err.h revision 4879d45df9d433a06061c2d2390b33655e2a06aa
/** @file
* InnoTek Portable Runtime - Status Codes.
*/
/*
* Copyright (C) 2006 InnoTek Systemberatung GmbH
*
* This file is part of VirtualBox Open Source Edition (OSE), as
* available from http://www.virtualbox.org. This file is free software;
* General Public License as published by the Free Software Foundation,
* in version 2 as it comes in the "COPYING" file of the VirtualBox OSE
* distribution. VirtualBox OSE is distributed in the hope that it will
* be useful, but WITHOUT ANY WARRANTY of any kind.
*
* If you received this file as part of a commercial VirtualBox
* distribution, then only the terms of your commercial VirtualBox
* license agreement apply instead of the previous paragraph.
*/
#ifndef __iprt_err_h__
#define __iprt_err_h__
/** @defgroup grp_rt_err RTErr - Status Codes
* @ingroup grp_rt
* @{
*/
/* SED-START */
/** @name Misc. Status Codes
* @{
*/
/** Success. */
#define VINF_SUCCESS 0
/** General failure - DON'T USE THIS!!!
* (aka SUPDRV_ERR_GENERAL_FAILURE) */
#define VERR_GENERAL_FAILURE (-1)
/** Invalid parameter.
* (aka SUPDRV_ERR_INVALID_PARAM) */
#define VERR_INVALID_PARAMETER (-2)
/** Invalid magic or cookie.
* (aka SUPDRV_ERR_INVALID_MAGIC) */
#define VERR_INVALID_MAGIC (-3)
/** Invalid loader handle.
* (aka SUPDRV_ERR_INVALID_HANDLE) */
#define VERR_INVALID_HANDLE (-4)
/** Failed to lock the address range.
* (aka SUPDRV_ERR_INVALID_HANDLE) */
#define VERR_LOCK_FAILED (-5)
/** Invalid memory pointer.
* (aka SUPDRV_ERR_INVALID_POINTER) */
#define VERR_INVALID_POINTER (-6)
/** Failed to patch the IDT.
* (aka SUPDRV_ERR_IDT_FAILED) */
#define VERR_IDT_FAILED (-7)
/** Memory allocation failed.
* (aka SUPDRV_ERR_NO_MEMORY) */
#define VERR_NO_MEMORY (-8)
/** Already loaded.
* (aka SUPDRV_ERR_ALREADY_LOADED) */
#define VERR_ALREADY_LOADED (-9)
/** Permission denied.
* (aka SUPDRV_ERR_PERMISSION_DENIED) */
#define VERR_PERMISSION_DENIED (-10)
/** Version mismatch.
* (aka SUPDRV_ERR_VERSION_MISMATCH) */
#define VERR_VERSION_MISMATCH (-11)
/** The request function is not implemented. */
#define VERR_NOT_IMPLEMENTED (-12)
/** Failed to allocate temporary memory. */
#define VERR_NO_TMP_MEMORY (-20)
/** Invalid file mode mask (RTFMODE). */
#define VERR_INVALID_FMODE (-21)
/** Incorrect call order. */
#define VERR_WRONG_ORDER (-22)
/** There is no TLS (thread local storage) available for storing the current thread. */
#define VERR_NO_TLS_FOR_SELF (-23)
/** Failed to set the TLS (thread local storage) entry which points to our thread structure. */
#define VERR_FAILED_TO_SET_SELF_TLS (-24)
/** Not able to allocate contiguous memory. */
#define VERR_NO_CONT_MEMORY (-26)
/** No memory available for page table or page directory. */
#define VERR_NO_PAGE_MEMORY (-27)
/** Already initialized. */
#define VINF_ALREADY_INITIALIZED 28
/** The specified thread is dead. */
#define VERR_THREAD_IS_DEAD (-29)
/** The specified thread is not waitable. */
#define VERR_THREAD_NOT_WAITABLE (-30)
/** Pagetable not present. */
#define VERR_PAGE_TABLE_NOT_PRESENT (-31)
/** Internal error - we're screwed if this happens. */
#define VERR_INTERNAL_ERROR (-32)
/** The per process timer is busy. */
#define VERR_TIMER_BUSY (-33)
/** Address conflict. */
#define VERR_ADDRESS_CONFLICT (-34)
/** Unresolved (unknown) host platform error. */
#define VERR_UNRESOLVED_ERROR (-35)
/** Invalid function. */
#define VERR_INVALID_FUNCTION (-36)
/** Not supported. */
#define VERR_NOT_SUPPORTED (-37)
