CipherSpi.java revision 4007
/*
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
*
* under the terms of the GNU General Public License version 2 only, as
* published by the Free Software Foundation. Oracle designates this
* particular file as subject to the "Classpath" exception as provided
* by Oracle in the LICENSE file that accompanied this code.
*
* This code is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* version 2 for more details (a copy is included in the LICENSE file that
* accompanied this code).
*
* You should have received a copy of the GNU General Public License version
* 2 along with this work; if not, write to the Free Software Foundation,
* Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
*
* Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
* or visit www.oracle.com if you need additional information or have any
* questions.
*/
/**
* This class defines the <i>Service Provider Interface</i> (<b>SPI</b>)
* for the <code>Cipher</code> class.
* All the abstract methods in this class must be implemented by each
* cryptographic service provider who wishes to supply the implementation
* of a particular cipher algorithm.
*
* <p>In order to create an instance of <code>Cipher</code>, which
* encapsulates an instance of this <code>CipherSpi</code> class, an
* application calls one of the
* {@link Cipher#getInstance(java.lang.String) getInstance}
* factory methods of the
* {@link Cipher Cipher} engine class and specifies the requested
* <i>transformation</i>.
* Optionally, the application may also specify the name of a provider.
*
* <p>A <i>transformation</i> is a string that describes the operation (or
* set of operations) to be performed on the given input, to produce some
* output. A transformation always includes the name of a cryptographic
* algorithm (e.g., <i>DES</i>), and may be followed by a feedback mode and
* padding scheme.
*
* <p> A transformation is of the form:<p>
*
* <ul>
* <p>
* <li>"<i>algorithm</i>"
* </ul>
*
* <P> (in the latter case,
* provider-specific default values for the mode and padding scheme are used).
* For example, the following is a valid transformation:<p>
*
* <pre>
* Cipher c = Cipher.getInstance("<i>DES/CBC/PKCS5Padding</i>");
* </pre>
*
* <p>A provider may supply a separate class for each combination
* classes representing sub-transformations corresponding to
* (note the double slashes),
* the <code>getInstance</code> methods of <code>Cipher</code>, which invoke
* the {@link #engineSetMode(java.lang.String) engineSetMode} and
* {@link #engineSetPadding(java.lang.String) engineSetPadding}
* methods of the provider's subclass of <code>CipherSpi</code>.
*
* <p>A <code>Cipher</code> property in a provider master class may have one of
* the following formats:
*
* <ul>
*
* <li>
* <pre>
* // provider's subclass of "CipherSpi" implements "algName" with
* // pluggable mode and padding
* <code>Cipher.</code><i>algName</i>
* </pre>
*
* <li>
* <pre>
* // provider's subclass of "CipherSpi" implements "algName" in the
* // specified "mode", with pluggable padding
* </pre>
*
* <li>
* <pre>
* // provider's subclass of "CipherSpi" implements "algName" with the
* // specified "padding", with pluggable mode
* <code>Cipher.</code><i>algName//padding</i>
* </pre>
*
* <li>
* <pre>
* // provider's subclass of "CipherSpi" implements "algName" with the
* // specified "mode" and "padding"
* </pre>
*
* </ul>
*
* <p>For example, a provider may supply a subclass of <code>CipherSpi</code>
* that implements <i>DES/ECB/PKCS5Padding</i>, one that implements
* <i>DES/CBC/PKCS5Padding</i>, one that implements
* <i>DES/CFB/PKCS5Padding</i>, and yet another one that implements
* <i>DES/OFB/PKCS5Padding</i>. That provider would have the following
* <code>Cipher</code> properties in its master class:<p>
*
* <ul>
*
* <li>
* <pre>
* <code>Cipher.</code><i>DES/ECB/PKCS5Padding</i>
* </pre>
*
* <li>
* <pre>
* <code>Cipher.</code><i>DES/CBC/PKCS5Padding</i>
* </pre>
*
* <li>
* <pre>
* <code>Cipher.</code><i>DES/CFB/PKCS5Padding</i>
* </pre>
*
* <li>
* <pre>
* <code>Cipher.</code><i>DES/OFB/PKCS5Padding</i>
* </pre>
*
* </ul>
*
* <p>Another provider may implement a class for each of the above modes
* (i.e., one class for <i>ECB</i>, one for <i>CBC</i>, one for <i>CFB</i>,
* and one for <i>OFB</i>), one class for <i>PKCS5Padding</i>,
* and a generic <i>DES</i> class that subclasses from <code>CipherSpi</code>.
