build.xml revision b34561d2c3d92fac37dbced05ba6a8738e3d20e9
<?xml version="1.0" encoding="UTF-8"?>
<!--
CDDL HEADER START
The contents of this file are subject to the terms of the
Common Development and Distribution License (the "License").
You may not use this file except in compliance with the License.
See LICENSE.txt included in this distribution for the specific
language governing permissions and limitations under the License.
When distributing Covered Code, include this CDDL HEADER in each
file and include the License file at LICENSE.txt.
If applicable, add the following below this CDDL HEADER, with the
fields enclosed by brackets "[]" replaced with your own identifying
information: Portions Copyright [yyyy] [name of copyright owner]
CDDL HEADER END
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
-->
<project name="OpenGrok" default="jar" basedir=".">
<description>Builds, tests, and runs the project opengrok.</description>
<import file="nbproject/build-impl.xml"/>
<import file="nbproject/profiler-build-impl.xml"/> <!--
There exist several targets which are by default empty and which can be
used for execution of your tasks. These targets are usually executed
before and after some main targets. They are:
-pre-init: called before initialization of project properties
-post-init: called after initialization of project properties
-pre-compile: called before javac compilation
-post-compile: called after javac compilation
-pre-compile-single: called before javac compilation of single file
-post-compile-single: called after javac compilation of single file
-pre-compile-test: called before javac compilation of JUnit tests
-post-compile-test: called after javac compilation of JUnit tests
-pre-compile-test-single: called before javac compilation of single JUnit test
-post-compile-test-single: called after javac compilation of single JUunit test
-pre-jar: called before JAR building
-post-jar: called after JAR building
-post-clean: called after cleaning build products
(Targets beginning with '-' are not intended to be called on their own.)
Example of inserting an obfuscator after compilation could look like this:
<target name="-post-compile">
<obfuscate>
<fileset dir="${build.classes.dir}"/>
</obfuscate>
</target>
For list of available properties check the imported
nbproject/build-impl.xml file.
Another way to customize the build is by overriding existing main targets.
The targets of interest are:
-init-macrodef-javac: defines macro for javac compilation
-init-macrodef-junit: defines macro for junit execution
-init-macrodef-debug: defines macro for class debugging
-init-macrodef-java: defines macro for class execution
-do-jar-with-manifest: JAR building (if you are using a manifest)
-do-jar-without-manifest: JAR building (if you are not using a manifest)
run: execution of project
-javadoc-build: Javadoc generation
test-report: JUnit report generation
An example of overriding the target for project execution could look like this:
<target name="run" depends="opengrok-impl.jar">
<exec dir="bin" executable="launcher.exe">
<arg file="${dist.jar}"/>
</exec>
</target>
Notice that the overridden target depends on the jar target and not only on
the compile target as the regular run target does. Again, for a list of available
properties which you can use, check the target you are overriding in the
nbproject/build-impl.xml file.
-->
<property name="version" value="0.9"/>
<property name="distname" value="opengrok"/>
<property name="findbugs.home" value="${user.home}/.ant/lib/findbugs"/>
<property name="checkstyle.home" value="${user.home}/.ant/lib/checkstyle"/>
<property name="pmd.home" value="${user.home}/.ant/lib/pmd"/>
<property name="test.repositories" value="testdata/repositories"/>
<property name="test.sources" value="testdata/sources"/>
