IScsiProto.h revision 4fd606d1f5abe38e1f42c38de1d2e895166bd0f4
/** @file
The header file of iSCSI Protocol that defines many specific data structures.
Copyright (c) 2004 - 2012, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#ifndef _ISCSI_PROTO_H_
#define _ISCSI_PROTO_H_
//
// RFC 1982 Serial Number Arithmetic, SERIAL_BITS = 32
//
( \
)
( \
)
#define ISCSI_WELL_KNOWN_PORT 3260
#define ISCSI_MAX_CONNS_PER_SESSION 1
#define DEFAULT_MAX_RECV_DATA_SEG_LEN 8192
#define MAX_RECV_DATA_SEG_LEN_IN_FFP 65536
#define DEFAULT_MAX_OUTSTANDING_R2T 1
#define ISCSI_VERSION_MAX 0x00
#define ISCSI_VERSION_MIN 0x00
#define ISCSI_KEY_AUTH_METHOD "AuthMethod"
#define ISCSI_KEY_HEADER_DIGEST "HeaderDigest"
#define ISCSI_KEY_DATA_DIGEST "DataDigest"
#define ISCSI_KEY_MAX_CONNECTIONS "MaxConnections"
#define ISCSI_KEY_TARGET_NAME "TargetName"
#define ISCSI_KEY_INITIATOR_NAME "InitiatorName"
#define ISCSI_KEY_TARGET_ALIAS "TargetAlias"
#define ISCSI_KEY_INITIATOR_ALIAS "InitiatorAlias"
#define ISCSI_KEY_TARGET_ADDRESS "TargetAddress"
#define ISCSI_KEY_INITIAL_R2T "InitialR2T"
#define ISCSI_KEY_IMMEDIATE_DATA "ImmediateData"
#define ISCSI_KEY_TARGET_PORTAL_GROUP_TAG "TargetPortalGroupTag"
#define ISCSI_KEY_MAX_BURST_LENGTH "MaxBurstLength"
#define ISCSI_KEY_FIRST_BURST_LENGTH "FirstBurstLength"
#define ISCSI_KEY_DEFAULT_TIME2WAIT "DefaultTime2Wait"
#define ISCSI_KEY_DEFAULT_TIME2RETAIN "DefaultTime2Retain"
#define ISCSI_KEY_MAX_OUTSTANDING_R2T "MaxOutstandingR2T"
#define ISCSI_KEY_DATA_PDU_IN_ORDER "DataPDUInOrder"
#define ISCSI_KEY_DATA_SEQUENCE_IN_ORDER "DataSequenceInOrder"
#define ISCSI_KEY_ERROR_RECOVERY_LEVEL "ErrorRecoveryLevel"
#define ISCSI_KEY_SESSION_TYPE "SessionType"
#define ISCSI_KEY_MAX_RECV_DATA_SEGMENT_LENGTH "MaxRecvDataSegmentLength"
#define ISCSI_KEY_VALUE_NONE "None"
///
/// connection state for initiator
///
#define CONN_STATE_FREE 0
#define CONN_STATE_XPT_WAIT 1
#define CONN_STATE_IN_LOGIN 2
#define CONN_STATE_LOGGED_IN 3
#define CONN_STATE_IN_LOGOUT 4
#define CONN_STATE_LOGOUT_REQUESTED 5
#define CONN_STATE_CLEANUP_WAIT 6
#define CONN_STATE_IN_CLEANUP 7
///
/// session state for initiator
///
#define SESSION_STATE_FREE 0
#define SESSION_STATE_LOGGED_IN 1
#define SESSION_STATE_FAILED 2
#define ISCSI_RESERVED_TAG 0xffffffff
#define ISCSI_REQ_IMMEDIATE 0x40
#define ISCSI_OPCODE_MASK 0x3F
#define ISCSI_SET_OPCODE(PduHdr, Op, Flgs) ((((ISCSI_BASIC_HEADER *) (PduHdr))->OpCode) = ((Op) | (Flgs)))
#define ISCSI_FLAG_ON(PduHdr, Flag) ((BOOLEAN) ((((ISCSI_BASIC_HEADER *) (PduHdr))->Flags & (Flag)) == (Flag)))
#define ISCSI_SET_STAGES(PduHdr, Cur, Nxt) ((PduHdr)->Flags = (UINT8) ((PduHdr)->Flags | ((Cur) << 2 | (Nxt))))
do { \
} while (0);
#define ISCSI_SET_DATASEG_LEN(PduHdr, Len) HTON24 (((ISCSI_BASIC_HEADER *) (PduHdr))->DataSegmentLength, (Len))
//
// Initiator opcodes.
