#
# CDDL HEADER START
#
# The contents of this file are subject to the terms of the
# Common Development and Distribution License (the "License").
# You may not use this file except in compliance with the License.
#
# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
# See the License for the specific language governing permissions
# and limitations under the License.
#
# When distributing Covered Code, include this CDDL HEADER in each
# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
# If applicable, add the following below this CDDL HEADER, with the
# fields enclosed by brackets "[]" replaced with your own identifying
# information: Portions Copyright [yyyy] [name of copyright owner]
#
# CDDL HEADER END
#
#
# Copyright (c) 1996, 2010, Oracle and/or its affiliates. All rights reserved.
#
@ _START_
# Message file for cmd/sgs/liblddbg.
@ MSG_ID_LIBLDDBG
# Usage messages
@ MSG_USE_UNRECOG "warning: unrecognized debug option (try help): %s"
@ MSG_USE_CNTNEGOPT "warning: ignoring non-negatable debug option: %s"
@ MSG_USE_HDR_DCT "Display Control Tokens:"
@ MSG_USE_HDR_CST "Category Selection Tokens:"
@ MSG_USE_HDR_BOTH " [ld and ld.so.1]"
@ MSG_USE_HDR_RTLD " [ld.so.1 only]"
@ MSG_USE_HDR_LD " [ld only]"
# TRANSLATION_NOTE - Use the following output in the C locale as reference 1.
#
# The runtime linker and link-editor support a shared debugging
# facility. Options are selected via a comma separated list of tokens,
# each of which specifies a display option or a category for which
# information is desired. Many tokens apply to both linker components,
# while some are specific to one or the other. Diagnostics are printed,
# one per line, with a standard prefix prepended to each one. Diagnostic
# output is sent to stderr unless otherwise redirected.
# TRANSLATION_NOTE - The next series of messages makes the above output in C
# locale.
@ MSG_USE_R1_A "The runtime linker and link-editor support a \
shared debugging"
@ MSG_USE_R1_B "facility. Options are selected via a comma separated list \
of tokens,"
@ MSG_USE_R1_C "each of which specifies a display option or a category \
for which"
@ MSG_USE_R1_D "information is desired. Many tokens apply to both linker \
components,"
@ MSG_USE_R1_E "while some are specific to one or the other. Diagnostics \
are printed,"
@ MSG_USE_R1_F "one per line, with a standard prefix prepended to each one. \
Diagnostic"
# TRANSLATION_NOTE -- do not translate "stderr"
@ MSG_USE_R1_G "output is sent to stderr unless otherwise redirected."
# TRANSLATION_NOTE - End of reference 1
# TRANSLATION_NOTE - Use the following output in the C locale as reference 2.
#
# Runtime Linking (ld.so.1):
# Diagnostics that trace the runtime linking of an application
# can be enabled via the LD_DEBUG environment variable:
# LD_DEBUG=token1,token2 app ...
# In addition to the "output" token described below, diagnostic
# output from the runtime linker can be redirected to an output
# file using the additional environment variable:
# LD_DEBUG_OUTPUT=file
# If the "output" token and LD_DEBUG_OUTPUT are both specified,
# the file specified by LD_DEBUG_OUTPUT is used. If LD_DEBUG_OUTPUT
# is used, the output file name is suffixed with the process id.
# An output file specified via the "output" token is used as
# specified, without a process id suffix. Use of the "output"
# token with programs that call fork() results in each process
# writing debug output to the same file. The debug output will be
# jumbled and incomplete. LD_DEBUG_OUTPUT should be used in such
# cases to direct debug output for each process to a unique file.
#
# All runtime linker diagnostics are prepended with the process
# id. If thread capabilities are enabled for the process, the
# thread id is also shown. All Solaris applications are thread
# capable, and a single threaded application may use threads via
# the libraries it links to. Diagnostics from such applications
# reference thread id 1.
# TRANSLATION_NOTE - The next series of messages makes the above output in C
# locale.
@ MSG_USE_R2_A "Runtime Linking (ld.so.1):"
@ MSG_USE_R2_B " Diagnostics that trace the runtime linking \
of an application"
# TRANSLATION_NOTE -- do not translate "LD_DEBUG"
@ MSG_USE_R2_C " can be enabled via the LD_DEBUG environment variable:"
# TRANSLATION_NOTE -- do not translate "LD_DEBUG"
@ MSG_USE_R2_D " LD_DEBUG=token1,token2 app ..."
# TRANSLATION_NOTE -- do not translate "output"
@ MSG_USE_R2_E " In addition to the \"output\" token described \
below, diagnostic"
@ MSG_USE_R2_F " output from the runtime linker can be redirected to \
an output"
@ MSG_USE_R2_G " file using the additional environment variable:"
# TRANSLATION_NOTE -- do not translate "LD_DEBUG_OUTPUT"
@ MSG_USE_R2_H " LD_DEBUG_OUTPUT=file"
# TRANSLATION_NOTE -- do not translate "output" or "LD_DEBUG_OUTPUT"
@ MSG_USE_R2_I " If the \"output\" token and LD_DEBUG_OUTPUT are \
both specified,"
# TRANSLATION_NOTE -- do not translate "LD_DEBUG_OUTPUT"
@ MSG_USE_R2_J " the file specified by LD_DEBUG_OUTPUT is used. \
If LD_DEBUG_OUTPUT"
@ MSG_USE_R2_K " is used, the output file name is suffixed with \
the process id."
# TRANSLATION_NOTE -- do not translate "output"
@ MSG_USE_R2_L " An output file specified via the \"output\" token \
is used as"
# TRANSLATION_NOTE -- do not translate "output"
@ MSG_USE_R2_M " specified, without a process id suffix. Use \
of the \"output\""
# TRANSLATION_NOTE -- do not translate "fork"
@ MSG_USE_R2_N " token with programs that call fork() results in \
each process"
@ MSG_USE_R2_O " writing debug output to the same file. The debug \
output will be"
@ MSG_USE_R2_P " jumbled and incomplete. LD_DEBUG_OUTPUT should be \
used in such"
@ MSG_USE_R2_Q " cases to direct debug output for each process to \
a unique file."
@ MSG_USE_R2_R " All runtime linker diagnostics are prepended with \
the process"
@ MSG_USE_R2_S " id. If thread capabilities are enabled for the \
process, the"
@ MSG_USE_R2_T " thread id is also shown. All Solaris applications are \
thread"
@ MSG_USE_R2_U " capable, and a single threaded application may \
use threads via"
@ MSG_USE_R2_V " the libraries it links to. Diagnostics from such \
applications"
@ MSG_USE_R2_W " reference thread id 1."
# TRANSLATION_NOTE - End of reference 2
# TRANSLATION_NOTE - Use the following output in the C locale as reference 3.
#
# Link-Editing (ld):
# Diagnostics that trace the link-editing of an application are
# enabled using the -D option:
# ld -Dtoken1,token2 -o prog ...
# As compiler drivers may assign -D a different meaning, the
# LD_OPTIONS environment variable is often used:
# LD_OPTIONS=-Dtoken1,token2 cc -o prog ...
#
# The position of -D on the link-edit command line is significant.
# Diagnostics are enabled when a debug token is first encountered,
# and can be switched off by prepending the token with "!".
#
# Diagnostic output can be directed to a file using the "output"
# token, The output file is used as specified, without a process
# id suffix.
#
# All link-editor diagnostics are prepended with the string "debug".
#
# TRANSLATION_NOTE - The next series of messages makes the above output in C
# locale.
@ MSG_USE_R3_A " Link-Editing (ld):"
@ MSG_USE_R3_B " Diagnostics that trace the link-editing of an \
application are"
@ MSG_USE_R3_C " enabled using the -D option:"
@ MSG_USE_R3_D " ld -Dtoken1,token2 -o prog ..."
@ MSG_USE_R3_E " As compiler drivers may assign -D a different meaning, the"
# TRANSLATION_NOTE -- do not translate "LD_OPTIONS"
@ MSG_USE_R3_F " LD_OPTIONS environment variable is often used:"
# TRANSLATION_NOTE -- do not translate "LD_OPTIONS"
@ MSG_USE_R3_G " LD_OPTIONS=-Dtoken1,token2 cc -o prog ..."
@ MSG_USE_R3_H " The position of -D on the link-edit command line \
is significant."
@ MSG_USE_R3_I " Diagnostics are enabled when a debug token is \
first encountered,"
@ MSG_USE_R3_J " and can be switched off by prepending the token \
with \"!\"."
# TRANSLATION_NOTE -- do not translate "output"
@ MSG_USE_R3_K " Diagnostic output can be directed to a file using \
the \"output\""
@ MSG_USE_R3_L " token, The output file is used as specified, \
without a process"
@ MSG_USE_R3_M " id suffix."
# TRANSLATION_NOTE -- do not translate "debug"
@ MSG_USE_R3_N " All link-editor diagnostics are prepended with the \
string \"debug\"."
# TRANSLATION_NOTE - End of reference 3
# TRANSLATION_NOTE - Use the following output in the C locale as reference 4.
#
# demangle show C++ symbol names in their demangled form
# detail provide more information in conjunction with
# other options
# dtime prepend a time delta to diagnostics. The value
# appears as seconds.fraction, and represents
# the elapsed time since that last diagnostic.
# long display long object names without truncation
# output=file debug output is sent to the named file
# instead of stderr. If file is empty (\"\"),
# following output will be sent to stderr.
# ttime prepend a time stamp to diagnostics. The value
# appears as seconds.fraction, and represents
# the time since entering ld or ld.so.1.
# Note, all diagnostics induce a probe affect,
# which should be taken into account when
# interpreting dtime and ttime information.
#
# TRANSLATION_NOTE - The next series of messages makes the above output in C
# locale.
# TRANSLATION_NOTE -- do not translate the first token "demangle".
@ MSG_USE_R4_A " demangle show C++ symbol names in their \
demangled form"
# TRANSLATION_NOTE -- do not translate the first token "detail".
@ MSG_USE_R4_B " detail provide more information in \
conjunction with"
@ MSG_USE_R4_B2 " other options"
# TRANSLATION_NOTE -- do not translate the first token "dtime".
@ MSG_USE_R4_C " dtime prepend a time delta to diagnostics. \
The value"
@ MSG_USE_R4_C2 " appears as seconds.fraction, and \
represents"
@ MSG_USE_R4_C3 " the elapsed time since that last \
diagnostic."
# TRANSLATION_NOTE -- do not translate the first token "long".
@ MSG_USE_R4_D " long display long object names without \
truncation"
# TRANSLATION_NOTE -- do not translate the first token "output".
@ MSG_USE_R4_E " output=file debug output is sent to the \
named file"
@ MSG_USE_R4_E2 " instead of stderr. If file is \
empty (\"\"),"
@ MSG_USE_R4_E3 " following output will be \
sent to stderr."
