#compdef systemctl loginctl journalctl hostnamectl localectl timedatectl systemd-coredumpctl udevadm systemd-analyze systemd-cat systemd-ask-password systemd-cgls systemd-cgtop systemd-delta systemd-detect-virt systemd-inhibit systemd-machine-id-setup systemd-notify systemd-nspawn systemd-tmpfiles systemd-tty-ask-password-agent

_ctls()

{

local curcontext="$curcontext" state lstate line

case "$service" in

systemctl)

# -s for aggregated options like -aP

_arguments -s \

{-h,--help}'[Show help]' \

'--version[Show package version]' \

{-t,--type=}'[List only units of a particular type]:unit type:(automount device mount path service snapshot socket swap target timer)' \

\*{-p,--property=}'[Show only properties by specific name]:unit property' \

{-a,--all}'[Show all units/properties, including dead/empty ones]' \

'--failed[Show only failed units]' \

"--full[Don't ellipsize unit names on output]" \

'--fail[When queueing a new job, fail if conflicting jobs are pending]' \

'--ignore-dependencies[When queueing a new job, ignore all its dependencies]' \

'--kill-who=[Who to send signal to]:killwho:(main control all)' \

{-s,--signal=}'[Which signal to send]:signal:_signals' \

{-H,--host=}'[Show information for remote host]:userathost:_hosts_or_user_at_host' \

{-P,--privileged}'[Acquire privileges before execution]' \

{-q,--quiet}'[Suppress output]' \

'--no-block[Do not wait until operation finished]' \

"--no-wall[Don't send wall message before halt/power-off/reboot]" \

"--no-reload[When enabling/disabling unit files, don't reload daemon configuration]" \

'--no-legend[Do not print a legend, i.e. the column headers and the footer with hints]' \

'--no-pager[Do not pipe output into a pager]' \

'--no-ask-password[Do not ask for system passwords]' \

'--order[When generating graph for dot, show only order]' \

'--require[When generating graph for dot, show only requirement]' \

'--system[Connect to system manager]' \

'--user[Connect to user service manager]' \

'--global[Enable/disable unit files globally]' \

{-f,--force}'[When enabling unit files, override existing symlinks. When shutting down, execute action immediately]' \

'--root=[Enable unit files in the specified root directory]:directory:_directories' \

'--runtime[Enable unit files only temporarily until next reboot]' \

{-n,--lines=}'[Journal entries to show]:number of entries' \

{-o,--output=}'[Change journal output mode]:modes:_outputmodes' \

'*::systemctl command:_systemctl_command'

;;

loginctl)

_arguments -s \

{-h,--help}'[Show help]' \

'--version[Show package version]' \

\*{-p,--property=}'[Show only properties by this name]:unit property' \

{-a,--all}'[Show all properties, including empty ones]' \

'--kill-who=[Who to send signal to]:killwho:(main control all)' \

{-s,--signal=}'[Which signal to send]:signal:_signals' \

'--no-ask-password[Do not ask for system passwords]' \

{-H,--host=}'[Show information for remote host]:userathost:_hosts_or_user_at_host' \

{-P,--privileged}'[Acquire privileges before execution]' \

'--no-pager[Do not pipe output into a pager]' \

'*::loginctl command:_loginctl_command'

;;

hostnamectl)

_arguments -s \

{-h,--help}'[Show this help]' \

'--version[Show package version]' \

'--transient[Only set transient hostname]' \

'--static[Only set static hostname]' \

'--pretty[Only set pretty hostname]' \

'--no-ask-password[Do not prompt for password]' \

{-H,--host=}'[Operate on remote host]:userathost:_hosts_or_user_at_host' \

'*::hostnamectl commands:_hostnamectl_command'

;;

journalctl)

_arguments -s \

'--since=[Start showing entries newer or of the specified date]:YYYY-MM-DD HH\:MM\:SS' \

'--until=[Stop showing entries older or of the specified date]:YYYY-MM-DD HH\:MM\:SS' \

{-c,--cursor=}'[Start showing entries from specified cursor]:cursors:_journal_fields __CURSORS' \

{-b,--this-boot}'[Show data only from current boot]' \

{-u,--unit=}'[Show data only from the specified unit]:units:_journal_fields _SYSTEMD_UNIT' \

{-p,--priority=}'[Show only messages within the specified priority range]:priority:_journal_fields PRIORITY' \

{-f,--follow}'[Follow journal]' \

{-n,--lines=}'[Number of journal entries to show]:integer' \

'--no-tail[Show all lines, even in follow mode]' \

{-o,--output=}'[Change journal output mode]:output modes:_outputmodes' \

{--full}'[Show long fields in full]' \

{-a,--all}'[Show all fields, including long and unprintable]' \

{-q,--quiet}"[Don't show privilege warning]" \

'--no-pager[Do not pipe output into a pager]' \

{-m,--merge}'[Show entries from all available journals]' \

{-D,--directory=}'[Show journal files from directory]:directories:_directories' \