/** Access denied. */
#define VERR_ACCESS_DENIED (-38)
/** Call interrupted. */
#define VERR_INTERRUPTED (-39)
/** Timeout. */
#define VERR_TIMEOUT (-40)
/** Buffer too small to save result. */
#define VERR_BUFFER_OVERFLOW (-41)
/** Buffer too small to save result. */
#define VINF_BUFFER_OVERFLOW 41
/** Data size overflow. */
#define VERR_TOO_MUCH_DATA (-42)
/** Max threads number reached. */
#define VERR_MAX_THRDS_REACHED (-43)
/** Max process number reached. */
#define VERR_MAX_PROCS_REACHED (-44)
/** The recipient process has refused the signal. */
#define VERR_SIGNAL_REFUSED (-45)
/** A signal is already pending. */
#define VERR_SIGNAL_PENDING (-46)
/** The signal being posted is not correct. */
#define VERR_SIGNAL_INVALID (-47)
/** The state changed.
* This is a generic error message and needs a context to make sense. */
#define VERR_STATE_CHANGED (-48)
/** Warning, the state changed.
* This is a generic error message and needs a context to make sense. */
#define VWRN_STATE_CHANGED 48
/** Error while parsing UUID string */
#define VERR_INVALID_UUID_FORMAT (-49)
/** The specified process was not found. */
#define VERR_PROCESS_NOT_FOUND (-50)
/** The process specified to a non-block wait had not exitted. */
#define VERR_PROCESS_RUNNING (-51)
/** Retry the operation. */
#define VERR_TRY_AGAIN (-52)
/** Generic parse error. */
#define VERR_PARSE_ERROR (-53)
/** Value out of range. */
#define VERR_OUT_OF_RANGE (-54)
/** A numeric convertion encountered a value which was too big for the target. */
#define VERR_NUMBER_TOO_BIG (-55)
/** A numeric convertion encountered a value which was too big for the target. */
#define VWRN_NUMBER_TOO_BIG 55
/** The number begin converted (string) contained no digits. */
#define VERR_NO_DIGITS (-56)
/** The number begin converted (string) contained no digits. */
#define VWRN_NO_DIGITS 56
/** Encountered a '-' during convertion to an unsigned value. */
#define VERR_NEGATIVE_UNSIGNED (-57)
/** Encountered a '-' during convertion to an unsigned value. */
#define VWRN_NEGATIVE_UNSIGNED 57
/** Error while characters translation (unicode and so). */
#define VERR_NO_TRANSLATION (-58)
/** Encountered unicode code point which is reserved for use as endian indicator (0xffff or 0xfffe). */
#define VERR_CODE_POINT_ENDIAN_INDICATOR (-59)
/** Encountered unicode code point in the surrogate range (0xd800 to 0xdfff). */
#define VERR_CODE_POINT_SURROGATE (-60)
/** A string claiming to be UTF-8 is incorrectly encoded. */
#define VERR_INVALID_UTF8_ENCODING (-61)
/** Ad string claiming to be in UTF-16 is incorrectly encoded. */
#define VERR_INVALID_UTF16_ENCODING (-62)
/** Encountered a unicode code point which cannot be represented as UTF-16. */
#define VERR_CANT_RECODE_AS_UTF16 (-63)
/** Got an out of memory condition trying to allocate a string. */
#define VERR_NO_STR_MEMORY (-64)
/** Got an out of memory condition trying to allocate a UTF-16 (/UCS-2) string. */
#define VERR_NO_UTF16_MEMORY (-65)
/** Get an out of memory condition trying to allocate a code point array. */
#define VERR_NO_CODE_POINT_MEMORY (-66)
/** Can't free the memory because it's used in mapping. */
#define VERR_MEMORY_BUSY (-67)
/** The timer can't be started because it's already active. */
#define VERR_TIMER_ACTIVE (-68)
/** The timer can't be stopped because i's already suspended. */
#define VERR_TIMER_SUSPENDED (-69)
/** The operation was cancelled by the user. */
#define VERR_CANCELLED (-70)
/** Failed to initialize a memory object.
