socket.h revision 8c48cf39dfb84c1f26e0e7fbd1c407e25a34eef1
/** @file
* IPRT - Network Sockets.
*/
/*
* Copyright (C) 2006-2011 Oracle Corporation
*
* This file is part of VirtualBox Open Source Edition (OSE), as
* available from http://www.virtualbox.org. This file is free software;
* you can redistribute it and/or modify it under the terms of the GNU
* General Public License (GPL) as published by the Free Software
* Foundation, in version 2 as it comes in the "COPYING" file of the
* VirtualBox OSE distribution. VirtualBox OSE is distributed in the
* hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
*
* The contents of this file may alternatively be used under the terms
* of the Common Development and Distribution License Version 1.0
* (CDDL) only, as it comes in the "COPYING.CDDL" file of the
* VirtualBox OSE distribution, in which case the provisions of the
* CDDL are applicable instead of those of the GPL.
*
* You may elect to license modified versions of this file under the
* terms and conditions of either the GPL or the CDDL or both.
*/
#ifndef ___iprt_socket_h
#define ___iprt_socket_h
#include <iprt/cdefs.h>
#include <iprt/types.h>
#include <iprt/thread.h>
#include <iprt/net.h>
#include <iprt/sg.h>
#ifdef IN_RING0
# error "There are no RTSocket APIs available Ring-0 Host Context!"
#endif
RT_C_DECLS_BEGIN
/** @defgroup grp_rt_tcp RTSocket - Network Sockets
* @ingroup grp_rt
* @{
*/
/**
* Retains a reference to the socket handle.
*
* @returns New reference count, UINT32_MAX on invalid handle (asserted).
*
* @param hSocket The socket handle.
*/
RTDECL(uint32_t) RTSocketRetain(RTSOCKET hSocket);
/**
* Release a reference to the socket handle.
*
* When the reference count reaches zero, the socket handle is shut down and
* destroyed. This will not be graceful shutdown, use the protocol specific
* close method if this is desired.
*
* @returns New reference count, UINT32_MAX on invalid handle (asserted).
*
* @param hSocket The socket handle. The NIL handle is quietly
* ignored and 0 is returned.
*/
RTDECL(uint32_t) RTSocketRelease(RTSOCKET hSocket);
/**
* Shuts down the socket, close it and then release one handle reference.
*
* This is slightly different from RTSocketRelease which will first do the
* shutting down and closing when the reference count reaches zero.
*
* @returns IPRT status code.
* @param hSocket The socket handle. NIL is ignored.
*
* @remarks This will not perform a graceful shutdown of the socket, it will
* just destroy it. Use the protocol specific close method if this is
* desired.
*/
RTDECL(int) RTSocketClose(RTSOCKET hSocket);
/**
* Creates an IPRT socket handle from a native one.
*
* Do NOT use the native handle after passing it to this function, IPRT owns it
* and might even have closed upon a successful return.
*
* @returns IPRT status code.
* @param phSocket Where to store the IPRT socket handle.
* @param uNative The native handle.
*/
RTDECL(int) RTSocketFromNative(PRTSOCKET phSocket, RTHCINTPTR uNative);
/**
* Gets the native socket handle.
*
* @returns The native socket handle or RTHCUINTPTR_MAX if not invalid.
* @param hSocket The socket handle.
*/
RTDECL(RTHCUINTPTR) RTSocketToNative(RTSOCKET hSocket);
/**
* Helper that ensures the correct inheritability of a socket.
*
* We're currently ignoring failures.
*
* @returns IPRT status code
* @param hSocket The socket handle.
* @param fInheritable The desired inheritability state.
*/
RTDECL(int) RTSocketSetInheritance(RTSOCKET hSocket, bool fInheritable);
/**
* Parse Internet style addresses, getting a generic IPRT network address.
*
* @returns IPRT status code
* @param pszAddress Name or IP address.
* @param uPort Port number (host byte order).
* @param pAddr Where to return the generic IPRT network address.
*/
RTDECL(int) RTSocketParseInetAddress(const char *pszAddress, unsigned uPort, PRTNETADDR pAddr);
/**
* Receive data from a socket.
*
* @returns IPRT status code.
* @param hSocket The socket handle.
* @param pvBuffer Where to put the data we read.
* @param cbBuffer Read buffer size.
* @param pcbRead Number of bytes read. If NULL the entire buffer
* will be filled upon successful return. If not NULL a
* partial read can be done successfully.
