Usb/UsbMassStorageDxe/UsbMass.h

	UsbMass.h revision 4fd606d1f5abe38e1f42c38de1d2e895166bd0f4
/** @file
  Definition of USB Mass Storage Class and its value, USB Mass Transport Protocol,
  and other common definitions.

Copyright (c) 2007 - 2012, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

**/

#ifndef _EFI_USBMASS_H_
#define _EFI_USBMASS_H_


#include <Uefi.h>
#include <IndustryStandard/Scsi.h>
#include <Protocol/BlockIo.h>
#include <Protocol/UsbIo.h>
#include <Protocol/DevicePath.h>
#include <Protocol/DiskInfo.h>
#include <Library/BaseLib.h>
#include <Library/DebugLib.h>
#include <Library/BaseMemoryLib.h>
#include <Library/UefiDriverEntryPoint.h>
#include <Library/UefiBootServicesTableLib.h>
#include <Library/UefiLib.h>
#include <Library/MemoryAllocationLib.h>
#include <Library/DevicePathLib.h>

typedef struct _USB_MASS_TRANSPORT USB_MASS_TRANSPORT;
typedef struct _USB_MASS_DEVICE    USB_MASS_DEVICE;

#include "UsbMassBot.h"
#include "UsbMassCbi.h"
#include "UsbMassBoot.h"
#include "UsbMassDiskInfo.h"
#include "UsbMassImpl.h"

#define USB_IS_IN_ENDPOINT(EndPointAddr)      (((EndPointAddr) & BIT7) == BIT7)
#define USB_IS_OUT_ENDPOINT(EndPointAddr)     (((EndPointAddr) & BIT7) == 0)
#define USB_IS_BULK_ENDPOINT(Attribute)       (((Attribute) & (BIT0 | BIT1)) == USB_ENDPOINT_BULK)
#define USB_IS_INTERRUPT_ENDPOINT(Attribute)  (((Attribute) & (BIT0 | BIT1)) == USB_ENDPOINT_INTERRUPT)
#define USB_IS_ERROR(Result, Error)           (((Result) & (Error)) != 0)

//
// Usb mass storage class code
//
#define USB_MASS_STORE_CLASS    0x08

//
// Usb mass storage subclass code, specify the command set used.
//
#define USB_MASS_STORE_RBC      0x01 ///< Reduced Block Commands
#define USB_MASS_STORE_8020I    0x02 ///< SFF-8020i, typically a CD/DVD device
#define USB_MASS_STORE_QIC      0x03 ///< Typically a tape device
#define USB_MASS_STORE_UFI      0x04 ///< Typically a floppy disk driver device
#define USB_MASS_STORE_8070I    0x05 ///< SFF-8070i, typically a floppy disk driver device.
#define USB_MASS_STORE_SCSI     0x06 ///< SCSI transparent command set

//
// Usb mass storage protocol code, specify the transport protocol
//
#define USB_MASS_STORE_CBI0     0x00 ///< CBI protocol with command completion interrupt
#define USB_MASS_STORE_CBI1     0x01 ///< CBI protocol without command completion interrupt
#define USB_MASS_STORE_BOT      0x50 ///< Bulk-Only Transport

#define USB_MASS_1_MILLISECOND  1000
#define USB_MASS_1_SECOND       (1000 * USB_MASS_1_MILLISECOND)

#define USB_MASS_CMD_SUCCESS    0
#define USB_MASS_CMD_FAIL       1
#define USB_MASS_CMD_PERSISTENT 2

/**
  Initializes USB transport protocol.

  This function initializes the USB mass storage class transport protocol.
  It will save its context in the Context if Context isn't NULL.

  @param  UsbIo                 The USB I/O Protocol instance
  @param  Context               The buffer to save the context to

  @retval EFI_SUCCESS           The device is successfully initialized.
  @retval EFI_UNSUPPORTED       The transport protocol doesn't support the device.
  @retval Other                 The USB transport initialization fails.

**/
typedef
EFI_STATUS
(*USB_MASS_INIT_TRANSPORT) (
  IN  EFI_USB_IO_PROTOCOL     *Usb,
  OUT VOID                    **Context    OPTIONAL
  );

/**
  Execute USB mass storage command through the transport protocol.

