build.xml revision 225d5411e0f1f0e690e3553aad7a97c648d566a1
<?xml version="1.0" encoding="UTF-8"?>
<!--
CDDL HEADER START
The contents of this file are subject to the terms of the
Common Development and Distribution License (the "License").
You may not use this file except in compliance with the License.
See LICENSE.txt included in this distribution for the specific
language governing permissions and limitations under the License.
When distributing Covered Code, include this CDDL HEADER in each
file and include the License file at LICENSE.txt.
If applicable, add the following below this CDDL HEADER, with the
fields enclosed by brackets "[]" replaced with your own identifying
information: Portions Copyright [yyyy] [name of copyright owner]
CDDL HEADER END
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
-->
<project name="OpenGrok" default="jar" basedir=".">
<description>Builds, tests, and runs the project opengrok.</description>
<import file="nbproject/build-impl.xml"/>
There exist several targets which are by default empty and which can be
used for execution of your tasks. These targets are usually executed
before and after some main targets. They are:
-pre-init: called before initialization of project properties
-post-init: called after initialization of project properties
-pre-compile: called before javac compilation
-post-compile: called after javac compilation
-pre-compile-single: called before javac compilation of single file
-post-compile-single: called after javac compilation of single file
-pre-compile-test: called before javac compilation of JUnit tests
-post-compile-test: called after javac compilation of JUnit tests
-pre-compile-test-single: called before javac compilation of single JUnit test
-post-compile-test-single: called after javac compilation of single JUunit test
-pre-jar: called before JAR building
-post-jar: called after JAR building
-post-clean: called after cleaning build products
(Targets beginning with '-' are not intended to be called on their own.)
Example of inserting an obfuscator after compilation could look like this:
<target name="-post-compile">
<obfuscate>
<fileset dir="${build.classes.dir}"/>
</obfuscate>
</target>
For list of available properties check the imported
nbproject/build-impl.xml file.
Another way to customize the build is by overriding existing main targets.
The targets of interest are:
-init-macrodef-javac: defines macro for javac compilation
-init-macrodef-junit: defines macro for junit execution
-init-macrodef-debug: defines macro for class debugging
-init-macrodef-java: defines macro for class execution
-do-jar-with-manifest: JAR building (if you are using a manifest)
-do-jar-without-manifest: JAR building (if you are not using a manifest)
run: execution of project
-javadoc-build: Javadoc generation
test-report: JUnit report generation
An example of overriding the target for project execution could look like this:
<target name="run" depends="opengrok-impl.jar">
<exec dir="bin" executable="launcher.exe">
<arg file="${dist.jar}"/>
</exec>
</target>
Notice that the overridden target depends on the jar target and not only on
the compile target as the regular run target does. Again, for a list of available
properties which you can use, check the target you are overriding in the
nbproject/build-impl.xml file.
