1088N/A[DEFAULT]

1088N/A

1091N/A#

235N/A# From neutron.base.agent

235N/A#

235N/A

235N/A# Name of Open vSwitch bridge to use (string value)

235N/Aovs_integration_bridge = br_int0

606N/A

235N/A# Uses veth for an OVS interface or not. Support kernels with limited namespace

235N/A# support (e.g. RHEL 6.5) so long as ovs_use_veth is set to True. (boolean

235N/A# value)

235N/A#ovs_use_veth = false

235N/A

235N/A# MTU setting for device. This option will be removed in Newton. Please use the

606N/A# system-wide segment_mtu setting which the agents will take into account when

235N/A# wiring VIFs. (integer value)

235N/A# This option is deprecated for removal.

235N/A# Its value may be silently ignored in the future.

235N/A#network_device_mtu = <None>

235N/A

235N/A# The driver used to manage the virtual interface. (string value)

517N/Ainterface_driver = neutron.agent.solaris.interface.OVSInterfaceDriver

606N/A

713N/A# Timeout in seconds for ovs-vsctl commands. If the timeout expires, ovs

764N/A# commands will fail with ALARMCLOCK error. (integer value)

766N/A#ovs_vsctl_timeout = 10

876N/A

881N/A#

1088N/A# From neutron.l3.agent

1088N/A#

# The working mode for the agent. Allowed modes are: 'legacy' - this preserves

# the existing behavior where the L3 agent is deployed on a centralized

# networking node to provide L3 services like DNAT, and SNAT. Use this mode if

# you do not want to adopt DVR. 'dvr' - this mode enables DVR functionality and

# must be used for an L3 agent that runs on a compute host. 'dvr_snat' - this

# enables centralized SNAT support in conjunction with DVR. This mode must be

# used for an L3 agent running on a centralized node (or in single-host

# deployments, e.g. devstack) (string value)

# Allowed values: dvr, dvr_snat, legacy

#agent_mode = legacy

# TCP Port used by Neutron metadata namespace proxy. (port value)

# Minimum value: 0

# Maximum value: 65535

#metadata_port = 9697

# Send this many gratuitous ARPs for HA setup, if less than or equal to 0, the

# feature is disabled (integer value)

#send_arp_for_ha = 3

# If non-empty, the l3 agent can only configure a router that has the matching

# router ID. (string value)

# This option is deprecated for removal.

# Its value may be silently ignored in the future.

#router_id =

# Indicates that this L3 agent should also handle routers that do not have an

# external network gateway configured. This option should be True only for a

# single agent in a Neutron deployment, and may be False for all agents if all

# routers must have an external network gateway. (boolean value)

#handle_internal_only_routers = true

# When external_network_bridge is set, each L3 agent can be associated with no

# more than one external network. This value should be set to the UUID of that

# external network. To allow L3 agent support multiple external networks, both

# the external_network_bridge and gateway_external_network_id must be left

# empty. (string value)

#gateway_external_network_id =

# With IPv6, the network used for the external gateway does not need to have an

# associated subnet, since the automatically assigned link-local address (LLA)

# can be used. However, an IPv6 gateway address is needed for use as the next-

# hop for the default route. If no IPv6 gateway address is configured here,

# (and only then) the neutron router will be configured to get its default

# route from router advertisements (RAs) from the upstream router; in which

# case the upstream router must also be configured to send these RAs. The

# ipv6_gateway, when configured, should be the LLA of the interface on the

# upstream router. If a next-hop using a global unique address (GUA) is

# desired, it needs to be done via a subnet allocated to the network and not

# through this parameter. (string value)

#ipv6_gateway =

# Driver used for ipv6 prefix delegation. This needs to be an entry point

# defined in the neutron.agent.linux.pd_drivers namespace. See setup.cfg for

# entry points included with the neutron source. (string value)

#prefix_delegation_driver = dibbler

# Allow running metadata proxy. (boolean value)

#enable_metadata_proxy = true

# Iptables mangle mark used to mark metadata valid requests. This mark will be

# masked with 0xffff so that only the lower 16 bits will be used. (string

# value)

#metadata_access_mark = 0x1

# Iptables mangle mark used to mark ingress from external network. This mark

# will be masked with 0xffff so that only the lower 16 bits will be used.

# (string value)

#external_ingress_mark = 0x2

# Name of bridge used for external network traffic. This should be set to an

# empty value for the Linux Bridge. When this parameter is set, each L3 agent

# can be associated with no more than one external network. (string value)

external_network_bridge = br_ex0

# Seconds between running periodic tasks (integer value)

#periodic_interval = 40

# Number of separate API worker processes for service. If not specified, the

# default is equal to the number of CPUs available for best performance.

# (integer value)

#api_workers = <None>

# Number of RPC worker processes for service (integer value)

#rpc_workers = 1

# Number of RPC worker processes dedicated to state reports queue (integer

# value)

#rpc_state_report_workers = 1

# Range of seconds to randomly delay when starting the periodic task scheduler

# to reduce stampeding. (Disable by setting to 0) (integer value)

#periodic_fuzzy_delay = 5

