pcicfg.c revision 7f59ab1c87b64e613854fb759b15931264bd6307
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright (c) 1999, 2010, Oracle and/or its affiliates. All rights reserved.
*/
/*
* PCI configurator (pcicfg)
*/
#include <sys/sysmacros.h>
#include <sys/conf.h>
#include <sys/kmem.h>
#include <sys/debug.h>
#include <sys/modctl.h>
#include <sys/autoconf.h>
#include <sys/hwconf.h>
#include <sys/pcie.h>
#include <sys/pcie_impl.h>
#include <sys/pci_cap.h>
#include <sys/ddi.h>
#include <sys/sunndi.h>
#include <sys/hotplug/pci/pcicfg.h>
#include <sys/ndi_impldefs.h>
#include <sys/pci_cfgacc.h>
#include <sys/pcie_impl.h>
/*
* ************************************************************************
* *** Implementation specific local data structures/definitions. ***
* ************************************************************************
*/
static int pcicfg_start_devno = 0; /* for Debug only */
#define PCICFG_MAX_ARI_FUNCTION 256
#define PCICFG_NODEVICE 42
#define PCICFG_NOMEMORY 43
#define PCICFG_NOMULTI 44
#define PCICFG_NORESRC 45
#define PCICFG_HIADDR(n) ((uint32_t)(((uint64_t)(n) & \
0xFFFFFFFF00000000ULL)>> 32))
#define PCICFG_LOADDR(n) ((uint32_t)((uint64_t)(n) & 0x00000000FFFFFFFF))
#define PCICFG_LADDR(lo, hi) (((uint64_t)(hi) << 32) | (uint32_t)(lo))
#define PCICFG_HIWORD(n) ((uint16_t)(((uint32_t)(n) & 0xFFFF0000)>> 16))
#define PCICFG_LOWORD(n) ((uint16_t)((uint32_t)(n) & 0x0000FFFF))
#define PCICFG_HIBYTE(n) ((uint8_t)(((uint16_t)(n) & 0xFF00)>> 8))
#define PCICFG_LOBYTE(n) ((uint8_t)((uint16_t)(n) & 0x00FF))
#define PCICFG_ROUND_UP(addr, gran) ((uintptr_t)((gran+addr-1)&(~(gran-1))))
#define PCICFG_ROUND_DOWN(addr, gran) ((uintptr_t)((addr) & ~(gran-1)))
#define PCICFG_MEMGRAN 0x100000
#define PCICFG_IOGRAN 0x1000
#define PCICFG_4GIG_LIMIT 0xFFFFFFFFUL
#define PCICFG_MEM_MULT 4
#define PCICFG_IO_MULT 4
#define PCICFG_RANGE_LEN 3 /* Number of range entries */
static int pcicfg_slot_busnums = 8;
static int pcicfg_slot_memsize = 32 * PCICFG_MEMGRAN; /* 32MB per slot */
static int pcicfg_slot_pf_memsize = 32 * PCICFG_MEMGRAN; /* 32MB per slot */
static int pcicfg_slot_iosize = 64 * PCICFG_IOGRAN; /* 64K per slot */
static int pcicfg_sec_reset_delay = 3000000;
static int pcicfg_do_legacy_props = 1; /* create legacy compatible prop */
typedef struct hole hole_t;
struct hole {
uint64_t start;
uint64_t len;
hole_t *next;
};
typedef struct pcicfg_phdl pcicfg_phdl_t;
struct pcicfg_phdl {
dev_info_t *dip; /* Associated with the bridge */
dev_info_t *top_dip; /* top node of the attach point */
pcicfg_phdl_t *next;
/* non-prefetchable memory space */
uint64_t memory_base; /* Memory base for this attach point */
uint64_t memory_last;
uint64_t memory_len;
/* prefetchable memory space */
uint64_t pf_memory_base; /* PF Memory base for this Connection */
uint64_t pf_memory_last;
uint64_t pf_memory_len;
/* io space */
uint32_t io_base; /* I/O base for this attach point */
uint32_t io_last;
uint32_t io_len;
int error;
uint_t highest_bus; /* Highest bus seen on the probe */
hole_t mem_hole; /* Memory hole linked list. */
hole_t pf_mem_hole; /* PF Memory hole linked list. */
hole_t io_hole; /* IO hole linked list */
ndi_ra_request_t mem_req; /* allocator request for memory */
ndi_ra_request_t pf_mem_req; /* allocator request for PF memory */
ndi_ra_request_t io_req; /* allocator request for I/O */
};
struct pcicfg_standard_prop_entry {
uchar_t *name;
uint_t config_offset;
uint_t size;
};
struct pcicfg_name_entry {
uint32_t class_code;
char *name;
};
struct pcicfg_find_ctrl {
uint_t device;
uint_t function;
dev_info_t *dip;
};
/*
* List of Indirect Config Map Devices. At least the intent of the
* design is to look for a device in this list during the configure
* operation, and if the device is listed here, then it is a nontransparent
* bridge, hence load the driver and avail the config map services from
* the driver. Class and Subclass should be as defined in the PCI specs
* ie. class is 0x6, and subclass is 0x9.
*/
static struct {
uint8_t mem_range_bar_offset;
uint8_t io_range_bar_offset;
uint8_t prefetch_mem_range_bar_offset;
} pcicfg_indirect_map_devs[] = {
PCI_CONF_BASE3, PCI_CONF_BASE2, PCI_CONF_BASE3,
0, 0, 0,
};
#define PCICFG_MAKE_REG_HIGH(busnum, devnum, funcnum, register)\
(\
((ulong_t)(busnum & 0xff) << 16) |\
((ulong_t)(devnum & 0x1f) << 11) |\
((ulong_t)(funcnum & 0x7) << 8) |\
((ulong_t)(register & 0x3f)))
/*
* debug macros:
*/
#if defined(DEBUG)
extern void prom_printf(const char *, ...);
/*
* Following values are defined for this debug flag.
*
* 1 = dump configuration header only.
* 2 = dump generic debug data only (no config header dumped)
* 3 = dump everything (both 1 and 2)
*/
int pcicfg_debug = 0;
static void debug(char *, uintptr_t, uintptr_t,
uintptr_t, uintptr_t, uintptr_t);
#define DEBUG0(fmt)\
debug(fmt, 0, 0, 0, 0, 0);
#define DEBUG1(fmt, a1)\
debug(fmt, (uintptr_t)(a1), 0, 0, 0, 0);
#define DEBUG2(fmt, a1, a2)\
debug(fmt, (uintptr_t)(a1), (uintptr_t)(a2), 0, 0, 0);
#define DEBUG3(fmt, a1, a2, a3)\
debug(fmt, (uintptr_t)(a1), (uintptr_t)(a2),\
(uintptr_t)(a3), 0, 0);
#define DEBUG4(fmt, a1, a2, a3, a4)\
debug(fmt, (uintptr_t)(a1), (uintptr_t)(a2),\
(uintptr_t)(a3), (uintptr_t)(a4), 0);
#define DEBUG5(fmt, a1, a2, a3, a4, a5)\
debug(fmt, (uintptr_t)(a1), (uintptr_t)(a2),\
(uintptr_t)(a3), (uintptr_t)(a4), (uintptr_t)(a5));
#else
#define DEBUG0(fmt)
#define DEBUG1(fmt, a1)
#define DEBUG2(fmt, a1, a2)
#define DEBUG3(fmt, a1, a2, a3)
#define DEBUG4(fmt, a1, a2, a3, a4)
#define DEBUG5(fmt, a1, a2, a3, a4, a5)
#endif
/*
* forward declarations for routines defined in this module (called here)
*/
static int pcicfg_add_config_reg(dev_info_t *,
uint_t, uint_t, uint_t);
static int pcicfg_probe_children(dev_info_t *, uint_t, uint_t, uint_t,
uint_t *, pcicfg_flags_t, boolean_t);
static int pcicfg_match_dev(dev_info_t *, void *);
static dev_info_t *pcicfg_devi_find(dev_info_t *, uint_t, uint_t);
static pcicfg_phdl_t *pcicfg_find_phdl(dev_info_t *);
static pcicfg_phdl_t *pcicfg_create_phdl(dev_info_t *);
static int pcicfg_destroy_phdl(dev_info_t *);
static int pcicfg_sum_resources(dev_info_t *, void *);
static int pcicfg_device_assign(dev_info_t *);
static int pcicfg_bridge_assign(dev_info_t *, void *);
static int pcicfg_device_assign_readonly(dev_info_t *);
static int pcicfg_free_resources(dev_info_t *, pcicfg_flags_t);
static void pcicfg_setup_bridge(pcicfg_phdl_t *, ddi_acc_handle_t);
static void pcicfg_update_bridge(pcicfg_phdl_t *, ddi_acc_handle_t);
static int pcicfg_update_assigned_prop(dev_info_t *, pci_regspec_t *);
static void pcicfg_device_on(ddi_acc_handle_t);
static void pcicfg_device_off(ddi_acc_handle_t);
static int pcicfg_set_busnode_props(dev_info_t *, uint8_t);
static int pcicfg_free_bridge_resources(dev_info_t *);
static int pcicfg_free_device_resources(dev_info_t *);
static int pcicfg_teardown_device(dev_info_t *, pcicfg_flags_t, boolean_t);
static void pcicfg_reparent_node(dev_info_t *, dev_info_t *);
static int pcicfg_config_setup(dev_info_t *, ddi_acc_handle_t *);
static void pcicfg_config_teardown(ddi_acc_handle_t *);
static void pcicfg_get_mem(pcicfg_phdl_t *, uint32_t, uint64_t *);
static void pcicfg_get_pf_mem(pcicfg_phdl_t *, uint32_t, uint64_t *);
static void pcicfg_get_io(pcicfg_phdl_t *, uint32_t, uint32_t *);
static int pcicfg_update_ranges_prop(dev_info_t *, ppb_ranges_t *);
static int pcicfg_configure_ntbridge(dev_info_t *, uint_t, uint_t);
static uint_t pcicfg_ntbridge_child(dev_info_t *);
static uint_t pcicfg_get_ntbridge_child_range(dev_info_t *, uint64_t *,
uint64_t *, uint_t);
static int pcicfg_is_ntbridge(dev_info_t *);
static int pcicfg_ntbridge_allocate_resources(dev_info_t *);
static int pcicfg_ntbridge_configure_done(dev_info_t *);
static int pcicfg_ntbridge_program_child(dev_info_t *);
static uint_t pcicfg_ntbridge_unconfigure(dev_info_t *);
static int pcicfg_ntbridge_unconfigure_child(dev_info_t *, uint_t);
static void pcicfg_free_hole(hole_t *);
static uint64_t pcicfg_alloc_hole(hole_t *, uint64_t *, uint32_t);
static int pcicfg_device_type(dev_info_t *, ddi_acc_handle_t *);
static void pcicfg_update_phdl(dev_info_t *, uint8_t, uint8_t);
static int pcicfg_get_cap(ddi_acc_handle_t, uint8_t);
static uint8_t pcicfg_get_nslots(dev_info_t *, ddi_acc_handle_t);
static int pcicfg_pcie_dev(dev_info_t *, ddi_acc_handle_t);
static int pcicfg_pcie_device_type(dev_info_t *, ddi_acc_handle_t);
static int pcicfg_pcie_port_type(dev_info_t *, ddi_acc_handle_t);
static int pcicfg_probe_bridge(dev_info_t *, ddi_acc_handle_t, uint_t,
uint_t *, boolean_t);
static int pcicfg_find_resource_end(dev_info_t *, void *);
static boolean_t is_pcie_fabric(dev_info_t *);
static int pcicfg_populate_reg_props(dev_info_t *, ddi_acc_handle_t);
static int pcicfg_populate_props_from_bar(dev_info_t *, ddi_acc_handle_t);
static int pcicfg_update_assigned_prop_value(dev_info_t *, uint32_t,
uint32_t, uint32_t, uint_t);
static int pcicfg_ari_configure(dev_info_t *);
#ifdef DEBUG
static void pcicfg_dump_common_config(ddi_acc_handle_t config_handle);
static void pcicfg_dump_device_config(ddi_acc_handle_t);
static void pcicfg_dump_bridge_config(ddi_acc_handle_t config_handle);
static uint64_t pcicfg_unused_space(hole_t *, uint32_t *);
#define PCICFG_DUMP_COMMON_CONFIG(hdl) (void)pcicfg_dump_common_config(hdl)
#define PCICFG_DUMP_DEVICE_CONFIG(hdl) (void)pcicfg_dump_device_config(hdl)
#define PCICFG_DUMP_BRIDGE_CONFIG(hdl) (void)pcicfg_dump_bridge_config(hdl)
#else
#define PCICFG_DUMP_COMMON_CONFIG(handle)
#define PCICFG_DUMP_DEVICE_CONFIG(handle)
#define PCICFG_DUMP_BRIDGE_CONFIG(handle)
#endif
static kmutex_t pcicfg_list_mutex; /* Protects the probe handle list */
static pcicfg_phdl_t *pcicfg_phdl_list = NULL;
#ifndef _DONT_USE_1275_GENERIC_NAMES
/*
* Class code table
*/
static struct pcicfg_name_entry pcicfg_class_lookup [] = {
{ 0x001, "display" },
{ 0x100, "scsi" },
{ 0x101, "ide" },
{ 0x102, "fdc" },
{ 0x103, "ipi" },
{ 0x104, "raid" },
{ 0x105, "ata" },
{ 0x106, "sata" },
{ 0x200, "ethernet" },
{ 0x201, "token-ring" },
{ 0x202, "fddi" },
{ 0x203, "atm" },
{ 0x204, "isdn" },
{ 0x206, "mcd" },
{ 0x300, "display" },
{ 0x400, "video" },
{ 0x401, "sound" },
{ 0x500, "memory" },
{ 0x501, "flash" },
{ 0x600, "host" },
{ 0x601, "isa" },
{ 0x602, "eisa" },
{ 0x603, "mca" },
{ 0x604, "pci" },
{ 0x605, "pcmcia" },
{ 0x606, "nubus" },
{ 0x607, "cardbus" },
{ 0x609, "pci" },
{ 0x60a, "ib-pci" },
{ 0x700, "serial" },
{ 0x701, "parallel" },
{ 0x800, "interrupt-controller" },
{ 0x801, "dma-controller" },
{ 0x802, "timer" },
{ 0x803, "rtc" },
{ 0x900, "keyboard" },
{ 0x901, "pen" },
{ 0x902, "mouse" },
{ 0xa00, "dock" },
{ 0xb00, "cpu" },
{ 0xb01, "cpu" },
{ 0xb02, "cpu" },
{ 0xb10, "cpu" },
{ 0xb20, "cpu" },
{ 0xb30, "cpu" },
{ 0xb40, "coproc" },
{ 0xc00, "firewire" },
{ 0xc01, "access-bus" },
{ 0xc02, "ssa" },
{ 0xc03, "usb" },
{ 0xc04, "fibre-channel" },
{ 0xc05, "smbus" },
{ 0xc06, "ib" },
{ 0xd00, "irda" },
{ 0xd01, "ir" },
{ 0xd10, "rf" },
{ 0xd11, "btooth" },
{ 0xd12, "brdband" },
{ 0xd20, "802.11a" },
{ 0xd21, "802.11b" },
{ 0xe00, "i2o" },
{ 0xf01, "tv" },
{ 0xf02, "audio" },
{ 0xf03, "voice" },
{ 0xf04, "data" },
{ 0, 0 }
};
#endif /* _DONT_USE_1275_GENERIC_NAMES */
/*
* Module control operations
*/
extern struct mod_ops mod_miscops;
static struct modlmisc modlmisc = {
&mod_miscops, /* Type of module */
"PCI configurator"
};
static struct modlinkage modlinkage = {
MODREV_1, (void *)&modlmisc, NULL
};
#ifdef DEBUG
static void
pcicfg_dump_common_config(ddi_acc_handle_t config_handle)
{
if ((pcicfg_debug & 1) == 0)
return;
prom_printf(" Vendor ID = [0x%x]\n",
pci_config_get16(config_handle, PCI_CONF_VENID));
prom_printf(" Device ID = [0x%x]\n",
pci_config_get16(config_handle, PCI_CONF_DEVID));
prom_printf(" Command REG = [0x%x]\n",
pci_config_get16(config_handle, PCI_CONF_COMM));
prom_printf(" Status REG = [0x%x]\n",
pci_config_get16(config_handle, PCI_CONF_STAT));
prom_printf(" Revision ID = [0x%x]\n",
pci_config_get8(config_handle, PCI_CONF_REVID));
prom_printf(" Prog Class = [0x%x]\n",
pci_config_get8(config_handle, PCI_CONF_PROGCLASS));
prom_printf(" Dev Class = [0x%x]\n",
pci_config_get8(config_handle, PCI_CONF_SUBCLASS));
prom_printf(" Base Class = [0x%x]\n",
pci_config_get8(config_handle, PCI_CONF_BASCLASS));
prom_printf(" Device ID = [0x%x]\n",
pci_config_get8(config_handle, PCI_CONF_CACHE_LINESZ));
prom_printf(" Header Type = [0x%x]\n",
pci_config_get8(config_handle, PCI_CONF_HEADER));
prom_printf(" BIST = [0x%x]\n",
pci_config_get8(config_handle, PCI_CONF_BIST));
prom_printf(" BASE 0 = [0x%x]\n",
pci_config_get32(config_handle, PCI_CONF_BASE0));
prom_printf(" BASE 1 = [0x%x]\n",
pci_config_get32(config_handle, PCI_CONF_BASE1));
}
static void