'--interval=[Time interval for changing the FSS sealing key]:time interval' \

'--verify-key=[Specify FSS verification key]:FSS key' \

{-h,--help}'[Show this help]' \

'--version[Show package version]' \

'--new-id128[Generate a new 128 Bit ID]' \

'--header[Show journal header information]' \

'--disk-usage[Show total disk usage]' \

{-F,--field=}'[List all values a certain field takes]:Fields:_list_fields' \

'--setup-keys[Generate new FSS key pair]' \

'--verify[Verify journal file consistency]' \

'--list-catalog[List messages in catalog]' \

'--update-catalog[Update binary catalog database]' \

;;

localectl)

_arguments \

{-h,--help}'[Show this help]' \

'--version[Show package version]' \

"--no-convert[Don't convert keyboard mappings]" \

'--no-pager[Do not pipe output into a pager]' \

'--no-ask-password[Do not prompt for password]' \

{-H,--host=}'[Operate on remote host]:userathost:_hosts_or_user_at_host' \

'*::localectl commands:_localectl_command'

;;

systemd-coredumpctl)

_arguments \

{-o,--output=}'[Write output to FILE]:output file:_files' \

'--no-pager[Do not pipe output into a pager]' \

{-h,--help}'[Show this help]' \

'--version[Show package version]' \

'*::systemd-coredumpctl commands:_systemd-coredumpctl_command'

;;

timedatectl)

_arguments -s \

{-h,--help}'[Show this help]' \

'--version[Show package version]' \

'--adjust-system-clock[Adjust system clock when changing local RTC mode]' \

'--no-pager[Do not pipe output into a pager]' \

'--no-ask-password[Do not prompt for password]' \

{-H,--host=}'[Operate on remote host]:userathost:_hosts_or_user_at_host' \

'*::timedatectl commands:_timedatectl_command'

;;

udevadm)

_arguments \

'--debug[Print debug messages to stderr]' \

'--version[Print version number]' \

'--help[Print help text]' \

'*::udevadm commands:_udevadm_command'

;;

systemd-analyze)

_arguments \

{-h,--help}'[Show help text.]' \

'--user[Shows performance data of user sessions instead of the system manager.]' \

'*::systemd-analyze commands:_systemd_analyze_command'

;;

systemd-ask-password)

_arguments \

{-h,--help}'[Show this help]' \

'--icon=[Icon name]' \

'--timeout=[Timeout in sec]' \

'--no-tty[Ask question via agent even on TTY]' \

'--accept-cached[Accept cached passwords]' \

'--multiple[List multiple passwords if available]'

;;

systemd-cat)

_arguments \

{-h,--help}'[Show this help]' \

'--version[Show package version.]' \

{-t,--identifier=}'[Set syslog identifier.]' \

{-p,--priority=}'[Set priority value.]:value:({0..7})' \

'--level-prefix=[Control whether level prefix shall be parsed.]:boolean:(1 0)' \

':Message'

;;

systemd-cgls)

_arguments \

{-h,--help}'[Show this help]' \

'--version[Show package version]' \

'--no-pager[Do not pipe output into a pager]' \

{-a,--all}'[Show all groups, including empty]' \

'-k[Include kernel threads in output]' \

':cgroups:(cpuset cpu cpuacct memory devices freezer net_cls blkio)'

;;

systemd-cgtop)

_arguments \

{-h,--help}'[Show this help]' \

'--version[Print version and exit]' \

'(-c -m -i -t)-p[Order by path]' \

'(-c -p -m -i)-t[Order by number of tasks]' \

'(-m -p -i -t)-c[Order by CPU load]' \

'(-c -p -i -t)-m[Order by memory load]' \

'(-c -m -p -t)-i[Order by IO load]' \

{-d,--delay=}'[Specify delay]' \

{-n,--iterations=}'[Run for N iterations before exiting]' \

{-b,--batch}'[Run in batch mode, accepting no input]' \

'--depth=[Maximum traversal depth]'

;;

systemd-delta)

_arguments \

{-h,--help}'[Show this help]' \

'--version[Show package version]' \

'--no-pager[Do not pipe output into a pager]' \

'--diff=[Show a diff when overridden files differ]:boolean:(1 0)' \

{-t,--type=}'[Only display a selected set of override types]:types:(masked equivalent redirected overridden unchanged)' \

':SUFFIX:(tmpfiles.d sysctl.d systemd/system)'

;;

systemd-detect-virt)

_arguments \

{-h,--help}'[Show this help]' \

'--version[Show package version]' \

{-c,--container}'[Only detect whether we are run in a container]' \

{-v,--vm}'[Only detect whether we are run in a VM]' \

{-q,--quiet}"[Don't output anything, just set return value]"

;;

systemd-inhibit)

_arguments \

{-h,--help}'[Show this help]' \

'--version[Show package version]' \

'--what=[Operations to inhibit]:options:(shutdown sleep idle handle-power-key handle-suspend-key handle-hibernate-key handle-lid-switch)' \

'--who=[A descriptive string who is inhibiting]' \

'--why=[A descriptive string why is being inhibited]' \

'--mode=[One of block or delay]' \

'--list[List active inhibitors]' \

'*:commands:_systemd_inhibit_command'

