AMD64andLegacy.mac revision ff308c5c63cf562048295f83638429a925415a10
; $Id$
;; @file
; VMM - World Switchers, template for AMD64 to PAE and 32-bit.
;
;
; Copyright (C) 2006-2014 Oracle Corporation
;
; This file is part of VirtualBox Open Source Edition (OSE), as
; available from http://www.virtualbox.org. This file is free software;
; you can redistribute it and/or modify it under the terms of the GNU
; General Public License (GPL) as published by the Free Software
; Foundation, in version 2 as it comes in the "COPYING" file of the
; VirtualBox OSE distribution. VirtualBox OSE is distributed in the
; hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
;
;%define DEBUG_STUFF 1
;%define STRICT_IF 1
;*******************************************************************************
;* Header Files *
;*******************************************************************************
%include "VBox/asmdefs.mac"
%include "VBox/apic.mac"
%include "iprt/x86.mac"
%include "VBox/vmm/cpum.mac"
%include "VBox/vmm/stam.mac"
%include "VBox/vmm/vm.mac"
%include "VBox/err.mac"
%include "CPUMInternal.mac"
%include "VMMSwitcher.mac"
;
; Start the fixup records
; We collect the fixups in the .data section as we go along
; It is therefore VITAL that no-one is using the .data section
; for anything else between 'Start' and 'End'.
;
BEGINDATA
GLOBALNAME Fixups
BEGINCODE
GLOBALNAME Start
%ifndef VBOX_WITH_HYBRID_32BIT_KERNEL
BITS 64
;;
; The C interface.
;
; @param pVM gcc: rdi msc:rcx The VM handle.
;
BEGINPROC vmmR0ToRawMode
%ifdef DEBUG_STUFF
COM64_S_NEWLINE
COM64_S_CHAR '^'
%endif
;
; The ordinary version of the code.
;
%ifdef STRICT_IF
pushf
pop rax
test eax, X86_EFL_IF
jz .if_clear_in
mov eax, 0c0ffee00h
ret
.if_clear_in:
%endif
;
; make r9 = pVM and rdx = pCpum.
; rax, rcx and r8 are scratch here after.
%ifdef RT_OS_WINDOWS
mov r9, rcx
%else
mov r9, rdi
%endif
lea rdx, [r9 + VM.cpum]
%ifdef VBOX_WITH_STATISTICS
;
; Switcher stats.
;
lea r8, [r9 + VM.StatSwitcherToGC]
STAM64_PROFILE_ADV_START r8
%endif
;
; Call worker (far return).
;
mov eax, cs
push rax
call NAME(vmmR0ToRawModeAsm)
%ifdef VBOX_WITH_VMMR0_DISABLE_LAPIC_NMI
; Unblock Local APIC NMI vectors
; Do this here to ensure the host CS is already restored
mov r8d, [rdx + CPUM.offCPUMCPU0]
mov ecx, [rdx + r8 + CPUMCPU.fApicDisVectors]
test ecx, ecx
jz gth64_apic_done
cmp byte [rdx + r8 + CPUMCPU.fX2Apic], 1
je gth64_x2apic
; Legacy xAPIC mode:
mov r8, [rdx + r8 + CPUMCPU.pvApicBase]
shr ecx, 1
jnc gth64_nolint0
and dword [r8 + APIC_REG_LVT_LINT0], ~APIC_REG_LVT_MASKED
gth64_nolint0:
shr ecx, 1
jnc gth64_nolint1
and dword [r8 + APIC_REG_LVT_LINT1], ~APIC_REG_LVT_MASKED
gth64_nolint1:
shr ecx, 1
jnc gth64_nopc
and dword [r8 + APIC_REG_LVT_PC], ~APIC_REG_LVT_MASKED
gth64_nopc:
shr ecx, 1
jnc gth64_notherm
and dword [r8 + APIC_REG_LVT_THMR], ~APIC_REG_LVT_MASKED
gth64_notherm:
shr ecx, 1
jnc gth64_nocmci
and dword [r8 + APIC_REG_LVT_CMCI], ~APIC_REG_LVT_MASKED
gth64_nocmci:
shr ecx, 1
jnc gth64_noeilvt0
and dword [r8 + APIC_REG_EILVT0], ~APIC_REG_LVT_MASKED
gth64_noeilvt0:
shr ecx, 1
jnc gth64_noeilvt1
and dword [r8 + APIC_REG_EILVT1], ~APIC_REG_LVT_MASKED
gth64_noeilvt1:
shr ecx, 1
jnc gth64_noeilvt2
and dword [r8 + APIC_REG_EILVT2], ~APIC_REG_LVT_MASKED
gth64_noeilvt2:
shr ecx, 1
jnc gth64_noeilvt3
and dword [r8 + APIC_REG_EILVT3], ~APIC_REG_LVT_MASKED
gth64_noeilvt3:
jmp gth64_apic_done
; x2APIC mode:
gth64_x2apic:
mov r8, rax ; save rax
mov r10, rcx
shr r10d, 1
jnc gth64_x2_nolint0
mov ecx, MSR_IA32_X2APIC_START + (APIC_REG_LVT_LINT0 >> 4)
rdmsr
and eax, ~APIC_REG_LVT_MASKED
wrmsr
gth64_x2_nolint0:
shr r10d, 1
jnc gth64_x2_nolint1
mov ecx, MSR_IA32_X2APIC_START + (APIC_REG_LVT_LINT1 >> 4)
rdmsr
and eax, ~APIC_REG_LVT_MASKED
wrmsr
gth64_x2_nolint1:
shr r10d, 1
jnc gth64_x2_nopc
mov ecx, MSR_IA32_X2APIC_START + (APIC_REG_LVT_PC >> 4)
rdmsr
and eax, ~APIC_REG_LVT_MASKED
wrmsr
gth64_x2_nopc:
shr r10d, 1
jnc gth64_x2_notherm
mov ecx, MSR_IA32_X2APIC_START + (APIC_REG_LVT_THMR >> 4)
rdmsr
and eax, ~APIC_REG_LVT_MASKED
wrmsr
gth64_x2_notherm:
shr r10d, 1
jnc gth64_x2_nocmci
mov ecx, MSR_IA32_X2APIC_START + (APIC_REG_LVT_CMCI >> 4)
rdmsr
and eax, ~APIC_REG_LVT_MASKED
wrmsr
gth64_x2_nocmci:
mov rax, r8 ; restore rax
gth64_apic_done:
%endif
%ifdef VBOX_WITH_STATISTICS
;
; Switcher stats.
