CPUMAllRegs.cpp revision b3059c631542aaf3c8c060c72ae79477806d6e3d
/* $Id$ */
/** @file
* CPUM - CPU Monitor(/Manager) - Gets and Sets.
*/
/*
* Copyright (C) 2006 InnoTek Systemberatung GmbH
*
* This file is part of VirtualBox Open Source Edition (OSE), as
* available from http://www.virtualbox.org. This file is free software;
* General Public License as published by the Free Software Foundation,
* in version 2 as it comes in the "COPYING" file of the VirtualBox OSE
* distribution. VirtualBox OSE is distributed in the hope that it will
* be useful, but WITHOUT ANY WARRANTY of any kind.
*
* If you received this file as part of a commercial VirtualBox
* distribution, then only the terms of your commercial VirtualBox
* license agreement apply instead of the previous paragraph.
*/
/*******************************************************************************
* Header Files *
*******************************************************************************/
#define LOG_GROUP LOG_GROUP_CPUM
#include "CPUMInternal.h"
/** Disable stack frame pointer generation here. */
#endif
/**
* Sets or resets an alternative hypervisor context core.
*
* This is called when we get a hypervisor trap set switch the context
* core with the trap frame on the stack. It is called again to reset
* back to the default context core when resuming hypervisor execution.
*
* @param pVM The VM handle.
* @param pCtxCore Pointer to the alternative context core or NULL
* to go back to the default context core.
*/
{
if (!pCtxCore)
{
#ifdef IN_GC
#else
#endif
}
else
{
#ifdef IN_GC
#else
#endif
}
}
/**
* Gets the pointer to the internal CPUMCTXCORE structure for the hypervisor.
* This is only for reading in order to save a few calls.
*
* @param pVM Handle to the virtual machine.
*/
{
}
/**
* Queries the pointer to the internal CPUMCTX structure for the hypervisor.
*
* @returns VBox status code.
* @param pVM Handle to the virtual machine.
* @param ppCtx Receives the hyper CPUMCTX pointer when successful.
*
* @deprecated This will *not* (and has never) given the right picture of the
* hypervisor register state. With CPUMHyperSetCtxCore() this is
* getting much worse. So, use the individual functions for getting
* and esp. setting the hypervisor registers.
*/
{
return VINF_SUCCESS;
}
{
}
{
}
{
}
{
}
{
}
{
}
{
}
{
}
{
}
{
}
{
return VINF_SUCCESS;
}
{
}
{
}
{
}
{
/** @todo in GC we must load it! */
}
{
/** @todo in GC we must load it! */
}
{
/** @todo in GC we must load it! */
}
{
/** @todo in GC we must load it! */
}
{
/** @todo in GC we must load it! */
}
{
/** @todo in GC we must load it! */
}
{
}
{
}
{
}
{
}
{
}
{
}
#if 0 /* these are not correct. */
{
}
{
}
{
}
{
}
#endif /* not correct */
{
}
{
}
{
}
{
}
{
}
{
}
{
}
{
}
{
}
{
}
{
if (pcbLimit)
}
{
if (pcbLimit)
}
{
}
{
}
{
}
{
}
{
}
{
}
{
}
/**
* Gets the pointer to the internal CPUMCTXCORE structure.
* This is only for reading in order to save a few calls.
*
* @param pVM Handle to the virtual machine.
*/
{
}
/**
* Sets the guest context core registers.
*
* @param pVM Handle to the virtual machine.
* @param pCtxCore The new context core values.
*/
{
/** @todo #1410 requires selectors to be checked. */
*pCtxCoreDst = *pCtxCore;
}
/**
* Queries the pointer to the internal CPUMCTX structure
*
* @returns VBox status code.
* @param pVM Handle to the virtual machine.
* @param ppCtx Receives the CPUMCTX pointer when successful.
