sp-mesh-array.cpp revision 359a38ce40498397028473d956691915ed3e849a
/** \file
A group of classes and functions for manipulating mesh gradients.
A mesh is made up of an array of patches. Each patch has four sides and four corners. The sides can
be shared between two patches and the corners between up to four.
The order of the points for each side always goes from left to right or top to bottom.
For sides 2 and 3 the points must be reversed when used (as in calls to cairo functions).
Two patches: (C=corner, S=side, H=handle, T=tensor)
C0 H1 H2 C1 C0 H1 H2 C1
+ ---------- + ---------- +
| S0 | S0 |
H1 | T0 T1 |H1 T0 T1 | H1
|S3 S1|S3 S1|
H2 | T3 T2 |H2 T3 T2 | H2
| S2 | S2 |
+ ---------- + ---------- +
C3 H1 H2 C2 C3 H1 H2 C2
The mesh is stored internally as an array of nodes that includes the tensor nodes.
Note: This code uses tensor points which are not part of the SVG2 plan at the moment.
Including tensor points was motivated by a desire to experiment with their usefulness
in smoothing color transitions. There doesn't seem to be much advantage for that
purpose. However including them internally allows for storing all the points in
an array which simplifies things like inserting new rows or columns.
*/
/*
* Authors:
* Tavmjong Bah <tavmjong@free.fr>
*
* Copyrigt (C) 2012 Tavmjong Bah
*
* Released under GNU GPL, read the file 'COPYING' for more information
*/
#include "sp-mesh-array.h"
#include "sp-mesh-gradient.h"
#include "sp-mesh-row.h"
#include "sp-mesh-patch.h"
#include "sp-stop.h"
// For new mesh creation
#include "preferences.h"
#include "sp-ellipse.h"
#include "sp-star.h"
// For writing color/opacity to style
#include "svg/css-ostringstream.h"
// For color picking
#include "display/drawing.h"
#include "display/drawing-context.h"
#include "display/cairo-utils.h"
#include "document.h"
#include "sp-root.h"
// For default color
#include "style.h"
#include "svg/svg-color.h"
// Includes bezier-curve.h, ray.h, crossing.h
#include "2geom/line.h"
#include "xml/repr.h"
#include <cmath>
#include <algorithm>
enum { ROW, COL };
void swap_p( Geom::Point *p1, Geom::Point *p2 ) {
Geom::Point temp = *p1;
*p1 = *p2;
*p2 = temp;
};
SPMeshPatchI::SPMeshPatchI( std::vector<std::vector< SPMeshNode* > > * n, int r, int c ) {
nodes = n;
row = r*3; // Convert from patch array to node array
col = c*3;
uint i = 0;
if( row != 0 ) i = 1;
for( ; i < 4; ++i ) {
if( nodes->size() < row+i+1 ) {
std::vector< SPMeshNode* > row;
nodes->push_back( row );
}
uint j = 0;
if( col != 0 ) j = 1;
for( ; j < 4; ++j ) {
if( (*nodes)[row+i].size() < col+j+1 ){
SPMeshNode* node = new SPMeshNode;
// Ensure all nodes know their type.
node->node_type = MG_NODE_TYPE_HANDLE;
if( (i == 0 || i == 3) && (j == 0 || j == 3 ) ) node->node_type = MG_NODE_TYPE_CORNER;
if( (i == 1 || i == 2) && (j == 1 || j == 2 ) ) node->node_type = MG_NODE_TYPE_TENSOR;
(*nodes)[row+i].push_back( node );
}
}
}
}
/**
Returns point for side in proper order for patch
*/
Geom::Point SPMeshPatchI::getPoint( uint s, uint pt ) {
assert( s < 4 );
assert( pt < 4 );
Geom::Point p;
switch ( s ) {
case 0:
p = (*nodes)[ row ][ col+pt ]->p;
break;
case 1:
p = (*nodes)[ row+pt ][ col+3 ]->p;
break;
case 2:
p = (*nodes)[ row+3 ][ col+3-pt ]->p;
break;
case 3:
p = (*nodes)[ row+3-pt ][ col ]->p;
break;
}
return p;
};
/**
Returns vector of points for a side in proper order for a patch (clockwise order).
*/
std::vector< Geom::Point > SPMeshPatchI::getPointsForSide( uint i ) {
assert( i < 4 );
std::vector< Geom::Point> points;
points.push_back( getPoint( i, 0 ) );
points.push_back( getPoint( i, 1 ) );
points.push_back( getPoint( i, 2 ) );
points.push_back( getPoint( i, 3 ) );
return points;
};
/**
Set point for side in proper order for patch
*/
void SPMeshPatchI::setPoint( uint s, uint pt, Geom::Point p, bool set ) {
assert( s < 4 );
assert( pt < 4 );
NodeType node_type = MG_NODE_TYPE_CORNER;
if( pt == 1 || pt == 2 ) node_type = MG_NODE_TYPE_HANDLE;
// std::cout << "SPMeshPatchI::setPoint: s: " << s
// << " pt: " << pt
// << " p: " << p
// << " node_type: " << node_type
// << " set: " << set
// << " row: " << row
// << " col: " << col << std::endl;
switch ( s ) {
case 0:
(*nodes)[ row ][ col+pt ]->p = p;
(*nodes)[ row ][ col+pt ]->set = set;
(*nodes)[ row ][ col+pt ]->node_type = node_type;
break;
case 1:
(*nodes)[ row+pt ][ col+3 ]->p = p;
(*nodes)[ row+pt ][ col+3 ]->set = set;
(*nodes)[ row+pt ][ col+3 ]->node_type = node_type;
break;
case 2:
(*nodes)[ row+3 ][ col+3-pt ]->p = p;
(*nodes)[ row+3 ][ col+3-pt ]->set = set;
(*nodes)[ row+3 ][ col+3-pt ]->node_type = node_type;
break;
case 3:
(*nodes)[ row+3-pt ][ col ]->p = p;
(*nodes)[ row+3-pt ][ col ]->set = set;
(*nodes)[ row+3-pt ][ col ]->node_type = node_type;
break;
}
};
/**
Get path type for side (stored in handle nodes).
*/
gchar SPMeshPatchI::getPathType( uint s ) {
assert( s < 4 );
gchar type = 'x';
switch ( s ) {
case 0:
type = (*nodes)[ row ][ col+1 ]->path_type;
break;
case 1:
type = (*nodes)[ row+1 ][ col+3 ]->path_type;
break;
case 2:
type = (*nodes)[ row+3 ][ col+2 ]->path_type;
break;
case 3:
type = (*nodes)[ row+2 ][ col ]->path_type;
break;
}
return type;
};
/**
Set path type for side (stored in handle nodes).
*/
void SPMeshPatchI::setPathType( uint s, gchar t ) {
assert( s < 4 );
switch ( s ) {
case 0:
(*nodes)[ row ][ col+1 ]->path_type = t;
(*nodes)[ row ][ col+2 ]->path_type = t;
break;
case 1:
(*nodes)[ row+1 ][ col+3 ]->path_type = t;
(*nodes)[ row+2 ][ col+3 ]->path_type = t;
break;
case 2:
(*nodes)[ row+3 ][ col+1 ]->path_type = t;
(*nodes)[ row+3 ][ col+2 ]->path_type = t;
break;
case 3:
(*nodes)[ row+1 ][ col ]->path_type = t;
(*nodes)[ row+2 ][ col ]->path_type = t;
break;
}
};
/**
Set tensor control point for "corner" i.
*/
void SPMeshPatchI::setTensorPoint( uint i, Geom::Point p ) {
assert( i < 4 );
switch ( i ) {
case 0:
(*nodes)[ row + 1 ][ col + 1 ]->p = p;
(*nodes)[ row + 1 ][ col + 1 ]->set = true;
(*nodes)[ row + 1 ][ col + 1 ]->node_type = MG_NODE_TYPE_TENSOR;
break;
case 1:
(*nodes)[ row + 1 ][ col + 2 ]->p = p;
(*nodes)[ row + 1 ][ col + 2 ]->set = true;
(*nodes)[ row + 1 ][ col + 2 ]->node_type = MG_NODE_TYPE_TENSOR;
break;
case 2:
(*nodes)[ row + 2 ][ col + 2 ]->p = p;
(*nodes)[ row + 2 ][ col + 2 ]->set = true;
(*nodes)[ row + 2 ][ col + 2 ]->node_type = MG_NODE_TYPE_TENSOR;
break;
case 3:
(*nodes)[ row + 2 ][ col + 1 ]->p = p;
(*nodes)[ row + 2 ][ col + 1 ]->set = true;
(*nodes)[ row + 2 ][ col + 1 ]->node_type = MG_NODE_TYPE_TENSOR;
break;
}
}
/**
Return if any tensor control point is set.
*/
bool SPMeshPatchI::tensorIsSet() {
for( uint i = 0; i < 4; ++i ) {
if( tensorIsSet( i ) ) {
return true;
}
}
return false;
}
/**
Return if tensor control point for "corner" i is set.
*/
bool SPMeshPatchI::tensorIsSet( uint i ) {
assert( i < 4 );
bool set = false;
switch ( i ) {
case 0:
set = (*nodes)[ row + 1 ][ col + 1 ]->set;
break;
case 1:
set = (*nodes)[ row + 1 ][ col + 2 ]->set;
break;
case 2:
set = (*nodes)[ row + 2 ][ col + 2 ]->set;
break;
case 3:
set = (*nodes)[ row + 2 ][ col + 1 ]->set;
break;
}
return set;
}
/**
Return tensor control point for "corner" i.
If not sest, returns calculated (Coons) point.
*/
Geom::Point SPMeshPatchI::getTensorPoint( uint k ) {
assert( k < 4 );
uint i, j;
switch ( k ) {
case 0:
i = 1; j = 1;
break;
case 1:
i = 1; j = 2;
break;
case 2:
i = 2; j = 2;
break;
case 3:
i = 2; j = 1;
break;
}
Geom::Point p;
if( (*nodes)[ row + i ][ col + j ]->set ) {
p = (*nodes)[ row + i ][ col + j ]->p;
} else {
p = coonsTensorPoint( k );
}
return p;
}
/**
Find default tensor point (equivalent point to Coons Patch).