;;

systemd-machine-id-setup)

_arguments \

{-h,--help}'[Show this help]' \

'--version[Show package version]'

;;

systemd-notify)

_arguments \

{-h,--help}'[Show this help]' \

'--version[Show package version]' \

'--ready[Inform the init system about service start-up completion.]' \

'--pid=[Inform the init system about the main PID of the daemon]' \

'--status=[Send a free-form status string for the daemon to the init systemd]' \

'--booted[Returns 0 if the system was booted up with systemd]' \

'--readahead=[Controls disk read-ahead operations]:arguments:(cancel done noreply)'

;;

systemd-nspawn)

_arguments \

{-h,--help}'[Show this help]' \

{--directory=,-D}'[Directory to use as file system root for the namespace container. If omitted the current directory will be used.]:directories:_directories' \

{--boot,-b}'[Automatically search for an init binary and invoke it instead of a shell or a user supplied program.]' \

{--user=,-u}'[Run the command under specified user, create home directory and cd into it.]' \

'--uuid=[Set the specified uuid for the container.]' \

{--controllers=,-C}'[Makes the container appear in other hierarchies than the name=systemd:/ one. Takes a comma-separated list of controllers.]' \

'--private-network[Turn off networking in the container. This makes all network interfaces unavailable in the container, with the exception of the loopback device.]' \

'--read-only[Mount the root file system read only for the container.]' \

'--capability=[List one or more additional capabilities to grant the container.]:capabilities:_systemd-nspawn' \

"--link-journal=[Control whether the container's journal shall be made visible to the host system.]:options:(no, host, guest, auto)" \

'-j[Equivalent to --link-journal=guest.]'

;;

systemd-tmpfiles)

_arguments \

'--create[Create, set ownership/permissions based on the config files.]' \

'--clean[Clean up all files and directories with an age parameter configured.]' \

'--remove[All files and directories marked with r, R in the configuration files are removed.]' \

'--prefix=[Only apply rules that apply to paths with the specified prefix.]' \

'--help[Prints a short help text and exits.]' \

'*::files:_files'

;;

systemd-tty-ask-password-agent)

_arguments \

{-h,--help}'[Prints a short help text and exits.]' \

'--version[Prints a short version string and exits.]' \

'--list[Lists all currently pending system password requests.]' \

'--query[Process all currently pending system password requests by querying the user on the calling TTY.]' \

'--watch[Continuously process password requests.]' \

'--wall[Forward password requests to wall(1).]' \

'--plymouth[Ask question with plymouth(8).]' \

'--console[Ask question on /dev/console.]'

;;

*) _message 'eh?' ;;

esac

}

_systemd-nspawn(){

local -a _caps

_caps=( CAP_CHOWN CAP_DAC_OVERRIDE CAP_DAC_READ_SEARCH

CAP_FOWNER CAP_FSETID CAP_IPC_OWNER CAP_KILL CAP_LEASE CAP_LINUX_IMMUTABLE

CAP_NET_BIND_SERVICE CAP_NET_BROADCAST CAP_NET_RAW CAP_SETGID CAP_SETFCAP CAP_SETPCAP

CAP_SETUID CAP_SYS_ADMIN CAP_SYS_CHROOT CAP_SYS_NICE CAP_SYS_PTRACE CAP_SYS_TTY_CONFIG

CAP_SYS_RESOURCE CAP_SYS_BOOT )

_values -s , 'capabilities' "$_caps[@]"

}

_systemd_inhibit_command(){

if (( CURRENT == 1 )); then

compset -q

_normal

else

local n=${words[(b:2:i)[^-]*]}

if (( n <= CURRENT )); then

compset -n $n

_alternative \

'files:file:_files' \

'commands:command:_normal' && return 0

fi

_default

fi

}

_systemd_analyze_command(){

local -a _systemd_analyze_cmds

_systemd_analyze_cmds=(

'time:Print the time taken to start'

'blame:prints a list of all running units, ordered by the time they took to initialize'

'plot:prints an SVG graphic detailing which system services have been started at what time'

)

if (( CURRENT == 1 )); then

_describe "options" _systemd_analyze_cmds

else

_message "no more options"

fi

}

_hosts_or_user_at_host()

{

_alternative \

'users-hosts:: _user_at_host' \

'hosts:: _hosts'

}

_outputmodes() {

local -a _output_opts

_output_opts=(short short-monotonic verbose export json json-pretty json-see cat)

_describe -t output 'output mode' _output_opts || compadd "$@"

}

(( $+functions[_systemctl_command] )) || _systemctl_command()

{

local -a _systemctl_cmds

_systemctl_cmds=(

"list-units:List units"

"start:Start (activate) one or more units"

"stop:Stop (deactivate) one or more units"

"reload:Reload one or more units"

"restart:Start or restart one or more units"

"condrestart:Restart one or more units if active"

"try-restart:Restart one or more units if active"

"reload-or-restart:Reload one or more units is possible, otherwise start or restart"

"force-reload:Reload one or more units is possible, otherwise restart if active"

"reload-or-try-restart:Reload one or more units is possible, otherwise restart if active"