# TRANSLATION_NOTE -- do not translate the first token "ttime".
@ MSG_USE_R4_F " ttime prepend a time stamp to diagnostics. \
The value"
@ MSG_USE_R4_F2 " appears as seconds.fraction, and \
represents"
@ MSG_USE_R4_F3 " the time since entering ld or \
@ MSG_USE_R4_F4 " Note all diagnostics induce a \
probe affect,"
@ MSG_USE_R4_F5 " which should be taken into \
account when"
@ MSG_USE_R4_F6 " interpreting dtime and ttime \
information."
# TRANSLATION_NOTE - End of reference 4
# TRANSLATION_NOTE - Use the following output in the C locale as reference 5.
#
# lmid[=name] prepend link-map list id to diagnostics, and
# optionally filter the lists: By default,
# diagnostics are produced for all link-map
# lists except that of the runtime linker
# (ldso), without identification. "lmid" causes
# the link-map list id to be prepended.
# "name" limits diagnostics to the named
# link-map list. Additional "lmid" tokens
# can specify multiple link-map lists.
# Valid names are:
# all all link-map lists except ldso
# alt all alternative link-map lists
# alt[0-9]+ specific alternative link-map list
# base the base, or main, link-map list
# ldso the runtime linker link-map list
#
# TRANSLATION_NOTE - The next series of messages makes the above output in C
# locale.
# TRANSLATION_NOTE -- do not translate the first token "lmid".
@ MSG_USE_R5_A " lmid[=name] prepend link-map list id to \
diagnostics, and"
@ MSG_USE_R5_A2 " optionally filter the lists: By \
default,"
@ MSG_USE_R5_A3 " diagnostics are produced for all \
link-map"
@ MSG_USE_R5_A4 " lists except that of the runtime \
linker"
@ MSG_USE_R5_A5 " (ldso), without identification. \
\"lmid\" causes"
# TRANSLATION_NOTE -- do not translate "name"
@ MSG_USE_R5_A6 " the link-map list id to be prepended."
@ MSG_USE_R5_A7 " \"name\" limits diagnostics to the \
named"
@ MSG_USE_R5_A8 " link-map list. Additional \"lmid\" \
tokens"
@ MSG_USE_R5_A9 " can specify multiple link-map \
lists."
@ MSG_USE_R5_A0 " Valid names are:"
# TRANSLATION_NOTE -- do not translate the token "all".
@ MSG_USE_R5_B " all all link-map lists \
except ldso"
# TRANSLATION_NOTE -- do not translate the token "alt".
@ MSG_USE_R5_C " alt all alternative \
link-map lists"
# TRANSLATION_NOTE -- do not translate the token "alt".
@ MSG_USE_R5_D " alt[0-9]+ specific alt \
link-map list"
# TRANSLATION_NOTE -- do not translate the token "base".
@ MSG_USE_R5_E " base base (main) \
link-map list"
@ MSG_USE_R5_F " ldso runtime linker \
link-map list "
# TRANSLATION_NOTE - End of reference 5
# TRANSLATION_NOTE - Use the following output in the C locale as reference 6.
#
# name prepend output file basename to diagnostics
# fullname prepend full output file name to diagnostics
# class prepend output file elfclass (32/64) to
# diagnostics
#
# TRANSLATION_NOTE - The next series of messages makes the above output in C
# locale.
# TRANSLATION_NOTE -- do not translate the first token "name".
@ MSG_USE_R6_A " name prepend output file basename \
to diagnostics"
# TRANSLATION_NOTE -- do not translate the first token "fullname".
@ MSG_USE_R6_B " fullname prepend full output file name \
to diagnostics"
# TRANSLATION_NOTE -- do not translate the first token "class".
@ MSG_USE_R6_C " class prepend output file elfclass \
(32/64) to"
@ MSG_USE_R6_C2 " diagnostics"
# TRANSLATION_NOTE - End of reference 6
# TRANSLATION_NOTE - Use the following output in the C locale as reference 7.
#
# all display information for all categories
# basic basic trace information/warnings
# cap platform/machine/hardware/software capabilities
# files input file processing (files and libraries)
# help this help message
# libs library search paths; detail flag shows
# actual library lookup (-l) processing
# move move sections
# reloc relocations
# symbols symbol tables; detail flag shows internal
# symbol table addition and resolution (ld only)
# tls thread local storage (TLS)
# unused unused/unreferenced files; detail flag
# shows unused sections (ld only)
# versions ELF versioning
# TRANSLATION_NOTE - The next series of messages makes the above output in C
# locale.
# TRANSLATION_NOTE -- do not translate the first token "all".
@ MSG_USE_R7_A " all display information for \
all categories"
# TRANSLATION_NOTE -- do not translate the first token "basic".
@ MSG_USE_R7_B " basic basic trace information/warnings"
# TRANSLATION_NOTE -- do not translate the first token "cap".
@ MSG_USE_R7_C " cap platform/machine/hardware/software \
capabilities"
# TRANSLATION_NOTE -- do not translate the first token "files".
@ MSG_USE_R7_D " files input file processing (files \
and libraries)"
# TRANSLATION_NOTE -- do not translate the first token "help".
@ MSG_USE_R7_E " help this help message"
# TRANSLATION_NOTE -- do not translate the first token "libs".
@ MSG_USE_R7_F " libs library search paths; detail \
flag shows"
@ MSG_USE_R7_F2 " actual library lookup (-l) \
processing"
# TRANSLATION_NOTE -- do not translate the first token "move".
@ MSG_USE_R7_G " move move sections"
# TRANSLATION_NOTE -- do not translate the first token "reloc".
@ MSG_USE_R7_H " reloc relocations"
# TRANSLATION_NOTE -- do not translate the first token "symbols".
@ MSG_USE_R7_I " symbols symbol tables; detail flag shows \
internal"
@ MSG_USE_R7_I2 " symbol table addition/resolution \
(ld only)"
# TRANSLATION_NOTE -- do not translate the first token "tls".
@ MSG_USE_R7_J " tls thread local storage (TLS)"
# TRANSLATION_NOTE -- do not translate the first token "unused".
@ MSG_USE_R7_K " unused unused/unreferenced files; \
detail flag"
@ MSG_USE_R7_K2 " shows unused sections (ld only)"
# TRANSLATION_NOTE -- do not translate the first token "versions".
@ MSG_USE_R7_L " versions ELF versioning"
# TRANSLATION_NOTE - End of reference 7
# TRANSLATION_NOTE - Use the following output in the C locale as reference 8.
#
# audit runtime link-audit processing
# bindings symbol binding; detail flag shows
# absolute:relative addresses
# callback user supplied code executed by ld.so.1
# (i.e. dl_iterate_phdr)
# init init and fini processing
# TRANSLATION_NOTE - The next series of messages makes the above output in C
# locale.
# TRANSLATION_NOTE -- do not translate the first token "audit".
@ MSG_USE_R8_A " audit runtime link-audit processing"
# TRANSLATION_NOTE -- do not translate the first token "bindings".
@ MSG_USE_R8_B " bindings symbol binding; detail flag shows"
@ MSG_USE_R8_B2 " absolute:relative addresses"
# TRANSLATION_NOTE -- do not translate the first token "dl".
@ MSG_USE_R8_C " dl user calls to the dl*() family"
# TRANSLATION_NOTE -- do not translate the first token "init".
@ MSG_USE_R8_D " init init and fini processing"
# TRANSLATION_NOTE - End of reference 8
# TRANSLATION_NOTE - Use the following output in the C locale as reference 9.
#
# args input arguments
# entry entrance criteria descriptors
# got GOT symbol information
# map mapfile processing
# sections input sections
# segments output segments and address/offset processing;
# detail flag shows associated sections
# statistics symbol table and relocation statistics
# strtab string table compression statistics;
# detail flag shows layout of string tables
# support support libraries
# TRANSLATION_NOTE - The next series of messages makes the above output in C
# locale.
# TRANSLATION_NOTE -- do not translate the first token "args".
@ MSG_USE_R9_A " args input arguments"
# TRANSLATION_NOTE -- do not translate the first token "entry".
@ MSG_USE_R9_B " entry entrance criteria descriptors"
# TRANSLATION_NOTE -- do not translate the first token "got".
@ MSG_USE_R9_C " got GOT symbol information"
# TRANSLATION_NOTE -- do not translate the first token "map".
@ MSG_USE_R9_D " map mapfile processing"
# TRANSLATION_NOTE -- do not translate the first token "sections".
@ MSG_USE_R9_E " sections input sections"
# TRANSLATION_NOTE -- do not translate the first token "segments".
@ MSG_USE_R9_F " segments output segments and address/offset \
processing;"
@ MSG_USE_R9_F2 " detail flag shows associated \
sections"
# TRANSLATION_NOTE -- do not translate the first token "statistics".
@ MSG_USE_R9_G " statistics symbol table and relocation \
statistics"
# TRANSLATION_NOTE -- do not translate the first token "strtab".
@ MSG_USE_R9_H " strtab string table compression statistics;"
@ MSG_USE_R9_H2 " detail flag shows layout of \
string tables"
# TRANSLATION_NOTE -- do not translate the first token "support".
@ MSG_USE_R9_I " support support libraries"
# TRANSLATION_NOTE - End of reference 9
# Basic processing (ld).
@ MSG_BASIC_COLLECT "collect relocations"
@ MSG_BASIC_CREATE "create output image"
@ MSG_BASIC_FILES "process files"
@ MSG_BASIC_FINISHED "processing finished"
@ MSG_BASIC_OPTIONS "process options"
@ MSG_BASIC_RELOCATE "relocate output image"
@ MSG_BASIC_VALIDATE "validating symbols"
# Argument messages
@ MSG_ARG_OPTION "arg[%d]\toption=-%c"
@ MSG_ARG_OPTARG "arg[%d]\toption=-%c: option-argument: %s"
@ MSG_ARG_STR2CHR "arg[%d]\toption=-%s: translated: new option=-%c"
@ MSG_ARG_WLDEL "arg[%d]\toption=-W%s: translated: prefix -Wl,: \
removed"
@ MSG_ARG_FILE "arg[%d]\tfile=%s"
@ MSG_ARG_NG_UNKNOWN "warning: unrecognized -z guidance item: %s"
