DevPCI.cpp revision 98e8099cb761b84ed1aa54be8e0ebfb995bc389a
/* $Id$ */
/** @file
* DevPCI - PCI BUS Device.
*/
/*
* Copyright (C) 2006-2007 Sun Microsystems, Inc.
*
* This file is part of VirtualBox Open Source Edition (OSE), as
* available from http://www.virtualbox.org. This file is free software;
* you can redistribute it and/or modify it under the terms of the GNU
* General Public License (GPL) as published by the Free Software
* Foundation, in version 2 as it comes in the "COPYING" file of the
* VirtualBox OSE distribution. VirtualBox OSE is distributed in the
* hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
*
* Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa
* Clara, CA 95054 USA or visit http://www.sun.com if you need
* additional information or have any questions.
* --------------------------------------------------------------------
*
* This code is based on:
*
* QEMU PCI bus manager
*
* Copyright (c) 2004 Fabrice Bellard
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
/*******************************************************************************
* Header Files *
*******************************************************************************/
#define LOG_GROUP LOG_GROUP_DEV_PCI
/* Hack to get PCIDEVICEINT declare at the right point - include "PCIInternal.h". */
#define PCI_INCLUDE_PRIVATE
#include <VBox/pci.h>
#include <VBox/pdmdev.h>
#include <iprt/assert.h>
#include <iprt/string.h>
#include "../Builtins.h"
/*******************************************************************************
* Structures and Typedefs *
*******************************************************************************/
/**
* PIIX3 ISA Bridge state.
*/
typedef struct PIIX3State
{
/** The PCI device of the bridge. */
PCIDEVICE dev;
} PIIX3State, PIIX3, *PPIIX3;
/**
* PCI Bus instance.
*/
typedef struct PCIBus
{
/** Bus number. */
int32_t iBus;
/** Start device number. */
int32_t iDevSearch;
/** Number of bridges attached to the bus. */
uint32_t cBridges;
uint32_t Alignment0;
/** Array of PCI devices. */
R3PTRTYPE(PPCIDEVICE) devices[256];
/** Array of bridges attached to the bus. */
R3PTRTYPE(PPCIDEVICE *) papBridgesR3;
/** R3 pointer to the device instance. */
PPDMDEVINSR3 pDevInsR3;
/** Pointer to the PCI R3 helpers. */
PCPDMPCIHLPR3 pPciHlpR3;
/** R0 pointer to the device instance. */
PPDMDEVINSR0 pDevInsR0;
/** Pointer to the PCI R0 helpers. */
PCPDMPCIHLPR0 pPciHlpR0;
/** RC pointer to the device instance. */
PPDMDEVINSRC pDevInsRC;
/** Pointer to the PCI RC helpers. */
PCPDMPCIHLPRC pPciHlpRC;
/** The PCI device for the PCI bridge. */
PCIDEVICE PciDev;
} PCIBUS;
/** Pointer to a PCIBUS instance. */
typedef PCIBUS *PPCIBUS;
typedef PCIBUS PCIBus;
/** @def PCI_IRQ_PINS
* Number of pins for interrupts (PIRQ#0...PIRQ#3)
*/
#define PCI_IRQ_PINS 4
/** @def PCI_APIC_IRQ_PINS
* Number of pins for interrupts if the APIC is used.
*/
#define PCI_APIC_IRQ_PINS 8
/**
* PCI Globals - This is the host-to-pci bridge and the root bus.
*/
typedef struct PCIGLOBALS
{
/** Irq levels for the four PCI Irqs.
* These count how many devices asserted
* the IRQ line. If greater 0 an IRQ is sent to the guest.
* If it drops to 0 the IRQ is deasserted.
*/
volatile uint32_t pci_irq_levels[PCI_IRQ_PINS];
#if 1 /* Will be moved into the BIOS soon. */
/** The next I/O port address which the PCI BIOS will use. */
uint32_t pci_bios_io_addr;
/** The next MMIO address which the PCI BIOS will use. */
uint32_t pci_bios_mem_addr;
/** Actual bus number. */
uint8_t uBus;
#endif
/** I/O APIC usage flag */
bool fUseIoApic;
/** I/O APIC irq levels */
volatile uint32_t pci_apic_irq_levels[PCI_APIC_IRQ_PINS];
/** ACPI IRQ level */
uint32_t acpi_irq_level;
/** ACPI PIC IRQ */
int acpi_irq;
/** Config register. */
uint32_t uConfigReg;
/** R3 pointer to the device instance. */
PPDMDEVINSR3 pDevInsR3;
/** R0 pointer to the device instance. */
PPDMDEVINSR0 pDevInsR0;
/** RC pointer to the device instance. */
PPDMDEVINSRC pDevInsRC;
#if HC_ARCH_BITS == 64
uint32_t Alignment0;
#endif
/** ISA bridge state. */
PIIX3 PIIX3State;
/** PCI bus which is attached to the host-to-PCI bridge. */
PCIBUS PciBus;
} PCIGLOBALS;
/** Pointer to per VM data. */
typedef PCIGLOBALS *PPCIGLOBALS;
/*******************************************************************************
* Defined Constants And Macros *
*******************************************************************************/
/** Converts a bus instance pointer to a device instance pointer. */
#define PCIBUS_2_DEVINS(pPciBus) ((pPciBus)->CTX_SUFF(pDevIns))
/** Converts a device instance pointer to a PCIGLOBALS pointer. */
#define DEVINS_2_PCIGLOBALS(pDevIns) ((PPCIGLOBALS)(PDMINS_2_DATA(pDevIns, PPCIGLOBALS)))
/** Converts a device instance pointer to a PCIBUS pointer. */
#define DEVINS_2_PCIBUS(pDevIns) ((PPCIBUS)(&PDMINS_2_DATA(pDevIns, PPCIGLOBALS)->PciBus))
/** Converts a pointer to a PCI bus instance to a PCIGLOBALS pointer.
* @note This works only if the bus number is 0!!!
*/
#define PCIBUS_2_PCIGLOBALS(pPciBus) ( (PPCIGLOBALS)((uintptr_t)(pPciBus) - RT_OFFSETOF(PCIGLOBALS, PciBus)) )
/** @def PCI_LOCK
* Acquires the PDM lock. This is a NOP if locking is disabled. */
/** @def PCI_UNLOCK
* Releases the PDM lock. This is a NOP if locking is disabled. */
#define PCI_LOCK(pDevIns, rc) \
do { \
int rc2 = DEVINS_2_PCIBUS(pDevIns)->CTX_SUFF(pPciHlp)->pfnLock((pDevIns), rc); \
if (rc2 != VINF_SUCCESS) \
return rc2; \
} while (0)
#define PCI_UNLOCK(pDevIns) \
DEVINS_2_PCIBUS(pDevIns)->CTX_SUFF(pPciHlp)->pfnUnlock(pDevIns)
/** @def VBOX_PCI_SAVED_STATE_VERSION
* Saved state version of the PCI bus device.
*/
#define VBOX_PCI_SAVED_STATE_VERSION 3
#ifndef VBOX_DEVICE_STRUCT_TESTCASE
/*******************************************************************************
* Internal Functions *
*******************************************************************************/
__BEGIN_DECLS
PDMBOTHCBDECL(void) pciSetIrq(PPDMDEVINS pDevIns, PPCIDEVICE pPciDev, int iIrq, int iLevel);
PDMBOTHCBDECL(void) pcibridgeSetIrq(PPDMDEVINS pDevIns, PPCIDEVICE pPciDev, int iIrq, int iLevel);
PDMBOTHCBDECL(int) pciIOPortAddressWrite(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb);
PDMBOTHCBDECL(int) pciIOPortAddressRead(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t *pu32, unsigned cb);
PDMBOTHCBDECL(int) pciIOPortDataWrite(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb);
PDMBOTHCBDECL(int) pciIOPortDataRead(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t *pu32, unsigned cb);
#ifdef IN_RING3
DECLINLINE(PPCIDEVICE) pciFindBridge(PPCIBUS pBus, uint8_t iBus);
#endif
__END_DECLS
#define DEBUG_PCI
#define PCI_VENDOR_ID 0x00 /* 16 bits */
#define PCI_DEVICE_ID 0x02 /* 16 bits */
#define PCI_COMMAND 0x04 /* 16 bits */
#define PCI_COMMAND_IO 0x01 /* Enable response in I/O space */
#define PCI_COMMAND_MEMORY 0x02 /* Enable response in Memory space */
#define PCI_CLASS_DEVICE 0x0a /* Device class */
#define PCI_INTERRUPT_LINE 0x3c /* 8 bits */
#define PCI_INTERRUPT_PIN 0x3d /* 8 bits */
#define PCI_MIN_GNT 0x3e /* 8 bits */
#define PCI_MAX_LAT 0x3f /* 8 bits */
#ifdef IN_RING3
static void pci_update_mappings(PCIDevice *d)
{
PPCIBUS pBus = d->Int.s.CTX_SUFF(pBus);
PCIIORegion *r;
int cmd, i;
uint32_t last_addr, new_addr, config_ofs;
cmd = RT_LE2H_U16(*(uint16_t *)(d->config + PCI_COMMAND));
for(i = 0; i < PCI_NUM_REGIONS; i++) {
r = &d->Int.s.aIORegions[i];
if (i == PCI_ROM_SLOT) {
config_ofs = 0x30;
} else {
config_ofs = 0x10 + i * 4;
}
if (r->size != 0) {
if (r->type & PCI_ADDRESS_SPACE_IO) {
if (cmd & PCI_COMMAND_IO) {
new_addr = RT_LE2H_U32(*(uint32_t *)(d->config +
config_ofs));
new_addr = new_addr & ~(r->size - 1);
last_addr = new_addr + r->size - 1;
/* NOTE: we have only 64K ioports on PC */
if (last_addr <= new_addr || new_addr == 0 ||
last_addr >= 0x10000) {
new_addr = ~0U;
}
} else {
new_addr = ~0U;
}
} else {
if (cmd & PCI_COMMAND_MEMORY) {
new_addr = RT_LE2H_U32(*(uint32_t *)(d->config +
config_ofs));
/* the ROM slot has a specific enable bit */
if (i == PCI_ROM_SLOT && !(new_addr & 1))
goto no_mem_map;
new_addr = new_addr & ~(r->size - 1);
last_addr = new_addr + r->size - 1;
/* NOTE: we do not support wrapping */
/* XXX: as we cannot support really dynamic
mappings, we handle specific values as invalid
mappings. */
if (last_addr <= new_addr || new_addr == 0 ||
last_addr == ~0U) {
new_addr = ~0U;
}
} else {
no_mem_map:
new_addr = ~0U;
}
}
/* now do the real mapping */
if (new_addr != r->addr) {
if (r->addr != ~0U) {
if (r->type & PCI_ADDRESS_SPACE_IO) {
int devclass;
/* NOTE: specific hack for IDE in PC case:
only one byte must be mapped. */
devclass = d->config[0x0a] | (d->config[0x0b] << 8);
if (devclass == 0x0101 && r->size == 4) {
int rc = d->pDevIns->pDevHlpR3->pfnIOPortDeregister(d->pDevIns, r->addr + 2, 1);
AssertRC(rc);
} else {
int rc = d->pDevIns->pDevHlpR3->pfnIOPortDeregister(d->pDevIns, r->addr, r->size);
AssertRC(rc);
}
} else {
RTGCPHYS GCPhysBase = r->addr;
int rc;
if (pBus->pPciHlpR3->pfnIsMMIO2Base(pBus->pDevInsR3, d->pDevIns, GCPhysBase))
{
/* unmap it. */
rc = r->map_func(d, i, NIL_RTGCPHYS, r->size, (PCIADDRESSSPACE)(r->type));
AssertRC(rc);
rc = PDMDevHlpMMIO2Unmap(d->pDevIns, i, GCPhysBase);
}
else
rc = d->pDevIns->pDevHlpR3->pfnMMIODeregister(d->pDevIns, GCPhysBase, r->size);
AssertMsgRC(rc, ("rc=%Rrc d=%s i=%d GCPhysBase=%RGp size=%#x\n", rc, d->name, i, GCPhysBase, r->size));
}
}
r->addr = new_addr;
if (r->addr != ~0U) {
int rc = r->map_func(d, i,
r->addr + (r->type & PCI_ADDRESS_SPACE_IO ? 0 : 0),
r->size, (PCIADDRESSSPACE)(r->type));
AssertRC(rc);
}
}
}
}
}
static DECLCALLBACK(uint32_t) pci_default_read_config(PCIDevice *d, uint32_t address, unsigned len)
{
uint32_t val;
switch(len) {
case 1:
val = d->config[address];
break;
case 2:
val = RT_LE2H_U16(*(uint16_t *)(d->config + address));
break;
default:
case 4:
val = RT_LE2H_U32(*(uint32_t *)(d->config + address));
break;
}
return val;
}
static DECLCALLBACK(void) pci_default_write_config(PCIDevice *d, uint32_t address, uint32_t val, unsigned len)
{
int can_write;
unsigned i;
uint32_t end, addr;
if (len == 4 && ((address >= 0x10 && address < 0x10 + 4 * 6) ||
(address >= 0x30 && address < 0x34))) {
PCIIORegion *r;
int reg;
if ( address >= 0x30 ) {
reg = PCI_ROM_SLOT;
}else{