<property name="test.cvs" value="${test.repositories}/cvs"/>
<property name="test.cvs.repo" value="${test.cvs}/cvsrepo"/>
<property name="test.cvs.root" value="${test.cvs}/cvsroot"/>
<property name="test.hg" value="${test.repositories}/mercurial"/>
<property name="test.svn" value="${test.repositories}/svn"/>
<property name="test.razor" value="${test.repositories}/razor"/>
<available property="compileSystrayClient" classname="java.awt.TrayIcon"/>
<target name="-exclude-client" unless="compileSystrayClient">
<echo>JDK doesn't have java.awt.TrayIcon, excluding building of systray client ... </echo>
<property name="excludes" value="org/opensolaris/opengrok/management/client/**"/>
</target>
<path id="lib.search.path">
<pathelement path="${user.home}/.ant/lib"/>
<pathelement path="${java.class.path}"/>
<pathelement path="lib"/>
<pathelement path="/lib"/>
</path>
<path id="findbugs.lib.search.path">
<pathelement path="${findbugs.home}/lib/"/>
<pathelement path="${java.class.path}"/>
<pathelement path="lib/findbugs/lib/"/>
</path>
<path id="checkstyle.lib.search.path">
<pathelement path="${checkstyle.home}/"/>
<pathelement path="${java.class.path}"/>
</path>
<path id="pmd.lib.search.path">
<pathelement path="${pmd.home}/lib/"/>
<pathelement path="${java.class.path}"/>
<pathelement path="lib/pmd/lib/"/>
</path>
<available file="JFlex.jar" type="file" property="JFlex.present">
<filepath refid="lib.search.path"/>
</available>
<fail unless="JFlex.present" message="Please download JFlex (http://jflex.de/) and put JFlex.jar it into /lib directory (or in ant classpath)."/>
<taskdef classname="JFlex.anttask.JFlexTask" name="jflex" classpath="lib/JFlex.jar;/lib/JFlex.jar"/>
<target name="jflex">
<mkdir dir="${src.generatedsrc.dir}"/>
<jflex file="${src.dir}/org/opensolaris/opengrok/analysis/plain/PlainXref.lex" destdir="${src.generatedsrc.dir}"/>
<jflex file="${src.dir}/org/opensolaris/opengrok/analysis/c/CSymbolTokenizer.lex" destdir="${src.generatedsrc.dir}"/>
<jflex file="${src.dir}/org/opensolaris/opengrok/analysis/c/CXref.lex" destdir="${src.generatedsrc.dir}"/>
<jflex file="${src.dir}/org/opensolaris/opengrok/analysis/c/CxxSymbolTokenizer.lex" destdir="${src.generatedsrc.dir}"/>
<jflex file="${src.dir}/org/opensolaris/opengrok/analysis/c/CxxXref.lex" destdir="${src.generatedsrc.dir}"/>
<jflex file="${src.dir}/org/opensolaris/opengrok/analysis/fortran/FortranSymbolTokenizer.lex" destdir="${src.generatedsrc.dir}"/>
<jflex file="${src.dir}/org/opensolaris/opengrok/analysis/fortran/FortranXref.lex" destdir="${src.generatedsrc.dir}"/>
<jflex file="${src.dir}/org/opensolaris/opengrok/analysis/java/JavaSymbolTokenizer.lex" destdir="${src.generatedsrc.dir}"/>
<jflex file="${src.dir}/org/opensolaris/opengrok/analysis/java/JavaXref.lex" destdir="${src.generatedsrc.dir}"/>
<jflex file="${src.dir}/org/opensolaris/opengrok/analysis/lisp/LispSymbolTokenizer.lex" destdir="${src.generatedsrc.dir}"/>
<jflex file="${src.dir}/org/opensolaris/opengrok/analysis/lisp/LispXref.lex" destdir="${src.generatedsrc.dir}"/>
<jflex file="${src.dir}/org/opensolaris/opengrok/analysis/tcl/TclSymbolTokenizer.lex" destdir="${src.generatedsrc.dir}"/>
<jflex file="${src.dir}/org/opensolaris/opengrok/analysis/tcl/TclXref.lex" destdir="${src.generatedsrc.dir}"/>
<jflex file="${src.dir}/org/opensolaris/opengrok/analysis/plain/PlainFullTokenizer.lex" destdir="${src.generatedsrc.dir}"/>
<jflex file="${src.dir}/org/opensolaris/opengrok/analysis/plain/PlainSymbolTokenizer.lex" destdir="${src.generatedsrc.dir}"/>
<jflex file="${src.dir}/org/opensolaris/opengrok/analysis/plain/PlainXref.lex" destdir="${src.generatedsrc.dir}"/>
<jflex file="${src.dir}/org/opensolaris/opengrok/analysis/plain/XMLXref.lex" destdir="${src.generatedsrc.dir}"/>