pcicfg_dump_device_config(ddi_acc_handle_t config_handle)
{
if ((pcicfg_debug & 1) == 0)
return;
pcicfg_dump_common_config(config_handle);
prom_printf(" BASE 2 = [0x%x]\n",
pci_config_get32(config_handle, PCI_CONF_BASE2));
prom_printf(" BASE 3 = [0x%x]\n",
pci_config_get32(config_handle, PCI_CONF_BASE3));
prom_printf(" BASE 4 = [0x%x]\n",
pci_config_get32(config_handle, PCI_CONF_BASE4));
prom_printf(" BASE 5 = [0x%x]\n",
pci_config_get32(config_handle, PCI_CONF_BASE5));
prom_printf(" Cardbus CIS = [0x%x]\n",
pci_config_get32(config_handle, PCI_CONF_CIS));
prom_printf(" Sub VID = [0x%x]\n",
pci_config_get16(config_handle, PCI_CONF_SUBVENID));
prom_printf(" Sub SID = [0x%x]\n",
pci_config_get16(config_handle, PCI_CONF_SUBSYSID));
prom_printf(" ROM = [0x%x]\n",
pci_config_get32(config_handle, PCI_CONF_ROM));
prom_printf(" I Line = [0x%x]\n",
pci_config_get8(config_handle, PCI_CONF_ILINE));
prom_printf(" I Pin = [0x%x]\n",
pci_config_get8(config_handle, PCI_CONF_IPIN));
prom_printf(" Max Grant = [0x%x]\n",
pci_config_get8(config_handle, PCI_CONF_MIN_G));
prom_printf(" Max Latent = [0x%x]\n",
pci_config_get8(config_handle, PCI_CONF_MAX_L));
}
static void
pcicfg_dump_bridge_config(ddi_acc_handle_t config_handle)
{
if ((pcicfg_debug & 1) == 0)
return;
pcicfg_dump_common_config(config_handle);
prom_printf("........................................\n");
prom_printf(" Pri Bus = [0x%x]\n",
pci_config_get8(config_handle, PCI_BCNF_PRIBUS));
prom_printf(" Sec Bus = [0x%x]\n",
pci_config_get8(config_handle, PCI_BCNF_SECBUS));
prom_printf(" Sub Bus = [0x%x]\n",
pci_config_get8(config_handle, PCI_BCNF_SUBBUS));
prom_printf(" Latency = [0x%x]\n",
pci_config_get8(config_handle, PCI_BCNF_LATENCY_TIMER));
prom_printf(" I/O Base LO = [0x%x]\n",
pci_config_get8(config_handle, PCI_BCNF_IO_BASE_LOW));
prom_printf(" I/O Lim LO = [0x%x]\n",
pci_config_get8(config_handle, PCI_BCNF_IO_LIMIT_LOW));
prom_printf(" Sec. Status = [0x%x]\n",
pci_config_get16(config_handle, PCI_BCNF_SEC_STATUS));
prom_printf(" Mem Base = [0x%x]\n",
pci_config_get16(config_handle, PCI_BCNF_MEM_BASE));
prom_printf(" Mem Limit = [0x%x]\n",
pci_config_get16(config_handle, PCI_BCNF_MEM_LIMIT));
prom_printf(" PF Mem Base = [0x%x]\n",
pci_config_get16(config_handle, PCI_BCNF_PF_BASE_LOW));
prom_printf(" PF Mem Lim = [0x%x]\n",
pci_config_get16(config_handle, PCI_BCNF_PF_LIMIT_LOW));
prom_printf(" PF Base HI = [0x%x]\n",
pci_config_get32(config_handle, PCI_BCNF_PF_BASE_HIGH));
prom_printf(" PF Lim HI = [0x%x]\n",
pci_config_get32(config_handle, PCI_BCNF_PF_LIMIT_HIGH));
prom_printf(" I/O Base HI = [0x%x]\n",
pci_config_get16(config_handle, PCI_BCNF_IO_BASE_HI));
prom_printf(" I/O Lim HI = [0x%x]\n",
pci_config_get16(config_handle, PCI_BCNF_IO_LIMIT_HI));
prom_printf(" ROM addr = [0x%x]\n",
pci_config_get32(config_handle, PCI_BCNF_ROM));
prom_printf(" Intr Line = [0x%x]\n",
pci_config_get8(config_handle, PCI_BCNF_ILINE));
prom_printf(" Intr Pin = [0x%x]\n",
pci_config_get8(config_handle, PCI_BCNF_IPIN));
prom_printf(" Bridge Ctrl = [0x%x]\n",
pci_config_get16(config_handle, PCI_BCNF_BCNTRL));
}
#endif
int
_init()
{
DEBUG0(" PCI configurator installed\n");
mutex_init(&pcicfg_list_mutex, NULL, MUTEX_DRIVER, NULL);
return (mod_install(&modlinkage));
}
int
_fini(void)
{
int error;
error = mod_remove(&modlinkage);
if (error != 0) {
return (error);
}
mutex_destroy(&pcicfg_list_mutex);
return (0);
}
int
_info(struct modinfo *modinfop)
{
return (mod_info(&modlinkage, modinfop));
}
/*
* In the following functions ndi_devi_enter() without holding the
* parent dip is sufficient. This is because pci dr is driven through
* opens on the nexus which is in the device tree path above the node
* being operated on, and implicitly held due to the open.
*/
/*
* This entry point is called to configure a device (and
* all its children) on the given bus. It is called when
* a new device is added to the PCI domain. This routine
* will create the device tree and program the devices
* registers.
*/
int
pcicfg_configure(dev_info_t *devi, uint_t device, uint_t function,
pcicfg_flags_t flags)
{
uint_t bus;
int len;
int func;
dev_info_t *attach_point;
pci_bus_range_t pci_bus_range;
int rv;
int circ;
uint_t highest_bus;
int ari_mode = B_FALSE;
int max_function = PCI_MAX_FUNCTIONS;
int trans_device;
dev_info_t *new_device;
boolean_t is_pcie;
if (flags == PCICFG_FLAG_ENABLE_ARI)
return (pcicfg_ari_configure(devi));
/*
* Start probing at the device specified in "device" on the
* "bus" specified.
*/
len = sizeof (pci_bus_range_t);
if (ddi_getlongprop_buf(DDI_DEV_T_ANY, devi, 0, "bus-range",
(caddr_t)&pci_bus_range, &len) != DDI_SUCCESS) {
DEBUG0("no bus-range property\n");
return (PCICFG_FAILURE);
}
bus = pci_bus_range.lo; /* primary bus number of this bus node */
attach_point = devi;
is_pcie = is_pcie_fabric(devi);
ndi_devi_enter(devi, &circ);
for (func = 0; func < max_function; ) {
if ((function != PCICFG_ALL_FUNC) && (function != func))
goto next;
if (ari_mode)
trans_device = func >> 3;
else
trans_device = device;
switch (rv = pcicfg_probe_children(attach_point,
bus, trans_device, func & 7, &highest_bus,
flags, is_pcie)) {
case PCICFG_NORESRC:
case PCICFG_FAILURE:
DEBUG2("configure failed: bus [0x%x] device "
"[0x%x]\n", bus, trans_device);
goto cleanup;
case PCICFG_NODEVICE:
DEBUG3("no device : bus "
"[0x%x] slot [0x%x] func [0x%x]\n",
bus, trans_device, func &7);
/*
* When walking the list of ARI functions
* we don't expect to see a non-present
* function, so we will stop walking
* the function list.
*/
if (ari_mode == B_TRUE)
break;
if (func)
goto next;
break;
default:
DEBUG3("configure: bus => [%d] "
"slot => [%d] func => [%d]\n",
bus, trans_device, func & 7);
break;
}
if (rv != PCICFG_SUCCESS)
break;
if ((new_device = pcicfg_devi_find(attach_point,
trans_device, func & 7)) == NULL) {
DEBUG0("Did'nt find device node just created\n");
goto cleanup;
}
/*
* Up until now, we have detected a non transparent bridge
* (ntbridge) as a part of the generic probe code and
* configured only one configuration
* header which is the side facing the host bus.
* Now, configure the other side and create children.
*
* In order to make the process simpler, lets load the device
* driver for the non transparent bridge as this is a
* Solaris bundled driver, and use its configuration map
* services rather than programming it here.
* If the driver is not bundled into Solaris, it must be
* first loaded and configured before performing any
* hotplug operations.
*
* This not only makes the code here simpler but also more
* generic.
*
* So here we go.
*/
/*
* check if this is a bridge in nontransparent mode
*/
if (pcicfg_is_ntbridge(new_device) != DDI_FAILURE) {
DEBUG0("pcicfg: Found nontransparent bridge.\n");
rv = pcicfg_configure_ntbridge(new_device, bus,
trans_device);
if (rv != PCICFG_SUCCESS)
goto cleanup;
}
next:
/*
* Determine if ARI Forwarding should be enabled.
*/
if (func == 0) {
if ((pcie_ari_supported(devi)
== PCIE_ARI_FORW_SUPPORTED) &&
(pcie_ari_device(new_device) == PCIE_ARI_DEVICE)) {
if (pcie_ari_enable(devi) == DDI_SUCCESS) {
(void) ddi_prop_create(DDI_DEV_T_NONE,
devi, DDI_PROP_CANSLEEP,
"ari-enabled", NULL, 0);
ari_mode = B_TRUE;
max_function = PCICFG_MAX_ARI_FUNCTION;
}
}
}
if (ari_mode == B_TRUE) {
int next_function;
DEBUG0("Next Function - ARI Device\n");
if (pcie_ari_get_next_function(new_device,
&next_function) != DDI_SUCCESS)
goto cleanup;
/*
* Check if there are more fucntions to probe.
*/
if (next_function == 0) {
DEBUG0("Next Function - "
"No more ARI Functions\n");
break;
}
func = next_function;
} else {
func++;
}
DEBUG1("Next Function - %x\n", func);
}
ndi_devi_exit(devi, circ);
if (func == 0)
return (PCICFG_FAILURE); /* probe failed */
else
return (PCICFG_SUCCESS);
cleanup:
/*
* Clean up a partially created "probe state" tree.
* There are no resources allocated to the in the
* probe state.
*/
for (func = 0; func < PCI_MAX_FUNCTIONS; func++) {
if ((function != PCICFG_ALL_FUNC) && (function != func))
continue;
if ((new_device = pcicfg_devi_find(devi, device, func))
== NULL) {
continue;
}
DEBUG2("Cleaning up device [0x%x] function [0x%x]\n",
device, func);
/*
* If this was a bridge device it will have a
* probe handle - if not, no harm in calling this.
*/
(void) pcicfg_destroy_phdl(new_device);
if (is_pcie) {
/*
* free pcie_bus_t for the sub-tree
*/
if (ddi_get_child(new_device) != NULL)
pcie_fab_fini_bus(new_device, PCIE_BUS_ALL);
pcie_fini_bus(new_device, PCIE_BUS_ALL);
}
/*
* This will free up the node
*/
(void) ndi_devi_offline(new_device, NDI_DEVI_REMOVE);
}
ndi_devi_exit(devi, circ);
/*
* Use private return codes to help identify issues without debugging
* enabled. Resource limitations and mis-configurations are
* probably the most likely caue of configuration failures on x86.
* Convert return code back to values expected by the external
* consumer before returning so we will warn only once on the first
* encountered failure.
*/
if (rv == PCICFG_NORESRC) {
char *path = kmem_alloc(MAXPATHLEN, KM_SLEEP);
(void) ddi_pathname(devi, path);
cmn_err(CE_CONT, "?Not enough PCI resources to "
"configure: %s\n", path);
kmem_free(path, MAXPATHLEN);
rv = PCICFG_FAILURE;
}
return (rv);
}
/*
* configure the child nodes of ntbridge. new_device points to ntbridge itself
*/
/*ARGSUSED*/
static int
pcicfg_configure_ntbridge(dev_info_t *new_device, uint_t bus, uint_t device)
{
int bus_range[2], rc = PCICFG_FAILURE, rc1, max_devs = 0;
int devno;
dev_info_t *new_ntbridgechild;
ddi_acc_handle_t config_handle;
uint16_t vid;
uint64_t next_bus;
uint64_t blen;
ndi_ra_request_t req;
uint8_t pcie_device_type = 0;
/*
* If we need to do indirect config, lets create a property here
* to let the child conf map routine know that it has to
* go through the DDI calls, and not assume the devices are
* mapped directly under the host.
*/
if ((rc = ndi_prop_update_int(DDI_DEV_T_NONE, new_device,
PCI_DEV_CONF_MAP_PROP, (int)DDI_SUCCESS)) != DDI_SUCCESS) {
DEBUG0("Cannot create indirect conf map property.\n");
return ((int)PCICFG_FAILURE);
}
if (pci_config_setup(new_device, &config_handle) != DDI_SUCCESS)
return (PCICFG_FAILURE);
/* check if we are PCIe device */
if (pcicfg_pcie_device_type(new_device, config_handle) == DDI_SUCCESS) {
DEBUG0("PCIe device detected\n");
pcie_device_type = 1;
}
pci_config_teardown(&config_handle);
/* create Bus node properties for ntbridge. */
if (pcicfg_set_busnode_props(new_device, pcie_device_type)
!= PCICFG_SUCCESS) {
DEBUG0("Failed to set busnode props\n");
return (rc);
}
/* For now: Lets only support one layer of child */
bzero((caddr_t)&req, sizeof (ndi_ra_request_t));
req.ra_len = 1;
if (ndi_ra_alloc(ddi_get_parent(new_device), &req, &next_bus, &blen,
NDI_RA_TYPE_PCI_BUSNUM, NDI_RA_PASS) != NDI_SUCCESS) {
DEBUG0("ntbridge: Failed to get a bus number\n");
return (PCICFG_NORESRC);
}
DEBUG1("ntbridge bus range start ->[%d]\n", next_bus);
/*
* Following will change, as we detect more bridges
* on the way.
*/
bus_range[0] = (int)next_bus;
bus_range[1] = (int)next_bus;
if (ndi_prop_update_int_array(DDI_DEV_T_NONE, new_device, "bus-range",
bus_range, 2) != DDI_SUCCESS) {
DEBUG0("Cannot set ntbridge bus-range property");
return (rc);
}
/*
* The other interface (away from the host) will be
* initialized by the nexus driver when it loads.
* We just have to set the registers and the nexus driver
* figures out the rest.
*/
/*
* finally, lets load and attach the driver
* before configuring children of ntbridge.
*/
rc = ndi_devi_online(new_device, NDI_ONLINE_ATTACH|NDI_CONFIG);
if (rc != NDI_SUCCESS) {
cmn_err(CE_WARN,
"pcicfg: Fail:cant load nontransparent bridgd driver..\n");
rc = PCICFG_FAILURE;
return (rc);
}
DEBUG0("pcicfg: Success loading nontransparent bridge nexus driver..");
/* Now set aside pci resource allocation requests for our children */
if (pcicfg_ntbridge_allocate_resources(new_device) != PCICFG_SUCCESS) {
max_devs = 0;
rc = PCICFG_FAILURE;
} else
max_devs = PCI_MAX_DEVICES;
/* Probe devices on 2nd bus */
rc = PCICFG_SUCCESS;
for (devno = pcicfg_start_devno; devno < max_devs; devno++) {
ndi_devi_alloc_sleep(new_device, DEVI_PSEUDO_NEXNAME,
(pnode_t)DEVI_SID_NODEID, &new_ntbridgechild);
if (pcicfg_add_config_reg(new_ntbridgechild, next_bus, devno, 0)
!= DDI_PROP_SUCCESS) {
cmn_err(CE_WARN,
"Failed to add conf reg for ntbridge child.\n");
(void) ndi_devi_free(new_ntbridgechild);
rc = PCICFG_FAILURE;
break;
}
if (pci_config_setup(new_ntbridgechild, &config_handle)
!= DDI_SUCCESS) {
cmn_err(CE_WARN,
"Cannot map ntbridge child %x\n", devno);
(void) ndi_devi_free(new_ntbridgechild);
rc = PCICFG_FAILURE;
break;
}
/*
* See if there is any PCI HW at this location
* by reading the Vendor ID. If it returns with 0xffff
* then there is no hardware at this location.