* That provider would have the following
* <code>Cipher</code> properties in its master class:<p>
*
* <ul>
*
* <li>
* <pre>
* <code>Cipher.</code><i>DES</i>
* </pre>
*
* </ul>
*
* <p>The <code>getInstance</code> factory method of the <code>Cipher</code>
* engine class follows these rules in order to instantiate a provider's
* implementation of <code>CipherSpi</code> for a
* transformation of the form "<i>algorithm</i>":
*
* <ol>
* <li>
* Check if the provider has registered a subclass of <code>CipherSpi</code>
* for the specified "<i>algorithm</i>".
* <p>If the answer is YES, instantiate this
* class, for whose mode and padding scheme default values (as supplied by
* the provider) are used.
* <p>If the answer is NO, throw a <code>NoSuchAlgorithmException</code>
* exception.
* </ol>
*
* <p>The <code>getInstance</code> factory method of the <code>Cipher</code>
* engine class follows these rules in order to instantiate a provider's
* implementation of <code>CipherSpi</code> for a
*
* <ol>
* <li>
* Check if the provider has registered a subclass of <code>CipherSpi</code>
* <p>If the answer is YES, instantiate it.
* <p>If the answer is NO, go to the next step.<p>
* <li>
* Check if the provider has registered a subclass of <code>CipherSpi</code>
* <p>If the answer is YES, instantiate it, and call
* <code>engineSetPadding(<i>padding</i>)</code> on the new instance.
* <p>If the answer is NO, go to the next step.<p>
* <li>
* Check if the provider has registered a subclass of <code>CipherSpi</code>
* for the sub-transformation "<i>algorithm//padding</i>" (note the double
* slashes).
* <p>If the answer is YES, instantiate it, and call
* <code>engineSetMode(<i>mode</i>)</code> on the new instance.
* <p>If the answer is NO, go to the next step.<p>
* <li>
* Check if the provider has registered a subclass of <code>CipherSpi</code>
* for the sub-transformation "<i>algorithm</i>".
* <p>If the answer is YES, instantiate it, and call
* <code>engineSetMode(<i>mode</i>)</code> and
* <code>engineSetPadding(<i>padding</i>)</code> on the new instance.
* <p>If the answer is NO, throw a <code>NoSuchAlgorithmException</code>
* exception.
* </ol>
*
* @author Jan Luehe
* @see KeyGenerator
* @see SecretKey
* @since 1.4
*/
public abstract class CipherSpi {
/**
* Sets the mode of this cipher.
*
* @param mode the cipher mode
*
* @exception NoSuchAlgorithmException if the requested cipher mode does
* not exist
*/
throws NoSuchAlgorithmException;
/**
* Sets the padding mechanism of this cipher.
*
* @param padding the padding mechanism
*
* @exception NoSuchPaddingException if the requested padding mechanism
* does not exist
*/
throws NoSuchPaddingException;
/**
* Returns the block size (in bytes).
*
* @return the block size (in bytes), or 0 if the underlying algorithm is
* not a block cipher
*/
protected abstract int engineGetBlockSize();
/**
* Returns the length in bytes that an output buffer would
* need to be in order to hold the result of the next <code>update</code>
* or <code>doFinal</code> operation, given the input length
* <code>inputLen</code> (in bytes).
*
* <p>This call takes into account any unprocessed (buffered) data from a
* previous <code>update</code> call, padding, and AEAD tagging.
*
* <p>The actual output length of the next <code>update</code> or
* <code>doFinal</code> call may be smaller than the length returned by
* this method.
*
* @param inputLen the input length (in bytes)
*
* @return the required output buffer size (in bytes)
*/
protected abstract int engineGetOutputSize(int inputLen);
/**
* Returns the initialization vector (IV) in a new buffer.