<jflex file="${src.dir}/org/opensolaris/opengrok/analysis/sql/SQLXref.lex" destdir="${src.generatedsrc.dir}"/>
<jflex file="${src.dir}/org/opensolaris/opengrok/analysis/document/TroffXref.lex" destdir="${src.generatedsrc.dir}"/>
<jflex file="${src.dir}/org/opensolaris/opengrok/analysis/document/TroffFullTokenizer.lex" destdir="${src.generatedsrc.dir}"/>
<jflex file="${src.dir}/org/opensolaris/opengrok/analysis/sh/ShSymbolTokenizer.lex" destdir="${src.generatedsrc.dir}"/>
<jflex file="${src.dir}/org/opensolaris/opengrok/analysis/sh/ShXref.lex" destdir="${src.generatedsrc.dir}"/>
<jflex file="${src.dir}/org/opensolaris/opengrok/search/context/HistoryLineTokenizer.lex" destdir="${src.generatedsrc.dir}"/>
<jflex file="${src.dir}/org/opensolaris/opengrok/search/context/PlainLineTokenizer.lex" destdir="${src.generatedsrc.dir}"/>
</target>
<property name="hg" value="hg"/>
<target name="-hg-get-changeset">
<exec executable="${hg}"
failifexecutionfails="no"
outputproperty="changeset">
<arg value="identify"/>
<arg value="--id"/>
</exec>
</target>
<target name="-update-build-info" depends="-hg-get-changeset">
<mkdir dir="${build.classes.dir}/org/opensolaris/opengrok"/>
<propertyfile
file="${build.classes.dir}/org/opensolaris/opengrok/info.properties">
<entry key="version" value="${version}"/>
<entry key="changeset" value="${changeset}"/>
</propertyfile>
</target>
<property name="coverage.dir" value="${basedir}/coverage"/>
<target name="-pre-compile" depends="jflex"/>
<target name="-post-clean">
<delete dir="${src.generatedsrc.dir}"/>
<delete file="${manifest.file}"/>
<delete dir="${coverage.dir}"/>
<antcall target="-delete-generated-repository-files"/>
</target>
<!--
Create an empty manifest file so that nbproject/build-impl.xml
notices that a manifest should be added to the jar file
-->
<target name="-touch-manifest">
<!-- no attributes, main-class and class-path will be added later -->
<manifest file="manifest.mf" mode="replace"/>
</target>
<target name="-pre-init" depends="-touch-manifest, -exclude-client"/>
<!--
Initialize a property holding a list of jar files on which
opengrok.jar depends
-->
<target name="-post-init">
<pathconvert property="opengrok.lib.files" pathsep=" ">
<path>
<pathelement path="${javac.classpath}"/>
</path>
<flattenmapper/>
<map from="" to="lib/"/>
</pathconvert>
</target>
<!-- Update the manifest file with a classpath attribute -->
<target name="-update-manifest-classpath">
<manifest file="${manifest.file}" mode="update">
<attribute name="Class-Path"
value="${opengrok.lib.files} lib/derbyclient.jar lib/derby.jar"/>
</manifest>
</target>
<target name="-pre-jar" depends="-update-manifest-classpath,-update-build-info"/>
<!--
Copy the jars from lib to dist/lib manually if we don't have
the copylibs task from NetBeans
-->
<target name="-copy-lib-without-netbeans"
unless="manifest.available+main.class+mkdist.available">
<copy todir="${dist.dir}/lib">
<fileset file="${file.reference.ant.jar}"/>
</copy>
<copy todir="${dist.dir}">
<fileset dir="." includes="${opengrok.lib.files}"/>
</copy>
</target>
<target name="-post-jar" depends="-copy-lib-without-netbeans">
<war destfile="${dist.war}" webxml="web/WEB-INF/web.xml">
<fileset dir="web"/>
<lib dir="${dist.dir}" includes="opengrok.jar"/>
<lib dir="${dist.dir}/lib" includes="*.jar" excludes="servlet-api.jar"/>
</war>
<echo message="Generating man page.."/>
<java classname="org.opensolaris.opengrok.index.CommandLineOptions"
output="${dist.dir}/opengrok.1" failonerror="true" fork="true">
<classpath>
<pathelement location="dist/opengrok.jar"/>
<pathelement path="${java.class.path}"/>
</classpath>
</java>
</target>
<target name="package" depends="jar">
<exec os="SunOS" executable="/usr/bin/pkgmk" failonerror="true">