"isolate:Start one unit and stop all others"

"kill:Send signal to processes of a unit"

"is-active:Check whether units are active"

"status:Show runtime status of one or more units"

"show:Show properties of one or more units/jobs or the manager"

"reset-failed:Reset failed state for all, one, or more units"

"load:Load one or more units"

"list-unit-files:List installed unit files"

"enable:Enable one or more unit files"

"disable:Disable one or more unit files"

"reenable:Reenable one or more unit files"

"preset:Enable/disable one or more unit files based on preset configuration"

"mask:Mask one or more units"

"unmask:Unmask one or more units"

"link:Link one or more units files into the search path"

"is-enabled:Check whether unit files are enabled"

"list-jobs:List jobs"

"cancel:Cancel all, one, or more jobs"

"dump:Dump server status"

"dot:Dump dependency graph for dot(1)"

"snapshot:Create a snapshot"

"delete:Remove one or more snapshots"

"show-environment:Dump environment"

"set-environment:Set one or more environment variables"

"unset-environment:Unset one or more environment variables"

"daemon-reload:Reload systemd manager configuration"

"daemon-reexec:Reexecute systemd manager"

"default:Enter system default mode"

"rescue:Enter system rescue mode"

"emergency:Enter system emergency mode"

"halt:Shut down and halt the system"

"suspend:Suspend the system"

"poweroff:Shut down and power-off the system"

"reboot:Shut down and reboot the system"

"kexec:Shut down and reboot the system with kexec"

"exit:Ask for user instance termination"

)

if (( CURRENT == 1 )); then

_describe -t commands 'systemctl command' _systemctl_cmds || compadd "$@"

else

local curcontext="$curcontext"

cmd="${${_systemctl_cmds[(r)$words[1]:*]%%:*}}"

# Deal with any aliases

case $cmd in

condrestart) cmd="try-restart";;

force-reload) cmd="reload-or-try-restart";;

esac

if (( $#cmd )); then

curcontext="${curcontext%:*:*}:systemctl-${cmd}:"

local update_policy

zstyle -s ":completion:${curcontext}:" cache-policy update_policy

if [[ -z "$update_policy" ]]; then

zstyle ":completion:${curcontext}:" cache-policy _systemctl_caching_policy

fi

_call_function ret _systemctl_$cmd || _message 'no more arguments'

else

_message "unknown systemctl command: $words[1]"

fi

return ret

fi

}

__systemctl()

{

systemctl --full --no-legend --no-pager "$@"

}

# Fills the unit list

_systemctl_all_units()

{

if ( [[ ${+_sys_all_units} -eq 0 ]] || _cache_invalid SYS_ALL_UNITS ) &&

! _retrieve_cache SYS_ALL_UNITS;

then

_sys_all_units=( $(__systemctl list-units --all | { while read a b; do echo "$a"; done; }) )

_store_cache SYS_ALL_UNITS _sys_all_units

fi

}

# Fills the unit list including all file units

_systemctl_really_all_units()

{

local -a all_unit_files;

local -a really_all_units;

if ( [[ ${+_sys_really_all_units} -eq 0 ]] || _cache_invalid SYS_REALLY_ALL_UNITS ) &&

! _retrieve_cache SYS_REALLY_ALL_UNITS;

then

all_unit_files=( $(__systemctl list-unit-files | { while read a b; do echo "$a"; done; }) )

_systemctl_all_units

really_all_units=($_sys_all_units $all_unit_files)

_sys_really_all_units=(${(u)really_all_units})

_store_cache SYS_REALLY_ALL_UNITS _sys_really_all_units

fi

}

_filter_units_by_property() {

local property=$1 value=$2 ; shift ; shift

local -a units ; units=($*)

local prop unit

for ((i=1; $i <= ${#units[*]}; i++)); do

# FIXME: "Failed to issue method call: Unknown unit" errors are ignored for

# now (related to DBUS_ERROR_UNKNOWN_OBJECT). in the future, we need to

# revert to calling 'systemctl show' once for all units, which is way

# faster

unit=${units[i]}

prop=${(f)"$(_call_program units "$service show --no-pager --property="$property" ${unit} 2>/dev/null")"}

if [[ "${prop}" = "$property=$value" ]]; then

echo "${unit}"

fi

done

}

_systemctl_active_units() {_sys_active_units=( $(__systemctl list-units | { while read a b; do echo "$a"; done; }) )}

_systemctl_inactive_units(){_sys_inactive_units=($(__systemctl list-units --all | { while read a b c d; do [[ $c == "inactive" ]] && echo "$a"; done; }) )}

_systemctl_failed_units() {_sys_failed_units=( $(__systemctl list-units --failed | { while read a b; do echo "$a"; done; }) )}

_systemctl_enabled_units() {_sys_enabled_units=( $(__systemctl list-unit-files | { while read a b; do [[ $b == "enabled" ]] && echo "$a"; done; }) )}

_systemctl_disabled_units(){_sys_disabled_units=($(__systemctl list-unit-files | { while read a b; do [[ $b == "disabled" ]] && echo "$a"; done; }) )}

