VBoxGuestR3LibVideo.cpp revision 2f0ff8eed7f73f05b9af49aff1b6c213cf4c80a8
/* $Id$ */
/** @file
* VBoxGuestR3Lib - Ring-3 Support Library for VirtualBox guest additions, Video.
*/
/*
* Copyright (C) 2007-2009 Oracle Corporation
*
* This file is part of VirtualBox Open Source Edition (OSE), as
* available from http://www.virtualbox.org. This file is free software;
* you can redistribute it and/or modify it under the terms of the GNU
* General Public License (GPL) as published by the Free Software
* Foundation, in version 2 as it comes in the "COPYING" file of the
* VirtualBox OSE distribution. VirtualBox OSE is distributed in the
* hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
*
* The contents of this file may alternatively be used under the terms
* of the Common Development and Distribution License Version 1.0
* (CDDL) only, as it comes in the "COPYING.CDDL" file of the
* VirtualBox OSE distribution, in which case the provisions of the
* CDDL are applicable instead of those of the GPL.
*
* You may elect to license modified versions of this file under the
* terms and conditions of either the GPL or the CDDL or both.
*/
/*******************************************************************************
* Header Files *
*******************************************************************************/
#include <iprt/assert.h>
#ifndef VBOX_VBGLR3_XFREE86
# include <iprt/mem.h>
#endif
#include <iprt/string.h>
#include <VBox/log.h>
#include <VBox/HostServices/GuestPropertySvc.h> /* For Save and RetrieveVideoMode */
#include "VBGLR3Internal.h"
#ifdef VBOX_VBGLR3_XFREE86
/* Rather than try to resolve all the header file conflicts, I will just
prototype what we need here. */
extern "C" void* xf86memcpy(void*,const void*,xf86size_t);
# undef memcpy
# define memcpy xf86memcpy
extern "C" void* xf86memset(const void*,int,xf86size_t);
# undef memset
# define memset xf86memset
#endif /* VBOX_VBGLR3_XFREE86 */
#define VIDEO_PROP_PREFIX "/VirtualBox/GuestAdd/Vbgl/Video/"
/**
* Enable or disable video acceleration.
*
* @returns VBox status code.
*
* @param fEnable Pass zero to disable, any other value to enable.
*/
VBGLR3DECL(int) VbglR3VideoAccelEnable(bool fEnable)
{
VMMDevVideoAccelEnable Req;
vmmdevInitRequest(&Req.header, VMMDevReq_VideoAccelEnable);
Req.u32Enable = fEnable;
Req.cbRingBuffer = VBVA_RING_BUFFER_SIZE;
Req.fu32Status = 0;
return vbglR3GRPerform(&Req.header);
}
/**
* Flush the video buffer.
*
* @returns VBox status code.
*/
VBGLR3DECL(int) VbglR3VideoAccelFlush(void)
{
VMMDevVideoAccelFlush Req;
vmmdevInitRequest(&Req.header, VMMDevReq_VideoAccelFlush);
return vbglR3GRPerform(&Req.header);
}
/**
* Send mouse pointer shape information to the host.
*
* @returns VBox status code.
*
* @param fFlags Mouse pointer flags.
* @param xHot X coordinate of hot spot.
* @param yHot Y coordinate of hot spot.
* @param cx Pointer width.
* @param cy Pointer height.
* @param pvImg Pointer to the image data (can be NULL).
* @param cbImg Size of the image data pointed to by pvImg.