# Bindings messages
# NOTE: these are used by appcert(1) and lari(1), use care when changing.
@ MSG_BND_BASIC "binding file=%s to file=%s: symbol '%s'"
@ MSG_BND_PLT "binding file=%s (%#llx:%#llx) at plt[%lld]:%s to \
file=%s (%#llx:%#llx): symbol '%s'%s"
@ MSG_BND_DLSYM "binding file=%s (dlsym) to file=%s \
(%#llx:%#llx): symbol '%s'%s"
@ MSG_BND_DEFAULT "binding file=%s (%#llx:%#llx) to file=%s \
(%#llx:%#llx): symbol '%s'%s"
@ MSG_BND_WEAK_1 "binding file=%s to 0x0 (undefined weak): symbol '%s'"
@ MSG_BND_WEAK_2 "binding file=%s (%#llx:%#llx) to 0x0 \
(undefined weak): symbol '%s'"
# NOTE: the rejected message is used by lari(1), use care when changing. This
# message is formatted to conform to the pattern used by the MSG_BINFO messages.
@ MSG_BND_REJECT "binding file=%s to file=%s: symbol '%s' \
(rejected: %s)"
@ MSG_BNDREJ_DIRECT "attempt to directly bind to a NODIRECT definition"
@ MSG_BNDREJ_GROUP "attempt to bind within a group to a NODIRECT \
definition"
@ MSG_BNDREJ_SINGLE "attempt to bind to a SINGLETON definition without \
following default search model"
@ MSG_BND_PLTPAD_TO " pltpad: %#llx: file=%s bound to file=%s: \
symbol '%s'"
@ MSG_BND_PLTPAD_FROM " pltpad: %#llx: bound from file=%s: symbol '%s'"
@ MSG_BND_PSUM_SPARCV9 "Summary of PLT types bound: 21d=%d, 24d=%d, u32=%d, \
u44=%d, full=%d, far=%d, Total=%d"
@ MSG_BND_PSUM_SPARC "Summary of PLT types bound: 21d=%d, 24d=%d, \
full=%d, Total=%d"
@ MSG_BND_PSUM_DEFAULT "Summary of PLT types bound: total=%d"
# Relocation messages
@ MSG_REL_GENERATE "generating input relocations: section=%s"
@ MSG_REL_COLLECT "collecting input relocations: section=%s, file=%s"
@ MSG_REL_ACTIVE "performing active relocations"
@ MSG_REL_CREATING "creating output relocations"
@ MSG_REL_START "relocation processing: file=%s%s"
@ MSG_REL_FINISH "relocation processing: file=%s; finished%s"
@ MSG_REL_NONE "relocation processing: file=%s%s; nothing to do"
@ MSG_REL_PLT " (plt processing only)"
@ MSG_REL_FAIL " (failed)"
@ MSG_REL_BADROFFSET "<offset lies outside memory image; \
relocation discarded>"
@ MSG_REL_TRANSITION "relocation: %s: section=%s; input from file=%s; \
offset=0x%llx; symbol=%s; transitioned to: %s"
@ MSG_REL_DISCARDED "relocation against discarded section=%s from file=%s; \
relocation type=%s offset=0x%llx; relocation discarded"
@ MSG_REL_COPY "copy data from file=%s to file=%s: symbol '%s'%s"
@ MSG_REL_SLOPPYCOMDAT "the following relocation references a discarded \
section; relocation redirected to section %s in \
file %s"
# Entrance criteria messages
@ MSG_ECR_TITLE "Segment Entrance Criteria Descriptor List"
@ MSG_ECR_DESC "entrance descriptor[%u]"
# Elf Data (section) messages
# TRANSLATION_NOTE - the following two entries provide for a series of one or
# more standard 32-bit Elf_Data entries that align with the initial title.
@ MSG_EDATA_TITLE_32 " addr type size offset al file"
@ MSG_EDATA_ENTRY_32 " %3s %#10llx %-5s %#10llx %#8llx %2lld %s %s%s"
# TRANSLATION_NOTE - the following two entries provide for a series of one or
# more standard 64-bit Elf_Data entries that align with the initial title.
@ MSG_EDATA_TITLE_64 " addr type \
size offset al file"
@ MSG_EDATA_ENTRY_64 " %3s %#18llx %-5s %#18llx %#16llx %2lld %s %s%s"
@ MSG_EDATA_IGNSCN " (section ignored)"
# File messages
@ MSG_FIL_BASIC "file=%s [ %s ]"
@ MSG_FIL_ARCHIVE "file=%s [ archive ] %s"
@ MSG_FIL_SKIP_1 "file=%s; skipped: already processed as %s"
@ MSG_FIL_SKIP_2 "file=%s; skipped: already processed"
@ MSG_FIL_REUSE "file=%s; reusing: originally processed as %s"
@ MSG_FIL_PROT "file=%s; modifying memory protections (%c PROT_WRITE)"
@ MSG_FIL_DELETE "file=%s; deleting"
@ MSG_FIL_CLEANUP "file=%s; loading failed: cleaning up lmco 0x%llx"
@ MSG_FIL_LAZYLOAD "file=%s; lazy loading from file=%s: symbol=%s"
@ MSG_FIL_PRELOAD "file=%s; preloading"
@ MSG_FIL_NEEDED "file=%s; needed by %s"
@ MSG_FIL_FILTER_1 "file=%s; filter for %s (configuration definition)"
@ MSG_FIL_FILTER_2 "file=%s; filter for %s"
@ MSG_FIL_FILTEE_2 "file=%s; filtee processing failed"
@ MSG_FIL_FILTEE_3 "file=%s; filtee skipped (auditor directed)"
@ MSG_FIL_FIXNAME "file=%s; required name=%s"
@ MSG_FIL_PROMOTE "file=%s; promoting mode to %s"
@ MSG_FIL_DEFERRED "file=%s; deferred dependency exchanged for file=%s"
@ MSG_FIL_AOUT "file=%s [ AOUT ]; generating link map"
@ MSG_FIL_ELF "file=%s [ ELF ]; generating link map%s"
@ MSG_FIL_LDSO "file=%s [ ELF ]"
# NOTE: these are used by lari(1), use care when changing.
@ MSG_FIL_ANALYZE "file=%s; analyzing %s"
@ MSG_FIL_FILTEE_1 "file=%s; filtered by %s"
@ MSG_FIL_CONFIG "file=%s [ ELF ]; configuration alternate found: %s"
@ MSG_FIL_DATA_AS " addr: %#18llx size: %#18llx"
@ MSG_FIL_DATA_LL " lmid: %18.18s lmco: %#18llx"
@ MSG_FIL_DATA_EA " envp: %#18llx auxv: %#18llx"
@ MSG_FIL_MMAPOBJ "file=%s mmapobj entries=%d"
@ MSG_FIL_MMAPOBJ_1 " [%d]: addr: %#18llx fsize: %#18llx %s"
@ MSG_FIL_MMAPOBJ_2 " offset: %#17llx msize: %#18llx"
@ MSG_FIL_BND_ADD "file=%s; add binding to:"
@ MSG_FIL_BND_FILE " file=%s %s"
@ MSG_FIL_DEP_TITLE "processing %s dependencies %s:"
@ MSG_FIL_DEP_NONE " file=%s; has no dependencies"
@ MSG_FIL_DEP_ENT " file=%s; depends on:"
@ MSG_FIL_DEP_ADD " file=%s; object added %s %s"
@ MSG_FIL_DEP_UPDATE " file=%s; object updated %s %s"
@ MSG_FIL_DEP_DELETE " file=%s; object deleting %s"
@ MSG_FIL_DEP_REMOVE " file=%s; object removed from handle %s"
@ MSG_FIL_DEP_REMAIN " file=%s; object must remain on handle %s"
@ MSG_FIL_DEP_ORPHAN " file=%s; object remains on orphan handle %s"
@ MSG_FIL_DEP_REINST " file=%s; object reinstated %s"
@ MSG_FIL_HDL_CREATE "handle=%s; creating %s 0x%llx:"
@ MSG_FIL_HDL_ADD "handle=%s; adding dependent objects %s:"
@ MSG_FIL_HDL_DELETE "handle=%s; inspecting for deletion:"
@ MSG_FIL_HDL_ORPHAN "handle=%s; deletion cannot be completed: moving to \
orphan list:"
@ MSG_FIL_HDL_REINST "handle=%s; reinstating from orphan list:"
@ MSG_FIL_HDL_COLLECT "handle=%s; collected for possible removal %s"
@ MSG_FIL_HDL_RETAIN "handle=%s; externally referenced from %s: handle \
retained"
@ MSG_FIL_DEL_RESCAN "pending deletions; rescanning orphan list for \
available deletions"
@ MSG_FIL_AR_RESCAN "rescanning archives from args[%d-%d]; additional \
members may satisfy prior extractions"
@ MSG_FIL_CONFIG_ERR "configuration file=%s: %s"
@ MSG_FIL_CONFIG_ERR_1 "ignored (configuration building)"
@ MSG_FIL_CONFIG_ERR_2 "invalid version"
@ MSG_FIL_CONFIG_ERR_3 "unable to process file"
@ MSG_FIL_CONFIG_ERR_4 "corrupt or truncated file"
@ MSG_FIL_CONFIG_ERR_5 "incompatible ELF class, byte order, or machine \
architecture"
@ MSG_FIL_MODIFIED "file=%s; open modified by support library: %s"
@ MSG_FIL_NAMECHANGE " name changed to: %s"
@ MSG_FIL_FDCHANGE " file descriptor changed from: %d to: %d %s"
@ MSG_FIL_ELFCHANGE " ELF descriptor changed from: 0x%llx to: 0x%llx %s"
@ MSG_FIL_IGNORE " (file will be ignored)"
@ MSG_CNTL_TITLE "control list processing complete: moving lmco 0x%llx \
to lmco 0x%llx"
@ MSG_REJ_MACH "file=%s; rejected: wrong machine type: %s"
@ MSG_REJ_CLASS "file=%s; rejected: wrong ELF class: %s"
@ MSG_REJ_DATA "file=%s; rejected: wrong ELF data format: %s"