-->
<property name="version" value="0.6beta"/>
<property name="distname" value="opengrok"/>
<property name="gensrcdir" value="generatedsrc"/>
<target name="jflex">
<mkdir dir="${gensrcdir}"/>
<jflex file="src/org/opensolaris/opengrok/analysis/java/JavaSymbolTokenizer.lex" destdir="${gensrcdir}"/>
<jflex file="src/org/opensolaris/opengrok/analysis/lisp/LispSymbolTokenizer.lex" destdir="${gensrcdir}"/>
<jflex file="src/org/opensolaris/opengrok/analysis/tcl/TclSymbolTokenizer.lex" destdir="${gensrcdir}"/>
<jflex file="src/org/opensolaris/opengrok/analysis/plain/PlainFullTokenizer.lex" destdir="${gensrcdir}"/>
<jflex file="src/org/opensolaris/opengrok/analysis/plain/PlainSymbolTokenizer.lex" destdir="${gensrcdir}"/>
<jflex file="src/org/opensolaris/opengrok/analysis/document/TroffFullTokenizer.lex" destdir="${gensrcdir}"/>
<jflex file="src/org/opensolaris/opengrok/analysis/sh/ShSymbolTokenizer.lex" destdir="${gensrcdir}"/>
<jflex file="src/org/opensolaris/opengrok/search/context/HistoryLineTokenizer.lex" destdir="${gensrcdir}"/>
<jflex file="src/org/opensolaris/opengrok/search/context/PlainLineTokenizer.lex" destdir="${gensrcdir}"/>
</target>
<property name="hg" value="hg"/>
<target name="-hg-get-changeset">
<exec executable="${hg}"
failifexecutionfails="no"
outputproperty="changeset">
<arg value="log"/>
<arg value="-r"/>
<arg value="tip"/>
<redirector>
<outputfilterchain>
<param type="regexp" value="^changeset:"/>
</filterreader>
<tokenfilter>
<replaceregex pattern="^changeset:[^:]*:" replace=""/>
</tokenfilter>
</outputfilterchain>
</redirector>
</exec>
</target>
<target name="-update-build-info" depends="-hg-get-changeset">
<mkdir dir="${build.classes.dir}/org/opensolaris/opengrok"/>
<propertyfile
file="${build.classes.dir}/org/opensolaris/opengrok/info.properties">
<entry key="version" value="${version}"/>
<entry key="changeset" value="${changeset}"/>
</propertyfile>
</target>
<target name="-pre-compile" depends="jflex"/>
<target name="-post-clean">
<delete dir="${gensrcdir}"/>
<delete file="${manifest.file}"/>
</target>
<!--
Create an empty manifest file so that nbproject/build-impl.xml
notices that a manifest should be added to the jar file
-->
<target name="-touch-manifest">
<!-- no attributes, main-class and class-path will be added later -->
</target>
<target name="-pre-init" depends="-touch-manifest"/>
<!--
Initialize a property holding a list of jar files on which
opengrok.jar depends
-->
<target name="-post-init">
<path>
<pathelement path="${javac.classpath}"/>
</path>
<flattenmapper/>
<map from="" to="lib/"/>
</pathconvert>
</target>
<!-- Update the manifest file with a classpath attribute -->
<target name="-update-manifest-classpath">
</manifest>
</target>
<target name="-pre-jar" depends="-update-manifest-classpath,-update-build-info"/>
<!--
the copylibs task from NetBeans
-->
<target name="-copy-lib-without-netbeans"
unless="manifest.available+main.class+mkdist.available">
<copy todir="${dist.dir}">
</copy>
</target>
<target name="-post-jar" depends="-copy-lib-without-netbeans">
<fileset dir="web"/>
</war>
</target>
<target name="package" depends="jar">
</exec>
<arg line="-s build /dist/OSOLopengrok-${version}.pkg OSOLopengrok"/>
</exec>
</target>
<target name="dist" depends="jar">
compression="gzip">
<tarfileset dir="." prefix="${distname}-${version}">
<include name="README.txt"/>
<include name="CHANGES.txt"/>
<include name="LICENSE.txt"/>
<include name="paths.tsv"/>
</tarfileset>
<tarfileset dir="." prefix="${distname}-${version}" mode="755">
<include name="run.sh"/>
<include name="run-quiet.sh"/>
<include name="run.bat"/>
</tarfileset>
<tarfileset dir="doc" prefix="${distname}-${version}">
<include name="EXAMPLE.txt"/>
</tarfileset>
<include name="opengrok.jar"/>
<include name="source.war"/>
<include name="lib/*"/>
</tarfileset>
</tar>
</target>
<target name="dist-src" depends="init">
<mkdir dir="${dist.dir}"/>
<exec executable="hg">
<arg value="archive"/>
<arg value="-t"/>
<arg value="tgz"/>
<arg value="${dist.dir}/${distname}-${version}-src.tar.gz"/>
</exec>
</target>
</project>