reg = (address - 0x10) >> 2;
}
r = &d->Int.s.aIORegions[reg];
if (r->size == 0)
goto default_config;
/* compute the stored value */
if (reg == PCI_ROM_SLOT) {
/* keep ROM enable bit */
val &= (~(r->size - 1)) | 1;
} else {
val &= ~(r->size - 1);
val |= r->type;
}
*(uint32_t *)(d->config + address) = RT_H2LE_U32(val);
pci_update_mappings(d);
return;
}
default_config:
/* not efficient, but simple */
addr = address;
for(i = 0; i < len; i++) {
/* default read/write accesses */
switch(d->config[0x0e]) {
case 0x00: /* normal device */
case 0x80: /* multi-function device */
switch(addr) {
case 0x00:
case 0x01:
case 0x02:
case 0x03:
case 0x08:
case 0x09:
case 0x0a:
case 0x0b:
case 0x0e:
case 0x10: case 0x11: case 0x12: case 0x13: case 0x14: case 0x15: case 0x16: case 0x17: /* base */
case 0x18: case 0x19: case 0x1a: case 0x1b: case 0x1c: case 0x1d: case 0x1e: case 0x1f:
case 0x20: case 0x21: case 0x22: case 0x23: case 0x24: case 0x25: case 0x26: case 0x27:
case 0x2c: case 0x2d: /* subsystem ID */
case 0x2e: case 0x2f: /* vendor ID */
case 0x30: case 0x31: case 0x32: case 0x33: /* rom */
case 0x3d:
can_write = 0;
break;
default:
can_write = 1;
break;
}
break;
default:
case 0x01: /* bridge */
switch(addr) {
case 0x00:
case 0x01:
case 0x02:
case 0x03:
case 0x08:
case 0x09:
case 0x0a:
case 0x0b:
case 0x0e:
case 0x38: case 0x39: case 0x3a: case 0x3b: /* rom */
case 0x3d:
can_write = 0;
break;
default:
can_write = 1;
break;
}
break;
}
#ifdef VBOX
if (addr == 0x06)
{
/* don't change read-only bits => actually all lower bits are read-only */
val &= UINT32_C(~0xff);
/* status register, low part: clear bits by writing a '1' to the corresponding bit */
d->config[addr] &= ~val;
}
else if (addr == 0x07)
{
/* don't change read-only bits */
val &= UINT32_C(~0x06);
/* status register, high part: clear bits by writing a '1' to the corresponding bit */
d->config[addr] &= ~val;
}
else
#endif
if (can_write) {
d->config[addr] = val;
}
addr++;
val >>= 8;
}
end = address + len;
if (end > PCI_COMMAND && address < (PCI_COMMAND + 2)) {
/* if the command register is modified, we must modify the mappings */
pci_update_mappings(d);
}
}
#endif /* IN_RING3 */
static int pci_data_write(PPCIGLOBALS pGlobals, uint32_t addr, uint32_t val, int len)
{
uint8_t iBus, iDevice;
uint32_t config_addr;
Log(("pci_data_write: addr=%08x val=%08x len=%d\n", pGlobals->uConfigReg, val, len));
if (!(pGlobals->uConfigReg & (1 << 31))) {
return VINF_SUCCESS;
}
if ((pGlobals->uConfigReg & 0x3) != 0) {
return VINF_SUCCESS;
}
iBus = (pGlobals->uConfigReg >> 16) & 0xff;
iDevice = (pGlobals->uConfigReg >> 8) & 0xff;
config_addr = (pGlobals->uConfigReg & 0xfc) | (addr & 3);
if (iBus != 0)
{
if (pGlobals->PciBus.cBridges)
{
#ifdef IN_RING3 /** @todo do lookup in R0/RC too! */
PPCIDEVICE pBridgeDevice = pciFindBridge(&pGlobals->PciBus, iBus);
if (pBridgeDevice)
{
AssertPtr(pBridgeDevice->Int.s.pfnBridgeConfigWrite);
pBridgeDevice->Int.s.pfnBridgeConfigWrite(pBridgeDevice->pDevIns, iBus, iDevice, config_addr, val, len);
}
#else
return VINF_IOM_HC_IOPORT_WRITE;
#endif
}
}
else
{
R3PTRTYPE(PCIDevice *) pci_dev = pGlobals->PciBus.devices[iDevice];
if (pci_dev)
{
#ifdef IN_RING3
Log(("pci_config_write: %s: addr=%02x val=%08x len=%d\n", pci_dev->name, config_addr, val, len));
pci_dev->Int.s.pfnConfigWrite(pci_dev, config_addr, val, len);
#else
return VINF_IOM_HC_IOPORT_WRITE;
#endif
}
}
return VINF_SUCCESS;
}
static int pci_data_read(PPCIGLOBALS pGlobals, uint32_t addr, int len, uint32_t *pu32)
{
uint8_t iBus, iDevice;
uint32_t config_addr;
*pu32 = 0xffffffff;
if (!(pGlobals->uConfigReg & (1 << 31)))
return VINF_SUCCESS;
if ((pGlobals->uConfigReg & 0x3) != 0)
return VINF_SUCCESS;
iBus = (pGlobals->uConfigReg >> 16) & 0xff;
iDevice = (pGlobals->uConfigReg >> 8) & 0xff;
config_addr = (pGlobals->uConfigReg & 0xfc) | (addr & 3);
if (iBus != 0)
{
if (pGlobals->PciBus.cBridges)
{
#ifdef IN_RING3 /** @todo do lookup in R0/RC too! */
PPCIDEVICE pBridgeDevice = pciFindBridge(&pGlobals->PciBus, iBus);
if (pBridgeDevice)
{
AssertPtr(pBridgeDevice->Int.s.pfnBridgeConfigRead);
*pu32 = pBridgeDevice->Int.s.pfnBridgeConfigRead(pBridgeDevice->pDevIns, iBus, iDevice, config_addr, len);
}
#else
return VINF_IOM_HC_IOPORT_READ;
#endif
}
}
else
{
R3PTRTYPE(PCIDevice *) pci_dev = pGlobals->PciBus.devices[iDevice];
if (pci_dev)
{
#ifdef IN_RING3
*pu32 = pci_dev->Int.s.pfnConfigRead(pci_dev, config_addr, len);
Log(("pci_config_read: %s: addr=%02x val=%08x len=%d\n", pci_dev->name, config_addr, *pu32, len));
#else
return VINF_IOM_HC_IOPORT_READ;
#endif
}
}
return VINF_SUCCESS;
}
/* return the global irq number corresponding to a given device irq
pin. We could also use the bus number to have a more precise
mapping.
This is the implementation note described in the PCI spec chapter 2.2.6 */
static inline int pci_slot_get_pirq(uint8_t uDevFn, int irq_num)
{
int slot_addend;
slot_addend = (uDevFn >> 3) - 1;
return (irq_num + slot_addend) & 3;
}
static inline int pci_slot_get_apic_pirq(uint8_t uDevFn, int irq_num)
{
return (irq_num + (uDevFn >> 3)) & 7;
}
static inline int get_pci_irq_apic_level(PPCIGLOBALS pGlobals, int irq_num)
{
return (pGlobals->pci_apic_irq_levels[irq_num] != 0);
}
static void apic_set_irq(PPCIBUS pBus, uint8_t uDevFn, PCIDevice *pPciDev, int irq_num1, int iLevel, int acpi_irq)
{
/* This is only allowed to be called with a pointer to the host bus. */
AssertMsg(pBus->iBus == 0, ("iBus=%u\n", pBus->iBus));
if (acpi_irq == -1) {
int apic_irq, apic_level;
PPCIGLOBALS pGlobals = PCIBUS_2_PCIGLOBALS(pBus);
int irq_num = pci_slot_get_apic_pirq(uDevFn, irq_num1);
if ((iLevel & PDM_IRQ_LEVEL_HIGH) == PDM_IRQ_LEVEL_HIGH)
ASMAtomicIncU32(&pGlobals->pci_apic_irq_levels[irq_num]);
else if ((iLevel & PDM_IRQ_LEVEL_HIGH) == PDM_IRQ_LEVEL_LOW)
ASMAtomicDecU32(&pGlobals->pci_apic_irq_levels[irq_num]);
apic_irq = irq_num + 0x10;
apic_level = get_pci_irq_apic_level(pGlobals, irq_num);
Log3(("apic_set_irq: %s: irq_num1=%d level=%d apic_irq=%d apic_level=%d irq_num1=%d\n",
R3STRING(pPciDev->name), irq_num1, iLevel, apic_irq, apic_level, irq_num));
pBus->CTX_SUFF(pPciHlp)->pfnIoApicSetIrq(pBus->CTX_SUFF(pDevIns), apic_irq, apic_level);
if ((iLevel & PDM_IRQ_LEVEL_FLIP_FLOP) == PDM_IRQ_LEVEL_FLIP_FLOP) {
ASMAtomicDecU32(&pGlobals->pci_apic_irq_levels[irq_num]);
pPciDev->Int.s.uIrqPinState = PDM_IRQ_LEVEL_LOW;
apic_level = get_pci_irq_apic_level(pGlobals, irq_num);
Log3(("apic_set_irq: %s: irq_num1=%d level=%d apic_irq=%d apic_level=%d irq_num1=%d (flop)\n",
R3STRING(pPciDev->name), irq_num1, iLevel, apic_irq, apic_level, irq_num));
pBus->CTX_SUFF(pPciHlp)->pfnIoApicSetIrq(pBus->CTX_SUFF(pDevIns), apic_irq, apic_level);
}
} else {
Log3(("apic_set_irq: %s: irq_num1=%d level=%d acpi_irq=%d\n",
R3STRING(pPciDev->name), irq_num1, iLevel, acpi_irq));
pBus->CTX_SUFF(pPciHlp)->pfnIoApicSetIrq(pBus->CTX_SUFF(pDevIns), acpi_irq, iLevel);
}
}
DECLINLINE(int) get_pci_irq_level(PPCIGLOBALS pGlobals, int irq_num)
{
return (pGlobals->pci_irq_levels[irq_num] != 0);
}
/**
* Set the IRQ for a PCI device on the host bus - shared by host bus and bridge.
*
* @param pDevIns Device instance of the host PCI Bus.
* @param uDevFn The device number on the host bus which will raise the IRQ
* @param pPciDev The PCI device structure which raised the interrupt.
* @param iIrq IRQ number to set.
* @param iLevel IRQ level.
* @remark uDevFn and pPciDev->devfn are not the same if the device is behind a bridge.
* In that case uDevFn will be the slot of the bridge which is needed to calculate the
* PIRQ value.
*/
static void pciSetIrqInternal(PPCIGLOBALS pGlobals, uint8_t uDevFn, PPCIDEVICE pPciDev, int iIrq, int iLevel)
{
PPCIBUS pBus = &pGlobals->PciBus;
uint8_t *pbCfg = pGlobals->PIIX3State.dev.config;
const bool fIsAcpiDevice = pPciDev->config[2] == 0x13 && pPciDev->config[3] == 0x71;
const bool fIsApicEnabled = pGlobals->fUseIoApic && pbCfg[0xde] == 0xbe && pbCfg[0xad] == 0xef;
int pic_irq, pic_level;
/* Check if the state changed. */
if (pPciDev->Int.s.uIrqPinState != iLevel)
{
pPciDev->Int.s.uIrqPinState = (iLevel & PDM_IRQ_LEVEL_HIGH);
/* apic only */
if (fIsApicEnabled)
{
if (fIsAcpiDevice)
/*
* ACPI needs special treatment since SCI is hardwired and
* should not be affected by PCI IRQ routing tables at the
* same time SCI IRQ is shared in PCI sense hence this
* kludge (i.e. we fetch the hardwired value from ACPIs
* PCI device configuration space).
*/
apic_set_irq(pBus, uDevFn, pPciDev, -1, iLevel, pPciDev->config[PCI_INTERRUPT_LINE]);
else
apic_set_irq(pBus, uDevFn, pPciDev, iIrq, iLevel, -1);
return;
}
if (fIsAcpiDevice)
{
/* As per above treat ACPI in a special way */
pic_irq = pPciDev->config[PCI_INTERRUPT_LINE];
pGlobals->acpi_irq = pic_irq;
pGlobals->acpi_irq_level = iLevel & PDM_IRQ_LEVEL_HIGH;
}
else
{
int irq_num;
irq_num = pci_slot_get_pirq(uDevFn, iIrq);
if (pPciDev->Int.s.uIrqPinState == PDM_IRQ_LEVEL_HIGH)
ASMAtomicIncU32(&pGlobals->pci_irq_levels[irq_num]);
else if (pPciDev->Int.s.uIrqPinState == PDM_IRQ_LEVEL_LOW)
ASMAtomicDecU32(&pGlobals->pci_irq_levels[irq_num]);
/* now we change the pic irq level according to the piix irq mappings */
pic_irq = pbCfg[0x60 + irq_num];
if (pic_irq >= 16)
{
if ((iLevel & PDM_IRQ_LEVEL_FLIP_FLOP) == PDM_IRQ_LEVEL_FLIP_FLOP)
{
ASMAtomicDecU32(&pGlobals->pci_irq_levels[irq_num]);
pPciDev->Int.s.uIrqPinState = PDM_IRQ_LEVEL_LOW;
}
return;
}
}
/* the pic level is the logical OR of all the PCI irqs mapped to it */
pic_level = 0;
if (pic_irq == pbCfg[0x60])
pic_level |= get_pci_irq_level(pGlobals, 0);
if (pic_irq == pbCfg[0x61])
pic_level |= get_pci_irq_level(pGlobals, 1);
if (pic_irq == pbCfg[0x62])
pic_level |= get_pci_irq_level(pGlobals, 2);
if (pic_irq == pbCfg[0x63])
pic_level |= get_pci_irq_level(pGlobals, 3);
if (pic_irq == pGlobals->acpi_irq)
pic_level |= pGlobals->acpi_irq_level;
Log3(("pciSetIrq: %s: iLevel=%d iIrq=%d pic_irq=%d pic_level=%d\n",
R3STRING(pPciDev->name), iLevel, iIrq, pic_irq, pic_level));
pBus->CTX_SUFF(pPciHlp)->pfnIsaSetIrq(pBus->CTX_SUFF(pDevIns), pic_irq, pic_level);
/** @todo optimize pci irq flip-flop some rainy day. */
if ((iLevel & PDM_IRQ_LEVEL_FLIP_FLOP) == PDM_IRQ_LEVEL_FLIP_FLOP)
pciSetIrqInternal(pGlobals, uDevFn, pPciDev, iIrq, PDM_IRQ_LEVEL_LOW);
}
}
/**
* Set the IRQ for a PCI device on the host bus.