//
#define ISCSI_OPCODE_NOP_OUT 0x00
#define ISCSI_OPCODE_SCSI_CMD 0x01
#define ISCSI_OPCODE_SCSI_TMF_REQ 0x02
#define ISCSI_OPCODE_LOGIN_REQ 0x03
#define ISCSI_OPCODE_TEXT_REQ 0x04
#define ISCSI_OPCODE_SCSI_DATA_OUT 0x05
#define ISCSI_OPCODE_LOGOUT_REQ 0x06
#define ISCSI_OPCODE_SNACK_REQ 0x10
#define ISCSI_OPCODE_VENDOR_I0 0x1c
#define ISCSI_OPCODE_VENDOR_I1 0x1d
#define ISCSI_OPCODE_VENDOR_I2 0x1e
//
// Target opcodes.
//
#define ISCSI_OPCODE_NOP_IN 0x20
#define ISCSI_OPCODE_SCSI_RSP 0x21
#define ISCSI_OPCODE_SCSI_TMF_RSP 0x22
#define ISCSI_OPCODE_LOGIN_RSP 0x23
#define ISCSI_OPCODE_TEXT_RSP 0x24
#define ISCSI_OPCODE_SCSI_DATA_IN 0x25
#define ISCSI_OPCODE_LOGOUT_RSP 0x26
#define ISCSI_OPCODE_R2T 0x31
#define ISCSI_OPCODE_ASYNC_MSG 0x32
#define ISCSI_OPCODE_VENDOR_T0 0x3c
#define ISCSI_OPCODE_VENDOR_T1 0x3d
#define ISCSI_OPCODE_VENDOR_T2 0x3e
#define ISCSI_OPCODE_REJECT 0x3f
#define ISCSI_BHS_FLAG_FINAL 0x80
//
// Defined AHS types, others are reserved.
//
#define ISCSI_AHS_TYPE_EXT_CDB 0x1
#define ISCSI_AHS_TYPE_BI_EXP_READ_DATA_LEN 0x2
#define SCSI_CMD_PDU_FLAG_READ 0x40
#define SCSI_CMD_PDU_FLAG_WRITE 0x20
#define ISCSI_CMD_PDU_TASK_ATTR_MASK 0x07
//
// task attributes
//
#define ISCSI_TASK_ATTR_UNTAGGED 0x00
#define ISCSI_TASK_ATTR_SIMPLE 0x01
#define ISCSI_TASK_ATTR_ORDERD 0x02
#define ISCSI_TASK_ATTR_HOQ 0x03
#define ISCSI_TASK_ATTR_ACA 0x04
//
// Flag bit definitions in SCSI response.
//
#define SCSI_RSP_PDU_FLAG_BI_READ_OVERFLOW 0x10
#define SCSI_RSP_PDU_FLAG_BI_READ_UNDERFLOW 0x08
#define SCSI_RSP_PDU_FLAG_OVERFLOW 0x04
#define SCSI_RSP_PDU_FLAG_UNDERFLOW 0x02
//
// iSCSI service response codes.
