MoreFilesX.h revision ed0d4ccac4cbe85936511b94a907111e824fc588
/*
File: MoreFilesX.h
Contains: A collection of useful high-level File Manager routines
which use the HFS Plus APIs wherever possible.
Version: MoreFilesX 1.0.1
Copyright: � 1992-2002 by Apple Computer, Inc., all rights reserved.
Disclaimer: IMPORTANT: This Apple software is supplied to you by Apple Computer, Inc.
("Apple") in consideration of your agreement to the following terms, and your
use, installation, modification or redistribution of this Apple software
constitutes acceptance of these terms. If you do not agree with these terms,
please do not use, install, modify or redistribute this Apple software.
In consideration of your agreement to abide by the following terms, and subject
to these terms, Apple grants you a personal, non-exclusive license, under Apple�s
copyrights in this original Apple software (the "Apple Software"), to use,
reproduce, modify and redistribute the Apple Software, with or without
the Apple Software in its entirety and without modifications, you must retain
this notice and the following text and disclaimers in all such redistributions of
the Apple Software. Neither the name, trademarks, service marks or logos of
Apple Computer, Inc. may be used to endorse or promote products derived from the
Apple Software without specific prior written permission from Apple. Except as
expressly stated in this notice, no other rights or licenses, express or implied,
are granted by Apple herein, including but not limited to any patent rights that
may be infringed by your derivative works or by other works in which the Apple
Software may be incorporated.
The Apple Software is provided by Apple on an "AS IS" basis. APPLE MAKES NO
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED
WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, REGARDING THE APPLE SOFTWARE OR ITS USE AND OPERATION ALONE OR IN
COMBINATION WITH YOUR PRODUCTS.
IN NO EVENT SHALL APPLE BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
OF THE APPLE SOFTWARE, HOWEVER CAUSED AND WHETHER UNDER THEORY OF CONTRACT, TORT
(INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHERWISE, EVEN IF APPLE HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
File Ownership:
DRI: Apple Macintosh Developer Technical Support
Other Contact: For bug reports, consult the following page on
the World Wide Web:
Technology: DTS Sample Code
Writers:
(JL) Jim Luther
Change History (most recent first):
<3> 4/19/02 JL [2853905] Fixed #if test around header includes.
<2> 4/19/02 JL [2853901] Updated standard disclaimer.
<1> 1/25/02 JL MoreFilesX 1.0
Notes:
What do those arrows in the documentation for each routine mean?
--> The parameter is an input
<-- The parameter is an output. The pointer to the variable
where the output will be returned (must not be NULL).
<** The parameter is an optional output. If it is not a
NULL pointer, it points to the variable where the output
will be returned. If it is a NULL pointer, the output will
not be returned and will possibly let the routine and the
File Manager do less work. If you don't need an optional output,
don't ask for it.
**> The parameter is an optional input. If it is not a
NULL pointer, it points to the variable containing the
input data. If it is a NULL pointer, the input is not used
and will possibly let the routine and the File Manager
do less work.
*/
// Modified 2006-01-23 - added this comment.
#ifndef __MOREFILESX__
#define __MOREFILESX__
#ifndef __CARBON__
#if defined(__MACH__)
#else
#include <Carbon.h>
#endif
#endif
#if PRAGMA_ONCE
#pragma once
#endif
#ifdef __cplusplus
extern "C" {
#endif
#if PRAGMA_IMPORT
#endif
#pragma pack(2)
#endif
/*****************************************************************************/
/*
* FSGetFinderInfo and FSSetFinderInfo use these unions for Finder information.
*/
union FinderInfo
{
};
typedef union FinderInfo FinderInfo;
union ExtendedFinderInfo
{
};
typedef union ExtendedFinderInfo ExtendedFinderInfo;
/*****************************************************************************/
/*
* Macros to get information out of GetVolParmsInfoBuffer.