*
* @param pDevIns Device instance of the PCI Bus.
* @param pPciDev The PCI device structure.
* @param iIrq IRQ number to set.
* @param iLevel IRQ level.
*/
PDMBOTHCBDECL(void) pciSetIrq(PPDMDEVINS pDevIns, PPCIDEVICE pPciDev, int iIrq, int iLevel)
{
pciSetIrqInternal(PDMINS_2_DATA(pDevIns, PPCIGLOBALS), pPciDev->devfn, pPciDev, iIrq, iLevel);
}
#ifdef IN_RING3
/**
* Finds a bridge on the bus which contains the destination bus.
*
* @return Pointer to the device instance data of the bus or
* NULL if no bridge was found.
* @param pBus Pointer to the bus to search on.
* @param iBus Destination bus number.
*/
DECLINLINE(PPCIDEVICE) pciFindBridge(PPCIBUS pBus, uint8_t iBus)
{
/* Search for a fitting bridge. */
for (uint32_t iBridge = 0; iBridge < pBus->cBridges; iBridge++)
{
/*
* Examine secondary and subordinate bus number.
* If the target bus is in the range we pass the request on to the bridge.
*/
PPCIDEVICE pBridgeTemp = pBus->papBridgesR3[iBridge];
AssertMsg(pBridgeTemp && pBridgeTemp->Int.s.fPciToPciBridge,
("Device is not a PCI bridge but on the list of PCI bridges\n"));
if ( iBus >= pBridgeTemp->config[VBOX_PCI_SECONDARY_BUS]
&& iBus <= pBridgeTemp->config[VBOX_PCI_SUBORDINATE_BUS])
return pBridgeTemp;
}
/* Nothing found. */
return NULL;
}
static void piix3_reset(PIIX3State *d)
{
uint8_t *pci_conf = d->dev.config;
pci_conf[0x04] = 0x07; /* master, memory and I/O */
pci_conf[0x05] = 0x00;
pci_conf[0x06] = 0x00;
pci_conf[0x07] = 0x02; /* PCI_status_devsel_medium */
pci_conf[0x4c] = 0x4d;
pci_conf[0x4e] = 0x03;
pci_conf[0x4f] = 0x00;
pci_conf[0x60] = 0x80;
pci_conf[0x69] = 0x02;
pci_conf[0x70] = 0x80;
pci_conf[0x76] = 0x0c;
pci_conf[0x77] = 0x0c;
pci_conf[0x78] = 0x02;
pci_conf[0x79] = 0x00;
pci_conf[0x80] = 0x00;
pci_conf[0x82] = 0x02; /* Get rid of the Linux guest "Enabling Passive Release" PCI quirk warning. */
pci_conf[0xa0] = 0x08;
pci_conf[0xa0] = 0x08;
pci_conf[0xa2] = 0x00;
pci_conf[0xa3] = 0x00;
pci_conf[0xa4] = 0x00;
pci_conf[0xa5] = 0x00;
pci_conf[0xa6] = 0x00;
pci_conf[0xa7] = 0x00;
pci_conf[0xa8] = 0x0f;
pci_conf[0xaa] = 0x00;
pci_conf[0xab] = 0x00;
pci_conf[0xac] = 0x00;
pci_conf[0xae] = 0x00;
}
static void pci_config_writel(PPCIGLOBALS pGlobals, uint8_t uBus, uint8_t uDevFn, uint32_t addr, uint32_t val)
{
pGlobals->uConfigReg = 0x80000000 | (uBus << 16) |
(uDevFn << 8) | addr;
pci_data_write(pGlobals, 0, val, 4);
}
static void pci_config_writew(PPCIGLOBALS pGlobals, uint8_t uBus, uint8_t uDevFn, uint32_t addr, uint32_t val)
{
pGlobals->uConfigReg = 0x80000000 | (uBus << 16) |
(uDevFn << 8) | (addr & ~3);
pci_data_write(pGlobals, addr & 3, val, 2);
}
static void pci_config_writeb(PPCIGLOBALS pGlobals, uint8_t uBus, uint8_t uDevFn, uint32_t addr, uint32_t val)
{
pGlobals->uConfigReg = 0x80000000 | (uBus << 16) |
(uDevFn << 8) | (addr & ~3);
pci_data_write(pGlobals, addr & 3, val, 1);
}
static uint32_t pci_config_readl(PPCIGLOBALS pGlobals, uint8_t uBus, uint8_t uDevFn, uint32_t addr)
{
pGlobals->uConfigReg = 0x80000000 | (uBus << 16) |
(uDevFn << 8) | addr;
uint32_t u32Val;
int rc = pci_data_read(pGlobals, 0, 4, &u32Val);
AssertRC(rc);
return u32Val;
}
static uint32_t pci_config_readw(PPCIGLOBALS pGlobals, uint8_t uBus, uint8_t uDevFn, uint32_t addr)
{
pGlobals->uConfigReg = 0x80000000 | (uBus << 16) |
(uDevFn << 8) | (addr & ~3);
uint32_t u32Val;
int rc = pci_data_read(pGlobals, addr & 3, 2, &u32Val);
AssertRC(rc);
return u32Val;
}
static uint32_t pci_config_readb(PPCIGLOBALS pGlobals, uint8_t uBus, uint8_t uDevFn, uint32_t addr)
{
pGlobals->uConfigReg = 0x80000000 | (uBus << 16) |
(uDevFn << 8) | (addr & ~3);
uint32_t u32Val;
int rc = pci_data_read(pGlobals, addr & 3, 1, &u32Val);
AssertRC(rc);
return u32Val;
}
/* host irqs corresponding to PCI irqs A-D */
static const uint8_t pci_irqs[4] = { 11, 9, 11, 9 }; /* bird: added const */
static void pci_set_io_region_addr(PPCIGLOBALS pGlobals, uint8_t uBus, uint8_t uDevFn, int region_num, uint32_t addr)
{
uint16_t cmd;
uint32_t ofs;
if ( region_num == PCI_ROM_SLOT )
ofs = 0x30;
else
ofs = 0x10 + region_num * 4;
/* Read memory type first. */
uint8_t uRessourceType = pci_config_readb(pGlobals, uBus, uDevFn, ofs);
/* Read command register. */
cmd = pci_config_readw(pGlobals, uBus, uDevFn, PCI_COMMAND);
if ( region_num == PCI_ROM_SLOT )
cmd |= 2;
else if ((uRessourceType & 0x01) == 1) /* Test if region is I/O space. */
cmd |= 1; /* Enable I/O space access. */
else /* The region is MMIO. */
cmd |= 2; /* Enable MMIO access. */
/* Write address of the device. */
pci_config_writel(pGlobals, uBus, uDevFn, ofs, addr);
/* enable memory mappings */
pci_config_writew(pGlobals, uBus, uDevFn, PCI_COMMAND, cmd);
}
static void pci_bios_init_device(PPCIGLOBALS pGlobals, uint8_t uBus, uint8_t uDevFn, uint8_t cBridgeDepth, uint8_t *paBridgePositions)
{
uint32_t *paddr;
int i, pin, pic_irq;
uint16_t devclass, vendor_id, device_id;
devclass = pci_config_readw(pGlobals, uBus, uDevFn, PCI_CLASS_DEVICE);
vendor_id = pci_config_readw(pGlobals, uBus, uDevFn, PCI_VENDOR_ID);
device_id = pci_config_readw(pGlobals, uBus, uDevFn, PCI_DEVICE_ID);
/* Check if device is present. */
if (vendor_id != 0xffff)
{
switch(devclass)
{
case 0x0101:
if ( (vendor_id == 0x8086)
&& (device_id == 0x7010 || device_id == 0x7111 || device_id == 0x269e))
{
/* PIIX3, PIIX4 or ICH6 IDE */
pci_config_writew(pGlobals, uBus, uDevFn, 0x40, 0x8000); /* enable IDE0 */
pci_config_writew(pGlobals, uBus, uDevFn, 0x42, 0x8000); /* enable IDE1 */
goto default_map;
}
else
{
/* IDE: we map it as in ISA mode */
pci_set_io_region_addr(pGlobals, uBus, uDevFn, 0, 0x1f0);
pci_set_io_region_addr(pGlobals, uBus, uDevFn, 1, 0x3f4);
pci_set_io_region_addr(pGlobals, uBus, uDevFn, 2, 0x170);
pci_set_io_region_addr(pGlobals, uBus, uDevFn, 3, 0x374);
}
break;
case 0x0300:
if (vendor_id != 0x80ee)
goto default_map;
/* VGA: map frame buffer to default Bochs VBE address */
pci_set_io_region_addr(pGlobals, uBus, uDevFn, 0, 0xE0000000);
#ifdef VBOX_WITH_EFI
/* The following is necessary for the VGA check in
PciVgaMiniPortDriverBindingSupported to succeed. */
/** @todo Seems we're missing some I/O registers or something on the VGA device... Compare real/virt hw with lspci. */
pci_config_writew(pGlobals, uBus, uDevFn, PCI_COMMAND,
pci_config_readw(pGlobals, uBus, uDevFn, PCI_COMMAND)
| 1 /* Enable I/O space access. */);
#endif
break;
case 0x0800:
/* PIC */
vendor_id = pci_config_readw(pGlobals, uBus, uDevFn, PCI_VENDOR_ID);
device_id = pci_config_readw(pGlobals, uBus, uDevFn, PCI_DEVICE_ID);
if (vendor_id == 0x1014)
{
/* IBM */
if (device_id == 0x0046 || device_id == 0xFFFF)
{
/* MPIC & MPIC2 */
pci_set_io_region_addr(pGlobals, uBus, uDevFn, 0, 0x80800000 + 0x00040000);
}
}
break;
case 0xff00:
if ( (vendor_id == 0x0106b)
&& (device_id == 0x0017 || device_id == 0x0022))
{
/* macio bridge */
pci_set_io_region_addr(pGlobals, uBus, uDevFn, 0, 0x80800000);
}
break;
case 0x0604:
{
/* Init PCI-to-PCI bridge. */
pci_config_writeb(pGlobals, uBus, uDevFn, VBOX_PCI_PRIMARY_BUS, uBus);
AssertMsg(pGlobals->uBus < 255, ("Too many bridges on the bus\n"));
pGlobals->uBus++;
pci_config_writeb(pGlobals, uBus, uDevFn, VBOX_PCI_SECONDARY_BUS, pGlobals->uBus);
pci_config_writeb(pGlobals, uBus, uDevFn, VBOX_PCI_SUBORDINATE_BUS, 0xff); /* Temporary until we know how many other bridges are behind this one. */
/* Add position of this bridge into the array. */
paBridgePositions[cBridgeDepth+1] = (uDevFn >> 3);
/*
* The I/O range for the bridge must be aligned to a 4KB boundary.
* This does not change anything really as the access to the device is not going
* through the bridge but we want to be compliant to the spec.
*/
if ((pGlobals->pci_bios_io_addr % 4096) != 0)
pGlobals->pci_bios_io_addr = RT_ALIGN_32(pGlobals->pci_bios_io_addr, 4*1024);
Log(("%s: Aligned I/O start address. New address %#x\n", __FUNCTION__, pGlobals->pci_bios_io_addr));
pci_config_writeb(pGlobals, uBus, uDevFn, VBOX_PCI_IO_BASE, (pGlobals->pci_bios_io_addr >> 8) & 0xf0);
/* The MMIO range for the bridge must be aligned to a 1MB boundary. */
if ((pGlobals->pci_bios_mem_addr % (1024 * 1024)) != 0)
pGlobals->pci_bios_mem_addr = RT_ALIGN_32(pGlobals->pci_bios_mem_addr, 1024*1024);
Log(("%s: Aligned MMIO start address. New address %#x\n", __FUNCTION__, pGlobals->pci_bios_mem_addr));
pci_config_writew(pGlobals, uBus, uDevFn, VBOX_PCI_MEMORY_BASE, (pGlobals->pci_bios_mem_addr >> 16) & UINT32_C(0xffff0));
/* Save values to compare later to. */
uint32_t u32IoAddressBase = pGlobals->pci_bios_io_addr;
uint32_t u32MMIOAddressBase = pGlobals->pci_bios_mem_addr;
/* Init devices behind the bridge and possibly other bridges as well. */
for (int i = 0; i <= 255; i++)
pci_bios_init_device(pGlobals, uBus + 1, i, cBridgeDepth + 1, paBridgePositions);
/* The number of bridges behind the this one is now available. */
pci_config_writeb(pGlobals, uBus, uDevFn, VBOX_PCI_SUBORDINATE_BUS, pGlobals->uBus);
/*
* Set I/O limit register. If there is no device with I/O space behind the bridge
* we set a lower value than in the base register.