Formulas defined in PDF spec.
Equivalent to 1/3 of side length from corner for square patch.
*/
Geom::Point SPMeshPatchI::coonsTensorPoint( uint i ) {
Geom::Point t;
Geom::Point p[4][4]; // Points in PDF notation
p[0][0] = getPoint( 0, 0 );
p[0][1] = getPoint( 0, 1 );
p[0][2] = getPoint( 0, 2 );
p[0][3] = getPoint( 0, 3 );
p[1][0] = getPoint( 3, 2 );
p[1][3] = getPoint( 1, 1 );
p[2][0] = getPoint( 3, 1 );
p[2][3] = getPoint( 1, 2 );
p[3][0] = getPoint( 2, 3 );
p[3][1] = getPoint( 2, 2 );
p[3][2] = getPoint( 2, 1 );
p[3][3] = getPoint( 2, 0 );
switch ( i ) {
case 0:
t = ( -4.0 * p[0][0] +
6.0 * ( p[0][1] + p[1][0] ) +
-2.0 * ( p[0][3] + p[3][0] ) +
3.0 * ( p[3][1] + p[1][3] ) +
-1.0 * p[3][3] ) / 9.0;
break;
case 1:
t = ( -4.0 * p[0][3] +
6.0 * ( p[0][2] + p[1][3] ) +
-2.0 * ( p[0][0] + p[3][3] ) +
3.0 * ( p[3][2] + p[1][0] ) +
-1.0 * p[3][0] ) / 9.0;
break;
case 2:
t = ( -4.0 * p[3][3] +
6.0 * ( p[3][2] + p[2][3] ) +
-2.0 * ( p[3][0] + p[0][3] ) +
3.0 * ( p[0][2] + p[2][0] ) +
-1.0 * p[0][0] ) / 9.0;
break;
case 3:
t = ( -4.0 * p[3][0] +
6.0 * ( p[3][1] + p[2][0] ) +
-2.0 * ( p[3][3] + p[0][0] ) +
3.0 * ( p[0][1] + p[2][3] ) +
-1.0 * p[0][3] ) / 9.0;
break;
default:
g_warning( "Impossible!" );
}
return t;
}
/**
Update default values for handle and tensor nodes.
*/
void SPMeshPatchI::updateNodes() {
// std::cout << "SPMeshPatchI::updateNodes: " << row << "," << col << std::endl;
// Handles first (tensors require update handles).
for( uint i = 0; i < 4; ++i ) {
for( uint j = 0; j < 4; ++j ) {
if( (*nodes)[ row + i ][ col + j ]->set == false ) {
if( (*nodes)[ row + i ][ col + j ]->node_type == MG_NODE_TYPE_HANDLE ) {
// If a handle is not set it is because the side is a line.
// Set node points 1/3 of the way between corners.
if( i == 0 || i == 3 ) {
Geom::Point p0 = ( (*nodes)[ row + i ][ col ]->p );
Geom::Point p3 = ( (*nodes)[ row + i ][ col + 3 ]->p );
Geom::Point dp = (p3 - p0)/3.0;
if( j == 2 ) dp *= 2.0;
(*nodes)[ row + i ][ col + j ]->p = p0 + dp;
}
if( j == 0 || j == 3 ) {
Geom::Point p0 = ( (*nodes)[ row ][ col + j ]->p );
Geom::Point p3 = ( (*nodes)[ row + 3 ][ col + j ]->p );
Geom::Point dp = (p3 - p0)/3.0;
if( i == 2 ) dp *= 2.0;
(*nodes)[ row + i ][ col + j ]->p = p0 + dp;
}
}
}
}
}
// Update tensor nodes
for( uint i = 1; i < 3; ++i ) {
for( uint j = 1; j < 3; ++j ) {
if( (*nodes)[ row + i ][ col + j ]->set == false ) {
(*nodes)[ row + i ][ col + j ]->node_type = MG_NODE_TYPE_TENSOR;
uint t = 0;
if( i == 1 && j == 2 ) t = 1;
if( i == 2 && j == 2 ) t = 2;
if( i == 2 && j == 1 ) t = 3;
(*nodes)[ row + i ][ col + j ]->p = coonsTensorPoint( t );
// std::cout << "Update node: " << i << ", " << j << " " << coonsTensorPoint( t ) << std::endl;
}
}
}
}
/**
Return color for corner of patch.
*/
SPColor SPMeshPatchI::getColor( uint i ) {
assert( i < 4 );
SPColor color;
switch ( i ) {
case 0:
color = (*nodes)[ row ][ col ]->color;
break;
case 1:
color = (*nodes)[ row ][ col+3 ]->color;
break;
case 2:
color = (*nodes)[ row+3 ][ col+3 ]->color;
break;
case 3:
color = (*nodes)[ row+3 ][ col ]->color;
break;
}
return color;
};
/**
Set color for corner of patch.
*/
void SPMeshPatchI::setColor( uint i, SPColor color ) {
assert( i < 4 );
switch ( i ) {
case 0:
(*nodes)[ row ][ col ]->color = color;
break;
case 1:
(*nodes)[ row ][ col+3 ]->color = color;
break;
case 2:
(*nodes)[ row+3 ][ col+3 ]->color = color;
break;
case 3:
(*nodes)[ row+3 ][ col ]->color = color;
break;
}
};
/**
Return opacity for corner of patch.
*/
gdouble SPMeshPatchI::getOpacity( uint i ) {
assert( i < 4 );
gdouble opacity;
switch ( i ) {
case 0:
opacity = (*nodes)[ row ][ col ]->opacity;
break;
case 1:
opacity = (*nodes)[ row ][ col+3 ]->opacity;
break;
case 2:
opacity = (*nodes)[ row+3 ][ col+3 ]->opacity;
break;
case 3:
opacity = (*nodes)[ row+3 ][ col ]->opacity;
break;
}
return opacity;
};
/**
Set opacity for corner of patch.
*/
void SPMeshPatchI::setOpacity( uint i, gdouble opacity ) {
assert( i < 4 );
switch ( i ) {
case 0:
(*nodes)[ row ][ col ]->opacity = opacity;
break;
case 1:
(*nodes)[ row ][ col+3 ]->opacity = opacity;
break;
case 2:
(*nodes)[ row+3 ][ col+3 ]->opacity = opacity;
break;
case 3:
(*nodes)[ row+3 ][ col ]->opacity = opacity;
break;
}
};
SPMeshNodeArray::SPMeshNodeArray( SPMeshGradient *mg ) {
read( mg );
};
void SPMeshNodeArray::read( SPMeshGradient *mg_in ) {
mg = mg_in;
clear();
Geom::Point current_p( mg->x.computed, mg->y.computed );
// std::cout << "SPMeshNodeArray::read: p: " << current_p << std::endl;
uint max_column = 0;
uint irow = 0; // Corresponds to top of patch being read in.
for ( SPObject *ro = mg->firstChild() ; ro ; ro = ro->getNext() ) {
if (SP_IS_MESHROW(ro)) {
uint icolumn = 0; // Corresponds to left of patch being read in.
for ( SPObject *po = ro->firstChild() ; po ; po = po->getNext() ) {
if (SP_IS_MESHPATCH(po)) {
SPMeshPatch *patch = SP_MESHPATCH(po);
// std::cout << "SPMeshNodeArray::read: row size: " << nodes.size() << std::endl;
SPMeshPatchI new_patch( &nodes, irow, icolumn ); // Adds new nodes.
// std::cout << " after: " << nodes.size() << std::endl;
gint istop = 0;
// Only 'top' side defined for first row.
if( irow != 0 ) ++istop;
for ( SPObject *so = po->firstChild() ; so ; so = so->getNext() ) {
if (SP_IS_STOP(so)) {
if( istop > 3 ) {
// std::cout << " Mesh Gradient: Too many stops: " << istop << std::endl;
break;
}
SPStop *stop = SP_STOP(so);
// Handle top of first row.
if( istop == 0 && icolumn == 0 ) {
// First patch in mesh.
new_patch.setPoint( 0, 0, current_p );
}
// First point is always already defined by previous side (stop).
current_p = new_patch.getPoint( istop, 0 );
// If side closes patch, then we read one less point.
bool closed = false;
if( icolumn == 0 && istop == 3 ) closed = true;
if( icolumn > 0 && istop == 2 ) closed = true;
// Copy path and then replace commas by spaces so we can use stringstream to parse
std::string path_string = *(stop->path_string);
std::replace(path_string.begin(),path_string.end(),',',' ');
// std::cout << " path_string: " << path_string << std::endl;
// std::cout << " current_p: " << current_p << std::endl;
std::stringstream os( path_string );
// Determine type of path
char path_type;
os >> path_type;
new_patch.setPathType( istop, path_type );
gdouble x, y;
Geom::Point p, dp;
uint max;
switch ( path_type ) {
case 'l':
if( !closed ) {
os >> x >> y;
if( !os.fail() ) {
dp = Geom::Point( x, y );
new_patch.setPoint( istop, 3, current_p + dp );
} else {
std::cout << "Failed to read l" << std::endl;
}
}
// To facilitate some side operations, set handles to 1/3 and
// 2/3 distance between corner points but flag as unset.
p = new_patch.getPoint( istop, 3 );
dp = (p - current_p)/3.0; // Calculate since may not be set if closed.