;
lea r8, [r9 + VM.StatSwitcherToGC]
STAM64_PROFILE_ADV_STOP r8
%endif
ret
ENDPROC vmmR0ToRawMode
%else ; VBOX_WITH_HYBRID_32BIT_KERNEL
BITS 32
;;
; The C interface.
;
BEGINPROC vmmR0ToRawMode
%ifdef DEBUG_STUFF
COM32_S_NEWLINE
COM32_S_CHAR '^'
%endif
%ifdef VBOX_WITH_STATISTICS
;
; Switcher stats.
;
FIXUP FIX_HC_VM_OFF, 1, VM.StatSwitcherToGC
mov edx, 0ffffffffh
STAM_PROFILE_ADV_START edx
%endif
; Thunk to/from 64 bit when invoking the worker routine.
;
FIXUP FIX_HC_VM_OFF, 1, VM.cpum
mov edx, 0ffffffffh
push 0
push cs
push 0
FIXUP FIX_HC_32BIT, 1, .vmmR0ToRawModeReturn - NAME(Start)
push 0ffffffffh
FIXUP FIX_HC_64BIT_CS, 1
push 0ffffh
FIXUP FIX_HC_32BIT, 1, NAME(vmmR0ToRawModeAsm) - NAME(Start)
push 0ffffffffh
retf
.vmmR0ToRawModeReturn:
;
; This selector reloading is probably not necessary, but we do it anyway to be quite sure
; the CPU has the right idea about the selectors.
;
mov edx, ds
mov ds, edx
mov ecx, es
mov es, ecx
mov edx, ss
mov ss, edx
%ifdef VBOX_WITH_VMMR0_DISABLE_LAPIC_NMI
Missing implementation!
%endif
%ifdef VBOX_WITH_STATISTICS
;
; Switcher stats.
;
FIXUP FIX_HC_VM_OFF, 1, VM.StatSwitcherToHC
mov edx, 0ffffffffh
STAM_PROFILE_ADV_STOP edx
%endif
ret
ENDPROC vmmR0ToRawMode
BITS 64
%endif ;!VBOX_WITH_HYBRID_32BIT_KERNEL
; *****************************************************************************
; vmmR0ToRawModeAsm
;
; Phase one of the switch from host to guest context (host MMU context)
;
; INPUT:
; - edx virtual address of CPUM structure (valid in host context)
;
; - eax, ecx, edx, r8
;
; ASSUMPTION:
; - current CS and DS selectors are wide open
;
; *****************************************************************************
ALIGNCODE(16)
BEGINPROC vmmR0ToRawModeAsm
;; Store the offset from CPUM to CPUMCPU in r8
mov r8d, [rdx + CPUM.offCPUMCPU0]
;;
;; Save CPU host context
;; Skip eax, edx and ecx as these are not preserved over calls.
;;
; general registers.
; mov [rdx + r8 + CPUMCPU.Host.rax], rax - scratch
mov [rdx + r8 + CPUMCPU.Host.rbx], rbx
; mov [rdx + r8 + CPUMCPU.Host.rcx], rcx - scratch
; mov [rdx + r8 + CPUMCPU.Host.rdx], rdx - scratch
mov [rdx + r8 + CPUMCPU.Host.rdi], rdi
mov [rdx + r8 + CPUMCPU.Host.rsi], rsi
mov [rdx + r8 + CPUMCPU.Host.rsp], rsp
mov [rdx + r8 + CPUMCPU.Host.rbp], rbp
; mov [rdx + r8 + CPUMCPU.Host.r8 ], r8 - scratch
; mov [rdx + r8 + CPUMCPU.Host.r9 ], r9 - scratch
mov [rdx + r8 + CPUMCPU.Host.r10], r10
mov [rdx + r8 + CPUMCPU.Host.r11], r11
mov [rdx + r8 + CPUMCPU.Host.r12], r12
mov [rdx + r8 + CPUMCPU.Host.r13], r13
mov [rdx + r8 + CPUMCPU.Host.r14], r14
mov [rdx + r8 + CPUMCPU.Host.r15], r15
; selectors.
mov [rdx + r8 + CPUMCPU.Host.ds], ds
mov [rdx + r8 + CPUMCPU.Host.es], es
mov [rdx + r8 + CPUMCPU.Host.fs], fs
mov [rdx + r8 + CPUMCPU.Host.gs], gs
mov [rdx + r8 + CPUMCPU.Host.ss], ss
; MSRs
mov rbx, rdx
mov ecx, MSR_K8_FS_BASE
rdmsr
mov [rbx + r8 + CPUMCPU.Host.FSbase], eax
mov [rbx + r8 + CPUMCPU.Host.FSbase + 4], edx
mov ecx, MSR_K8_GS_BASE
rdmsr
mov [rbx + r8 + CPUMCPU.Host.GSbase], eax
mov [rbx + r8 + CPUMCPU.Host.GSbase + 4], edx
mov ecx, MSR_K6_EFER
rdmsr
mov [rbx + r8 + CPUMCPU.Host.efer], eax
mov [rbx + r8 + CPUMCPU.Host.efer + 4], edx
mov rdx, rbx
; special registers.
sldt [rdx + r8 + CPUMCPU.Host.ldtr]
sidt [rdx + r8 + CPUMCPU.Host.idtr]
sgdt [rdx + r8 + CPUMCPU.Host.gdtr]
str [rdx + r8 + CPUMCPU.Host.tr] ; yasm BUG, generates sldt. YASMCHECK!
