packspu_net.c revision 4001d4f95345a4d3dd2a975a325d389d2300d010
/* Copyright (c) 2001, Stanford University
* All rights reserved
*
* See the file LICENSE.txt for information on redistributing this software.
*/
#include "cr_pack.h"
#include "cr_mem.h"
#include "cr_net.h"
#include "cr_pixeldata.h"
#include "cr_protocol.h"
#include "cr_error.h"
#include "packspu.h"
#include "packspu_proto.h"
static void
packspuWriteback( const CRMessageWriteback *wb )
{
int *writeback;
crMemcpy( &writeback, &(wb->writeback_ptr), sizeof( writeback ) );
*writeback = 0;
}
/**
* XXX Note that this routine is identical to crNetRecvReadback except
* we set *writeback=0 instead of decrementing it. Hmmm.
*/
static void
packspuReadback( const CRMessageReadback *rb, unsigned int len )
{
/* minus the header, the destination pointer,
* *and* the implicit writeback pointer at the head. */
int payload_len = len - sizeof( *rb );
int *writeback;
void *dest_ptr;
crMemcpy( &writeback, &(rb->writeback_ptr), sizeof( writeback ) );
crMemcpy( &dest_ptr, &(rb->readback_ptr), sizeof( dest_ptr ) );
*writeback = 0;
crMemcpy( dest_ptr, ((char *)rb) + sizeof(*rb), payload_len );
}
static void
packspuReadPixels( const CRMessageReadPixels *rp, unsigned int len )
{
crNetRecvReadPixels( rp, len );
--pack_spu.ReadPixels;
}
static int
packspuReceiveData( CRConnection *conn, CRMessage *msg, unsigned int len )
{
if (msg->header.type == CR_MESSAGE_REDIR_PTR)
msg = (CRMessage*) msg->redirptr.pMessage;
switch( msg->header.type )
{
case CR_MESSAGE_READ_PIXELS:
packspuReadPixels( &(msg->readPixels), len );
break;
case CR_MESSAGE_WRITEBACK:
packspuWriteback( &(msg->writeback) );
break;
case CR_MESSAGE_READBACK:
packspuReadback( &(msg->readback), len );
break;
default:
/*crWarning( "Why is the pack SPU getting a message of type 0x%x?", msg->type ); */
return 0; /* NOT HANDLED */
}
return 1; /* HANDLED */
}
static CRMessageOpcodes *
__prependHeader( CRPackBuffer *buf, unsigned int *len, unsigned int senderID )
{
int num_opcodes;
CRMessageOpcodes *hdr;
CRASSERT( buf );
CRASSERT( buf->opcode_current < buf->opcode_start );
CRASSERT( buf->opcode_current >= buf->opcode_end );
CRASSERT( buf->data_current > buf->data_start );
CRASSERT( buf->data_current <= buf->data_end );
num_opcodes = buf->opcode_start - buf->opcode_current;
hdr = (CRMessageOpcodes *)
( buf->data_start - ( ( num_opcodes + 3 ) & ~0x3 ) - sizeof(*hdr) );
CRASSERT( (void *) hdr >= buf->pack );
if (pack_spu.swap)
{
hdr->header.type = (CRMessageType) SWAP32(CR_MESSAGE_OPCODES);
hdr->numOpcodes = SWAP32(num_opcodes);
}
else
{
hdr->header.type = CR_MESSAGE_OPCODES;
hdr->numOpcodes = num_opcodes;
}
*len = buf->data_current - (unsigned char *) hdr;
return hdr;
}
/*
* This is called from either the Pack SPU and the packer library whenever
* we need to send a data buffer to the server.