// std::cout << " istop: " << istop
// << " dp: " << dp
// << " p: " << p
// << " current_p: " << current_p
// << std::endl;
new_patch.setPoint( istop, 1, current_p + dp, false );
new_patch.setPoint( istop, 2, current_p + 2.0 * dp, false );
break;
case 'L':
if( !closed ) {
os >> x >> y;
if( !os.fail() ) {
p = Geom::Point( x, y );
new_patch.setPoint( istop, 3, p );
} else {
std::cout << "Failed to read L" << std::endl;
}
}
// To facilitate some side operations, set handles to 1/3 and
// 2/3 distance between corner points but flag as unset.
p = new_patch.getPoint( istop, 3 );
dp = (p - current_p)/3.0;
new_patch.setPoint( istop, 1, current_p + dp, false );
new_patch.setPoint( istop, 2, current_p + 2.0 * dp, false );
break;
case 'c':
max = 4;
if( closed ) max = 3;
for( uint i = 1; i < max; ++i ) {
os >> x >> y;
if( !os.fail() ) {
p = Geom::Point( x, y );
p += current_p;
new_patch.setPoint( istop, i, p );
} else {
std::cout << "Failed to read c: " << i << std::endl;
}
}
break;
case 'C':
max = 4;
if( closed ) max = 3;
for( uint i = 1; i < max; ++i ) {
os >> x >> y;
if( !os.fail() ) {
p = Geom::Point( x, y );
new_patch.setPoint( istop, i, p );
} else {
std::cout << "Failed to read C: " << i << std::endl;
}
}
break;
default:
// should not reach
std::cout << "Path Error: unhandled path type: " << path_type << std::endl;
}
current_p = new_patch.getPoint( istop, 3 );
// Color
if( (istop == 0 && irow == 0 && icolumn > 0) || (istop == 1 && irow > 0 ) ) {
// skip
} else {
SPColor color = stop->getEffectiveColor();
double opacity = stop->opacity;
new_patch.setColor( istop, color );
new_patch.setOpacity( istop, opacity );
}
}
++istop;
} // Loop over stops
// Read in tensor string after stops since tensor nodes defined relative to corner nodes.
// Copy string and then replace commas by spaces so we can use stringstream to parse XXXX
if( patch->tensor_string ) {
std::string tensor_string = *(patch->tensor_string);
std::replace(tensor_string.begin(),tensor_string.end(),',',' ');
// std::cout << " tensor_string: " << tensor_string << std::endl;
std::stringstream os( tensor_string );
for( uint i = 0; i < 4; ++i ) {
double x = 0.0;
double y = 0.0;
os >> x >> y;
if( !os.fail() ) {
new_patch.setTensorPoint( i, new_patch.getPoint( i, 0 ) + Geom::Point( x, y ) );
} else {
std::cout << "Failed to read p: " << i << std::endl;
break;
}
}
}
}
++icolumn;
if( max_column < icolumn ) max_column = icolumn;
}
}
++irow;
}
// Insure we have a true array.
for( uint i = 0; i < nodes.size(); ++i ) {
nodes[ i ].resize( max_column * 3 + 1 );
}
// Set node edge.
for( uint i = 0; i < nodes.size(); ++i ) {
for( uint j = 0; j < nodes[i].size(); ++j ) {
nodes[i][j]->node_edge = MG_NODE_EDGE_NONE;
if( i == 0 ) nodes[i][j]->node_edge |= MG_NODE_EDGE_TOP;
if( i == nodes.size() - 1 ) nodes[i][j]->node_edge |= MG_NODE_EDGE_BOTTOM;
if( j == 0 ) nodes[i][j]->node_edge |= MG_NODE_EDGE_RIGHT;
if( j == nodes[i].size() - 1 ) nodes[i][j]->node_edge |= MG_NODE_EDGE_LEFT;
}
}
// std::cout << "SPMeshNodeArray::Read: result:" << std::endl;
// print();
drag_valid = false;
built = true;
};
/**
Write repr using our array.
*/
void SPMeshNodeArray::write( SPMeshGradient *mg ) {
// std::cout << "SPMeshNodeArray::write: entrance:" << std::endl;
// print();
using Geom::X;
using Geom::Y;
// First we must delete reprs for old mesh rows and patches.
GSList *descendant_reprs = NULL;
GSList *descendant_objects = NULL;
for ( SPObject *row = mg->firstChild(); row; row = row->getNext() ) {
descendant_reprs = g_slist_prepend (descendant_reprs, row->getRepr());
descendant_objects = g_slist_prepend (descendant_objects, row );
for ( SPObject *patch = row->firstChild(); patch; patch = patch->getNext() ) {
descendant_reprs = g_slist_prepend (descendant_reprs, patch->getRepr());
descendant_objects = g_slist_prepend (descendant_objects, patch );
for ( SPObject *stop = patch->firstChild(); stop; stop = stop->getNext() ) {
descendant_reprs = g_slist_prepend (descendant_reprs, stop->getRepr());
descendant_objects = g_slist_prepend (descendant_objects, stop );
}
}
}
for ( GSList *i = descendant_objects; i != NULL; i = i->next ) {
SPObject *descendant = SP_OBJECT (i->data);
descendant->deleteObject();
}
for ( GSList *i = descendant_reprs; i != NULL; i = i->next ) {
Inkscape::XML::Node *repr = (Inkscape::XML::Node *) i->data;
sp_repr_unparent( repr );
}
// Now we build new reprs
Inkscape::XML::Node *mesh = mg->getRepr();
SPMeshNodeArray* array = &(mg->array);
SPMeshPatchI patch0( &(array->nodes), 0, 0 );
Geom::Point current_p = patch0.getPoint( 0, 0 ); // Side 0, point 0
sp_repr_set_svg_double( mesh, "x", current_p[X] );
sp_repr_set_svg_double( mesh, "y", current_p[Y] );
Geom::Point current_p2( mg->x.computed, mg->y.computed );
Inkscape::XML::Document *xml_doc = mesh->document();
uint rows = array->patch_rows();
for( uint i = 0; i < rows; ++i ) {
// Write row
Inkscape::XML::Node *row = xml_doc->createElement("svg:meshRow");
mesh->appendChild( row ); // No attributes
uint columns = array->patch_columns();
for( uint j = 0; j < columns; ++j ) {
// Write patch
Inkscape::XML::Node *patch = xml_doc->createElement("svg:meshPatch");
SPMeshPatchI patchi( &(array->nodes), i, j );
// Add tensor
if( patchi.tensorIsSet() ) {
std::stringstream is;
for( uint k = 0; k < 4; ++k ) {
Geom::Point p = patchi.getTensorPoint( k ) - patchi.getPoint( k, 0 );
is << p[X] << "," << p[Y];
if( k < 3 ) is << " ";
}
patch->setAttribute("tensor", is.str().c_str());
// std::cout << " SPMeshNodeArray::write: tensor: " << is.str() << std::endl;
}
row->appendChild( patch );
// Write sides
for( uint k = 0; k < 4; ++k ) {
// Only first row has top stop
if( k == 0 && i != 0 ) continue;
// Only first column has left stop
if( k == 3 && j != 0 ) continue;
Inkscape::XML::Node *stop = xml_doc->createElement("svg:stop");
// Add path
std::stringstream is;
char path_type = patchi.getPathType( k );
is << path_type;
std::vector< Geom::Point> p = patchi.getPointsForSide( k );
current_p = patchi.getPoint( k, 0 );
switch ( path_type ) {
case 'l':
is << " "
<< ( p[3][X] - current_p[X] ) << ","
<< ( p[3][Y] - current_p[Y] );
break;
case 'L':
is << " "
<< p[3][X] << ","
<< p[3][Y];
break;
case 'c':
is << " "
<< ( p[1][X] - current_p[X] ) << ","
<< ( p[1][Y] - current_p[Y] ) << " "
<< ( p[2][X] - current_p[X] ) << ","
<< ( p[2][Y] - current_p[Y] ) << " "
<< ( p[3][X] - current_p[X] ) << ","
<< ( p[3][Y] - current_p[Y] );
break;
case 'C':
is << " "
<< p[1][X] << ","
<< p[1][Y] << " "
<< p[2][X] << ","
<< p[2][Y] << " "
<< p[3][X] << ","
<< p[3][Y];
break;
case 'z':
case 'Z':
std::cout << "sp_meshgradient_repr_write: bad path type" << path_type << std::endl;
break;
default:
std::cout << "sp_meshgradient_repr_write: unhandled path type" << path_type << std::endl;
}
stop->setAttribute("path", is.str().c_str());
// std::cout << "SPMeshNodeArray::write: path: " << is.str().c_str() << std::endl;
// Add stop-color
if( ( k == 0 && i == 0 && j == 0 ) ||
( k == 1 && i == 0 ) ||
( k == 2 ) ||
( k == 3 && j == 0 ) ) {
// Why are we setting attribute and not style?
//stop->setAttribute("stop-color", patchi.getColor(k).toString().c_str() );
//stop->setAttribute("stop-opacity", patchi.getOpacity(k) );
Inkscape::CSSOStringStream os;
os << "stop-color:" << patchi.getColor(k).toString() << ";stop-opacity:" << patchi.getOpacity(k);
stop->setAttribute("style", os.str().c_str());
}
patch->appendChild( stop );
}
}
}
}
/**
Find default color based on color of first stop in "vector" gradient.
This should be rewritten if dependence on "vector" is removed.
*/
SPColor default_color( SPItem *item ) {
// Set initial color to the color of the object before adding the mesh.
// This is a bit tricky as at the moment, a "vector" gradient is created
// before reaching here, replacing the original solid color. But the first
// stop will be that of the original object color.
SPColor color( 0.5, 0.0, 0.5 );
if ( item->style ) {
SPStyle const &style = *(item->style);
SPIPaint const &paint = ( style.fill ); // Could pick between style.fill/style.stroke
if ( paint.isColor() ) {
color = paint.value.color;
} else if ( paint.isPaintserver() ) {
SPObject const *server = style.getFillPaintServer();
if ( SP_IS_GRADIENT(server) ) {
SPGradient *vector = SP_GRADIENT( server )->getVector();
SPStop *firstStop = (vector) ?
vector->getFirstStop() : SP_GRADIENT( server )->getFirstStop();
if ( firstStop ) {
if (firstStop->currentColor) {
Glib::ustring str = firstStop->getStyleProperty("color", NULL);
if( !str.empty() ) {
guint32 rgb = sp_svg_read_color( str.c_str(), 0 );
color = SPColor( rgb );
}
} else {
color = firstStop->specified_color;
}
}
}
}
} else {
std::cout << " SPMeshNodeArray: No style" << std::endl;
}
return color;
}
/**
Create a default mesh.