*/
/* version 1 field getters */
#define GetVolParmsInfoVersion(volParms) \
#define GetVolParmsInfoAttrib(volParms) \
#define GetVolParmsInfoLocalHand(volParms) \
((volParms)->vMLocalHand)
#define GetVolParmsInfoServerAdr(volParms) \
((volParms)->vMServerAdr)
/* version 2 field getters (assume zero result if version < 2) */
#define GetVolParmsInfoVolumeGrade(volParms) \
#define GetVolParmsInfoForeignPrivID(volParms) \
/* version 3 field getters (assume zero result if version < 3) */
#define GetVolParmsInfoExtendedAttributes(volParms) \
/* attribute bits supported by all versions of GetVolParmsInfoBuffer */
#define VolIsNetworkVolume(volParms) \
((volParms)->vMServerAdr != 0)
#define VolHasLimitFCBs(volParms) \
#define VolHasLocalWList(volParms) \
#define VolHasNoMiniFndr(volParms) \
#define VolHasNoVNEdit(volParms) \
#define VolHasNoLclSync(volParms) \
#define VolHasTrshOffLine(volParms) \
#define VolHasNoSwitchTo(volParms) \
#define VolHasNoDeskItems(volParms) \
#define VolHasNoBootBlks(volParms) \
#define VolHasAccessCntl(volParms) \
#define VolHasNoSysDir(volParms) \
#define VolHasExtFSVol(volParms) \
#define VolHasOpenDeny(volParms) \
#define VolHasCopyFile(volParms) \
#define VolHasMoveRename(volParms) \
#define VolHasDesktopMgr(volParms) \
#define VolHasShortName(volParms) \
#define VolHasFolderLock(volParms) \
#define VolHasPersonalAccessPrivileges(volParms) \
#define VolHasUserGroupList(volParms) \
#define VolHasCatSearch(volParms) \
#define VolHasFileIDs(volParms) \
#define VolHasBTreeMgr(volParms) \
#define VolHasBlankAccessPrivileges(volParms) \
#define VolSupportsAsyncRequests(volParms) \
#define VolSupportsTrashVolumeCache(volParms) \
/* attribute bits supported by version 3 and greater versions of GetVolParmsInfoBuffer */
#define VolIsEjectable(volParms) \
#define VolSupportsHFSPlusAPIs(volParms) \
#define VolSupportsFSCatalogSearch(volParms) \
#define VolSupportsFSExchangeObjects(volParms) \
#define VolSupports2TBFiles(volParms) \
#define VolSupportsLongNames(volParms) \
#define VolSupportsMultiScriptNames(volParms) \
#define VolSupportsNamedForks(volParms) \
#define VolSupportsSubtreeIterators(volParms) \
#define VolL2PCanMapFileBlocks(volParms) \
#define VolParentModDateChanges(volParms) \
#define VolAncestorModDateChanges(volParms) \
#define VolSupportsSymbolicLinks(volParms) \
#define VolIsAutoMounted(volParms) \
/*****************************************************************************/
/*
* Bit masks and macros to get common information out of userPrivileges byte
* returned by FSGetCatalogInfo.
*
* Note: The userPrivileges byte is the same as the ioACUser byte returned
* by PBGetCatInfo, and is the 1's complement of the user's privileges
* byte returned in ioACAccess by PBHGetDirAccess. That's where the
* ioACUser names came from.
*
* The userPrivileges are user's effective privileges based on the
* user ID and the groups that user belongs to, and the owner, group,
* and everyone privileges for the given directory.
*/
enum
{
/* mask for just the access restriction bits */
/* common access privilege settings */
kioACUserNoSeeFilesMask), /* make changes, but not see files or folders */
kioACUserBulletinBoard = kioACUserNoMakeChangesMask /* see files and folders, but not make changes */
};
/* Macros for testing ioACUser bits. */
#define UserIsOwner(userPrivileges) \
(((userPrivileges) & kioACUserNotOwnerMask) == 0)
#define UserHasFullAccess(userPrivileges) \
#define UserHasDropBoxAccess(userPrivileges) \
#define UserHasBulletinBoard(userPrivileges) \
#define UserHasNoAccess(userPrivileges) \
/*****************************************************************************/
/*****************************************************************************/
#pragma mark FSCopyFork
void *copyBufferPtr,
/*
The FSCopyFork function copies all data from the source fork to the
destination fork of open file forks and makes sure the destination EOF
is equal to the source EOF.
srcRefNum --> The source file reference number.
dstRefNum --> The destination file reference number.
copyBufferPtr --> Pointer to buffer to use during copy. The
buffer should be at least 4K-bytes minimum.
The larger the buffer, the faster the copy
(up to a point).
copyBufferSize --> The size of the copy buffer.
*/
/*****************************************************************************/
/*****************************************************************************/
#pragma mark FSGetVolParms
/*
The FSGetVolParms function returns information about the characteristics
of a volume. A result of paramErr usually just means the volume doesn't
support GetVolParms and the feature you were going to check
for isn't available.
volRefNum --> Volume specification.
bufferSize --> Size of buffer pointed to by volParmsInfo.
volParmsInfo <-- A GetVolParmsInfoBuffer record where the volume
attributes information is returned.
actualInfoSize <-- The number of bytes actually returned
in volParmsInfo.
__________
Also see: The GetVolParmsInfoBuffer Macros for checking attribute bits
in this file
*/
/*****************************************************************************/
#pragma mark FSGetVRefNum
/*
The FSGetVRefNum function determines the volume reference
number of a volume from a FSRef.
ref --> The FSRef.
vRefNum <-- The volume reference number.
*/
/*****************************************************************************/
#pragma mark FSGetVInfo
/*
The FSGetVInfo function returns the name, available space (in bytes),
and total space (in bytes) for the specified volume.
volume --> The volume reference number.
volumeName <** An optional pointer to a HFSUniStr255.
If not NULL, the volume name will be returned in
the HFSUniStr255.
freeBytes <** An optional pointer to a UInt64.
If not NULL, the number of free bytes on the
volume will be returned in the UInt64.
totalBytes <** An optional pointer to a UInt64.
If not NULL, the total number of bytes on the
volume will be returned in the UInt64.
*/
/*****************************************************************************/
#pragma mark FSGetVolFileSystemID
/*
The FSGetVolFileSystemID function returns the file system ID and signature
of a mounted volume. The file system ID identifies the file system
that handles requests to a particular volume. The signature identifies the
volume type of the volume (for example, FSID 0 is Macintosh HFS Plus, HFS
or MFS, where a signature of 0x4244 identifies the volume as HFS).