* The result with a real bridge is that no I/O transactions are passed to the secondary
* interface. Again this doesn't really matter here but we want to be compliant to the spec.
*/
if ((u32IoAddressBase != pGlobals->pci_bios_io_addr) && ((pGlobals->pci_bios_io_addr % 4096) != 0))
{
/* The upper boundary must be one byte less than a 4KB boundary. */
pGlobals->pci_bios_io_addr = RT_ALIGN_32(pGlobals->pci_bios_io_addr, 4*1024);
}
pci_config_writeb(pGlobals, uBus, uDevFn, VBOX_PCI_IO_LIMIT, ((pGlobals->pci_bios_io_addr >> 8) & 0xf0) - 1);
/* Same with the MMIO limit register but with 1MB boundary here. */
if ((u32MMIOAddressBase != pGlobals->pci_bios_mem_addr) && ((pGlobals->pci_bios_mem_addr % (1024 * 1024)) != 0))
{
/* The upper boundary must be one byte less than a 1MB boundary. */
pGlobals->pci_bios_mem_addr = RT_ALIGN_32(pGlobals->pci_bios_mem_addr, 1024*1024);
}
pci_config_writew(pGlobals, uBus, uDevFn, VBOX_PCI_MEMORY_LIMIT, ((pGlobals->pci_bios_mem_addr >> 16) & UINT32_C(0xfff0)) - 1);
/*
* Set the prefetch base and limit registers. We currently have no device with a prefetchable region
* which may be behind a bridge. Thatswhy it is unconditionally disabled here atm by writing a higher value into
* the base register than in the limit register.
*/
pci_config_writew(pGlobals, uBus, uDevFn, VBOX_PCI_PREF_MEMORY_BASE, 0xfff0);
pci_config_writew(pGlobals, uBus, uDevFn, VBOX_PCI_PREF_MEMORY_LIMIT, 0x0);
pci_config_writel(pGlobals, uBus, uDevFn, VBOX_PCI_PREF_BASE_UPPER32, 0x00);
pci_config_writel(pGlobals, uBus, uDevFn, VBOX_PCI_PREF_LIMIT_UPPER32, 0x00);
break;
}
default:
default_map:
{
/* default memory mappings */
/*
* PCI_NUM_REGIONS is 7 because of the rom region but there are only 6 base address register defined by the PCI spec.
* Leaving only PCI_NUM_REGIONS would cause reading another and enabling a memory region which does not exist.
*/
for(i = 0; i < (PCI_NUM_REGIONS-1); i++)
{
uint32_t u32Size;
uint8_t u8RessourceType;
uint32_t u32Address = 0x10 + i * 4;
/* Calculate size. */
u8RessourceType = pci_config_readb(pGlobals, uBus, uDevFn, u32Address);
pci_config_writel(pGlobals, uBus, uDevFn, u32Address, UINT32_C(0xffffffff));
u32Size = pci_config_readl(pGlobals, uBus, uDevFn, u32Address);
/* Clear ressource information depending on ressource type. */
if ((u8RessourceType & 0x01) == 1) /* I/O */
u32Size &= ~(0x01);
else /* MMIO */
u32Size &= ~(0x0f);
/*
* Invert all bits and add 1 to get size of the region.
* (From PCI implementation note)
*/
if (((u8RessourceType & 0x01) == 1) && (u32Size & UINT32_C(0xffff0000)) == 0)
u32Size = (~(u32Size | UINT32_C(0xffff0000))) + 1;
else
u32Size = (~u32Size) + 1;
Log(("%s: Size of region %u for device %d on bus %d is %u\n", __FUNCTION__, i, uDevFn, uBus, u32Size));
if (u32Size)
{
if ((u8RessourceType & 0x01) == 1)
paddr = &pGlobals->pci_bios_io_addr;
else
paddr = &pGlobals->pci_bios_mem_addr;
*paddr = (*paddr + u32Size - 1) & ~(u32Size - 1);
Log(("%s: Start address of %s region %u is %#x\n", __FUNCTION__, ((u8RessourceType & 0x01) == 1 ? "I/O" : "MMIO"), i, *paddr));
pci_set_io_region_addr(pGlobals, uBus, uDevFn, i, *paddr);
*paddr += u32Size;
Log(("%s: New address is %#x\n", __FUNCTION__, *paddr));
}
}
break;
}
}
/* map the interrupt */
pin = pci_config_readb(pGlobals, uBus, uDevFn, PCI_INTERRUPT_PIN);
if (pin != 0)
{
uint8_t uBridgeDevFn = uDevFn;
pin--;
/* We need to go up to the host bus to see which irq this device will assert there. */
while (cBridgeDepth != 0)
{
/* Get the pin the device would assert on the bridge. */
pin = ((uBridgeDevFn >> 3) + pin) & 3;
uBridgeDevFn = paBridgePositions[cBridgeDepth];
cBridgeDepth--;
}
pin = pci_slot_get_pirq(uDevFn, pin);
pic_irq = pci_irqs[pin];
pci_config_writeb(pGlobals, uBus, uDevFn, PCI_INTERRUPT_LINE, pic_irq);
}
}
}
#endif /* IN_RING3 */
/* -=-=-=-=-=- wrappers -=-=-=-=-=- */
/**
* Port I/O Handler for PCI address OUT operations.
*
* @returns VBox status code.
*
* @param pDevIns The device instance.
* @param pvUser User argument - ignored.
* @param uPort Port number used for the IN operation.
* @param u32 The value to output.
* @param cb The value size in bytes.
*/
PDMBOTHCBDECL(int) pciIOPortAddressWrite(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb)
{
Log(("pciIOPortAddressWrite: Port=%#x u32=%#x cb=%d\n", Port, u32, cb));
NOREF(pvUser);
if (cb == 4)
{
PPCIGLOBALS pThis = PDMINS_2_DATA(pDevIns, PPCIGLOBALS);
PCI_LOCK(pDevIns, VINF_IOM_HC_IOPORT_WRITE);
pThis->uConfigReg = u32;
PCI_UNLOCK(pDevIns);
}
/* else: 440FX does "pass through to the bus" for other writes, what ever that means.
* Linux probes for cmd640 using byte writes/reads during ide init. We'll just ignore it. */
return VINF_SUCCESS;
}
/**
* Port I/O Handler for PCI address IN operations.
*
* @returns VBox status code.
*
* @param pDevIns The device instance.
* @param pvUser User argument - ignored.
* @param uPort Port number used for the IN operation.
* @param pu32 Where to store the result.
* @param cb Number of bytes read.
*/
PDMBOTHCBDECL(int) pciIOPortAddressRead(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t *pu32, unsigned cb)
{
NOREF(pvUser);
if (cb == 4)
{
PPCIGLOBALS pThis = PDMINS_2_DATA(pDevIns, PPCIGLOBALS);
PCI_LOCK(pDevIns, VINF_IOM_HC_IOPORT_READ);
*pu32 = pThis->uConfigReg;
PCI_UNLOCK(pDevIns);
Log(("pciIOPortAddressRead: Port=%#x cb=%d -> %#x\n", Port, cb, *pu32));
return VINF_SUCCESS;
}
/* else: 440FX does "pass through to the bus" for other writes, what ever that means.
* Linux probes for cmd640 using byte writes/reads during ide init. We'll just ignore it. */
Log(("pciIOPortAddressRead: Port=%#x cb=%d VERR_IOM_IOPORT_UNUSED\n", Port, cb));
return VERR_IOM_IOPORT_UNUSED;
}
/**
* Port I/O Handler for PCI data OUT operations.
*
* @returns VBox status code.
*
* @param pDevIns The device instance.
* @param pvUser User argument - ignored.
* @param uPort Port number used for the IN operation.
* @param u32 The value to output.
* @param cb The value size in bytes.
*/
PDMBOTHCBDECL(int) pciIOPortDataWrite(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb)
{
Log(("pciIOPortDataWrite: Port=%#x u32=%#x cb=%d\n", Port, u32, cb));
NOREF(pvUser);
int rc = VINF_SUCCESS;
if (!(Port % cb))
{
PCI_LOCK(pDevIns, VINF_IOM_HC_IOPORT_WRITE);
rc = pci_data_write(PDMINS_2_DATA(pDevIns, PPCIGLOBALS), Port, u32, cb);
PCI_UNLOCK(pDevIns);
}
else
AssertMsgFailed(("Write to port %#x u32=%#x cb=%d\n", Port, u32, cb));
return rc;
}
/**
* Port I/O Handler for PCI data IN operations.
*
* @returns VBox status code.
*
* @param pDevIns The device instance.
* @param pvUser User argument - ignored.
* @param uPort Port number used for the IN operation.
* @param pu32 Where to store the result.
* @param cb Number of bytes read.
*/
PDMBOTHCBDECL(int) pciIOPortDataRead(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t *pu32, unsigned cb)
{
NOREF(pvUser);
if (!(Port % cb))
{
PCI_LOCK(pDevIns, VINF_IOM_HC_IOPORT_READ);
int rc = pci_data_read(PDMINS_2_DATA(pDevIns, PPCIGLOBALS), Port, cb, pu32);
PCI_UNLOCK(pDevIns);
Log(("pciIOPortDataRead: Port=%#x cb=%#x -> %#x (%Rrc)\n", Port, cb, *pu32, rc));
return rc;
}
AssertMsgFailed(("Read from port %#x cb=%d\n", Port, cb));
return VERR_IOM_IOPORT_UNUSED;
}
#ifdef IN_RING3
/**
* Saves a state of the PCI device.
*
* @returns VBox status code.
* @param pDevIns Device instance of the PCI Bus.
* @param pPciDev Pointer to PCI device.
* @param pSSMHandle The handle to save the state to.
*/
static DECLCALLBACK(int) pciGenericSaveExec(PPDMDEVINS pDevIns, PPCIDEVICE pPciDev, PSSMHANDLE pSSMHandle)
{
return SSMR3PutMem(pSSMHandle, &pPciDev->config[0], sizeof(pPciDev->config));
}
/**
* Loads a saved PCI device state.
*
* @returns VBox status code.
* @param pDevIns Device instance of the PCI Bus.
* @param pPciDev Pointer to PCI device.
* @param pSSMHandle The handle to the saved state.
*/
static DECLCALLBACK(int) pciGenericLoadExec(PPDMDEVINS pDevIns, PPCIDEVICE pPciDev, PSSMHANDLE pSSMHandle)
{
return SSMR3GetMem(pSSMHandle, &pPciDev->config[0], sizeof(pPciDev->config));
}
/**
* Saves a state of the PCI device.
*
* @returns VBox status code.
* @param pDevIns The device instance.
* @param pPciDev Pointer to PCI device.
* @param pSSMHandle The handle to save the state to.
*/
static DECLCALLBACK(int) pciSaveExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSMHandle)
{
uint32_t i;
PPCIGLOBALS pThis = PDMINS_2_DATA(pDevIns, PPCIGLOBALS);
PPCIBUS pBus = &pThis->PciBus;
/*
* Bus state data.
*/
SSMR3PutU32(pSSMHandle, pThis->uConfigReg);
SSMR3PutBool(pSSMHandle, pThis->fUseIoApic);
/*
* Save IRQ states.
*/
for (i = 0; i < PCI_IRQ_PINS; i++)
SSMR3PutU32(pSSMHandle, pThis->pci_irq_levels[i]);
for (i = 0; i < PCI_APIC_IRQ_PINS; i++)
SSMR3PutU32(pSSMHandle, pThis->pci_apic_irq_levels[i]);
SSMR3PutU32(pSSMHandle, pThis->acpi_irq_level);
SSMR3PutS32(pSSMHandle, pThis->acpi_irq);
SSMR3PutU32(pSSMHandle, ~0); /* separator */
/*
* Iterate all the devices.
*/
for (i = 0; i < RT_ELEMENTS(pBus->devices); i++)
{
PPCIDEVICE pDev = pBus->devices[i];
if (pDev)
{
int rc;
SSMR3PutU32(pSSMHandle, i);
SSMR3PutMem(pSSMHandle, pDev->config, sizeof(pDev->config));
rc = SSMR3PutS32(pSSMHandle, pDev->Int.s.uIrqPinState);
if (RT_FAILURE(rc))
return rc;
}
}
return SSMR3PutU32(pSSMHandle, ~0); /* terminator */
}
/**
* Common routine for restoring the config registers of a PCI device.
*
* @param pDev The PCI device.
* @param pbSrcConfig The configuration register values to be loaded.
* @param fIsBridge Whether this is a bridge device or not.
*/
static void pciR3CommonRestoreConfig(PPCIDEVICE pDev, uint8_t const *pbSrcConfig, bool fIsBridge)
{
/* This table defines the fields for normal devices and bridge devices, and
the order in which they need to be restored (nothing special there atm). */
static const struct PciField
{
uint8_t off;
uint8_t cb;
uint8_t fWritable;
uint8_t fBridge;
const char *pszName;
} s_aFields[] =
{
/* off,cb,fW,fB, pszName */
{ 0x00, 2, 0, 3, "VENDOR_ID" },
{ 0x02, 2, 0, 3, "DEVICE_ID" },
{ 0x04, 2, 1, 3, "COMMAND" },
{ 0x06, 2, 1, 3, "STATUS" },
{ 0x08, 1, 0, 3, "REVISION_ID" },
{ 0x09, 1, 0, 3, "CLASS_PROG" },
{ 0x0a, 1, 0, 3, "CLASS_SUB" },
{ 0x0b, 1, 0, 3, "CLASS_BASE" },
{ 0x0c, 1, 0, 3, "CACHE_LINE_SIZE" }, // fWritable = ??