*/
void packspuFlush(void *arg )
{
ThreadInfo *thread = (ThreadInfo *) arg;
ContextInfo *ctx;
unsigned int len;
CRMessageOpcodes *hdr;
CRPackBuffer *buf;
/* we should _always_ pass a valid <arg> value */
CRASSERT(thread && thread->inUse);
#ifdef CHROMIUM_THREADSAFE
CR_LOCK_PACKER_CONTEXT(thread->packer);
#endif
ctx = thread->currentContext;
buf = &(thread->buffer);
CRASSERT(buf);
/* We're done packing into the current buffer, unbind it */
crPackReleaseBuffer( thread->packer );
/*
printf("%s thread=%p thread->id = %d thread->pc=%p t2->id=%d t2->pc=%p packbuf=%p packbuf=%p\n",
__FUNCTION__, (void*) thread, (int) thread->id, thread->packer,
(int) t2->id, t2->packer,
buf->pack, thread->packer->buffer.pack);
*/
if ( buf->opcode_current == buf->opcode_start ) {
/*
printf("%s early return\n", __FUNCTION__);
*/
/* XXX these calls seem to help, but might be appropriate */
crPackSetBuffer( thread->packer, buf );
crPackResetPointers(thread->packer);
#ifdef CHROMIUM_THREADSAFE
CR_UNLOCK_PACKER_CONTEXT(thread->packer);
#endif
return;
}
hdr = __prependHeader( buf, &len, 0 );
CRASSERT( thread->netServer.conn );
if ( buf->holds_BeginEnd )
{
/*crDebug("crNetBarf %d, (%d)", len, buf->size);*/
crNetBarf( thread->netServer.conn, &(buf->pack), hdr, len );
}
else
{
/*crDebug("crNetSend %d, (%d)", len, buf->size);*/
crNetSend( thread->netServer.conn, &(buf->pack), hdr, len );
}
buf->pack = crNetAlloc( thread->netServer.conn );
/* The network may have found a new mtu */
buf->mtu = thread->netServer.conn->mtu;
crPackSetBuffer( thread->packer, buf );
crPackResetPointers(thread->packer);
#ifdef CHROMIUM_THREADSAFE
CR_UNLOCK_PACKER_CONTEXT(thread->packer);
#endif
}
/**
* XXX NOTE: there's a lot of duplicate code here common to the
* pack, tilesort and replicate SPUs. Try to simplify someday!
*/
void packspuHuge( CROpcode opcode, void *buf )
{
GET_THREAD(thread);
unsigned int len;
unsigned char *src;
CRMessageOpcodes *msg;
CRASSERT(thread);
/* packet length is indicated by the variable length field, and
includes an additional word for the opcode (with alignment) and
a header */
len = ((unsigned int *) buf)[-1];
if (pack_spu.swap)
{
/* It's already been swapped, swap it back. */
len = SWAP32(len);
}
len += 4 + sizeof(CRMessageOpcodes);
/* write the opcode in just before the length */
((unsigned char *) buf)[-5] = (unsigned char) opcode;
/* fix up the pointer to the packet to include the length & opcode
& header */
src = (unsigned char *) buf - 8 - sizeof(CRMessageOpcodes);
msg = (CRMessageOpcodes *) src;
if (pack_spu.swap)
{
msg->header.type = (CRMessageType) SWAP32(CR_MESSAGE_OPCODES);
msg->numOpcodes = SWAP32(1);
}
else
{
msg->header.type = CR_MESSAGE_OPCODES;
msg->numOpcodes = 1;
}
CRASSERT( thread->netServer.conn );
crNetSend( thread->netServer.conn, NULL, src, len );
}
static void packspuFirstConnectToServer( CRNetServer *server
#if defined(VBOX_WITH_CRHGSMI) && defined(IN_GUEST)
, struct VBOXUHGSMI *pHgsmi
#endif
)
{
crNetInit( packspuReceiveData, NULL );
crNetServerConnect( server
#if defined(VBOX_WITH_CRHGSMI) && defined(IN_GUEST)
, pHgsmi
#endif
);
}
void packspuConnectToServer( CRNetServer *server
#if defined(VBOX_WITH_CRHGSMI) && defined(IN_GUEST)
, struct VBOXUHGSMI *pHgsmi
#endif
)
{
if (pack_spu.numThreads == 0) {
packspuFirstConnectToServer( server
#if defined(VBOX_WITH_CRHGSMI) && defined(IN_GUEST)
, pHgsmi
#endif
);
if (!server->conn) {
crError("packspuConnectToServer: no connection on first create!");
return;
}
pack_spu.swap = server->conn->swap;
}
else {
/* a new pthread */
crNetNewClient(server
#if defined(VBOX_WITH_CRHGSMI) && defined(IN_GUEST)
, pHgsmi
#endif
);
}
}