Here's a partial list of file system ID numbers (only Apple's file systems
are listed):
FSID File System
----- -----------------------------------------------------
$0000 Macintosh HFS Plus, HFS or MFS
$0100 ProDOS File System
$0101 PowerTalk Mail Enclosures
$4147 ISO 9660 File Access (through Foreign File Access)
$4242 High Sierra File Access (through Foreign File Access)
$464D QuickTake File System (through Foreign File Access)
$4953 Macintosh PC Exchange (MS-DOS)
$4A48 Audio CD Access (through Foreign File Access)
$4D4B Apple Photo Access (through Foreign File Access)
$6173 AppleShare (later versions of AppleShare only)
See the Technical Note "FL 35 - Determining Which File System
Is Active" and the "Guide to the File System Manager" for more
information.
volume --> The volume reference number.
fileSystemID <** An optional pointer to a UInt16.
If not NULL, the volume's file system ID will
be returned in the UInt16.
signature <** An optional pointer to a UInt16.
If not NULL, the volume's signature will
be returned in the UInt16.
*/
/*****************************************************************************/
#pragma mark FSGetMountedVolumes
/*
The FSGetMountedVolumes function returns the list of volumes currently
mounted in an array of FSRef records. The array of FSRef records is
returned in a Handle, volumeRefsHandle, which is allocated by
FSGetMountedVolumes. The caller is responsible for disposing of
volumeRefsHandle if the FSGetMountedVolumes returns noErr.
volumeRefsHandle <-- Pointer to an FSRef Handle where the array of
FSRefs is to be returned.
numVolumes <-- The number of volumes returned in the array.
*/
/*****************************************************************************/
/*****************************************************************************/
#pragma mark FSRefMakeFSSpec
/*
The FSRefMakeFSSpec function returns an FSSpec for the file or
directory specified by the ref parameter.
ref --> An FSRef specifying the file or directory.
spec <-- The FSSpec.
*/
/*****************************************************************************/
#pragma mark FSMakeFSRef
/*
The FSMakeFSRef function creates an FSRef from the traditional
volume reference number, directory ID and pathname inputs. It is
functionally equivalent to FSMakeFSSpec followed by FSpMakeFSRef.
volRefNum --> Volume specification.
dirID --> Directory specification.
name --> The file or directory name, or NULL.
ref <-- The FSRef.
*/
/*****************************************************************************/
#pragma mark FSMakePath
/*
The FSMakePath function creates a pathname from the traditional volume reference
number, directory ID, and pathname inputs. It is functionally equivalent to
FSMakeFSSpec, FSpMakeFSRef, FSRefMakePath.
volRefNum --> Volume specification.
dirID --> Directory specification.
name --> The file or directory name, or NULL.
path <-- A pointer to a buffer which FSMakePath will
fill with a C string representing the pathname
to the file or directory specified. The format of
the pathname returned can be determined with the
Gestalt selector gestaltFSAttr's
gestaltFSUsesPOSIXPathsForConversion bit.
If the gestaltFSUsesPOSIXPathsForConversion bit is
clear, the pathname is a Mac OS File Manager full
pathname in a C string, and file or directory names
in the pathname may be mangled as returned by
the File Manager. If the
gestaltFSUsesPOSIXPathsForConversion bit is set,
the pathname is a UTF8 encoded POSIX absolute
pathname in a C string. In either case, the
pathname returned can be passed back to
FSPathMakeRef to create an FSRef to the file or
directory, or FSPathMakeFSSpec to craete an FSSpec
to the file or directory.
maxPathSize --> The size of the path buffer in bytes. If the path
buffer is too small for the pathname string,
FSMakePath returns pathTooLongErr or
buffersTooSmall.
*/
/*****************************************************************************/
#pragma mark FSPathMakeFSSpec
/*
The FSPathMakeFSSpec function converts a pathname to an FSSpec.
path --> A pointer to a C String that is the pathname. The
format of the pathname you must supply can be
determined with the Gestalt selector gestaltFSAttr's
gestaltFSUsesPOSIXPathsForConversion bit.
If the gestaltFSUsesPOSIXPathsForConversion bit is
clear, the pathname must be a Mac OS File Manager
full pathname in a C string. If the
gestaltFSUsesPOSIXPathsForConversion bit is set,
the pathname must be a UTF8 encoded POSIX absolute
pathname in a C string.
spec <-- The FSSpec.
isDirectory <** An optional pointer to a Boolean.
If not NULL, true will be returned in the Boolean
if the specified path is a directory, or false will
be returned in the Boolean if the specified path is
a file.
*/
/*****************************************************************************/
#pragma mark UnicodeNameGetHFSName
/*
The UnicodeNameGetHFSName function converts a Unicode string
to a Pascal Str31 (or Str27) string using an algorithm similar to that used
by the File Manager. Note that if the name is too long or cannot be converted
using the given text encoding hint, you will get an error instead of the
mangled name that the File Manager would return.
nameLength --> Number of UniChar in name parameter.
name --> The Unicode string to convert.
textEncodingHint --> The text encoding hint used for the conversion.
