<?xml version="1.0" encoding="UTF-8"?>

<inkscape-extension xmlns="http://www.inkscape.org/namespace/inkscape/extension">

<_name>Plot</_name>

<id>org.ekips.filter.plot</id>

<dependency type="executable" location="extensions">plotter.py</dependency>

<dependency type="executable" location="extensions">hpgl_decoder.py</dependency>

<dependency type="executable" location="extensions">hpgl_encoder.py</dependency>

<dependency type="executable" location="extensions">inkex.py</dependency>

<_param name="introduction" type="description">Please make sure that all objects you want to plot are converted to paths. The plot will automatically be aligned to the zero point.</_param>

<param name="tab" type="notebook">

<page name="misc" _gui-text="Connection">

<param name="serialPort" type="string" _gui-text="Serial Port" _gui-description="The port of your serial connection, on Windows something like 'COM1', on Linux something like: '/dev/ttyUSB0' (Default: COM1)">COM1</param>

<param name="serialBaudRate" type="optiongroup" appearance="minimal" _gui-text="Serial Baud rate" _gui-description="The Baud rate of your serial connection (Default: 9600)">

<option value="9600">9600</option>

<option value="110">110</option>

<option value="300">300</option>

<option value="600">600</option>

<option value="1200">1200</option>

<option value="2400">2400</option>

<option value="4800">4800</option>

<option value="9600">9600</option>

<option value="14400">14400</option>

<option value="19200">19200</option>

<option value="28800">28800</option>

<option value="38400">38400</option>

<option value="56000">56000</option>

<option value="57600">57600</option>

<option value="115200">115200</option>

</param>

<param name="flowControl" type="optiongroup" appearance="minimal" _gui-text="Flow control" _gui-description="Software / Hardware flow control - Try different settings to find the one that fits your plotter (Default: Software)">

<_option value="xonxoff">Software (XON/XOFF)</_option>

<_option value="rtscts">Hardware (RTS/CTS)</_option>

<_option value="dsrdtrrtscts">Hardware (DSR/DTR + RTS/CTS)</_option>

<_option value="">None</_option>

</param>

<param name="commandLanguage" type="optiongroup" appearance="minimal" _gui-text="Command Language" _gui-description="The command language to use - Try different settings to find the one that fits your plotter (Default: HPGL)">

<option value="hpgl">HPGL</option>

<option value="dmpl">DMPL</option>

</param>

<param name="space" type="description">&#xa0;</param>

<_param name="serialHelp" type="description">This can be a physical serial connection or a USB-to-Serial bridge. Ask your plotter manufacturer for drivers if needed.</_param>

<_param name="parallelHelp" type="description">Please note that Parallel (LPT) connections are not supported.</_param>

</page>

<page name="plotter" _gui-text="Plotter Settings">

<param name="pen" type="int" min="0" max="99" _gui-text="Pen number" _gui-description="The number of the pen (tool) to use, on most plotters 1 (Standard: '1')">1</param>

<param name="resolutionX" type="float" min="1.0" max="4096.0" precision="1" _gui-text="Resolution X (dpi)" _gui-description="The amount of steps the cutter moves if it moves for 1 inch on the X axis - Try different settings to find the one that fits your plotter (Default: 1016.0)">1016.0</param>

<param name="resolutionY" type="float" min="1.0" max="4096.0" precision="1" _gui-text="Resolution Y (dpi)" _gui-description="The amount of steps the cutter moves if it moves for 1 inch on the Y axis - Try different settings to find the one that fits your plotter (Default: 1016.0)">1016.0</param>

<param name="mirrorX" type="boolean" _gui-text="Mirror X-axis" _gui-description="Check this to mirror the X axis (Default: Unchecked)">false</param>

<param name="mirrorY" type="boolean" _gui-text="Mirror Y-axis" _gui-description="Check this to mirror the Y axis - Try different settings to find the one that fits your plotter (Default: Unchecked)">false</param>

<param name="orientation" type="optiongroup" appearance="minimal" _gui-text="Rotation (Clockwise)" _gui-description="Rotation of the plot - Try different settings to find the one that fits your plotter (Default: 0°)">

<option value="0">0°</option>

<option value="90">90°</option>

<option value="180">180°</option>

<option value="270">270°</option>

</param>

<param name="center" type="boolean" _gui-text="Center zero point" _gui-description="Check this if your plotter uses a centered zero point - Try different settings to find the one that fits your plotter (Default: Unchecked)">false</param>

</page>

<page name="overcutToolOffset" _gui-text="Overcut &#x26; Tool Offset">

<param name="useOvercut" type="boolean" _gui-text="Use overcut" _gui-description="Check this to use the overcut, if not checked the 'Overcut' parameter is unused (Default: Checked)">true</param>

<param name="overcut" type="float" min="0.0" max="100.0" precision="2" _gui-text="Overcut (mm)" _gui-description="The distance in mm that will be cut over the starting point of the path to prevent open paths (Default: 1.00)">1.00</param>

<param name="space" type="description">&#xa0;</param>

<param name="useToolOffset" type="boolean" _gui-text="Use tool offset correction" _gui-description="Check this to use the tool offset correction, if not checked the 'Tool offset' and 'Precut' parameters are unused (Default: Checked)">true</param>

<param name="toolOffset" type="float" min="0.0" max="20.0" precision="2" _gui-text="Tool offset (mm)" _gui-description="The offset from the tool tip to the tool axis in mm (Default: 0.25)">0.25</param>

<param name="precut" type="boolean" _gui-text="Use precut" _gui-description="Check this to cut a small line before the real drawing to align the tool orientation for the first cut (Default: Checked)">true</param>

<param name="space" type="description">&#xa0;</param>

<_param name="offsetNote" type="description">Please note that using the tool offset correction will move your plot away from the zero point by the length in mm specified by the tool offset.</_param>

</page>

<page name="misc" _gui-text="Miscellaneous">

<param name="flat" type="float" min="0.1" max="10.0" precision="1" _gui-text="Curve flatness" _gui-description="Curves are divided into lines, this number controls how fine the curves will be reproduced, the smaller the finer (Default: '1.2')">1.2</param>

<param name="offsetX" type="float" min="-10000.0" max="10000.0" precision="2" _gui-text="X offset (mm)" _gui-description="The offset to move your plot away from the zero point in mm (Default: '0.00')">0.00</param>

<param name="offsetY" type="float" min="-10000.0" max="10000.0" precision="2" _gui-text="Y offset (mm)" _gui-description="The offset to move your plot away from the zero point in mm (Default: '0.00')">0.00</param>

</page>

</param>

<effect needs-live-preview="false">

<object-type>path</object-type>

<effects-menu>

<submenu _name="Plotter"/>

</effects-menu>

</effect>

<script>

<command reldir="extensions" interpreter="python">plotter.py</command>

</script>

</inkscape-extension>