AtapiPeim.h revision 4fd606d1f5abe38e1f42c38de1d2e895166bd0f4
/** @file
Private Include file for IdeBus PEIM.
Copyright (c) 2006 - 2010, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions
of the BSD License which accompanies this distribution. The
full text of the license may be found at
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#ifndef _RECOVERY_ATAPI_H_
#define _RECOVERY_ATAPI_H_
#include <PiPei.h>
#include <Ppi/AtaController.h>
#include <Library/DebugLib.h>
#include <Library/TimerLib.h>
#include <Library/PeimEntryPoint.h>
#include <Library/PeiServicesLib.h>
#include <Library/BaseMemoryLib.h>
#include <Library/PeiServicesTablePointerLib.h>
#include <Library/MemoryAllocationLib.h>
#include <IndustryStandard/Atapi.h>
#define MAX_SENSE_KEY_COUNT 6
typedef enum {
IdePrimary = 0,
IdeSecondary = 1,
IdeMaxChannel = 2
typedef enum {
IdeMaster = 0,
IdeSlave = 1,
IdeMaxDevice = 2
//
// IDE Registers
//
typedef union {
typedef union {
typedef union {
//
// IDE registers set
//
typedef struct {
typedef struct {
typedef struct {
#define PEI_RECOVERY_ATAPI_FROM_BLKIO_THIS(a) CR (a, ATAPI_BLK_IO_DEV, AtapiBlkIo, ATAPI_BLK_IO_DEV_SIGNATURE)
//
// Time Out Value For IDE Device Polling
//
// ATATIMEOUT is used for waiting time out for ATA device
//
// ATAPITIMEOUT is used for waiting operation
// except read and write time out for ATAPI device
//
// ATAPILONGTIMEOUT is used for waiting read and
// write operation timeout for ATAPI device
//
//
// PEI Recovery Block I/O PPI
//
/**
Gets the count of block I/O devices that one specific block driver detects.
This function is used for getting the count of block I/O devices that one
specific block driver detects. To the PEI ATAPI driver, it returns the number
of all the detected ATAPI devices it detects during the enumeration process.
To the PEI legacy floppy driver, it returns the number of all the legacy
devices it finds during its enumeration process. If no device is detected,
then the function will return zero.
@param[in] PeiServices General-purpose services that are available
to every PEIM.
@param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO_PPI
instance.
@param[out] NumberBlockDevices The number of block I/O devices discovered.
@retval EFI_SUCCESS Operation performed successfully.
**/
);
/**
Gets a block device's media information.
This function will provide the caller with the specified block device's media
information. If the media changes, calling this function will update the media
information accordingly.
@param[in] PeiServices General-purpose services that are available to every
PEIM
@param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO_PPI instance.
@param[in] DeviceIndex Specifies the block device to which the function wants
to talk. Because the driver that implements Block I/O
PPIs will manage multiple block devices, the PPIs that
want to talk to a single device must specify the
device index that was assigned during the enumeration
process. This index is a number from one to
NumberBlockDevices.
@param[out] MediaInfo The media information of the specified block media.
The caller is responsible for the ownership of this
data structure.
@retval EFI_SUCCESS Media information about the specified block device
was obtained successfully.
@retval EFI_DEVICE_ERROR Cannot get the media information due to a hardware
error.
@retval Others Other failure occurs.
**/
);
/**
Reads the requested number of blocks from the specified block device.
The function reads the requested number of blocks from the device. All the
blocks are read, or an error is returned. If there is no media in the device,
the function returns EFI_NO_MEDIA.
@param[in] PeiServices General-purpose services that are available to
every PEIM.
@param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO_PPI instance.
@param[in] DeviceIndex Specifies the block device to which the function wants
to talk. Because the driver that implements Block I/O
PPIs will manage multiple block devices, the PPIs that
want to talk to a single device must specify the device
index that was assigned during the enumeration process.
This index is a number from one to NumberBlockDevices.
@param[in] StartLBA The starting logical block address (LBA) to read from
on the device
@param[in] BufferSize The size of the Buffer in bytes. This number must be
a multiple of the intrinsic block size of the device.
@param[out] Buffer A pointer to the destination buffer for the data.
The caller is responsible for the ownership of the
buffer.
@retval EFI_SUCCESS The data was read correctly from the device.
@retval EFI_DEVICE_ERROR The device reported an error while attempting
to perform the read operation.
@retval EFI_INVALID_PARAMETER The read request contains LBAs that are not
valid, or the buffer is not properly aligned.
@retval EFI_NO_MEDIA There is no media in the device.
@retval EFI_BAD_BUFFER_SIZE The BufferSize parameter is not a multiple of
the intrinsic block size of the device.