{ 0x0d, 1, 0, 3, "LATENCY_TIMER" }, // fWritable = ??
{ 0x0e, 1, 0, 3, "HEADER_TYPE" }, // fWritable = ??
{ 0x0f, 1, 0, 3, "BIST" }, // fWritable = ??
{ 0x10, 4, 1, 3, "BASE_ADDRESS_0" },
{ 0x14, 4, 1, 3, "BASE_ADDRESS_1" },
{ 0x18, 4, 1, 3, "BASE_ADDRESS_2" },
{ 0x18, 1, 1, 2, "PRIMARY_BUS" }, // fWritable = ??
{ 0x19, 1, 1, 2, "SECONDARY_BUS" }, // fWritable = ??
{ 0x1a, 1, 1, 2, "SUBORDINATE_BUS" }, // fWritable = ??
{ 0x1b, 1, 1, 2, "SEC_LATENCY_TIMER" }, // fWritable = ??
{ 0x1c, 4, 1, 1, "BASE_ADDRESS_3" },
{ 0x1c, 1, 1, 2, "IO_BASE" }, // fWritable = ??
{ 0x1d, 1, 1, 2, "IO_LIMIT" }, // fWritable = ??
{ 0x1e, 2, 1, 2, "SEC_STATUS" }, // fWritable = ??
{ 0x20, 4, 1, 1, "BASE_ADDRESS_4" },
{ 0x20, 2, 1, 2, "MEMORY_BASE" }, // fWritable = ??
{ 0x22, 2, 1, 2, "MEMORY_LIMIT" }, // fWritable = ??
{ 0x24, 4, 1, 1, "BASE_ADDRESS_4" },
{ 0x24, 2, 1, 2, "PREF_MEMORY_BASE" }, // fWritable = ??
{ 0x26, 2, 1, 2, "PREF_MEMORY_LIMIT" }, // fWritable = ??
{ 0x28, 4, 1, 1, "CARDBUS_CIS" }, // fWritable = ??
{ 0x28, 4, 1, 2, "PREF_BASE_UPPER32" }, // fWritable = ??
{ 0x2c, 2, 0, 1, "SUBSYSTEM_VENDOR_ID" },// fWritable = !?
{ 0x2c, 4, 1, 2, "PREF_LIMIT_UPPER32" },// fWritable = ??
{ 0x2e, 2, 0, 1, "SUBSYSTEM_ID" }, // fWritable = !?
{ 0x30, 4, 1, 1, "ROM_ADDRESS" }, // fWritable = ?!
{ 0x30, 2, 1, 2, "IO_BASE_UPPER16" }, // fWritable = ?!
{ 0x32, 2, 1, 2, "IO_LIMIT_UPPER16" }, // fWritable = ?!
{ 0x34, 4, 0, 3, "CAPABILITY_LIST" }, // fWritable = !? cb=!?
{ 0x38, 4, 1, 2, "ROM_ADDRESS_BR" }, // fWritable = !? cb=!? fBridge=!?
{ 0x3c, 1, 1, 3, "INTERRUPT_LINE" }, // fBridge=??
{ 0x3d, 1, 0, 3, "INTERRUPT_PIN" }, // fBridge=??
{ 0x3e, 1, 0, 1, "MIN_GNT" }, // fWritable = !?
{ 0x3e, 1, 1, 2, "BRIDGE_CONTROL" }, // fWritable = !? cb=!?
{ 0x3f, 1, 1, 3, "MAX_LAT" }, // fWritable = !? fBridge=!?
};
uint8_t const fBridge = fIsBridge ? 2 : 1;
uint8_t *pbDstConfig = &pDev->config[0];
for (uint32_t i = 0; i < RT_ELEMENTS(s_aFields); i++)
if (s_aFields[i].fBridge & fBridge)
{
uint8_t const off = s_aFields[i].off;
uint8_t const cb = s_aFields[i].cb;
uint32_t u32Src;
uint32_t u32Dst;
switch (cb)
{
case 1:
u32Src = pbSrcConfig[off];
u32Dst = pbDstConfig[off];
break;
case 2:
u32Src = *(uint16_t const *)&pbSrcConfig[off];
u32Dst = *(uint16_t const *)&pbDstConfig[off];
break;
case 4:
u32Src = *(uint32_t const *)&pbSrcConfig[off];
u32Dst = *(uint32_t const *)&pbDstConfig[off];
break;
default:
AssertFailed();
continue;
}
if (u32Src != u32Dst)
{
if (!s_aFields[i].fWritable)
LogRel(("PCI: %8s/%u: %2u-bit field %s: %x -> %x - !READ ONLY!\n",
pDev->name, pDev->pDevIns->iInstance, cb*8, s_aFields[i].pszName, u32Dst, u32Src));
else
LogRel(("PCI: %8s/%u: %2u-bit field %s: %x -> %x\n",
pDev->name, pDev->pDevIns->iInstance, cb*8, s_aFields[i].pszName, u32Dst, u32Src));
pDev->Int.s.pfnConfigWrite(pDev, off, u32Src, cb);
}
}
}
/**
* Loads a saved PCI device state.
*
* @returns VBox status code.
* @param pDevIns The device instance.
* @param pSSMHandle The handle to the saved state.
* @param u32Version The data unit version number.
*/
static DECLCALLBACK(int) pciLoadExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSMHandle, uint32_t u32Version)
{
PPCIGLOBALS pThis = PDMINS_2_DATA(pDevIns, PPCIGLOBALS);
PPCIBUS pBus = &pThis->PciBus;
uint32_t u32;
uint32_t i;
int rc;
/*
* Check the version.
*/
if (u32Version > VBOX_PCI_SAVED_STATE_VERSION)
{
AssertFailed();
return VERR_SSM_UNSUPPORTED_DATA_UNIT_VERSION;
}
/*
* Bus state data.
*/
SSMR3GetU32(pSSMHandle, &pThis->uConfigReg);
if (u32Version > 1)
SSMR3GetBool(pSSMHandle, &pThis->fUseIoApic);
/* Load IRQ states. */
if (u32Version > 2)
{
for (uint8_t i = 0; i < PCI_IRQ_PINS; i++)
SSMR3GetU32(pSSMHandle, (uint32_t *)&pThis->pci_irq_levels[i]);
for (uint8_t i = 0; i < PCI_APIC_IRQ_PINS; i++)
SSMR3GetU32(pSSMHandle, (uint32_t *)&pThis->pci_apic_irq_levels[i]);
SSMR3GetU32(pSSMHandle, &pThis->acpi_irq_level);
SSMR3GetS32(pSSMHandle, &pThis->acpi_irq);
}
/* separator */
rc = SSMR3GetU32(pSSMHandle, &u32);
if (RT_FAILURE(rc))
return rc;
if (u32 != (uint32_t)~0)
AssertMsgFailedReturn(("u32=%#x\n", u32), rc);
/*
* Iterate all the devices.
*/
for (i = 0;; i++)
{
PCIDEVICE DevTmp;
PPCIDEVICE pDev;
/* index / terminator */
rc = SSMR3GetU32(pSSMHandle, &u32);
if (RT_FAILURE(rc))
return rc;
if (u32 == (uint32_t)~0)
break;
if ( u32 >= RT_ELEMENTS(pBus->devices)
|| u32 < i)
{
AssertMsgFailed(("u32=%#x i=%#x\n", u32, i));
return rc;
}
/* skip forward to the device checking that no new devices are present. */
for (; i < u32; i++)
{
if (pBus->devices[i])
{
LogRel(("New device in slot %#x, %s (vendor=%#06x device=%#06x)\n", i, pBus->devices[i]->name,
PCIDevGetVendorId(pBus->devices[i]), PCIDevGetDeviceId(pBus->devices[i])));
if (SSMR3HandleGetAfter(pSSMHandle) != SSMAFTER_DEBUG_IT)
AssertFailedReturn(VERR_SSM_LOAD_CONFIG_MISMATCH);
}
}
/* Get the data */
DevTmp.Int.s.uIrqPinState = ~0; /* Invalid value in case we have an older saved state to force a state change in pciSetIrq. */
SSMR3GetMem(pSSMHandle, DevTmp.config, sizeof(DevTmp.config));
if (u32Version < 3)
{
int32_t i32Temp;
/* Irq value not needed anymore. */
rc = SSMR3GetS32(pSSMHandle, &i32Temp);
if (RT_FAILURE(rc))
return rc;
}
else
{
rc = SSMR3GetS32(pSSMHandle, &DevTmp.Int.s.uIrqPinState);
if (RT_FAILURE(rc))
return rc;
}
/* check that it's still around. */
pDev = pBus->devices[i];
if (!pDev)
{
LogRel(("Device in slot %#x has been removed! vendor=%#06x device=%#06x\n", i,
PCIDevGetVendorId(&DevTmp), PCIDevGetDeviceId(&DevTmp)));
if (SSMR3HandleGetAfter(pSSMHandle) != SSMAFTER_DEBUG_IT)
AssertFailedReturn(VERR_SSM_LOAD_CONFIG_MISMATCH);
continue;
}
/* match the vendor id assuming that this will never be changed. */
if ( DevTmp.config[0] != pDev->config[0]
|| DevTmp.config[1] != pDev->config[1])
{
LogRel(("Device in slot %#x (%s) vendor id mismatch! saved=%.4Rhxs current=%.4Rhxs\n",
i, pDev->name, DevTmp.config, pDev->config));
AssertFailedReturn(VERR_SSM_LOAD_CONFIG_MISMATCH);
}
/* commit the loaded device config. */
pciR3CommonRestoreConfig(pDev, &DevTmp.config[0], false ); /** @todo fix bridge fun! */
pDev->Int.s.uIrqPinState = DevTmp.Int.s.uIrqPinState;
}
return VINF_SUCCESS;
}
/* -=-=-=-=-=- real code -=-=-=-=-=- */
/**
* Registers the device with the specified PCI bus.
*
* @returns VBox status code.
* @param pBus The bus to register with.
* @param iDev The PCI device ordinal.
* @param pPciDev The PCI device structure.
* @param pszName Pointer to device name (permanent, readonly). For debugging, not unique.
*/
static int pciRegisterInternal(PPCIBUS pBus, int iDev, PPCIDEVICE pPciDev, const char *pszName)
{
/*
* Find device slot.
*/
if (iDev < 0)
{
/*
* Special check for the IDE controller which is our function 1 device
* before searching.
*/
if ( !strcmp(pszName, "piix3ide")
&& !pBus->devices[9])
iDev = 9;
#ifdef VBOX_WITH_LPC
/* LPC bus expected to be there by some guests, better make an additional argument to PDM
device helpers, but requires significant rewrite */
else if (!strcmp(pszName, "lpc")
&& !pBus->devices[0xf8])
iDev = 0xf8;
#endif
else
{
Assert(!(pBus->iDevSearch % 8));
for (iDev = pBus->iDevSearch; iDev < (int)RT_ELEMENTS(pBus->devices); iDev += 8)
if ( !pBus->devices[iDev]
&& !pBus->devices[iDev + 1]
&& !pBus->devices[iDev + 2]
&& !pBus->devices[iDev + 3]
&& !pBus->devices[iDev + 4]
&& !pBus->devices[iDev + 5]
&& !pBus->devices[iDev + 6]
&& !pBus->devices[iDev + 7])
break;
if (iDev >= (int)RT_ELEMENTS(pBus->devices))
{
AssertMsgFailed(("Couldn't find free spot!\n"));
return VERR_PDM_TOO_PCI_MANY_DEVICES;
}
}
pPciDev->Int.s.fRequestedDevFn = false;
}
else
{
/*
* An explicit request.
*
* If the slot is occupied we'll have to relocate the device
* currently occupying it first. This can only be done if the
* existing device wasn't explicitly assigned. Also we limit
* ourselves to function 0 devices.
*
* If you start setting devices + function in the
* config, do it for all pci devices!