*/
VBGLR3DECL(int) VbglR3SetPointerShape(uint32_t fFlags, uint32_t xHot, uint32_t yHot, uint32_t cx, uint32_t cy, const void *pvImg, size_t cbImg)
{
VMMDevReqMousePointer *pReq;
size_t cbReq = vmmdevGetMousePointerReqSize(cx, cy);
AssertReturn( !pvImg
|| cbReq == RT_OFFSETOF(VMMDevReqMousePointer, pointerData) + cbImg,
VERR_INVALID_PARAMETER);
int rc = vbglR3GRAlloc((VMMDevRequestHeader **)&pReq, cbReq,
VMMDevReq_SetPointerShape);
if (RT_SUCCESS(rc))
{
pReq->fFlags = fFlags;
pReq->xHot = xHot;
pReq->yHot = yHot;
pReq->width = cx;
pReq->height = cy;
if (pvImg)
memcpy(pReq->pointerData, pvImg, cbImg);
rc = vbglR3GRPerform(&pReq->header);
if (RT_SUCCESS(rc))
rc = pReq->header.rc;
vbglR3GRFree(&pReq->header);
}
return rc;
}
/**
* Send mouse pointer shape information to the host.
* This version of the function accepts a request for clients that
* already allocate and manipulate the request structure directly.
*
* @returns VBox status code.
*
* @param pReq Pointer to the VMMDevReqMousePointer structure.
*/
VBGLR3DECL(int) VbglR3SetPointerShapeReq(VMMDevReqMousePointer *pReq)
{
int rc = vbglR3GRPerform(&pReq->header);
if (RT_SUCCESS(rc))
rc = pReq->header.rc;
return rc;
}
/**
* Query the last display change request sent from the host to the guest.
*
* @returns iprt status value
* @param pcx Where to store the horizontal pixel resolution
* requested (a value of zero means do not change).
* @param pcy Where to store the vertical pixel resolution
* requested (a value of zero means do not change).
* @param pcBits Where to store the bits per pixel requested (a value
* of zero means do not change).
* @param iDisplay Where to store the display number the request was for
* - 0 for the primary display, 1 for the first
* secondary display, etc.
* @param fAck whether or not to acknowlege the newest request sent by
* the host. If this is set, the function will return the
* most recent host request, otherwise it will return the
* last request to be acknowleged.
*
*/
VBGLR3DECL(int) VbglR3GetDisplayChangeRequest(uint32_t *pcx, uint32_t *pcy, uint32_t *pcBits, uint32_t *piDisplay, bool fAck)
{
VMMDevDisplayChangeRequest2 Req;
AssertPtrReturn(pcx, VERR_INVALID_PARAMETER);
AssertPtrReturn(pcy, VERR_INVALID_PARAMETER);
AssertPtrReturn(pcBits, VERR_INVALID_PARAMETER);
AssertPtrReturn(piDisplay, VERR_INVALID_PARAMETER);
RT_ZERO(Req);
vmmdevInitRequest(&Req.header, VMMDevReq_GetDisplayChangeRequest2);
if (fAck)
Req.eventAck = VMMDEV_EVENT_DISPLAY_CHANGE_REQUEST;
int rc = vbglR3GRPerform(&Req.header);
if (RT_SUCCESS(rc))
rc = Req.header.rc;
if (RT_SUCCESS(rc))
{
*pcx = Req.xres;
*pcy = Req.yres;
*pcBits = Req.bpp;
*piDisplay = Req.display;
}
return rc;
}
/**
* Query the host as to whether it likes a specific video mode.
*
* @returns the result of the query
* @param cx the width of the mode being queried
* @param cy the height of the mode being queried
* @param cBits the bpp of the mode being queried
*/
VBGLR3DECL(bool) VbglR3HostLikesVideoMode(uint32_t cx, uint32_t cy, uint32_t cBits)
{
bool fRc = true; /* If for some reason we can't contact the host then
* we like everything. */
int rc;
VMMDevVideoModeSupportedRequest req;
vmmdevInitRequest(&req.header, VMMDevReq_VideoModeSupported);
req.width = cx;
req.height = cy;
req.bpp = cBits;
req.fSupported = true;
rc = vbglR3GRPerform(&req.header);
if (RT_SUCCESS(rc) && RT_SUCCESS(req.header.rc))
fRc = req.fSupported;
return fRc;
}
/**
* Save video mode parameters to the registry.