; flags
pushf
pop qword [rdx + r8 + CPUMCPU.Host.rflags]
%ifdef VBOX_WITH_VMMR0_DISABLE_LAPIC_NMI
; Block Local APIC NMI vectors
cmp byte [rdx + r8 + CPUMCPU.fX2Apic], 1
je htg_x2apic
; Legacy xAPIC mode. No write completion required when writing to the
; LVT registers as we have mapped the APIC page non-cacheable and the
; MMIO is CPU-local.
mov rbx, [rdx + r8 + CPUMCPU.pvApicBase]
or rbx, rbx
jz htg_apic_done
xor edi, edi ; fApicDisVectors
mov eax, [rbx + APIC_REG_LVT_LINT0]
mov ecx, eax
and ecx, (APIC_REG_LVT_MASKED | APIC_REG_LVT_MODE_MASK)
cmp ecx, APIC_REG_LVT_MODE_NMI
jne htg_nolint0
or edi, 0x01
or eax, APIC_REG_LVT_MASKED
mov [rbx + APIC_REG_LVT_LINT0], eax
htg_nolint0:
mov eax, [rbx + APIC_REG_LVT_LINT1]
mov ecx, eax
and ecx, (APIC_REG_LVT_MASKED | APIC_REG_LVT_MODE_MASK)
cmp ecx, APIC_REG_LVT_MODE_NMI
jne htg_nolint1
or edi, 0x02
or eax, APIC_REG_LVT_MASKED
mov [rbx + APIC_REG_LVT_LINT1], eax
htg_nolint1:
mov eax, [rbx + APIC_REG_LVT_PC]
mov ecx, eax
and ecx, (APIC_REG_LVT_MASKED | APIC_REG_LVT_MODE_MASK)
cmp ecx, APIC_REG_LVT_MODE_NMI
jne htg_nopc
or edi, 0x04
or eax, APIC_REG_LVT_MASKED
mov [rbx + APIC_REG_LVT_PC], eax
htg_nopc:
mov eax, [rbx + APIC_REG_VERSION]
shr eax, 16
push rax
cmp al, 5
jb htg_notherm
je htg_nocmci
mov eax, [rbx + APIC_REG_LVT_CMCI]
mov ecx, eax
and ecx, (APIC_REG_LVT_MASKED | APIC_REG_LVT_MODE_MASK)
cmp ecx, APIC_REG_LVT_MODE_NMI
jne htg_nocmci
or edi, 0x10
or eax, APIC_REG_LVT_MASKED
mov [rbx + APIC_REG_LVT_CMCI], eax
htg_nocmci:
mov eax, [rbx + APIC_REG_LVT_THMR]
mov ecx, eax
and ecx, (APIC_REG_LVT_MASKED | APIC_REG_LVT_MODE_MASK)
cmp ecx, APIC_REG_LVT_MODE_NMI
jne htg_notherm
or edi, 0x08
or eax, APIC_REG_LVT_MASKED
mov [rbx + APIC_REG_LVT_THMR], eax
htg_notherm:
pop rax
test ah, ah
jns htg_noeilvt
; AMD Extended LVT registers
mov esi, [rbx + 0x400]
shr esi, 16
and esi, 0xff
jz htg_noeilvt
mov ebp, 0x20
htg_tsteilvtx:
mov eax, [rbx + APIC_REG_EILVT0]
mov ecx, eax
and ecx, (APIC_REG_LVT_MASKED | APIC_REG_LVT_MODE_MASK)
cmp ecx, APIC_REG_LVT_MODE_NMI
jne htg_noeilvtx
or edi, ebp
or eax, APIC_REG_LVT_MASKED
mov [rbx + APIC_REG_EILVT0], eax
htg_noeilvtx:
add rbx, 0x10 ; clobbers rbx!
shl ebp, 1
dec esi
jnz htg_tsteilvtx
htg_noeilvt:
mov [rdx + r8 + CPUMCPU.fApicDisVectors], edi
jmp htg_apic_done
; x2APIC mode:
htg_x2apic:
mov r15, rdx ; save rdx
xor edi, edi ; fApicDisVectors
mov ecx, MSR_IA32_X2APIC_START + (APIC_REG_LVT_LINT0 >> 4)
rdmsr
mov ebx, eax
and ebx, (APIC_REG_LVT_MASKED | APIC_REG_LVT_MODE_MASK)
cmp ebx, APIC_REG_LVT_MODE_NMI
jne htg_x2_nolint0
or edi, 0x01
or eax, APIC_REG_LVT_MASKED
wrmsr
htg_x2_nolint0:
mov ecx, MSR_IA32_X2APIC_START + (APIC_REG_LVT_LINT1 >> 4)
rdmsr
mov ebx, eax
and ebx, (APIC_REG_LVT_MASKED | APIC_REG_LVT_MODE_MASK)
cmp ebx, APIC_REG_LVT_MODE_NMI
jne htg_x2_nolint1
or edi, 0x02
or eax, APIC_REG_LVT_MASKED
wrmsr
htg_x2_nolint1:
mov ecx, MSR_IA32_X2APIC_START + (APIC_REG_LVT_PC >> 4)
rdmsr
mov ebx, eax
and ebx, (APIC_REG_LVT_MASKED | APIC_REG_LVT_MODE_MASK)
cmp ebx, APIC_REG_LVT_MODE_NMI
jne htg_x2_nopc
or edi, 0x04
or eax, APIC_REG_LVT_MASKED
wrmsr
htg_x2_nopc:
mov ecx, MSR_IA32_X2APIC_START + (APIC_REG_VERSION >> 4)
rdmsr
shr eax, 16
cmp al, 5
jb htg_x2_notherm
je htg_x2_nocmci
mov ecx, MSR_IA32_X2APIC_START + (APIC_REG_LVT_CMCI >> 4)
rdmsr
mov ebx, eax
and ebx, (APIC_REG_LVT_MASKED | APIC_REG_LVT_MODE_MASK)
cmp ebx, APIC_REG_LVT_MODE_NMI
jne htg_x2_nocmci
or edi, 0x10
or eax, APIC_REG_LVT_MASKED
wrmsr
htg_x2_nocmci:
mov ecx, MSR_IA32_X2APIC_START + (APIC_REG_LVT_THMR >> 4)
rdmsr
mov ebx, eax
and ebx, (APIC_REG_LVT_MASKED | APIC_REG_LVT_MODE_MASK)
cmp ebx, APIC_REG_LVT_MODE_NMI
jne htg_x2_notherm
or edi, 0x08
or eax, APIC_REG_LVT_MASKED
wrmsr
htg_x2_notherm:
mov rdx, r15
mov [rdx + r8 + CPUMCPU.fApicDisVectors], edi
htg_apic_done:
%endif ; VBOX_WITH_VMMR0_DISABLE_LAPIC_NMI
FIXUP FIX_NO_SYSENTER_JMP, 0, htg_no_sysenter - NAME(Start) ; this will insert a jmp htg_no_sysenter if host doesn't use sysenter.
