test/TEST-01-BASIC/test.sh

	test.sh revision 71dc3ed1d95dfe246004018c2ca85156fc73c146
#!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
TEST_DESCRIPTION="Basic systemd setup"

KVERSION=${KVERSION-$(uname -r)}
KERNEL_VER=$(uname -r)

# Uncomment this to debug failures
#DEBUGFAIL="systemd.unit=multi-user.target"
DEBUGTOOLS="df free ls stty cat ps ln ip route dmesg dhclient mkdir cp ping dhclient strace less grep id tty touch du sort"

run_qemu() {
    # TODO: qemu wrapper script: http://www.spinics.net/lists/kvm/msg72389.html
    qemu-kvm \
        -hda $TESTDIR/rootdisk.img \
        -m 512M -nographic \
        -net none -kernel /boot/vmlinuz-$KERNEL_VER \
        -append "root=/dev/sda1 systemd.log_level=debug raid=noautodetect loglevel=2 init=/usr/lib/systemd/systemd ro console=ttyS0,115200n81 selinux=0 $DEBUGFAIL" || return 1

    ret=1
    mkdir -p $TESTDIR/root
    mount ${LOOPDEV}p1 $TESTDIR/root
    [[ -e $TESTDIR/root/testok ]] && ret=0
    cp -a $TESTDIR/root/failed $TESTDIR
    cp -a $TESTDIR/root/var/log/journal $TESTDIR
    umount $TESTDIR/root
    cat $TESTDIR/failed
    ls -l $TESTDIR/journal/*/*.journal
    test -s $TESTDIR/failed && ret=$(($ret+1))
    return $ret
}


run_nspawn() {
    systemd-nspawn -b -D $TESTDIR/nspawn-root --capability=CAP_AUDIT_CONTROL,CAP_AUDIT_WRITE /usr/lib/systemd/systemd
    ret=1
    [[ -e $TESTDIR/nspawn-root/testok ]] && ret=0
    cp -a $TESTDIR/nspawn-root/failed $TESTDIR
    cp -a $TESTDIR/nspawn-root/var/log/journal $TESTDIR
    cat $TESTDIR/failed
    ls -l $TESTDIR/journal/*/*.journal
    test -s $TESTDIR/failed && ret=$(($ret+1))
    return $ret
}


test_run() {
    if check_qemu ; then
        run_qemu || return 1
    else
        dwarn "can't run qemu-kvm, skipping"
    fi
    if check_nspawn; then
        run_nspawn || return 1
    else
        dwarn "can't run systemd-nspawn, skipping"
    fi
    return 0
}

test_setup() {
    rm -f $TESTDIR/rootdisk.img
    # Create the blank file to use as a root filesystem
    dd if=/dev/null of=$TESTDIR/rootdisk.img bs=1M seek=200
    LOOPDEV=$(losetup --show -P -f $TESTDIR/rootdisk.img)
    [ -b $LOOPDEV ] || return 1
    echo "LOOPDEV=$LOOPDEV" >> $STATEFILE
    sfdisk -C 6400 -H 2 -S 32 -L $LOOPDEV <<EOF
,3200
,
EOF

    mkfs.ext3 -L systemd ${LOOPDEV}p1
    echo -n test >$TESTDIR/keyfile
    mkdir -p $TESTDIR/root
    mount ${LOOPDEV}p1 $TESTDIR/root
    mkdir -p $TESTDIR/root/run

    # Create what will eventually be our root filesystem onto an overlay
    (
        LOG_LEVEL=5
        initdir=$TESTDIR/root

        # create the basic filesystem layout
        setup_basic_dirs

        # install compiled files
        (cd ../..; make DESTDIR=$initdir install)

        # remove unneeded documentation
        rm -fr $initdir/usr/share/{man,doc,gtk-doc}

        # install possible missing libraries
        for i in $initdir/{sbin,bin}/* $initdir/lib/systemd/*; do
            inst_libs $i
        done

        # make a journal directory
        mkdir -p $initdir/var/log/journal

        # install some basic config files
        inst /etc/sysconfig/init
        inst /etc/passwd
        inst /etc/shadow
        inst /etc/group
        inst /etc/shells
        inst /etc/nsswitch.conf
        inst /etc/pam.conf
        inst /etc/securetty
        inst /etc/os-release
        inst /etc/localtime
        # we want an empty environment
        > $initdir/etc/environment
        > $initdir/etc/machine-id

        # set the hostname
        echo  systemd-testsuite > $initdir/etc/hostname

        eval $(udevadm info --export --query=env --name=${LOOPDEV}p2)

        cat >$initdir/etc/fstab <<EOF
LABEL=systemd           /       ext3    rw 0 1
EOF

        # setup the testsuite target
        cat >$initdir/etc/systemd/system/testsuite.target <<EOF
[Unit]
Description=Testsuite target
Requires=multi-user.target
After=multi-user.target
Conflicts=rescue.target
AllowIsolate=yes
EOF