You can pass kTextEncodingUnknown to use the
"default" textEncodingHint.
isVolumeName --> If true, the output name will be limited to
27 characters (kHFSMaxVolumeNameChars). If false,
the output name will be limited to 31 characters
(kHFSMaxFileNameChars).
hfsName <-- The hfsName as a Pascal string.
__________
Also see: HFSNameGetUnicodeName
*/
/*****************************************************************************/
#pragma mark HFSNameGetUnicodeName
/*
The HFSNameGetUnicodeName function converts a Pascal Str31 string to an
Unicode HFSUniStr255 string using the same routines as the File Manager.
hfsName --> The Pascal string to convert.
textEncodingHint --> The text encoding hint used for the conversion.
You can pass kTextEncodingUnknown to use the
"default" textEncodingHint.
unicodeName <-- The Unicode string.
__________
Also see: UnicodeNameGetHFSName
*/
/*****************************************************************************/
/*****************************************************************************/
#pragma mark FSRefValid
/*
The FSRefValid function determines if an FSRef is valid. If the result is
true, then the FSRef refers to an existing file or directory.
ref --> FSRef to a file or directory.
*/
/*****************************************************************************/
#pragma mark FSGetParentRef
/*
The FSGetParentRef function gets the parent directory FSRef of the
specified object.
Note: FSRefs always point to real file system objects. So, there cannot
be a FSRef to the parent of volume root directories. If you call
FSGetParentRef with a ref to the root directory of a volume, the
function result will be noErr and the parentRef will be invalid (using it
for other file system requests will fail).
ref --> FSRef to a file or directory.
parentRef <-- The parent directory's FSRef.
*/
/*****************************************************************************/
#pragma mark FSGetFileDirName
/*
The FSGetFileDirName function gets the name of the file or directory
specified.
ref --> FSRef to a file or directory.
outName <-- The file or directory name.
*/
/*****************************************************************************/
#pragma mark FSGetNodeID
long *nodeID, /* can be NULL */
/*
The GetNodeIDFromFSRef function gets the node ID number of the
file or directory specified (note: the node ID is the directory ID
for directories).
ref --> FSRef to a file or directory.
nodeID <** An optional pointer to a long.
If not NULL, the node ID will be returned in
the long.
isDirectory <** An optional pointer to a Boolean.
If not NULL, true will be returned in the Boolean
if the object is a directory, or false will be
returned in the Boolean if object is a file.
*/
/*****************************************************************************/
#pragma mark FSGetUserPrivilegesPermissions
/*
permissions of the file or directory specified.
ref --> FSRef to a file or directory.
userPrivileges <** An optional pointer to a UInt8.
If not NULL, the userPrivileges will be returned
in the UInt8.
permissions <** An optional pointer to an UInt32[4] array.
If not NULL, the permissions will be returned
in the UInt32[4] array.
*/
/*****************************************************************************/
#pragma mark FSCheckLock
/*
The FSCheckLock function determines if a file or directory is locked.
If FSCheckLock returns noErr, then the file or directory is not locked
and the volume it is on is not locked either. If FSCheckLock returns
fLckdErr, then the file or directory is locked. If FSCheckLock returns
wPrErr, then the volume is locked by hardware (i.e., locked tab on
removable media). If FSCheckLock returns vLckdErr, then the volume is
locked by software.
ref --> FSRef to a file or directory.
*/
/*****************************************************************************/
#pragma mark FSGetForkSizes
/*
the specified file.
ref --> FSRef to a file or directory.
dataLogicalSize <** An optional pointer to a UInt64.
If not NULL, the data fork's size will be
returned in the UInt64.
rsrcLogicalSize <** An optional pointer to a UInt64.
If not NULL, the resource fork's size will be
returned in the UInt64.
__________
Also see: FSGetTotalForkSizes
*/
/*****************************************************************************/
#pragma mark FSGetTotalForkSizes
/*
physical size of the specified file (i.e., it adds the sizes of all file
forks). It optionally returns the number of file forks.
ref --> FSRef to a file or directory.
totalLogicalSize <** An optional pointer to a UInt64.
If not NULL, the sum of all fork logical sizes
will be returned in the UInt64.
totalPhysicalSize <** An optional pointer to a UInt64.
If not NULL, the sum of all fork physical sizes
will be returned in the UInt64.
forkCount <** An optional pointer to a ItemCount.
If not NULL, the number of file forks
will be returned in the ItemCount.
__________
Also see: FSGetForkSizes
*/
/*****************************************************************************/
#pragma mark FSBumpDate
/*
The FSBumpDate function changes the content modification date of a file
content modification date.
ref --> FSRef to a file or directory.
*/
/*****************************************************************************/
#pragma mark FSGetFinderInfo
/*
The FSGetFinderInfo function gets the finder information for a file or
directory.
ref --> FSRef to a file or directory.
info <** An optional pointer to a FinderInfo.
If not NULL, the FileInfo (if ref is a file) or
the FolderInfo (if ref is a folder) will be
returned in the FinderInfo.
extendedInfo <** An optional pointer to a ExtendedFinderInfo.