*/
vid = pci_config_get16(config_handle, PCI_CONF_VENID);
pci_config_teardown(&config_handle);
(void) ndi_devi_free(new_ntbridgechild);
if (vid == 0xffff)
continue;
/* Lets fake attachments points for each child, */
rc = pcicfg_configure(new_device, devno, PCICFG_ALL_FUNC, 0);
if (rc != PCICFG_SUCCESS) {
int old_dev = pcicfg_start_devno;
cmn_err(CE_WARN,
"Error configuring ntbridge child dev=%d\n", devno);
while (old_dev != devno) {
if (pcicfg_ntbridge_unconfigure_child(
new_device, old_dev) == PCICFG_FAILURE)
cmn_err(CE_WARN, "Unconfig Error "
"ntbridge child dev=%d\n", old_dev);
old_dev++;
}
break;
}
} /* devno loop */
DEBUG1("ntbridge: finish probing 2nd bus, rc=%d\n", rc);
if (rc == PCICFG_SUCCESS)
rc = pcicfg_ntbridge_configure_done(new_device);
else {
pcicfg_phdl_t *entry = pcicfg_find_phdl(new_device);
uint_t *bus;
int k;
if (ddi_getlongprop(DDI_DEV_T_ANY, new_device,
DDI_PROP_DONTPASS, "bus-range", (caddr_t)&bus, &k)
!= DDI_PROP_SUCCESS) {
DEBUG0("Failed to read bus-range property\n");
rc = PCICFG_FAILURE;
return (rc);
}
DEBUG2("Need to free bus [%d] range [%d]\n",
bus[0], bus[1] - bus[0] + 1);
if (ndi_ra_free(ddi_get_parent(new_device), (uint64_t)bus[0],
(uint64_t)(bus[1] - bus[0] + 1), NDI_RA_TYPE_PCI_BUSNUM,
NDI_RA_PASS) != NDI_SUCCESS) {
DEBUG0("Failed to free a bus number\n");
rc = PCICFG_FAILURE;
kmem_free(bus, k);
return (rc);
}
/*
* Since no memory allocations are done for non transparent
* bridges (but instead we just set the handle with the
* already allocated memory, we just need to reset the
* following values before calling the destroy_phdl()
* function next, otherwise the it will try to free
* memory allocated as in case of a transparent bridge.
*/
entry->memory_len = 0;
entry->pf_memory_len = 0;
entry->io_len = 0;
kmem_free(bus, k);
/* the following will free hole data. */
(void) pcicfg_destroy_phdl(new_device);
}
/*
* Unload driver just in case child configure failed!
*/
rc1 = ndi_devi_offline(new_device, 0);
DEBUG1("pcicfg: now unloading the ntbridge driver. rc1=%d\n", rc1);
if (rc1 != NDI_SUCCESS) {
cmn_err(CE_WARN,
"pcicfg: cant unload ntbridge driver..children.\n");
rc = PCICFG_FAILURE;
}
return (rc);
}
static int
pcicfg_ntbridge_allocate_resources(dev_info_t *dip)
{
pcicfg_phdl_t *phdl;
ndi_ra_request_t *mem_request;
ndi_ra_request_t *pf_mem_request;
ndi_ra_request_t *io_request;
uint64_t boundbase, boundlen;
phdl = pcicfg_find_phdl(dip);
ASSERT(phdl);
mem_request = &phdl->mem_req;
pf_mem_request = &phdl->pf_mem_req;
io_request = &phdl->io_req;
phdl->error = PCICFG_SUCCESS;
/* Set Memory space handle for ntbridge */
if (pcicfg_get_ntbridge_child_range(dip, &boundbase, &boundlen,
PCI_BASE_SPACE_MEM) != DDI_SUCCESS) {
cmn_err(CE_WARN,
"ntbridge: Mem resource information failure\n");
phdl->memory_len = 0;
return (PCICFG_FAILURE);
}
mem_request->ra_boundbase = boundbase;
mem_request->ra_boundlen = boundbase + boundlen;
mem_request->ra_len = boundlen;
mem_request->ra_align_mask =
PCICFG_MEMGRAN - 1; /* 1M alignment on memory space */
mem_request->ra_flags |= NDI_RA_ALLOC_BOUNDED;
/*
* mem_request->ra_len =
* PCICFG_ROUND_UP(mem_request->ra_len, PCICFG_MEMGRAN);
*/
phdl->memory_base = phdl->memory_last = boundbase;
phdl->memory_len = boundlen;
phdl->mem_hole.start = phdl->memory_base;
phdl->mem_hole.len = mem_request->ra_len;
phdl->mem_hole.next = (hole_t *)NULL;
DEBUG2("Connector requested [0x%llx], needs [0x%llx] bytes of memory\n",
boundlen, mem_request->ra_len);
/* Set IO space handle for ntbridge */
if (pcicfg_get_ntbridge_child_range(dip, &boundbase, &boundlen,
PCI_BASE_SPACE_IO) != DDI_SUCCESS) {
cmn_err(CE_WARN, "ntbridge: IO resource information failure\n");
phdl->io_len = 0;
return (PCICFG_FAILURE);
}
io_request->ra_len = boundlen;
io_request->ra_align_mask =
PCICFG_IOGRAN - 1; /* 4K alignment on I/O space */
io_request->ra_boundbase = boundbase;
io_request->ra_boundlen = boundbase + boundlen;
io_request->ra_flags |= NDI_RA_ALLOC_BOUNDED;
/*
* io_request->ra_len =
* PCICFG_ROUND_UP(io_request->ra_len, PCICFG_IOGRAN);
*/
phdl->io_base = phdl->io_last = (uint32_t)boundbase;
phdl->io_len = (uint32_t)boundlen;
phdl->io_hole.start = phdl->io_base;
phdl->io_hole.len = io_request->ra_len;
phdl->io_hole.next = (hole_t *)NULL;
DEBUG2("Connector requested [0x%llx], needs [0x%llx] bytes of IO\n",
boundlen, io_request->ra_len);
/* Set Prefetchable Memory space handle for ntbridge */
if (pcicfg_get_ntbridge_child_range(dip, &boundbase, &boundlen,
PCI_BASE_SPACE_MEM | PCI_BASE_PREF_M) != DDI_SUCCESS) {
cmn_err(CE_WARN,
"ntbridge: PF Mem resource information failure\n");
phdl->pf_memory_len = 0;
return (PCICFG_FAILURE);
}
pf_mem_request->ra_boundbase = boundbase;
pf_mem_request->ra_boundlen = boundbase + boundlen;
pf_mem_request->ra_len = boundlen;
pf_mem_request->ra_align_mask =
PCICFG_MEMGRAN - 1; /* 1M alignment on memory space */
pf_mem_request->ra_flags |= NDI_RA_ALLOC_BOUNDED;
/*
* pf_mem_request->ra_len =
* PCICFG_ROUND_UP(pf_mem_request->ra_len, PCICFG_MEMGRAN);
*/
phdl->pf_memory_base = phdl->pf_memory_last = boundbase;
phdl->pf_memory_len = boundlen;
phdl->pf_mem_hole.start = phdl->pf_memory_base;
phdl->pf_mem_hole.len = pf_mem_request->ra_len;
phdl->pf_mem_hole.next = (hole_t *)NULL;
DEBUG2("Connector requested [0x%llx], needs [0x%llx] bytes of PF "
"memory\n", boundlen, pf_mem_request->ra_len);
DEBUG2("MEMORY BASE = [0x%lx] length [0x%lx]\n",
phdl->memory_base, phdl->memory_len);
DEBUG2("IO BASE = [0x%x] length [0x%x]\n",
phdl->io_base, phdl->io_len);
DEBUG2("PF MEMORY BASE = [0x%lx] length [0x%lx]\n",
phdl->pf_memory_base, phdl->pf_memory_len);
return (PCICFG_SUCCESS);
}
static int
pcicfg_ntbridge_configure_done(dev_info_t *dip)
{
ppb_ranges_t range[PCICFG_RANGE_LEN];
pcicfg_phdl_t *entry;
uint_t len;
pci_bus_range_t bus_range;
int new_bus_range[2];
DEBUG1("Configuring children for %p\n", dip);
entry = pcicfg_find_phdl(dip);
ASSERT(entry);
bzero((caddr_t)range, sizeof (ppb_ranges_t) * PCICFG_RANGE_LEN);
range[1].child_high = range[1].parent_high |=
(PCI_REG_REL_M | PCI_ADDR_MEM32);
range[1].child_low = range[1].parent_low = (uint32_t)entry->memory_base;
range[0].child_high = range[0].parent_high |=
(PCI_REG_REL_M | PCI_ADDR_IO);
range[0].child_low = range[0].parent_low = (uint32_t)entry->io_base;
range[2].child_high = range[2].parent_high |=
(PCI_REG_REL_M | PCI_ADDR_MEM32 | PCI_REG_PF_M);
range[2].child_low = range[2].parent_low =
(uint32_t)entry->pf_memory_base;
len = sizeof (pci_bus_range_t);
if (ddi_getlongprop_buf(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS,
"bus-range", (caddr_t)&bus_range, (int *)&len) != DDI_SUCCESS) {
DEBUG0("no bus-range property\n");
return (PCICFG_FAILURE);
}
new_bus_range[0] = bus_range.lo; /* primary bus number */
if (entry->highest_bus) { /* secondary bus number */
if (entry->highest_bus < bus_range.lo) {
cmn_err(CE_WARN,
"ntbridge bus range invalid !(%d,%d)\n",
bus_range.lo, entry->highest_bus);
new_bus_range[1] = bus_range.lo + entry->highest_bus;
}
else
new_bus_range[1] = entry->highest_bus;
}
else
new_bus_range[1] = bus_range.hi;
DEBUG2("ntbridge: bus range lo=%x, hi=%x\n", new_bus_range[0],
new_bus_range[1]);
if (ndi_prop_update_int_array(DDI_DEV_T_NONE, dip, "bus-range",
new_bus_range, 2) != DDI_SUCCESS) {
DEBUG0("Failed to set bus-range property");
entry->error = PCICFG_FAILURE;
return (PCICFG_FAILURE);
}
#ifdef DEBUG
{
uint64_t unused;
unused = pcicfg_unused_space(&entry->io_hole, &len);
DEBUG2("ntbridge: Unused IO space %llx bytes over %d holes\n",
unused, len);
}
#endif
range[0].size_low = entry->io_len;
if (pcicfg_update_ranges_prop(dip, &range[0])) {
DEBUG0("Failed to update ranges (i/o)\n");
entry->error = PCICFG_FAILURE;
return (PCICFG_FAILURE);
}
#ifdef DEBUG
{
uint64_t unused;
unused = pcicfg_unused_space(&entry->mem_hole, &len);
DEBUG2("ntbridge: Unused Mem space %llx bytes over %d holes\n",
unused, len);
}
#endif
range[1].size_low = entry->memory_len;
if (pcicfg_update_ranges_prop(dip, &range[1])) {
DEBUG0("Failed to update ranges (memory)\n");
entry->error = PCICFG_FAILURE;
return (PCICFG_FAILURE);
}
#ifdef DEBUG
{
uint64_t unused;
unused = pcicfg_unused_space(&entry->pf_mem_hole, &len);
DEBUG2("ntbridge: Unused PF Mem space %llx bytes over"
" %d holes\n", unused, len);
}
#endif
range[2].size_low = entry->pf_memory_len;
if (pcicfg_update_ranges_prop(dip, &range[2])) {
DEBUG0("Failed to update ranges (PF memory)\n");
entry->error = PCICFG_FAILURE;
return (PCICFG_FAILURE);
}
return (PCICFG_SUCCESS);
}
static int
pcicfg_ntbridge_program_child(dev_info_t *dip)
{
pcicfg_phdl_t *entry;
int rc = PCICFG_SUCCESS;
dev_info_t *anode = dip;
/* Find the Hotplug Connection (CN) node */
while ((anode != NULL) &&
(strcmp(ddi_binding_name(anode), "hp_attachment") != 0)) {
anode = ddi_get_parent(anode);
}
if (anode == NULL) {
DEBUG0("ntbridge child tree not in PROBE state\n");
return (PCICFG_FAILURE);
}
entry = pcicfg_find_phdl(ddi_get_parent(anode));
ASSERT(entry);
if (pcicfg_bridge_assign(dip, entry) == DDI_WALK_TERMINATE) {
cmn_err(CE_WARN,
"ntbridge: Error assigning range for child %s\n",
ddi_get_name(dip));
rc = PCICFG_FAILURE;
}
return (rc);
}
static int
pcicfg_ntbridge_unconfigure_child(dev_info_t *new_device, uint_t devno)
{
dev_info_t *new_ntbridgechild;
int len, bus;
uint16_t vid;
ddi_acc_handle_t config_handle;
pci_bus_range_t pci_bus_range;
len = sizeof (pci_bus_range_t);
if (ddi_getlongprop_buf(DDI_DEV_T_ANY, new_device, DDI_PROP_DONTPASS,
"bus-range", (caddr_t)&pci_bus_range, &len) != DDI_SUCCESS) {
DEBUG0("no bus-range property\n");
return (PCICFG_FAILURE);
}
bus = pci_bus_range.lo; /* primary bus number of this bus node */
ndi_devi_alloc_sleep(new_device, DEVI_PSEUDO_NEXNAME,
(pnode_t)DEVI_SID_NODEID, &new_ntbridgechild);
if (pcicfg_add_config_reg(new_ntbridgechild, bus, devno, 0)
!= DDI_PROP_SUCCESS) {
cmn_err(CE_WARN, "Unconfigure: Failed to add conf reg prop for "
"ntbridge child.\n");
(void) ndi_devi_free(new_ntbridgechild);
return (PCICFG_FAILURE);
}
if (pci_config_setup(new_ntbridgechild, &config_handle)
!= DDI_SUCCESS) {
cmn_err(CE_WARN, "pcicfg: Cannot map ntbridge child %x\n",
devno);
(void) ndi_devi_free(new_ntbridgechild);
return (PCICFG_FAILURE);
}
/*
* See if there is any PCI HW at this location
* by reading the Vendor ID. If it returns with 0xffff
* then there is no hardware at this location.
*/
vid = pci_config_get16(config_handle, PCI_CONF_VENID);
pci_config_teardown(&config_handle);
(void) ndi_devi_free(new_ntbridgechild);
if (vid == 0xffff)
return (PCICFG_NODEVICE);
return (pcicfg_unconfigure(new_device, devno, PCICFG_ALL_FUNC, 0));
}
static uint_t
pcicfg_ntbridge_unconfigure(dev_info_t *dip)
{
pcicfg_phdl_t *entry = pcicfg_find_phdl(dip);
uint_t *bus;
int k, rc = DDI_FAILURE;
if (ddi_getlongprop(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, "bus-range",
(caddr_t)&bus, &k) != DDI_PROP_SUCCESS) {
DEBUG0("ntbridge: Failed to read bus-range property\n");
return (rc);
}
DEBUG2("ntbridge: Need to free bus [%d] range [%d]\n",
bus[0], bus[1] - bus[0] + 1);
if (ndi_ra_free(ddi_get_parent(dip), (uint64_t)bus[0],
(uint64_t)(bus[1] - bus[0] + 1),
NDI_RA_TYPE_PCI_BUSNUM, NDI_RA_PASS) != NDI_SUCCESS) {
DEBUG0("ntbridge: Failed to free a bus number\n");
kmem_free(bus, k);
return (rc);
}
/*
* Since our resources will be freed at the parent level,
* just reset these values.