<arg line="-o -d build -r . -v ${version} -f platform/solaris/pkgdef/prototype"/>
</exec>
<exec os="SunOS" executable="/usr/bin/pkgtrans" failonerror="true">
<arg line="-s build /dist/OSOLopengrok-${version}.pkg OSOLopengrok"/>
</exec>
</target>
<target name="dist" depends="jar">
<tar destfile="${dist.dir}/${distname}-${version}.tar.gz"
compression="gzip">
<tarfileset dir="." prefix="${distname}-${version}">
<include name="README.txt"/>
<include name="CHANGES.txt"/>
<include name="LICENSE.txt"/>
<include name="paths.tsv"/>
<include name="logging.properties"/>
</tarfileset>
<tarfileset dir="." prefix="${distname}-${version}" mode="755">
<include name="OpenGrok"/>
<include name="run.sh"/>
<include name="run-quiet.sh"/>
<include name="run.bat"/>
</tarfileset>
<tarfileset dir="doc" prefix="${distname}-${version}">
<include name="EXAMPLE.txt"/>
</tarfileset>
<tarfileset dir="${dist.dir}" prefix="${distname}-${version}">
<include name="opengrok.jar"/>
<include name="source.war"/>
<include name="lib/*"/>
<exclude name="lib/servlet-api.jar"/>
</tarfileset>
</tar>
</target>
<target name="dist-src" depends="init">
<mkdir dir="${dist.dir}"/>
<exec executable="hg">
<arg value="archive"/>
<arg value="-t"/>
<arg value="tgz"/>
<arg value="${dist.dir}/${distname}-${version}-src.tar.gz"/>
</exec>
</target>
<target name="-check_findbugs" description="Check that findbugs jar files are present">
<available file="findbugs.jar" type="file" property="findbugs.jar.present">
<filepath refid="findbugs.lib.search.path"/>
</available>
<fail unless="findbugs.jar.present" message="Please install Findbugs findbugs.jar in ~/.ant/lib-directory (or in ant classpath) to run Findbugs, see README"/>
<available file="findbugs-ant.jar" type="file" property="findbugs-ant.jar.present">
<filepath refid="findbugs.lib.search.path"/>
</available>
<fail unless="findbugs-ant.jar.present" message="Please install Findbugs findbugs-ant.jar in ~/.ant/lib-directory (or in ant classpath) to run Findbugs, see README"/>
</target>
<target name="findbugs" depends="jar, -check_findbugs" description="Runs Findbugs on the OpenGrok source code and generate HTML output">
<path id="findbugs.lib" >
<pathelement location="${findbugs.home}/lib/findbugs.jar"/>
<pathelement location="${findbugs.home}/lib/findbugs-ant.jar"/>
</path>
<taskdef name="findbugs" classname="edu.umd.cs.findbugs.anttask.FindBugsTask" classpathref="findbugs.lib"/>
<mkdir dir="findbugs"/>
<findbugs projectname="OpenGrok" home="${findbugs.home}" output="html" excludeFilter="tools/findbugs_filter.xml" outputFile="findbugs/findbugs.html" jvmargs="-Xmx512m">
<auxClasspath>
<fileset dir="${dist.dir}/lib/">
<include name="*.jar"/>
</fileset>
</auxClasspath>
<sourcePath path="src" />
<class location="${dist.dir}/opengrok.jar" />
</findbugs>
</target>
<target name="findbugs-xml" depends="jar, -check_findbugs" description="Runs Findbugs on the OpenGrok source code and generate XML output">
<path id="findbugs.lib" >
<pathelement location="${findbugs.home}/lib/findbugs.jar"/>
<pathelement location="${findbugs.home}/lib/findbugs-ant.jar"/>
</path>
<taskdef name="findbugs" classname="edu.umd.cs.findbugs.anttask.FindBugsTask" classpathref="findbugs.lib"/>
<mkdir dir="findbugs"/>
<findbugs projectname="OpenGrok" home="${findbugs.home}" output="xml" excludeFilter="tools/findbugs_filter.xml" outputFile="findbugs/findbugs.xml" jvmargs="-Xmx512m">
<auxClasspath>
<fileset dir="${dist.dir}/lib/">
<include name="*.jar"/>
</fileset>
</auxClasspath>
<sourcePath path="src" />
<class location="${dist.dir}/opengrok.jar" />
</findbugs>
</target>
<target name="-check_checkstyle" description="Check that checkstyle jar files are present">
<available file="checkstyle-all.jar" type="file" property="checkstyle.jar.present">
<filepath refid="checkstyle.lib.search.path"/>