_systemctl_masked_units() {_sys_masked_units=( $(__systemctl list-unit-files | { while read a b; do [[ $b == "masked" ]] && echo "$a"; done; }) )}

# Completion functions for ALL_UNITS

for fun in is-active is-enabled status show mask preset ; do

(( $+functions[_systemctl_$fun] )) || _systemctl_$fun()

{

_systemctl_really_all_units

compadd "$@" -a - _sys_really_all_units

}

done

# Completion functions for ENABLED_UNITS

for fun in disable reenable ; do

(( $+functions[_systemctl_$fun] )) || _systemctl_$fun()

{

_systemctl_enabled_units

compadd "$@" -a - _sys_enabled_units

}

done

# Completion functions for DISABLED_UNITS

(( $+functions[_systemctl_enable] )) || _systemctl_enable()

{

_systemctl_disabled_units

compadd "$@" -a - _sys_disabled_units

}

# Completion functions for FAILED_UNITS

(( $+functions[_systemctl_reset-failed] )) || _systemctl_reset-failed()

{

_systemctl_failed_units

compadd "$@" -a - _sys_failed_units || _message "no failed unit found"

}

# Completion functions for STARTABLE_UNITS

(( $+functions[_systemctl_start] )) || _systemctl_start()

{

_systemctl_inactive_units

compadd "$@" -a - _sys_inactive_units

}

# Completion functions for STOPPABLE_UNITS

for fun in stop kill try-restart condrestart ; do

(( $+functions[_systemctl_$fun] )) || _systemctl_$fun()

{

_systemctl_active_units

compadd "$@" - $( _filter_units_by_property CanStop yes \

${_sys_active_units[*]} )

}

done

# Completion functions for ISOLATABLE_UNITS

(( $+functions[_systemctl_isolate] )) || _systemctl_isolate()

{

_systemctl_all_units

compadd "$@" - $( _filter_units_by_property AllowIsolate yes \

${_sys_all_units[*]} )

}

# Completion functions for RELOADABLE_UNITS

for fun in reload reload-or-try-restart force-reload ; do

(( $+functions[_systemctl_$fun] )) || _systemctl_$fun()

{

_systemctl_active_units

compadd "$@" - $( _filter_units_by_property CanReload yes \

${_sys_active_units[*]} )

}

done

# Completion functions for RESTARTABLE_UNITS

for fun in restart reload-or-restart ; do

(( $+functions[_systemctl_$fun] )) || _systemctl_$fun()

{

_systemctl_all_units

compadd "$@" - $( _filter_units_by_property CanStart yes \

${_sys_all_units[*]} | while read line; do \

[[ "$line" =~ \.(device|snapshot|socket|timer)$ ]] || echo "$line"; \

done )

}

done

# Completion functions for MASKED_UNITS

(( $+functions[_systemctl_unmask] )) || _systemctl_unmask()

{

_systemctl_masked_units

compadd "$@" -a - _sys_masked_units || _message "no masked unit found"

}

# Completion functions for JOBS

(( $+functions[_systemctl_cancel] )) || _systemctl_cancel()

{

compadd "$@" - $(__systemctl list-jobs \

| cut -d' ' -f1 2>/dev/null ) || _message "no job found"

}

# Completion functions for SNAPSHOTS

(( $+functions[_systemctl_delete] )) || _systemctl_delete()

{

compadd "$@" - $(__systemctl list-units --type snapshot --all \

| cut -d' ' -f1 2>/dev/null ) || _message "no snampshot found"

}

# Completion functions for ENVS

for fun in set-environment unset-environment ; do

(( $+functions[_systemctl_$fun] )) || _systemctl_$fun()

{

local fun=$0 ; fun=${fun##_systemctl_}

local suf

if [[ "${fun}" = "set-environment" ]]; then

suf='-S='

fi

compadd "$@" ${suf} - $(systemctl show-environment \

| while read line; do echo "${line%%\=}";done )

}

done

(( $+functions[_systemctl_link] )) || _systemctl_link() { _files }

# no systemctl completion for:

# [STANDALONE]='daemon-reexec daemon-reload default dot dump

# emergency exit halt kexec list-jobs list-units

# list-unit-files poweroff reboot rescue show-environment'

# [NAME]='snapshot load'

_systemctl_caching_policy()

{

local _sysunits

local -a oldcache

# rebuild if cache is more than a day old

oldcache=( "$1"(mh+1) )

(( $#oldcache )) && return 0

_sysunits=($(__systemctl --all | cut -d' ' -f1))

if (( $#_sysunits )); then

for unit in $_sysunits; do

[[ "$unit" -nt "$1" ]] && return 0

done

fi

return 1

}

_list_fields() {

local -a journal_fields

journal_fields=(MESSAGE{,_ID} PRIORITY CODE_{FILE,LINE,FUNC}

ERRNO SYSLOG_{FACILITY,IDENTIFIER,PID}

_{P,U,G}ID _COMM _EXE _CMDLINE

_AUDIT_{SESSION,LOGINUID}

_SYSTEMD_{CGROUP,SESSION,UNIT,OWNER_UID}

_SELINUX_CONTEXT _SOURCE_REALTIME_TIMESTAMP

_{BOOT,MACHINE}_ID _HOSTNAME _TRANSPORT

_KERNEL_{DEVICE,SUBSYSTEM}

_UDEV_{SYSNAME,DEVNODE,DEVLINK}

__CURSOR __{REALTIME,MONOTONIC}_TIMESTAMP)

_describe 'possible fields' journal_fields

}

_journal_fields() {

local -a _fields cmd

cmd=("journalctl" "-F ${@[-1]}" "2>/dev/null" )

