import math

import string

import bezmisc

import cspsubdiv

import cubicsuperpath

import inkex

import simplestyle

import simpletransform

class hpglEncoder:

PI = math.pi

TWO_PI = PI * 2

def __init__(self, effect):

''' options:

self.doc = effect.document.getroot()

self.options = effect.options

self.divergenceX = 'False'

self.divergenceY = 'False'

self.sizeX = 'False'

self.sizeY = 'False'

self.dryRun = True

self.lastPoint = [0, 0, 0]

self.scaleX = self.options.resolutionX / effect.uuconv['in'] * effect.uuconv[effect.getDocumentUnit()] # inch to document unit

self.scaleY = self.options.resolutionY / effect.uuconv['in'] * effect.uuconv[effect.getDocumentUnit()] # inch to document unit

mmToDocUnit = effect.uuconv['mm'] / effect.uuconv[effect.getDocumentUnit()]

self.options.offsetX = self.options.offsetX * mmToDocUnit * self.scaleX # mm to dots (plotter coordinate system)

self.options.offsetY = self.options.offsetY * mmToDocUnit * self.scaleY # mm to dots

scaleXY = (self.scaleX + self.scaleY) / 2

self.options.overcut = self.options.overcut * mmToDocUnit * scaleXY # mm to dots

self.options.toolOffset = self.options.toolOffset * mmToDocUnit * scaleXY # mm to dots

self.options.flat = self.options.flat / (1016 / ((self.options.resolutionX + self.options.resolutionY) / 2)) # scale flatness to resolution

self.toolOffsetFlat = self.options.flat / self.options.toolOffset * 4.5 # scale flatness to offset

self.mirrorX = 1.0

if self.options.mirrorX:

self.mirrorX = -1.0

self.mirrorY = -1.0

if self.options.mirrorY:

self.mirrorY = 1.0

# process viewBox attribute to correct page scaling

viewBox = self.doc.get('viewBox')

self.viewBoxTransformX = 1

self.viewBoxTransformY = 1

if viewBox:

viewBox = string.split(viewBox, ' ')

if viewBox[2] and viewBox[3]:

self.viewBoxTransformX = effect.unittouu(self.doc.get('width')) / effect.unittouu(viewBox[2])

self.viewBoxTransformY = effect.unittouu(self.doc.get('height')) / effect.unittouu(viewBox[3])

def getHpgl(self):

# dryRun to find edges

groupmat = [[self.mirrorX * self.scaleX * self.viewBoxTransformX, 0.0, 0.0], [0.0, self.mirrorY * self.scaleY * self.viewBoxTransformY, 0.0]]

groupmat = simpletransform.composeTransform(groupmat, simpletransform.parseTransform('rotate(' + self.options.orientation + ')'))

self.vData = [['', -1.0, -1.0], ['', -1.0, -1.0], ['', -1.0, -1.0], ['', -1.0, -1.0]]

self.processGroups(self.doc, groupmat)

if self.divergenceX == 'False' or self.divergenceY == 'False' or self.sizeX == 'False' or self.sizeY == 'False':

raise Exception('NO_PATHS')

# live run

self.dryRun = False

if self.options.center:

self.divergenceX += (self.sizeX - self.divergenceX) / 2

self.divergenceY += (self.sizeY - self.divergenceY) / 2

elif self.options.useToolOffset:

self.options.offsetX += self.options.toolOffset

self.options.offsetY += self.options.toolOffset

groupmat = [[self.mirrorX * self.scaleX * self.viewBoxTransformX, 0.0, - self.divergenceX + self.options.offsetX],

[0.0, self.mirrorY * self.scaleY * self.viewBoxTransformY, - self.divergenceY + self.options.offsetY]]

groupmat = simpletransform.composeTransform(groupmat, simpletransform.parseTransform('rotate(' + self.options.orientation + ')'))

self.vData = [['', -1.0, -1.0], ['', -1.0, -1.0], ['', -1.0, -1.0], ['', -1.0, -1.0]]

# store first hpgl commands

self.hpgl = 'IN;SP%d' % self.options.pen

# add precut

if self.options.useToolOffset and self.options.precut:

self.processOffset('PU', 0, 0)

self.processOffset('PD', 0, self.options.toolOffset * 8)

# start conversion

self.processGroups(self.doc, groupmat)

# shift an empty node in in order to process last node in cache

self.processOffset('PU', 0, 0)

# add return to zero point

self.hpgl += ';PU0,0;'

return self.hpgl

def processGroups(self, doc, groupmat):

