Get_status.c revision 4fd606d1f5abe38e1f42c38de1d2e895166bd0f4
/** @file
Implementation of reading the current interrupt status and recycled transmit
buffer status from a network interface.
Copyright (c) 2004 - 2010, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials are licensed
and made available under the terms and conditions of the BSD License which
accompanies this distribution. The full text of the license may be found at
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include "Snp.h"
/**
Call undi to get the status of the interrupts, get the list of transmit
buffers that completed transmitting.
@param Snp Pointer to snp driver structure.
@param InterruptStatusPtr A non null pointer to contain the interrupt
status.
@param TransmitBufferListPtrs A non null pointer to contain the list of
pointers of previous transmitted buffers whose
transmission was completed asynchrnously.
@retval EFI_SUCCESS The status of the network interface was retrieved.
@retval EFI_DEVICE_ERROR The command could not be sent to the network
interface.
**/
)
{
if (TransmitBufferListPtr != NULL) {
}
if (InterruptStatusPtr != NULL) {
}
if (Snp->MediaStatusSupported) {
}
//
// size DB for return of one buffer
//
Snp->Cdb.DBsize = (UINT16) ((sizeof (PXE_DB_GET_STATUS) - sizeof (Db->TxBuffer)) + sizeof (Db->TxBuffer[0]));
//
// Issue UNDI command and check result.
//
DEBUG (
"\nSnp->undi.get_status() %xh:%xh\n",
);
return EFI_DEVICE_ERROR;
}
//
// report the values back..
//
if (InterruptStatusPtr != NULL) {
*InterruptStatusPtr = 0;
}
}
}
}
}
if (TransmitBufferListPtr != NULL) {
(
}
//
// Update MediaPresent field of EFI_SIMPLE_NETWORK_MODE if the UNDI support
// returning media status from GET_STATUS command
//
if (Snp->MediaStatusSupported) {
}
return EFI_SUCCESS;
}
/**
Reads the current interrupt status and recycled transmit buffer status from a
network interface.
This function gets the current interrupt and recycled transmit buffer status
from the network interface. The interrupt status is returned as a bit mask in
InterruptStatus. If InterruptStatus is NULL, the interrupt status will not be
read. If TxBuf is not NULL, a recycled transmit buffer address will be retrieved.
If a recycled transmit buffer address is returned in TxBuf, then the buffer has
been successfully transmitted, and the status for that buffer is cleared. If
the status of the network interface is successfully collected, EFI_SUCCESS
will be returned. If the driver has not been initialized, EFI_DEVICE_ERROR will
be returned.
@param This A pointer to the EFI_SIMPLE_NETWORK_PROTOCOL instance.
@param InterruptStatus A pointer to the bit mask of the currently active
interrupts (see "Related Definitions"). If this is NULL,
the interrupt status will not be read from the device.
If this is not NULL, the interrupt status will be read
from the device. When the interrupt status is read, it
will also be cleared. Clearing the transmit interrupt does
not empty the recycled transmit buffer array.
@param TxBuf Recycled transmit buffer address. The network interface
will not transmit if its internal recycled transmit
buffer array is full. Reading the transmit buffer does
not clear the transmit interrupt. If this is NULL, then
the transmit buffer status will not be read. If there
are no transmit buffers to recycle and TxBuf is not NULL,
TxBuf will be set to NULL.
@retval EFI_SUCCESS The status of the network interface was retrieved.
@retval EFI_NOT_STARTED The network interface has not been started.
@retval EFI_INVALID_PARAMETER This parameter was NULL or did not point to a valid
EFI_SIMPLE_NETWORK_PROTOCOL structure.
@retval EFI_DEVICE_ERROR The command could not be sent to the network
interface.
**/
)
{
return EFI_INVALID_PARAMETER;
}
return EFI_INVALID_PARAMETER;
}
return EFI_DEVICE_ERROR;
}
break;
case EfiSimpleNetworkStopped:
goto ON_EXIT;
default:
goto ON_EXIT;
}
return Status;
}