*/
void SPMeshNodeArray::create( SPMeshGradient *mg, SPItem *item, Geom::OptRect bbox ) {
// std::cout << "SPMeshNodeArray::create: Entrance" << std::endl;
if( !bbox ) {
// Set default size to bounding box if size not given.
std::cout << "SPMeshNodeArray::create(): bbox empty" << std::endl;
Geom::OptRect bbox = item->geometricBounds();
}
if( !bbox ) {
std::cout << "SPMeshNodeArray::create: ERROR: No bounding box!" << std::endl;
return;
}
Geom::Coord const width = bbox->dimensions()[Geom::X];
Geom::Coord const height = bbox->dimensions()[Geom::Y];
Geom::Point center = bbox->midpoint();
// Must keep repr and array in sync. We have two choices:
// Build the repr first and the "read" it.
// Construct the array and the "write" it.
// We'll do the second.
// Remove any existing mesh. We could chose to simply scale an existing mesh...
//clear();
// We get called twice when a new mesh is created...WHY?
// return if we've already constructed the mesh.
if( nodes.size() != 0 ) return;
// Get default color
SPColor color = default_color( item );
// Get preferences
Inkscape::Preferences *prefs = Inkscape::Preferences::get();
uint prows = prefs->getInt("/tools/mesh/mesh_rows", 1);
uint pcols = prefs->getInt("/tools/mesh/mesh_cols", 1);
SPGradientMeshType mesh_type =
(SPGradientMeshType) prefs->getInt("/tools/mesh/mesh_type", SP_GRADIENT_MESH_TYPE_NORMAL);
if( mesh_type == SP_GRADIENT_MESH_TYPE_CONICAL ) {
// Conical gradient.. for any shape/path using geometric bounding box.
gdouble rx = width/2.0;
gdouble ry = height/2.0;
// Start and end angles
gdouble start = 0.0;
gdouble end = 2.0 * M_PI;
if ( SP_IS_STAR( item ) ) {
// But if it is a star... use star parameters!
SPStar* star = SP_STAR( item );
center = star->center;
rx = star->r[0];
ry = star->r[0];
start = star->arg[0];
end = start + 2.0 * M_PI;
}
if ( SP_IS_ARC( item ) ) {
// For arcs use set start/stop
SPArc* arc = SP_ARC( item );
center[Geom::X] = arc->cx.computed;
center[Geom::Y] = arc->cy.computed;
rx = arc->rx.computed;
ry = arc->ry.computed;
start = arc->start;
end = arc->end;
}
// std::cout << " start: " << start << " end: " << end << std::endl;
// IS THIS NECESSARY?
Inkscape::XML::Node *repr = mg->getRepr();
sp_repr_set_svg_double( repr, "x", center[Geom::X] + rx * cos(start) );
sp_repr_set_svg_double( repr, "y", center[Geom::Y] + ry * sin(start) );
uint sections = pcols;
// If less sections, arc approximation error too great. (Check!)
if( sections < 4 ) sections = 4;
double arc = (end - start) / (double)sections;
// See: http://en.wikipedia.org/wiki/B%C3%A9zier_curve
gdouble kappa = 4.0/3.0 * tan(arc/4.0);
gdouble lenx = rx * kappa;
gdouble leny = ry * kappa;
gdouble s = start;
for( uint i = 0; i < sections; ++i ) {
SPMeshPatchI patch( &nodes, 0, i );
gdouble x0 = center[Geom::X] + rx * cos(s);
gdouble y0 = center[Geom::Y] + ry * sin(s);
gdouble x1 = x0 - lenx * sin(s);
gdouble y1 = y0 + leny * cos(s);
s += arc;
gdouble x3 = center[Geom::X] + rx * cos(s);
gdouble y3 = center[Geom::Y] + ry * sin(s);
gdouble x2 = x3 + lenx * sin(s);
gdouble y2 = y3 - leny * cos(s);
patch.setPoint( 0, 0, Geom::Point( x0, y0 ) );
patch.setPoint( 0, 1, Geom::Point( x1, y1 ) );
patch.setPoint( 0, 2, Geom::Point( x2, y2 ) );
patch.setPoint( 0, 3, Geom::Point( x3, y3 ) );
patch.setPoint( 2, 0, center );
patch.setPoint( 3, 0, center );
for( uint k = 0; k < 4; ++k ) {
patch.setPathType( k, 'l' );
patch.setColor( k, color );
patch.setOpacity( k, 1.0 );
}
patch.setPathType( 0, 'c' );
// Set handle and tensor nodes.
patch.updateNodes();
}
split_row( 0, prows );
} else {
// Normal grid meshes
if( SP_IS_ARC( item ) ) {
// std::cout << "We've got ourselves an arc!" << std::endl;
SPArc* arc = SP_ARC( item );
center[Geom::X] = arc->cx.computed;
center[Geom::Y] = arc->cy.computed;
gdouble rx = arc->rx.computed;
gdouble ry = arc->ry.computed;
gdouble s = -3.0/2.0 * M_PI_2;
Inkscape::XML::Node *repr = mg->getRepr();
sp_repr_set_svg_double( repr, "x", center[Geom::X] + rx * cos(s) );
sp_repr_set_svg_double( repr, "y", center[Geom::Y] + ry * sin(s) );
gdouble lenx = rx * 4*tan(M_PI_2/4)/3;
gdouble leny = ry * 4*tan(M_PI_2/4)/3;
SPMeshPatchI patch( &nodes, 0, 0 );
for( uint i = 0; i < 4; ++i ) {
gdouble x0 = center[Geom::X] + rx * cos(s);
gdouble y0 = center[Geom::Y] + ry * sin(s);
gdouble x1 = x0 + lenx * cos(s + M_PI_2);
gdouble y1 = y0 + leny * sin(s + M_PI_2);
s += M_PI_2;
gdouble x3 = center[Geom::X] + rx * cos(s);
gdouble y3 = center[Geom::Y] + ry * sin(s);
gdouble x2 = x3 + lenx * cos(s - M_PI_2);
gdouble y2 = y3 + leny * sin(s - M_PI_2);
Geom::Point p1( x1, y1 );
Geom::Point p2( x2, y2 );
Geom::Point p3( x3, y3 );
patch.setPoint( i, 1, p1 );
patch.setPoint( i, 2, p2 );
patch.setPoint( i, 3, p3 );
patch.setPathType( i, 'c' );
patch.setColor( i, color );
patch.setOpacity( i, 1.0 );
}
// Fill out tensor points
patch.updateNodes();
split_row( 0, prows );
split_column( 0, pcols );
// END Arc
} else if ( SP_IS_STAR( item ) ) {
// Do simplest thing... assume star is not rounded or randomized.
// (It should be easy to handle the rounded/randomized cases by making
// the appropriate star class function public.)
SPStar* star = SP_STAR( item );
uint sides = star->sides;
// std::cout << "We've got ourselves an star! Sides: " << sides << std::endl;
Geom::Point p0 = sp_star_get_xy( star, SP_STAR_POINT_KNOT1, 0 );
Inkscape::XML::Node *repr = mg->getRepr();
sp_repr_set_svg_double( repr, "x", p0[Geom::X] );
sp_repr_set_svg_double( repr, "y", p0[Geom::Y] );
for( uint i = 0; i < sides; ++i ) {
if( star->flatsided ) {
SPMeshPatchI patch( &nodes, 0, i );
patch.setPoint( 0, 0, sp_star_get_xy( star, SP_STAR_POINT_KNOT1, i ) );
uint ii = i+1;
if( ii == sides ) ii = 0;
patch.setPoint( 1, 0, sp_star_get_xy( star, SP_STAR_POINT_KNOT1, ii ) );
patch.setPoint( 2, 0, star->center );
patch.setPoint( 3, 0, star->center );
for( uint s = 0; s < 4; ++s ) {
patch.setPathType( s, 'l' );
patch.setColor( s, color );
patch.setOpacity( s, 1.0 );
}
// Set handle and tensor nodes.
patch.updateNodes();
} else {
SPMeshPatchI patch0( &nodes, 0, 2*i );
patch0.setPoint( 0, 0, sp_star_get_xy( star, SP_STAR_POINT_KNOT1, i ) );
patch0.setPoint( 1, 0, sp_star_get_xy( star, SP_STAR_POINT_KNOT2, i ) );
patch0.setPoint( 2, 0, star->center );
patch0.setPoint( 3, 0, star->center );
uint ii = i+1;
if( ii == sides ) ii = 0;
SPMeshPatchI patch1( &nodes, 0, 2*i+1 );
patch1.setPoint( 0, 0, sp_star_get_xy( star, SP_STAR_POINT_KNOT2, i ) );
patch1.setPoint( 1, 0, sp_star_get_xy( star, SP_STAR_POINT_KNOT1, ii ) );
patch1.setPoint( 2, 0, star->center );
patch1.setPoint( 3, 0, star->center );
for( uint s = 0; s < 4; ++s ) {
patch0.setPathType( s, 'l' );
patch0.setColor( s, color );
patch0.setOpacity( s, 1.0 );
patch1.setPathType( s, 'l' );
patch1.setColor( s, color );
patch1.setOpacity( s, 1.0 );
}
// Set handle and tensor nodes.
patch0.updateNodes();
patch1.updateNodes();
}
}
//print();
split_row( 0, prows );
//split_column( 0, pcols );
} else {
// Generic
Inkscape::XML::Node *repr = mg->getRepr();
sp_repr_set_svg_double(repr, "x", bbox->min()[Geom::X]);
sp_repr_set_svg_double(repr, "y", bbox->min()[Geom::Y]);
// Get node array size
uint nrows = prows * 3 + 1;
uint ncols = pcols * 3 + 1;
gdouble dx = width / (gdouble)(ncols-1.0);
gdouble dy = height / (gdouble)(nrows-1.0);
Geom::Point p0( mg->x.computed, mg->y.computed );
for( uint i = 0; i < nrows; ++i ) {
std::vector< SPMeshNode* > row;
for( uint j = 0; j < ncols; ++j ) {
SPMeshNode* node = new SPMeshNode;
node->p = p0 + Geom::Point( j * dx, i * dy );
node->node_edge = MG_NODE_EDGE_NONE;
if( i == 0 ) node->node_edge |= MG_NODE_EDGE_TOP;
if( i == nrows -1 ) node->node_edge |= MG_NODE_EDGE_BOTTOM;
if( j == 0 ) node->node_edge |= MG_NODE_EDGE_LEFT;
if( j == ncols -1 ) node->node_edge |= MG_NODE_EDGE_RIGHT;
if( i%3 == 0 ) {
if( j%3 == 0) {
// Corner
node->node_type = MG_NODE_TYPE_CORNER;
node->set = true;
node->color = color;
node->opacity = 1.0;
} else {
// Side
node->node_type = MG_NODE_TYPE_HANDLE;
node->set = true;
node->path_type = 'c';
}
} else {
if( j%3 == 0) {
// Side
node->node_type = MG_NODE_TYPE_HANDLE;
node->set = true;
node->path_type = 'c';
} else {
// Tensor
node->node_type = MG_NODE_TYPE_TENSOR;
node->set = false;
}
}
row.push_back( node );
}
nodes.push_back( row );
}
// End normal
}
} // If conical
//print();
// Write repr
write( mg );
}
/**
Clear mesh gradient.