@ MSG_REJ_TYPE "file=%s; rejected: bad ELF type: %s"
@ MSG_REJ_BADFLAG "file=%s; rejected: bad ELF flags value: %s"
@ MSG_REJ_MISFLAG "file=%s; rejected: mismatched ELF flags value: %s"
@ MSG_REJ_VERSION "file=%s; rejected: mismatched ELF/lib version: %s"
@ MSG_REJ_HAL "file=%s; rejected: HAL R1 extensions required"
@ MSG_REJ_US3 "file=%s; rejected: Sun UltraSPARC III extensions \
required"
@ MSG_REJ_STR "obj=%s; rejected: %s"
@ MSG_REJ_UNKFILE "obj=%s; rejected: unknown file type"
@ MSG_REJ_UNKCAP "obj=%s; rejected: unknown capability: %d"
@ MSG_REJ_HWCAP_1 "obj=%s; rejected: hardware capability (CA_SUNW_HW_1) \
unsupported: %s"
@ MSG_REJ_SFCAP_1 "obj=%s; rejected: software capability (CA_SUNW_SF_1) \
unsupported: %s"
@ MSG_REJ_MACHCAP "obj=%s; rejected: machine capability (CA_SUNW_MACH) \
unsupported: %s"
@ MSG_REJ_PLATCAP "obj=%s; rejected: platform capability (CA_SUNW_PLAT) \
unsupported: %s"
@ MSG_REJ_HWCAP_2 "obj=%s; rejected: hardware capability (CA_SUNW_HW_2) \
unsupported: %s"
# Libs messages
@ MSG_LIB_INITPATH "Library Search Paths (initial)"
@ MSG_LIB_UPPATH "Library Search Paths (-L updated)"
@ MSG_LIB_LOPT "find lib=-l%s; path=%s"
@ MSG_LIB_REQUIRED "find lib=%s; path=%s (required by %s)"
@ MSG_LIB_LDLIBPATH " search path=%s (LD_LIBRARY_PATH)"
@ MSG_LIB_LDLIBPATHC " search path=%s (configuration LD_LIBRARY_PATH - %s)"
@ MSG_LIB_RUNPATH " search path=%s (RUNPATH/RPATH from file %s)"
@ MSG_LIB_DEFAULT " search path=%s (default)"
@ MSG_LIB_DEFAULTC " search path=%s (configuration default - %s)"
@ MSG_LIB_TDEFAULT " search path=%s (trusted default)"
@ MSG_LIB_TDEFAULTC " search path=%s (trusted configuration default - %s)"
@ MSG_LIB_LIBPATH " search path=%s (LIBPATH or -YP)"
@ MSG_LIB_YPATH " search path=%s replaces path=%s (-Y%c)"
@ MSG_LIB_FIND "find object=%s; searching"
@ MSG_LIB_TRYING " trying path=%s%s"
@ MSG_LIB_ALTER " trying path=%s (auditor returned alternative)"
@ MSG_LIB_SKIP " skip path=%s (auditor directed)"
@ MSG_LIB_IGNORE " ignore path=%s (insecure directory name)"
@ MSG_LIB_INUSE " use path=%s (implicitly secure, as directory \
has already provided dependencies)"
# Mapfile messages
@ MSG_MAP_MAPFILE "mapfile=%s; version=%d (%s)"
@ MSG_MAP_SEG "segment directive; line=%llu; %s"
@ MSG_MAP_SEG_ORDER "segment order directive; line=%llu; list_cnt=%lld; %s"
@ MSG_MAP_CAP "capability directive; line=%llu"
@ MSG_MAP_EC "entrance criteria; line=%llu; added"
@ MSG_MAP_OS_ORDER "output section ordering; line=%llu; segment=%s \
section=%s; index=%d"
@ MSG_MAP_HDR_NOALLOC "header noalloc directive; line=%llu; first loadable \
segment will not contain ELF and program headers"
@ MSG_MAP_SYM_SCOPE "symbol scope definition"
@ MSG_MAP_SYM_SIZE "size-symbol directive; line=%llu; segment=%s; \
symbol=%s; %s"
@ MSG_MAP_SYM_VER_1 "%s, %s; symbol=%s (%s)"
@ MSG_MAP_SYM_VER_2 "%s; symbol=%s (%s)"
@ MSG_MAP_DV "depend versions directive; line=%llu, object=%s"
@ MSG_MAP_DV_ENTRY "%12.12s %s; line=%llu"
@ MSG_MAP_SORT_TITLE "mapfile additions: segment sorting required"
@ MSG_MAP_SORT_TITLE_O "before:"
@ MSG_MAP_SORT_TITLE_S "after:"
@ MSG_MAP_POST_TITLE "mapfile post processing"
@ MSG_MAP_ENT_ORD_TITLE "set entrance criteria input section sort keys; \
segment=%s"
@ MSG_MAP_ID_ADD "%s: %lld: enter conditional expression id: %s"
@ MSG_MAP_ID_CLEAR "%s: %lld: delete conditional expression id: %s"
@ MSG_MAP_PASS "%s: %lld: input enabled by %s"
@ MSG_MAP_NOPASS "%s: %lld: input disabled by %s"
# Move messages
@ MSG_MOVE_FILE "file=%s processing move data"
@ MSG_MOVE_TITLE1 " i/o offset size repeat stride \
value with respect to"
@ MSG_MOVE_TITLE2 " i/o address size repeat stride \
value with respect to"
@ MSG_MOVE_ENTRYIN " in %#10llx %6d %6d %6d %#16llx %s"
@ MSG_MOVE_ENTRYOUT " out %#10llx %6d %6d %6d %#16llx %s"
@ MSG_MOVE_EXPAND " %#10llx %#16llx (expanded)"
@ MSG_MOVE_ADJEXPAND "for symbol=%s roffset: new=0x%llx"
@ MSG_MOVE_ADJMOVE "for symbol=%s roffset: from=0x%llx, to=0x%llx"
@ MSG_MOVE_OUTSCTADJ "adjusting addend for symbol=%s"
@ MSG_MOVE_PAREXPN "expanding symbol=%s into .data: %s"
@ MSG_MOVE_OUTMOVE "copying move entries for symbol=%s into .SUNW_move"
@ MSG_MOVE_INPUT "collecting move entries: file=%s"
@ MSG_MOVE_BAD "move %lld offset invalid: %s: offset=0x%llx \
lies outside memory image; move discarded"
# Section header messages
@ MSG_SHD_MODIFIED "section=%s; section header modified by support \
library: %s"
@ MSG_SHD_ORIG " original:"
@ MSG_SHD_NEW " new:"
# TRANSLATION_NOTE - The following two items are used following a number in
# the MSG_SHD_OFFSET_ENT_XX format strings below. For example "1 entry"
# or "23 entries".
#
@ MSG_SHD_ENTRY_1 "entry"
@ MSG_SHD_ENTRY_N "entries"
# Section messages
@ MSG_SEC_BACKING "mapfile symbol definitions: create backing storage:"
@ MSG_SEC_INPUT "section=%s; input from file=%s"
@ MSG_SEC_INPUT_GEN "section=%s"
@ MSG_SEC_INPUT_GENSTR "section=%s; input generated merged string section"
@ MSG_SEC_ADDED "section=%s; added to segment=%s"
@ MSG_SEC_CREATED "section=%s; added to segment=%s (created)"
@ MSG_SEC_REDIRECTED "section=%s; redirected to section=%s"
@ MSG_SEC_DISCARDED "section=%s; input from file=%s; \
discarded in favor of section=%s; file=%s"
@ MSG_SEC_GNU_COMDAT_1 "section=%s; identified as COMDAT with \
relaxed relocations enabled"
@ MSG_SEC_GNU_COMDAT_2 "section=%s; identified as COMDAT"
@ MSG_SEC_GNU_COMDAT_3 "section=%s; relaxed relocations enabled"
@ MSG_SEC_GRP_DEFINE "section=%s; input from file=%s; defines %s\
group: signature symbol: %s"
@ MSG_SEC_GRP_MEMBER "section=%s; input from file=%s; member of %s\
group: signature symbol: %s"
@ MSG_SEC_GRP_DISCARDED "section=%s; input from file=%s; discarded in \
favor of group: signature symbol: %s: file=%s"
@ MSG_SEC_STRMERGE_DISCARDED "section=%s; input from file=%s; \
discarded in favor of generated merged string section"
@ MSG_SEC_STRMERGE_UNSUP "section=%s; input from file=%s; sh_addralign=%lld; \
sh_entsize=%lld; unable to merge sections with this \
size and alignment"
@ MSG_SEC_STRTAB_STND "strtab=%s; full size: %lld; uncompressed"
@ MSG_SEC_STRTAB_COMP "strtab=%s; full size: %lld; compressed down to: %lld"
@ MSG_SEC_GENSTR_COMP "section=%s (generated merged string section); \
full size: %lld; compressed down to: %lld"
@ MSG_SEC_STRTAB_HD "strtab=%s; compression information [%d buckets]:"
@ MSG_SEC_STRTAB_BCKT " bucket[%d]:"
@ MSG_SEC_STRTAB_MSTR " [%lld] %s <master>"
@ MSG_SEC_STRTAB_SUFSTR " [%lld] %s <suffix of: %s>"
# Unused messages
@ MSG_USD_SEC "section=%s; size=0x%llx; input from file=%s; \
unused: does not satisfy any references%s"
@ MSG_USD_SECDISCARD "; discarded"
@ MSG_USD_FILE "file=%s unused: does not satisfy any references"
@ MSG_USD_NEEDSTR "file=%s unused: unable to determine use"
@ MSG_USD_UNREF "file=%s unreferenced: unused dependency of %s"
@ MSG_USD_FILECYCLIC "file=%s unused: cyclic group [%d] member: \
unreferenced outside of group"
@ MSG_USD_LCINTERFACE "file=%s unused interface [%s]: using interface \
from previously loaded object: file=%s"
@ MSG_USD_LDLIBPATH " search path=%s unused: LD_LIBRARY_PATH entry"