_fields=( ${(f)"$(_call_program fields $cmd[@])"} )

typeset -U _fields

_describe 'possible values' _fields

}

_loginctl_all_sessions(){_sys_all_sessions=($(loginctl list-sessions | { while read a b; do echo "$a"; done; }) )}

_loginctl_all_users() {_sys_all_users=( $(loginctl list-users | { while read a b; do echo "$a"; done; }) )}

_loginctl_all_seats() {_sys_all_seats=( $(loginctl list-seats | { while read a b; do echo "$a"; done; }) )}

# Completion functions for SESSIONS

for fun in session-status show-session activate lock-session unlock-session terminate-session kill-session ; do

(( $+functions[_loginctl_$fun] )) || _loginctl_$fun()

{

_loginctl_all_sessions

compadd "$@" -a - _sys_all_sessions

}

done

# Completion functions for USERS

for fun in user-status show-user enable-linger disable-linger terminate-user kill-user ; do

(( $+functions[_loginctl_$fun] )) || _loginctl_$fun()

{

_loginctl_all_users

compadd "$@" -a - _sys_all_users

}

done

# Completion functions for SEATS

(( $+functions[_loginctl_seats] )) || _loginctl_seats()

{

_loginctl_all_seats

compadd "$@" -a - _sys_all_seats

}

for fun in seat-status show-seat terminate-seat ; do

(( $+functions[_loginctl_$fun] )) || _loginctl_$fun()

{ _loginctl_seats }

done

# Completion functions for ATTACH

(( $+functions[_loginctl_attach] )) || _loginctl_attach()

{

_loginctl_all_seats

_arguments -w -C -S -s \

':seat:_loginctl_seats' \

'*:device:_files'

}

# no loginctl completion for:

# [STANDALONE]='list-sessions list-users list-seats flush-devices'

(( $+functions[_loginctl_command] )) || _loginctl_command()

{

local -a _loginctl_cmds

_loginctl_cmds=(

"list-sessions:List sessions"

"session-status:Show session status"

"show-session:Show properties of one or more sessions"

"activate:Activate a session"

"lock-session:Screen lock one or more sessions"

"unlock-session:Screen unlock one or more sessions"

"terminate-session:Terminate one or more sessions"

"kill-session:Send signal to processes of a session"

"list-users:List users"

"user-status:Show user status"

"show-user:Show properties of one or more users"

"enable-linger:Enable linger state of one or more users"

"disable-linger:Disable linger state of one or more users"

"terminate-user:Terminate all sessions of one or more users"

"kill-user:Send signal to processes of a user"

"list-seats:List seats"

"seat-status:Show seat status"

"show-seat:Show properties of one or more seats"

"attach:Attach one or more devices to a seat"

"flush-devices:Flush all device associations"

"terminate-seat:Terminate all sessions on one or more seats"

)

if (( CURRENT == 1 )); then

_describe -t commands 'loginctl command' _loginctl_cmds || compadd "$@"

else

local curcontext="$curcontext"

cmd="${${_loginctl_cmds[(r)$words[1]:*]%%:*}}"

if (( $#cmd )); then

curcontext="${curcontext%:*:*}:loginctl-${cmd}:"

_call_function ret _loginctl_$cmd || _message 'no more arguments'

else

_message "unknown loginctl command: $words[1]"

fi

return ret

fi

}

_hostnamectl_command() {

local -a _hostnamectl_cmds

_hostnamectl_cmds=(

"status:Show current hostname settings"

"set-hostname:Set system hostname"

"set-icon-name:Set icon name for host"

)

if (( CURRENT == 1 )); then

_describe -t commands 'hostnamectl commands' _hostnamectl_cmds || compadd "$@"

else

local curcontext="$curcontext"

cmd="${${_hostnamectl_cmds[(r)$words[1]:*]%%:*}}"

if (( $#cmd )); then

[[ $cmd == status ]] && msg="no options" || msg="options for $cmd"

_message "$msg"

else

_message "unknown hostnamectl command: $words[1]"

fi

fi

}

_localectl_set-locale() {

local -a _confs _locales

local expl suf

_locales=( ${(f)"$(_call_program locales "$service" list-locales)"} )

_confs=( ${${(f)"$(_call_program confs "locale 2>/dev/null")"}%\=*} )

if [[ -prefix 1 *\= ]]; then

local conf=${PREFIX%%\=*}

compset -P1 '*='