* Exactly what this means is OS specific. */
#define VERR_MEMOBJ_INIT_FAILED (-71)
/** Out of memory condition when allocating memory with low physical backing. */
#define VERR_NO_LOW_MEMORY (-72)
/** Out of memory condition when allocating physical memory (without mapping). */
#define VERR_NO_PHYS_MEMORY (-73)
/** The address (virtual or physical) is too big. */
#define VERR_ADDRESS_TOO_BIG (-74)
/** Failed to map a memory object. */
#define VERR_MAP_FAILED (-75)
/** @} */
* @{
*/
/** Unresolved (unknown) file i/o error. */
#define VERR_FILE_IO_ERROR (-100)
#define VERR_OPEN_FAILED (-101)
/** File not found. */
#define VERR_FILE_NOT_FOUND (-102)
/** Path not found. */
#define VERR_PATH_NOT_FOUND (-103)
#define VERR_INVALID_NAME (-104)
#define VERR_ALREADY_EXISTS (-105)
/** Too many open files. */
#define VERR_TOO_MANY_OPEN_FILES (-106)
/** Seek error. */
#define VERR_SEEK (-107)
/** Seek below file start. */
#define VERR_NEGATIVE_SEEK (-108)
/** Trying to seek on device. */
#define VERR_SEEK_ON_DEVICE (-109)
/** Reached the end of the file. */
#define VERR_EOF (-110)
/** Reached the end of the file. */
#define VINF_EOF 110
/** Generic file read error. */
#define VERR_READ_ERROR (-111)
/** Generic file write error. */
#define VERR_WRITE_ERROR (-112)
/** Write protect error. */
#define VERR_WRITE_PROTECT (-113)
/** Sharing violetion, file is being used by another process. */
#define VERR_SHARING_VIOLATION (-114)
/** Unable to lock a region of a file. */
#define VERR_FILE_LOCK_FAILED (-115)
/** File access error, another process has locked a portion of the file. */
#define VERR_FILE_LOCK_VIOLATION (-116)
/** File or directory can't be created. */
#define VERR_CANT_CREATE (-117)
/** Directory can't be deleted. */
#define VERR_CANT_DELETE_DIRECTORY (-118)
/** Can't move file to another disk. */
#define VERR_NOT_SAME_DEVICE (-119)
/** The filename or extension is too long. */
#define VERR_FILENAME_TOO_LONG (-120)
/** Media not present in drive. */
#define VERR_MEDIA_NOT_PRESENT (-121)
/** The type of media was not recognized. Not formatted? */
#define VERR_MEDIA_NOT_RECOGNIZED (-122)
/** Can't unlock - region was not locked. */
#define VERR_FILE_NOT_LOCKED (-123)
/** Unrecoverable error: lock was lost. */
#define VERR_FILE_LOCK_LOST (-124)
/** Can't delete directory with files. */
#define VERR_DIR_NOT_EMPTY (-125)
/** A directory operation was attempted on a non-directory object. */
#define VERR_NOT_A_DIRECTORY (-126)
/** A non-directory operation was attempted on a directory object. */
#define VERR_IS_A_DIRECTORY (-127)
/** @} */
/** @name Generic Filesystem I/O Status Codes
* @{
*/
/** Unresolved (unknown) disk i/o error. */
#define VERR_DISK_IO_ERROR (-150)
/** Invalid drive number. */
#define VERR_INVALID_DRIVE (-151)
/** Disk is full. */
#define VERR_DISK_FULL (-152)
/** Disk was changed. */
#define VERR_DISK_CHANGE (-153)
/** Drive is locked. */
#define VERR_DRIVE_LOCKED (-154)
/** The specified disk or diskette cannot be accessed. */
#define VERR_DISK_INVALID_FORMAT (-155)