*/
void SPMeshNodeArray::clear() {
for( uint i = 0; i < nodes.size(); ++i ) {
for( uint j = 0; j < nodes[i].size(); ++j ) {
if( nodes[i][j] ) {
delete nodes[i][j];
}
}
for( uint i = 0; i < nodes.size(); ++i ) {
nodes[i].clear();
}
nodes.clear();
}
};
/**
Print mesh gradient (for debugging).
*/
void SPMeshNodeArray::print() {
for( uint i = 0; i < nodes.size(); ++i ) {
std::cout << "New node row:" << std::endl;
for( uint j = 0; j < nodes[i].size(); ++j ) {
if( nodes[i][j] ) {
std::cout.width(4);
std::cout << " Node: " << i << "," << j << ": "
<< nodes[i][j]->p
<< " Node type: " << nodes[i][j]->node_type
<< " Node edge: " << nodes[i][j]->node_edge
<< " Set: " << nodes[i][j]->set
<< " Path type: " << nodes[i][j]->path_type
<< std::endl;
} else {
std::cout << "Error: missing mesh node." << std::endl;
}
} // Loop over patches
} // Loop over rows
};
/**
Number of patch rows.
*/
uint SPMeshNodeArray::patch_rows() {
return nodes.size()/3;
}
/**
Number of patch columns.
*/
uint SPMeshNodeArray::patch_columns() {
return nodes[0].size()/3;
}
/**
Inputs:
i, j: Corner draggable indices.
Returns:
true if corners adjacent.
n[] is array of nodes in top/bottom or left/right order.
*/
bool SPMeshNodeArray::adjacent_corners( uint i, uint j, SPMeshNode* n[4] ) {
// This works as all corners have indices and they
// are numbered in order by row and column (and
// the node array is rectangular).
bool adjacent = false;
uint c1 = i;
uint c2 = j;
if( j < i ) {
c1 = j;
c2 = i;
}
// Number of corners in a row of patches.
uint ncorners = patch_columns() + 1;
uint crow1 = c1 / ncorners;
uint crow2 = c2 / ncorners;
uint ccol1 = c1 % ncorners;
uint ccol2 = c2 % ncorners;
uint nrow = crow1 * 3;
uint ncol = ccol1 * 3;
// std::cout << " i: " << i
// << " j: " << j
// << " ncorners: " << ncorners
// << " c1: " << c1
// << " crow1: " << crow1
// << " ccol1: " << ccol1
// << " c2: " << c2
// << " crow2: " << crow2
// << " ccol2: " << ccol2
// << " nrow: " << nrow
// << " ncol: " << ncol
// << std::endl;
// Check for horizontal neighbors
if ( crow1 == crow2 && (ccol2 - ccol1) == 1 ) {
adjacent = true;
for( uint k = 0; k < 4; ++k ) {
n[k] = nodes[nrow][ncol+k];
}
}
// Check for vertical neighbors
if ( ccol1 == ccol2 && (crow2 - crow1) == 1 ) {
adjacent = true;
for( uint k = 0; k < 4; ++k ) {
n[k] = nodes[nrow+k][ncol];
}
}
return adjacent;
}
/**
Toggle sides between lineto and curve to if both corners selected.
Input is a list of selected corner draggable indices.
*/
uint SPMeshNodeArray::side_toggle( std::vector<uint> corners ) {
uint toggled = 0;
if( corners.size() < 2 ) return 0;
for( uint i = 0; i < corners.size()-1; ++i ) {
for( uint j = i+1; j < corners.size(); ++j ) {
SPMeshNode* n[4];
if( adjacent_corners( corners[i], corners[j], n ) ) {
gchar path_type = n[1]->path_type;
switch (path_type)
{
case 'L':
n[1]->path_type = 'C';
n[2]->path_type = 'C';
n[1]->set = true;
n[2]->set = true;
break;
case 'l':
n[1]->path_type = 'c';
n[2]->path_type = 'c';
n[1]->set = true;
n[2]->set = true;
break;
case 'C': {
n[1]->path_type = 'L';
n[2]->path_type = 'L';
n[1]->set = false;
n[2]->set = false;
// 'L' acts as if handles are 1/3 of path length from corners.
Geom::Point dp = (n[3]->p - n[0]->p)/3.0;
n[1]->p = n[0]->p + dp;
n[2]->p = n[3]->p - dp;
break;
}
case 'c': {
n[1]->path_type = 'l';
n[2]->path_type = 'l';
n[1]->set = false;
n[2]->set = false;
// 'l' acts as if handles are 1/3 of path length from corners.
Geom::Point dp = (n[3]->p - n[0]->p)/3.0;
n[1]->p = n[0]->p + dp;
n[2]->p = n[3]->p - dp;
// std::cout << "Toggle sides: "
// << n[0]->p << " "
// << n[1]->p << " "
// << n[2]->p << " "
// << n[3]->p << " "
// << dp << std::endl;
break;
}
default:
std::cout << "Toggle sides: Invalid path type: " << path_type << std::endl;
}
++toggled;
}
}
}
if( toggled > 0 ) built = false;
return toggled;
}
/**
* Converts generic Beziers to Beziers approximating elliptical arcs, preserving handle direction.
* There are infinite possible solutions. The solution chosen here is to generate a section of an
* ellipse that is centered on the intersection of the two lines passing through the two nodes but
* parallel to the other node's handle direction. This is the section of an ellipse that
* corresponds to a quarter of a circle squished and then skewed.
*/
uint SPMeshNodeArray::side_arc( std::vector<uint> corners ) {
if( corners.size() < 2 ) return 0;
uint arced = 0;
for( uint i = 0; i < corners.size()-1; ++i ) {
for( uint j = i+1; j < corners.size(); ++j ) {
SPMeshNode* n[4];
if( adjacent_corners( corners[i], corners[j], n ) ) {
gchar path_type = n[1]->path_type;
switch (path_type)
{
case 'L':
case 'l':
std::cout << "SPMeshNodeArray::arc_sides: Can't convert straight lines to arcs.";
break;
case 'C':
case 'c': {
Geom::Ray ray1( n[0]->p, n[1]->p );
Geom::Ray ray2( n[3]->p, n[2]->p );
if( !are_parallel( (Geom::Line)ray1, (Geom::Line)ray2 ) ) {
Geom::OptCrossing crossing = intersection( ray1, ray2 );
if( crossing ) {
Geom::Point intersection = ray1.pointAt( (*crossing).ta );
const double f = 4.0/3.0 * tan( M_PI/2.0/4.0 );
Geom::Point h1 = intersection - n[0]->p;
Geom::Point h2 = intersection - n[3]->p;
n[1]->p = n[0]->p + f*h1;
n[2]->p = n[3]->p + f*h2;
++arced;
} else {
std::cout << "SPMeshNodeArray::arc_sides: No crossing, can't turn into arc." << std::endl;
}
} else {
std::cout << "SPMeshNodeArray::arc_sides: Handles parallel, can't turn into arc." << std::endl;
}
break;
}
default:
std::cout << "SPMeshNodeArray::arc_sides: Invalid path type: " << n[1]->path_type << std::endl;
}
}
}
}
if( arced > 0 ) built = false;
return arced;
}
/**
Toggle sides between lineto and curve to if both corners selected.
Input is a list of selected corner draggable indices.
*/
uint SPMeshNodeArray::tensor_toggle( std::vector<uint> corners ) {
// std::cout << "SPMeshNodeArray::tensor_toggle" << std::endl;
if( corners.size() < 4 ) return 0;
uint toggled = 0;
// Number of corners in a row of patches.
uint ncorners = patch_columns() + 1;
for( uint i = 0; i < corners.size()-3; ++i ) {
for( uint j = i+1; j < corners.size()-2; ++j ) {
for( uint k = j+1; k < corners.size()-1; ++k ) {
for( uint l = k+1; l < corners.size(); ++l ) {
uint c[4];
c[0] = corners[i];
c[1] = corners[j];
c[2] = corners[k];
c[3] = corners[l];
std::sort( c, c+4 );
// Check we have four corners of one patch selected
if( c[1]-c[0] == 1 &&
c[3]-c[2] == 1 &&
c[2]-c[0] == ncorners &&
c[3]-c[1] == ncorners &&
c[0] % ncorners < ncorners - 1 ) {
// Patch
uint prow = c[0] / ncorners;
uint pcol = c[0] % ncorners;
// Upper left node of patch
uint irow = prow * 3;
uint jcol = pcol * 3;
// std::cout << "tensor::toggle: "
// << c[0] << ", "
// << c[1] << ", "
// << c[2] << ", "
// << c[3] << std::endl;
// std::cout << "tensor::toggle: "
// << " irow: " << irow
// << " jcol: " << jcol
// << " prow: " << prow
// << " pcol: " << pcol
// << std::endl;
SPMeshPatchI patch( &nodes, prow, pcol );
patch.updateNodes();
if( patch.tensorIsSet() ) {
// Unset tensor points
nodes[irow+1][jcol+1]->set = false;
nodes[irow+1][jcol+2]->set = false;
nodes[irow+2][jcol+1]->set = false;
nodes[irow+2][jcol+2]->set = false;
} else {
// Set tensor points
nodes[irow+1][jcol+1]->set = true;
nodes[irow+1][jcol+2]->set = true;
nodes[irow+2][jcol+1]->set = true;
nodes[irow+2][jcol+2]->set = true;
}
++toggled;
}
}
}
}
}
if( toggled > 0 ) built = false;
return toggled;
}
/**
Atempts to smooth color transitions across corners.