*/
{
return VINF_SUCCESS;
}
{
return VINF_SUCCESS;
}
{
return VINF_SUCCESS;
}
{
return VINF_SUCCESS;
}
{
return VINF_SUCCESS;
}
{
return VINF_SUCCESS;
}
{
return VINF_SUCCESS;
}
{
return VINF_SUCCESS;
}
{
if (!CPUMSupportsFXSR(pVM))
cr4 &= ~X86_CR4_OSFSXR;
return VINF_SUCCESS;
}
{
return VINF_SUCCESS;
}
{
return VINF_SUCCESS;
}
{
return VINF_SUCCESS;
}
{
return VINF_SUCCESS;
}
{
return VINF_SUCCESS;
}
{
return VINF_SUCCESS;
}
{
return VINF_SUCCESS;
}
{
return VINF_SUCCESS;
}
{
return VINF_SUCCESS;
}
{
return VINF_SUCCESS;
}
{
return VINF_SUCCESS;
}
{
return VINF_SUCCESS;
}
{
return VINF_SUCCESS;
}
{
return VINF_SUCCESS;
}
{
return VINF_SUCCESS;
}
{
return VINF_SUCCESS;
}
{
if (pcbLimit)
}
{
}
{
}
{
}
{
}
{
}
{
}
{
}
{
}
{
}
{
}
{
}
{
}
{
}
{
}
{
}
{
}
{
}
{
}
{
}
{
}
{
}
{
}
{
}
{
}
//@todo: crx should be an array
{
switch (iReg)
{
case USE_REG_CR0:
break;
case USE_REG_CR2:
break;
case USE_REG_CR3:
break;
case USE_REG_CR4:
break;
default:
return VERR_INVALID_PARAMETER;
}
return VINF_SUCCESS;
}
{
}
{
}
{
}
{
}
{
}
{
}
/** @todo drx should be an array */
{
switch (iReg)
{
case USE_REG_DR0:
break;
case USE_REG_DR1:
break;
case USE_REG_DR2:
break;
case USE_REG_DR3:
break;
case USE_REG_DR4:
case USE_REG_DR6:
break;
case USE_REG_DR5:
case USE_REG_DR7:
break;
default:
return VERR_INVALID_PARAMETER;
}
return VINF_SUCCESS;
}
/**
* Gets a CpuId leaf.
*
* @param pVM The VM handle.
* @param iLeaf The CPUID leaf to get.
* @param pEax Where to store the EAX value.
* @param pEbx Where to store the EBX value.
* @param pEcx Where to store the ECX value.
* @param pEdx Where to store the EDX value.
*/
CPUMDECL(void) CPUMGetGuestCpuId(PVM pVM, uint32_t iLeaf, uint32_t *pEax, uint32_t *pEbx, uint32_t *pEcx, uint32_t *pEdx)
{
else
Log2(("CPUMGetGuestCpuId: iLeaf=%#010x %RX32 %RX32 %RX32 %RX32\n", iLeaf, *pEax, *pEbx, *pEcx, *pEdx));
}
/**
* Gets a pointer to the array of standard CPUID leafs.
*
* CPUMGetGuestCpuIdStdMax() give the size of the array.
*
* @returns Pointer to the standard CPUID leafs (read-only).
* @param pVM The VM handle.
* @remark Intended for PATM.
*/
{
}
/**
* Gets a pointer to the array of extended CPUID leafs.
*
* CPUMGetGuestCpuIdExtMax() give the size of the array.
*
* @returns Pointer to the extended CPUID leafs (read-only).
* @param pVM The VM handle.
* @remark Intended for PATM.
*/
{
}
/**
* Gets a pointer to the default CPUID leaf.
*
* @returns Pointer to the default CPUID leaf (read-only).
* @param pVM The VM handle.
* @remark Intended for PATM.
*/
{
}
/**
* Gets a number of standard CPUID leafs.
*
* @returns Number of leafs.
* @param pVM The VM handle.
* @remark Intended for PATM.