/** Too many symbolic links. */
#define VERR_TOO_MANY_SYMLINKS (-156)
/** @} */
/** @name Generic Directory Enumeration Status Codes
* @{
*/
/** Unresolved (unknown) search error. */
#define VERR_SEARCH_ERROR (-200)
/** No more files found. */
#define VERR_NO_MORE_FILES (-201)
/** No more search handles available. */
#define VERR_NO_MORE_SEARCH_HANDLES (-202)
/** RTDirReadEx() failed to retrieve the extra data which was requested. */
#define VWRN_NO_DIRENT_INFO 203
/** @} */
/** @name Generic Device I/O Status Codes
* @{
*/
/** Unresolved (unknown) device i/o error. */
#define VERR_DEV_IO_ERROR (-250)
/** Device i/o: Bad unit. */
#define VERR_IO_BAD_UNIT (-251)
/** Device i/o: Not ready. */
#define VERR_IO_NOT_READY (-252)
/** Device i/o: Bad command. */
#define VERR_IO_BAD_COMMAND (-253)
/** Device i/o: CRC error. */
#define VERR_IO_CRC (-254)
/** Device i/o: Bad length. */
#define VERR_IO_BAD_LENGTH (-255)
/** Device i/o: Sector not found. */
#define VERR_IO_SECTOR_NOT_FOUND (-256)
/** Device i/o: General failure. */
#define VERR_IO_GEN_FAILURE (-257)
/** @} */
/** @name Generic Pipe I/O Status Codes
* @{
*/
/** Unresolved (unknown) pipe i/o error. */
#define VERR_PIPE_IO_ERROR (-300)
/** Broken pipe. */
#define VERR_BROKEN_PIPE (-301)
/** Bad pipe. */
#define VERR_BAD_PIPE (-302)
/** Pipe is busy. */
#define VERR_PIPE_BUSY (-303)
/** No data in pipe. */
#define VERR_NO_DATA (-304)
/** Pipe is not connected. */
#define VERR_PIPE_NOT_CONNECTED (-305)
/** More data available in pipe. */
#define VERR_MORE_DATA (-306)
/** @} */
/** @name Generic Semaphores Status Codes
* @{
*/
/** Unresolved (unknown) semaphore error. */
#define VERR_SEM_ERROR (-350)
/** Too many semaphores. */
#define VERR_TOO_MANY_SEMAPHORES (-351)
/** Exclusive semaphore is owned by another process. */
#define VERR_EXCL_SEM_ALREADY_OWNED (-352)
/** The semaphore is set and cannot be closed. */
#define VERR_SEM_IS_SET (-353)
/** The semaphore cannot be set again. */
#define VERR_TOO_MANY_SEM_REQUESTS (-354)
/** Attempt to release mutex not owned by caller. */
#define VERR_NOT_OWNER (-355)
/** The semaphore has been opened too many times. */
#define VERR_TOO_MANY_OPENS (-356)
/** The maximum posts for the event semaphore has been reached. */
#define VERR_TOO_MANY_POSTS (-357)
/** The event semaphore has already been posted. */
#define VERR_ALREADY_POSTED (-358)
/** The event semaphore has already been reset. */
#define VERR_ALREADY_RESET (-359)
/** The semaphore is in use. */
#define VERR_SEM_BUSY (-360)
/** The previous ownership of this semaphore has ended. */
#define VERR_SEM_OWNER_DIED (-361)
/** Failed to open semaphore by name - not found. */
#define VERR_SEM_NOT_FOUND (-362)
/** Semaphore destroyed while waiting. */
#define VERR_SEM_DESTROYED (-363)
/** Nested ownership requests are not permitted for this semaphore type. */
#define VERR_SEM_NESTED (-364)
/** Deadlock detected. */
#define VERR_DEADLOCK (-365)
/** Ping-Pong listen or speak out of turn error. */