*
* @returns iprt status value
* @param pszName the name to save the mode parameters under
* @param cx mode width
* @param cy mode height
* @param cBits bits per pixel for the mode
*/
VBGLR3DECL(int) VbglR3SaveVideoMode(const char *pszName, uint32_t cx, uint32_t cy, uint32_t cBits)
{
#if defined(VBOX_WITH_GUEST_PROPS)
using namespace guestProp;
char szModeName[MAX_NAME_LEN];
char szModeParms[MAX_VALUE_LEN];
uint32_t u32ClientId = 0;
RTStrPrintf(szModeName, sizeof(szModeName), VIDEO_PROP_PREFIX"%s", pszName);
RTStrPrintf(szModeParms, sizeof(szModeParms), "%dx%dx%d", cx, cy, cBits);
int rc = VbglR3GuestPropConnect(&u32ClientId);
if (RT_SUCCESS(rc))
rc = VbglR3GuestPropWriteValue(u32ClientId, szModeName, szModeParms);
if (u32ClientId != 0)
VbglR3GuestPropDisconnect(u32ClientId); /* Return value ignored, because what can we do anyway? */
return rc;
#else /* !VBOX_WITH_GUEST_PROPS */
return VERR_NOT_IMPLEMENTED;
#endif /* !VBOX_WITH_GUEST_PROPS */
}
/**
* Retrieve video mode parameters from the guest property store.
*
* @returns iprt status value
* @param pszName the name under which the mode parameters are saved
* @param pcx where to store the mode width
* @param pcy where to store the mode height
* @param pcBits where to store the bits per pixel for the mode
*/
VBGLR3DECL(int) VbglR3RetrieveVideoMode(const char *pszName, uint32_t *pcx, uint32_t *pcy, uint32_t *pcBits)
{
#if defined(VBOX_WITH_GUEST_PROPS)
using namespace guestProp;
/*
* First we retreive the video mode which is saved as a string in the
* guest property store.
*/
/* The buffer for VbglR3GuestPropReadValue. If this is too small then
* something is wrong with the data stored in the property. */
char szModeParms[1024];
uint32_t u32ClientId = 0;
uint32_t cx, cy, cBits;
int rc = VbglR3GuestPropConnect(&u32ClientId);
if (RT_SUCCESS(rc))
{
char szModeName[MAX_NAME_LEN];
RTStrPrintf(szModeName, sizeof(szModeName), VIDEO_PROP_PREFIX"%s", pszName);
/** @todo add a VbglR3GuestPropReadValueF/FV that does the RTStrPrintf for you. */
rc = VbglR3GuestPropReadValue(u32ClientId, szModeName, szModeParms,
sizeof(szModeParms), NULL);
}
/*
* Now we convert the string returned to numeric values.
*/
char *pszNext;
if (RT_SUCCESS(rc))
/* Extract the width from the string */
rc = RTStrToUInt32Ex(szModeParms, &pszNext, 10, &cx);
if ((rc != VWRN_TRAILING_CHARS) || (*pszNext != 'x'))
rc = VERR_PARSE_ERROR;
if (RT_SUCCESS(rc))
{
/* Extract the height from the string */
++pszNext;
rc = RTStrToUInt32Ex(pszNext, &pszNext, 10, &cy);
}
if ((rc != VWRN_TRAILING_CHARS) || (*pszNext != 'x'))
rc = VERR_PARSE_ERROR;
if (RT_SUCCESS(rc))
{
/* Extract the bpp from the string */
++pszNext;
rc = RTStrToUInt32Full(pszNext, 10, &cBits);
}
if (rc != VINF_SUCCESS)
rc = VERR_PARSE_ERROR;
/*
* And clean up and return the values if we successfully obtained them.
*/
if (u32ClientId != 0)
VbglR3GuestPropDisconnect(u32ClientId); /* Return value ignored, because what can we do anyway? */
if (RT_SUCCESS(rc))
{
*pcx = cx;
*pcy = cy;
*pcBits = cBits;
}
return rc;
#else /* !VBOX_WITH_GUEST_PROPS */
return VERR_NOT_IMPLEMENTED;
#endif /* !VBOX_WITH_GUEST_PROPS */
}