chicago/io/ppm.conf

	ppm.conf revision e7147e44195a7880e2fcbb05656dfa2407339b0a
#
# CDDL HEADER START
#
# The contents of this file are subject to the terms of the
# Common Development and Distribution License, Version 1.0 only
# (the "License").  You may not use this file except in compliance
# with the License.
#
# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
# or http://www.opensolaris.org/os/licensing.
# See the License for the specific language governing permissions
# and limitations under the License.
#
# When distributing Covered Code, include this CDDL HEADER in each
# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
# If applicable, add the following below this CDDL HEADER, with the
# fields enclosed by brackets "[]" replaced with your own identifying
# information: Portions Copyright [yyyy] [name of copyright owner]
#
# CDDL HEADER END
#
#
# Copyright 2005 Sun Microsystems, Inc.  All rights reserved.
# Use is subject to license terms.
#
#pragma ident   "%Z%%M% %I% %E% SMI"
#

name="ppm" parent="pseudo" instance=0;

#
# ppm configuration format
#
# "ppm-domains" - in form of "domain_xxx" where "xxx" string highlights
# the nature of the domain;
#
# "domain_xxx-model" - PM model: CPU, PCI, PCI_PROP, PCIE, FET or LED.
#
# "domain_xxx-propname" - a property name that is exported by device in
# a domain.  Currently, it is used by PCI_PROP model to identify devices
# that are to have their clocks stopped when all power-manageable devices
# in the domain are at D3 power level.
#
# "domain-xxx-devices" - a list of prom path match patterns to match devices
# that fall into "domain_xxx", where wildcard '*' is allowed by observing
# the following expectations:
#   . a single wildcard with exact match up to (but exclude) the wildcard
#     which then terminates the match pattern;
#   . a single wildcard that does not terminate a match pattern must
#     match driver name (followed by '@');
#   . with two wildcard occurences, the first is to match driver name,
#     the second function id, as well as the last character of the match
#     pattern.
#
# "domain-xxx-ctrl" - blank space separated definitions in the form of
# keyword=definition [keyword=definition...]
#    The keywords are as follows, where 'method' must come before mask as it
#       tells how to store 'mask' and 'val'.  Missing 'val' defaults to 0.
#
#    which keywords apply depends on cmd.  There are two sets as shown below.
#    Here is the first:
#   cmd=[CPU_GO | LED_ON | LED_OFF | FET_ON | FET_OFF | CLK_ON | CLK_OFF]
#   path=<prompath> - control device's prom pathname (includes minor)
#   method=[KIO|I2CKIO] This selects a method which may be
#       an ioctl that sets a single value or an i2c ioctl that
#       takes a value and a mask to access gpio register
#   iord=<integer> - value of ioctl command for reading
#   iowr=<integer> - value of ioctl command for writing
#   val=<integer>   - a single integer value, generally the value to which
#             the relevant bits of a register will be set
#   mask=<integer>  - which bits of val are relevant (if method is I2CKIO)
#
#    Here is the second:
#   cmd=[CPU_NEXT | PRE_CHNG | POST_CHNG]
#   path=<prompath>    - control device's prom pathname, including minor
#   method=[CPUSPEEDKIO | VCORE]  This selects a method that uses
#                information like cpu speed index, value for
#                adjust cpu core voltage, delays, etc.
#   iowr=<integer>     - value of ioctl write command
#   speeds=<integer>   - indicates the number of cpu speeds that are
#                supported

ppm-domains="domain_cpu", "domain_diskfet1", "domain_diskfet2", "domain_diskfet3",
    "domain_diskfet4", "domain_led", "domain_pciegfx";

#
# 0x6a02 is JBPPMIOC_NEXT   (('j' << 8) | 2)
# 0x6a03 is JBPPMIOC_GO     (('j' << 8) | 3)
#
domain_cpu-devices="/SUNW,UltraSPARC-IIIi@*", "/SUNW,UltraSPARC-IIIi+@*";
domain_cpu-model="CPU";
domain_cpu-control=
    "cmd=CPU_NEXT path=/ppm@1f,0:jbus-ppm method=CPUSPEEDKIO iowr=0x6a02 speeds=3",
    "cmd=CPU_GO path=/ppm@1f,0:jbus-ppm method=KIO iowr=0x6a03 val=0";