*
* <p> This is useful in the context of password-based encryption or
* decryption, where the IV is derived from a user-provided passphrase.
*
* @return the initialization vector in a new buffer, or null if the
* underlying algorithm does not use an IV, or if the IV has not yet
* been set.
*/
protected abstract byte[] engineGetIV();
/**
* Returns the parameters used with this cipher.
*
* <p>The returned parameters may be the same that were used to initialize
* this cipher, or may contain a combination of default and random
* parameter values used by the underlying cipher implementation if this
* cipher requires algorithm parameters but was not initialized with any.
*
* @return the parameters used with this cipher, or null if this cipher
* does not use any parameters.
*/
protected abstract AlgorithmParameters engineGetParameters();
/**
* Initializes this cipher with a key and a source
* of randomness.
*
* <p>The cipher is initialized for one of the following four operations:
* encryption, decryption, key wrapping or key unwrapping, depending on
* the value of <code>opmode</code>.
*
* <p>If this cipher requires any algorithm parameters that cannot be
* derived from the given <code>key</code>, the underlying cipher
* implementation is supposed to generate the required parameters itself
* (using provider-specific default or random values) if it is being
* initialized for encryption or key wrapping, and raise an
* <code>InvalidKeyException</code> if it is being
* initialized for decryption or key unwrapping.
* The generated parameters can be retrieved using
* {@link #engineGetParameters() engineGetParameters} or
* {@link #engineGetIV() engineGetIV} (if the parameter is an IV).
*
* <p>If this cipher requires algorithm parameters that cannot be
* derived from the input parameters, and there are no reasonable
* provider-specific default values, initialization will
* necessarily fail.
*
* <p>If this cipher (including its underlying feedback or padding scheme)
* requires any random bytes (e.g., for parameter generation), it will get
* them from <code>random</code>.
*
* <p>Note that when a Cipher object is initialized, it loses all
* previously-acquired state. In other words, initializing a Cipher is
* equivalent to creating a new instance of that Cipher and initializing
* it.
*
* @param opmode the operation mode of this cipher (this is one of
* the following:
* <code>ENCRYPT_MODE</code>, <code>DECRYPT_MODE</code>,
* <code>WRAP_MODE</code> or <code>UNWRAP_MODE</code>)
* @param key the encryption key
* @param random the source of randomness
*
* @exception InvalidKeyException if the given key is inappropriate for
* initializing this cipher, or requires
* algorithm parameters that cannot be
* determined from the given key.
*/
throws InvalidKeyException;
/**
* Initializes this cipher with a key, a set of
* algorithm parameters, and a source of randomness.
*
* <p>The cipher is initialized for one of the following four operations:
* encryption, decryption, key wrapping or key unwrapping, depending on
* the value of <code>opmode</code>.
*
* <p>If this cipher requires any algorithm parameters and
* <code>params</code> is null, the underlying cipher implementation is
* supposed to generate the required parameters itself (using
* provider-specific default or random values) if it is being
* initialized for encryption or key wrapping, and raise an
* <code>InvalidAlgorithmParameterException</code> if it is being
* initialized for decryption or key unwrapping.
* The generated parameters can be retrieved using
* {@link #engineGetParameters() engineGetParameters} or
* {@link #engineGetIV() engineGetIV} (if the parameter is an IV).
*
* <p>If this cipher requires algorithm parameters that cannot be
* derived from the input parameters, and there are no reasonable
* provider-specific default values, initialization will
* necessarily fail.
*
* <p>If this cipher (including its underlying feedback or padding scheme)
* requires any random bytes (e.g., for parameter generation), it will get
* them from <code>random</code>.
*
* <p>Note that when a Cipher object is initialized, it loses all
* previously-acquired state. In other words, initializing a Cipher is
* equivalent to creating a new instance of that Cipher and initializing
* it.