If not NULL, the ExtendedFileInfo (if ref is a file)
or the ExtendedFolderInfo (if ref is a folder) will
be returned in the ExtendedFinderInfo.
isDirectory <** An optional pointer to a Boolean.
If not NULL, true will be returned in the Boolean
if the object is a directory, or false will be
returned in the Boolean if object is a file.
__________
Also see: FSSetFinderInfo
*/
/*****************************************************************************/
#pragma mark FSSetFinderInfo
/*
The FSSetFinderInfo function sets the finder information for a file or
directory.
ref --> FSRef to a file or directory.
info **> A pointer to a FinderInfo record with the new
FileInfo (if ref is a file) or new FolderInfo
(if ref is a folder), or NULL if the FinderInfo
is not to be changed.
extendedInfo **> A pointer to a FinderInfo record with the new
ExtendedFileInfo (if ref is a file) or new
ExtendedFolderInfo (if ref is a folder), or NULL
if the ExtendedFinderInfo is not to be changed.
__________
Also see: FSGetFinderInfo
*/
/*****************************************************************************/
#pragma mark FSChangeCreatorType
/*
ref --> FSRef to a file.
creator --> The new creator type or 0x00000000 to leave
the creator type alone.
fileType --> The new file type or 0x00000000 to leave the
file type alone.
*/
/*****************************************************************************/
#pragma mark FSChangeFinderFlags
/*
The FSChangeFinderFlags function sets or clears flag bits in
the finderFlags field of a file's FileInfo record or a
directory's FolderInfo record.
ref --> FSRef to a file or directory.
setBits --> If true, then set the bits specified in flagBits.
If false, then clear the bits specified in flagBits.
flagBits --> The flagBits parameter specifies which Finder Flag
bits to set or clear. If a bit in flagBits is set,
then the same bit in fdFlags is either set or
cleared depending on the state of the setBits
parameter.
*/
/*****************************************************************************/
#pragma mark FSSetInvisible
#pragma mark FSClearInvisible
/*
The FSSetInvisible and FSClearInvisible functions set or clear the
kIsInvisible bit in the finderFlags field of the specified file or
directory's finder information.
ref --> FSRef to a file or directory.
*/
/*****************************************************************************/
#pragma mark FSSetNameLocked
#pragma mark FSClearNameLocked
/*
The FSSetNameLocked and FSClearNameLocked functions set or clear the
kNameLocked bit bit in the finderFlags field of the specified file or
directory's finder information.
ref --> FSRef to a file or directory.
*/
/*****************************************************************************/
#pragma mark FSSetIsStationery
#pragma mark FSClearIsStationery
/*
The FSSetIsStationery and FSClearIsStationery functions set or clear the
kIsStationery bit bit in the finderFlags field of the specified file or
directory's finder information.
ref --> FSRef to a file or directory.
*/
/*****************************************************************************/
#pragma mark FSSetHasCustomIcon
#pragma mark FSClearHasCustomIcon
/*
The FSSetHasCustomIcon and FSClearHasCustomIcon functions set or clear the
kHasCustomIcon bit bit in the finderFlags field of the specified file or
directory's finder information.
ref --> FSRef to a file or directory.
*/
/*****************************************************************************/
#pragma mark FSClearHasBeenInited
/*
The FSClearHasBeenInited function clears the kHasBeenInited bit in the
finderFlags field of the specified file or directory's finder information.
Note: There is no FSSetHasBeenInited function because ONLY the Finder
should set the kHasBeenInited bit.
ref --> FSRef to a file or directory.
*/
/*****************************************************************************/
#pragma mark FSCopyFileMgrAttributes
const FSRef *destinationRef,
/*
The CopyFileMgrAttributes function copies all File Manager attributes
from the source file or directory to the destination file or directory.
If copyLockBit is true, then set the locked state of the destination
to match the source.
sourceRef --> FSRef to a file or directory.
destinationRef --> FSRef to a file or directory.
copyLockBit --> If true, set the locked state of the destination
to match the source.
*/
/*****************************************************************************/
#pragma mark FSMoveRenameObjectUnicode
const FSRef *destDirectory,
/*
The FSMoveRenameObjectUnicode function moves a file or directory and
optionally renames it. The source and destination locations must be on
the same volume.
Note: If the input ref parameter is invalid, this call will fail and
newRef, like ref, will be invalid.
ref --> FSRef to a file or directory.
destDirectory --> FSRef to the destination directory.
nameLength --> Number of UniChar in name parameter.
name --> An Unicode string with the new name for the
moved object, or NULL if no rename is wanted.
textEncodingHint --> The text encoding hint used for the rename.
You can pass kTextEncodingUnknown to use the
"default" textEncodingHint.
newRef <-- The new FSRef of the object moved. Note that if
this function fails at any step along the way,
newRef is still then final location of the object.
*/
/*****************************************************************************/
#pragma mark FSDeleteContainerContents
/*
The FSDeleteContainerContents function deletes the contents of a container
directory. All files and subdirectories in the specified container are
deleted. If a locked file or directory is encountered, it is unlocked and
then deleted. If any unexpected errors are encountered,
FSDeleteContainerContents quits and returns to the caller.
container --> FSRef to a directory.