@ MSG_DUP_LDLIBPATH " search path=%s unused: (duplicate) LD_LIBRARY_PATH \
entry"
@ MSG_USD_LDLIBPATHC " search path=%s unused: configuration \
LD_LIBRARY_PATH entry - %s"
@ MSG_DUP_LDLIBPATHC " search path=%s unused: (duplicate) configuration \
LD_LIBRARY_PATH entry - %s"
@ MSG_USD_RUNPATH " search path=%s unused: RUNPATH/RPATH from file %s"
# Segment messages
@ MSG_SEG_DESC_INUSE "Program Header / Segment Descriptor List (in use)"
@ MSG_SEG_DESC_AVAIL "Program Header / Segment Descriptor List (available)"
# Support messages
@ MSG_SUP_REQ "support object request=%s (%s)"
@ MSG_SUP_REQ_ENV "supplied via SGS_SUPPORT"
@ MSG_SUP_REQ_CMD "supplied via -S"
@ MSG_SUP_ROUTINE " support object=%s: provides routine %s"
@ MSG_SUP_CALLING_1 " calling routine=%s (%s)"
@ MSG_SUP_CALLING_2 " calling routine=%s (%s) %s=%s"
@ MSG_SUP_VNONE " unloading object=%s: version=LD_SUP_VNONE"
@ MSG_SUP_OUTFILE "output file"
@ MSG_SUP_INFILE "input file"
@ MSG_SUP_INSEC "input section"
@ MSG_SUP_SEC "section"
# Symbol strings
@ MSG_SYM_AR_FILE "symbol table processing; input file=%s [ archive ] %s"
@ MSG_SYM_AR_SKIP "file=%s, symbol=%s, skipped"
@ MSG_SYM_AR_CHECK "file=%s(%s), symbol=%s, checking for tentative or \
restricted visibility override"
@ MSG_SYM_AR_RESOLVE "file=%s(%s), symbol=%s, resolves undefined or \
tentative symbol"
@ MSG_SYM_AR_FORCE "file=%s(%s), forced extraction"
@ MSG_SYM_SPECIAL "symbol table processing; building special symbols"
@ MSG_SYM_PROCESS "symbol table processing; input file=%s [ %s ]"
@ MSG_SYM_FINAL "symbol table processing; final update"
@ MSG_SYM_INDEX "symbol table processing; determining section \
symbol's index"
@ MSG_SYM_BSS "symbol table processing; assigning to bss \
(possible copy relocations)"
@ MSG_SYM_REDUCED "symbol table processing; reducing global symbols"
@ MSG_SYM_RETAINING "symbol table processing; retaining local symbols"
@ MSG_SYM_VERSION "symbol table processing; adding version symbols"
@ MSG_SYM_CAPABILITIES "symbol table processing; adding local capabilities \
symbols"
@ MSG_SYM_BASIC "symbol[%d]=%s"
@ MSG_SYM_ADDING "symbol[%d]=%s (global); adding"
@ MSG_SYM_SECTION "symbol[%d]=%s (section); segment=%s"
@ MSG_SYM_RESOLVING "symbol[%d]=%s (global); resolving [%d][%d]"
@ MSG_SYM_UPDATE "symbol=%s; updated"
@ MSG_SYM_CREATE "symbol=%s; creating"
@ MSG_SYM_REDUCING "symbol=%s; reducing to local"
@ MSG_SYM_ELIMINATING "symbol=%s; eliminating"
@ MSG_SYM_NOTELIMINATE "symbol=%s; not eliminated: referenced by \
section=%s, entry[%d]"
@ MSG_SYM_DISCARD_SEC "symbol=%s; discarded: originates from unused or \
discarded section=%s from file=%s"
@ MSG_SYM_DISCARD_FILE "symbol=%s; discarded: originates from unused or \
discarded file=%s"
@ MSG_SYM_DISCARD_DUP "symbol[%d]=%s; discarded duplicate: originates from \
file=%s"
@ MSG_SYM_WRAP "symbol[%d]=%s renamed to %s (-z wrap)"
@ MSG_SYM_CAP_ORIG "symbol[%d]=%s converting to symbol capability \
(-z symbolcap)"
@ MSG_SYM_CAP_LOCAL "symbol[%d]=%s creating local capability \
(-z symbolcap)"
@ MSG_SYM_COPY_DST "symbol=%s; copy destination: alignment: 0x%x"
@ MSG_SYM_COPY_REF "symbol=%s; copy reference"
@ MSG_SYM_AOUT "symbol=%s; (original AOUT name)"
@ MSG_SYM_LOOKUP "symbol=%s; lookup in file=%s [ %s ]"
@ MSG_DLSYM_1 "symbol=%s; dlsym() called from file=%s %s %s"
@ MSG_DLSYM_2 "symbol=%s; dlsym() called from file=%s; starting \
at file=%s %s %s"
@ MSG_CAP_SYM_DEFAULT " symbol=%s[%u]: capability family default"
@ MSG_CAP_SYM_USED " symbol=%s[%u]: used"
@ MSG_CAP_SYM_CANDIDATE " symbol=%s[%u]: capability candidate"
@ MSG_CAP_SYM_REJECTED " symbol=%s[%u]: capability rejected"
@ MSG_CAP_SYM_HW_1 " symbol=%s[%u]: capability specific \
(CA_SUNW_HW_1): [ %s ]"
@ MSG_CAP_SYM_SF_1 " symbol=%s[%u]: capability specific \
(CA_SUNW_SF_1): [ %s ]"
@ MSG_CAP_SYM_MACH " symbol=%s[%u]: capability specific \
(CA_SUNW_MACH): [ %s ]"
@ MSG_CAP_SYM_PLAT " symbol=%s[%u]: capability specific \
(CA_SUNW_PLAT): [ %s ]"
@ MSG_CAP_SYM_HW_2 " symbol=%s[%u]: capability specific \
(CA_SUNW_HW_2): [ %s ]"
@ MSG_SYM_LAZY_RESCAN "rescanning for lazy dependencies for symbol: %s"
@ MSG_SYM_DUPSORTADDR "section %s: symbol '%s' and symbol '%s' have the \
same address: %#llx"
@ MSG_SYM_IGNGNUVER "symbol=%s; hash index=%d; version=%d; skipping \
symbol with GNU version hidden bit set in file=%s"
# Syminfo string
@ MSG_SYMINFO_INFO "syminfo information"
# Version strings
@ MSG_VER_AVAIL_1 "version availability: file=%s"
@ MSG_VER_AVAIL_2 " available version selected from"
@ MSG_VER_DEF_TITLE "version definition processing: file=%s"
@ MSG_VER_NEED_TITLE "version needed processing: file=%s"
@ MSG_VER_NOINTERFACE "version definition has no interface symbols: %s"
# SHF_ORDERED related messages. Token used is sections.
@ MSG_ORD_SORT_BEFORE "section=%s; requires output section reordering:"
@ MSG_ORD_SORT_AFTER "section=%s; output section reordered:"
@ MSG_ORD_HDR_1 " number of SHN_BEGIN=%u, ordered=%u, default=%u, \
SHN_AFTER=%u"
@ MSG_ORD_TITLE_1 " %s=SHN_BEGIN: section=%s from %s"
@ MSG_ORD_TITLE_2 " %s=SHN_AFTER: section=%s from %s"
@ MSG_ORD_TITLE_3 " sort key=%u: section=%s from %s, %s=%s"
@ MSG_ORD_ERR_TITLE "the SHF_ORDERED section %s from %s has \
an error; flag ignored"
@ MSG_ORD_ERR_INFORANGE " the sh_info field is out of range"
@ MSG_ORD_ERR_ORDER " the section pointed by sh_info is an ordered section"
@ MSG_ORD_ERR_LINKRANGE " the sh_link field is out of range"
@ MSG_ORD_ERR_FLAGS " the sh_flag is incorrect"
@ MSG_ORD_ERR_CYCLIC " the sh_link is cyclic"
@ MSG_ORD_ERR_LINKINV " a section pointed to by sh_link has an error"
# Link-Auditing Messages
@ MSG_AUD_LIB "auditor %s: required by: %s %s"
@ MSG_AUD_INTERFACE "auditor %s: provides interface: %s"
@ MSG_AUD_VERSION "auditor %s: la_version(): %d: returned %d"
@ MSG_AUD_ACTIVITY "auditor %s: la_activity(): %s %s"
@ MSG_AUD_PREINIT "auditor %s: la_preinit(): %s"
@ MSG_AUD_OBJFILTER "auditor %s: la_objfilter(): %s: filtee=%s [ %s ]"
@ MSG_AUD_OBJFILTER_R "auditor %s: la_objfilter(): %s: returned 0 (filtee \
ignored)"
@ MSG_AUD_OBJOPEN "auditor %s: la_objopen(): %s"
@ MSG_AUD_OBJOPEN_R "auditor %s: la_objopen(): %s: returned %s"
@ MSG_AUD_OBJOPEN_RI "auditor %s: la_objopen(): %s: returned %s (flags \
ignored)"
@ MSG_AUD_OBJSEARCH "auditor %s: la_objsearch(): %s %s"
@ MSG_AUD_OBJSEARCH_R "auditor %s: la_objsearch(): %s: alternative path \
returned: %s"
@ MSG_AUD_OBJSEARCH_S "auditor %s: la_objsearch(): %s: alternative path \
returned: 0 (path skipped)"
@ MSG_AUD_OBJCLOSE "auditor %s: la_objclose(): %s"
@ MSG_AUD_SYMBIND "auditor %s: la_symbind(): %s: value: 0x%llx %s"
@ MSG_AUD_SYMBIND_R "auditor %s: la_symbind(): %s: returned value: \
0x%llx %s"
@ MSG_AUD_PLTENTER "auditor %s: la_pltenter(): %s: value: 0x%llx"
@ MSG_AUD_PLTENTER_R "auditor %s: la_pltenter(): %s: returned value: 0x%llx"
@ MSG_AUD_PLTEXIT "auditor %s: la_pltexit(): %s"
@ MSG_AUD_IGNORE "file=%s; global auditing request ignored: object \
did not initiate process"
@ MSG_AUD_SKIP "file=%s; skipped: using auditor from %s"
@ MSG_AUD_TERM "file=%s; auditor has indicated path should be skipped"
# GOT Messages
@ MSG_GOT_INFO "Global Offset Table information: (%u entries)"