*
* @param opmode the operation mode of this cipher (this is one of
* the following:
* <code>ENCRYPT_MODE</code>, <code>DECRYPT_MODE</code>,
* <code>WRAP_MODE</code> or <code>UNWRAP_MODE</code>)
* @param key the encryption key
* @param params the algorithm parameters
* @param random the source of randomness
*
* @exception InvalidKeyException if the given key is inappropriate for
* initializing this cipher
* @exception InvalidAlgorithmParameterException if the given algorithm
* parameters are inappropriate for this cipher,
* or if this cipher requires
* algorithm parameters and <code>params</code> is null.
*/
/**
* Initializes this cipher with a key, a set of
* algorithm parameters, and a source of randomness.
*
* <p>The cipher is initialized for one of the following four operations:
* encryption, decryption, key wrapping or key unwrapping, depending on
* the value of <code>opmode</code>.
*
* <p>If this cipher requires any algorithm parameters and
* <code>params</code> is null, the underlying cipher implementation is
* supposed to generate the required parameters itself (using
* provider-specific default or random values) if it is being
* initialized for encryption or key wrapping, and raise an
* <code>InvalidAlgorithmParameterException</code> if it is being
* initialized for decryption or key unwrapping.
* The generated parameters can be retrieved using
* {@link #engineGetParameters() engineGetParameters} or
* {@link #engineGetIV() engineGetIV} (if the parameter is an IV).
*
* <p>If this cipher requires algorithm parameters that cannot be
* derived from the input parameters, and there are no reasonable
* provider-specific default values, initialization will
* necessarily fail.
*
* <p>If this cipher (including its underlying feedback or padding scheme)
* requires any random bytes (e.g., for parameter generation), it will get
* them from <code>random</code>.
*
* <p>Note that when a Cipher object is initialized, it loses all
* previously-acquired state. In other words, initializing a Cipher is
* equivalent to creating a new instance of that Cipher and initializing
* it.
*
* @param opmode the operation mode of this cipher (this is one of
* the following:
* <code>ENCRYPT_MODE</code>, <code>DECRYPT_MODE</code>,
* <code>WRAP_MODE</code> or <code>UNWRAP_MODE</code>)
* @param key the encryption key
* @param params the algorithm parameters
* @param random the source of randomness
*
* @exception InvalidKeyException if the given key is inappropriate for
* initializing this cipher
* @exception InvalidAlgorithmParameterException if the given algorithm
* parameters are inappropriate for this cipher,
* or if this cipher requires
* algorithm parameters and <code>params</code> is null.
*/
/**
* Continues a multiple-part encryption or decryption operation
* (depending on how this cipher was initialized), processing another data
* part.
*
* <p>The first <code>inputLen</code> bytes in the <code>input</code>
* buffer, starting at <code>inputOffset</code> inclusive, are processed,
* and the result is stored in a new buffer.
*
* @param input the input buffer
* @param inputOffset the offset in <code>input</code> where the input
* starts
* @param inputLen the input length
*
* @return the new buffer with the result, or null if the underlying
* cipher is a block cipher and the input data is too short to result in a
* new block.
*/
int inputLen);
/**
* Continues a multiple-part encryption or decryption operation
* (depending on how this cipher was initialized), processing another data
* part.
*
* <p>The first <code>inputLen</code> bytes in the <code>input</code>
* buffer, starting at <code>inputOffset</code> inclusive, are processed,
* and the result is stored in the <code>output</code> buffer, starting at
* <code>outputOffset</code> inclusive.
*
* <p>If the <code>output</code> buffer is too small to hold the result,
* a <code>ShortBufferException</code> is thrown.
*
* @param input the input buffer
* @param inputOffset the offset in <code>input</code> where the input
* starts
* @param inputLen the input length
* @param output the buffer for the result
* @param outputOffset the offset in <code>output</code> where the result
* is stored
*
* @return the number of bytes stored in <code>output</code>
*
* @exception ShortBufferException if the given output buffer is too small
* to hold the result
*/
int outputOffset)
throws ShortBufferException;
/**
* Continues a multiple-part encryption or decryption operation
* (depending on how this cipher was initialized), processing another data
* part.
*
* <p>All <code>input.remaining()</code> bytes starting at
* <code>input.position()</code> are processed. The result is stored
* in the output buffer.