__________
Also see: FSDeleteContainer
*/
/*****************************************************************************/
#pragma mark FSDeleteContainer
/*
The FSDeleteContainer function deletes a container directory and its contents.
All files and subdirectories in the specified container are deleted.
If a locked file or directory is encountered, it is unlocked and then
deleted. After deleting the container's contents, the container is
deleted. If any unexpected errors are encountered, FSDeleteContainer
quits and returns to the caller.
container --> FSRef to a directory.
__________
Also see: FSDeleteContainerContents
*/
/*****************************************************************************/
#pragma mark IterateContainerFilterProcPtr
const FSCatalogInfo *catalogInfo,
const HFSUniStr255 *name,
void *yourDataPtr);
/*
This is the prototype for the IterateContainerFilterProc function which
is called once for each file and directory found by FSIterateContainer.
The IterateContainerFilterProc can use the read-only data it receives for
whatever it wants.
The result of the IterateContainerFilterProc function indicates if
iteration should be stopped. To stop iteration, return true; to continue
iteration, return false.
The yourDataPtr parameter can point to whatever data structure you might
want to access from within the IterateContainerFilterProc.
containerChanged --> Set to true if the container's contents changed
during iteration.
currentLevel --> The current recursion level into the container.
1 = the container, 2 = the container's immediate
subdirectories, etc.
catalogInfo --> The catalog information for the current object.
Only the fields requested by the whichInfo
parameter passed to FSIterateContainer are valid.
ref --> The FSRef to the current object.
spec --> The FSSpec to the current object if the wantFSSpec
parameter passed to FSIterateContainer is true.
name --> The name of the current object if the wantName
parameter passed to FSIterateContainer is true.
yourDataPtr --> An optional pointer to whatever data structure you
might want to access from within the
IterateFilterProc.
result <-- To stop iteration, return true; to continue
iteration, return false.
__________
Also see: FSIterateContainer
*/
/*****************************************************************************/
#pragma mark CallIterateContainerFilterProc
#define CallIterateContainerFilterProc(userRoutine, containerChanged, currentLevel, catalogInfo, ref, spec, name, yourDataPtr) \
(*(userRoutine))((containerChanged), (currentLevel), (catalogInfo), (ref), (spec), (name), (yourDataPtr))
/*****************************************************************************/
#pragma mark FSIterateContainer
void *yourDataPtr);
/*
The FSIterateContainer function performs a recursive iteration (scan) of the
specified container directory and calls your IterateContainerFilterProc
function once for each file and directory found.
The maxLevels parameter lets you control how deep the recursion goes.
If maxLevels is 1, FSIterateContainer only scans the specified directory;
if maxLevels is 2, FSIterateContainer scans the specified directory and
one subdirectory below the specified directory; etc. Set maxLevels to
zero to scan all levels.
The yourDataPtr parameter can point to whatever data structure you might
want to access from within your IterateContainerFilterProc.
container --> The FSRef to the container directory to iterate.
maxLevels --> Maximum number of directory levels to scan or
zero to scan all directory levels.
whichInfo --> The fields of the FSCatalogInfo you wish to get.
wantFSSpec --> Set to true if you want the FSSpec to each
object passed to your IterateContainerFilterProc.
wantName --> Set to true if you want the name of each
object passed to your IterateContainerFilterProc.
iterateFilter --> A pointer to the IterateContainerFilterProc you
want called once for each file and directory found
by FSIterateContainer.
yourDataPtr --> An optional pointer to whatever data structure you
might want to access from within the
IterateFilterProc.
*/
/*****************************************************************************/
#pragma mark FSGetDirectoryItems
/*
The FSGetDirectoryItems function returns the list of items in the specified
container. The array of FSRef records is returned in a Handle, refsHandle,
which is allocated by FSGetDirectoryItems. The caller is responsible for
disposing of refsHandle if the FSGetDirectoryItems returns noErr.
container --> FSRef to a directory.
refsHandle <-- Pointer to an FSRef Handle where the array of
FSRefs is to be returned.
numRefs <-- The number of FSRefs returned in the array.
containerChanged <-- Set to true if the container changes while the
list of items is being obtained.
*/
/*****************************************************************************/
#pragma mark FSExchangeObjectsCompat
FSRef *newDestRef);
/*
The FSExchangeObjectsCompat function exchanges the data between two files.
The FSExchangeObjectsCompat function is an enhanced version of
FSExchangeObjects function. The two enhancements FSExchangeObjectsCompat
provides are:
1, FSExchangeObjectsCompat will work on volumes which do not support
FSExchangeObjects. FSExchangeObjectsCompat does this by emulating
FSExchangeObjects through a series of File Manager operations. If
there is a failure at any step along the way, FSExchangeObjectsCompat
attempts to undo any steps already taken to leave the files in their
original state in their original locations.
2. FSExchangeObjectsCompat returns new FSRefs to the source and
destination files. Note that if this function fails at any step along
the way, newSourceRef and newDestRef still give you access to the final
locations of the files being exchanged -- even if they are renamed or
not in their original locations.
sourceRef --> FSRef to the source file.
destRef --> FSRef to the destination file.
newSourceRef <-- The new FSRef to the source file.
newDestRef <-- The new FSRef to the destination file.