#define VERR_SEM_OUT_OF_TURN (-366)
/** @} */
/** @name Generic Network I/O Status Codes
* @{
*/
/** Unresolved (unknown) network error. */
#define VERR_NET_IO_ERROR (-400)
/** The network is busy or is out of resources. */
#define VERR_NET_OUT_OF_RESOURCES (-401)
/** Net host name not found. */
#define VERR_NET_HOST_NOT_FOUND (-402)
/** Network path not found. */
#define VERR_NET_PATH_NOT_FOUND (-403)
/** General network printing error. */
#define VERR_NET_PRINT_ERROR (-404)
/** The machine is not on the network. */
#define VERR_NET_NO_NETWORK (-405)
/** Name is not unique on the network. */
#define VERR_NET_NOT_UNIQUE_NAME (-406)
/* These are BSD networking error codes - numbers correspond, don't mess! */
/** Operation in progress. */
#define VERR_NET_IN_PROGRESS (-436)
/** Operation already in progress. */
#define VERR_NET_ALREADY_IN_PROGRESS (-437)
/** Attempted socket operation with a non-socket handle.
* (This includes closed handles.) */
#define VERR_NET_NOT_SOCKET (-438)
/** Destination address required. */
#define VERR_NET_DEST_ADDRESS_REQUIRED (-439)
/** Message too long. */
#define VERR_NET_MSG_SIZE (-440)
/** Protocol wrong type for socket. */
#define VERR_NET_PROTOCOL_TYPE (-441)
/** Protocol not available. */
#define VERR_NET_PROTOCOL_NOT_AVAILABLE (-442)
/** Protocol not supported. */
#define VERR_NET_PROTOCOL_NOT_SUPPORTED (-443)
/** Socket type not supported. */
#define VERR_NET_SOCKET_TYPE_NOT_SUPPORTED (-444)
/** Operation not supported. */
#define VERR_NET_OPERATION_NOT_SUPPORTED (-445)
/** Protocol family not supported. */
#define VERR_NET_PROTOCOL_FAMILY_NOT_SUPPORTED (-446)
/** Address family not supported by protocol family. */
#define VERR_NET_ADDRESS_FAMILY_NOT_SUPPORTED (-447)
/** Address already in use. */
#define VERR_NET_ADDRESS_IN_USE (-448)
/** Can't assign requested address. */
#define VERR_NET_ADDRESS_NOT_AVAILABLE (-449)
/** Network is down. */
#define VERR_NET_DOWN (-450)
/** Network is unreachable. */
#define VERR_NET_UNREACHABLE (-451)
/** Network dropped connection on reset. */
#define VERR_NET_CONNECTION_RESET (-452)
/** Software caused connection abort. */
#define VERR_NET_CONNECTION_ABORTED (-453)
/** Connection reset by peer. */
#define VERR_NET_CONNECTION_RESET_BY_PEER (-454)
/** No buffer space available. */
#define VERR_NET_NO_BUFFER_SPACE (-455)
/** Socket is already connected. */
#define VERR_NET_ALREADY_CONNECTED (-456)
/** Socket is not connected. */
#define VERR_NET_NOT_CONNECTED (-457)
/** Can't send after socket shutdown. */
#define VERR_NET_SHUTDOWN (-458)
/** Too many references: can't splice. */
#define VERR_NET_TOO_MANY_REFERENCES (-459)
/** Too many references: can't splice. */
#define VERR_NET_CONNECTION_TIMED_OUT (-460)
/** Connection refused. */
#define VERR_NET_CONNECTION_REFUSED (-461)
/* ELOOP is not net. */
/* ENAMETOOLONG is not net. */
/** Host is down. */
#define VERR_NET_HOST_DOWN (-464)
/** No route to host. */
#define VERR_NET_HOST_UNREACHABLE (-465)
/** @} */
/** @name TCP Status Codes
* @{
*/