*/
entry->memory_len = 0;
entry->io_len = 0;
entry->pf_memory_len = 0;
kmem_free(bus, k);
/* the following will also free hole data. */
return (pcicfg_destroy_phdl(dip));
}
static int
pcicfg_is_ntbridge(dev_info_t *dip)
{
ddi_acc_handle_t config_handle;
uint8_t class, subclass;
int rc = DDI_SUCCESS;
if (pci_config_setup(dip, &config_handle) != DDI_SUCCESS) {
cmn_err(CE_WARN,
"pcicfg: cannot map config space, to get map type\n");
return (DDI_FAILURE);
}
class = pci_config_get8(config_handle, PCI_CONF_BASCLASS);
subclass = pci_config_get8(config_handle, PCI_CONF_SUBCLASS);
/* check for class=6, subclass=9, for non transparent bridges. */
if ((class != PCI_CLASS_BRIDGE) || (subclass != PCI_BRIDGE_STBRIDGE))
rc = DDI_FAILURE;
DEBUG3("pcicfg: checking device %x,%x for indirect map. rc=%d\n",
pci_config_get16(config_handle, PCI_CONF_VENID),
pci_config_get16(config_handle, PCI_CONF_DEVID),
rc);
pci_config_teardown(&config_handle);
return (rc);
}
static uint_t
pcicfg_ntbridge_child(dev_info_t *dip)
{
int len, val, rc = DDI_FAILURE;
dev_info_t *anode = dip;
/*
* Find the Hotplug Connection (CN) node
*/
while ((anode != NULL) && (strcmp(ddi_binding_name(anode),
"hp_attachment") != 0)) {
anode = ddi_get_parent(anode);
}
if (anode == NULL) {
DEBUG0("ntbridge child tree not in PROBE state\n");
return (rc);
}
len = sizeof (int);
if (ddi_getlongprop_buf(DDI_DEV_T_ANY, ddi_get_parent(anode),
DDI_PROP_DONTPASS, PCI_DEV_CONF_MAP_PROP, (caddr_t)&val, &len)
!= DDI_SUCCESS) {
DEBUG1("ntbridge child: no \"%s\" property\n",
PCI_DEV_CONF_MAP_PROP);
return (rc);
}
DEBUG0("ntbridge child: success\n");
return (DDI_SUCCESS);
}
static uint_t
pcicfg_get_ntbridge_child_range(dev_info_t *dip, uint64_t *boundbase,
uint64_t *boundlen, uint_t space_type)
{
int length, found = DDI_FAILURE, acount, i, ibridge;
pci_regspec_t *assigned;
if ((ibridge = pcicfg_is_ntbridge(dip)) == DDI_FAILURE)
return (found);
if (ddi_getlongprop(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS,
"assigned-addresses", (caddr_t)&assigned, &length)
!= DDI_PROP_SUCCESS) {
DEBUG1("Failed to get assigned-addresses property %llx\n", dip);
return (found);
}
DEBUG1("pcicfg: ntbridge child range: dip = %s\n",
ddi_driver_name(dip));
acount = length / sizeof (pci_regspec_t);
for (i = 0; i < acount; i++) {
if ((PCI_REG_REG_G(assigned[i].pci_phys_hi) ==
pcicfg_indirect_map_devs[ibridge].mem_range_bar_offset) &&
(space_type == PCI_BASE_SPACE_MEM)) {
found = DDI_SUCCESS;
break;
} else if ((PCI_REG_REG_G(assigned[i].pci_phys_hi) ==
pcicfg_indirect_map_devs[ibridge].io_range_bar_offset) &&
(space_type == PCI_BASE_SPACE_IO)) {
found = DDI_SUCCESS;
break;
} else if ((PCI_REG_REG_G(assigned[i].pci_phys_hi) ==
pcicfg_indirect_map_devs[ibridge].
prefetch_mem_range_bar_offset) &&
(space_type == (PCI_BASE_SPACE_MEM |
PCI_BASE_PREF_M))) {
found = DDI_SUCCESS;
break;
}
}
DEBUG3("pcicfg: ntbridge child range: space=%x, base=%lx, len=%lx\n",
space_type, assigned[i].pci_phys_low, assigned[i].pci_size_low);
if (found == DDI_SUCCESS) {
*boundbase = assigned[i].pci_phys_low;
*boundlen = assigned[i].pci_size_low;
}
kmem_free(assigned, length);
return (found);
}
/*
* This will turn resources allocated by pcicfg_configure()
* and remove the device tree from the Hotplug Connection (CN)
* and below. The routine assumes the devices have their
* drivers detached.
*/
int
pcicfg_unconfigure(dev_info_t *devi, uint_t device, uint_t function,
pcicfg_flags_t flags)
{
dev_info_t *child_dip;
int func;
int i;
int max_function, trans_device;
int circ;
boolean_t is_pcie;
if (pcie_ari_is_enabled(devi) == PCIE_ARI_FORW_ENABLED)
max_function = PCICFG_MAX_ARI_FUNCTION;
else
max_function = PCI_MAX_FUNCTIONS;
/*
* Cycle through devices to make sure none are busy.
* If a single device is busy fail the whole unconfigure.
*/
is_pcie = is_pcie_fabric(devi);
ndi_devi_enter(devi, &circ);
for (func = 0; func < max_function; func++) {
if ((function != PCICFG_ALL_FUNC) && (function != func))
continue;
if (max_function == PCICFG_MAX_ARI_FUNCTION)
trans_device = func >> 3; /* ARI Device */
else
trans_device = device;
if ((child_dip = pcicfg_devi_find(devi, trans_device,
func & 7)) == NULL)
continue;
if (ndi_devi_offline(child_dip, NDI_UNCONFIG) == NDI_SUCCESS)
continue;
/*
* Device function is busy. Before returning we have to
* put all functions back online which were taken
* offline during the process.
*/
DEBUG2("Device [0x%x] function [0x%x] is busy\n",
trans_device, func & 7);
/*
* If we are only asked to offline one specific function,
* and that fails, we just simply return.
*/
if (function != PCICFG_ALL_FUNC)
return (PCICFG_FAILURE);
for (i = 0; i < func; i++) {
if (max_function == PCICFG_MAX_ARI_FUNCTION)
trans_device = i >> 3;
if ((child_dip = pcicfg_devi_find(devi, trans_device,
i & 7)) == NULL) {
DEBUG0("No more devices to put back "
"on line!!\n");
/*
* Made it through all functions
*/
continue;
}
if (ndi_devi_online(child_dip, NDI_CONFIG)
!= NDI_SUCCESS) {
DEBUG0("Failed to put back devices state\n");
goto fail;
}
}
goto fail;
}
/*
* Now, tear down all devinfo nodes for this Connector.
*/
for (func = 0; func < max_function; func++) {
if ((function != PCICFG_ALL_FUNC) && (function != func))
continue;
if (max_function == PCICFG_MAX_ARI_FUNCTION)
trans_device = func >> 3; /* ARI Device */
else
trans_device = device;
if ((child_dip = pcicfg_devi_find(devi, trans_device, func & 7))
== NULL) {
DEBUG2("No device at %x,%x\n", trans_device, func & 7);
continue;
}
DEBUG2("Tearing down device [0x%x] function [0x%x]\n",
trans_device, func & 7);
if (pcicfg_is_ntbridge(child_dip) != DDI_FAILURE)
if (pcicfg_ntbridge_unconfigure(child_dip) !=
PCICFG_SUCCESS) {
cmn_err(CE_WARN,
"ntbridge: unconfigure failed\n");
goto fail;
}
if (pcicfg_teardown_device(child_dip, flags, is_pcie)
!= PCICFG_SUCCESS) {
DEBUG2("Failed to tear down device [0x%x]"
"function [0x%x]\n", trans_device, func & 7);
goto fail;
}
}
if (pcie_ari_is_enabled(devi) == PCIE_ARI_FORW_ENABLED) {
(void) ddi_prop_remove(DDI_DEV_T_NONE, devi, "ari-enabled");
(void) pcie_ari_disable(devi);
}
ndi_devi_exit(devi, circ);
return (PCICFG_SUCCESS);
fail:
ndi_devi_exit(devi, circ);
return (PCICFG_FAILURE);
}
static int
pcicfg_teardown_device(dev_info_t *dip, pcicfg_flags_t flags, boolean_t is_pcie)
{
ddi_acc_handle_t handle;
/*
* Free up resources associated with 'dip'
*/
if (pcicfg_free_resources(dip, flags) != PCICFG_SUCCESS) {
DEBUG0("Failed to free resources\n");
return (PCICFG_FAILURE);
}
/*
* disable the device
*/
if (pcicfg_config_setup(dip, &handle) != PCICFG_SUCCESS)
return (PCICFG_FAILURE);
pcicfg_device_off(handle);
pcicfg_config_teardown(&handle);
if (is_pcie) {
/*
* free pcie_bus_t for the sub-tree
*/
if (ddi_get_child(dip) != NULL)
pcie_fab_fini_bus(dip, PCIE_BUS_ALL);
pcie_fini_bus(dip, PCIE_BUS_ALL);
}
/*
* The framework provides this routine which can
* tear down a sub-tree.
*/
if (ndi_devi_offline(dip, NDI_DEVI_REMOVE) != NDI_SUCCESS) {
DEBUG0("Failed to offline and remove node\n");
return (PCICFG_FAILURE);
}
return (PCICFG_SUCCESS);
}
/*
* BEGIN GENERIC SUPPORT ROUTINES
*/
static pcicfg_phdl_t *
pcicfg_find_phdl(dev_info_t *dip)
{
pcicfg_phdl_t *entry;
mutex_enter(&pcicfg_list_mutex);
for (entry = pcicfg_phdl_list; entry != NULL; entry = entry->next) {
if (entry->dip == dip) {
mutex_exit(&pcicfg_list_mutex);
return (entry);
}
}
mutex_exit(&pcicfg_list_mutex);
/*
* Did'nt find entry - create one
*/
return (pcicfg_create_phdl(dip));
}
static pcicfg_phdl_t *
pcicfg_create_phdl(dev_info_t *dip)
{
pcicfg_phdl_t *new;
new = (pcicfg_phdl_t *)kmem_zalloc(sizeof (pcicfg_phdl_t), KM_SLEEP);
new->dip = dip;
mutex_enter(&pcicfg_list_mutex);
new->next = pcicfg_phdl_list;
pcicfg_phdl_list = new;
mutex_exit(&pcicfg_list_mutex);
return (new);
}
static int
pcicfg_destroy_phdl(dev_info_t *dip)
{
pcicfg_phdl_t *entry;
pcicfg_phdl_t *follow = NULL;
mutex_enter(&pcicfg_list_mutex);
for (entry = pcicfg_phdl_list; entry != NULL; follow = entry,
entry = entry->next) {
if (entry->dip == dip) {
if (entry == pcicfg_phdl_list) {
pcicfg_phdl_list = entry->next;
} else {
follow->next = entry->next;
}
/*
* If this entry has any allocated memory
* or IO space associated with it, that
* must be freed up.
*/
if (entry->memory_len > 0) {
(void) ndi_ra_free(ddi_get_parent(dip),
entry->memory_base, entry->memory_len,
NDI_RA_TYPE_MEM, NDI_RA_PASS);
}
pcicfg_free_hole(&entry->mem_hole);
if (entry->io_len > 0) {
(void) ndi_ra_free(ddi_get_parent(dip),
entry->io_base, entry->io_len,
NDI_RA_TYPE_IO, NDI_RA_PASS);
}
pcicfg_free_hole(&entry->io_hole);
if (entry->pf_memory_len > 0) {
(void) ndi_ra_free(ddi_get_parent(dip),
entry->pf_memory_base, entry->pf_memory_len,
NDI_RA_TYPE_PCI_PREFETCH_MEM, NDI_RA_PASS);
}
pcicfg_free_hole(&entry->pf_mem_hole);
/*
* Destroy this entry
*/
kmem_free((caddr_t)entry, sizeof (pcicfg_phdl_t));
mutex_exit(&pcicfg_list_mutex);
return (PCICFG_SUCCESS);
}
}
mutex_exit(&pcicfg_list_mutex);
/*
* Did'nt find the entry
*/
return (PCICFG_FAILURE);
}
static int
pcicfg_bridge_assign(dev_info_t *dip, void *hdl)
{
ddi_acc_handle_t handle;
pci_regspec_t *reg;
int length;
int rcount;
int i;
int offset;
uint64_t mem_answer;
uint32_t io_answer;
int count;
uint8_t header_type;
ppb_ranges_t range[PCICFG_RANGE_LEN];
int bus_range[2];
uint64_t mem_residual;
uint64_t pf_mem_residual;
uint64_t io_residual;
pcicfg_phdl_t *entry = (pcicfg_phdl_t *)hdl;
DEBUG1("bridge assign: assigning addresses to %s\n", ddi_get_name(dip));
entry->error = PCICFG_SUCCESS;
if (entry == NULL) {
DEBUG0("Failed to get entry\n");
entry->error = PCICFG_FAILURE;
return (DDI_WALK_TERMINATE);
}
if (pcicfg_config_setup(dip, &handle) != DDI_SUCCESS) {
DEBUG0("Failed to map config space!\n");
entry->error = PCICFG_FAILURE;
return (DDI_WALK_TERMINATE);
}
header_type = pci_config_get8(handle, PCI_CONF_HEADER);
if ((header_type & PCI_HEADER_TYPE_M) == PCI_HEADER_PPB) {
bzero((caddr_t)range, sizeof (ppb_ranges_t) * PCICFG_RANGE_LEN);
(void) pcicfg_setup_bridge(entry, handle);
range[0].child_high = range[0].parent_high |=
(PCI_REG_REL_M | PCI_ADDR_IO);
range[0].child_low = range[0].parent_low = entry->io_last;
range[1].child_high = range[1].parent_high |=
(PCI_REG_REL_M | PCI_ADDR_MEM32);
range[1].child_low = range[1].parent_low =
entry->memory_last;
range[2].child_high = range[2].parent_high |=
(PCI_REG_REL_M | PCI_ADDR_MEM32 | PCI_REG_PF_M);
range[2].child_low = range[2].parent_low =
entry->pf_memory_last;
ndi_devi_enter(dip, &count);
ddi_walk_devs(ddi_get_child(dip),
pcicfg_bridge_assign, (void *)entry);
ndi_devi_exit(dip, count);
(void) pcicfg_update_bridge(entry, handle);
bus_range[0] = pci_config_get8(handle, PCI_BCNF_SECBUS);
bus_range[1] = pci_config_get8(handle, PCI_BCNF_SUBBUS);
if (ndi_prop_update_int_array(DDI_DEV_T_NONE, dip,
"bus-range", bus_range, 2) != DDI_SUCCESS) {
DEBUG0("Failed to set bus-range property");
entry->error = PCICFG_FAILURE;
(void) pcicfg_config_teardown(&handle);
return (DDI_WALK_TERMINATE);
}
/*
* Put back memory and I/O space not allocated
* under the bridge.
*/
mem_residual = entry->memory_len -
(entry->memory_last - entry->memory_base);
if (mem_residual > 0) {
(void) ndi_ra_free(ddi_get_parent(dip),
entry->memory_last, mem_residual,
NDI_RA_TYPE_MEM, NDI_RA_PASS);
}
io_residual = entry->io_len - (entry->io_last - entry->io_base);
if (io_residual > 0) {
(void) ndi_ra_free(ddi_get_parent(dip), entry->io_last,
io_residual, NDI_RA_TYPE_IO, NDI_RA_PASS);
}
pf_mem_residual = entry->pf_memory_len -
(entry->pf_memory_last - entry->pf_memory_base);
if (pf_mem_residual > 0) {
(void) ndi_ra_free(ddi_get_parent(dip),
entry->pf_memory_last, pf_mem_residual,
NDI_RA_TYPE_PCI_PREFETCH_MEM, NDI_RA_PASS);
}
if (entry->io_len > 0) {
range[0].size_low = entry->io_last - entry->io_base;
if (pcicfg_update_ranges_prop(dip, &range[0])) {
DEBUG0("Failed to update ranges (i/o)\n");
entry->error = PCICFG_FAILURE;
(void) pcicfg_config_teardown(&handle);
return (DDI_WALK_TERMINATE);
}
}
if (entry->memory_len > 0) {
range[1].size_low =
entry->memory_last - entry->memory_base;
if (pcicfg_update_ranges_prop(dip, &range[1])) {
DEBUG0("Failed to update ranges (memory)\n");
entry->error = PCICFG_FAILURE;
(void) pcicfg_config_teardown(&handle);
return (DDI_WALK_TERMINATE);
}
}
if (entry->pf_memory_len > 0) {
range[2].size_low =
entry->pf_memory_last - entry->pf_memory_base;
if (pcicfg_update_ranges_prop(dip, &range[2])) {
DEBUG0("Failed to update ranges (PF memory)\n");
entry->error = PCICFG_FAILURE;
(void) pcicfg_config_teardown(&handle);
return (DDI_WALK_TERMINATE);
}
}
(void) pcicfg_device_on(handle);
PCICFG_DUMP_BRIDGE_CONFIG(handle);
(void) pcicfg_config_teardown(&handle);
return (DDI_WALK_PRUNECHILD);
}
/*
* If there is an interrupt pin set program
* interrupt line with default values.