# TRANSLATION_NOTE
# Do not translate .init or .fini, they represent reserved section names.
@ MSG_UTL_INIT "calling .init (%s): %s"
@ MSG_UTL_FINI "calling .fini: %s"
@ MSG_UTL_ARRAY "calling %s[%d]:0x%llx: %s"
@ MSG_UTL_TRANS "transferring control: %s"
@ MSG_UTL_INTOOLATE "loading after relocation has started: interposition \
request (DF_1_INTERPOSE) ignored: %s"
@ MSG_UTL_EDGE_TITLE_I "traversing %s dependency edge for interposer:"
@ MSG_UTL_EDGE_TITLE_S "traversing %s dependency edge:"
@ MSG_UTL_EDGE_START " node (%d): file=%s"
@ MSG_UTL_EDGE_IN " node (%d): file=%s: referenced by %s %s"
@ MSG_UTL_EDGE_OUT " node (%d): file=%s; cyclic dependency on %s"
@ MSG_UTL_COLLECT " [%d] %s; collecting %s section"
@ MSG_UTL_SORT "from sorted order"
@ MSG_UTL_PEND "pending"
@ MSG_UTL_DYN "dynamically triggered"
@ MSG_UTL_DONE "done"
@ MSG_UTL_DBNOTIFY "notify debugger: event: %s state: %s"
@ MSG_UTL_SCC_TITLE " cycle detected - sorting cyclic dependencies in %s"
@ MSG_UTL_SCC_SUBI "reverse load-order"
@ MSG_UTL_SCC_SUBF "load-order"
@ MSG_UTL_LCINTERFACE "file=%s; provides interface [%s]: 0x%llx"
# Generic strings
@ MSG_STR_IGNORE "ignored"
@ MSG_STR_ENTERED "entered"
@ MSG_STR_ORIGINAL "original"
@ MSG_STR_EXCLUDE "exclude"
@ MSG_STR_RESET "reset"
@ MSG_STR_IN " in"
@ MSG_STR_OUT "out"
@ MSG_STR_ACT "act"
@ MSG_STR_CURRENT "current"
@ MSG_STR_ADD "add"
@ MSG_STR_OLD "old"
@ MSG_STR_NEW "new"
@ MSG_STR_NEW_IMPLICIT "new (implicit)"
@ MSG_STR_RESOLVED "resolved"
@ MSG_STR_ADDING "adding"
@ MSG_STR_UP_1 "updating"
@ MSG_STR_UP_2 "updated"
@ MSG_STR_ALLOW "allow"
@ MSG_STR_REQUIRE "require"
@ MSG_STR_MOD_BEFORE "modify (before)"
@ MSG_STR_MOD_AFTER "modify (after)"
@ MSG_STR_UNKNOWN "<unknown>"
@ MSG_STR_ORPHAN "<orphan>"
@ MSG_STR_UNUSED "(unused)"
@ MSG_STR_AGAIN "(again)"
@ MSG_STR_NULL "(null)"
@ MSG_STR_ALTER " (alternate)"
@ MSG_STR_COPYZERO " (copy zero's unnecessary)"
@ MSG_STR_TEMPORARY " (temporary)"
@ MSG_STR_RETRY " (retry) "
# TLS related messages
@ MSG_TLS_STATBLOCK1 "static TLS module: [%ld] %s"
@ MSG_TLS_STATBLOCK2 "static TLS reservation: in use %#llx: \
additional backup: %#llx"
@ MSG_TLS_STATBLOCK3 "static TLS requirement: [%ld] %s: size %#llx: \
satisfied from backup reservation: remaining %#llx"
@ MSG_TLS_MODENT1 " block: %#18llx soff: %#10llx flags: %#llx \
%s"
@ MSG_TLS_MODENT2 " filesz: %#18llx memsz: %#10llx modid: %lld"
@ MSG_TLS_MODACT "%s TLS module: %s"
@ MSG_TLS_ADD "add"
@ MSG_TLS_REMOVE "remove"
# Statistics related messages
@ MSG_STATS_AR "archive %s: count=%d, used=%d (%d%%)"
@ MSG_STATS_GENERAL "General Statistics:"
@ MSG_STATS_FILES " Input files: relocatables=%lld \
shared objects=%lld archives=%lld"
@ MSG_STATS_SYMBOLS_OUT " Symbols output: globals=%-10lld locals=%lld"
@ MSG_STATS_SYMBOLS_IN " Symbols input: globals=%-10lld scoped=%-10lld \
eliminated=%lld"
@ MSG_STATS_REL_OUT " Relocations output: records=%lld"
@ MSG_STATS_REL_IN " Relocations input: records=%-10lld applied=%lld"
@ MSG_STATS_REL_TICACHE " Relocation Cache"
@ MSG_STATS_REL_TIACT "Active"
@ MSG_STATS_REL_TIOUT "Output"
@ MSG_STATS_REL_CACHE " %s: buffers=%d, used=%lld/%lld (%d%%), \
size=%lld%s"
@ MSG_STATS_REL_ACACHE " Aux: buffers=%d, used=%lld/%lld (%d%%), \
size=%lld%s"
# Capabilities messages
@ MSG_CAP_SYS_HW_1 "hardware capabilities (CA_SUNW_HW_1) - %s"
@ MSG_CAP_SYS_SF_1 "software capabilities (CA_SUNW_SF_1) - %s"
@ MSG_CAP_SYS_MACH "machine capability (CA_SUNW_MACH) - %s"
@ MSG_CAP_SYS_PLAT "platform capability (CA_SUNW_PLAT) - %s"
@ MSG_CAP_SYS_HW_2 "hardware capabilities (CA_SUNW_HW_2) - %s"
@ MSG_CAP_ALT_HW_1 "alternative hardware capabilities (CA_SUNW_HW_1) - %s"
@ MSG_CAP_ALT_SF_1 "alternative software capabilities (CA_SUNW_SF_1) - %s"
@ MSG_CAP_ALT_MACH "alternative machine capability (CA_SUNW_MACH) - %s"
@ MSG_CAP_ALT_PLAT "alternative platform capability (CA_SUNW_PLAT) - %s"
@ MSG_CAP_ALT_HW_2 "alternative hardware capabilities (CA_SUNW_HW_2) - %s"
@ MSG_CAP_SEC_TITLE "capabilities; input file=%s"
@ MSG_CAP_SEC_ENTRY "%12.12s %-15.15s %s"
@ MSG_CAP_CANDIDATE "obj=%s; capabilities candidate"
@ MSG_CAP_POST_TITLE "capabilities post processing"
@ MSG_CAP_FILTER_1 "dir=%s; capability directory filtered by %s"
@ MSG_CAP_FILTER_2 "dir=%s; no capability objects found"
@ MSG_CAP_IDENTICAL "obj=%s and obj=%s: have identical capabilities: both \
objects ignored"
@ MSG_ELF_HEADER "ELF Header"
# Capabilities entries.
# TRANSLATION_NOTE - the following two entries provide for a series of one or
# more capabilities table entries that align with the initial title.
@ MSG_CAP_ELF_TITLE " index tag value"
@ MSG_CAP_ELF_ENTRY "%10.10s %-15.15s %s"
# Dynamic entries.
# TRANSLATION_NOTE - the following two entries provide for a series of one or
# more dynamic table entries that align with the initial title.
@ MSG_DYN_TITLE " index tag value"
@ MSG_DYN_ENTRY "%10.10s %-16.16s %-#16llx %s"
# Symbol table entries.
# TRANSLATION_NOTE - the following entries provide for a series of one or more
# standard 32-bit symbol table entries that align with the initial title.
@ MSG_SYM_EFS_TITLE_32 " index value size type bind \
oth ver shndx name"
@ MSG_SYM_LDS_TITLE_32 " value size type bind \
oth ver shndx"
@ MSG_SYM_EFS_ENTRY_32 "%10.10s %10.10s 0x%8.8x %4s %4s %2s %4s \
%-14.14s %s"
# TRANSLATION_NOTE - the following entries provide for a series of one or more
# long 32-bit symbol table entries that align with the initial title.
@ MSG_SYM_EFL_TITLE_32 " index value size type bind \
oth ver shndx / name"
@ MSG_SYM_LDL_TITLE_32 " value size type bind \
oth ver shndx"
@ MSG_SYM_EFL_ENTRY_32 "%10.10s %10.10s 0x%8.8x %4s %4s %2s %4s \
%-14s %s"
# TRANSLATION_NOTE - the following entries provide for a series of one or more
# standard 64-bit symbol table entries that align with the initial title.
@ MSG_SYM_EFS_TITLE_64 " index value size \
type bind oth ver shndx name"
@ MSG_SYM_LDS_TITLE_64 " value size \
type bind oth ver shndx"
@ MSG_SYM_EFS_ENTRY_64 "%10.10s %18.18s 0x%16.16llx %4s %4s %2s %4s \
%-14.14s %s"
# TRANSLATION_NOTE - the following entries provide for a series of one or more
# long 64-bit symbol table entries that align with the initial title.
@ MSG_SYM_EFL_TITLE_64 " index value size \
type bind oth ver shndx / name"
@ MSG_SYM_LDL_TITLE_64 " value size \
type bind oth ver shndx"
@ MSG_SYM_EFL_ENTRY_64 "%10.10s %18.18s 0x%16.16llx %4s %4s %2s %4s \
%-14s %s"
# Syminfo entries.
# TRANSLATION_NOTE - the following two entries provide for a series of one or
# more symbol information table entries that align with the initial title.
@ MSG_SYMINFO_TITLE " index flags \
bound to symbol"
@ MSG_SYMINFO_ENTRY "%10.10s %-8s %7s %-24s %s"
@ MSG_SYMINFO_CAP "<symbol capabilities>"
@ MSG_SYMINFO_SELF "<self>"
@ MSG_SYMINFO_PARENT "<parent>"
@ MSG_SYMINFO_EXTERN "<extern>"
# Global offset table entries.
# TRANSLATION_NOTE - the following two entries are used by elfdump(1), and
# provide for a series of one or more 32-bit got table entries that align with
# the initial title.
@ MSG_GOT_TITLE_32 " index addr value \
pending relocation"
@ MSG_GOT_ENTRY_RE_32 "%10.10s 0x%08llx 0x%08llx %-24s %s"
@ MSG_GOT_ENTRY_NR_32 "%10.10s 0x%08llx 0x%08llx"
# TRANSLATION_NOTE - the following two entries are used by elfdump(1), and
# provide for a series of one or more 64-bit got table entries that align with
# the initial title.
@ MSG_GOT_TITLE_64 " index addr \
value pending relocation"
@ MSG_GOT_ENTRY_RE_64 "%10.10s 0x%016llx 0x%016llx %-24s %s"
@ MSG_GOT_ENTRY_NR_64 "%10.10s 0x%016llx 0x%016llx"
# TRANSLATION_NOTE - the following three entries are used by ld(1), and provide
# for a series of one or more 32-bit got table entries that align with one of
# the initial titles.
@ MSG_GOT_COLUMNS1_32 " index ref offset addend symbol"
@ MSG_GOT_COLUMNS2_32 " index ref offset value symbol"
@ MSG_GOT_FORMAT1_32 "%10.10s %3s 0x%08llx 0x%08llx %s"
@ MSG_GOT_FORMAT2_32 "%10.10s %3s 0x%08llx 0x%08llx %s:%s"
# TRANSLATION_NOTE - the following three entries are used by ld(1), and provide
# for a series of one or more 64-bit got table entries that align with one of
# the initial titles.
@ MSG_GOT_COLUMNS1_64 " index ref offset \
addend symbol"
@ MSG_GOT_COLUMNS2_64 " index ref offset \
value symbol"
@ MSG_GOT_FORMAT1_64 "%10.10s %3s 0x%016llx 0x%016llx %s"
@ MSG_GOT_FORMAT2_64 "%10.10s %3s 0x%016llx 0x%016llx %s:%s"
# Version table entries.
@ MSG_VER_DEF " index version dependency"
@ MSG_VER_NEED " file version"
@ MSG_VER_NEED_GNUVER " index file version"
@ MSG_VER_LINE_1 "%10.10s %-26.26s %-20s %s"
@ MSG_VER_LLINE_1 "%10s %-26s %-20s %s"
@ MSG_VER_LINE_2 "%47s %s"
@ MSG_VER_LINE_3 "%38s %-20s %s"
@ MSG_VER_LINE_4 " %s"
@ MSG_VER_LINE_5 " %-26.26s %s"
@ MSG_VER_LLINE_5 " %-26s %s"