//
#define ISCSI_SERVICE_RSP_COMMAND_COMPLETE_AT_TARGET 0x00
#define ISCSI_SERVICE_RSP_TARGET_FAILURE 0x01
#define ISCSI_TMF_RSP_PDU_RSP_FUNCTION_COMPLETE 0
#define ISCSI_TMF_RSP_PDU_RSP_TASK_NOT_EXIST 1
#define ISCSI_TMF_RSP_PDU_RSP_LUN_NOT_EXIST 2
#define ISCSI_TMF_RSP_PDU_RSP_NOT_SUPPORTED 5
#define ISCSI_TMF_RSP_PDU_RSP_FUNCTION_REJECTED 255
#define SCSI_DATA_IN_PDU_FLAG_ACKKNOWLEDGE 0x40
#define SCSI_DATA_IN_PDU_FLAG_STATUS_VALID 0x01
#define ISCSI_LOGIN_REQ_PDU_FLAG_TRANSIT 0x80
#define ISCSI_LOGIN_REQ_PDU_FLAG_CONTINUE 0x40
#define ISCSI_LOGIN_STATUS_SUCCESS 0
#define ISCSI_LOGIN_STATUS_REDIRECTION 1
#define ISCSI_LOGIN_STATUS_INITIATOR_ERROR 2
#define ISCSI_LOGIN_STATUS_TARGET_ERROR 3
#define ISCSI_LOGOUT_REASON_CLOSE_SESSION 0
#define ISCSI_LOGOUT_REASON_CLOSE_CONNECTION 1
#define ISCSI_LOGOUT_RESPONSE_CID_NOT_FOUND 1
#define ISCSI_LOGOUT_RESPONSE_CLEANUP_FAILED 3
#define ISCSI_SNACK_REQUEST_TYPE_DATA_OR_R2T 0
#define ISCSI_SNACK_REQUEST_TYPE_STATUS 1
#define ISCSI_SNACK_REQUEST_TYPE_DATA_ACK 2
#define ISCSI_SNACK_REQUEST_TYPE_RDATA 3
#define ISCSI_SECURITY_NEGOTIATION 0
#define ISCSI_LOGIN_OPERATIONAL_NEGOTIATION 1
#define ISCSI_FULL_FEATURE_PHASE 3
typedef struct _ISCSI_SESSION ISCSI_SESSION;
typedef struct _ISCSI_CONNECTION ISCSI_CONNECTION;
typedef enum {
DataIn = 0,
DataOut = 1,
DataBi = 2
///
/// iSCSI Basic Header Segment
///
typedef struct _ISCSI_BASIC_HEADER {
typedef struct _ISCSI_ADDTIONAL_HEADER {
typedef struct _ISCSI_BI_EXP_READ_DATA_LEN_AHS {
///
/// SCSI Command
///
typedef struct _SCSI_COMMAND {
} SCSI_COMMAND;
///
/// SCSI Response
///
typedef struct _SCSI_RESPONSE {
typedef struct _ISCSI_SENSE_DATA {
///
/// iSCSI Task Managment Function Request.
///
typedef struct _ISCSI_TMF_REQUEST {
///
/// iSCSI Task Management Function Response.
///
typedef struct _ISCSI_TMF_RESPONSE {
///
/// SCSI Data-Out
///
typedef struct _ISCSI_SCSI_DATA_OUT {
///
/// SCSI Data-In
///
typedef struct _ISCSI_SCSI_DATA_IN {
///
/// Ready To Transfer.
///
typedef struct _ISCSI_READY_TO_TRANSFER {
typedef struct _ISCSI_ASYNC_MESSAGE {
///
/// Login Request.
///
typedef struct _ISCSI_LOGIN_REQUEST {
///
/// Login Response.
///
typedef struct _ISCSI_LOGIN_RESPONSE {
///
/// Logout Request.
///
typedef struct _ISCSI_LOGOUT_REQUEST {
///
/// Logout Response.
///
typedef struct _ISCSI_LOGOUT_RESPONSE {
///
/// SNACK Request.
///
typedef struct _ISCSI_SNACK_REQUEST {
///
/// Reject.
///
typedef struct _ISCSI_REJECT {
} ISCSI_REJECT;
///
/// NOP-Out.
///
typedef struct _ISCSI_NOP_OUT {
///
/// NOP-In.
///
typedef struct _ISCSI_NOP_IN {
} ISCSI_NOP_IN;
typedef enum {
typedef struct _ISCSI_XFER_CONTEXT {
typedef struct _ISCSI_IN_BUFFER_CONTEXT {
typedef struct _ISCSI_TCB {
} ISCSI_TCB;
typedef struct _ISCSI_KEY_VALUE_PAIR {
/**
Attach the iSCSI connection to the iSCSI session.