; save MSR_IA32_SYSENTER_CS register.
mov rbx, rdx ; save edx
mov ecx, MSR_IA32_SYSENTER_CS
rdmsr ; edx:eax <- MSR[ecx]
mov [rbx + r8 + CPUMCPU.Host.SysEnter.cs], eax
mov [rbx + r8 + CPUMCPU.Host.SysEnter.cs + 4], edx
xor eax, eax ; load 0:0 to cause #GP upon sysenter
xor edx, edx
wrmsr
mov rdx, rbx ; restore edx
jmp short htg_no_sysenter
ALIGNCODE(16)
htg_no_sysenter:
;; handle use flags.
mov esi, [rdx + r8 + CPUMCPU.fUseFlags] ; esi == use flags.
and esi, ~CPUM_USED_FPU ; Clear CPUM_USED_* flags. ;;@todo FPU check can be optimized to use cr0 flags!
mov [rdx + r8 + CPUMCPU.fUseFlags], esi
; debug registers.
test esi, CPUM_USE_DEBUG_REGS_HYPER | CPUM_USE_DEBUG_REGS_HOST
jnz htg_debug_regs_save
htg_debug_regs_no:
DEBUG_CHAR('a') ; trashes esi
; control registers.
mov rax, cr0
mov [rdx + r8 + CPUMCPU.Host.cr0], rax
;mov rax, cr2 ; assume host os don't stuff things in cr2. (safe)
;mov [rdx + r8 + CPUMCPU.Host.cr2], rax
mov rax, cr3
mov [rdx + r8 + CPUMCPU.Host.cr3], rax
mov rax, cr4
mov [rdx + r8 + CPUMCPU.Host.cr4], rax
;;
;; Start switching to VMM context.
;;
;
; Change CR0 and CR4 so we can correctly emulate FPU/MMX/SSE[23] exceptions
; Also disable WP. (eax==cr4 now)
; Note! X86_CR4_PSE and X86_CR4_PAE are important if the host thinks so :-)
;
and rax, X86_CR4_MCE | X86_CR4_PSE | X86_CR4_PAE
mov ecx, [rdx + r8 + CPUMCPU.Guest.cr4]
DEBUG_CHAR('b') ; trashes esi
;; @todo Switcher cleanup: Determine base CR4 during CPUMR0Init / VMMR3SelectSwitcher putting it
; in CPUMCPU.Hyper.cr4 (which isn't currently being used). That should
; simplify this operation a bit (and improve locality of the data).
;
; CR4.AndMask and CR4.OrMask are set in CPUMR3Init based on the presence of
; FXSAVE and XSAVE support on the host CPU
;
and ecx, [rdx + CPUM.CR4.AndMask]
or eax, ecx
or eax, [rdx + CPUM.CR4.OrMask]
mov cr4, rax
DEBUG_CHAR('c') ; trashes esi
mov eax, [rdx + r8 + CPUMCPU.Guest.cr0]
and eax, X86_CR0_EM
or eax, X86_CR0_PE | X86_CR0_PG | X86_CR0_TS | X86_CR0_ET | X86_CR0_NE | X86_CR0_MP
mov cr0, rax
DEBUG_CHAR('0') ; trashes esi
; Load new gdt so we can do far jump to guest code after cr3 reload.
lgdt [rdx + r8 + CPUMCPU.Hyper.gdtr]
DEBUG_CHAR('1') ; trashes esi
; Store the hypervisor cr3 for later loading
mov ebp, [rdx + r8 + CPUMCPU.Hyper.cr3]
;;
;; Load Intermediate memory context.
;;
FIXUP FIX_INTER_AMD64_CR3, 1
mov eax, 0ffffffffh
mov cr3, rax
DEBUG_CHAR('2') ; trashes esi
;;
;; 1. Switch to compatibility mode, placing ourselves in identity mapped code.
;;
jmp far [NAME(fpIDEnterTarget) wrt rip]
; 16:32 Pointer to IDEnterTarget.
NAME(fpIDEnterTarget):
FIXUP FIX_ID_32BIT, 0, NAME(IDEnterTarget) - NAME(Start)
dd 0
FIXUP FIX_HYPER_CS, 0
dd 0
;;
; Detour for saving the host DR7 and DR6.
; esi and rdx must be preserved.
htg_debug_regs_save:
DEBUG_S_CHAR('s');
mov rax, dr7 ; not sure, but if I read the docs right this will trap if GD is set. FIXME!!!
mov [rdx + r8 + CPUMCPU.Host.dr7], rax
mov ecx, X86_DR7_INIT_VAL
cmp eax, ecx
je .htg_debug_regs_dr7_disabled
mov dr7, rcx
.htg_debug_regs_dr7_disabled:
mov rax, dr6 ; just in case we save the state register too.
mov [rdx + r8 + CPUMCPU.Host.dr6], rax
; save host DR0-3?
test esi, CPUM_USE_DEBUG_REGS_HYPER
jz htg_debug_regs_no
DEBUG_S_CHAR('S');
mov rax, dr0
mov [rdx + r8 + CPUMCPU.Host.dr0], rax
mov rbx, dr1
mov [rdx + r8 + CPUMCPU.Host.dr1], rbx
mov rcx, dr2
mov [rdx + r8 + CPUMCPU.Host.dr2], rcx
mov rax, dr3
mov [rdx + r8 + CPUMCPU.Host.dr3], rax
or dword [rdx + r8 + CPUMCPU.fUseFlags], CPUM_USED_DEBUG_REGS_HOST
jmp htg_debug_regs_no
; We're now on identity mapped pages in 32-bit compatibility mode.
BITS 32
ALIGNCODE(16)
GLOBALNAME IDEnterTarget
DEBUG_CHAR('3')
; 2. Deactivate long mode by turning off paging.
mov ebx, cr0
and ebx, ~X86_CR0_PG
mov cr0, ebx
DEBUG_CHAR('4')
; 3. Load intermediate page table.
FIXUP SWITCHER_FIX_INTER_CR3_GC, 1
mov edx, 0ffffffffh
mov cr3, edx
; 4. Disable long mode.
; We also use the chance to disable syscall/sysret and fast fxsave/fxrstor.
mov ecx, MSR_K6_EFER
rdmsr
DEBUG_CHAR('5')
and eax, ~(MSR_K6_EFER_LME | MSR_K6_EFER_SCE | MSR_K6_EFER_FFXSR)
wrmsr
DEBUG_CHAR('6')
%ifndef SWITCHER_TO_PAE
; 4b. Disable PAE.
mov eax, cr4
and eax, ~X86_CR4_PAE
mov cr4, eax
%else
%endif
; 5. Enable paging.
or ebx, X86_CR0_PG
mov cr0, ebx
jmp short just_a_jump
just_a_jump:
DEBUG_CHAR('7')
;;
;; 6. Jump to guest code mapping of the code and load the Hypervisor CS.