*/
if (pci_config_get8(handle, PCI_CONF_IPIN)) {
pci_config_put8(handle, PCI_CONF_ILINE, 0xf);
}
/*
* A single device (under a bridge).
* For each "reg" property with a length, allocate memory
* and program the base registers.
*/
if (ddi_getlongprop(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, "reg",
(caddr_t)&reg, &length) != DDI_PROP_SUCCESS) {
DEBUG0("Failed to read reg property\n");
entry->error = PCICFG_FAILURE;
(void) pcicfg_config_teardown(&handle);
return (DDI_WALK_TERMINATE);
}
rcount = length / sizeof (pci_regspec_t);
offset = PCI_CONF_BASE0;
for (i = 0; i < rcount; i++) {
if ((reg[i].pci_size_low != 0) || (reg[i].pci_size_hi != 0)) {
offset = PCI_REG_REG_G(reg[i].pci_phys_hi);
switch (PCI_REG_ADDR_G(reg[i].pci_phys_hi)) {
case PCI_REG_ADDR_G(PCI_ADDR_MEM64):
if (reg[i].pci_phys_hi & PCI_REG_PF_M) {
/* allocate prefetchable memory */
pcicfg_get_pf_mem(entry,
reg[i].pci_size_low, &mem_answer);
} else { /* get non prefetchable memory */
pcicfg_get_mem(entry,
reg[i].pci_size_low, &mem_answer);
}
pci_config_put64(handle, offset, mem_answer);
DEBUG2("REGISTER off %x (64)LO ----> [0x%x]\n",
offset, pci_config_get32(handle, offset));
DEBUG2("REGISTER off %x (64)HI ----> [0x%x]\n",
offset + 4,
pci_config_get32(handle, offset + 4));
reg[i].pci_phys_hi |= PCI_REG_REL_M;
reg[i].pci_phys_low = PCICFG_LOADDR(mem_answer);
reg[i].pci_phys_mid = PCICFG_HIADDR(mem_answer);
break;
case PCI_REG_ADDR_G(PCI_ADDR_MEM32):
if (reg[i].pci_phys_hi & PCI_REG_PF_M) {
/* allocate prefetchable memory */
pcicfg_get_pf_mem(entry,
reg[i].pci_size_low, &mem_answer);
} else {
/* get non prefetchable memory */
pcicfg_get_mem(entry,
reg[i].pci_size_low, &mem_answer);
}
pci_config_put32(handle, offset,
(uint32_t)mem_answer);
DEBUG2("REGISTER off %x(32)LO ----> [0x%x]\n",
offset, pci_config_get32(handle, offset));
reg[i].pci_phys_hi |= PCI_REG_REL_M;
reg[i].pci_phys_low = (uint32_t)mem_answer;
break;
case PCI_REG_ADDR_G(PCI_ADDR_IO):
/* allocate I/O space from the allocator */
(void) pcicfg_get_io(entry, reg[i].pci_size_low,
&io_answer);
pci_config_put32(handle, offset, io_answer);
DEBUG2("REGISTER off %x (I/O)LO ----> [0x%x]\n",
offset, pci_config_get32(handle, offset));
reg[i].pci_phys_hi |= PCI_REG_REL_M;
reg[i].pci_phys_low = io_answer;
break;
default:
DEBUG0("Unknown register type\n");
kmem_free(reg, length);
(void) pcicfg_config_teardown(&handle);
entry->error = PCICFG_FAILURE;
return (DDI_WALK_TERMINATE);
} /* switch */
/*
* Now that memory locations are assigned,
* update the assigned address property.
*/
if (pcicfg_update_assigned_prop(dip, &reg[i])
!= PCICFG_SUCCESS) {
kmem_free(reg, length);
(void) pcicfg_config_teardown(&handle);
entry->error = PCICFG_FAILURE;
return (DDI_WALK_TERMINATE);
}
}
}
(void) pcicfg_device_on(handle);
PCICFG_DUMP_DEVICE_CONFIG(handle);
(void) pcicfg_config_teardown(&handle);
kmem_free((caddr_t)reg, length);
return (DDI_WALK_CONTINUE);
}
static int
pcicfg_device_assign(dev_info_t *dip)
{
ddi_acc_handle_t handle;
pci_regspec_t *reg;
int length;
int rcount;
int i;
int offset;
ndi_ra_request_t request;
uint64_t answer;
uint64_t alen;
DEBUG1("%llx now under configuration\n", dip);
/* request.ra_len = PCICFG_ROUND_UP(request.ra_len, PCICFG_IOGRAN); */
if (pcicfg_ntbridge_child(dip) == DDI_SUCCESS) {
return (pcicfg_ntbridge_program_child(dip));
}
/*
* XXX Failure here should be noted
*/
if (ddi_getlongprop(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, "reg",
(caddr_t)&reg, &length) != DDI_PROP_SUCCESS) {
DEBUG0("Failed to read reg property\n");
return (PCICFG_FAILURE);
}
if (pcicfg_config_setup(dip, &handle) != DDI_SUCCESS) {
DEBUG0("Failed to map config space!\n");
kmem_free(reg, length);
return (PCICFG_FAILURE);
}
/*
* A single device
*
* For each "reg" property with a length, allocate memory
* and program the base registers.
*/
/*
* If there is an interrupt pin set program
* interrupt line with default values.
*/
if (pci_config_get8(handle, PCI_CONF_IPIN)) {
pci_config_put8(handle, PCI_CONF_ILINE, 0xf);
}
bzero((caddr_t)&request, sizeof (ndi_ra_request_t));
/*
* Note: Both non-prefetchable and prefetchable memory space
* allocations are made within 32bit space. Currently, BIOSs
* allocate device memory for PCI devices within the 32bit space
* so this will not be a problem.
*/
request.ra_flags |= NDI_RA_ALIGN_SIZE | NDI_RA_ALLOC_BOUNDED;
request.ra_boundbase = 0;
request.ra_boundlen = PCICFG_4GIG_LIMIT;
rcount = length / sizeof (pci_regspec_t);
offset = PCI_CONF_BASE0;
for (i = 0; i < rcount; i++) {
char *mem_type;
if ((reg[i].pci_size_low != 0)|| (reg[i].pci_size_hi != 0)) {
offset = PCI_REG_REG_G(reg[i].pci_phys_hi);
request.ra_len = reg[i].pci_size_low;
switch (PCI_REG_ADDR_G(reg[i].pci_phys_hi)) {
case PCI_REG_ADDR_G(PCI_ADDR_MEM64):
if (reg[i].pci_phys_hi & PCI_REG_PF_M) {
mem_type = NDI_RA_TYPE_PCI_PREFETCH_MEM;
} else {
mem_type = NDI_RA_TYPE_MEM;
}
/* allocate memory space from the allocator */
if (ndi_ra_alloc(ddi_get_parent(dip), &request,
&answer, &alen, mem_type, NDI_RA_PASS)
!= NDI_SUCCESS) {
DEBUG0("Failed to allocate 64b mem\n");
kmem_free(reg, length);
(void) pcicfg_config_teardown(&handle);
return (PCICFG_NORESRC);
}
DEBUG3("64 addr = [0x%x.0x%x] len [0x%x]\n",
PCICFG_HIADDR(answer),
PCICFG_LOADDR(answer), alen);
/* program the low word */
pci_config_put32(handle, offset,
PCICFG_LOADDR(answer));
/* program the high word */
pci_config_put32(handle, offset + 4,
PCICFG_HIADDR(answer));
reg[i].pci_phys_hi |= PCI_REG_REL_M;
reg[i].pci_phys_low = PCICFG_LOADDR(answer);
reg[i].pci_phys_mid = PCICFG_HIADDR(answer);
/*
* currently support 32b address space
* assignments only.
*/
reg[i].pci_phys_hi ^=
PCI_ADDR_MEM64 ^ PCI_ADDR_MEM32;
offset += 8;
break;
case PCI_REG_ADDR_G(PCI_ADDR_MEM32):
if (reg[i].pci_phys_hi & PCI_REG_PF_M)
mem_type = NDI_RA_TYPE_PCI_PREFETCH_MEM;
else
mem_type = NDI_RA_TYPE_MEM;
/* allocate memory space from the allocator */
if (ndi_ra_alloc(ddi_get_parent(dip), &request,
&answer, &alen, mem_type, NDI_RA_PASS)
!= NDI_SUCCESS) {
DEBUG0("Failed to allocate 32b mem\n");
kmem_free(reg, length);
(void) pcicfg_config_teardown(&handle);
return (PCICFG_NORESRC);
}
DEBUG3("32 addr = [0x%x.0x%x] len [0x%x]\n",
PCICFG_HIADDR(answer),
PCICFG_LOADDR(answer),
alen);
/* program the low word */
pci_config_put32(handle, offset,
PCICFG_LOADDR(answer));
reg[i].pci_phys_hi |= PCI_REG_REL_M;
reg[i].pci_phys_low = PCICFG_LOADDR(answer);
reg[i].pci_phys_mid = 0;
offset += 4;
break;
case PCI_REG_ADDR_G(PCI_ADDR_IO):
/*
* Try to allocate I/O space. If it fails,
* continue here instead of returning failure
* so that the hotplug for drivers that don't
* use I/O space can succeed, For drivers
* that need to use I/O space, the hotplug
* will still fail later during driver attach.
*/
if (ndi_ra_alloc(ddi_get_parent(dip), &request,
&answer, &alen, NDI_RA_TYPE_IO, NDI_RA_PASS)
!= NDI_SUCCESS) {
DEBUG0("Failed to allocate I/O\n");
continue;
}
DEBUG3("I/O addr = [0x%x.0x%x] len [0x%x]\n",
PCICFG_HIADDR(answer),
PCICFG_LOADDR(answer), alen);
pci_config_put32(handle, offset,
PCICFG_LOADDR(answer));
reg[i].pci_phys_hi |= PCI_REG_REL_M;
reg[i].pci_phys_low = PCICFG_LOADDR(answer);
offset += 4;
break;
default:
DEBUG0("Unknown register type\n");
kmem_free(reg, length);
(void) pcicfg_config_teardown(&handle);
return (PCICFG_FAILURE);
} /* switch */
/*
* Now that memory locations are assigned,
* update the assigned address property.
*/
if (pcicfg_update_assigned_prop(dip, &reg[i])
!= PCICFG_SUCCESS) {
kmem_free(reg, length);
(void) pcicfg_config_teardown(&handle);
return (PCICFG_FAILURE);
}
}
}
(void) pcicfg_device_on(handle);
kmem_free(reg, length);
PCICFG_DUMP_DEVICE_CONFIG(handle);
(void) pcicfg_config_teardown(&handle);
return (PCICFG_SUCCESS);
}
static int
pcicfg_device_assign_readonly(dev_info_t *dip)
{
ddi_acc_handle_t handle;
pci_regspec_t *assigned;
int length;
int acount;
int i;
ndi_ra_request_t request;
uint64_t answer;
uint64_t alen;
DEBUG1("%llx now under configuration\n", dip);
/*
* we don't support ntbridges for readonly probe.
*/
if (pcicfg_ntbridge_child(dip) == DDI_SUCCESS) {
return (PCICFG_FAILURE);
}
if (ddi_getlongprop(DDI_DEV_T_ANY, dip,
DDI_PROP_DONTPASS, "assigned-addresses", (caddr_t)&assigned,
&length) != DDI_PROP_SUCCESS) {
DEBUG0("Failed to read assigned-addresses property\n");
return (PCICFG_FAILURE);
}
if (pcicfg_config_setup(dip, &handle) != DDI_SUCCESS) {
DEBUG0("Failed to map config space!\n");
kmem_free(assigned, length);
return (PCICFG_FAILURE);
}
/*
* If there is an interrupt pin set program
* interrupt line with default values.
*/
if (pci_config_get8(handle, PCI_CONF_IPIN)) {
pci_config_put8(handle, PCI_CONF_ILINE, 0xf);
}
/*
* Note: Both non-prefetchable and prefetchable memory space
* allocations are made within 32bit space. Currently, BIOSs
* allocate device memory for PCI devices within the 32bit space
* so this will not be a problem.
*/
bzero((caddr_t)&request, sizeof (ndi_ra_request_t));
request.ra_flags = NDI_RA_ALLOC_SPECIFIED; /* specified addr */
request.ra_boundbase = 0;
request.ra_boundlen = PCICFG_4GIG_LIMIT;
acount = length / sizeof (pci_regspec_t);
for (i = 0; i < acount; i++) {
char *mem_type;
if ((assigned[i].pci_size_low != 0)||
(assigned[i].pci_size_hi != 0)) {
request.ra_len = assigned[i].pci_size_low;
switch (PCI_REG_ADDR_G(assigned[i].pci_phys_hi)) {
case PCI_REG_ADDR_G(PCI_ADDR_MEM64):
request.ra_addr = (uint64_t)PCICFG_LADDR(
assigned[i].pci_phys_low,
assigned[i].pci_phys_mid);
if (assigned[i].pci_phys_hi & PCI_REG_PF_M) {
mem_type = NDI_RA_TYPE_PCI_PREFETCH_MEM;
} else {
mem_type = NDI_RA_TYPE_MEM;
}
/* allocate memory space from the allocator */
if (ndi_ra_alloc(ddi_get_parent(dip), &request,
&answer, &alen, mem_type, NDI_RA_PASS)
!= NDI_SUCCESS) {
DEBUG0("Failed to allocate 64b mem\n");
kmem_free(assigned, length);
return (PCICFG_NORESRC);
}
break;
case PCI_REG_ADDR_G(PCI_ADDR_MEM32):
request.ra_addr = (uint64_t)
assigned[i].pci_phys_low;
if (assigned[i].pci_phys_hi & PCI_REG_PF_M)
mem_type = NDI_RA_TYPE_PCI_PREFETCH_MEM;
else
mem_type = NDI_RA_TYPE_MEM;
/* allocate memory space from the allocator */
if (ndi_ra_alloc(ddi_get_parent(dip), &request,
&answer, &alen, mem_type, NDI_RA_PASS)
!= NDI_SUCCESS) {
DEBUG0("Failed to allocate 32b mem\n");
kmem_free(assigned, length);
return (PCICFG_NORESRC);
}
break;
case PCI_REG_ADDR_G(PCI_ADDR_IO):
request.ra_addr = (uint64_t)
assigned[i].pci_phys_low;
/* allocate I/O space from the allocator */
if (ndi_ra_alloc(ddi_get_parent(dip), &request,
&answer, &alen, NDI_RA_TYPE_IO, NDI_RA_PASS)
!= NDI_SUCCESS) {
DEBUG0("Failed to allocate I/O\n");
kmem_free(assigned, length);
return (PCICFG_NORESRC);
}
break;
default:
DEBUG0("Unknown register type\n");
kmem_free(assigned, length);
return (PCICFG_FAILURE);
} /* switch */
}
}
(void) pcicfg_device_on(handle);
kmem_free(assigned, length);
PCICFG_DUMP_DEVICE_CONFIG(handle);
(void) pcicfg_config_teardown(&handle);
return (PCICFG_SUCCESS);
}
#ifdef DEBUG
/*
* This function is useful in debug mode, where we can measure how
* much memory was wasted/unallocated in bridge device's domain.
*/
static uint64_t
pcicfg_unused_space(hole_t *hole, uint32_t *hole_count)
{
uint64_t len = 0;
uint32_t count = 0;
do {
len += hole->len;
hole = hole->next;
count++;
} while (hole);
*hole_count = count;
return (len);
}
#endif
/*
* This function frees data structures that hold the hole information
* which are allocated in pcicfg_alloc_hole(). This is not freeing
* any memory allocated through NDI calls.
