iom.h revision 021a33be84282e41b811563b5f60f3ada196af3e
/** @file
* IOM - Input / Output Monitor.
*/
/*
* Copyright (C) 2006-2010 Oracle Corporation
*
* This file is part of VirtualBox Open Source Edition (OSE), as
* available from http://www.virtualbox.org. This file is free software;
* General Public License (GPL) as published by the Free Software
* Foundation, in version 2 as it comes in the "COPYING" file of the
* VirtualBox OSE distribution. VirtualBox OSE is distributed in the
* hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
*
* The contents of this file may alternatively be used under the terms
* of the Common Development and Distribution License Version 1.0
* (CDDL) only, as it comes in the "COPYING.CDDL" file of the
* VirtualBox OSE distribution, in which case the provisions of the
* CDDL are applicable instead of those of the GPL.
*
* You may elect to license modified versions of this file under the
* terms and conditions of either the GPL or the CDDL or both.
*/
#ifndef ___VBox_vmm_iom_h
#define ___VBox_vmm_iom_h
/** @defgroup grp_iom The Input / Ouput Monitor API
* @{
*/
/** @def IOM_NO_PDMINS_CHECKS
* Until all devices have been fully adjusted to PDM style, the pPdmIns
* parameter is not checked by IOM.
* @todo Check this again, now.
*/
#define IOM_NO_PDMINS_CHECKS
/**
* Macro for checking if an I/O or MMIO emulation call succeeded.
*
* This macro shall only be used with the IOM APIs where it's mentioned
* in the return value description. And there is must be used to correctly
* determine if the call succeeded and things like the EIP needs updating.
*
*
*
* @param rc The status code. This may be evaluated
* more than once!
*
* @remark To avoid making assumptions about the layout of the
* VINF_EM_FIRST...VINF_EM_LAST range we're checking
* explicitly for each for exach the exceptions.
* However, for efficieny we ASSUME that the
* VINF_EM_LAST is smaller than most of the relevant
* status codes. We also ASSUME that the
* VINF_EM_RESCHEDULE_REM status code is the most
* frequent status code we'll enounter in this range.
*
* @todo Will have to add VINF_EM_DBG_HYPER_BREAKPOINT if the
* I/O port and MMIO breakpoints should trigger before
* the I/O is done. Currently, we don't implement these
* kind of breakpoints.
*/
|| ( (rc) <= VINF_EM_LAST \
&& (rc) != VINF_EM_RESCHEDULE_REM \
&& (rc) >= VINF_EM_FIRST \
&& (rc) != VINF_EM_RESCHEDULE_RAW \
&& (rc) != VINF_EM_RESCHEDULE_HWACC \
) \
)
/**
* Port I/O Handler for IN operations.
*
* @returns VINF_SUCCESS or VINF_EM_*.
* @returns VERR_IOM_IOPORT_UNUSED if the port is really unused and a ~0 value should be returned.
*
* @param pDevIns The device instance.
* @param pvUser User argument.
* @param uPort Port number used for the IN operation.
* @param pu32 Where to store the result. This is always a 32-bit
* variable regardless of what @a cb might say.
* @param cb Number of bytes read.
*/
typedef DECLCALLBACK(int) FNIOMIOPORTIN(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t *pu32, unsigned cb);
/** Pointer to a FNIOMIOPORTIN(). */
typedef FNIOMIOPORTIN *PFNIOMIOPORTIN;
/**
* Port I/O Handler for string IN operations.
*
* @returns VINF_SUCCESS or VINF_EM_*.
* @returns VERR_IOM_IOPORT_UNUSED if the port is really unused and a ~0 value should be returned.
*
* @param pDevIns The device instance.
* @param pvUser User argument.
* @param uPort Port number used for the IN operation.
* @param pGCPtrDst Pointer to the destination buffer (GC, incremented appropriately).
* @param pcTransfers Pointer to the number of transfer units to read, on return remaining transfer units.
* @param cb Size of the transfer unit (1, 2 or 4 bytes).