  @param  Context               The USB Transport Protocol.
  @param  Cmd                   The command to transfer to device
  @param  CmdLen                The length of the command
  @param  DataDir               The direction of data transfer
  @param  Data                  The buffer to hold the data
  @param  DataLen               The length of the buffer
  @param  Lun                   Should be 0, this field for bot only
  @param  Timeout               The time to wait
  @param  CmdStatus             The result of the command execution

  @retval EFI_SUCCESS           The command is executed successfully.
  @retval Other                 Failed to execute the command

**/
typedef
EFI_STATUS
(*USB_MASS_EXEC_COMMAND) (
  IN  VOID                    *Context,
  IN  VOID                    *Cmd,
  IN  UINT8                   CmdLen,
  IN  EFI_USB_DATA_DIRECTION  DataDir,
  IN  VOID                    *Data,
  IN  UINT32                  DataLen,
  IN  UINT8                   Lun,
  IN  UINT32                  Timeout,
  OUT UINT32                  *CmdStatus
  );

/**
  Reset the USB mass storage device by Transport protocol.

  @param  Context               The USB Transport Protocol
  @param  ExtendedVerification  The flag controlling the rule of reset.
                                Not used here.

  @retval EFI_SUCCESS           The device is reset.
  @retval Others                Failed to reset the device.

**/
typedef
EFI_STATUS
(*USB_MASS_RESET) (
  IN  VOID                    *Context,
  IN  BOOLEAN                 ExtendedVerification
  );

/**
  Get the max LUN (Logical Unit Number) of USB mass storage device.

  @param  Context          The context of the transport protocol.
  @param  MaxLun           Return pointer to the max number of LUN. (e.g. MaxLun=1 means LUN0 and
                           LUN1 in all.)

  @retval EFI_SUCCESS      Max LUN is got successfully.
  @retval Others           Fail to execute this request.

**/
typedef
EFI_STATUS
(*USB_MASS_GET_MAX_LUN) (
  IN  VOID                    *Context,
  IN  UINT8                   *MaxLun
  );

/**
  Clean up the transport protocol's resource.

  @param  Context               The instance of transport protocol.

  @retval EFI_SUCCESS           The resource is cleaned up.

**/
typedef
EFI_STATUS
(*USB_MASS_CLEAN_UP) (
  IN  VOID                    *Context
  );

///
/// This structure contains information necessary to select the
/// proper transport protocol. The mass storage class defines
/// two transport protocols. One is the CBI, and the other is BOT.
/// CBI is being obseleted. The design is made modular by this
/// structure so that the CBI protocol can be easily removed when
/// it is no longer necessary.
///
struct _USB_MASS_TRANSPORT {
  UINT8                   Protocol;
  USB_MASS_INIT_TRANSPORT Init;        ///< Initialize the mass storage transport protocol
  USB_MASS_EXEC_COMMAND   ExecCommand; ///< Transport command to the device then get result
  USB_MASS_RESET          Reset;       ///< Reset the device
  USB_MASS_GET_MAX_LUN    GetMaxLun;   ///< Get max lun, only for bot
  USB_MASS_CLEAN_UP       CleanUp;     ///< Clean up the resources.
};

struct _USB_MASS_DEVICE {
  UINT32                    Signature;
  EFI_HANDLE                Controller;
  EFI_USB_IO_PROTOCOL       *UsbIo;
  EFI_DEVICE_PATH_PROTOCOL  *DevicePath;
  EFI_BLOCK_IO_PROTOCOL     BlockIo;
  EFI_BLOCK_IO_MEDIA        BlockIoMedia;
  BOOLEAN                   OpticalStorage;
  UINT8                     Lun;          ///< Logical Unit Number
  UINT8                     Pdt;          ///< Peripheral Device Type
  USB_MASS_TRANSPORT        *Transport;   ///< USB mass storage transport protocol
  VOID                      *Context;
  EFI_DISK_INFO_PROTOCOL    DiskInfo;
  USB_BOOT_INQUIRY_DATA     InquiryData;
  BOOLEAN                   Cdb16Byte;
};

#endif