*/
{
}
/**
* Gets a number of extended CPUID leafs.
*
* @returns Number of leafs.
* @param pVM The VM handle.
* @remark Intended for PATM.
*/
{
}
/**
* Sets a CPUID feature bit.
*
* @param pVM The VM Handle.
* @param enmFeature The feature to set.
*/
{
switch (enmFeature)
{
/*
* Set the APIC bit in both feature masks.
*/
case CPUMCPUIDFEATURE_APIC:
Log(("CPUMSetGuestCpuIdFeature: Enabled APIC\n"));
break;
/*
* Assumes the caller knows what it's doing! (host must support these)
*/
case CPUMCPUIDFEATURE_SEP:
{
if (!(ulEdx & X86_CPUID_FEATURE_EDX_SEP))
{
AssertMsgFailed(("ERROR: Can't turn on SEP when the host doesn't support it!!\n"));
return;
}
break;
}
default:
break;
}
}
/**
* Clears a CPUID feature bit.
*
* @param pVM The VM Handle.
* @param enmFeature The feature to clear.
*/
{
switch (enmFeature)
{
/*
* Set the APIC bit in both feature masks.
*/
case CPUMCPUIDFEATURE_APIC:
Log(("CPUMSetGuestCpuIdFeature: Disabled APIC\n"));
break;
default:
break;
}
}
{
return CPUMRecalcHyperDRx(pVM);
}
{
return CPUMRecalcHyperDRx(pVM);
}
{
return CPUMRecalcHyperDRx(pVM);
}
{
return CPUMRecalcHyperDRx(pVM);
}
{
return CPUMRecalcHyperDRx(pVM);
}
{
return CPUMRecalcHyperDRx(pVM);
}
/** @todo drx should be an array */
{
switch (iReg)
{
case USE_REG_DR0:
break;
case USE_REG_DR1:
break;
case USE_REG_DR2:
break;
case USE_REG_DR3:
break;
case USE_REG_DR4:
case USE_REG_DR6:
break;
case USE_REG_DR5:
case USE_REG_DR7:
break;
default:
return VERR_INVALID_PARAMETER;
}
return CPUMRecalcHyperDRx(pVM);
}
/**
* Recalculates the hypvervisor DRx register values based on
* current guest registers and DBGF breakpoints.
*
* This is called whenever a guest DRx register is modified and when DBGF
* sets a hardware breakpoint. In guest context this function will reload
* any (hyper) DRx registers which comes out with a different value.
*
* @returns VINF_SUCCESS.
* @param pVM The VM handle.
*/
{
/*
* Compare the DR7s first.
*
* We only care about the enabled flags. The GE and LE flags are always
* set and we don't care if the guest doesn't set them. GD is virtualized
* when we dispatch #DB, we never enable it.
*/
#ifdef CPUM_VIRTUALIZE_DRX
#else
const RTGCUINTREG uGstDr7 = 0;
#endif
{
/*
* Ok, something is enabled. Recalc each of the breakpoints.
*/
/* bp 0 */
{
}
{
}
else
/* bp 1 */
{
}
{
}
else
/* bp 2 */
{
}
{
}
else
/* bp 3 */
{
}
{
}
else
/*
* Apply the updates.
*/
#ifdef IN_GC
{
/** @todo save host DBx registers. */
}
#endif
}
else
{
#ifdef IN_GC
{
/** @todo restore host DBx registers. */
}
#endif
}
Log2(("CPUMRecalcHyperDRx: fUseFlags=%#x %RGr %RGr %RGr %RGr %RGr %RGr\n",
return VINF_SUCCESS;
}
#ifndef IN_RING0 /** @todo I don't think we need this in R0, so move it to CPUMAll.cpp? */
/**
* Transforms the guest CPU state to raw-ring mode.
*
* This function will change the any of the cs and ss register with DPL=0 to DPL=1.