*/
typedef DECLCALLBACK(int) FNIOMIOPORTINSTRING(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, RTGCPTR *pGCPtrDst, PRTGCUINTREG pcTransfers, unsigned cb);
/** Pointer to a FNIOMIOPORTINSTRING(). */
typedef FNIOMIOPORTINSTRING *PFNIOMIOPORTINSTRING;
/**
* Port I/O Handler for OUT operations.
*
* @returns VINF_SUCCESS or VINF_EM_*.
*
* @param pDevIns The device instance.
* @param pvUser User argument.
* @param uPort Port number used for the OUT operation.
* @param u32 The value to output.
* @param cb The value size in bytes.
*/
typedef DECLCALLBACK(int) FNIOMIOPORTOUT(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb);
/** Pointer to a FNIOMIOPORTOUT(). */
typedef FNIOMIOPORTOUT *PFNIOMIOPORTOUT;
/**
* Port I/O Handler for string OUT operations.
*
* @returns VINF_SUCCESS or VINF_EM_*.
*
* @param pDevIns The device instance.
* @param pvUser User argument.
* @param uPort Port number used for the OUT operation.
* @param pGCPtrSrc Pointer to the source buffer (GC, incremented appropriately).
* @param pcTransfers Pointer to the number of transfer units to write, on return remaining transfer units.
* @param cb Size of the transfer unit (1, 2 or 4 bytes).
*/
typedef DECLCALLBACK(int) FNIOMIOPORTOUTSTRING(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, RTGCPTR *pGCPtrSrc, PRTGCUINTREG pcTransfers, unsigned cb);
/** Pointer to a FNIOMIOPORTOUTSTRING(). */
typedef FNIOMIOPORTOUTSTRING *PFNIOMIOPORTOUTSTRING;
/**
* Memory mapped I/O Handler for read operations.
*
* @returns VBox status code.
*
* @param pDevIns The device instance.
* @param pvUser User argument.
* @param GCPhysAddr Physical address (in GC) where the read starts.
* @param pv Where to store the result.
* @param cb Number of bytes read.
*
* @remark wonder if we could merge the IOMMMIO* and IOMPORT* callbacks...
*/
typedef DECLCALLBACK(int) FNIOMMMIOREAD(PPDMDEVINS pDevIns, void *pvUser, RTGCPHYS GCPhysAddr, void *pv, unsigned cb);
/** Pointer to a FNIOMMMIOREAD(). */
typedef FNIOMMMIOREAD *PFNIOMMMIOREAD;
/**
* Port I/O Handler for write operations.
*
* @returns VBox status code.
*
* @param pDevIns The device instance.
* @param pvUser User argument.
* @param GCPhysAddr Physical address (in GC) where the read starts.
* @param pv Where to fetch the result.
* @param cb Number of bytes to write.
*
* @remark wonder if we could merge the IOMMMIO* and IOMPORT* callbacks...
*/
typedef DECLCALLBACK(int) FNIOMMMIOWRITE(PPDMDEVINS pDevIns, void *pvUser, RTGCPHYS GCPhysAddr, void *pv, unsigned cb);
/** Pointer to a FNIOMMMIOWRITE(). */
typedef FNIOMMMIOWRITE *PFNIOMMMIOWRITE;
/**
* Port I/O Handler for memset operations, actually for REP STOS* instructions handling.
*
* @returns VBox status code.
*
* @param pDevIns The device instance.
* @param pvUser User argument.
* @param GCPhysAddr Physical address (in GC) where the write starts.
* @param cbItem Size of data in u32Item parameter, restricted to 1/2/4 bytes.
* @param cItems Number of iterations.