@param[in, out] Session The iSCSI session.
@param[in, out] Conn The iSCSI connection.
**/
);
/**
Detach the iSCSI connection from the session it belongs to.
@param[in, out] Conn The iSCSI connection.
**/
);
/**
This function performs the iSCSI connection login.
@param[in, out] Conn The iSCSI connection to login.
@param Timeout The timeout value in milliseconds.
@retval EFI_SUCCESS The iSCSI connection is logged into the iSCSI target.
@retval EFI_TIMEOUT Timeout occurred during the login procedure.
@retval Others Other errors as indicated.
**/
);
/**
Create a TCP connection for the iSCSI session.
@param[in] Session Points to the iSCSI session.
@return The newly created iSCSI connection.
**/
);
/**
Destroy an iSCSI connection.
@param[in] Conn The connection to destroy.
**/
);
/**
Login the iSCSI session.
@param[in] Session The iSCSI session
@retval EFI_SUCCESS The iSCSI session login procedure finished.
@retval EFI_OUT_OF_RESOURCES Failed to allocate memory.
@retval EFI_NO_MEDIA There was a media error.
@retval Others Other errors as indicated.
**/
);
/**
Wait for IPsec negotiation, then try to login the iSCSI session again.
@param[in] Session The iSCSI session
@retval EFI_SUCCESS The iSCSI session login procedure finished.
@retval EFI_OUT_OF_RESOURCES Failed to allocate memory.
@retval EFI_PROTOCOL_ERROR Some kind of iSCSI protocol error happened.
**/
);
/**
Build and send the iSCSI login request to the iSCSI target according to
the current login stage.
@param[in] Conn The connection in the iSCSI login phase.
@retval EFI_SUCCESS The iSCSI login request PDU is built and sent on this
connection.
@retval EFI_OUT_OF_RESOURCES Failed to allocate memory.
@retval EFI_DEVICE_ERROR Some kind of device error happened.
**/
);
/**
Receive and process the iSCSI login response.
@param[in] Conn The connection in the iSCSI login phase.
@retval EFI_SUCCESS The iSCSI login response PDU is received and processed.
@retval Others Other errors as indicated.
**/
);
/**
Add an iSCSI key-value pair as a string into the data segment of the Login Request PDU.
The DataSegmentLength and the actual size of the net buffer containing this PDU will be
updated.
@param[in, out] Pdu The iSCSI PDU whose data segment the key-value pair will
be added to.
@param[in] Key The key name string.
@param[in] Value The value string.
@retval EFI_SUCCESS The key-valu pair is added to the PDU's datasegment and
the correspondence length fields are updated.
@retval EFI_OUT_OF_RESOURCES There is not enough space in the PDU to add the key-value
pair.
**/
);
/**
Prepare the iSCSI login request to be sent according to the current login status.
@param[in, out] Conn The connection in the iSCSI login phase.
@return The pointer to the net buffer containing the iSCSI login request built.
@retval NULL Other errors as indicated.
**/
NET_BUF *
);
/**
Process the iSCSI Login Response.
@param[in, out] Conn The connection on which the iSCSI login response is received.
@param[in, out] Pdu The iSCSI login response PDU.
@retval EFI_SUCCESS The iSCSI login response PDU is processed and all check are passed.
@retval EFI_PROTOCOL_ERROR Some kind of iSCSI protocol error happened.
@retval EFI_MEDIA_CHANGED Target is redirected.
@retval Others Other errors as indicated.
**/
);
/**
Updated the target information according the data received in the iSCSI
login response with an target redirection status.
@param[in, out] Session The iSCSI session.
@param[in] Data The data segment which should contain the
TargetAddress key-value list.
@param[in] Len Length of the data.
@retval EFI_SUCCESS The target address is updated.
@retval EFI_OUT_OF_RESOURCES Failed to allocate memory.
@retval EFI_NOT_FOUND The TargetAddress key is not found.