_wanted locales expl "locales configs" \

_combination localeconfs confs=$conf locales "$@" -

else

compadd -S '=' $_confs

fi

}

_localectl_set-keymap() {

local -a _keymaps

_keymaps=( ${(f)"$(_call_program locales "$service" list-keymaps)"} )

if (( CURRENT <= 3 )); then

_describe keymaps _keymaps

else

_message "no more options"

fi

}

_localectl_set-x11-keymap() {

if (( $+commands[pkg-config] )); then

local -a _file _layout _model _variant _options

local _xorg_lst

_xorg_lst=${"$($commands[pkg-config] xkeyboard-config --variable=xkb_base)"}

_file=( ${(ps:\n\!:)"$(<$_xorg_lst/rules/xorg.lst)"} )

_layout=( ${${${(M)${(f)_file[1]}:# *}# }%% *} )

_model=( ${${${(M)${(f)_file[2]}:# *}# }%% *} )

_variant=( ${${${(M)${(f)_file[3]}:# *}# }%% *} )

_options=( ${${${(M)${(f)_file[4]}:# *}# }%% *} )

#_layout=( ${(f)"$( echo $_file[1] | awk '/^ / {print $1}' )"} )

#_model=( ${(f)"$(echo $_file[2] | awk '/^ / {print $1}')"} )

#_variant=( ${(f)"$(echo $_file[3] | awk '/^ / {print $1}')"} )

#_options=( ${(f)"$(echo ${_file[4]//:/\\:} | awk '/^ / {print $1}')"} )

case $CURRENT in

2) _describe layouts _layout ;;

3) _describe models _model;;

4) _describe variants _variant;;

5) _describe options _options;;

*) _message "no more options"

esac

fi

}

_localectl_command() {

local -a _localectl_cmds

_localectl_cmds=(

'status:Show current locale settings'

'set-locale:Set system locale'

'list-locales:Show known locales'

'set-keymap:Set virtual console keyboard mapping'

'list-keymaps:Show known virtual console keyboard mappings'

'set-x11-keymap:Set X11 keyboard mapping'

)

if (( CURRENT == 1 )); then

_describe -t commands 'localectl command' _localectl_cmds

else

local curcontext="$curcontext"

cmd="${${_localectl_cmds[(r)$words[1]:*]%%:*}}"

if (( $+functions[_localectl_$cmd] )); then

_localectl_$cmd

else

_message "no more options"

fi

fi

}

_timedatectl_set-timezone(){

local -a _timezones

_timezones=( ${(f)"$(_call_program timezones "${service}" list-timezones)"} )

compadd "$_timezones[@]"

}

_timedatectl_set-time(){

_message "YYYY-MM-DD HH:MM:SS"

}

_timedatectl_set-local-rtc(){

local -a _options

_options=(

'0:Maintain RTC in universal time'

'1:Maintain RTC in local time'

)

_describe options _options

}

_timedatectl_set-ntp(){

local -a _options

_options=(

'0:Disable NTP based network time configuration'

'1:Enable NTP based network time configuration'

)

_describe options _options

}

_timedatectl_command(){

local -a _timedatectl_cmds

_timedatectl_cmds=(

'status:Show current time settings'

'set-time:Set system time'

'set-timezone:Set system timezone'

'list-timezones:Show known timezones'

'set-local-rtc:Control whether RTC is in local time'

'set-ntp:Control whether NTP is enabled'

)

if (( CURRENT == 1 )); then

_describe -t commands 'timedatectl command' _timedatectl_cmds

else

local curcontext="$curcontext"

cmd="${${_timedatectl_cmds[(r)$words[1]:*]%%:*}}"

if (( $#cmd )); then

if (( $+functions[_timedatectl_$cmd] )); then

_timedatectl_$cmd

else

_message "no more options"

fi

else

_message "unknown timedatectl command: $words[1]"

fi

fi

}

_systemd-coredumpctl_command(){

local -a _systemd_coredumpctl_cmds

_systemd_coredumpctl_cmds=(

'list:List available coredumps'

'dump:Print coredump to std'

)

if (( CURRENT == 1 )); then

_describe -t commands 'systemd-coredumpctl command' _systemd_coredumpctl_cmds

else

local curcontext="$curcontext"

local -a dumps

cmd="${${_systemd_coredumpctl_cmds[(r)$words[1]:*]%%:*}}"

if (( $#cmd )); then

dumps=( "${(f)$(_call_program dumps "systemd-coredumpctl list 2>/dev/null")}" )

if [[ -n "$dumps" ]]; then

compadd "${dumps[@]}"

else

_message "no coredumps"

fi

else

_message "no more options"

fi

fi

}

_udevadm_info(){

_arguments \

'--query=[Query the database for specified type of device data. It needs the --path or --name to identify the specified device.]:type:(name symlink path property all)' \

'--path=[The devpath of the device to query.]:sys files:_files -P /sys/ -W /sys' \

'--name=[The name of the device node or a symlink to query]:device files:_files -P /dev/ -W /dev' \

'--root[Print absolute paths in name or symlink query.]' \

'--attribute-walk[Print all sysfs properties of the specified device that can be used in udev rules to match the specified device]' \

'--export[Print output as key/value pairs.]' \

'--export-prefix=[Add a prefix to the key name of exported values.]:prefix' \

'--device-id-of-file=[Print major/minor numbers of the underlying device, where the file lives on.]:files:_udevadm_mounts' \

'--export-db[Export the content of the udev database.]' \

'--cleanup-db[Cleanup the udev database.]'

