/* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The ASF licenses this file to You under the Apache License, Version 2.0
* (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "httpd.h"
#include "http_log.h"
#include "ap_listen.h"
#include "simple_types.h"
#include "simple_io.h"
#include "simple_event.h"
#include "http_connection.h"
#include "util_filter.h"
#include "http_main.h"
#include "scoreboard.h"
#include "http_vhost.h"
APLOG_USE_MODULE(mpm_simple);
static void simple_io_timeout_cb(simple_core_t * sc, void *baton)
{
/* Code disabled because it does nothing yet but causes a compiler warning */
#if 0
simple_conn_t *scon = (simple_conn_t *) baton;
/* pqXXXXX: handle timeouts. */
conn_rec *c = scon->c;
cs = NULL;
#endif
ap_log_error(APLOG_MARK, APLOG_WARNING, 0, ap_server_conf, APLOGNO(00247)
"io timeout hit (?)");
}
static apr_status_t simple_io_process(simple_conn_t * scon)
{
apr_status_t rv;
simple_core_t *sc;
conn_rec *c;
if (scon->c->clogging_input_filters && !scon->c->aborted) {
/* Since we have an input filter which 'clogs' the input stream,
* like mod_ssl used to, lets just do the normal read from input
* filters, like the Worker MPM does. Filters that need to write
* where they would otherwise read, or read where they would
* otherwise write, should set the sense appropriately.
*/
ap_run_process_connection(scon->c);
if (scon->cs.state != CONN_STATE_SUSPENDED) {
scon->cs.state = CONN_STATE_LINGER;
}
}
sc = scon->sc;
c = scon->c;
while (!c->aborted) {
if (scon->pfd.reqevents != 0) {
rv = apr_pollcb_remove(sc->pollcb, &scon->pfd);
if (rv) {
ap_log_error(APLOG_MARK, APLOG_ERR, rv, ap_server_conf, APLOGNO(00248)
"simple_io_process: apr_pollcb_remove failure");
/*AP_DEBUG_ASSERT(rv == APR_SUCCESS);*/
}
scon->pfd.reqevents = 0;
}
if (scon->cs.state == CONN_STATE_READ_REQUEST_LINE) {
if (!c->aborted) {
ap_run_process_connection(c);
/* state will be updated upon return
* fall thru to either wait for readability/timeout or
* do lingering close
*/
}
else {
scon->cs.state = CONN_STATE_LINGER;
}
}
if (scon->cs.state == CONN_STATE_WRITE_COMPLETION) {
ap_filter_t *output_filter = c->output_filters;
while (output_filter->next != NULL) {
output_filter = output_filter->next;
}
rv = output_filter->frec->filter_func.out_func(output_filter,
NULL);
if (rv != APR_SUCCESS) {
ap_log_error(APLOG_MARK, APLOG_WARNING, rv, ap_server_conf, APLOGNO(00249)
"network write failure in core output filter");
scon->cs.state = CONN_STATE_LINGER;
}
else if (c->data_in_output_filters) {
/* Still in WRITE_COMPLETION_STATE:
* Set a write timeout for this connection, and let the
* event thread poll for writeability.
*/
simple_register_timer(scon->sc,
simple_io_timeout_cb,
scon,
scon->c->base_server !=
NULL ? scon->c->base_server->
timeout : ap_server_conf->timeout,
scon->pool);
scon->pfd.reqevents = (
scon->cs.sense == CONN_SENSE_WANT_READ ? APR_POLLIN :
APR_POLLOUT) | APR_POLLHUP | APR_POLLERR;
scon->cs.sense = CONN_SENSE_DEFAULT;
rv = apr_pollcb_add(sc->pollcb, &scon->pfd);
if (rv != APR_SUCCESS) {
ap_log_error(APLOG_MARK, APLOG_WARNING, rv,
ap_server_conf, APLOGNO(00250)
"apr_pollcb_add: failed in write completion");
AP_DEBUG_ASSERT(rv == APR_SUCCESS);
}
return APR_SUCCESS;
}
else if (c->keepalive != AP_CONN_KEEPALIVE || c->aborted) {
scon->cs.state = CONN_STATE_LINGER;
}
else if (c->data_in_input_filters) {
scon->cs.state = CONN_STATE_READ_REQUEST_LINE;
}
else {
scon->cs.state = CONN_STATE_CHECK_REQUEST_LINE_READABLE;
}
}
if (scon->cs.state == CONN_STATE_LINGER) {
ap_lingering_close(c);
apr_pool_destroy(scon->pool);
return APR_SUCCESS;
}
if (scon->cs.state == CONN_STATE_CHECK_REQUEST_LINE_READABLE) {
simple_register_timer(scon->sc,
simple_io_timeout_cb,