/** Stop the TCP server. */
#define VERR_TCP_SERVER_STOP (-500)
/** The server was stopped. */
#define VINF_TCP_SERVER_STOP 500
/** @} */
/** @name L4 Specific Status Codes
* @{
*/
/** Invalid offset in an L4 dataspace */
#define VERR_L4_INVALID_DS_OFFSET (-550)
/** IPC error */
#define VERR_IPC (-551)
/** Item already used */
#define VERR_RESOURCE_IN_USE (-552)
/** Source/destination not found */
#define VERR_IPC_PROCESS_NOT_FOUND (-553)
/** Receive timeout */
#define VERR_IPC_RECEIVE_TIMEOUT (-554)
/** Send timeout */
#define VERR_IPC_SEND_TIMEOUT (-555)
/** Receive cancelled */
#define VERR_IPC_RECEIVE_CANCELLED (-556)
/** Send cancelled */
#define VERR_IPC_SEND_CANCELLED (-557)
/** Receive aborted */
#define VERR_IPC_RECEIVE_ABORTED (-558)
/** Send aborted */
#define VERR_IPC_SEND_ABORTED (-559)
/** Couldn't map pages during receive */
#define VERR_IPC_RECEIVE_MAP_FAILED (-560)
/** Couldn't map pages during send */
#define VERR_IPC_SEND_MAP_FAILED (-561)
/** Send pagefault timeout in receive */
#define VERR_IPC_RECEIVE_SEND_PF_TIMEOUT (-562)
/** Send pagefault timeout in send */
#define VERR_IPC_SEND_SEND_PF_TIMEOUT (-563)
/** (One) receive buffer was too small, or too few buffers */
#define VINF_IPC_RECEIVE_MSG_CUT 564
/** (One) send buffer was too small, or too few buffers */
#define VINF_IPC_SEND_MSG_CUT 565
/** Dataspace manager server not found */
#define VERR_L4_DS_MANAGER_NOT_FOUND (-566)
/** @} */
/** @name Loader Status Codes.
* @{
*/
/** Invalid executable signature. */
#define VERR_INVALID_EXE_SIGNATURE (-600)
/** The iprt loader recognized a ELF image, but doesn't support loading it. */
#define VERR_ELF_EXE_NOT_SUPPORTED (-601)
/** The iprt loader recognized a PE image, but doesn't support loading it. */
#define VERR_PE_EXE_NOT_SUPPORTED (-602)
/** The iprt loader recognized a LX image, but doesn't support loading it. */
#define VERR_LX_EXE_NOT_SUPPORTED (-603)
/** The iprt loader recognized a LE image, but doesn't support loading it. */
#define VERR_LE_EXE_NOT_SUPPORTED (-604)
/** The iprt loader recognized a NE image, but doesn't support loading it. */
#define VERR_NE_EXE_NOT_SUPPORTED (-605)
/** The iprt loader recognized a MZ image, but doesn't support loading it. */
#define VERR_MZ_EXE_NOT_SUPPORTED (-606)
/** The iprt loader recognized an a.out image, but doesn't support loading it. */
#define VERR_AOUT_EXE_NOT_SUPPORTED (-607)
/** Bad executable. */
#define VERR_BAD_EXE_FORMAT (-608)
/** Symbol (export) not found. */
#define VERR_SYMBOL_NOT_FOUND (-609)
/** Module not found. */
#define VERR_MODULE_NOT_FOUND (-610)
/** The loader resolved an external symbol to an address to big for the image format. */
#define VERR_SYMBOL_VALUE_TOO_BIG (-611)
/** The image is too big. */
#define VERR_IMAGE_TOO_BIG (-612)
/** The image base address is to high for this image type. */
#define VERR_IMAGE_BASE_TOO_HIGH (-614)
/** The PE loader encountered delayed imports, a feature which hasn't been implemented yet. */
#define VERR_LDRPE_DELAY_IMPORT (-620)