;;
FIXUP FIX_ID_2_GC_NEAR_REL, 1, NAME(JmpGCTarget) - NAME(Start)
jmp near NAME(JmpGCTarget)
;;
;; When we arrive at this label we're at the
;; guest code mapping of the switching code.
;;
ALIGNCODE(16)
GLOBALNAME JmpGCTarget
DEBUG_CHAR('-')
; load final cr3 and do far jump to load cs.
mov cr3, ebp ; ebp set above
DEBUG_CHAR('0')
;;
;; We're in VMM MMU context and VMM CS is loaded.
;; Setup the rest of the VMM state.
;;
; Load selectors
DEBUG_CHAR('1')
FIXUP FIX_HYPER_DS, 1
mov eax, 0ffffh
mov ds, eax
mov es, eax
xor eax, eax
mov gs, eax
mov fs, eax
; Load pCpum into EDX
FIXUP FIX_GC_CPUMCPU_OFF, 1, 0
mov edx, 0ffffffffh
; Activate guest IDT
DEBUG_CHAR('2')
lidt [edx + CPUMCPU.Hyper.idtr]
; Setup the stack.
DEBUG_CHAR('3')
mov ax, [edx + CPUMCPU.Hyper.ss.Sel]
mov ss, ax
mov esp, [edx + CPUMCPU.Hyper.esp]
; Restore TSS selector; must mark it as not busy before using ltr (!)
DEBUG_S_CHAR('4')
FIXUP FIX_GC_TSS_GDTE_DW2, 2
and dword [0ffffffffh], ~0200h ; clear busy flag (2nd type2 bit)
DEBUG_S_CHAR('5')
ltr word [edx + CPUMCPU.Hyper.tr.Sel]
DEBUG_S_CHAR('6')
; Activate the ldt (now we can safely crash).
lldt [edx + CPUMCPU.Hyper.ldtr.Sel]
DEBUG_S_CHAR('7')
;; Use flags.
mov esi, [edx + CPUMCPU.fUseFlags]
; debug registers
test esi, CPUM_USE_DEBUG_REGS_HYPER
jnz htg_debug_regs_guest
htg_debug_regs_guest_done:
DEBUG_S_CHAR('9')
; General registers (sans edx).
mov eax, [edx + CPUMCPU.Hyper.eax]
mov ebx, [edx + CPUMCPU.Hyper.ebx]
mov ecx, [edx + CPUMCPU.Hyper.ecx]
mov ebp, [edx + CPUMCPU.Hyper.ebp]
mov esi, [edx + CPUMCPU.Hyper.esi]
mov edi, [edx + CPUMCPU.Hyper.edi]
DEBUG_S_CHAR('!')
;;
;; Return to the VMM code which either called the switcher or
;; the code set up to run by HC.
;;
push dword [edx + CPUMCPU.Hyper.eflags]
push cs
push dword [edx + CPUMCPU.Hyper.eip]
mov edx, [edx + CPUMCPU.Hyper.edx] ; !! edx is no longer pointing to CPUMCPU here !!
%ifdef DEBUG_STUFF
COM32_S_PRINT ';eip='
push eax
mov eax, [esp + 8]
COM32_S_DWORD_REG eax
pop eax
COM32_S_CHAR ';'
%endif
%ifdef VBOX_WITH_STATISTICS
push eax
FIXUP FIX_GC_VM_OFF, 1, VM.StatSwitcherToGC
mov eax, 0ffffffffh
STAM32_PROFILE_ADV_STOP eax
pop eax
%endif
iret ; Use iret to make debugging and TF/RF work.
;;
; Detour for saving host DR0-3 and loading hypervisor debug registers.
; esi and edx must be preserved.
htg_debug_regs_guest:
DEBUG_S_CHAR('D')
DEBUG_S_CHAR('R')
DEBUG_S_CHAR('x')
; load hyper DR0-7
mov ebx, [edx + CPUMCPU.Hyper.dr]
mov dr0, ebx
mov ecx, [edx + CPUMCPU.Hyper.dr + 8*1]
mov dr1, ecx
mov eax, [edx + CPUMCPU.Hyper.dr + 8*2]
mov dr2, eax
mov ebx, [edx + CPUMCPU.Hyper.dr + 8*3]
mov dr3, ebx
mov ecx, X86_DR6_INIT_VAL
mov dr6, ecx
mov eax, [edx + CPUMCPU.Hyper.dr + 8*7]
mov dr7, eax
or dword [edx + CPUMCPU.fUseFlags], CPUM_USED_DEBUG_REGS_HYPER
jmp htg_debug_regs_guest_done
ENDPROC vmmR0ToRawModeAsm
;;
; Trampoline for doing a call when starting the hyper visor execution.
;
; Push any arguments to the routine.
; Push the argument frame size (cArg * 4).
; Push the call target (_cdecl convention).
; Push the address of this routine.
;
;
ALIGNCODE(16)
BEGINPROC vmmRCCallTrampoline
%ifdef DEBUG_STUFF
COM32_S_CHAR 'c'
COM32_S_CHAR 't'
COM32_S_CHAR '!'
%endif
; call routine
pop eax ; call address
pop edi ; argument count.
%ifdef DEBUG_STUFF
COM32_S_PRINT ';eax='
COM32_S_DWORD_REG eax
COM32_S_CHAR ';'
%endif
call eax ; do call
add esp, edi ; cleanup stack
; return to the host context (eax = C returncode).
%ifdef DEBUG_STUFF
COM32_S_CHAR '`'
%endif
.to_host_again:
call NAME(vmmRCToHostAsm)
mov eax, VERR_VMM_SWITCHER_IPE_1
jmp .to_host_again
ENDPROC vmmRCCallTrampoline
;;
; The C interface.
;
ALIGNCODE(16)
BEGINPROC vmmRCToHost
%ifdef DEBUG_STUFF
push esi
COM_NEWLINE
DEBUG_CHAR('b')
DEBUG_CHAR('a')
DEBUG_CHAR('c')
DEBUG_CHAR('k')
DEBUG_CHAR('!')
COM_NEWLINE
pop esi
%endif
mov eax, [esp + 4]
jmp NAME(vmmRCToHostAsm)
ENDPROC vmmRCToHost
;;
; vmmRCToHostAsmNoReturn
;
; This is an entry point used by TRPM when dealing with raw-mode traps,
; i.e. traps in the hypervisor code. This will not return and saves no
; state, because the caller has already saved the state.