scon,
scon->c->base_server !=
NULL ? scon->c->base_server->
timeout : ap_server_conf->timeout,
scon->pool);
scon->pfd.reqevents = (
scon->cs.sense == CONN_SENSE_WANT_WRITE ? APR_POLLOUT :
APR_POLLIN);
scon->cs.sense = CONN_SENSE_DEFAULT;
rv = apr_pollcb_add(sc->pollcb, &scon->pfd);
if (rv) {
ap_log_error(APLOG_MARK, APLOG_ERR, rv, ap_server_conf, APLOGNO(00251)
"process_socket: apr_pollcb_add failure in read request line");
AP_DEBUG_ASSERT(rv == APR_SUCCESS);
}
return APR_SUCCESS;
}
}
ap_lingering_close(c);
apr_pool_destroy(scon->pool);
return APR_SUCCESS;
}
static void *simple_io_invoke(apr_thread_t * thread, void *baton)
{
simple_sb_t *sb = (simple_sb_t *) baton;
simple_conn_t *scon = (simple_conn_t *) sb->baton;
apr_status_t rv;
scon->c->current_thread = thread;
rv = simple_io_process(scon);
if (rv) {
ap_log_error(APLOG_MARK, APLOG_DEBUG, rv, ap_server_conf, APLOGNO(00252)
"simple_io_invoke: simple_io_process failed (?)");
}
return NULL;
}
static void *simple_io_setup_conn(apr_thread_t * thread, void *baton)
{
apr_status_t rv;
ap_sb_handle_t *sbh;
long conn_id = 0;
simple_sb_t *sb;
simple_conn_t *scon = (simple_conn_t *) baton;
/* pqXXXXX: remove this. */
ap_create_sb_handle(&sbh, scon->pool, 0, 0);
scon->ba = apr_bucket_alloc_create(scon->pool);
scon->c = ap_run_create_connection(scon->pool, ap_server_conf, scon->sock,
conn_id, sbh, scon->ba);
/* XXX: handle failure */
scon->c->cs = &scon->cs;
sb = apr_pcalloc(scon->pool, sizeof(simple_sb_t));
scon->c->current_thread = thread;
scon->pfd.p = scon->pool;
scon->pfd.desc_type = APR_POLL_SOCKET;
scon->pfd.desc.s = scon->sock;
scon->pfd.reqevents = APR_POLLIN;
sb->type = SIMPLE_PT_CORE_IO;
sb->baton = scon;
scon->pfd.client_data = sb;
ap_update_vhost_given_ip(scon->c);
rv = ap_run_pre_connection(scon->c, scon->sock);
if (rv != OK && rv != DONE) {
ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, ap_server_conf, APLOGNO(00253)
"simple_io_setup_conn: connection aborted");
scon->c->aborted = 1;
}
scon->cs.state = CONN_STATE_READ_REQUEST_LINE;
scon->cs.sense = CONN_SENSE_DEFAULT;
rv = simple_io_process(scon);
if (rv) {
ap_log_error(APLOG_MARK, APLOG_DEBUG, rv, ap_server_conf, APLOGNO(00254)
"simple_io_setup_conn: simple_io_process failed (?)");
}
return NULL;
}
apr_status_t simple_io_accept(simple_core_t * sc, simple_sb_t * sb)
{
apr_status_t rv;
apr_pool_t *ptrans;
apr_socket_t *socket;
ap_listen_rec *lr = (ap_listen_rec *) sb->baton;
/* pqXXXXXX: Consider doing pool recycling like the event/worker MPMs do. */
apr_pool_create(&ptrans, NULL);
apr_pool_tag(ptrans, "transaction");
rv = apr_socket_accept(&socket, lr->sd, ptrans);
if (rv) {
/* pqXXXXXX: unixd.c has _tons_ of custom handling on return values
* from accept, but it seems really crazy, it either worked, or didn't,
* but taking this approach of swallowing the error it is possible we have a
* fatal error on our listening socket, but we don't notice.
*
* Need to discuss this on dev@
*/
ap_log_error(APLOG_MARK, APLOG_CRIT, rv, NULL, APLOGNO(00255)
"simple_io_accept: apr_socket_accept failed");
return APR_SUCCESS;
}
else {
simple_conn_t *scon = apr_pcalloc(ptrans, sizeof(simple_conn_t));
scon->pool = ptrans;
scon->sock = socket;
scon->sc = sc;
return apr_thread_pool_push(sc->workers,
simple_io_setup_conn,
scon,
APR_THREAD_TASK_PRIORITY_NORMAL, NULL);
}
return APR_SUCCESS;
}
apr_status_t simple_io_event_process(simple_core_t * sc, simple_sb_t * sb)
{
/* pqXXXXX: In theory, if we have non-blocking operations on the connection
* we can do them here, before pushing to another thread, thats just
* not implemented right now.
*/
return apr_thread_pool_push(sc->workers,
simple_io_invoke,
sb, APR_THREAD_TASK_PRIORITY_NORMAL, NULL);
}