# Relocation entries.
# TRANSLATION_NOTE - the following strings are used by elfdump(1). These
# strings provide for a series of one or more 32-bit relocation table entries,
# using truncated section names, that align with one of the initial titles.
@ MSG_REL_EFSA_TITLE_32 " type offset addend \
section symbol"
@ MSG_REL_EFSN_TITLE_32 " type offset \
section symbol"
@ MSG_REL_EFSA_ENTRY_32 " %-24s %#10llx %#10llx %-14.14s %s"
@ MSG_REL_EFSN_ENTRY_32 " %-24s %#10llx %-14.14s %s"
# TRANSLATION_NOTE - the following strings are used by elfdump(1). These
# strings provide for a series of one or more 32-bit relocation table entries,
# using long section names, that align with one of the initial titles.
@ MSG_REL_EFLA_TITLE_32 " type offset addend \
section / symbol"
@ MSG_REL_EFLN_TITLE_32 " type offset \
section / symbol"
@ MSG_REL_EFLA_ENTRY_32 " %-24s %#10llx %#10llx %-14s %s"
@ MSG_REL_EFLN_ENTRY_32 " %-24s %#10llx %-14s %s"
# TRANSLATION_NOTE - the following strings are used by ld.so.1(1). These
# strings provide for a series of one or more 32-bit relocation table entries,
# that align with the initial titles.
@ MSG_REL_RTA_TITLE_32 " type offset \
addend symbol"
@ MSG_REL_RTN_TITLE_32 " type offset \
value symbol"
@ MSG_REL_RTV_TITLE_32 " value"
@ MSG_REL_RTA_ENTRY_32 " %5s %-24s %#10llx %#10llx %s %s"
@ MSG_REL_RTN_ENTRY_32 " %5s %-24s %#10llx %s %s"
@ MSG_REL_RT_APLVAL_32 " apply %#10llx %#10llx"
@ MSG_REL_RT_APLREG_32 " apply %10.10s %#10llx"
# TRANSLATION_NOTE - the following strings are used by ld(1). These strings
# provide for a series of one or more 32-bit relocation table entries, using
# truncated section names, that align with one of the initial titles.
@ MSG_REL_LDSA_TITLE_32 " type \
offset addend section symbol"
@ MSG_REL_LDSN_TITLE_32 " type \
offset section symbol"
@ MSG_REL_LDSA_ENTRY_32 " %5s %-24s %#10llx %#10llx %-14.14s %s %s"
@ MSG_REL_LDSN_ENTRY_32 " %5s %-24s %#10llx %-14.14s %s %s"
@ MSG_REL_LDSV_TITLE_32 " type \
offset value section symbol"
# TRANSLATION_NOTE - the following strings are used by ld(1). These strings
# provide for a series of one or more 32-bit relocation table entries, using
# long section names, that align with one of the initial titles.
@ MSG_REL_LDLA_TITLE_32 " type \
offset addend section / symbol"
@ MSG_REL_LDLN_TITLE_32 " type \
offset section / symbol"
@ MSG_REL_LDLA_ENTRY_32 " %5s %-24s %#10llx %#10llx %-14s %s %s"
@ MSG_REL_LDLN_ENTRY_32 " %5s %-24s %#10llx %-14s %s %s"
@ MSG_REL_LDLV_TITLE_32 " type \
offset value section / symbol"
# TRANSLATION_NOTE - the following strings are used by elfdump(1). These
# strings provide for a series of one or more 64-bit relocation table entries,
# using truncated section names, that align with one of the initial titles.
@ MSG_REL_EFSA_TITLE_64 " type \
offset addend section symbol"
@ MSG_REL_EFSN_TITLE_64 " type \
offset section symbol"
@ MSG_REL_EFSA_ENTRY_64 " %-24s %#18llx %#18llx %-14.14s %s"
@ MSG_REL_EFSN_ENTRY_64 " %-24s %#18llx %-14.14s %s"
# TRANSLATION_NOTE - the following strings are used by elfdump(1). These
# strings provide for a series of one or more 64-bit relocation table entries,
# using long section names, that align with one of the initial titles.
@ MSG_REL_EFLA_TITLE_64 " type \
offset addend section / symbol"
@ MSG_REL_EFLN_TITLE_64 " type \
offset section / symbol"
@ MSG_REL_EFLA_ENTRY_64 " %-24s %#18llx %#18llx %-14s %s"
@ MSG_REL_EFLN_ENTRY_64 " %-24s %#18llx %-14s %s"
# TRANSLATION_NOTE - the following strings are used by ld.so.1(1). These
# strings provide for a series of one or more 64-bit relocation table entries,
# that align with the initial titles.
@ MSG_REL_RTA_TITLE_64 " type \
offset addend symbol"
@ MSG_REL_RTN_TITLE_64 " type \
offset value symbol"
@ MSG_REL_RTV_TITLE_64 " value"
@ MSG_REL_RTA_ENTRY_64 " %5s %-24s %#18llx %#18llx %s %s"
@ MSG_REL_RTN_ENTRY_64 " %5s %-24s %#18llx %s %s"
@ MSG_REL_RT_APLVAL_64 " apply %#18llx %#18llx"
@ MSG_REL_RT_APLREG_64 " apply %18.18s %#18llx"
# TRANSLATION_NOTE - the following strings are used by ld(1). These strings
# provide for a series of one or more 64-bit relocation table entries, using
# truncated section names, that align with one of the initial titles.
@ MSG_REL_LDSA_TITLE_64 " type \
offset addend section symbol"
@ MSG_REL_LDSN_TITLE_64 " type \
offset section symbol"
@ MSG_REL_LDSA_ENTRY_64 " %5s %-24s %#18llx %#18llx %-14.14s %s %s"
@ MSG_REL_LDSN_ENTRY_64 " %5s %-24s %#18llx %-14.14s %s %s"
@ MSG_REL_LDSV_TITLE_64 " type \
offset value section symbol"
# TRANSLATION_NOTE - the following strings are used by ld(1). These strings
# provide for a series of one or more 64-bit relocation table entries, using
# long section names, that align with one of the initial titles.
@ MSG_REL_LDLA_TITLE_64 " type \
offset addend section / symbol"
@ MSG_REL_LDLN_TITLE_64 " type \
offset section / symbol"
@ MSG_REL_LDLA_ENTRY_64 " %5s %-24s %#18llx %#18llx %-14s %s %s"
@ MSG_REL_LDLN_ENTRY_64 " %5s %-24s %#18llx %-14s %s %s"
@ MSG_REL_LDLV_TITLE_64 " type \
offset value section / symbol"
# dl*() family messages
@ MSG_DL_IPHDR_ENTER "dl_iterate_phdr() called from file=%s"
@ MSG_DL_IPHDR_MAPCNG "dl_iterate_phdr() object map/unmap in callback"
@ MSG_DL_IPHDR_UNMAP "dl_iterate_phdr() early return due to object unmap"
@ MSG_DL_IPHDR_CALLBACK "dl_iterate_phdr() callback"
@ MSG_DL_IPHDR_NAME " dlpi_name: %s"
@ MSG_DL_IPHDR_MAPCNT " dlpi_adds: %-18llu dlpi_subs: %-18llu"
@ MSG_DL_IPHDR_ADDR_32 " dlpi_addr: %#-10llx"
@ MSG_DL_IPHDR_PHDR_32 " dlpi_phdr: %#-10llx dlpi_phnum: %u"
@ MSG_DL_IPHDR_ADDR_64 " dlpi_addr: %#-18llx"
@ MSG_DL_IPHDR_PHDR_64 " dlpi_phdr: %#-18llx dlpi_phnum: %u"
@ MSG_DL_DLCLOSE "file=%s; dlclose() called from file=%s %s"
@ MSG_DL_DLDUMP "file=%s; dldump() called from file=%s: dumping to \
file=%s %s"
@ MSG_DL_DLOPEN "file=%s; dlopen() called from file=%s %s %s"
@ MSG_DL_DLADDR "dladdr() called from file=%s: %#llx"
@ MSG_DL_DLERROR "dlerror() called from file=%s: %s"
@ MSG_DL_DLINFO "dlinfo() called from file=%s: handle=%s, request=%s, \
user data=%#llx"
@ _END_
# Debug enabling tokens (for now these are untranslated)
@ MSG_TOK_ALL "all"
@ MSG_TOK_ARGS "args"
@ MSG_TOK_BINDINGS "bindings"
@ MSG_TOK_DL "dl"
@ MSG_TOK_CAP "cap"
@ MSG_TOK_BASIC "basic"
@ MSG_TOK_ENTRY "entry"
@ MSG_TOK_FILES "files"
@ MSG_TOK_HELP "help"
@ MSG_TOK_INIT "init"
@ MSG_TOK_LIBS "libs"
@ MSG_TOK_MAP "map"
@ MSG_TOK_RELOC "reloc"
@ MSG_TOK_SECTIONS "sections"
@ MSG_TOK_SEGMENTS "segments"
@ MSG_TOK_SUPPORT "support"
@ MSG_TOK_SYMBOLS "symbols"
@ MSG_TOK_TLS "tls"
@ MSG_TOK_VERSIONS "versions"
@ MSG_TOK_AUDIT "audit"
@ MSG_TOK_GOT "got"
@ MSG_TOK_MOVE "move"
@ MSG_TOK_DEMANGLE "demangle"
@ MSG_TOK_STRTAB "strtab"
@ MSG_TOK_STATS "statistics"
@ MSG_TOK_UNUSED "unused"
@ MSG_TOK_DETAIL "detail"
@ MSG_TOK_LONG "long"
@ MSG_TOK_NAME "name"
@ MSG_TOK_FULLNAME "fullname"
@ MSG_TOK_CLASS "class"
@ MSG_TOK_LMID "lmid"
@ MSG_TOK_TTIME "ttime"
@ MSG_TOK_DTIME "dtime"
@ MSG_TOK_OUTFILE "output"
@ MSG_TOK_LMID_ALL "ALL"
@ MSG_TOK_LMID_ALT "ALT"
@ MSG_TOK_LMID_BASE "BASE"
@ MSG_TOK_LMID_LDSO "LDSO"