# flatten groups to avoid recursion

paths = []

for node in doc:

if (node.tag == inkex.addNS('g', 'svg') and self.isGroupVisible(node)) or node.tag == inkex.addNS('path', 'svg'):

paths.append([node.tag, node, self.mergeTransform(node, groupmat)])

doc = ''

hasGroups = True

while hasGroups:

hasGroups = False

for i, elm in enumerate(paths):

if paths[i][0] == inkex.addNS('g', 'svg') and self.isGroupVisible(paths[i][1]):

hasGroups = True

for path in paths[i][1]:

if (path.tag == inkex.addNS('g', 'svg') and self.isGroupVisible(path)) or path.tag == inkex.addNS('path', 'svg'):

paths.append([path.tag, path, self.mergeTransform(path, paths[i][2])])

paths[i][0] = ''

for node in paths:

if node[0] == inkex.addNS('path', 'svg'):

self.processPath(node[1], node[2])

def mergeTransform(self, doc, matrix):

# get and merge two matrixes into one

trans = doc.get('transform')

if trans:

return simpletransform.composeTransform(matrix, simpletransform.parseTransform(trans))

else:

return matrix

def isGroupVisible(self, group):

style = group.get('style')

if style:

style = simplestyle.parseStyle(style)

if 'display' in style and style['display'] == 'none':

return False

return True

def processPath(self, node, mat):

# process path

paths = node.get('d')

if paths:

# parse and transform path

paths = cubicsuperpath.parsePath(paths)

simpletransform.applyTransformToPath(mat, paths)

cspsubdiv.cspsubdiv(paths, self.options.flat)

# path to HPGL commands

oldPosX = 0.0

oldPosY = 0.0

# TODO: Plot smallest parts first to avid plotter dragging parts of foil around (on text)

for singlePath in paths:

cmd = 'PU'

for singlePathPoint in singlePath:

posX, posY = singlePathPoint[1]

# check if point is repeating, if so, ignore

if int(round(posX)) != int(round(oldPosX)) or int(round(posY)) != int(round(oldPosY)):

self.processOffset(cmd, posX, posY)

cmd = 'PD'

oldPosX = posX

oldPosY = posY

# perform overcut

if self.options.useOvercut and not self.dryRun:

# check if last and first points are the same, otherwise the path is not closed and no overcut can be performed

if int(round(oldPosX)) == int(round(singlePath[0][1][0])) and int(round(oldPosY)) == int(round(singlePath[0][1][1])):

overcutLength = 0

for singlePathPoint in singlePath:

posX, posY = singlePathPoint[1]

# check if point is repeating, if so, ignore

if int(round(posX)) != int(round(oldPosX)) or int(round(posY)) != int(round(oldPosY)):

overcutLength += self.getLength(oldPosX, oldPosY, posX, posY)

if overcutLength >= self.options.overcut:

newLength = self.changeLength(oldPosX, oldPosY, posX, posY, - (overcutLength - self.options.overcut))

self.processOffset(cmd, newLength[0], newLength[1])

break

else:

self.processOffset(cmd, posX, posY)

oldPosX = posX

oldPosY = posY

def getLength(self, x1, y1, x2, y2, absolute=True):

# calc absoulute or relative length between two points

length = math.sqrt((x2 - x1) ** 2.0 + (y2 - y1) ** 2.0)

if absolute:

length = math.fabs(length)

return length

def changeLength(self, x1, y1, x2, y2, offset):

# change length of line

if offset < 0:

offset = max( - self.getLength(x1, y1, x2, y2), offset)

x = x2 + (x2 - x1) / self.getLength(x1, y1, x2, y2, False) * offset

y = y2 + (y2 - y1) / self.getLength(x1, y1, x2, y2, False) * offset

return [x, y]

def getAlpha(self, x1, y1, x2, y2, x3, y3):

# get alpha of point 2

temp1 = (x1 - x2) ** 2 + (y1 - y2) ** 2 + (x3 - x2) ** 2 + (y3 - y2) ** 2 - (x1 - x3) ** 2 - (y1 - y3) ** 2

temp2 = 2 * math.sqrt((x1 - x2) ** 2 + (y1 - y2) ** 2) * math.sqrt((x3 - x2) ** 2 + (y3 - y2) ** 2)

return math.acos(max(min(temp1 / temp2, 1.0), -1.0))

def processOffset(self, cmd, posX, posY):