*
* @returns VBox status. (recompiler failure)
* @param pVM VM handle.
* @param pCtxCore The context core (for trap usage).
* @see @ref pg_raw
*/
{
if (!pCtxCore)
/*
* Are we in Ring-0?
*/
{
/*
* Enter execution mode.
*/
/*
* Set CPL to Ring-1.
*/
}
else
{
("ring-1 code not supported\n"));
/*
* PATM takes care of IOPL and IF flags for Ring-3 and Ring-2 code as well.
*/
}
/*
* Assert sanity.
*/
Assert((pVM->cpum.s.Guest.cr0 & (X86_CR0_PG | X86_CR0_WP | X86_CR0_PE)) == (X86_CR0_PG | X86_CR0_PE | X86_CR0_WP));
return VINF_SUCCESS;
}
/**
* Transforms the guest CPU state from raw-ring mode to correct values.
*
* This function will change any selector registers with DPL=1 to DPL=0.
*
* @returns Adjusted rc.
* @param pVM VM handle.
* @param rc Raw mode return code
* @param pCtxCore The context core (for trap usage).
* @see @ref pg_raw
*/
{
/*
* Don't leave if we've already left (in GC).
*/
return rc;
if (!pCtxCore)
AssertMsg(pCtxCore->eflags.Bits.u1VM || pCtxCore->eflags.Bits.u2IOPL < (unsigned)(pCtxCore->ss & X86_SEL_RPL),
/*
* Are we executing in raw ring-1?
*/
{
/*
* Leave execution mode.
*/
/* Not quite sure if this is really required, but shouldn't harm (too much anyways). */
/** @todo See what happens if we remove this. */
/*
* Ring-1 selector => Ring-0.
*/
}
else
{
/*
* PATM is taking care of the IOPL and IF flags for us.
*/
{
/** @todo See what happens if we remove this. */
}
}
return rc;
}
/**
* Updates the EFLAGS while we're in raw-mode.
*
* @param pVM The VM handle.
* @param pCtxCore The context core.
* @param eflags The new EFLAGS value.
*/
{
{
return;
}
}
#endif /* !IN_RING0 */
/**
* Gets the EFLAGS while we're in raw-mode.
*
* @returns The eflags.
* @param pVM The VM handle.
* @param pCtxCore The context core.
*/
{
#ifdef IN_RING0
#else
#endif
}
/**
* Gets and resets the changed flags (CPUM_CHANGED_*).
* Only REM should call this function.
*
* @returns The changed flags.
* @param pVM The VM handle.
*/
{
/** @todo change the switcher to use the fChanged flags. */
{
}
return fFlags;
}
/**
* Sets the specified changed flags (CPUM_CHANGED_*).
*
* @param pVM The VM handle.
*/
{
}
/**
* Checks if the CPU supports the FXSAVE and FXRSTOR instruction.
* @returns true if supported.
* @returns false if not supported.
* @param pVM The VM handle.
*/
{
}
/**
* Checks if the host OS uses the SYSENTER / SYSEXIT instructions.
* @returns true if used.
* @returns false if not used.
* @param pVM The VM handle.
*/
{
}
/**
* Checks if the host OS uses the SYSCALL / SYSRET instructions.
* @returns true if used.
* @returns false if not used.
* @param pVM The VM handle.
*/
{
}
/**
*
* @returns VBox status code.
* @param pVM VM handle.
*/
{
}
/**
*
* @returns VBox status code.
* @param pVM VM handle.
*/
{
}
/**
* @returns true if we did.
* @returns false if not.
* @param pVM The VM handle.
*/
{
}
/**
* @param pVM The VM handle.
*/
{
}
/**
* Checks if the hidden selector registers are valid
* @returns true if they are.
* @returns false if not.
* @param pVM The VM handle.
*/
{
}
/**
* Checks if the hidden selector registers are valid
* @param pVM The VM handle.
* @param fValid Valid or not
*/
{
}