</available>
<fail unless="checkstyle.jar.present" message="Please install checkstyle-all.jar in lib-directory (or in ant classpath) to run Checkstyle, see README."/>
</target>
<target name="checkstyle" depends="compile, -check_checkstyle" description="Run checkstyle on OpenGrok source code">
<taskdef resource="checkstyletask.properties" classpath="${checkstyle.home}/checkstyle-all.jar"/>
<checkstyle config="checkstyle/style.xml" failOnViolation="false">
<fileset dir="src" includes="**/*.java"/>
<formatter type="plain"/>
<formatter type="plain" toFile="checkstyle/checkstyle_errors.txt"/>
<formatter type="xml" toFile="checkstyle/checkstyle_errors.xml"/>
</checkstyle>
</target>
<target name="-check_pmd" description="Check that pmd jar files are present">
<available file="pmd.jar" type="file" property="pmd.jar.present">
<filepath refid="pmd.lib.search.path"/>
</available>
<fail unless="pmd.jar.present" message="Please install pmd.jar in lib-directory (or in ant classpath) to run PMD, see README."/>
</target>
<target name="pmd" depends="compile, -check_pmd" description="Run PMD on OpenGrok source code">
<path id="pmd.lib" >
<pathelement location="${pmd.home}/lib/pmd.jar"/>
<pathelement location="${pmd.home}/lib/jaxen.jar"/>
</path>
<taskdef name="pmd" classname="net.sourceforge.pmd.ant.PMDTask" classpathref="pmd.lib"/>
<mkdir dir="pmd"/>
<pmd targetjdk="1.6" failuresPropertyName="pmd.num.warnings" rulesetfiles="tools/pmd_ruleset.xml">
<formatter type="html" toFile="pmd/pmd_report.html"/>
<formatter type="xml" toFile="pmd/pmd_report.xml"/>
<fileset dir="src" includes="**/*.java"/>
</pmd>
<echo message="PMD finished, found ${pmd.num.warnings} warnings, see pmd/pmd_report.html"/>
</target>
<target name="-check_emma" description="Check that emma jar files are present">
<available file="emma.jar" type="file" property="emma.jar.present">
<filepath refid="lib.search.path"/>
</available>
<fail unless="emma.jar.present" message="Please install emma.jar in lib-directory (or in ant classpath) to run Emma, see README."/>
<available file="emma_ant.jar" type="file" property="emma_ant.jar.present">
<filepath refid="lib.search.path"/>
</available>
<fail unless="emma_ant.jar.present" message="Please install emma_ant.jar in lib-directory (or in ant classpath) to run Emma, see README."/>
</target>
<target name="emma-instrument" depends="compile, -check_emma" description="Instruments the source code for Emma code coverage analysis">
<path id="emma.lib" >
<pathelement location="lib/emma.jar"/>
<pathelement location="lib/emma_ant.jar"/>
</path>
<taskdef resource="emma_ant.properties" classpathref="emma.lib"/>
<mkdir dir="${coverage.dir}" />
<emma enabled="true">
<instr instrpath="build/classes"
metadatafile="${coverage.dir}/coverage.em"
mode="overwrite"
filter="+org.opensolaris.*,-org.opensolaris.opengrok.management.client.*"/>
</emma>
</target>
<target name="-pre-compile-test">
<property name="test-sys-prop.emma.coverage.out.file" value="${coverage.dir}/coverage.ec"/>
<property name="test-sys-prop.emma.coverage.out.merge" value="true"/>
</target>
<target name="-post-compile-test">
<antcall target="-create-svn-repository"/>
<antcall target="-create-razor-repository"/>
<!-- Change root in CVS test repository -->
<!-- Strange indentation in line two levels below to get newline correctly -->
<concat destfile="${test.cvs.repo}/CVS/Root" append="no" force="yes" eol="unix">${basedir}/${test.cvs.root}/
</concat>
<!-- Generate ZIP files used for unit testing mercurial/.hg and mercurial/.hgignore are renamed -->
<copy todir="${test.hg}/.hg">
<fileset dir="${test.hg}/hg"/>
</copy>
<copy file="${test.hg}/hgignore" tofile="${test.hg}/.hgignore"/>
<zip destfile="${build.test.classes.dir}/org/opensolaris/opengrok/index/source.zip"