*/
/*****************************************************************************/
/*****************************************************************************/
#pragma mark MFX_FSLockRange
/* Renamed from FSLockRange to MFX_FSLockRange to avoid a conflict with
* the FSLockRange function present in the system library since Mac OS X
* 10.4. */
/*
The LockRange function locks (denies access to) a portion of a file
refNum --> The file reference number of an open file.
rangeLength --> The number of bytes in the range.
rangeStart --> The starting byte in the range to lock.
__________
Also see: UnlockRange
*/
/*****************************************************************************/
#pragma mark MFX_FSUnlockRange
/* Renamed from FSUnlockRange to MFX_FSUnlockRange to avoid a conflict with
* the FSUnlockRange function present in the system library since Mac OS X
* 10.4. */
/*
The UnlockRange function unlocks (allows access to) a previously locked
refNum --> The file reference number of an open file.
rangeLength --> The number of bytes in the range.
rangeStart --> The starting byte in the range to unlock.
__________
Also see: LockRange
*/
/*****************************************************************************/
#pragma mark FSGetDirAccess
/*
The FSGetDirAccess function retrieves the directory access control
information for a directory on a shared volume.
ref --> An FSRef specifying the directory.
ownerID <** An optional pointer to a SInt32.
If not NULL, the directory's owner ID
will be returned in the SInt32.
groupID <** An optional pointer to a SInt32.
If not NULL, the directory's group ID, or 0
if no group affiliation, will be returned in
the SInt32.
accessRights <** An optional pointer to a SInt32.
If not NULL, the directory's access rights
will be returned in the SInt32.
__________
Also see: FSSetDirAccess, FSMapID, FSMapName
*/
/*****************************************************************************/
#pragma mark FSSetDirAccess
/*
The FSpSetDirAccess function changes the directory access control
information for a directory on a shared volume. You must be the owner of
a directory to change its access control information.
ref --> An FSRef specifying the directory.
ownerID --> The directory's owner ID.
groupID --> The directory's group ID or 0 if no group affiliation.
accessRights --> The directory's access rights.
__________
Also see: FSGetDirAccess, FSMapID, FSMapName
*/
/*****************************************************************************/
#pragma mark FSGetVolMountInfoSize
/*
The FSGetVolMountInfoSize function determines the how much space the
program needs to allocate for a volume mounting information record.
volRefNum --> Volume specification.
size <-- The space needed (in bytes) of the volume
mounting information record.
__________
Also see: FSGetVolMountInfo, VolumeMount
*/
/*****************************************************************************/
#pragma mark FSGetVolMountInfo
void *volMountInfo);
/*
The FSGetVolMountInfo function retrieves a volume mounting information
record containing all the information needed to mount the volume,
except for passwords.
volRefNum --> Volume specification.
volMountInfo <-- The volume mounting information.
__________
Also see: FSGetVolMountInfoSize, VolumeMount
*/
/*****************************************************************************/
#pragma mark FSVolumeMount
// This function exists in Mac OS X 10.5, we cannot re-define it here.
// We don't use this function, so just don't compile it.
#if 0
const void *volMountInfo,
#endif
/*
The VolumeMount function mounts a volume using a volume mounting
information record.
volMountInfo --> A volume mounting information record.
volRefNum <-- The volume reference number.
__________
Also see: FSGetVolMountInfoSize, FSGetVolMountInfo
*/
/*****************************************************************************/
/*
The FSMapID function determines the name of a user or group if you know
the user or group ID.
volRefNum --> Volume specification.
objType --> The mapping function code:
kOwnerID2Name to map a user ID to a user name
kGroupID2Name to map a group ID to a group name
name <** An optional pointer to a buffer (minimum Str31).
If not NULL, the user or group name
will be returned in the buffer.
__________
Also see: FSGetDirAccess, FSSetDirAccess, FSMapName
*/
/*****************************************************************************/
/*
The FSMapName function determines the user or group ID if you know the
user or group name.
volRefNum --> Volume specification.
name --> The user or group name.
objType --> The mapping function code:
kOwnerName2ID to map a user name to a user ID
kGroupName2ID to map a user name to a group ID
ugID <-- The user or group ID.
__________
Also see: FSGetDirAccess, FSSetDirAccess, FSMapID
*/
/*****************************************************************************/
#pragma mark FSCopyFile
const FSRef *srcFileRef,
const FSRef *dstDirectoryRef,
/*
The FSCopyFile function duplicates a file and optionally renames it.
The source and destination volumes must be on the same file server.
This function instructs the server to copy the file.
srcFileRef --> An FSRef specifying the source file.
dstDirectoryRef --> An FSRef specifying the destination directory.
nameLength --> Number of UniChar in copyName parameter (ignored
if copyName is NULL).
copyName --> Points to the new file name if the file is to be
renamed, or NULL if the file isn't to be renamed.
textEncodingHint --> The text encoding hint used for the rename.
You can pass kTextEncodingUnknown to use the
"default" textEncodingHint.
newRef <** An optional pointer to a FSRef.