;
; @param eax Return code.
;
ALIGNCODE(16)
BEGINPROC vmmRCToHostAsmNoReturn
DEBUG_S_CHAR('%')
%ifdef VBOX_WITH_STATISTICS
FIXUP FIX_GC_VM_OFF, 1, VM.StatTotalInGC
mov edx, 0ffffffffh
STAM32_PROFILE_ADV_STOP edx
FIXUP FIX_GC_VM_OFF, 1, VM.StatTotalGCToQemu
mov edx, 0ffffffffh
STAM32_PROFILE_ADV_START edx
FIXUP FIX_GC_VM_OFF, 1, VM.StatSwitcherToHC
mov edx, 0ffffffffh
STAM32_PROFILE_ADV_START edx
%endif
FIXUP FIX_GC_CPUMCPU_OFF, 1, 0
mov edx, 0ffffffffh
jmp vmmRCToHostAsm_SaveNoGeneralRegs
ENDPROC vmmRCToHostAsmNoReturn
;;
; vmmRCToHostAsm
;
; This is an entry point used by TRPM to return to host context when an
; interrupt occured or an guest trap needs handling in host context. It
; is also used by the C interface above.
;
; The hypervisor context is saved and it will return to the caller if
; host context so desires.
;
; @param eax Return code.
; @uses eax, edx, ecx (or it may use them in the future)
;
ALIGNCODE(16)
BEGINPROC vmmRCToHostAsm
DEBUG_S_CHAR('%')
push edx
%ifdef VBOX_WITH_STATISTICS
FIXUP FIX_GC_VM_OFF, 1, VM.StatTotalInGC
mov edx, 0ffffffffh
STAM32_PROFILE_ADV_STOP edx
FIXUP FIX_GC_VM_OFF, 1, VM.StatTotalGCToQemu
mov edx, 0ffffffffh
STAM32_PROFILE_ADV_START edx
FIXUP FIX_GC_VM_OFF, 1, VM.StatSwitcherToHC
mov edx, 0ffffffffh
STAM32_PROFILE_ADV_START edx
%endif
;
; Load the CPUM pointer.
;
FIXUP FIX_GC_CPUMCPU_OFF, 1, 0
mov edx, 0ffffffffh
; Save register context.
pop dword [edx + CPUMCPU.Hyper.edx]
pop dword [edx + CPUMCPU.Hyper.eip] ; call return from stack
mov dword [edx + CPUMCPU.Hyper.esp], esp
mov dword [edx + CPUMCPU.Hyper.eax], eax
mov dword [edx + CPUMCPU.Hyper.ebx], ebx
mov dword [edx + CPUMCPU.Hyper.ecx], ecx
mov dword [edx + CPUMCPU.Hyper.esi], esi
mov dword [edx + CPUMCPU.Hyper.edi], edi
mov dword [edx + CPUMCPU.Hyper.ebp], ebp
; special registers which may change.
vmmRCToHostAsm_SaveNoGeneralRegs:
%ifdef STRICT_IF
pushf
pop ecx
test ecx, X86_EFL_IF
jz .if_clear_out
mov eax, 0c0ffee01h
cli
.if_clear_out:
%endif
mov edi, eax ; save return code in EDI (careful with COM_DWORD_REG from here on!)
; str [edx + CPUMCPU.Hyper.tr] - double fault only, and it won't be right then either.
sldt [edx + CPUMCPU.Hyper.ldtr.Sel]
; No need to save CRx here. They are set dynamically according to Guest/Host requirements.
; FPU context is saved before restore of host saving (another) branch.
; Disable debug registers if active so they cannot trigger while switching.
test dword [edx + CPUMCPU.fUseFlags], CPUM_USED_DEBUG_REGS_HYPER
jz .gth_disabled_dr7
mov eax, X86_DR7_INIT_VAL
mov dr7, eax
.gth_disabled_dr7:
;;
;; Load Intermediate memory context.
;;
FIXUP SWITCHER_FIX_INTER_CR3_GC, 1
mov eax, 0ffffffffh
mov cr3, eax
DEBUG_CHAR('?')
;; We're now in intermediate memory context!
;;
;; 0. Jump to identity mapped location
;;
FIXUP FIX_GC_2_ID_NEAR_REL, 1, NAME(IDExitTarget) - NAME(Start)
jmp near NAME(IDExitTarget)
; We're now on identity mapped pages!
ALIGNCODE(16)
GLOBALNAME IDExitTarget
DEBUG_CHAR('1')
; 1. Disable paging.
mov ebx, cr0
and ebx, ~X86_CR0_PG
mov cr0, ebx
DEBUG_CHAR('2')
; 2. Enable PAE.
%ifdef SWITCHER_TO_PAE
; - already enabled
%else
mov ecx, cr4
or ecx, X86_CR4_PAE
mov cr4, ecx
%endif
; 3. Load long mode intermediate CR3.
FIXUP FIX_INTER_AMD64_CR3, 1
mov ecx, 0ffffffffh
mov cr3, ecx
DEBUG_CHAR('3')
; 4. Enable long mode.
mov ebp, edx
mov ecx, MSR_K6_EFER
rdmsr
or eax, MSR_K6_EFER_LME
wrmsr
mov edx, ebp
DEBUG_CHAR('4')
; 5. Enable paging.
or ebx, X86_CR0_PG
mov cr0, ebx
DEBUG_CHAR('5')
; Jump from compatibility mode to 64-bit mode.
FIXUP FIX_ID_FAR32_TO_64BIT_MODE, 1, NAME(IDExit64Mode) - NAME(Start)
jmp 0ffffh:0fffffffeh
;
; We're in 64-bit mode (ds, ss, es, fs, gs are all bogus).
; Move on to the HC mapping.
;
BITS 64
ALIGNCODE(16)
NAME(IDExit64Mode):
DEBUG_CHAR('6')
jmp [NAME(pHCExitTarget) wrt rip]
; 64-bit jump target
NAME(pHCExitTarget):
FIXUP FIX_HC_64BIT, 0, NAME(HCExitTarget) - NAME(Start)
dq 0ffffffffffffffffh
; 64-bit pCpum address.
NAME(pCpumHC):
FIXUP FIX_HC_64BIT_CPUM, 0
dq 0ffffffffffffffffh
;
; When we arrive here we're at the host context
; mapping of the switcher code.