* Upon return, the input buffer's position will be equal
* to its limit; its limit will not have changed. The output buffer's
* position will have advanced by n, where n is the value returned
* by this method; the output buffer's limit will not have changed.
*
* <p>If <code>output.remaining()</code> bytes are insufficient to
* hold the result, a <code>ShortBufferException</code> is thrown.
*
* <p>Subclasses should consider overriding this method if they can
* process ByteBuffers more efficiently than byte arrays.
*
* @param input the input ByteBuffer
* @param output the output ByteByffer
*
* @return the number of bytes stored in <code>output</code>
*
* @exception ShortBufferException if there is insufficient space in the
* output buffer
*
* @throws NullPointerException if either parameter is <CODE>null</CODE>
* @since 1.5
*/
throws ShortBufferException {
try {
} catch (IllegalBlockSizeException e) {
// never thrown for engineUpdate()
throw new ProviderException("Internal error in update()");
} catch (BadPaddingException e) {
// never thrown for engineUpdate()
throw new ProviderException("Internal error in update()");
}
}
/**
* Encrypts or decrypts data in a single-part operation,
* or finishes a multiple-part operation.
* The data is encrypted or decrypted, depending on how this cipher was
* initialized.
*
* <p>The first <code>inputLen</code> bytes in the <code>input</code>
* buffer, starting at <code>inputOffset</code> inclusive, and any input
* bytes that may have been buffered during a previous <code>update</code>
* operation, are processed, with padding (if requested) being applied.
* tag is appended in the case of encryption, or verified in the
* case of decryption.
* The result is stored in a new buffer.
*
* <p>Upon finishing, this method resets this cipher object to the state
* it was in when previously initialized via a call to
* <code>engineInit</code>.
* That is, the object is reset and available to encrypt or decrypt
* (depending on the operation mode that was specified in the call to
* <code>engineInit</code>) more data.
*
* <p>Note: if any exception is thrown, this cipher object may need to
* be reset before it can be used again.
*
* @param input the input buffer
* @param inputOffset the offset in <code>input</code> where the input
* starts
* @param inputLen the input length
*
* @return the new buffer with the result
*
* @exception IllegalBlockSizeException if this cipher is a block cipher,
* no padding has been requested (only in encryption mode), and the total
* input length of the data processed by this cipher is not a multiple of
* block size; or if this encryption algorithm is unable to
* process the input data provided.
* @exception BadPaddingException if this cipher is in decryption mode,
* and (un)padding has been requested, but the decrypted data is not
* bounded by the appropriate padding bytes
* @exception AEADBadTagException if this cipher is decrypting in an
* does not match the calculated value
*/
int inputLen)
/**
* Encrypts or decrypts data in a single-part operation,
* or finishes a multiple-part operation.
* The data is encrypted or decrypted, depending on how this cipher was
* initialized.
*
* <p>The first <code>inputLen</code> bytes in the <code>input</code>
* buffer, starting at <code>inputOffset</code> inclusive, and any input
* bytes that may have been buffered during a previous <code>update</code>
* operation, are processed, with padding (if requested) being applied.
* tag is appended in the case of encryption, or verified in the
* case of decryption.
* The result is stored in the <code>output</code> buffer, starting at
* <code>outputOffset</code> inclusive.
*
* <p>If the <code>output</code> buffer is too small to hold the result,
* a <code>ShortBufferException</code> is thrown.
*
* <p>Upon finishing, this method resets this cipher object to the state
* it was in when previously initialized via a call to
* <code>engineInit</code>.
* That is, the object is reset and available to encrypt or decrypt
* (depending on the operation mode that was specified in the call to
* <code>engineInit</code>) more data.
*
* <p>Note: if any exception is thrown, this cipher object may need to
* be reset before it can be used again.
*
* @param input the input buffer
* @param inputOffset the offset in <code>input</code> where the input
* starts
* @param inputLen the input length
* @param output the buffer for the result
* @param outputOffset the offset in <code>output</code> where the result
* is stored
*
* @return the number of bytes stored in <code>output</code>
*
* @exception IllegalBlockSizeException if this cipher is a block cipher,
* no padding has been requested (only in encryption mode), and the total
* input length of the data processed by this cipher is not a multiple of
* block size; or if this encryption algorithm is unable to
* process the input data provided.