If not NULL, the FSRef of the duplicated file
will be returned in the FSRef.
*/
/*****************************************************************************/
#pragma mark FSMoveRename
const FSRef *srcFileRef,
const FSRef *dstDirectoryRef,
/*
The FSMoveRename function moves a file or directory (object), and
optionally renames it. The source and destination locations must be on
the same shared volume.
srcFileRef --> An FSRef specifying the source file.
dstDirectoryRef --> An FSRef specifying the destination directory.
nameLength --> Number of UniChar in moveName parameter (ignored
if copyName is NULL)
moveName --> Points to the new object name if the object is to be
renamed, or NULL if the object isn't to be renamed.
textEncodingHint --> The text encoding hint used for the rename.
You can pass kTextEncodingUnknown to use the
"default" textEncodingHint.
newRef <** An optional pointer to a FSRef.
If not NULL, the FSRef of the moved object
will be returned in the FSRef.
*/
/*****************************************************************************/
/*****************************************************************************/
#pragma mark FSResolveFileIDRef
/*
The FSResolveFileIDRef function returns an FSRef for the file with the
specified file ID reference.
volRefNum --> Volume specification.
fileID --> The file ID reference.
ref <-- The FSRef for the file ID reference.
__________
Also see: FSCreateFileIDRef, FSDeleteFileIDRef
*/
/*****************************************************************************/
#pragma mark FSCreateFileIDRef
/*
The FSCreateFileIDRef function creates a file ID reference for the
specified file, or if a file ID reference already exists, supplies
the file ID reference and returns the result code fidExists or afpIDExists.
ref --> The FSRef for the file.
fileID <-- The file ID reference (if result is noErr,
fidExists, or afpIDExists).
__________
Also see: GetFSRefFromFileIDRef, FSDeleteFileIDRef
*/
/*****************************************************************************/
#pragma mark FSDeleteFileIDRef
/*
Why is there no FSDeleteFileIDRef routine? There are two reasons:
1. Since Mac OS 8.1, PBDeleteFileIDRef hasn't deleted file ID references.
On HFS volumes, deleting a file ID reference breaks aliases (which
use file ID references to track files as they are moved around on a
volume) and file ID references are automatically deleted when the file
they refer to is deleted. On HFS Plus volumes, file ID references are
always created when a file is created, deleted when the file is deleted,
and cannot be deleted at any other time.
2. PBDeleteFileIDRef causes a memory access fault under Mac OS X 10.0
through 10.1.x. While this will be fixed in a future release, the
implementation, like the Mac OS 8/9 implementation, does not delete
file ID references.
__________
Also see: GetFSRefFromFileIDRef, FSCreateFileIDRef
*/
/*****************************************************************************/
/*****************************************************************************/
#pragma mark GetTempBuffer
/*
The GetTempBuffer function allocates a temporary buffer for file system
operations which is at least 4K bytes and a multiple of 4K bytes.
buffReqSize --> Size you'd like the buffer to be.
buffActSize <-- The size of the buffer allocated.
function result <-- Pointer to memory allocated, or NULL if no memory
was available. The caller is responsible for
disposing of this buffer with DisposePtr.
*/
/*****************************************************************************/
#pragma mark FileRefNumGetFSRef
short refNum,
/*
The FileRefNumGetFSRef function gets the FSRef of an open file.
refNum --> The file reference number of an open file.
ref <-- The FSRef to the open file.
*/
/*****************************************************************************/
#pragma mark FSSetDefault
const FSRef *newDefault,
FSRef *oldDefault);
/*
The FSSetDefault function sets the current working directory to the
directory specified by newDefault. The previous current working directory
is returned in oldDefault and must be used to restore the current working
directory to its previous state with the FSRestoreDefault function.
These two functions are designed to be used as a wrapper around
Standard I/O routines where the location of the file is implied to be the
current working directory. This is how you should use these functions:
result = FSSetDefault(&newDefault, &oldDefault);
if ( noErr == result )
{
// call the Stdio functions like remove, rename,
// fopen, freopen, etc here!
result = FSRestoreDefault(&oldDefault);
}
newDefault --> An FSRef that specifies the new current working
directory.
oldDefault <-- The previous current working directory's FSRef.
__________
Also see: FSRestoreDefault
*/
/*****************************************************************************/
#pragma mark FSRestoreDefault
const FSRef *oldDefault);
/*
The FSRestoreDefault function restores the current working directory
to the directory specified by oldDefault. The oldDefault parameter was
previously obtained from the FSSetDefault function.
These two functions are designed to be used as a wrapper around
Standard I/O routines where the location of the file is implied to be the
current working directory. This is how you should use these functions:
result = FSSetDefault(&newDefault, &oldDefault);
if ( noErr == result )
{
// call the Stdio functions like remove, rename,
// fopen, freopen, etc here!
result = FSRestoreDefault(&oldDefault);
}
oldDefault --> The FSRef of the location to restore.
__________
Also see: FSSetDefault
*/
/*****************************************************************************/
#pragma pack()
#endif
#ifdef PRAGMA_IMPORT_OFF
#endif
#ifdef __cplusplus
}
#endif
#endif /* __MOREFILESX__ */