*/
RTDECL(int) RTSocketRead(RTSOCKET hSocket, void *pvBuffer, size_t cbBuffer, size_t *pcbRead);
/**
* Receive data from a socket, including sender address. Mainly useful
* for datagram sockets.
*
* @returns IPRT status code.
* @param hSocket The socket handle.
* @param pvBuffer Where to put the data we read.
* @param cbBuffer Read buffer size.
* @param pcbRead Number of bytes read. Must be non-NULL.
* @param pSrcAddr Pointer to sender address buffer. May be NULL.
*/
RTDECL(int) RTSocketReadFrom(RTSOCKET hSocket, void *pvBuffer, size_t cbBuffer, size_t *pcbRead, PRTNETADDR pSrcAddr);
/**
* Send data to a socket.
*
* @returns IPRT status code.
* @retval VERR_INTERRUPTED if interrupted before anything was written.
*
* @param hSocket The socket handle.
* @param pvBuffer Buffer to write data to socket.
* @param cbBuffer How much to write.
*/
RTDECL(int) RTSocketWrite(RTSOCKET hSocket, const void *pvBuffer, size_t cbBuffer);
/**
* Send data to a socket, including destination address. Mainly useful
* for datagram sockets.
*
* @returns IPRT status code.
* @retval VERR_INTERRUPTED if interrupted before anything was written.
*
* @param hSocket The socket handle.
* @param pvBuffer Buffer to write data to socket.
* @param cbBuffer How much to write.
* @param pDstAddr Pointer to destination address. May be NULL.
*/
RTDECL(int) RTSocketWriteTo(RTSOCKET hSocket, const void *pvBuffer, size_t cbBuffer, PCRTNETADDR pDstAddr);
/**
* Checks if the socket is ready for reading (for I/O multiplexing).
*
* @returns IPRT status code.
* @param hSocket The socket handle.
* @param cMillies Number of milliseconds to wait for the socket. Use
* RT_INDEFINITE_WAIT to wait for ever.
*/
RTDECL(int) RTSocketSelectOne(RTSOCKET hSocket, RTMSINTERVAL cMillies);
/** @name Select events
* @{ */
/** Readable without blocking. */
#define RTSOCKET_EVT_READ RT_BIT_32(0)
/** Writable without blocking. */
#define RTSOCKET_EVT_WRITE RT_BIT_32(1)
/** Error condition, hangup, exception or similar. */
#define RTSOCKET_EVT_ERROR RT_BIT_32(2)
/** Mask of the valid bits. */
#define RTSOCKET_EVT_VALID_MASK UINT32_C(0x00000007)
/** @} */
/**
* Socket I/O multiplexing
* Checks if the socket is ready for one of the given events.
*
* @returns iprt status code.
* @param Sock Socket descriptor.
* @param fEvents Event mask to wait for.
* @param pfEvents Where to store the event mask on return.
* @param cMillies Number of milliseconds to wait for the socket.
* Use RT_INDEFINITE_WAIT to wait for ever.
*/
RTR3DECL(int) RTSocketSelectOneEx(RTSOCKET Sock, uint32_t fEvents, uint32_t *pfEvents,
RTMSINTERVAL cMillies);
/**
* Shuts down one or both directions of communciation.
*
* @returns IPRT status code.
* @param hSocket The socket handle.
* @param fRead Whether to shutdown our read direction.
* @param fWrite Whether to shutdown our write direction.
*/
RTDECL(int) RTSocketShutdown(RTSOCKET hSocket, bool fRead, bool fWrite);
/**
* Gets the address of the local side.
*
* @returns IPRT status code.
* @param Sock Socket descriptor.
* @param pAddr Where to store the local address on success.
*/
RTDECL(int) RTSocketGetLocalAddress(RTSOCKET hSocket, PRTNETADDR pAddr);
/**
* Gets the address of the other party.
*
* @returns IPRT status code.
* @param Sock Socket descriptor.
* @param pAddr Where to store the peer address on success.
*/
RTDECL(int) RTSocketGetPeerAddress(RTSOCKET hSocket, PRTNETADDR pAddr);
/**
* Send data from a scatter/gather buffer to a socket.
*
* @returns IPRT status code.
* @retval VERR_INTERRUPTED if interrupted before anything was written.
*
* @param hSocket The socket handle.
* @param pSgBuf Scatter/gather buffer to write data to socket.