*/
static void
pcicfg_free_hole(hole_t *addr_hole)
{
hole_t *nhole, *hole = addr_hole->next;
while (hole) {
nhole = hole->next;
kmem_free(hole, sizeof (hole_t));
hole = nhole;
}
}
static uint64_t
pcicfg_alloc_hole(hole_t *addr_hole, uint64_t *alast, uint32_t length)
{
uint64_t actual_hole_start, ostart, olen;
hole_t *hole = addr_hole, *thole, *nhole;
do {
actual_hole_start = PCICFG_ROUND_UP(hole->start, length);
if (((actual_hole_start - hole->start) + length) <= hole->len) {
DEBUG3("hole found. start %llx, len %llx, req=0x%x\n",
hole->start, hole->len, length);
ostart = hole->start;
olen = hole->len;
/* current hole parameters adjust */
if ((actual_hole_start - hole->start) == 0) {
hole->start += length;
hole->len -= length;
if (hole->start > *alast)
*alast = hole->start;
} else {
hole->len = actual_hole_start - hole->start;
nhole = (hole_t *)kmem_zalloc(sizeof (hole_t),
KM_SLEEP);
nhole->start = actual_hole_start + length;
nhole->len = (ostart + olen) - nhole->start;
nhole->next = NULL;
thole = hole->next;
hole->next = nhole;
nhole->next = thole;
if (nhole->start > *alast)
*alast = nhole->start;
DEBUG2("put new hole to %llx, %llx\n",
nhole->start, nhole->len);
}
DEBUG2("adjust current hole to %llx, %llx\n",
hole->start, hole->len);
break;
}
actual_hole_start = 0;
hole = hole->next;
} while (hole);
DEBUG1("return hole at %llx\n", actual_hole_start);
return (actual_hole_start);
}
static void
pcicfg_get_mem(pcicfg_phdl_t *entry, uint32_t length, uint64_t *ans)
{
uint64_t new_mem;
/* See if there is a hole, that can hold this request. */
new_mem = pcicfg_alloc_hole(&entry->mem_hole, &entry->memory_last,
length);
if (new_mem) { /* if non-zero, found a hole. */
if (ans != NULL)
*ans = new_mem;
} else
cmn_err(CE_WARN, "No %u bytes memory window for %s\n",
length, ddi_get_name(entry->dip));
}
static void
pcicfg_get_io(pcicfg_phdl_t *entry,
uint32_t length, uint32_t *ans)
{
uint32_t new_io;
uint64_t io_last;
/*
* See if there is a hole, that can hold this request.
* Pass 64 bit parameters and then truncate to 32 bit.
*/
io_last = entry->io_last;
new_io = (uint32_t)pcicfg_alloc_hole(&entry->io_hole, &io_last, length);
if (new_io) { /* if non-zero, found a hole. */
entry->io_last = (uint32_t)io_last;
if (ans != NULL)
*ans = new_io;
} else
cmn_err(CE_WARN, "No %u bytes IO space window for %s\n",
length, ddi_get_name(entry->dip));
}
static void
pcicfg_get_pf_mem(pcicfg_phdl_t *entry, uint32_t length, uint64_t *ans)
{
uint64_t new_mem;
/* See if there is a hole, that can hold this request. */
new_mem = pcicfg_alloc_hole(&entry->pf_mem_hole, &entry->pf_memory_last,
length);
if (new_mem) { /* if non-zero, found a hole. */
if (ans != NULL)
*ans = new_mem;
} else
cmn_err(CE_WARN, "No %u bytes PF memory window for %s\n",
length, ddi_get_name(entry->dip));
}
static int
pcicfg_sum_resources(dev_info_t *dip, void *hdl)
{
pcicfg_phdl_t *entry = (pcicfg_phdl_t *)hdl;
pci_regspec_t *pci_rp;
int length;
int rcount;
int i;
ndi_ra_request_t *pf_mem_request;
ndi_ra_request_t *mem_request;
ndi_ra_request_t *io_request;
uint8_t header_type;
ddi_acc_handle_t handle;
entry->error = PCICFG_SUCCESS;
pf_mem_request = &entry->pf_mem_req;
mem_request = &entry->mem_req;
io_request = &entry->io_req;
if (pcicfg_config_setup(dip, &handle) != DDI_SUCCESS) {
DEBUG0("Failed to map config space!\n");
entry->error = PCICFG_FAILURE;
return (DDI_WALK_TERMINATE);
}
header_type = pci_config_get8(handle, PCI_CONF_HEADER);
/*
* If its a bridge - just record the highest bus seen
*/
if ((header_type & PCI_HEADER_TYPE_M) == PCI_HEADER_PPB) {
if (entry->highest_bus < pci_config_get8(handle,
PCI_BCNF_SECBUS)) {
entry->highest_bus =
pci_config_get8(handle, PCI_BCNF_SECBUS);
}
(void) pcicfg_config_teardown(&handle);
entry->error = PCICFG_FAILURE;
return (DDI_WALK_CONTINUE);
} else {
if (ddi_getlongprop(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS,
"reg", (caddr_t)&pci_rp, &length) != DDI_PROP_SUCCESS) {
/*
* If one node in (the subtree of nodes)
* doesn't have a "reg" property fail the
* allocation.
*/
entry->memory_len = 0;
entry->io_len = 0;
entry->pf_memory_len = 0;
entry->error = PCICFG_FAILURE;
(void) pcicfg_config_teardown(&handle);
return (DDI_WALK_TERMINATE);
}
/*
* For each "reg" property with a length, add that to the
* total memory (or I/O) to allocate.
*/
rcount = length / sizeof (pci_regspec_t);
for (i = 0; i < rcount; i++) {
switch (PCI_REG_ADDR_G(pci_rp[i].pci_phys_hi)) {
case PCI_REG_ADDR_G(PCI_ADDR_MEM32):
if (pci_rp[i].pci_phys_hi & PCI_REG_PF_M) {
pf_mem_request->ra_len =
pci_rp[i].pci_size_low +
PCICFG_ROUND_UP(
pf_mem_request->ra_len,
pci_rp[i].pci_size_low);
DEBUG1("ADDING 32 --->0x%x\n",
pci_rp[i].pci_size_low);
} else {
mem_request->ra_len =
pci_rp[i].pci_size_low +
PCICFG_ROUND_UP(mem_request->ra_len,
pci_rp[i].pci_size_low);
DEBUG1("ADDING 32 --->0x%x\n",
pci_rp[i].pci_size_low);
}
break;
case PCI_REG_ADDR_G(PCI_ADDR_MEM64):
if (pci_rp[i].pci_phys_hi & PCI_REG_PF_M) {
pf_mem_request->ra_len =
pci_rp[i].pci_size_low +
PCICFG_ROUND_UP(
pf_mem_request->ra_len,
pci_rp[i].pci_size_low);
DEBUG1("ADDING 64 --->0x%x\n",
pci_rp[i].pci_size_low);
} else {
mem_request->ra_len =
pci_rp[i].pci_size_low +
PCICFG_ROUND_UP(mem_request->ra_len,
pci_rp[i].pci_size_low);
DEBUG1("ADDING 64 --->0x%x\n",
pci_rp[i].pci_size_low);
}
break;
case PCI_REG_ADDR_G(PCI_ADDR_IO):
io_request->ra_len =
pci_rp[i].pci_size_low +
PCICFG_ROUND_UP(io_request->ra_len,
pci_rp[i].pci_size_low);
DEBUG1("ADDING I/O --->0x%x\n",
pci_rp[i].pci_size_low);
break;
default:
/* Config space register - not included */
break;
}
}
/*
* free the memory allocated by ddi_getlongprop
*/
kmem_free(pci_rp, length);
/*
* continue the walk to the next sibling to sum memory
*/
(void) pcicfg_config_teardown(&handle);
return (DDI_WALK_CONTINUE);
}
}
static int
pcicfg_free_bridge_resources(dev_info_t *dip)
{
ppb_ranges_t *ranges;
uint_t *bus;
int k;
int length = 0;
int i;
if ((i = ddi_getlongprop(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS,
"ranges", (caddr_t)&ranges, &length)) != DDI_PROP_SUCCESS) {
DEBUG0("Failed to read ranges property\n");
if (ddi_get_child(dip)) {
cmn_err(CE_WARN, "No ranges property found for %s",
ddi_get_name(dip));
/*
* strictly speaking, we can check for children with
* assigned-addresses but for now it is better to
* be conservative and assume that if there are child
* nodes, then they do consume PCI memory or IO
* resources, Hence return failure.
*/
return (PCICFG_FAILURE);
}
length = 0;
}
for (i = 0; i < length / sizeof (ppb_ranges_t); i++) {
char *mem_type;
if (ranges[i].size_low != 0 || ranges[i].size_high != 0) {
switch (ranges[i].parent_high & PCI_REG_ADDR_M) {
case PCI_ADDR_IO:
DEBUG2("Free I/O base/length = "
"[0x%x]/[0x%x]\n", ranges[i].child_low,
ranges[i].size_low);
if (ndi_ra_free(ddi_get_parent(dip),
(uint64_t)ranges[i].child_low,
(uint64_t)ranges[i].size_low,
NDI_RA_TYPE_IO, NDI_RA_PASS)
!= NDI_SUCCESS) {
DEBUG0("Trouble freeing "
"PCI i/o space\n");
kmem_free(ranges, length);
return (PCICFG_FAILURE);
}
break;
case PCI_ADDR_MEM32:
case PCI_ADDR_MEM64:
if (ranges[i].parent_high & PCI_REG_PF_M) {
DEBUG3("Free PF Memory base/length = "
"[0x%x.0x%x]/[0x%x]\n",
ranges[i].child_mid,
ranges[i].child_low,
ranges[i].size_low);
mem_type = NDI_RA_TYPE_PCI_PREFETCH_MEM;
} else {
DEBUG3("Free Memory base/length"
" = [0x%x.0x%x]/[0x%x]\n",
ranges[i].child_mid,
ranges[i].child_low,
ranges[i].size_low)
mem_type = NDI_RA_TYPE_MEM;
}
if (ndi_ra_free(ddi_get_parent(dip),
PCICFG_LADDR(ranges[i].child_low,
ranges[i].child_mid),
(uint64_t)ranges[i].size_low,
mem_type, NDI_RA_PASS) != NDI_SUCCESS) {
DEBUG0("Trouble freeing "
"PCI memory space\n");
kmem_free(ranges, length);
return (PCICFG_FAILURE);
}
break;
default:
DEBUG0("Unknown memory space\n");
break;
}
}
}
if (length)
kmem_free(ranges, length);
if (ddi_getlongprop(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS,
"bus-range", (caddr_t)&bus, &k) != DDI_PROP_SUCCESS) {
DEBUG0("Failed to read bus-range property\n");
return (PCICFG_FAILURE);
}
DEBUG2("Need to free bus [%d] range [%d]\n",
bus[0], bus[1] - bus[0] + 1);
if (ndi_ra_free(ddi_get_parent(dip), (uint64_t)bus[0],
(uint64_t)(bus[1] - bus[0] + 1), NDI_RA_TYPE_PCI_BUSNUM,
NDI_RA_PASS) != NDI_SUCCESS) {
DEBUG0("Failed to free a bus number\n");
kmem_free(bus, k);
return (PCICFG_FAILURE);
}
kmem_free(bus, k);
return (PCICFG_SUCCESS);
}
static int
pcicfg_free_device_resources(dev_info_t *dip)
{
pci_regspec_t *assigned;
int length;
int acount;
int i;
if (ddi_getlongprop(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS,
"assigned-addresses", (caddr_t)&assigned, &length)
!= DDI_PROP_SUCCESS) {
DEBUG0("Failed to read assigned-addresses property\n");
return (PCICFG_FAILURE);
}
/*
* For each "assigned-addresses" property entry with a length,
* call the memory allocation routines to return the
* resource.
*/
acount = length / sizeof (pci_regspec_t);
for (i = 0; i < acount; i++) {
char *mem_type;
/*
* Free the resource if the size of it is not zero.
*/
if ((assigned[i].pci_size_low != 0)||
(assigned[i].pci_size_hi != 0)) {
switch (PCI_REG_ADDR_G(assigned[i].pci_phys_hi)) {
case PCI_REG_ADDR_G(PCI_ADDR_MEM32):
/*
* Check the assigned address for zero.
* (Workaround for Devconf (x86) bug to
* skip bogus entry for ROM base address
* register. If the assigned address is
* zero then ignore the entry
* (see bugid 4281306)).
*/
if (assigned[i].pci_phys_low == 0)
break; /* ignore the entry */
if (assigned[i].pci_phys_hi & PCI_REG_PF_M)
mem_type = NDI_RA_TYPE_PCI_PREFETCH_MEM;
else
mem_type = NDI_RA_TYPE_MEM;
if (ndi_ra_free(ddi_get_parent(dip),
(uint64_t)assigned[i].pci_phys_low,
(uint64_t)assigned[i].pci_size_low,
mem_type, NDI_RA_PASS) != NDI_SUCCESS) {
DEBUG0("Trouble freeing "
"PCI memory space\n");
kmem_free(assigned, length);
return (PCICFG_FAILURE);
}
DEBUG4("Returned 0x%x of 32 bit %s space"
" @ 0x%x from register 0x%x\n",
assigned[i].pci_size_low, mem_type,
assigned[i].pci_phys_low,
PCI_REG_REG_G(assigned[i].pci_phys_hi));
break;
case PCI_REG_ADDR_G(PCI_ADDR_MEM64):
if (assigned[i].pci_phys_hi & PCI_REG_PF_M)
mem_type = NDI_RA_TYPE_PCI_PREFETCH_MEM;
else
mem_type = NDI_RA_TYPE_MEM;
if (ndi_ra_free(ddi_get_parent(dip),
PCICFG_LADDR(assigned[i].pci_phys_low,
assigned[i].pci_phys_mid),
(uint64_t)assigned[i].pci_size_low,
mem_type, NDI_RA_PASS) != NDI_SUCCESS) {
DEBUG0("Trouble freeing "
"PCI memory space\n");
kmem_free(assigned, length);
return (PCICFG_FAILURE);
}
DEBUG5("Returned 0x%x of 64 bit %s space"
" @ 0x%x.0x%x from register 0x%x\n",
assigned[i].pci_size_low,
mem_type, assigned[i].pci_phys_mid,
assigned[i].pci_phys_low,
PCI_REG_REG_G(assigned[i].pci_phys_hi));
break;
case PCI_REG_ADDR_G(PCI_ADDR_IO):
if (ndi_ra_free(ddi_get_parent(dip),
(uint64_t)assigned[i].pci_phys_low,
(uint64_t)assigned[i].pci_size_low,
NDI_RA_TYPE_IO, NDI_RA_PASS) !=
NDI_SUCCESS) {
DEBUG0("Trouble freeing "
"PCI IO space\n");
kmem_free(assigned, length);
return (PCICFG_FAILURE);
}
DEBUG3("Returned 0x%x of IO space @ 0x%x from "
"register 0x%x\n", assigned[i].pci_size_low,
assigned[i].pci_phys_low,
PCI_REG_REG_G(assigned[i].pci_phys_hi));
break;
default:
DEBUG0("Unknown register type\n");
kmem_free(assigned, length);
return (PCICFG_FAILURE);
} /* switch */
}
}
kmem_free(assigned, length);
return (PCICFG_SUCCESS);
}
static int
pcicfg_free_resources(dev_info_t *dip, pcicfg_flags_t flags)
{
ddi_acc_handle_t handle;
uint8_t header_type;
if (pci_config_setup(dip, &handle) != DDI_SUCCESS) {
DEBUG0("Failed to map config space!\n");
return (PCICFG_FAILURE);
}
header_type = pci_config_get8(handle, PCI_CONF_HEADER);
(void) pci_config_teardown(&handle);
/*
* A different algorithm is used for bridges and leaf devices.
*/
if ((header_type & PCI_HEADER_TYPE_M) == PCI_HEADER_PPB) {
/*
* We only support readonly probing for leaf devices.
