ReportStatusCodeRouterRuntimeDxe.c revision 4fd606d1f5abe38e1f42c38de1d2e895166bd0f4
/** @file
Report Status Code Router Driver which produces Report Stataus Code Handler Protocol
and Status Code Runtime Protocol.
Copyright (c) 2009 - 2011, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include "ReportStatusCodeRouterRuntimeDxe.h"
//
// Report operation nest status.
// If it is set, then the report operation has nested.
//
};
};
/**
Event callback function to invoke status code handler in list.
@param Event Event whose notification function is being invoked.
@param Context Pointer to the notification function's context, which is
always zero in current implementation.
**/
)
{
//
// Traverse the status code data buffer to parse all
// data to report.
//
);
}
}
/**
Register the callback function for ReportStatusCode() notification.
When this function is called the function pointer is added to an internal list and any future calls to
ReportStatusCode() will be forwarded to the Callback function. During the bootservices,
this is the callback for which this service can be invoked. The report status code router
will create an event such that the callback function is only invoked at the TPL for which it was
registered. The entity that registers for the callback should also register for an event upon
generation of exit boot services and invoke the unregister service.
If the handler does not have a TPL dependency, it should register for a callback at TPL high. The
router infrastructure will support making callbacks at runtime, but the caller for runtime invocation
must meet the following criteria:
1. must be a runtime driver type so that its memory is not reclaimed
2. not unregister at exit boot services so that the router will still have its callback address
3. the caller must be self-contained (eg. Not call out into any boot-service interfaces) and be
runtime safe, in general.
@param[in] Callback A pointer to a function of type EFI_RSC_HANDLER_CALLBACK that is called when
a call to ReportStatusCode() occurs.
@param[in] Tpl TPL at which callback can be safely invoked.
@retval EFI_SUCCESS Function was successfully registered.
@retval EFI_INVALID_PARAMETER The callback function was NULL.
@retval EFI_OUT_OF_RESOURCES The internal buffer ran out of space. No more functions can be
registered.
@retval EFI_ALREADY_STARTED The function was already registered. It can't be registered again.
**/
Register (
)
{
return EFI_INVALID_PARAMETER;
}
for (Link = GetFirstNode (&mCallbackListHead); !IsNull (&mCallbackListHead, Link); Link = GetNextNode (&mCallbackListHead, Link)) {
//
// If the function was already registered. It can't be registered again.
//
return EFI_ALREADY_STARTED;
}
}
//
// If TPL of registered callback funtion is not TPL_HIGH_LEVEL, then event should be created
// for it, and related buffer for status code data should be prepared.
// Here the data buffer must be prepared in advance, because Report Status Code Protocol might
// be invoked under TPL_HIGH_LEVEL and no memory allocation is allowed then.
// If TPL is TPL_HIGH_LEVEL, then all status code will be reported immediately, without data
// buffer and event trigger.
//
if (Tpl != TPL_HIGH_LEVEL) {
Tpl,
);
}
return EFI_SUCCESS;
}
/**
Remove a previously registered callback function from the notification list.
A callback function must be unregistered before it is deallocated. It is important that any registered
callbacks that are not runtime complaint be unregistered when ExitBootServices() is called.
@param[in] Callback A pointer to a function of type EFI_RSC_HANDLER_CALLBACK that is to be
unregistered.
@retval EFI_SUCCESS The function was successfully unregistered.
@retval EFI_INVALID_PARAMETER The callback function was NULL.
@retval EFI_NOT_FOUND The callback function was not found to be unregistered.
**/
)
{
return EFI_INVALID_PARAMETER;
}
for (Link = GetFirstNode (&mCallbackListHead); !IsNull (&mCallbackListHead, Link); Link = GetNextNode (&mCallbackListHead, Link)) {
//
// If the function is found in list, delete it and return.
//
}
return EFI_SUCCESS;
}
}
return EFI_NOT_FOUND;
}
/**
Provides an interface that a software module can call to report a status code.
@param Type Indicates the type of status code being reported.
@param Value Describes the current status of a hardware or software entity.
This included information about the class and subclass that is used to
classify the entity as well as an operation.
@param Instance The enumeration of a hardware or software entity within
the system. Valid instance numbers start with 1.
@param CallerId This optional parameter may be used to identify the caller.
This parameter allows the status code driver to apply different rules to
different callers.
@param Data This optional parameter may be used to pass additional data.
@retval EFI_SUCCESS The function completed successfully
@retval EFI_DEVICE_ERROR The function should not be completed due to a device error.
**/
)
{
//
// Use atom operation to avoid the reentant of report.
// If current status is not zero, then the function is reentrancy.
//
return EFI_DEVICE_ERROR;
}
//
// The handler may remove itself, so get the next handler in advance.
//
Type,
);
continue;
}
//
// If callback is registered with TPL lower than TPL_HIGH_LEVEL, event must be signaled at boot time to possibly wait for
// allowed TPL to report status code. Related data should also be stored in data buffer.
//
}
//
// If data buffer is about to be used up (7/8 here), try to reallocate a buffer with double size, if not at TPL_HIGH_LEVEL.
//
if (CallbackEntry->EndPointer > (CallbackEntry->StatusCodeDataBuffer + (CallbackEntry->BufferSize / 8) * 7)) {
if (EfiGetCurrentTpl () < TPL_HIGH_LEVEL) {
);
CallbackEntry->EndPointer = (EFI_PHYSICAL_ADDRESS) (UINTN) NewBuffer + (CallbackEntry->EndPointer - CallbackEntry->StatusCodeDataBuffer);
}
}
}
//
// If data buffer is used up, do not report for this time.
//
if (CallbackEntry->EndPointer > (CallbackEntry->StatusCodeDataBuffer + CallbackEntry->BufferSize)) {
continue;
}
}
}
}
//
// Restore the nest status of report
//
return EFI_SUCCESS;
}
/**
Virtual address change notification call back. It converts global pointer
to virtual address.
@param Event Event whose notification function is being invoked.
@param Context Pointer to the notification function's context, which is
always zero in current implementation.
**/
)
{
for (Link = GetFirstNode (&mCallbackListHead); !IsNull (&mCallbackListHead, Link); Link = GetNextNode (&mCallbackListHead, Link)) {
}
Status = EfiConvertList (
0,
);
}
/**
Entry point of Generic Status Code Driver.
This function is the entry point of this Generic Status Code Driver.
It installs eport Stataus Code Handler Protocol and Status Code Runtime Protocol,
and registers event for EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE.
@param ImageHandle The firmware allocated handle for the EFI image.
@param SystemTable A pointer to the EFI System Table.
@retval EFI_SUCCESS The entry point is executed successfully.
**/
)
{
&mHandle,
);
NULL,
);
return EFI_SUCCESS;
}