*/
RTDECL(int) RTSocketSgWrite(RTSOCKET hSocket, PCRTSGBUF pSgBuf);
/**
* Send data from multiple buffers to a socket.
*
* This is convenience wrapper around the RTSocketSgWrite and RTSgBufInit calls
* for lazy coders. The "L" in the function name is short for "list" just like
* in the execl libc API.
*
* @returns IPRT status code.
* @retval VERR_INTERRUPTED if interrupted before anything was written.
*
* @param hSocket The socket handle.
* @param cSegs The number of data segments in the following
* ellipsis.
* @param ... Pairs of buffer pointers (void const *) and buffer
* sizes (size_t). Make 101% sure the pointer is
* really size_t.
*/
RTDECL(int) RTSocketSgWriteL(RTSOCKET hSocket, size_t cSegs, ...);
/**
* Send data from multiple buffers to a socket.
*
* This is convenience wrapper around the RTSocketSgWrite and RTSgBufInit calls
* for lazy coders. The "L" in the function name is short for "list" just like
* in the execl libc API.
*
* @returns IPRT status code.
* @retval VERR_INTERRUPTED if interrupted before anything was written.
*
* @param hSocket The socket handle.
* @param cSegs The number of data segments in the following
* argument list.
* @param va Pairs of buffer pointers (void const *) and buffer
* sizes (size_t). Make 101% sure the pointer is
* really size_t.
*/
RTDECL(int) RTSocketSgWriteLV(RTSOCKET hSocket, size_t cSegs, va_list va);
/**
* Receive data from a socket.
*
* This version doesn't block if there is no data on the socket.
*
* @returns IPRT status code.
*
* @param hSocket The socket handle.
* @param pvBuffer Where to put the data we read.
* @param cbBuffer Read buffer size.
* @param pcbRead Number of bytes read.
*/
RTDECL(int) RTSocketReadNB(RTSOCKET hSocket, void *pvBuffer, size_t cbBuffer, size_t *pcbRead);
/**
* Send data to a socket.
*
* This version doesn't block if there is not enough room for the message.
*
* @returns IPRT status code.
*
* @param hSocket The socket handle.
* @param pvBuffer Buffer to write data to socket.
* @param cbBuffer How much to write.
* @param pcbWritten Number of bytes written.
*/
RTDECL(int) RTSocketWriteNB(RTSOCKET hSocket, const void *pvBuffer, size_t cbBuffer, size_t *pcbWritten);
/**
* Send data from a scatter/gather buffer to a socket.
*
* This version doesn't block if there is not enough room for the message.
*
* @returns iprt status code.
*
* @param Sock Socket descriptor.
* @param pSgBuf Scatter/gather buffer to write data to socket.
* @param pcbWritten Number of bytes written.
*/
RTR3DECL(int) RTSocketSgWriteNB(RTSOCKET Sock, PCRTSGBUF pSgBuf, size_t *pcbWritten);
/**
* Send data from multiple buffers to a socket.
*
* This version doesn't block if there is not enough room for the message.
* This is convenience wrapper around the RTSocketSgWrite and RTSgBufInit calls
* for lazy coders. The "L" in the function name is short for "list" just like
* in the execl libc API.
*
* @returns IPRT status code.
*
* @param hSocket The socket handle.
* @param cSegs The number of data segments in the following
* ellipsis.
* @param pcbWritten Number of bytes written.
* @param ... Pairs of buffer pointers (void const *) and buffer
* sizes (size_t). Make 101% sure the pointer is
* really size_t.
*/
RTR3DECL(int) RTSocketSgWriteLNB(RTSOCKET hSocket, size_t cSegs, size_t *pcbWritten, ...);
/**
* Send data from multiple buffers to a socket.
*
* This version doesn't block if there is not enough room for the message.
* This is convenience wrapper around the RTSocketSgWrite and RTSgBufInit calls
* for lazy coders. The "L" in the function name is short for "list" just like
* in the execl libc API.
*
* @returns IPRT status code.
*
* @param hSocket The socket handle.
* @param cSegs The number of data segments in the following
* argument list.
* @param pcbWritten Number of bytes written.
* @param va Pairs of buffer pointers (void const *) and buffer
* sizes (size_t). Make 101% sure the pointer is
* really size_t.
*/
RTR3DECL(int) RTSocketSgWriteLVNB(RTSOCKET hSocket, size_t cSegs, size_t *pcbWritten, va_list va);
/** @} */
RT_C_DECLS_END
#endif