/** The PE loader doesn't have a clue what the security data directory entry is all about. */
#define VERR_LDRPE_SECURITY (-621)
/** The PE loader doesn't know how to deal with the global pointer data directory entry yet. */
#define VERR_LDRPE_GLOBALPTR (-622)
/** The PE loader doesn't support the TLS data directory yet. */
#define VERR_LDRPE_TLS (-623)
/** The PE loader doesn't grok the COM descriptor data directory entry. */
#define VERR_LDRPE_COM_DESCRIPTOR (-624)
#define VERR_LDRPE_LOAD_CONFIG_SIZE (-625)
/** The PE loader encountered a lock prefix table, a feature which hasn't been implemented yet. */
#define VERR_LDRPE_LOCK_PREFIX_TABLE (-626)
/** The ELF loader doesn't handle foreign endianness. */
#define VERR_LDRELF_ODD_ENDIAN (-630)
/** The ELF image is 'dynamic', the ELF loader can only deal with 'relocatable' images at present. */
#define VERR_LDRELF_DYN (-631)
/** The ELF image is 'executable', the ELF loader can only deal with 'relocatable' images at present. */
#define VERR_LDRELF_EXEC (-632)
/** The ELF image was created for an unsupported target machine type. */
#define VERR_LDRELF_MACHINE (-633)
/** The ELF version is not supported. */
#define VERR_LDRELF_VERSION (-634)
/** The ELF loader cannot handle multiple SYMTAB sections. */
#define VERR_LDRELF_MULTIPLE_SYMTABS (-635)
/** The ELF loader encountered a relocation type which is not implemented. */
#define VERR_LDRELF_RELOCATION_NOT_SUPPORTED (-636)
/** The ELF loader encountered a bad symbol index. */
#define VERR_LDRELF_INVALID_SYMBOL_INDEX (-637)
/** The ELF loader encountered an invalid symbol name offset. */
#define VERR_LDRELF_INVALID_SYMBOL_NAME_OFFSET (-638)
/** The ELF loader encountered an invalid relocation offset. */
#define VERR_ELFLDR_INVALID_RELOCATION_OFFSET (-639)
/** @}*/
/** @name Debug Info Reader Status Codes.
* @{
*/
/** The specified segment:offset address was invalid. Typically an attempt at
* addressing outside the segment boundrary. */
#define VERR_DBGMOD_INVALID_ADDRESS (-650)
/** @} */
/** @name Request Packet Status Codes.
* @{
*/
/** Invalid RT request type.
* For the RTReqAlloc() case, the caller just specified an illegal enmType. For
* all the other occurences it means indicates corruption, broken logic, or stupid
* interface user. */
#define VERR_RT_REQUEST_INVALID_TYPE (-700)
/** Invalid RT request state.
* The state of the request packet was not the expected and accepted one(s). Either
* the interface user screwed up, or we've got corruption/broken logic. */
#define VERR_RT_REQUEST_STATE (-701)
/** Invalid RT request packet.
* One or more of the RT controlled packet members didn't contain the correct
* values. Some thing's broken. */
#define VERR_RT_REQUEST_INVALID_PACKAGE (-702)
/** The status field has not been updated yet as the request is still
* pending completion. Someone queried the iStatus field before the request
* has been fully processed. */
#define VERR_RT_REQUEST_STATUS_STILL_PENDING (-703)
/** The request has been freed, don't read the status now.