*/
//AssertReleaseMsg(iDev > 8 || pBus->iBus != 0, ("iDev=%d pszName=%s\n", iDev, pszName));
if (pBus->devices[iDev])
{
int iDevRel;
AssertReleaseMsg(!(iDev % 8), ("PCI Configuration Conflict! iDev=%d pszName=%s clashes with %s\n",
iDev, pszName, pBus->devices[iDev]->name));
if ( pBus->devices[iDev]->Int.s.fRequestedDevFn
|| (pBus->devices[iDev + 1] && pBus->devices[iDev + 1]->Int.s.fRequestedDevFn)
|| (pBus->devices[iDev + 2] && pBus->devices[iDev + 2]->Int.s.fRequestedDevFn)
|| (pBus->devices[iDev + 3] && pBus->devices[iDev + 3]->Int.s.fRequestedDevFn)
|| (pBus->devices[iDev + 4] && pBus->devices[iDev + 4]->Int.s.fRequestedDevFn)
|| (pBus->devices[iDev + 5] && pBus->devices[iDev + 5]->Int.s.fRequestedDevFn)
|| (pBus->devices[iDev + 6] && pBus->devices[iDev + 6]->Int.s.fRequestedDevFn)
|| (pBus->devices[iDev + 7] && pBus->devices[iDev + 7]->Int.s.fRequestedDevFn))
{
AssertReleaseMsgFailed(("Configuration error:'%s' and '%s' are both configured as device %d\n",
pszName, pBus->devices[iDev]->name, iDev));
return VERR_INTERNAL_ERROR;
}
/* Find free slot for the device(s) we're moving and move them. */
for (iDevRel = pBus->iDevSearch; iDevRel < (int)RT_ELEMENTS(pBus->devices); iDevRel += 8)
{
if ( !pBus->devices[iDevRel]
&& !pBus->devices[iDevRel + 1]
&& !pBus->devices[iDevRel + 2]
&& !pBus->devices[iDevRel + 3]
&& !pBus->devices[iDevRel + 4]
&& !pBus->devices[iDevRel + 5]
&& !pBus->devices[iDevRel + 6]
&& !pBus->devices[iDevRel + 7])
{
int i = 0;
for (i = 0; i < 8; i++)
{
if (!pBus->devices[iDev + i])
continue;
Log(("PCI: relocating '%s' from slot %#x to %#x\n", pBus->devices[iDev + i]->name, iDev + i, iDevRel + i));
pBus->devices[iDevRel + i] = pBus->devices[iDev + i];
pBus->devices[iDevRel + i]->devfn = i;
pBus->devices[iDev + i] = NULL;
}
}
}
if (pBus->devices[iDev])
{
AssertMsgFailed(("Couldn't find free spot!\n"));
return VERR_PDM_TOO_PCI_MANY_DEVICES;
}
} /* if conflict */
pPciDev->Int.s.fRequestedDevFn = true;
}
Assert(!pBus->devices[iDev]);
pPciDev->devfn = iDev;
pPciDev->name = pszName;
pPciDev->Int.s.pBusR3 = pBus;
pPciDev->Int.s.pBusR0 = MMHyperR3ToR0(PDMDevHlpGetVM(pBus->CTX_SUFF(pDevIns)), pBus);
pPciDev->Int.s.pBusRC = MMHyperR3ToRC(PDMDevHlpGetVM(pBus->CTX_SUFF(pDevIns)), pBus);
pPciDev->Int.s.pfnConfigRead = pci_default_read_config;
pPciDev->Int.s.pfnConfigWrite = pci_default_write_config;
pBus->devices[iDev] = pPciDev;
if (pPciDev->Int.s.fPciToPciBridge)
{
AssertMsg(pBus->cBridges < RT_ELEMENTS(pBus->devices), ("Number of bridges exceeds the number of possible devices on the bus\n"));
AssertMsg(pPciDev->Int.s.pfnBridgeConfigRead && pPciDev->Int.s.pfnBridgeConfigWrite,
("device is a bridge but does not implement read/write functions\n"));
pBus->papBridgesR3[pBus->cBridges] = pPciDev;
pBus->cBridges++;
}
Log(("PCI: Registered device %d function %d (%#x) '%s'.\n",
iDev >> 3, iDev & 7, 0x80000000 | (iDev << 8), pszName));
return VINF_SUCCESS;
}
/**
* Registers the device with the default PCI bus.
*
* @returns VBox status code.
* @param pDevIns Device instance of the PCI Bus.
* @param pPciDev The PCI device structure.
* Any PCI enabled device must keep this in it's instance data!
* Fill in the PCI data config before registration, please.
* @param pszName Pointer to device name (permanent, readonly). For debugging, not unique.
* @param iDev The PCI device number. Use a negative value for auto assigning one.
*/
static DECLCALLBACK(int) pciRegister(PPDMDEVINS pDevIns, PPCIDEVICE pPciDev, const char *pszName, int iDev)
{
PPCIBUS pBus = DEVINS_2_PCIBUS(pDevIns);
/*
* Check input.
*/
if ( !pszName
|| !pPciDev
|| iDev >= (int)RT_ELEMENTS(pBus->devices)
|| (iDev >= 0 && iDev <= 8))
{
AssertMsgFailed(("Invalid argument! pszName=%s pPciDev=%p iDev=%d\n", pszName, pPciDev, iDev));
return VERR_INVALID_PARAMETER;
}
/*
* Register the device.
*/
return pciRegisterInternal(pBus, iDev, pPciDev, pszName);
}
static DECLCALLBACK(int) pciIORegionRegister(PPDMDEVINS pDevIns, PPCIDEVICE pPciDev, int iRegion, uint32_t cbRegion, PCIADDRESSSPACE enmType, PFNPCIIOREGIONMAP pfnCallback)
{
/*
* Validate.
*/
AssertMsgReturn( enmType == PCI_ADDRESS_SPACE_MEM
|| enmType == PCI_ADDRESS_SPACE_IO
|| enmType == PCI_ADDRESS_SPACE_MEM_PREFETCH,
("Invalid enmType=%#x? Or was this a bitmask after all...\n", enmType),
VERR_INVALID_PARAMETER);
AssertMsgReturn((unsigned)iRegion < PCI_NUM_REGIONS,
("Invalid iRegion=%d PCI_NUM_REGIONS=%d\n", iRegion, PCI_NUM_REGIONS),
VERR_INVALID_PARAMETER);
int iLastSet = ASMBitLastSetU32(cbRegion);
AssertMsgReturn( iLastSet != 0
&& RT_BIT_32(iLastSet - 1) == cbRegion,
("Invalid cbRegion=%#x iLastSet=%#x (not a power of 2 or 0)\n", cbRegion, iLastSet),
VERR_INVALID_PARAMETER);
/*
* Register the I/O region.
*/
PPCIIOREGION pRegion = &pPciDev->Int.s.aIORegions[iRegion];
pRegion->addr = ~0U;
pRegion->size = cbRegion;
pRegion->type = enmType;
pRegion->map_func = pfnCallback;
/* Set type in the config space. */
uint32_t u32Address = 0x10 + iRegion * 4;
uint32_t u32Value = (enmType == PCI_ADDRESS_SPACE_MEM_PREFETCH ? (1 << 3) : 0)
| (enmType == PCI_ADDRESS_SPACE_IO ? 1 : 0);
*(uint32_t *)(pPciDev->config + u32Address) = RT_H2LE_U32(u32Value);
return VINF_SUCCESS;
}
/**
* @copydoc PDMPCIBUSREG::pfnSetConfigCallbacksR3
*/
static DECLCALLBACK(void) pciSetConfigCallbacks(PPDMDEVINS pDevIns, PPCIDEVICE pPciDev, PFNPCICONFIGREAD pfnRead, PPFNPCICONFIGREAD ppfnReadOld,
PFNPCICONFIGWRITE pfnWrite, PPFNPCICONFIGWRITE ppfnWriteOld)
{
if (ppfnReadOld)
*ppfnReadOld = pPciDev->Int.s.pfnConfigRead;
pPciDev->Int.s.pfnConfigRead = pfnRead;
if (ppfnWriteOld)
*ppfnWriteOld = pPciDev->Int.s.pfnConfigWrite;
pPciDev->Int.s.pfnConfigWrite = pfnWrite;
}
/**
* Called to perform the job of the bios.
*
* @returns VBox status.
* @param pDevIns Device instance of the first bus.
*/
static DECLCALLBACK(int) pciFakePCIBIOS(PPDMDEVINS pDevIns)
{
int rc;
unsigned i;
uint8_t elcr[2] = {0, 0};
PPCIGLOBALS pGlobals = PDMINS_2_DATA(pDevIns, PPCIGLOBALS);
PVM pVM = PDMDevHlpGetVM(pDevIns);
Assert(pVM);
/*
* Set the start addresses.
*/
pGlobals->pci_bios_io_addr = 0xc000;
pGlobals->pci_bios_mem_addr = UINT32_C(0xf0000000);
pGlobals->uBus = 0;
/*
* Activate IRQ mappings.
*/
for (i = 0; i < 4; i++)
{
uint8_t irq = pci_irqs[i];
/* Set to trigger level. */
elcr[irq >> 3] |= (1 << (irq & 7));
/* Activate irq remapping in PIIX3. */
pci_config_writeb(pGlobals, 0, pGlobals->PIIX3State.dev.devfn, 0x60 + i, irq);
}
/* Tell to the PIC. */
rc = IOMIOPortWrite(pVM, 0x4d0, elcr[0], sizeof(uint8_t));
if (rc == VINF_SUCCESS)
rc = IOMIOPortWrite(pVM, 0x4d1, elcr[1], sizeof(uint8_t));
if (rc != VINF_SUCCESS)
{
AssertMsgFailed(("Writing to PIC failed!\n"));
return RT_SUCCESS(rc) ? VERR_INTERNAL_ERROR : rc;
}
/*
* Init the devices.
*/
for (i = 0; i < 256; i++)
{
uint8_t aBridgePositions[256];
memset(aBridgePositions, 0, sizeof(aBridgePositions));
Log2(("PCI: Initializing device %d (%#x)\n",
i, 0x80000000 | (i << 8)));
pci_bios_init_device(pGlobals, 0, i, 0, aBridgePositions);
}
return VINF_SUCCESS;
}
/**
* @copydoc FNPDMDEVRELOCATE
*/
static DECLCALLBACK(void) pciRelocate(PPDMDEVINS pDevIns, RTGCINTPTR offDelta)
{
PPCIGLOBALS pGlobals = PDMINS_2_DATA(pDevIns, PPCIGLOBALS);
PPCIBUS pBus = &pGlobals->PciBus;
pGlobals->pDevInsRC = PDMDEVINS_2_RCPTR(pDevIns);
pBus->pPciHlpRC = pBus->pPciHlpR3->pfnGetRCHelpers(pDevIns);
pBus->pDevInsRC = PDMDEVINS_2_RCPTR(pDevIns);
/* Relocate RC pointers for the attached pci devices. */
for (uint32_t i = 0; i < RT_ELEMENTS(pBus->devices); i++)
{
if (pBus->devices[i])
pBus->devices[i]->Int.s.pBusRC += offDelta;
}
}
/**
* Construct a host to PCI Bus device instance for a VM.
*
* @returns VBox status.
* @param pDevIns The device instance data.
* If the registration structure is needed, pDevIns->pDevReg points to it.
* @param iInstance Instance number. Use this to figure out which registers and such to use.
* The device number is also found in pDevIns->iInstance, but since it's
* likely to be freqently used PDM passes it as parameter.
* @param pCfgHandle Configuration node handle for the device. Use this to obtain the configuration
* of the device instance. It's also found in pDevIns->pCfgHandle, but like
* iInstance it's expected to be used a bit in this function.
*/
static DECLCALLBACK(int) pciConstruct(PPDMDEVINS pDevIns, int iInstance, PCFGMNODE pCfgHandle)
{
int rc;
Assert(iInstance == 0);
/*
* Validate and read configuration.
*/
if (!CFGMR3AreValuesValid(pCfgHandle, "IOAPIC\0" "GCEnabled\0" "R0Enabled\0"))
return VERR_PDM_DEVINS_UNKNOWN_CFG_VALUES;
/* query whether we got an IOAPIC */
bool fUseIoApic;
rc = CFGMR3QueryBoolDef(pCfgHandle, "IOAPIC", &fUseIoApic, false);
if (RT_FAILURE(rc))
return PDMDEV_SET_ERROR(pDevIns, rc,
N_("Configuration error: Failed to query boolean value \"IOAPIC\""));
/* check if RC code is enabled. */
bool fGCEnabled;
rc = CFGMR3QueryBoolDef(pCfgHandle, "GCEnabled", &fGCEnabled, true);
if (RT_FAILURE(rc))
return PDMDEV_SET_ERROR(pDevIns, rc,
N_("Configuration error: Failed to query boolean value \"GCEnabled\""));
/* check if R0 code is enabled. */
bool fR0Enabled;
rc = CFGMR3QueryBoolDef(pCfgHandle, "R0Enabled", &fR0Enabled, true);
if (RT_FAILURE(rc))
return PDMDEV_SET_ERROR(pDevIns, rc,
N_("Configuration error: Failed to query boolean value \"R0Enabled\""));
Log(("PCI: fUseIoApic=%RTbool fGCEnabled=%RTbool fR0Enabled=%RTbool\n", fUseIoApic, fGCEnabled, fR0Enabled));
/*
* Init data and register the PCI bus.