Input is a list of selected corner draggable indices.
*/
uint SPMeshNodeArray::color_smooth( std::vector<uint> corners ) {
// std::cout << "SPMeshNodeArray::color_smooth" << std::endl;
uint smoothed = 0;
// Number of corners in a row of patches.
uint ncorners = patch_columns() + 1;
// Number of node rows and columns
uint ncols = patch_columns() * 3 + 1;
uint nrows = patch_rows() * 3 + 1;
for( uint i = 0; i < corners.size(); ++i ) {
uint corner = corners[i];
// std::cout << "SPMeshNodeArray::color_smooth: " << i << " " << corner << std::endl;
// Node row & col
uint nrow = (corner / ncorners) * 3;
uint ncol = (corner % ncorners) * 3;
SPMeshNode* n[7];
for( uint s = 0; s < 2; ++s ) {
bool smooth = false;
// Find neighboring nodes
if( s == 0 ) {
// Horizontal
if( ncol > 2 && ncol+3 < ncols) {
for( uint j = 0; j < 7; ++j ) {
n[j] = nodes[ nrow ][ ncol - 3 + j ];
}
smooth = true;
}
} else {
// Vertical
if( nrow > 2 && nrow+3 < nrows) {
for( uint j = 0; j < 7; ++j ) {
n[j] = nodes[ nrow - 3 + j ][ ncol ];
}
smooth = true;
}
}
if( smooth ) {
// Let the smoothing begin
// std::cout << " checking: " << ncol << " " << nrow << std::endl;
// Get initial slopes using closest handles.
double slope[2][3];
double slope_ave[3];
double slope_diff[3];
// Color of corners
SPColor color0 = n[0]->color;
SPColor color3 = n[3]->color;
SPColor color6 = n[6]->color;
// Distance nodes from selected corner
Geom::Point d[7];
for( uint k = 0; k < 7; ++k ) {
d[k]= n[k]->p - n[3]->p;
// std::cout << " d[" << k << "]: " << d[k].length() << std::endl;
}
double sdm = -1.0; // Slope Diff Max
uint cdm = 0; // Color Diff Max (Which color has the maximum difference in slopes)
for( uint c = 0; c < 3; ++c ) {
if( d[2].length() != 0.0 ) {
slope[0][c] = (color3.v.c[c] - color0.v.c[c]) / d[2].length();
}
if( d[4].length() != 0.0 ) {
slope[1][c] = (color6.v.c[c] - color3.v.c[c]) / d[4].length();
}
slope_ave[c] = (slope[0][c]+slope[1][c]) / 2.0;
slope_diff[c] = (slope[0][c]-slope[1][c]);
// std::cout << " color: " << c << " :"
// << color0.v.c[c] << " "
// << color3.v.c[c] << " "
// << color6.v.c[c]
// << " slope: "
// << slope[0][c] << " "
// << slope[1][c]
// << " slope_ave: " << slope_ave[c]
// << " slope_diff: " << slope_diff[c]
// << std::endl;
// Find color with maximum difference
if( std::abs( slope_diff[c] ) > sdm ) {
sdm = std::abs( slope_diff[c] );
cdm = c;
}
}
// std::cout << " cdm: " << cdm << std::endl;
// Find new handle positions:
double length_left = d[0].length();
double length_right = d[6].length();
if( slope_ave[ cdm ] != 0.0 ) {
length_left = std::abs( (color3.v.c[cdm] - color0.v.c[cdm]) / slope_ave[ cdm ] );
length_right = std::abs( (color6.v.c[cdm] - color3.v.c[cdm]) / slope_ave[ cdm ] );
}
// Move closest handle a maximum of mid point... but don't shorten
double max = 0.8;
if( length_left > max * d[0].length() && length_left > d[2].length() ) {
std::cout << " Can't smooth left side" << std::endl;
length_left = std::max( max * d[0].length(), d[2].length() );
}
if( length_right > max * d[6].length() && length_right > d[4].length() ) {
std::cout << " Can't smooth right side" << std::endl;
length_right = std::max( max * d[6].length(), d[4].length() );
}
if( d[2].length() != 0.0 ) d[2] *= length_left/d[2].length();
if( d[4].length() != 0.0 ) d[4] *= length_right/d[4].length();
// std::cout << " length_left: " << length_left
// << " d[0]: " << d[0].length()
// << " length_right: " << length_right
// << " d[6]: " << d[6].length()
// << std::endl;
n[2]->p = n[3]->p + d[2];
n[4]->p = n[3]->p + d[4];
++smoothed;
}
}
}
if( smoothed > 0 ) built = false;
return smoothed;
}
/**
Pick color from background for selected corners.
*/
uint SPMeshNodeArray::color_pick( std::vector<uint> icorners, SPItem* item ) {
// std::cout << "SPMeshNodeArray::color_pick" << std::endl;
uint picked = 0;
// Code inspired from clone tracing
// Setup...
// We need a copy of the drawing so we can hide the mesh.
Inkscape::Drawing *pick_drawing = new Inkscape::Drawing();
unsigned pick_visionkey = SPItem::display_key_new(1);
SPDocument *pick_doc = mg->document;
pick_drawing->setRoot(pick_doc->getRoot()->invoke_show(*pick_drawing, pick_visionkey, SP_ITEM_SHOW_DISPLAY));
item->invoke_hide(pick_visionkey);
pick_doc->getRoot()->requestDisplayUpdate(SP_OBJECT_MODIFIED_FLAG);
pick_doc->ensureUpToDate();
//gdouble pick_zoom = 1.0; // zoom;
//pick_drawing->root()->setTransform(Geom::Scale(pick_zoom));
pick_drawing->update();
// std::cout << " transform: " << std::endl;
// std::cout << item->transform << std::endl;
// std::cout << " i2doc: " << std::endl;
// std::cout << item->i2doc_affine() << std::endl;
// std::cout << " i2dt: " << std::endl;
// std::cout << item->i2dt_affine() << std::endl;
// std::cout << " dt2i: " << std::endl;
// std::cout << item->dt2i_affine() << std::endl;
SPGradient* gr = SP_GRADIENT( mg );
// if( gr->gradientTransform_set ) {
// std::cout << " gradient transform set: " << std::endl;
// std::cout << gr->gradientTransform << std::endl;
// } else {
// std::cout << " gradient transform not set! " << std::endl;
// }
// Do picking
for( uint i = 0; i < icorners.size(); ++i ) {
uint corner = icorners[i];
SPMeshNode* n = corners[ corner ];
// Region to average over
Geom::Point p = n->p;
// std::cout << " p: " << p << std::endl;
p *= gr->gradientTransform;
// std::cout << " p: " << p << std::endl;
// If on edge, move inward
uint cols = patch_columns()+1;
uint rows = patch_rows()+1;
uint col = corner % cols;
uint row = corner / cols;
uint ncol = col * 3;
uint nrow = row * 3;
double size = 3.0;
// Top edge
if( row == 0 ) {
Geom::Point dp = nodes[nrow+1][ncol]->p - p;
p += unit_vector( dp ) * size;
}
// Right edge
if( col == cols-1 ) {
Geom::Point dp = nodes[nrow][ncol-1]->p - p;
p += unit_vector( dp ) * size;
}
// Bottom edge
if( row == rows-1 ) {
Geom::Point dp = nodes[nrow-1][ncol]->p - p;
p += unit_vector( dp ) * size;
}
// Left edge
if( col == 0 ) {
Geom::Point dp = nodes[nrow][ncol+1]->p - p;
p += unit_vector( dp ) * size;
}
Geom::Rect box( p[Geom::X]-size/2.0, p[Geom::Y]-size/2.0,
p[Geom::X]+size/2.0, p[Geom::Y]+size/2.0 );
/* Item integer bbox in points */
Geom::IntRect ibox = box.roundOutwards();
/* Find visible area */
cairo_surface_t *s = cairo_image_surface_create(CAIRO_FORMAT_ARGB32, ibox.width(), ibox.height());
Inkscape::DrawingContext ct(s, ibox.min());
/* Render copy and pick color */
pick_drawing->render(ct, ibox);
double R = 0, G = 0, B = 0, A = 0;
ink_cairo_surface_average_color(s, R, G, B, A);
cairo_surface_destroy(s);
// std::cout << " p: " << p
// << " box: " << ibox
// << " R: " << R
// << " G: " << G
// << " B: " << B
// << std::endl;
n->color.set( R, G, B );
}
pick_doc->getRoot()->invoke_hide(pick_visionkey);
delete pick_drawing;
if( picked > 0 ) built = false;
return picked;
}
/**
Moves handles in response to a corner node move.
p_old: orignal position of moved corner node.
corner: the corner node moved (draggable index, i.e. point_i).
selected: list of all corners selected (draggable indices).
op: how other corners should be moved.