}

_udevadm_trigger(){

_arguments \

'--verbose[Print the list of devices which will be triggered.]' \

'--dry-run[Do not actually trigger the event.]' \

'--type=[Trigger a specific type of devices.]:types:(devices subsystems failed)' \

'--action=[Type of event to be triggered.]:actions:(add change remove)' \

'--subsystem-match=[Trigger events for devices which belong to a matching subsystem.]' \

'--subsystem-nomatch=[Do not trigger events for devices which belong to a matching subsystem.]' \

'--attr-match=attribute=[Trigger events for devices with a matching sysfs attribute.]' \

'--attr-nomatch=attribute=[Do not trigger events for devices with a matching sysfs attribute.]' \

'--property-match=[Trigger events for devices with a matching property value.]' \

'--tag-match=property[Trigger events for devices with a matching tag.]' \

'--sysname-match=[Trigger events for devices with a matching sys device name.]' \

'--parent-match=[Trigger events for all children of a given device.]'

}

_udevadm_settle(){

_arguments \

'--timeout=[Maximum number of seconds to wait for the event queue to become empty.]' \

'--seq-start=[Wait only for events after the given sequence number.]' \

'--seq-end=[Wait only for events before the given sequence number.]' \

'--exit-if-exists=[Stop waiting if file exists.]:files:_files' \

'--quiet[Do not print any output, like the remaining queue entries when reaching the timeout.]' \

'--help[Print help text.]'

}

_udevadm_control(){

_arguments \

'--exit[Signal and wait for systemd-udevd to exit.]' \

'--log-priority=[Set the internal log level of systemd-udevd.]:priorities:(err info debug)' \

'--stop-exec-queue[Signal systemd-udevd to stop executing new events. Incoming events will be queued.]' \

'--start-exec-queue[Signal systemd-udevd to enable the execution of events.]' \

'--reload[Signal systemd-udevd to reload the rules files and other databases like the kernel module index.]' \

'--property=[Set a global property for all events.]' \

'--children-max=[Set the maximum number of events.]' \

'--timeout=[The maximum number of seconds to wait for a reply from systemd-udevd.]' \

'--help[Print help text.]'

}

_udevadm_monitor(){

_arguments \

'--kernel[Print the kernel uevents.]' \

'--udev[Print the udev event after the rule processing.]' \

'--property[Also print the properties of the event.]' \

'--subsystem-match=[Filter events by subsystem[/devtype].]' \

'--tag-match=[Filter events by property.]' \

'--help[Print help text.]'

}

_udevadm_test(){

_arguments \

'--action=[The action string.]:actions:(add change remove)' \

'--subsystem=[The subsystem string.]' \

'--help[Print help text.]' \

'*::devpath:_files -P /sys/ -W /sys'

}

_udevadm_test-builtin(){

if (( CURRENT == 2 )); then

_arguments \

'--help[Print help text]' \

'*::builtins:(blkid btrfs firmware hwdb input_id kmod path_id usb_id uaccess)'

elif (( CURRENT == 3 )); then

_arguments \

'--help[Print help text]' \

'*::syspath:_files -P /sys -W /sys'

else

_arguments \

'--help[Print help text]'

fi

}

_udevadm_mounts(){

local dev_tmp dpath_tmp mp_tmp mline

tmp=( "${(@f)$(< /etc/mtab)}" )

dev_tmp=( "${(@)${(@)tmp%% *}:#none}" )

mp_tmp=( "${(@)${(@)tmp#* }%% *}" )

local MATCH

mp_tmp=("${(@q)mp_tmp//(#m)\\[0-7](#c3)/${(#)$(( 8#${MATCH[2,-1]} ))}}")

dpath_tmp=( "${(@Mq)dev_tmp:#/*}" )

dev_tmp=( "${(@q)dev_tmp:#/*}" )

_alternative \

'device-paths: device path:compadd -a dpath_tmp' \

'directories:mount point:compadd -a mp_tmp'

}

_udevadm_command(){

local -a _udevadm_cmds

_udevadm_cmds=(

'info:query sysfs or the udev database'

'trigger:request events from the kernel'

'settle:wait for the event queue to finish'

'control:control the udev daemon'

'monitor:listen to kernel and udev events'

'test:test an event run'

'test-builtin:test a built-in command'

)

if ((CURRENT == 1)); then

_describe -t commands 'udevadm commands' _udevadm_cmds

else

local curcontext="$curcontext"

cmd="${${_udevadm_cmds[(r)$words[1]:*]%%:*}}"

if (($#cmd)); then

if (( $+functions[_udevadm_$cmd] )); then

_udevadm_$cmd

else

_message "no options for $cmd"

fi

else

_message "no more options"

fi

fi

}

_ctls "$@"

#vim: set ft=zsh sw=4 ts=4 et