*/
PPCIGLOBALS pGlobals = PDMINS_2_DATA(pDevIns, PPCIGLOBALS);
pGlobals->pci_bios_io_addr = 0xc000;
pGlobals->pci_bios_mem_addr = 0xf0000000;
memset((void *)&pGlobals->pci_irq_levels, 0, sizeof(pGlobals->pci_irq_levels));
pGlobals->fUseIoApic = fUseIoApic;
memset((void *)&pGlobals->pci_apic_irq_levels, 0, sizeof(pGlobals->pci_apic_irq_levels));
pGlobals->pDevInsR3 = pDevIns;
pGlobals->pDevInsR0 = PDMDEVINS_2_R0PTR(pDevIns);
pGlobals->pDevInsRC = PDMDEVINS_2_RCPTR(pDevIns);
pGlobals->PciBus.pDevInsR3 = pDevIns;
pGlobals->PciBus.pDevInsR0 = PDMDEVINS_2_R0PTR(pDevIns);
pGlobals->PciBus.pDevInsRC = PDMDEVINS_2_RCPTR(pDevIns);
pGlobals->PciBus.papBridgesR3 = (PPCIDEVICE *)PDMDevHlpMMHeapAllocZ(pDevIns, sizeof(PPCIDEVICE) * RT_ELEMENTS(pGlobals->PciBus.devices));
PDMPCIBUSREG PciBusReg;
PPCIBUS pBus = &pGlobals->PciBus;
PciBusReg.u32Version = PDM_PCIBUSREG_VERSION;
PciBusReg.pfnRegisterR3 = pciRegister;
PciBusReg.pfnIORegionRegisterR3 = pciIORegionRegister;
PciBusReg.pfnSetConfigCallbacksR3 = pciSetConfigCallbacks;
PciBusReg.pfnSetIrqR3 = pciSetIrq;
PciBusReg.pfnSaveExecR3 = pciGenericSaveExec;
PciBusReg.pfnLoadExecR3 = pciGenericLoadExec;
PciBusReg.pfnFakePCIBIOSR3 = pciFakePCIBIOS;
PciBusReg.pszSetIrqRC = fGCEnabled ? "pciSetIrq" : NULL;
PciBusReg.pszSetIrqR0 = fR0Enabled ? "pciSetIrq" : NULL;
rc = pDevIns->pDevHlpR3->pfnPCIBusRegister(pDevIns, &PciBusReg, &pBus->pPciHlpR3);
if (RT_FAILURE(rc))
return PDMDEV_SET_ERROR(pDevIns, rc,
N_("Failed to register ourselves as a PCI Bus"));
if (pBus->pPciHlpR3->u32Version != PDM_PCIHLPR3_VERSION)
return PDMDevHlpVMSetError(pDevIns, VERR_VERSION_MISMATCH, RT_SRC_POS,
N_("PCI helper version mismatch; got %#x expected %#x"),
pBus->pPciHlpR3->u32Version != PDM_PCIHLPR3_VERSION);
pBus->pPciHlpRC = pBus->pPciHlpR3->pfnGetRCHelpers(pDevIns);
pBus->pPciHlpR0 = pBus->pPciHlpR3->pfnGetR0Helpers(pDevIns);
/*
* Fill in PCI configs and add them to the bus.
*/
/* i440FX */
PCIDevSetVendorId( &pBus->PciDev, 0x8086); /* Intel */
PCIDevSetDeviceId( &pBus->PciDev, 0x1237);
PCIDevSetRevisionId(&pBus->PciDev, 0x02);
PCIDevSetClassSub( &pBus->PciDev, 0x00); /* host2pci */
PCIDevSetClassBase( &pBus->PciDev, 0x06); /* PCI_bridge */
PCIDevSetHeaderType(&pBus->PciDev, 0x00);
pBus->PciDev.pDevIns = pDevIns;
pBus->PciDev.Int.s.fRequestedDevFn= true;
pciRegisterInternal(pBus, 0, &pBus->PciDev, "i440FX");
/* PIIX3 */
PCIDevSetVendorId( &pGlobals->PIIX3State.dev, 0x8086); /* Intel */
PCIDevSetDeviceId( &pGlobals->PIIX3State.dev, 0x7000); /* 82371SB PIIX3 PCI-to-ISA bridge (Step A1) */
PCIDevSetClassSub( &pGlobals->PIIX3State.dev, 0x01); /* PCI_ISA */
PCIDevSetClassBase( &pGlobals->PIIX3State.dev, 0x06); /* PCI_bridge */
PCIDevSetHeaderType(&pGlobals->PIIX3State.dev, 0x80); /* PCI_multifunction, generic */
pGlobals->PIIX3State.dev.pDevIns = pDevIns;
pGlobals->PIIX3State.dev.Int.s.fRequestedDevFn= true;
pciRegisterInternal(pBus, 8, &pGlobals->PIIX3State.dev, "PIIX3");
piix3_reset(&pGlobals->PIIX3State);
pBus->iDevSearch = 16;
/*
* Register I/O ports and save state.
*/
rc = PDMDevHlpIOPortRegister(pDevIns, 0x0cf8, 1, NULL, pciIOPortAddressWrite, pciIOPortAddressRead, NULL, NULL, "i440FX (PCI)");
if (RT_FAILURE(rc))
return rc;
rc = PDMDevHlpIOPortRegister(pDevIns, 0x0cfc, 4, NULL, pciIOPortDataWrite, pciIOPortDataRead, NULL, NULL, "i440FX (PCI)");
if (RT_FAILURE(rc))
return rc;
if (fGCEnabled)
{
rc = PDMDevHlpIOPortRegisterGC(pDevIns, 0x0cf8, 1, NIL_RTGCPTR, "pciIOPortAddressWrite", "pciIOPortAddressRead", NULL, NULL, "i440FX (PCI)");
if (RT_FAILURE(rc))
return rc;
rc = PDMDevHlpIOPortRegisterGC(pDevIns, 0x0cfc, 4, NIL_RTGCPTR, "pciIOPortDataWrite", "pciIOPortDataRead", NULL, NULL, "i440FX (PCI)");
if (RT_FAILURE(rc))
return rc;
}
if (fR0Enabled)
{
rc = PDMDevHlpIOPortRegisterR0(pDevIns, 0x0cf8, 1, NIL_RTR0PTR, "pciIOPortAddressWrite", "pciIOPortAddressRead", NULL, NULL, "i440FX (PCI)");
if (RT_FAILURE(rc))
return rc;
rc = PDMDevHlpIOPortRegisterR0(pDevIns, 0x0cfc, 4, NIL_RTR0PTR, "pciIOPortDataWrite", "pciIOPortDataRead", NULL, NULL, "i440FX (PCI)");
if (RT_FAILURE(rc))
return rc;
}
rc = SSMR3RegisterDevice(PDMDevHlpGetVM(pDevIns), pDevIns, "pci", iInstance, VBOX_PCI_SAVED_STATE_VERSION, sizeof(*pBus) + 16*128, "pgm",
NULL, pciSaveExec, NULL, NULL, pciLoadExec, NULL);
if (RT_FAILURE(rc))
return rc;
return VINF_SUCCESS;
}
/**
* The device registration structure.
*/
const PDMDEVREG g_DevicePCI =
{
/* u32Version */
PDM_DEVREG_VERSION,
/* szDeviceName */
"pci",
/* szRCMod */
"VBoxDDGC.gc",
/* szR0Mod */
"VBoxDDR0.r0",
/* pszDescription */
"i440FX PCI bridge and PIIX3 ISA bridge.",
/* fFlags */
PDM_DEVREG_FLAGS_DEFAULT_BITS | PDM_DEVREG_FLAGS_RC | PDM_DEVREG_FLAGS_R0,
/* fClass */
PDM_DEVREG_CLASS_BUS_PCI | PDM_DEVREG_CLASS_BUS_ISA,
/* cMaxInstances */
1,
/* cbInstance */
sizeof(PCIGLOBALS),
/* pfnConstruct */
pciConstruct,
/* pfnDestruct */
NULL,
/* pfnRelocate */
pciRelocate,
/* pfnIOCtl */
NULL,
/* pfnPowerOn */
NULL,
/* pfnReset */
NULL,
/* pfnSuspend */
NULL,
/* pfnResume */
NULL,
/* pfnAttach */
NULL,
/* pfnDetach */
NULL,
/* pfnQueryInterface */
NULL,
/* pfnInitComplete */
NULL,
/* pfnPowerOff */
NULL,
/* pfnSoftReset */
NULL,
/* u32VersionEnd */
PDM_DEVREG_VERSION
};
#endif /* IN_RING3 */
/**
* Set the IRQ for a PCI device on a secondary bus.
*
* @param pDevIns Device instance of the PCI Bus.
* @param pPciDev The PCI device structure.
* @param iIrq IRQ number to set.
* @param iLevel IRQ level.
*/
PDMBOTHCBDECL(void) pcibridgeSetIrq(PPDMDEVINS pDevIns, PPCIDEVICE pPciDev, int iIrq, int iLevel)
{
/*
* The PCI-to-PCI bridge specification defines how the interrupt pins
* are routed from the secondary to the primary bus (see chapter 9).
* iIrq gives the interrupt pin the pci device asserted.
* We change iIrq here according to the spec and call the SetIrq function
* of our parent passing the device which asserted the interrupt instead of the device of the bridge.
*/
PPCIBUS pBus = PDMINS_2_DATA(pDevIns, PPCIBUS);
int iIrqPinBridge = 0;
uint8_t uDevFnBridge = pPciDev->devfn;
/* Walk the chain until we reach the host bus. */
while (pBus->iBus != 0)
{
uDevFnBridge = pBus->PciDev.devfn;
iIrqPinBridge = ((uDevFnBridge >> 3) + iIrqPinBridge) & 3;
/* Get the parent. */
pBus = pBus->PciDev.Int.s.CTX_SUFF(pBus);
}
AssertMsg(pBus->iBus == 0, ("This is not the host pci bus iBus=%d\n", pBus->iBus));
pciSetIrqInternal(PCIBUS_2_PCIGLOBALS(pBus), uDevFnBridge, pPciDev, iIrqPinBridge, iLevel);
}
#ifdef IN_RING3
static void pcibridgeConfigWrite(PPDMDEVINSR3 pDevIns, uint8_t iBus, uint8_t iDevice, uint32_t u32Address, uint32_t u32Value, unsigned cb)
{
PPCIBUS pBus = PDMINS_2_DATA(pDevIns, PPCIBUS);
LogFlowFunc((": pDevIns=%p iBus=%d iDevice=%d u32Address=%u u32Value=%u cb=%d\n", pDevIns, iBus, iDevice, u32Address, u32Value, cb));
/* If the current bus is not the target bus search for the bus which contains the device. */
if (iBus != pBus->PciDev.config[VBOX_PCI_SECONDARY_BUS])
{
PPCIDEVICE pBridgeDevice = pciFindBridge(pBus, iBus);
if (pBridgeDevice)
{
AssertPtr(pBridgeDevice->Int.s.pfnBridgeConfigWrite);
pBridgeDevice->Int.s.pfnBridgeConfigWrite(pBridgeDevice->pDevIns, iBus, iDevice, u32Address, u32Value, cb);
}
}
else
{
/* This is the target bus, pass the write to the device. */
PPCIDEVICE pPciDev = pBus->devices[iDevice];
if (pPciDev)
{
Log(("%s: %s: addr=%02x val=%08x len=%d\n", __FUNCTION__, pPciDev->name, u32Address, u32Value, cb));
pPciDev->Int.s.pfnConfigWrite(pPciDev, u32Address, u32Value, cb);
}
}
}
static uint32_t pcibridgeConfigRead(PPDMDEVINSR3 pDevIns, uint8_t iBus, uint8_t iDevice, uint32_t u32Address, unsigned cb)
{
PPCIBUS pBus = PDMINS_2_DATA(pDevIns, PPCIBUS);
uint32_t u32Value = 0xffffffff; /* Return value in case there is no device. */
LogFlowFunc((": pDevIns=%p iBus=%d iDevice=%d u32Address=%u cb=%d\n", pDevIns, iBus, iDevice, u32Address, cb));
/* If the current bus is not the target bus search for the bus which contains the device. */
if (iBus != pBus->PciDev.config[VBOX_PCI_SECONDARY_BUS])
{
PPCIDEVICE pBridgeDevice = pciFindBridge(pBus, iBus);
if (pBridgeDevice)
{
AssertPtr( pBridgeDevice->Int.s.pfnBridgeConfigRead);
u32Value = pBridgeDevice->Int.s.pfnBridgeConfigRead(pBridgeDevice->pDevIns, iBus, iDevice, u32Address, cb);
}
}
else
{
/* This is the target bus, pass the read to the device. */
PPCIDEVICE pPciDev = pBus->devices[iDevice];
if (pPciDev)
{
u32Value = pPciDev->Int.s.pfnConfigRead(pPciDev, u32Address, cb);
Log(("%s: %s: u32Address=%02x u32Value=%08x cb=%d\n", __FUNCTION__, pPciDev->name, u32Address, u32Value, cb));
}
}
return u32Value;
}
/**
* Saves a state of a PCI bridge device.
*
* @returns VBox status code.
* @param pDevIns The device instance.
* @param pPciDev Pointer to PCI device.
* @param pSSMHandle The handle to save the state to.
*/
static DECLCALLBACK(int) pcibridgeSaveExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSMHandle)
{
uint32_t i;
PPCIBUS pThis = PDMINS_2_DATA(pDevIns, PPCIBUS);
/*
* Iterate all the devices.
*/
for (i = 0; i < RT_ELEMENTS(pThis->devices); i++)
{
PPCIDEVICE pDev = pThis->devices[i];
if (pDev)
{
int rc;
SSMR3PutU32(pSSMHandle, i);
SSMR3PutMem(pSSMHandle, pDev->config, sizeof(pDev->config));
rc = SSMR3PutS32(pSSMHandle, pDev->Int.s.uIrqPinState);
if (RT_FAILURE(rc))
return rc;
}
}
return SSMR3PutU32(pSSMHandle, ~0); /* terminator */
}
/**
* Loads a saved PCI bridge device state.
*
* @returns VBox status code.
* @param pDevIns The device instance.
* @param pSSMHandle The handle to the saved state.
* @param u32Version The data unit version number.
*/
static DECLCALLBACK(int) pcibridgeLoadExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSMHandle, uint32_t u32Version)
{
PPCIBUS pBus = PDMINS_2_DATA(pDevIns, PPCIBUS);
uint32_t u32;
uint32_t i;
int rc;
/** @todo r=bird: this is a copy of pciLoadExec. combine the two! */
/*
* Check the version.