* @exception ShortBufferException if the given output buffer is too small
* to hold the result
* @exception BadPaddingException if this cipher is in decryption mode,
* and (un)padding has been requested, but the decrypted data is not
* bounded by the appropriate padding bytes
* @exception AEADBadTagException if this cipher is decrypting in an
* does not match the calculated value
*/
int outputOffset)
/**
* Encrypts or decrypts data in a single-part operation,
* or finishes a multiple-part operation.
* The data is encrypted or decrypted, depending on how this cipher was
* initialized.
*
* <p>All <code>input.remaining()</code> bytes starting at
* <code>input.position()</code> are processed.
* tag is appended in the case of encryption, or verified in the
* case of decryption.
* The result is stored in the output buffer.
* Upon return, the input buffer's position will be equal
* to its limit; its limit will not have changed. The output buffer's
* position will have advanced by n, where n is the value returned
* by this method; the output buffer's limit will not have changed.
*
* <p>If <code>output.remaining()</code> bytes are insufficient to
* hold the result, a <code>ShortBufferException</code> is thrown.
*
* <p>Upon finishing, this method resets this cipher object to the state
* it was in when previously initialized via a call to
* <code>engineInit</code>.
* That is, the object is reset and available to encrypt or decrypt
* (depending on the operation mode that was specified in the call to
* <code>engineInit</code>) more data.
*
* <p>Note: if any exception is thrown, this cipher object may need to
* be reset before it can be used again.
*
* <p>Subclasses should consider overriding this method if they can
* process ByteBuffers more efficiently than byte arrays.
*
* @param input the input ByteBuffer
* @param output the output ByteByffer
*
* @return the number of bytes stored in <code>output</code>
*
* @exception IllegalBlockSizeException if this cipher is a block cipher,
* no padding has been requested (only in encryption mode), and the total
* input length of the data processed by this cipher is not a multiple of
* block size; or if this encryption algorithm is unable to
* process the input data provided.
* @exception ShortBufferException if there is insufficient space in the
* output buffer
* @exception BadPaddingException if this cipher is in decryption mode,
* and (un)padding has been requested, but the decrypted data is not
* bounded by the appropriate padding bytes
* @exception AEADBadTagException if this cipher is decrypting in an
* does not match the calculated value
*
* @throws NullPointerException if either parameter is <CODE>null</CODE>
* @since 1.5
*/
}
// copied from sun.security.jca.JCAUtil
// will be changed to reference that method once that code has been
// integrated and promoted
static int getTempArraySize(int totalSize) {
}
/**
* Implementation for encryption using ByteBuffers. Used for both
* engineUpdate() and engineDoFinal().
*/
boolean isUpdate) throws ShortBufferException,
throw new NullPointerException
("Input and output buffers must not be null");
}
return 0;
}
+ " bytes of space in output buffer");
}
int n;
if (isUpdate) {
} else {
}
return n;
int total = 0;
while (inLen > 0) {
int n;
} else {
}
total += n;
outOfs += n;
}
return total;
} else { // output is not backed by an accessible byte[]
byte[] inArray;
int inOfs;
if (a1) {
} else {
inOfs = 0;
}
int total = 0;
boolean resized = false;
while (inLen > 0) {
inOfs = 0;
}
try {
int n;
} else {
}
resized = false;
total += n;
} catch (ShortBufferException e) {
if (resized) {
// we just resized the output buffer, but it still
// did not work. Bug in the provider, abort
throw (ProviderException)new ProviderException
("Could not determine buffer size").initCause(e);
}
// output buffer is too small, realloc and try again
resized = true;
}
}
return total;
}
}
/**
* Wrap a key.
*
* <p>This concrete method has been added to this previously-defined
* abstract class. (For backwards compatibility, it cannot be abstract.)
* It may be overridden by a provider to wrap a key.
* Such an override is expected to throw an IllegalBlockSizeException or
* InvalidKeyException (under the specified circumstances),
* if the given key cannot be wrapped.