basedir="${test.sources}"
update="false"
defaultexcludes="no"/>
<zip destfile="${build.test.classes.dir}/org/opensolaris/opengrok/history/repositories.zip"
basedir="${test.repositories}"
excludes="mercurial/hg/**, mercurial/hgignore"
update="false"
defaultexcludes="no"/>
<antcall target="-delete-generated-repository-files"/>
</target>
<target name="-create-svn-repository">
<delete dir="${test.svn}"/>
<delete dir="${build.test.reposroots}/svn"/>
<mkdir dir="${build.test.reposroots}"/>
<exec executable="svnadmin" failifexecutionfails="false">
<arg value="create"/>
<arg value="${build.test.reposroots}/svn"/>
</exec>
<!-- need absolute path for svn url -->
<pathconvert property="test.svn.url">
<map from="" to="file://"/>
<path location="${build.test.reposroots}/svn"/>
</pathconvert>
<exec executable="svn" failifexecutionfails="false">
<arg value="import"/>
<arg value="${test.sources}"/>
<arg value="${test.svn.url}"/>
<arg value="-m"/>
<arg value="Initial import"/>
</exec>
<exec executable="svn" failifexecutionfails="false">
<arg value="checkout"/>
<arg value="${test.svn.url}"/>
<arg value="${test.svn}"/>
</exec>
</target>
<target name="-create-razor-repository">
<delete dir="${test.razor}"/>
<copy todir="${test.razor}/Razor-Simple">
<fileset dir="ext/SampleRazorRepository/UserSandbox"/>
</copy>
<copy todir="${test.razor}/Razor-Simple/SimpleCProgram/.razor">
<fileset dir="ext/SampleRazorRepository/Repository/OpenGrokSample/RAZOR_UNIVERSE/DOMAIN_01/Simple"/>
</copy>
<!--
The support for binaries in Razor repositories is not fully
functional, so the next copy target is commented out for now.
-->
<!--copy todir="${test.razor}/Razor-Simple/SimpleCProgram-BinaryRelease/.razor">
<fileset dir="ext/SampleRazorRepository/Repository/OpenGrokSample/RAZOR_UNIVERSE/DOMAIN_01/Simple"/>
</copy-->
</target>
<!-- clean up generated test repositories -->
<target name="-delete-generated-repository-files">
<delete dir="${test.hg}/.hg"/>
<delete file="${test.hg}/.hgignore"/>
<delete dir="${test.svn}"/>
<delete dir="${test.razor}"/>
<delete file="${test.cvs.repo}/CVS/Root"/>
</target>
<target name="emma-report" description="Analyze" depends="-check_emma">
<taskdef resource="emma_ant.properties" classpathref="emma.lib"/>
<emma enabled="true" >
<report sourcepath="${src.dir},${src.generatedsrc.dir}">
<!-- collect all EMMA data dumps (metadata and runtime): -->
<infileset dir="${coverage.dir}" includes="*.em, *.ec"/>
<txt outfile="${coverage.dir}/coverage.txt"/>
<xml outfile="${coverage.dir}/coverage.xml"/>
<html outfile="${coverage.dir}/index.html"/>
</report>
</emma>
</target>
<target name="code-coverage" depends="clean, emma-instrument, test, emma-report" description="Make test code coverage reports based on the OpenGrok unit tests"/>
<target name="jdepend" depends="compile" description="Run JDepend dependency checking">
<mkdir dir="jdepend"/>
<java classname="jdepend.xmlui.JDepend" failonerror="true" fork="true">
<arg value="-file"/>
<arg value="jdepend/report.xml"/>
<arg value="${build.classes.dir}"/>
<classpath>
<pathelement location="${user.home}/.ant/lib/jdepend/lib/jdepend.jar"/>
<pathelement path="${java.class.path}"/>
</classpath>
</java>
<java classname="jdepend.textui.JDepend" failonerror="true" fork="true">
<arg value="-file"/>
<arg value="jdepend/report.txt"/>
<arg value="${build.classes.dir}"/>
<classpath>
<pathelement location="${user.home}/.ant/lib/jdepend/lib/jdepend.jar"/>
<pathelement path="${java.class.path}"/>
</classpath>
</java>
</target>
<!-- Generate HTML test report -->
<target depends="init" name="test-report">
<junitreport todir="${build.test.results.dir}">
<fileset dir="${build.test.results.dir}">
<include name="TEST-*.xml"/>
</fileset>
<report todir="${build.test.results.dir}"/>
</junitreport>
</target>
</project>