**/
);
//
// Internal functions
//
/**
Enumerate Atapi devices.
This function is used to enumerate Atatpi device in Ide channel.
@param[in] AtapiBlkIoDev A pointer to atapi block IO device
**/
);
/**
Detect Atapi devices.
@param[in] AtapiBlkIoDev A pointer to atapi block IO device.
@param[in] DevicePosition An integer to signify device position.
@param[out] MediaInfo The media information of the specified block media.
@retval TRUE Atapi device exists in specified position.
@retval FALSE Atapi device does not exist in specified position.
**/
);
/**
Detect if an IDE controller exists in specified position.
@param[in] AtapiBlkIoDev A pointer to atapi block IO device.
@param[in] DevicePosition An integer to signify device position.
@retval TRUE The Atapi device exists.
@retval FALSE The Atapi device does not present.
**/
);
/**
Wait specified time interval to poll for BSY bit clear in the Status Register.
@param[in] AtapiBlkIoDev A pointer to atapi block IO device.
@param[in] IdeIoRegisters A pointer to IDE IO registers.
@param[in] TimeoutInMilliSeconds Time specified in milliseconds.
@retval EFI_SUCCESS BSY bit is cleared in the specified time interval.
@retval EFI_TIMEOUT BSY bit is not cleared in the specified time interval.
**/
);
/**
Wait specified time interval to poll for DRDY bit set in the Status register.
@param[in] AtapiBlkIoDev A pointer to atapi block IO device.
@param[in] IdeIoRegisters A pointer to IDE IO registers.
@param[in] TimeoutInMilliSeconds Time specified in milliseconds.
@retval EFI_SUCCESS DRDY bit is set in the specified time interval.
@retval EFI_TIMEOUT DRDY bit is not set in the specified time interval.
**/
);
/**
Wait specified time interval to poll for DRQ bit clear in the Status Register.
@param[in] AtapiBlkIoDev A pointer to atapi block IO device.
@param[in] IdeIoRegisters A pointer to IDE IO registers.
@param[in] TimeoutInMilliSeconds Time specified in milliseconds.
@retval EFI_SUCCESS DRQ bit is cleared in the specified time interval.
@retval EFI_TIMEOUT DRQ bit is not cleared in the specified time interval.
**/
DRQClear (
);
/**
Wait specified time interval to poll for DRQ bit clear in the Alternate Status Register.
@param[in] AtapiBlkIoDev A pointer to atapi block IO device.
@param[in] IdeIoRegisters A pointer to IDE IO registers.
@param[in] TimeoutInMilliSeconds Time specified in milliseconds.
@retval EFI_SUCCESS DRQ bit is cleared in the specified time interval.
@retval EFI_TIMEOUT DRQ bit is not cleared in the specified time interval.
**/
);
/**
Wait specified time interval to poll for DRQ bit set in the Status Register.
@param[in] AtapiBlkIoDev A pointer to atapi block IO device.
@param[in] IdeIoRegisters A pointer to IDE IO registers.
@param[in] TimeoutInMilliSeconds Time specified in milliseconds.
@retval EFI_SUCCESS DRQ bit is set in the specified time interval.
@retval EFI_TIMEOUT DRQ bit is not set in the specified time interval.
@retval EFI_ABORTED Operation Aborted.
**/
DRQReady (
);
/**
Wait specified time interval to poll for DRQ bit set in the Alternate Status Register.
@param[in] AtapiBlkIoDev A pointer to atapi block IO device.
@param[in] IdeIoRegisters A pointer to IDE IO registers.
@param[in] TimeoutInMilliSeconds Time specified in milliseconds.
@retval EFI_SUCCESS DRQ bit is set in the specified time interval.
@retval EFI_TIMEOUT DRQ bit is not set in the specified time interval.
@retval EFI_ABORTED Operation Aborted.
**/
);
/**
Check if there is an error in Status Register.
@param[in] AtapiBlkIoDev A pointer to atapi block IO device.
@param[in] StatusReg The address to IDE IO registers.
@retval EFI_SUCCESS Operation success.
@retval EFI_DEVICE_ERROR Device error.
**/
);
/**
Idendify Atapi devices.
@param[in] AtapiBlkIoDev A pointer to atapi block IO device.
@param[in] DevicePosition An integer to signify device position.
@retval EFI_SUCCESS Identify successfully.
@retval EFI_DEVICE_ERROR Device cannot be identified successfully.
**/
);
/**
Sends out ATAPI Test Unit Ready Packet Command to the specified device
to find out whether device is accessible.
@param[in] AtapiBlkIoDev A pointer to atapi block IO device.