;
ALIGNCODE(16)
GLOBALNAME HCExitTarget
DEBUG_CHAR('9')
; Clear high dword of the CPUMCPU pointer
and rdx, 0ffffffffh
; load final cr3
mov rsi, [rdx + CPUMCPU.Host.cr3]
mov cr3, rsi
DEBUG_CHAR('@')
;;
;; Restore Host context.
;;
; Load CPUM pointer into edx
mov rdx, [NAME(pCpumHC) wrt rip]
; Load the CPUMCPU offset.
mov r8d, [rdx + CPUM.offCPUMCPU0]
; activate host gdt and idt
lgdt [rdx + r8 + CPUMCPU.Host.gdtr]
DEBUG_CHAR('0')
lidt [rdx + r8 + CPUMCPU.Host.idtr]
DEBUG_CHAR('1')
; Restore TSS selector; must mark it as not busy before using ltr (!)
%if 1 ; ASSUME that this is supposed to be 'BUSY'. (saves 20-30 ticks on the T42p)
movzx eax, word [rdx + r8 + CPUMCPU.Host.tr] ; eax <- TR
and al, 0F8h ; mask away TI and RPL bits, get descriptor offset.
add rax, [rdx + r8 + CPUMCPU.Host.gdtr + 2] ; eax <- GDTR.address + descriptor offset.
and dword [rax + 4], ~0200h ; clear busy flag (2nd type2 bit)
ltr word [rdx + r8 + CPUMCPU.Host.tr]
%else
movzx eax, word [rdx + r8 + CPUMCPU.Host.tr] ; eax <- TR
and al, 0F8h ; mask away TI and RPL bits, get descriptor offset.
add rax, [rdx + r8 + CPUMCPU.Host.gdtr + 2] ; eax <- GDTR.address + descriptor offset.
mov ecx, [rax + 4] ; ecx <- 2nd descriptor dword
mov ebx, ecx ; save original value
and ecx, ~0200h ; clear busy flag (2nd type2 bit)
mov [rax + 4], ccx ; not using xchg here is paranoia..
ltr word [rdx + r8 + CPUMCPU.Host.tr]
xchg [rax + 4], ebx ; using xchg is paranoia too...
%endif
; activate ldt
DEBUG_CHAR('2')
lldt [rdx + r8 + CPUMCPU.Host.ldtr]
; Restore segment registers
mov eax, [rdx + r8 + CPUMCPU.Host.ds]
mov ds, eax
mov eax, [rdx + r8 + CPUMCPU.Host.es]
mov es, eax
mov eax, [rdx + r8 + CPUMCPU.Host.fs]
mov fs, eax
mov eax, [rdx + r8 + CPUMCPU.Host.gs]
mov gs, eax
; restore stack
mov eax, [rdx + r8 + CPUMCPU.Host.ss]
mov ss, eax
mov rsp, [rdx + r8 + CPUMCPU.Host.rsp]
FIXUP FIX_NO_SYSENTER_JMP, 0, gth_sysenter_no - NAME(Start) ; this will insert a jmp gth_sysenter_no if host doesn't use sysenter.
; restore MSR_IA32_SYSENTER_CS register.
mov rbx, rdx ; save edx
mov ecx, MSR_IA32_SYSENTER_CS
mov eax, [rbx + r8 + CPUMCPU.Host.SysEnter.cs]
mov edx, [rbx + r8 + CPUMCPU.Host.SysEnter.cs + 4]
wrmsr ; MSR[ecx] <- edx:eax
mov rdx, rbx ; restore edx
jmp short gth_sysenter_no
ALIGNCODE(16)
gth_sysenter_no:
;; @todo AMD syscall
; Restore FPU if guest has used it.
; Using fxrstor should ensure that we're not causing unwanted exception on the host.
mov esi, [rdx + r8 + CPUMCPU.fUseFlags] ; esi == use flags.
test esi, CPUM_USED_FPU
jz gth_fpu_no
mov rcx, cr0
and rcx, ~(X86_CR0_TS | X86_CR0_EM)
mov cr0, rcx
mov r10, rdx ; Save rdx.
mov eax, [r10 + r8 + CPUMCPU.Guest.fXStateMask]
mov r9, [r10 + r8 + CPUMCPU.Guest.pXStateR0]
or eax, eax
jz gth_fpu_guest_fxsave
mov edx, [r10 + r8 + CPUMCPU.Guest.fXStateMask + 4]
xsave [r9]
jmp gth_fpu_host
gth_fpu_guest_fxsave:
fxsave [r9]
gth_fpu_host:
mov eax, [r10 + r8 + CPUMCPU.Host.fXStateMask]
mov r9, [r10 + r8 + CPUMCPU.Host.pXStateR0]
or eax, eax
jz gth_fpu_host_fxrstor
mov edx, [r10 + r8 + CPUMCPU.Host.fXStateMask + 4]
xrstor [r9] ; We saved 32-bit state, so only restore 32-bit.
jmp gth_fpu_done
gth_fpu_host_fxrstor:
fxrstor [r9] ; We saved 32-bit state, so only restore 32-bit.
gth_fpu_done:
mov rdx, r10 ; Restore rdx.
jmp gth_fpu_no
ALIGNCODE(16)
gth_fpu_no:
; Control registers.
; Would've liked to have these higher up in case of crashes, but
; the fpu stuff must be done before we restore cr0.
mov rcx, [rdx + r8 + CPUMCPU.Host.cr4]
test rcx, X86_CR4_PCIDE
jz gth_no_pcide
mov rax, [rdx + r8 + CPUMCPU.Host.cr3]
and rax, ~0xfff ; clear the PCID in cr3
mov cr3, rax
mov cr4, rcx
mov rax, [rdx + r8 + CPUMCPU.Host.cr3]
mov cr3, rax ; reload it with the right PCID.
jmp gth_restored_cr4
gth_no_pcide:
mov cr4, rcx
gth_restored_cr4:
mov rcx, [rdx + r8 + CPUMCPU.Host.cr0]
mov cr0, rcx
;mov rcx, [rdx + r8 + CPUMCPU.Host.cr2] ; assumes this is waste of time.