# Location to store keepalived/conntrackd config files (string value)

#ha_confs_path = $state_path/ha_confs

# VRRP authentication type (string value)

# Allowed values: AH, PASS

#ha_vrrp_auth_type = PASS

# VRRP authentication password (string value)

#ha_vrrp_auth_password = <None>

# The advertisement interval in seconds (integer value)

#ha_vrrp_advert_int = 2

# Service to handle DHCPv6 Prefix delegation. (string value)

#pd_dhcp_driver = dibbler

# Location to store IPv6 RA config files (string value)

#ra_confs = $state_path/ra

# MinRtrAdvInterval setting for radvd.conf (integer value)

#min_rtr_adv_interval = 30

# MaxRtrAdvInterval setting for radvd.conf (integer value)

#max_rtr_adv_interval = 100

# Allow forwarding of packets between tenant's networks (boolean value)

#allow_forwarding_between_networks = false

# Admin username (string value)

admin_user = %SERVICE_USER%

# Admin password (string value)

admin_password = %SERVICE_PASSWORD%

# Admin tenant name (string value)

admin_tenant_name = %SERVICE_TENANT_NAME%

# Authentication URL (string value)

auth_url = http://localhost:5000/v2.0

# The type of authentication to use (string value)

#auth_strategy = keystone

# Authentication region (string value)

#auth_region = <None>

# Network service endpoint type to pull from the keystone catalog (string

# value)

#endpoint_type = publicURL

#

# From oslo.log

#

# If set to true, the logging level will be set to DEBUG instead of the default

# INFO level. (boolean value)

#debug = false

# If set to false, the logging level will be set to WARNING instead of the

# default INFO level. (boolean value)

# This option is deprecated for removal.

# Its value may be silently ignored in the future.

#verbose = true

# The name of a logging configuration file. This file is appended to any

# existing logging configuration files. For details about logging configuration

# files, see the Python logging module documentation. Note that when logging

# configuration files are used then all logging configuration is set in the

# configuration file and other logging configuration options are ignored (for

# example, logging_context_format_string). (string value)

# Deprecated group/name - [DEFAULT]/log_config

#log_config_append = <None>

# Defines the format string for %%(asctime)s in log records. Default:

# %(default)s . This option is ignored if log_config_append is set. (string

# value)

#log_date_format = %Y-%m-%d %H:%M:%S

# (Optional) Name of log file to send logging output to. If no default is set,

# logging will go to stderr as defined by use_stderr. This option is ignored if

# log_config_append is set. (string value)

# Deprecated group/name - [DEFAULT]/logfile

#log_file = <None>

# (Optional) The base directory used for relative log_file paths. This option

# is ignored if log_config_append is set. (string value)

# Deprecated group/name - [DEFAULT]/logdir

#log_dir = <None>

# Uses logging handler designed to watch file system. When log file is moved or

# removed this handler will open a new log file with specified path

# instantaneously. It makes sense only if log_file option is specified and

# Linux platform is used. This option is ignored if log_config_append is set.

# (boolean value)

#watch_log_file = false

# Use syslog for logging. Existing syslog format is DEPRECATED and will be

# changed later to honor RFC5424. This option is ignored if log_config_append

# is set. (boolean value)

#use_syslog = false

# Syslog facility to receive log lines. This option is ignored if

# log_config_append is set. (string value)

#syslog_log_facility = LOG_USER

# Log output to standard error. This option is ignored if log_config_append is

# set. (boolean value)

#use_stderr = true

# Format string to use for log messages with context. (string value)

#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s

# Format string to use for log messages when context is undefined. (string

# value)

#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s

# Additional data to append to log message when logging level for the message

# is DEBUG. (string value)

#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d

# Prefix each line of exception output with this format. (string value)

#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s

# Defines the format string for %(user_identity)s that is used in

# logging_context_format_string. (string value)

#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s

# List of package logging levels in logger=LEVEL pairs. This option is ignored

# if log_config_append is set. (list value)

#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO

# Enables or disables publication of error events. (boolean value)

#publish_errors = false

# The format for an instance that is passed with the log message. (string

# value)

#instance_format = "[instance: %(uuid)s] "

# The format for an instance UUID that is passed with the log message. (string

# value)

#instance_uuid_format = "[instance: %(uuid)s] "

# Enables or disables fatal status of deprecations. (boolean value)

#fatal_deprecations = false

[AGENT]

#

# From neutron.base.agent

#

# Seconds between nodes reporting state to server; should be less than

# agent_down_time, best if it is half or less than agent_down_time. (floating

# point value)

#report_interval = 30

# Log agent heartbeats (boolean value)

#log_agent_heartbeats = false