#
# iowr -- 0x4D82 is GPIO_SET_OUTPUT per sys/i2c/clients/i2c_gpio.h file
# iord -- 0x4D80 is GPIO_GET_INPUT per sys/i2c/clients/i2c_gpio.h file
# mask -- bit mask for control pin
# val  -- pin value to set on/off
# delay -- minimum delay between FET off and FET on
# post_delay -- delay after turning on/off the FET
#
domain_diskfet1-devices = "/pci@1e,600000/pci@0/pci@a/pci@0/LSILogic,sas@0/sd@0,0";
domain_diskfet1-model = "FET";
domain_diskfet1-control =
    "cmd=FET_ON path=/ebus@1f,464000/i2c@3,80/gpio@0,30:pca9556_0 method=I2CKIO iowr=0x4D82 iord=0x4D80 mask=0x01 val=0x01 post_delay=1500000",
    "cmd=FET_OFF path=/ebus@1f,464000/i2c@3,80/gpio@0,30:pca9556_0 method=I2CKIO iowr=0x4D82 iord=0x4D80 mask=0x01 val=0";

domain_diskfet2-devices = "/pci@1e,600000/pci@0/pci@a/pci@0/LSILogic,sas@0/sd@1,0";
domain_diskfet2-model = "FET";
domain_diskfet2-control =
    "cmd=FET_ON path=/ebus@1f,464000/i2c@3,80/gpio@0,30:pca9556_0 method=I2CKIO iowr=0x4D82 iord=0x4D80 mask=0x02 val=0x02 post_delay=1500000",
    "cmd=FET_OFF path=/ebus@1f,464000/i2c@3,80/gpio@0,30:pca9556_0 method=I2CKIO iowr=0x4D82 iord=0x4D80 mask=0x02 val=0";

domain_diskfet3-devices = "/pci@1e,600000/pci@0/pci@a/pci@0/LSILogic,sas@0/sd@2,0";
domain_diskfet3-model = "FET";
domain_diskfet3-control =
    "cmd=FET_ON path=/ebus@1f,464000/i2c@3,80/gpio@0,30:pca9556_0 method=I2CKIO iowr=0x4D82 iord=0x4D80 mask=0x04 val=0x04 post_delay=1500000",
    "cmd=FET_OFF path=/ebus@1f,464000/i2c@3,80/gpio@0,30:pca9556_0 method=I2CKIO iowr=0x4D82 iord=0x4D80 mask=0x04 val=0";

domain_diskfet4-devices = "/pci@1e,600000/pci@0/pci@a/pci@0/LSILogic,sas@0/sd@3,0";
domain_diskfet4-model = "FET";
domain_diskfet4-control =
    "cmd=FET_ON path=/ebus@1f,464000/i2c@3,80/gpio@0,30:pca9556_0 method=I2CKIO iowr=0x4D82 iord=0x4D80 mask=0x08 val=0x08 post_delay=1500000",
    "cmd=FET_OFF path=/ebus@1f,464000/i2c@3,80/gpio@0,30:pca9556_0 method=I2CKIO iowr=0x4D82 iord=0x4D80 mask=0x08 val=0";

#
# Manipulate the front-panel LED.  This platform uses ACTIVE low.
#
# Note: no devices to claim in this domain
#
domain_led-devices = "";
domain_led-model = "LED";
domain_led-control =
    "cmd=LED_ON path=/i2c@1f,530000/gpio@0,30:pca9556_1 method=I2CKIO iowr=0x4D82 iord=0x0 mask=0x01 val=0x00",
    "cmd=LED_OFF path=/i2c@1f,530000/gpio@0,30:pca9556_1 method=I2CKIO iowr=0x4D82 iord=0x0 mask=0x01 val=0x01";

#
# PCI Express Primary Graphics Slot (directly attached to root complex(Fire))
#
domain_pciegfx-devices = "/pci@1f,700000/*";
domain_pciegfx-model = "PCIE";
domain_pciegfx-control =
    "cmd=PRE_PWR_OFF path=/pci@1f,700000:devctl method=KIO iowr=0x504D0001 val=0x00",
    "cmd=PRE_PWR_ON path=/pci@1f,700000:devctl method=KIO iowr=0x504D0002 val=0x00",
    "cmd=POST_PWR_ON path=/pci@1f,700000:devctl method=KIO iowr=0x504D0003 val=0x00 post_delay=100000",
    "cmd=CLK_OFF path=/i2c@1f,530000/gpio@0,30:pca9556_1 method=I2CKIO iowr=0x4D82 iord=0x0 mask=0x10 val=0x00",
    "cmd=CLK_ON path=/i2c@1f,530000/gpio@0,30:pca9556_1 method=I2CKIO iowr=0x4D82 iord=0x0 mask=0x10 val=0x10",
    "cmd=PWR_OFF path=/i2c@1f,530000/gpio@0,30:pca9556_1 method=I2CKIO iowr=0x4D82 iord=0x0 mask=0x08 val=0x00",
    "cmd=PWR_ON path=/i2c@1f,530000/gpio@0,30:pca9556_1 method=I2CKIO iowr=0x4D82 iord=0x0 mask=0x08 val=0x08",
    "cmd=RESET_OFF path=/i2c@1f,530000/gpio@0,30:pca9556_1 method=I2CKIO iowr=0x4D82 iord=0x0 mask=0x04 val=0x04 delay=10000",
    "cmd=RESET_ON path=/i2c@1f,530000/gpio@0,30:pca9556_1 method=I2CKIO iowr=0x4D82 iord=0x0 mask=0x04 val=0x00";