# The following strings represent reserved words, files, pathnames and symbols.
# Reference to this strings is via the MSG_ORIG() macro, and thus no message
# translation is required.
@ MSG_STR_EMPTY ""
@ MSG_STR_DELIMIT ",:"
@ MSG_STR_COMDAT "COMDAT "
@ MSG_SCN_GOT ".got"
@ MSG_SCN_PLT ".plt"
@ MSG_SCN_BSS ".bss"
@ MSG_SCN_INIT ".init"
@ MSG_SCN_FINI ".fini"
@ MSG_SCN_INITARRAY ".initarray"
@ MSG_SCN_FINIARRAY ".finiarray"
@ MSG_SCN_PREINITARRAY ".preinitarray"
@ MSG_SH_INFO "sh_info"
@ MSG_SH_LINK "sh_link"
@ MSG_UTL_SCC_ENTRY " [%d] %s"
@ MSG_FMT_INDEX " [%d]"
@ MSG_FMT_INDEX_RANGE " [%d-%d]"
@ MSG_FMT_STR "%s"
@ MSG_FMT_PATH "%s/%s"
@ MSG_PTH_OBJECT "/tmp/ld.so-OBJECT-"
@ MSG_SUNW_OST_SGS "SUNW_OST_SGS"
# Entrance criteria messages
@ MSG_ECR_NAME " ec_name: %s"
@ MSG_ECR_FLAGS " ec_flags: %s"
@ MSG_ECR_IS_NAME " ec_is_name: %-8s ec_attrmask: %s"
@ MSG_ECR_SEGMENT " ec_segment: %-8s ec_attrbits: %s"
@ MSG_ECR_NDX " ec_ordndx: %-8d ec_type: %s"
@ MSG_ECR_FILES " ec_files:"
@ MSG_ECR_FILE " %-21s %s"
@ MSG_MAP_SORT_SEG " %s"
@ MSG_MAP_SORT_SEG_NAME " %-20s %s"
@ MSG_MAP_SORT_SEG_V " %-20s %-20s p_vaddr=0x%llx"
@ MSG_MAP_SORT_SEG_O " %-20s %-20s order=%d"
# Libs messages
@ MSG_LIB_FILE " %s"
# PLT binding methods
@ MSG_PLT_21D "21d"
@ MSG_PLT_24D "24d"
@ MSG_PLT_U32 "u32"
@ MSG_PLT_U44 "u44"
@ MSG_PLT_FULL "full"
@ MSG_PLT_FAR "far"
# Segment messages
@ MSG_SEG_DESC "segment[%d]"
@ MSG_SEG_NAME " sg_name: %s"
@ MSG_SEG_LENGTH " sg_length: %#llx"
@ MSG_SEG_ROUND " sg_round: %#llx"
@ MSG_SEG_ALIGN " sg_align: %#llx"
@ MSG_SEG_FLAGS " sg_flags: %s"
@ MSG_SEG_SIZESYM_TITLE " sg_sizesym:"
@ MSG_SEG_SIZESYM " %s"
@ MSG_SEG_IS_ORDER_TITLE " sg_is_order:"
@ MSG_SEG_OS_ORDER_TITLE " sg_os_order:"
@ MSG_SEG_LIST_ITEM " %s"
# Section messages (used when expanding segment information)
@ MSG_SEC_NAME " section[%d] os_name: %s"
# Symbol strings
@ MSG_SYM_GLOBAL "global"
@ MSG_SYM_LOCAL "local"
@ MSG_SYM_COPY "copy"
@ MSG_DLSYM_NEXT "[ RTLD_NEXT ]"
@ MSG_DLSYM_DEFAULT "[ RTLD_DEFAULT ]"
@ MSG_DLSYM_SELF "[ RTLD_SELF ]"
@ MSG_DLSYM_PROBE "[ RTLD_PROBE ]"
@ MSG_DLSYM_SINGLETON "( singleton reference )"
# Link-map mode strings
@ MSG_MODE_GLOBNODEL "[ GLOBAL NODELETE ]"
@ MSG_MODE_GLOB "[ GLOBAL ]"
@ MSG_MODE_NODEL "[ NODELETE ]"
# NOTE: these are used by lari(1), use care when changing.
@ MSG_BINFO_START " ("
@ MSG_BINFO_DIRECT "direct"
@ MSG_BINFO_INTERPOSE "interpose"
@ MSG_BINFO_COPYREF "copy-ref"
@ MSG_BINFO_FILTEE "filtee"
@ MSG_BINFO_PLTADDR "plt-addr"
@ MSG_BINFO_END ")"
@ MSG_BINFO_SEP ","
# Utility messages
@ MSG_UTL_EVNT_PREINIT "RD_PREINIT"
@ MSG_UTL_EVNT_POSTINIT "RD_POSTINIT"
@ MSG_UTL_EVNT_DLACT "RD_DLACTIVITY"
@ MSG_UTL_STA_ADD "RT_ADD"
@ MSG_UTL_STA_DELETE "RT_DELETE"
@ MSG_UTL_STA_CONSIST "RT_CONSISTENT"
# Version messages
@ MSG_VER_SELECTED " SELECTED %-26.26s %s"
@ MSG_VER_L_SELECTED " SELECTED %-26s %s"
@ MSG_VER_ALL " ALL %-26.26s"
@ MSG_VER_L_ALL " ALL %-26s"
# Global offset table entries.
@ MSG_GOT_INDEX " [%d]"
@ MSG_GOT_SMALL_PIC "pic"
@ MSG_GOT_BIG_PIC "PIC"
@ MSG_CNTL_ENTRY " [0x%llx] %s"
@ MSG_STR_NL "\n"
@ MSG_STR_LDVER "Solaris Linkers: %s"
@ MSG_FMT_INDEX " [%d]"
@ MSG_FMT_ISEC_NAME "[%u]%s"
@ MSG_FMT_MEMUNIT " (%lld%c)"
@ MSG_SUNW_OST_SGS "SUNW_OST_SGS"
@ MSG_ELF_MAGIC " ei_magic: { 0x%x, %c, %c, %c }"
@ MSG_ELF_CLASS " ei_class: %-18s ei_data: %s"
@ MSG_ELF_OSABI " ei_osabi: %-18s ei_abiversion: %s"
@ MSG_ELF_MACHINE " e_machine: %-18s e_version: %s"
@ MSG_ELF_TYPE " e_type: %s"
@ MSG_ELF_FLAGS " e_flags: %18s"
@ MSG_ELF_FLAGS_FMT " e_flags: %s"
@ MSG_ELF_ESIZE " e_entry: %#18llx e_ehsize: %2d \
e_shstrndx: %d"
@ MSG_ELFX_ESIZE " e_entry: %#18llx e_ehsize: %2d \
e_shstrndx: SHN_XINDEX (see shdr[0].sh_link)"
@ MSG_ELF_SHOFF " e_shoff: %#18llx e_shentsize: %2d \
e_shnum: %d"
@ MSG_ELFX_SHOFF " e_shoff: %#18llx e_shentsize: %2d \
e_shnum: 0 (see shdr[0].sh_size)"
@ MSG_ELF_PHOFF " e_phoff: %#18llx e_phentsize: %2d \
e_phnum: %d"
@ MSG_ELFX_PHOFF " e_phoff: %#18llx e_phentsize: %2d \
e_phnum: PN_XNUM (see shdr[0].sh_info)"
# Shdr[0] messages
@ MSG_SHD0_TITLE "Section Header[0]: (ELF Ehdr extensions)"
@ MSG_SHD0_ADDR " sh_addr: %-6lld sh_flags: %s"
@ MSG_SHD0_SIZE " sh_size: %-6lld (e_shnum) sh_type: %s"
@ MSG_SHD0_OFFSET " sh_offset: %-6lld \
sh_entsize: %lld"
@ MSG_SHD0_LINK " sh_link: %-6d (e_shstrndx) sh_info: \
%d (e_phnum)"
@ MSG_SHD0_ALIGN " sh_addralign: %-6lld"
# Section header messages
@ MSG_SHD_ADDR_32 " sh_addr: %#-10llx sh_flags: %s"
@ MSG_SHD_SIZE_32 " sh_size: %#-10llx sh_type: %s"
@ MSG_SHD_OFFSET_32 " sh_offset: %#-10llx sh_entsize: %#llx"
@ MSG_SHD_OFFSET_ENT_32 " sh_offset: %#-10llx sh_entsize: %#llx \
(%lld %s)"
@ MSG_SHD_LINK_32 " sh_link: %-14s sh_info: %s"
@ MSG_SHD_ALIGN_32 " sh_addralign: %#-10llx"
@ MSG_SHD_ADDR_64 " sh_addr: %#-18llx sh_flags: %s"
@ MSG_SHD_SIZE_64 " sh_size: %#-18llx sh_type: %s"
@ MSG_SHD_OFFSET_64 " sh_offset: %#-18llx sh_entsize: %#llx"
@ MSG_SHD_OFFSET_ENT_64 " sh_offset: %#-18llx sh_entsize: %#llx \
(%lld %s)"
@ MSG_SHD_LINK_64 " sh_link: %-18s sh_info: %s"
@ MSG_SHD_ALIGN_64 " sh_addralign: %#-18llx"
# Program header messages
@ MSG_PHD_VADDR_32 " p_vaddr: %#-10llx p_flags: %s"
@ MSG_PHD_PADDR_32 " p_paddr: %#-10llx p_type: %s"
@ MSG_PHD_FILESZ_32 " p_filesz: %#-10llx p_memsz: %#llx"
@ MSG_PHD_OFFSET_32 " p_offset: %#-10llx p_align: %#llx"
@ MSG_PHD_VADDR_64 " p_vaddr: %#-18llx p_flags: %s"
@ MSG_PHD_PADDR_64 " p_paddr: %#-18llx p_type: %s"
@ MSG_PHD_FILESZ_64 " p_filesz: %#-18llx p_memsz: %#llx"
@ MSG_PHD_OFFSET_64 " p_offset: %#-18llx p_align: %#llx"
# Syminfo formats
@ MSG_SYMINFO_UNKFLAG "[0x%x]"
# Lc_interface interface tags.
@ MSG_CI_NULL "NULL"
@ MSG_CI_VERSION "VERSION"
@ MSG_CI_ATEXIT "ATEXIT"
@ MSG_CI_LCMESSAGES "LCMESSAGES"
@ MSG_CI_BIND_GUARD "BIND_GUARD"
@ MSG_CI_BIND_CLEAR "BIND_CLEAR"
@ MSG_CI_THR_SELF "THR_SELF"
@ MSG_CI_TLS_MODADD "TLS_MODADD"
@ MSG_CI_TLS_MODREM "TLS_MODREM"
@ MSG_CI_TLS_STATMOD "TLS_STATMOD"
@ MSG_CI_THRINIT "THRINIT"
@ MSG_CI_CRITICAL "CRITICAL"
# TLS information flags
@ MSG_TLS_FLAG_STATIC "STATIC-TLS"
# mmapobj() mr_flags.
@ MSG_MR_PADDING "[ PADDING ]"
@ MSG_MR_HDR_ELF "[ HDR_ELF ]"
@ MSG_MR_HDR_AOUT "[ HDR_AOUT ]"
# audit originator
@ MSG_AUD_PRELOAD "[ LD_AUDIT ]"
@ MSG_AUD_GLOBAL "[ GLOBAL AUDIT ]"