;mov cr2, rcx
; Restore MSRs
mov rbx, rdx
mov ecx, MSR_K8_FS_BASE
mov eax, [rbx + r8 + CPUMCPU.Host.FSbase]
mov edx, [rbx + r8 + CPUMCPU.Host.FSbase + 4]
wrmsr
mov ecx, MSR_K8_GS_BASE
mov eax, [rbx + r8 + CPUMCPU.Host.GSbase]
mov edx, [rbx + r8 + CPUMCPU.Host.GSbase + 4]
wrmsr
mov ecx, MSR_K6_EFER
mov eax, [rbx + r8 + CPUMCPU.Host.efer]
mov edx, [rbx + r8 + CPUMCPU.Host.efer + 4]
wrmsr
mov rdx, rbx
; Restore debug registers (if modified). (ESI must still be fUseFlags! Must be done late, at least after CR4!)
test esi, CPUM_USE_DEBUG_REGS_HOST | CPUM_USED_DEBUG_REGS_HOST | CPUM_USE_DEBUG_REGS_HYPER
jnz gth_debug_regs_restore
gth_debug_regs_done:
and dword [rdx + r8 + CPUMCPU.fUseFlags], ~(CPUM_USED_DEBUG_REGS_HOST | CPUM_USED_DEBUG_REGS_HYPER)
; Restore general registers.
mov eax, edi ; restore return code. eax = return code !!
; mov rax, [rdx + r8 + CPUMCPU.Host.rax] - scratch + return code
mov rbx, [rdx + r8 + CPUMCPU.Host.rbx]
; mov rcx, [rdx + r8 + CPUMCPU.Host.rcx] - scratch
; mov rdx, [rdx + r8 + CPUMCPU.Host.rdx] - scratch
mov rdi, [rdx + r8 + CPUMCPU.Host.rdi]
mov rsi, [rdx + r8 + CPUMCPU.Host.rsi]
mov rsp, [rdx + r8 + CPUMCPU.Host.rsp]
mov rbp, [rdx + r8 + CPUMCPU.Host.rbp]
; mov r8, [rdx + r8 + CPUMCPU.Host.r8 ] - scratch
; mov r9, [rdx + r8 + CPUMCPU.Host.r9 ] - scratch
mov r10, [rdx + r8 + CPUMCPU.Host.r10]
mov r11, [rdx + r8 + CPUMCPU.Host.r11]
mov r12, [rdx + r8 + CPUMCPU.Host.r12]
mov r13, [rdx + r8 + CPUMCPU.Host.r13]
mov r14, [rdx + r8 + CPUMCPU.Host.r14]
mov r15, [rdx + r8 + CPUMCPU.Host.r15]
; finally restore flags. (probably not required)
push qword [rdx + r8 + CPUMCPU.Host.rflags]
popf
%ifdef DEBUG_STUFF
COM64_S_CHAR '4'
%endif
db 048h
retf
;;
; Detour for restoring the host debug registers.
; edx and edi must be preserved.
gth_debug_regs_restore:
DEBUG_S_CHAR('d')
mov rax, dr7 ; Some DR7 paranoia first...
mov ecx, X86_DR7_INIT_VAL
cmp rax, rcx
je .gth_debug_skip_dr7_disabling
mov dr7, rcx
.gth_debug_skip_dr7_disabling:
test esi, CPUM_USED_DEBUG_REGS_HOST
jz .gth_debug_regs_dr7
DEBUG_S_CHAR('r')
mov rax, [rdx + r8 + CPUMCPU.Host.dr0]
mov dr0, rax
mov rbx, [rdx + r8 + CPUMCPU.Host.dr1]
mov dr1, rbx
mov rcx, [rdx + r8 + CPUMCPU.Host.dr2]
mov dr2, rcx
mov rax, [rdx + r8 + CPUMCPU.Host.dr3]
mov dr3, rax
.gth_debug_regs_dr7:
mov rbx, [rdx + r8 + CPUMCPU.Host.dr6]
mov dr6, rbx
mov rcx, [rdx + r8 + CPUMCPU.Host.dr7]
mov dr7, rcx
; We clear the USED flags in the main code path.
jmp gth_debug_regs_done
ENDPROC vmmRCToHostAsm
GLOBALNAME End
;
; The description string (in the text section).
;
NAME(Description):
db SWITCHER_DESCRIPTION
db 0
extern NAME(Relocate)
;
; End the fixup records.
;
BEGINDATA
db FIX_THE_END ; final entry.
GLOBALNAME FixupsEnd
;;
; The switcher definition structure.
ALIGNDATA(16)
GLOBALNAME Def
istruc VMMSWITCHERDEF
at VMMSWITCHERDEF.pvCode, RTCCPTR_DEF NAME(Start)
at VMMSWITCHERDEF.pvFixups, RTCCPTR_DEF NAME(Fixups)
at VMMSWITCHERDEF.pszDesc, RTCCPTR_DEF NAME(Description)
at VMMSWITCHERDEF.pfnRelocate, RTCCPTR_DEF NAME(Relocate)
at VMMSWITCHERDEF.enmType, dd SWITCHER_TYPE
at VMMSWITCHERDEF.cbCode, dd NAME(End) - NAME(Start)
at VMMSWITCHERDEF.offR0ToRawMode, dd NAME(vmmR0ToRawMode) - NAME(Start)
at VMMSWITCHERDEF.offRCToHost, dd NAME(vmmRCToHost) - NAME(Start)
at VMMSWITCHERDEF.offRCCallTrampoline, dd NAME(vmmRCCallTrampoline) - NAME(Start)
at VMMSWITCHERDEF.offRCToHostAsm, dd NAME(vmmRCToHostAsm) - NAME(Start)
at VMMSWITCHERDEF.offRCToHostAsmNoReturn, dd NAME(vmmRCToHostAsmNoReturn) - NAME(Start)
; disasm help
at VMMSWITCHERDEF.offHCCode0, dd 0
at VMMSWITCHERDEF.cbHCCode0, dd NAME(IDEnterTarget) - NAME(Start)
at VMMSWITCHERDEF.offHCCode1, dd NAME(HCExitTarget) - NAME(Start)
at VMMSWITCHERDEF.cbHCCode1, dd NAME(End) - NAME(HCExitTarget)
at VMMSWITCHERDEF.offIDCode0, dd NAME(IDEnterTarget) - NAME(Start)
at VMMSWITCHERDEF.cbIDCode0, dd NAME(JmpGCTarget) - NAME(IDEnterTarget)
at VMMSWITCHERDEF.offIDCode1, dd NAME(IDExitTarget) - NAME(Start)
at VMMSWITCHERDEF.cbIDCode1, dd NAME(HCExitTarget) - NAME(IDExitTarget)
at VMMSWITCHERDEF.offGCCode, dd NAME(JmpGCTarget) - NAME(Start)
at VMMSWITCHERDEF.cbGCCode, dd NAME(IDExitTarget) - NAME(JmpGCTarget)
iend