (DC4)
#
# 05-Aug-86:
# The following Terminfo entry describes functions which are supported by
# the AT&T 5430/pt505 terminal software version 2 and later.
att505|pt505|att5430|gs5430|AT&T Personal Terminal 505 or 5430 GETSET terminal:\
:am:xo:\
:co#80:it#8:li#24:\
:&2=\E[27s:@4=\E!:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:\
:F8=\E[18s:F9=\E[19s:FA=\E[20s:FB=\E[21s:FC=\E[22s:\
:FD=\E[23s:FE=\E[24s:FG=\E[26s:LE=\E[%dD:RA=\E[11;1j:\
:RI=\E[%dC:SA=\E[11;0j:UP=\E[%dA:\
:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
:ae=\E[10m:al=\E[L:as=\E[11m:bl=^G:cb=\E[2K:cd=\E[0J:\
:ce=\E[0K:cl=\E[2J\E[H:cm=\E[%d;%dH:cr=^M:dc=\E[P:dl=\E[M:\
:do=\E[B:ei=\E[4l:ho=\E[H:\
:i1=\EPr\\E[0u\E[2J\E[0;0H\E[m\E[3l\E[<l\E[4l\E[>l\E[=l\E[?l:\
:im=\E[4h:k0=\E[00s:k1=\E[01s:k2=\E[02s:k3=\E[03s:\
:k4=\E[04s:k5=\E[05s:k6=\E[06s:kb=^H:kd=\E[B:kl=\E[D:\
:kr=\E[C:ku=\E[A:le=\E[D:mb=\E[5m:md=\E[1m:me=\E[m:\
:mr=\E[7m:nd=\E[C:pf=\E[4i:po=\E[5i:r1=\Ec:rc=\E8:sc=\E7:\
:se=\E[m:sf=^J:so=\E[1m:ta=^I:ue=\E[m:up=\E[A:us=\E[4m:\
:ve=\E[>l:vs=\E[>h:
# The following Terminfo entry describes functions which are supported by
# the AT&T 5430/pt505 terminal software version 1.
att505-24|pt505-24|gs5430-24|AT&T PT505 or 5430 GETSET version 1 24 lines:\
:li#24:\
:RA@:SA@:pf@:po@:rc@:sc@:tc=att505:
tt505-22|pt505-22|gs5430-22|AT&T PT505 or 5430 GETSET version 1 22 lines:\
:li#22:tc=att505:
#
#### ------------------ TERMINFO FILE CAN BE SPLIT HERE ---------------------
# This cut mark helps make life less painful for people running ncurses tic
# on machines with relatively little RAM. The file can be broken in half here
# cleanly and compiled in sections -- no `use' references cross this cut
# going forward.
#
#### Ampex (Dialogue)
#
# Yes, these are the same people who are better-known for making audio- and
# videotape. I'm told they are located in Redwood City, CA.
#
# From: <cbosg!ucbvax!SRC:george> Fri Sep 11 22:38:32 1981
# (ampex80: some capabilities merged in from SCO's entry -- esr)
ampex80|a80|d80|dialogue|dialogue80|ampex dialogue 80:\
:am:bs:bw:ul:\
:co#80:it#8:li#24:\
:al=5*\EE:bl=^G:bt=\EI:cd=\Ey:ce=\Et:cl=75\E*:cm=\E=%+ %+ :\
:cr=^M:ct=\E3:dc=\EW:dl=5*\ER:do=^J:ei=:ic=\EQ:im=:is=\EA:\
:le=^H:nd=^L:se=\Ek:sf=^J:so=\Ej:st=\E1:ta=^I:ue=\Em:up=^K:\
:us=\El:
# This entry was from somebody anonymous, Tue Aug 9 20:11:37 1983, who wrote:
ampex175|ampex d175:\
:am:\
:co#80:li#24:\
:al=\EE:bl=^G:cd=\Ey:ce=\Et:cl=\E+:cm=\E=%+ %+ :cr=^M:\
:dc=\EW:dl=\ER:do=^J:ei=:ho=^^:ic=\EQ:im=:is=\EX\EA\EF:\
:kA=\EE:kD=\EW:kI=\EQ:kL=\ER:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:\
:le=^H:ll=^^^K:nd=^L:se=\Ek:sf=^J:so=\Ej:te=\EF:ti=\EN:\
:ue=\Em:up=^K:us=\El:
# No backspace key in the main QWERTY cluster. Fortunately, it has a
# NEWLINE/PAGE key just above RETURN that sends a strange single-character
# code. Given a suitable Unix (one that lets you set an echo-erase-as-BS-SP-BS
# mode), this key can be used as the erase key; I find I like this. Because
# some people and some systems may not, there is another termcap ("ampex175")
# that suppresses this little eccentricity by omitting the relevant capability.
ampex175-b|ampex d175 using left arrow for erase:\
:kb=^_:tc=ampex175:
# From: Richard Bascove <atd!dsd!rcb@ucbvax.berkeley.edu>
# (ampex210: removed obsolete ":kn#10:" -- esr)
ampex210|a210|ampex a210:\
:am:bs:hs:xn:\
:co#80:it#8:li#24:sg#1:\
:al=\EE:bt=\EI:cd=\Ey:ce=\Et:cl=\E*:cm=\E=%+ %+ :dc=\EW:\
:dl=\ER:ei=:fs=\E.2:ho=^^:ic=\EQ:if=/usr/share/tabset/std:\
:im=:is=\EC\Eu\E'\E(\El\EA\E%\E{\E.2\EG0\Ed\En:\
:k0=^A0\r:k1=^A1\r:k2=^A2\r:k3=^A3\r:k4=^A4\r:k5=^A5\r:\
:k6=^A6\r:k7=^A7\r:k8=^A8\r:k9=^A9\r:kd=^V:kh=^^:kl=^H:\
:kr=^L:ku=^K:le=^H:mk@:nd=^L:ta=^I:ts=\E.0\Eg\E}\Ef:up=^K:\
:vb=\EU\EX\EU\EX\EU\EX\EU\EX:tc=adm+sgr:
# (ampex219: I added <rmam>/<smam> based on the init string, added :vs:
# from ampex219w, added :ve:=\E[?3l, irresistibly suggested by :vs:,
# and moved the padding to be *after* the caps -- esr)
ampex219|ampex-219|amp219|Ampex with Automargins:\
:hs:xn:\
:co#80:it#8:li#24:\
:RA=\E[?7l:SA=\E[?7h:bl=^G:bt=\E[Z:cd=50\E[J:ce=3\E[K:\
:cl=50\E[H\E[2J:cm=5\E[%i%d;%dH:cr=^M:cs=%i\E[%2;%2r:\
:do=\E[B:ho=\E[H:\
:is=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:k0=\E[21~:\
:k1=\E[7~:k2=\E[8~:k3=\E[9~:k4=\E[10~:k5=\E[11~:k6=\E[17~:\
:k7=\E[18~:k8=\E[19~:k9=\E[20~:kd=\E[B:ke=\E>:kh=\E[H:\
:kl=\E[D:kr=\E[C:ks=\E=:ku=\E[A:le=^H:mb=2\E[5m:md=2\E[1m:\
:me=2\E[m:mh=\E[1m:mr=\E[7m:nd=2\E[C:se=2\E[m:sf=^J:\
:so=2\E[7m:sr=5\EM:ta=^I:ue=2\E[m:up=2\E[A:us=2\E[4m:\
:ve=\E[?3l:vs=\E[?3h:
ampex219w|ampex-219w|amp219w|Ampex 132 cols:\
:co#132:li#24:\
:bl=^G:cr=^M:do=^J:is=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h:\
:sf=^J:tc=ampex219:
# (ampex232: removed :if=/usr/share/tabset/ampex:, no file and no :st: --esr)
ampex232|ampex-232|Ampex Model 232:\
:am:\
:co#80:li#24:sg#1:\
:al=5*\EE:bt=\EI:cd=\EY:ce=\ET:cl=\E+:cm=\E=%+ %+ :dc=\EW:\
:dl=5*\ER:do=^V:ei=:ic=\EQ:im=:is=\Eg\El:k0=^A@\r:k1=^AA\r:\
:k2=^AB\r:k3=^AC\r:k4=^AD\r:k5=^AE\r:k6=^AF\r:k7=^AG\r:\
:k8=^AH\r:k9=^AI\r:kb=^H:kd=^V:kh=^^:kl=^H:kr=^L:ku=^K:le=^H:\
:mk@:nd=^L:ta=^I:up=^K:vb=\Eb\Ed:ve=\E.4:vi=\E.0:tc=adm+sgr:
# (ampex: removed :if=/usr/share/tabset/amp-132:, no file and no :st: -- esr)
ampex232w|Ampex Model 232 / 132 columns:\
:co#132:li#24:\
:is=\E\034Eg\El:tc=ampex232:
#### Ann Arbor (aa)
#
# Ann Arbor made dream terminals for hackers -- large screen sizes and huge
# numbers of function keys. At least some used monitors in portrait mode,
# allowing up to 76-character screen heights! They were reachable at:
#
# Ann Arbor Terminals
# 6175 Jackson Road
# Ann Arbor, MI 48103
# (313)-663-8000
#
# But in 1996 the phone number reaches some kitschy retail shop, and Ann Arbor
# can't be found on the Web; I fear they're long dead. R.I.P.
#
# Originally from Mike O'Brien@Rand and Howard Katseff at Bell Labs.
# Highly modified 6/22 by Mike O'Brien.
# split out into several for the various screen sizes by dave-yost@rand
# Modifications made 3/82 by Mark Horton
# Modified by Tom Quarles at UCB for greater efficiency and more diversity
# status line moved to top of screen, :vb: removed 5/82
# Some unknown person at SCO then hacked the init strings to make them more
# efficient.
#
# assumes the following setup:
# A menu: 0000 1010 0001 0000
# B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
# C menu: 56 66 0 0 9600 0110 1100
# D menu: 0110 1001 1 0
#
# Briefly, the settings are for the following modes:
# (values are for bit set/clear with * indicating our preference
# and the value used to test these termcaps)
# Note that many of these settings are irrelevent to the terminfo
# and are just set to the default mode of the terminal as shipped
# by the factory.
#
# A menu: 0000 1010 0001 0000
# Block/underline cursor*
# blinking/nonblinking cursor*
# key click/no key click*
# bell/no bell at column 72*
#
# key pad is cursor control*/key pad is numeric
# return and line feed/return for :cr: key *
# repeat after .5 sec*/no repeat
# repeat at 25/15 chars per sec. *
#
# hold data until pause pressed/process data unless pause pressed*
# slow scroll/no slow scroll*
# Hold in area/don't hold in area*
# functions keys have default*/function keys disabled on powerup
#
# show/don't show position of cursor during page transmit*
# unused
# unused
# unused
#
# B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
# Baud rate (9600*)
#
# 2 bits of parity - 00=odd,01=even*,10=space,11=mark
# 1 stop bit*/2 stop bits
# parity error detection off*/on
#
# keyboard local/on line*
# half/full duplex*
# disable/do not disable keyboard after data transmission*
#
# transmit entire page/stop transmission at cursor*
# transfer/do not transfer protected characters*
# transmit all characters/transmit only selected characters*
# transmit all selected areas/transmit only 1 selected area*
#
# transmit/do not transmit line separators to host*
# transmit/do not transmit page tab stops tabs to host*
# transmit/do not transmit column tab stop tabs to host*
# transmit/do not transmit graphics control (underline,inverse..)*
#
# enable*/disable auto XON/XOFF control
# require/do not require receipt of a DC1 from host after each LF*
# pause key acts as a meta key/pause key is pause*
# unused
#
# unused
# unused
# unused
# unused
#
# XON character (17*)
# XOFF character (19*)
#
# C menu: 56 66 0 0 9600 0110 1100
# number of lines to print data on (printer) (56*)
#
# number of lines on a sheet of paper (printer) (66*)
#
# left margin (printer) (0*)
#
# number of pad chars on new line to printer (0*)
#
# printer baud rate (9600*)
#
# printer parity: 00=odd,01=even*,10=space,11=mark
# printer stop bits: 2*/1
# print/do not print guarded areas*
#
# new line is: 01=LF,10=CR,11=CRLF*
# unused
# unused
#
# D menu: 0110 1001 1 0
# LF is newline/LF is down one line, same column*
# wrap to preceding line if move left from col 1*/don't wrap
# wrap to next line if move right from col 80*/don't wrap
# backspace is/is not destructive*
#
# display*/ignore DEL character
# display will not/will scroll*
# page/column tab stops*
# erase everything*/erase unprotected only
#
# editing extent: 0=display,1=line*,2=field,3=area
#
# unused
#
annarbor4080|aa4080|ann arbor 4080:\
:am:bs:\
:co#80:li#40:\
:bl=^G:cl=2\014:cr=^M:ct=^\^P^P:do=^J:ho=^K:kb=^^:kd=^J:\
:kh=^K:kl=^H:kr=^_:ku=^N:le=^H:nd=^_:sf=^J:st=^]^P1:ta=^I:\
:up=^N:
# Strange Ann Arbor terminal from BRL
aas1901|Ann Arbor K4080 w/S1901 mod:\
:am:\
:co#80:li#40:\
:bl=^G:cl=^L:cr=^M:do=^J:ho=^K:kb=^H:kd=^J:kl=^H:le=^H:\
:ll=^O\200c:nd=^_:nw=^M^J:sf=^J:ta=^I:up=^N:
# If you're using the GNU termcap library, add
# :cS=\E[%p1%d;%p2%d;%p3%d;%p4%dp:
# to these capabilities. This is the nonstandard GNU termcap scrolling
# capability, arguments are:
# 1. Total number of lines on the screen.
# 2. Number of lines above desired scroll region.
# 3. Number of lines below (outside of) desired scroll region.
# 4. Total number of lines on the screen, the same as the first parameter.
# The generic Ann Arbor entry is the only one that uses this.
# (sgr removed to fit entry within 1023 bytes)
# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
aaa+unk|aaa-unk|ann arbor ambassador (internal - don't use this directly):\
:am:bs:km:mi:xo:\
:co#80:it#8:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=4*\E[%d@:\
:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:al=3\E[L:bl=^G:bt=\E[Z:\
:cd=\E[J:ce=5\E[K:cl=156\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:\
:ct=\E[3g:dc=\E[P:dl=\E[M:do=^K:ei=:ho=\E[H:\
:i1=\E[m\E7\E[H\E9\E8:i2=\E[1Q\E[>20;30l\EP`+x~M\E\\:\
:ic=4\E[@:im=:k1=\EOA:k2=\EOB:k3=\EOC:k4=\EOD:k5=\EOE:\
:k6=\EOF:k7=\EOG:k8=\EOH:k9=\EOI:kD=\E[P:kI=\E[@:kb=^H:\
:kd=\E[B:\
:ke=\EP`>y~[[J`8xy~[[A`4xy~[[D`6xy~[[C`2xy~[[B\E\\:\
:kh=\E[H:kl=\E[D:kr=\E[C:\
:ks=\EP`>z~[[J`8xz~[[A`4xz~[[D`6xz~[[C`2xz~[[B\E\\:\
:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[m:mm=\E[>52h:\
:mo=\E[>52l:mr=\E[7m:nd=\E[C:rc=\E8:sc=\E7:se=\E[m:sf=^K:\
:so=\E[7m:st=\EH:ta=^I:ue=\E[m:up=\E[A:us=\E[4m:
aaa+rv|ann arbor ambassador in reverse video:\
:i1=\E[7m\E7\E[H\E9\E8:mb=\E[5;7m:md=\E[1;7m:\
:me=\E[7m\016:mk=\E[7;8m:mr=\E[m:r1=156\E[H\E[7m\E[J:\
:se=\E[7m:so=\E[m:ue=\E[7m:us=\E[4;7m:
# Ambassador with the DEC option, for partial vt100 compatibility.
aaa+dec|ann arbor ambassador in dec vt100 mode:\
:ac=aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}:\
:ae=^N:as=^O:cs=\E[%i%d;%dr:eA=\E(0:
aaa-18|ann arbor ambassador/18 lines:\
:li#18:\
:is=\E7\E[60;0;0;18p\E8:te=\E[60;0;0;18p\E[60;1H\E[K:\
:ti=\E[18;0;0;18p:tc=aaa+unk:
aaa-18-rv|ann arbor ambassador/18 lines+reverse video:\
:tc=aaa+rv:tc=aaa-18:
aaa-20|ann arbor ambassador/20 lines:\
:li#20:\
:is=\E7\E[60;0;0;20p\E8:te=\E[60;0;0;20p\E[60;1H\E[K:\
:ti=\E[20;0;0;20p:tc=aaa+unk:
aaa-22|ann arbor ambassador/22 lines:\
:li#22:\
:is=\E7\E[60;0;0;22p\E8:te=\E[60;0;0;22p\E[60;1H\E[K:\
:ti=\E[22;0;0;22p:tc=aaa+unk:
aaa-24|ann arbor ambassador/24 lines:\
:li#24:\
:is=\E7\E[60;0;0;24p\E8:te=\E[60;0;0;24p\E[60;1H\E[K:\
:ti=\E[24;0;0;24p:tc=aaa+unk:
aaa-24-rv|ann arbor ambassador/24 lines+reverse video:\
:tc=aaa+rv:tc=aaa-24:
aaa-26|ann arbor ambassador/26 lines:\
:li#26:\
:is=\E7\E[60;0;0;26p\E8:te=\E[60;0;0;26p\E[26;1H\E[K:\
:ti=\E[H\E[J\E[26;0;0;26p:tc=aaa+unk:
aaa-28|ann arbor ambassador/28 lines:\
:li#28:\
:is=\E7\E[60;0;0;28p\E8:te=\E[60;0;0;28p\E[28;1H\E[K:\
:ti=\E[H\E[J\E[28;0;0;28p:tc=aaa+unk:
aaa-30-s|aaa-s|ann arbor ambassador/30 lines w/status:\
:es:hs:\
:li#29:\
:ds=\E7\E[60;0;0;30p\E[1;1H\E[K\E[H\E8\r\n\E[K:\
:fs=\E[>51l:is=\r\n\E[A\E7\E[60;1;0;30p\E8:\
:te=\E[60;1;0;30p\E[29;1H\E[K:\
:ti=\E[H\E[J\E[30;1;0;30p\E[30;1H\E[K:\
:ts=\E[>51h\E[1;%dH\E[2K:tc=aaa+unk:
aaa-30-s-rv|aaa-s-rv|ann arbor ambassador/30 lines+status+reverse video:\
:tc=aaa+rv:tc=aaa-30-s:
aaa-s-ctxt|aaa-30-s-ctxt|ann arbor ambassador/30 lines+status+save context:\
:te=\E[60;1;0;30p\E[59;1H\E[K:\
:ti=\E[30;1H\E[K\E[30;1;0;30p:tc=aaa-30-s:
aaa-s-rv-ctxt|aaa-30-s-rv-ct|ann arbor ambassador/30 lines+status+save context+reverse video:\
:te=\E[60;1;0;30p\E[59;1H\E[K:\
:ti=\E[30;1H\E[K\E[30;1;0;30p:tc=aaa-30-s-rv:
aaa|aaa-30|ambas|ambassador|ann arbor ambassador/30 lines:\
:li#30:\
:is=\E7\E[60;0;0;30p\E8:te=\E[60;0;0;30p\E[30;1H\E[K:\
:ti=\E[H\E[J\E[30;0;0;30p:tc=aaa+unk:
aaa-30-rv|aaa-rv|ann arbor ambassador/30 lines in reverse video:\
:tc=aaa+rv:tc=aaa-30:
aaa-30-ctxt|aaa-ctxt|ann arbor ambassador/30 lines; saving context:\
:te=\E[60;0;0;30p\E[60;1H\E[K:ti=\E[30;0;0;30p:\
:tc=aaa-30:
aaa-30-rv-ctxt|aaa-rv-ctxt|ann arbor ambassador/30 lines reverse video; saving context:\
:te=\E[60;0;0;30p\E[60;1H\E[K:ti=\E[30;0;0;30p:\
:tc=aaa+rv:tc=aaa-30:
aaa-36|ann arbor ambassador/36 lines:\
:li#36:\
:is=\E7\E[60;0;0;36p\E8:te=\E[60;0;0;36p\E[36;1H\E[K:\
:ti=\E[H\E[J\E[36;0;0;36p:tc=aaa+unk:
aaa-36-rv|ann arbor ambassador/36 lines+reverse video:\
:tc=aaa+rv:tc=aaa-36:
aaa-40|ann arbor ambassador/40 lines:\
:li#40:\
:is=\E7\E[60;0;0;40p\E8:te=\E[60;0;0;40p\E[40;1H\E[K:\
:ti=\E[H\E[J\E[40;0;0;40p:tc=aaa+unk:
aaa-40-rv|ann arbor ambassador/40 lines+reverse video:\
:tc=aaa+rv:tc=aaa-40:
aaa-48|ann arbor ambassador/48 lines:\
:li#48:\
:is=\E7\E[60;0;0;48p\E8:te=\E[60;0;0;48p\E[48;1H\E[K:\
:ti=\E[H\E[J\E[48;0;0;48p:tc=aaa+unk:
aaa-48-rv|ann arbor ambassador/48 lines+reverse video:\
:tc=aaa+rv:tc=aaa-48:
aaa-60-s|ann arbor ambassador/59 lines+status:\
:es:hs:\
:li#59:\
:ds=\E7\E[60;0;0;60p\E[1;1H\E[K\E[H\E8\r\n\E[K:\
:fs=\E[>51l:is=\r\n\E[A\E7\E[60;1;0;60p\E8:\
:ts=\E[>51h\E[1;%dH\E[2K:tc=aaa+unk:
aaa-60-s-rv|ann arbor ambassador/59 lines+status+reverse video:\
:tc=aaa+rv:tc=aaa-60-s:
aaa-60-dec-rv|ann arbor ambassador/dec mode+59 lines+status+rev video:\
:tc=aaa+dec:tc=aaa+rv:tc=aaa-60-s:
aaa-60|ann arbor ambassador/60 lines:\
:li#60:\
:is=\E7\E[60;0;0;60p\E[1Q\E[m\E[>20;30l\E8:tc=aaa+unk:
aaa-60-rv|ann arbor ambassador/60 lines+reverse video:\
:tc=aaa+rv:tc=aaa-60:
aaa-db|ann arbor ambassador 30/destructive backspace:\
:bs@:\
:i2=\E[1Q\E[m\E[>20l\E[>30h:le=\E[D:tc=aaa-30:
guru|guru-33|guru+unk|ann arbor guru/33 lines 80 cols:\
:li#33:\
:i2=\E[>59l:is=\E7\E[255;0;0;33;80;80p\E8\E[J:\
:te=\E[255p\E[255;1H\E[K:ti=\E[33p:vb=\E[>59h\E[>59l:\
:tc=aaa+unk:
guru+rv|guru changes for reverse video:\
:i2=\E[>59h:vb=\E[>59l\E[>59h:
guru-rv|guru-33-rv|ann arbor guru/33 lines+reverse video:\
:tc=guru+rv:tc=guru-33:
guru+s|guru status line:\
:es:hs:\
:ds=\E7\E[;0p\E[1;1H\E[K\E[H\E8\r\n\E[K:fs=\E[>51l:\
:te=\E[255;1p\E[255;1H\E[K:ti=:ts=\E[>51h\E[1;%dH\E[2K:
guru-nctxt|guru with no saved context:\
:ti=\E[H\E[J\E[33p\E[255;1H\E[K:tc=guru:
guru-s|guru-33-s|ann arbor guru/33 lines+status:\
:li#32:\
:is=\r\n\E[A\E7\E[255;1;0;33;80;80p\E8\E[J:\
:ti=\E[33;1p\E[255;1H\E[K:tc=guru+s:tc=guru+unk:
guru-24|ann arbor guru 24 lines:\
:co#80:li#24:\
:is=\E7\E[255;0;0;24;80;80p\E8\E[J:ti=\E[24p:\
:tc=guru+unk:
guru-44|ann arbor guru 44 lines:\
:co#97:li#44:\
:is=\E7\E[255;0;0;44;97;100p\E8\E[J:ti=\E[44p:\
:tc=guru+unk:
guru-44-s|ann arbor guru/44 lines+status:\
:li#43:\
:is=\r\n\E[A\E7\E[255;1;0;44;80;80p\E8\E[J:\
:ti=\E[44;1p\E[255;1H\E[K:tc=guru+s:tc=guru+unk:
guru-76|guru with 76 lines by 89 cols:\
:co#89:li#76:\
:is=\E7\E[255;0;0;76;89;100p\E8\E[J:ti=\E[76p:\
:tc=guru+unk:
guru-76-s|ann arbor guru/76 lines+status:\
:co#89:li#75:\
:is=\r\n\E[A\E7\E[255;1;0;76;89;100p\E8\E[J:\
:ti=\E[76;1p\E[255;1H\E[K:tc=guru+s:tc=guru+unk:
guru-76-lp|guru-lp|guru with page bigger than line printer:\
:co#134:li#76:\
:is=\E7\E[255;0;0;76;134;134p\E8\E[J:ti=\E[76p:\
:tc=guru+unk:
guru-76-w|guru 76 lines by 178 cols:\
:co#178:li#76:\
:is=\E7\E[255;0;0;76;178;178p\E8\E[J:ti=\E[76p:\
:tc=guru+unk:
guru-76-w-s|ann arbor guru/76 lines+status+wide:\
:co#178:li#75:\
:is=\r\n\E[A\E7\E[255;1;0;76;178;178p\E8\E[J:\
:ti=\E[76;1p\E[255;1H\E[K:tc=guru+s:tc=guru+unk:
guru-76-wm|guru 76 lines by 178 cols with 255 cols memory:\
:co#178:li#76:\
:is=\E7\E[255;0;0;76;178;255p\E8\E[J:ti=\E[76p:\
:tc=guru+unk:
aaa-rv-unk|ann arbor unknown type:\
:Nl#0:lh#0:lw#0:\
:ho=\E[H:i1=\E[7m\E7\E[H\E9\E8:mb=\E[5;7m:md=\E[1;7m:\
:me=\E[7m:mk=\E[7;8m:mr=\E[m:r1=\E[H\E[7m\E[J:se=\E[7m:\
:so=\E[m:ue=\E[7m:us=\E[4;7m:
#### Applied Digital Data Systems (adds)
#
# ADDS itself is long gone. ADDS was bought by NCR, and the same group made
# ADDS and NCR terminals. When AT&T and NCR merged, the engineering for
# terminals was merged again. Then AT&T sold the terminal business to
# SunRiver, which later changed its name to Boundless Technologies. The
# engineers from Teletype, AT&T terminals, ADDS, and NCR (who are still there
# as of early 1995) are at:
#
# Boundless Technologies
# 100 Marcus Boulevard
# Hauppauge, NY 11788-3762
# Vox: (800)-231-5445
# Fax: (516)-342-7378
# Web: http://boundless.com
#
# Their voice mail used to describe the place as "SunRiver (formerly ADDS)".
# In 1995 Boundless acquired DEC's terminals business.
#
# Regent: lowest common denominator, works on all regents.
# (regent: renamed ":bc:" to ":le:" -- esr)
regent|Adds Regent Series:\
:am:bs:\
:co#80:li#24:\
:bl=^G:cl=^L:cr=^M:do=^J:ho=\EY\040\040:le=^U:ll=^A:nd=^F:\
:sf=^J:up=^Z:
# Regent 100 has a bug where if computer sends escape when user is holding
# down shift key it gets confused, so we avoid escape.
regent100|Adds Regent 100:\
:sg#1:ug#1:\
:bl=^G:cm=\013%+ \020%B%.:k0=^B1\r:k1=^B2\r:k2=^B3\r:\
:k3=^B4\r:k4=^B5\r:k5=^B6\r:k6=^B7\r:k7=^B8\r:l0=F1:l1=F2:\
:l2=F3:l3=F4:l4=F5:l5=F6:l6=F7:l7=F8:me=\E0@:se=\E0@:so=\E0P:\
:ue=\E0@:us=\E0`:tc=regent:
regent20|Adds Regent 20:\
:bl=^G:cd=\Ek:ce=\EK:cm=\EY%+ %+ :tc=regent:
regent25|Adds Regent 25:\
:bl=^G:kd=^J:kh=^A:kl=^U:kr=^F:ku=^Z:tc=regent20:
regent40|Adds Regent 40:\
:sg#1:ug#1:\
:al=2*\EM:bl=^G:dl=2*\El:k0=^B1\r:k1=^B2\r:k2=^B3\r:\
:k3=^B4\r:k4=^B5\r:k5=^B6\r:k6=^B7\r:k7=^B8\r:l0=F1:l1=F2:\
:l2=F3:l3=F4:l4=F5:l5=F6:l6=F7:l7=F8:me=\E0@:se=\E0@:so=\E0P:\
:ue=\E0@:us=\E0`:tc=regent25:
regent40+|Adds Regent 40+:\
:is=\EB:tc=regent40:
regent60|regent200|Adds Regent 60:\
:dc=\EE:ei=\EF:im=\EF:is=\EV\EB:kD=\EE:kI=\EF:kM=\EF:\
:se=\ER\E0@\EV:so=\ER\E0P\EV:tc=regent40+:
# From: <edward@onyx.berkeley.edu> Thu Jul 9 09:27:33 1981
# (viewpoint: added :kr:, function key, and :dl: capabilities -- esr)
viewpoint|addsviewpoint|adds viewpoint:\
:am:bs:\
:co#80:li#24:\
:bl=^G:cd=16.1*\Ek:ce=16\EK:cl=^L:cm=\EY%+ %+ :cr=^M:\
:dl=\El:do=^J:is=\017\E0`:k0=^B1:k2=^B2:k3=^B!:k4=^B":\
:k5=^B#:kd=^J:kh=^A:kl=^U:kr=^F:ku=^Z:le=^H:ll=^A:me=^O:nd=^F:\
:se=^O:sf=^J:so=^N:ue=^O:up=^Z:us=^N:ve=\017\E0`:\
:vs=\017\E0P:
# Some viewpoints have bad ROMs that foo up on ^O
screwpoint|adds viewpoint with ^O bug:\
:se@:so@:ue@:us@:vs@:tc=viewpoint:
# From: Jay S. Rouman <jsr@dexter.mi.org> 5 Jul 92
# The :vi:/:ve:/:sa:/:me: strings were added by ESR from specs.
# Theory; the vp3a+ wants \E0%c to set highlights, where normal=01000000,
# underline=01100000, rev=01010000, blink=01000010,dim=01000001,
# invis=01000100 and %c is the logical or of desired attributes.
# There is also a `tag bit' enabling attributes, set by \E) and unset by \E(.
#
# Update by TD - 2004:
# Adapted from
# http://www.cs.utk.edu/~shuford/terminal/adds_viewpoint_news.txt
#
# COMMANDS ASCII CODE
#
# Address, Absolute ESC,=,row,column
# Beep BEL
# Aux Port Enable ESC,@
# Aux Port Disable ESC,A
# Backspace BS
# Cursor back BS
# Cursor down LF
# Cursor forward FF
# Cursor home RS
# Cursor up VT
# Cursor supress ETB
# Cursor enable CAN
# Erase to end of line ESC,T
# Erase to end of page ESC,Y
# Erase screen SUB
# Keyboard lock SI
# Keyboard unlock SO
# Read current cursor position ESC,?
# Set Attribute ESC,0,x (see below for values of x)
# Tag bit reset ESC,(
# Tag bit set ESC,)
# Transparent Print on ESC,3
# Transparent Print off ESC,4
#
#
# ATTRIBUTES
#
# Normal @ 0100
# Half Intensity A 0101
# Blinking B 0102
# Half Intensity Blinking C 0103
# Reverse Video P 0120
# Reverse Video Half Intensity Q 0121
# Reverse Video Blinking R 0122
# Reverse Video Half Intensity
# Blinking S 0123
# Underlined ` 0140
# Underlined Half Intensity a 0141
# Underlined Blinking b 0142
# Underlined Half Intensity
# Blinking c 0143
# Video suppress D 0104
vp3a+|viewpoint3a+|adds viewpoint 3a+:\
:am:bw:\
:co#80:it#8:li#24:\
:cd=80\EY:ce=\ET:cl=80\E*:cm=\E=%+ %+ :cr=^M:do=^J:ho=^^:\
:kb=^H:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:le=^H:mb=\E0B\E):me=\E(:\
:mh=\E0A\E):mk=\E0D\E):mr=\E0P\E):nd=^L:nw=^M^J:se=\E(:\
:sf=^J:so=\E0Q\E):ta=^I:up=^K:us=\E0`\E):ve=^X:vi=^W:
vp60|viewpoint60|addsvp60|adds viewpoint60:\
:tc=regent40:
#
# adds viewpoint 90 - from cornell
# Note: emacs sends ei occasionally to insure the terminal is out of
# insert mode. This unfortunately puts the viewpoint90 IN insert
# mode. A hack to get around this is :ic=\EF\s\EF^U:. (Also,
# - :ei=:im=: must be present in the termcap translation.)
# - :xs: indicates glitch that attributes stick to location
# - :ms: means it's safe to move in standout mode
# - :cl=\EG\Ek:: clears screen and visual attributes without affecting
# the status line
# Function key and label capabilities merged in from SCO.
vp90|viewpoint90|adds viewpoint 90:\
:bs:bw:ms:xs:\
:co#80:li#24:\
:cd=\Ek:ce=\EK:cl=\EG\Ek:cm=\EY%+ %+ :dc=\EE:dl=\El:do=^J:\
:ei=:ho=\EY\040\040:ic=\EF \EF\025:im=:k0=^B1\r:k1=^B2\r:\
:k2=^B3\r:k3=^B4\r:k4=^B5\r:k5=^B6\r:k6=^B7\r:k7=^B8\r:\
:k8=^B9\r:k9=^B\072\r:k;=^B;\r:kb=^H:kd=^J:kh=^A:kl=^U:\
:kr=^F:ku=^Z:l0=F1:l1=F2:l2=F3:l3=F4:l4=F5:l5=F6:l6=F7:l7=F8:\
:l8=F9:l9=F10:la=F11:le=^H:ll=^A:me=\ER\E0@\EV:nd=^F:\
:se=\ER\E0@\EV:sf=^J:so=\ER\E0Q\EV:ta=^I:ue=\ER\E0@\EV:\
:up=^Z:us=\ER\E0`\EV:
# Note: if return acts weird on a980, check internal switch #2
# on the top chip on the CONTROL pc board.
adds980|a980|adds consul 980:\
:am:bs:\
:co#80:li#24:\
:al=13\E\016:bl=^G:cl=\014\013@:cm=\013%+@\E\005%2:cr=^M:\
:dl=13\E\017:do=^J:k0=\E0:k1=\E1:k2=\E2:k3=\E3:k4=\E4:\
:k5=\E5:k6=\E6:k7=\E7:k8=\E8:k9=\E9:le=^H:me=^O:nd=\E^E01:\
:se=^O:sf=^J:so=^Y^^^N:
#### C. Itoh Electronics
#
# As of 1995 these people no longer make terminals (they're still in the
# printer business). Their terminals were all clones of the DEC VT series.
# They're located in Orange County, CA.
#
# CIT 80 - vt-52 emulator, the termcap has been modified to remove
# the delay times and do an auto tab set rather than the indirect
# file used in vt100.
cit80|cit-80|citoh 80:\
:am:bs:\
:co#80:li#24:\
:cd=\EJ:ce=\EK:cl=\E[H\EJ:cm=\E[%i%2;%2H:cr=^M:do=\E[B:\
:ff=^L:is=\E>:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:kr=\EOC:\
:ks=\E[?1h\E=:ku=\EOA:le=^H:nd=\E[C:sf=^J:up=\E[A:
# From: Tim Wood <mtxinu!sybase!tim> Fri Sep 27 09:39:12 PDT 1985
# (cit101: added <rmam>/<smam> based on init string, merged this with c101 -- esr)
cit101|citc|C.itoh fast vt100:\
:am:bs:xn:\
:co#80:li#24:\
:RA=\E[?7l:SA=\E[?7h:al=\E[L:bl=^G:cd=\E[J:ce=\E[K:\
:cl=\E[H\E[2J:cm=\E[%i%d;%dH:dc=\E[P:dl=\E[M:do=\E[B:ei=:\
:ic=\E[@:im=:\
:is=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[3g\E[>5g:\
:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:\
:ku=\EOA:le=^H:me=\E[m:nd=\E[C:se=\E[m:so=\E[7m:ue=\E[m:\
:up=\E[A:us=\E[4m:vb=\E[?5h\E[?5l:ve=\E[V\E8:vs=\E7\E[U:
# CIE Terminals CIT-101e from Geoff Kuenning <callan!geoff> via BRL
# The following termcap entry was created from the Callan cd100 entry. The
# last two lines (with the capabilities in caps) are used by RM-cobol to allow
# full selection of combinations of reverse video, underline, and blink.
# (cit101e: removed unknown :f0=\EOp:f1=\EOq:f2=\EOr:f3=\EOs:f4=\EOt:f5=\EOu:\
# f6=\EOv:f7=\EOw:f8=\EOx:f9=\EOy:AB=\E[0;5m:AL=\E[m:AR=\E[0;7m:AS=\E[0;5;7m:\
# :NB=\E[0;1;5m:NM=\E[0;1m:NR=\E[0;1;7m:NS=\E[0;1;5;7m: -- esr)
cit101e|C. Itoh CIT-101e:\
:am:bs:mi:ms:pt:\
:co#80:it#8:li#24:\
:ac=:ae=^O:al=\E[L:as=^N:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\
:cm=\E[%i%2;%2H:cs=\E[%i%2;%2r:dc=\E[P:dl=\E[M:do=\E[B:\
:ei=\E[4l:if=/usr/share/tabset/vt100:im=\E[4h:k0=\EOT:\
:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k5=\EOm:k6=\EOl:k7=\EOM:\
:k8=\EOn:kd=\E[B:ke=\E>:kl=\E[D:kr=\E[C:ks=\E=:ku=\E[A:\
:le=\E[D:nd=\E[C:rc=\E8:sc=\E7:se=\E[m:so=\E[7m:sr=\EM:\
:ue=\E[m:up=\E[A:us=\E[4m:ve=:vs=\E[?1l\E[?4l\E[?7h:
# From: David S. Lawyer, June 1997:
# The CIT 101-e was made in Japan in 1983-4 and imported by CIE
# Terminals in Irvine, CA. It was part of CITOH Electronics. In the
# late 1980's CIT Terminals went out of business.
# There is no need to use the initialization string is=... (by invoking
# tset or setterm etc.) provided that the terminal has been manually set
# up (and the setup saved with ^S) to be compatible with this termcap. To be
# compatible it should be in ANSI mode (not VT52). A set-up that
# works is to set all the manually setable stuff to factory defaults
# by pressing ^D in set-up mode. Then increse the brighness with the
# up-arrow key since the factory default will likely be dim on an old
# terminal. Then change any options you want (provided that they are
# compatible with the termcap). For my terminal I set: Screen
# Background: light; Keyclicks: silent; Auto wraparound: on; CRT saver:
# on. I also set up mine for parity (but you may not need it). Then
# save the setup with ^S.
# (cit101e-rv: added empty :te: to suppress a tic warning. --esr)
cit101e-rv|Citoh CIT-101e (sets reverse video):\
:am:eo:mi:ms:xn:xo:\
:co#80:it#8:li#24:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
:LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:\
:al=\E[L:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:ch=\E[%i%dG:\
:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
:ct=\E[3g:dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:ho=\E[H:ic=\E[@:\
:im=\E[4h:\
:is=\E<\E>\E[?1l\E[?3l\E[?4l\E[?5h\E[?7h\E[?8h\E[3g\E[>5g\E(B\E[m\E[20l\E[1;24r\E[24;1H:\
:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:kb=\177:kd=\E[B:kl=\E[D:\
:kr=\E[C:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[m:mr=\E[7m:\
:nd=\E[C:nl=\EM:nw=\EE:r1=\Ec\E[?7h\E[>5g:rc=\E8:sc=\E7:\
:se=\E[m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:te=:\
:ti=\E[>5g\E[?7h\E[?5h:u6=\E[%i%d;%dR:u7=\E[6n:\
:u8=\E[?6c:u9=\E[c:ue=\E[m:up=\E[A:us=\E[4m:\
:vb=200\E[?5l\E[?5h:ve=\E[0;3;4v:vi=\E[1v:vs=\E[3;5v:
cit101e-n|CIT-101e w/o am:\
:am@:\
:kb=^H:kd=^J:kl=^H:vs=\E[?1l\E[?4l\E[?7l:tc=cit101e:
cit101e-132|CIT-101e with 132 cols:\
:co#132:\
:kb=^H:kd=^J:kl=^H:tc=cit101e:
cit101e-n132|CIT-101e with 132 cols w/o am:\
:am@:\
:co#132:\
:kb=^H:kd=^J:kl=^H:vs=\E[?1l\E[?4l\E[?7l:tc=cit101e:
# CIE Terminals CIT-500 from BRL
# The following SET-UP modes are assumed for normal operation:
# GENERATE_XON/XOFF:YES DUPLEX:FULL NEWLINE:OFF
# AUTOWRAP:ON MODE:ANSI SCREEN_LENGTH:64_LINES
# DSPLY_CNTRL_CODES?NO PAGE_WIDTH:80 EDIT_MODE:OFF
# Other SET-UP modes may be set for operator convenience or communication
# requirements.
# Hardware tabs are assumed to be set every 8 columns; they can be set up
# by the "reset", "tset", or "tabs" utilities. No delays are specified; use
# "stty ixon -ixany" to enable DC3/DC1 flow control!
# (cit500: I added <rmam>/<smam> based on the init string -- esr)
cit500|CIE Terminals CIT-500:\
:bs:mi:ms:pt:xo:\
:co#80:it#8:kn#10:li#64:vt#3:\
:AL=\E[%dL:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:RA=\E[?7l:\
:RI=\E[%dC:SA=\E[?7h:UP=\E[%dA:ac=:ae=^O:al=\E[L:as=^N:\
:bl=^G:bt=\E[Z:cd=\EJ:ce=\EK:cl=\E[H\E[J:cm=\E[%i%d;%dH:\
:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:\
:ei=\E[4l:ho=\E[H:im=\E[4h:is=\E<\E)0:k0=\EOP:k1=\EOQ:\
:k2=\EOR:k3=\EOS:k4=\EOU:k5=\EOV:k6=\EOW:k7=\EOX:k8=\EOY:\
:k9=\EOZ:kA=\E[L:kB=\E[Z:kD=\E[P:kE=\EK:kI=\E[4h:kL=\E[M:\
:kM=\E[4l:kS=\EJ:kb=^H:kd=\EOB:ke=\E[?1l\E>:kh=\E[H:\
:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:l0=PF1:l1=PF2:l2=PF3:\
:l3=PF4:l4=F15:l5=F16:l6=F17:l7=F18:l8=F19:l9=F20:le=^H:\
:ll=\E[64H:mb=\E[5m:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:\
:nw=\EE:\
:r1=\E<\E2\E[20l\E[?6l\E[r\E[m\E[q\E(B\017\E)0\E>:\
:rc=\E8:sc=\E7:se=\E[m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
:ue=\E[m:up=\EM:us=\E[4m:
# C. Itoh printers begin here
citoh|ci8510|8510|c.itoh 8510a:\
:co#80:it#8:\
:is=\E(009,017,025,033,041,049,057,065,073.:le@:md=\E!:\
:me=\E"\EY:rp=\ER%r%3%.:sr=\Er:ue=\EY:us=\EX:tc=lpr:
citoh-pica|citoh in pica:\
:i1=\EN:tc=citoh:
citoh-elite|citoh in elite:\
:co#96:\
:i1=\EE:\
:is=\E(009,017,025,033,041,049,057,065,073,081,089.:\
:tc=citoh:
citoh-comp|citoh in compressed:\
:co#136:\
:i1=\EQ:\
:is=\E(009,017,025,033,041,049,057,065,073,081,089,097,105,113,121,129.:\
:tc=citoh:
# citoh has infinite cols because we don't want lp ever inserting \n\t**.
citoh-prop|citoh-ps|ips|citoh in proportional spacing mode:\
:co#32767:\
:i1=\EP:tc=citoh:
citoh-6lpi|citoh in 6 lines per inch mode:\
:i2=\EA:tc=citoh:
citoh-8lpi|citoh in 8 lines per inch mode:\
:li#88:\
:i2=\EB:tc=citoh:
#### Control Data (cdc)
#
cdc456|cdc 456 terminal:\
:am:bs:\
:co#80:li#24:\
:al=\EL:bl=^G:cd=^X:ce=^V:cl=^Y^X:cm=\E1%+ %+ :cr=^M:dl=\EJ:\
:do=^J:ho=^Y:le=^H:nd=^L:sf=^J:up=^Z:
# Assorted CDC terminals from BRL (improvements by DAG & Ferd Brundick)
cdc721|CDC Viking:\
:am:bs:\
:co#80:li#24:\
:ce=^K:cl=^L:cm=\002%r%+ %+ :ho=^Y:kd=^J:kh=^Y:kl=^H:kr=^I:\
:ku=^W:nd=^X:up=^W:
cdc721ll|CDC Vikingll:\
:am:bs:\
:co#132:li#24:\
:ce=^K:cl=^L:cm=\002%r%+ %+ :ho=^Y:kd=^J:kh=^Y:kl=^H:kr=^I:\
:ku=^W:nd=^X:up=^W:
# (cdc752: the BRL entry had :ll=\E1 ^Z: commented out
cdc752|CDC 752:\
:am:bs:bw:xs:\
:co#80:li#24:\
:bl=^G:ce=^V:cl=\030\E1\040\040:cm=\E1%r%+ %+ :cr=^M:\
:do=^J:ho=\E1\040\040:le=^H:ll=^Y:nd=^U:\
:r1=\E1 \030\002\003\017:sf=^J:up=^Z:
# CDC 756
# The following switch/key settings are assumed for normal operation:
# 96 chars SCROLL FULL duplex not BLOCK
# Other switches may be set according to communication requirements.
# Insert/delete-character cannot be used, as the whole display is affected.
# "so" & "se" are commented out until jove handles "sg" correctly.
cdc756|CDC 756:\
:am:bs:bw:\
:co#80:kn#10:li#24:\
:al=6*\EL:bl=^G:cd=^X:ce=^V:cl=^Y^X:cm=\E1%r%+ %+ :cr=^M:\
:dl=6*\EJ:do=^J:ho=^Y:k0=\EA:k1=\EB:k2=\EC:k3=\ED:k4=\EE:\
:k5=\EF:k6=\EG:k7=\EH:k8=\Ea:k9=\Eb:kA=\EL:kD=\EI:kE=^V:\
:kI=\EK:kL=\EL:kS=^X:kT=^O:kb=^H:kd=^J:kh=^Y:kl=^H:kr=^U:\
:ku=^Z:l0=F1:l1=F2:l2=F3:l3=F4:l4=F5:l5=F6:l6=F7:l7=F8:l8=F9:\
:l9=F10:le=^H:ll=^Y^Z:nd=^U:r1=\031\030\002\003\017:sf=^J:\
:up=^Z:
#
# CDC 721 from Robert Viduya, Ga. Tech. <ihnp4!gatech!gitpyr!robert> via BRL.
#
# Part of the long initialization string defines the "DOWN" key to the left
# of the tab key to send an ESC. The real ESC key is positioned way out
# in right field.
#
# The termcap won't work in 132 column mode due to the way it it moves the
# cursor. Termcap doesn't have the capability (as far as I could tell) to
# handle the 721 in 132 column mode.
#
# (cdc721: changed :ri: to :sr: -- esr)
cdc721-esc|Control Data 721:\
:am:bs:bw:ms:pt:xo:\
:co#80:it#8:kn#10:li#30:\
:al=^^R:bl=^G:bt=^^^K:cd=^^P:ce=^K:cl=^L:cm=\002%r%+ %+ :\
:ct=^^^RY:dc=^^N:dl=^^Q:do=^Z:ei=:ho=^Y:ic=^^O:im=:\
:is=\036\022B\003\036\035\017\022\025\035\036E\036\022H\036\022J\036\022L\036\022N\036\022P\036\022Q\036\022\036\022\136\036\022b\036\022i\036W =\036\022Z\036\011C1-` `!k/o:\
:k0=^^q:k1=^^r:k2=^^s:k3=^^t:k4=^^u:k5=^^v:k6=^^w:k7=^^x:\
:k8=^^y:k9=^^z:kb=^H:kd=^Z:ke=^^^Rl:kh=^Y:kl=^H:kr=^X:\
:ks=^^^Rk:ku=^W:le=^H:ll=^B =:mb=^N:\
:me=\017\025\035\036E\036\022\\:mh=^\:mk=^^^R[:mr=^^D:\
:nd=^X:se=^^E:sf=\036W =\036U:so=^^D:sr=\036W =\036V:\
:st=^^^RW:ue=^]:up=^W:us=^\:
#### Getronics
#
# Getronics is a Dutch electronics company that at one time was called
# `Geveke' and made async terminals; but (according to the company itself!)
# they've lost all their documentation on the command set. The hardware
# documentation suggests the terminals were actually manufactured by a
# Taiwanese electronics company named Cal-Comp. There are known
# to have been at least two models, the 33 and the 50.
#
# The 50 seems to be a top end vt220 clone, with the addition of a higher
# screen resolution, a larger screen, at least 1 page of memory above and
# below the screen, apparently pages of memory right and left of the screen
# which can be panned, and about 75 function keys (15 function keys x normal,
# shift, control, func A, func B). It also has more setup possibilities than
# the vt220. The monitor case is dated November 1978 and the keyboard case is
# May 1982.
#
# The vt100 emulation works as is. The entry below describes the rather
# non-conformant (but more featureful) ANSI mode.
#
# From: Stephen Peterson <stv@utrecht.ow.nl>, 27 May 1995
# (acsc removed to fit entry within 1023 bytes)
visa50|geveke visa 50 terminal in ansi 80 character mode:\
:bw:mi:ms:\
:co#80:li#25:\
:AL=\E[%dL:DC=\E[%dX:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
:K1=\E[f:K2=\EOP:K3=\EOQ:K4=\EOR:K5=\EOS:LE=\E[%dD:\
:RA=\E[?7l:RI=\E[%dC:SA=\E?7h:UP=\E[%dA:ae=\E[3l:al=\E[L:\
:as=\E3h:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:ch=\E[%i%dG:\
:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
:ct=\E[3g:cv=\E[%i%dd:dc=\E[X:dl=\E[M:do=\E[B:ei=\E[4l:\
:ho=\E[H:ic=\E[@:im=\E[4h:\
:is=\E0;2m\E[1;25r\E[25;1H\E[?3l\E[?7h\E[?8h:k0=\E010:\
:k1=\E001:k2=\E002:k3=\E003:k4=\E004:k5=\E005:k6=\E006:\
:k7=\E007:k8=\E008:k9=\E009:k;=\E011:kD=\177:kL=\EOS:kb=^H:\
:kd=\E[A:ke=\E>:kh=\E[f:kl=\E[D:kr=\E[C:ks=\E=:ku=\E[A:\
:l2=A delete char:l3=A insert line:l4=A delete line:\
:l5=A clear:l6=A ce of/cf gn:l7=A print:l8=A on-line:\
:l9=A funcl0=A send:le=\E[D:mb=\E[5m:md=\E[1m:me=\E[0;2m:\
:mh=\E[2m:mk=\E[8m:mr=\E[7m:nd=\E[C:nw=^M^J:se=\E[0;2m:\
:sf=^J:so=\E[2;7m:ta=^I:ue=\E[0m:up=\E[A:us=\E[4m:\
:vb=\E[?5h\E[?5l:
#### Human Designed Systems (Concept)
#
# Human Designed Systems
# 400 Fehley Drive
# King of Prussia, PA 19406
# Vox: (610)-277-8300
# Fax: (610)-275-5739
# Net: support@hds.com
#
# John Martin <john@hds.com> is their termcap expert. They're mostly out of
# the character-terminal business now (1995) and making X terminals. In
# particular, the whole `Concept' line described here was discontinued long
# ago.
#
# From: <vax135!hpk> Sat Jun 27 07:41:20 1981
# Extensive changes to c108 by arpavax:eric Feb 1982
# Some unknown person at SCO then translated it to terminfo.
#
# There seem to be a number of different versions of the C108 PROMS
# (with bug fixes in its Z-80 program).
#
# The first one that we had would lock out the keyboard of you
# sent lots of short lines (like /usr/dict/words) at 9600 baud.
# Try that on your C108 and see if it sends a ^S when you type it.
# If so, you have an old version of the PROMs.
#
# You should configure the C108 to send ^S/^Q before running this.
# It is much faster (at 9600 baud) than the c100 because the delays
# are not fixed.
# new status line display entries for c108-8p:
# :i3: - init str #3 - setup term for status display -
# set programmer mode, select window 2, define window at last
# line of memory, set bkgnd stat mesg there, select window 0.
#
# :ts: - to status line - select window 2, home cursor, erase to
# end-of-window, 1/2 bright on, goto(line#0, col#?)
#
# :fs: - from status line - 1/2 bright off, select window 0
#
# :ds: - disable status display - set bkgnd status mesg with
# illegal window #
#
# There are probably more function keys that should be added but
# I don't know what they are.
#
# No delays needed on c108 because of ^S/^Q handshaking
#
c108|concept108|c108-8p|concept108-8p|concept 108 w/8 pages:\
:i2=\EU\E z"\Ev\001\177 !p\E ;"\E z \Ev \001\177p\Ep\n:\
:te=\Ev \001\177p\Ep\r\n:tc=c108-4p:
c108-4p|concept108-4p|concept 108 w/4 pages:\
:bs:es:hs:xo:\
:pb@:\
:ac=jEkTl\\mMqLxU:ae=\Ej\040:as=\Ej!:cr=^M:dc=16*\E 1:\
:ds=\E ;\177:fs=\Ee\E z\040:i1=\EK\E!\E F:\
:i2=\EU\E z"\Ev\177 !p\E ;"\E z \Ev \001 p\Ep\n:\
:sf=^J:te=\Ev \001 p\Ep\r\n:ti=\EU\Ev 8p\Ep\r\E\025:\
:ve=\Ew:vs=\EW:tc=c100:
c108-rv|c108-rv-8p|concept 108 w/8 pages in reverse video:\
:te=\Ev \002 p\Ep\r\n:ti=\EU\Ev 8p\Ep\r:\
:tc=c108-rv-4p:
c108-rv-4p|concept108rv4p|concept 108 w/4 pages in reverse video:\
:i1=\Ek:se=\Ee:so=\EE:vb=\EK\Ek:tc=c108-4p:
c108-w|c108-w-8p|concept108-w-8|concept108-w8p|concept 108 w/8 pages in wide mode:\
:co#132:\
:i1=\E F\E":te=\Ev ^A0\001D\Ep\r\n:\
:ti=\EU\Ev 8\001D\Ep\r:tc=c108-8p:
# Concept 100:
# These have only window relative cursor addressing, not screen
# relative. To get it to work right here, smcup/rmcup (which
# were invented for the concept) lock you into a one page
# window for screen style programs.
#
# To get out of the one page window, we use a clever trick:
# we set the window size to zero ("\Ev " in rmcup) which the
# terminal recognizes as an error and resets the window to all
# of memory.
#
# This trick works on c100 but does not on c108, sigh.
#
# Some tty drivers use cr3 for concept, others use nl3, hence
# the delays on cr and ind below. This padding is only needed at
# 9600 baud and up. One or the other is commented out depending on
# local conventions.
#
# 2 ms padding on :te: isn't always enough. 6 works fine. Maybe
# less than 6 but more than 2 will work.
#
# Note: can't use function keys f7-f10 because they are
# indistinguishable from arrow keys (!), also, del char and
# clear eol use xon/xoff so they probably won't work very well.
#
# Also note that we don't define insrt/del char/delline/eop/send
# because they don't transmit unless we reset them - I figured
# it was a bad idea to clobber their definitions.
#
# The <mc5> sequence changes the escape character to ^^ so that
# escapes will be passed through to the printer. Only trouble
# is that ^^ won't be - ^^ was chosen to be unlikely.
# Unfortunately, if you're sending raster bits through to be
# plotted, any character you choose will be likely, so we lose.
#
# \EQ"\EY(^W (send anything from printer to host, for xon/xoff)
# cannot be # in is2 because it will hang a c100 with no printer
# if sent twice.
c100|concept100|concept|c104|c100-4p|hds concept 100:\
:am:bs:eo:mi:ul:xn:\
:co#80:li#24:pb#9600:vt#8:\
:al=3*\E\022:bl=^G:cd=16*\E\005:ce=16\E\025:\
:cl=2*\E?\E\005:cm=\Ea%+ %+ :cr=\r:dc=16*\E\021:\
:dl=3*\E\002:do=^J:ei=\E\040\040:i1=\EK:i2=\Ev \Ep\n:\
:im=\E^P:ip=16*:\
:is=\EU\Ef\E7\E5\E8\El\ENH\E\200\Eo&\200\Eo'\E\Eo!\200\E\007!\E\010A@ \E4#\072"\E\072a\E4#;"\E\072b\E4#<"\E\072c:\
:k1=\E5:k2=\E6:k3=\E7:k4=\E8:k5=\E9:k6=\E\072a:k7=\E\072b:\
:k8=\E\072c:kA=\E^R:kB=\E':kD=\E^Q:kE=\E^S:kF=\E[:kI=\E^P:\
:kL=\E^B:kM=\E\200:kN=\E-:kP=\E.:kR=\E\\:kS=\E^C:kT=\E]:\
:kb=^H:kd=\E<:ke=\Ex:kh=\E?:kl=\E>:kr=\E=:ks=\EX:kt=\E_:\
:ku=\E;:le=^H:mb=\EC:me=\EN@:mh=\EE:mk=\EH:mp=\EI:mr=\ED:\
:nd=\E=:pf=\036o \E\EQ!\EYP\027:\
:po=\EQ"\EY(\027\EYD\Eo \036:rp=.2*\Er%.%+ :se=\Ed:\
:sf=^J:so=\ED:ta=8\011:te=\Ev \Ep\r\n:\
:ti=16\EU\Ev 8p\Ep\r\E\025:ue=\Eg:up=\E;:us=\EG:\
:vb=\Ek\EK:
c100-rv|c100-rv-4p|concept100-rv|c100 rev video:\
:i1=\Ek:se=\Ee:so=\EE:vb=\EK\Ek:ve@:vs@:tc=c100:
oc100|oconcept|c100-1p|old 1 page concept 100:\
:in:\
:i3@:tc=c100:
# From: Walter Skorski <walt@genetics1.JMP.TJU.EDU>, 16-oct-1996.
# Lots of notes, originally inline, but ncurses doesn't grok that.
#
# am: not available in power on mode, but turned on with \E[=107;207h in
# is2=. Also, \E=124l in is2= could have been used to prevent needing
# to specify xenl:, but that would have rendered the last space on the
# last line useless.
# bw: Not available in power on mode, but turned on with \E[=107;207h in
# is2=.
# clear: Could be done with \E[2J alone, except that vi (and probably most
# other programs) assume that this also homes the cursor.
# dsl: Go to window 2, go to the beginning of the line, use a line feed to
# scroll the window, and go back to window 1.
# is2: the string may cause a warning to be issued by tic that it
# found a very long line and that it suspects that a comma is missing
# somewhere. This warning can be ignored (unless it comes up more than
# once). The initialization string contains the following commands:
#
# [Setup mode items changed from factory defaults:]
# \E)0 set alternate character set to
# graphics
# ^O set character set to default
# [In case it wasn't]
# \E[m turn off all attributes
# [In case they weren't off]
# \E[=107; cursor wrap and
# 207h character wrap on
# \E[90;3u set Fkey definitions to "transmit"
# defaults
# \E[92;3u set cursor key definitions to
# "transmit" defaults
# \E[43;1u set shift F13 to transmit...
# \177\E$P\177
# \E[44;1u set shift F14 to transmit...
# \177\E$Q\177
# \E[45;1u set shift F15 to transmit...
# \177\E$R\177
# \E[46;1u set shift F16 to transmit...
# \177\E$S\177
# \E[200;1u set shift up to transmit...
# \177\E$A\177
# \E[201;1u set shift down to transmit...
# \177\E$B\177
# \E[202;1u set shift right to transmit...
# \177\E$C\177
# \E[203;1u set shift left to transmit...
# \177\E$D\177
# \E[204;1u set shift home to transmit...
# \177\E$H\177
# \E[212;1u set backtab to transmit...
# \177\E$I\177
# \E[213;1u set shift backspace to transmit...
# \177\E$^H\177
# \E[214;1u set shift del to transmit...
# "\E$\177"
# [Necessary items not mentioned in setup mode:]
# \E[2!w move to window 2
# \E[25;25w define window as line 25 of memory
# \E[!w move to window 1
# \E[2*w show current line of window 2 as
# status line
# \E[2+x set meta key to use high bit
# \E[;3+} move underline to bottom of character
#
# All Fkeys are set to their default transmit definitions with \E[90;3u
# in is2=. IMPORTANT: to use this terminal definition, the "quit" stty
# setting MUST be redefined or deactivated, because the default is
# contained in almost all of this terminal's Fkey strings! If for some
# reason "quit" cannot be altered, the Fkeys can, but it would be
# necessary to change ^| to ^] in all of these definitions, and add
# \E[2;029!t to is2.
# lines: is set to 24 because this terminal refuses to treat the 25th
# line normally.
# ll: Not available in power on mode, but turned on with \E[=107;207h in
# is2=.
# lm: Pointless, given that this definition locks a single screen of
# memory into view, but what the hey...
# rmso: Could use \E[1;7!{ to turn off only bold and reverse (leaving any
# other attributes alone), but some programs expect this to turn off
# everything.
# rmul: Could use \E[4!{ to turn off only underline (leaving any other
# attributes alone), but some programs expect this to turn off
# everything.
# sgr: Attributes are set on this terminal with the string \E[ followed by
# a list of attribute code numbers (in decimal, separated by
# semicolons), followed by the character m. The attribute code
# numbers are:
# 1 for bold;
# 2 for dim (which is ignored in power on mode);
# 4 for underline;
# 5 for blinking;
# 7 for inverse;
# 8 for not displayable; and
# =99 for protected (except that there are strange side
# effects to protected characters which make them inadvisable).
# The mapping of terminfo parameters to attributes is as follows:
# %p1 (standout) = bold and inverse together;
# %p2 (underline) = underline;
# %p3 (reverse) = inverse;
# %p4 (blink) = blinking;
# %p5 (dim) is ignored;
# %p6 (bold) = bold;
# %p7 (invisible) = not displayable;
# %p8 (protected) is ignored; and
# %p9 (alt char set) = alt char set.
# The code to do this is:
# \E[0 OUTPUT \E[0
# %?%p1%p6%O IF (standout; bold) OR
# %t;1 THEN OUTPUT ;1
# %; ENDIF
# %?%p2 IF underline
# %t;4 THEN OUTPUT ;4
# %; ENDIF
# %?%p4 IF blink
# %t;5 THEN OUTPUT ;5
# %; ENDIF
# %?%p1%p3%O IF (standout; reverse) OR
# %t;7 THEN OUTPUT ;7
# %; ENDIF
# %?%p7 IF invisible
# %t;8 THEN OUTPUT ;8
# %; ENDIF
# m OUTPUT m
# %?%p9 IF altcharset
# %t^N THEN OUTPUT ^N
# %e^O ELSE OUTPUT ^O
# %; ENDIF
# sgr0: Everything is turned off (including alternate character set), since
# there is no way of knowing what it is that the program wants turned
# off.
# smul: The "underline" attribute is reconfigurable to an overline or
# strikethru, or (as done with \E[;3+} in is2=), to a line at the true
# bottom of the character cell. This was done to allow for more readable
# underlined characters, and to be able to distinguish between an
# underlined space, an underscore, and an underlined underscore.
# xenl: Terminal can be configured to not need this, but this "glitch"
# behavior is actually preferable with autowrap terminals.
#
# Parameters kf31= thru kf53= actually contain the strings sent by the shifted
# Fkeys. There are no parameters for shifted Fkeys in terminfo. The is2
# string modifies the 'O' in kf43 to kf46 to a '$'.
#
# kcbt was originally ^I but redefined in is2=.
# kHOM was \E[H originally but redefined in is2=, as were a number of
# other keys.
# kDC was originally \177 but redefined in is2=.
#
# kbs: Shift was also ^H originally but redefined as \E$^H in is2=.
# tsl: Go to window 2, then do an hpa=.
#
#------- flash=\E[8;3!}^G\E[3;3!}
#------- flash=\E[?5h$<100>\E[?5l
# There are two ways to flash the screen, both of which have their drawbacks.
# The first is to set the bell mode to video, transmit a bell character, and
# set the bell mode back - but to what? There is no way of knowing what the
# user's old bell setting was before we messed with it. Worse, the command to
# set the bell mode also sets the key click volume, and there is no way to say
# "leave that alone", or to know what it's set to, either.
# The second way to do a flash is to set the screen to inverse video, pad for a
# tenth of a second, and set it back - but like before, there's no way to know
# that the screen wasn't ALREADY in inverse video, or that the user may prefer
# it that way. The point is moot anyway, since vi (and probably other
# programs) assume that by defining flash=, you want the computer to use it
# INSTEAD of bel=, rather than as a secondary type of signal.
#
#------- cvvis=\E[+{
# The is the power on setting, which is also as visible as the cursor
# gets.
#------- wind=\E[%i%p1%d;%p2%d;%p3%{1}%+%d;%p4%{1}%+%dw
# Windowing is possible, but not defined here because it is also used to
# emulate status line functions. Allowing a program to set a window could
# clobber the status line or render it unusable. There is additional memory,
# but screen scroll functions are destructive and do not make use of it.
#
#------- dim= Not available in power on mode.