* Someone is reading the iStatus field of a freed request packet. */
#define VERR_RT_REQUEST_STATUS_FREED (-704)
/** @} */
/* SED-END */
/** @defgroup grp_rt_err_hlp Status Code Helpers
* @ingroup grp_rt_err
* @{
*/
/** @def RT_SUCCESS
* Check for success. We expect success in normal cases, that is the code path depending on
* this check is normally taken. To prevent any prediction use RT_SUCCESS_NP instead.
*
* @returns true if rc indicates success.
* @returns false if rc indicates failure.
*
* @param rc The iprt status code to test.
*/
/** @def RT_SUCCESS_NP
* Check for success. Don't predict the result.
*
* @returns true if rc indicates success.
* @returns false if rc indicates failure.
*
* @param rc The iprt status code to test.
*/
/** @def RT_FAILURE
* Check for failure. We don't expect in normal cases, that is the code path depending on
* this check is normally NOT taken. To prevent any prediction use RT_FAILURE_NP instead.
*
* @returns true if rc indicates failure.
* @returns false if rc indicates success.
*
* @param rc The iprt status code to test.
*/
/** @def RT_FAILURE_NP
* Check for failure. Don't predict the result.
*
* @returns true if rc indicates failure.
* @returns false if rc indicates success.
*
* @param rc The iprt status code to test.
*/
/**
* Converts errno to iprt status code.
*
* @returns iprt status code.
* @param uNativeCode errno code.
*/
/**
* Converts Win32 error code to iprt status code.
*
* Needless to say, this is only available on Win32 targets.
*
* @returns iprt status code.
* @param uNativeCode Win32 error code.
*/
/**
* Converts NT status code to iprt status code.
*
* Needless to say, this is only available on NT and winXX targets.
*
* @returns iprt status code.
* @param lNativeCode NT status code.
*/
/**
* Converts OS/2 error code to iprt status code.
*
* Needless to say, this is only available on OS/2 targets.
*
* @returns iprt status code.
* @param uNativeCode OS/2 error code.
*/
/**
* Converts a L4 errno to a iprt status code.
*
* @returns iprt status code.
* @param uNativeCode l4 errno.
*/
#ifdef IN_RING3
/**
* iprt status code message.
*/
typedef struct RTSTATUSMSG
{
/** Pointer to the short message string. */
const char *pszMsgShort;
/** Pointer to the full message string. */
const char *pszMsgFull;
/** Pointer to the define string. */
const char *pszDefine;
/** Status code number. */
int iCode;
} RTSTATUSMSG;
/** Pointer to iprt status code message. */
typedef RTSTATUSMSG *PRTSTATUSMSG;
/** Pointer to const iprt status code message. */
typedef const RTSTATUSMSG *PCRTSTATUSMSG;
/**
* Get the message structure corresponding to a given iprt status code.
*
* @returns Pointer to read-only message description.
* @param rc The status code.
*/
/**
* Get the define corresponding to a given iprt status code.
*
* @returns Pointer to read-only string with the \#define identifier.
* @param rc The status code.
*/
/**
* Get the short description corresponding to a given iprt status code.
*
* @returns Pointer to read-only string with the description.
* @param rc The status code.
*/
/**
* Get the full description corresponding to a given iprt status code.
*
* @returns Pointer to read-only string with the description.
* @param rc The status code.
*/
#ifdef __WIN__
/**
* Windows error code message.
*/
typedef struct RTWINERRMSG
{
/** Pointer to the full message string. */
const char *pszMsgFull;
/** Pointer to the define string. */
const char *pszDefine;
/** Error code number. */
long iCode;
} RTWINERRMSG;
/** Pointer to Windows error code message. */
typedef RTWINERRMSG *PRTWINERRMSG;
/** Pointer to const Windows error code message. */
typedef const RTWINERRMSG *PCRTWINERRMSG;
/**
* Get the message structure corresponding to a given Windows error code.
*
* @returns Pointer to read-only message description.
* @param rc The status code.
*/
#endif /* __WIN__ */
#endif /* IN_RING3 */
/** @} */
/** @} */
#endif