@retval Others Other errors as indicated.
**/
);
/**
The callback function to free the net buffer list.
@param[in] Arg The opaque parameter.
**/
);
/**
Receive an iSCSI response PDU. An iSCSI response PDU contains an iSCSI PDU header and
an optional data segment. The two parts will be put into two blocks of buffers in the
net buffer. The digest check will be conducted in this function if needed and the digests
will be trimmed from the PDU buffer.
@param[in] Conn The iSCSI connection to receive data from.
@param[out] Pdu The received iSCSI pdu.
@param[in] Context The context used to describe information on the caller provided
buffer to receive data segment of the iSCSI pdu, it's optional.
@param[in] HeaderDigest Whether there will be header digest received.
@param[in] DataDigest Whether there will be data digest.
@param[in] TimeoutEvent The timeout event, it's optional.
@retval EFI_SUCCESS An iSCSI pdu is received.
@retval EFI_OUT_OF_RESOURCES Failed to allocate memory.
@retval EFI_PROTOCOL_ERROR Some kind of iSCSI protocol error occurred.
@retval Others Other errors as indicated.
**/
);
/**
Check and get the result of the parameter negotiation.
@param[in, out] Conn The connection in iSCSI login.
@retval EFI_SUCCESS The parmeter check is passed and negotiation is finished.
@retval EFI_PROTOCOL_ERROR Some kind of iSCSI protocol error occurred.
@retval EFI_OUT_OF_RESOURCES Failed to allocate memory.
**/
);
/**
Fill the operational parameters.
@param[in] Conn The connection in iSCSI login.
@param[in, out] Pdu The iSCSI login request PDU to fill the parameters.
**/
);
/**
Pad the iSCSI AHS or data segment to an integer number of 4 byte words.
@param[in, out] Pdu The iSCSI pdu which contains segments to pad.
@param[in] Len The length of the last semgnet in the PDU.
@retval EFI_SUCCESS The segment is padded or no need to pad it.
@retval EFI_OUT_OF_RESOURCES There is not enough remaining free space to add the
padding bytes.
**/
);
/**
Build a key-value list from the data segment.
@param[in] Data The data segment containing the key-value pairs.
@param[in] Len Length of the data segment.
@return The key-value list.
@retval NULL Other errors as indicated.
**/
);
/**
Get the value string by the key name from the key-value list. If found,
the key-value entry will be removed from the list.
@param[in, out] KeyValueList The key-value list.
@param[in] Key The key name to find.
@return The value string.
@retval NULL The key value pair can not be found.
**/
CHAR8 *
);
/**
Free the key-value list.
@param[in] KeyValueList The key-value list.
**/
);
/**
Normalize the iSCSI name according to RFC.
@param[in, out] Name The iSCSI name.
@param[in] Len length of the iSCSI name.
@retval EFI_SUCCESS The iSCSI name is valid and normalized.
@retval EFI_PROTOCOL_ERROR The iSCSI name is mal-formatted or not in the IQN format.
**/
);
/**
Execute the SCSI command issued through the EXT SCSI PASS THRU protocol.
@param[in] PassThru The EXT SCSI PASS THRU protocol.
@param[in] Target The target ID.
@param[in] Lun The LUN.
@param[in, out] Packet The request packet containing IO request, SCSI command
@retval EFI_SUCCES The SCSI command is executed and the result is updated to
the Packet.
@retval EFI_DEVICE_ERROR Session state was not as required.
@retval EFI_OUT_OF_RESOURCES Failed to allocate memory.
@retval Others Other errors as indicated.
**/
);
/**
Reinstate the session on some error.
@param[in] Session The iSCSI session
@retval EFI_SUCCES The session is reinstated from some error.
@retval Other Reinstatement failed.
**/
);
/**
Initialize some session parameters before login.
@param[in, out] Session The iSCSI session.
@param[in] Recovery Whether the request is from a fresh new start or recovery.
**/
);
/**
Abort the iSCSI session, that is, reset all the connection and free the
resources.
@param[in, out] Session The iSCSI session.
**/
);
#endif