*/
void SPMeshNodeArray::update_handles( uint corner, std::vector< uint > selected, Geom::Point p_old, MeshNodeOperation op ) {
assert( drag_valid );
// std::cout << "SPMeshNodeArray::update_handles: "
// << " corner: " << corner
// << " op: " << op
// << std::endl;
// Find number of patch rows and columns
uint mrow = patch_rows();
uint mcol = patch_columns();
// Number of corners in a row of patches.
uint ncorners = mcol + 1;
// Find corner row/column
uint crow = corner / ncorners;
uint ccol = corner % ncorners;
// Find node row/column
uint nrow = crow * 3;
uint ncol = ccol * 3;
// std::cout << " mrow: " << mrow
// << " mcol: " << mcol
// << " crow: " << crow
// << " ccol: " << ccol
// << " ncorners: " << ncorners
// << " nrow: " << nrow
// << " ncol: " << ncol
// << std::endl;
// New corner mesh coordinate.
Geom::Point p_new = nodes[nrow][ncol]->p;
// Corner point move dpg in mesh coordinate system.
Geom::Point dp = p_new - p_old;
// std::cout << " p_old: " << p_old << std::endl;
// std::cout << " p_new: " << p_new << std::endl;
// std::cout << " dp: " << dp << std::endl;
// STEP 1: ONLY DO DIRECT MOVE
bool patch[4];
patch[0] = patch[1] = patch[2] = patch[3] = false;
if( ccol > 0 && crow > 0 ) patch[0] = true;
if( ccol < mcol && crow > 0 ) patch[1] = true;
if( ccol < mcol && crow < mrow ) patch[2] = true;
if( ccol > 0 && crow < mrow ) patch[3] = true;
// std::cout << patch[0] << " "
// << patch[1] << " "
// << patch[2] << " "
// << patch[3] << std::endl;
// Move handles
if( patch[0] || patch[1] ) {
if( nodes[nrow-1][ncol]->path_type == 'l' ||
nodes[nrow-1][ncol]->path_type == 'L' ) {
Geom::Point s = (nodes[nrow-3][ncol]->p - nodes[nrow][ncol]->p)/3.0;
nodes[nrow-1][ncol ]->p = nodes[nrow][ncol]->p + s;
nodes[nrow-2][ncol ]->p = nodes[nrow-3][ncol]->p - s;
} else {
nodes[nrow-1][ncol ]->p += dp;
}
}
if( patch[1] || patch[2] ) {
if( nodes[nrow ][ncol+1]->path_type == 'l' ||
nodes[nrow ][ncol+1]->path_type == 'L' ) {
Geom::Point s = (nodes[nrow][ncol+3]->p - nodes[nrow][ncol]->p)/3.0;
nodes[nrow ][ncol+1]->p = nodes[nrow][ncol]->p + s;
nodes[nrow ][ncol+2]->p = nodes[nrow][ncol+3]->p - s;
} else {
nodes[nrow ][ncol+1]->p += dp;
}
}
if( patch[2] || patch[3] ) {
if( nodes[nrow+1][ncol ]->path_type == 'l' ||
nodes[nrow+1][ncol ]->path_type == 'L' ) {
Geom::Point s = (nodes[nrow+3][ncol]->p - nodes[nrow][ncol]->p)/3.0;
nodes[nrow+1][ncol ]->p = nodes[nrow][ncol]->p + s;
nodes[nrow+2][ncol ]->p = nodes[nrow+3][ncol]->p - s;
} else {
nodes[nrow+1][ncol ]->p += dp;
}
}
if( patch[3] || patch[0] ) {
if( nodes[nrow ][ncol-1]->path_type == 'l' ||
nodes[nrow ][ncol-1]->path_type == 'L' ) {
Geom::Point s = (nodes[nrow][ncol-3]->p - nodes[nrow][ncol]->p)/3.0;
nodes[nrow ][ncol-1]->p = nodes[nrow][ncol]->p + s;
nodes[nrow ][ncol-2]->p = nodes[nrow][ncol-3]->p - s;
} else {
nodes[nrow ][ncol-1]->p += dp;
}
}
// Move tensors
if( patch[0] ) nodes[nrow-1][ncol-1]->p += dp;
if( patch[1] ) nodes[nrow-1][ncol+1]->p += dp;
if( patch[2] ) nodes[nrow+1][ncol+1]->p += dp;
if( patch[3] ) nodes[nrow+1][ncol-1]->p += dp;
// // Check if neighboring corners are selected.
// bool do_scale = false;
// bool do_scale_xp = do_scale;
// bool do_scale_xn = do_scale;
// bool do_scale_yp = do_scale;
// bool do_scale_yn = do_scale;
// if( ccol < mcol+1 ) {
// if( std::find( sc.begin(), sc.end(), point_i + 1 ) != sc.end() ) {
// do_scale_xp = false;
// std::cout << " Not scaling x+" << std::endl;
// }
// }
// if( ccol > 0 ) {
// if( std::find( sc.begin(), sc.end(), point_i - 1 ) != sc.end() ) {
// do_scale_xn = false;
// std::cout << " Not scaling x-" << std::endl;
// }
// }
// if( crow < mrow+1 ) {
// if( std::find( sc.begin(), sc.end(), point_i + ncorners ) != sc.end() ) {
// do_scale_yp = false;
// std::cout << " Not scaling y+" << std::endl;
// }
// }
// if( crow > 0 ) {
// if( std::find( sc.begin(), sc.end(), point_i - ncorners ) != sc.end() ) {
// do_scale_yn = false;
// std::cout << " Not scaling y-" << std::endl;
// }
// }
// // We have four patches to adjust...
// for ( uint k = 0; k < 4; ++k ) {
// bool do_scale_x = do_scale;
// bool do_scale_y = do_scale;
// SPMeshNode* pnodes[4][4];
// // Load up matrix
// switch (k) {
// case 0:
// if( crow < mrow+1 && ccol < mcol+1 ) {
// // Bottom right patch
// do_scale_x = do_scale_xp;
// do_scale_y = do_scale_yp;
// for( uint i = 0; i < 4; ++i ) {
// for( uint j = 0; j< 4; ++j ) {
// pnodes[i][j] = mg->array.nodes[nrow+i][nrow+j];
// }
// }
// }
// break;
// case 1:
// if( crow < mrow+1 && ccol > 0 ) {
// // Bottom left patch (note x, y swapped)
// do_scale_y = do_scale_xn;
// do_scale_x = do_scale_yp;
// for( uint i = 0; i < 4; ++i ) {
// for( uint j = 0; j< 4; ++j ) {
// pnodes[j][i] = mg->array.nodes[nrow+i][nrow-j];
// }
// }
// }
// break;
// case 2:
// if( crow > 0 && ccol > 0 ) {
// // Top left patch
// do_scale_x = do_scale_xn;
// do_scale_y = do_scale_yn;
// for( uint i = 0; i < 4; ++i ) {
// for( uint j = 0; j< 4; ++j ) {
// pnodes[i][j] = mg->array.nodes[nrow-i][nrow-j];
// }
// }
// }
// break;
// case 3:
// if( crow > 0 && ccol < mcol+1 ) {
// // Top right patch (note x, y swapped)
// do_scale_y = do_scale_xp;
// do_scale_x = do_scale_yn;
// for( uint i = 0; i < 4; ++i ) {
// for( uint j = 0; j< 4; ++j ) {
// pnodes[j][i] = mg->array.nodes[nrow-i][nrow+j];
// }
// }
// }
// break;
// }
// // Now we must move points in both x and y.
// // There are upto six points to move: P01, P02, P11, P12, P21, P22.
// // (The points P10, P20 will be moved in another branch of the loop.
// // The points P03, P13, P23, P33, P32, P31, P30 are not moved.)
// //
// // P00 P01 P02 P03
// // P10 P11 P12 P13
// // P20 P21 P22 P23
// // P30 P31 P32 P33
// //
// // The goal is to preserve the direction of the handle!
// Geom::Point dsx_new = pnodes[0][3]->p - pnodes[0][0]->p; // New side x
// Geom::Point dsy_new = pnodes[3][0]->p - pnodes[0][0]->p; // New side y
// Geom::Point dsx_old = pnodes[0][3]->p - pcg_old; // Old side x
// Geom::Point dsy_old = pnodes[3][0]->p - pcg_old; // Old side y
// double scale_factor_x = 1.0;
// if( dsx_old.length() != 0.0 ) scale_factor_x = dsx_new.length()/dsx_old.length();
// double scale_factor_y = 1.0;
// if( dsy_old.length() != 0.0 ) scale_factor_y = dsy_new.length()/dsy_old.length();
// if( do_scalex && do_scaley ) {
// // We have six point to move.
// // P01
// Geom::Point dp01 = pnodes[0][1] - pcg_old;
// dp01 *= scale_factor_x;
// pnodes[0][1] = pnodes[0][0] + dp01;
// // P02
// Geom::Point dp02 = pnodes[0][2] - pnodes[0][3];
// dp02 *= scale_factor_x;
// pnodes[0][2] = pnodes[0][3] + dp02;
// // P11
// Geom::Point dp11 = pnodes[1][1] - pcg_old;
// dp11 *= scale_factor_x;
// pnodes[1][1] = pnodes[0][0] + dp11;
// // P21
// Geom::Point dp21 = pnodes[2][1] - pnodes[3][0];
// dp21 *= scale_factor_x;
// dp21 *= scale_factor_y;
// pnodes[2][1] = pnodes[3][0] + dp21;
// Geom::Point dsx1 = pnodes[0][1]->p -
}
// Defined in gradient-chemistry.cpp
guint32 average_color(guint32 c1, guint32 c2, gdouble p);
/**
Split a row into n equal parts.
*/
void SPMeshNodeArray::split_row( uint row, uint n ) {
double nn = n;
if( n > 1 ) split_row( row, (nn-1)/nn );
if( n > 2 ) split_row( row, n-1 );
}
/**
Split a column into n equal parts.
*/
void SPMeshNodeArray::split_column( uint col, uint n ) {
double nn = n;
if( n > 1 ) split_column( col, (nn-1)/nn );
if( n > 2 ) split_column( col, n-1 );
}
/**
Split a row into two rows at coord (fraction of row height).