# You have a choice of defining low intensity characters as "half bright" and
# high intensity as "normal", or defining low as "normal" and high as "bold".
# No matter which you choose, only one of either "half bright" or "bold" is
# available at any time, so taking the time to override the default is
# pointless.
#
#------- prot=\E[=0;99m
# Not defined, because it appears to have some strange side effects.
#------- pfkey=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
#------- pfloc=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
#------- pfx=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%d;1u\177%p2%s\177%;
# Available, but making them available to programs is inadvisable.
# The code to do this is:
# %?%p1%{24}%< IF ((key; 24) <;
# %p1%{30}%> ((key; 30) >;
# %p1%{54}%< (key; 54) <
# %A ) AND
# %O ) OR
# [that is, "IF key < 24 OR (key > 30 AND key < 54)",]
# %t\E[ THEN OUTPUT \E[
# %p1%d OUTPUT (key) as decimal
# [next line applies to pfx only]
# ;1 OUTPUT ;1
# u OUTPUT u
# \177 OUTPUT \177
# %p2%s OUTPUT (string) as string
# \177 OUTPUT \177
# [DEL chosen as delimiter, but could be any character]
# [implied: ELSE do nothing]
# %; ENDIF
#
#------- rs2=
# Not defined since anything it might do could be done faster and easier with
# either Meta-Shift-Reset or the main power switch.
#
#------- smkx=\E[1!z
#------- rmkx=\E[!z
# These sequences apply to the cursor and setup keys only, not to the
# numeric keypad. But it doesn't matter anyway, since making these
# available to programs is inadvisable.
# For the key definitions below, all sequences beginning with \E$ are
# custom and programmed into the terminal via is2. \E$ also has no
# meaning to any other terminal.
#
#------- cmdch=\E[;%p1%d!t
# Available, but making it available to programs is inadvisable.
#------- smxon=\E[1*q
# Available, but making it available to programs is inadvisable.
# Terminal will send XON/XOFF on buffer overflow.
#------- rmxon=\E[*q
# Available, but making it available to programs is inadvisable.
# Terminal will not notify on buffer overflow.
#------- smm=\E[2+x
#------- rmm=\E[+x
# Available, but making them available to programs is inadvisable.
#
# Printing:
# It's not made clear in the manuals, but based on other ansi/vt type
# terminals, it's a good guess that this terminal is capable of both
# "transparent print" (which doesn't copy data to the screen, and
# therefore needs mc5i: specified to say so) and "auxilliary print"
# (which does duplicate printed data on the screen, in which case mc4=
# and mc5= should use the \E[?4i and \E[?5i strings instead).
# (sgr removed to fit entry within 1023 bytes)
# (acsc removed to fit entry within 1023 bytes)
# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
# (some function-key capabilities suppressed to fit entry within 1023 bytes)
hds200|Human Designed Systems HDS200:\
:am:bw:es:hs:km:mi:ms:xn:xo:\
:co#80:it#8:li#24:lm#0:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:ae=^O:al=\E[L:as=^N:bl=^G:\
:bt=\E[Z:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:\
:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:dl=\E[M:do=\E[B:\
:ds=\E[2!w\r\n\E[!w:ei=\E[4l:fs=\E[!w:ho=\E[H:im=\E[4h:\
:is=\E)0\017\E[m\E[=107;207h\E[90;3u\E[92;3u\E[43;1u\177\E$P\177\E[44;1u\177\E$Q\177\E[45;1u\177\E$R\177\E[46;1u\177\E$S\177\E[200;1u\177\E$A\177\E[201;1u\177\E$B\177\E[202;1u\177\E$C\177\E[203;1u\177\E$D\177\E[204;1u\177\E$H\177\E[212;1u\177\E$I\177\E[213;1u\177\E$\010\177\E[214;1u"\E$\177"\E[2!w\E[25;25w\E[!w\E[2*w\E[2+x\E[;3+}:\
:kD=\177:kN=\E[U:kP=\E[V:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:\
:kr=\E[C:ku=\E[A:le=\E[D:ll=\E[H\E[A:mb=\E[0;5m:\
:md=\E[0;1m:me=\E[0m:mr=\E[0;7m:nd=\E[C:nw=\E[E:rc=\E8:\
:sc=\E7:se=\E[m\017:sf=\ED:so=\E[0;1;7m:sr=\EM:st=\EH:\
:ta=^I:ts=\E[2!w\E[%i%dG:ue=\E[m\017:up=\E[A:us=\E[0;4m:\
:ve=\E[+{:vi=\E[6+{:
# :ta: through :ce: included to specify padding needed in raw mode.
# (avt-ns: added empty <acsc> to suppress a tic warning --esr)
avt-ns|concept avt no status line:\
:am:bs:eo:mi:ul:xn:xo:\
:co#80:it#8:li#24:lm#192:\
:AL=4*\E[%dL:DL=4*\E[%dM:DO=\E[%dB:IC=\E[%d@:LE=\E[%dD:\
:RI=\E[%dC:UP=\E[%dA:ac=:ae=1\016:al=4\E[L:as=1\017:bl=^G:\
:bt=\E[Z:cd=96\E[J:ce=6\E[K:ch=\E[%+^AG:cl=38\E[H\E[J:\
:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:\
:cv=\E[%+^Ad:dc=\E[P:dl=4\E[M:do=^J:ei=\E[4l:ho=\E[H:\
:i1=\E[=103l\E[=205l:ic=\E[@:im=\E[4h:ip=4:\
:is=\E[1*q\E[2!t\E[7!t\E[=4;101;119;122l\E[=107;118;207h\E)1\E[1Q\EW\E[!y\E[!z\E>\E[0\0720\07232!r\E[0*w\E[w\E2\r\n\E[2;27!t:\
:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:kA=\E^C\r:kD=\E^B\r:\
:kI=\E^A\r:kS=\E^D\r:kb=^H:kd=\E[B:ke=\E[!z\E[0;2u:\
:kh=\E[H:kl=\E[D:kr=\E[C:ks=\E[1!z\E[0;3u:ku=\E[A:le=^H:\
:ll=\E[24H:mb=\E[5m:md=\E[1m:me=\E[m:mh=\E[1!{:mk=\E[8m:\
:mp=\E[99m:mr=\E[7m:nd=\E[C:pf=\E[4i:po=\E[5i:ps=\E[0i:\
:rc=\E8:sc=\E7:se=\E[7!{:sf=8\n:so=\E[7m:sr=4\EM:st=\EH:\
:ta=4\011:te=\E[w\E2\r\n:ti=\E[=4l\E[1;24w\E2\r:\
:ue=\E[4!{:up=\E[A:us=\E[4m:ve=\E[=119l:vs=\E[=119h:
avt-rv-ns|concept avt in reverse video mode/no status line:\
:i1=\E[=103l\E[=205h:vb=\E[=205l\E[=205h:tc=avt-ns:
avt-w-ns|concept avt in 132 column mode/no status line:\
:i1=\E[=103h\E[=205l:ti=\E[H\E[1;24;1;132w:tc=avt-ns:
avt-w-rv-ns|concept avt in 132 column mode/no status line/reverse video:\
:i1=\E[=103h\E[=205h:ti=\E[H\E[1;24;1;132w:\
:vb=\E[=205l\E[=205h:tc=avt-ns:
# Concept AVT with status line. We get the status line using the
# "Background status line" feature of the terminal. We swipe the
# first line of memory in window 2 for the status line, keeping
# 191 lines of memory and 24 screen lines for regular use.
# The first line is used instead of the last so that this works
# on both 4 and 8 page AVTs. (Note the lm#191 or 192 - this
# assumes an 8 page AVT but lm isn't currently used anywhere.)
#
avt+s|concept avt status line changes:\
:es:hs:\
:lm#191:\
:ds=\E[0*w:fs=\E[1;1!w:\
:i2=\E[2w\E[2!w\E[1;1;1;80w\E[H\E[2*w\E[1!w\E2\r\n:\
:te=\E[2w\E2\r\n:ti=\E[2;25w\E2\r:\
:ts=\E[2;1!w\E[;%dH\E[2K:
avt|avt-s|concept-avt|avt w/80 columns:\
:tc=avt+s:tc=avt-ns:
avt-rv|avt-rv-s|avt reverse video w/sl:\
:i1=\E[=103l\E[=205h:vb=\E[=205l\E[=205h:tc=avt+s:\
:tc=avt-ns:
avt-w|avt-w-s|concept avt 132 cols+status:\
:i1=\E[=103h\E[=205l:ti=\E[H\E[1;24;1;132w:tc=avt+s:\
:tc=avt-ns:
avt-w-rv|avt-w-rv-s|avt wide+status+rv:\
:i1=\E[=103h\E[=205h:ti=\E[H\E[1;24;1;132w:\
:vb=\E[=205l\E[=205h:tc=avt+s:tc=avt-ns:
#### Contel Business Systems.
#
# Contel c300 and c320 terminals.
contel300|contel320|c300|Contel Business Systems C-300 or C-320:\
:am:in:xo:\
:co#80:li#24:sg#1:\
:al=5.5*\EL:bl=^G:cd=5.5*\EJ:ce=5.5\EI:cl=\EK:\
:cm=\EX%+ \EY%+ :cr=^M:ct=\E3:dc=5.5*\EO:dl=5.5*\EM:do=^J:\
:ei=:ho=\EH:ic=\EN:im=:ip=5.5*:k0=\ERJ:k1=\ERA:k2=\ERB:\
:k3=\ERC:k4=\ERD:k5=\ERE:k6=\ERF:k7=\ERG:k8=\ERH:k9=\ERI:\
:kb=^H:le=^H:ll=\EH\EA:me=\E!\200:nd=\EC:se=\E!\200:sf=^J:\
:so=\E!\r:st=\E1:up=\EA:vb=\020\002\020\003:
# Contel c301 and c321 terminals.
contel301|contel321|c301|c321|Contel Business Systems C-301 or C-321:\
:ic@:ip@:se=20\E!\200:so=20\E!\r:vb@:tc=contel300:
#### Data General (dg)
#
# According to James Carlson <carlson@xylogics.com> writing in January 1995,
# the terminals group at Data General was shut down in 1991; all these
# terminals have thus been discontinued.
#
# DG terminals have function keys that respond to the SHIFT and CTRL keys,
# e.g., SHIFT-F1 generates a different code from F1. To number the keys
# sequentially, first the unmodified key codes are listed as F1 through F15.
# Then their SHIFT versions are listed as F16 through F30, their CTRL versions
# are listed as F31 through F45, and their CTRL-SHIFT versions are listed as
# F46 through F60. This is done in the private "includes" below whose names
# start with "dgkeys+".
#
# DG terminals generally support 8 bit characters. For each of these terminals
# two descriptions are supplied:
# 1) A default description for 8 bits/character communications, which
# uses the default DG international character set and keyboard codes.
# 2) A description with suffix "-7b" for 7 bits/character communications.
# This description must use the NON-DEFAULT native keyboard language.
# Unmodified fkeys (kf1-kf11), Shift fkeys (kf12-kf22), Ctrl fkeys (kf23-kf33),
# Ctrl/Shift fdkeys (kf34-kf44).
dgkeys+8b|Private entry describing DG terminal 8-bit ANSI mode special keys:\
:%9=\233i:F1=\233011z:F2=\233012z:F3=\233013z:\
:F4=\233014z:F5=\233000z:F6=\233101z:F7=\233102z:\
:F8=\233103z:F9=\233104z:FA=\233105z:FB=\233106z:\
:FC=\233107z:FD=\233108z:FE=\233109z:FF=\233110z:\
:FG=\233111z:FH=\233112z:FI=\233113z:FJ=\233114z:\
:FK=\233100z:FL=\233201z:FM=\233202z:FN=\233203z:\
:FO=\233204z:FP=\233205z:FQ=\233206z:FR=\233207z:\
:FS=\233208z:FT=\233209z:FU=\233210z:FV=\233211z:\
:FW=\233212z:FX=\233213z:FY=\233214z:FZ=\233200z:\
:Fa=\233301z:Fb=\233302z:Fc=\233303z:Fd=\233304z:\
:Fe=\233305z:Ff=\233306z:Fg=\233307z:Fh=\233308z:\
:Fi=\233309z:Fj=\233310z:Fk=\233311z:Fl=\233312z:\
:Fm=\233313z:Fn=\233314z:Fo=\233300z:K1=\233020z:\
:K3=\233021z:K4=\233022z:K5=\233023z:k1=\233001z:\
:k2=\233002z:k3=\233003z:k4=\233004z:k5=\233005z:\
:k6=\233006z:k7=\233007z:k8=\233008z:k9=\233009z:\
:k;=\233010z:kC=\2332J:kE=\233K:kd=\233B:kh=\233H:\
:kl=\233D:kr=\233C:ku=\233A:
dgkeys+7b|Private entry describing DG terminal 7-bit ANSI mode special keys:\
:%9=\E[i:F1=\E[011z:F2=\E[012z:F3=\E[013z:F4=\E[014z:\
:F5=\E[000z:F6=\E[101z:F7=\E[102z:F8=\E[103z:F9=\E[104z:\
:FA=\E[105z:FB=\E[106z:FC=\E[107z:FD=\E[108z:FE=\E[109z:\
:FF=\E[110z:FG=\E[111z:FH=\E[112z:FI=\E[113z:FJ=\E[114z:\
:FK=\E[100z:FL=\E[201z:FM=\E[202z:FN=\E[203z:FO=\E[204z:\
:FP=\E[205z:FQ=\E[206z:FR=\E[207z:FS=\E[208z:FT=\E[209z:\
:FU=\E[210z:FV=\E[211z:FW=\E[212z:FX=\E[213z:FY=\E[214z:\
:FZ=\E[200z:Fa=\E[301z:Fb=\E[302z:Fc=\E[303z:Fd=\E[304z:\
:Fe=\E[305z:Ff=\E[306z:Fg=\E[307z:Fh=\E[308z:Fi=\E[309z:\
:Fj=\E[310z:Fk=\E[311z:Fl=\E[312z:Fm=\E[313z:Fn=\E[314z:\
:Fo=\E[300z:K1=\E[020z:K3=\E[021z:K4=\E[022z:K5=\E[023z:\
:k1=\E[001z:k2=\E[002z:k3=\E[003z:k4=\E[004z:k5=\E[005z:\
:k6=\E[006z:k7=\E[007z:k8=\E[008z:k9=\E[009z:k;=\E[010z:\
:kC=\E[2J:kE=\E[K:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:
dgkeys+11|Private entry describing 11 minimal-subset DG mode special keys:\
:F1=^^{:F2=^^a:F3=^^b:F4=^^c:F5=^^d:F6=^^e:F7=^^f:F8=^^g:\
:F9=^^h:FA=^^i:FB=^^j:FC=^^k:FD=^^1:FE=^^2:FF=^^3:FG=^^4:\
:FH=^^5:FI=^^6:FJ=^^7:FK=^^8:FL=^^9:FM=^^\072:FN=^^;:FO=^^!:\
:FP=^^":FQ=^^#:FR=^^$:FS=^^%%:FT=^^&:FU=^^':FV=^^(:FW=^^):\
:FX=^^*:FY=^^+:k1=^^q:k2=^^r:k3=^^s:k4=^^t:k5=^^u:k6=^^v:\
:k7=^^w:k8=^^x:k9=^^y:k;=^^z:kC=^L:kE=^K:kd=^Z:kh=^H:kl=^Y:\
:kr=^X:ku=^W:
dgkeys+15|Private entry describing 15 DG mode special keys:\
:#2=^^^H:#4=^^^Y:%i=^^^X:F1=^^{:F2=^^|:F3=^^}:F4=^^~:F5=^^p:\
:F6=^^a:F7=^^b:F8=^^c:F9=^^d:FA=^^e:FB=^^f:FC=^^g:FD=^^h:\
:FE=^^i:FF=^^j:FG=^^k:FH=^^l:FI=^^m:FJ=^^n:FK=^^`:FL=^^1:\
:FM=^^2:FN=^^3:FO=^^4:FP=^^5:FQ=^^6:FR=^^7:FS=^^8:FT=^^9:\
:FU=^^\072:FV=^^;:FW=^^<:FX=^^=:FY=^^>:FZ=^^0:Fa=^^!:Fb=^^":\
:Fc=^^#:Fd=^^$:Fe=^^%%:Ff=^^&:Fg=^^':Fh=^^(:Fi=^^):Fj=^^*:\
:Fk=^^+:Fl=^^,:Fm=^^-:Fn=^^.:Fo=^^\040:K1=^^\\:K3=^^]:\
:K4=^^\136:K5=^^_:k1=^^q:k2=^^r:k3=^^s:k4=^^t:k5=^^u:k6=^^v:\
:k7=^^w:k8=^^x:k9=^^y:k;=^^z:
# Data General color terminals use the "Tektronix" color model. The total
# number of colors varies with the terminal model, as does support for
# attributes used in conjunction with color.
# Removed u7, u8 definitions since they conflict with tack:
# Preserve user-defined colors in at least some cases.
# u7=^^Fh,
# Default is ACM mode.
# u8=^^F}20^^Fi^^F}21,
#
dgunix+fixed|Fixed color info for DG D430C terminals in DG-UNIX mode:\
:ut:\
:Co#16:NC#53:pa#256:\
:Sb=\036B%+0:Sf=\036A%+0:op=\036Ad\036Bd:
dg+fixed|Fixed color info for DG D430C terminals in DG mode:\
:tc=dgunix+fixed:
# Video attributes are coordinated using static variables set by "sgr", then
# checked by "op", "seta[bf]", and "set[bf]" to refresh the attribute settings.
# (D=dim, U=underline, B=blink, R=reverse.)
dg+color8|Color info for Data General D220 and D230C terminals in ANSI mode:\
:ut:\
:Co#8:NC#16:pa#64:\
:op=\E[%?%gD%t2;%;%?%gU%t4;%;%?%gB%t5;%;%?%gR%t7;%;m:
dg+color|Color info for Data General D470C terminals in ANSI mode:\
:Co#16:NC#53:pa#256:tc=dg+color8:
dgmode+color8|Color info for Data General D220/D230C terminals in DG mode:\
:ut:\
:Co#8:NC#16:pa#64:\
:AB=\036B%+^B:AF=\036A%+^B:Sb=\036B%+0:Sf=\036A%+0:\
:op=\036Ad\036Bd:
dgmode+color|Color info for Data General D470C terminals in DG mode:\
:Co#16:pa#256:tc=dgmode+color8:
dgunix+ccc|Configurable color info for DG D430C terminals in DG-UNIX mode:\
:cc:ut:\
:Co#52:NC#53:pa#26:\
:oc=\036RG01A00FF00000000\036RG01B00000000FF00\036RG01C007F00000000\036RG01D000000007F00:\
:op=\036RF4831A\036RF2E31B\036RF1D31C\036RF3F31D:
# Colors are in the order: normal, reverse, dim, dim + reverse.
dg+ccc|Configurable color info for DG D430C terminals in DG mode:\
:cc:ut:\
:Co#52:NC#53:pa#26:\
:oc=\036RG01\07200??00000000\036RG01;00000000??00\036RG01<007?00000000\036RG01=000000007?00:\
:op=\036RF4831\072\036RF2>31;\036RF1=31<\036RF3?31=:\
:sp=\036RG2%+^P%+^P:
# The generic DG terminal type (an 8-bit-clean subset of the 6053)
# Initialization string 1 sets:
# ^R - vertical scrolling enabled
# ^C - blinking enabled
dg-generic|Generic Data General terminal in DG mode:\
:NL:am:bw:ms:xo:\
:co#80:li#24:\
:bl=^G:ce=^K:cl=^L:cm=\020%r%.%.:cr=^M:do=^Z:i1=^R^C:le=^Y:\
:mb=^N:me=^O^U^]:mh=^\:nd=^X:nw=^J:ps=^Q:se=^]:sf=^J:so=^\:\
:ue=^U:up=^W:us=^T:tc=dgkeys+11:
# According to the 4.4BSD termcap file, the dg200 :cm: should be the
# termcap equivalent of \020%p2%{128}%+%c%p1%{128}%+%c (in termcap
# notation that's "^P%r%+\200%+\200"). Those \200s are suspicious,
# maybe they were originally nuls (which would fit).
dg200|data general dasher 200:\
:NL:am:bs:bw:\
:co#80:li#24:\
:bl=^G:ce=^K:cl=^L:cm=\020%r%.%.:cr=^M:do=^Z:ho=^H:k0=^^z:\
:k1=^^q:k2=^^r:k3=^^s:k4=^^t:k5=^^u:k6=^^v:k7=^^w:k8=^^x:\
:k9=^^y:kd=^Z:kh=^H:kl=^Y:kr=^X:ku=^W:l0=f10:le=^Y:nd=^X:\
:nw=^J:se=^^E:sf=^J:so=^^D:ue=^U:up=^W:us=^T:
# Data General 210/211 (and 410?) from Lee Pearson (umich!lp) via BRL
dg210|dg-ansi|Data General 210/211:\
:am:\
:co#80:li#24:\
:cd=\E[J:ce=\E[K:cl=\E[2J:cm=\E[%i%d;%dH:do=\E[B:ho=\E[H:\
:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=\E[D:nd=\E[C:\
:nl=\E[B:nw=\r\E[H\E[A\n:se=\E[0;m:so=\E[7;m:ue=\E[0;m:\
:up=\E[A:us=\E[4;m:
# From: Peter N. Wan <ihnp4!gatech!gacsr!wan>
# courtesy of Carlos Rucalde of Vantage Software, Inc.
# (dg211: this had :cm=\020%r%.%:., which was an ancient termcap hangover.
# I suspect the d200 function keys actually work on the dg211, check it out.)
dg211|Data General d211:\
:k0@:k1@:k2@:k3@:k4@:k5@:k6@:k7@:k8@:k9@:kb=^Y:l0@:nw=^M^Z:\
:se=\036E\200/>:sf@:so=5\036D:ta=^I:te=^L:ti=^L^R:ve=^L:\
:vs=^L^R:tc=dg200:
# dg450 from Cornell (not official)
dg450|dg6134|data general 6134:\
:le@:nd=^X:tc=dg200:
# Not official...
# Note: lesser Dasher terminals will not work with vi because vi insists upon
# having a command to move straight down from any position on the bottom line
# and scroll the screen up, or a direct vertical scroll command. The 460 and
# above have both, the D210/211, for instance, has neither. We must use ANSI
# mode rather than DG mode because standard UNIX tty drivers assume that ^H is
# backspace on all terminals. This is not so in DG mode.
# (dg460-ansi: removed obsolete ":kn#6:"; also removed ":mu=\EW:", on the
# grounds that there is no matching ":ml:"
dg460-ansi|Data General Dasher 460 in ANSI-mode:\
:am:bs:ms:ul:\
:co#80:it#8:li#24:\
:al=\E[L:cd=\E[J:ce=\E[K:cl=\E[2J:cm=\E[%i%2;%2H:dc=\E[P:\
:dl=\E[M:do=\E[B:ei=:ho=\E[H:ic=\E[@:im=:is=^^F@:k0=\E[001z:\
:k1=\E[002z:k2=\E[003z:k3=\E[004z:k4=\E[005z:k5=\E[006z:\
:k6=\E[007z:k7=\E[008z:k8=\E[009z:k9=\E[00\072z:kb=\E[D:\
:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:l0=f1:l1=f2:l2=f3:\
:l3=f4:l4=f5:l5=f6:l6=f7:l7=f8:l9=f10:le=^H:mb=\E[5m:\
:me=\E(B\E[m:mh=\E[2m:mr=\E[7m:nd=\E[C:nl=\ED:ps=\E[i:\
:se=\E[m:sf=\E[S:so=\E[7m:sr=\E[T:ta=^I:u6=\E[%d;%dR:\
:u7=\E[6n:u8=\E[5n:u9=\E[0n:ue=\E[05:up=\E[A:us=\E[4m:
# From: Wayne Throop <mcnc!rti-sel!rtp47!throopw> (not official)
# Data General 605x
# Ought to work for a Model 6242, Type D210 as well as a 605x.
# Note that the cursor-down key transmits ^Z. Job control users, beware!
# This also matches a posted description of something called a `Dasher 100'
# so there's a dg100 alias here.
# (dg6053: the 4.4BSD file had :le=^H:, :do=^J:, :nd=^S:. -- esr)
dg6053-old|dg100|data general 6053:\
:am:bs:bw:ul:\
:co#80:li#24:\
:bc=^Y:bl=^G:ce=^K:cl=^L:cm=\020%r%.%.:cr=^M:do=^Z:ho=^H:\
:is=^R:k0=^^q:k1=^^r:k2=^^s:k3=^^t:k4=^^u:k5=^^v:k6=^^w:\
:k7=^^x:k8=^^y:k9=^^z:kb=^Y:kd=^Z:kh=^H:kl=^Y:kr=^X:ku=^W:\
:le=^Y:nd=^X:se=\200^^E:so=\200\200\200\200\200\036D:\
:ta=^I:te=^L:ti=^L^R:ue=^U:up=^W:us=^T:ve=^L:vs=^L^R:
# (Some performance can be gained over the generic DG terminal type)
dg6053|6053|6053-dg|dg605x|605x|605x-dg|d2|d2-dg|Data General DASHER 6053:\
:xo@:\
:ho=^P\200\200:ll=^P\200^W:tc=dg-generic:
# Like 6053, but adds reverse video and more keypad and function keys.
d200|d200-dg|Data General DASHER D200:\
:ho@:ll@:md=^^D^T:me=\017\025\035\036E:mr=^^D:se=^^E^]:\
:so=^^D^\:tc=dgkeys+15:tc=dg6053:
# DASHER D210 series terminals in ANSI mode.
# Reverse video, no insert/delete character/line, 7 bits/character only.
#
# Initialization string 1 sets:
# <0 - scrolling enabled
# <1 - blink enabled
# <4 - print characters regardless of attributes
d210|d214|Data General DASHER D210 series:\
:NL:am:bw:ms:xo:\
:co#80:li#24:\
:DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:bl=^G:cb=\E[1K:\
:cd=\E[J:ce=\E[K:cl=\E[2J:cm=\E[%i%d;%dH:cr=^M:do=\E[B:\
:ho=\E[H:i1=\E[<0;<1;<4l:le=^H:ll=\E[H\E[A:mb=\E[5m:\
:md=\E[4;7m:me=\E[m:mh=\E[2m:mr=\E[7m:nd=\E[C:nw=^J:\
:se=\E[m:sf=^J:so=\E[2;7m:ue=\E[m:up=\E[A:us=\E[4m:\
:tc=dgkeys+7b:
# DASHER D210 series terminals in DG mode.
# Like D200, but adds clear to end-of-screen and needs XON/XOFF.
d210-dg|d214-dg|Data General DASHER D210 series in DG mode:\
:xo:\
:cd=^^FF:tc=d200-dg:
# DASHER D211 series terminals in ANSI mode.
# Like the D210, but with 8-bit characters and local printer support.
#
# Initialization string 2 sets:
# \E[2;1;1;1v
# 2;1 - 8 bit operations
# 1;1 - 8 bit (international) keyboard language
# \E(B - default primary character set (U.S. ASCII)
# \E)4 - default secondary character set (international)
# ^O - primary character set
#
d211|d215|Data General DASHER D211 series:\
:km:\
:is=\E[2;1;1;1v\E(B\E)4\017:ps=\E[i:tc=dgkeys+8b:\
:tc=d210:
# Initialization string 2 sets:
# \E[2;0;1;0v
# 2;0 - 7 bit operations
# 1;0 - 7 bit (native) keyboard language
# \E(0 - default character set (the keyboard native language)
# ^O - primary character set
d211-7b|d215-7b|Data General DASHER D211 series in 7 bit mode:\
:km@:\
:is=\E[2;0;1;0v\E(0\017:tc=dgkeys+7b:tc=d211:
# Like the D210 series, but adds support for 8-bit characters.
#
# Reset string 2 sets:
# ^^N - secondary character set
# ^^FS0> - 8 bit international character set
# ^^O - primary character set
# ^^FS00 - default character set (matching the native keyboard language)
#
d211-dg|d215-dg|Data General DASHER D211 series in DG mode:\
:km:\
:rs=\036N\036FS0>\036O\036FS00:tc=d210-dg:
d216-dg|d216e-dg|d216+dg|d216e+dg|d217-dg|Data General DASHER D216 series in DG mode:\
:tc=d211-dg:
# Enhanced DG mode with changes to be more UNIX compatible.
d216-unix|d216e-unix|d216+|d216e+|Data General DASHER D216+ in DG-UNIX mode:\
:5i:\
:it#8:\
:#2=^^Pf:#4=^^Pd:%9=^^P0:%f=^^P1:%i=^^Pc:\
:ac=a\177j$k"l!m#n)q+t'u&v(w%x*:ae=\036FS00:\
:as=\036FS11:ce=^^PE:ch=\020%.\177:cl=^^PH:cv=\020\177%.:\
:do=^^PB:ho=^^PF:i1=\022\003\036P@1:i2=\036Fz0:kC=^^PH:\
:kE=^^PE:kd=^^PB:kh=^^PF:kl=^^PD:kr=^^PC:ku=^^PA:le=^^PD:\
:mb=^^PI:me=\036PJ\025\035\036E\036FS00:nd=^^PC:pf=^^Fa:\
:po=^^F`:ps=\036F?9:rs=\036N\036FS0E\036O\036FS00:sf=^J:\
:ta=^I:up=^^PA:tc=dgkeys+15:tc=d216-dg:
d216-unix-25|d216+25|Data General DASHER D216+ in DG-UNIX mode with 25 lines:\
:li#25:\
:i2=\036Fz2:tc=d216+:
d217-unix|Data General DASHER D217 in DG-UNIX mode:\
:tc=d216-unix:
d217-unix-25|Data General DASHER D217 in DG-UNIX mode with 25 lines:\
:tc=d216-unix-25:
# DASHER D220 color terminal in ANSI mode.
# Like the D470C but with fewer colors and screen editing features.
#
# Initialization string 1 sets:
# \E[<0;<1;<4l
# <0 - scrolling enabled
# <1 - blink enabled
# <4 - print characters regardless of attributes
# \E[m - all attributes off
# Reset string 1 sets:
# \Ec - initial mode defaults (RIS)
#
d220|Data General DASHER D220:\
:5i@:\
:AL@:DL@:al@:dl@:i1=\E[<0;<1;<4l\E[m:pf@:po@:r1=\Ec:\
:tc=dg+color8:tc=d470c:
d220-7b|Data General DASHER D220 in 7 bit mode:\
:5i@:\
:AL@:DL@:al@:dl@:i1=\E[<0;<1;<4l\E[m:pf@:po@:r1=\Ec:\
:tc=dg+color8:tc=d470c-7b:
# Initialization string 3 sets:
# - default cursor (solid rectangle)
# Reset string 2 sets:
# ^^N - secondary character set
# ^^FS0> - 8 bit international character set
# ^^O - primary character set
# ^^FS00 - default character set (matching the native keyboard language)
#
d220-dg|Data General DASHER D220 color terminal in DG mode:\
:5i@:\
:al@:dl@:ho@:i2=\036FQ2:is@:ll@:pf@:po@:r1@:\
:rs=\036N\036FS0>\036O\036FS00:tc=dgmode+color8:\
:tc=d470c-dg:
# DASHER D230C color terminal in ANSI mode.
# Like the D220 but with minor ANSI compatibility improvements.
#
d230c|d230|Data General DASHER D230C:\
:ke=\E[2;1v:ks=\E[2;0v:mb=\E[5;50m:md=\E[4;7;50m:\
:me=\E[50m\E)4\017:mh=\E[2;50m:mr=\E[7;50m:nw=^M^J:\
:se=\E[50m:so=\E[2;7;50m:ue=\E[50m:us=\E[4;50m:\
:tc=dgkeys+7b:tc=d220:
d230c-dg|d230-dg|Data General DASHER D230C in DG mode:\
:tc=d220-dg:
# DASHER D400/D450 series terminals.
# These add intelligent features like insert/delete to the D200 series.
#
# Initialization string 2 sets:
# ^^FQ2 - default cursor (solid rectangle)
# ^^FW - character protection disabled
# ^^FJ - normal (80 column) mode
# ^^F\^ - horizontal scrolling enabled (for alignment)
# ^^FX004? - margins at columns 0 and 79
# ^^F] - horizontal scrolling disabled
# ^^O - primary character set
# ^^FS00 - default character set (the keyboard native language)
# - (should reset scrolling regions, but that glitches the screen)
# Reset string 1 sets:
# ^^FA - all terminal defaults except scroll rate
# Reset string 2 sets:
# ^^F] - horizontal scrolling disabled
# ^^FT0 - jump scrolling
#
d400|d400-dg|d450|d450-dg|Data General DASHER D400/D450 series:\
:5i:\
:ac=j$k"l!m#n)q+t'u&v(w%x*:ae=^^O:al=^^FH:as=^^N:\
:ch=\020%.\177:cv=\020\177%.:dc=^^K:dl=^^FI:\
:eA=\036N\036FS11\036O:ei=:ho=^^FG:ic=^^J:im=:\
:is=\036FQ2\036FW\036FJ\036F\136\036FX004?\036F]\036O\036FS00:\
:ll=\036FG\027:me=\017\025\035\036E\036O:pf=^^Fa:\
:po=^^F`:r1=^^FA:r2=\036F]\036FT0:sr=^^I:ve=\036FQ2:\
:vi=\036FQ0:tc=d210-dg:
# DASHER D410/D460 series terminals in ANSI mode.
# These add a large number of intelligent terminal features.
#
# Initialization string 1 sets:
# \E[<0;<1;<2;<4l
# <0 - scrolling enabled
# <1 - blink enabled
# <2 - horizontal scrolling enabled (for alignment)
# <4 - print characters regardless of attributes
# \E[5;0v - normal (80 column) mode
# \E[1;1;80w - margins at columns 1 and 80
# \E[1;6;<2h
# 1 - print all characters even if protected
# 6 - character protection disabled
# <2 - horizontal scrolling disabled
# - (should reset scrolling regions, but that glitches the screen)
#
# Initialization string 2 sets:
# \E[3;2;2;1;1;1v
# 3;2 - default cursor (solid rectangle)
# 2;1 - 8 bit operations
# 1;1 - international keyboard language
# \E(B - default primary character set (U.S. ASCII)
# \E)4 - default secondary character set (international)
# ^O - primary character set
#
# Reset string 1 sets:
# \Ec - initial mode defaults (RIS)
# \E[<2h - horizontal scrolling disabled
#
# Reset string 2 sets:
# \E[4;0;2;1;1;1v
# 4;0 - jump scrolling
# 2;1 - 8 bit operations
# 1;1 - 8 bit (international) keyboard language
# \E(B - default primary character set (U.S. ASCII)
# \E)4 - default secondary character set (international)
#
d410|d411|d460|d461|Data General DASHER D410/D460 series:\
:5i:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:IC=\E[%d@:\
:ac=j$k"l!m#n)q+t'u&v(w%x*:ae=\E)4\017:al=\E[L:\
:as=\E)6\016:dc=\E[P:dl=\E[M:ei=:\
:i1=\E[<0;<1;<2;<4l\E[5;0v\E[1;1;80w\E[1;6;<2h:\
:ic=\E[@:im=:is=\E[3;2;2;1;1;1v\E(B\E)4\017:me=\E[m:\
:pf=\E[4i:po=\E[5i:r1=\Ec\E[<2h:\
:r2=\E[4;0;2;1;1;1v\E(B\E)4:sr=\EM:ve=\E[3;2v:\
:vi=\E[3;0v:tc=d211:
# Initialization string 2 sets:
# \E[3;2;2;0;1;0v
# 3;2 - default cursor (solid rectangle)
# 2;0 - 7 bit operations
# 1;0 - 7 bit (native) keyboard language
# \E(0 - default character set (the keyboard native language)
# ^O - primary character set
#
# Reset string 2 sets:
# \E[4;0;2;0;1;0v
# 4;0 - jump scrolling
# 2;0 - 7 bit operations
# 1;0 - 7 bit (native) keyboard language
# \E(0 - default character set (the keyboard native language)
#
d410-7b|d411-7b|d460-7b|d461-7b|Data General DASHER D410/D460 series in 7 bit mode:\
:km@:\
:ae=^O:as=^N:eA=\E)6:is=\E[3;2;2;0;1;0v\E(0\017:me=\E[m:\
:rs=\E[4;0;2;0;1;0v\E(0:tc=dgkeys+7b:tc=d410:
d410-dg|d460-dg|d411-dg|d461-dg|Data General DASHER D410/D460 series in DG mode:\
:km:\
:ae=\036FS00:as=\036FS11:eA@:\
:me=\017\025\035\036E\036FS00:tc=d400-dg:
# DASHER D410/D460 series terminals in wide (126 columns) ANSI mode.
#
# Initialization string 1 sets:
# \E[<0;<1;<2;<4l
# <0 - scrolling enabled
# <1 - blink enabled
# <2 - horizontal scrolling enabled (for alignment)
# <4 - print characters regardless of attributes
# \E[5;1v - compressed (135 column) mode
# \E[1;1;126 - margins at columns 1 and 126
# \E[1;6;<2h
# 1 - print all characters even if protected
# 6 - character protection disabled
# <2 - horizontal scrolling disabled
# - (should reset scrolling regions, but that glitches the screen)
#
# Reset string 1 sets:
# \Ec - initial mode defaults (RIS)
# \E[5;1v - compressed (135 column) mode
# \E[1;1;126w - margins at columns 1 and 126
# \E[<2h - horizontal scrolling disabled
#
d410-w|d411-w|d460-w|d461-w|Data General DASHER D410/D460 series in wide mode:\
:co#126:\
:i1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h:\
:r1=\Ec\E[5;1v\E[1;1;126w\E[<2h:tc=d410:
d410-7b-w|d411-7b-w|d460-7b-w|d461-7b-w|Data General DASHER D410/D460 series in wide 7 bit mode:\
:co#126:\
:i1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h:\
:r1=\Ec\E[5;1v\E[1;1;126w\E[<2h:tc=d410-7b:
d412-dg|d462-dg|d462e-dg|d412+dg|d462+dg|d413-dg|d463-dg|Data General DASHER D412/D462 series in DG mode:\
:tc=d410-dg:
# These add intelligent features like scrolling regions.
d412-unix|d462-unix|d412+|d462+|Data General DASHER D412+/D462+ series in Unix mode:\
:al=^^FH:cl=^^FE:dc=^^K:dl=^^FI:ei=:ho=^^FG:ic=^^J:im=:\
:is=\036FQ5\036FW\036FJ\036F\136\036FX004F\036O\036FS00:\
:ll=\036FG\036PA:ps=^A:r1=\036FA\036FT0:r2=\036P@1:\
:rc=\036F}11:sc=\036F}10:sr=^^I:ve=\036FQ5:vi=\036FQ0:\
:tc=d216+:
d412-unix-w|d462-unix-w|d412+w|d462+w|Data General DASHER D412+/D462+ series in wide Unix mode:\
:co#132:\
:is=\036FQ5\036FW\036FK\036F\136\036FX0083\036O\036FS00:\
:rs=\036P@1\036FK\036FX0083:tc=d412-unix:
d412-unix-25|d462-unix-25|d412+25|d462+25|Data General DASHER D412+/D462+ series in Unix mode with 25 lines:\
:li#25:\
:i2=\036Fz2:tc=d462+:
d412-unix-s|d462-unix-s|d412+s|d462+s|Data General DASHER D412+/D462+ in Unix mode with status line:\
:es:hs:\
:cl=\036FG\036PH:fs=\036F}01\022:\
:i2=\036Fz2\036F}00\036FB180000\036F}01:ll@:tc=d462+:
# Relative cursor motions are confined to the current window,
# which is not what the scrolling region specification expects.
# Thus, relative vertical cursor positioning must be deleted.
d412-unix-sr|d462-unix-sr|d412+sr|d462+sr|Data General DASHER D412+/D462+ in Unix mode with scrolling region:\
:do@:ll@:up@:tc=d462+:
d413-unix|d463-unix|Data General DASHER D413/D463 series in DG-UNIX mode:\
:tc=d412-unix:
d413-unix-w|d463-unix-w|Data General DASHER D413/D463 series in wide DG-UNIX mode:\
:tc=d412-unix-w:
d413-unix-25|d463-unix-25|Data General DASHER D413/D463 series in DG-UNIX mode with 25 lines:\
:tc=d412-unix-25:
d413-unix-s|d463-unix-s|Data General DASHER D413/D463 in DG-UNIX mode with status line:\
:tc=d412-unix-s:
d413-unix-sr|d463-unix-sr|Data General DASHER D413/D463 in DG-UNIX mode with scrolling region:\
:tc=d412-unix-sr:
d414-unix|d464-unix|Data General D414/D464 in DG-UNIX mode:\
:tc=d413-unix:
d414-unix-w|d464-unix-w|Data General D414/D464 in wide DG-UNIX mode:\
:tc=d413-unix-w:
d414-unix-25|d464-unix-25|Data General D414/D464 in DG-UNIX mode with 25 lines:\
:tc=d413-unix-25:
d414-unix-s|d464-unix-s|Data General D414/D464 in DG-UNIX mode with status line:\
:tc=d413-unix-s:
d414-unix-sr|d464-unix-sr|Data General D414/D464 in DG-UNIX mode with scrolling region:\
:tc=d413-unix-sr:
d430c-dg|d430-dg|Data General D430C in DG mode:\
:tc=d413-dg:tc=dg+fixed:
d430c-dg-ccc|d430-dg-ccc|Data General D430C in DG mode with configurable colors:\
:tc=d413-dg:tc=dg+ccc:
d430c-unix|d430-unix|Data General D430C in DG-UNIX mode:\
:tc=d413-unix:tc=dgunix+fixed:
d430c-unix-w|d430-unix-w|Data General D430C in wide DG-UNIX mode:\
:tc=d413-unix-w:tc=dgunix+fixed:
d430c-unix-25|d430-unix-25|Data General D430C in DG-UNIX mode with 25 lines:\
:tc=d413-unix-25:tc=dgunix+fixed:
d430c-unix-s|d430-unix-s|Data General D430C in DG-UNIX mode with status line:\
:tc=d413-unix-s:tc=dgunix+fixed:
d430c-unix-sr|d430-unix-sr|Data General D430C in DG-UNIX mode with scrolling region:\
:tc=d413-unix-sr:tc=dgunix+fixed:
d430c-unix-ccc|d430-unix-ccc|Data General D430C in DG-UNIX mode with configurable colors:\
:tc=d413-unix:tc=dgunix+ccc:
d430c-unix-w-ccc|d430-unix-w-ccc|Data General D430C in wide DG-UNIX mode with configurable colors:\
:tc=d413-unix-w:tc=dgunix+ccc:
d430c-unix-25-ccc|d430-unix-25-ccc|Data General D430C in DG-UNIX mode with 25 lines and configurable colors:\
:tc=d413-unix-25:tc=dgunix+ccc:
d430c-unix-s-ccc|d430-unix-s-ccc|Data General D430C in DG-UNIX mode with status line and configurable colors:\
:tc=d413-unix-s:tc=dgunix+ccc:
d430c-unix-sr-ccc|d430-unix-sr-ccc|Data General D430C in DG-UNIX mode with scrolling region and configurable colors:\
:tc=d413-unix-sr:tc=dgunix+ccc:
# DASHER D470C color terminal in ANSI mode.
# Like the D460 but with 16 colors and without a compressed mode.
#
# Initialization string 1 sets:
# \E[<0;<1;<2;<4l
# <0 - scrolling enabled
# <1 - blink enabled
# <2 - horizontal scrolling enabled (for alignment)
# <4 - print characters regardless of attributes
# \E[1;1;80w - margins at columns 1 and 80
# \E[1;6;<2h
# 1 - print all characters even if protected
# 6 - character protection disabled
# <2 - horizontal scrolling disabled
# - (should reset scrolling regions, but that glitches the screen)
#
d470c|d470|Data General DASHER D470C:\
:i1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h:tc=dg+color:\
:tc=d460:
d470c-7b|d470-7b|Data General DASHER D470C in 7 bit mode:\
:i1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h:tc=dg+color:\
:tc=d460-7b:
# Initialization string 2 sets:
# ^^FQ2 - default cursor (solid rectangle)
# ^^FW - character protection disabled
# ^^F\^ - horizontal scrolling enabled (for alignment)
# ^^FX004? - margins at columns 0 and 79
# ^^F] - horizontal scrolling disabled
# ^^O - primary character set
# ^^FS00 - default character set (the keyboard native language)
# - (should reset scrolling regions, but that glitches the screen)
#
d470c-dg|d470-dg|Data General DASHER D470C in DG mode:\
:is=\036FQ2\036FW\036F\136\036FX004?\036F]\036O\036FS00:\
:tc=dgmode+color:tc=d460-dg:
# DASHER D555 terminal in ANSI mode.
# Like a D411, but has an integrated phone.
d555|Data General DASHER D555:\
:tc=d411:
d555-7b|Data General DASHER D555 in 7-bit mode:\
:tc=d411-7b:
d555-w|Data General DASHER D555 in wide mode:\
:tc=d411-w:
d555-7b-w|Data General DASHER D555 in wide 7-bit mode:\
:tc=d411-7b-w:
d555-dg|Data General DASHER D555 series in DG mode:\
:tc=d411-dg:
# DASHER D577 terminal in ANSI mode.
# Like a D411, but acts as a keyboard for serial printers ("KSR" modes).
d577|Data General DASHER D577:\
:tc=d411:
d577-7b|Data General DASHER D577 in 7-bit mode:\
:tc=d411-7b:
d577-w|Data General DASHER D577 in wide mode:\
:tc=d411-w:
d577-7b-w|Data General DASHER D577 in wide 7-bit mode:\
:tc=d411-7b-w:
d577-dg|d578-dg|Data General DASHER D577/D578 series in DG mode:\
:tc=d411-dg:
# DASHER D578 terminal.
# Like a D577, but without compressed mode; like a D470C in this respect.
#
# Initialization string 1 sets:
# \E[<0;<1;<2;<4l
# <0 - scrolling enabled
# <1 - blink enabled
# <2 - horizontal scrolling enabled (for alignment)
# <4 - print characters regardless of attributes
# \E[1;1;80w - margins at columns 1 and 80
# \E[1;6;<2h
# 1 - print all characters even if protected
# 6 - character protection disabled
# <2 - horizontal scrolling disabled
# - (should reset scrolling regions, but that glitches the screen)
#
d578|Data General DASHER D578:\
:i1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h:tc=d577:
d578-7b|Data General DASHER D578 in 7-bit mode:\
:i1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h:tc=d577-7b:
#### Datamedia (dm)
#
# Datamedia was headquartered in Nashua, New Hampshire until it went
# out of business in 1993, but the ID plates on the terminals referred
# to the factory in Pennsauken, NJ. The factory was sold to a PCB board
# manufacturer which threw out all information about the terminals.
#
cs10|colorscan|Datamedia Color Scan 10:\
:ms:\
:co#80:li#24:\
:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%2;%2H:cr=^M:\
:do=^J:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:kd=\E[B:kl=\E[D:\
:kr=\E[C:ku=\E[A:le=^H:me=\E[m:nd=\E[C:se=\E[m:sf=^J:\
:so=\E[7m:ue=\E[m:up=\E[A:us=\E[4m:
cs10-w|Datamedia Color Scan 10 with 132 columns:\
:co#132:\
:cm=\E[%i%2;%3H:tc=cs10:
# (dm1520: removed obsolete ":ma=^\ ^_^P^YH:" -- esr)
dm1520|dm1521|datamedia 1520:\
:am:bs:xn:\
:co#80:it#8:li#24:\
:bl=^G:cd=^K:ce=^]:cl=^L:cm=\036%r%+ %+ :cr=^M:do=^J:ho=^Y:\
:kd=^J:kh=^Y:kl=^H:kr=^\:ku=^_:le=^H:nd=^\:sf=^J:ta=^I:up=^_:
# dm2500: this terminal has both :IC: and :im:. Applications using
# termcap/terminfo directly (rather than through ncurses) might be confused.
dm2500|datamedia2500|datamedia 2500:\
:bs:nc:\
:co#80:li#24:\
:al=15\020\n\030\035\030\035:bl=^G:ce=^W:cl=^^^^\177:\
:cm=\014%r%n%.%.:dc=10*\020\010\030\035:\
:dl=10*\020\032\030\035:dm=^P:do=^J:ed=^X^]:\
:ei=10\377\377\030\035:ho=^B:ic=10*\020\034\030\035:\
:im=^P:le=^H:nd=^\:pc=\377:se=^X^]:sf=^J:so=^N:up=^Z:
# dmchat is like DM2500, but DOES need "all that padding" (jcm 1/31/82)
# also, has a meta-key.
# From: <goldberger@su-csli.arpa>
# (dmchat: ":MT:" changed to ":km:" -- esr)
dmchat|dmchat version of datamedia 2500:\
:km:\
:al=1*\020\n\030\035\030\035:dl=2\020\032\030\035:\
:tc=dm2500:
# (dm3025: ":MT:" changed to ":km:" -- esr)
dm3025|datamedia 3025a:\
:bs:km:\
:co#80:it#8:li#24:\
:al=130\EP\n\EQ:bl=^G:cd=2\EJ:ce=\EK:cl=2\EM:\
:cm=\EY%r%+ %+ :cr=^M:dc=6\010:dl=130\EP\EA\EQ:dm=\EP:\
:do=^J:ed=\EQ:ei=\EQ:ho=\EH:im=\EP:ip=6:is=\EQ\EU\EV:le=^H:\
:nd=\EC:se=\EO0:sf=^J:so=\EO1:ta=^I:up=\EA:
dm3045|datamedia 3045a:\
:am:bs:eo:km@:ul:xn:\
:al@:dc=6\EB:dl@:dm@:ed@:ei=\EP:is=\EU\EV:k0=\Ey\r:k1=\Ep\r:\
:k2=\Eq\r:k3=\Er\r:k4=\Es\r:k5=\Et\r:k6=\Eu\r:k7=\Ev\r:\
:k8=\Ew\r:k9=\Ex\r:kh=\EH:kr=\EC:ku=\EA:pc=\177:se@:so@:\
:tc=dm3025:
# Datamedia DT80 soft switches:
# 1 0=Jump 1=Smooth
# Autorepeat 0=off 1=on
# Screen 0=Dark 1=light
# Cursor 0=u/l 1=block
#
# 2 Margin Bell 0=off 1=on
# Keyclick 0=off 1=on
# Ansi/VT52 0=VT52 1=Ansi
# Xon/Xoff 0=Off 1=On
#
# 3 Shift3 0=Hash 1=UK Pound
# Wrap 0=Off 1=On
# Newline 0=Off 1=On
# Interlace 0=Off 1=On
#
# 4 Parity 0=Odd 1=Even
# Parity 0=Off 1=On
# Bits/Char 0=7 1=8
# Power 0=60Hz 1=50Hz
#
# 5 Line Interface 0=EIA 1=Loop
# Aux Interface 0=EIA 1=Loop
# Local Copy 0=Off 1=On
# Spare
#
# 6 Aux Parity 0=Odd 1=Even
# Aux Parity 0=Off 1=On
# Aux Bits/Char 0=7 1=8
# CRT Saver 0=Off 1=On
# dm80/1 is a vt100 lookalike, but it doesn't seem to need any padding.
dm80|dmdt80|dt80|datamedia dt80/1:\
:cd=\E[J:ce=\E[K:cl=\E[2J\E[H:cm=%i\E[%d;%dH:do=^J:\
:ho=\E[H:me=\E[m:nd=\E[C:pf=\E[4i:po=\E[5i:ps=\E[0i:\
:se=\E[m:so=\E[7m:sr=\EM:ue=\E[m:up=\E[A:us=\E[4m:tc=vt100:
# except in 132 column mode, where it needs a little padding.
# This is still less padding than the vt100, and you can always turn on
# the ^S/^Q handshaking, so you can use vt100 flavors for things like
# reverse video.
dm80w|dmdt80w|dt80w|datamedia dt80/1 in 132 char mode:\
:co#132:\
:cd=20\E[0J:ce=20\E[0K:cl=50\E[H\E[2J:cm=5\E[%i%d;%dH:\
:do=^J:up=5\E[A:tc=dm80:
# From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
dt80-sas|Datamedia DT803/DTX for SAS usage:\
:am:bw:\
:co#80:li#24:\
:ac=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~:\
:ae=\EG:al=\EL:as=\EF:bl=^G:cd=^K:ce=^]:cl=^L:\
:cm=\E=%r%+ %+ :cr=^M:ct=\E'0:dl=\EM:do=\EB:ff=^L:ho=^Y:\
:is=\E)0\E<\EP\E'0\E$2:kC=^L:kE=^]:kS=^K:kd=^J:kh=^Y:kl=^H:\
:kr=^\:ku=^_:le=^H:me=^X:mr=\E$2\004:nd=^\:pf=^O:po=^N:se=^X:\
:sf=\EB:so=\E$2\004:sr=\EI:st=\E'1:ta=^I:up=^_:
# Datamedia Excel 62, 64 from Gould/SEL UTX/32 via BRL
# These aren't end-all Excel termcaps; but do insert/delete char/line
# and name some of the extra function keys. (Mike Feldman ccvaxa!feldman)
# The naming convention has been bent somewhat, with the use of E? (where
# E is for 'Excel') as # a name. This was done to distinguish the entries
# from the other Datamedias in use here, and yet to associate a model of
# the Excel terminals with the regular datamedia terminals that share
# major characteristics.
excel62|excel64|datamedia Excel 62:\
:dc=\E[P:ei=\E[4l:im=\E[4h:k5=\EOu:k6=\EOv:k7=\EOw:k8=\EOx:\
:k9=\EOy:kb=^H:kd=^J:kl=^H:tc=dt80:
excel62-w|excel64-w|datamedia Excel 62 in 132 char mode:\
:dc=\E[P:ei=\E[4l:im=\E[4h:k5=\EOu:k6=\EOv:k7=\EOw:k8=\EOx:\
:k9=\EOy:kb=^H:kd=^J:kl=^H:tc=dt80w:
excel62-rv|excel64-rv|datamedia Excel 62 in reverse video mode:\
:dc=\E[P:ei=\E[4l:im=\E[4h:k5=\EOu:k6=\EOv:k7=\EOw:k8=\EOx:\
:k9=\EOy:kb=^H:kd=^J:kl=^H:vb=\E[?5l\E[?5h:tc=dt80:
#### Falco
#
# Falco Data Products
# 440 Potrero Avenue
# Sunnyvale, CA 940864-196
# Vox: (800)-325-2648
# Fax: (408)-745-7860
# Net: techsup@charm.sys.falco.com
#
# Current Falco models as of 1995 are generally ANSI-compatible and support
# emulations of DEC VT-series, Wyse, and Televideo types.
#
# Test version for Falco ts-1. See <arpavax.hickman@ucb> for info
# This terminal was released around 1983 and was discontinued long ago.
# The standout and underline highlights are the same.
falco|ts1|ts-1|falco ts-1:\
:am:bs:\
:co#80:it#8:li#24:\
:al=\EE:bl=^G:cd=\EY:ce=\ET\EG0\010:cl=\E*:cm=\E=%+ %+ :\
:cr=^M:dc=\EW:dl=\ER:do=^J:ei=\Er:ho=^^:im=\Eq:is=\Eu\E3:\
:k0=^A0\r:kd=^J:kl=^H:kr=^L:ku=^K:le=^H:me=\Eg0:nd=^L:\
:se=\Eg0:sf=^J:so=\Eg1:ta=^I:ue=\Eg0:up=^K:us=\Eg1:
falco-p|ts1p|ts-1p|falco ts-1 with paging option:\
:am:bs:da:db:mi:ms:ul:\
:co#80:it#8:li#24:\
:al=\EE:bl=^G:bt=\EI:cd=\EY:ce=\ET\EG0\010\Eg0:cl=\E*:\
:cm=\E=%+ %+ :cr=^M:dc=\EW:dl=\ER:do=\E[B:ei=\Er:im=\Eq:\
:is=\EZ\E3\E_c:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:\
:le=^H:me=\Eg0:nd=\E[C:se=\Eg0:sf=^J:so=\Eg4:ta=^I:te=\E_b:\
:ti=\E_d:ue=\Eg0:up=\E[A:us=\Eg1:
# (ts100: I added <rmam>/<smam> based on the init string -- esr)
ts100|ts100-sp|falco ts100-sp:\
:am:mi:ms:xn:xo:\
:co#80:it#8:li#24:vt#3:\
:DO=\E[%dB:LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:\
:UP=\E[%dA:\
:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
:ae=^O:al=\E~E:as=^N:bl=^G:cb=3\E[1K:cd=50\E[J:ce=3\E[K:\
:cl=50\E[H\E[J:cm=5\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
:ct=\E[3g:dc=\E~W:dl=\E~R:do=^J:eA=\E(B\E)0:ei=:ho=\E[H:\
:i1=\E~)\E~ea:ic=\E~Q:im=:kb=^H:kd=\EOB:ke=\E[?1l\E>:\
:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:mb=2\E[5m:\
:md=2\E[1m:me=2\E[0m:mr=2\E[7m:nd=2\E[C:rc=\E8:\
:rs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:sc=\E7:se=2\E[m:\
:sf=^J:so=2\E[1;7m:sr=5\EM:st=\EH:ta=^I:ue=2\E[m:up=2\E[A:\
:us=2\E[4m:tc=vt100+fnkeys:
ts100-ctxt|falco ts-100 saving context:\
:te=\E~_b:ti=\E~_d\E[2J:tc=ts100:
#### Florida Computer Graphics
#
# Florida Computer Graphics Beacon System, using terminal emulator program
# "host.com", as provided by FCG. This description is for an early release
# of the "host" program. Known bug: :cd: clears the whole screen, so it's
# commented out.
# From: David Bryant <cbosg!djb> 1/7/83
beacon|FCG Beacon System:\
:am:da:db:\
:co#80:li#32:\
:al=\EE:bl=1\ESTART\r\E37\r\EEND\r:ce=\ET:cl=10\EZ:\
:cm=20\E=%+ %+ :cr=^M:dc=\EW:dl=\ER:do=^J:ei=:ho=10\EH:\
:ic=\EQ:im=:le=^H:mb=\ESTART\r\E61,1\r\EEND\r:\
:me=20\ESTART\r\E78\r\E70,0\r\EEND\r:\
:mr=\ESTART\r\E59,1\r\EEND\r:nd=\EV:\
:se=20\ESTART\r\E70,0\r\EEND\r:sf=^J:\
:so=20\ESTART\r\E70,6\r\EEND\r:te=:\
:ti=10\ESTART\r\E2,0\r\E12\r\EEND\r:\
:ue=\ESTART\r\E60,0\r\EEND\r:up=\EU:\
:us=\ESTART\r\E60,1\r\EEND\r:
#### Fluke
#
# The f1720a differences from ANSI: no auto margin, destructive
# tabs, # of lines, funny highlighting and underlining
f1720|f1720a|fluke 1720A:\
:xt:\
:co#80:li#16:sg#1:ug#1:\
:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:\
:do=\E[B:is=\E[H\E[2J:kd=^]:kl=^_:kr=^^:ku=^\:le=^H:me=\E[m:\
:nd=\E[C:se=\E[m:sf=\ED:so=\E[7m:sr=\EM:ue=\E[m:up=\E[A:\
:us=\E[4m:
#### Liberty Electronics (Freedom)
#
# Liberty Electronics
# 48089 Fremont Blvd
# Fremont CA 94538
# Vox: (510)-623-6000
# Fax: (510)-623-7021
# From: <faletti@berkeley.edu>
# (f100: added empty <acsc> to suppress a tic warning;
# made this relative to adm+sgr -- note that <invis> isn't
# known to work for f100 but does on the f110. --esr)
f100|freedom|freedom100|freedom model 100:\
:am:bs:bw:hs:mi:ms:xo:\
:co#80:li#24:\
:ac=:ae=\E$:al=8.5*\EE:as=\E%%:bl=^G:bt=\EI:cd=\EY:ce=\ET:\
:ch=\E]%+ :cl=^Z:cm=\E=%+ %+ :cr=^M:ct=\E3:cv=\E[%+ :\
:dc=\EW:dl=11.5*\ER:do=^J:ds=\Eg\Ef\r:ei=\Er:fs=^M:ho=^^:\
:im=\Eq:ip=6:is=\Eg\Ef\r\Ed:k1=^A@\r:k2=^AA\r:k3=^AB\r:\
:k4=^AC\r:k5=^AD\r:k6=^AE\r:k7=^AF\r:k8=^AG\r:k9=^AH\r:\
:k;=^AI\r:kB=\EI:kb=^H:kd=^V:kh=^^:kl=^H:kr=^L:ku=^K:le=^H:\
:nd=^L:sf=^J:sr=\Ej:st=\E1:ta=^I:ts=\Eg\Ef:up=^K:vb=\Eb\Ed:\
:tc=adm+sgr:
f100-rv|freedom-rv|freedom 100 in reverse video:\
:is=\Eg\Ef\r\Eb:vb=\Ed\Eb:tc=f100:
# The f110 and f200 have problems with vi(1). They use the ^V
# code for the down cursor key. When kcud1 is defined in terminfo
# as ^V, the Control Character Quoting capability (^V in insert mode)
# is lost! It cannot be remapped in vi because it is necessary to enter
# a ^V to to quote the ^V that is being remapped!!!
#
# f110/f200 users will have to decide whether
# to lose the down cursor key or the quoting capability. We will opt
# initially for leaving the quoting capability out, since use of VI
# is not generally applicable to most interactive applications
# (f110: added :ta:, :kh: & <kcbt> from f100 -- esr)
f110|freedom110|Liberty Freedom 110:\
:bw@:es:\
:it#8:ws#80:\
:ae=\E%%:al=\EE:as=\E$:dl=\ER:do=^V:ds=\Ef\r:ei=\Er\EO:\
:im=\EO\Eq:ip@:is@:k0=^AI\r:k;@:kA=\EE:kC=^^:kD=\EW:kE=\ET:\
:kI=\EQ:kL=\ER:kS=\EY:mb=\EG2:md=\EG0:mh=\EG@:pf=\Ea:po=\E`:\
:so=\EG<:sr=\EJ:ts=\Ef:vb=\Eb\Ed:ve=\E.2:vi=\E.1:tc=f100:
f110-14|Liberty Freedom 110 14inch:\
:dc@:tc=f110:
f110-w|Liberty Freedom 110 - 132 cols:\
:co#132:tc=f110:
f110-14w|Liberty Freedom 110 14in/132 cols:\
:co#132:\
:dc@:tc=f110:
# (f200: added <acsc> to suppress tic warnings re :as:/:ae: --esr)
f200|freedom200|Liberty Freedom 200:\
:am:bs:es:hs:mi:ms:xo:\
:co#80:it#8:li#24:ws#80:\
:ac=:ae=\E%%:al=\EE:as=\E$:bl=^G:bt=\EI:cd=\EY:ce=\ET:\
:ch=\E]%+ :cl=^Z:cm=\E=%+ %+ :cr=^M:cs=\Em0%+ %+ :ct=\E3:\
:cv=\E[%+ :dc=\EW:dl=\ER:do=^V:ds=\Ef\r:ei=\Er:fs=^M:ho=^^:\
:im=\Eq:k0=^AI\r:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:\
:k5=^AD\r:k6=^AE\r:k7=^AF\r:k8=^AG\r:k9=^AH\r:kA=\EE:kC=^^:\
:kD=\EW:kE=\ET:kI=\EQ:kL=\ER:kS=\EY:kb=^H:kd=^V:kl=^H:kr=^L:\
:ku=^K:le=^H:mb=\EG2:md=\EG0:mh=\EG@:nd=^L:pf=\Ea:po=\E`:\
:sf=^J:so=\EG<:sr=\EJ:st=\E1:ts=\Ef:up=^K:vb=\Eo\En:ve=\E.1:\
:vi=\E.0:tc=adm+sgr:
f200-w|Liberty Freedom 200 - 132 cols:\
:co#132:tc=f200:
# The f200 has the ability to reprogram the down cursor key. The key is
# reprogrammed to ^J (linefeed). This value is remembered in non-volatile RAM,
# so powering the terminal off and on will not cause the change to be lost.
f200vi|Liberty Freedom 200 for vi:\
:kd=^J:vb=\Eb\Ed:tc=f200:
f200vi-w|Liberty Freedom 200 - 132 cols for vi:\
:co#132:tc=f200vi:
#### GraphOn (go)
#
# Graphon Corporation
# 544 Division Street
# Campbell, CA 95008
# Vox: (408)-370-4080
# Fax: (408)-370-5047
# Net: troy@graphon.com (Troy Morrison)
#
#
# The go140 and go225 have been discontinued. GraphOn now makes X terminals,
# including one odd hybrid that starts out life on power-up as a character
# terminal, than can be switched to X graphics mode (driven over the serial
# line) by an escape sequence. No info on this beast yet.
# (go140: I added <rmam>/<smam> based on the init string -- esr)
go140|graphon go-140:\
:bs:\
:co#80:it#8:li#24:\
:RA=\E[?7l:SA=\E[?7h:al=\E[L:cd=10\E[J:ce=\E[K:\
:cl=10\E[H\E[2J:cm=\E[%i%2;%2H:dc=\E[P:dl=\E[M:do=\E[B:\
:ei=\E[4l:if=/usr/share/tabset/vt100:im=\E[4h:\
:is=\E<\E=\E[?3l\E[?7l\E(B\E[J\E7\E[;r\E8\E[m\E[q:\
:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:kd=\EOB:ke=\E[?1l\E>:\
:kh=\E[H:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:\
:me=\E[m:nd=\E[C:se=\E[m:so=\E[7m:sr=\EM:ta=^I:ue=\E[m:\
:up=\E[A:us=\E[4m:
go140w|graphon go-140 in 132 column mode:\
:am:\
:co#132:\
:is=\E<\E=\E[?3h\E[?7h\E(B\E[J\E7\E[;r\E8\E[m\E[q:\
:tc=go140:
# Hacked up vt200 termcap to handle GO-225/VT220
# From: <edm@nwnexus.WA.COM>
# (go225: I added <rmam>/<smam> based on the init string -- esr)
go225|go-225|Graphon 225:\
:am:bs:mi:xn:\
:co#80:it#8:li#25:vt#3:\
:RA=\E[?7l:SA=\E[?7h:al=\E[L:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\
:cm=\E[%i%d;%dH:cs=\E[%i%d;%dr:dc=\E[P:dl=\E[M:do=^J:\
:ei=\E[4l:ho=\E[H:im=\E[4h:\
:is=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:k1=\EOP:k2=\EOQ:\
:k3=\EOR:k4=\EOS:kb=^H:kd=\E[B:ke=\E>:kh=\E[H:kl=\E[D:\
:kr=\E[C:ks=\E=:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[m:\
:mr=\E[7m:nd=\E[C:r1=\E[!p\E[?7h\E[2;1;1#w:rc=\E8:\
:rf=/usr/share/tabset/vt100:sc=\E7:se=\E[27m:sf=\ED:\
:so=\E[7m:sr=\EM:ta=^I:te=\E[!p\E[?7h\E[2;1;1#w:\
:ti=\E[2;0#w\E[1;25r:ue=\E[24m:up=\E[A:us=\E[4m:
#### Harris (Beehive)
#
# Bletch. These guys shared the Terminal Brain Damage laurels with Hazeltine.
# Their terminal group is ancient history now (1995) though the parent
# company is still in business.
#
# Beehive documentation is undated and marked Preliminary and has no figures
# so we must have early Superbee2 (Model 600, according to phone conversation
# with mfr.). It has proved reliable except for some missing padding
# (notably after \EK and <nl> at bottom of screen).
#
# The key idea is that AEP mode is poison for :cm: & that US's in
# the local memory should be avoided like the plague. That means
# that the 2048 character local buffer is used as 25 lines of 80
# characters, period. No scrolling local memory, folks. It also
# appears that we cannot use naked INS LINE feature since it uses
# US. The sbi fakes :al: with an 80-space insert that may be too
# slow at low speeds; also spaces get converted to \040 which is
# too long for some programs (not vi). DEL LINE is ok but slow.
#
# The <nl> string is designed for last line of screen ONLY; cup to
# 25th line corrects the motion inherent in scrolling to Page 1.
#
# There is one understood bug. It is that the screen appears to
# pop to a new (blank) page after a :nw:, or leave a half-line
# ellipsis to a quad that is the extra 48 memory locations. The
# data received is dumped into memory but not displayed. Not to
# worry if :cm: is being used; the lines not displayed will be,
# whenever the cursor is moved up there. Since :cm: is addressed
# relative to MEMORY of window, nothing is lost; but beware of
# relative cursor motion (:up:,:do:,:nd:,:le:). Recommended,
# therefore, is setenv MORE -c .
#
# WARNING: Not all features tested.
#
# Timings are assembled from 3 sources. Some timings may reflect
# SB2/Model 300 that were used if more conservative.
# Tested on a Model 600 at 1200 and 9600 bd.
#
# The BACKSPACEkb option is cute. The NEWLINE key, so cleverly
# placed on the keyboard and useless because of AEP, is made
# into a backspace key. In use ESC must be pressed twice (to send)
# and sending ^C must be prefixed by ESC to avoid that weird
# transmit mode associated with ENTER key.
#
# IF TERMINAL EVER GOES CATATONIC with the cursor buzzing across
# the screen, then it has dropped into ENTER mode; hit
# RESET--ONLINE--!tset.
#
# As delivered this machine has a FATAL feature that will throw
# it into that strange transmit state (SPOW) if the space bar is
# hit after a CR is received, but before receiving a LF (or a
# few others).
#
# The circuits MUST be modified to eliminate the SPOW latch.
# This is done by strapping on chip A46 of the I/O board; cut
# the p.c. connection to Pin 5 and strap Pin 5 to Pin 8 of that
# chip. This mod has been checked out on a Mod 600 of Superbee II.
# With this modification absurdly high timings on cr are
# unnecessary.
#
# NOTE WELL that the rear panel switch should be set to CR/LF,
# not AEP!
#
sb1|beehive superbee:\
:am:bs:bw:da:db:mi:ul:xb:\
:co#80:li#25:sg#1:ug#1:\
:al=3\EN\EL\EQ \EP \EO\ER\EA:\
:bl=^G:bt=650\E`:cd=3\EJ:ce=3\EK:cl=3\EH\EJ:cm=\EF%r%3%3:\
:cr=\r:ct=\E3:dc=3\EP:dl=100\EM:do=^J:ei=\ER:ho=1\EH:\
:im=\EQ\EO:is=\EE\EX\EZ\EO\Eb\Eg\ER:k0=\E2:k1=\Ep:k2=\Eq:\
:k3=\Er:k4=\Es:k5=\Et:k6=\Eu:k7=\Ev:k8=\Ew:k9=\E1:kE=\EK:\
:kI=\EQ\EO:kL=\EM:kM=\ER:kS=\EJ:kb=^_:kd=\EB:kh=\EH:kl=\ED:\
:kr=\EC:ku=\EA:l0=TAB CLEAR:l9=TAB SET:le=^H:me=\E_3:\
:nd=3\EC:se=\E_3:sf=^J:so=\E_1:st=\E1:ta=^I:te=:ti=\EO:\
:ue=\E_3:up=3\EA:us=\E_0:
sbi|superbee|beehive superbee at Indiana U.:\
:xb:\
:al=1\EN\EL\EQ \EP \EO\ER\EA:cr=1\r:tc=sb1:
# Alternate (older) description of Superbee - f1=escape, f2=^C.
# Note: there are at least 3 kinds of superbees in the world. The sb1
# holds onto escapes and botches ^C's. The sb2 is the best of the 3.
# The sb3 puts garbage on the bottom of the screen when you scroll with
# the switch in the back set to CRLF instead of AEP. This description
# is tested on the sb2 but should work on all with either switch setting.
# The f1/f2 business is for the sb1 and the :xb: can be taken out for
# the other two if you want to try to hit that tiny escape key.
# This description is tricky: being able to use cup depends on there being
# 2048 bytes of memory and the hairy <nl> string.
superbee-xsb|beehive super bee:\
:am:da:db:xb:\
:co#80:it#8:li#25:\
:cd=3\EJ:ce=3\EK:cl=3\EH\EJ:cm=\EF%r%3%3:cr=1000\r:ct=\E3:\
:dc=3\EP:dl=100\EM:do=^J:ho=\EH:is=\EH\EJ:k1=\Ep:k2=\Eq:\
:k3=\Er:k4=\Es:k5=\Et:k6=\Eu:k7=\Ev:k8=\Ew:kd=\EB:kh=\EH:\
:kl=\ED:kr=\EC:ku=\EA:le=^H:me=\E_3:nd=\EC:se=\E_3:\
:sf=\n\200\200\200\n\200\200\200\EA\EK\200\200\200\ET\ET:\
:so=\E_1:st=\E1:ta=^I:up=3\EA:ve=^J:
# This loses on lines > 80 chars long, use at your own risk
superbeeic|super bee with insert char:\
:ei=\ER:ic=:im=\EQ:tc=superbee-xsb:
sb2|sb3|fixed superbee:\
:xb@:tc=superbee:
#### Beehive Medical Electronics
#
# Steve Seymour <srseymour@mindspring.com> writes (Wed, 03 Feb 1999):
# Regarding your question though; Beehive terminals weren't made by Harris.
# They were made by Beehive Medical Electronics in Utah. They went out of
# business in the early '80s.
#
# (OK, then, I don't know why a couple of these say "harris beehive".)
#
# Reports are that most of these Beehive entries (except superbee) have not
# been tested and do not work right. :se: is a trouble spot. Be warned.
# (bee: :ic: was empty, which is obviously bogus -- esr)
beehive|bee|harris beehive:\
:am:bs:mi:\
:co#80:li#24:\
:al=\EL:bt=\E>:cd=\EJ:ce=\EK:cl=\EE:cm=\EF%+ %+ :dc=\EP:\
:dl=\EM:do=\EB:ei=\E@:ho=\EH:im=\EQ:kA=\EL:kB=\E>:kC=\EE:\
:kD=\EP:kE=\EK:kI=\EQ:kL=\EM:kM=\E@:kb=^H:kd=\EB:kh=\EH:\
:kl=\ED:kr=\EC:ku=\EA:le=^H:me=\Ed@:nd=\EC:se=\Ed@:so=\EdP:\
:ue=\Ed@:up=\EA:us=\Ed`:
# set tab is ^F, clear (one) tab is ^V, no way to clear all tabs.
# good grief - does this entry make :sg:/:ug: when it doesn't have to?
# look at those spaces in :se:/:so:. Seems strange to me...
# (beehive: :if=/usr/share/tabset/beehive: removed, no such file. If you
# really care, cook up one using ^F -- esr)
beehive3|bh3m|beehiveIIIm|harris beehive 3m:\
:am:bs:\
:co#80:it#8:li#20:\
:al=160\023:bl=^G:cd=^R:ce=^P:cl=^E^R:cr=^M:dl=350\021:\
:do=^J:ho=^E:le=^H:ll=^E^K:nd=^L:se=\040^_:sf=^J:so=^]\040:\
:st=^F:ta=^I:up=^K:
beehive4|bh4|beehive 4:\
:am:\
:co#80:li#24:\
:bl=^G:cd=\EJ:ce=\EK:cl=\EE:cr=^M:do=^J:ho=\EH:le=\ED:nd=\EC:\
:sf=^J:up=\EA:
# There was an early Australian kit-built computer called a "Microbee".
# It's not clear whether this is for one of those or for a relative
# of the Beehive.
microb|microbee|micro bee series:\
:am:bs:\
:co#80:it#8:li#24:\
:bl=^G:cd=\EJ:ce=\EK:cl=\EE:cm=\EF%+ %+ :cr=^M:do=^J:k1=\Ep:\
:k2=\Eq:k3=\Er:k4=\Es:k5=\Et:k6=\Eu:k7=\Ev:k8=\Ew:k9=\Ex:\
:kd=\EB:kh=\EH:kl=\ED:kr=\EC:ku=\EA:le=^H:me=\Ed@:nd=\EC:\
:se=\Ed@:sf=^J:so=\040\EdP:ta=^I:ue=\Ed@:up=\EA:us=\Ed`:
# 8675, 8686, and bee from Cyrus Rahman
# (8675: changed k10, k11...k16 to k;, F1...F6 -- esr)
ha8675|harris 8675:\
:F1=^W:F2=\ER:F3=\EE:F4=\EI:F5=\Ei:F6=\Eg:\
:is=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU:k1=^F:k2=^P:k3=^N:\
:k4=^V:k5=^J:k6=^T:k7=^H:k8=\177:k9=\Ee:k;=\Ed:tc=bee:
# (8686: changed k10, k11...k16 to k;, F1...F6; fixed broken continuation
# in :is: -- esr)
ha8686|harris 8686:\
:F1=\EW:F2=\002\E{\003:F3=\002\E|\003:F4=\002\E}\003:\
:F5=\002\E~\003:F6=\002\E\177\003:\
:is=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU\E"*Z01\E"8F35021B7C83#\E"8F45021B7D83#\E"8F55021B7E83#\E"8F65021B7F83#\E"8F75021B7383#\E"8F851BD7#\E"8F95021B7083#\E"8FA5021B7183#\E"8FB5021B7283#:\
:k1=\002\Ep\003:k2=\002\Eq\003:k3=\002\Er\003:\
:k4=\002\Es\003:k5=\E3:k6=\EI:k7=\ER:k8=\EJ:k9=\E(:k;=\Ej:\
:tc=bee:
#### Hazeltine
#
# Hazeltine appears to be out of the terminal business as of 1995. These
# guys were co-owners of the Terminal Brain Damage Hall Of Fame along with
# Harris. They have a hazeltine.com domain (but no web page there ) and can
# be reached at:
#
# Hazeltine
# 450 East Pulaski Road
# Greenlawn, New York 11740
#
# As late as 1993, manuals for the terminal product line could still be
# purchased from:
#
# TRW Customer Service Division
# 15 Law Drive
# P.O. Box 2076
# Fairfield, NJ 07007-2078
#
# They're now (1998) a subsidiary of General Electric, operating under the
# marque "GEC-Marconi Hazeltine" and doing military avionics. Web page
# at <http://www.gec.com/cpd/1ncpd.htm#1.55>.
#
# Since :nd: is blank, when you want to erase something you
# are out of luck. You will have to do ^L's a lot to
# redraw the screen. h1000 is untested. It doesn't work in
# vi - this terminal is too dumb for even vi. (The code is
# there but it isn't debugged for this case.)
hz1000|hazeltine 1000:\
:bs:\
:co#80:li#12:\
:bl=^G:cl=^L:cr=^M:do=^J:ho=^K:le=^H:nd=\040:sf=^J:
# From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
hz1420|hazeltine 1420:\
:am:bs:\
:co#80:li#24:\
:al=\E^Z:bl=^G:cd=\E^X:ce=\E^O:cl=\E^\:cm=\E\021%r%.%+ :\
:cr=^M:dl=\E^S:do=^J:le=^H:nd=^P:se=\E^Y:sf=^J:so=\E^_:ta=^N:\
:up=\E^L:
# New "safe" cursor movement (11/87) from <cgs@umd5.umd.edu>. Prevents
# freakout with out-of-range args and tn3270. No hz since it needs to
# receive tildes.
hz1500|hazeltine 1500:\
:am:bs:hz:\
:co#80:li#24:\
:al=40~\032:bl=^G:cd=10~\030:ce=~^O:cl=~^\:\
:cm=~\021%r%>^^ %+`%+`:cr=^M:dl=40~\023:do=~^K:ho=~^R:\
:kd=^J:kh=~^R:kl=^H:kr=^P:ku=~^L:le=^H:nd=^P:se=~^Y:sf=^J:\
:so=~^_:up=~^L:
# h1510 assumed to be in sane escape mode. Else use h1500.
# (h1510: early versions of this entry apparently had ":se=\E^_:,
# :so=\E^Y:, but these caps were commented out in 8.3; also,
# removed incorrect and overridden ":do=^J:" -- esr)
hz1510|hazeltine 1510:\
:am:bs:\
:co#80:li#24:\
:al=\E^Z:bl=^G:cd=\E^X:ce=\E^O:cl=\E^\:cm=\E\021%r%.%.:\
:cr=^M:dl=\E^S:do=\E^K:le=^H:nd=^P:sf=^J:up=\E^L:
# Hazeltine 1520
# The following switch settings are assumed for normal operation:
# FULL CR U/L_CASE ESCAPE
# FORMAT_OFF EOM_A_OFF EOM_B_OFF WRAPAROUND_ON
# Other switches may be set for operator convenience or communication
# requirements.
hz1520|Hazeltine 1520:\
:am:bs:bw:ms:\
:co#80:li#24:\
:al=\E^Z:bl=^G:cd=\E^X:ce=\E^O:cl=\E^\:cm=\E\021%r%.%.:\
:cr=^M:dl=\E^S:do=^J:ho=\E^R:kA=\E^Z:kC=\E^\:kE=\E^O:\
:kL=\E^S:kS=\E^X:kb=^H:kd=\E^K:kh=\E^R:kl=^H:kr=^P:ku=\E^L:\
:le=^H:md=\E^_:me=\E^Y:nd=^P:r1=\E$\E\005\E?\E\031:\
:se=\E^Y:sf=^J:so=\E^_:up=\E^L:
# This version works with the escape switch off
# (h1520: removed incorrect and overridden ":do=^J:" -- esr)
hz1520-noesc|hazeltine 1520:\
:am:hz:\
:co#80:li#24:\
:al=~^Z:bl=^G:cd=~^X:ce=~^O:cl=~^\:cm=1~\021%r%.%.:cr=^M:\
:dl=~^S:do=~^K:ho=~^R:le=^H:nd=^P:se=~^Y:sf=^J:so=~^_:up=~^L:
# Note: the h1552 appears to be the first Hazeltine terminal which
# is not braindamaged. It has tildes and backprimes and everything!
# Be sure the auto lf/cr switch is set to cr.
hz1552|hazeltine 1552:\
:bs:\
:al=\EE:dl=\EO:do=^J:k1=\EP:k2=\EQ:k3=\ER:l1=blue:l2=red:\
:l3=green:tc=vt52:
hz1552-rv|hazeltine 1552 reverse video:\
:do=^J:se=\ET:so=\ES:tc=hz1552:
# Note: h2000 won't work well because of a clash between upper case and ~'s.
hz2000|hazeltine 2000:\
:am:bs:nc:\
:co#74:li#27:\
:al=6~\032:bl=^G:cl=6~\034:cm=~\021%r%.%.:dl=6~\023:do=^J:\
:ho=~^R:le=^H:pc=\177:sf=^J:
# Date: Fri Jul 23 10:27:53 1982. Some unknown person wrote:
# I tested this termcap entry for the Hazeltine Esprit with vi. It seems
# to work ok. There is one problem though if one types a lot of garbage
# characters very fast vi seems not able to keep up and hangs while trying
# to insert. That's in insert mode while trying to insert in the middle of
# a line. It might be because the Esprit doesn't have insert char and delete
# char as a built in function. Vi has to delete to end of line and then
# redraw the rest of the line.
esprit|Hazeltine Esprit I:\
:am:bs:bw:\
:co#80:li#24:\
:al=\E^Z:bl=^G:bt=\E^T:cd=\E^W:ce=\E^O:cl=\E^\:\
:cm=\E\021%r%.%.:cr=^M:dl=\E^S:do=\E^K:ho=\E^R:is=\E?:\
:k0=^B0^J:k1=^B1^J:k2=^B2^J:k3=^B3^J:k4=^B4^J:k5=^B5^J:\
:k6=^B6^J:k7=^B7^J:k8=^B8^J:k9=^B9^J:kb=^H:kd=\E^K:ke=\E>:\
:kh=\E^R:kl=^H:kr=^P:ks=\E<:ku=\E^L:l0=0:l1=1:l2=2:l3=3:l4=4:\
:l5=5:l6=6:l7=7:l8=8:l9=9:le=^H:nd=^P:se=\E^Y:sf=^J:so=\E^_:\
:up=\E^L:
esprit-am|hazeltine esprit auto-margin:\
:am:tc=esprit:
# Hazeltine Modular-1 from Cliff Shackelton <ittvax!ittral!shackelt> via BRL
# Vi it seems always wants to send a control J for "do" and it turned out
# that the terminal would work somewhat if the auto LF/CR was turned off.
# (hmod1: removed :dn=~^K: -- esr)
hmod1|Hazeltine Modular 1:\
:am:bs:hz:\
:co#80:li#24:\
:al=~^Z:bl=^G:bt=~^T:cl=~^\:cm=~\021%r%.%.:cr=^M:dl=~^S:\
:do=~^K:ho=~^R:kd=~^K:kh=~^R:kl=^H:kr=^P:ku=~^L:le=^H:me=~^Y:\
:nd=^P:rc=~^Q:sc=~^E:se=~^Y:sf=^J:so=~^_:up=~^L:
#
# Hazeltine Executive 80 Model 30 (1554?)
# from Will Martin <control@ALMSA-1.ARPA> via BRL
# Like VT100, except for different "am" behavior.
hazel|exec80|h80|he80|Hazeltine Executive 80:\
:am:bs:pt:\
:co#80:it#8:li#24:vt#3:\
:bl=^G:cd=50\E[J:ce=3\E[K:cl=50\E[;H\E[2J:\
:cm=5\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:do=^J:ho=\E[H:\
:is=\E[1;24r\E[24;1H:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:\
:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:\
:ku=\EOA:le=^H:mb=2\E[5m:md=2\E[1m:me=2\E[m:mr=2\E[7m:\
:nd=2\E[C:nl=^J:r1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:\
:rc=\E8:rf=/usr/share/tabset/vt100:sc=\E7:se=2\E[m:\
:so=2\E[7m:sr=5\EM:ta=^I:ue=2\E[m:up=2\E[A:us=2\E[4m:
#### IBM
#
ibm327x|line mode IBM 3270 style:\
:gn:\
:ce=^M:cl=^M^J:ho=^M:
ibm3101|i3101|IBM 3101-10:\
:am:bs:xo:\
:co#80:li#24:\
:bl=^G:cd=\EJ:ce=\EI:cl=\EK:cm=\EY%+ %+ :cr=^M:ct=\EH:do=^J:\
:ho=\EH:kd=\EB:kl=\ED:kr=\EC:ku=\EA:le=^H:nd=\EC:nw=^M^J:\
:sf=^J:st=\E0:up=\EA:
ibm3151|IBM 3151 display:\
:ae=\E>B:as=\E>A:is=\E S:me=\E4@:rs=\E S:s0=\E>B:te=\E>B:\
:ti=\E>B:tc=ibm3162:
# From: Mark Easter <marke@fsi-ssd.csg.ssd.fsi.com> 29 Oct 1992
# removed kend, knp, kpp -TD
ibm3161|ibm3163|wy60-316X|wyse60-316X|IBM 3161/3163 display:\
:am:bs:mi:ms:\
:co#80:it#8:li#24:\
:F1=\Ek\r:F2=\El\r:F3=\E!a\r:F4=\E!b\r:F5=\E!c\r:\
:F6=\E!d\r:F7=\E!e\r:F8=\E!f\r:F9=\E!g\r:FA=\E!h\r:\
:FB=\E!i\r:FC=\E!j\r:FD=\E!k\r:FE=\E!l\r:\
:ac=j\352k\353l\354m\355n\356q\361t\364u\365v\366w\367x\370:\
:bl=^G:cd=\EJ:ce=\EI:cl=\EH\EJ:cm=\EY%+ %+ :cr=^M:dc=\EQ:\
:dl=\EO:do=\EB:ho=\EH:k1=\Ea\r:k2=\Eb\r:k3=\Ec\r:k4=\Ed\r:\
:k5=\Ee\r:k6=\Ef\r:k7=\Eg\r:k8=\Eh\r:k9=\Ei\r:k;=\Ej\r:\
:kA=\EN:kB=\E2:kC=\EL\r:kD=\EQ:kE=\EI:kI=\EP \010:kL=\EO:\
:kS=\EJ:kT=\E0:ka=\E 1:kb=^H:kd=\EB:kh=\EH:kl=\ED:kr=\EC:\
:kt=\E1:ku=\EA:le=\ED:mb=\E4D:md=\E4H:me=\E4@\E<@:mk=\E4P:\
:mr=\E4A:nd=\EC:pf=^P^T:po=^P^R:se=\E4@:sf=^J:so=\E4A:\
:te=\E>A:ti=\E>A:ue=\E4@:up=\EA:us=\E4B:
ibm3161-C|IBM 3161-C NLS terminal using cartridge:\
:s0=\E>B:s1=\E>A:te=\E>B:ti=\E>B:tc=ibm3161:
ibm3162|IBM 3162 display:\
:al=\EN:mb=\E4$a:md=\E4(a:me=\E4@:mk=\E40a:mr=\E4!a:\
:se=\E4>b:so=\E4!a:ue=\E4=b:us=\E4"a:tc=ibm3161-C:
# This really should not use setab/setaf, but it is clear that the
# original terminfo does not toggle red/blue colors as in setb/setf.
ibm3164|i3164|IBM 3164:\
:ms:\
:Co#8:pa#64:\
:AB=\E4 %+@:op=\E4 "@:s0=\E>B:s1=\E>A:te=\E!9(N\E>B:\
:ti=\E!9/N\E>B:tc=ibm3161:
# (sgr removed to fit entry within 1023 bytes)
# (rmacs/smacs removed for consistency)
# (acsc removed to fit entry within 1023 bytes)
# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
ibm5151|wy60-AT|wyse60-AT|IBM 5151 Monochrome display:\
:am:bw:ms:xo:\
:co#80:it#8:li#25:\
:AL=\E[%dL:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:\
:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:al=\E[L:bl=^G:cd=\E[J:\
:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:dc=\E[P:dl=\E[M:\
:do=^J:ec=\E[%dX:ei=\E[4l:ho=\E[H:im=\E[4h:is=\Ec:\
:k1=\E[001q:k2=\E[002q:k3=\E[003q:k4=\E[004q:k5=\E[005q:\
:k6=\E[006q:k7=\E[007q:k8=\E[008q:k9=\E[009q:kD=\E[P:\
:kI=\E[139q:kN=\E[154q:kP=\E[150q:kb=^H:kd=\E[B:kh=\E[H:\
:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[0m:\
:mr=\E[7m:nd=\E[C:rs=\Ec:se=\E[m:sf=\E[S:so=\E[7m:sr=\E[T:\
:ue=\E[m:up=\E[A:us=\E[4m:
ibmaed|IBM Experimental display:\
:am:bs:eo:ms:\
:co#80:it#8:li#52:\
:al=\EN:cd=\EJ:ce=\EI:cl=\EH\EK:cm=\EY%+ %+ :dc=\EQ:dl=\EO:\
:do=\EB:ei=:ho=\EH:ic=\EP:im=:kb=^H:kd=\EB:kl=\ED:kr=\EC:\
:ku=\EA:le=^H:me=\E0:nd=\EC:se=\E0:so=\E0:ta=^I:up=\EA:\
:vb=\EG:
ibm-apl|apl|IBM apl terminal simulator:\
:li#25:tc=dm1520:
# (ibmmono: this had an unknown `sb' boolean, I changed it to `bs'.
# Also it had ":I0=f10:" which pretty obviously should be "l0=f10" -- esr)
ibmmono|IBM workstation monochrome:\
:es:hs:\
:al=\EL:dl=\EM:ds=\Ej\EY8 \EI\Ek:fs=\Ek:k0=\E<:k1=\ES:\
:k2=\ET:k3=\EU:k4=\EV:k5=\EW:k6=\EP:k7=\EQ:k8=\ER:k9=\EY:\
:kF=\EE:kI=\200:kN=\EE:kP=\Eg:kR=\EG:kb=^H:kh=\EH:l0=f10:\
:md=\EZ:me=\Ew\Eq\Ez\EB:mk=\EF\Ef0;\Eb0;:mr=\Ep:se=\Ez:\
:so=\EZ:sr=\EA:ue=\Ew:us=\EW:tc=ibm3101:
ibmega|IBM Enhanced Color Display:\
:cr=^M:do=^J:kb=^H:kd=^J:kl=^H:nw=^M^J:sf=^J:ta=^I:\
:tc=ibmmono:
# This color scheme is assumed in some recent IBM terminal descriptions
# (green on black, emulated on a 16-color terminal).
ibm+color|IBM color definitions:\
:Co#8:NC#3:pa#64:\
:op=\E[32m\E[40m:
ibm+16color|IBM aixterm color definitions:\
:Co#16:pa#256:
ibm5154|IBM 5154 Color display:\
:Co#8:NC@:pa#64:\
:AB=\E[4%dm:AF=\E[3%dm:md@:tc=ibm5151:tc=ibm+color:
ibmega-c|ibm5154-c|IBM Enhanced Color Display with standout and underline:\
:se=\EB:so=\EF\Ef3;:ue=\EB:us=\EF\Ef2;:tc=ibmmono:
ibmvga-c|IBM VGA display color termcap:\
:cr=^M:do=^J:kb=^H:kd=^J:kl=^H:nw=^M^J:sf=^J:ta=^I:\
:tc=ibmega-c:
ibmvga|IBM VGA display:\
:cr=^M:do=^J:kb=^H:kd=^J:kl=^H:nw=^M^J:sf=^J:ta=^I:tc=ibmega:
# ibmapa* and ibmmono entries come from ACIS 4.3 distribution
rtpc|ibmapa16|IBM 6155 Extended Monochrome Graphics Display:\
:li#32:\
:ds=\Ej\EY@ \EI\Ek:tc=ibmmono:
ibm6155|IBM 6155 Black & White display:\
:mb@:md@:tc=ibm5151:
# Advanced Monochrome (6153) and Color (6154) Graphics Display:
ibmapa8c|ibmapa8|IBM 6154 Advanced Graphics Display:\
:li#31:\
:ds=\Ej\EY? \EI\Ek:tc=ibmmono:
ibmapa8c-c|ibm6154-c|IBM 6154 Advanced Color Graphics Display:\
:li#31:\
:ds=\Ej\EY? \EI\Ek:mh=\EF\Ef7;:tc=ibmega-c:
ibm6154|IBM 6154 Color displays:\
:mb@:md=\E[12m:me=\E[0;10m:s0=\E[10m:s1=\E[11m:s2=\E[12m:\
:tc=ibm5154:
ibm6153|IBM 6153 Black & White display:\
:mb@:md=\E[12m:me=\E[0;10m:s0=\E[10m:s1=\E[11m:s2=\E[12m:\
:tc=ibm5151:
ibm6153-90|IBM 6153 Black & White display:\
:co#90:li#36:\
:mb@:md@:tc=ibm5151:
ibm6153-40|IBM 6153 Black & White display:\
:co#40:li#12:tc=ibm6153-90:
ibm8512|ibm8513|IBM color VGA Terminal:\
:am:mi:ms:\
:co#80:it#8:li#25:\
:AL=\E[%dL:DL=\E[%dM:RA=\E[?7l:SA=\E[?7h:\
:ac=jjkkllmmnnqqttuuvvwwxx:ae=^O:al=\E[L:as=^N:cd=\E[J:\
:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:dl=\E[M:dm=\E[4h:\
:do=^J:ec=\E[%dX:ed=\E[4l:ei=\E[4l:ho=\E[H:im=\E[4h:\
:is=\Eb\E[m\017\E[?7h:k0=\E[010q:k1=\E[001q:k2=\E[002q:\
:k3=\E[003q:k4=\E[004q:k5=\E[005q:k6=\E[006q:k7=\E[007q:\
:k8=\E[008q:k9=\E[009q:kd=\E[B:kh=\E[H:ku=\E[A:le=\E[D:\
:mb=\E[5m:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:\
:r1=\Eb\E[m\017\E[?7h\E[H\E[J:rc=\E[u:sc=\E[s:se=\E[m:\
:so=\E[7m:te=\E[20h:ti=\E[20;4l\E[?7h\Eb:ue=\E[m:up=\E[A:\
:us=\E[4m:tc=ibm8503:
hft-c|HFT with Color:\
:Co#8:pa#64:\
:AB=\E[4%dm:AF=\E[3%dm:ac=jjkkllmmnnqqttuuvvwwxx:\
:me=\E[0m\E(B:s0=\E(B:s1=\E(0:tc=ibm5151:tc=ibm+color:
hft-c-old|HFT with Color PC850:\
:Co#8:pa#64:\
:AB=\E[4%dm:AF=\E[3%dm:tc=ibm5151:tc=ibm+color:
hft-old|AIWS High Function Terminal:\
:am:xo:\
:co#80:li#25:\
:al=\E[L:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:\
:cr=^M:dc=\E[P:dl=\E[M:do=^J:ei=\E6:ho=\E[H:ic=\E[@:im=\E6:\
:k1=\E[001q:k2=\E[002q:k3=\E[003q:k4=\E[004q:k5=\E[005q:\
:k6=\E[006q:k7=\E[007q:k8=\E[008q:k9=\E[009q:kN=\E[153q:\
:kP=\E[159q:ka=\E[010q:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:\
:kr=\E[C:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[m:mk=\E[8m:\
:mr=\E[7m:nd=\E[C:se=\E[m:sf=^J:so=\E[7m:ta=^I:ue=\E[m:\
:up=\E[A:us=\E[4m:tc=ibm+color:
ibm-system1|system1|ibm system/1 computer:\
:am:xt:\
:co#80:li#24:\
:bl=^G:cl=^Z:cm=\005%+ %+ :ho=^K:le=^H:nd=^\:sf=^J:up=^^:
# lft-pc850 : IBM Low Function Terminal Device
# lft "supports" underline, bold, and blink in the sense that the lft code
# sets all the right bits. HOWEVER, depending upon the adapter, these
# attributes may or may not be supported by the device driver.
# (sgr removed to fit entry within 1023 bytes)
# (rmacs/smacs removed for consistency)
# (acsc removed to fit entry within 1023 bytes)
# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
lft|lft-pc850|LFT-PC850|IBM LFT PC850 Device:\
:am:bw:ms:xo:\
:co#80:it#8:li#25:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
:LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:\
:al=\E[L:bl=^G:bt=\E[Z:cd=\E[2J:ce=\E[0K:cl=\E[H\E[J:\
:cm=\E[%i%d;%dH:cr=^M:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:\
:ec=\E[%dX:ei=\E[4l:ho=\E[H:im=\E[4h:is=\Ec:k1=\E[001q:\
:k2=\E[002q:k3=\E[003q:k4=\E[004q:k5=\E[005q:k6=\E[006q:\
:k7=\E[007q:k8=\E[008q:k9=\E[009q:kD=\E[P:kI=\E[139q:\
:kN=\E[154q:kP=\E[150q:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:\
:kr=\E[C:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[m\E(B:\
:mr=\E[7m:nd=\E[C:rs=\Ec:se=\E[0m:sf=\ED:so=\E[7m:sr=\EL:\
:ue=\E[0m:up=\E[A:us=\E[4m:
ibm5081|hft|IBM Megapel Color display:\
:ac=jjkkllmmnnqqttuuvvwwxx:mb@:md@:me=\E[0m\E(B:s0=\E(B:\
:s1=\E(0:tc=ibm5154:
ibm5081-c|ibmmpel-c|IBM 5081 1024x1024 256/4096 Megapel enhanced color display:\
:es:hs:\
:li#33:\
:ds=\Ej\EYA \EI\Ek:fs=\Ek:tc=ibmega-c:
ibm8503|ibm8507|ibm8604|IBM 8503 B & W VGA display:\
:tc=hft-c:
ibm8514|IBM 8514/a color VGA display:\
:es:hs:\
:ds=\Ej\EYI \EI\Ek:fs=\Ek:tc=hft:
ibm8514-c|IBM 8514 color display with standout and underline:\
:es:hs:\
:li#41:\
:cr=^M:do=^J:ds=\Ej\EYI \EI\Ek:fs=\Ek:kb=^H:kd=^J:kl=^H:\
:nw=^M^J:sf=^J:ta=^I:tc=ibmega-c:
#
# AIX entries. IBM ships these with AIX 3.2.5.
# -- added rc, sc based on manpage -TD
# Note that we could use ibm+16color, but that is not how IBM defines this one.
aixterm|IBM Aixterm Terminal Emulator:\
:es:hs:\
:ac=jjkkllmmnnqqttuuvvwwxx:ds=\E[?E:fs=\E[?F:md=\E[1m:\
:me=\E[0;10m\E(B:rc=\E8:s0=\E(B:s1=\E(0:sc=\E7:sr@:\
:ts=\E[?%dT:tc=ibm6154:
aixterm-m|IBM AIXterm Monochrome Terminal Emulator:\
:es:hs:\
:ac=jjkkllmmnnqqttuuvvwwxx:ds=\E[?E:fs=\E[?F:md=\E[1m:\
:me=\E[0;10m\E(B:s0=\E(B:s1=\E(0:sr@:ts=\E[?%dT:\
:tc=ibm6153:
aixterm-m-old|old IBM AIXterm Monochrome Terminal Emulator:\
:es:hs:\
:ds=\E[?E:fs=\E[?F:md=\E[1m:sr@:ts=\E[?%dT:tc=ibm6153:
jaixterm|IBM Kanji Aixterm Terminal Eemulator:\
:ac@:tc=aixterm:
jaixterm-m|IBM Kanji AIXterm Monochrome Terminal Emulator:\
:ac@:tc=aixterm-m:
# This flavor is adapted from xterm, in turn from aixterm documentation -TD
aixterm-16color|IBM Aixterm Terminal Emulator with 16 colors:\
:tc=ibm+16color:tc=aixterm:
#### Infoton/General Terminal Corp.
#
# gt100 sounds like something DEC would come out with. Let's hope they don't.
i100|gt100|gt100a|General Terminal 100A (formerly Infoton 100):\
:am:bs:\
:co#80:li#24:\
:al=\EL:bl=^G:cd=\EJ:ce=\EK:cl=^L:cm=\Ef%r%+ %+ :cr=^M:\
:dl=\EM:do=^J:ho=\EH:le=^H:nd=\EC:se=\Ea:sf=^J:so=\Eb:up=\EA:\
:vb=\Eb\Ea:
i400|infoton 400:\
:am:bs:\
:co#80:li#25:\
:al=\E[L:bl=^G:ce=\E[N:cl=\E[2J:cm=\E[%i%3;%3H:cr=^M:\
:dc=\E[4h\E[2Q\E[P\E[4l\E[0Q:dl=\E[M:do=^J:\
:ei=\E[4l\E[0Q:im=\E[4h\E[2Q:le=^H:nd=\E[C:sf=^J:up=\E[A:
# (addrinfo: removed obsolete ":bc=^Z:" -- esr)
addrinfo:\
:am:\
:co#80:li#24:\
:bl=^G:cd=^K:cl=^L:cm=\037%.%.:cr=^M:do=^J:ho=^H:le=^Z:\
:ll=^H^\:nd=^Y:sf=^J:up=^\:
# (infoton: used to have the no-ops <lh#0>, <lw#0>, <nlab#0> -- esr)
infoton:\
:am:\
:co#80:li#24:\
:bl=^G:cd=^K:cl=^L:cr=^M:do=^J:le=^Z:ll=^H^\:nd=^Y:sf=^J:\
:up=^\:
# The ICL6402 was actually the Kokusai Display System 6402.
# The 6404 was the KDS7372 (color version of the 6402).
#
# ICL6404 control codes follow:
#
#code function
#~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#ctrl-A set SOM position at cursor position
#ctrl-G Bell
#ctrl-H Backspace
#ctrl-I Horiz tab
#ctrl-J Linefeed
#ctrl-K Cursor up
#ctrl-L Cursor right
#ctrl-M Carriage return
#ctrl-N Disable xon/xoff to host
#ctrl-O Enable xon/xoff to host
#ctrl-R Enable bidirectional mode
#ctrl-T Disable bidirectional mode
#ctrl-V Cursor down
#ctrl-Z Clear unprotected data to insert char
#ctrl-^ Cursor home
#ctrl-_ Newline
#
#ESC lead-in char for multiple character command
#
#ESC space R execute power on sequence
#ESC ! p1 p2 define scroll region:
# p1 = scroll top line: 20h - 37h
# p1 = scroll bottom line: 20h - 37h
#ESC " unlock keyboard
#ESC # lock keyboard
#ESC $ Semi-graphics mode on
#ESC % Semi-graphics mode off
#ESC & protect mode on
#ESC ' protect mode off
#ESC ( write protect mode off (full intensity)
#ESC ) write protect mode on (half intensity)
#
#ESC * clear screen
#ESC + clear unprotected data to insert char
#ESC , clear unprotected data to half intensity spaces
#ESC - p1 p2 p3 p4 address cursor to page, row, column:
# p1 = page number 0 - 3
# p2 = row 20h - 7fh
# p3 = column (lo) 20h - 7fh
# p4 = column (hi) 20h - 21h (only 132 col)
#ESC . p1 set cursor style:
# p1 = 0 invisible cursor
# p1 = 1 block blinking cursor
# p1 = 2 block steady cursor
# p1 = 3 underline blinking cursor
# p1 = 4 underline steady cursor
#ESC / transmit cursor location (page, row, column)
#ESC 0 p1 p2 p3 p4 program edit key:
# p1 = edit key code: '@'-'S', '`'-'s'
# p2 p3 p4 = program data (3 bytes)
#
#ESC 1 set tab
#ESC 2 clear tab at cursor
#ESC 3 clear all tabs
#ESC 4 send unprotect line to cursor
#ESC 5 send unprotect page to cursor
#ESC 6 send line to cursor
#ESC 7 send page to cursor
#ESC 8 n set scroll mode:
# n = 0 set jump scroll
# n = 1 set smooth scroll
#ESC 9 n control display:
# n = 0 display off
# n = 1 display on
#ESC : clear unprotected data to null
#ESC ; clear unprotected data to insert char
#
#ESC < keyclick on
#ESC = p1 p2 address cursor to row, column
# p1 = row 20h - 7fh
# p2 = column (lo) 20h - 7fh
# p3 = column (hi) 20h - 21h (only 132 col)
#ESC > keyclick off
#ESC ? transmit cursor location (row, column)
#
#ESC @ copy print mode on
#ESC A copy print mode off
#ESC B block mode on
#ESC C block mode off (conversation mode)
#ESC D F set full duplex
#ESC D H set half duplex
#ESC E line insert
#ESC F p1 p2 set page colour (p1 = f/grnd, p2 = b/grnd)
# 0 = black, 1 = red, 2 = green, 3 = yellow
# 4 = blue, 5 = magenta, 6 = cyan, 7 = white
#ESC G n set serial field attribute (n = 30h - 3Fh)
#ESC H n full graphics mode:
# n = 0 exit full graphics mode
# n = 1 enter full graphics mode
#ESC I back tab
#ESC J back page
#ESC K forward page
#
#ESC L unformatted page print
#ESC M L move window left (132 col mode only)
#ESC M R move window right (132 col mode only)
#ESC N set page edit (clear line edit)
#ESC O set line edit (clear page edit)
#ESC P formatted page print
#ESC Q character insert
#ESC R line delete
#ESC S send message unprotected only
#ESC T erase line to insert char
#ESC U set monitor mode (see ESC X, ESC u)
#
#ESC V n select video attribute mode:
# n = 0 serial field attribute mode
# n = 1 parallel character attribute mode
#ESC V 2 n define line attribute:
# n = 0 single width single height
# n = 1 single width double height
# n = 2 double width single height
# n = 3 double width double height
#ESC V 3 n select character font:
# n = 0 system font
# n = 1 user defined font
#ESC V 4 n select screen mode:
# n = 0 page screen mode
# n = 1 virtual screen mode
#ESC V 5 n control mouse mode:
# n = 0 disable mouse
# n = 1 enable sample mode
# n = 2 send mouse information
# n = 3 enable request mode
#ESC W character delete
#ESC X clear monitor mode (see ESC U, ESC u)
#ESC Y erase page to insert char
#
#ESC Z n send user/status line:
# n = 0 send user line
# n = 1 send status line
# n = 2 send terminal ID
#ESC [ p1 p2 p3 set character attribute (parallel char mode):
# p1: 0 = normal
# 1 = blank
# 2 = blink
# 3 = blink blank (= blank)
# 4 = reverse
# 5 = reverse blank
# 6 = reverse blink
# 7 = reverse blink blank (= reverse blank)
# 8 = underline
# 9 = underline blank
# : = underline blink
# ; = underline blink blank
# < = reverse underline
# = = reverse underline blank
# > = reverse underline blink
# ? = reverse underline blink blank
# p2, p3: f/grnd, b/grnd colour
# (see ESC F for colours)
# use ZZ for mono, eg.
# ESC [ 0 Z Z for normal
# ESC [ 4 Z Z for inverse etc.
#
#ESC \ n set page size:
# n = 1 24 lines/page
# n = 2 48 lines/page
# n = 3 72 lines/page
# n = 4 96 lines/page
#ESC ] n set Wordstar mode:
# n = 0 normal (KDS7372) mode
# n = 1 Wordstar mode
#
#ESC b set foreground colour screen
#
#ESC c n enter self-test mode:
# n = 0 exit self test mode
# n = 1 ROM test
# n = 2 RAM test
# n = 3 NVRAM test
# n = 4 screen display test
# n = 5 main/printer port test
# n = 6 mouse port test
# n = 7 graphics board test
# n = 8 graphics memory test
# n = 9 display all 'E'
# n = : display all 'H'
#ESC d set background colour screen
#
#ESC e n program insert char (n = insert char)
#ESC f text CR load user status line with 'text'
#
#ESC g display user status line on 25th line
#ESC h display system status line on 25th line
#ESC i tab
#ESC j reverse linefeed
#ESC k n duplex/local edit mode:
# n = 0 duplex edit mode
# n = 1 local edit mode
#ESC l n select virtual screen:
# n = 0 screen 1
# n = 1 screen 2
#ESC m save current config to NVRAM
#ESC n p1 select display screen:
# p1 = 0 screen 1
# p1 = 1 screen 2
# p1 = 2 screen 3
# p1 = 3 screen 4
#ESC o p1 p2 set characters/line and attribute:
# p1 = 0 80 chars/line
#
#ESC o p1 p2 set characters/line and attribute:
# p1 = 0 80 chars/line
# p1 = 1 132 chars/line
# p2 = 0 single width single height
# p2 = 1 single width double height
# p2 = 2 double width single height
# p2 = 3 double width double height
#
#ESC q insert mode on
#ESC r edit mode on
#ESC s send message all
#ESC t erase line to null
#ESC u clear monitor mode (see ESC U, ESC X)
#ESC v autopage mode on
#ESC w autopage mode off
#ESC x p1 p2 p3 define delimiter code...
#ESC y erase page to null
#
#ESC z 2 p1 p2 p3 p4 draw quadrangle:
# p1 = starting row
# p2 = starting column
# p3 = end row
# p4 = end column
#
#ESC { p1 p2 p3 p4 configure main port
# (baud, stop bits, parity, word length)
#
#ESC | p1 p2 text Ctrl-Y program function key with 'text':
# p1 = function key code:
# '1' - ';' normal f1- f11
# '<' - 'F' shifted f1 - f11
# p2 = program mode:
# 1 = FDX
# 2 = LOC
# 3 = HDX
# Ctrl-Y = terminator
# (use Ctrl-P to escape ^P, ^Y )
#
#ESC } p1 p2 p3 p4 configure printer port
# (baud, stop bits, parity, word length)
#ESC ~ send system status
#
# Codes and info from Peter Disdale <pete@pdlmail.demon.co.uk> 12 May 1997
#
# Entry is by esr going solely on above information and is UNTESTED.
# This actually looks a lot like a Televideo 9xx.
# This entry uses page 0 and is monochrome; I'm not brave enough to try
# to make color work without a test terminal. The :am: capability is a guess.
# The initialization string sets conversation mode, blinking underline cursor,
# full duplex, parallel attribute mode, display user status line, white
# foreground, black background, normal highlight.
#
icl6404|kds7372|icl6402|kds6402|ICL 6404 aka Kokusai Display Systems 7372:\
:am:bs:hs:\
:co#80:li#24:\
:al=\EE:bl=^G:bt=\EI:cl=\E*:cm=\E=%+ %+P%+P:cr=^M:ct=\E3:\
:dc=\EW:dl=\ER:ei=\Er:ho=^^:i1=\EC\E.3\EDF\EV1\Eg\E[0ZZ:\
:im=\Eq:mb=\E[2ZZ:me=\E[0ZZ:mk=\E[1ZZ:mr=\E[4ZZ:nd=^L:\
:nw=^_:rs=\Eo1:se=\E[%gh%{4}%^%Ph%gh%dZZ:so=\E[8ZZ:\
:st=\E1:ta=^I:ue=\E[%gh%{8}%^%Ph%gh%dZZ:up=^K:us=\E[8ZZ:\
:ve=\E.3:vi=\E.0:vs=\E.1:
icl6404-w|kds7372-w|ICL 6404 aka Kokusai Display Systems 7372 132 cols:\
:rs=\Eo1:tc=icl6404:
#### Interactive Systems Corp
#
# ISC used to sell OEMed and customized hardware to support ISC UNIX.
# ISC UNIX still exists in 1995, but ISC itself is no more; they got
# bought out by Sun.
#
# From: <cithep!eric> Wed Sep 16 08:06:44 1981
# (intext: removed obsolete ":ma=^K^P^R^L^L ::bc=^_:", also the
# ":le=^_:" later overridden -- esr)
intext|Interactive Systems Corporation modified owl 1200:\
:am:bs:\
:co#80:it#8:li#24:sg#1:\
:al=5.5*\020:bl=^G:bt=^Y:cd=5.5*\026J:ce=^Kp^R:cl=132\014:\
:cm=\017%+ %+ :cr=^M:dc=5.5*\022:dl=5.5*\021:do=^J:ei=^V<:\
:im=^V;:ip=5.5*:k0=^VJ\r:k1=^VA\r:k2=^VB\r:k3=^VC\r:\
:k4=^VD\r:k5=^VE\r:k6=^VF\r:k7=^VG\r:k8=^VH\r:k9=^VI\r:\
:kb=^H:kd=^J:ke=^V9:kh=^Z:kl=^_:kr=^^:\
:ks=\036\072\264\026%%:ku=^\:le=^H:nd=^^:se=^V#\040:sf=^J:\
:so=^V$,:ta=^I:up=^\:
intext2|intextii|INTERACTIVE modified owl 1251:\
:am:bw:ul:\
:co#80:li#24:sg#0:ug#0:\
:al=\E[L:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:ch=\E[%+^AG:\
:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:dc=\E[P:dl=\E[M:\
:do=\E[B:ei=:ic=\E[@:im=:k0=\E@\r:k1=\EP\r:k2=\EQ\r:\
:k3=\ES\r:k4=\ET\r:k5=\EU\r:k6=\EV\r:k7=\EW\r:k8=\EX\r:\
:k9=\EY\r:kb=^H:kd=\EB\r:kh=\ER\r:kl=\ED\r:kr=\EC\r:\
:ku=\EA\r:l0=REFRSH:l1=DEL CH:l2=TABSET:l3=GOTO:l4=+PAGE:\
:l5=+SRCH:l6=-PAGE:l7=-SRCH:l8=LEFT:l9=RIGHT:le=\E[D:\
:nd=\E[C:se=\E[2 D:sf=\E[S:so=\E[6 D:sr=\E[T:ta=^I:\
:ue=\E[2 D:up=\E[A:us=\E[18 D:\
:vb=\E[;;;;;;;;;2;;u\E[;;;;;;;;;1;;u:
#### Kimtron (abm, kt)
#
# Kimtron seems to be history, but as March 1998 these people are still
# offering repair services for Kimtron equipment:
#
# Com/Pair Monitor Service
# 1105 N. Cliff Ave.
# Sioux Falls, South Dakota 57103
#
# WATS voice: 1-800/398-4946
# POTS fax: +1 605/338-8709
# POTS voice: +1 605/338-9650
# Email: <compair@sd.cybernex.net>
# Internet/Web: <http://www.com-pair.com>
#
# Kimtron entries include (undocumented) codes for: enter dim mode,
# enter bold mode, enter reverse mode, turn off all attributes.
#
# Kimtron ABM 85 added by Dual Systems
# (abm85: removed duplicated ":kd=^J:" -- esr)
abm85|Kimtron ABM 85:\
:am:bs:bw:ms:\
:co#80:it#8:li#24:sg#1:ug#1:\
:al=\EE:bt=\EI:cd=\Ey:ce=\Et:cl=\E*:cm=\E=%+ %+ :dc=\EW:\
:dl=\ER:do=^J:ei=\Er:if=/usr/share/tabset/stdcrt:im=\EQ:\
:is=\EC\EX\Eg\En\E%\Er\E(\Ek\Em\Eq:kb=^H:kd=^J:kh=^^:\
:kl=^H:kr=^L:ku=^K:le=^H:nd=^L:se=\Ek:so=\Ej:ta=^I:ue=\Em:\
:up=^K:us=\El:
# Kimtron ABM 85H added by Dual Systems.
# Some notes about the abm85h entries:
# 1) there are several firmware revs of 85H in the world. Use abm85h-old for
# firmware revs prior to SP51
# 2) Make sure to use abm85h entry if the terminal is in 85h mode and the
# abm85e entry if it is in tvi920 emulation mode. They are incompatible
# in some places and NOT software settable i.e., :is: can't fix it)
# 3) In 85h mode, the arrow keys and special functions transmit when
# the terminal is in dup-edit, and work only locally in local-edit.
# Vi won't swallow `del char' for instance, but :ti: turns on
# dup-edit anyway so that the arrow keys will work right. If the
# arrow keys don't work the way you like, change :ti:, :te:, and
# :is:. Note that 920E mode does not have software commands to toggle
# between dup and local edit, so you get whatever was set last on the
# terminal.
# 4) :vb: attribute is nice, but seems too slow to work correctly
# (\Eb:pc:\Ed)
# 5) Make sure `hidden' attributes are selected. If `embedded' attributes
# are selected, the <xmc@> entry should be removed.
# 6) auto new-line should be on (selectable from setup mode only)
#
# From: Erik Fair <fair@ucbarpa> Sun Oct 27 07:21:05 1985
abm85h|Kimtron ABM 85H native mode:\
:hs:\
:sg@:\
:bl=^G:ds=\Ee:fs=^M:im=\EZ:\
:is=\EC\EN\EX\024\016\EA\Ea\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\EG0\Ed\E.4\El:\
:kd=^V:me=\E(\EG0:mh=\E):mk@:ts=\Eg\Ef:vb@:ve=\E.4:vs=\E.2:\
:tc=adm+sgr:tc=abm85:
abm85e|Kimtron ABM 85H in 920E mode:\
:sg@:\
:bl=^G:im=\EZ:\
:is=\EC\EX\EA\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\Ek\Eq\Em:\
:me=\E(\Ek:mh=\E):mr=\Ej:vb@:tc=abm85:
abm85h-old|oabm85h|o85h|Kimtron ABM 85H with old firmware rev.:\
:sg@:\
:bl=^G:im=\EZ:\
:is=\E}\EC\EX\Ee\En\E%\Er\E(\Ek\Em\Eq\Ed\ET\EC\E9\EF:\
:me=\E(\Ek:mh=\E):mr=\Ej:tc=abm85:
# From: <malman@bbn-vax.arpa>
# (kt7: removed obsolete :ma=^V^J^L :" -- esr)
kt7|kimtron model kt-7:\
:am:bs:\
:co#80:it#8:li#24:\
:al=\EE:bt=\EI:cd=\EY:ce=\ET:cl=^Z:cm=\E=%+ %+ :dc=\EW:\
:dl=\ER:do=^V:ei=:fs=\Eg:ho=^^:ic=\EQ:\
:if=/usr/share/tabset/stdcrt:im=:is=\El\E":k0=^AI\r:\
:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
:k7=^AF\r:k8=^AG\r:k9=^AH\r:kA=\EE:kB=\EI:kC=^Z:kD=\EW:\
:kE=\ET:kI=\EQ:kL=\ER:kS=\EY:kb=^H:kd=^V:kh=^^:kl=^H:kr=^L:\
:ku=^K:le=^H:mk@:nd=^L:ta=^I:ts=\Ef:up=^K:tc=adm+sgr:
# Renamed TB=^I to :ta:, BE=^G to :bl:, BS=^H to :kb:, N to :kS: (based on the
# other kt7 entry and the adjacent key capabilities). Removed EE which is
# identical to :mh:. Removed :ES=\EGD: which is some kind of highlight
# but we can't figure out what.
kt7ix|kimtron model kt-7 or 70 in IX mode:\
:am:bw:\
:co#80:it#8:li#25:\
:@7=\EY:PU=\EK:ac=jYk?lZm@nEqDt4uCvAwBx3:ae=\E%%:al=\EE:\
:as=\E$:bl=^G:bt=\EI:cd=\EY:ce=\ET:cl=\E*:cm=\E=%+ %+ :\
:cr=^M:dc=\EW:dl=\ER:do=^V:ds=\Ef\r:ei=:fs=^M:ho=^^:ic=\EQ:\
:im=:is=\EG0\E s\017\E~:k0=^AI\r:k1=^A@\r:k2=^AA\r:\
:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:k7=^AF\r:k8=^AG\r:\
:k9=^AH\r:kA=\EE:kB=\EI:kC=\E*:kE=\ET:kI=\EQ:kL=\ER:kN=\EJ:\
:kS=\EY:kb=^H:kd=\E[B:kh=^^:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:\
:mb=\EG2:me=\EG0:mh=\EG@:nd=^L:nw=^M^J:se=\EG0:sf=^J:\
:so=\EG4:ta=^I:ts=\Ef:ue=\EG0:up=^K:us=\EG8:ve=\E.3:vi=\E.0:
#### Microdata/MDIS
#
# This was a line of terminals made by McDonnell-Douglas Information Systems.
# These entries come direct from MDIS documentation. I have edited them only
# to move primary names of the form p[0-9] * to aliases, and to comment out
# :ae:/:as: in a couple of entries without <acsc> strings. I have
# also removed the change history; the last version indicates this is
# version 4.3 by A.Barkus, September 1990 (earliest entry is October 1989).
#
# McDonnell Information Systems Terminal Family History
# =========================================
#
# Prism-1, Prism-2 and P99:
# Ancient Microdata and CMC terminals, vaguely like Adds Regent 25.
#
# Prism-4 and Prism-5:
# Slightly less ancient range of Microdata terminals. Follow-on from
# Prism-2, but with many enhancements. P5 has eight display pages.
#
# Prism-6:
# A special terminal for use with library systems, primarily in Germany.
# Limited numbers. Similar functionality to P5 (except attributes?).
#
# Prism-7, Prism-8 and Prism-9:
# More recent range of MDIS terminals, in which P7 and P8
# replace the P4 & P5, with added functionality, and P9 is the flagship.
# The P9 has two emulation modes - P8 and ANSI - and includes a
# large number of the DEC VT220 control sequences. Both
# P8 and P9 support 80c/24ln/8pg and 132cl/24li/4pg formats.
#
# Prism-12 and Prism-14:
# Latest range, functionally very similar to the P9. The P14 has a
# black-on-white overscanning screen.
#
# The terminfo definitions given here are:
#
# p2 - Prism-2 (or Prism-1 or P99).
#
# p4 - Prism-4 (and older P7s & P8s).
# p5 - Prism-5 (or Prism-6).
#
# p7 - Prism-7.
# p8 - Prism-8 (in national or multinational mode).
# p8-w - 132 column version of p8.
# p9 - Prism-9 in ANSI mode.
# p9-w - 132 column version of p9.
# p9-8 - Prism-9 in Prism-8 emulation mode.
# p9-8-w - As p9-8, but with 132 columns.
#
# p12 - Prism-12 in ANSI mode.
# p12-w - 132 column version of p12.
# p12-m - Prism-12 in MDC emulation mode.
# p12-m-w - As p12-m, but with 132 columns.
# p14 - Prism-14 in ANSI mode.
# p14-w - 132 column version of p14.
# p14-m - Prism-14 in MDC emulation mode.
# p14-m-w - As p14-m, but with 132 columns.
#
# p2: Prism-2
# -----------
#
# Includes Prism-1 and basic P99 without SP or MP loaded.
# The simplest form of Prism-type terminal.
# Basic cursor movement and clearing operations only.
# No video attributes.
# Notes:
# Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
# value up, followed by backspace.
#
prism2|MDC Prism-2:\
:am:bw:ms:\
:co#80:li#24:\
:bl=^G:cd=\EJ:ce=\EK:cl=20\014:cr=^M:cv=\013%+ :do=^J:ho=^A:\
:kb=^H:kh=^A:le=^H:nd=^F:sf=^J:up=^Z:
# p4: Prism-4
# -----------
#
# Includes early versions of P7 & P8.
# Basic family definition for most Prisms (except P2 and P9 ANSI).
# Notes:
# Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
# value up, followed by backspace.
# Cursor key definitions removed because they interfere with vi and csh keys.
#
prism4|p4|P4|MDC Prism-4:\
:5i:am:bw:hs:ms:\
:co#80:li#24:sg#1:ug#1:ws#72:\
:bl=^G:cd=\EJ:ce=\EK:cl=20\014:cr=^M:cv=\013%+ :do=^J:\
:ds=\035\343\035\345:fs=^]\345:ho=^A:kb=^H:kh=^A:le=^H:\
:mb=^CB:me=^C\040:mh=^CA:mk=^CH:mr=^CD:nd=^F:pf=\ET:po=\ER:\
:ps=\EU:se=^C\040:sf=^J:so=^CD:ts=^]\343:ue=^C\040:up=^Z:\
:us=^CP:ve=^]\342:vi=^]\344:
# p5: Prism-5
# -----------
#
# Same definition as p4. Includes Prism-6 (not tested!).
# Does not use any multi-page features.
#
prism5|p5|P5|MDC Prism-5:\
:tc=p4:
# p7: Prism-7
# -----------
#
# Similar definition to p4. Uses ANSI cursor motion to avoid network problems.
# Notes:
# Use p4 for very early models of P7.
# Rev-index removed; can't send nulls to terminal in 8-bit modes.
#
prism7|p7|P7|MDC Prism-7:\
:ch@:cm=\E[%i%d;%dH:cv@:tc=p4:
# p8: Prism-8
# -----------
#
# Similar definition to p7. Uses ANSI cursor motion to avoid network problems.
# Supports national and multinational character sets.
# Notes:
# Alternate char set operations only work in multinational mode.
# Use p4 for very early models of P8.
# Rev-index removed; can't send nulls to terminal in 8-bit modes.
# (esr: commented out :as:/:ae: because there's no <acsc>)
#
prism8|p8|P8|MDC Prism-8:\
:ch=\E[%i%d`:cm=\E[%i%d;%dH:cv=\E[%i%dd:is=\E[<12h:tc=p4:
# p8-w: Prism-8 in 132 column mode
# --------------------------------
#
# 'Wide' version of p8.
# Notes:
# Rev-index removed; can't send nulls to terminal in 8-bit modes.
#
prism8-w|p8-w|P8-W|MDC Prism-8 in 132 column mode:\
:co#132:\
:is=\E[<12h\E[<14h:tc=p8:
# p9: Prism-9 in ANSI mode
# -------------------------
#
# The "flagship" model of this generation of terminals.
# ANSI X3.64 (ISO 6429) standard sequences, plus many DEC VT220 ones.
# Notes:
# Tabs only reset by "reset". Otherwise assumes default (8 cols).
# Fixes to deal with terminal firmware bugs:
# . 'ri' uses insert-line since rev index doesn't always
# . 'sgr0' has extra '0' since esc[m fails
# . 'fsl' & 'dsl' use illegal char since cr is actioned wrong on line 25
# Not covered in the current definition:
# . Labels
# . Programming Fn keys
# . Graphic characters (defaults correctly to vt100)
# . Padding values (sets xon)
# (esr: commented out :as:/:ae: because there's no <acsc>)
#
prism9|p9|P9|MDC Prism-9 in ANSII mode:\
:5i:am:bw:hs:ms:xn:xo:\
:co#80:it#8:li#24:vt#3:ws#72:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:F1=\E[23~:\
:F2=\E[24~:F3=\E[25~:F4=\E[26~:F5=\E[28~:F6=\E[29~:\
:F7=\E[31~:F8=\E[32~:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:\
:al=\E[L:bl=^G:bt=\E[Z:cd=10\E[J:ce=\E[K:ch=\E[%i%d`:cl=^L:\
:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%d%%v:ct=\E[3g:\
:cv=\E[%i%dd:dc=\E[P:dl=\E[M:do=^J:ds=\E[%}\024:ec=\E[%dX:\
:ei=\E[4l:fs=^T:ho=\E[H:im=\E[4h:is=\E[&p\E[<12l\E F:\
:k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~:k5=\E[15~:\
:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:k;=\E[21~:kC=^L:\
:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:\
:mb=\E[5m:md=\E[1m:me=\E[m\017:mp=\E[32%{:mr=\E[7m:\
:nd=\E[C:nw=^M^J:pf=\E[4i:po=\E[5i:ps=\E[i:rc=\E[%z:\
:rp=\E[%r%db%.:\
:rs=\E[&p\E[<12l\E F\E[3g\E[9;17;25;33;41;49;57;65;73 N:\
:sc=\E[%y:se=\E[27m:sf=^J:so=\E[7m:sr=\E[L:st=\EH:ta=^I:\
:ts=\E[%i%d%%}:ue=\E[24m:up=\E[A:us=\E[4m:ve=\E[<4h:\
:vi=\E[<4l:
# p9-w: Prism-9 in 132 column mode
# --------------------------------
#
# 'Wide' version of p9.
#
prism9-w|p9-w|P9-W|MDC Prism-9 in 132 column mode:\
:co#132:\
:is=\E[&p\E[<12l\E F\E[<14h:\
:rs=\E[&p\E[<12l\E F\E[<14h:tc=p9:
# p9-8: Prism-9 in P8 mode
# ------------------------
#
# P9 terminal in P8 emulation mode.
# Similar to p8 definition.
# Insertion and deletion operations possible.
#
prism9-8|p9-8|P9-8|MDC Prism-9 in P8 mode:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:IC=\E[%d@:al=\E[L:dc=\E[P:\
:dl=\E[M:ei=:ic=\E[@:im=:tc=p8:
# p9-8-w: Prism-9 in P8 and 132 column modes
# ------------------------------------------
#
# P9 terminal in P8 emulation mode and 132 column mode.
#
prism9-8-w|p9-8-w|P9-8-W|MDC Prism-9 in Prism 8 emulation and 132 column mode:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:IC=\E[%d@:al=\E[L:dc=\E[P:\
:dl=\E[M:ei=:ic=\E[@:im=:tc=p8-w:
# p12: Prism-12 in ANSI mode
# ---------------------------
#
# See p9 definition.
#
prism12|p12|P12|MDC Prism-12 in ANSI mode:\
:tc=p9:
# p12-w: Prism-12 in 132 column mode
# ----------------------------------
#
# 'Wide' version of p12.
#
prism12-w|p12-w|P12-W|MDC Prism-12 in 132 column mode:\
:tc=p9-w:
# p12-m: Prism-12 in MDC emulation mode
# -------------------------------------
#
# P12 terminal in MDC emulation mode.
# Similar to p8 definition.
# Insertion and deletion operations possible.
#
prism12-m|p12-m|P12-M|MDC Prism-12 in MDC emulation mode:\
:tc=p9-8:
# p12-m-w: Prism-12 in MDC emulation and 132 column modes
# -------------------------------------------------------
#
# P12 terminal in MDC emulation mode and 132 column mode.
#
prism12-m-w|p12-m-w|P12-M-W|MDC Prism-12 in MDC emulation and 132 column mode:\
:tc=p9-8-w:
# p14: Prism-14 in ANSII mode
# ---------------------------
#
# See p9 definition.
#
prism14|p14|P14|MDC Prism-14 in ANSII mode:\
:tc=p9:
# p14-w: Prism-14 in 132 column mode
# ----------------------------------
#
# 'Wide' version of p14.
#
prism14-w|p14-w|P14-W|MDC Prism-14 in 132 column mode:\
:tc=p9-w:
# p14-m: Prism-14 in MDC emulation mode
# -------------------------------------
#
# P14 terminal in MDC emulation mode.
# Similar to p8 definition.
# Insertion and deletion operations possible.
#
prism14-m|p14-m|P14-M|MDC Prism-14 in MDC emulation mode:\
:tc=p9-8:
# p14-m-w: Prism-14 in MDC emulation and 132 column modes
# -------------------------------------------------------
#
# P14 terminal in MDC emulation mode and 132 column mode.
#
prism14-m-w|p14-m-w|P14-M-W|MDC Prism-14 in MDC emulation and 132 column mode:\
:tc=p9-8-w:
# End of McDonnell Information Systems Prism definitions
# These things were popular in the Pick database community at one time
# From: George Land <georgeland@aol.com> 24 Sep 1996
p8gl|prism8gl|McDonnell-Douglas Prism-8 alternate definition:\
:am:bw:hs:mi:\
:co#80:li#24:ma#1:sg#1:ug#1:ws#78:\
:F2=^AJ\r:F3=^AK\r:F4=^AL\r:F5=^AM\r:F6=^AN\r:F7=^AO\r:\
:bl=^G:cd=\EJ:ce=\EK:cl=^L:cm=\E[%i%d;%dH:cr=^M:dc=\040^H:\
:dl=^P:do=^J:ho=^A:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:\
:k5=^AD\r:k6=^AE\r:k7=^AF\r:k8=^AG\r:k9=^AH\r:k;=^AI\r:\
:kD=\040^H:kE=\EK:kL=^P:kS=\EJ:kb=^H:kd=^J:kh=^A:kl=^U:kr=^F:\
:ku=^Z:l1=F1:l2=F2:l3=F3:l4=F4:l5=F5:l6=F6:l7=F7:l8=F8:l9=F9:\
:la=F10:le=^U:mb=^CB:me=^C\040:mh=^CA:mk=^CH:mr=^CD:nd=^F:\
:nw=^J^M:pc=\200:se=^C\040:sf=^J:so=^CE:ue=^C\040:up=^Z:\
:us=^C0:
#### Microterm (act, mime)
#
# The mime1 entries refer to the Microterm Mime I or Mime II.
# The default mime is assumed to be in enhanced act iv mode.
#
# New "safe" cursor movement (5/87) from <reuss@umd5.umd.edu>. Prevents
# freakout with out-of-range args on Sytek multiplexors. No :so=^N: and
# :se=^N: since it gets confused and it's too dim anyway. No :ic:
# since Sytek insists ^S means xoff.
# (act4: found ":ic=2^S:ei=:im=:ip=.1*^V:" commented out in 8.3 -- esr)
act4|microterm|microterm act iv:\
:am:bs:\
:co#80:li#24:\
:al=2.3*\001<2.3*/>:bl=^G:cd=2.2*\037:ce=.1*\036:\
:cl=12\014:cm=\024%+^X%>/0%+P:cr=^M:dc=.1*\004:\
:dl=2.3*\027:do=^K:ho=^]:kd=^K:kl=^H:kr=^X:ku=^Z:le=^H:nd=^X:\
:sf=^J:up=^Z:
# The padding on :sr: and :ta: for act5 and mime is a guess and not final.
# The act 5 has hardware tabs, but they are in columns 8, 16, 24, 32, 41 (!)...
# (microterm5: removed obsolete ":ma==^Z^P^Xl^Kj:" -- esr)
act5|microterm5|microterm act v:\
:kd=^K:kl=^H:kr=^X:ku=^Z:sr=3\EH:uc=^H\EA:tc=act4:
# Mimes using brightness for standout. Half bright is really dim unless
# you turn up the brightness so far that lines show up on the screen.
mime-fb|full bright mime1:\
:is=^S\E:se=^S:so=^Y:tc=mime:
mime-hb|half bright mime1:\
:is=^Y\E:se=^Y:so=^S:tc=mime:
# (mime: removed obsolete ":ma=^X ^K^J^Z^P:"; removed ":do=^K:" that overrode
# the more plausible ":do=^J:" -- esr)
# uc was at one time disabled to get around a curses bug, be wary of it
mime|mime1|mime2|mimei|mimeii|microterm mime1:\
:am:bs:\
:co#80:it#8:li#24:vt#9:\
:al=80\001:bl=^G:cd=^_:ce=^^:cl=^]^C:cm=\024%+^X%> 0%+P:\
:cr=^M:dl=80\027:do=^J:ho=^]:is=^S\E^Q:kd=^K:kl=^H:kr=^X:\
:ku=^Z:le=^H:nd=^X:sf=^J:sr=3\022:ta=2\011:uc=^U:up=^Z:
# These termcaps (for mime2a) put the terminal in low intensity mode
# since high intensity mode is so obnoxious.
mime2a-s|microterm mime2a (emulating an enhanced soroc iq120):\
:am:bs:\
:co#80:li#24:\
:al=20*\001:bl=^G:cd=20*\EJ:ce=\EK:cl=\EL:cm=\E=%+ %+ :\
:cr=^M:dc=\ED:dl=20*\027:do=^J:ei=^Z:ho=^^:im=\EE:ip=2:\
:is=\E):kd=^J:kl=^H:kr=^L:ku=^K:le=^H:nd=^L:se=\E;:sf=^J:\
:so=\E\072:sr=\EI:ue=\E7:up=\EI:us=\E6:
# This is the preferred mode (but ^X can't be used as a kill character)
mime2a|mime2a-v|microterm mime2a (emulating an enhanced vt52):\
:bs:\
:co#80:it#8:li#24:\
:al=20*\001:bl=^G:cd=20*\EQ:ce=\EP:cl=\EL:cm=\EY%+ %+ :\
:cr=^M:dc=^N:dl=20*\027:do=^J:ei=^Z:ho=\EH:im=^O:ip=2:is=^Y:\
:kd=\EB:kl=\ED:kr=\EC:ku=\EA:le=^H:nd=\EC:se=\E9:sf=^J:\
:so=\E8:sr=\EA:ta=^I:ue=\E5:up=\EA:us=\E4:
# (mime3a: removed obsolete ":ma=^X ^K^J^Z^P:" -- esr)
mime3a|mime1 emulating 3a:\
:am@:\
:kd=^K:kl=^H:kr=^X:ku=^Z:tc=adm3a:
mime3ax|mime-3ax|mime1 emulating enhanced 3a:\
:it#8:\
:al=80\001:cd=^_:ce=^X:dl=80\027:ta=3\011:tc=mime3a:
# Wed Mar 9 18:53:21 1983
# We run our terminals at 2400 baud, so there might be some timing problems at
# higher speeds. The major improvements in this model are the terminal now
# scrolls down and insert mode works without redrawing the rest of the line
# to the right of the cursor. This is done with a bit of a kludge using the
# exit graphics mode to get out of insert, but it does not appear to hurt
# anything when using vi at least. If you have some users using act4s with
# programs that use curses and graphics mode this could be a problem.
mime314|mm314|mime 314:\
:am:\
:co#80:li#24:\
:al=^A:cd=^_:ce=^^:cl=^L:cm=\024%.%.:dc=^D:dl=^W:ei=^V:ho=^]:\
:im=^S:kd=^K:kl=^H:kr=^X:ku=^Z:le=^H:nd=^X:ta=^I:up=^Z:
# Microterm mime 340 from University of Wisconsin
mm340|mime340|mime 340:\
:co#80:li#24:\
:al=46\EU:cd=2*\037:ce=2.1\EL:cl=12\032:cm=\E=%+ %+ :\
:cr=^M:dc=2.1*\E#:dl=49.6\EV:do=^J:is=\E,:kb=^H:kd=^J:kl=^H:\
:ku=^K:le=^H:nd=^L:nw=^M^J:sf=^J:ta=^I:up=^K:
# This came from University of Wisconsin marked "astro termcap for jooss".
# (mt4520-rv: removed obsolete ":kn#4:" and incorrect ":ri=\E[C:";
# also added <rmam>/<smam> based on the init string -- esr)
mt4520-rv|micro-term 4520 reverse video:\
:am:hs:ms:xn:xo:\
:co#80:it#8:li#24:ws#80:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
:LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:UP=\E[%dA:\
:al=\E[L:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:\
:cr=^M:cs=\E[%i%d;%dr:ct=\E[g:dc=\E[P:dl=\E[M:do=\E[B:ei=:\
:fs=\E[?5l\E[?5h:ho=\E[H:ic=\E[@:im=:\
:is=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[1;24r\E[24;1H\E[H\E[J:\
:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:kb=^H:kd=\E[B:kh=\E[H:\
:kl=\E[D:kr=\E[C:ku=\E[A:le=\E[D:ll=\E[24;1H:me=\E[m:\
:nd=\E[C:nw=\EE:\
:r1=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[H\E[J:\
:rc=\E8:rf=/usr/share/tabset/vt100:sc=\E7:se=\E[0m:\
:sf=\ED:so=\E[7m:sr=\EM:st=\EH:ta=^I:ts=\E[25;1H:ue=\E[24m:\
:up=\E[A:us=\E[4m:vb=\E[?5l\E[?5h:ve=\E[0V\E8:\
:vs=\E7\E[0U:
# Fri Aug 5 08:11:57 1983
# This entry works for the ergo 4000 with the following setups:
# ansi,wraparound,newline disabled, xon/xoff disabled in both
# setup a & c.
#
# WARNING!!! There are multiple versions of ERGO 4000 microcode
# Be advised that very early versions DO NOT WORK RIGHT !!
# Microterm does have a ROM exchange program- use it or lose big
# (ergo400: added <rmam>/<smam> based on the init string -- esr)
ergo4000|microterm ergo 4000:\
:da:db:ms:\
:co#80:li#66:\
:RA=\E[?7l:SA=\E[?7m:al=5*\E[1L:bl=^G:cd=15\E[0J:\
:ce=13\E[0K:cl=80\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:\
:dc=80\E[1P:dl=5*\E[1M:do=\E[B:ei=\E[4l:im=6\E[4h:\
:is=300\E<\E=\E[?1l\E[?4l\E[?5l\E[?7h\E[?8h:k1=\EOP:\
:k2=\EOQ:k3=\EOR:k4=\EOS:kd=\E[B:ke=4\E=:kl=\E[D:kr=\E[C:\
:ks=4\E=:ku=\E[A:l1=pf1:l2=pf2:l3=pf3:l4=pf4:le=^H:\
:me=20\E[m:nd=\E[C:se=20\E[m:sf=20*\ED:so=20\E[7m:\
:sr=20*\EM:ta=^I:up=\E[A:
#### NCR
#
# NCR's terminal group was merged with AT&T's when AT&T bought the company.
# For what happened to that group, see the ADDS section.
#
# There is an NCR4103 terminal that's just a re-badged Wyse-50.
#
# The following vendor-supplied termcaps were captured from the Boundless
# Technologies site, 8 March 1998. I removed all-upper-case names that were
# identical, except for case, to lower-case ones. I also uncommented the acsc
# capabilities.X
#
# The Intecolor emulation of the NCR 2900/260C color terminal is basically a
# DEC vt200/300 with color capabilities added.
ncr260intan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard:\
:Co#8:pa#64:\
:AB=\E[4%dm:AF=\E[3%dm:op=\E[0m:tc=ncr260vt300an:
# The Intecolor emulation of the NCR 2900/260C color terminal is basically a
# DEC vt200/300 with color capabilities added.
ncr260intwan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard:\
:Co#8:pa#64:\
:AB=\E[4%dm:AF=\E[3%dm:op=\E[0m:tc=ncr260vt300wan:
# The Intecolor emulation of the NCR 2900/260C color terminal is basically a
# DEC vt200/300 with color capabilities added.
ncr260intpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard:\
:Co#8:pa#64:\
:AB=\E[4%dm:AF=\E[3%dm:op=\E[0m:tc=ncr260vt300pp:
# The Intecolor emulation of the NCR 2900/260C color terminal is basicly a
# DEC vt200/300 with color capabilities added.
ncr260intwpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard in 132 column mode:\
:Co#8:pa#64:\
:AB=\E[4%dm:AF=\E[3%dm:op=\E[0m:tc=ncr260vt300wpp:
# This definition for ViewPoint supports several attributes. This means
# that it has magic cookies (extra spaces where the attributes begin).
# Some applications do not function well with magic cookies. The System
# Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
# If supporting various attributes is not vital, 'xmc#1' and the extra
# attributes can be removed.
# Mapping to ASCII character set ('acsc' capability) can also be
# restored if needed.
# (rmacs/smacs removed for consistency)
# (acsc removed to fit entry within 1023 bytes)
# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
ncr260vppp|NCR 2900_260 viewpoint:\
:am:bw:hs:km:mi:ms:xo:\
:co#80:li#24:sg#1:ug#1:\
:K1=^A:K3=\EJ:K4=\ET:K5=\EJ:al=2\EM:bl=^G:bt=\EI:cd=2\Ek:\
:ce=2\EK:cl=40\014:cm=5\EY%+ %+ :cr=2\r:dc=2\EW:dl=2\El:\
:do=2\n:ds=\E`c:ei=\Er:fs=^M:ho=2\036:im=\Eq:\
:is=100\Ee6\E~%\E+\E`\072\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7:\
:k1=^B1\r:k2=^B2\r:k3=^B3\r:k4=^B4\r:k5=^B5\r:k6=^B6\r:\
:k7=^B7\r:k8=^B8\r:k9=^B9\r:kD=\EW:kI=\Eq:kN=\EJ:kP=\EJ:\
:kb=^H:kd=^J:kh=^A:kl=^U:kr=^F:ku=^Z:le=2\010:ll=5\001:\
:mb=\EG2:me=\EG0\EH\003:mh=\EGp:mr=\EG4:nd=2\006:nw=2\037:\
:rs=100\Ee6\E~%\E+\E`\072\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7:\
:se=\EG0:sf=2\n:so=\EG4:sr=2\Ej:st=\E1:ta=^I:ts=\EF:ue=\EG0:\
:up=2\032:us=\EG8:ve=\E`5:vi=\E`0:
ncr260vpwpp|NCR 2900_260 viewpoint wide mode:\
:co#132:\
:cm=30\Ea%i%dR%dC:\
:is=100\Ee6\E~%\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7:\
:rs=100\Ee6\E~%\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7:\
:tc=ncr260vppp:
ncr260vt100an|NCR 2900_260 vt100 with ansi kybd:\
:am:hs:mi:ms:xn:xo:\
:Nl#32:co#80:li#24:\
:%0=\E[29~:%1=\E[28~:*6=\E[4~:@0=\E[1~:AL=5\E[%dL:\
:DC=5\E[%dP:DL=5\E[%dM:DO=5\E[%dB:IC=5\E[%d@:LE=5\E[%dD:\
:RI=5\E[%dC:SF=5\E[%dE:UP=5\E[%dA:\
:ac=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~:ae=^O:\
:al=5\E[L:as=^N:bl=^G:cb=3\E[1K:cd=5\E[0J:ce=3\E[0K:\
:ch=40\E[%dG:cl=20\E[2J\E[1;1H:cm=10\E[%i%d;%dH:cr=1\r:\
:cs=\E[%i%d;%dr:ct=\E[3g:cv=40\E[%dd:dc=5\E[1P:dl=5\E[M:\
:do=5\E[B:ds=\E[0$~\E[1$~:ec=\E[%dX:ei=\E[4l:fs=\E[0$}:\
:ho=1\E[H:im=\E[4h:\
:is=200\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>:\
:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=^H:kd=\EOB:\
:ke=\E[?1l\E>:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:\
:le=5\E[D:mb=\E[5m:md=\E[1m:me=20\E[0m:mk=\E[8m:mr=\E[7m:\
:nd=5\E[C:nw=5\EE:rc=\E8:\
:rs=200\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>:\
:sc=\E7:se=\E[0m:sf=5\ED:so=\E[1;7m:sr=5\EM:st=\EH:ta=^I:\
:ts=\E[2$~\E[1$}:ue=\E[0m:up=5\E[A:us=\E[4m:ve=\E[?25h:\
:vi=\E[?25l:tc=vt220+keypad:
ncr260vt100wan|NCR 2900_260 vt100 wide mode ansi kybd:\
:co#132:\
:cm=30\E[%i%d;%dH:\
:is=200\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>:\
:rs=200\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>:\
:tc=ncr260vt100an:
ncr260vt100pp|NCR 2900_260 vt100 with PC+ kybd:\
:@7=\E[5~:K1=\E[H:K2=\E[V:K3=\EOu:K5=\E[U:\
:is=200\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>:\
:kD=\E[4~:kI=\E[1~:kN=\E[6~:kP=\E[3~:kd=\E[B:ke=\E>:\
:kh=\E[2~:kl=\E[D:kr=\E[C:ks=\E=:ku=\E[A:l1=pf1:l2=pf2:\
:l3=pf3:l4=pf4:\
:rs=200\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>:\
:tc=ncr260vt100an:
ncr260vt100wpp|NCR 2900_260 vt100 wide mode pc+ kybd:\
:co#132:\
:cm=30\E[%i%d;%dH:\
:is=200\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>:\
:rs=200\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>:\
:tc=ncr260vt100pp:
# (sgr removed to fit entry within 1023 bytes)
# (acsc removed to fit entry within 1023 bytes)
# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
ncr260vt200an|NCR 2900_260 vt200 with ansi kybd:\
:am:hs:mi:ms:xn:xo:\
:co#80:li#24:\
:AL=5\E[%dL:DC=5\E[%dP:DL=5\E[%dM:DO=5\E[%dB:IC=5\E[%d@:\
:LE=5\E[%dD:RI=5\E[%dC:SF=5\E[%dE:UP=5\E[%dA:ae=20\017:\
:al=5\E[L:as=20\016:bl=^G:cd=\E[0J:ce=5\E[0K:\
:cl=20\E[2J\E[1;1H:cm=10\E[%i%d;%dH:cr=1\r:\
:cs=5\E[%i%d;%dr:ct=\E[3g:dc=5\E[1P:dl=5\E[M:do=5\E[B:\
:ds=\E[0$~\E[1$~:ec=5\E[%dX:ei=\E[4l:fs=\E[0$}:ho=\E[H:\
:im=\E[4h:\
:is=200\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>:\
:k0=\EOy:k2=\EOQ:k3=\EOR:k4=\EOS:k5=\E[M:k6=\E[17~:\
:k7=\E[18~:k8=\E[19~:k9=\E[20~:kD=\E[3~:kI=\E[2~:kN=\E[6~:\
:kP=\E[5~:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:kr=\EOC:\
:ks=\E[?1h\E=:ku=\EOA:le=5\E[D:mb=\E[5m:md=\E[1m:\
:me=20\E[0m:mr=\E[7m:nd=5\E[C:nw=\EE:rc=\E8:\
:rs=200\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>:\
:sc=\E7:se=\E[27m:sf=5\ED:so=\E[7m:sr=5\EM:st=\EH:ta=^I:\
:ts=\E[2$~\E[1$}:ue=\E[24m:up=5\E[A:us=\E[4m:ve=\E[?25h:\
:vi=\E[?25l:tc=vt220+keypad:
ncr260vt200wan|NCR 2900_260 vt200 wide mode ansi kybd:\
:co#132:\
:cm=30\E[%i%d;%dH:\
:is=200\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H:\
:rs=200\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H:\
:tc=ncr260vt200an:
ncr260vt200pp|NCR 2900_260 vt200 with pc+ kybd:\
:@7=\E[1~:K1=\E[H:K2=\E[V:K3=\EOu:K5=\E[U:kD=\E[4~:\
:kI=\E[2~:kN=\E[6~:kP=\E[5~:kd=\E[B:ke=\E>:kh=\E[H:kl=\E[D:\
:kr=\E[C:ks=\E=:ku=\E[A:l1=pf1:l2=pf2:l3=pf3:l4=pf4:\
:tc=ncr260vt200an:
ncr260vt200wpp|NCR 2900_260 vt200 wide mode pc+ kybd:\
:co#132:\
:cm=30\E[%i%d;%dH:\
:is=200\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>:\
:rs=200\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>:\
:tc=ncr260vt200pp:
# (sgr removed to fit entry within 1023 bytes)
# (acsc removed to fit entry within 1023 bytes)
# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
ncr260vt300an|NCR 2900_260 vt300 with ansi kybd:\
:am:hs:mi:ms:xn:xo:\
:co#80:li#24:\
:AL=5\E[%dL:DC=5\E[%dP:DL=5\E[%dM:DO=5\E[%dB:IC=5\E[%d@:\
:LE=5\E[%dD:RI=5\E[%dC:SF=5\E[%dE:UP=5\E[%dA:ae=20\017:\
:al=5\E[L:as=20\016:bl=^G:cd=\E[0J:ce=5\E[0K:\
:cl=20\E[2J\E[1;1H:cm=10\E[%i%d;%dH:cr=1\r:\
:cs=5\E[%i%d;%dr:ct=\E[3g:dc=5\E[1P:dl=5\E[M:do=5\E[B:\
:ds=\E[0$~\E[1$~:ec=5\E[%dX:ei=\E[4l:fs=\E[0$}:ho=\E[H:\
:im=\E[4h:\
:is=200\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>:\
:k0=\EOy:k5=\E[M:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:\
:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=^H:kd=\EOB:\
:ke=\E[?1l\E>:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:\
:le=5\E[D:mb=\E[5m:md=\E[1m:me=20\E[0m:mr=\E[7m:nd=5\E[C:\
:nw=\EE:rc=\E8:\
:rs=200\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>:\
:sc=\E7:se=\E[27m:sf=5\ED:so=\E[7m:sr=5\EM:st=\EH:ta=^I:\
:ts=\E[2$~\E[1$}:ue=\E[24m:up=5\E[A:us=\E[4m:ve=\E[?25h:\
:vi=\E[?25l:tc=vt220+keypad:
ncr260vt300wan|NCR 2900_260 vt300 wide mode ansi kybd:\
:co#132:\
:cm=30\E[%i%d;%dH:\
:is=200\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H:\
:rs=200\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H:\
:tc=ncr260vt300an:
ncr260vt300pp|NCR 2900_260 vt300 with pc+ kybd:\
:@7=\E[1~:K1=\E[H:K2=\E[V:K3=\EOu:K5=\E[U:kD=\E[4~:\
:kI=\E[2~:kN=\E[6~:kP=\E[5~:kd=\E[B:ke=\E>:kh=\E[H:kl=\E[D:\
:kr=\E[C:ks=\E=:ku=\E[A:l1=pf1:l2=pf2:l3=pf3:l4=pf4:\
:tc=ncr260vt300an:
NCR260VT300WPP|ncr260vt300wpp|NCR 2900_260 vt300 wide mode pc+ kybd:\
:co#132:\
:cm=30\E[%i%d;%dH:\
:is=200\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>:\
:rs=200\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>:\
:tc=ncr260vt300pp:
# This terminfo file contains color capabilities for the Wyse325 emulation of
# the NCR 2900/260C color terminal. Because of the structure of the command
# (escape sequence) used to set color attributes, one of the fore/background
# colors must be preset to a given value. I have set the background color to
# black. The user can change this setup by altering the last section of the
# 'setf' definition. The escape sequence to set color attributes is
# ESC d y <foreground_color> <background_color> 1
# In addition, the background color can be changed through the desk accessories.
# The capablitiy 'op' sets colors to green on black (default combination).
#
# NOTE: The NCR Unix System Administrator's Shell will not function properly
# if the 'pairs' capability is defined. Un-Comment the 'pairs'
# capability and recompile if you wish to have it included.
#
# (rmacs/smacs removed for consistency)
# (acsc removed to fit entry within 1023 bytes)
# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
ncr260wy325pp|NCR 2900_260 wyse 325:\
:am:bw:hs:km:mi:ms:xo:\
:co#80:li#24:\
:K1=^^:K2=\EJ:K4=\ET:K5=\EK:al=5\EE:bl=^G:bt=\EI:cd=5\Ey:\
:ce=5\Et:cl=10\E*:cm=10\E=%+ %+ :cr=^M:ct=\E0:dc=50\EW:\
:dl=5\ER:do=5\n:ds=\E`c:ei=\Er:fs=^M:ho=5\036:im=\Eq:\
:is=100\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\072\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7:\
:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
:k7=^AF\r:k8=^AG\r:k9=^AH\r:kD=\EW:kI=\Eq:kN=\EK:kP=\EJ:\
:kb=^H:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:le=5\010:mb=\EG2:\
:me=15\EG0\EcB0\EcD:mr=\EG4:nd=5\014:nw=5\037:\
:rs=100\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\072\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7:\
:se=\EG0:sf=5\n:so=\EGt:sr=5\Ej:st=\E1:ta=^I:ts=\EF:ue=\EG0:\
:up=5\013:us=\EG8:ve=\E`1:vi=\E`0:vs=\E`5:
ncr260wy325wpp|NCR 2900_260 wyse 325 wide mode:\
:co#132:\
:cm=30\Ea%i%dR%dC:\
:is=100\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7:\
:rs=100\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7:\
:tc=ncr260wy325pp:
# This definition for Wyse 350 supports several attributes. This means
# that it has magic cookies (extra spaces where the attributes begin).
# Some applications do not function well with magic cookies. The System
# Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
# If supporting various attributes is not vital, 'xmc#1' and the extra
# attributes can be removed.
# Mapping to ASCII character set ('acsc' capability) can also be
# restored if needed.
# In addition, color capabilities have been added to this file. The drawback,
# however, is that the background color has to be black. The foreground colors
# are numbered 0 through 15.
#
# NOTE: The NCR Unix System Administrator's Shell does not function properly
# with the 'pairs' capability defined as below. If you wish to
# have it included, Un-comment it and recompile (using 'tic').
#
# (rmacs/smacs removed for consistency)
# (acsc removed to fit entry within 1023 bytes)
# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
ncr260wy350pp|NCR 2900_260 wyse 350:\
:am:bw:hs:km:mi:ms:xo:\
:co#80:li#24:sg#1:ug#1:\
:K1=^^:K4=\ET:K5=\EK:al=5\EE:bl=^G:bt=\EI:cd=5\Ey:ce=5\Et:\
:cl=20\E+:cm=40\E=%+ %+ :cr=^M:ct=\E0:dc=50\EW:dl=5\ER:\
:do=5\n:ds=\E`c:ei=\Er:fs=^M:ho=10\036:im=\Eq:\
:is=100\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\072\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7:\
:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
:k7=^AF\r:k8=^AG\r:k9=^AH\r:kD=\EW:kI=\Eq:kN=\EK:kP=\EJ:\
:kb=^H:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:le=5\010:mb=\EG2:\
:me=\EG0\EH\003\EcD:mh=\EGp:mr=\EG4:nd=5\014:nw=5\037:\
:rs=100\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\072\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7:\
:se=\EG0:sf=5\n:so=\EGt:sr=5\Ej:st=\E1:ta=^I:ts=\EF:ue=\EG0:\
:up=5\013:us=\EG8:ve=\E`1:vi=\E`0:vs=\E`5:
ncr260wy350wpp|NCR 2900_260 wyse 350 wide mode:\
:co#132:\
:cm=30\Ea%i%dR%dC:\
:is=200\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7:\
:rs=200\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7:\
:tc=ncr260wy350pp:
# This definition for Wyse 50+ supports several attributes. This means
# that it has magic cookies (extra spaces where the attributes begin).
# Some applications do not function well with magic cookies. The System
# Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
# If supporting various attributes is not vital, 'xmc#1' and the extra
# attributes can be removed.
# Mapping to ASCII character set ('acsc' capability) can also be
# restored if needed.
# (ncr260wy50+pp: originally contained commented-out
# <acsc=j5k3l2m1n8q:t4u9v=w0x6>, as well as the commented-out one there -- esr)
# (rmacs/smacs removed for consistency)
# (acsc removed to fit entry within 1023 bytes)
# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
ncr260wy50+pp|NCR 2900_260 wyse 50+:\
:am:bw:hs:km:mi:ms:xo:\
:co#80:li#24:sg#1:ug#1:\
:K1=^^:K4=\ET:K5=\EK:al=5\EE:bl=^G:bt=5\EI:cd=5\EY:ce=5\ET:\
:cl=20\E+:cm=30\E=%+ %+ :cr=^M:ct=5\E0:dc=50\EW:dl=5\ER:\
:do=5\n:ds=\E`c:ei=\Er:fs=^M:ho=10\036:im=\Eq:\
:is=100\Ee6\E~"\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\072\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7:\
:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
:k7=^AF\r:k8=^AG\r:k9=^AH\r:kD=\EW:kI=\Eq:kN=\EK:kP=\EJ:\
:kb=^H:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:le=5\010:mb=\EG2:\
:me=15\EG0\EH\003:mh=\EGp:mr=\EG4:nd=5\014:nw=5\037:\
:rs=100\Ee6\E~"\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\072\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7:\
:se=\EG0:sf=5\n:so=\EGt:sr=5\Ej:st=5\E1:ta=5\011:ts=\EF:\
:ue=\EG0:up=5\013:us=\EG8:ve=\E`1:vi=\E`0:vs=\E`5:
ncr260wy50+wpp|NCR 2900_260 wyse 50+ wide mode:\
:co#132:\
:cm=30\Ea%i%dR%dC:\
:is=200\Ee6\E~"\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7:\
:rs=200\Ee6\E~"\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7:\
:tc=ncr260wy50+pp:
# (rmacs/smacs removed for consistency)
# (acsc removed to fit entry within 1023 bytes)
# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
ncr260wy60pp|NCR 2900_260 wyse 60:\
:am:bw:hs:km:mi:ms:xo:\
:co#80:li#24:\
:K1=^^:K2=\EJ:K4=\ET:K5=\EK:al=5\EE:bl=^G:bt=15\EI:cd=5\Ey:\
:ce=5\Et:cl=100\E*:cm=10\E=%+ %+ :cr=^M:ct=15\E0:dc=50\EW:\
:dl=5\ER:do=5\n:ds=\E`c:ei=\Er:fs=^M:ho=25\036:im=\Eq:\
:is=100\Ee6\E~4\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\072\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7:\
:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
:k7=^AF\r:k8=^AG\r:k9=^AH\r:kD=\EW:kI=\Eq:kN=\EK:kP=\EJ:\
:kb=^H:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:le=5\010:mb=\EG2:\
:me=15\EG0\EcB0\EcD:mr=\EG4:nd=5\014:nw=5\037:\
:rs=100\Ee6\E~4\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\072\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7:\
:se=\EG0:sf=5\n:so=\EGt:sr=5\Ej:st=15\E1:ta=15\011:ts=\EF:\
:ue=\EG0:up=5\013:us=\EG8:ve=\E`1:vi=\E`0:vs=\E`5:
ncr260wy60wpp|NCR 2900_260 wyse 60 wide mode:\
:co#132:\
:cm=30\Ea%i%dR%dC:\
:is=100\Ee6\E~4\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7:\
:rs=100\Ee6\E~4\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7:\
:tc=ncr260wy60pp:
ncr160vppp|NCR 2900_160 viewpoint:\
:tc=ncr260vppp:
ncr160vpwpp|NCR 2900_160 viewpoint wide mode:\
:tc=ncr260vpwpp:
ncr160vt100an|NCR 2900_160 vt100 with ansi kybd:\
:tc=ncr260vt100an:
ncr160vt100pp|NCR 2900_160 vt100 with PC+ kybd:\
:tc=ncr260vt100pp:
ncr160vt100wan|NCR 2900_160 vt100 wide mode ansi kybd:\
:tc=ncr260vt100wan:
ncr160vt100wpp|NCR 2900_160 vt100 wide mode pc+ kybd:\
:tc=ncr260vt100wpp:
ncr160vt200an|NCR 2900_160 vt200 with ansi kybd:\
:tc=ncr260vt200an:
ncr160vt200pp|NCR 2900_160 vt200 with pc+ kybd:\
:tc=ncr260vt200pp:
ncr160vt200wan|NCR 2900_160 vt200 wide mode ansi kybd:\
:tc=ncr260vt200wan:
ncr160vt200wpp|NCR 2900_160 vt200 wide mode pc+ kybd:\
:tc=ncr260vt200wpp:
ncr160vt300an|NCR 2900_160 vt300 with ansi kybd:\
:tc=ncr260vt300an:
ncr160vt300pp|NCR 2900_160 vt300 with pc+ kybd:\
:tc=ncr260vt300pp:
ncr160vt300wan|NCR 2900_160 vt300 wide mode ansi kybd:\
:tc=ncr260vt300wan:
ncr160vt300wpp|NCR 2900_160 vt300 wide mode pc+ kybd:\
:tc=ncr260vt300wpp:
ncr160wy50+pp|NCR 2900_160 wyse 50+:\
:tc=ncr260wy50+pp:
ncr160wy50+wpp|NCR 2900_160 wyse 50+ wide mode:\
:tc=ncr260wy50+wpp:
ncr160wy60pp|NCR 2900_160 wyse 60:\
:tc=ncr260wy60pp:
ncr160wy60wpp|NCR 2900_160 wyse 60 wide mode:\
:tc=ncr260wy60wpp:
ncrvt100an|ncrvt100pp|NCR vt100 for the 2900 terminal:\
:5i:am:hs:mi:ms:xo:\
:Nl#32:co#80:it#8:li#24:\
:#4=\E[D:%i=\E[C:@8=^M:AL=80\E[%dL:DC=40\E[%dP:\
:DL=70\E[%dM:DO=30\E[%dB:K1=\E[H:LE=30\E[%dD:RI=30\E[%dC:\
:UP=30\E[%dA:\
:ac=``aaffgghhiijjkkllmmnnqqttuuvvwwxxyyzz~~:\
:ae=90\017:al=80\E[B\E[L:as=90\016:bl=^G:cb=30\E[1K:\
:cd=300\E[0J:ce=30\E[0K:cl=300\E[2J\E[1;1H:\
:cm=100\E[%i%d;%dH:cr=^M:cs=100\E[%i%d;%dr:ct=40\E[3g:\
:dc=10\E[1P:dl=40\E[M:do=2\E[B:ds=25\E[31l:eA=40\E(B\E)0:\
:ei=80\E[4l:fs=101:ho=80\E[H:im=80\E[4h:\
:is=200\E[12h\E[?10l\E%/0n\E[P\031\E[?3l\E(B\E)0:\
:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:kb=^H:kd=\E[B:kl=\E[D:\
:kr=\E[C:ku=\E[A:le=2\E[D:mb=30\E[5m:md=30\E[1m:\
:me=120\017\E[0m:mr=30\E[7m:nd=2\E[C:nw=\EE:ps=100\E[i:\
:rc=\E8:\
:rs=200\Ec\E[12;31h\E[?3;4;5;10l\E[?6;7;19;25h\E[33;34l\E[0m\E(B\E)0\E%/0n\E[P\031:\
:sc=\E7:se=30\E[0m:sf=\ED:so=30\E[7m:sr=50\EM:st=\EH:ta=^I:\
:ts=70\E[>+1:ue=30\E[0m:up=2\E[A:us=30\E[4m:
ncrvt100wan|NCRVT100WPP|ncrvt100wpp|NCR VT100 emulation of the 2900 terminal:\
:co#132:\
:is=200\E[12h\E[?10l\E%/0n\E[P\031\E[?3h\E(B\E)0:\
:rs=200\Ec\E[12;31h\E[?4;5;10l\E?3;6;7;19;25h\E[33;34l\E[0m\E(B\E)0\E%/0n\E[P\031:\
:tc=ncrvt100an:
#
# Vendor-supplied NCR termcaps end here
# NCR7900 DIP switches:
#
# Switch A:
# 1-4 - Baud Rate
# 5 - Parity (Odd/Even)
# 6 - Don't Send or Do Send Spaces
# 7 - Parity Enable
# 8 - Stop Bits (One/Two)
#
# Switch B:
# 1 - Upper/Lower Shift
# 2 - Typewriter Shift
# 3 - Half Duplex / Full Duplex
# 4 - Light/Dark Background
# 5-6 - Carriage Return Without / With Line Feed
# 7 - Extended Mode
# 8 - Suppress Keyboard Display
#
# Switch C:
# 1 - End of line entry disabled/enabled
# 2 - Conversational mode / (Local?) Mode
# 3 - Control characters displayed / not displayed
# 4 - (2-wire?) / 4-wire communications
# 5 - RTS on and off for each character
# 6 - (50Hz?) / 60 Hz
# 7 - Exit after level zero diagnostics
# 8 - RS-232 interface
#
# Switch D:
# 1 - Reverse Channel (yes / no)
# 2 - Manual answer (no / yes)
# 3-4 - Cursor appearance
# 5 - Communication Rate
# 6 - Enable / Disable EXT turnoff
# 7 - Enable / Disable CR turnoff
# 8 - Enable / Disable backspace
#
# Since each attribute parameter is 0 or 1, we shift each attribute (standout,
# reverse, blink, dim, and underline) the appropriate number of bits (by
# multiplying the 0 or 1 by a correct factor to shift) so the bias character,
# '@' is (effectively) "or"ed with each attribute to generate the proper third
# character in the <ESC>0 sequence. The :sa: string implements the following
# equation:
#
# ((((('@' + P5) | (P4 << 1)) | (P3 << 3)) | (P2 << 4)) | (p1 * 17)) =>
# ((((('@' + P5) + (P4 << 1)) + (P3 << 3)) + (P2 << 4)) + (p1 * 17))
#
# Where: P1 <==> Standout attribute parameter
# P2 <==> Underline attribute parameter
# P3 <==> Reverse attribute parameter
# P4 <==> Blink attribute parameter
# P5 <==> Dim attribute parameter
# From <root@goliath.un.atlantaga.NCR.COM>, init string hacked by SCO.
ncr7900i|ncr7900|ncr 7900 model 1:\
:am:bw:ul:\
:co#80:li#24:sg#1:ug#1:\
:bl=^G:cd=\Ek:ce=\EK:cl=^L:cm=\E1%r%.%.:cr=^M:do=^J:\
:is=\E0@\010\E3\E4\E7:kd=^J:kh=^A:kl=^U:kr=^F:ku=^Z:le=^H:\
:ll=^A:mb=\E0B:me=\E0@:mh=\E0A:mr=\E0P:nd=^F:pf=^T:po=^R:\
:se=\E0@:sf=^J:so=\E0Q:ue=\E0@:up=^Z:us=\E0`:
ncr7900iv|ncr 7900 model 4:\
:am:bw:es:hs:\
:co#80:li#24:\
:al=\E^N:bl=^G:cl=^L:cm=\013%+@\E\005%2:cr=^M:dl=\E^O:\
:do=^J:ds=\Ey1:fs=\Ek\Ey5:ho=\013@\E^E00:k1=\ES:k2=\ET:\
:k3=\EU:k4=\EV:k5=\EW:k6=\EP:k7=\EQ:k8=\ER:kb=^H:kd=\EB:\
:kh=\EH:kl=\ED:kr=\EC:ku=\EA:l6=blue:l7=red:l8=white:le=^H:\
:nw=^M^J:sf=^J:ts=\Ej\Ex5\Ex1\EY8%+ \Eo:
# Warning: This terminal will lock out the keyboard when it receives a CTRL-D.
# The user can enter a CTRL-B to get out of this locked state.
# In <hpa>, we want to output the character given by the formula:
# ((col / 10) * 16) + (col % 10) where "col" is "p1"
ncr7901|ncr 7901 model:\
:am:bw:ul:\
:co#80:li#24:\
:bl=^G:cd=\Ek:ce=\EK:ch=\020%B%.:cl=^L:cm=\EY%+ %+ :cr=^M:\
:cv=\013%+@:do=^J:is=\E4^O:kC=^L:kd=^J:kh=^H:kl=^U:kr=^F:\
:ku=^Z:le=^H:ll=^A:mb=\E0B:me=^O:mh=\E0A:mr=\E0P:nd=^F:pf=^T:\
:po=^R:se=^O:sf=^J:so=\E0Q\016:ue=^O:up=^Z:us=\E0`\016:\
:ve=^X:vi=^W:
# Newbury Data Recording Limited (Newbury Data)
#
# Have been manufacturing and reselling various peripherals for a long time
# They don't make terminals anymore, but are still in business (in 2007).
# Their e-mail address is at ndsales@newburydata.co.uk
# and their post address is:
#
# Newbury Data Recording Ltd,
# Premier Park, Road One,
# Winsford, Cheshire, CW7 3PT
#
# Their technical support is still good, they sent me for free a printed copy
# of the 9500 user manual and I got it just 1 week after I first contacted them
# (in 2005)!
# NDR 9500
# Manufactured in the early/mid eighties, behaves almost the same as a
# Televideo 950. Take a 950, change its cabinet for a more 80s-ish one (but
# keep the same keyboard layout), add an optional 25-line mode, replace the DIP
# switches with a menu and remove the "lock line" feature (ESC ! 1 and ESC !
# 2), here is the NDR 9500. Even the line-lock, albeit disabled, is
# recognized: if you type in "ESC !", the next (third) character is not
# echoed, showing that the terminal was actually waiting for a parameter!
ndr9500|nd9500|Newbury Data 9500:\
:5i:am:bw:hs:mi:ms:ul:xo:\
:co#80:li#24:ws#79:\
:#3=\Eq:%9=\EP:*4=\Er:*5=\EO:*8=\Et:@8=^M:F1=^AJ\r:F2=^A`\r:\
:F3=^Aa\r:F4=^Ab\r:F5=^Ac\r:F6=^Ad\r:F7=^Ae\r:F8=^Af\r:\
:F9=^Ag\r:FA=^Ah\r:FB=^Ai\r:FC=^Aj\r:RX=^N:SX=^O:\
:ac=jDkClBmAnIqKtMuLvOwNxJ:ae=\E%%:al=\EE:as=\E$:bl=^G:\
:bt=\EI:cd=\EY:ce=\ET:cl=\E;:cm=\E=%+ %+ :cr=^M:ct=\E3:\
:dc=\EW:dl=\ER:do=^V:ds=\Eh:ei=\Er:fs=^M:ho=^^:ic=\EQ:im=\Eq:\
:is=\Ew\E'\EDF\El\Er\EO:k1=^A@\r:k2=^AA\r:k3=^AB\r:\
:k4=^AC\r:k5=^AD\r:k6=^AE\r:k7=^AF\r:k8=^AG\r:k9=^AH\r:\
:k;=^AI\r:kA=\EE:kB=\EI:kC=^Z:kD=\EW:kE=\ET:kI=\EQ:kL=\ER:\
:kS=\EY:kd=^V:kh=^^:kl=^H:kr=^L:ku=^K:le=^H:me=\EG0\E%%\E(:\
:mh=\E):mp=\E):nd=^L:nw=^_:pf=\Ea:pl=\E|%+02%r\031:po=\E`:\
:px=\E|%+01%r\031:se=\E(:sf=^J:so=\E):sr=\Ej:st=\E1:ta=^I:\
:ts=\Eg\Ef\011%+ :up=^K:vb=\Eb\Ed:ve=\E.1:vi=\E.0:
ndr9500-nl|NDR 9500 with no status line:\
:hs@:\
:ws@:\
:ds@:fs@:ts@:tc=ndr9500:
ndr9500-25|NDR 9500 with 25th line enabled:\
:li#25:tc=ndr9500:
ndr9500-25-nl|NDR 9500 with 25 lines and no status line:\
:li#25:tc=ndr9500-nl:
ndr9500-mc|NDR 9500 with magic cookies (enables underline inverse video invisible and blink):\
:ms@:\
:sg#1:ug#1:\
:mb=\EG2:me=\EG0\E%%\E(:mk=\EG1:mr=\EG4:se=\EG0:so=\EG4:\
:ue=\EG0:us=\EG8:tc=ndr9500:
ndr9500-25-mc|NDR 500 with 25 lines and magic cookies:\
:li#25:tc=ndr9500-mc:
ndr9500-mc-nl|NDR 9500 with magic cookies and no status line:\
:hs@:\
:ws@:\
:ds@:fs@:ts@:tc=ndr9500-mc:
ndr9500-25-mc-nl|NDR 9500 with 25 lines and magic cookies and no status line:\
:li#25:tc=ndr9500-mc-nl:
#### Perkin-Elmer (Owl)
#
# These are official terminfo entries from within Perkin-Elmer.
#
bantam|pe550|pe6100|perkin elmer 550:\
:bs:\
:co#80:li#24:\
:bl=^G:ce=20\EI:cl=20\EK:cm=\EX%+ \EY%+ :cr=^M:do=^J:\
:ho=\EH:le=^H:ll=\EH\EA:nd=\EC:sf=^J:up=\EA:
fox|pe1100|perkin elmer 1100:\
:am:bs:\
:co#80:li#24:\
:bl=^G:cd=5.5*\EJ:ce=\EI:cl=132\EH\EJ:cm=\EX%+ \EY%+ :\
:cr=^M:ct=\E3:do=^J:ho=\EH:le=^H:ll=\EH\EA:nd=\EC:sf=^J:\
:st=\E1:up=\EA:vb=\020\002\020\003:
owl|pe1200|perkin elmer 1200:\
:am:bs:in:\
:co#80:li#24:\
:al=5.5*\EL:bl=^G:cd=5.5*\EJ:ce=5.5\EI:cl=132\EH\EJ:\
:cm=\EX%+ \EY%+ :cr=^M:ct=\E3:dc=5.5*\EO:dl=5.5*\EM:do=^J:\
:ei=:ho=\EH:ic=\EN:im=:ip=5.5*:k0=\ERJ:k1=\ERA:k2=\ERB:\
:k3=\ERC:k4=\ERD:k5=\ERE:k6=\ERF:k7=\ERG:k8=\ERH:k9=\ERI:\
:kb=^H:le=^H:ll=\EH\EA:me=\E!\200:nd=\EC:se=\E!\200:sf=^J:\
:so=\E!^H:st=\E1:up=\EA:vb=\020\002\020\003:
pe1251|pe6300|pe6312|perkin elmer 1251:\
:am:\
:co#80:it#8:li#24:pb#300:sg#1:vt#8:\
:bl=^G:cd=20*\EJ:ce=10*\EI:cl=332\EK:cm=\EX%+ \EY%+ :\
:cr=^M:ct=\E3:do=\EB:ho=\EH:k0=\ERA:k1=\ERB:k2=\ERC:k3=\ERD:\
:k4=\ERE:k5=\ERF:k6=\ERG:k7=\ERH:k8=\ERI:k9=\ERJ:k;=\ERK:\
:le=\ED:nd=\EC:sf=^J:st=\E1:up=\EA:
# (pe7000m: this had
# rmul=\E!\0, smul=\E!\040,
# which is probably wrong, it collides with kf0
pe7000m|perkin elmer 7000 series monochrome monitor:\
:am:\
:co#80:li#24:\
:bl=^G:bt=\E!Y:cd=\EJ:ce=\EI:cl=\EK:cm=\ES%+ %+ :cr=^M:\
:do=\EB:ho=\EH:i1=\E!\200\EW 7o\Egf\ES7\040:k0=\E!\200:\
:k1=\E!^A:k2=\E!^B:k3=\E!^C:k4=\E!^D:k5=\E!^E:k6=\E!^F:\
:k7=\E!^G:k8=\E!^H:k9=\E!^I:k;=\E!^J:kb=^H:kd=\E!U:kh=\E!S:\
:kl=\E!V:kr=\E!W:ku=\E!T:le=\ED:ll=\ES7\040:nd=\EC:sf=^J:\
:sr=\ER:up=\EA:
pe7000c|perkin elmer 7000 series colour monitor:\
:i1=\E!\200\EW 7o\Egf\Eb0\Ec7\ES7\040:se=\Eb0:so=\Eb2:\
:ue=\E!\200:us=\E!\040:tc=pe7000m:
#### Sperry Univac
#
# Sperry Univac has merged with Burroughs to form Unisys.
#
# This entry is for the Sperry UTS30 terminal running the TTY
# utility under control of CP/M Plus 1R1. The functionality
# provided is comparable to the DEC vt100.
# (uts30: I added <rmam>/<smam> based on the init string -- esr)
uts30|sperry uts30 with cp/m@1R1:\
:am:bw:hs:\
:co#80:li#24:ws#40:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
:LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7m:SF=\E[%dB:\
:SR=\E[%dA:UP=\E[%dA:\
:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
:ae=\Ed:al=\EN:as=\EF:bl=^G:cd=\E[J:ce=\E[K:cl=^L:\
:cm=\E[%i%d;%dH:cr=^M:cs=\EU%+ %+ :dc=\EM:dl=\EL:do=\E[B:\
:ei=:fs=^M:ho=\E[H:ic=\EO:im=:is=\E[U 7\E[24;1H:kb=^H:\
:kd=\EOB:kh=\E[H:kl=\EOD:kr=\EOC:ku=\EOA:le=^H:mb=\E[5m:\
:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:rc=\EX:\
:rf=/usr/share/tabset/vt100:\
:rs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:sc=\EW:se=\E[m:\
:sf=^J:so=\E[7m:sr=\EI:ta=^I:ts=\E]:uc=\EPB:ue=\E[m:up=\E[A:\
:us=\E[4m:ve=\ES:vi=\ER:
#### Tandem
#
# Tandem builds these things for use with its line of fault-tolerant
# transaction-processing computers. They aren't generally available
# on the merchant market, and so are fairly uncommon.
#
tandem6510|adm3a repackaged by Tandem:\
:tc=adm3a:
# A funny series of terminal that TANDEM uses. The actual model numbers
# have a fourth digit after 653 that designates minor variants. These are
# natively block-mode and rather ugly, but they have a character mode which
# this doubtless(?) exploits. There is a 6520 that is slightly dumber.
# (tandem653: had ":sb=\ES:", probably someone's mistake for sf; also,
# removed :if=/usr/share/tabset/tandem653:, no such file -- esr)
tandem653|t653x|Tandem 653x multipage terminal:\
:am:bs:da:db:hs:\
:co#80:li#24:sg#1:ug#1:ws#64:\
:cd=\EJ:ce=\EK:cl=\EI:cm=\023%+ %+ :do=^J:ds=\Eo\r:fs=^M:\
:ho=\EH:le=^H:me=\E6\040:nd=\EC:se=\E6\040:sf=\ES:so=\E6$:\
:sr=\ET:ts=\Eo:ue=\E6\040:up=\EA:us=\E60:
#### Tandy/Radio Shack
#
# Tandy has a line of VDTs distinct from its microcomputers.
#
dmterm|deskmate terminal:\
:am:bw:\
:co#80:li#24:\
:al=\EP:bl=^G:cd=\EJ:ce=\EK:cl=\Ej:cm=\EY%+ %+ :cr=^M:\
:dc=\ES:dl=\ER:do=\EB:ei=:ho=\EH:ic=\EQ:im=:k0=\E1:k1=\E2:\
:k2=\E3:k3=\E4:k4=\E5:k5=\E6:k6=\E7:k7=\E8:k8=\E9:k9=\E0:\
:kd=\EB:kh=\EH:kl=\ED:kr=\EC:ku=\EA:l0=f1:l1=f2:l2=f3:l3=f4:\
:l4=f5:l5=f6:l6=f7:l7=f8:l8=f9:l9=f10:le=^H:ll=\EE:mk@:nd=\EC:\
:sf=\EX:ta=^I:ue@:up=\EA:us@:ve=\EG6:vi=\EG5:tc=adm+sgr:
dt100|dt-100|Tandy DT-100 terminal:\
:xo:\
:co#80:li#24:sg#1:ug#1:\
:ac=jjkkllmmnnqqttuuvvwwxx:ae=^O:al=\E[L:as=^N:bl=^G:\
:cd=\E[J:ce=\E[K:cl=\E[H\E[2J:cm=\010\E[%i%d;%dH:cr=^M:\
:cs=\E[%2;%2r:dc=\E[P:dl=\E[M:do=\E[B:ei=:ho=\E[H:ic=\E[@:\
:im=:is=\E[?3l\E)0\E(B:k1=\E[?3i:k2=\E[2i:k3=\E[@:k4=\E[M:\
:k5=\E[17~:k6=\E[18~:k7=\E[19~:k8=\E[20~:k9=\E[21~:\
:k;=\E[?5i:kN=\E[29~:kP=\E[28~:kd=\E[B:kh=\E[H:kl=\E[D:\
:kr=\E[C:ku=\E[A:l1=f1:l2=f2:l3=f3:l4=f4:l5=f5:l6=f6:l7=f7:\
:l8=f8:le=^H:me=\E[m:nd=\E[C:se=\E[m:sf=^J:so=\E[7m:sr=\EM:\
:ta=^I:ue=\E[m:up=\E[A:us=\E[4m:ve=\E[?25h:vi=\E[?25l:
dt100w|dt-100w|Tandy DT-100 terminal (wide mode):\
:co#132:tc=dt100:
dt110|Tandy DT-110 emulating ansi:\
:xo:\
:co#80:li#24:\
:@7=\E[K:ac=jjkkllmmnnqqttuuvvwwxx:ae=^O:al=\E[0L:as=^N:\
:bl=^G:cd=\E[0J:ce=\E[0K:cl=\E[H\E[2J:cm=\010\E[%i%d;%dH:\
:cr=^M:cs=\E[%i%d;%dr:dc=\E[0P:dl=\E[0M:do=\E[B:\
:eA=\E(B\E)0:ei=:ho=\E[H:ic=\E[0@:im=:is=\E[?3l\E)0\E(B:\
:k1=\E[1~:k2=\E[2~:k3=\E[3~:k4=\E[4~:k5=\E[5~:k6=\E[6~:\
:k7=\E[7~:k8=\E[8~:k9=\E[9~:k;=\E[10~:kI=\E[@:kN=\E[26~:\
:kP=\E[25~:kd=\E[B:kh=\E[G:kl=\E[D:kr=\E[C:ku=\E[A:l0=f1:\
:l1=f2:l2=f3:l3=f4:l4=f5:l5=f6:l6=f7:l7=f8:l8=f9:l9=f10:le=^H:\
:me=\E[m:nd=\E[C:se=\E[m:sf=^J:so=\E[7m:sr=\EM:ta=^I:\
:ue=\E[m:up=\E[A:us=\E[4m:ve=\E[?25h:vi=\E[?25l:
pt210|TRS-80 PT-210 printing terminal:\
:hc:os:\
:co#80:\
:bl=^G:cr=^M:do=^J:sf=^J:
#### Tektronix (tek)
#
# Tektronix tubes are graphics terminals. Most of them use modified
# oscilloscope technology incorporating a long-persistence green phosphor,
# and support vector graphics on a main screen with an attached "dialogue
# area" for interactive text.
#
tek|tek4012|tektronix 4012:\
:bs:os:\
:co#75:li#35:\
:bl=^G:cl=1000\E\014:cr=^M:do=^J:ff=1000\014:is=\E^O:le=^H:
# (tek4013: added <acsc> to suppress tic warnings re :as:/:ae: --esr)
tek4013|tektronix 4013:\
:ac=:ae=\E^O:as=\E^N:tc=tek4012:
tek4014|tektronix 4014:\
:co#81:li#38:\
:is=\E\017\E9:tc=tek4012:
# (tek4015: added <acsc> to suppress tic warnings re :as:/:ae: --esr)
tek4015|tektronix 4015:\
:ac=:ae=\E^O:as=\E^N:tc=tek4014:
tek4014-sm|tektronix 4014 in small font:\
:co#121:li#58:\
:is=\E\017\E\072:tc=tek4014:
# (tek4015-sm: added <acsc> to suppress tic warnings re :as:/:ae: --esr)
tek4015-sm|tektronix 4015 in small font:\
:ac=:ae=\E^O:as=\E^N:tc=tek4014-sm:
# Tektronix 4023 from Andrew Klossner <orca!andrew.tektronix@csnet-relay>
#
# You need to have "stty nl2" in effect. Some versions of tset(1) know
# how to set it for you.
#
# It's got the Magic Cookie problem around stand-out mode. If you can't
# live with Magic Cookie, remove the :so: and :se: fields and do without
# reverse video. If you like reverse video stand-out mode but don't want
# it to flash, change the letter 'H' to 'P' in the :so: field.
tek4023|tektronix 4023:\
:am:bs:\
:co#80:dN#4:li#24:sg#1:vt#4:\
:bl=^G:cl=4\E\014:cm=\034%r%+ %+ :cr=^M:do=^J:kb=^H:le=^H:\
:nd=^I:nl=^J:se=^_@:so=^_P:
# It is recommended that you run the 4025 at 4800 baud or less;
# various bugs in the terminal appear at 9600. It wedges at the
# bottom of memory (try "cat /usr/dict/words"); ^S and ^Q typed
# on keyboard don't work. You have to hit BREAK twice to get
# one break at any speed - this is a documented feature.
# Can't use cursor motion because it's memory relative, and
# because it only works in the workspace, not the monitor.
# Same for home. Likewise, standout only works in the workspace.
#
# :ce: was commented out since vi and rogue seem to work better
# simulating it with lots of spaces!
#
# :al: and :AL: had 145ms of padding, but that slowed down vi's ^U
# and didn't seem necessary.
#
tek4024|tek4025|tek4027|tektronix 4024/4025/4027:\
:am:bs:da:db:\
:co#80:it#8:li#34:lm#0:\
:AL=\037up\r\037ili %d\r:CC=^_:DL=\037dli %d\r\006:\
:DO=\037dow %d\r:LE=\037lef %d\r:RI=\037rig %d\r:\
:UP=\037up %d\r:al=\037up\r\037ili\r:bl=^G:\
:cd=\037dli 50\r:cl=\037era\r\n\n:cr=^M:dc=\037dch\r:\
:dl=\037dli\r\006:do=^F^J:ei=:ic=\037ich\r \010:im=:\
:is=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r:\
:ke=\037lea p2\r\037lea p4\r\037lea p6\r\037lea p8\r\037lea f5\r:\
:ks=\037lea p4 /h/\r\037lea p8 /k/\r\037lea p6 / /\r\037lea p2 /j/\r\037lea f5 /H/\r:\
:le=^H:nd=\037rig\r:sf=^F^J:ta=^I:up=^K:
tek4025-17|tek 4025 17 line window:\
:li#17:tc=tek4025:
tek4025-17-ws|tek 4025 17 line window in workspace:\
:is=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r\037wor 17\r\037mon 17\r:\
:se=\037att s\r:so=\037att e\r:te=\037mon h\r:\
:ti=\037wor h\r:tc=tek4025-17:
tek4025-ex|tek4027-ex|tek 4025/4027 w/!:\
:is=\037com 33\r\n!sto 9 17 25 33 41 49 57 65 73\r:\
:te=\037com 33\r:ti=!com 31\r:tc=tek4025:
# Tektronix 4025a
# From: Doug Gwyn <gwyn@brl-smoke.ARPA>
# The following status modes are assumed for normal operation (replace the
# initial "!" by whatever the current command character is):
# !COM 29 # NOTE: changes command character to GS (^])
# ^]DUP
# ^]ECH R
# ^]EOL
# ^]RSS T
# ^]SNO N
# ^]STO 9 17 25 33 41 49 57 65 73
# Other modes may be set according to communication requirements.
# If the command character is inadvertently changed, termcap can't restore it.
# Insert-character cannot be made to work on both top and bottom rows.
# Clear-to-end-of-display emulation via !DLI 988 is too grotty to use, alas.
# There also seems to be a problem with vertical motion, perhaps involving
# delete/insert-line, following a typed carriage return. This terminal sucks.
# Delays not specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
# (tek4025a: removed obsolete ":xx:". This may mean the tek4025a entry won't
# work any more. -- esr)
tek4025a|Tektronix 4025A:\
:am:bs:bw:da:db:pt:xo:\
:co#80:it#8:li#34:\
:CC=^]:DC=\035dch %d;:DL=\035dli %d;:DO=\035dow %d;:\
:LE=\035lef %d;:RI=\035rig %d;:SF=\035dow %d;:\
:UP=\035up %d;:al=\013\035ili;:bl=^G:bt=\035bac;:\
:ce=\035dch 80;:ch=\r\035rig %d;:cl=\035era;\n\035rup;:\
:cr=^M:ct=\035sto;:dc=\035dch;:dl=\035dli;:do=^J:le=^H:\
:nd=\035rig;:\
:rs=!com 29\035del 0\035rss t\035buf\035buf n\035cle\035dis\035dup\035ech r\035eol\035era g\035for n\035pad 203\035pad 209\035sno n\035sto 9 17 25 33 41 49 57 65 73\035wor 0;:\
:sf=^J:ta=^I:up=^K:
# From: cbosg!teklabs!davem Wed Sep 16 21:11:41 1981
# Here's the command file that I use to get rogue to work on the 4025.
# It should work with any program using the old curses (e.g. it better
# not try to scroll, or cursor addressing won't work. Also, you can't
# see the cursor.)
# (This "learns" the arrow keys for rogue. I have adapted it for termcap - mrh)
tek4025-cr|tek 4025 for curses and rogue:\
:am:bs:\
:co#80:it#8:li#33:\
:cl=\037era;:cm=\037jum%i%d,%d;:do=^F^J:\
:is=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r:\
:le=^H:nd=\037rig;:sf=^F^J:ta=^I:te=\037wor 0:\
:ti=\037wor 33h:up=^K:
# next two lines commented out since curses only allows 128 chars, sigh.
# :ti=\037lea p1/b/\037lea p2/j/\037lea p3/n/\037lea p4/h/\037lea p5/ /\037lea p6/l/\037lea p7/y/\037lea p8/k/\037lea p9/u/\037lea p./f/\037lea pt/`era w/13\037lea p0/s/\037wor 33h:\
# :te=\037lea p1\037lea p2\037lea p3\037lea p4\037lea pt\037lea p5\037lea p6\037lea p7\037lea p8\037lea p9/la/13\037lea p.\037lea p0\037wor 0:
tek4025ex|4025ex|4027ex|tek 4025 w/!:\
:is=\037com 33\r\n!sto 9,17,25,33,41,49,57,65,73\r:\
:te=\037com 33\r:ti=!com 31\r:tc=tek4025:
tek4105|tektronix 4105:\
:am:bs:mi:ms:ul:xn:xt:\
:co#79:it#8:li#29:\
:ac=:ae=\E[m:al=\E[1L:as=\E[1m:bl=^G:bt=\E[Z:cd=\E[J:\
:ce=\E[K:cl=\E[2J\E[H:cm=\E[%i%2;%2H:cr=^M:ct=\E[1g:\
:dc=\E[1P:dl=\E[1M:do=\E[1B:ei=\E[4l:ho=\E[H:i1=\E%!1\E[m:\
:im=\E[4h:is=\E%!1\E[?6141\E[m:kb=^H:kd=\E[1B:kl=\E[1D:\
:kr=\E[1C:ku=\E[1A:le=\E[1D:mb=\E[=3;<7m:md=\E[=7;<4m:\
:me=\E[=0;<1m:mh=\E[=1;<6m:mk=\E[=6;<5:mr=\E[=1;<3m:\
:nd=\E[1C:se=\E[=0;<1m:sf=\E[S:so=\E[=2;<3m:sr=\E[T:ta=^I:\
:te=:ti=\E%!1\E[?6l\E[2J:ue=\E[=0;<1m:up=\E[1A:\
:us=\E[=5;<2m:
# (tek4105-30: I added <rmam>/<smam> based on the init string -- esr)
tek4105-30|4015 emulating 30 line vt100:\
:am:mi:ms:xn:xo:\
:co#80:it#8:li#30:vt#3:\
:DO=\E[%dB:LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:\
:UP=\E[%dA:\
:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
:ae=^O:as=^N:bl=^G:cb=3\E[1K:cd=50\E[J:ce=3\E[K:\
:cl=50\E[H\E[J:cm=5\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
:ct=\E[3g:do=^J:eA=\E(B\E)0:ho=\E[H:kb=^H:kd=\EOB:\
:ke=\E[?1l\E>:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:\
:mb=2\E[5m:md=2\E[1m:me=2\E[0m:mr=2\E[7m:nd=2\E[C:rc=\E8:\
:rs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:sc=\E7:se=2\E[m:\
:sf=^J:so=2\E[1;7m:sr=5\EM:st=\EH:ta=^I:ue=2\E[m:up=2\E[A:\
:us=2\E[4m:tc=vt100+fnkeys:
# Tektronix 4105 from BRL
# The following setup modes are assumed for normal operation:
# CODE ansi CRLF no DABUFFER 141
# DAENABLE yes DALINES 30 DAMODE replace
# DAVISIBILITY yes ECHO no EDITMARGINS 1 30
# FLAGGING input INSERTREPLACE replace LFCR no
# ORIGINMODE relative PROMPTMODE no SELECTCHARSET G0 B
# SELECTCHARSET G1 0 TABS -2
# Other setup modes may be set for operator convenience or communication
# requirements; I recommend
# ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
# BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
# EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
# GAMODE overstrike GCURSOR 0 100 0 GSPEED 10 1
# IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
# PROMPTSTRING '' QUEUESIZE 2460 WINDOW 0 0 4095 3132
# XMTDELAY 0
# and factory color maps. After setting these modes, save them with NVSAVE. No
# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
# "IC" cannot be used in combination with "im" & "ei".
# "tek4105a" is just a guess:
tek4105a|Tektronix 4105:\
:bs:ms:pt:xo:\
:co#80:it#8:kn#8:li#30:vt#3:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:\
:RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:ac=:ae=^O:al=\E[L:\
:as=^N:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\
:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:\
:dl=\E[M:do=^J:ec=\E[%dX:ei=\E[4l:ho=\E[H:im=\E[4h:\
:is=\E%!1:k0=\EOA:k1=\EOB:k2=\EOC:k3=\EOD:k4=\EOP:k5=\EOQ:\
:k6=\EOR:k7=\EOS:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:\
:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:l0=F1:l1=F2:l2=F3:l3=F4:l4=F5:\
:l5=F6:l6=F8:le=^H:ll=\E[30;H:mb=\E[5m:md=\E[1m:me=\E[m:\
:mr=\E[7m:nd=\E[C:nw=\EE:rc=\E8:\
:rs=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40\ELI100\ELLA>\ELM0\EKE0\ENF1\EKS0\END0\E%!1\Ec\E[?3;5l\E[?7;8h\E[r\E[m\E>:\
:sc=\E7:se=\E[m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
:te=\E%!0\ELBH=\E%!1:ti=\E[?6l:ue=\E[m:up=\EM:us=\E[4m:\
:ve=\E%!0\ETD10\E%!1:vi=\E%!0\ETD00\E%!1:\
:vs=\E%!0\ETD70\E%!1:
#
# Tektronix 4106/4107/4109 from BRL
# The following setup modes are assumed for normal operation:
# CODE ansi COLUMNMODE 80 CRLF no
# DABUFFER 141 DAENABLE yes DALINES 32
# DAMODE replace DAVISIBILITY yes ECHO no
# EDITMARGINS 1 32 FLAGGING input INSERTREPLACE replace
# LFCR no LOCKKEYBOARD no ORIGINMODE relative
# PROMPTMODE no SELECTCHARSET G0 B SELECTCHARSET G1 0
# TABS -2
# Other setup modes may be set for operator convenience or communication
# requirements; I recommend
# ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
# BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
# EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
# GAMODE overstrike GCURSOR 0 100 0 GSPEED 9 3
# IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
# PROMPTSTRING '' QUEUESIZE 2620 WINDOW 0 0 4095 3132
# XMTDELAY 0
# and factory color maps. After setting these modes, save them with NVSAVE. No
# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
# "IC" cannot be used in combination with "im" & "ei".
tek4106brl|tek4107brl|tek4109brl|Tektronix 4106 4107 or 4109:\
:ms:xo:\
:co#80:it#8:li#32:vt#3:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:\
:RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:ac=:ae=^O:al=\E[L:\
:as=^N:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\
:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:\
:dl=\E[M:do=^J:ec=\E[%dX:ei=\E[4l:ho=\E[H:im=\E[4h:\
:is=\E%!1:k0=\EOA:k1=\EOB:k2=\EOC:k3=\EOD:k4=\EOP:k5=\EOQ:\
:k6=\EOR:k7=\EOS:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:\
:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:l0=F1:l1=F2:l2=F3:l3=F4:l4=F5:\
:l5=F6:l6=F8:le=^H:ll=\E[32;H:mb=\E[5m:md=\E[1m:me=\E[m:\
:mr=\E[7m:nd=\E[C:nw=\EE:\
:r1=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40\ELI100\ELLB0\ELM0\EKE0\ENF1\EKS0\END0\ERE0\E%!1\Ec\E[?3;5l\E[?7;8h\E[r\E[m\E>:\
:rc=\E8:sc=\E7:se=\E[m:sf=^J:so=\E[7;42m:sr=\EM:st=\EH:\
:ta=^I:te=\E%!0\ELBH=\E%!1:ti=\E[?6l:ue=\E[m:up=\EM:\
:us=\E[4m:ve=\E%!0\ETD10\E%!1:vi=\E%!0\ETD00\E%!1:\
:vs=\E%!0\ETD70\E%!1:
# Tektronix 4107/4109 interpret 4 modes using "\E%!" followed by a code:
# 0 selects Tek mode, i.e., \E%!0
# 1 selects ANSI mode
# 2 selects ANSI edit-mode
# 3 selects VT52 mode
#
# One odd thing about the description (which has been unchanged since the 90s)
# is that the cursor addressing is using VT52 mode, and a few others use the
# VT52's non-CSI versions of ANSI, e.g., \EJ.
tek4107|tek4109|tektronix terminals 4107 4109:\
:am:bs:mi:ms:ul:xn:xt:\
:co#79:it#8:li#29:\
:bl=^G:cd=\EJ:ce=\EK:cl=\ELZ:cm=\EY%+ %+ :cr=^M:do=^J:kb=^H:\
:kd=\EB:kl=\ED:kr=\EC:ku=\EA:le=^H:mb=\E%!1\E[5m\E%!0:\
:md=\E%!1\E[1m\E%!0:me=\E%!1\E[m\E%!0:\
:mh=\E%!1\E[<0m\E%!0:mr=\E%!1\E[7m\E%!0:nd=\EC:\
:se=\E%!1\E[m\E%!0:sf=^J:so=\E%!1\E[7;5m\E%!0:sr=\EI:\
:ta=^I:ue=\E%!1\E[m\E%!0:up=\EA:us=\E%!1\E[4m\E%!0:\
:ve=\E%!0:vs=\E%!3:
# Tektronix 4207 with sysline. In the ancestral termcap file this was 4107-s;
# see the note attached to tek4207.
tek4207-s|Tektronix 4207 with sysline but no memory:\
:es:hs:\
:ds=\E7\E[?6l\E[2K\E[?6h\E8:fs=\E[?6h\E8:\
:i1=\E%!1\E[2;32r\E[132D\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J:\
:is=\E7\E[?6l\E[2K\E[?6h\E8:\
:ts=\E7\E[?6l\E[2K\E[;%i%df:tc=tek4107:
# The 4110 series may be a wonderful graphics series, but they make the 4025
# look good for screen editing. In the dialog area, you can't move the cursor
# off the bottom line. Out of the dialog area, ^K moves it up, but there
# is no way to scroll.
#
# Note that there is a floppy for free from Tek that makes the
# 4112 emulate the vt52 (use the vt52 termcap). There is also
# an expected enhancement that will use ANSI standard sequences.
#
# 4112 in non-dialog area pretending to scroll. It really wraps
# but vi is said to work (more or less) in this mode.
#
# 'vi' works reasonably well with this entry.
#
otek4112|o4112-nd|otek4113|otek4114|old tektronix 4110 series:\
:am:\
:co#80:li#34:\
:bl=^G:cl=\E^L:cr=^M:do=^J:le=^H:sf=^J:te=\EKA1\ELV1:\
:ti=\EKA0\ELV0\EMG0:up=^K:
# The 4112 with the ANSI compatibility enhancement
tek4112|tek4114|tektronix 4110 series:\
:am:bs:db:\
:co#80:li#34:\
:al=\E[L:bt=\E[Z:cd=\E[0J:ce=\E[0K:cl=\E[2J\E[0;0H:\
:cm=\E[%i%d;%dH:dc=\E[P:dl=\E[M:do=\E[B:ei=:ic=\E[@:im=:\
:is=\E3!1:le=^H:me=\E[m:nd=\E[C:se=\E[m:\
:sf=\E7\E[0;0H\E[M\E8:so=\E[7m:sr=\E7\E[0;0H\E[L\E8:\
:ue=\E[m:up=\EM:us=\E[4m:
tek4112-nd|4112 not in dialog area:\
:ns:\
:up=^K:tc=tek4112:
tek4112-5|4112 in 5 line dialog area:\
:li#5:tc=tek4112:
# (tek4113: this used to have ":nd=\LM1\s\LM0:", someone's mistake;
# removed ":as=\E^N:, :ae=\E^O:", which had been commented out in 8.3.
# Note, the !0 and !1 sequences in :te:/:ti:/:ve:/:vi: were
# previously \0410 and \0411 sequences...I don't *think* they were supposed
# to be 4-digit octal -- esr)
tek4113|tektronix 4113 color graphics with 5 line dialog area:\
:am:bs:da:eo:\
:co#80:li#5:\
:cl=\ELZ:do=^J:is=\EKA1\ELL5\ELV0\ELV1:le=^H:\
:nd=\ELM1 \ELM0:uc=\010\ELM1_\ELM0:\
:vb=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0:
tek4113-34|tektronix 4113 color graphics with 34 line dialog area:\
:li#34:\
:is=\EKA1\ELLB2\ELV0\ELV1:tc=tek4113:
# :ns: left off to allow vi visual mode. APL font (:as=\E^N:/:ae=\E^O:) not
# supported here. :uc: is slow, but looks nice. Suggest setenv MORE -up .
# :vb: needs enough delay to let you see the background color being toggled.
tek4113-nd|tektronix 4113 color graphics with no dialog area:\
:am:bs:eo:\
:co#80:it#8:li#34:\
:cl=\E^L:do=^J:ho=\ELF7l\177 @:is=\ELZ\EKA0\ELF7l\177 @:\
:le=^H:ll=\ELF hl @:nd=^I:se=\EMT1:so=\EMT2:ta=^I:\
:uc=\010\EMG1_\EMG0:up=^K:\
:vb=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0:\
:vs=\ELZ\EKA0:
# This entry is from Tek. Inc. (Brian Biehl)
# (tek4115: :bc: renamed to :le:, <rmam>/<smam> added based on init string -- esr)
otek4115|Tektronix 4115:\
:am:bs:da:db:eo:\
:co#80:it#8:li#34:\
:RA=\E[?7l:SA=\E[?7h:al=\E[L:bt=\E[Z:cd=\E[J:ce=\E[K:\
:cl=\E[H\E[2J:cm=\E[%i%d;%dH:dc=\E[P:dl=\E[M:do=\E[B:\
:ei=\E[4l:ho=\E[H:if=/usr/share/tabset/vt100:im=\E[4h:\
:is=\E%!0\E%\014\ELV0\EKA1\ELBB2\ENU@=\ELLB2\ELM0\ELV1\EKYA?\E%!1\E[<1l\E[?7h\E[?8h\E[34;1H\E[34B\E[m:\
:kb=^H:ke=\E>:ks=\E=:le=\E[D:me=\E[m:nd=\E[C:se=\E[m:\
:so=\E[7m:sr=\EM:ta=^I:te=\E%!0\ELBG8\E%!1\E[34;1H\E[J:\
:ti=\E%!0\ELBB2\E%!1:ue=\E[m:up=\E[A:us=\E[4m:\
:ve=\E%!0\ELBG8\E%!1\E[34;1H:vs=\E%!0\ELBB2\E%!1:
tek4115|newer tektronix 4115 entry with more ANSI capabilities:\
:am:xo:\
:co#80:li#34:\
:AL=\E[%dL:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:LE=\E[%dD:\
:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:UP=\E[%dA:al=\E[L:bl=^G:\
:bt=\E[Z:cd=\E[J:ce=\E[K:ch=\E[%+^AG:cl=\E[H\E[J:\
:cm=\E[%i%d;%dH:cr=^M:ct=\E[3g:cv=\E[%+^Ad:dc=\E[P:\
:dl=\E[M:do=^J:ei=:ho=\E[H:ic=\E[@:im=:kb=^H:kd=\E[B:kh=\E[H:\
:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[m:\
:mk=\E[8m:mr=\E[7m:nd=\E[C:se=\E[m:sf=^J:so=\E[7m:st=\EH:\
:ta=^I:ue=\E[m:up=\E[A:us=\E[4m:
# The tek4125 emulates a vt100 incorrectly - the scrolling region
# command is ignored. The following entry replaces :cs: with the needed
# :AL:, :AL:, and :im:; removes some cursor pad commands that the tek4125
# chokes on; and adds a lot of initialization for the tek dialog area.
# Note that this entry uses all 34 lines and sets the cursor color to green.
# Steve Jacobson 8/85
# (tek4125: there were two "\!"s in the is that I replaced with "\E!";
# commented out, :im:=\E1 because there's no :ei: -- esr)
tek4125|tektronix 4125:\
:li#34:\
:al=\E[1L:cs@:dl=\E[1M:\
:is=\E%\E!0\EQD1\EUX03\EKA\ELBB2\ELCE0\ELI100\ELJ2\ELLB2\ELM0\ELS1\ELX00\ELV1\E%\E!1\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:\
:ks=\E=:rc@:sc@:tc=vt100:
# From: <jcoker@ucbic>
# (tek4207: This was the termcap file's entry for the 4107/4207, but SCO
# supplied another, less capable 4107 entry. So we'll use that for 4107 and
# note that if jcoker wasn't confused you may be able to use this one.
# I merged in :ms:,:sf:,:sr:,<invis>,:ct: from a BRL entry -- esr)
tek4207|Tektronix 4207 graphics terminal with memory:\
:am:bw:mi:ms:ul:xn:\
:co#80:it#8:li#32:\
:al=3\E[L:bt=\E[Z:cd=\E[J:ce=5\E[K:cl=156\E[H\E[J:\
:cm=\E[%i%d;%dH:ct=\E[1g:dc=4\E[P:dl=3\E[M:do=^J:ei=:\
:ho=\E[H:ic=4\E[@:im=:\
:is=\E%!0\ELBP0\E%!1\E[H\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J:\
:kd=\ED:kh=\E[H:kl=\E[D:kr=\E[C:ku=\EM:le=^H:mb=\E[5m:\
:md=\E[1m:me=\E[m:mk=\E[=6;<5:mr=\E[7m:nd=\E[C:se=\E[m:\
:sf=\E[S:so=\E[7m:sr=\E[T:ta=^I:\
:te=\E[?6h\E%!0\ELBP0\E%!1\E[32;1f:ti=\E[?6l\E[H\E[J:\
:ue=\E[m:up=\EM:us=\E[4m:
# From: <carolyn@dali.berkeley.edu> Thu Oct 31 12:54:27 1985
# (tek4404: There was a "\!" in :ti: that I replaced with "\E!".
# Tab had been given as \E2I,that must be the tab-set capability -- esr)
tek4404|tektronix 4404:\
:bs:\
:co#80:it#8:li#32:\
:al=\E[1L:cd=\E[J:ce=\E[K:cl=\E[H\E[2J:cm=\E[%i%d;%dH:\
:cs=\E[%i%d;%dr:dc=\E[P:dl=\E[1M:do=^J:ei=\E[4l:ho=\E[H:\
:im=\E[4h:kd=\E[B:ke=\E[?1h:kl=\E[D:kr=\E[C:ks=\E[?1l:\
:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[m:nd=\E[C:rc=\E8:\
:sc=\E7:se=\E[27m:so=\E[7m:st=\E[2I:ta=^I:\
:te=\E[1;1H\E[0J\E[?6h\E[?1l:\
:ti=\E%\E!1\E[1;32r\E[?6l\E>:ue=\E[m:up=\E[A:us=\E[4m:
# Some unknown person wrote:
# I added the is string - straight Unix has ESC ; in the login
# string which sets a ct8500 into monitor mode (aka 4025 snoopy
# mode). The is string here cleans up a few things (but not
# everything).
ct8500|tektronix ct8500:\
:am:bw:da:db:\
:co#80:li#25:\
:al=\E^L:bl=^G:bt=\E^I:cd=\E^U:ce=\E^T:cl=\E^E:\
:cm=\E|%+ %+ :cr=^M:dc=\E^]:dl=\E^M:do=^J:ei=:ic=\E^\:im=:\
:is=\037\EZ\Ek:le=^H:me=\E\040:nd=\ES:se=\E\040:sf=^J:\
:so=\E$:sr=\E^A:ta=^I:ue=\E\040:up=\ER:us=\E!:
# Tektronix 4205 terminal.
#
# am is not defined because the wrap around occurs not when the char.
# is placed in the 80'th column, but when we are attempting to type
# the 81'st character on the line. (esr: hmm, this is like the vt100
# version of xenl, perhaps am + xenl would work!)
#
# Bold, dim, and standout are simulated by colors and thus not allowed
# with colors. The tektronix color table is mapped into the RGB color
# table by setf/setb. All colors are reset to factory specifications by oc.
# The <initc> cap uses RGB notation to define colors. for arguments 1-3 the
# interval (0-1000) is broken into 8 smaller sub-intervals (125). Each sub-
# interval then maps into pre-defined value.
tek4205|tektronix 4205:\
:cc:mi:ms:\
:Co#8:NC#49:co#80:it#8:li#30:pa#63:\
:AL=\E[%dL:DO=\E[%dB:IC=\E[%d@:LE=\E[%dD:RI=\E[%dC:\
:UP=\E[%dA:\
:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
:ae=^O:al=\E[1L:as=^N:bl=^G:bt=\E[Z:cb=\E[1K:cd=\E[J:\
:ce=\E[K:cl=\E[2J\E[H:cm=\E[%i%d;%dH:cr=^M:ct=\E[1g:\
:dc=\E[1P:dl=\E[1M:do=\E[B:eA=\E)0:ec=\E%dX:ei=\E[4l:\
:ho=\E[H:i1=\E%!0\ETM1\E%!1\E[m:im=\E[4h:k0=\EOA:k1=\EOB:\
:k2=\EOC:k3=\EOD:k4=\EP:k5=\EQ:k6=\ER:k7=\ES:kb=^H:kd=\E[B:\
:kl=\E[D:kr=\E[C:ku=\E[A:le=\E[D:mb=\E[5m:md=\E[=7;<4m:\
:me=\E[=0;<1m\E[24;25;27m\017:mh=\E[=1;<6m:mk=\E[=6;<5:\
:mr=\E[7m:nd=\E[C:\
:oc=\E%!0\ETFB000001F4F4F42F40030F404A4C<F450F4F46F40F47F4F40\E%!1:\
:op=\E[39;40m:se=\E[=0;<1m:sf=\ED:so=\E[=2;<3m:sr=\EM:\
:ta=^I:te=:ti=\E%%!1\E[?6l\E[2J:ue=\E[24m:up=\E[A:\
:us=\E[4m:
#### Teletype (tty)
#
# These are the hardcopy Teletypes from before AT&T bought the company,
# clattering electromechanical dinosaurs in Bakelite cases that printed on
# pulpy yellow roll paper. If you remember these you go back a ways.
# Teletype-branded VDTs are listed in the AT&T section.
#
# The earliest UNIXes were designed to use these clunkers; nroff and a few
# other programs still default to emitting codes for the Model 37.
#
tty33|tty35|model 33 or 35 teletype:\
:hc:os:xo:\
:co#72:\
:bl=^G:cr=^M:do=^J:sf=^J:
tty37|model 37 teletype:\
:bs:hc:os:xo:\
:bl=^G:cr=^M:do=^J:hd=\E9:hu=\E8:le=^H:sf=^J:up=\E7:
# There are known to be at least three flavors of the tty40, all seem more
# like IBM half duplex forms fillers than ASCII terminals. They have lots of
# awful braindamage, such as printing a visible newline indicator after each
# newline. The 40-1 is a half duplex terminal and is hopeless. The 40-2 is
# braindamaged but has hope and is described here. The 40-4 is a 3270
# lookalike and beyond hope. The terminal has visible bell but I don't know
# it - it's null here to prevent it from showing the BL character.
# There is an \EG in <nl> because of a bug in old vi (if stty says you have
# a "newline" style terminal (-crmode) vi figures all it needs is nl
# to get crlf, even if :cr: is not ^M.)
# (tty40: removed obsolete ":nl=\EG\EB:", it's just do+cr -- esr)
tty40|ds40|ds40-2|dataspeed40|teletype dataspeed 40/2:\
:bs:xo:\
:co#80:li#24:\
:al=50\EL:cd=75\EJ:cl=80\EH\EJ:cr=\EG:ct=80\EH\E2:\
:dc=50\EP:dl=50\EM:do=\EB:ei=:ho=10\EH:ic=50\E\136:im=:\
:kb=^]:kl=^H:le=^H:nd=\EC:pf=^T:po=2000\022:rs=60\023\ER:\
:se=\E4:sf=20\ES:so=\E3:sr=10\ET:st=\E1:ta=10\E@:up=\E7:
tty43|model 43 teletype:\
:am:bs:hc:os:xo:\
:co#132:\
:bl=^G:cr=^M:do=^J:kb=^H:le=^H:sf=^J:
#### Tymshare
#
# You can add :is=\E<: to put this 40-column mode, though I can't
# for the life of me think why anyone would want to.
scanset|sc410|sc415|Tymshare Scan Set:\
:am:bw:ms:\
:co#80:li#24:\
:ac=j%k4l<m-q,x5:ae=^O:as=^N:bl=^G:cd=\EJ:ce=\EK:cl=\EH\EJ:\
:cm=\EY%+ %+ :cr=^M:do=^J:ho=\EH:kd=\EB:kl=\ED:kr=\EC:\
:ku=\EA:le=^H:nd=^I:pf=\E;0:po=\E;0:ps=\E;3:r1=\E>:rc=^C:\
:sc=^B:sf=^J:up=^K:
#### Volker-Craig (vc)
#
# If you saw a Byte Magazine cover with a terminal on it during the early
# 1980s, it was probably one of these. Carl Helmers liked them because
# they could crank 19.2 and were cheap (that is, he liked them until he tried
# to program one...)
#
# Missing in vc303a and vc303 descriptions: they scroll 2 lines at a time
# every other linefeed.
vc303|vc103|vc203|volker-craig 303:\
:am:bs:ns:\
:co#80:li#24:\
:bl=^G:cl=40\014:cr=^M:do=^J:ho=40\013:kd=^J:kl=^H:kr=^I:\
:ku=^N:le=^H:ll=\017W:nd=^I:up=^N:
vc303a|vc403a|volker-craig 303a:\
:ce=20\026:cl=40\030:ho=40\031:kr=^U:ku=^Z:ll=^P:nd=^U:\
:up=^Z:tc=vc303:
# (vc404: removed obsolete ":ma=^Z^P^U :" -- esr)
vc404|volker-craig 404:\
:am:bs:\
:co#80:li#24:\
:bl=^G:cd=40\027:ce=20\026:cl=40\030:cm=\020%+ %+ :cr=^M:\
:do=^J:ho=40\031:kd=^J:kl=^H:kr=^U:ku=^Z:le=^H:nd=^U:sf=^J:\
:up=^Z:
vc404-s|volker-craig 404 w/standout mode:\
:do=^J:se=^O:so=^N:tc=vc404:
# From: <wolfgang@cs.sfu.ca>
# (vc414: merged in cup/dl1/home from an old vc414h-noxon)
vc414|vc414h|Volker-Craig 414H in sane escape mode.:\
:am:bs:\
:co#80:li#24:\
:al=40\E\032:cd=\E^X:ce=10\E\017:cl=40\E\034:\
:cm=40\E\021%r%.%.:dc=\E3:dl=40\E\023:do=\E^K:ei=:ho=\E^R:\
:ic=\E\072:im=:k0=\EA:k1=\EB:k2=\EC:k3=\ED:k4=\EE:k5=\EF:\
:k6=\EG:k7=\EH:kd=\E^K:kh=\E^R:kl=^H:kr=^P:ku=\E^L:l0=PF1:\
:l1=PF2:l2=PF3:l3=PF4:l4=PF5:l5=PF6:l6=PF7:l7=PF8:nd=^P:\
:se=\E^_:so=\E^Y:up=\E^L:
vc415|volker-craig 415:\
:cl=^L:tc=vc404:
######## OBSOLETE PERSONAL-MICRO CONSOLES AND EMULATIONS
#
#### IBM PC and clones
#
# The pcplot IBM-PC terminal emulation program is really messed up. It is
# supposed to emulate a vt-100, but emulates the wraparound bug incorrectly,
# doesn't support scrolling regions, ignores add line commands, and ignores
# delete line commands. Consequently, the resulting behavior looks like a
# crude adm3a-type terminal.
# Steve Jacobson 8/85
pcplot|pc-plot terminal emulation program:\
:xn@:\
:AL@:DL@:al@:cs@:dl@:rc@:sc@:tc=vt100:
# KayPro II from Richard G Turner <rturner at Darcom-Hq.ARPA>
# I've found that my KayPro II, running MDM730, continues to emulate an
# ADM-3A terminal, just like I was running TERM.COM. On our 4.2 UNIX
# system the following termcap entry works well:
# I have noticed a couple of minor glitches, but nothing I can't work
# around. (I added two capabilities from the BRL entry -- esr)
kaypro|kaypro2|kaypro II:\
:am:bs:\
:co#80:li#24:\
:al=\EE:bl=^G:cd=^W:ce=^X:cl=1\032:cm=\E=%+ %+ :cr=^M:\
:dl=\ER:do=^J:ho=^^:kd=^J:kr=^L:ku=^K:nd=^L:sf=^J:up=^K:
# From IBM, Thu May 5 19:35:27 1983
# (ibmpc: commented out :im:=\200R because we don't know :ei: -- esr)
ibm-pc|ibm5051|5051|IBM Personal Computer (no ANSI.SYS):\
:am:bs:\
:co#80:li#24:\
:bl=^G:cl=^L^K:cr=^M^^:do=^J:ho=^K:kd=^_:le=^]:nd=^\:sf=10\n:\
:up=^^:
ibmpc|wy60-PC|wyse60-PC|IBM PC/XT running PC/IX:\
:am:bs:bw:eo:hs:km:ms:ul:\
:co#80:it#8:li#24:\
:@7=\E[Y:DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:SF=\E[%dS\E[%dB:\
:SR=\E[%dT\E[%dA:UP=\E[%dA:\
:ac=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263:\
:bl=^G:cd=\E[J:ce=\E[K:ch=\E[%i%dG:cl=\Ec:cm=\E[%i%d;%dH:\
:cr=^M:do=\E[B:ec=\E[%dX:ho=\E[H:k1=\240:k2=\241:k3=\242:\
:k4=\243:k5=\244:k6=\245:k7=\246:k8=\247:k9=\250:k;=\251:\
:kB=^]:kD=\177:kI=\E[^H:kN=\E[U:kP=\E[V:kb=^H:kd=\E[B:\
:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=\E[D:ll=\E[24;1H:\
:mb=\E[5m:md=\E[1m:me=\E[m:mk=\E[30;40m:mr=\E[7m:nd=\E[C:\
:nw=^M:se=\E[m:sf=\E[S\E[B:so=\E[7m:sr=\E[T\E[A:ue=\E[m:\
:up=\E[A:us=\E[4m:
#### Apple II
#
# Apple II firmware console first, then various 80-column cards and
# terminal emulators. For two cents I'd toss all these in the UFO file
# along with the 40-column apple entries.
#
# From: brsmith@umn-cs.cs.umn.edu (Brian R. Smith) via BRL
# 'it#8' tells UNIX that you have tabs every 8 columns. This is a
# function of TIC, not the firmware.
# The clear key on a IIgs will do something like clear-screen,
# depending on what you're in.
appleIIgs|appleIIe|appleIIc|Apple 80 column firmware interface:\
:am:bs:bw:eo:ms:\
:co#80:it#8:li#24:\
:bl=^G:cd=^K:ce=^]:cl=^L:cm=\036%r%+ %+ :cr=^M:do=^J:ho=^Y:\
:kC=^X:kD=\177:kb=^H:kd=^J:kl=^H:kr=^U:ku=^K:le=^H:nd=^\:\
:nw=^M^W:se=^N:sf=^W:so=^O:sr=^V:ta=^I:up=^_:
# Apple //e with 80-column card, entry from BRL
# The modem interface is permitted to discard LF (maybe DC1), otherwise
# passing characters to the 80-column firmware via COUT (PR#3 assumed).
# Auto-wrap does not work right due to newline scrolling delay, which also
# requires that you set "stty cr2".
# Note: Cursor addressing is only available via the Pascal V1.1 entry,
# not via the BASIC PR#3 hook. All this nonsense can be avoided only by
# using a terminal emulation program instead of the built-in firmware.
apple2e|Apple //e:\
:bw:ms:\
:co#80:li#24:\
:bl=^G:cd=4*\013:ce=4\035:cl=100\014:do=^J:ho=^Y:is=^R^N:\
:kb=^H:kd=^J:kl=^H:kr=^U:ku=^K:le=^H:me=^N:mr=^O:nw=100\r:\
:r1=^R^N:se=^N:sf=^W:so=^O:sr=^V:ta=^I:up=^_:
# mcvax!vu44!vu45!wilcke uses the "ap" entry together with Ascii Express Pro
# 4.20, with incoming and outgoing terminals both on 0, emulation On.
apple2e-p|Apple //e via Pascal:\
:cm=\036%r%+ %+ :kb=^H:kd=^J:kl=^H:tc=apple2e:
# (ASCII Express) MouseTalk "Standard Apple //" emulation from BRL
# Enable DC3/DC1 flow control with "stty ixon -ixany".
apple-ae|ASCII Express:\
:am:bs:bw:ms:nx:xo:\
:co#80:it#8:li#24:\
:bl=500\007:cd=^K:ce=^]:cl=^L:cm=\036%r%+ %+ :cr=^M:do=^J:\
:ho=^Y:is=^R^N:kC=^X:kd=^J:kl=^H:kr=^U:ku=^K:le=^H:me=^N:\
:mr=^O:nd=^U:r1=^R^N:se=^N:sf=^W:so=^O:sr=^V:up=^_:
appleII|apple ii plus:\
:am:bs:\
:co#80:it#8:li#24:\
:cd=^K:ce=^]:cl=^L:cm=\036%r%+ %+ :do=^J:ho=\E^Y:\
:is=\024T1\016:kd=^J:kr=^U:le=^H:me=^N:nd=^\:se=^N:so=^O:\
:ta=^I:up=^_:vb=\024G1\024T1:ve=^TC2:vs=^TC6:
# Originally by Gary Ford 21NOV83
# From: <ee178aci%sdcc7@SDCSVAX.ARPA> Fri Oct 11 21:27:00 1985
apple-80|apple II with smarterm 80 col:\
:am:bs:bw:\
:co#80:li#24:\
:bt=^R:cd=10*\013:ce=10\035:cl=10*\014:cm=\036%r%+ %+ :\
:cr=10*\r:do=^J:ho=^Y:le=^H:nd=^\:up=^_:
apple-soroc|apple emulating soroc 120:\
:am:\
:co#80:li#24:\
:bl=^G:cd=\EY:ce=\ET:cl=300\E*:cm=\E=%+ %+ :cr=^M:do=^J:\
:ho=^^:kd=^J:kl=^H:kr=^L:ku=^K:le=^H:nd=^L:sf=^J:up=^K:
# From Peter Harrison, Computer Graphics Lab, San Francisco
# ucbvax!ucsfmis!harrison .....uucp
# ucbvax!ucsfmis!harrison@BERKELEY .......ARPA
# "These two work. If you don't have the inverse video chip for the
# Apple with videx then remove the :so: and :se: fields."
# (apple-videx: this used to be called DaleApple -- esr)
apple-videx|Apple with videx videoterm 80 column board with inverse video:\
:am:bs:xn:\
:co#80:it#8:li#24:\
:cd=^K:ce=^]:cl=300\014:cm=\036%r%+ %+ :do=^J:ho=^Y:kd=^J:\
:kh=^Y:kl=^H:kr=^U:le=^H:me=^Z2:nd=^\:se=^Z2:so=^Z3:ta=^I:\
:up=^_:
# My system [for reference] : Apple ][+, 64K, Ultraterm display card,
# Apple Cat ][ 212 modem, + more all
# controlled by ASCII Express: Pro.
# From Dave Shaver <isucs1!shaver>
apple-uterm-vb|Videx Ultraterm for Apple micros with Visible Bell:\
:am:bs:eo:xt:\
:co#80:li#24:\
:ac=:cd=^K:ce=^]:cl=^L:cm=\036%r%+ %+ :ho=^Y:\
:is=^V4^W06\017\rVisible Bell Installed.\016\r\n:\
:nd=^\:se=^N:so=^O:up=^_:vb=^W35^W06:
apple-uterm|Ultraterm for Apple micros:\
:am:bs:eo:xt:\
:co#80:li#24:\
:ac=:cd=^K:ce=^]:cl=^L:cm=\036%r%+ %+ :ho=^Y:\
:is=^V4^W06\016:nd=^\:se=^N:so=^O:up=^_:
# from trwrba!bwong (Bradley W. Wong):
#
# This entry assumes that you are using an apple with the UCSD Pascal
# language card. SYSTEM.MISCINFO is assumed to be the same as that
# supplied with the standard apple except that screenwidth should be set
# using SETUP to 80 columns. Note that the right arrow is not mapped in
# this termcap entry. This is because that key, on the Apple, transmits
# a ^U and would thus preempt the more useful "up" function of vi.
#
# HMH 2/23/81
apple80p|80-column apple with Pascal card:\
:am:bw:\
:co#80:li#24:\
:cd=^K:ce=^]:cl=^Y^L:cm=\036%r%+ %+ :ho=^Y:kl=^H:nd=^\\072:\
:up=^_:
#
# Apple II+ equipped with Videx 80 column card
#
# Terminfo from ihnp4!ihu1g!djc1 (Dave Christensen) via BRL;
# manually converted by D A Gwyn
#
# DO NOT use any terminal emulation with this data base, it works directly
# with the Videx card. This has been tested with vi 1200 baud and works fine.
#
# This works great for vi, except I've noticed in pre-R2, ^U will scroll back
# 1 screen, while in R2 ^U doesn't.
# For inverse alternate character set add:
# :as:=^O::ae:=^N:
# (apple-v: added it#8 -- esr)
apple-videx2|Apple II+ w/ Videx card (similar to Datamedia h1520):\
:am:xn:\
:co#80:it#8:li#24:\
:bl=100\007:cd=16*\013:ce=^]:cl=16*\014:cm=\036%r%+ %+ :\
:cr=^M:do=^J:ho=^Y:kb=^H:kd=^J:kh=^Y:kl=^H:kr=^\:ku=^_:le=^H:\
:nd=^\:se=^Z2:sf=^J:so=^Z3:ta=8\011:up=^_:
apple-videx3|vapple|Apple II with 80 col card:\
:am:bs:\
:co#80:li#24:\
:ce=\Ex:cl=\Ev:cm=\EY%+ %+ :do=\EB:ho=\EH:k0=\EP:k1=\EQ:\
:k2=\ER:k3=\E\040:k4=\E!:k5=\E":k6=\E#:k7=\E$:k8=\E%%:\
:k9=\E&:kd=\EB:kh=\EH:kl=\ED:kr=\EC:ku=\EA:le=\ED:nd=\EC:\
:up=\EA:
#From: decvax!cbosgd!cbdkc1!mww Mike Warren via BRL
aepro|Apple II+ running ASCII Express Pro--vt52:\
:bs:\
:co#80:li#24:\
:cd=\EJ:ce=\EK:cl=300\014:cm=\EY%+ %+ :do=\EB:ho=\EH:\
:le=\ED:nd=\EC:up=\EA:
# UCSD addition: Yet another termcap from Brian Kantor's Micro Munger Factory
apple-vm80|ap-vm80|apple with viewmax-80:\
:bs:\
:co#80:li#24:\
:cd=300\013:ce=^]:cl=300\014:cm=100\036%+ %+ :ho=200\031:\
:nd=^\\072:up=^_:
#### Apple Lisa & Macintosh
#
# (lisa: changed :vs: to :ve: -- esr)
lisa|apple lisa console display (black on white):\
:am:bs:eo:ms:\
:co#88:it#8:li#32:\
:ac=jdkclfmenbqattuvvuwsx`:ae=\E[10m:al=\E[L:as=\E[11m:\
:cd=\E[J:ce=\E[K:cl=^L:cm=\E[%i%d;%dH:dc=\E[P:dl=\E[M:\
:do=\E[B:ei=:ho=\E[H:ic=\E[@:im=:is=\E>\E[m\014:kb=^H:\
:kd=\E[B:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:me=\E[m:nd=\E[C:\
:se=\E[m:so=\E[7m:ta=^I:ue=\E[m:up=\E[A:us=\E[4m:ve=\E[5l:\
:vi=\E[5h:
liswb|apple lisa console display (white on black):\
:is=\E>\E[0;7m\014:se=\E[0;7m:so=\E[m:ue=\E[0;7m:\
:us=\E[4m:tc=lisa:
# lisaterm from ulysses!gamma!epsilon!mb2c!jed (John E. Duncan III) via BRL;
# :is: revised by Ferd Brundick <fsbrn@BRL.ARPA>
#
# These entries assume that the 'Auto Wraparound' is enabled.
# Xon-Xoff flow control should also be enabled.
#
# The vt100 uses :rs2: and :rf: rather than :is2:/:tbc:/:hts: because the tab
# settings are in non-volatile memory and don't need to be reset upon login.
# Also setting the number of columns glitches the screen annoyingly.
# You can type "reset" to get them set.
#
lisaterm|Apple Lisa or Lisa/2 running LisaTerm vt100 emulation:\
:am:bs:pt:xn:xo:\
:co#80:it#8:kn#4:li#24:vt#3:\
:DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:bl=^G:cd=\E[J:\
:ce=\E[K:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:\
:cs=\E[%i%d;%dr:ct=\E[3g:do=^J:ho=\E[H:k0=\EOP:k1=\EOQ:\
:k2=\EOR:k3=\EOS:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:\
:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:l0=F1:l1=F2:l2=F3:l3=F4:le=^H:\
:mb=\E[5m:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:\
:r1=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r:\
:rc=\E8:sc=\E7:se=\E[m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
:ue=\E[m:up=\E[A:us=\E[4m:
# Lisaterm in 132 column ("wide") mode.
lisaterm-w|Apple Lisa with Lisaterm in 132 column mode:\
:co#132:\
:kb=^H:kd=^J:kl=^H:tc=lisaterm:
# Although MacTerminal has insert/delete line, it is commented out here
# since it is much faster and cleaner to use the "lock scrolling region"
# method of inserting and deleting lines due to the MacTerminal implementation.
# Also, the "Insert/delete ch" strings have an extra character appended to them
# due to a bug in MacTerminal V1.1. Blink is disabled since it is not
# supported by MacTerminal.
mac|macintosh|Macintosh with MacTerminal:\
:xn:\
:dN#30:\
:dc=7\E[P:ei=:ic=9\E[@:im=:ip=7:mb@:tc=lisa:
# Lisaterm in 132 column ("wide") mode.
mac-w|macterminal-w|Apple Macintosh with Macterminal in 132 column mode:\
:co#132:tc=mac:
# nsterm*|Apple_Terminal - AppKit Terminal.app
#
# Terminal.app is a Terminal emulator bundled with NeXT's NeXTStep and
# OPENSTEP/Mach operating systems, and with Apple's Rhapsody, Mac OS X
# Server and Mac OS X operating systems. There is also a
# "terminal.app" in GNUStep, but I believe it to be an unrelated
# codebase and I have not attempted to describe it here.
#
# For NeXTStep, OPENSTEP/Mach, Rhapsody and Mac OS X Server 1.0, you
# are pretty much on your own. Use "nsterm-7-m" and hope for the best.
# You might also try "nsterm-7" and "nsterm-old" if you suspect your
# version supports color.
#
# To determine the version of Terminal.app you're using by running:
#
# echo "$TERM_PROGRAM" "$TERM_PROGRAM_VERSION"
#
# For Apple_Terminal v200+, use "nsterm-16color" (a.k.a. "nsterm")
#
# For Apple_Terminal v71+/v100+, use "nsterm-bce".
#
# For Apple_Terminal v51+, use "nsterm-7-c" or "nsterm-7-c-s".
#
# For Apple_Terminal v41+, use "nsterm-old", or "nsterm-s".
#
# For all earlier versions (Apple_Terminal), try "nsterm-7-m"
# (monochrome) or "nsterm-7" (color); "nsterm-7-m-s" and "nsterm-7-s"
# might work too, but really you're on your own here since these
# systems are very obsolete and I can't test them. I do welcome
# patches, though :).
# Other Terminals:
#
# For GNUstep_Terminal, you're probably best off using "linux" or
# writing your own terminfo.
# For MacTelnet, you're on your own. It's a different codebase, and
# seems to be somewhere between "vt102", "ncsa" and "xterm-color".
# For iTerm.app, see "iterm".
#
# The AppKit Terminal.app descriptions all have names beginning with
# "nsterm". Note that the statusline (-s) versions use the window
# titlebar as a phony status line, and may produce warnings during
# compilation as a result ("tsl uses 0 parameters, expected 1".)
# Ignore these warnings, or even ignore these entries entirely. Apps
# which need to position the cursor or do other fancy stuff inside the
# status line won't work with these entries. They're primarily useful
# for programs like Pine which provide simple notifications in the
# status line. Please note that non-ASCII characters don't work right
# in the status line, since Terminal.app incorrectly interprets their
# Unicode codepoints as MacRoman codepoints (in earlier Mac OS X
# versions) or only accepts status lines consisting entirely of
# characters from the first 256 Unicode positions (including C1 but
# not C0 or DEL.)
#
# The Mythology* of AppKit Terminal.app:
#
# In the days of NeXTSTep 0.x and 1.x there were two incompatible
# bundled terminal emulators, Shell and Terminal. Scott Hess wrote a
# shareware replacement for Terminal called "Stuart" which NeXT bought
# and used as the basis for the Terminal.app in NeXTstep 2+,
# OPENSTEP/Mach, Apple Rhapsody, Mac OS X Server 1.0, and Mac OS X. I
# don't know the TERM_PROGRAM and TERM_PROGRAM_VERSION settings or
# capabilities for the early versions, but I believe that the
# TERM_PROGRAM_VERSION may have been reset at some point.
#
# The early versions were tailored to the NeXT character set. Sometime
# after the Apple aquisition the encoding was swiched to MacRoman
# (initally with serious altcharset bugs due to incomplete conversion
# of the old NeXT code,) and then later to UTF-8. Alos sometime during
# or just prior to the early days of Mac OS X, the Terminal grew ANSI
# 8-color support (initially buggy when combined with attributes, but
# that was later fixed.) More recently, around Mac OS X version 10.3
# or so (Terminal.app v100+) xterm-like 16-color support was added. In
# some versions (for instance 133-1 which shipped with Mac OS X
# version 10.4) this suffered from the <bce> bug, but that seems to
# have been fixed in Mac OS X version 10.5 (Terminal.app v240.2+).
#
# In the early days of Mac OS X the terminal was fairly buggy and
# would routinely crash under load. Many of these bugs seem to have
# been fixed around Mac OS X version 10.3 (Terminal.app v100+) but
# some may still remain. This change seems to correspond to
# Terminal.app reporting "xterm-color" as $TERM rather than "vt100" as
# it did previously.
#
# * This may correspond with what actually happened, but I don't
# know. It is based on guesswork, hearsay, private correspondence,
# my faulty memory, and the following online sources and references:
#
# [1] "Three Scotts and a Duane" by Simson L. Garfinkel
# http://www.nextcomputers.org/NeXTfiles/Articles/NeXTWORLD/93.8/93.8.Dec.Community1.html
#
# [2] NeXTSTEP entry from Wikipedia, the free encyclopedia
# https://secure.wikimedia.org/wikipedia/en/wiki/Nextstep
#
# * Renamed the AppKit Terminal.app entry from "Apple_Terminal" to
# "nsterm" to comply with the name length and case conventions and
# limitations of various software packages [notably Solaris terminfo
# and UNIX.] A single Apple_Terminal alias is retained for
# backwards-compatbility.
#
# * Added function key support (F1-F4). These only work in Terminal.app
# version 51, hopefully the capabilities won't cause problems for people
# using version 41.
#
# * Added "full color" (-c) entries which support the 16-color mode in
# version 51.
#
# * By default, version 51 uses UTF-8 encoding with broken altcharset
# support, so "ASCII" (-7) entries without altcharset support were
# added.
# nsterm - AppKit Terminal.app
#
# Apple's Mac OS X includes a Terminal.app derived from the old NeXT
# Terminal.app. It is a partial VT100 emulation with some xterm-like
# extensions. This terminfo was written to describe versions 41
# (shipped with Mac OS X version 10.0) and 51 (shipped with Mac OS X
# version 10.1) of Terminal.app.
#
# Terminal.app runs under the Mac OS X Quartz windowing system (and
# other AppKit-supported windowing systems.) On the Mac OS X machine I
# use, the executable for Terminal.app is:
# /Applications/Utilities/Terminal.app/Contents/MacOS/Terminal
#
# If you're looking for a description of the full-screen system
# console which runs under Apple's Darwin operating system on PowerPC
# platforms, see the "xnuppc" entry instead.
#
# There were no function keys in version 41. In version 51, there are
# four working function keys (F1, F2, F3 and F4.) The function keys
# are included in all of these entries.
#
# It does not support mouse pointer position reporting. Under some
# circumstances the cursor can be positioned using option-click; this
# works by comparing the cursor position and the selected position,
# and simulating enough cursor-key presses to move the cursor to the
# selected position. This technique fails in all but the simplest
# applications.
#
# It provides partial ANSI color support (background colors interacted
# badly with bold in version 41, though, as reflected in :ncv:.) The
# monochrome (-m) entries are useful if you've disabled color support
# or use a monochrome monitor. The full color (-c) entries are useful
# in version 51, which doesn't exhibit the background color bug. They
# also enable an xterm-compatible 16-color mode.
#
# The configurable titlebar is set using xterm-compatible sequences;
# it is used as a status bar in the statusline (-s) entries. Its width
# depends on font sizes and window sizes, but 50 characters seems to
# be the default for an 80x24 window.
#
# The MacRoman character encoding is used for some of the alternate
# characters in the "MacRoman" entries; the "ASCII" (-7) entries
# disable alternate character set support entirely, and the "VT100"
# (-acs) entries rely instead on Terminal.app's own buggy VT100
# graphics emulation, which seems to think the character encoding is
# the old NeXT charset instead of MacRoman. The "ASCII" (-7) entries
# are useful in Terminal.app version 51, which supports UTF-8 and
# other ASCII-compatible character encodings but does not correctly
# implement VT100 graphics; once VT100 graphics are correctly
# implemented in Terminal.app, the "VT100" (-acs) entries should be
# usable in any ASCII-compatible character encoding [except perhaps
# in UTF-8, where some experts argue for disallowing alternate
# characters entirely.]
#
# Terminal.app reports "vt100" as the terminal type, but exports
# several environment variables which may aid detection in a shell
# profile (i.e. .profile or .login):
#
# TERM=vt100
# TERM_PROGRAM=Apple_Terminal
# TERM_PROGRAM_VERSION=41 # in Terminal.app version 41
# TERM_PROGRAM_VERSION=51 # in Terminal.app version 51
#
# For example, the following Bourne shell script would detect the
# correct terminal type:
#
# if [ :"$TERM" = :"vt100" -a :"$TERM_PROGRAM" = :"Apple_Terminal" ]
# then
# export TERM
# if [ :"$TERM_PROGRAM_VERSION" = :41 ]
# then
# TERM="nsterm-old"
# else
# TERM="nsterm-c-7"
# fi
# fi
#
# In a C shell derivative, this would be accomplished by:
#
# if ( $?TERM && $?TERM_PROGRAM && $?TERM_PROGRAM_VERSION) then
# if ( :"$TERM" == :"vt100" && :"$TERM_PROGRAM" == :"Apple_Terminal" ) then
# if ( :"$TERM_PROGRAM_VERSION" == :41 ) then
# setenv TERM "nsterm-old"
# else
# setenv TERM "nsterm-c-7"
# endif
# endif
# endif
# The '+' entries are building blocks
nsterm+7|AppKit Terminal.app v41+ basic capabilities w/ASCII charset:\
:am:bw:ms:xn:xo:\
:co#80:it#8:li#24:\
:@8=\EOM:AL=\E[%dL:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:\
:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:UP=\E[%dA:al=\E[L:bl=^G:\
:cb=\E[1K:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:\
:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dl=\E[M:do=^J:ho=\E[H:\
:kb=\177:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:kr=\EOC:\
:ks=\E[?1h\E=:ku=\EOA:le=^H:mb=\E[5m:md=\E[1m:me=\E[m:\
:mk=\E[8m:mr=\E[7m:nd=\E[C:rc=\E8:\
:rs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:sc=\E7:se=\E[m:\
:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:ue=\E[m:up=\E[A:\
:us=\E[4m:tc=vt100+enq:tc=vt100+pfkeys:
nsterm+acs|AppKit Terminal.app v41+ basic capabilities w/VT100 alternate-charset:\
:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
:ae=^O:as=^N:eA=\E(B\E)0:me=\E[0m:tc=nsterm+7:
nsterm+mac|AppKit Terminal.app v41+ basic capabilities w/MacRoman alternate-charset:\
:ac=+\335,\334-\366.\3770#`\327a\072f\241g\261h#i\360jjkkllmmnno\370p\370q\321rrssttuuvvwwxxy\262z\263{\271|\255}\243~\245:\
:ae=^O:as=^N:eA=\E(B\E)0:me=\E[0m:tc=nsterm+7:
nsterm+s|AppKit Terminal.app v41+ status-line (window titlebar) support:\
:hs:\
:ws#50:\
:ds=\E]2;\007:fs=^G:ts=\E]2;:
nsterm+c|AppKit Terminal.app v51+ full color support (including 16 colors):\
:op=\E[0m:tc=ibm+16color:
nsterm+c41|AppKit Terminal.app v41 color support:\
:Co#8:NC#37:pa#64:\
:AB=\E[4%dm:AF=\E[3%dm:op=\E[0m:
# These are different combinations of the building blocks
# ASCII charset (-7)
nsterm-m-7|nsterm-7-m|AppKit Terminal.app v41+ w/ASCII charset (monochrome):\
:tc=nsterm+7:
nsterm-m-s-7|nsterm-7-m-s|AppKit Terminal.app v41+ w/ASCII charset (monochrome w/statusline):\
:tc=nsterm+s:tc=nsterm+7:
nsterm-7|AppKit Terminal.app v41+ w/ASCII charset (color):\
:tc=nsterm+c41:tc=nsterm+7:
nsterm-7-c|nsterm-c-7|AppKit Terminal.app v51+ w/ASCII charset (full color):\
:tc=nsterm+c:tc=nsterm+7:
nsterm-s-7|nsterm-7-s|AppKit Terminal.app v41+ w/ASCII charset (color w/statusline):\
:tc=nsterm+s:tc=nsterm+c41:tc=nsterm+7:
nsterm-c-s-7|nsterm-7-c-s|AppKit Terminal.app v51+ w/ASCII charset (full color w/statusline):\
:tc=nsterm+s:tc=nsterm+c:tc=nsterm+7:
# VT100 alternate-charset (-acs)
nsterm-m-acs|nsterm-acs-m|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome):\
:tc=nsterm+acs:
nsterm-m-s-acs|nsterm-acs-m-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome w/statusline):\
:tc=nsterm+s:tc=nsterm+acs:
nsterm-acs|AppKit Terminal.app v41+ w/VT100 alternate-charset (color):\
:tc=nsterm+c41:tc=nsterm+acs:
nsterm-c-acs|nsterm-acs-c|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color):\
:tc=nsterm+c:tc=nsterm+acs:
nsterm-s-acs|nsterm-acs-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (color w/statusline):\
:tc=nsterm+s:tc=nsterm+c41:tc=nsterm+acs:
nsterm-c-s-acs|nsterm-acs-c-s|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color w/statusline):\
:tc=nsterm+s:tc=nsterm+c:tc=nsterm+acs:
# MacRoman charset
nsterm-m|AppKit Terminal.app v41+ w/MacRoman charset (monochrome):\
:tc=nsterm+mac:
nsterm-m-s|AppKit Terminal.app v41+ w/MacRoman charset (monochrome w/statusline):\
:tc=nsterm+s:tc=nsterm+mac:
nsterm-old|AppKit Terminal.app v41+ w/MacRoman charset (color):\
:tc=nsterm+c41:tc=nsterm+mac:
nsterm-c|AppKit Terminal.app v51+ w/MacRoman charset (full color):\
:tc=nsterm+c:tc=nsterm+mac:
nsterm-s|AppKit Terminal.app v41+ w/MacRoman charset (color w/statusline):\
:tc=nsterm+s:tc=nsterm+c41:tc=nsterm+mac:
nsterm-c-s|AppKit Terminal.app v51+ w/MacRoman charset (full color w/statusline):\
:tc=nsterm+s:tc=nsterm+c:tc=nsterm+mac:
# In Mac OS X version 10.5 the format of the preferences has changed
# and a new, more complex technique is needed, e.g.,
#
# python -c 'import sys,objc;NSUserDefaults=objc.lookUpClass(
# "NSUserDefaults");ud=NSUserDefaults.alloc();
# ud.init();prefs=ud.persistentDomainForName_(
# "com.apple.Terminal");prefs["Window Settings"][
# prefs["Default Window Settings"]]["TerminalType"
# ]=sys.argv[1];ud.setPersistentDomain_forName_(prefs,
# "com.apple.Terminal")' nsterm-16color
#
# and it is still not settable from the preferences dialog. This is
# tracked under rdar://problem/7365108 and rdar://problem/7365134
# in Apple's bug reporter.
nsterm-16color|AppKit Terminal.app v240.2+ with Mac OS X version 10.5:\
:NP:bw@:mi:\
:@7=\E[F:DC=\E[%dP:F1=\E[23~:F2=\E[24~:F3=\E[25~:\
:F4=\E[26~:F5=\E[28~:F6=\E[29~:F7=\E[31~:F8=\E[22~:\
:F9=\E[33~:FA=\E[34~:IC=\E[%d@:ch=\E[%i%dG:cv=\E[%i%dd:\
:dc=\E[P:ei=\E[4l:ic=\E[@:im=\E[4h:k5=\E[15~:k6=\E[17~:\
:k7=\E[18~:k8=\E[19~:k9=\E[20~:k;=\E[21~:kD=\E[3~:\
:kN=\E[6~:kP=\E[5~:kh=\E[H:te=\E[2J\E[?47l\E8:\
:ti=\E7\E[?47h:vb=\E[?5h\E[?5l:ve=\E[?25h:vi=\E[?25l:\
:tc=nsterm-c-s-acs:
# The versions of Terminal.app in Mac OS X version 10.3.x seem to have
# the background color erase bug. The newer version 240.2 in Mac OS X
# version 10.5 does not.
#
# This entry is based on newsgroup comments by Alain Bench, Christian Ebert,
# and D P Schreber comparing to nsterm-c-s-acs.
#
# In Mac OS X version 10.4 and earlier, D P Schreber notes that $TERM
# can be set in Terminal.app, e.g.,
#
# defaults write com.apple.Terminal TermCapString nsterm-bce
#
# and that it is not set in Terminal's preferences dialog.
nsterm-bce|AppKit Terminal.app v71+/v100.1.8+ with Mac OS X version 10.3/10.4 (bce):\
:bw:ut:tc=nsterm-16color:
# This is an alias which should always point to the "current" version
nsterm|Apple_Terminal|AppKit Terminal.app:\
:tc=nsterm-16color:
# iTerm.app from http://iterm.sourceforge.net/ is an alternative (and
# more featureful) terminal emulator for Mac OS X. It is similar
# enough in capabilities to nsterm-16color that I have derived this
# description from that one, but as far as I know they share no code.
# Many of the features are user-configurable, but I attempt only to
# describe the default configuration.
#
# NOTE: When tack tests (csr) + (nel) iTerm.app crashes, so (csr) is
# disabled.
iTerm.app|iTerm.app terminal emulator for Mac OS X:\
:bw@:cc@:ut:\
:@7=\EOF:Ic@:cs@:kh=\EOH:tc=xterm+256color:\
:tc=nsterm-16color:
# xnuppc - Darwin PowerPC Console (a.k.a. "darwin")
#
# On PowerPC platforms, Apple's Darwin operating system uses a
# full-screen system console derived from a NetBSD framebuffer
# console. It is an ANSI-style terminal, and is not really VT-100
# compatible.
#
# Under Mac OS X, this is the system console driver used while in
# single-user mode [reachable by holding down Command-S during the
# boot process] and when logged in using console mode [reachable by
# typing ">console" at the graphical login prompt.]
#
# If you're looking for a description of the Terminal.app terminal
# emulator which runs under the Mac OS X Quartz windowing system (and
# other AppKit-supported windowing systems,) see the "nsterm"
# entry instead.
#
# NOTE: Under Mac OS X version 10.1, the default login window does not
# prompt for user name, instead requiring an icon to be selected from
# a list of known users. Since the special ">console" login is not in
# this list, you must make one of two changes in the Login Window
# panel of the Login section of System Prefs to make the special
# ">console" login accessible. The first option is to enable 'Show
# "Other User" in list for network users', which will add a special
# "Other..." icon to the graphical login panel. Selecting "Other..."
# will present the regular graphical login prompt. The second option
# is to change the 'Display Login Window as:' setting to 'Name and
# password entry fields', which replaces the login panel with a
# graphical login prompt.
#
# There are no function keys, at least not in Darwin 1.3.
#
# It has no mouse support.
#
# It has full ANSI color support, and color combines correctly with
# all three supported attributes: bold, inverse-video and underline.
# However, bold colored text is almost unreadable (bolding is
# accomplished using shifting and or-ing, and looks smeared) so bold
# has been excluded from the list of color-compatible attributes
# [using (ncv)]. The monochrome entry (-m) is useful if you use a
# monochrome monitor.
#
# There is one serious bug with this terminal emulation's color
# support: repositioning the cursor onto a cell with non-matching
# colors obliterates that cell's contents, replacing it with a blank
# and displaying a colored cursor in the "current" colors. There is
# no complete workaround at present [other than using the monochrome
# (-m) entries,] but removing the (msgr) capability seemed to help.
#
# The "standout" chosen was simple reverse-video, although a colorful
# standout might be more aesthetically pleasing. Similarly, the bold
# chosen is the terminal's own smeared bold, although a simple
# color-change might be more readable. The color-bold (-b) entries
# uses magenta colored text for bolding instead. The fancy color (-f
# and -f2) entries use color for bold, standout and underlined text
# (underlined text is still underlined, though.)
#
# Apparently the terminal emulator does support a VT-100-style
# alternate character set, but all the alternate character set
# positions have been left blank in the font. For this reason, no
# alternate character set capabilities have been included in this
# description. The console driver appears to be ASCII-only, so (enacs)
# has been excluded [although the VT-100 sequence does work.]
#
# The default Mac OS X and Darwin installation reports "vt100" as the
# terminal type, and exports no helpful environment variables. To fix
# this, change the "console" entry in /etc/ttys from "vt100" to
# "xnuppc-WxH", where W and H are the character dimensions of your
# console (see below.)
#
# The font used by the terminal emulator is apparently one originally
# drawn by Ka-Ping Yee, and uses 8x16-pixel characters. This
# file includes descriptions for the following geometries:
#
# Pixels Characters Entry Name (append -m for monochrome)
# -------------------------------------------------------------------
# 640x400 80x25 xnuppc-80x25
# 640x480 80x30 xnuppc-80x30
# 720x480 90x30 xnuppc-90x30
# 800x600 100x37 xnuppc-100x37
# 896x600 112x37 xnuppc-112x37
# 1024x640 128x40 xnuppc-128x40
# 1024x768 128x48 xnuppc-128x48
# 1152x768 144x48 xnuppc-144x48
# 1280x1024 160x64 xnuppc-160x64
# 1600x1024 200x64 xnuppc-200x64
# 1600x1200 200x75 xnuppc-200x75
# 2048x1536 256x96 xnuppc-256x96
#
# The basic "xnuppc" entry includes no size information, and the
# emulator includes no reporting capability, so you'll be at the mercy
# of the TTY device (which reports incorrectly on my hardware.) The
# color-bold entries do not include size information.
# The '+' entries are building blocks
xnuppc+basic|Darwin PowerPC Console basic capabilities:\
:am:mi:ut:xn:\
:it#8:\
:DO=\E[%dB:LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:\
:UP=\E[%dA:cb=\E[1K:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\
:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:do=\E[B:\
:ds=\E]2;\007:ho=\E[H:kb=\177:kd=\EOB:ke=\E[?1l\E>:\
:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=\E[D:md=\E[1m:\
:me=\E[m:mr=\E[7m:nd=\E[C:rc=\E8:\
:rs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:sc=\E7:se=\E[m:\
:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:ue=\E[m:up=\E[A:\
:us=\E[4m:tc=vt100+keypad:
xnuppc+c|Darwin PowerPC Console ANSI color support:\
:Co#8:NC#32:pa#64:\
:AB=\E[4%dm:AF=\E[3%dm:op=\E[37;40m:
xnuppc+b|Darwin PowerPC Console color-bold support:\
:NC#32:\
:md=\E[35m:tc=xnuppc+basic:
xnuppc+f|Darwin PowerPC Console fancy color support:\
:NC#35:\
:so=\E[33;44m:us=\E[36;4m:tc=xnuppc+b:
xnuppc+f2|Darwin PowerPC Console alternate fancy color support:\
:NC#35:\
:md=\E[33m:so=\E[31;47m:us=\E[34m:tc=xnuppc+basic:
# Building blocks for specific screen sizes
xnuppc+80x25|Darwin PowerPC Console 80x25 support (640x400 pixels):\
:co#80:li#25:
xnuppc+80x30|Darwin PowerPC Console 80x30 support (640x480 pixels):\
:co#80:li#30:
xnuppc+90x30|Darwin PowerPC Console 90x30 support (720x480 pixels):\
:co#90:li#30:
xnuppc+100x37|Darwin PowerPC Console 100x37 support (800x600 pixels):\
:co#100:li#37:
xnuppc+112x37|Darwin PowerPC Console 112x37 support (896x600 pixels):\
:co#112:li#37:
xnuppc+128x40|Darwin PowerPC Console 128x40 support (1024x640 pixels):\
:co#128:li#40:
xnuppc+128x48|Darwin PowerPC Console 128x48 support (1024x768 pixels):\
:co#128:li#48:
xnuppc+144x48|Darwin PowerPC Console 144x48 support (1152x768 pixels):\
:co#144:li#48:
xnuppc+160x64|Darwin PowerPC Console 160x64 support (1280x1024 pixels):\
:co#160:li#64:
xnuppc+200x64|Darwin PowerPC Console 200x64 support (1600x1024 pixels):\
:co#200:li#64:
xnuppc+200x75|Darwin PowerPC Console 200x75 support (1600x1200 pixels):\
:co#200:li#75:
xnuppc+256x96|Darwin PowerPC Console 256x96 support (2048x1536 pixels):\
:co#256:li#96:
# These are different combinations of the building blocks
xnuppc-m|darwin-m|Darwin PowerPC Console (monochrome):\
:tc=xnuppc+basic:
xnuppc|darwin|Darwin PowerPC Console (color):\
:tc=xnuppc+c:tc=xnuppc+basic:
xnuppc-m-b|darwin-m-b|Darwin PowerPC Console (monochrome w/color-bold):\
:tc=xnuppc+b:
xnuppc-b|darwin-b|Darwin PowerPC Console (color w/color-bold):\
:tc=xnuppc+b:tc=xnuppc+c:
xnuppc-m-f|darwin-m-f|Darwin PowerPC Console (fancy monochrome):\
:tc=xnuppc+f:
xnuppc-f|darwin-f|Darwin PowerPC Console (fancy color):\
:tc=xnuppc+f:tc=xnuppc+c:
xnuppc-m-f2|darwin-m-f2|Darwin PowerPC Console (alternate fancy monochrome):\
:tc=xnuppc+f2:
xnuppc-f2|darwin-f2|Darwin PowerPC Console (alternate fancy color):\
:tc=xnuppc+f2:tc=xnuppc+c:
# Combinations for specific screen sizes
xnuppc-80x25-m|darwin-80x25-m|Darwin PowerPC Console (monochrome) 80x25:\
:tc=xnuppc+80x25:tc=xnuppc+basic:
xnuppc-80x25|darwin-80x25|Darwin PowerPC Console (color) 80x25:\
:tc=xnuppc+c:tc=xnuppc+80x25:tc=xnuppc+basic:
xnuppc-80x30-m|darwin-80x30-m|Darwin PowerPC Console (monochrome) 80x30:\
:tc=xnuppc+80x30:tc=xnuppc+basic:
xnuppc-80x30|darwin-80x30|Darwin PowerPC Console (color) 80x30:\
:tc=xnuppc+c:tc=xnuppc+80x30:tc=xnuppc+basic:
xnuppc-90x30-m|darwin-90x30-m|Darwin PowerPC Console (monochrome) 90x30:\
:tc=xnuppc+90x30:tc=xnuppc+basic:
xnuppc-90x30|darwin-90x30|Darwin PowerPC Console (color) 90x30:\
:tc=xnuppc+c:tc=xnuppc+90x30:tc=xnuppc+basic:
xnuppc-100x37-m|darwin-100x37-m|Darwin PowerPC Console (monochrome) 100x37:\
:tc=xnuppc+100x37:tc=xnuppc+basic:
xnuppc-100x37|darwin-100x37|Darwin PowerPC Console (color) 100x37:\
:tc=xnuppc+c:tc=xnuppc+100x37:tc=xnuppc+basic:
xnuppc-112x37-m|darwin-112x37-m|Darwin PowerPC Console (monochrome) 112x37:\
:tc=xnuppc+112x37:tc=xnuppc+basic:
xnuppc-112x37|darwin-112x37|Darwin PowerPC Console (color) 112x37:\
:tc=xnuppc+c:tc=xnuppc+112x37:tc=xnuppc+basic:
xnuppc-128x40-m|darwin-128x40-m|Darwin PowerPC Console (monochrome) 128x40:\
:tc=xnuppc+128x40:tc=xnuppc+basic:
xnuppc-128x40|darwin-128x40|Darwin PowerPC Console (color) 128x40:\
:tc=xnuppc+c:tc=xnuppc+128x40:tc=xnuppc+basic:
xnuppc-128x48-m|darwin-128x48-m|Darwin PowerPC Console (monochrome) 128x48:\
:tc=xnuppc+128x48:tc=xnuppc+basic:
xnuppc-128x48|darwin-128x48|Darwin PowerPC Console (color) 128x48:\
:tc=xnuppc+c:tc=xnuppc+128x48:tc=xnuppc+basic:
xnuppc-144x48-m|darwin-144x48-m|Darwin PowerPC Console (monochrome) 144x48:\
:tc=xnuppc+144x48:tc=xnuppc+basic:
xnuppc-144x48|darwin-144x48|Darwin PowerPC Console (color) 144x48:\
:tc=xnuppc+c:tc=xnuppc+144x48:tc=xnuppc+basic:
xnuppc-160x64-m|darwin-160x64-m|Darwin PowerPC Console (monochrome) 160x64:\
:tc=xnuppc+160x64:tc=xnuppc+basic:
xnuppc-160x64|darwin-160x64|Darwin PowerPC Console (color) 160x64:\
:tc=xnuppc+c:tc=xnuppc+160x64:tc=xnuppc+basic:
xnuppc-200x64-m|darwin-200x64-m|Darwin PowerPC Console (monochrome) 200x64:\
:tc=xnuppc+200x64:tc=xnuppc+basic:
xnuppc-200x64|darwin-200x64|Darwin PowerPC Console (color) 200x64:\
:tc=xnuppc+c:tc=xnuppc+200x64:tc=xnuppc+basic:
xnuppc-200x75-m|darwin-200x75-m|Darwin PowerPC Console (monochrome) 200x75:\
:tc=xnuppc+200x75:tc=xnuppc+basic:
xnuppc-200x75|darwin-200x75|Darwin PowerPC Console (color) 200x75:\
:tc=xnuppc+c:tc=xnuppc+200x75:tc=xnuppc+basic:
xnuppc-256x96-m|darwin-256x96-m|Darwin PowerPC Console (monochrome) 256x96:\
:tc=xnuppc+256x96:tc=xnuppc+basic:
xnuppc-256x96|darwin-256x96|Darwin PowerPC Console (color) 256x96:\
:tc=xnuppc+c:tc=xnuppc+256x96:tc=xnuppc+basic:
#### Radio Shack/Tandy
#
# (coco3: This had "ta" used incorrectly as a boolean and bl given as "bl#7".
# I read these as mistakes for ":it#8:" and ":bl=\007:" respectively -- esr)
# From: <{pbrown,ctl}@ocf.berkeley.edu> 12 Mar 90
coco3|os9LII|Tandy CoCo3 24*80 OS9 Level II:\
:am:bs:\
:co#80:it#8:li#24:\
:al=^_0:bl=^G:cd=^K:ce=^D:cl=5*\014:cm=2\002%r%+ %+ :\
:dl=^_1:do=^J:ho=^A:kd=^J:kl=^H:kr=^I:ku=^L:le=^H:mb=^_":\
:md=\E\072^A:me=\037!\E\072\200:mr=^_\040:nd=^F:se=^_!:\
:so=^_\040:ue=^_#:up=^I:us=^_":ve=^E!:vi=^E\040:
# (trs2: removed obsolete ":nl=^_:" -- esr)
trs2|trsII|trs80II|Radio Shack Model II using P&T CP/M:\
:am:bs:ms:\
:co#80:it#8:li#24:\
:al=^D:bl=^G:cd=^B:ce=^A:cl=^L:cm=\EY%+ %+ :cr=^M:dl=^K:\
:do=^_:ho=^F:kb=^H:kd=^_:kl=^\:kr=^]:ku=^^:le=^H:me=^O:nd=^]:\
:se=^O:sf=^J:so=^N:ta=^I:up=^^:
# From: Kevin Braunsdorf <ksb@mentor.cc.purdue.edu>
# (This had extension capabilities
# :BN=\E[?33h:BF=\E[?33l:UC=\E[_ q:BC=\E[\177 q:\
# :CN=\ERC:CF=\ERc:NR=\ERD:NM=\ER@:
# I also deleted the unnecessary ":kn#2:", ":sg#0:" -- esr)
trs16|trs-80 model 16 console:\
:am:bs:\
:co#80:it#8:li#24:\
:ac=jak`l_mbquvewcxs:ae=\ERg:al=\EL:as=\ERG:bl=^G:cd=\EJ:\
:ce=\EK:cl=^L:cm=\EY%+ %+ :cr=^M:dc=\EQ:dl=\EM:do=\EB:ei=:\
:ho=\EH:ic=\EP:im=:k0=^A:k1=^B:k2=^D:k3=^L:k4=^U:k5=^P:k6=^N:\
:k7=^S:kb=^H:kd=\EB:kh=^W:kl=\ED:kr=\EC:ku=\EA:l0=f1:l1=f2:\
:l2=f3:l3=f4:l4=f5:l5=f6:l6=f7:l7=f8:le=^H:me=\ER@:nd=\EC:\
:pf=\E]+:po=\E]=:se=\ER@:sf=^J:so=\ERD:ta=^I:up=\EA:ve=\ERC:\
:vi=\ERc:
#### Commodore Business Machines
#
# Formerly located in West Chester, PA; went spectacularly bust in 1994
# after years of shaky engineering and egregious mismanagement. Made one
# really nice machine (the Amiga) and boatloads of nasty ones (PET, C-64,
# C-128, VIC-20). The C-64 is said to have been the most popular machine
# ever (most units sold); they can still be found gathering dust in closets
# everywhere.
#
# From: Kent Polk <kent@swrinde.nde.swri.edu>, 30 May 90
# Added a few more entries, converted caret-type control sequence (^x) entries
# to '\0xx' entries since a couple of people mentioned losing '^x' sequences.
# Corrections by Ty Sarna <tsarna@endicor.com>, Sat Feb 28 18:55:15 1998
#
# :as:, :ae: Support for alternate character sets.
# :ve=\E[\040p:vi=\E[\060\040p: cursor visible/invisible.
# :xn: vt100 kludginess at column 80/NEWLINE ignore after 80 cols(Concept)
# This one appears to fix a problem I always had with a line ending
# at 'width+1' (I think) followed by a blank line in vi. The blank
# line tended to disappear and reappear depending on how the screen
# was refreshed. Note that this is probably needed only if you use
# something like a Dnet Fterm with the window sized to some peculiar
# dimension larger than 80 columns.
# :k0=\E9~: map F10 to k0 - could have F0-9 -> k0-9, but ... F10 was 'k;'
# (amiga: removed obsolete :kn#10:,
# also added empty <acsc> to suppress a warning --esr)
amiga|Amiga ANSI:\
:am:bs:bw:xn:\
:co#80:li#24:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
:LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:ac=:\
:ae=^O:al=\E[L:as=^N:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:\
:cl=\E[H\E[J:cm=\E[%i%d;%dH:dc=\E[P:dl=\E[M:do=\E[B:ei=:\
:ho=\E[H:ic=\E[@:im=:is=\E[20l:k0=\E[9~:k1=\E[0~:k2=\E[1~:\
:k3=\E[2~:k4=\E[3~:k5=\E[4~:k6=\E[5~:k7=\E[6~:k8=\E[7~:\
:k9=\E[8~:kb=^H:kd=\E[B:kl=\E[D:kr=\E[C:ku=\E[A:le=\E[D:\
:mb=\E[7;2m:md=\E[1m:me=\E[m:mh=\E[2m:mk=\E[8m:mr=\E[7m:\
:nd=\E[C:r1=\Ec:se=\E[m:sf=\E[S:so=\E[7m:sr=\E[T:ue=\E[m:\
:up=\E[A:us=\E[4m:ve=\E[ p:vi=\E[0 p:
# From: Hans Verkuil <hans@wyst.hobby.nl>, 4 Dec 1995
# (amiga: added empty <acsc> to suppress a warning.
# I'm told this entry screws up badly with AS225, the Amiga
# TCP/IP package once from Commodore, and now sold by InterWorks.--esr)
amiga-h|Hans Verkuil's Amiga ANSI:\
:bs:bw:ms:\
:co#80:li#24:\
:DC=\233%dP:DO=\233%dB:IC=\233%d@:LE=\233%dD:RI=\233%dC:\
:SF=\233%dS:SR=\233%dT:UP=\233%dA:ac=:ae=^O:as=^N:bl=^G:\
:bt=\233Z:cd=\233J:ce=\233K:cl=\233H\233J:\
:cm=\233%i%d;%dH:cr=^M:dc=\233P:do=\233B:ec=\233%dP:ei=:\
:ho=\233H:ic=\233@:im=:is=\23320l:k0=\2339~:k1=\2330~:\
:k2=\2331~:k3=\2332~:k4=\2333~:k5=\2334~:k6=\2335~:\
:k7=\2336~:k8=\2337~:k9=\2338~:kD=\177:kb=^H:kd=\233B:\
:kl=\233D:kr=\233C:ku=\233A:le=\233D:mb=\2337;2m:\
:md=\2331m:me=\2330m:mh=\2332m:mk=\2338m:mr=\2337m:\
:nd=\233C:nw=\233B\r:r1=\Ec:se=\2330m:sf=\233S:so=\2337m:\
:sr=\233T:ta=^I:te=\233?7h:ti=\233?7l:ue=\2330m:up=\233A:\
:us=\2334m:vb=^G:ve=\233 p:vi=\2330 p:
# From: Henning 'Faroul' Peters <Faroul@beyond.kn-bremen.de>, 25 Sep 1999
#
# Pavel Fedin added
# Home Shift+Left
# End Shift+Right
# PgUp Shift+Up
# PgDn Shift+Down
amiga-8bit|Amiga ANSI using 8-bit controls:\
:@7=\233 @:AL=\233%dL:DL=\233%dM:SF@:SR@:ac=:al=\233L:\
:dl=\233M:kN=\233S:kP=\233T:kh=\233 A:sf=\204:sr=\215:\
:tc=amiga-h:
# From: Ruediger Kuhlmann <terminfo@ruediger-kuhlmann.de>, 18 Jul 2000
# requires use of appropriate preferences settings.
amiga-vnc|Amiga using VNC console (black on light gray):\
:ND:am:da:db:ms:\
:BT#1:Co#16:NC#0:co#80:li#24:lm#0:pa#256:\
:%1=\E[?~:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:\
:IC=\E[%d@:Km=\E[M:LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:\
:SR=\E[%dT:UP=\E[%dA:al=\E[1L:bl=^G:cd=\E[J:ce=\E[K:\
:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:dc=\E[P:\
:dl=\E[1M:do=\E[B:ei=:ic=\E[@:im=:\
:is=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h:\
:k0=\E[9~:k1=\E[0~:k2=\E[1~:k3=\E[2~:k4=\E[3~:k5=\E[4~:\
:k6=\E[5~:k7=\E[6~:k8=\E[7~:k9=\E[8~:kB=\233Z:kD=\177:\
:kH=\E[45~:kN=\E[42~:kP=\E[41~:kb=^H:kd=\E[B:ke=\E[?1l:\
:kh=\E[44~:kl=\E[D:kr=\E[C:ks=\E[?1h:ku=\E[A:le=\E[D:\
:mb=\E[7;2m:md=\E[1m:me=\E[0m\017\E[30;85;>15m:mh=\E[2m:\
:mk=\E8m:mr=\E[7m:nd=\E[C:nw=\EE:oc=\E[0m:r1=\Ec:\
:r2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h:\
:se=\E[21m:sf=\ED:so=\E[1m:sr=\EM:te=\E[?7h\E[r\E[J:\
:ti=\E[?7h:ue=\E[24m:up=\E[A:us=\E[4m:vb=^G:\
:ve=\E[p\E[>?6l:vi=\E[0p:vs=\E[>?6h:
# MorphOS on Genesi Pegasos
# By Pavel Fedin <sonic_amiga@rambler.ru>
morphos:\
:@7=\23345~:AL=\233%dL:DL=\233%dM:F1=\23320~:F2=\23321~:\
:SF@:SR@:ac=:al=\233L:dl=\233M:kI=\23340~:kN=\23342~:\
:kP=\23341~:kh=\23344~:sf=\204:sr=\215:tc=amiga-h:
# Commodore B-128 microcomputer from Doug Tyrol <det@HEL-ACE.ARPA>
# I'm trying to write a termcap for a commodore b-128, and I'm
# having a little trouble. I've had to map most of my control characters
# to something that unix will accept (my delete-char is a ctrl-t, etc),
# and create some functions (like cm), but thats life.
# The problem is with the arrow keys - right, and up work fine, but
# left deletes the previous character and down I just can't figure out.
# Jove knows what I want, but I don't know what it's sending to me (it
# isn't thats bound to next-line in jove).
# Anybody got any ideas? Here's my termcap.
# DAG -- I changed his "^n" entries to "\n"; see if that works.
#
commodore|b-128|Commodore B-128 micro:\
:am:bw:\
:co#80:dN#20:li#24:pb#150:\
:al=10\Ei:bc=^H:ce=10\Eq:cl=10\E\006:cm=20\E\013%2,%2,:\
:cr=^M:dc=10*\177:dl=10*\Ed:do=^J:ei=:ho=\E^E:ic=5\E\n:im=:\
:kd=^J:kh=\E^E:kl=^B:kr=^F:ku=^P:nd=^F:nl=^M:ta=5\011:up=^P:
#### North Star
#
# North Star Advantage from Lt. Fickie <brl-ibd!fickie> via BRL
northstar|North Star Advantage:\
:bs:\
:co#80:li#24:\
:cd=200\017:ce=200\016:cl=200\004:cm=1\E=%+ %+ :\
:ho=200\034\032:
#### Osborne
#
# Thu Jul 7 03:55:16 1983
#
# As an aside, be careful; it may sound like an anomaly on the
# Osborne, but with the 80-column upgrade, it's too easy to
# enter lines >80 columns!
#
# I've already had several comments...
# The Osborne-1 with the 80-col option is capable of being
# 52, 80, or 104 characters wide; default to 80 for compatibility
# with most systems.
#
# The tab is destructive on the Ozzie; make sure to 'stty -tabs'.
osborne-w|osborne1-w|osborne I in 104-column mode:\
:ms:ul:xt:\
:co#104:li#24:\
:al=\EE:bl=^G:ce=\ET:cl=^Z:cm=\E=%+ %+ :cr=^M:dc=\EW:dl=\ER:\
:do=^J:ei=:ic=\EQ:im=:kd=^J:kl=^H:kr=^L:ku=^K:le=^H:nd=^L:\
:se=\E(:sf=^J:so=\E):ue=\Em:up=^K:us=\El:
# Osborne I from ptsfa!rhc (Robert Cohen) via BRL
osborne|osborne1|osborne I in 80-column mode:\
:am:bs:mi:ms:ul:xs:\
:co#80:dB#4:li#24:\
:al=\EE:ce=\ET:cl=^Z:cm=\E=%+ %+ :dc=4\EW:dl=\ER:do=^J:ei=:\
:im=\EQ:is=^Z:kb=^H:kd=^J:kl=^H:kr=^L:ku=^K:le=4\010:nd=^L:\
:se=\E):so=\E(:ue=\Em:up=^K:us=\El:
#
# Osborne Executive definition from BRL
# Similar to tvi920
# Added by David Milligan and Tom Smith (SMU)
osexec|Osborne executive:\
:am:bs:\
:co#80:li#24:sg#1:ug#1:\
:al=\EE:bl=^G:cd=\EY:ce=\ET:cl=^Z:cm=\E=%+ %+ :cr=^M:ct=\E3:\
:dc=\EW:dl=\ER:do=^J:ei=:ho=^^:ic=\EQ:im=:\
:is=\Eq\Ek\Em\EA\Ex0:k0=^A@\r:k1=^AA\r:k2=^AB\r:k3=^AC\r:\
:k4=^AD\r:k5=^AE\r:k6=^AF\r:k7=^AG\r:k8=^AH\r:k9=^AI\r:\
:kb=^H:kd=^J:kl=^H:kr=^L:ku=^K:le=^H:nd=^L:nl=^J:se=\Ek:\
:so=\Ej:st=\E1:ue=\Em:up=^K:us=\El:
#### Console types for obsolete UNIX clones
#
# Coherent, Minix, Venix, and several lesser-known kin were OSs for 8088
# machines that tried to emulate the UNIX look'n'feel. Coherent and Venix
# were commercial, Minix an educational tool sold in conjunction with a book.
# Memory-segmentation limits and a strong tendency to look like V7 long after
# it was obsolete made all three pretty lame. Venix croaked early. Coherent
# and Minix were ported to 32-bit Intel boxes, only to be run over by a
# steamroller named `Linux' (which, to be fair, traces some lineage to Minix).
# Coherent's vendor, the Mark Williams Company, went belly-up in 1994. There
# are also, I'm told, Minix ports that ran on Amiga and Atari machines and
# even as single processes under SunOS and the Macintosh OS.
#
# See
# http://www.minix3.org/manpages/man4/console.4.html
minix|minix console (v3):\
:@7=\E[Y:F1=\E[11;2~:F2=\E[12;2~:F3=\E[13;2~:F4=\E[14;2~:\
:F5=\E[15;2~:F6=\E[17;2~:F7=\E[18;2~:F8=\E[19;2~:\
:F9=\E[20;2~:FA=\E[21;2~:FB=\E[11;5~:FC=\E[12;5~:\
:FD=\E[13;5~:FE=\E[14;5~:FF=\E[15;5~:FG=\E[17;5~:\
:FH=\E[18;5~:FI=\E[19;5~:FJ=\E[20;5~:FK=\E[21;5~:\
:FL=\E[11;6~:FM=\E[12;6~:FN=\E[13;6~:FO=\E[14;6~:\
:FP=\E[15;6~:FQ=\E[17;6~:FR=\E[18;6~:FS=\E[19;6~:\
:FT=\E[20;6~:FU=\E[21;6~:\
:ac=+\020,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376:\
:k0=\E[21~:k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~:\
:k5=\E[15~:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:\
:k;=\E[21~:kD=\177:kI=\E[@:kN=\E[U:kP=\E[V:l0@:l1@:l2@:l3@:\
:l4@:l5@:tc=minix-3.0:
minix-3.0|minix console (v3.0):\
:tc=ecma+color:tc=minix-1.7:
# See
# http://www.minix-vmd.org/pub/Minix-vmd/1.7.0/wwwman/man4/console.4.html
# This is the entry provided with minix 1.7.4, with bogus :ri: removed.
minix-1.7|minix console (v1.7):\
:am:xn:\
:co#80:it#8:li#25:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:al=\E[L:bl=^G:cb=\E[2K:\
:cd=\E[0J:ce=\E[K:cl=\E[H\E[0J:cm=\E[%i%d;%dH:cr=^M:\
:dc=\E[P:dl=\E[M:do=\E[B:ei=:ho=\E[H:ic=\E[@:im=:is=\E[0m:\
:k0=\E[Y:k1=\E[V:k2=\E[U:k3=\E[T:k4=\E[S:k5=\E[G:kb=^H:\
:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:l0=End:l1=PgUp:\
:l2=PgDn:l3=Num +:l4=Num -:l5=Num 5:le=^H:mb=\E[5m:\
:md=\E[1m:me=\E[0m:mr=\E[7m:nd=\E[C:nw=^M^J:se=\E[0m:sf=^J:\
:so=\E[7m:sr=\EM:ta=^I:ue=\E[0m:up=\E[A:us=\E[4m:
# Corrected Jan 14, 1997 by Vincent Broman <broman@nosc.mil>
minix-old|minix-1.5|minix console (v1.5):\
:xo:\
:co#80:it#8:li#25:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:al=\E[L:bl=^G:cd=\E[0J:\
:ce=\E[K:cl=\E[H\E[0J:cm=\E[%i%d;%dH:cr=^M:dc=\E[P:\
:dl=\E[M:do=\E[B:ei=:ho=\E[H:ic=\E[@:im=:k0=\E[Y:k1=\E[V:\
:k2=\E[U:k3=\E[T:k4=\E[S:k5=\E[G:kb=^H:kd=\E[B:kh=\E[H:\
:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[0m:\
:mr=\E[7m:nd=\E[C:nw=^M^J:se=\E[0m:sf=^J:so=\E[7m:sr=\EM:\
:ta=^I:ue=\E[0m:up=\E[A:us=\E[4m:
# The linewrap option can be specified by editing /usr/include/minix/config.h
# before recompiling the minix 1.5 kernel.
minix-old-am|minix console with linewrap:\
:am:tc=minix-old:
pc-minix|minix console on an Intel box:\
:tc=klone+acs:tc=minix-3.0:
# According to the Coherent 2.3 manual, the PC console is similar
# to a z19. The differences seem to be (1) 25 lines, (2) no status
# line, (3) standout is broken, (4) ins/del line is broken, (5)
# has blinking and bold.
pc-coherent|pcz19|coherent|IBM PC console running Coherent:\
:am:mi:\
:co#80:it#8:li#25:\
:bl=^G:cd=\EJ:ce=\EK:cl=\EE:cm=\EY%+ %+ :cr=^M:dc=\EN:\
:do=\EB:ei=\EO:ho=\EH:im=\E@:kb=^H:kd=\EB:kh=\EH:kl=\ED:\
:kr=\EC:ku=\EA:le=^H:me=\Eq:nd=\EC:se=\Eq:sf=^J:so=\Ep:\
:sr=\EI:ta=^I:up=\EA:
# According to the Venix 1.1 manual, the PC console is similar
# to a DEC vt52. Differences seem to be (1) arrow keys send
# different strings, (2) enhanced standout, (3) added insert/delete line.
# Note in particular that it doesn't have automatic margins.
# There are other keys (f1-f10, kpp, knp, kcbt, kich1, kdch1) but they
# not described here because this derives from an old termcap entry.
pc-venix|venix|IBM PC console running Venix:\
:co#80:it#8:li#25:\
:al=\EL:bl=^G:cd=\EJ:ce=\EK:cl=\EH\EJ:cm=\EY%+ %+ :cr=^M:\
:dl=\EM:do=^J:kb=^H:kd=\EP:kh=\EG:kl=\EK:kr=\EM:ku=\EH:le=^H:\
:nd=\EC:sf=^J:sr=\EI:ta=^I:up=\EA:
#### Miscellaneous microcomputer consoles
#
# If you know anything more about any of these, please tell me.
#
# The MAI Basic Four computer was obsolete at the end of the 1980s.
# It may be used as a terminal by putting it in "line" mode as seen on
# one of the status lines.
# Initialization is similar to CIT80. :is: will set ANSI mode for you.
# Hardware tabs set by :if: at 8-spacing. Auto line wrap causes glitches so
# wrap mode is reset by :vs:. Using :sf:=\E[S caused errors so I
# used \ED instead.
# From: bf347@lafn.org (David Lawyer), 28 Jun 1997
mai|basic4|MAI Basic Four in ansi mode:\
:am:da:db:mi:ms:\
:co#82:it#8:li#25:\
:al=\E[L:bl=^G:cd=^_:ce=^^:cl=^]^_:cm=\E[%i%d;%dH:cr=^M:\
:cs=\E[%i%d;%dr:dc=\E[1P:dl=\E[M:do=^J:ei=\E[4l:ho=^]:\
:if=/usr/share/tabset/vt100:im=\E[4h:\
:is=\E>\E[?1h\E[?7h\E[?5l\017\E(B\E[m\E[20l\E[1;24r\E[24;1H:\
:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k5=\EOT:k6=\EOU:k7=\EOV:\
:k8=\EOW:kb=^H:kd=\EOB:kl=\EOD:kr=\EOC:ku=\EOA:le=^H:\
:mb=\E[5m:md=\E[1m:me=\E[m:mr=\E[7m:nd=^X:nw=^M\ED:rc=\E8:\
:sc=\E7:se=\E[m:sf=\ED:so=\E[7m:sr=\E[T:ta=^I:ue=\E[m:up=^Z:\
:us=\E[4m:ve=\E[?7h:vs=\E[?7l:
# basis from Peter Harrison, Computer Graphics Lab, San Francisco
# ucbvax!ucsfmis!harrison ...uucp / ucbvax!ucsfmis!harrison@BERKELEY ...ARPA
#
# On Sat, 7 Aug 1999, Torsten Jerzembeck <toje@nightingale.ms.sub.org> wrote:
# The Basis 108 was a Apple II clone, manufactured by the "Basis
# Mikrocomputer GmbH" in Munster, Germany (the company still exists today,
# about 1,5 km from where I live, but doesn't build own computers any
# more). A Basis 108 featured a really heavy (cast aluminium?) case, was
# equipped with one or two 5.25" disk drives, had a monochrome and colour
# video output for a TV set or a dedicated monitor and several slots for
# Apple II cards. Basis 108 were quite popular at german schools before
# the advent of the IBM PC. They run, for example, the UCSD Pascal
# development system (which I used even in 1993 to program the steering
# and data recording for our school's experimental solar panel :), Apple DOS
# or CP/M.
# (basis: removed obsolete ":ma=^K^P^R^L^L :nl=5000*^J:" -- esr)
basis|BASIS108 computer with terminal translation table active:\
:cd=\EY:ce=\ET:cl=300\E*:do=5000\n:kb=^H:kd=^J:kl=^H:kr=^L:\
:ku=^K:me=\E):se=\E):so=\E(:tc=adm3a:
# luna's BMC terminal emulator
luna|luna68k|LUNA68K Bitmap console:\
:co#88:li#46:tc=ansi-mini:
megatek|pegasus workstation terminal emulator:\
:am:os:\
:co#83:li#60:
# The Xerox 820 was a Z80 micro with a snazzy XEROX PARC-derived
# interface (pre-Macintosh by several years) that went nowhere.
xerox820|x820|Xerox 820:\
:am:\
:co#80:li#24:\
:bl=^G:cd=^Q:ce=^X:cl=1^Z:cm=\E=%+ %+ :cr=^M:do=^J:ho=^^:\
:le=^H:nd=^L:sf=^J:up=^K:
#### Videotex and teletext
#
# \E\:1} switch to te'le'informatique mode (ascii terminal/ISO 6429)
# \E[?3l 80 columns
# \E[?4l scrolling on
# \E[12h local echo off
# \Ec reset: G0 U.S. charset (to get #,@,{,},...), 80 cols, clear screen
# \E)0 G1 DEC set (line graphics)
#
# From: Igor Tamitegama <igor@ppp1493-ft.teaser.fr>, 18 Jan 1997
m2-nam|minitel|minitel-2|minitel-2-nam|France Telecom Minitel 2 mode te'le'informatique:\
:bs:es:hs:xn:\
:co#80:it#8:li#24:sg#0:ug#0:ws#72:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:\
:RI=\E[%dC:UP=\E[%dA:\
:ac=aaffggjjkkllmmnnooqqssttuuvvwwxx:ae=^O:al=\E[L:\
:as=^N:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:\
:cr=^M:cs=\E[%i%d;%dr:dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:\
:fs=^J:ho=\E[H:i1=\E\0721}\Ec\E[?4l\E[12h:\
:i2=\E[?3l kbs=\010:im=\E[4h:ip=7:is=\Ec\E[12h\E)0:\
:k0=\EOp:k1=\EOq:k2=\EOr:k3=\EOs:k4=\EOt:k5=\EOu:k6=\EOv:\
:k7=\EOw:k8=\EOx:k9=\EOy:k;=\EOp:kA=\E[4l:kC=\E[2J:kD=\E[P:\
:kI=\E[4h:kL=\E[M:kN=\EOn:kP=\EOR:kd=\E[B:kh=\E[H:kl=\E[D:\
:kr=\E[C:ku=\E[A:le=\E[D:ll=\E[24;80H:mb=\E[5m:md=\E[1m:\
:me=\E[m:mr=\E[7m:nd=\E[C:nw=^M^J:ps=\E[i:\
:r1=\Ec\E[?4l\E[12h:r2=\Ec\E)0:rc=\E8:sc=\E7:se=\E[27m:\
:sf=^J:so=\E[7m:sr=\EM:ta=^I:ts=^_@A:u6=\E[%i%d;%dR:\
:u7=\E[6n:ue=\E[24m:up=\E[A:us=\E[4m:vb=^G:ve=\E[<1l:\
:vi=\E[<1h:
# From: Alexandre Montaron <canal@mygale.org>, 18 Jun 1998
#
minitel1|minitel 1:\
:am:bw:es:hs:hz:ms:\
:Co#8:co#40:li#24:pa#8:\
:ac=+.,,./f0g1:bl=^G:ce=^X:cl=^L:cm=\037%+A%+A:cr=^M:do=^J:\
:eA=^Y:fs=^J:ho=^^:is=\E;`ZQ\E\072iC\E\072iE\021:le=^H:\
:mb=\EH:me=\EI\E\\:mr=\E]:nd=^I:nw=^M^J:op=\EG:\
:rp=%.\022%+?:se=\E\\:sf=^J:so=\E]:sr=^K:ts=\037@%+A:up=^K:\
:ve=^Q:vi=^T:
# is2=Fnct TE, Fnct MR, Fnct CM et pour finir: curseur ON.
minitel1b|minitel 1-bistandard (in 40cols mode):\
:mi:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:\
:RI=\E[%dC:UP=\E[%dA:al=\E[L:cb=\E[1K:cd=\E[J:dc=\E[P:\
:dl=\E[M:ei=\E[4l:i1=\E;iYA\E;jYC:im=\E[4h:kA=\E[L:\
:kC=\E[2J:kD=\E[P:kE=^X:kI=\E[4h:kL=\E[M:kd=\E[B:kh=\E[H:\
:kl=\E[D:kr=\E[C:ks=\E;iYA\E;jYC:kt=^I:ku=\E[A:\
:tc=minitel1:
# :ke: posait des problemes (logout en sortant de vi).
minitel1b-80|minitel 1-bistandard (standard teleinformatique):\
:am@:bw@:hz@:\
:Co@:co#80:it#8:pa@:\
:@8=\EOM:Sf@:ce=\E[K:cl=\E[H\E[2J:cm=\E[%i%d;%dH:ho=\E[H:\
:i1@:is@:k0=\EOp:k1=\EOq:k2=\EOr:k3=\EOs:k4=\EOt:k5=\EOu:\
:k6=\EOv:k7=\EOw:k8=\EOx:k9=\EOy:ke@:ks@:mb=\E[5m:md=\E[1m:\
:me=\E[m:mr=\E[7m:nd=\E[C:nw=\EE:op@:rc=\E8:rp@:sc=\E7:\
:se=\E[27m:sf=\ED:so=\E[7m:sr=\EM:ta=^I:ue=\E[24m:up=\E[A:\
:us=\E[4m:ve=\037@A\021\n:vi=\037@A\024\n:tc=minitel1b:
######## OBSOLETE VDT TYPES
#
# These terminals are *long* dead -- these entries are retained for
# historical interest only.
#### Amtek Business Machines
#
# (abm80: early versions of this entry apparently had ":se=\E^_:so=\E^Y",
# but these caps were commented out in 8.3; also, removed overridden
# ":do=^J:" -- esr)
abm80|amtek business machines 80:\
:am:bs:bw:\
:co#80:li#24:\
:al=\E^Z:bt=^T:cd=\E^X:ce=\E^O:cl=\E^\:cm=\E\021%r%+ %+ :\
:dl=\E^S:do=\E^K:ho=\E^R:le=^H:nd=^P:up=\E^L:
#### Bell Labs blit terminals
#
# These were AT&T's official entries. The 5620 FAQ maintained by
# David Breneman <daveb@dgtl.com> has this to say:
#
# Actually, in the beginning was the Jerq, and the Jerq was white with a
# green face, and Locanthi and Pike looked upon the Jerq and said the Jerq
# was good. But lo, upon the horizon loomed a mighty management-type person
# (known now only by the initials VP) who said, the mighty Jerq must stay
# alone, and could not go forth into the world. So Locanthi and Pike put the
# Jerq to sleep, cloned its parts, and the Blit was brought forth unto the
# world. And the Jerq lived the rest of its days in research, but never
# strayed from those paths.
#
# In all seriousness, the Blit was originally known as the Jerq, but when
# it started to be shown outside of the halls of the Bell Labs Research
# organization, the management powers that be decided that the name could
# not remain. So it was renamed to be Blit. This was in late 1981.
#
# (The AT&T 5620 was the commercialized Blit. Its successors were the 630,
# 730, and 730+.)
#
blit|jerq|blit running teletype rom:\
:am:eo:ul:xo:\
:co#87:it#8:li#72:\
:AL=\EF%+ :DC=\Ee%+ :DL=\EE%+ :IC=\Ef%+ :al=\EF!:bl=^G:\
:ce=\EK:cl=^L:cm=\EY%r%+ %+ :cr=^M:dc=\Ee!:dl=\EE!:do=^J:\
:ei=:ic=\Ef!:im=:k1=\Ex:k2=\Ey:k3=\Ez:kb=^H:kd=\EB:kl=\ED:\
:kr=\EC:ku=\EA:le=\ED:nd=\EC:sf=^J:ta=^I:up=\EA:
# (cbblit: here's a BSD termcap that says :do=\EG: -- esr)
cbblit|fixterm|blit running columbus code:\
:co#88:\
:cd=\EJ:ei=\ER:ic@:im=\EQ:pO=\EP%3:pf=^T:po=^R:se=\EV!:\
:so=\EU!:ue=\EV":us=\EU":vb=\E^G:tc=blit:
oblit|ojerq|first version of blit rom:\
:am:da:db:eo:mi:ul:xo:\
:co#88:it#8:li#72:\
:AL=\Ef%+ :DL=\Ee%+ :al=\EF:bl=^G:cd=\EJ:ce=\EK:cl=^L:\
:cm=\EY%r%+ %+ :cr=^M:dc=\EO:dl=\EE:do=^J:ei=\ER:im=\EQ:\
:kb=^H:le=\ED:nd=\EC:sf=^J:ta=^I:up=\EA:vb=\E^G:
#### Bolt, Beranek & Newman (bbn)
#
# The BitGraph was a product of the now-defunct BBN Computer Corporation.
# The parent company, best known as the architects of the Internet, is
# still around.
#
# Jeff DelPapa <dp@world.std.com> writes:
# The bitgraph was a large white box that contained a monochrome bitmap
# display, and a 68000 to run it. You could download code and run it on
# the cpu, it had 128kb (I think) of memory. I used one in the late
# 70's, sure beat a vt100. It had one strange feature tho -- it used
# the cpu to bitblt pixels to scroll, it took longer than the refresh
# rate, and looked like a rubber sheet stretching, then snapping
# upwards. It had everything the early mac had, except a floppy drive a
# small screen (it had a 17" crisp beauty) and a real OS. They (Bolt
# Beranek and Neuman) sold at most a few hundred of them to the real
# world. DOD may have bought more...
#
# Entries for the BitGraph terminals. The problem
# with scrolling in vi can only be fixed by getting BBN to put
# smarter scroll logic in the terminal or changing vi or padding
# scrolls with about 500 ms delay.
#
# I always thought the problem was related to the terminal
# counting newlines in its input buffer before scrolling and
# then moving the screen that much. Then vi comes along and
# paints lines in on the bottom line of the screen, so you get
# this big white gap.
bitgraph|bg2.0nv|bg3.10nv|bbn bitgraph 2.0 or later (normal video):\
:is=\E>\E[?5l\E[?7h:vb=\E[?5h\E[?5l:tc=bg2.0:
bg2.0rv|bg3.10rv|bbn bitgraph 2.0 (reverse video):\
:is=\E>\E[?5h\E[?7h:vb=\E[?5l\E[?5h:tc=bg2.0:
bg2.0|bg3.10|bbn bitgraph 2.0 or later (no init):\
:bs:xn:\
:co#85:li#64:\
:al=2*\E[L:bl=^G:cd=150\E[J:ce=2\E[K:cl=150\E[H\E[J:\
:cm=%i\E[%d;%dH:cr=^M:cs=\E[%i%d;%dr:dl=2*\E[M:do=\E[B:\
:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:kd=\E[B:ke=\E>:kl=\E[D:\
:kr=\E[C:ks=\E=:ku=\E[A:l1=PF1:l2=PF2:l3=PF3:l4=PF4:le=^H:\
:me=\E[m:nd=\E[C:rc=\E8:sc=\E7:se=\E[m:sf=280\n:so=\E[7m:\
:ta=^I:up=\E[A:
bg1.25rv|bbn bitgraph 1.25 (reverse video):\
:is=\E>\E[?5h\E[?7h:vb=\E[?5l\E[?5h:tc=bg1.25:
bg1.25nv|bbn bitgraph 1.25 (normal video):\
:is=\E>\E[?5l\E[?7h:vb=\E[?5h\E[?5l:tc=bg1.25:
# (bg1.25: I added <rmam>/<smam> based on the init string -- esr)
bg1.25|bbn bitgraph 1.25:\
:co#85:li#64:\
:RA=\E[?7l:SA=\E[?7h:al=2*\E[L:bl=^G:cd=150\E[J:ce=2\E[K:\
:cl=150\E[H\E[J:cm=%i\E[%d;%dH:cr=^M:dl=2*\E[M:do=\E[B:\
:k1=\EP:k2=\EQ:k3=\ER:k4=\ES:kd=\EB:ke=\E>:kl=\ED:kr=\EC:\
:ks=\E=:ku=\EA:l1=PF1:l2=PF2:l3=PF3:l4=PF4:le=^H:\
:ll=\E[64;1H:me=\E[m:nd=\E[C:se=\E[m:sf=280\n:so=\E[7m:\
:ta=^I:up=\E[A:
#### Bull (bq, dku, vip)
#
# (Adapted for terminfo; AIX extension capabilities translated -- esr)
#============================================#
# BULL QUESTAR 210 `SDP' terminals emulation #
#============================================#
#
# Description written by R.K.Saunders (Bull Transac)
#
# Modifications written by F. Girard (Bull MTS)
# 19-05-87 V02.00.01
# 17-12-87 V02.00.02
# 15-09-89 V02.00.05
#
# Typical technical selections F1 (modes SDP/ROLL):
# -------------------------------------------------------
# | 01 02 03 04 05 06 07 08 09 10 |
# | 1010 0011 1010 0110 0110 0001 0100 0000 0000 0000 |
# | |
# | 11 12 13 14 15 16 17 18 19 20 |
# | 0000 0110 100? 0000 0000 0000 0001 0000 0000 0001 |
# | |
# | 21 22 23 24 25 26 27 28 29 30 |
# | 0011 0000 0001 1000 0000 0000 0000 0000 0000 0000 |
# | |
# | 31 32 33 34 35 36 37 38 39 40 |
# | 1010 0011 0000 0000 0000 0000 0000 0000 0000 0000 |
# -------------------------------------------------------
# Typical firmware identification F5 "etat 6":
# P287.02.04b (AZERTY)
# P297.11.04 (24-pin: 2732) or P798.11.04 (28-pin: 2764)
# P298.03.03 (monochrome) or P374.03.02 (colour)
#
# SM SDP mode (VIP command): ^[[?=h
# RIS (erases screen): ^[c
# DMI disable keyboard: ^[`
# SM double rendition mode: ^[[?>h
# RM solicited status mode: ^[[5l
# RM character mode: ^[[>l
# RM echoplex mode: ^[[12l
# RM column tab mode: ^[[18l
# RM forbid SS2 keyboard mode: ^[[?<l
# SM scroll mode: ^[[=h
# FCF enable XON/XOFF: ^[P1s^[\
# MTL select end msg character: ^[[^Wp
# EMI enable keyboard: ^[b
# RIS retour etat initial: ^[c
# enable FC keypad: ^[[?<h,
# MPW map status line window: ^[PY99:98^[\
# SCP select status line: ^[[0;98v
# ED erase entire partition: ^[[2J
# SCP select main partition: ^[[v
# SM character insertion mode: ^[[4h
# RM character replacement mode: ^[[4l
# COO cursor on: ^[[r
# COO cursor off: ^[[1r
# SGR dim (turquoise) rev attr: ^[[2;7m
# SGR Data normal attr: ^[[m
# SO Line-graphic mode ON: ^N
# SI Line-graphic mode OFF: ^O
# MC start routing to printer: ^[[5i
# MC stop routing to printer: ^M^[[4i
#
# This entry covers the following terminals:
# dku7102, tws2102, and tws models 2105 to 2112
# (sgr removed to fit entry within 1023 bytes)
# (rmacs/smacs removed for consistency)
# (acsc removed to fit entry within 1023 bytes)
# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
tws-generic|dku7102|Bull Questar tws terminals:\
:am:es:hs:mi:ms:xn:xo:xs@:\
:co#80:it#8:li#24:ws#80:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:\
:RI=\E[%dC:UP=\E[%dA:al=\E[L:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:\
:cl=\E[2J:cm=\E[%i%d;%df:cr=^M:ct=\E[3g:dc=\E[P:dl=\E[M:\
:do=^J:ds=\EPY99\07298\E\\\E[0;98v\E[2J\E[v:ei=\E[4l:\
:fs=\E[v:ho=\E[H:i1=\E[?=h\Ec\E`\E[?>h\EPY99\07298\E\\:\
:i2=\Eb\E[?<h:im=\E[4h:\
:is=\E[5;>;12;18;?<l\E[=h\EP1s\E\\\E[\027p:\
:k1=\E[1u\027:k2=\E[2u\027:k3=\E[3u\027:k4=\E[4u\027:\
:k5=\E[5u\027:k6=\E[6u\027:k7=\E[7u\027:k8=\E[8u\027:\
:kD=\E[P:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:\
:le=^H:ll=\E[H\E[A:mb=\E[0;5m:me=\E[0m\017:mh=\E[0;2m:\
:mr=\E[0;7m:nd=\E[C:rs=\E[?=h\Ec:se=\E[m:sf=^J:so=\E[0;7m:\
:st=\EH:ta=\E[I:te=\E[0;98v\E[2J\E[v:\
:ti=\E[?>h\EPY99\07298\E\\:\
:ts=\EPY99\07298\E\\\E[0;98v\E[2;7m:ue=\E[m:up=\E[A:\
:us=\E[0;4m:ve=\E[r:vi=\E[1r:
tws2102-sna|dku7102-sna|BULL Questar tws2102 for SNA:\
:ds=\E[0;98v\E[2J\E[v:fs=\E[v:i2=\Eb:ts=\E[0;98v:\
:tc=tws-generic:
tws2103|xdku|BULL Questar tws2103:\
:ta=^I:tc=tws-generic:
tws2103-sna|dku7103-sna|BULL Questar tws2103 for SNA:\
:ta=^I:tc=tws2102-sna:
dku7102-old|BULL Questar 200 DKU7102 (microcode version < 6):\
:AL@:DL@:al@:ce=\E[K\E[m:cl=\E[2J\E[H:cm@:dl@:\
:ds=\EPY99\07298\E\\\E[0;98v\E[2J\E[H\E[v:\
:ts=\EPY99\07298\E\\\E[0;98v\E[H\E[2;7m:\
:tc=tws-generic:
dku7202|BULL Questar 200 DKU7202 (colour/character attributes):\
:i2=\E[?3h\Eb:mb=\E[0;2;4m:mh=\E[0;5m:so=\E[0;4;5;7m:\
:ta=^I:us=\E[0;2m:tc=tws-generic:
#=========================================================#
# BULL QUESTAR 303 & 310 `DEC VT 320' terminals emulation #
#=========================================================#
#
# Description written by J. Staerck (BULL SA)
# Copyright (c) 1989 BULL SA
#---------------------------------------------------------------------------
# This entry is used for terminals with vt320 emulation mode
# and following set-up :
# 8 bit ISO Latin Character Set (ISO 8859-1),
# 7 bit Control Characters,
# 80 columns screen.
# Hereafter are some DEC vt terminals' commands. (valid on vt200 and 300)
# They are used in string capabilities with vt220-320 emulation mode.
# In the following DEC definitions, two kinds of terminfo databases are
# provided :
# 1. the first with Command Sequence Introducer starting with escape
# sequence in 7 bits characters ex. ESC [ : 2 chars. in 7-bit mode.
# 2. the second with Command Sequence Introducer starting with escape
# sequence in 8 bits characters ex. ESC [ : 1 char. 'CSI' =x9B.
# Soft Terminal Reset esc [ ! p
# RIS (erases screen): esc c
# DECKPNM numeric keypad mode: esc >
# DECKPAM applic. keypad mode: esc =
# DECSTBM Scrolling region: esc [ r
# SCS select G0 = US: esc ( B
# SCS select G1 = line-graphic: esc ) 0
# Select 7-bit C1 controls: esc sp F
# Select 8-bit C1 controls: esc sp G
# Select cursor home: esc [ H
# Select erase screen: esc [ J
# SM KAM lock keyboard: esc [ 2 h
# RM KAM unlock keyboard: esc [ 2 l
# SM SRM local echo off: esc [ 1 2 h
# RM SRM local echo on: esc [ 1 2 l
# SM LNM New line : esc [ 2 0 h
# RM LNM return = CR only: esc [ 2 0 l
# SM DECCKM cursor keys mode: esc [ ? 1 h
# RM DECCKM appli. keys mode: esc [ ? 1 l
# SM DECANM ANSI mode on: esc [ ? 2 h
# RM DECANM ANSI mode off: esc [ ? 2 l
# SM DECCOLM 132-column screen: esc [ ? 3 h
# RM DECCOLM 80-column screen: esc [ ? 3 l
# SM DECSCLM Smooth scroll: esc [ ? 4 h
# RM DECSCLM Jump scroll: esc [ ? 4 l
# SM DECSCNM screen light backgr. esc [ ? 5 h
# RM DECSCNM screen dark backgr. esc [ ? 5 l
# SM DECOM move within margins: esc [ ? 6 h
# RM DECOM move outside margins: esc [ ? 6 l
# SM DECAWM auto right margin: esc [ ? 7 h
# RM DECAWM auto right margin: esc [ ? 7 l
# SM DECARM auto repeat: esc [ ? 8 h
# RM DECARM auto repeat: esc [ ? 8 l
# DECSASD Select active main: esc [ 0 $ }
# DECSASD Select active status: esc [ 1 $ }
# DECSSDT Select status none: esc [ 0 $ ~
# DECSSDT Select status indic.: esc [ 1 $ ~
# DECSSDT Select status host-wr: esc [ 2 $ ~
# SM DECTCEM Visible cursor: esc [ ? 2 5 h
# RM DECTCEM Invisible cursor: esc [ ? 2 5 l
# SM DECNCRM 7 bits NCR set: esc [ ? 4 2 h
# RM DECNCRM Multi or ISO latin: esc [ ? 4 2 l
# SM DECNKM numeric keypad mode: esc [ ? 6 6 h
# RM DECNKM numeric keypad appl.: esc [ ? 6 6 l
# SM DECKBUM clavier informatique esc [ ? 6 8 h
# RM DECKBUM clavier bureautique: esc [ ? 6 8 l
# DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 " p
# or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 0 " p
# or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 2 " p
# DECSCL vt300 mode 7-bit ctrl: esc [ 6 3 ; 1 " p
# Char. and Line attributes: esc [ Ps ... Ps m
# with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
# and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
#
# This entry covers BQ303, BQ306, BQ310, Q303, Q306, Q310
# (sgr removed to fit entry within 1023 bytes)
# (acsc removed to fit entry within 1023 bytes)
# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
bq300|Bull vt320 ISO Latin 1 80 columns terminal:\
:am:eo:es:hs:km:mi:ms:xn:xo:\
:co#80:it#8:li#24:vt#3:ws#80:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
:K1=\EOw:K2=\EOu:K3=\EOy:K4=\EOq:K5=\EOs:LE=\E[%dD:\
:RI=\E[%dC:UP=\E[%dA:ae=\E(B:al=\E[L:as=\E(0:bl=^G:cd=\E[J:\
:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
:ct=\E[3g:dc=\E[P:dl=\E[M:do=\E[B:\
:ds=\E[1$}\E[2$~\n\E[0$}:ec=\E[%dX:ei=\E[4l:fs=\E[0$}:\
:ho=\E[H:i1=\E[63;1"p\E[2h:\
:i2=\E[0$}\E[?25h\E[2l\E[H\E[J:im=\E[4h:\
:is=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l:\
:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k6=\E[17~:k7=\E[18~:\
:k8=\E[19~:k9=\E[20~:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:\
:kb=^H:kd=\E[B:ke=\E[?1l\E>:kl=\E[D:kr=\E[C:ku=\E[A:\
:le=\E[D:mb=\E[5m:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:nw=\EE:\
:rc=\E8:sc=\E7:se=\E[27m:sf=\ED:so=\E[7m:sr=\EM:st=\EH:\
:ta=^I:te=\E[?7h:ti=\E[?7l\E[?1l\E(B:ts=\E[1$}\E[2$~:\
:ue=\E[24m:up=\E[A:us=\E[4m:vb=\E[?5h\E[?5l:ve=\E[?25h:\
:vi=\E[?25l:
bq300-rv|Bull vt320 reverse 80 columns:\
:is=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l:\
:vb=\E[?5l\E[?5h:tc=bq300:
bq300-w|Bull vt320 132 columns:\
:co#132:ws#132:\
:is=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l:\
:rs=\E[?3h:tc=bq300:
bq300-w-rv|Bull vt320 reverse mode 132 columns:\
:co#132:ws#132:\
:is=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l:\
:rs=\E[?3h:vb=\E[?5l\E[?5h:tc=bq300:
# This entry is used for terminals with vt320 emulation mode
# and following set-up :
# 8 bit ISO Latin Character Set (ISO 8859-1),
# 8 bit Control Characters, (CSI coded as x9B for ESC [)
# 80 columns screen.
# Soft Terminal Reset csi ! p
# RIS (erases screen): esc c
# DECKPNM numeric keypad mode: esc >
# DECKPAM applic. keypad mode: esc =
# DECSTBM Scrolling region: esc [ r
# SCS select G0 = US: esc ( B
# SCS select G1 = line-graphic: esc ) 0
# Select 7-bit C1 controls: esc sp F
# Select 8-bit C1 controls: esc sp G
# Select cursor home: csi H
# Select erase screen: csi J
# SM KAM lock keyboard: csi 2 h
# RM KAM unlock keyboard: csi 2 l
# SM SRM local echo off: csi 1 2 h
# RM SRM local echo on: csi 1 2 l
# SM LNM New line : csi 2 0 h
# RM LNM return = CR only: csi 2 0 l
# SM DECCKM cursor keys mode: csi ? 1 h
# RM DECCKM appli. keys mode: csi ? 1 l
# SM DECANM ANSI mode on: csi ? 2 h
# RM DECANM ANSI mode off: csi ? 2 l
# SM DECCOLM 132-column screen: csi ? 3 h
# RM DECCOLM 80-column screen: csi ? 3 l
# SM DECSCLM Smooth scroll: csi ? 4 h
# RM DECSCLM Jump scroll: csi ? 4 l
# SM DECSCNM screen light backgr. csi ? 5 h
# RM DECSCNM screen dark backgr. csi ? 5 l
# SM DECOM move within margins: csi ? 6 h
# RM DECOM move outside margins: csi ? 6 l
# SM DECAWM auto right margin: csi ? 7 h
# RM DECAWM auto right margin: csi ? 7 l
# SM DECARM auto repeat: csi ? 8 h
# RM DECARM auto repeat: csi ? 8 l
# DECSASD Select active main: csi 0 $ }
# DECSASD Select active status: csi 1 $ }
# DECSSDT Select status none: csi 0 $ ~
# DECSSDT Select status indic.: csi 1 $ ~
# DECSSDT Select status host-wr: csi 2 $ ~
# SM DECTCEM Visible cursor: csi ? 2 5 h
# RM DECTCEM Invisible cursor: csi ? 2 5 l
# SM DECNCRM 7 bits NCR set: csi ? 4 2 h
# RM DECNCRM Multi or ISO latin: csi ? 4 2 l
# DECSCL vt300 mode 8-bit ctrl: csi 6 3 " p
# or DECSCL vt300 mode 8-bit ctrl: csi 6 3 ; 0 " p
# DECSCL vt300 mode 7-bit ctrl: csi 6 3 ; 1 " p
# Char. and Line attributes: csi Ps ... Ps m
# with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
# and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
# (bq300-8: :le:,:nd:,:up:,:do:,:dl:,:al: to get under 1024 --esr)
# (sgr removed to fit entry within 1023 bytes)
# (acsc removed to fit entry within 1023 bytes)
# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
# (some function-key capabilities suppressed to fit entry within 1023 bytes)
bq300-8|Bull vt320 full 8 bits 80 columns:\
:am:eo:es:hs:km:mi:ms:xn:xo:\
:co#80:it#8:li#24:vt#3:ws#80:\
:AL=\233%dL:DC=\233%dP:DL=\233%dM:DO=\233%dB:IC=\233%d@:\
:K1=\217w:K2=\217u:K3=\217y:K4=\217q:K5=\217s:LE=\233%dD:\
:RI=\233%dC:UP=\233%dA:ae=^O:as=^N:bl=^G:cd=\233J:ce=\233K:\
:cl=\233H\233J:cm=\233%i%d;%dH:cr=^M:cs=\233%i%d;%dr:\
:ct=\2333g:dc=\233P:do=\2331B:\
:ds=\2331$}\2332$~\n\2330$}:ec=\233%dX:ei=\2334l:\
:fs=\2330$}:ho=\233H:i1=\E[63;2"p\E[2h:\
:i2=\2330$}\233?25h\2332l\233H\233J:im=\2334h:\
:is=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l:\
:k1=\217P:k2=\217Q:k3=\217R:k4=\217S:kD=\2333~:kI=\2332~:\
:kN=\2336~:kP=\2335~:kb=^H:kd=\233B:ke=\233?1l\E>:\
:kl=\233D:kr=\233C:ku=\233A:le=\2331D:mb=\2335m:md=\2331m:\
:me=\2330m\E(B:mr=\2337m:nd=\2331C:nw=\EE:rc=\E8:sc=\E7:\
:se=\23327m:sf=\ED:so=\2337m:sr=\EM:st=\EH:ta=^I:\
:te=\233?7h:ti=\233?7l\233?1l\E(B:ts=\2331$}\2332$~:\
:ue=\23324m:up=\2331A:us=\2334m:vb=\233?5h\233?5l:\
:ve=\233?25h:vi=\233?25l:
bq300-8rv|Bull vt320 8-bit reverse mode 80 columns:\
:is=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l:\
:vb=\233?5l\233?5h:tc=bq300-8:
bq300-8w|Bull vt320 8-bit 132 columns:\
:co#132:ws#132:\
:is=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l:\
:rs=\233?3h:tc=bq300-8:
bq300-w-8rv|Bull vt320 8-bit reverse mode 132 columns:\
:co#132:ws#132:\
:is=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l:\
:rs=\233?3h:vb=\233?5l\233?5h:tc=bq300-8:
# This entry is used for terminals with vt320 emulation mode
# a 102 keys keyboard (PC scancode !) and following set-up :
# 8 bit ISO Latin Character Set (ISO 8859-1),
# 7 bit Control Characters,
# 80 columns screen.
bq300-pc|Questar 303 with PC keyboard ISO Latin 1 80 columns:\
:%0@:%1@:*6@:@0@:@7=\E[4~:F1=\E[29~:F2=\E[31~:F3@:F4@:F5@:F6@:\
:F7@:F8@:F9@:FA@:k1=\E[17~:k2=\E[18~:k3=\E[19~:k4=\E[20~:\
:k5=\E[21~:k6=\E[23~:k7=\E[24~:k8=\E[25~:k9=\E[26~:\
:k;=\E[28~:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=^H:\
:kh=\E[1~:l1@:l2@:l3@:l4@:tc=bq300:
bq300-pc-rv|Questar 303 with PC keyboard reverse mode 80 columns:\
:is=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l:\
:vb=\E[?5l\E[?5h:tc=bq300-pc:
bq300-pc-w|Questar 303 with PC keyboard 132 columns terminal:\
:co#132:ws#132:\
:is=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l:\
:rs=\E[?3h:tc=bq300-pc:
bq300-pc-w-rv|Questar 303 with PC keyboard reverse mode 132 columns:\
:co#132:ws#132:\
:is=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l:\
:rs=\E[?3h:vb=\E[?5l\E[?5h:tc=bq300-pc:
# 8 bit ISO Latin Character Set (ISO 8859-1),
# 8 bit Control Characters,
# 80 columns screen.
bq300-8-pc|Q306-8-pc|Questar 303 with PC keyboard in full 8 bits 80 columns:\
:%0@:%1@:*6@:@0@:@7=\2334~:F1=\23329~:F2=\23331~:F3@:F4@:F5@:\
:F6@:F7@:F8@:F9@:FA@:k1=\23317~:k2=\23318~:k3=\23319~:\
:k4=\23320~:k5=\23321~:k6=\23323~:k7=\23324~:k8=\23325~:\
:k9=\23326~:k;=\23328~:kD=\2333~:kI=\2332~:kN=\2336~:\
:kP=\2335~:kb=^H:kh=\2331~:l1@:l2@:l3@:l4@:tc=bq300-8:
bq300-8-pc-rv|Questar 303 with PC keyboard full 8 bits reverse mode 80 columns:\
:is=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l:\
:vb=\E[?5l\E[?5h:tc=bq300-8-pc:
bq300-8-pc-w|Questar 303 with PC keyboard full 8 bits 132 columns:\
:co#132:ws#132:\
:is=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l:\
:rs=\E[?3h:tc=bq300-8-pc:
bq300-8-pc-w-rv|Questar 303 with PC keyboard full 8 bits reverse 132 columns:\
:co#132:ws#132:\
:is=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l:\
:rs=\E[?3h:vb=\E[?5l\E[?5h:tc=bq300-8-pc:
#======================================================#
# BULL QUESTAR 310 `VIP 7800/8800' terminals emulation #
#======================================================#
# normal mode, 8 bits, 80 columns terminal.
# RES reset : ^[e
# RIS reset initial state: ^[c
# BLE bell enable ^[h
# BLD bell disable ^[g
# CAMS char. attr. mode set ^[[D
# CAMR char. attr. mode reset ^[[G
# CLR clear ^[`
# KBU keyboard unlock (set) ^[[W
# KBL keyboard lock (reset) ^[[X
# CM character mode (async.) ^[k
# NEP non echoplex mode (by host) ^[l
# EP echoplex mode (by host) ^[m
# IM insert mode set ^[[I
# IM insert mode reset ^[[J
# RMS roll mode set ^[r
# RMR roll mode reset ^[q
# SM78 set mode vip7800 ^[[1q
# SD scroll up (72 lines) ^[[0s
# SD scroll down (72 lines) ^[[1s
# RBM block mode reset ^[[E
# SLS status line set ^[w
# SLR status line reset ^[v
# SLL status line lock ^[O
# LGS Line-graphic mode set ^[G
# LGR Line-graphic mode reset ^[F
# TBC tab clear (at cursor pos.) ^[[g
# TBI tab initialize ^[[N
# TBS tab set (at cursor pos.) ^[p
# PDS print data space ^[[0p
# PHD print host data ^[[3p
# PDT print data terminator ^[[<p
# PRES print adapter reset ^[[2p
# SSPR multi-part. reset ^[[<>u
# SSP0 partition 0 set ^[[00u
# SSP1 partition n format 1 ^[[PnPnSTRINGu
# SSP2 partition n format 2 ^[[PnPnSTRINGu
# SSP3 partition n format 3 ^[[PnPnu
# ATR attribute (visual)
# blink : ^[sB
# dim : ^[sL
# hide (blank) : ^[sH
# restore : ^[sR
# inverse video : ^[sI
# prot. : ^[sP
# underline : ^[s_
# reset : ^{
#
# This covers the vip7800 and BQ3155-vip7800
# (rmacs/smacs removed for consistency)
# (acsc removed to fit entry within 1023 bytes)
vip|Bull Questar 3155-7800:\
:5i:am:es:hs:km:ms:xn:xo:\
:co#80:it#8:li#24:vt#3:ws#80:\
:#2=\EH:#4=\Eo:%i=\Eu:F1=\E\\:F2=\E\136:F3@:F4@:F5@:F6@:F7@:\
:F8@:F9@:FA@:FB=\E1:FC=\E5:FD=\E7:FE=\E9:FF=\E;:FG=\E=:FH=\E?:\
:FI=\EQ:FJ=\ES:FK=\EV:FL=\E]:FM=\E_:bl=^G:bt=\E[Z:cd=\EJ:\
:ce=\EK:cl=\E`:cm=\E[%i%3%3f:cr=^M:ct=\E[N:dc=\E[P:dl=\E[M:\
:do=^J:ds=\Ev:ei=\E[J:fs=\EO:ho=\EH:i2=\Er\E[W\E`:ic=\E[I:\
:im=\E[I:is=\E[00u\E[<>001001024080024080u\E[01u:\
:k1=\E0:k2=\E2:k3=\E6:k4=\E8:k5=\E\072:k6=\E<:k7=\E>:k8=\EP:\
:k9=\ER:k;=\ET:kA=\E[L:kB=\E[Z:kC=\E`:kD=\E[P:kE=\EK:\
:kF=\E[0s:kH=\EH\EA:kI=\E[I:kL=\E[M:kM=\E[J:kR=\E[1s:\
:kS=\EJ:kT=\Ep:ka=\E[N:kb=^H:kd=\EB:kh=\EH:kl=\ED:kr=\EC:\
:kt=\E[g:ku=\EA:l1=pf1:l2=pf2:l3=pf3:l4=pf4:le=^H:ll=\EH\EA:\
:mb=\EsB:me=\EsR\EsU\EF:mh=\EsL:mk=\EsH:mp=\EsP:mr=\EsI:\
:nd=\EC:nw=^M:pf=\E[<p:po=\E[3p:ps=\E[0p:r1=\Ec:r2=\E[G:\
:s0=\EF:s1=\EG:se=\EsR:sf=^J:so=\EsI:sr=10\EA\EJ\EH\E[L:\
:st=\Ep:ta=^I:ts=\Ew:ue=\EsR:up=\EA:us=\Es_:\
:vb=\007\007\007:
# normal screen, 8 bits, 132 columns terminal.
vip-w|vip7800-w|Q310-vip-w|Q310-vip-w-am|Questar 3155-vip7800 wide:\
:co#132:ws#132:\
:is=\E[00u\E[<>001001024132024132u\E[01u:tc=vip:
vip-H|vip7800-H|Q310-vip-H|Q310-vip-H-am|Questar 3155-vip7800 72 lines:\
:li#72:\
:is=\E[00u\E[<>001001024080072080u\E[01u:tc=vip:
vip-Hw|vip7800-Hw|Q310-vip-Hw|Questar 3155-vip7800 wide 72 lines:\
:co#132:li#72:ws#132:\
:is=\E[00u\E[<>001001024132072132u\E[01u:tc=vip:
#### Chromatics
#
# I have put the long strings in :ti:/:te:. Ti sets up a window
# that is smaller than the screen, and puts up a warning message
# outside the window. Te erases the warning message, puts the
# window back to be the whole screen, and puts the cursor at just
# below the small window. I defined :ve: and :vi: to really turn
# the cursor on and off, but I have taken this out since I don't
# like the cursor being turned off when vi exits.
cg7900|chromatics|chromatics 7900:\
:am:\
:co#80:li#40:\
:al=^A>2:bl=^G:cd=^Al:ce=^A`:cl=^L:cm=\001M%r%d,%d,:cr=^M:\
:dc=^A<1:dl=^A<2:do=^J:ei=:ho=^\:ic=^A>1:im=:le=^H:ll=^A|:\
:nd=^]:se=\001C1,\001c2,:sf=^J:so=\001C4,\001c7,:\
:te=\001W0,40,85,48,\014\001W0,0,85,48,\001M0,40,:\
:ti=\001P0\001O1\001R1\001C4,\001c0,\014\001M0,42,WARNING DOUBLE ENTER ESCAPE and \025\001C1,\001c2,\001W0,0,79,39,:\
:uc=\001\001_\001\200:up=^K:
#### Computer Automation
#
ca22851|computer automation 22851:\
:am:\
:co#80:li#24:\
:bl=^G:cd=^\:ce=^]:cl=8\014:cm=\002%i%.%.:cr=^M:do=^J:ho=^^:\
:kd=^W:kh=^^:kl=^U:ku=^V:le=^U:nd=^I:sf=^J:up=^V:
#### Cybernex
#
# This entry has correct padding and the undocumented "ri" capability
cyb83|xl83|cybernex xl-83:\
:am:bs:\
:co#80:li#24:\
:bl=^G:cd=62\020:ce=3\017:cl=62\014:cm=\027%+ %+ :cr=^M:\
:do=^J:ho=^K:kd=^J:kl=^H:kr=^I:ku=^N:le=^H:nd=^I:sf=^J:sr=^N:\
:up=^N:
# (mdl110: removed obsolete ":ma=^Z^P:" and overridden ":cd=145^NA^W:" -- esr)
cyb110|mdl110|cybernex mdl-110:\
:am:bs:\
:co#80:li#24:\
:al=65\016A\016\035:bl=^G:cd=6\016@\026:ce=145\016@\026:\
:cl=70\030:cm=\020%+ %+ :cr=^M:dc=3.5\016A\036:\
:dl=40\016A\016\036:do=^J:ei=:ho=^Y:ic=3.5\016A\035:im=:\
:le=^H:nd=^U:se=^NG:sf=^J:so=^NF:ta=43\011:up=^Z:
#### Datapoint
#
# Datapoint is gone. They used to be headquartered in Texas.
# They created ARCnet, an Ethernet competitor that flourished for a while
# in the early 1980s before 3COM got wise and cut its prices. The service
# side of Datapoint still lives (1995) in the form of Intelogic Trace.
#
dp3360|datapoint|datapoint 3360:\
:am:bs:\
:co#82:li#25:\
:bl=^G:cd=^_:ce=^^:cl=^]^_:cr=^M:do=^J:ho=^]:le=^H:nd=^X:\
:sf=^J:up=^Z:
# From: Jan Willem Stumpel <jw.stumpel@inter.nl.net>, 11 May 1997
# The Datapoint 8242 Workstation was sold at least between 1985
# and 1989. To make the terminal work with this entry, press
# CONTROL-INT-INT to take the terminal off-line, and type (opt).
# Set the options AUTO ROLL, ROLL DN, and ESC KBD on, and AUTO
# CR/LF off. Use control-shift-[] as escape key, control-I as tab,
# shift-F1 to shift-F5 as F6 to F10 (unshifted F1 to F5 are in
# fact unusable because the strings sent by the terminal conflict
# with other keys).
# The terminal is capable of displaying "box draw" characters.
# For each graphic character you must send 2 ESC's (\E\E) followed
# by a control character as follows:
# character meaning
# ========= =======
# ctrl-E top tee
# ctrl-F right tee
# ctrl-G bottom tee
# ctrl-H left tee
# ctrl-I cross
# ctrl-J top left corner
# ctrl-K top right corner
# ctrl-L bottom left corner
# ctrl-M bottom right corner
# ctrl-N horizontal line
# ctrl-O vertical line
# Unfortunately this cannot be fitted into the termcap/terminfo
# description scheme.
dp8242|datapoint 8242:\
:ms:\
:co#80:li#25:\
:al=\E^T:bl=^G:cd=^W:ce=^V:cl=\025\E\004\027\030:\
:cm=\011%r%+\\%+\\:cr=^M:dl=\E^Z:do=^J:ho=^U:\
:i1=\E\014\E\016\200\230\200\317\025\027\030\E\004:\
:k1=^G\Ee:k2=^I\Ed:k3=^J\Ec:k4=^J\Eb:k5=^S\Ea:k6=\EO\Ee:\
:k7=\EN\Ed:k8=\EM\Ec:k9=\EL\Eb:k;=\EK\Ea:kb=^H:kd=^B:kl=^D:\
:kr=^F:ku=^E:le=^H:nw=^M^J:\
:r1=\E\014\E\016\200\230\200\317\025\027\030\E\004:\
:rp=\E\023%.%.:se=\E^D:sf=^C:so=\E^E:sr=^K:ta=^I:ue=\E^D:\
:us=\E^F:ve=^X:vi=^Y:
#### DEC terminals (Obsolete types: DECwriter and vt40/42/50)
#
# These entries are DEC's official terminfos for its older terminals.
# Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
# Engineering for more information. Updated terminfos and termcaps
# are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
#
gt40|dec gt40:\
:bs:os:\
:co#72:li#30:\
:bl=^G:cr=^M:do=^J:le=^H:
gt42|dec gt42:\
:bs:os:\
:co#72:li#40:\
:bl=^G:cr=^M:do=^J:le=^H:
vt50|dec vt50:\
:bs:\
:co#80:li#12:\
:bl=^G:cd=\EJ:ce=\EK:cl=\EH\EJ:cr=^M:do=^J:le=^H:nd=\EC:\
:sf=^J:ta=^I:up=\EA:
vt50h|dec vt50h:\
:bs:\
:co#80:li#12:\
:bl=^G:cd=\EJ:ce=\EK:cl=\EH\EJ:cm=\EY%+ %+ :cr=^M:do=^J:\
:le=^H:nd=\EC:sf=^J:sr=\EI:ta=^I:up=\EA:
# (vt61: there's a BSD termcap that claims :dl=\EPd:, :al=\EPf.: :kb=^H:)
vt61|vt-61|vt61.5|dec vt61:\
:co#80:li#24:\
:bl=^G:cd=120\EJ:ce=70\EK:cl=120\EH\EJ:cm=20\EY%+ %+ :\
:cr=20\r:do=^J:kd=\EB:kl=\ED:kr=\EC:ku=\EA:le=^H:nd=20\EC:\
:sf=20\n:sr=\EI:ta=^I:up=20\EA:
# The gigi does standout with red!
# (gigi: I added <rmam>/<smam> based on the init string, corrected cub1 -- esr)
gigi|vk100|dec gigi graphics terminal:\
:am:bs:xn:\
:co#84:li#24:\
:DO=\E[%dB:LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:\
:UP=\E[%dA:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[2J:\
:cm=\E[%i%d;%dH:cr=^M:do=^J:\
:is=\E>\E[?3l\E[?4l\E[?5l\E[?20l\E[?7h\E[?8h:k1=\EOP:\
:k2=\EOQ:k3=\EOR:k4=\EOS:kd=\EOB:ke=\E[?1l\E>:kh=\E[H:\
:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:me=\E[m:\
:nd=\E[C:se=\E[m:sf=^J:so=\E[7;31m:sr=\EM:ta=^I:ue=\E[m:\
:up=\E[A:us=\E[4m:
# DEC PRO-350 console (VT220-style). The 350 was DEC's attempt to produce
# a PC differentiated from the IBM clones. It was a total, ludicrous,
# grossly-overpriced failure (among other things, DEC's OS didn't include
# a format program, so you had to buy pre-formatted floppies from DEC at
# a hefty premium!).
pro350|decpro|dec pro console:\
:bs:\
:co#80:it#8:li#24:\
:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
:ae=\EG:as=\EF:cd=\EJ:ce=\EK:cl=\EH\EJ:cm=\EY%+ %+ :do=\EB:\
:ho=\EH:k0=\EE:k1=\EF:k2=\EG:k3=\EH:k4=\EI:k5=\EJ:k6=\Ei:\
:k7=\Ej:kd=\EB:kh=\EH:kl=\ED:kr=\EC:ku=\EA:le=^H:nd=\EC:\
:se=\E^N:so=\E^H:sr=\EI:ta=^I:ue=\E^C:up=\EA:us=\E^D:
dw1|decwriter I:\
:bs:hc:os:\
:co#72:\
:bl=^G:cr=^M:do=^J:le=^H:sf=^J:
dw2|decwriter|dw|decwriter II:\
:bs:hc:os:\
:co#132:\
:bl=^G:cr=^M:do=^J:kb=^H:le=^H:sf=^J:
# \E(B Use U.S. character set (otherwise # => british pound !)
# \E[20l Disable "linefeed newline" mode (else puts \r after \n,\f,\v)
# \E[w 10 char/in pitch
# \E[1;132 full width horizontal margins
# \E[2g clear all tab stops
# \E[z 6 lines/in
# \E[66t 66 lines/page (for \f)
# \E[1;66r full vertical page can be printed
# \E[4g clear vertical tab stops
# \E> disable alternate keypad mode (so it transmits numbers!)
# \E[%i%p1%du set tab stop at column %d (origin == 1)
# (Full syntax is \E[n;n;n;n;n;...;nu where each 'n' is
# a tab stop)
#
# The dw3 does standout with wide characters.
#
dw3|la120|decwriter III:\
:bs:hc:os:\
:co#132:\
:bl=^G:cr=^M:do=^J:\
:i1=\E(B\E[20l\E[w\E[0;132s\E[2g\E[z\E[66t\E[1;66r\E[4g\E>:\
:is=\E[9;17;25;33;41;49;57;65;73;81;89;97;105;113;121;129u\r:\
:kb=^H:le=^H:me=\E[w:se=\E[w:sf=^J:so=\E[6w:ta=^I:
dw4|decwriter IV:\
:am:bs:hc:os:\
:co#132:\
:bl=^G:cr=^M:do=^J:is=\Ec:k0=\EOP:k1=\EOQ:k2=\EOR:k3=\EOS:\
:kb=^H:le=^H:sf=^J:ta=^I:
# These aren't official
ln03|dec ln03 laser printer:\
:hc:\
:co#80:li#66:\
:bl=^G:cr=^M:do=^J:hd=\EK:hu=\EL:me=\E[m:nw=^M^J:se=\E[22m:\
:sf=^J:so=\E[1m:ta=^I:ue=\E[24m:us=\E[4m:
ln03-w|dec ln03 laser printer 132 cols:\
:co#132:\
:bl=^G:cr=^M:do=^J:kb=^H:kd=^J:kl=^H:nw=^M^J:sf=^J:ta=^I:\
:tc=ln03:
#### Delta Data (dd)
#
# Untested. The cup sequence is hairy enough that it probably needs work.
# The idea is ctrl(O), dd(row), dd(col), where dd(x) is x - 2*(x%16) + '9'.
# There are BSD-derived termcap entries floating around for this puppy
# that are *certainly* wrong.
delta|dd5000|delta data 5000:\
:am:bs:\
:co#80:li#27:\
:bl=^G:ce=^NU:cl=^NR:cm=\017%+^P%+^P:dc=^NV:do=^J:ho=^NQ:\
:le=^H:nd=^Y:sf=^J:up=^Z:
#### Digital Data Research (ddr)
#
# (ddr: I added <rmam>/<smam> based on the init string -- esr)
ddr|rebus3180|ddr3180|Rebus/DDR 3180 vt100 emulator:\
:am:bs:xn:\
:co#80:it#8:li#24:vt#3:\
:RA=\E[7l:SA=\E[7l:cd=50\E[J:ce=3\E[K:cl=50\E[H\E[2J:\
:cm=5\E[%i%d;%dH:cs=\E[%i%d;%dr:do=^J:ho=\E[H:\
:is=\E[1;24r\E[24;1H:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:\
:kb=^H:kd=\E[B:ke=\E[?1l\E>:kl=\E[D:kr=\E[C:ks=\E[?1h\E=:\
:ku=\E[A:le=^H:mb=2\E[5m:md=2\E[1m:me=2\E[m:mr=2\E[7m:\
:nd=2\E[C:r1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:rc=\E8:\
:rf=/usr/share/tabset/vt100:sc=\E7:se=\E[m:sf=5\ED:\
:so=\E[7m:sr=5\EM:ta=^I:ue=2\E[m:up=2\E[A:us=2\E[4m:
#### Evans & Sutherland
#
# Jon Leech <leech@cs.unc.edu> tells us:
# The ps300 was the Evans & Sutherland Picture System 300, a high
# performance 3D vector graphics system with a bunch of specialized hardware.
# Approximate date of release was 1982 (early 80s, anyway), and it had several
# evolutions including (limited) color versions such as the PS330C. PS300s
# were effectively obsolete by the late 80s, replaced by raster graphics
# systems, although specialized applications like molecular modelling
# hung onto them for a while longer. AFAIK all E&S vector graphics systems
# are out of production, though of course E&S is very much alive (in 1996).
# (ps300: changed ":pt@:" to "it@" -- esr)
#
ps300|Picture System 300:\
:xt:\
:it@:\
:se@:so@:ue@:us@:tc=vt100:
#### General Electric (ge)
#
terminet1200|terminet300|tn1200|tn300|terminet|GE terminet 1200:\
:bs:hc:os:\
:co#120:\
:bl=^G:cr=^M:do=^J:sf=^J:
#### Heathkit/Zenith
#
# Here is a description of the H19 DIP switches:
#
# S401
# 0-3 = baud rate as follows:
#
# 3 2 1 0
# --- --- --- ---
# 0 0 1 1 300 baud
# 0 1 0 1 1200 baud
# 1 0 0 0 2400 baud
# 1 0 1 0 4800 baud
# 1 1 0 0 9600 baud
# 1 1 0 1 19.2K baud
#
# 4 = parity (0 = no parity)
# 5 = even parity (0 = odd parity)
# 6 = stick parity (0 = normal parity)
# 7 = full duplex (0 = half duplex)
#
# S402
# 0 = block cursor (0 = underscore cursor)
# 1 = no key click (0 = keyclick)
# 2 = wrap at end of line (0 = no wrap)
# 3 = auto LF on CR (0 = no LF on CR)
# 4 = auto CR on LF (0 = no CR on LF)
# 5 = ANSI mode (0 = VT52 mode)
# 6 = keypad shifted (0 = keypad unshifted)
# 7 = 50Hz refresh (1 = 60Hz refresh)
#
# Factory Default settings are as follows:
# 7 6 5 4 3 2 1 0
# S401 1 0 0 0 1 1 0 0
# S402 0 0 0 0 0 0 0 0
# (h19: I added <rmam>/<smam> based on the init string;
# also added empty <acsc> to suppress a tic warning -- esr)
h19-a|h19a|heath-ansi|heathkit-a|heathkit h19 ansi mode:\
:am:bs:mi:ms:\
:co#80:it#8:li#24:\
:RA=\E[?7l:SA=\E[?7h:ac=:ae=\E[11m:al=1*\E[1L:as=\E[10m:\
:bl=^G:cd=\E[J:ce=\E[K:cl=\E[2J:cm=\E[%i%d;%dH:cr=^M:\
:dc=\E[1P:dl=1*\E[1M:do=\E[1B:ei=\E[4l:ho=\E[H:im=\E[4h:\
:is=\E<\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m\E[?7h:k1=\EOS:\
:k2=\EOT:k3=\EOU:k4=\EOV:k5=\EOW:k6=\EOP:k7=\EOQ:k8=\EOR:\
:kb=^H:kd=\E[1B:kh=\E[H:kl=\E[1D:kr=\E[1C:ku=\E[1A:l6=blue:\
:l7=red:l8=white:le=^H:nd=\E[1C:se=\E[m:sf=^J:so=\E[7m:\
:sr=\EM:ta=^I:up=\E[1A:ve=\E[>4l:vs=\E[>4h:
h19-bs|heathkit w/keypad shifted:\
:ke=\Eu:ks=\Et:tc=h19-b:
h19-us|h19us|h19-smul|heathkit w/keypad shifted/underscore cursor:\
:ke=\Eu:ks=\Et:tc=h19-u:
# (h19: merged in :ip: from BSDI hp19-e entry>;
# also added empty <acsc> to suppress a tic warning --esr)
# From: Tim Pierce <twp@skepsis.com>, 23 Feb 1998
# Tim tells us that:
# I have an old Zenith-19 terminal at home that still gets a lot of use.
# This terminal suffers from the same famous insert-mode padding lossage
# that has been acknowledged for the Z29 terminal. Emacs is nearly
# unusable on this box, since even a half-scroll up or down the window
# causes flaming terminal death.
#
# On the Z19, the only way I have found around this problem is to remove
# the :al: and :dl: entries entirely. No amount of extra padding will
# help (I have tried up to 20000). Removing :al=\EL$: and :dl=\EM$:
# makes Emacs a little slower, but it remains in the land of the living.
# Big win.
h19|heath|h19-b|heathkit|heath-19|z19|zenith|heathkit h19:\
:am:bs:es:hs:mi:ms:\
:co#80:it#8:li#24:\
:ac=+h.kaiggjdkclfmenbozqas{tvutvuwsx`~\136:ae=\EG:\
:as=\EF:bl=^G:cd=\EJ:ce=\EK:cl=\EE:cm=\EY%+ %+ :cr=^M:\
:dc=\EN:do=\EB:ei=\EO:fs=\Ek\Ey5:ho=\EH:im=\E@:ip=.5<1.5/>:\
:k1=\ES:k2=\ET:k3=\EU:k4=\EV:k5=\EW:k6=\EP:k7=\EQ:k8=\ER:\
:kb=^H:kd=\EB:kh=\EH:kl=\ED:kr=\EC:ku=\EA:l6=blue:l7=red:\
:l8=white:le=^H:nd=\EC:se=\Eq:sf=^J:so=\Ep:sr=\EI:ta=^I:\
:ts=\Ej\Ex5\EY8%+ \Eo\Eo:up=\EA:ve=\Ey4:vs=\Ex4:
h19-u|heathkit with underscore cursor:\
:ve@:vs@:tc=h19-b:
h19-g|h19g|heathkit w/block cursor:\
:ve=\Ex4:vs@:tc=h19-b:
alto-h19|altoh19|altoheath|alto-heath|alto emulating heathkit h19:\
:li#60:\
:al=\EL:dl=\EM:tc=h19:
# The major problem with the Z29 is that it requires more padding than the Z19.
#
# The problem with declaring an H19 to be synonymous with a Z29 is that
# it needs more padding. It especially loses if a program attempts
# to put the Z29 into insert mode and insert text at 9600 baud. It
# even loses worse if the program attempts to insert tabs at 9600
# baud. Adding padding to text that is inserted loses because in
# order to make the Z29 not die, one must add so much padding that
# whenever the program tries to use insert mode, the effective
# rate is about 110 baud.
#
# What program would want to put the terminal into insert mode
# and shove stuff at it at 9600 baud you ask?
#
# Emacs. Emacs seems to want to do the mathematically optimal
# thing in doing a redisplay rather than the practical thing.
# When it is about to output a line on top of a line that is
# already on the screen, instead of just killing to the end of
# the line and outputting the new line, it compares the old line
# and the new line and if there are any similarities, it
# constructs the new line by deleting the text on the old line
# on the terminal that is already there and then inserting new
# text into the line to transform it into the new line that is
# to be displayed. The Z29 does not react kindly to this.
#
# But don't cry for too long.... There is a solution. You can make
# a termcap entry for the Z29 that says the Z29 has no insert mode.
# Then Emacs cannot use it. "Oh, no, but now inserting into a
# line will be really slow", you say. Well there is a sort of a
# solution to that too. There is an insert character option on
# the Z29 that will insert one character. Unfortunately, it
# involves putting the terminal into ansi mode, inserting the
# character, and changing it back to H19 mode. All this takes 12
# characters. Pretty expensive to insert one character, but it
# works. Either Emacs doesn't try to use its inserting hack when
# it's only given an insert character ability or the Z29 doesn't
# require padding with this (the former is probably more likely,
# but I haven't checked it out).
# (z29: added empty <acsc> to suppress a tic warning, merged in
# status line capabilities from BRL entry --esr)
z29|zenith29|z29b|zenith z29b:\
:am:bs:es:hs:mi:ms:pt:\
:co#80:kn#10:li#24:\
:ac=:ae=\EF:al=1\EL:as=\EG:bc=\ED:bl=^G:bt=\E-:cd=14\EJ:\
:ce=1\EK:cl=14\EE:cm=\EY%+ %+ :cr=^M:dc=0.1*\EN:dl=1\EM:\
:do=\EB:ds=\Ey1:ei=\EO:fs=\Ek\Ey5:ho=\EH:\
:ic=1\E<\E[1@\E[?2h:im=\E@:is=\E<\E[?2h\Ev:k0=\E~:k1=\ES:\
:k2=\ET:k3=\EU:k4=\EV:k5=\EW:k6=\EP:k7=\EQ:k8=\ER:k9=\E0I:\
:kb=^H:kd=\EB:kh=\EH:kl=\ED:kr=\EC:ku=\EA:l0=home:le=^H:\
:nd=\EC:se=\Eq:sf=2\n:so=\Ep:sr=2\EI:ta=^I:ue=\Es0:up=\EA:\
:us=\Es8:ve=\Ey4:vs=\Ex4:
# z29 in ansi mode. Assumes that the cursor is in the correct state, and that
# the world is stable. <rs1> causes the terminal to be reset to the state
# indicated by the name. kc -> key click, nkc -> no key click, uc -> underscore
# cursor, bc -> block cursor.
# From: Mike Meyers
# (z29a: replaced nonexistent :if=/usr/share/tabset/zenith29: befause :st:
# looks vt100-compatible -- esr)
z29a|z29a-kc-bc|h29a-kc-bc|heath/zenith 29 in ansi mode:\
:am:bs:es:hs:mi:ms:pt:\
:co#80:it#8:kn#10:li#24:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:\
:RI=\E[%dC:UP=\E[%dA:bc=\ED:bl=^G:cd=\E[J:ce=\E[K:cl=\E[2J:\
:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[1P:\
:do=^J:ds=\E[>1l:fs=\E[u\E[>5l:ho=\E[H:\
:if=/usr/share/tabset/vt100:k0=\E[~:k1=\EOS:k2=\EOT:\
:k3=\EOU:k4=\EOV:k5=\EOW:k6=\EOP:k7=\EOQ:k8=\EOR:k9=\EOX:\
:kC=\E[J:kS=\E[J:kb=^H:kd=\EOB:kh=\E[H:kl=\EOD:kr=\EOC:\
:ku=\EOA:l0=help:le=^H:mb=\E[5m:md=\E[2m:me=\E[m:mh=\E[2m:\
:mr=\E[7m:nd=\E[C:nw=^M\ED:ps=\E#7:\
:r1=\E<\E[1;24r\E[24;1H\E[?7h\E[>4h\E[>1;2;3;5;6;7;8;9l\E[m\E[11m:\
:rc=\E[r:sc=\E[s:se=\E[m:sf=\ED:so=\E[7;2m:sr=\EM:st=\EH:\
:ta=^I:te=\E[?7h:ti=\E[?7l:\
:ts=\E[s\E[>5;1h\E[25;%i%dH\E[1K:ue=\E[m:up=\E[A:\
:us=\E[4m:
z29a-kc-uc|h29a-kc-uc|z29 ansi mode with keyckick and underscore cursor:\
:r1=\E<\E[1;24r\E[24;1H\E[?7h\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m:\
:tc=z29a:
z29a-nkc-bc|h29a-nkc-bc|z29 ansi mode with block cursor and no keyclick:\
:r1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2;4h\E[>1;3;5;6;7;8;9l\E[m\E[11m:\
:tc=z29a:
z29a-nkc-uc|h29a-nkc-uc|z29 ansi mode with underscore cursor and no keyclick:\
:r1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2h\E[>1;3;4;5;6;7;8;9l\E[m\E[11m:\
:tc=z29a:
# From: Jeff Bartig <jeffb@dont.doit.wisc.edu> 31 Mar 1995
z39-a|z39a|zenith39-a|zenith39-ansi|Zenith 39 in ANSI mode:\
:5i:am:es:hs:mi:ms:xo:\
:co#80:li#24:\
:%1=\E[~:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:K1=\EOw:\
:K2=\EOy:K3=\EOu:K4=\EOq:K5=\EOs:LE=\E[%dD:RI=\E[%dC:\
:UP=\E[%dA:ac=0a``aaffggjjkkllmmnnooqqssttuuvvwwxx~~:\
:ae=\E(B:al=\E[1L:as=\E(0:bl=^G:bt=\E[1Z:cb=\E[1K:cd=\E[0J:\
:ce=\E[0K:cl=\E[2J\E[H:cm=\E[%i%d;%dH:cr=^M:\
:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[1P:dl=\E[1M:do=\E[B:\
:ds=\E[>1l:ei=\E[4l:fs=\E[u:ho=\E[H:im=\E[4h:\
:is=\E<\E[>1;3;5;6;7l\E[0m\E[2J:k1=\EOS:k2=\EOT:k3=\EOU:\
:k4=\EOV:k5=\EOW:k6=\EOP:k7=\EOQ:k8=\EOR:k9=\EOX:kS=\E[J:\
:kb=^H:kd=\E[B:ke=\E[>7l:kh=\E[H:kl=\E[D:kr=\E[C:ks=\E[>7h:\
:ku=\E[A:le=^H:ll=\E[24;1H:mb=\E[5m:md=\E[1m:me=\E[0m:\
:mh=\E[2m:mr=\E[7m:nd=\E[C:pf=\E[4i:po=\E[5i:\
:ps=\E[?19h\E[i:rc=\E[u:rs=\E<\Ec\200:sc=\E[s:se=\E[0m:\
:sf=^J:so=\E[7m:st=\EH:ta=^I:ts=\E[s\E[>1h\E[25;%i%dH:\
:ue=\E[0m:up=\E[A:us=\E[4m:ve=\E[>5l:vi=\E[>5h:
# From: Brad Brahms <Brahms@USC-ECLC>
z100|h100|z110|z-100|h-100|heath/zenith z-100 pc with color monitor:\
:ve=\Ey4\Em70:vs=\Ex4\Em71:tc=z100bw:
# (z100bw: removed obsolete ":kn#10:", added empty <acsc> -- esr)
z100bw|h100bw|z110bw|z-100bw|h-100bw|heath/zenith z-100 pc:\
:bs:mi:ms:pt:\
:co#80:it#8:kn#10:li#24:\
:ac=+h.kaiggjdkclfmenbozqas{tvutvuwsx`~\136:ae=\EG:\
:al=5*\EL:as=\EF:cd=\EJ:ce=\EK:cl=5*\EE:cm=1*\EY%+ %+ :\
:dc=1*\EN:dl=5*\EM:do=\EB:ei=\EO:ho=\EH:im=\E@:k0=\EJ:\
:k1=\ES:k2=\ET:k3=\EU:k4=\EV:k5=\EW:k6=\EP:k7=\EQ:k8=\ER:\
:k9=\EOI:kb=^H:kd=\EB:kh=\EH:kl=\ED:kr=\EC:ku=\EA:le=^H:\
:nd=\EC:se=\Eq:so=\Ep:sr=\EI:ta=^I:up=\EA:ve=\Ey4:vs=\Ex4:
p19|h19-b with il1/dl1:\
:al=2*\EL:dl=2*\EM:tc=h19-b:
# From: <ucscc!B.fiatlux@ucbvax.berkeley.edu>
# (ztx: removed duplicate :sr: -- esr)
ztx|ztx11|zt-1|htx11|ztx-1-a|ztx-10 or 11:\
:am:bs:es:hs:\
:co#80:it#8:li#24:\
:al=\EL:cd=\EJ:ce=\EK:cl=\EE:cm=\EY%+ %+ :dl=\EM:do=^J:\
:ds=\Ey1:fs=\Ek\Ey5:ho=\EH:\
:is=\Ej\EH\Eq\Ek\Ev\Ey1\Ey5\EG\Ey8\Ey9\Ey>:k0=\ES:\
:k1=\EB:k2=\EU:k3=\EV:k4=\EW:k5=\EP:k6=\EQ:k7=\ER:kb=^H:\
:kd=\EB:kl=\ED:kr=\EC:ku=\EA:le=^H:nd=\EC:se=\Eq:so=\Es5:\
:sr=\EI:ta=^I:ue=\Eq:up=\EA:us=\Es2:
#### IMS International (ims)
#
# There was a company called IMS International located in Carson City,
# Nevada, that flourished from the mid-70s to mid-80s. They made S-100
# bus/Z80 hardware and a line of terminals called Ultimas.
#
# From: Erik Fair <fair@ucbarpa.berkeley.edu> Sun Oct 27 07:21:05 1985
ims950-b|bare ims950 no init string:\
:is@:tc=ims950:
# (ims950: removed obsolete ":ko@:" -- esr)
ims950|ims televideo 950 emulation:\
:xn@:\
:k0@:k1@:k2@:k3@:k4@:k5@:k6@:k7@:k8@:k9@:kb@:kd@:kh@:kl@:kr@:ku@:vb@:\
:tc=tvi950:
# (ims950-rv: removed obsolete ":ko@:" -- esr)
ims950-rv|ims tvi950 rev video:\
:xn@:\
:k0@:k1@:k2@:k3@:k4@:k5@:k6@:k7@:k8@:k9@:kb@:kd@:kh@:kl@:kr@:ku@:vb@:\
:tc=tvi950-rv:
ims-ansi|ultima2|ultimaII|IMS Ultima II:\
:am:bs:\
:co#80:it#8:li#24:\
:cd=\E[0J:ce=\E[0K:cl=\E[H\E[2J:cm=\E[%i%2;%2H:do=\ED:\
:if=/usr/share/tabset/vt100:\
:is=\E[m\E[>14l\E[?1;?5;20l\E>\E[1m\r:kd=\E[B:kh=\E[H:\
:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:me=\E[m:nd=\EC:se=\E[m\E[1m:\
:so=\E[7m:sr=\EM:ta=^I:ue=\E[m\E[1m:up=\EM:us=\E[4m:
#### Intertec Data Systems
#
# I think this company is long dead as of 1995. They made an early CP/M
# micro called the "Intertec Superbrain" that was moderately popular,
# then sank out of sight.
#
superbrain|intertec superbrain:\
:am:bs:bw:\
:co#80:li#24:\
:bc=^U:bl=^G:cd=10*\E~k<10*>:ce=15\E~K:cl=5*\014:\
:cm=20\EY%+ %+ :cr=^M:do=^J:kd=^J:kl=^U:kr=^F:ku=^K:le=^H:\
:nd=^F:sf=^J:ta=^I:te=^L:ti=^L:up=^K:
# (intertube: a Gould entry via BRL asserted smul=\E0@$<200/>,
# rmul=\E0A$<200/>; my guess is the highlight letter is bit-coded like an ADM,
# and the reverse is actually true. Try it. -- esr)
intertube|intertec|Intertec InterTube:\
:am:bs:\
:co#80:li#25:\
:bl=^G:cl=^L:cm=50\EY%+ %+ :cr=^M:do=^J:ho=^A:le=^H:nd=^F:\
:se=\E0@:sf=^J:so=\E0P:up=^Z:
# The intertube 2 has the "full duplex" problem like the tek 4025: if you
# are typing and a command comes in, the keystrokes you type get interspersed
# with the command and it messes up
intertube2|intertec data systems intertube 2:\
:bs:\
:ce=\EK:ch=\020%B%.:cm=\016%.\020%B%.:cv=\013%.:\
:ll=^K^X\r:tc=intertube:
#### Ithaca Intersystems
#
# This company made S100-bus personal computers long ago in the pre-IBM-PC
# past. They used to be reachable at:
#
# Ithaca Intersystems
# 1650 Hanshaw Road
# Ithaca, New York 14850
#
# However, the outfit went bankrupt years ago.
#
# The Graphos III was a color graphics terminal from Ithaca Intersystems.
# These entries were written (originally in termcap syntax) by Brian Yandell
# <yandell@stat.wisc.edu> and Mike Meyer <mikem@stat.wisc.edu> at the
# University of Wisconsin.
# (graphos: removed obsolete and syntactically incorrect :kn=4:,
# removed :if=/usr/share/tabset/init.graphos: and
# <rf=/usr/share/tabset/init.graphos> no such file & no :st: -- esr)
graphos|graphos III:\
:am:mi:\
:co#80:it#8:li#24:\
:AL=\E[%dL:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:\
:UP=\E[%dA:al=\E[L:cd=\E[J:ce=\E[K:cl=\E[H\E[2J:\
:cm=\E[%i%d;%dH:cr=^M:dc=\E[P:dl=\E[M:dm=\E[4h:do=\E[B:\
:ed=\E[4l:ei=\E[4l:ho=\E[H:im=\E[4h:k1=\EOP:k2=\EOQ:\
:k3=\EOR:k4=\EOS:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:\
:ku=\E[A:le=^H:me=\E[m:nd=\E[C:nw=^M\ED:rc=\E8:sc=\E7:\
:se=\E[m:sf=\ED:so=\E[7m:sr=\EM:ta=^I:up=\E[A:\
:ve=\Ez56;2;0;0z\Ez73z\Ez4;1;1z:\
:vs=\Ez4;2;1z\Ez56;2;80;24z:
graphos-30|graphos III with 30 lines:\
:li#30:\
:vs=\Ez4;2;1z\Ez56;2;80;30z:tc=graphos:
#### Modgraph
#
# These people used to be reachable at:
#
# Modgraph, Inc
# 1393 Main Street,
# Waltham, MA 02154
# Vox: (617)-890-5796.
#
# However, if you call that number today you'll get an insurance company.
# I have mail from "Michael Berman, V.P. Sales, Modgraph" dated
# 26 Feb 1997 that says:
#
# Modgraph GX-1000, replaced by GX-2000. Both are out of production, have been
# for ~7 years. Modgraph still in business. Products are rugged laptop and
# portable PC's and specialized CRT and LCD monitors (rugged, rack-mount
# panel-mount etc). I can be emailed at sonfour@aol.com
#
# Peter D. Smith <pdsmith@nbbn.com> notes that his modgraph manual was
# dated 1984. According to the manual, it featured Tek 4010/4014
# graphics and DEC VT100/VT52 + ADM-3A emulation with a VT220-style keyboard.
#
modgraph|mod24|modgraph terminal emulating vt100:\
:xn@:\
:co#80:li#24:\
:is=\E\1369;0s\E\1367;1s\E[3g\E\13611;9s\E\13611;17s\E\13611;25s\E\13611;33s\E\13611;41s\E\13611;49s\E\13611;57s\E\13611;65s\E\13611;73s\E\13611;81s\E\13611;89s:\
:rf@:sr=5\EM\E[K:vs=\E\1369;0s\E\1367;1s:tc=vt100:
# The GX-1000 manual is dated 1984. This looks rather like a VT-52.
modgraph2|modgraph gx-1000 80x24 with keypad not enabled:\
:am:da:db:\
:co#80:it#8:li#24:\
:cd=50\EJ:ce=3\EK:cl=50\EH\EJ:cm=5\EY%+ %+ :do=2\EB:\
:is=\E<\E\1365;2s\E\1367;1s\E[3g\E\13611;9s\E\13611;17s\E\13611;25s\E\13611;33s\E\13611;41s\E\13611;49s\E\13611;57s\E\13611;65s\E\13611;73s\E\13611;81s\E\13611;89s\E\13612;0s\E\13614;2s\E\13615;9s\E\13625;1s\E\1369;1s\E\13627;1:\
:le=^H:nd=2\EC:sr=5\EI:ta=^I:up=2\EA:
#
# Modgraph from Nancy L. Cider <nancyc@brl-tbd>
# BUG NOTE from Barbara E. Ringers <barb@brl-tbd>:
# If we set TERM=vt100, and set the Modgraph screen to 24 lines, setting a
# mark and using delete-to-killbuffer work correctly. However, we would
# like normal mode of operation to be using a Modgraph with 48 line setting.
# If we set TERM=mod (which is a valid entry in termcap with 48 lines)
# the setting mark and delete-to-killbuffer results in the deletion of only
# the line the mark is set on.
# We've discovered that the delete-to-killbuffer works correctly
# with TERM=mod and screen set to 80x48 but it's not obvious. Only
# the first line disappears but a ctrl-l shows that it did work
# correctly.
modgraph48|mod|Modgraph w/48 lines:\
:am:bs:pt:xn:\
:co#80:it#8:li#48:vt#3:\
:bl=^G:cd=\E[J:ce=\E[K:cl=\E[;H\E[2J:cm=\E[%i%d;%dH:cr=^M:\
:cs=\E[%i%d;%dr:do=^J:ho=\E[H:\
:is=\E<\E[1;48r\E[0q\E[3;4q\E=\E[?1h:k1=\EOP:k2=\EOQ:\
:k3=\EOR:k4=\EOS:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:\
:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:mb=\E[5m:md=\E[1m:\
:me=\E[m:mr=\E[7m:nd=\E[C:nl=^J:r1=\E=\E[0q\E>:rc=\E8:\
:sc=\E7:se=\E[m:so=\E[7m:sr=\EM:ta=^I:ue=\E[m:up=\E[A:\
:us=\E[4m:vb=\E[?5h\E[0q\E[1;2q\E[?5l\E[0q\E[4;3q:
#### Morrow Designs
#
# This was George Morrow's company. They started in the late 1970s making
# S100-bus machines. They used to be reachable at:
#
# Morrow
# 600 McCormick St.
# San Leandro, CA 94577
#
# but they're long gone now (1995).
#
# The mt70 terminal was shipped with the Morrow MD-3 microcomputer.
# Jeff's specimen was dated June 1984.
# From: Jeff Wieland <wieland@acn.purdue.edu> 24 Feb 1995
mt70|mt-70|Morrow MD-70; native Morrow mode:\
:am:mi:ms:xo:\
:co#80:it#8:li#24:\
:%1=^AO\r:F1=^A`\r:F2=^Aa\r:F3=^Ab\r:F4=^Ac\r:F5=^Ad\r:\
:F6=^Ae\r:F7=^Af\r:F8=^Ag\r:F9=^Ah\r:FA=^Ai\r:\
:ac=+z,{-x.yOi`|jGkFlEmDnHqJtLuKvNwMxI:ae=\E%%:al=\EE:\
:as=\E$:bl=^G:bt=\EI:cd=\EY:ce=10\ET:cl=^Z:cm=1\E=%+ %+ :\
:cr=^M:ct=\E0:dc=\EW:dl=\ER:do=^J:ei=:ho=^^:i1=\E"2\EG0\E]:\
:ic=\EQ:im=:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:\
:k6=^AE\r:k7=^AF\r:k8=^AG\r:k9=^AH\r:k;=^AI\r:kB=^A^Z\r:\
:kC=^An\r:kD=\177:kb=^H:kd=^AK\r:kh=^AN\r:kl=^AL\r:\
:kr=^AM\r:ku=^AJ\r:le=^H:mh=\EG2:mk@:nd=^L:nw=^_:sf=^J:ta=^I:\
:te=:ti=\E"2\EG0\E]:up=^K:us=\EG1:vb=\EK1\EK0:ve=\E"2:\
:vi=\E"0:tc=adm+sgr:
#### Motorola
#
# Motorola EXORterm 155 from {decvax, ihnp4}!philabs!sbcs!megad!seth via BRL
# (Seth H Zirin)
ex155|Motorola Exorterm 155:\
:am:bs:bw:\
:co#80:kn#5:li#24:ug#1:\
:bt=\E[:cd=\ET:ce=\EU:cl=\EX:cm=\EE%+ %+ :do=\EB:ho=\E@:\
:kB=\E[:kC=\EX:kE=\EU:kS=\ET:kb=^H:kd=^J:kh=\E@:kl=^H:kr=^L:\
:ku=^K:le=\ED:nd=\EC:se=\Ec\ED:so=\Eb\ED:ta=\EZ:ue=\Eg\ED:\
:up=\EA:us=\Ef\ED:
#### Omron
#
# This company is still around in 1995, manufacturing point-of-sale systems.
omron|Omron 8025AG:\
:am:bs:da:db:\
:co#80:li#24:\
:al=\EL:bl=^G:cd=\ER:ce=\EK:cl=\EJ:cr=^M:dc=\EP:dl=\EM:do=^J:\
:ho=\EH:le=^H:nd=\EC:se=\E4:sf=\ES:so=\Ef:sr=\ET:up=\EA:\
:vs=\EN:
#### Ramtek
#
# Ramtek was a vendor of high-end graphics terminals around 1979-1983; they
# were competition for things like the Tektronics 4025.
#
# Ramtek 6221 from BRL, probably by Doug Gwyn
# The following SET-UP modes are assumed for normal operation:
# UNDERLINE_CURSOR ANSI_MODE AUTO_XON/XOFF_ON
# NEWLINE_OFF 80_COLUMNS
# Other SET-UP modes may be set for operator convenience or communication
# requirements; I recommend
# SMOOTH_SCROLL AUTO_REPEAT_ON 3_#_SHIFTED WRAP_AROUND_ON
# Hardware tabs are assumed to be every 8 columns; they can be set up by the
# "reset", "tset", or "tabs" utilities (use rt6221-w, 160 columns, for this).
# Note that the Control-E key is useless on this brain-damaged terminal. No
# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
rt6221|Ramtek 6221 80x24:\
:bs:ms:pt:xo:\
:co#80:it#8:kn#4:li#24:vt#3:\
:DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:ac=:ae=^O:as=^N:\
:bl=^G:cd=\E[J:ce=\E[K:cl=\E[1;1H\E[J:cm=\E[%i%d;%dH:\
:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:do=^K:ho=\E[1;1H:is=\E)0:\
:k0=\EOP:k1=\EOQ:k2=\EOR:k3=\EOS:kb=^H:kd=\E[B:ke=\E>:\
:kl=\E[D:kr=\E[C:ks=\E=:ku=\E[A:l0=PF1:l1=PF2:l2=PF3:l3=PF4:\
:le=^H:ll=\E[24;1H:mb=\E[5m:md=\E[1m:me=\E[m:mr=\E[7m:\
:nd=\E[C:nw=\EE:\
:r1=\E[1w\E[>37m\E[>39m\E[1v\E[20l\E[?3l\E[?6l\E[>5h\E[>6h\E[>7h\E[>8l\E[>9h\E[>10l\E[1;24r\E[m\E[q\E(B\017\E)0\E#5\E>:\
:rc=\E8:sc=\E7:se=\E[m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
:ue=\E[m:up=\EM:us=\E[4m:ve=\E[>5h\E[>9h:vi=\E[>5l:\
:vs=\E[>7h\E[>9l:
# [TO DO: Check out: short forms of ho/cl and ll; reset (\Ec)].
rt6221-w|Ramtek 6221 160x48:\
:co#160:li#48:\
:ll=\E[48;1H:tc=rt6221:
#### RCA
#
# RCA VP3301 or VP3501
rca|rca vp3301/vp3501:\
:bs:\
:co#40:li#24:\
:cl=^L:cm=\EY%+ %+ :ho=^Z:nd=^U:se=\E\ES0:so=\E\ES1:up=^K:
#### Selanar
#
# Selanar HiREZ-100 from BRL, probably by Doug Gwyn
# The following SET-UP modes are assumed for normal operation:
# SET_DEFAULT_TABS 48_LINES 80_COLUMNS
# ONLINE ANSI CURSOR_VISIBLE
# VT102_AUTO_WRAP_ON VT102_NEWLINE_OFF VT102_MONITOR_MODE_OFF
# LOCAL_ECHO_OFF US_CHAR_SET WPS_TERMINAL_DISABLED
# CPU_AUTO_XON/XOFF_ENABLED PRINT_FULL_SCREEN
# For use with graphics software, all graphics modes should be set to factory
# default. Other SET-UP modes may be set for operator convenience or
# communication requirements. No delays are specified; use "stty ixon -ixany"
# to enable DC3/DC1 flow control!
# I commented out the scrolling capabilities since they are too slow.
hirez100|Selanar HiREZ-100:\
:bs:mi:ms:pt:xo:\
:co#80:it#8:kn#4:li#48:vt#3:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:\
:RI=\E[%dC:UP=\E[%dA:ac=:ae=^O:al=\E[L:as=^N:bl=^G:cd=\E[J:\
:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:ct=\E[3g:\
:dc=\E[P:dl=\E[M:do=^J:ho=\E[H:is=\E<\E)0:k0=\EOP:k1=\EOQ:\
:k2=\EOR:k3=\EOS:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:\
:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:l0=PF1:l1=PF2:l2=PF3:l3=PF4:\
:le=^H:ll=\E[48H:mb=\E[5m:md=\E[1m:me=\E[m:mr=\E[7m:\
:nd=\E[C:nw=\EE:pf=\E[4i\E[?4i:po=\E[?5i\E[5i:ps=\E[i:\
:r1=\030\E2\E<\E[4i\E[?4i\E[12h\E[2;4;20l\E[?0;7h\E[?1;3;6;19l\E[r\E[m\E(B\017\E)0\E>:\
:rc=\E8:sc=\E7:se=\E[m:so=\E[7m:st=\EH:ta=^I:ue=\E[m:up=\EM:\
:us=\E[4m:
hirez100-w|Selanar HiREZ-100 in 132-column mode:\
:co#132:tc=hirez100:
#### Signetics
#
# From University of Wisconsin
vsc|Signetics Vsc Video driver by RMC:\
:am:ms:\
:co#80:it#8:li#26:\
:ce=\E[K:cl=50\E[;H\E[2J:cm=\E[%i%d;%dH:cr=^M:do=^J:\
:ho=\E[H:kb=^H:kd=^J:kl=^H:le=^H:me=^_!:mr=^_\040:nd=\E[C:\
:nw=^M^J:se=^_!:sf=^J:so=^_\040:ta=^I:ue=^_#:up=\E[A:us=^_":
#### Soroc
#
# Alan Frisbie <frisbie@flying-disk.com> writes:
#
# As you may recall, the Soroc logo consisted of their name,
# with the letter "S" superimposed over an odd design. This
# consisted of a circle with a slightly smaller 15 degree (approx.)
# wedge with rounded corners inside it. The color was sort of
# a metallic gold/yellow.
#
# If I had been more of a beer drinker it might have been obvious
# to me, but it took a clue from their service department to make
# me exclaim, "Of course!" The circular object was the top of
# a beer can (the old removable pop-top style) and "Soroc" was an
# anagram for "Coors".
#
# I can just imagine the founders of the company sitting around
# one evening, tossing back a few and trying to decide what to
# call their new company and what to use for a logo.
#
# (soroc120: removed obsolete ":ma=^K^P^R^L^L :" -- esr)
soroc120|iq120|soroc|soroc iq120:\
:cd=\EY:ce=\ET:cl=2\E*:do=^J:kd=^J:kl=^H:kr=^L:ku=^K:\
:tc=adm3a:
soroc140|iq140|soroc iq140:\
:am:bs:mi:\
:co#80:li#24:\
:al=1*\Ee:bl=^G:bt=\EI:cd=\Ey:ce=\Et:cl=\E+:cm=\E=%+ %+ :\
:cr=^M:dc=\Ew:dl=.7*\Er:do=^J:ei=\E8:ho=^^:im=\E9:k0=^A0\r:\
:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
:k7=^AF\r:k8=^AG\r:k9=^AH\r:kb=^H:kh=^^:kr=^L:ku=^K:le=^H:\
:ll=^^^K:nd=^L:se=\E\177:sf=^J:so=\E\177:ue=\E^A:up=^K:\
:us=\E^A:
#### Southwest Technical Products
#
# These guys made an early personal micro called the M6800.
# The ct82 was probably its console terminal.
#
# (swtp: removed obsolete ":bc=^D:" -- esr)
swtp|ct82|southwest technical products ct82:\
:am:\
:co#82:li#20:\
:al=^\^Y:bl=^G:cd=^V:ce=^F:cl=^L:cm=\013%r%.%.:cr=^M:\
:dc=^\^H:dl=^Z:do=^J:ei=:ho=^P:ic=^\^X:im=:\
:is=\034\022\036\023\036\004\035\027\011\023\036\035\036\017\035\027\022\011:\
:le=^D:ll=^C:nd=^S:se=^^^F:sf=^N:so=^^^V:sr=^O:up=^A:
#### Synertek
#
# Bob Manson <manson@pattyr.acs.ohio-state.edu> writes (28 Apr 1995):
#
# Synertek used to make ICs, various 6502-based single-board process
# control and hobbyist computers, and assorted peripherals including a
# series of small inexpensive terminals (I think they were one of the
# first to have a "terminal-on-a-keyboard", where the terminal itself
# was only slightly larger than the keyboard).
#
# They apparently had a KTM-1 model, which I've never seen. The KTM-2/40
# was a 40x24 terminal that could connect to a standard TV through a
# video modulator. The KTM-2/80 was the 80-column version (the 2/40
# could be upgraded to the 2/80 by adding 2 2114 SRAMs and a new ROM).
# I have a KTM-2/80 still in working order. The KTM-2s had fully
# socketed parts, used 2 6507s, a 6532 as keyboard scanner, a program
# ROM and 2 ROMs as character generators. They were incredibly simple,
# and I've never had any problems with mine (witness the fact that mine
# was made in 1981 and is still working great... I've blown the video
# output transistor a couple of times, but it's a 2N2222 :-)
#
# The KTM-3 (which is what is listed in the terminfo file) was their
# attempt at putting a KTM-2 in a box (and some models came with a
# CRT). It wasn't much different from the KTM-2 hardware-wise, but the
# control and escape sequences are very different. The KTM-3 was always
# real broken, at least according to the folks I've talked to about it.
#
# The padding in the entry is probably off--these terminals were very
# slow (it takes like 100ms for the KTM-2 to clear the screen...) And
# anyone with any sanity replaced the ROMs with something that provided
# a reasonable subset of VT100 functionality, since the usual ROMs were
# obviously very primitive... oh, you could get an upgraded ROM from
# Synertek for some incredible amount of money, but what hacker with an
# EPROM burner would do that? :)
#
# Sorry I don't have any contact info; I believe they were located in
# Sunnyvale, and I'm fairly sure they are still manufacturing ICs
# (they've gone to ASICs and FPGAs), but I doubt they're in the computer
# business these days.
#
# Tested, seems to work fine with vi.
synertek|ktm|synertek380|synertek ktm 3/80 tubeless terminal:\
:am:\
:co#80:li#24:\
:cd=\EJ:ce=\EK:cl=^Z:cm=\E=%+ %+ :le=^H:nd=^L:up=^K:
#### Tab Office Products
#
# TAB Products Co. - Palo Alto, California
# Electronic Office Products,
# 1451 California Avenue 94304
#
# I think they're out of business.
#
# The tab 132 uses xon/xoff, so no padding needed.
# :ks:/:ke: have nothing to do with arrow keys.
# :is: sets 80 col mode, normal video, autowrap on (for :am:).
# Seems to be no way to get rid of status line.
# The manual for this puppy was dated June 1981. It claims to be VT52-
# compatible but looks more vt100-like.
tab132|tab|tab132-15|tab 132/15:\
:da:db:\
:co#80:dN@:li#24:lm#96:\
:al=\E[L:cm=\E[%i%d;%dH:dc=\E[P:dl=\E[M:do=^J:ei=\E[4l:\
:im=\E[4h:is=\E[?7h\E[?3l\E[?5l:kd=\E[B:ke@:kl=\E[D:ks@:\
:ku=\E[A:tc=vt100:
tab132-w|tab132 in wide mode:\
:co#132:\
:is=\E[?7h\E[?3h\E[?5l:tc=tab132:
tab132-rv|tab132 in reverse-video mode:\
:is=\E[?7h\E[?3l\E[?5h:tc=tab132:
tab132-w-rv|tab132 in reverse-video/wide mode:\
:is=\E[?7h\E[?3h\E[?5h:tc=tab132-w:
#### Teleray
#
# Research Incorporated
# 6425 Flying Cloud Drive
# Eden Prairie, MN 55344
# Vox: (612)-941-3300
#
# The Teleray terminals were all discontinued in 1992-93. RI still services
# and repairs these beasts, but no longer manufactures them. The Teleray
# people believe that all the types listed below are very rare now (1995).
# There was a newer line of Telerays (Model 7, Model 20, Model 30, and
# Model 100) that were ANSI-compatible.
#
# Note two things called "teleray". Reorder should move the common one
# to the front if you have either. A dumb teleray with the cursor stuck
# on the bottom and no obvious model number is probably a 3700.
#
t3700|dumb teleray 3700:\
:bs:\
:co#80:li#24:\
:bl=^G:cl=^L:cr=^M:do=^J:le=^H:sf=^J:
t3800|teleray 3800 series:\
:bs:\
:co#80:it#8:li#24:\
:bl=^G:cd=\EJ:ce=\EK:cl=^L:cm=\EY%+ %+ :cr=^M:do=^J:ho=\EH:\
:le=^H:ll=\EY7\040:nd=\EC:sf=^J:ta=^I:up=^K:
t1061|teleray|teleray 1061:\
:am:bs:km:xs:xt:\
:co#80:it#8:li#24:sg#1:ug#1:\
:al=2*\EL:bl=^G:cd=1\EJ:ce=\EK:cl=1\014:cm=\EY%+ %+ :cr=^M:\
:ct=\EG:dc=\EQ:dl=2*\EM:do=^J:ei=:ho=\EH:ic=\EP:im=:ip=0.4*:\
:is=\Ee\EU01^Z1\EV\EU02^Z2\EV\EU03^Z3\EV\EU04^Z4\EV\EU05^Z5\EV\EU06^Z6\EV\EU07^Z7\EV\EU08^Z8\EV\Ef:\
:k1=^Z1:k2=^Z2:k3=^Z3:k4=^Z4:k5=^Z5:k6=^Z6:k7=^Z7:k8=^Z8:\
:le=^H:nd=\EC:se=\ER@:sf=^J:so=\040\ERD:st=\EF:ta=^I:\
:ue=\ER@:up=\EA:us=\ERH:
t1061f|teleray 1061 with fast PROMs:\
:al=\EL:dl=\EM:ip@:tc=t1061:
# "Teleray Arpa Special", officially designated as
# "Teleray Arpa network model 10" with "Special feature 720".
# This is the new (1981) fast microcode updating the older "arpa" proms
# (which gave meta-key and programmable-fxn keys). 720 is much much faster,
# converts the keypad to programmable function keys, and has other goodies.
# Standout mode is still broken (magic cookie, etc) so is suppressed as no
# programs handle such lossage properly.
# Note: this is NOT the old termcap's "t1061f with fast proms."
# From: J. Lepreau <lepreau@utah-cs> Tue Feb 1 06:39:37 1983, Univ of Utah
# (t10: removed overridden ":so@:se@:us@:ue@:" -- esr)
t10|teleray 10 special:\
:bs:km:xs:xt:\
:co#80:it#8:li#24:sg#2:ug#2:\
:al=\EL:cd=\EJ:ce=\EK:cl=30\Ej:cm=\EY%+ %+ :dc=\EQ:dl=\EM:\
:do=\EB:ei=:ho=\EH:ic=\EP:im=:le=^H:nd=\EC:pc=\200:se=\ER@:\
:sf=\Eq:so=\ERD:sr=\Ep:ta=^I:ue=\ER@:up=\EA:us=\ERH:
# teleray 16 - map the arrow keys for vi/rogue, shifted to up/down page, and
# back/forth words. Put the function keys (f1-f10) where they can be
# found, and turn off the other magic keys along the top row, except
# for line/local. Do the magic appropriate to make the page shifts work.
# Also toggle ^S/^Q for those of us who use Emacs.
t16|teleray 16:\
:am:da:db:mi:xs:xt:\
:co#80:li#24:\
:al=\E[L:bl=^G:cd=\E[0J:ce=\E[0K:cl=\E[H\E[2J:\
:cm=%i\E[%d;%df:cr=^M:dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:\
:ho=\E[H:im=\E[4h:k1=^Z1:k2=^Z2:k3=^Z3:k4=^Z4:k5=^Z5:k6=^Z6:\
:k7=^Z7:k8=^Z8:k9=^Z9:k;=^Z0:le=^H:me=\E[m:nd=\E[C:se=\E[m:\
:sf=^J:so=\E[7m:sr=\E[T:ta=^I:te=\E[V\E[24;1f\E[?38h:\
:ti=\E[U\E[?38l:ue=\E[m:up=\E[A:us=\E[4m:
#### Texas Instruments (ti)
#
# The Silent 700 was so called because it was built around a quiet thermal
# printer. It was portable, equipped with an acoustic coupler, and pretty
# neat for its day.
ti700|ti733|ti735|ti745|ti800|ti silent 700/733/735/745 or omni 800:\
:bs:hc:os:\
:co#80:\
:bl=^G:cr=162\r:do=^J:le=^H:sf=^J:
#
# Texas Instruments 916 VDT 7 bit control mode
#
ti916|ti916-220-7|Texas Instruments 916 VDT 8859/1 vt220 mode 7 bit CTRL:\
:da:db:in:ms:\
:%9=^X:@4=\E[29~:@8=^J:AL=36\E[%dL:DC=250\E[%dP:DL=\E[%dM:\
:DO=\E[%dB:F1=\E[29~:F2=\E[31~:IC=250\E[%d@:LE=\E[%dD:\
:RI=\E[%dC:UP=\E[%dA:ae=2\017:as=2\016:bt=\E[Z:cb=\E[1K:\
:cd=6\E[J:ce=\E[0K:ch=\E[%+^AG:cl=6\E[H\E[2J:\
:cm=\E[%i%d;%dH:ct=\E[3g:cv=\E[%+^Ad:dc=\E[P:eA=\E(B\E)0:\
:ec=20\E[%dX:ei=:ff=^L:im=:ip=10:is=\E[1;24r\E[24;1H:\
:k1=\E[17~:k2=\E[18~:k3=\E[19~:k4=\E[20~:k5=\E[21~:\
:k6=\E[23~:k7=\E[24~:k8=\E[25~:k9=\E[26~:k;=\E[28~:\
:kD=\E[P:kI=\E[@:kN=\E[S:kP=\E[T:kh=\E[H:mp=\E&:rs=\E[!p:\
:sa@:st=\E[0W:vb=6\E[?5h\E[?5l:ve=\E[?25h:vi=\E[?25l:\
:tc=vt220:
#
# Texas Instruments 916 VDT 8 bit control mode
#
ti916-8|ti916-220-8|Texas Instruments 916 VDT 8859/1 8 vt220 mode bit CTRL:\
:%9=^X:@4=\23329~:@8=^J:F1=\23329~:F2=\23331~:k1=\23317~:\
:k2=\23318~:k3=\23319~:k4=\23320~:k5=\23321~:k6=\23323~:\
:k7=\23324~:k8=\23325~:k9=\23326~:k;=\23328~:kD=\233P:\
:kI=\233@:kN=\233S:kP=\233T:kd=\233B:kh=\233H:kl=\233D:\
:kr=\233C:ku=\233A:tc=ti916:
#
# Texas Instruments 916 VDT 8859/1 7 bit control 132 column mode
#
ti916-132|Texas Instruments 916 VDT vt220 132 column:\
:co#132:tc=ti916:
#
# Texas Instruments 916 VDT 8859/1 8 bit control 132 column mode
#
ti916-8-132|Texas Instruments 916 VDT 8-bit vt220 132 column:\
:co#132:tc=ti916-8:
ti924|Texas Instruments 924 VDT 8859/1 7 bit CTRL:\
:am:bs:xo:\
:co#80:it#8:li#24:\
:al=\E[L:bl=^G:cd=\E[J:ce=\E[K:cl=\E[2J\E[H:\
:cm=%i\E[%d;%dH:cr=^M:cs=%i\E[%d;%dr:ct=\E[3g:dl=\E[M:\
:do=\E[B:ho=\E[H:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k5=\E[16~:\
:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:kD=\E[P:kI=\E[@:\
:kb=^H:kd=\E[B:kl=\E[D:kr=\E[C:ku=\E[A:le=\E[D:mb=\E[5m:\
:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:rc=\E8:sc=\E7:se=\E[m:\
:sf=\ED:so=\E[7m:sr=\EM:st=\EH:ta=^I:ue=\E[m:up=\E[A:\
:us=\E[4m:ve=\E[?25h:vi=\E[?25l:vs=\E[?31h:
ti924-8|Texas Instruments 924 VDT 8859/1 8 bit CTRL:\
:am:xo:\
:co#80:it#8:li#24:\
:al=\E[L:bl=^G:cd=\E[J:ce=\E[K:cl=\E[2J\E[H:\
:cm=%i\E[%d;%dH:cr=^M:cs=%i\E[%d;%dr:ct=\E[3g:dl=\E[M:\
:do=\E[B:ho=\E[H:k1=17P\217>:k2=17Q\217>:k3=17R\217>:\
:k4=17S\217>:k5=3316~\23316>:k6=3317~\23317>:\
:k7=3318~\23318>:k8=3319~\23319>:k9=3320~\23320>:\
:kD=33P\233>:kI=33@\233>:kb=^H:kd=\E[B:kl=\E[D:kr=\E[C:\
:ku=\E[A:le=\E[D:mb=\E[5m:md=\E[1m:me=\E[m:mr=\E[7m:\
:nd=\E[C:rc=\E8:sc=\E7:se=\E[m:sf=\ED:so=\E[7m:sr=\EM:\
:st=\EH:ta=^I:ue=\E[m:up=\E[A:us=\E[4m:ve=\E[?25h:\
:vi=\E[?25l:vs=\E[?31h:
ti924w|Texas Instruments 924 VDT 7 bit - 132 column mode:\
:co#132:tc=ti924:
ti924-8w|Texas Instruments 924 VDT 8 bit - 132 column mode:\
:co#132:tc=ti924-8:
ti931|Texas Instruments 931 VDT:\
:am:bs:xo:\
:co#80:li#24:\
:al=\EN:bl=^G:cd=\EJ:ce=\EI:cl=\EL:cm=\EY%+ %+ :cr=^M:\
:dc=\EQ:dl=\EO:do=\EB:ei=:ho=\EH:ic=\ER\EP\EM:im=:\
:is=\EGB\E(@B@@\E):k1=\Ei1:k2=\Ei2:k3=\Ei3:k4=\Ei4:\
:k5=\Ei5:k6=\Ei6:k7=\Ei7:k8=\Ei8:k9=\Ei9:kA=\EN:kD=\EQ:\
:kI=\EP:kL=\EO:kd=\EB:kl=\ED:kr=\EC:ku=\EA:le=\ED:mb=\E4P:\
:me=\E4@:mk=\E4H:mr=\E4B:nd=\EC:se=\E4@:sf=\Ea:so=\E4A:\
:sr=\Eb:ue=\E4@:up=\EA:us=\E4D:ve=\E4@:
ti926|Texas Instruments 926 VDT 8859/1 7 bit CTRL:\
:cs@:sf=\E[1S:sr=\E[1T:tc=ti924:
# (ti926-8: I corrected this from the broken SCO entry -- esr)
ti926-8|Texas Instruments 926 VDT 8859/1 8 bit CTRL:\
:cs@:sf=\2331S:sr=\2331T:tc=ti924-8:
ti_ansi|basic entry for ti928:\
:am:eo:ut:xn:xo:\
:Co#8:co#80:it#8:li#25:pa#64:\
:@7=\E[F:AB=\E[4%dm:AF=\E[3%dm:al=\E[L:bl=^G:bt=\E[Z:\
:cd=\E[J:ce=\E[K:cl=\E[2J\E[H:cm=\E[%i%d;%dH:cr=^M:\
:cs=\E[%i%d;%dr:dc=\E[P:dl=\E[M:do=\E[B:ei=:ho=\E[H:\
:ic=\E[@:im=:k0=\E[V:k1=\E[M:k2=\E[N:k3=\E[O:k4=\E[P:\
:k5=\E[Q:k6=\E[R:k7=\E[S:k8=\E[T:k9=\E[U:kN=\E[G:kP=\E[I:\
:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:\
:mb=\E[5m:md=\E[1m:me=\E[m:nd=\E[C:op=\E[37;40m:se=\E[m:\
:sf=\E[S:so=\E[7m:sr=\E[T:ta=^I:ue=\E[m:up=\E[A:us=\E[4m:
#
# 928 VDT 7 bit control mode
#
ti928|Texas Instruments 928 VDT 8859/1 7 bit CTRL:\
:%9=\E[35~:@7=\E_1\E\\:@8=\E[8~:F1=\E[29~:F2=\E[31~:\
:F3=\E[32~:F5=\E[34~:k1=\E[17~:k2=\E[18~:k3=\E[19~:\
:k4=\E[20~:k5=\E[21~:k6=\E[23~:k7=\E[24~:k8=\E[25~:\
:k9=\E[26~:k;=\E[28~:kD=\E[P:kI=\E[@:kN=\E[S:kP=\E[T:\
:tc=ti_ansi:
#
# 928 VDT 8 bit control mode
#
ti928-8|Texas Instruments 928 VDT 8859/1 8 bit CTRL:\
:%9=\23335~:@7=\2371\234:@8=\2338~:F1=\23329~:F2=\23331~:\
:F3=\23332~:F5=\23334~:k1=\23317~:k2=\23318~:k3=\23319~:\
:k4=\23320~:k5=\23321~:k6=\23323~:k7=\23324~:k8=\23325~:\
:k9=\23326~:k;=\23328~:kD=\233P:kI=\233@:kN=\233S:\
:kP=\233T:kh=\233H:tc=ti_ansi:
#### Zentec (zen)
#
# (zen30: removed obsolete :ma=^L ^R^L^K^P:. This entry originally
# had just :so:=\EG6 which I think means standout was supposed to be
# dim-reverse using ADM12-style attributes. ADM12 :us:/:ue: and
# <invis> might work-- esr)
zen30|z30|zentec 30:\
:am:bs:mi:ul:\
:co#80:li#24:\
:al=1.5*\EE:bl=^G:cd=\EY:ce=1.0*\ET:cl=\E*:cm=\E=%+ %+ :\
:cr=^M:dc=\EW:dl=1.5*\ER:do=^J:ei=\Er:ho=^^:im=\Eq:le=^H:\
:mh=\EG2:nd=^L:sf=^J:so=\EG6:ue@:up=^K:us@:tc=adm+sgr:
# (zen50: this had extension capabilities
# :BS=^U:CL=^V:CR=^B:
# UK/DK/RK/LK/HM were someone's aliases for ku/kd/kl/kr/kh,
# which were also in the original entry -- esr)
# (zen50: removed obsolete ":ma=^Hh^Ll^Jj^Kk:" -- esr)
zen50|z50|zentec zephyr:\
:am:bs:\
:co#80:li#24:sg#1:\
:al=\EE:cd=\EY:ce=\ET:cl=\E+:cm=\E=%+ %+ :dc=\EW:dl=\ER:ei=:\
:ic=\EQ:im=:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:le=^H:mk@:ue@:up=^K:\
:us@:tc=adm+sgr:
# CCI 4574 (Office Power) from Will Martin <wmartin@BRL.ARPA> via BRL
cci|cci1|z8001|zen8001|CCI Custom Zentec 8001:\
:am:bs:bw:\
:co#80:li#24:\
:cd=\EJ:ce=\EK:cl=\EH\EJ:cm=\EY%+ %+ :cs=\ER%+ %+ :do=^J:\
:ho=\EH:is=\EM \EF\ET\EP\ER 7:kb=^H:kd=\EB:kh=\EH:kl=\ED:\
:kr=\EC:ku=\EA:le=^H:mb=\EM":me=\EM\040:mh=\EM!:mk=\EM(:\
:mr=\EM$:nd=\EC:pf=^T:po=^R:se=\EM\040:so=\EM$:sr=\EI:\
:ue=\EM\040:up=\EA:us=\EM0:ve=\EP:vs=\EF\EQ\EM \ER 7:
######## OBSOLETE UNIX CONSOLES
#
#### Apollo consoles
#
# Apollo got bought by Hewlett-Packard. The Apollo workstations are
# labeled HP700s now.
#
# From: Gary Darland <goodmanc@garnet.berkeley.edu>
apollo|apollo console:\
:am:bs:mi:\
:co#88:li#53:\
:al=\EI:cd=\EJ:ce=\EK:ch=\EN%d:cl=^L:cm=\EM%+ %d):\
:cv=\EO+\040:dc=\EP:dl=\EL:do=\EB:ei=\ER:im=\EQ:le=^H:\
:nd=\EC:se=\ET:sf=\EE:so=\ES:sr=\ED:te=\EX:ti=\EW:ue=\EV:\
:up=\EA:us=\EU:
# We don't know whether or not the apollo guys replicated DEC's firmware bug
# in the VT132 that reversed :ei:/:im:. To be on the safe side, disable
# both these capabilities.
apollo_15P|apollo 15 inch display:\
:ei@:im@:tc=vt132:
apollo_19L|apollo 19 inch display:\
:ei@:im@:tc=vt132:
apollo_color|apollo color display:\
:ei@:im@:tc=vt132:
#### Convergent Technology
#
# Burroughs bought Convergent shortly before it merged with Univac.
# CTOS is (I believe) dead. Probably the aws is too (this entry dates
# from 1991 or earlier).
#
# Convergent AWS workstation from Gould/SEL UTX/32 via BRL
# (aws: removed unknown :dn=^K: -- esr)
aws|Convergent Technologies AWS workstation under UTX and Xenix:\
:am:\
:co#80:li#28:sg#0:ug#0:\
:ac=:ae=\EAAF:al=\EIL:as=\EAAN:bc=^H:cd=\EEF:ce=\EEL:\
:ch=\EH%.:cl=^L:cm=\EC%r%.%.:cv=\EV%.:dc=\EDC:dl=\EDL:\
:do=^K:ei=:ic=\EIC:im=:kb=^H:kd=^K:kl=^N:kr=^R:ku=^A:\
:ma=\016h\013j\001k\022l\002m:nd=^R:nl=^J:se=\EARF:\
:sf=\ESU:so=\EARN:sr=\ESD:ue=\EAUF:up=^A:us=\EAUN:
awsc|Convergent Technologies AWS workstation under CTOS:\
:am:\
:co#80:li#24:sg#0:ug#0:\
:ac=:ae=\EAAF:as=\EAAN:bc=^N:cd=\EEF:ce=\EEL:cl=^L:\
:cm=\EC%r%.%.:do=^K:kb=^H:kd=^K:kl=^N:kr=^R:ku=^A:\
:ma=\016h\013j\001k\022l\002m:nd=^R:se=\EAA:so=\EAE:\
:ue=\EAA:up=^A:us=\EAC:
#### DEC consoles
#
# The MicroVax console. Tim Theisen <tim@cs.wisc.edu> writes:
# The digital uVax II's had a graphic display called a qdss. It was
# supposed to be a high performance graphic accelerator, but it was
# late to market and barely appeared before faster dumb frame buffers
# appeared. I have only used this display while running X11. However,
# during bootup, it was in text mode, and probably had a terminal emulator
# within it. And that is what your termcap entry is for. In graphics
# mode the screen size is 1024x864 pixels.
qdss|qdcons|qdss glass tty:\
:am:bs:\
:co#128:li#57:\
:cl=1\032:cm=\E=%.%.:do=^J:le=^H:nd=^L:up=^K:
#### Fortune Systems consoles
#
# Fortune made a line of 68K-based UNIX boxes that were pretty nifty
# in their day; I (esr) used one myself for a year or so around 1984.
# They had no graphics, though, and couldn't compete against Suns and
# the like. R.I.P.
#
# From: Robert Nathanson <c160-3bp@Coral> via tut Wed Oct 5, 1983
# (This had extension capabilities
# :rv=\EH:re=\EI:rg=0:GG=0:\
# :CO=\E\\:WL=^Aa\r:WR=^Ab\r:CL=^Ac\r:CR=^Ad\r:DL=^Ae\r:RF=^Af\r:\
# :RC=^Ag\r:CW=^Ah\r:NU=^Aj\r:EN=^Ak\r:HM=^Al:PL=^Am\r:\
# :PU=^An\r:PD=^Ao\r:PR=^Ap\r:HP=^A@\r:RT=^Aq\r:TB=\r:CN=\177:MP=\E+F:
# It had both ":bs:" and ":bs=^H:"; I removed the latter. Also, it had
# ":sg=0:" and ":ug=0:"; evidently the composer was trying (unnecessarily)
# to force both magic cookie glitches off. Once upon a time, I
# used a Fortune myself, so I know the capabilities of the form ^A[a-z]\r are
# function keys; thus the "Al" value for HM was certainly an error. I renamed
# EN/PD/PU/CO/CF/RT according to the XENIX/TC mappings, but not HM/DL/RF/RC.
# I think :rv: and :re: are start/end reverse video and :rg: is a nonexistent
# "reverse-video-glitch" capability; I have put :rv: and :re: in with standard
# names below. I've removed obsolete ":nl=5^J:" as there is a :do: -- esr)
fos|fortune|Fortune system:\
:am:bs:bw:\
:co#80:li#25:\
:@7=^Ak\r:@8=^Aq:ac=j*k(l m"q&v%w#x-:ae=^O:al=15\034E:\
:as=\Eo:bl=^G:cd=3*\034Y:ce=^\Z:cl=20\014:cm=\034C%+ %+ :\
:cr=^M:dc=5\034W:dl=15\034R:do=3\n:ei=:ho=10\036:ic=5\034Q:\
:im=:is=^_..:k1=^Aa\r:k2=^Ab\r:k3=^Ac\r:k4=^Ad\r:k5=^Ae\r:\
:k6=^Af\r:k7=^Ag\r:k8=^Ah\r:kN=^Ao\r:kP=^An\r:kb=^H:\
:kd=^Ay\r:kh=^A?\r:kl=^Aw\r:kr=^Az\r:ku=^Ax\r:le=^H:mb=\EN:\
:me=\EI:mr=\EH:nw=^M^J:se=^\I`:sf=^J:so=^\H`:ta=^Z:ue=^\IP:\
:up=3\013:us=^\HP:ve=\E\\:vi=\E]:vs=\E\072:
#### Masscomp consoles
#
# Masscomp has gone out of business. Their product line was purchased by
# comany in Georgia (US) called "XS International", parts and service may
# still be available through them.
#
# (masscomp: ":MT:" changed to ":km:"; -- esr)
masscomp|masscomp workstation console:\
:bs:km:mi:\
:co#80:it#8:li#24:\
:al=\E[L:cd=\E[J:ce=\E[K:cl=\E[2J:cm=\E[%i%d;%dH:dc=\E[P:\
:dl=\E[M:do=\E[B:ei=\E[4l:im=\E[4h:is=\EGc\EGb\EGw:kb=^H:\
:kd=\EOB:kl=\EOD:kr=\EOC:ku=\EOA:le=^H:nd=\E[C:se=\E[m:\
:so=\E[7m:ta=^I:ue=\EGau:up=\E[A:us=\EGu:
masscomp1|masscomp large screen version 1:\
:co#104:li#36:tc=masscomp:
masscomp2|masscomp large screen version 2:\
:co#64:li#21:tc=masscomp:
######## OTHER OBSOLETE TYPES
#
# These terminals are *long* dead -- these entries are retained for
# historical interest only.
#
#### Obsolete non-ANSI software emulations
#
# CTRM terminal emulator
# 1. underlining is not allowed with colors: first, is is simulated by
# black on white, second, it disables background color manipulations.
# 2. BLINKING, REVERSE and BOLD are allowed with colors,
# so we have to save their status in the static registers A, B and H
# respectively, to be able to restore them when color changes
# (because any color change turns off ALL attributes)
# 3. :md: and :mr: sequences alternate modes,
# rather than simply entering them. Thus we have to check the
# static register B and H to determine the status, before sending the
# escape sequence.
# 4. :me: now must set the status of all 3 register (A,B,H) to zero
# and then reset colors
# 5. implementation of the protect mode would badly penalize the performance.
# we would have to use \E&bn sequence to turn off colors (as well as all
# other attributes), and keep the status of protect mode in yet another
# static variable. If someone really needs this mode, they would have to
# create another terminfo entry.
# 6. original color-pair is white on black.
# store the information about colors into static registers
# 7. set foreground color. it performs the following steps.
# 1) turn off all attributes
# 2) turn on the background and video attributes that have been turned
# on before (this information is stored in static registers X,Y,Z,A,B,H,D).
# 3) turn on foreground attributes
# 4) store information about foreground into U,V,W static registers
# 8. turn on background: similar to turn on foreground above
ctrm|C terminal emulator:\
:am:ut:xo:\
:Co#8:NC#2:Nl#0:co#80:lh#0:li#24:lm#0:lw#0:pa#63:pb#19200:vt#6:\
:al=\EL:bl=^G:bt=\Ei:cd=\EJ:ce=\EK:ch=\E&a%dC:cl=\EH\EJ:\
:cm=\E&a%r%dc%dY:cr=^M:ct=\E3:cv=\E&a%dY:dc=2\EP:dl=\EM:\
:do=^J:ei=\ER:im=\EQ:ip=2:is=\E&jA\r:k1=\Ep\r:k2=\Eq\r:\
:k3=\Er\r:k4=\Es\r:k5=\Et\r:k6=\Eu\r:k7=\Ev\r:k8=\Ew\r:\
:kb=^H:kd=\Ew\r:ke=\E&jA:kh=\Ep\r:kl=\Eu\r:kr=\Ev\r:\
:ks=\E&jB:ku=\Et\r:le=^H:mb=\E&dA%{1}%PA:\
:md=%?%gH%{0}%=%t\E&dH%{1}%PH%;:\
:me=\E&d@%{0}%PA%{0}%PB%{0}%PH:\
:mr=%?%gB%{0}%=%t\E&dB%{1}%PB%;:nd=\EC:\
:op=\E&bn\E&bB\E&bG\E&bR%{0}%PX%{0}%PY%{0}%PZ%{1}%PW%{1}%PV%{1}%PU:\
:sf=^J:so=\E&dD:st=\E1:ta=2\011:up=\EA:us=\E&dD:
# gs6300 - can't use blue foreground, it clashes with underline;
# it's simulated with cyan
# Bug: The <op> capability probably resets attributes.
# (gs6300: commented out <rmln> (no <smln>) --esr)
gs6300|emots|AT&T PC6300 with EMOTS terminal emulator:\
:am:ms:ut:xo:\
:Co#8:co#80:it#8:li#24:pa#63:\
:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
:LE=\E[%dD:RI=\E[%dC:Sb=\E[?;%dm:UP=\E[%dA:\
:ac=++,,--..``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
:ae=\E[10m:al=\E[L:as=\E[11m:bl=^G:cd=\E[J:ce=\E[K:\
:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:dc=\E[P:dl=\E[M:do=^J:\
:ei=:ho=\E[H:ic=\E[@:im=:is=\E[m:k1=\E[0s:k2=\E[24s:\
:k3=\E[1s:k4=\E[23s:k5=\E[2s:k6=\E[22s:k7=\E[3s:k8=\E[21s:\
:kB=^R^I:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:\
:le=^H:mb=\E[5m:md=\E[1m:me=\E[m\E[10m:mr=\E[7m:nd=\E[C:\
:op=\E[?;m:pf=\E[4i:po=\E[5i:r1=\Ec:sf=^J:so=\E[1m:sr=\E[L:\
:ta=^I:up=\E[A:us=\E[4m:
# From: <earle@smeagol.UUCP> 29 Oct 85 05:40:18 GMT
# MS-Kermit with Heath-19 emulation mode enabled
# (h19k: changed ":pt@:" to ":it@"
h19k|h19kermit|heathkit emulation provided by Kermit (no auto margin):\
:am@:da:db:xt:\
:it@:\
:ta@:tc=h19-u:
# Apple Macintosh with Versaterm, a terminal emulator distributed by Synergy
# Software (formerly Peripherals Computers & Supplies, Inc) of
# 2457 Perkiomen Ave., Reading, PA 19606, 1-800-876-8376. They can
# also be reached at support@synergy.com.
versaterm|versaterm vt100 emulator for the macintosh:\
:am:xn:\
:co#80:it#8:li#24:\
:al=9\E[1L:bl=^G:cd=50\E[J:ce=3\E[K:cl=50\E[;H\E[2J:\
:cm=5\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:dc=7\E[1P:\
:dl=9\E[1M:do=^J:ei=:ho=\E[H:ic=7\E[1@:im=:\
:is=\E[1;24r\E[24;1H:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:\
:kb=^H:kd=\EOB:ke=\E>\E[?1l:kl=\EOD:kr=\EOC:ks=\E=\E[?1h:\
:ku=\EOA:le=^H:mb=2\E[5m:md=2\E[1m:me=2\E[m:mr=2\E[7m:\
:nd=2\E[C:nw=^M^J:r1=\E>:rc=\E8:\
:rf=/usr/share/tabset/vt100:sc=\E7:se=2\E[m:so=2\E[7m:\
:sr=5\EM:ta=^I:ue=2\E[m:up=2\E[A:us=2\E[4m:
# From: Rick Thomas <ihnp4!btlunix!rbt>
# (xtalk: I added <rmam>/<smam> based on the init string.
xtalk|IBM PC with xtalk communication program (versions up to 3.4):\
:am:mi:ms:xo:\
:co#80:it#8:li#24:sg#1:vt#3:\
:DO=\E[%dB:LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:\
:UP=\E[%dA:\
:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
:ae=^O:al=99\E[L:as=^N:bl=^G:cb=3\E[1K:cd=50\E[J:ce=3\E[K:\
:cl=50\E[H\E[J:cm=5\E[%i%d;%dH:cr=^M:ct=\E[3g:dl=99\E[M:\
:do=^J:eA=\E(B\E)0:ho=\E[H:kb=^H:kd=\EOB:ke=\E[?1l\E>:\
:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:me=\E[m:\
:nd=2\E[C:rs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:\
:se=\E[m\040:sf=^J:so=\E[7m\040:sr=5\EM:st=\EH:ta=^I:\
:up=2\E[A:tc=vt100+fnkeys:
# The official PC terminal emulator program of the AT&T Product Centers.
# Note - insert mode commented out - doesn't seem to work on AT&T PC.
simterm|attpc running simterm:\
:am:\
:co#80:li#24:\
:al=\EL:bl=^G:cd=\EJ:ce=\EK:cl=\EH\EJ:cm=\E=%+ %+ :cr=^M:\
:dc=\ER:dl=\EM:do=\EB:ho=\EH:le=^H:me=\E&d@:nd=\EC:se=\E&d@:\
:sf=^J:so=\E&dB:te=\EVE:ti=\EVS:up=\EA:
#### Daisy wheel printers
#
# This section collects Diablo, DTC, Xerox, Qume, and other daisy
# wheel terminals. These are now largely obsolete.
#
# (diablo1620: removed :if=/usr/share/tabset/xerox1720:, no such file -- esr)
diablo1620|diablo1720|diablo450|ipsi|diablo 1620:\
:hc:os:\
:co#132:it#8:\
:ch=\E\011%i%.:ct=\E2:do=^J:hd=\ED:hu=\EU:kb=^H:le=^H:\
:st=\E1:ta=^I:up=\E^J:
diablo1620-m8|diablo1640-m8|diablo 1620 w/8 column left margin:\
:co#124:\
:is=\r \E9:tc=diablo1620:
# (diablo1640: removed :if=/usr/share/tabset/xerox1730:, no such file -- esr)
diablo1640|diablo1730|diablo1740|diablo630|x1700|diablo|xerox|diablo 1640:\
:bl=^G:se=\E&:so=\EW:ue=\ER:us=\EE:tc=diablo1620:
# (diablo1640-lm: removed :if=/usr/share/tabset/xerox1730-lm:, no such
# file -- esr)
diablo1640-lm|diablo-lm|xerox-lm|diablo 1640 with indented left margin:\
:co#124:\
:se=\E&:so=\EW:ue=\ER:us=\EE:tc=diablo1620:
diablo1740-lm|630-lm|1730-lm|x1700-lm|diablo 1740 printer:\
:tc=diablo1640-lm:
# DTC 382 with VDU. Has no :cd: so we fake it with :ce:. Standout
# :so=^P\s\002^PF: works but won't go away without dynamite :se=^P\s\0:.
# The terminal has tabs, but I'm getting tired of fighting the braindamage.
# If no tab is set or the terminal's in a bad mood, it glitches the screen
# around all of memory. Note that return puts a blank ("a return character")
# in the space the cursor was at, so we use ^P return (and thus ^P newline for
# newline). Note also that if you turn off :pt: and let Unix expand tabs,
# curses won't work (some old BSD versions) because it doesn't clear this bit,
# and cursor addressing sends a tab for row/column 9. What a losing terminal!
# I have been unable to get tabs set in all 96 lines - it always leaves at
# least one line with no tabs in it, and once you tab through that line,
# it completely weirds out.
# (dtc382: change :te: to :ti: -- it just does a clear --esr)
dtc382|DTC 382:\
:am:da:db:xs:\
:co#80:li#24:lm#96:\
:al=^P^Z:bl=^G:cd=\020\025\020\023\020\023:ce=^P^U:\
:cl=20\020\035:cm=\020\021%r%.%.:cr=^P^M:dc=^X:dl=^P^S:\
:ei=^Pi:ho=^P^R:im=^PI:le=^H:nd=^PR:pc=\177:sf=^J:te=:\
:ti=20\020\035:ue=^P \200:up=^P^L:us=^P ^P:ve=^Pb:vs=^PB:
dtc300s|DTC 300s:\
:hc:os:\
:co#132:\
:bl=^G:cr=^M:ct=\E3:do=^J:ff=^L:hd=\Eh:hu=\EH:kb=^H:le=^H:\
:sf=^J:st=\E1:ta=^I:up=^Z:
gsi|mystery gsi terminal:\
:hc:os:\
:co#132:\
:bl=^G:cr=^M:do=^J:hd=\Eh:hu=\EH:le=^H:sf=^J:ta=^I:up=^Z:
aj830|aj832|aj|anderson jacobson:\
:hc:os:\
:bl=^G:cr=^M:do=^J:hd=\E9:hu=\E8:le=^H:sf=^J:up=\E7:
# From: Chris Torek <chris@gyre.umd.edu> Thu, 7 Nov 85 18:21:58 EST
aj510|Anderson-Jacobson model 510:\
:am:mi:\
:co#80:li#24:\
:al=2*\E&I:cd=\E'P:ce=\E'L:cl=^L:cm=\E#%+ %+ :dc=.1*\E'D:\
:dl=2*\E&D:ei=\E'J:ic=:im=\E'I:ip=.1*:kd=\EZ:kl=\EW:kr=\EX:\
:ku=\EY:le=^H:nd=\EX:pc=\177:se=\E"I:so=\E"I:te=\E"N:\
:ti=\E"N:ue=\E"U:up=\EY:us=\E"U:
# From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
# This is incomplete, but it's a start.
nec5520|nec|spinwriter|nec 5520:\
:hc:os:\
:co#132:it#8:\
:bl=^G:cr=^M:ct=\E3:do=^J:ff=^L:hd=\E]s\n\E]W:\
:hu=\E]s\E9\E]W:kb=^H:le=^H:sf=^J:st=\E1:ta=^I:up=\E9:
qume5|qume|Qume Sprint 5:\
:hc:os:\
:co#80:it#8:\
:bl=^G:cr=^M:ct=\E3:do=^J:ff=^L:hd=\Eh:hu=\EH:kb=^H:le=^H:\
:sf=^J:st=\E1:ta=^I:up=^Z:
# I suspect the xerox 1720 is the same as the diablo 1620.
xerox1720|x1720|x1750|xerox 1720:\
:hc:os:\
:co#132:it#8:\
:bl=^G:cr=^M:ct=\E2:do=^J:ff=^L:le=^H:sf=^J:st=\E1:ta=^I:
#### Miscellaneous obsolete terminals, manufacturers unknown
#
# If you have any information about these (like, a manufacturer's name,
# and a date on the serial-number plate) please send it!
cad68-3|cgc3|cad68 basic monitor transparent mode size 3 chars:\
:am:bs:\
:co#73:li#36:\
:cl=^Z:ho=^^:le=^H:nd=^L:up=^K:
cad68-2|cgc2|cad68 basic monitor transparent mode size 2 chars:\
:am:bs:\
:co#85:li#39:\
:cl=^Z:ho=^^:k1=\E5:k2=\E6:k3=\E7:k4=\E8:kd=\E2:kl=\E3:\
:kr=\E4:ku=\E1:le=^H:nd=^L:se=\Em^C:so=\Em^L:up=^K:
cops10|cops|cops-10|cops 10:\
:am:bw:\
:co#80:li#24:\
:bl=^G:cd=^W:ce=^V:cl=30\030:cm=\020%+ %+ :cr=^M:do=^J:\
:kb=^H:kd=^J:kh=^Y:kl=^H:kr=^L:ku=^K:le=^H:nd=^L:sf=^J:up=^K:
# (d132: removed duplicate :ic=\E5:,
# merged in capabilities from a BRL entry -- esr)
d132|datagraphix|datagraphix 132a:\
:da:db:in:\
:co#80:li#30:\
:al=\E3:bl=^G:cl=^L:cm=\E8%i%3%3:cr=^M:dc=\E6:do=^J:ei=:\
:ho=\ET:ic=\E5:im=:kb=^H:kd=^J:kl=^H:le=^H:nd=\EL:nw=^M^J:\
:sf=^J:sr=\Ew:ta=^I:up=\EK:ve=\Em\En:vs=\Ex:
# The d800 was an early portable terminal from c.1984-85 that looked a lot
# like the original Compaq `lunchbox' portable (but no handle). It had a vt220
# mode (which is what this entry looks like) and several other lesser-known
# emulations.
d800|Direct 800/A:\
:am:bs:da:db:ms:xs:\
:co#80:it#8:li#24:\
:ac=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~:\
:ae=\E[m:as=\E[1m:bl=^G:cd=\E[J:ce=\E[K:cl=\E[1;1H\E[2J:\
:cm=\E[%i%d;%dH:cr=^M:do=^J:k1=\EOP:k2=\EOQ:k3=\EOR:\
:k4=\EOS:k5=\EOT:k6=\EOU:k7=\EOV:k8=\EOW:kd=\E[B:kl=\E[D:\
:kr=\E[C:ku=\E[A:le=^H:me=\E[m:nd=\E[C:se=\E[m:sf=\ED:\
:so=\E[7m:sr=\EM:ta=^I:ue=\E[m:up=\E[A:us=\E[4m:ve=\E[>12h:\
:vs=\E[>12l:
digilog|digilog 333:\
:bs:\
:co#80:li#16:\
:bl=^G:ce=^X:cr=^M:do=^J:ho=^N:le=^H:nd=^I:sf=^J:up=^O:
# The DWK was a terminal manufactured in the Soviet Union c.1986
dwk|dwk-vt|dwk terminal:\
:am:\
:co#80:it#8:li#24:\
:ac=+\136,Q-S.M0\177`+a\072f'g#h#i#jXkClJmFnNo~qUs_tEuPv\\wKxW~_:\
:ae=\EG:as=\EF:bl=^G:cd=\EJ:ce=\EK:cl=\EH\EJ:cm=\EY%+ %+ :\
:cr=^M:dc=\EP:do=^J:ei=:ho=\EH:ic=\EQ:im=:k1=\Ef1:k2=\Ef2:\
:k3=\Ef3:k4=\Ef4:k5=\Ef5:k6=\Ef6:k7=\Ef7:k8=\Ef8:k9=\Ef9:\
:k;=\Ef0:kD=\Ee:kI=\Ed:kN=\Eh:kP=\Eg:kb=\177:kd=\EB:kl=\ED:\
:kr=\EC:ku=\EA:le=^H:me=\EX:mr=\ET:nd=\EC:nw=^M^J:se=\EX:\
:sf=^J:so=\ET:sr=\ES:ta=^I:up=\EA:
env230|envision230|envision 230 graphics terminal:\
:xn@:\
:pf=\E[4i:po=\E[5i:ps=\E[0i:tc=vt100:
# These execuports were impact-printer ttys with a 30- or maybe 15-cps acoustic
# coupler attached, the whole rig fitting in a suitcase and more or less
# portable. Hot stuff for c.1977 :-) -- esr
ep48|ep4080|execuport 4080:\
:am:bs:os:\
:co#80:\
:bl=^G:cr=^M:do=^J:hd=^\:hu=^^:le=^H:sf=^J:
ep40|ep4000|execuport 4000:\
:co#136:tc=ep4080:
# Adam Thompson <athompso@pangea.ca> tells us:
# Informer series - these are all portable units, resembling older
# automatic bread-baking machines. The terminal looks like a `clamshell'
# design, but isn't. The structure is similar to the Direct terminals,
# but only half the width. The entire unit is only about 10" wide.
# It features an 8" screen (6" or 7" if you have color!), and an 9"x6"
# keyboard. All the keys are crammed together, much like some laptop
# PCs today, but perhaps less well organized...all these units have a
# bewildering array of plugs on the back, including a built-in modem.
# The 305 was a color version of the 304; the 306 and 307 were mono and
# color terminals built for IBM bisync protocols.
# From: Paul Leondis <unllab@amber.berkeley.edu>
ifmr|Informer D304:\
:am:bs:\
:co#80:li#24:\
:cd=\E/:ce=\EQ:cl=\EZ:cm=\EY%r%+ %+ :dc=\E\\:do=^J:ei=:\
:ho=\EH:ic=\E[:im=:le=^H:me=\EK:nd=\EC:se=\EK:so=\EJ:sr=\En:\
:up=\EA:
# Entry largely based on wy60 and has the features of wy60ak.
# (sgr removed to fit entry within 1023 bytes)
# (rmacs/smacs removed for consistency)
# (acsc removed to fit entry within 1023 bytes)
# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
opus3n1+|Esprit Opus3n1+ in wy60 mode with ANSI arrow keys:\
:am:bw:hs:km:mi:ms:ul:xo:\
:co#80:li#24:ws#80:\
:al=4\EE:bl=^G:bt=\EI:cd=100\EY:ce=\ET:cl=100\E*:\
:cm=\Ea%i%dR%dC:cr=^M:ct=\E0:dc=11\EW:dl=5\ER:do=^J:\
:ds=\Ez(\r:ei=\Er:fs=^M:ho=2\036:\
:if=/usr/share/tabset/std:im=\Eq:ip=3:\
:is=\E`\072\Ee(\EO\Ee6\Ec41\E~4\Ec21\Ed/\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177\Ezz`\E[F\177\EA1*\EZH12:\
:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
:k7=^AF\r:k8=^AG\r:k9=^AH\r:kD=\EW:kI=\EQ:kN=\EK:kP=\EJ:\
:kb=^H:kd=\E[B:kh=^^:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mb=\EG2:\
:me=\EcD:mh=\EGp:nd=^L:nw=3\r\n:sf=^J:sr=7\Ej:st=\E1:\
:ta=5\011:te=:\
:ti=\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177:\
:ts=\Ez(:uc=\EG8\EG0:up=^K:ve=\E`1:vi=\E`0:tc=adm+sgr:
teletec|Teletec Datascreen:\
:am:bs:\
:co#80:li#24:\
:bl=^G:cl=^L:cr=^M:do=^J:ho=^^:le=^H:nd=^_:sf=^J:up=^K:
# From: Mark Dornfeld <romwa@ucbvax.berkeley.edu>
# This description is for the LANPAR Technologies VISION 3220
# terminal from 1984/85. The function key definitions k0-k5 represent the
# edit keypad: FIND, INSERT HERE, REMOVE, SELECT, PREV SCREEN,
# NEXT SCREEN. The key definitions k6-k9 represent the PF1 to PF4 keys.
#
# Kenneth Randell <kenr@datametrics.com> writes on 31 Dec 1998:
# I had a couple of scopes (3221) like this once where I used to work, around
# the 1987 time frame if memory serves me correctly. These scopes were made
# by an outfit called LANPAR Technologies, and were meant to me DEC VT 220
# compatible. The 3220 was a plain text terminal like the VT-220, the 3221
# was a like the VT-240 (monochrome with Regis + Sixel graphics), and the 3222
# was like the VT-241 (color with Regis + Sixel Graphics). These terminals
# (3221) cost about $1500 each, and one was always broken -- had to be sent
# back to the shop for repairs.
# The only real advantage these scopes had over the VT-240's were:
# 1) They were faster in the Regis display, or at least the ones I did
# 2) They had a handy debugging feature where you could split-screen the
# scope, the graphics would appear on the top, and the REGIS commands would
# appear on the bottom. I don't remember the VT-240s being able to do that.
# I would swear that LANPAR Technologies was in MA someplace, but since I
# don't work at the same place anymore, and those terminals and manuals were
# long since junked, I cannot be any more sure than that.
#
# (v3220: removed obsolete ":kn#10:",
# I added <rmam>/<smam> based on the init string -- esr)
v3220|LANPAR Vision II model 3220/3221/3222:\
:am:bs:mi:xn:\
:co#80:it#8:li#24:\
:RA=\E[?7l:SA=\E[?7h:al=\E[L:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\
:cm=\E[%i%d;%dH:dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:im=\E[4h:\
:is=\E>\E[?3l\E[?7h\E[?8h\E[p:k0=\E[1~:k1=\E[2~:\
:k2=\E[3~:k3=\E[4~:k4=\E[5~:k5=\E[6~:k6=\E[OP:k7=\E[OQ:\
:k8=\E[OR:k9=\E[OS:kd=\E[B:ke=\E>:kh=\E[H:kl=\E[D:kr=\E[C:\
:ks=\E=:ku=\E[A:le=^H:me=\E[m:nd=\E[C:se=\E[m:so=\E[7m:\
:sr=\EM:ta=^I:ue=\E[m:up=\E[A:us=\E[4m:
######## ICH/ICH1 VERSUS RMIR/SMIR
#
# Some non-curses applications get confused if both ich/ich1 and rmir/smir
# are present; the symptom is doubled characters in an update using insert.
# These applications are technically correct; in both 4.3BSD termcap and
# terminfo, you're not actually supposed to specify both ich/ich1 and rmir/smir
# unless the terminal needs both. To my knowledge, no terminal still in this
# file requires both other than the very obsolete dm2500.
#
# For ncurses-based applications this is not a problem, as ncurses uses
# one or the other as appropriate but never mixes the two. Therefore we
# have not corrected entries like `linux' and `xterm' that specify both.
# If you see doubled characters from these, use the linux-nic and xterm-nic
# entries that suppress ich/ich1. And upgrade to ncurses!
#
######## VT100/ANSI/ISO 6429/ECMA-48/PC-TERM TERMINAL STANDARDS
#
# ANSI X3.64 has been withdrawn and replaced by ECMA-48. The ISO 6429 and
# ECMA-48 standards are said to be almost identical, but are not the same
# as X3.64 (though for practical purposes they are close supersets of it).
#
# You can obtain ECMA-48 for free by sending email to helpdesk@ecma.ch
# requesting the standard(s) you want (i.e. ECMA-48, "Control Functions for
# Coded Character Sets"), include your snail-mail address, and you should
# receive the document in due course. Don't expect an email acknowledgement.
#
# Related standards include "X3.4-1977: American National Standard Code for
# Information Interchange" (the ASCII standard) and "X3.41.1974:
# Code-Extension Techniques for Use with the 7-Bit Coded Character Set of
# American National Standard for Information Interchange." I believe (but
# am not certain) that these are effectively identical to ECMA-6 and ECMA-35
# respectively.
#
#### VT100/ANSI/ECMA-48
#
# ANSI Standard (X3.64) Control Sequences for Video Terminals and Peripherals
# and ECMA-48 Control Functions for Coded Character Sets.
#
# Much of the content of this comment is adapted from a table prepared by
# Richard Shuford, based on a 1984 Byte article. Terminfo correspondences,
# discussion of some terminfo-related issues, and updates to capture ECMA-48
# have been added. Control functions described in ECMA-48 only are tagged
# with * after their names.
#
# The table is a complete list of the defined ANSI X3.64/ECMA-48 control
# sequences. In the main table, \E stands for an escape (\033) character,
# SPC for space. Pn stands for a single numeric parameter to be inserted
# in decimal ASCII. Ps stands for a list of such parameters separated by
# semicolons. Parameter meanings for most parametrized sequences are
# decribed in the notes.
#
# Sequence Sequence Parameter or
# Mnemonic Name Sequence Value Mode terminfo
# -----------------------------------------------------------------------------
# APC Applicatn Program Command \E _ - Delim -
# BEL Bell * ^G - - bel
# BPH Break Permitted Here * \E B - * -
# BS Backpace * ^H - EF -
# CAN Cancel * ^X - - - (A)
# CBT Cursor Backward Tab \E [ Pn Z 1 eF cbt
# CCH Cancel Previous Character \E T - - -
# CHA Cursor Horizntal Absolute \E [ Pn G 1 eF hpa (B)
# CHT Cursor Horizontal Tab \E [ Pn I 1 eF tab (C)
# CMD Coding Method Delimiter * \E
# CNL Cursor Next Line \E [ Pn E 1 eF nel (D)
# CPL Cursor Preceding Line \E [ Pn F 1 eF -
# CPR Cursor Position Report \E [ Pn ; Pn R 1, 1 - - (E)
# CSI Control Sequence Intro \E [ - Intro -
# CTC Cursor Tabulation Control \E [ Ps W 0 eF - (F)
# CUB Cursor Backward \E [ Pn D 1 eF cub
# CUD Cursor Down \E [ Pn B 1 eF cud
# CUF Cursor Forward \E [ Pn C 1 eF cuf
# CUP Cursor Position \E [ Pn ; Pn H 1, 1 eF cup (G)
# CUU Cursor Up \E [ Pn A 1 eF cuu
# CVT Cursor Vertical Tab \E [ Pn Y - eF - (H)
# DA Device Attributes \E [ Pn c 0 - -
# DAQ Define Area Qualification \E [ Ps o 0 - -
# DCH Delete Character \E [ Pn P 1 eF dch
# DCS Device Control String \E P - Delim -
# DL Delete Line \E [ Pn M 1 eF dl
# DLE Data Link Escape * ^P - - -
# DMI Disable Manual Input \E \ - Fs -
# DSR Device Status Report \E [ Ps n 0 - - (I)
# DTA Dimension Text Area * \E [ Pn ; Pn SPC T - PC -
# EA Erase in Area \E [ Ps O 0 eF - (J)
# ECH Erase Character \E [ Pn X 1 eF ech
# ED Erase in Display \E [ Ps J 0 eF ed (J)
# EF Erase in Field \E [ Ps N 0 eF -
# EL Erase in Line \E [ Ps K 0 eF el (J)
# EM End of Medium * ^Y - - -
# EMI Enable Manual Input \E b Fs -
# ENQ Enquire ^E - - -
# EOT End Of Transmission ^D - * -
# EPA End of Protected Area \E W - - - (K)
# ESA End of Selected Area \E G - - -
# ESC Escape ^[ - - -
# ETB End Transmission Block ^W - - -
# ETX End of Text ^C - - -
# FF Form Feed ^L - - -
# FNK Function Key * \E [ Pn SPC W - - -
# GCC Graphic Char Combination* \E [ Pn ; Pn SPC B - - -
# FNT Font Selection \E [ Pn ; Pn SPC D 0, 0 FE -
# GSM Graphic Size Modify \E [ Pn ; Pn SPC B 100, 100 FE - (L)
# GSS Graphic Size Selection \E [ Pn SPC C none FE -
# HPA Horz Position Absolute \E [ Pn ` 1 FE - (B)
# HPB Char Position Backward \E [ j 1 FE -
# HPR Horz Position Relative \E [ Pn a 1 FE - (M)
# HT Horizontal Tab * ^I - FE - (N)
# HTJ Horz Tab w/Justification \E I - FE -
# HTS Horizontal Tab Set \E H - FE hts
# HVP Horz & Vertical Position \E [ Pn ; Pn f 1, 1 FE - (G)
# ICH Insert Character \E [ Pn @ 1 eF ich
# IDCS ID Device Control String \E [ SPC O - * -
# IGS ID Graphic Subrepertoire \E [ SPC M - * -
# IL Insert Line \E [ Pn L 1 eF il
# IND Index \E D - FE -
# INT Interrupt \E a - Fs -
# JFY Justify \E [ Ps SPC F 0 FE -
# IS1 Info Separator #1 * ^_ - * -
# IS2 Info Separator #1 * ^^ - * -
# IS3 Info Separator #1 * ^] - * -
# IS4 Info Separator #1 * ^\ - * -
# LF Line Feed ^J - - -
# LS1R Locking Shift Right 1 * \E ~ - - -
# LS2 Locking Shift 2 * \E n - - -
# LS2R Locking Shift Right 2 * \E } - - -
# LS3 Locking Shift 3 * \E o - - -
# LS3R Locking Shift Right 3 * \E | - - -
# MC Media Copy \E [ Ps i 0 - - (S)
# MW Message Waiting \E U - - -
# NAK Negative Acknowledge * ^U - * -
# NBH No Break Here * \E C - - -
# NEL Next Line \E E - FE nel (D)
# NP Next Page \E [ Pn U 1 eF -
# NUL Null * ^@ - - -
# OSC Operating System Command \E ] - Delim -
# PEC Pres. Expand/Contract * \E Pn SPC Z 0 - -
# PFS Page Format Selection * \E Pn SPC J 0 - -
# PLD Partial Line Down \E K - FE - (T)
# PLU Partial Line Up \E L - FE - (U)
# PM Privacy Message \E ^ - Delim -
# PP Preceding Page \E [ Pn V 1 eF -
# PPA Page Position Absolute * \E [ Pn SPC P 1 FE -
# PPB Page Position Backward * \E [ Pn SPC R 1 FE -
# PPR Page Position Forward * \E [ Pn SPC Q 1 FE -
# PTX Parallel Texts * \E [ \ - - -
# PU1 Private Use 1 \E Q - - -
# PU2 Private Use 2 \E R - - -
# QUAD Typographic Quadding \E [ Ps SPC H 0 FE -
# REP Repeat Char or Control \E [ Pn b 1 - rep
# RI Reverse Index \E M - FE - (V)
# RIS Reset to Initial State \E c - Fs -
# RM Reset Mode * \E [ Ps l - - - (W)
# SACS Set Add. Char. Sep. * \E [ Pn SPC / 0 - -
# SAPV Sel. Alt. Present. Var. * \E [ Ps SPC ] 0 - - (X)
# SCI Single-Char Introducer \E Z - - -
# SCO Sel. Char. Orientation * \E [ Pn ; Pn SPC k - - -
# SCS Set Char. Spacing * \E [ Pn SPC g - - -
# SD Scroll Down \E [ Pn T 1 eF rin
# SDS Start Directed String * \E [ Pn ] 1 - -
# SEE Select Editing Extent \E [ Ps Q 0 - - (Y)
# SEF Sheet Eject & Feed * \E [ Ps ; Ps SPC Y 0,0 - -
# SGR Select Graphic Rendition \E [ Ps m 0 FE sgr (O)
# SHS Select Char. Spacing * \E [ Ps SPC K 0 - -
# SI Shift In ^O - - - (P)
# SIMD Sel. Imp. Move Direct. * \E [ Ps ^ - - -
# SL Scroll Left \E [ Pn SPC @ 1 eF -
# SLH Set Line Home * \E [ Pn SPC U - - -
# SLL Set Line Limit * \E [ Pn SPC V - - -
# SLS Set Line Spacing * \E [ Pn SPC h - - -
# SM Select Mode \E [ Ps h none - - (W)
# SO Shift Out ^N - - - (Q)
# SOH Start Of Heading * ^A - - -
# SOS Start of String * \E X - - -
# SPA Start of Protected Area \E V - - - (Z)
# SPD Select Pres. Direction * \E [ Ps ; Ps SPC S 0,0 - -
# SPH Set Page Home * \E [ Ps SPC G - - -
# SPI Spacing Increment \E [ Pn ; Pn SPC G none FE -
# SPL Set Page Limit * \E [ Ps SPC j - - -
# SPQR Set Pr. Qual. & Rapid. * \E [ Ps SPC X 0 - -
# SR Scroll Right \E [ Pn SPC A 1 eF -
# SRCS Set Reduced Char. Sep. * \E [ Pn SPC f 0 - -
# SRS Start Reversed String * \E [ Ps [ 0 - -
# SSA Start of Selected Area \E F - - -
# SSU Select Size Unit * \E [ Pn SPC I 0 - -
# SSW Set Space Width * \E [ Pn SPC [ none - -
# SS2 Single Shift 2 (G2 set) \E N - Intro -
# SS3 Single Shift 3 (G3 set) \E O - Intro -
# ST String Terminator \E \ - Delim -
# STAB Selective Tabulation * \E [ Pn SPC ^ - - -
# STS Set Transmit State \E S - - -
# STX Start pf Text * ^B - - -
# SU Scroll Up \E [ Pn S 1 eF indn
# SUB Substitute * ^Z - - -
# SVS Select Line Spacing * \E [ Pn SPC \ 1 - -
# SYN Synchronous Idle * ^F - - -
# TAC Tabul. Aligned Centered * \E [ Pn SPC b - - -
# TALE Tabul. Al. Leading Edge * \E [ Pn SPC a - - -
# TATE Tabul. Al. Trailing Edge* \E [ Pn SPC ` - - -
# TBC Tab Clear \E [ Ps g 0 FE tbc
# TCC Tabul. Centered on Char * \E [ Pn SPC c - - -
# TSR Tabulation Stop Remove * \E [ Pn SPC d - FE -
# TSS Thin Space Specification \E [ Pn SC E none FE -
# VPA Vert. Position Absolute \E [ Pn d 1 FE vpa
# VPB Line Position Backward * \E [ Pn k 1 FE -
# VPR Vert. Position Relative \E [ Pn e 1 FE - (R)
# VT Vertical Tabulation * ^K - FE -
# VTS Vertical Tabulation Set \E J - FE -
#
# ---------------------------------------------------------------------------
#
# Notes:
#
# Some control characters are listed in the ECMA-48 standard without
# being assigned functions relevant to terminal control there (they
# referred to other standards such as ISO 1745 or ECMA-35). They are listed
# here anyway for completeness.
#
# (A) ECMA-48 calls this "CancelCharacter" but retains the CCH abbreviation.
#
# (B) There seems to be some confusion abroad between CHA and HPA. Most
# `ANSI' terminals accept the CHA sequence, not the HPA. but terminfo calls
# the capability (hpa). ECMA-48 calls this "Cursor Character Absolute" but
# preserved the CHA abbreviation.
#
# (C) CHT corresponds to terminfo (tab). Usually it has the value ^I.
# Occasionally (as on, for example, certain HP terminals) this has the HTJ
# value. ECMA-48 calls this "Cursor Forward Tabulation" but preserved the
# CHT abbreviation.
#
# (D) terminfo (nel) is usually \r\n rather than ANSI \EE.
#
# (E) ECMA-48 calls this "Active Position Report" but preserves the CPR
# abbreviation.
#
# (F) CTC parameter values: 0 = set char tab, 1 = set line tab, 2 = clear
# char tab, 3 = clear line tab, 4 = clear all char tabs on current line,
# 5 = clear all char tabs, 6 = clear all line tabs.
#
# (G) CUP and HVP are identical in effect. Some ANSI.SYS versions accept
# HVP, but always allow CUP as an alternate. ECMA-48 calls HVP "Character
# Position Absolute" but retains the HVP abbreviation.
#
# (H) ECMA calls this "Cursor Line Tabulation" but preserves the CVT
# abbreviation.
#
# (I) DSR parameter values: 0 = ready, 1 = busy, 2 = busy, will send DSR
# later, 3 = malfunction, 4 = malfunction, will send DSR later, 5 = request
# DSR, 6 = request CPR response.
#
# (J) ECMA calls ED "Erase In Page". EA/ED/EL parameters: 0 = clear to end,
# 1 = clear from beginning, 2 = clear.
#
# (K) ECMA calls this "End of Guarded Area" but preserves the EPA abbreviation.
#
# (L) The GSM parameters are vertical and horizontal parameters to scale by.
#
# (M) Some ANSI.SYS versions accept HPR, but more commonly `ANSI' terminals
# use CUF for this function and ignore HPR. ECMA-48 calls this "Character
# Position Relative" but retains the HPR abbreviation.
#
# (N) ECMA-48 calls this "Character Tabulation" but retains the HT
# abbreviation.
#
# (O) SGR parameter values: 0 = default mode (attributes off), 1 = bold,
# 2 = dim, 3 = italicized, 4 = underlined, 5 = slow blink, 6 = fast blink,
# 7 = reverse video, 8 = invisible, 9 = crossed-out (marked for deletion),
# 10 = primary font, 10 + n (n in 1..9) = nth alternative font, 20 = Fraktur,
# 21 = double underline, 22 = turn off 2, 23 = turn off 3, 24 = turn off 4,
# 25 = turn off 5, 26 = proportional spacing, 27 = turn off 7, 28 = turn off
# 8, 29 = turn off 9, 30 = black fg, 31 = red fg, 32 = green fg, 33 = yellow
# fg, 34 = blue fg, 35 = magenta fg, 36 = cyan fg, 37 = white fg, 38 = set
# fg color as in CCIT T.416, 39 = set default fg color, 40 = black bg
# 41 = red bg, 42 = green bg, 43 = yellow bg, 44 = blue bg, 45 = magenta bg,
# 46 = cyan bg, 47 = white bg, 48 = set bg color as in CCIT T.416, 39 = set
# default bg color, 50 = turn off 26, 51 = framed, 52 = encircled, 53 =
# overlined, 54 = turn off 51 & 52, 55 = not overlined, 56-59 = reserved,
# 61-65 = variable highlights for ideograms.
#
# (P) SI is also called LSO, Locking Shift Zero.
#
# (Q) SI is also called LS1, Locking Shift One.
#
# (R) Some ANSI.SYS versions accept VPR, but more commonly `ANSI' terminals
# use CUD for this function and ignore VPR. ECMA calls it `Line Position
# Absolute' but retains the VPA abbreviation.
#
# (S) MC parameters: 0 = start xfer to primary aux device, 1 = start xfer from
# primary aux device, 2 = start xfer to secondary aux device, 3 = start xfer
# from secondary aux device, 4 = stop relay to primary aux device, 5 =
# start relay to primary aux device, 6 = stop relay to secondary aux device,
# 7 = start relay to secondary aux device.
#
# (T) ECMA-48 calls this "Partial Line Forward" but retains the PLD
# abbreviation.
#
# (U) ECMA-48 calls this "Partial Line Backward" but retains the PLU
# abbreviation.
#
# (V) ECMA-48 calls this "Reverse Line Feed" but retains the RI abbreviation.
#
# (W) RM/SM modes are as follows: 1 = Guarded Area Transfer Mode (GATM),
# 2 = Keyboard Action Mode (KAM), 3 = Control Representation Mode (CRM),
# 4 = Insertion Replacement Mode, 5 = Status Report Transfer Mode (SRTM),
# 6 = Erasure Mode (ERM), 7 = Line Editing Mode (LEM), 8 = Bi-Directional
# Support Mode (BDSM), 9 = Device Component Select Mode (DCSM),
# 10 = Character Editing Mode (HEM), 11 = Positioning Unit Mode (PUM),
# 12 = Send/Receive Mode, 13 = Format Effector Action Mode (FEAM),
# 14 = Format Effector Transfer Mode (FETM), 15 = Multiple Area Transfer
# Mode (MATM), 16 = Transfer Termination Mode, 17 = Selected Area Transfer
# Mode, 18 = Tabulation Stop Mode, 19 = Editing Boundary Mode, 20 = Line Feed
# New Line Mode (LF/NL), Graphic Rendition Combination Mode (GRCM), 22 =
# Zero Default Mode (ZDM). The EBM and LF/NL modes have actually been removed
# from ECMA-48's 5th edition but are listed here for reference.
#
# (X) Select Alternate Presentation Variants is used only for non-Latin
# alphabets.
#
# (Y) "Select Editing Extent" (SEE) was ANSI "Select Edit Extent Mode" (SEM).
#
# (Z) ECMA-48 calls this "Start of Guarded Area" but retains the SPA
# abbreviation.
#
# ---------------------------------------------------------------------------
#
# Abbreviations:
#
# Intro an Introducer of some kind of defined sequence; the normal 7-bit
# X3.64 Control Sequence Introducer is the two characters "Escape ["
#
# Delim a Delimiter
#
# x/y identifies a character by position in the ASCII table (column/row)
#
# eF editor function (see explanation)
#
# FE format effector (see explanation)
#
# F is a Final character in
# an Escape sequence (F from 3/0 to 7/14 in the ASCII table)
# a control sequence (F from 4/0 to 7/14)
#
# Gs is a graphic character appearing in strings (Gs ranges from
# 2/0 to 7/14) in the ASCII table
#
# Ce is a control represented as a single bit combination in the C1 set
# of controls in an 8-bit character set
#
# C0 the familiar set of 7-bit ASCII control characters
#
# C1 roughly, the set of control chars available only in 8-bit systems.
# This is too complicated to explain fully here, so read Jim Fleming's
# article in the February 1983 BYTE, especially pages 214 through 224.
#
# Fe is a Final character of a 2-character Escape sequence that has an
# equivalent representation in an 8-bit environment as a Ce-type
# (Fe ranges from 4/0 to 5/15)
#
# Fs is a Final character of a 2-character Escape sequence that is
# standardized internationally with identical representation in 7-bit
# and 8-bit environments and is independent of the currently
# designated C0 and C1 control sets (Fs ranges from 6/0 to 7/14)
#
# I is an Intermediate character from 2/0 to 2/15 (inclusive) in the
# ASCII table
#
# P is a parameter character from 3/0 to 3/15 (inclusive) in the ASCII
# table
#
# Pn is a numeric parameter in a control sequence, a string of zero or
# more characters ranging from 3/0 to 3/9 in the ASCII table
#
# Ps is a variable number of selective parameters in a control sequence
# with each selective parameter separated from the other by the code
# 3/11 (which usually represents a semicolon); Ps ranges from
# 3/0 to 3/9 and includes 3/11
#
# * Not relevant to terminal control, listed for completeness only.
#
# Format Effectors versus Editor Functions
#
# A format effector specifies how following output is to be displayed.
# An editor function allows you to modify the display. Informally
# format effectors may be destructive; format effectors should not be.
#
# For instance, a format effector that moves the "active position" (the
# cursor or equivalent) one space to the left would be useful when you want to
# create an overstrike, a compound character made of two standard characters
# overlaid. Control-H, the Backspace character, is actually supposed to be a
# format effector, so you can do this. But many systems use it in a
# nonstandard fashion, as an editor function, deleting the character to the
# left of the cursor and moving the cursor left. When Control-H is assumed to
# be an editor function, you cannot predict whether its use will create an
# overstrike unless you also know whether the output device is in an "insert
# mode" or an "overwrite mode". When Control-H is used as a format effector,
# its effect can always be predicted. The familiar characters carriage
# return, linefeed, formfeed, etc., are defined as format effectors.
#
# NOTES ON THE DEC VT100 IMPLEMENTATION
#
# Control sequences implemented in the VT100 are as follows:
#
# CPR, CUB, CUD, CUF, CUP, CUU, DA, DSR, ED, EL, HTS, HVP, IND,
# LNM, NEL, RI, RIS, RM, SGR, SM, TBC
#
# plus several private DEC commands.
#
# Erasing parts of the display (EL and ED) in the VT100 is performed thus:
#
# Erase from cursor to end of line Esc [ 0 K or Esc [ K
# Erase from beginning of line to cursor Esc [ 1 K
# Erase line containing cursor Esc [ 2 K
# Erase from cursor to end of screen Esc [ 0 J or Esc [ J
# Erase from beginning of screen to cursor Esc [ 1 J
# Erase entire screen Esc [ 2 J
#
# Some brain-damaged terminal/emulators respond to Esc [ J as if it were
# Esc [ 2 J, but this is wrong; the default is 0.
#
# The VT100 responds to receiving the DA (Device Attributes) control
#
# Esc [ c (or Esc [ 0 c)
#
# by transmitting the sequence
#
# Esc [ ? l ; Ps c
#
# where Ps is a character that describes installed options.
#
# The VT100's cursor location can be read with the DSR (Device Status
# Report) control
#
# Esc [ 6 n
#
# The VT100 reports by transmitting the CPR sequence
#
# Esc [ Pl ; Pc R
#
# where Pl is the line number and Pc is the column number (in decimal).
#
# The specification for the DEC VT100 is document EK-VT100-UG-003.
#### ANSI.SYS
#
# Here is a description of the color and attribute controls supported in the
# the ANSI.SYS driver under MS-DOS. Most console drivers and ANSI
# terminal emulators for Intel boxes obey these. They are a proper subset
# of the ECMA-48 escapes.
#
# 0 all attributes off
# 1 foreground bright
# 4 underscore on
# 5 blink on/background bright (not reliable with brown)
# 7 reverse-video
# 8 set blank (non-display)
# 10 set primary font
# 11 set first alternate font (on PCs, display ROM characters 1-31)
# 12 set second alternate font (on PCs, display IBM high-half chars)
#
# Color attribute sets
# 3n set foreground color / 0=black, 1=red, 2=green, 3=brown,
# 4n set background color \ 4=blue, 5=magenta, 6=cyan, 7=white
# Bright black becomes gray. Bright brown becomes yellow,
# These coincide with the prescriptions of the ISO 6429/ECMA-48 standard.
#
# * If the 5 attribute is on and you set a background color (40-47) it is
# supposed to enable bright background.
#
# * Many VGA cards (such as the Paradise and compatibles) do the wrong thing
# when you try to set a "bright brown" (yellow) background with attribute
# 5 (you get a blinking yellow foreground instead). A few displays
# (including the System V console) support an attribute 6 that undoes this
# braindamage (this is required by iBCS2).
#
# * Some older versions of ANSI.SYS have a bug that causes thems to require
# ESC [ Pn k as EL rather than the ANSI ESC [ Pn K. (This is not ECMA-48
# compatible.)
#### Intel Binary Compatibility Standard
#
# For comparison, here are the capabilities implied by the Intel Binary
# Compatibility Standard for UNIX systems (Intel order number 468366-001).
# These recommendations are optional. IBCS2 allows the leading escape to
# be either the 7-bit \E[ or 8-bit \0233 introducer, in accordance with
# the ANSI X.364/ISO 6429/ECMA-48 standard. Here are the iBCS2 capabilities
# (as described in figure 9-3 of the standard). Those expressed in the ibcs2
# terminfo entry are followed with the corresponding capability in parens:
#
# CSI <n>k disable (n=0) or enable (n=1) keyclick
# CSI 2h lock keyboard
# CSI 2i send screen as input
# CSI 2l unlock keyboard
# CSI 6m enable background color intensity
# CSI <0-2>c reserved
# CSI <0-59>m select graphic rendition
# CSI <n>;<m>H (cup) cursor to line n and column m
# CSI <n>;<m>f cursor to line n and column m
# CSI <n>@ (ich) insert characters
# CSI <n>A (cuu) cursor up n lines
# CSI <n>B (cud) cursor down n lines
# CSI <n>C (cuu) cursor right n characters
# CSI <n>D (cud) cursor left n characters
# CSI <n>E cursor down n lines and in first column
# CSI <n>F cursor up n lines and in first column
# CSI <n>G (hpa) position cursor at column n-1
# CSI <n>J (ed) erase in display
# CSI <n>K (el) erase in line
# CSI <n>L (il) insert line(s)
# CSI <n>P (dch) delete characters
# CSI <n>S (indn) scroll up n lines
# CSI <n>T (rin) scroll down n lines
# CSI <n>X (ech) erase characters
# CSI <n>Z (cbt) back up n tab stops
# CSI <n>` cursor to column n on line
# CSI <n>a (cuu) cursor right n characters
# CSI <n>d (vpa) cursor to line n
# CSI <n>e cursor down n lines and in first column
# CSI <n>g (cbt) clear all tabs
# CSI <n>z make virtual terminal n active
# CSI ?7h (smam) turn automargin on
# CSI ?7l (rmam) turn automargin off
# CSI s save cursor position
# CSI u restore cursor position to saved value
# CSI =<c>A set overscan color
# CSI =<c>F set normal foreground color
# CSI =<c>G set normal background color
# CSI =<c>H set reverse foreground color
# CSI =<c>I set reverse foreground color
# CSI =<c>J set graphic foreground color
# CSI =<c>K set graphic foreground color
# CSI =<n>g (dispc) display n from alternate graphics character set
# CSI =<p>;<d>B set bell parameters
# CSI =<s>;<e>C set cursor parameters
# CSI =<x>D enable/disable intensity of background color
# CSI =<x>E set/clear blink vs. bold background
# CSI 7 (sc) (sc) save cursor position
# CSI 8 (rc) (rc) restore cursor position to saved value
# CSI H (hts) (hts) set tab stop
# CSI Q<n><string> define function key string
# (string must begin and end with delimiter char)
# CSI c (clear) clear screen
#
# The lack of any specification for attributes in SGR (among other things)
# makes this a wretchedly weak standard. The table above is literally
# everything iBSC2 has to say about terminal escape sequences; there is
# no further discussion of their meaning or how to set the parameters
# in these sequences at all.
#
######## NONSTANDARD CAPABILITY TRANSLATIONS USED IN THIS FILE
#
# The historical termcap file entries were written primarily in 4.4BSD termcap.
# The 4.4BSD termcap set was substantially larger than the original 4.1BSD set,
# with the extension names chosen for compatibility with the termcap names
# assigned in System V terminfo. There are some variant extension sets out
# there. We try to describe them here.
#
# XENIX extensions:
#
# The XENIX extensions include a set of function-key capabilities as follows:
#
# code XENIX variable name terminfo name name clashes?
# ---- ------------------- ------------- -----------------------
# CL key_char_left
# CR key_char_right
# CW key_change_window create_window
# EN key_end kend
# HM key_home khome
# HP ??
# LD key_delete_line kdl1
# LF key_linefeed label_off
# NU key_next_unlocked_cell
# PD key_page_down knp
# PL ??
# PN start_print mc5
# PR ??
# PS stop_print mc4
# PU key_page_up kpp pulse
# RC key_recalc remove_clock
# RF key_toggle_ref req_for_input
# RT key_return kent
# UP key_up_arrow kcuu1 parm_up_cursor
# WL key_word_left
# WR key_word_right
#
# The XENIX extensions also include the following character-set and highlight
# capabilities:
#
# XENIX terminfo function
# ----- -------- ------------------------------
# GS smacs start alternate character set
# GE rmacs end alternate character set
# GG :as:/:ae: glitch (analogous to :sg:/:ug:)
# bo blink begin blink (not used in /etc/termcap)
# be end blink (not used in /etc/termcap)
# bb blink glitch (not used in /etc/termcap)
# it dim begin dim (not used in /etc/termcap)
# ie end dim (not used in /etc/termcap)
# ig dim glitch (not used in /etc/termcap)
#
# Finally, XENIX also used the following forms-drawing capabilities:
#
# single double type ASCII approximation
# ------ ------ ------------- -------------------
# GV Gv vertical line |
# GH Gv horizontal line - _
# G1 G5 top right corner _ |
# G2 G6 top left corner |
# G3 G7 bottom left corner |_
# G4 G8 bottom right corner _|
# GD Gd down-tick character T
# GL Gl left-tick character -|
# GR Gr right-tick character |-
# GC Gc middle intersection -|-
# GU Gu up-tick character _|_
#
# These were invented to take advantage of the IBM PC ROM character set. One
# can compose an acsc string from the single-width characters as follows
# "j{G4}k{G1}l{G2}m{G3}q{GH}x{GV}t{GR}u{GL}v{GU}w{GD}n{GC}"
# When translating a termcap file, ncurses tic will do this automatically.
# The double forms characters don't fit the SVr4 terminfo model.
#
# AT&T Extensions:
#
# The old AT&T 5410, 5420, 5425, pc6300plus, 610, and s4 entries used a set of
# nonstandard capabilities. Its signature is the KM capability, used to name
# some sort of keymap file. EE, BO, CI, CV, XS, DS, FL and FE are in this
# set. Comments in the original, and a little cross-checking with other AT&T
# documentation, seem to establish that BO=:mr: (start reverse video), DS=:mh:
# (start dim), XS=:mk: (secure/invisible mode), EE=:me: (end highlights),
# FL=:LO: (enable soft labels), FE=:LF: (disable soft labels), CI=:vi: (make
# cursor invisible), and CV=:ve: (make cursor normal).
#
# HP Extensions
#
# The HP library (as of mid-1995, their term.h file version 70.1) appears to
# have the System V capabilities up to SVr1 level. After that, it supports
# two nonstandard caps meml and memu corresponding to the old termcap :ml:,
# :mu: capabilities. After that, it supports caps plab_norm, label_on,
# label_off, and key_f11..key_f63 capabilities like SVr4's. This makes the
# HP binary format incompatible with SVr4's.
#
# IBM Extensions
#
# There is a set of nonstandard terminfos used by IBM's AIX operating system.
# The AIX terminfo library diverged from SVr1 terminfo, and replaces all
# capabilities following prtr_non with the following special capabilties:
# box[12], batt[12], colb[0123456789], colf[0123456789], f[01234567], kbtab,
# kdo, kcmd, kcpn, kend, khlp, knl, knpn, kppn, kppn, kquit, ksel, kscl, kscr,
# ktab, kmpf[123456789], apstr, ksf1..ksf10, kf11...kf63, kact, topl, btml,
# rvert, lvert. Some of these are identical to XPG4/SVr4 equivalents:
# kcmd, kend, khlp, and kf11...kf63. Two others (kbtab and ksel) can be
# renamed (to kcbt and kslt). The places in the box[12] capabilities
# correspond to acsc chars, here is the mapping:
#
# box1[0] = ACS_ULCORNER
# box1[1] = ACS_HLINE
# box1[2] = ACS_URCORNER
# box1[3] = ACS_VLINE
# box1[4] = ACS_LRCORNER
# box1[5] = ACS_LLCORNER
# box1[6] = ACS_TTEE
# box1[7] = ACS_RTEE
# box1[8] = ACS_BTEE
# box1[9] = ACS_LTEE
# box1[10] = ACS_PLUS
#
# The box2 characters are the double-line versions of these forms graphics.
# The AIX binary terminfo format is incompatible with SVr4's.
#
# Iris console extensions:
#
# HS is half-intensity start; HE is half-intensity end
# CT is color terminal type (for Curses & rogue)
# CP is color change escape sequence
# CZ are color names (for Curses & rogue)
#
# The ncurses tic utility recognizes HS as an alias for mh <dim>.
#
# TC Extensions:
#
# There is a set of extended termcaps associated with something
# called the "Terminal Control" or TC package created by MainStream Systems,
# Winfield Kansas. This one also uses GS/GE for as/ae, and also uses
# CF for civis and CO for cvvis. Finally, they define a boolean :ct:
# that flags color terminals.
#
######## CHANGE HISTORY
#
# The last /etc/termcap version maintained by John Kunze was 8.3, dated 8/5/94.
# Releases 9 and up are maintained by Eric S. Raymond as part of the ncurses
# project.
#
# This file contains all the capability information present in John Kunze's
# last version of the termcap master file, except as noted in the change
# comments at end of file. Some information about very ancient obsolete
# capabilities has been moved to comments. Some all-numeric names of older
# terminals have been retired.
#
# I changed :MT: to :km: (the 4.4BSD name) everywhere. I commented out some
# capabilities (EP, dF, dT, dV, kn, ma, ml, mu, xr, xx) that are no longer
# used by BSD curses.
#
# The 9.1.0 version of this file was translated from my lightly-edited copy of
# 8.3, then mechanically checked against 8.3 using Emacs Lisp code written for
# the purpose. Unless the ncurses tic implementation and the Lisp code were
# making perfectly synchronized mistakes which I then failed to catch by
# eyeball, the translation was correct and perfectly information-preserving.
#
# Major version number bumps correspond to major version changes in ncurses.
#
# Here is a log of the changes since then:
#
# 9.1.0 (Wed Feb 1 04:50:32 EST 1995):
# * First terminfo master translated from 8.3.
# 9.2.0 (Wed Feb 1 12:21:45 EST 1995):
# * Replaced Wyse entries with updated entries supplied by vendor.
#
# 9.3.0 (Mon Feb 6 19:14:40 EST 1995):
# * Added contact & status info from G. Clark Brown <clark@sssi.com>.
# 9.3.1 (Tue Feb 7 12:00:24 EST 1995):
# * Better XENIX keycap translation. Describe TC termcaps.
# * Contact and history info supplied by Qume.
# 9.3.2 (Sat Feb 11 23:40:02 EST 1995):
# * Raided the Shuford FTP site for recent termcaps/terminfos.
# * Added information on X3.64 and VT100 standard escape sequences.
# 9.3.3 (Mon Feb 13 12:26:15 EST 1995):
# * Added a correct X11R6 xterm entry.
# * Fixed terminfo translations of padding.
# 9.3.4 (Wed Feb 22 19:27:34 EST 1995):
# * Added correct acsc/smacs/rmacs strings for vt100 and xterm.
# * Added u6/u7/u8/u9 capabilities.
# * Added PCVT entry.
# 9.3.5 (Thu Feb 23 09:37:12 EST 1995):
# * Emacs uses :so:, not :mr:, for its mode line. Fix linux entry
# to use reverse-video standout so Emacs will look right.
# * Added el1 capability to ansi.
# * Added smacs/rmacs to ansi.sys.
#
# 9.4.0 (Sat Feb 25 16:43:25 EST 1995):
# * New mt70 entry.
# * Added COPYRIGHTS AND OTHER DELUSIONS.
# * Added AT&T 23xx & 500/513, vt220 and vt420, opus3n1+, netronics
# smartvid & smarterm, ampex 175 & 219 & 232,
# env230, falco ts100, fluke, intertube, superbrain, ncr7901, vic20,
# ozzie, trs200, tr600, Tandy & Texas Instruments VDTs, intext2,
# screwpoint, fviewpoint, Contel Business Systems, Datamedia Colorscan,
# adm36, mime314, ergo4000, ca22851. Replaced att7300, esprit, dd5500.
# * Replaced the Perkin-Elmer entries with vendor's official ones.
# * Restored the old minimal-ansi entry, luna needs it.
# * Fixed some incorrect ip and proportional-padding translations.
# 9.4.1 (Mon Feb 27 14:18:33 EST 1995):
# * Fix linux & AT386 sgr strings to do A_ALTCHARSET turnoff correctly.
# * Make the xterm entry 65 lines again; create xterm25 and xterm24
# to force a particular height.
# * Added beehive4 and reorganized other Harris entries.
# 9.4.2 (Thu Mar 9 01:45:44 EST 1995):
# * Merged in DEC's official entries for its terminals. The only old
# entry I kept was Doug Gwyn's alternate vt100 (as vt100-avo).
# * Replaced the translated BBN Bitgraph entries with purpose-built
# ones from AT&T's SVr3.
# * Replaced the AT&T entries with AT&T's official terminfos.
# * Added teleray 16, vc415, cops10.
# * Merged in many individual capabilities from SCO terminfo files.
# 9.4.3 (Mon Mar 13 02:37:53 EST 1995):
# * Typo fixes.
# * Change linux entry so A_PROTECT enables IBM-PC ROM characters.
# 9.4.4 (Mon Mar 27 12:32:35 EST 1995):
# * Added tty35, Ann Arbor Guru series. vi300 and 550, cg7900, tvi803,
# pt210, ibm3164, IBM System 1, ctrm, Tymshare scanset, dt200, adm21,
# simterm, citoh and variants.
# * Replaced sol entry with sol1 and sol2.
# * Replaced Qume QVT and Freedom-series entries with purpose-built
# terminfo entries.
# * Enhanced vt220, tvi910, tvi924, hpterm, hp2645, adm42, tek
# and dg200 entries using caps from from SCO.
# * Added the usual set of function-key mappings to ANSI entry.
# * Corrected xterm's function-key capabilities.
# 9.4.5 (Tue Mar 28 14:27:49 EST 1995):
# * Fix in xterm entry, cub and cud are not reliable under X11R6.
# 9.4.6 (Thu Mar 30 14:52:15 EST 1995):
# * Fix in xterm entry, get the arrow keys right.
# * Change some \0 escapes to \200.
# 9.4.7 (Tue Apr 4 11:27:11 EDT 1995)
# * Added apple (Videx card), adm1a, oadm31.
# * Fixed malformed ampex csr.
# * Fixed act4, cyb110; they had old-style prefix padding left in.
# * Changed mandatory to advisory padding in many entries.
# * Replaced HP entries up to hpsub with purpose-built ones.
# * Blank rmir/smir/rmdc/smdc capabilities removed.
# * Small fixes merged in from SCO entries for lpr, fos, tvi910+, tvi924.
# 9.4.8 (Fri Apr 7 09:36:34 EDT 199):
# * Replaced the Ann Arbor entries with SCO's, the init strings are
# more efficient (but the entries otherwise identical).
# * Added dg211 from Shuford archive.
# * Added synertek, apple-soroc, ibmpc, pc-venix, pc-coherent, xtalk,
# adm42-nl, pc52, gs6300, xerox820, uts30.
# * Pull SCO's padding into vi200 entry.
# * Improved capabilities for tvi4107 and other Televideo and Viewpoint
# entries merged in from SCO's descriptions.
# * Fixed old-style prefix padding on zen50, h1500.
# * Moved old superbee entry to superbee-xsb, pulled in new superbee
# entry from SCO's description.
# * Reorganized the special entries.
# * Added lm#0 to cbunix and virtual entries.
#
# 9.5.0 (Mon Apr 10 11:30:00 EDT 1995):
# * Restored cdc456tst.
# * Fixed sb1 entry, SCO erroneously left out the xsb glitch.
# * Added megatek, beacon, microkit.
# * Freeze for ncurses-1.9 release.
# 9.5.1 (Fri Apr 21 12:46:42 EDT 1995):
# * Added historical data for TAB.
# * Comment fixes from David MacKenzie.
# * Added the new BSDI pc3 entry.
# 9.5.2 (Tue Apr 25 17:27:52 EDT 1995)
# * A change in the tic -C logic now ensures that all entries in
# the termcap translation will fit in < 1024 bytes.
# * Added `bobcat' and `gator' HP consoles and the Nu machine entries
# from GNU termcap file. This merges in all their local information.
# 9.5.3 (Tue Apr 25 22:28:13 EDT 1995)
# * Changed tic -C logic to dump all capabilities used by GNU termcap.
# * Added warnings about entries with long translations (restoring
# all the GNU termcaps pushes a few over the edge).
# 9.5.4 (Wed Apr 26 15:35:09 EDT 1995)
# * Yet another tic change, and a couple of entry tweaks, to reduce the
# number of long (> 1024) termcap translations back to 0.
#
# 9.6.0 (Mon May 1 10:35:54 EDT 1995)
# * Added kf13-kf20 to Linux entry.
# * Regularize Prime terminal names.
# * Historical data on Synertek.
# * Freeze for ncurses-1.9.1.
# 9.6.1 (Sat May 6 02:00:52 EDT 1995):
# * Added true xterm-color entry, renamed djm's pseudo-color entry.
# * Eliminate whitespace in short name fields, this tanks some scripts.
# * Name field changes to shorten some long entries.
# * Termcap translation now automatically generates empty rmir/smir
# when ich1/ich is present (copes with an ancient vi bug).
# * Added `screen' entries from FSF's screen-3.6.2.
# * Added linux-nic and xterm-nic entries.
# 9.6.2 (Sat May 6 17:00:55 EDT 1995):
# * Change linux entry to use smacs=\E[11m and have an explicit acsc,
# eliminating some special-case code in ncurses.
#
# 9.7.0 (Tue May 9 18:03:12 EDT 1995):
# * Added vt320-k3, rsvidtx from the Emacs termcap.dat file. I think
# that captures everything unique from it.
# * Added reorder script generator.
# * Freeze for ncurses 1.9.2 release.
# 9.7.1 (Thu Jun 29 09:35:22 EDT 1995):
# * Added Sean Farley's kspd, flash, rs1 capabilities for linux.
# * Added Olaf Siebert's corrections for adm12.
# * ansi-pc-color now includes the colors and pairs caps, so that
# entries which use it will inherit them automatically.
# * The linux entry can now recognize the center (keypad 5) key.
# * Removed some junk that found its way into Linux acsc.
#
# 9.8.0 (Fri Jul 7 04:46:57 EDT 1995):
# * Add 50% cut mark as a desperate hack to reduce tic's core usage.
# * xterm doesn't try to use application keypad mode any more.
# * Freeze for ncurses-1.9.3 release.
# 9.8.1 (Thu Jul 19 17:02:12 EDT 1995):
# * Added corrected sun entry from vendor.
# * Added csr capability to linux entry.
# * Peter Wemm says the at386 hpa should be \E[%i%p1%dG, not \E[%p1%dG.
# * Added vt102-nsgr to cope with stupid IBM PC `VT100' emulators.
# * Some commented-out caps in long entries come back in, my code
# for computing string-table lengths had a bug in it.
# * pcansi series modified to fit comm-program reality better.
# 9.8.2 (Sat Sep 9 23:35:00 EDT 1995):
# * BSD/OS actually ships the ibmpc3 bold entry as its console.
# * Correct some bad aliases in the pcansi series
# * Added entry for QNX console.
# * Clean up duplicate long names for use with 4.4 library.
# * Change vt100 standout to be normal reverse vide, not bright reverse;
# this makes the Emacs status line look better.
# 9.8.3 (Sun Sep 10 13:07:34 EDT 1995):
# * Added Adam Thompson's VT320 entries, also his dtx-sas and z340.
# * Minor surgery, mostly on name strings, to shorten termcap version.
#
# 9.9.0 (Sat Sep 16 23:03:48 EDT 1995):
# * Added dec-vt100 for use with the EWAN emulator.
# * Added kmous to xterm for use with xterm's mouse-tracking facility.
# * Freeze for 1.9.5 alpha release.
# 9.9.1 (Wed Sep 20 13:46:09 EDT 1995):
# * Changed xterm lines to 24, the X11R6 default.
# 9.9.2 (Sat Sep 23 21:29:21 EDT 1995):
# * Added 7 newly discovered, undocumented acsc characters to linux
# entry (the pryz{|} characters).
# * ncurses no longer steals A_PROTECT. Simplify linux sgr accordingly.
# * Correct two typos in the xterm entries introduced in 9.9.1.
# * I finally figured out how to translate ko capabilities. Done.
# * Added tvi921 entries from Tim Theisen.
# * Cleanup: dgd211 -> dg211, adm42-nl -> adm42-nsl.
# * Removed mystery tec entry, it was neither interesting nor useful.
# * shortened altos3, qvt203, tvi910+, tvi92D, tvi921-g, tvi955, vi200-f,
# vi300-ss, att505-24, contel301, dm3045, f200vi, pe7000c, vc303a,
# trs200, wind26, wind40, wind50, cdc456tst, dku7003, f110, dg211,
# by making them relative to use capabilities
# * Added cuf1=^L to tvi925 from deleted variant tvi925a.
# * fixed cup in adm22 entry and parametrized strings in vt320-k3.
# * added it#8 to entries that used to have :pt: -- tvi912, vi200,
# ampex80,
# * Translate all home=\E[;H capabilities to home=\E[H, they're
# equivalent.
# * Translate \E[0m -> \E[m in [rs]mso, [rs]mul, and init strings of
# vt100 and ANSI-like terminals.
# 9.9.3 (Tue Sep 26 20:11:15 EDT 1995):
# * Added it#8 and ht=\t to *all* entries with :pt:; the ncurses tic
# does this now, too.
# * fviewpoint is gone, it duplicated screwpoint.
# * Added hp2627, graphos, graphos-30, hpex, ibmega, ibm8514, ibm8514-c,
# ibmvga, ibmvga-c, minix, mm340, mt4520-rv, screen2, screen3,
# versaterm, vi500, vsc, vt131, vt340, vt400 entries from UW.
# The UW vi50 replaces the old one, which becomes vi50adm,
# * No more embedded commas in name fields.
#
# 9.10.0 (Wed Oct 4 15:39:37 EDT 1995):
# * XENIX forms characters in fos, trs16, scoansi become acsc strings,
# * Introduced klone+* entries for describing Intel-console behavior.
# * Linux kbs is default-mapped to delete for some brain-dead reason.
# * -nsl -> -ns. The -pp syntax is obsolete.
# * Eliminate [A-Z]* primaries in accordance with SVr4 terminfo docs.
# * Make xterm entry do application-keypad mode again. I got complaints
# that it was messing up someone's 3270 emulator.
# * Added some longname fields in order to avoid warning messages from
# older tic implementations.
# * According to ctlseqs.ms, xterm has a full vt100 graphics set. Use
# it! (This gives us pi, greater than, less than, and a few more.)
# * Freeze for ncurses-1.9.6 release.
# 9.10.1 (Sat Oct 21 22:18:09 EDT 1995):
# * Add xon to a number of console entries, they're memory-mapped and
# don't need padding.
# * Correct the use dependencies in the ansi series.
# * Hand-translate more XENIX capabilities.
# * Added hpterm entry for HP's X terminal emulator.
# * Added aixterm entries.
# * Shortened four names so everything fits in 14 chars.
#
# 9.11.0 (Thu Nov 2 17:29:35 EST 1995):
# * Added ibcs2 entry and info on iBCS2 standard.
# * Corrected hpa/vpa in linux entry. They still fail the worm test.
# * We can handle the HP meml/memu capability now.
# * Added smacs to klone entries, just as documentation.
# * Carrected ansi.sys and cit-500 entries.
# * Added z39, vt320-k311, v220c, and avatar entries.
# * Make pcansi use the ansi.sys invis capability.
# * Added DIP switch descriptions for vt100, adm31, tvi910, tvi920c,
# tvi925, tvi950, dt80, ncr7900i, h19.
# * X3.64 has been withdrawn, change some references.
# * Removed function keys from ansi-m entry.
# * Corrected ansi.sys entry.
# * Freeze for ncurses-1.9.7 release.
# 9.11.1 (Tue Nov 6 18:18:38 EST 1995):
# * Added rmam/smam capabilities to many entries based on init strings.
# * Added correct hpa/vpa to linux.
# * Reduced several entries relative to vt52.
# 9.11.2 (Tue Nov 7 00:21:06 EST 1995):
# * Exiled some utterly unidentifiable custom and homebrew types to the
# UFO file; also, obsolete small-screen hardware; also, entries which
# look flat-out incorrect, garbled, or redundant. These include the
# following entries: carlock, cdc456tst, microkit, qdss, ramtek, tec,
# tec400, tec500, ubell, wind, wind16, wind40, wind50, plasma, agile,
# apple, bch, daleblit, nucterm, ttywilliams, nuterminal, nu24, bnu,
# fnu, nunix-30, nunix-61, exidy, ex3000, sexidy, pc52, sanyo55,
# yterm10, yterm11, yterm10nat, aed, aed-ucb, compucolor, compucolor2,
# vic20, dg1, act5s, netx, smartvid, smarterm, sol, sol2, dt200,
# trs80, trs100, trs200, trs600, xitex, rsvidtx, vid, att2300-x40,
# att2350-x40, att4410-nfk, att5410-ns, otty5410, att5425-nl-w,
# tty5425-fk, tty5425-w-fk, cita, c108-na, c108-rv-na, c100-rv-na,
# c108-na-acs, c108-rv-na-acs, ims950-ns, infotonKAS, ncr7900i-na,
# regent60na, scanset-n, tvi921-g, tvi925n, tvi925vbn, tvi925vb,
# vc404-na, vc404-s-na, vt420nam, vt420f-nam, vt420pc-nam, vt510nam,
# vt510pc-nam, vt520nam, vt525nam, xterm25, xterm50, xterm65, xterms.
# * Corrected pcvt25h as suggested by Brian C. Grayson
# <bgrayson@pine.ece.utexas.edu>.
# 9.11.3 (Thu Nov 9 12:14:40 EST 1995):
# * Added kspd=\E[P, kcbt=\E[Z, to linux entry, changed kbs back to ^H.
# * Added kent=\EOM to xterm entry.
#
# 9.11.4 (Fri Nov 10 08:31:35 EST 1995):
# * Corrected gigi entry.
# * Restored cuf/cud1 to xterm, their apparent bugginess was due to
# bad hpa/vpa capabilities.
# * Corrected flash strings to have a uniform delay of .2 sec. No
# more speed-dependent NUL-padding!
# * terminfo capabilities in comments bracketed with <>.
# 9.11.5 (Fri Nov 10 15:35:02 EST 1995):
# * Replaced pcvt with the 3.31 pcvt entries.
# * Freeze for 1.9.7a.
# 9.11.6 (Mon Nov 13 10:20:24 EST 1995):
# * Added emu entry from the X11R6 contrib tape sources.
#
# 9.12.0 (Wed Nov 29 04:22:25 EST 1995):
# * Improved iris-ansi and sun entries.
# * More flash string improvements.
# * Corrected wy160 & wy160 as suggested by Robert Dunn
# * Added dim to at386.
# * Reconciled pc3 and ibmpc3 with the BSDI termcap file. Keith says
# he's ready to start using the termcap generated from this one.
# * Added vt102-w, vt220-w, xterm-bold, wyse-vp, wy75ap, att4424m,
# ln03, lno3-w, h19-g, z29a*, qdss. Made vt200 an alias of vt220.
# * Improved hpterm, apollo consoles, fos, qvt101, tvi924. tvi925,
# att610, att620, att630,
# * Changed hazeltine name prefix from h to hz.
# * Sent t500 to the UFI file.
# * I think we've sucked all the juice out of BSDI's termcap file now.
# * Freeze for ncurses 1.9.8 release
# 9.12.1 (Thu Nov 30 03:14:06 EST 1995)
# * Unfreeze, linux kbs needed to be fixed.
# * Tim Theisen pinned down a bug in the DMD firmware.
# 9.12.2 (Thu Nov 30 19:08:55 EST 1995):
# * Fixes to ansi and klone capabilities (thank you, Aaron Ucko).
# (The broken ones had been shadowed by sgr.)
# 9.12.3 (Thu Dec 7 17:47:22 EST 1995):
# * Added documentation on ECMA-48 standard.
# * New Amiga entry.
# 9.12.4 (Thu Dec 14 04:16:39 EST 1995):
# * More ECMA-48 stuff
# * Corrected typo in minix entry, added pc-minix.
# * Corrected khome/kend in xterm (thank you again, Aaron Ucko).
# * Added rxvt entry.
# * Added 1.3.x color-change capabilities to linux entry.
# 9.12.5 (Tue Dec 19 00:22:10 EST 1995):
# * Corrected rxvt entry khome/kend.
# * Corrected linux color change capabilities.
# * NeXT entries from Dave Wetzel.
# * Cleaned up if and rf file names (all in /usr/share now).
# * Changed linux op capability to avoid screwing up a background color
# pair set by setterm.
# 9.12.6 (Wed Feb 7 16:14:35 EST 1996):
# * Added xterm-sun.
# 9.12.7 (Fri Feb 9 13:27:35 EST 1996):
# * Added visa50.
#
# 9.13.0 (Sun Mar 10 00:13:08 EST 1996):
# * Another sweep through the Shuford archive looking for new info.
# * Added dg100 alias to dg6053 based on a comp.terminals posting.
# * Added st52 from Per Persson.
# * Added eterm from the GNU Emacs 19.30 distribution.
# * Freeze for 1.9.9.
# 9.13.1 (Fri Mar 29 14:06:46 EST 1996):
# * FreeBSD console entries from Andrew Chernov.
# * Removed duplicate Atari st52 name.
# 9.13.2 (Tue May 7 16:10:06 EDT 1996)
# * xterm doesn't actually have ACS_BLOCK.
# * Change klone+color setf/setb to simpler forms that can be
# translated into termcap.
# * Added xterm1.
# * Removed mechanically-generated junk capabilities from cons* entries.
# * Added color support to bsdos.
# 9.13.3 (Thu May 9 10:35:51 EDT 1996):
# * Added Wyse 520 entries from Wm. Randolph Franklin <wrf@ecse.rpi.edu>.
# * Created ecma+color, linux can use it. Also added ech to linux.
# * Teach xterm about more keys. Add Thomas Dickey's 3.1.2E updates.
# * Add descriptions to FreeBSD console entries. Also shorten
# some aliases to <= 14 chars for portability.
# * Added x68k console
# * Added OTbs to several VT-series entries.
# 9.13.4 (Wed May 22 10:54:09 EDT 1996):
# * screen entry update for 3.7.1 from Michael Alan Dorman.
# 9.13.5 (Wed Jun 5 11:22:41 EDT 1996):
# * kterm correction due to Kenji Rikitake.
# * ACS correction in vt320-kll due to Phillippe De Muyter.
# 9.13.6 (Sun Jun 16 15:01:07 EDT 1996):
# * Sun console entry correction from J.T. Conklin.
# * Changed all DEC VT300 and up terminals to use VT300 tab set
# 9.13.7 (Mon Jul 8 20:14:32 EDT 1996):
# * Added smul to linux entry (we never noticed it was missing
# because of sgr!).
# * Added rmln to hp+labels (deduced from other HP entries).
# * Added vt100 acsc capability to vt220, vt340, vt400, d800, dt80-sas,
# pro350, att7300, 5420_2, att4418, att4424, att4426, att505, vt320-k3.
# * Corrected vt220 acsc.
# * The klone+sgr and klone+sgr-dumb entries now use klone+acs;
# this corresponds to reality and helps prevent some tic warnings.
# * Added sgr0 to c101, pcix, vt100-nav, screen2, oldsun, next, altos2,
# hpgeneric, hpansi, hpsub, hp236, hp700-wy, bobcat, dku7003, adm11,
# adm12, adm20, adm21, adm22, adm31, adm36, adm42, pt100, pt200,
# qvt101, tvi910, tvi921, tvi92B, tvi925, tvi950, tvi970, wy30-mc,
# wy50-mc, wy100, wyse-vp, ampex232, regent100, viewpoint, vp90,
# adds980, cit101, cit500, contel300, cs10, dm80, falco, falco-p,
# f1720a, go140, sb1, superbeeic, microb, ibm8512, kt7, ergo4000,
# owl, uts30, dmterm, dt100, dt100, dt110, appleII, apple-videx,
# lisa, trsII, atari, st52, pc-coherent, basis, m2-man, bg2.0, bg1.25,
# dw3, ln03, ims-ansi, graphos, t16, zen30, xtalk, simterm, d800,
# ifmr, v3220, wy100q, tandem653, ibmaed.
# * Added DWK terminal description.
# 9.13.8 (Wed Jul 10 11:45:21 EDT 1996):
# * Many entries now have highlights inherited from adm+sgr.
# * xterm entry now corresponds to XFree86 3.1.2E, with color.
# * xtitle and xtitle-twm enable access to the X status line.
# * Added linux-1.3.6 color palette caps in conventional format.
# * Added adm1178 terminal.
# * Move fos and apollo terminals to obsolete category.
# * Aha! The BRL terminals file told us what the Iris extensions mean.
# * Added, from the BRL termcap file: rt6221, rt6221-w, northstar,
# commodore, cdc721-esc, excel62, osexec. Replaced from the BRL file:
# cit500, adm11.
# 9.13.9 (Mon Jul 15 00:32:51 EDT 1996):
# * Added, from the BRL termcap file: cdc721, cdc721l, cdc752, cdc756,
# aws, awsc, zentec8001, modgraph48, rca vp3301/vp3501, ex155.
# * Corrected, from BRL termcap file: vi50.
# * Better rxvt entry & corrected xterm entries from Thomas Dickey.
# 9.13.10 (Mon Jul 15 12:20:13 EDT 1996):
# * Added from BRL: cit101e & variants, hmod1, vi200, ansi77, att5620-1,
# att5620-s, att5620-s, dg210, aas1901, hz1520, hp9845, osborne
# (old osborne moved to osborne-w), tvi970-vb, tvi970-2p, tvi925-hi,
# tek4105brl, tek4106brl, tek4107brl,tek4109brl, hazel, aepro,
# apple40p, apple80p, appleIIgs, apple2e, apple2e-p, apple-ae.
# * Paired-attribute fixes to various terminals.
# * Sun entry corrections from A. Lukyanov & Gert-Jan Vons.
# * xterm entry corrections from Thomas Dickey.
# 9.13.11 (Tue Jul 30 16:42:58 EDT 1996):
# * Added t916 entry, translated from a termcap in SCO's support area.
# * New qnx entry from Michael Hunter.
# 9.13.12 (Mon Aug 5 14:31:11 EDT 1996):
# * Added hpex2 from Ville Sulko.
# * Fixed a bug that ran the qnx and pcvtXX together.
# 9.13.13 (Fri Aug 9 01:16:17 EDT 1996):
# * Added dtterm entry from Solaris CDE.
# 9.13.14 (Tue Sep 10 15:31:56 EDT 1996):
# * corrected pairs#8 typo in dtterm entry.
# * added tvi9065.
# 9.13.15 (Sun Sep 15 02:47:05 EDT 1996):
# * updated xterm entry to cover 3.1.2E's new features.
# 9.13.16 (Tue Sep 24 12:47:43 EDT 1996):
# * Added new minix entry
# * Removed aliases of the form ^[0-9]* for obsolete terminals.
# * Commented out linux-old, nobody's using pre-1.2 kernels now.
# 9.13.17 (Fri Sep 27 13:25:38 EDT 1996):
# * Added Prism entries and kt7ix.
# * Caution notes about EWAN and tabset files.
# * Changed /usr/lib/tabset -> /usr/share/tabset.
# * Added acsc/rmacs/smacs to vt52.
# 9.13.18 (Mon Oct 28 13:24:59 EST 1996):
# * Merged in Thomas Dickey's reorganization of the xterm entries;
# added technical corrections to avoid warning messages.
# 9.13.19 (Sat Nov 16 16:05:49 EST 1996):
# * Added rmso=\E[27m in Linux entry.
# * Added koi8-r support for Linux console.
# * Replace xterm entries with canonical ones from XFree86 3.2.
# 9.13.20 (Sun Nov 17 23:02:51 EST 1996):
# * Added color_xterm from Jacob Mandelson
# 9.13.21 (Mon Nov 18 12:43:42 EST 1996):
# * Back off the xterm entry to use r6 as a base.
# 9.13.22 (Sat Nov 30 11:51:31 EST 1996):
# * Added dec-vt220 at Adrian Garside's request.
#
#-(original-changelog-1996/12/29-to-1998/02/28-by-TD)---------------------------
#
# 10.1.0 (Sun Dec 29 02:36:31 EST 1996): withdrawn
# * Minor corrections to xterm entries.
# * Replaced EWAN telnet entry.
# * Dropped the reorder script generator. It was a fossil.
# 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
# * Replaced minitel-2 entry.
# * Added MGR, ansi-nt.
# 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
# * Thorsten Lockert added termcap `bs' to a lot of types, working from
# the 4.4BSD Lite2 file.
#
# 10.1.1 (Sat May 3 21:41:27 EDT 1997):
# * Use setaf/setab consistently with SVr4.
# * Remove ech, el1 from cons25w, they do not work in FreeBSD 2.1.5
# 10.1.2 (Sat May 24 21:10:57 EDT 1997)
# * update xterm-xf86-v32 to match XFree86 3.2A (changes F1-F4)
# * add xterm-16color, for XFree86 3.3
# 10.1.3 (Sat May 31 12:21:05 EDT 1997)
# * correct typo in emu
# * correct typo in vt102-w (Robert Wuest)
# * make new entry xterm-xf86-v33, restored xterm-xf86-v32.
# 10.1.4 (Sun Jun 15 08:29:05 EDT 1997)
# * remove ech capability from rxvt (it does the wrong thing)
# 10.1.5 (Sat Jun 28 21:34:36 EDT 1997)
# * remove spurious newlines from several entries (hp+color, wy50,
# wy350, wy370-nk, wy99gt-tek, wy370-tek, ibm3161, tek4205, ctrm,
# gs6300)
# 10.1.6 (Sat Jul 5 15:08:16 EDT 1997)
# * correct rmso capability of wy50-mc
# 10.1.7 (Sat Jul 12 20:05:55 EDT 1997)
# * add cbt to xterm-xf86-v32
# * disentangle some entries from 'xterm', preferring xterm-r6 in case
# 'xterm' is derived from xterm-xf86-v32, which implements ech and
# other capabilities not in xterm-r6.
# * remove alternate character set from kterm entry.
# 10.1.8 (Sat Aug 2 18:43:18 EDT 1997)
# * correct acsc entries for ACS_LANTERN, which is 'i', not 'I'.
# 10.1.9 (Sat Aug 23 17:54:38 EDT 1997)
# * add xterm-8bit entry.
# 10.1.10 (Sat Oct 4 18:17:13 EDT 1997)
# * repair several places where early version of tic replaced \, with \\\,
# * make acsc entries canonical form (sorted, uniq).
# * modify acsc entries for linux, linux-koi8
# * new rxvt entry, from corrected copy of distribution in rxvt 2.21b
# * add color, mouse support to kterm.
# 10.1.11 (Sat Oct 11 14:57:10 EDT 1997)
# * correct wy120 smxon/tbc capabilities which were stuck together.
# 10.1.12 (Sat Oct 18 17:38:41 EDT 1997)
# * add entry for xterm-xf86-v39t
# 10.1.13 (Sat Nov 8 13:43:33 EST 1997)
# * add u8,u9 to sun-il description
# 10.1.14 (Sat Nov 22 19:59:03 EST 1997)
# * add vt220-js, pilot, rbcomm, datapoint entries from esr's 27-jun-97
# version.
# * add hds200 description (Walter Skorski)
# * add EMX 0.9b descriptions
# * correct rmso/smso capabilities in wy30-mc and wy50-mc (Daniel Weaver)
# * rename xhpterm back to hpterm.
# 10.1.15 (Sat Nov 29 19:21:59 EST 1997)
# * change initc in linux-c-nc to use 0..1000 range.
# 10.1.16 (Sat Dec 13 19:41:59 EST 1997)
# * remove hpa/vpa from rxvt, which implements them incorrectly.
# * add sgr0 for rxvt.
# * remove bogus smacs/rmacs from EMX descriptions.
# 10.1.17 (Sat Dec 20 17:54:10 EST 1997)
# * revised entry for att7300
# 10.1.18 (Sat Jan 3 17:58:49 EST 1998)
# * use \0 rather than \200.
# * rename rxvt-color to rxvt to match rxvt 2.4.5 distribution.
# 10.1.19 (Sat Jan 17 14:24:57 EST 1998)
# * change xterm (xterm-xf86-v40), xterm-8bit rs1 to use hard reset.
# * rename xterm-xf86-v39t to xterm-xf86-v40
# * remove bold/underline from sun console entries since they're not
# implemented.
# 10.1.20 (Sat Jan 24 11:02:51 EST 1998)
# * add beterm entry (Fred Fish)
# * add irix-color/xwsh entry.
# * turn ncv off for linux.
# 10.1.21 (Sat Jan 31 17:39:16 EST 1998)
# * set ncv for FreeBSD console (treat colors with reverse specially).
# * remove sgr string from qnx based on report by Xiaodan Tang
# 10.1.22 (Wed Feb 11 18:40:12 EST 1998)
# * remove spurious commas from descriptions
# * correct xterm-8bit to match XFree86 3.9Ad F1-F4.
# 10.1.23 (Sat Feb 28 17:48:38 EST 1998)
# * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
# apparently based on cp-866).
#
#-(replaced-changelog-1998/02/28-by-ESR)----------------------------------------
#
# 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
# * Replaced minitel-2 entry.
# * Added MGR, ansi-nt.
# * Minor corrections to xterm entries.
# * Replaced EWAN telnet entry.
# * Dropped the reorder script generator. It was a fossil.
# 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
# * Thorsten Lockert added termcap `bs' to a lot of types, working from
# the 4.4BSD Lite2 file.
# 9.13.25 (Fri Jun 20 12:33:36 EDT 1997):
# * Added Datapoint 8242, pilot, ansi_psx, rbcomm, vt220js.
# * Updated iris-ansi; corrected vt102-w.
# * Switch base xterm entry to 3.3 level.
# 9.13.26 (Mon Jun 30 22:45:45 EDT 1997)
# * Added basic4.
# * Removed rmir/smir from tv92B.
#
# 10.2.0 (Sat Feb 28 12:47:36 EST 1998):
# * add hds200 description (Walter Skorski)
# * add beterm entry (Fred Fish)
# * add Thomas Dickey's xterm-xf86-v40, xterm-8bit, xterm-16color,
# iris-color entries.
# * add emx entries.
# * Replaced unixpc entry with Benjamin Sittler's corrected version.
# * Replaced xterm/rxvt/emu/syscons entries with Thomas Dickey's
# versions.
# * remove sgr string from qnx based on report by Xiaodan Tang
# * Added u8/u9, removed rmul/smul from sun-il.
# * 4.2 tic displays \0 rather than \200.
# * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
# apparently based on cp-866).
# * Merged in Pavel Roskin's acsc for linux-koi8
# * Corrected some erroneous \\'s to \.
# * 4.2 ncurses has been changed to use setaf/setab, consistent w/SysV.
# * II -> ii in pcvtXX, screen, xterm.
# * Removed \n chars following ANSI escapes in sgr & friends.
# * Updated Wyse entries.
# * h19 corrections from Tim Pierce.
# * Noted that the dm2500 has both ich and smir.
# * added pccons for the Alpha under OSF/1.
# * Added Sony NEWS workstation entries and cit101e-rv.
# * Reverted `amiga'; to Kent Polk's version, as I'm told
# the Verkuil entry messes up with Amiga Telnet.
# 10.2.1 (Sun Mar 8 18:32:04 EST 1998):
# * Corrected attributions in 10.2.0 release notes.
# * Scanned the Shuford archive for new terminfos and information.
# * Removed sgr from qnx entry (Thomas Dickey).
# * Added entries for ICL and Kokusai Data Systems terminals.
# * Incorporated NCR terminfos from the Boundless Technology FTP site.
# * Incorporated att700 from the Boundless Technology FTP site.
# * Miscellaneous contact-address and Web-page updates.
#
#-(changelog-beginning-ncurses-4.2)---------------------------------------------
#
# 1998/5/9
# * add nxterm and xterm-color terminfo description (request by Cristian
# Gafton <gafton@redhat.com>).
# * modify rxvt terminfo description to clear alternate screen before
# switching back to normal screen, for compatibility with applications
# which use xterm (reported by Manoj Kasichainula <manojk@io.com>).
# * modify linux terminfo description to reset color palette (reported
# by Telford Tendys <telford@eng.uts.edu.au>).
#
# 1998/7/4
# * merge changes from current XFree86 xterm terminfo descriptions.
#
# 1998/7/25
# * Added minitel1 entries from Alexander Montaron.
# * Added qnxt2 from Federico Bianchi.
# * Added arm100 terminfo entries from Dave Millen.
#
# 1998/8/6
# * Added ncsa telnet entries from Francesco Potorti
#
# 1998/8/15
# * modify ncsa telnet entry to reflect color, other capabilities based on
# examination of the source code - T.Dickey.
#
# 1998/8/22
# * Corrected some erroneous \\'s to \ (eterm, osborne) - TD.
#
# 1998/8/29
# * Added Francesco Potorti's tuned Wyse 99 entries.
# * dtterm enacs correction from Alexander V. Lukyanov.
# * Add ncsa-ns, ncsa-m-ns and ncsa-m entries from esr version.
# * correct a typo in icl6404 entry.
# * add xtermm and xtermc
#
# 1998/9/26
# * format most %'char' sequences to %{number}
# * adapt IBM AIX 3.2.5 terminfo - T.Dickey
# * merge Data General terminfo from Hasufin <hasufin@vidnet.net> - TD
#
# 1998/10/10
# * update xterm-xfree86 to current (patch 84), for is2/rs2 changes - TD
# * correct initialization string in xterm-r5, add misc other features
# to correspond with xterm patch 84 - TD
#
# 1998/12/19
# * update xterm-xfree86 to current (patch 90), smcur/rmcur changes - TD
# * add Mathew Vernon's mach console entries
# * corrections for ncsa function-keys (report by Larry Virden)
#
# 1998/12/19
# * change linux to use ncv#2, since underline does not work with color - TD
#
# 1999/1/9
# * add kbt to iris-ansi, document other shift/control functionkeys - TD
# * correct iris-ansi and iris-ansi-ap with respect to normal vs keypad
# application modes, change kent to use the correct keypad code - TD
#
# 1999/1/10
# * add entry for Tera Term - TD
#
# 1999/1/23
# * minor improvements for teraterm entry - TD
# * rename several entries used by BSDI: bsdos to bsdos-pc-nobold,
# and bsdos-bold to bsdos-pc (Jeffrey C Honig)
#
# 1999/2/20
# * resolve ambiguity of kend/kll/kslt and khome/kfnd/kich1 strings in
# xterm and ncsa entries by removing the unneeded ones. Note that
# some entries will return kend & khome versus kslt and kfnd, for
# PC-style keyboards versus strict vt220 compatiblity - TD
#
# 1999/3/13
# * adjust xterm-xfree86 khome/kend to match default PC-style keyboard
# tables - TD
# * add 'crt' entry - TD
# * correct typos in 'linux-c' entry - TD
#
# 1999/3/14
# * update entries for BSD/OS console to use klone+sgr and klone+color
# (Jeffrey C Honig)
#
# 1999/3/27
# * adjust xterm-xfree86 miscellaneous keypad keys, as per patch #94 - TD.
#
# 1999/4/10
# * add linux-lat, from RedHat patches to ncurses 4.2
#
# 1999/4/17
# * add complete set of default function-key definitions for scoansi - TD.
#
# 1999/7/3
# * add cnorm, cvvis for Linux 2.2 kernels
#
# 1999/7/24
# * add kmous to xterm-r5 -TD
# * correct entries xterm+sl and xterm+sl-twm, which were missing the
# parent "use" clause -TD
#
# 1999/7/31
# * corrected cnorm, added el1 in 'screen' description -TD
#
# 1999/8/14
# * add ms-vt100 -TD
#
# 1999/8/21
# * corrections to beterm entry -TD
#
# 1999/8/28
# * add cygwin entry -TD
#
# 1999/9/4
# * minor corrections for beterm entry -TD
#
# 1999/9/18
# * add acsc string to HP 70092 terminfo entry -Joerg Wunsch
#
# 1999/9/25
# * add amiga-8bit entry
# * add console entries from NetBSD: ofcons, wsvt25, wsvt25m, rcons,
# rcons-color, based on
# ftp://ftp.netbsd.org/pub/NetBSD/NetBSD-current/src/share/termcap/termcap.src
# * add alias for iris-ansi-net
#
# 1999/10/2
# * corrected scoansi entry's acsc, some function keys, add color -TD
#
# 1999/10/23
# * add cnorm, cvvis to cons25w, and modify ncv to add 'dim' -TD
# * reorder ncsa entries to make ncsa-vt220 use the alternate function
# key mapping, leaving Potorti's entries more like he named them -TD
# * remove enter/exit am-mode from cygwin -TD
#
# 1999/10/30
# * correct typos in several entries (missing '[' from CSI):
# mgr-sun, ncsa-m, vt320-k3, att505, avt-ns, as well as smir/rmir
# strings for avt-ns -TD
# * add 'dim' to ncv mask for linux (report by Klaus Weide).
#
# 1999/11/27
# * correct kf1-kf4 in xterm-r6 which were vt100-style PF1-PF4 -TD
# * add hts to xterm-r6, and u6-u9 to xterm-r5 -TD
# * add xterm-88color and xterm-256color -TD
#
# 1999/12/4
# * add "obsolete" termcap strings -TD
# * add kvt and gnome entries -TD
#
# 1999/12/11
# * correct cup string for regent100 -TD
#
# 2000/1/1
# * update mach, add mach-color based on Debian diffs for ncurses 5.0 -TD
# * add entries for xterm-hp, xterm-vt220, xterm-vt52 and xterm-noapp -TD
# * change OTrs capabilities to rs2 -TD
# * add obsolete and extended capabilities to 'screen' -TD
#
# 2000/1/5
# * remove kf0 from rxvt, vt520, vt525 and ibm5151 since it conflicts
# with kf10 -TD
# * updated xterm-xf86-v40, making kdch1 correspond to vt220 'Remove',
# and adding kcbt -TD
#
# 2000/1/12
# * remove incorrect khome/kend from xterm-xf86-v333, which was based on
# nonstandard resource settings -TD
#
# 2000/2/26
# * minor fixes for xterm-*, based on Debian #58530 -TD
#
# 2000/3/4
# * add several terminal types from esr's "11.0", as well as comments.
# bq300*, dku7102-old, dku7202, hft, lft, pcmw, pmcons, tws*, vip*,
# vt220-8bit, vt220-old, wy85-8bit
#
# 2000/3/18
# * add several terminal types from esr's "11.0.1" (ansi-*).
# * update OTxx capabilities for changes on 2000/3/4.
# * revert part of vt220 change (request by Todd C Miller for OpenBSD)
#
# 2000/3/26
# * move screen's AX extension to ecma+color, modify several entries to
# use that, adjusting ncv as needed -TD
#
# 2000/4/8
# * add bsdos-pc-m, bsdos-pc-mono (Jeffrey C Honig)
# * correct spelling error in entry name: bq300-rv was given as bg300-rv
# in esr's version.
#
# 2000/4/15
# * add cud, ech, etc., to beterm based on feedback from Rico Tudor -TD
# * correct color definition for ibm3164, make minor changes to other
# IBM terminal definitions based on recent terminfo descriptions -TD
#
# 2000/4/22
# * add mgterm, from NetBSD -TD
# * add alias sun-cgsix for sun-ss5 as per NetBSD
# * change cons25w to use rs2 for reset rather than rs1 -TD
# * add rc/sc to aixterm based on manpage -TD
#
# 2000/5/13
# * remove ncv from xterm-16color, xterm-256color
#
# 2000/6/10
# * add kmous capability to linux to use Joerg Schoen's gpm patch.
#
# 2000/7/1
# * add Eterm (Michael Jennings)
#
# 2000-07-18
# * add amiga-vnc entry.
#
# 2000-08-12
# * correct description of Top Gun Telnet.
# * add kterm-color
#
# 2000-08-26
# * add qansi* entries from QNX ftp site.
#
# 2000-09-16
# * add Matrix Orbital entries by Eric Z. Ayers).
# * add xterm-basic, xterm-sco entries, update related entries to XFree86
# 4.0.1c -TD
#
# 2000-09-17
# * add S0, E0 extensions to screen's entry -TD
#
# 2000-09-23
# * several corrections based on tic's new parameter-checking code -TD
# * modify xterm-r6 and similar rs2 sequences which had \E7...\E8
# bracketing sequences that reset video attributes (\E8 would restore
# them) -TD
#
# 2000-11-11
# * rename cygwin to cygwinB19, adapt newer entry from Earnie Boyd -TD
#
# 2000-12-16
# * improved scoansi, based on SCO man-page, and testing console,
# scoterm with tack -TD
#
# 2001-01-27
# * modify kterm to use acsc via SCS controls.
#
# 2001-02-10
# * screen 3.9.8 allows xterm mouse controls to pass-through
#
# 2001-03-11
# * remove spurious "%|" from some xterm entries.
#
# 2001-03-31
# * modify 'screen' khome/kend to match screen 3.09.08
# * add examples of 'screen' customization (screen.xterm-xfree86,
# screen.xterm-r6, screen.teraterm) -TD
#
# 2001-04-14
# * correct definitions of shifted editing keys for xterm-xfree86 -TD
# * add "Apple_Terminal" entries -Benjamin Sittler
# * remove time-delays from "Apple_Terminal" entries -TD
# * make sgr entries time-delays consistent with individual caps -TD
#
# 2001-05-05
# * corrected/updated screen.xterm-xfree86
#
# 2001-05-19
# * ELKS descriptions, from Federico Bianchi
# * add u6 (CSR) to Eterm (Michael Jennings).
#
# 2001-07-21
# * renamed "Apple_Terminal" entries to "nsterm" to work with Solaris's
# tic which handles names no longer than 14 characters. Add
# corresponding descriptions for the Darwin PowerPC console named
# "xnuppc" -Benjamin Sittler
#
# 2001-09-01
# * change kbs in mach entries to ^? (Marcus Brinkmann).
#
# 2001-11-17
# * add "putty" entry -TD
# * updated "Apple_Terminal" entries -Benjamin Sittler
#
# 2001-11-24
# * add ms-vt100-color entry -TD
# * add "konsole" entries -TD
#
# 2001-12-08
# * update gnome entry to Redhat 7.2 -TD
#
# 2002-05-25
# * add kf13-kf48 strings to cons25w -TD
# * add pcvt25-color entry -TD
# * changed a few /usr/lib/tabset -> /usr/share/tabset.
# * improve some features of scoansi entry based on SCO's version -TD
# * add scoansi-new entry corresponding to OpenServer 5.0.6
#
# 2002-06-15
# * add kcbt to screen entry -TD
#
# 2002-06-22
# * add rxvt-16color, ibm+16color, mvterm entries -TD
#
# 2002-09-28
# * split out linux-basic entry, making linux-c inherit from that, and
# in turn linux (with cnorm, etc) inherit from linux-c-nc to reflect
# the history of this console type -TD
# * scaled the linux-c terminfo entry to match linux-c-nc, i.e., the
# r/g/b parameters of initc are in the range 0 to 1000 -TD
#
# 2002-10-05
# * minor fix for scale-factor of linux-c and linux-c-nc -TD
#
# 2002-11-09
# * split-out vt100+keypad and vt220+keypad, fix interchanged ka3/kb2
# in the latter -TD
#
# 2002-11-16
# * add entries for mterm (mterm, mterm-ansi, decansi) -TD
# * ncr260wy350pp has only 16 color pairs -TD
# * add sun-type4 from NetBSD -TD
# * update xterm-xfree86 to current (patch 170) -TD
# * add screen-bce, screen-s entries -TD
# * add xterm-1002, xterm-1003 entries -TD
#
# 2003-01-11
# * update homepage for Top Gun Telnet/SSH
#
# 2003-01-25
# * reduce duplication in emx entries, added emx-base -TD
#
# 2003-05-24
# * corrected acs for screen.teraterm -TD
# * add tkterm entry -TD
#
# 2003-07-15
# * cygwin changes from Charles Wilson:
# misc/terminfo.src (nxterm|xterm-color): make xterm-color
# primary instead of nxterm, to match XFree86's xterm.terminfo
# usage and to prevent circular links.
# (rxvt): add additional codes from rxvt.org.
# (rxvt-color): new alias
# (rxvt-xpm): new alias
# (rxvt-cygwin): like rxvt, but with special acsc codes.
# (rxvt-cygwin-native): ditto. rxvt may be run under XWindows, or
# with a "native" MSWin GUI. Each takes different acsc codes,
# which are both different from the "normal" rxvt's acsc.
# (cygwin): cygwin-in-cmd.exe window. Lots of fixes.
# (cygwinDBG): ditto.
#
# 2003-09-27
# * update gnome terminal entries -TD
#
# 2003-10-04
# * add entries for djgpp 2.03 and 2.04 -TD
#
# 2003-10-25
# * add alias for vtnt -TD
# * update xterm-xfree86 for XFree86 4.4 -TD
#
# 2003-11-22
# * add linux-vt (Andrey V Lukyanov)
#
# 2003-12-20
# * add screen.linux -TD
#
# 2004-01-10
# * revised/improved entries for tvi912b, tvi920b (Benjamin Sittler)
#
# 2004-01-17
# * add OpenNT/Interix/SFU entries (Federico Bianchi)
# * add vt100+ and vt-utf8 entries -TD
# * add uwin entry -TD
#
# 2004-03-27
# * add sgr strings to several common entries lacking them, e.g.,
# screen, to make the entries more portable -TD
# * remove cvvis from rxvt entry, since it is the same as cnorm -TD
# * similar fixups for cvvis/cnorm various entries -TD
#
# 2004-05-22
# * remove 'ncv' from xterm-256color (patch 188) -TD
#
# 2004-06-26
# * add mlterm -TD
# * add xterm-xf86-v44 -TD
# * modify xterm-new aka xterm-xfree86 to accommodate luit, which relies
# on G1 being used via an ISO-2022 escape sequence (report by
# Juliusz Chroboczek) -TD
# * add 'hurd' entry -TD
#
# 2004-07-03
# * make xterm-xf86-v43 derived from xterm-xf86-v40 rather than
# xterm-basic -TD
# * align with xterm #192's use of xterm-new -TD
# * update xterm-new and xterm-8bit for cvvis/cnorm strings -TD
# * make xterm-new the default "xterm" -TD
#
# 2004-07-10
# * minor fixes for emu -TD
# * add emu-220
# * add rmam/smam to linux (Trevor Van Bremen)
# * change wyse acsc strings to use 'i' map rather than 'I' -TD
# * fixes for avatar0 -TD
# * fixes for vp3a+ -TD
#
# 2004-07-17
# * add xterm-pc-fkeys -TD
# * review/update gnome and gnome-rh90 entries (prompted by
# Redhat Bugzilla #122815) -TD
# * review/update konsole entries -TD
# * add sgr, correct sgr0 for kterm and mlterm -TD
# * correct tsl string in kterm -TD
#
# 2004-07-24
# * make ncsa-m rmacs/smacs consistent with sgr -TD
# * add sgr, rc/sc and ech to syscons entries -TD
# * add function-keys to decansi -TD
# * add sgr to mterm-ansi -TD
# * add sgr, civis, cnorm to emu -TD
# * correct/simplify cup in addrinfo -TD
# * corrections for gnome and konsole entries
# (Redhat Bugzilla #122815) -Hans de Goede
# * modify DEC entries (vt220, etc), to add sgr string, and to use
# ISO-2022 strings for rmacs/smacs -TD
#
# 2004-07-31
# * rename xterm-pc-fkeys to xterm+pcfkeys -TD
#
# 2004-08-07
# * improved putty entry -Robert de Bath
#
# 2004-08-14
# * remove dch/dch1 from rxvt because they are implemented inconsistently
# with the common usage of bce/ech -TD
# * remove khome from vt220 (vt220's have no home key) -TD
# * add rxvt+pcfkeys -TD
#
# 2004-08-21
# * modify several entries to ensure xterm mouse and cursor visibility
# are reset in rs2 string: hurd, putty, gnome, konsole-base, mlterm,
# Eterm, screen. (The xterm entries are left alone - old ones for
# compatibility, and the new ones do not require this change) -TD
#
# 2004-08-28
# * add morphos entry -Pavel Fedin
# * modify amiga-8bit to add khome/kend/knp/kpp -Pavel Fedin
# * corrected \E[5?l to \E[?5l in vt320 entries -TD
#
# 2004-11-20
# * update wsvt25 entry -TD
#
# 2005-01-29
# * update pairs for xterm-88color and xterm-256color to reflect the
# ncurses extended-color support -TD
#
# 2005-02-26
# * modify sgr/sgr0 in xterm-new to improve tgetent's derived "me" -TD
# * add aixterm-16color to demonstrate 16-color capability -TD
#
# 2005-04-23
# * add media-copy to vt100 -TD
# * corrected acsc string for vt52 -TD
#
# 2005-04-30
# * add kUP, kDN (user-defined shifted up/down arrow) definitions for
# xterm-new -TD
# * add kUP5, kUP6, etc., for xterm-new and rxvt -TD
#
# 2005-05-07
# * re-corrected acsc string for vt52 -TD
#
# 2005-05-28
# * corrected sun-il sgr string which referred to bold and underline -TD
# * add sun-color entry -TD
#
# 2005-07-23
# * modify sgr0 in several entries to reset alternate-charset as in the
# sgr string -TD
# * modify sgr string of prism9 to better match the individual
# attributes -TD
#
# 2005-10-15
# * correct order of use= in rxvt-basic -TD
#
# 2005-10-26
# * use kind/kri as shifted up/down cursor keys for xterm-new -TD
#
# 2005-11-12
# * other minor fixes to cygwin based on tack -TD
# * correct smacs in cygwin (report by Baurzhan Ismagulov).
#
# 2006-02-18
# * add nsterm-16color entry -TD
# * remove ncv flag from xterm-16color -TD
# * remove setf/setb from xterm-256color to match xterm #209 -TD
# * update mlterm entry to 2.9.2 -TD
#
# 2006-02-25
# * fixes to make nsterm-16color match report
# by Christian Ebert -Alain Bench
#
# 2006-04-22
# * add xterm+256color building block -TD
# * add gnome-256color, putty-256color, rxvt-256color -TD
#
# 2006-05-06
# * add hpterm-color -TD
#
# 2006-06-24
# * add xterm+pcc0, xterm+pcc1, xterm+pcc2, xterm+pcc3 -TD
# * add gnome-fc5 (prompted by GenToo #122566) -TD
# * remove obsolete/misleading comments about kcbt on Linux -Alain Bench
# * improve xterm-256color by combining the ibm+16color setaf/setab
# strings with SGR 48. The setf/setb strings also are cancelled here
# rather than omitted so derived entries will cancel those also -Alain
# Bench
#
# 2006-07-01
# * add some notes regarding copyright to terminfo.src -TD
# * use rxvt+pcfkeys in Eterm -TD
# * remove km and flash from gnome, Eterm and rxvt since they do not work
# as one would expect (km sends ESC rather than setting the 8th bit
# of the key) -TD
# * add/use ansi+enq, vt100+enq and vt102+enq -TD
# * add konsole-solaris -TD
#
# 2006-07-22
# * update xterm-sun and xterm-sco entries to match xterm #216 -TD
# * modify is2/rs2 strings for xterm-r6 as per fix in xterm #148 -TD
# * modify xterm-24 to inherit from "xterm" -TD
# * add xiterm entry -TD
# * add putty-vt100 entry -TD
# * corrected spelling of Michael A Dorman's name, prompted by
# http://www.advogato.org/person/mdorman/diary.html -TD
#
# 2006-08-05
# * add xterm+pcf0, xterm+pcf2 from xterm #216 -TD
# * update xterm+pcfkeys to match xterm #216 -TD
#
# 2006-08-17
# * make descriptions of xterm entries consistent with its terminfo -TD
#
# 2006-08-26
# * add xfce, mgt -TD
#
# 2006-09-02
# * correct acsc string in kterm -TD
#
# 2006-09-09
# * add kon entry -TD
# * remove invis from linux and related entries, add klone+sgr8 for those
# that implement the feature (or have not been shown to lack it) -TD
#
# 2006-09-23
# * add ka2, kb1, kb3, kc2 to vt220-keypad as an extension -TD
# * minor improvements to rxvt+pcfkeys -TD
#
# 2006-09-30
# * fix a few typos in if/then/else expressions -TD
#
# 2006-10-07
# * add several GNU Screen variations with 16- and 256-colors, and
# status line (Alain Bench).
#
# 2007-03-03
# * add Newbury Data entries (Jean-Charles Billaud).
#
# 2007-06-10
# * corrected xterm+pcf2 modifiers for F1-F4, match xterm #226 -TD
#
# 2007-07-14
# * restore section of pre-ncurses-4.2 changelog to fix attribution -TD
# * add konsole-256color entry -TD
#
# 2007-08-18
# * add 9term entry (request by Juhapekka Tolvanen) -TD
#
# 2007-10-13
# * correct kIC in rxvt+pcfkeys (prompted by Debian #446444) -TD
# * add shift-control- and control-modified keys for rxvt editing
# keypad -TD
# * update mlterm entry to 2.9.3 -TD
# * add mlterm+pcfkeys -TD
#
# 2007-10-20
# * move kLFT, kRIT, kind and kri capabilities from xterm-new to
# xterm+pcc0, etc., to make the corresponding building blocks reflect
# xterm's capabilities -TD
# * add mrxvt entry -TD
# * add xterm+r6f2, use in mlterm and mrxvt entries -TD
#
# 2007-11-03
# * correct acsc strings for h19 and z100 (Benjamin Sittler)
#
# 2007-11-11
# * use xterm-xf86-v44 for "xterm-xfree86", reflecting changes to
# xterm starting with patch #216 -TD
# * make legacy xterm entries such as xterm-24 inherit from xterm-old,
# to match xterm #230 -TD
# * extend xterm+pccX entries to match xterm #230 -TD
# * add xterm+app, xterm+noapp, from xterm #230 -TD
# * add/use xterm+pce2 from xterm #230, in xterm+pcfkeys -TD
#
# 2008-04-19
# * add screen.rxvt -TD
#
# 2008-04-28
# * add screen+fkeys (prompted by Debian #478094) -TD
#
# 2008-06-28
# * add screen.mlterm -TD
# * improve mlterm and mlterm+pcfkeys -TD
#
# 2008-08-23
# * add Eterm-256color, Eterm-88color -TD
# * add rxvt-88color -TD
#
# 2008-10-12
# * add teraterm4.59 entry, use that as primary teraterm entry, rename
# original to teraterm2.3 -TD
# * update "gnome" to 2.22.3 -TD
# * update "konsole" to 1.6.6 -TD
# * add "aterm" -TD
# * add "linux2.6.26" -TD
#
# 2008-11-15
# * change several \E[2g (clear tab at current column) to \E[3g
# (clear all tabs) to match definition for tbc capability -TD
#
# 2008-11-29
# * add eterm-color -TD
#
# 2009-01-10
# * add screen.Eterm -TD
#
# 2009-03-28
# * correct typo in pfkey of ansi.sys-old
# (report by Kalle Olavi Niemitalo)
# * move function- and cursor-keys from emx-base to ansi.sys, and create
# a pfkey capability which handles F1-F48 -TD
#
# 2009-05-02
# * add vwmterm entry (Bryan Christ)
#
# 2009-09-19
# * change ncv and op capabilities in sun-color to match Sun's entry for
# this (report by Laszlo Peter)
# * improve interix smso by using reverse rather than bold (report by
# Kristof Zelechovski).
#
# 2009-10-03
# * remove unnecessary kcan assignment to ^C from putty (Sven Joachim)
# * add linux-16color (Benjamin Sittler)
# * correct initc capability of linux-c-nc end-of-range (Benjamin Sittler)
# * similar change for dg+ccc and dgunix+ccc (Benjamin Sittler)
# * add ccc and initc capabilities to xterm-16color -TD
#
# 2009-10-31
# * updated nsterm* entries (Benjamin Sittler, prompted by GenToo #206201)
#
# 2009-12-12
# * updated nsterm* entries (Benjamin Sittler, Emanuele Giaquinta)
#
# 2009-12-12
# * add bw (auto-left-margin) to nsterm* entries (Benjamin Sittler)
# * rename minix to minix-1.7, add minix entry for Minux3 -TD
#
# 2009-12-26
# * add bterm (bogl 0.1.18) -TD
# * minor fix to rxvt+pcfkeys -TD
#
# 2010-02-06
# * update mrxvt to 0.5.4, add mrxvt-256color -TD
#
# 2010-02-13
# * add several screen-bce.XXX entries -TD
#
# 2010-02-23
# * modify screen-bce.XXX entries to exclude ech, since screen's color
# model does not clear with color for that feature -TD
#
# 2010-03-20
# * rename atari and st52 to atari-old, st52-old, use newer entries from
# FreeMiNT by Guido Flohr (from patch/report by Alan Hourihane).
#
# 2010-06-12
# * add mlterm+256color entry -TD
#
# 2010-07-17
# * add hard-reset for rs2 to wsvt25 to help ensure that reset ends
# the alternate character set (patch by Nicholas Marriott)
#
# 2010-08-28
# * improve acsc for vt52 (Benjamin Sittler)
# * modify nsterm entries for consistent sgr/sgr0 -TD
# * modify xnuppc entries for consistent sgr/sgr0 -TD
# * add invis to tek4115 sgr -TD
#
# 2010-09-11
# * reformat acsc strings to canonical format -TD
#
# 2010-09-25
# * add "XT" capability to entries for terminals that support both
# xterm-style mouse- and title-controls, for "screen" which
# special-cases TERM beginning with "xterm" or "rxvt" -TD
#
# 2010-10-02
# * fill in no-parameter forms of cursor-movement where a parameterized
# form is available -TD
# * fill in missing cursor controls where the form of the controls is
# ANSI -TD
# * add parameterized cursor-controls to linux-basic (report by Dae) -TD
#
# 2010-10-09
# * correct comparison used for setting 16-colors in linux-16color
# entry (Novell #644831) -TD
# * improve linux-16color entry, using "dim" for color-8 which makes it
# gray rather than black like color-0 -TD
#
# 2010-11-20
# * make "vte" the principal entry defining "gnome", since GNOME terminal
# is merely one of several terminals whose behavior is provided by this
# library -TD
#
# 2010-11-27
# * fix typo in rmso for tek4106 -Goran Weinholt
#
# 2010-12-11
# * suppress ncv in screen entry, allowing underline -Alejandro R. Sedeno
# * also suppress ncv in konsole-base -TD
#
# 2011-02-05
# * add U8 feature to denote entries for terminal emulators which do not
# support VT100 SI/SO when processing UTF-8 encoding -TD
# * add xterm-utf8 as a demo of the U8 feature -TD
#
# 2011-02-20
# * add cons25-debian entry (Brian M Carlson, Debian #607662).
#
# 2011-06-11
# * update minix entry to minix 3.2 (Thomas Cort).
#
# 2011-07-09
# * fix inconsistent tabset path in pcmw (Todd C. Miller).
# * remove a backslash which continued comment, obscuring altos3
# definition with OpenBSD toolset (Nicholas Marriott).
#
# 2011-07-16
# * add/use xterm+tmux chunk from xterm #271 -TD
# * resync xterm-new entry from xterm #271 -TD
# * add E3 extended capability to linux-basic (Miroslav Lichvar)
# * add linux2.2, linux2.6, linux3.0 entries to give context for E3 -TD
# * add SI/SO change to linux2.6 entry (Debian #515609) -TD
#
# 2011-07-21
# * add kich1 to sun (Yuri Pankov)
# * use bold rather than reverse for smso in sun-color (Yuri Pankov).
#
# 2011-08-06
# * corrected k9 in dg460-ansi, add other features based on manuals -TD
#
# 2011-08-20
# * minor cleanup of X-terminal emulator section -TD
# * add terminator entry -TD
# * add simpleterm entry -TD
#
######## SHANTIH! SHANTIH! SHANTIH!
# generated by ncurses 5.9.20110813 tic
# using options -Ktx
# from terminfo.src revision 1.399