@param[in] DevicePosition An integer to signify device position.
@retval EFI_SUCCESS TestUnit command executed successfully.
@retval EFI_DEVICE_ERROR Device cannot be executed TestUnit command successfully.
**/
) ;
/**
Send out ATAPI commands conforms to the Packet Command with PIO Data In Protocol.
@param[in] AtapiBlkIoDev A pointer to atapi block IO device.
@param[in] DevicePosition An integer to signify device position.
@param[in] Packet A pointer to ATAPI command packet.
@param[in] Buffer Buffer to contain requested transfer data from device.
@param[in] ByteCount Requested transfer data length.
@param[in] TimeoutInMilliSeconds Time out value, in unit of milliseconds.
@retval EFI_SUCCESS Command executed successfully.
@retval EFI_DEVICE_ERROR Device cannot be executed command successfully.
**/
);
/**
Sends out ATAPI Inquiry Packet Command to the specified device.
This command will return INQUIRY data of the device.
@param[in] AtapiBlkIoDev A pointer to atapi block IO device.
@param[in] DevicePosition An integer to signify device position.
@param[out] MediaInfo The media information of the specified block media.
@retval EFI_SUCCESS Command executed successfully.
@retval EFI_DEVICE_ERROR Device cannot be executed command successfully.
@retval EFI_UNSUPPORTED Unsupported device type.
**/
Inquiry (
);
/**
Since ATAPI device media is removable, it is necessary to detect
whether media is present and get current present media's information.
@param[in] AtapiBlkIoDev A pointer to atapi block IO device.
@param[in] DevicePosition An integer to signify device position.
@param[in, out] MediaInfo The media information of the specified block media.
@retval EFI_SUCCESS Command executed successfully.
@retval EFI_DEVICE_ERROR Some device errors happen.
@retval EFI_OUT_OF_RESOURCES Can not allocate required resources.
**/
);
/**
Reset specified Atapi device.
@param[in] AtapiBlkIoDev A pointer to atapi block IO device.
@param[in] DevicePosition An integer to signify device position.
@param[in] Extensive If TRUE, use ATA soft reset, otherwise use Atapi soft reset.
@retval EFI_SUCCESS Command executed successfully.
@retval EFI_DEVICE_ERROR Some device errors happen.
**/
);
/**
Sends out ATAPI Request Sense Packet Command to the specified device.
@param[in] AtapiBlkIoDev A pointer to atapi block IO device.
@param[in] DevicePosition An integer to signify device position.
@param[in] SenseBuffers Pointer to sense buffer.
@param[in, out] SenseCounts Length of sense buffer.
@retval EFI_SUCCESS Command executed successfully.
@retval EFI_DEVICE_ERROR Some device errors happen.
**/
);
/**
Sends out ATAPI Read Capacity Packet Command to the specified device.
This command will return the information regarding the capacity of the
media in the device.
@param[in] AtapiBlkIoDev A pointer to atapi block IO device.
@param[in] DevicePosition An integer to signify device position.
@param[in, out] MediaInfo The media information of the specified block media.
@retval EFI_SUCCESS Command executed successfully.
@retval EFI_DEVICE_ERROR Some device errors happen.
**/
);
/**
Perform read from disk in block unit.
@param[in] AtapiBlkIoDev A pointer to atapi block IO device.
@param[in] DevicePosition An integer to signify device position.
@param[in] Buffer Buffer to contain read data.
@param[in] StartLba Starting LBA address.
@param[in] NumberOfBlocks Number of blocks to read.
@param[in] BlockSize Size of each block.
@retval EFI_SUCCESS Command executed successfully.
@retval EFI_DEVICE_ERROR Some device errors happen.
**/
);
/**
Check if there is media according to sense data.
@param[in] SenseData Pointer to sense data.
@param[in] SenseCounts Count of sense data.
@retval TRUE No media
@retval FALSE Media exists
**/
);
/**
Check if device state is unclear according to sense data.
@param[in] SenseData Pointer to sense data.
@param[in] SenseCounts Count of sense data.
@retval TRUE Device state is unclear
@retval FALSE Device state is clear
**/
);
/**
Check if there is media error according to sense data.
@param[in] SenseData Pointer to sense data.
@param[in] SenseCounts Count of sense data.
@retval TRUE Media error
@retval FALSE No media error
**/
);
/**
Check if drive is ready according to sense data.
@param[in] SenseData Pointer to sense data.
@param[in] SenseCounts Count of sense data.
@param[out] NeedRetry Indicate if retry is needed.
@retval TRUE Drive ready
@retval FALSE Drive not ready
**/
);
#endif