schppm.c revision 7c478bd95313f5f23a4c958a745db2134aa03244
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License, Version 1.0 only
* (the "License"). You may not use this file except in compliance
* with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright 1999-2002 Sun Microsystems, Inc. All rights reserved.
* Use is subject to license terms.
*/
#pragma ident "%Z%%M% %I% %E% SMI"
/*
* Schizo Power Management Driver
*
* This driver deals with Safari bus interface and it is used
* as part of the protocol to change the clock speed on Safari bus.
*
* The routine on this driver is referenced by Platform Power
* Management driver of systems like Excalibur. Driver is
* loaded because of an explicit dependency defined in PPM driver.
* PPM driver also attaches the driver.
*/
#include <sys/types.h>
#include <sys/conf.h>
#include <sys/ddi.h>
#include <sys/sunddi.h>
#include <sys/modctl.h>
/*
* Function prototypes
*/
static int spm_attach(dev_info_t *, ddi_attach_cmd_t);
static int spm_detach(dev_info_t *, ddi_detach_cmd_t);
/*
* Private data for schizo_pm driver
*/
static struct spm_soft_state {
dev_info_t *dip;
};
/*
* Configuration data structures
*/
static struct dev_ops spm_ops = {
DEVO_REV, /* devo_rev, */
0, /* refcnt */
nodev, /* getinfo */
nulldev, /* identify */
nulldev, /* probe */
spm_attach, /* attach */
spm_detach, /* detach */
nodev, /* reset */
(struct cb_ops *)0, /* cb_ops */
(struct bus_ops *)0, /* bus_ops */
NULL /* power */
};
/*
* Driver globals
*/
static void *spm_state;
static int spm_inst = -1;
static struct modldrv modldrv = {
&mod_driverops, /* Type of module = driver */
"schizo pm driver v%I%", /* name of module */
&spm_ops, /* driver ops */
};
static struct modlinkage modlinkage = {
MODREV_1,
(void *)&modldrv,
NULL
};
/*
* Schizo CSR E* bit masks
*/
#define SCHIZO_SAFARI_ECLK_32 0x20ULL
#define SCHIZO_SAFARI_ECLK_2 0x2ULL
#define SCHIZO_SAFARI_ECLK_1 0x1ULL
#define SCHIZO_SAFARI_ECLK_MASK (SCHIZO_SAFARI_ECLK_32 | \
SCHIZO_SAFARI_ECLK_2 | SCHIZO_SAFARI_ECLK_1)
/*
* bit masks to set schizo clock in parallel with setting cpu clock.
* Used when changing cpu speeds.
*
* NOTE: The order of entries must be from slowest to fastest.
*/
static const uint64_t schizo_safari_masks[] = {
SCHIZO_SAFARI_ECLK_32,
SCHIZO_SAFARI_ECLK_2,
SCHIZO_SAFARI_ECLK_1
};
/*
* Normally, the address of the registers we use would be accessed from
* our "official" private data. However, since the dip is not passed
* in when spm_change_speed (see below) is called, and since there is
* only one unit of the spm "device", we keep it here as a static.
*/
static volatile uint64_t *spm_schizo_csr;
ddi_acc_handle_t spm_schizo_handle;
int
_init(void)
{
int error;
if ((error = ddi_soft_state_init(&spm_state,
sizeof (struct spm_soft_state), 0)) != 0)
return (error);
if ((error = mod_install(&modlinkage)) != 0)
ddi_soft_state_fini(&spm_state);
return (error);
}
int
_fini(void)
{
int error;
if ((error = mod_remove(&modlinkage)) == 0)
ddi_soft_state_fini(&spm_state);
return (error);
}
int
_info(struct modinfo *modinfop)
{
return (mod_info(&modlinkage, modinfop));
}
static int
spm_attach(dev_info_t *dip, ddi_attach_cmd_t cmd)
{
int rv;
struct spm_soft_state *softsp;
ddi_device_acc_attr_t attr;
switch (cmd) {
case DDI_ATTACH:
if (spm_inst != -1) {
cmn_err(CE_WARN, "spm_attach: "
"only one instance is allowed.");
return (DDI_FAILURE);
}
break;
case DDI_RESUME:
return (DDI_SUCCESS);
default:
return (DDI_FAILURE);
}
spm_inst = ddi_get_instance(dip);
if (ddi_soft_state_zalloc(spm_state, spm_inst) != DDI_SUCCESS) {
cmn_err(CE_WARN, "spm_attach: can't allocate state.");
return (DDI_FAILURE);
}
if ((softsp = ddi_get_soft_state(spm_state, spm_inst)) == NULL) {
cmn_err(CE_WARN, "spm_attach: can't get state.");
return (DDI_FAILURE);
}
softsp->dip = dip;
attr.devacc_attr_version = DDI_DEVICE_ATTR_V0;
attr.devacc_attr_endian_flags = DDI_NEVERSWAP_ACC;
attr.devacc_attr_dataorder = DDI_STRICTORDER_ACC;
/*
* Map the Safari E* Control register.
*/
rv = ddi_regs_map_setup(dip, 0,
(caddr_t *)&spm_schizo_csr, 0, 8, &attr, &spm_schizo_handle);
if (rv != DDI_SUCCESS) {
cmn_err(CE_WARN, "spm_attach: can't map the register.");
ddi_soft_state_free(spm_state, spm_inst);
return (rv);
}
ddi_report_dev(dip);
return (DDI_SUCCESS);
}
/*ARGSUSED*/
static int
spm_detach(dev_info_t *dip, ddi_detach_cmd_t cmd)
{
switch (cmd) {
case DDI_SUSPEND:
return (DDI_SUCCESS);
case DDI_DETACH:
return (DDI_FAILURE);
default:
return (DDI_FAILURE);
}
}
/*
* This globally visible function is the main reason this driver exists.
* It will be called by a platform power management driver to write to
* the schizo ASIC csr which changes schizo's clock rate. This is a
* required step when changing the clock of the cpus.
*
* NOTE - The caller should enter this routine sequentially.
*/
void
spm_change_schizo_speed(int lvl_index)
{
uint64_t contents;
ASSERT(lvl_index >= 0 && lvl_index <= 2);
contents = ddi_get64(spm_schizo_handle, (uint64_t *)spm_schizo_csr);
contents &= ~SCHIZO_SAFARI_ECLK_MASK;
contents |= schizo_safari_masks[ lvl_index ];
ddi_put64(spm_schizo_handle, (uint64_t *)spm_schizo_csr, contents);
}