*/
if (flags & PCICFG_FLAG_READ_ONLY)
return (PCICFG_FAILURE);
if (pcicfg_free_bridge_resources(dip) != PCICFG_SUCCESS) {
DEBUG0("Failed freeing up bridge resources\n");
return (PCICFG_FAILURE);
}
} else {
if (pcicfg_free_device_resources(dip) != PCICFG_SUCCESS) {
DEBUG0("Failed freeing up device resources\n");
return (PCICFG_FAILURE);
}
}
return (PCICFG_SUCCESS);
}
#ifndef _DONT_USE_1275_GENERIC_NAMES
static char *
pcicfg_get_class_name(uint32_t classcode)
{
struct pcicfg_name_entry *ptr;
for (ptr = &pcicfg_class_lookup[0]; ptr->name != NULL; ptr++) {
if (ptr->class_code == classcode) {
return (ptr->name);
}
}
return (NULL);
}
#endif /* _DONT_USE_1275_GENERIC_NAMES */
static dev_info_t *
pcicfg_devi_find(dev_info_t *dip, uint_t device, uint_t function)
{
struct pcicfg_find_ctrl ctrl;
int count;
ctrl.device = device;
ctrl.function = function;
ctrl.dip = NULL;
ndi_devi_enter(dip, &count);
ddi_walk_devs(ddi_get_child(dip), pcicfg_match_dev, (void *)&ctrl);
ndi_devi_exit(dip, count);
return (ctrl.dip);
}
static int
pcicfg_match_dev(dev_info_t *dip, void *hdl)
{
struct pcicfg_find_ctrl *ctrl = (struct pcicfg_find_ctrl *)hdl;
pci_regspec_t *pci_rp;
int length;
int pci_dev;
int pci_func;
if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS,
"reg", (int **)&pci_rp, (uint_t *)&length) != DDI_PROP_SUCCESS) {
ctrl->dip = NULL;
return (DDI_WALK_TERMINATE);
}
/* get the PCI device address info */
pci_dev = PCI_REG_DEV_G(pci_rp->pci_phys_hi);
pci_func = PCI_REG_FUNC_G(pci_rp->pci_phys_hi);
/*
* free the memory allocated by ddi_prop_lookup_int_array
*/
ddi_prop_free(pci_rp);
if ((pci_dev == ctrl->device) && (pci_func == ctrl->function)) {
/* found the match for the specified device address */
ctrl->dip = dip;
return (DDI_WALK_TERMINATE);
}
/*
* continue the walk to the next sibling to look for a match.
*/
return (DDI_WALK_PRUNECHILD);
}
static int
pcicfg_update_assigned_prop(dev_info_t *dip, pci_regspec_t *newone)
{
int alen;
pci_regspec_t *assigned;
caddr_t newreg;
uint_t status;
status = ddi_getlongprop(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS,
"assigned-addresses", (caddr_t)&assigned, &alen);
switch (status) {
case DDI_PROP_SUCCESS:
break;
case DDI_PROP_NO_MEMORY:
DEBUG0("no memory for assigned-addresses property\n");
return (PCICFG_FAILURE);
default:
(void) ndi_prop_update_int_array(DDI_DEV_T_NONE, dip,
"assigned-addresses", (int *)newone,
sizeof (*newone)/sizeof (int));
return (PCICFG_SUCCESS);
}
/*
* Allocate memory for the existing
* assigned-addresses(s) plus one and then
* build it.
*/
newreg = kmem_zalloc(alen+sizeof (*newone), KM_SLEEP);
bcopy(assigned, newreg, alen);
bcopy(newone, newreg + alen, sizeof (*newone));
/*
* Write out the new "assigned-addresses" spec
*/
(void) ndi_prop_update_int_array(DDI_DEV_T_NONE, dip,
"assigned-addresses", (int *)newreg,
(alen + sizeof (*newone))/sizeof (int));
kmem_free((caddr_t)newreg, alen+sizeof (*newone));
kmem_free(assigned, alen);
return (PCICFG_SUCCESS);
}
static int
pcicfg_update_ranges_prop(dev_info_t *dip, ppb_ranges_t *addition)
{
int rlen;
ppb_ranges_t *ranges;
caddr_t newreg;
uint_t status;
status = ddi_getlongprop(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS,
"ranges", (caddr_t)&ranges, &rlen);
switch (status) {
case DDI_PROP_SUCCESS:
break;
case DDI_PROP_NO_MEMORY:
DEBUG0("ranges present, but unable to get memory\n");
return (PCICFG_FAILURE);
default:
DEBUG0("no ranges property - creating one\n");
if (ndi_prop_update_int_array(DDI_DEV_T_NONE,
dip, "ranges", (int *)addition,
sizeof (ppb_ranges_t)/sizeof (int))
!= DDI_SUCCESS) {
DEBUG0("Did'nt create ranges property\n");
return (PCICFG_FAILURE);
}
return (PCICFG_SUCCESS);
}
/*
* Allocate memory for the existing ranges plus one and then
* build it.
*/
newreg = kmem_zalloc(rlen+sizeof (ppb_ranges_t), KM_SLEEP);
bcopy(ranges, newreg, rlen);
bcopy(addition, newreg + rlen, sizeof (ppb_ranges_t));
/*
* Write out the new "ranges" property
*/
(void) ndi_prop_update_int_array(DDI_DEV_T_NONE, dip, "ranges",
(int *)newreg, (rlen + sizeof (ppb_ranges_t))/sizeof (int));
DEBUG1("Updating ranges property for %d entries",
rlen / sizeof (ppb_ranges_t) + 1);
kmem_free((caddr_t)newreg, rlen+sizeof (ppb_ranges_t));
kmem_free((caddr_t)ranges, rlen);
return (PCICFG_SUCCESS);
}
static int
pcicfg_update_reg_prop(dev_info_t *dip, uint32_t regvalue, uint_t reg_offset)
{
int rlen;
pci_regspec_t *reg;
caddr_t newreg;
uint32_t hiword;
pci_regspec_t addition;
uint32_t size;
uint_t status;
status = ddi_getlongprop(DDI_DEV_T_ANY,
dip, DDI_PROP_DONTPASS, "reg", (caddr_t)&reg, &rlen);
switch (status) {
case DDI_PROP_SUCCESS:
break;
case DDI_PROP_NO_MEMORY:
DEBUG0("reg present, but unable to get memory\n");
return (PCICFG_FAILURE);
default:
DEBUG0("no reg property\n");
return (PCICFG_FAILURE);
}
/*
* Allocate memory for the existing reg(s) plus one and then
* build it.
*/
newreg = kmem_zalloc(rlen+sizeof (pci_regspec_t), KM_SLEEP);
/*
* Build the regspec, then add it to the existing one(s)
*/
hiword = PCICFG_MAKE_REG_HIGH(PCI_REG_BUS_G(reg->pci_phys_hi),
PCI_REG_DEV_G(reg->pci_phys_hi),
PCI_REG_FUNC_G(reg->pci_phys_hi), reg_offset);
if (reg_offset == PCI_CONF_ROM) {
size = (~(PCI_BASE_ROM_ADDR_M & regvalue))+1;
hiword |= PCI_ADDR_MEM32;
} else {
size = (~(PCI_BASE_M_ADDR_M & regvalue))+1;
if ((PCI_BASE_SPACE_M & regvalue) == PCI_BASE_SPACE_MEM) {
if ((PCI_BASE_TYPE_M & regvalue) == PCI_BASE_TYPE_MEM) {
hiword |= PCI_ADDR_MEM32;
} else if ((PCI_BASE_TYPE_M & regvalue)
== PCI_BASE_TYPE_ALL) {
hiword |= PCI_ADDR_MEM64;
}
if (regvalue & PCI_BASE_PREF_M)
hiword |= PCI_REG_PF_M;
} else {
hiword |= PCI_ADDR_IO;
}
}
addition.pci_phys_hi = hiword;
addition.pci_phys_mid = 0;
addition.pci_phys_low = 0;
addition.pci_size_hi = 0;
addition.pci_size_low = size;
bcopy(reg, newreg, rlen);
bcopy(&addition, newreg + rlen, sizeof (pci_regspec_t));
DEBUG3("updating BAR@off %x with %x,%x\n", reg_offset, hiword, size);
/*
* Write out the new "reg" property
*/
(void) ndi_prop_update_int_array(DDI_DEV_T_NONE, dip, "reg",
(int *)newreg, (rlen + sizeof (pci_regspec_t))/sizeof (int));
kmem_free((caddr_t)newreg, rlen+sizeof (pci_regspec_t));
kmem_free((caddr_t)reg, rlen);
return (PCICFG_SUCCESS);
}
static int
pcicfg_update_assigned_prop_value(dev_info_t *dip, uint32_t size,
uint32_t base, uint32_t base_hi, uint_t reg_offset)
{
int rlen;
pci_regspec_t *reg;
uint32_t hiword;
pci_regspec_t addition;
uint_t status;
status = ddi_getlongprop(DDI_DEV_T_ANY,
dip, DDI_PROP_DONTPASS, "reg", (caddr_t)&reg, &rlen);
switch (status) {
case DDI_PROP_SUCCESS:
break;
case DDI_PROP_NO_MEMORY:
DEBUG0("reg present, but unable to get memory\n");
return (PCICFG_FAILURE);
default:
/*
* Since the config space "reg" entry should have been
* created, we expect a "reg" property already
* present here.
*/
DEBUG0("no reg property\n");
return (PCICFG_FAILURE);
}
/*
* Build the regspec, then add it to the existing one(s)
*/
hiword = PCICFG_MAKE_REG_HIGH(PCI_REG_BUS_G(reg->pci_phys_hi),
PCI_REG_DEV_G(reg->pci_phys_hi),
PCI_REG_FUNC_G(reg->pci_phys_hi), reg_offset);
hiword |= PCI_REG_REL_M;
if (reg_offset == PCI_CONF_ROM) {
hiword |= PCI_ADDR_MEM32;
base = PCI_BASE_ROM_ADDR_M & base;
} else {
if ((PCI_BASE_SPACE_M & base) == PCI_BASE_SPACE_MEM) {
if ((PCI_BASE_TYPE_M & base) == PCI_BASE_TYPE_MEM) {
hiword |= PCI_ADDR_MEM32;
} else if ((PCI_BASE_TYPE_M & base)
== PCI_BASE_TYPE_ALL) {
hiword |= PCI_ADDR_MEM64;
}
if (base & PCI_BASE_PREF_M)
hiword |= PCI_REG_PF_M;
base = PCI_BASE_M_ADDR_M & base;
} else {
hiword |= PCI_ADDR_IO;
base = PCI_BASE_IO_ADDR_M & base;
base_hi = 0;
}
}
addition.pci_phys_hi = hiword;
addition.pci_phys_mid = base_hi;
addition.pci_phys_low = base;
addition.pci_size_hi = 0;
addition.pci_size_low = size;
DEBUG3("updating BAR@off %x with %x,%x\n", reg_offset, hiword, size);
kmem_free((caddr_t)reg, rlen);
return (pcicfg_update_assigned_prop(dip, &addition));
}
static void
pcicfg_device_on(ddi_acc_handle_t config_handle)
{
/*
* Enable memory, IO, and bus mastership
* XXX should we enable parity, SERR#,
* fast back-to-back, and addr. stepping?
*/
pci_config_put16(config_handle, PCI_CONF_COMM,
pci_config_get16(config_handle, PCI_CONF_COMM) | 0x7);
}
static void
pcicfg_device_off(ddi_acc_handle_t config_handle)
{
/*
* Disable I/O and memory traffic through the bridge
*/
pci_config_put16(config_handle, PCI_CONF_COMM, 0x0);
}
/*
* Setup the basic 1275 properties based on information found in the config
* header of the PCI device
*/
static int
pcicfg_set_standard_props(dev_info_t *dip, ddi_acc_handle_t config_handle,
uint8_t pcie_dev)
{
int ret;
uint16_t cap_id_loc, val;
uint32_t wordval;
uint8_t byteval;
/* These two exists only for non-bridges */
if (((pci_config_get8(config_handle, PCI_CONF_HEADER) &
PCI_HEADER_TYPE_M) == PCI_HEADER_ZERO) && !pcie_dev) {
byteval = pci_config_get8(config_handle, PCI_CONF_MIN_G);
if ((ret = ndi_prop_update_int(DDI_DEV_T_NONE, dip,
"min-grant", byteval)) != DDI_SUCCESS) {
return (ret);
}
byteval = pci_config_get8(config_handle, PCI_CONF_MAX_L);
if ((ret = ndi_prop_update_int(DDI_DEV_T_NONE, dip,
"max-latency", byteval)) != DDI_SUCCESS) {
return (ret);
}
}
/*
* These should always exist and have the value of the
* corresponding register value
*/
val = pci_config_get16(config_handle, PCI_CONF_VENID);
if ((ret = ndi_prop_update_int(DDI_DEV_T_NONE, dip, "vendor-id", val))
!= DDI_SUCCESS) {
return (ret);
}
val = pci_config_get16(config_handle, PCI_CONF_DEVID);
if ((ret = ndi_prop_update_int(DDI_DEV_T_NONE, dip, "device-id", val))
!= DDI_SUCCESS) {
return (ret);
}
byteval = pci_config_get8(config_handle, PCI_CONF_REVID);
if ((ret = ndi_prop_update_int(DDI_DEV_T_NONE, dip,
"revision-id", byteval)) != DDI_SUCCESS) {
return (ret);
}
wordval = (pci_config_get16(config_handle, PCI_CONF_SUBCLASS)<< 8) |
(pci_config_get8(config_handle, PCI_CONF_PROGCLASS));
if ((ret = ndi_prop_update_int(DDI_DEV_T_NONE, dip,
"class-code", wordval)) != DDI_SUCCESS) {
return (ret);
}
val = (pci_config_get16(config_handle, PCI_CONF_STAT) &
PCI_STAT_DEVSELT);
if ((ret = ndi_prop_update_int(DDI_DEV_T_NONE, dip,
"devsel-speed", val)) != DDI_SUCCESS) {
return (ret);
}
/*
* The next three are bits set in the status register. The property is
* present (but with no value other than its own existence) if the bit
* is set, non-existent otherwise
*/
if ((!pcie_dev) &&
(pci_config_get16(config_handle, PCI_CONF_STAT) & PCI_STAT_FBBC)) {
if ((ret = ndi_prop_update_int(DDI_DEV_T_NONE, dip,
"fast-back-to-back", 0)) != DDI_SUCCESS) {
return (ret);
}
}
if ((!pcie_dev) &&
(pci_config_get16(config_handle, PCI_CONF_STAT) & PCI_STAT_66MHZ)) {
if ((ret = ndi_prop_update_int(DDI_DEV_T_NONE, dip,
"66mhz-capable", 0)) != DDI_SUCCESS) {
return (ret);
}
}
if (pci_config_get16(config_handle, PCI_CONF_STAT) & PCI_STAT_UDF) {
if ((ret = ndi_prop_update_int(DDI_DEV_T_NONE, dip,
"udf-supported", 0)) != DDI_SUCCESS) {
return (ret);
}
}
/*
* These next three are optional and are not present
* if the corresponding register is zero. If the value
* is non-zero then the property exists with the value
* of the register.