        # setup the testsuite service
        cat >$initdir/etc/systemd/system/testsuite.service <<EOF
[Unit]
Description=Testsuite service
After=multi-user.target

[Service]
ExecStart=/bin/bash -c 'set -x; systemctl --failed --no-legend --no-pager > /failed ; echo OK > /testok; while : ;do echo "testsuite service waiting for journal to move to /var/log/journal" > /dev/console ; for i in /var/log/journal/*;do [ -d "\$i" ] && echo "\$i" && break 2; done; sleep 1; done; sleep 1; exit 0;'
ExecStopPost=/usr/bin/systemctl poweroff
Type=oneshot
EOF
        mkdir -p $initdir/etc/systemd/system/testsuite.target.wants
        ln -fs ../testsuite.service $initdir/etc/systemd/system/testsuite.target.wants/testsuite.service

        # make the testsuite the default target
        ln -fs testsuite.target $initdir/etc/systemd/system/default.target
        mkdir -p $initdir/etc/rc.d
        cat >$initdir/etc/rc.d/rc.local <<EOF
#!/bin/bash
exit 0
EOF
        chmod 0755 $initdir/etc/rc.d/rc.local
        # install basic tools needed
        dracut_install sh bash setsid loadkeys setfont \
            login sushell sulogin gzip sleep echo mount umount cryptsetup
        dracut_install dmsetup modprobe

        # install libnss_files for login
        inst_libdir_file "libnss_files*"

        # install dbus and pam
        find \
            /etc/dbus-1 \
            /etc/pam.d \
            /etc/security \
            /lib64/security \
            /lib/security -xtype f \
            | while read file; do
            inst $file
        done

        # install dbus socket and service file
        inst /usr/lib/systemd/system/dbus.socket
        inst /usr/lib/systemd/system/dbus.service

        # install basic keyboard maps and fonts
        for i in \
            /usr/lib/kbd/consolefonts/latarcyrheb-sun16* \
            /usr/lib/kbd/keymaps/include/* \
            /usr/lib/kbd/keymaps/i386/include/* \
            /usr/lib/kbd/keymaps/i386/qwerty/us.*; do
                [[ -f $i ]] || continue
                inst $i
        done

        # some basic terminfo files
        for _terminfodir in /lib/terminfo /etc/terminfo /usr/share/terminfo; do
            [ -f ${_terminfodir}/l/linux ] && break
        done
        dracut_install -o ${_terminfodir}/l/linux

        # softlink mtab
        ln -fs /proc/self/mounts $initdir/etc/mtab

        # install any Exec's from the service files
        egrep -ho '^Exec[^ ]*=[^ ]+' $initdir/lib/systemd/system/*.service \
            | while read i; do
            i=${i##Exec*=}; i=${i##-}
            inst $i
        done

        # install plymouth, if found... else remove plymouth service files
        # if [ -x /usr/libexec/plymouth/plymouth-populate-initrd ]; then
        #     PLYMOUTH_POPULATE_SOURCE_FUNCTIONS="$TEST_BASE_DIR/test-functions" \
        #         /usr/libexec/plymouth/plymouth-populate-initrd -t $initdir
        #         dracut_install plymouth plymouthd
        # else
        rm -f $initdir/{usr/lib,etc}/systemd/system/plymouth* $initdir/{usr/lib,etc}/systemd/system/*/plymouth*
        # fi

        # some helper tools for debugging
        [[ $DEBUGTOOLS ]] && dracut_install $DEBUGTOOLS

        # install ld.so.conf* and run ldconfig
        cp -a /etc/ld.so.conf* $initdir/etc
        ldconfig -r "$initdir"
        ddebug "Strip binaeries"
        find "$initdir" -perm +111 -type f | xargs strip --strip-unneeded | ddebug

        # copy depmod files
        inst /lib/modules/$KERNEL_VER/modules.order
        inst /lib/modules/$KERNEL_VER/modules.builtin
        # generate module dependencies
        if [[ -d $initdir/lib/modules/$KERNEL_VER ]] && \
            ! depmod -a -b "$initdir" $KERNEL_VER; then
                dfatal "\"depmod -a $KERNEL_VER\" failed."
                exit 1
        fi
    )
    rm -fr $TESTDIR/nspawn-root
    ddebug "cp -ar $TESTDIR/root $TESTDIR/nspawn-root"
    cp -ar $TESTDIR/root $TESTDIR/nspawn-root
    # we don't mount in the nspawn root
    rm -fr $TESTDIR/nspawn-root/etc/fstab

    ddebug "umount $TESTDIR/root"
    umount $TESTDIR/root
}

test_cleanup() {
    umount $TESTDIR/root 2>/dev/null
    [[ $LOOPDEV ]] && losetup -d $LOOPDEV
    return 0
}

. $TEST_BASE_DIR/test-functions
do_test "$@"