*/
if (u32Version > VBOX_PCI_SAVED_STATE_VERSION)
{
AssertFailed();
return VERR_SSM_UNSUPPORTED_DATA_UNIT_VERSION;
}
/*
* Iterate all the devices.
*/
for (i = 0;; i++)
{
PCIDEVICE DevTmp;
PPCIDEVICE pDev;
/* index / terminator */
rc = SSMR3GetU32(pSSMHandle, &u32);
if (RT_FAILURE(rc))
return rc;
if (u32 == (uint32_t)~0)
break;
if ( u32 >= RT_ELEMENTS(pBus->devices)
|| u32 < i)
{
AssertMsgFailed(("u32=%#x i=%#x\n", u32, i));
return rc;
}
/* skip forward to the device checking that no new devices are present. */
for (; i < u32; i++)
{
if (pBus->devices[i])
{
LogRel(("New device in slot %#x, %s (vendor=%#06x device=%#06x)\n", i, pBus->devices[i]->name,
PCIDevGetVendorId(pBus->devices[i]), PCIDevGetDeviceId(pBus->devices[i])));
if (SSMR3HandleGetAfter(pSSMHandle) != SSMAFTER_DEBUG_IT)
AssertFailedReturn(VERR_SSM_LOAD_CONFIG_MISMATCH);
}
}
/* get the data */
DevTmp.Int.s.uIrqPinState = 0;
SSMR3GetMem(pSSMHandle, DevTmp.config, sizeof(DevTmp.config));
rc = SSMR3GetS32(pSSMHandle, &DevTmp.Int.s.uIrqPinState);
if (RT_FAILURE(rc))
return rc;
/* check that it's still around. */
pDev = pBus->devices[i];
if (!pDev)
{
LogRel(("Device in slot %#x has been removed! vendor=%#06x device=%#06x\n", i,
PCIDevGetVendorId(&DevTmp), PCIDevGetDeviceId(&DevTmp)));
if (SSMR3HandleGetAfter(pSSMHandle) != SSMAFTER_DEBUG_IT)
AssertFailedReturn(VERR_SSM_LOAD_CONFIG_MISMATCH);
continue;
}
/* match the vendor id assuming that this will never be changed. */
if ( DevTmp.config[0] != pDev->config[0]
|| DevTmp.config[1] != pDev->config[1])
{
LogRel(("Device in slot %#x (%s) vendor id mismatch! saved=%.4Rhxs current=%.4Rhxs\n",
i, pDev->name, DevTmp.config, pDev->config));
AssertFailedReturn(VERR_SSM_LOAD_CONFIG_MISMATCH);
}
/* commit the loaded device config. */
pciR3CommonRestoreConfig(pDev, &DevTmp.config[0], false ); /** @todo fix bridge fun! */
pDev->Int.s.uIrqPinState = DevTmp.Int.s.uIrqPinState;
}
return VINF_SUCCESS;
}
/**
* @copydoc FNPDMDEVRESET
*/
static DECLCALLBACK(void) pcibridgeReset(PPDMDEVINS pDevIns)
{
PPCIBUS pBus = PDMINS_2_DATA(pDevIns, PPCIBUS);
/* Reset config space to default values. */
pBus->PciDev.config[VBOX_PCI_PRIMARY_BUS] = 0;
pBus->PciDev.config[VBOX_PCI_SECONDARY_BUS] = 0;
pBus->PciDev.config[VBOX_PCI_SUBORDINATE_BUS] = 0;
}
/**
* @copydoc FNPDMDEVRELOCATE
*/
static DECLCALLBACK(void) pcibridgeRelocate(PPDMDEVINS pDevIns, RTGCINTPTR offDelta)
{
PPCIBUS pBus = PDMINS_2_DATA(pDevIns, PPCIBUS);
pBus->pDevInsRC = PDMDEVINS_2_RCPTR(pDevIns);
/* Relocate RC pointers for the attached pci devices. */
for (uint32_t i = 0; i < RT_ELEMENTS(pBus->devices); i++)
{
if (pBus->devices[i])
pBus->devices[i]->Int.s.pBusRC += offDelta;
}
}
/**
* Registers the device with the default PCI bus.
*
* @returns VBox status code.
* @param pDevIns Device instance of the PCI Bus.
* @param pPciDev The PCI device structure.
* Any PCI enabled device must keep this in it's instance data!
* Fill in the PCI data config before registration, please.
* @param pszName Pointer to device name (permanent, readonly). For debugging, not unique.
* @param iDev The PCI device number. Use a negative value for auto assigning one.
*/
static DECLCALLBACK(int) pcibridgeRegister(PPDMDEVINS pDevIns, PPCIDEVICE pPciDev, const char *pszName, int iDev)
{
PPCIBUS pBus = PDMINS_2_DATA(pDevIns, PPCIBUS);
/*
* Check input.
*/
if ( !pszName
|| !pPciDev
|| iDev >= (int)RT_ELEMENTS(pBus->devices))
{
AssertMsgFailed(("Invalid argument! pszName=%s pPciDev=%p iDev=%d\n", pszName, pPciDev, iDev));
return VERR_INVALID_PARAMETER;
}
/*
* Register the device.
*/
return pciRegisterInternal(pBus, iDev, pPciDev, pszName);
}
/**
* Construct a PCI bridge device instance for a VM.
*
* @returns VBox status.
* @param pDevIns The device instance data.
* If the registration structure is needed, pDevIns->pDevReg points to it.
* @param iInstance Instance number. Use this to figure out which registers and such to use.
* The device number is also found in pDevIns->iInstance, but since it's
* likely to be freqently used PDM passes it as parameter.
* @param pCfgHandle Configuration node handle for the device. Use this to obtain the configuration
* of the device instance. It's also found in pDevIns->pCfgHandle, but like
* iInstance it's expected to be used a bit in this function.
*/
static DECLCALLBACK(int) pcibridgeConstruct(PPDMDEVINS pDevIns, int iInstance, PCFGMNODE pCfgHandle)
{
int rc;
/*
* Validate and read configuration.
*/
if (!CFGMR3AreValuesValid(pCfgHandle, "GCEnabled\0" "R0Enabled\0"))
return VERR_PDM_DEVINS_UNKNOWN_CFG_VALUES;
/* check if RC code is enabled. */
bool fGCEnabled;
rc = CFGMR3QueryBoolDef(pCfgHandle, "GCEnabled", &fGCEnabled, true);
if (RT_FAILURE(rc))
return PDMDEV_SET_ERROR(pDevIns, rc,
N_("Configuration error: Failed to query boolean value \"GCEnabled\""));
/* check if R0 code is enabled. */
bool fR0Enabled;
rc = CFGMR3QueryBoolDef(pCfgHandle, "R0Enabled", &fR0Enabled, true);
if (RT_FAILURE(rc))
return PDMDEV_SET_ERROR(pDevIns, rc,
N_("Configuration error: Failed to query boolean value \"R0Enabled\""));
Log(("PCI: fGCEnabled=%RTbool fR0Enabled=%RTbool\n", fGCEnabled, fR0Enabled));
/*
* Init data and register the PCI bus.
*/
PPCIBUS pBus = PDMINS_2_DATA(pDevIns, PPCIBUS);
pBus->pDevInsR3 = pDevIns;
pBus->pDevInsR0 = PDMDEVINS_2_R0PTR(pDevIns);
pBus->pDevInsRC = PDMDEVINS_2_RCPTR(pDevIns);
pBus->papBridgesR3 = (PPCIDEVICE *)PDMDevHlpMMHeapAllocZ(pDevIns, sizeof(PPCIDEVICE) * RT_ELEMENTS(pBus->devices));
PDMPCIBUSREG PciBusReg;
PciBusReg.u32Version = PDM_PCIBUSREG_VERSION;
PciBusReg.pfnRegisterR3 = pcibridgeRegister;
PciBusReg.pfnIORegionRegisterR3 = pciIORegionRegister;
PciBusReg.pfnSetConfigCallbacksR3 = pciSetConfigCallbacks;
PciBusReg.pfnSetIrqR3 = pcibridgeSetIrq;
PciBusReg.pfnSaveExecR3 = pciGenericSaveExec;
PciBusReg.pfnLoadExecR3 = pciGenericLoadExec;
PciBusReg.pfnFakePCIBIOSR3 = NULL; /* Only needed for the first bus. */
PciBusReg.pszSetIrqRC = fGCEnabled ? "pcibridgeSetIrq" : NULL;
PciBusReg.pszSetIrqR0 = fR0Enabled ? "pcibridgeSetIrq" : NULL;
rc = pDevIns->pDevHlpR3->pfnPCIBusRegister(pDevIns, &PciBusReg, &pBus->pPciHlpR3);
if (RT_FAILURE(rc))
return PDMDEV_SET_ERROR(pDevIns, rc,
N_("Failed to register ourselves as a PCI Bus"));
if (pBus->pPciHlpR3->u32Version != PDM_PCIHLPR3_VERSION)
return PDMDevHlpVMSetError(pDevIns, VERR_VERSION_MISMATCH, RT_SRC_POS,
N_("PCI helper version mismatch; got %#x expected %#x"),
pBus->pPciHlpR3->u32Version, PDM_PCIHLPR3_VERSION);
pBus->pPciHlpRC = pBus->pPciHlpR3->pfnGetRCHelpers(pDevIns);
pBus->pPciHlpR0 = pBus->pPciHlpR3->pfnGetR0Helpers(pDevIns);
/*
* Fill in PCI configs and add them to the bus.
*/
PCIDevSetVendorId( &pBus->PciDev, 0x8086); /* Intel */
PCIDevSetDeviceId( &pBus->PciDev, 0x2448); /* 82801 Mobile PCI bridge. */
PCIDevSetRevisionId(&pBus->PciDev, 0xf2);
PCIDevSetClassSub( &pBus->PciDev, 0x04); /* pci2pci */
PCIDevSetClassBase( &pBus->PciDev, 0x06); /* PCI_bridge */
PCIDevSetClassProg( &pBus->PciDev, 0x01); /* Supports subtractive decoding. */
PCIDevSetHeaderType(&pBus->PciDev, 0x01); /* Single function device which adheres to the PCI-to-PCI bridge spec. */
PCIDevSetCommand( &pBus->PciDev, 0x00);
PCIDevSetStatus( &pBus->PciDev, 0x20); /* 66MHz Capable. */
PCIDevSetInterruptLine(&pBus->PciDev, 0x00); /* This device does not assert interrupts. */
/*
* This device does not generate interrupts. Interrupt delivery from
* devices attached to the bus is unaffected.
*/
PCIDevSetInterruptPin (&pBus->PciDev, 0x00);
pBus->PciDev.pDevIns = pDevIns;
pBus->PciDev.Int.s.fPciToPciBridge = true;
pBus->PciDev.Int.s.pfnBridgeConfigRead = pcibridgeConfigRead;
pBus->PciDev.Int.s.pfnBridgeConfigWrite = pcibridgeConfigWrite;
/*
* Register this PCI bridge. The called function will take care on which bus we will get registered.
*/
rc = PDMDevHlpPCIRegister (pDevIns, &pBus->PciDev);
if (RT_FAILURE(rc))
return rc;
pBus->iDevSearch = 0;
/*
* The iBus property doesn't really represent the bus number
* because the guest and the BIOS can choose different bus numbers
* for them.
* The bus number is mainly for the setIrq function to indicate
* when the host bus is reached which will have iBus = 0.
* Thathswhy the + 1.
*/
pBus->iBus = iInstance + 1;
/*
* Register SSM handlers. We use the same saved state version as for the host bridge
* to make changes easier.
*/
rc = SSMR3RegisterDevice(PDMDevHlpGetVM(pDevIns), pDevIns, "pcibridge", iInstance, VBOX_PCI_SAVED_STATE_VERSION, sizeof(*pBus) + 16*128, "pgm",
NULL, pcibridgeSaveExec, NULL, NULL, pcibridgeLoadExec, NULL);
if (RT_FAILURE(rc))
return rc;
return VINF_SUCCESS;
}
/**
* The device registration structure
* for the PCI-to-PCI bridge.
*/
const PDMDEVREG g_DevicePCIBridge =
{
/* u32Version */
PDM_DEVREG_VERSION,
/* szDeviceName */
"pcibridge",
/* szRCMod */
"VBoxDDGC.gc",
/* szR0Mod */
"VBoxDDR0.r0",
/* pszDescription */
"82801 Mobile PCI to PCI bridge",
/* fFlags */
PDM_DEVREG_FLAGS_DEFAULT_BITS | PDM_DEVREG_FLAGS_RC | PDM_DEVREG_FLAGS_R0,
/* fClass */
PDM_DEVREG_CLASS_BUS_PCI,
/* cMaxInstances */
~0,
/* cbInstance */
sizeof(PCIBUS),
/* pfnConstruct */
pcibridgeConstruct,
/* pfnDestruct */
NULL,
/* pfnRelocate */
pcibridgeRelocate,
/* pfnIOCtl */
NULL,
/* pfnPowerOn */
NULL,
/* pfnReset */
pcibridgeReset,
/* pfnSuspend */
NULL,
/* pfnResume */
NULL,
/* pfnAttach */
NULL,
/* pfnDetach */
NULL,
/* pfnQueryInterface */
NULL,
/* pfnInitComplete */
NULL,
/* pfnPowerOff */
NULL,
/* pfnSoftReset */
NULL,
/* u32VersionEnd */
PDM_DEVREG_VERSION
};
#endif /* IN_RING3 */
#endif /* !VBOX_DEVICE_STRUCT_TESTCASE */