*/
void SPMeshNodeArray::split_row( uint row, double coord ) {
// std::cout << "Splitting row: " << row << " at " << coord << std::endl;
// print();
assert( coord >= 0.0 && coord <= 1.0 );
assert( row < patch_rows() );
built = false;
// First step is to ensure that handle and tensor points are up-to-date if they are not set.
// (We can't do this on the fly as we overwrite the necessary points to do the calculation
// during the update.)
for( uint j = 0; j < patch_columns(); ++ j ) {
SPMeshPatchI patch( &nodes, row, j );
patch.updateNodes();
}
// Add three new rows of empty nodes
for( uint i = 0; i < 3; ++i ) {
std::vector< SPMeshNode* > new_row;
for( uint j = 0; j < nodes[0].size(); ++j ) {
SPMeshNode* new_node = new SPMeshNode;
new_row.push_back( new_node );
}
nodes.insert( nodes.begin()+3*(row+1), new_row );
}
uint i = 3 * row; // Convert from patch row to node row
for( uint j = 0; j < nodes[i].size(); ++j ) {
// std::cout << "Splitting row: column: " << j << std::endl;
Geom::Point p[4];
for( uint k = 0; k < 4; ++k ) {
uint n = k;
if( k == 3 ) n = 6; // Bottom patch row has been shifted by new rows
p[k] = nodes[i+n][j]->p;
// std::cout << p[k] << std::endl;
}
Geom::BezierCurveN<3> b( p[0], p[1], p[2], p[3] );
std::pair<Geom::BezierCurveN<3>, Geom::BezierCurveN<3> > b_new =
b.subdivide( coord );
// Update points
for( uint n = 0; n < 4; ++n ) {
nodes[i+n ][j]->p = b_new.first[n];
nodes[i+n+3][j]->p = b_new.second[n];
// std::cout << b_new.first[n] << " " << b_new.second[n] << std::endl;
}
if( nodes[i][j]->node_type == MG_NODE_TYPE_CORNER ) {
// We are splitting a side
// Path type stored in handles.
gchar path_type = nodes[i+1][j]->path_type;
nodes[i+4][j]->path_type = path_type;
nodes[i+5][j]->path_type = path_type;
bool set = nodes[i+1][j]->set;
nodes[i+4][j]->set = set;
nodes[i+5][j]->set = set;
nodes[i+4][j]->node_type = MG_NODE_TYPE_HANDLE;
nodes[i+5][j]->node_type = MG_NODE_TYPE_HANDLE;
// Color stored in corners
guint c0 = nodes[i ][j]->color.toRGBA32( 1.0 );
guint c1 = nodes[i+6][j]->color.toRGBA32( 1.0 );
gdouble o0 = nodes[i ][j]->opacity;
gdouble o1 = nodes[i+6][j]->opacity;
guint cnew = average_color( c0, c1, coord );
gdouble onew = o0 * (1.0 - coord) + o1 * coord;
nodes[i+3][j]->color.set( cnew );
nodes[i+3][j]->opacity = onew;
nodes[i+3][j]->node_type = MG_NODE_TYPE_CORNER;
nodes[i+3][j]->set = true;
} else {
// We are splitting a middle
bool set = nodes[i+1][j]->set || nodes[i+1][j]->set;
nodes[i+4][j]->set = set;
nodes[i+5][j]->set = set;
nodes[i+4][j]->node_type = MG_NODE_TYPE_TENSOR;
nodes[i+5][j]->node_type = MG_NODE_TYPE_TENSOR;
// Path type, if different, choose l -> L -> c -> C.
gchar path_type0 = nodes[i ][j]->path_type;
gchar path_type1 = nodes[i+6][j]->path_type;
gchar path_type = 'l';
if( path_type0 == 'L' || path_type1 == 'L') path_type = 'L';
if( path_type0 == 'c' || path_type1 == 'c') path_type = 'c';
if( path_type0 == 'C' || path_type1 == 'C') path_type = 'C';
nodes[i+3][j]->path_type = path_type;
nodes[i+3][j]->node_type = MG_NODE_TYPE_HANDLE;
if( path_type == 'c' || path_type == 'C' ) nodes[i+3][j]->set = true;
}
nodes[i+3][j]->node_edge = MG_NODE_EDGE_NONE;
nodes[i+4][j]->node_edge = MG_NODE_EDGE_NONE;
nodes[i+5][j]->node_edge = MG_NODE_EDGE_NONE;;
if( j == 0 ) {
nodes[i+3][j]->node_edge |= MG_NODE_EDGE_LEFT;
nodes[i+4][j]->node_edge |= MG_NODE_EDGE_LEFT;
nodes[i+5][j]->node_edge |= MG_NODE_EDGE_LEFT;
}
if( j == nodes[i].size() - 1 ) {
nodes[i+3][j]->node_edge |= MG_NODE_EDGE_RIGHT;
nodes[i+4][j]->node_edge |= MG_NODE_EDGE_RIGHT;
nodes[i+5][j]->node_edge |= MG_NODE_EDGE_RIGHT;
}
}
// std::cout << "Splitting row: result:" << std::endl;
// print();
}
/**
Split a column into two columns at coord (fraction of column width).
*/
void SPMeshNodeArray::split_column( uint col, double coord ) {
// std::cout << "Splitting column: " << col << " at " << coord << std::endl;
// print();
assert( coord >= 0.0 && coord <= 1.0 );
assert( col < patch_columns() );
built = false;
// First step is to ensure that handle and tensor points are up-to-date if they are not set.
// (We can't do this on the fly as we overwrite the necessary points to do the calculation
// during the update.)
for( uint i = 0; i < patch_rows(); ++ i ) {
SPMeshPatchI patch( &nodes, i, col );
patch.updateNodes();
}
uint j = 3 * col; // Convert from patch column to node column
for( uint i = 0; i < nodes.size(); ++i ) {
// std::cout << "Splitting column: row: " << i << std::endl;
Geom::Point p[4];
for( uint k = 0; k < 4; ++k ) {
p[k] = nodes[i][j+k]->p;
}
Geom::BezierCurveN<3> b( p[0], p[1], p[2], p[3] );
std::pair<Geom::BezierCurveN<3>, Geom::BezierCurveN<3> > b_new =
b.subdivide( coord );
// Add three new nodes
for( uint n = 0; n < 3; ++n ) {
SPMeshNode* new_node = new SPMeshNode;
nodes[i].insert( nodes[i].begin()+j+3, new_node );
}
// Update points
for( uint n = 0; n < 4; ++n ) {
nodes[i][j+n]->p = b_new.first[n];
nodes[i][j+n+3]->p = b_new.second[n];
}
if( nodes[i][j]->node_type == MG_NODE_TYPE_CORNER ) {
// We are splitting a side
// Path type stored in handles.
gchar path_type = nodes[i][j+1]->path_type;
nodes[i][j+4]->path_type = path_type;
nodes[i][j+5]->path_type = path_type;
bool set = nodes[i][j+1]->set;
nodes[i][j+4]->set = set;
nodes[i][j+5]->set = set;
nodes[i][j+4]->node_type = MG_NODE_TYPE_HANDLE;
nodes[i][j+5]->node_type = MG_NODE_TYPE_HANDLE;
// Color stored in corners
guint c0 = nodes[i][j ]->color.toRGBA32( 1.0 );
guint c1 = nodes[i][j+6]->color.toRGBA32( 1.0 );
gdouble o0 = nodes[i][j ]->opacity;
gdouble o1 = nodes[i][j+6]->opacity;
guint cnew = average_color( c0, c1, coord );
gdouble onew = o0 * (1.0 - coord) + o1 * coord;
nodes[i][j+3]->color.set( cnew );
nodes[i][j+3]->opacity = onew;
nodes[i][j+3]->node_type = MG_NODE_TYPE_CORNER;
nodes[i][j+3]->set = true;
} else {
// We are splitting a middle
bool set = nodes[i][j+1]->set || nodes[i][j+2]->set;
nodes[i][j+4]->set = set;
nodes[i][j+5]->set = set;
nodes[i][j+4]->node_type = MG_NODE_TYPE_TENSOR;
nodes[i][j+5]->node_type = MG_NODE_TYPE_TENSOR;
// Path type, if different, choose l -> L -> c -> C.
gchar path_type0 = nodes[i][j ]->path_type;
gchar path_type1 = nodes[i][j+6]->path_type;
gchar path_type = 'l';
if( path_type0 == 'L' || path_type1 == 'L') path_type = 'L';
if( path_type0 == 'c' || path_type1 == 'c') path_type = 'c';
if( path_type0 == 'C' || path_type1 == 'C') path_type = 'C';
nodes[i][j+3]->path_type = path_type;
nodes[i][j+3]->node_type = MG_NODE_TYPE_HANDLE;
if( path_type == 'c' || path_type == 'C' ) nodes[i][j+3]->set = true;
}
nodes[i][j+3]->node_edge = MG_NODE_EDGE_NONE;
nodes[i][j+4]->node_edge = MG_NODE_EDGE_NONE;
nodes[i][j+5]->node_edge = MG_NODE_EDGE_NONE;;
if( i == 0 ) {
nodes[i][j+3]->node_edge |= MG_NODE_EDGE_TOP;
nodes[i][j+4]->node_edge |= MG_NODE_EDGE_TOP;
nodes[i][j+5]->node_edge |= MG_NODE_EDGE_TOP;
}
if( i == nodes.size() - 1 ) {
nodes[i][j+3]->node_edge |= MG_NODE_EDGE_BOTTOM;
nodes[i][j+4]->node_edge |= MG_NODE_EDGE_BOTTOM;
nodes[i][j+5]->node_edge |= MG_NODE_EDGE_BOTTOM;
}
}
// std::cout << "Splitting col: result:" << std::endl;
// print();
}
/*
Local Variables:
mode:c++
c-file-style:"stroustrup"
c-file-offsets:((innamespace . 0)(inline-open . 0)(case-label . +))
indent-tabs-mode:nil
fill-column:99
End:
*/
// vim: filetype=cpp:expandtab:shiftwidth=4:tabstop=8:softtabstop=4:fileencoding=utf-8:textwidth=99 :