*/
typedef DECLCALLBACK(int) FNIOMMMIOFILL(PPDMDEVINS pDevIns, void *pvUser, RTGCPHYS GCPhysAddr, uint32_t u32Item, unsigned cbItem, unsigned cItems);
/** Pointer to a FNIOMMMIOFILL(). */
typedef FNIOMMMIOFILL *PFNIOMMMIOFILL;
VMMDECL(VBOXSTRICTRC) IOMIOPortReadString(PVM pVM, RTIOPORT Port, PRTGCPTR pGCPtrDst, PRTGCUINTREG pcTransfers, unsigned cb);
VMMDECL(VBOXSTRICTRC) IOMIOPortWriteString(PVM pVM, RTIOPORT Port, PRTGCPTR pGCPtrSrc, PRTGCUINTREG pcTransfers, unsigned cb);
VMMDECL(VBOXSTRICTRC) IOMInterpretINSEx(PVM pVM, PCPUMCTXCORE pRegFrame, uint32_t uPort, uint32_t uPrefix, uint32_t cbTransfer);
VMMDECL(VBOXSTRICTRC) IOMInterpretOUTSEx(PVM pVM, PCPUMCTXCORE pRegFrame, uint32_t uPort, uint32_t uPrefix, uint32_t cbTransfer);
VMMDECL(VBOXSTRICTRC) IOMMMIOPhysHandler(PVM pVM, RTGCUINT uErrorCode, PCPUMCTXCORE pCtxCore, RTGCPHYS GCPhysFault);
VMMDECL(VBOXSTRICTRC) IOMInterpretCheckPortIOAccess(PVM pVM, PCPUMCTXCORE pCtxCore, RTIOPORT Port, unsigned cb);
VMMDECL(int) IOMMMIOMapMMIO2Page(PVM pVM, RTGCPHYS GCPhys, RTGCPHYS GCPhysRemapped, uint64_t fPageFlags);
#ifdef IN_RC
/** @defgroup grp_iom_gc The IOM Guest Context API
* @ingroup grp_iom
* @{
*/
/** @} */
#endif /* IN_RC */
#ifdef IN_RING3
/** @defgroup grp_iom_r3 The IOM Host Context Ring-3 API
* @ingroup grp_iom
* @{
*/
VMMR3DECL(int) IOMR3IOPortRegisterR3(PVM pVM, PPDMDEVINS pDevIns, RTIOPORT PortStart, RTUINT cPorts, RTHCPTR pvUser,
R3PTRTYPE(PFNIOMIOPORTOUTSTRING) pfnOutStringCallback, R3PTRTYPE(PFNIOMIOPORTINSTRING) pfnInStringCallback,
const char *pszDesc);
VMMR3DECL(int) IOMR3IOPortRegisterRC(PVM pVM, PPDMDEVINS pDevIns, RTIOPORT PortStart, RTUINT cPorts, RTRCPTR pvUser,
RCPTRTYPE(PFNIOMIOPORTOUTSTRING) pfnOutStrCallback, RCPTRTYPE(PFNIOMIOPORTINSTRING) pfnInStrCallback,
const char *pszDesc);
VMMR3DECL(int) IOMR3IOPortRegisterR0(PVM pVM, PPDMDEVINS pDevIns, RTIOPORT PortStart, RTUINT cPorts, RTR0PTR pvUser,
R0PTRTYPE(PFNIOMIOPORTOUTSTRING) pfnOutStrCallback, R0PTRTYPE(PFNIOMIOPORTINSTRING) pfnInStrCallback,
const char *pszDesc);
VMMR3DECL(int) IOMR3IOPortDeregister(PVM pVM, PPDMDEVINS pDevIns, RTIOPORT PortStart, RTUINT cPorts);
VMMR3_INT_DECL(int) IOMR3MmioRegisterR3(PVM pVM, PPDMDEVINS pDevIns, RTGCPHYS GCPhysStart, RTUINT cbRange, RTHCPTR pvUser,
VMMR3_INT_DECL(int) IOMR3MmioRegisterR0(PVM pVM, PPDMDEVINS pDevIns, RTGCPHYS GCPhysStart, RTUINT cbRange, RTR0PTR pvUser,
VMMR3_INT_DECL(int) IOMR3MmioRegisterRC(PVM pVM, PPDMDEVINS pDevIns, RTGCPHYS GCPhysStart, RTUINT cbRange, RTGCPTR pvUser,
VMMR3_INT_DECL(int) IOMR3MmioDeregister(PVM pVM, PPDMDEVINS pDevIns, RTGCPHYS GCPhysStart, RTUINT cbRange);
/** @} */
#endif /* IN_RING3 */
/** @} */
#endif