* If this method is not overridden, it always throws an
* UnsupportedOperationException.
*
* @param key the key to be wrapped.
*
* @return the wrapped key.
*
* @exception IllegalBlockSizeException if this cipher is a block cipher,
* no padding has been requested, and the length of the encoding of the
* key to be wrapped is not a multiple of the block size.
*
* @exception InvalidKeyException if it is impossible or unsafe to
* wrap the key with this cipher (e.g., a hardware protected key is
* being passed to a software-only cipher).
*/
{
throw new UnsupportedOperationException();
}
/**
* Unwrap a previously wrapped key.
*
* <p>This concrete method has been added to this previously-defined
* abstract class. (For backwards compatibility, it cannot be abstract.)
* It may be overridden by a provider to unwrap a previously wrapped key.
* Such an override is expected to throw an InvalidKeyException if
* the given wrapped key cannot be unwrapped.
* If this method is not overridden, it always throws an
* UnsupportedOperationException.
*
* @param wrappedKey the key to be unwrapped.
*
* @param wrappedKeyAlgorithm the algorithm associated with the wrapped
* key.
*
* @param wrappedKeyType the type of the wrapped key. This is one of
* <code>SECRET_KEY</code>, <code>PRIVATE_KEY</code>, or
* <code>PUBLIC_KEY</code>.
*
* @return the unwrapped key.
*
* @exception NoSuchAlgorithmException if no installed providers
* can create keys of type <code>wrappedKeyType</code> for the
* <code>wrappedKeyAlgorithm</code>.
*
* @exception InvalidKeyException if <code>wrappedKey</code> does not
* represent a wrapped key of type <code>wrappedKeyType</code> for
* the <code>wrappedKeyAlgorithm</code>.
*/
int wrappedKeyType)
{
throw new UnsupportedOperationException();
}
/**
* Returns the key size of the given key object in bits.
* <p>This concrete method has been added to this previously-defined
* abstract class. It throws an <code>UnsupportedOperationException</code>
* if it is not overridden by the provider.
*
* @param key the key object.
*
* @return the key size of the given key object.
*
* @exception InvalidKeyException if <code>key</code> is invalid.
*/
throws InvalidKeyException
{
throw new UnsupportedOperationException();
}
/**
* Continues a multi-part update of the Additional Authentication
* Data (AAD), using a subset of the provided buffer.
* <p>
* Calls to this method provide AAD to the cipher when operating in
* either GCM or CCM mode, all AAD must be supplied before beginning
* operations on the ciphertext (via the {@code update} and {@code
* doFinal} methods).
*
* @param src the buffer containing the AAD
* @param offset the offset in {@code src} where the AAD input starts
* @param len the number of AAD bytes
*
* @throws IllegalStateException if this cipher is in a wrong state
* (e.g., has not been initialized), does not accept AAD, or if
* operating in either GCM or CCM mode and one of the {@code update}
* methods has already been called for the active
* encryption/decryption operation
* @throws UnsupportedOperationException if this method
* has not been overridden by an implementation
*
* @since 1.7
*/
throw new UnsupportedOperationException(
"The underlying Cipher implementation "
+ "does not support this method");
}
/**
* Continues a multi-part update of the Additional Authentication
* Data (AAD).
* <p>
* Calls to this method provide AAD to the cipher when operating in
* either GCM or CCM mode, all AAD must be supplied before beginning
* operations on the ciphertext (via the {@code update} and {@code
* doFinal} methods).
* <p>
* All {@code src.remaining()} bytes starting at
* {@code src.position()} are processed.
* Upon return, the input buffer's position will be equal
* to its limit; its limit will not have changed.
*
* @param src the buffer containing the AAD
*
* @throws IllegalStateException if this cipher is in a wrong state
* (e.g., has not been initialized), does not accept AAD, or if
* operating in either GCM or CCM mode and one of the {@code update}
* methods has already been called for the active
* encryption/decryption operation
* @throws UnsupportedOperationException if this method
* has not been overridden by an implementation
*
* @since 1.7
*/
throw new UnsupportedOperationException(
"The underlying Cipher implementation "
+ "does not support this method");
}
}