# calculate offset correction (or dont)

if not self.options.useToolOffset or self.dryRun:

self.storePoint(cmd, posX, posY)

else:

# insert data into cache

self.vData.pop(0)

self.vData.insert(3, [cmd, posX, posY])

# decide if enough data is availabe

if self.vData[2][1] != -1.0:

if self.vData[1][1] == -1.0:

self.storePoint(self.vData[2][0], self.vData[2][1], self.vData[2][2])

else:

# perform tool offset correction (It's a *tad* complicated, if you want to understand it draw the data as lines on paper)

if self.vData[2][0] == 'PD': # If the 3rd entry in the cache is a pen down command make the line longer by the tool offset

pointThree = self.changeLength(self.vData[1][1], self.vData[1][2], self.vData[2][1], self.vData[2][2], self.options.toolOffset)

self.storePoint('PD', pointThree[0], pointThree[1])

elif self.vData[0][1] != -1.0:

# Elif the 1st entry in the cache is filled with data and the 3rd entry is a pen up command shift

# the 3rd entry by the current tool offset position according to the 2nd command

pointThree = self.changeLength(self.vData[0][1], self.vData[0][2], self.vData[1][1], self.vData[1][2], self.options.toolOffset)

pointThree[0] = self.vData[2][1] - (self.vData[1][1] - pointThree[0])

pointThree[1] = self.vData[2][2] - (self.vData[1][2] - pointThree[1])

self.storePoint('PU', pointThree[0], pointThree[1])

else:

# Else just write the 3rd entry

pointThree = [self.vData[2][1], self.vData[2][2]]

self.storePoint('PU', pointThree[0], pointThree[1])

if self.vData[3][0] == 'PD':

# If the 4th entry in the cache is a pen down command guide tool to next line with a circle between the prolonged 3rd and 4th entry

if self.getLength(self.vData[2][1], self.vData[2][2], self.vData[3][1], self.vData[3][2]) >= self.options.toolOffset:

pointFour = self.changeLength(self.vData[3][1], self.vData[3][2], self.vData[2][1], self.vData[2][2], - self.options.toolOffset)

else:

pointFour = self.changeLength(self.vData[2][1], self.vData[2][2], self.vData[3][1], self.vData[3][2],

(self.options.toolOffset - self.getLength(self.vData[2][1], self.vData[2][2], self.vData[3][1], self.vData[3][2])))

# get angle start and angle vector

angleStart = math.atan2(pointThree[1] - self.vData[2][2], pointThree[0] - self.vData[2][1])

angleVector = math.atan2(pointFour[1] - self.vData[2][2], pointFour[0] - self.vData[2][1]) - angleStart

# switch direction when arc is bigger than 180°

if angleVector > self.PI:

angleVector -= self.TWO_PI

elif angleVector < - self.PI:

angleVector += self.TWO_PI

# draw arc

if angleVector >= 0:

angle = angleStart + self.toolOffsetFlat

while angle < angleStart + angleVector:

self.storePoint('PD', self.vData[2][1] + math.cos(angle) * self.options.toolOffset, self.vData[2][2] + math.sin(angle) * self.options.toolOffset)

angle += self.toolOffsetFlat

else:

angle = angleStart - self.toolOffsetFlat

while angle > angleStart + angleVector:

self.storePoint('PD', self.vData[2][1] + math.cos(angle) * self.options.toolOffset, self.vData[2][2] + math.sin(angle) * self.options.toolOffset)

angle -= self.toolOffsetFlat

self.storePoint('PD', pointFour[0], pointFour[1])

def storePoint(self, command, x, y):

x = int(round(x))

y = int(round(y))

# skip when no change in movement

if self.lastPoint[0] == command and self.lastPoint[1] == x and self.lastPoint[2] == y:

return

if self.dryRun:

# find edges

if self.divergenceX == 'False' or x < self.divergenceX:

self.divergenceX = x

if self.divergenceY == 'False' or y < self.divergenceY:

self.divergenceY = y

if self.sizeX == 'False' or x > self.sizeX:

self.sizeX = x

if self.sizeY == 'False' or y > self.sizeY:

self.sizeY = y

else:

# store point

if not self.options.center:

# only positive values are allowed (usually)

if x < 0:

x = 0

if y < 0:

y = 0

# do not repeat command

if command == 'PD' and self.lastPoint[0] == 'PD':

self.hpgl += ',%d,%d' % (x, y)

else:

self.hpgl += ';%s%d,%d' % (command, x, y)

self.lastPoint = [command, x, y]