*/
if ((val = pci_config_get16(config_handle, PCI_CONF_SUBVENID)) != 0) {
if ((ret = ndi_prop_update_int(DDI_DEV_T_NONE, dip,
"subsystem-vendor-id", val)) != DDI_SUCCESS) {
return (ret);
}
}
if ((val = pci_config_get16(config_handle, PCI_CONF_SUBSYSID)) != 0) {
if ((ret = ndi_prop_update_int(DDI_DEV_T_NONE, dip,
"subsystem-id", val)) != DDI_SUCCESS) {
return (ret);
}
}
if ((val = pci_config_get16(config_handle, PCI_CONF_CACHE_LINESZ))
!= 0) {
if ((ret = ndi_prop_update_int(DDI_DEV_T_NONE, dip,
"cache-line-size", val)) != DDI_SUCCESS) {
return (ret);
}
}
/*
* If the Interrupt Pin register is non-zero then the
* interrupts property exists
*/
if ((byteval = pci_config_get8(config_handle, PCI_CONF_IPIN)) != 0) {
/*
* If interrupt pin is non-zero,
* record the interrupt line used
*/
if ((ret = ndi_prop_update_int(DDI_DEV_T_NONE, dip,
"interrupts", byteval)) != DDI_SUCCESS) {
return (ret);
}
}
(void) PCI_CAP_LOCATE(config_handle, PCI_CAP_ID_PCI_E, &cap_id_loc);
if (pcie_dev && cap_id_loc != PCI_CAP_NEXT_PTR_NULL) {
val = pci_config_get16(config_handle, cap_id_loc + PCIE_PCIECAP)
& PCIE_PCIECAP_SLOT_IMPL;
/* if slot implemented, get physical slot number */
if (val) {
wordval = pci_config_get32(config_handle, cap_id_loc +
PCIE_SLOTCAP);
/* create the property only if slotnum set correctly? */
if ((ret = ndi_prop_update_int(DDI_DEV_T_NONE, dip,
"physical-slot#", PCIE_SLOTCAP_PHY_SLOT_NUM(
wordval))) != DDI_SUCCESS) {
return (ret);
}
}
}
return (PCICFG_SUCCESS);
}
static int
pcicfg_set_busnode_props(dev_info_t *dip, uint8_t pcie_device_type)
{
int ret;
char device_type[8];
if (pcie_device_type)
(void) strcpy(device_type, "pciex");
else
(void) strcpy(device_type, "pci");
if ((ret = ndi_prop_update_string(DDI_DEV_T_NONE, dip,
"device_type", device_type)) != DDI_SUCCESS) {
return (ret);
}
if ((ret = ndi_prop_update_int(DDI_DEV_T_NONE, dip,
"#address-cells", 3)) != DDI_SUCCESS) {
return (ret);
}
if ((ret = ndi_prop_update_int(DDI_DEV_T_NONE, dip, "#size-cells", 2))
!= DDI_SUCCESS) {
return (ret);
}
return (PCICFG_SUCCESS);
}
static int
pcicfg_set_childnode_props(dev_info_t *dip, ddi_acc_handle_t config_handle,
uint8_t pcie_dev)
{
int ret;
char *name;
char buffer[64], pprefix[8], nprefix[8];
uint16_t classcode;
uint8_t revid, pif, pclass, psubclass;
char *compat[24];
int i;
int n;
uint16_t sub_vid, sub_sid, vid, did;
/* set the property prefix based on the device type */
if (pcie_dev) {
(void) sprintf(pprefix, "pciex");
} else
(void) sprintf(pprefix, "pci");
/* set the prefix right for name property */
/* x86 platforms need to go with pci for upgrade purposes */
(void) sprintf(nprefix, "pci");
/*
* NOTE: These are for both a child and PCI-PCI bridge node
*/
sub_vid = pci_config_get16(config_handle, PCI_CONF_SUBVENID);
sub_sid = pci_config_get16(config_handle, PCI_CONF_SUBSYSID);
vid = pci_config_get16(config_handle, PCI_CONF_VENID);
did = pci_config_get16(config_handle, PCI_CONF_DEVID);
revid = pci_config_get8(config_handle, PCI_CONF_REVID);
pif = pci_config_get8(config_handle, PCI_CONF_PROGCLASS);
classcode = pci_config_get16(config_handle, PCI_CONF_SUBCLASS);
pclass = pci_config_get8(config_handle, PCI_CONF_BASCLASS);
psubclass = pci_config_get8(config_handle, PCI_CONF_SUBCLASS);
if (!sub_vid)
(void) sprintf(buffer, "%s%x,%x", nprefix, vid, did);
else
(void) sprintf(buffer, "%s%x,%x", nprefix, sub_vid, sub_sid);
/*
* In some environments, trying to use "generic" 1275 names is
* not the convention. In those cases use the name as created
* above. In all the rest of the cases, check to see if there
* is a generic name first.
*/
#ifdef _DONT_USE_1275_GENERIC_NAMES
name = buffer;
#else
if ((name = pcicfg_get_class_name(classcode)) == NULL) {
/*
* Set name to the above fabricated name
*/
name = buffer;
}
#endif
/*
* The node name field needs to be filled in with the name
*/
if (ndi_devi_set_nodename(dip, name, 0) != NDI_SUCCESS) {
DEBUG0("Failed to set nodename for node\n");
return (PCICFG_FAILURE);
}
/*
* Create the compatible property as an array of pointers
* to strings. Start with the buffer created above.
*/
n = 0;
/*
* Setup 'compatible' as per the PCI2.1 bindings document.
* pci[ex]VVVV,DDDD.SSSS.ssss.RR
* pci[ex]VVVV,DDDD.SSSS.ssss
* pciSSSS.ssss -> not created for PCIe as per PCIe bindings
* pci[ex]VVVV,DDDD.RR
* pci[ex]VVVV,DDDD
* pci[ex]class,CCSSPP
* pci[ex]class,CCSS
* Add legacy entries for compatibility with legacy devices and OS
* for x86.
* pciVVVV,DDDD.SSSS.ssss.RR
* pciVVVV,DDDD.SSSS.ssss
* pciSSSS.ssss
* pciVVVV,DDDD.RR
* pciVVVV,DDDD
* pciclass,CCSSPP
* pciclass,CCSS
*/
do {
if (sub_vid) {
/* pci[ex]VVVV,DDDD.SSSS.ssss.RR */
(void) sprintf(buffer, "%s%x,%x.%x.%x.%x", pprefix, vid,
did, sub_vid, sub_sid, revid);
compat[n] = kmem_alloc(strlen(buffer) + 1, KM_SLEEP);
(void) strcpy(compat[n++], buffer);
/* pci[ex]VVVV,DDDD.SSSS.ssss */
(void) sprintf(buffer, "%s%x,%x.%x.%x", pprefix, vid,
did, sub_vid, sub_sid);
compat[n] = kmem_alloc(strlen(buffer) + 1, KM_SLEEP);
(void) strcpy(compat[n++], buffer);
/* pciSSSS.ssss -> not created for PCIe as per PCIe */
/* binding to IEEE 1275 spec. */
if (!pcie_dev && pcicfg_do_legacy_props) {
(void) sprintf(buffer, "pci%x,%x", sub_vid,
sub_sid);
compat[n] = kmem_alloc(strlen(buffer) + 1,
KM_SLEEP);
(void) strcpy(compat[n++], buffer);
}
}
/* pci[ex]VVVV,DDDD.RR */
(void) sprintf(buffer, "%s%x,%x.%x", pprefix, vid, did, revid);
compat[n] = kmem_alloc(strlen(buffer) + 1, KM_SLEEP);
(void) strcpy(compat[n++], buffer);
/* pci[ex]VVVV,DDDD */
(void) sprintf(buffer, "%s%x,%x", pprefix, vid, did);
compat[n] = kmem_alloc(strlen(buffer) + 1, KM_SLEEP);
(void) strcpy(compat[n++], buffer);
/* pci[ex]class,CCSSPP */
(void) sprintf(buffer, "%sclass,%02x%02x%02x", pprefix, pclass,
psubclass, pif);
compat[n] = kmem_alloc(strlen(buffer) + 1, KM_SLEEP);
(void) strcpy(compat[n++], buffer);
/* pci[ex]class,CCSS */
(void) sprintf(buffer, "%sclass,%04x", pprefix, classcode);
compat[n] = kmem_alloc(strlen(buffer) + 1, KM_SLEEP);
(void) strcpy(compat[n++], buffer);
if (!pcie_dev)
break;
/* also add compatible names using "pci" prefix */
(void) sprintf(pprefix, "pci");
pcie_dev = 0;
} while (pcicfg_do_legacy_props);
ret = ndi_prop_update_string_array(DDI_DEV_T_NONE, dip, "compatible",
(char **)compat, n);
for (i = 0; i < n; i++) {
kmem_free(compat[i], strlen(compat[i]) + 1);
}
return (ret);
}
/*
* Program the bus numbers into the bridge
*/
static void
pcicfg_set_bus_numbers(ddi_acc_handle_t config_handle,
uint_t primary, uint_t secondary, uint_t subordinate)
{
DEBUG3("Setting bridge bus-range %d,%d,%d\n", primary, secondary,
subordinate);
/*
* Primary bus#
*/
pci_config_put8(config_handle, PCI_BCNF_PRIBUS, primary);
/*
* Secondary bus#
*/
pci_config_put8(config_handle, PCI_BCNF_SECBUS, secondary);
/*
* Set the subordinate bus number to ff in order to pass through any
* type 1 cycle with a bus number higher than the secondary bus#
*/
pci_config_put8(config_handle, PCI_BCNF_SUBBUS, subordinate);
}
/*
* Put bridge registers into initial state
*/
static void
pcicfg_setup_bridge(pcicfg_phdl_t *entry,
ddi_acc_handle_t handle)
{
/*
* The highest bus seen during probing is the max-subordinate bus
*/
pci_config_put8(handle, PCI_BCNF_SUBBUS, entry->highest_bus);
/*
* Reset the secondary bus
*/
pci_config_put16(handle, PCI_BCNF_BCNTRL,
pci_config_get16(handle, PCI_BCNF_BCNTRL) | 0x40);
drv_usecwait(1000);
pci_config_put16(handle, PCI_BCNF_BCNTRL,
pci_config_get16(handle, PCI_BCNF_BCNTRL) & ~0x40);
drv_usecwait(1000);
/*
* Program the memory base register with the
* start of the memory range
*/
pci_config_put16(handle, PCI_BCNF_MEM_BASE,
PCICFG_HIWORD(PCICFG_LOADDR(entry->memory_last)));
/*
* Program the I/O base register with the start of the I/O range
*/
pci_config_put8(handle, PCI_BCNF_IO_BASE_LOW,
PCICFG_HIBYTE(PCICFG_LOWORD(PCICFG_LOADDR(entry->io_last))));
pci_config_put16(handle, PCI_BCNF_IO_BASE_HI,
PCICFG_HIWORD(PCICFG_LOADDR(entry->io_last)));
/*
* Program the PF memory base register with the start of
* PF memory range
*/
pci_config_put16(handle, PCI_BCNF_PF_BASE_LOW,
PCICFG_HIWORD(PCICFG_LOADDR(entry->pf_memory_last)));
pci_config_put32(handle, PCI_BCNF_PF_BASE_HIGH,
PCICFG_HIADDR(entry->pf_memory_last));
/*
* Clear status bits
*/
pci_config_put16(handle, PCI_BCNF_SEC_STATUS, 0xffff);
/*
* Needs to be set to this value
*/
pci_config_put8(handle, PCI_CONF_ILINE, 0xf);
/*
* XXX - may be delay should be used since noone configures
* devices in the interrupt context
*/
drv_usecwait(pcicfg_sec_reset_delay); /* 1 sec wait */
}
static void
pcicfg_update_bridge(pcicfg_phdl_t *entry,
ddi_acc_handle_t handle)
{
uint_t length;
/*
* Program the memory limit register with the end of the memory range
*/
DEBUG1("DOWN ROUNDED ===>[0x%x]\n",
PCICFG_ROUND_DOWN(entry->memory_last, PCICFG_MEMGRAN));
pci_config_put16(handle, PCI_BCNF_MEM_LIMIT,
PCICFG_HIWORD(PCICFG_LOADDR(
PCICFG_ROUND_DOWN(entry->memory_last, PCICFG_MEMGRAN))));
/*
* Since this is a bridge, the rest of this range will
* be responded to by the bridge. We have to round up
* so no other device claims it.
*/
if ((length = (PCICFG_ROUND_UP(entry->memory_last, PCICFG_MEMGRAN)
- entry->memory_last)) > 0) {
(void) pcicfg_get_mem(entry, length, NULL);
DEBUG1("Added [0x%x]at the top of the bridge (mem)\n", length);
}
/*
* Program the PF memory limit register with the end of the memory range
*/
DEBUG1("DOWN ROUNDED ===>[0x%x]\n",
PCICFG_ROUND_DOWN(entry->pf_memory_last, PCICFG_MEMGRAN));
pci_config_put16(handle, PCI_BCNF_PF_LIMIT_LOW,
PCICFG_HIWORD(PCICFG_LOADDR(PCICFG_ROUND_DOWN(
entry->pf_memory_last, PCICFG_MEMGRAN))));
pci_config_put32(handle, PCI_BCNF_PF_LIMIT_HIGH, PCICFG_HIADDR(
PCICFG_ROUND_DOWN(entry->pf_memory_last, PCICFG_MEMGRAN)));
if ((length = (PCICFG_ROUND_UP(entry->pf_memory_last, PCICFG_MEMGRAN)
- entry->pf_memory_last)) > 0) {
(void) pcicfg_get_pf_mem(entry, length, NULL);
DEBUG1("Added [0x%x]at the top of the bridge (PF mem)\n",
length);
}
/*
* Program the I/O limit register with the end of the I/O range
*/
pci_config_put8(handle, PCI_BCNF_IO_LIMIT_LOW,
PCICFG_HIBYTE(PCICFG_LOWORD(
PCICFG_LOADDR(PCICFG_ROUND_DOWN(entry->io_last, PCICFG_IOGRAN)))));
pci_config_put16(handle, PCI_BCNF_IO_LIMIT_HI, PCICFG_HIWORD(
PCICFG_LOADDR(PCICFG_ROUND_DOWN(entry->io_last, PCICFG_IOGRAN))));
/*
* Same as above for I/O space. Since this is a
* bridge, the rest of this range will be responded
* to by the bridge. We have to round up so no
* other device claims it.
*/
if ((length = (PCICFG_ROUND_UP(entry->io_last, PCICFG_IOGRAN)
- entry->io_last)) > 0) {
(void) pcicfg_get_io(entry, length, NULL);
DEBUG1("Added [0x%x]at the top of the bridge (I/O)\n", length);
}
}
static int
pcicfg_probe_children(dev_info_t *parent, uint_t bus, uint_t device,
uint_t func, uint_t *highest_bus, pcicfg_flags_t flags, boolean_t is_pcie)
{
dev_info_t *new_child;
ddi_acc_handle_t config_handle;
uint8_t header_type, pcie_dev = 0;
int ret = PCICFG_FAILURE;
/*
* This node will be put immediately below
* "parent". Allocate a blank device node. It will either
* be filled in or freed up based on further probing.
*/
ndi_devi_alloc_sleep(parent, DEVI_PSEUDO_NEXNAME,
(pnode_t)DEVI_SID_NODEID, &new_child);
if (pcicfg_add_config_reg(new_child, bus, device, func)
!= DDI_SUCCESS) {
DEBUG0("pcicfg_probe_children():Failed to add candidate REG\n");
goto failedconfig;
}
if ((ret = pcicfg_config_setup(new_child, &config_handle))
!= PCICFG_SUCCESS) {
if (ret == PCICFG_NODEVICE) {
(void) ndi_devi_free(new_child);
return (ret);
}
DEBUG0("pcicfg_probe_children():"
"Failed to setup config space\n");
goto failedconfig;
}
if (is_pcie)
(void) pcie_init_bus(new_child, PCI_GETBDF(bus, device, func),
PCIE_BUS_INITIAL);
/*
* As soon as we have access to config space,
* turn off device. It will get turned on
* later (after memory is assigned).
*/
(void) pcicfg_device_off(config_handle);
/* check if we are PCIe device */
if (pcicfg_pcie_dev(new_child, config_handle) == DDI_SUCCESS) {
DEBUG0("PCIe device detected\n");
pcie_dev = 1;
}
/*
* Set 1275 properties common to all devices
*/
if (pcicfg_set_standard_props(new_child, config_handle, pcie_dev)
!= PCICFG_SUCCESS) {
DEBUG0("Failed to set standard properties\n");
goto failedchild;
}
/*
* Child node properties NOTE: Both for PCI-PCI bridge and child node
*/
if (pcicfg_set_childnode_props(new_child, config_handle, pcie_dev)
!= PCICFG_SUCCESS) {
goto failedchild;
}
header_type = pci_config_get8(config_handle, PCI_CONF_HEADER);
/*
* If this is not a multi-function card only probe function zero.
*/
if ((!(header_type & PCI_HEADER_MULTI)) && (func != 0)) {
ret = PCICFG_NODEVICE;
goto failedchild;
}
/*
* Attach the child to its parent
*/
(void) i_ndi_config_node(new_child, DS_LINKED, 0);
DEVI_SET_PCI(new_child);
if ((header_type & PCI_HEADER_TYPE_M) == PCI_HEADER_PPB) {
DEBUG3("--Bridge found bus [0x%x] device[0x%x] func [0x%x]\n",
bus, device, func);
/* Only support read-only probe for leaf device */
if (flags & PCICFG_FLAG_READ_ONLY)
goto failedchild;
ret = pcicfg_probe_bridge(new_child, config_handle, bus,
highest_bus, is_pcie);
if (ret != PCICFG_SUCCESS) {
(void) pcicfg_free_bridge_resources(new_child);
goto failedchild;
}
} else {
DEBUG3("--Leaf device found bus [0x%x] device"
"[0x%x] func [0x%x]\n", bus, device, func);
if (flags & PCICFG_FLAG_READ_ONLY) {
/*
* with read-only probe, don't do any resource
* allocation, just read the BARs and update props.
*/
ret = pcicfg_populate_props_from_bar(new_child,
config_handle);
if (ret != PCICFG_SUCCESS)
goto failedchild;
/*
* now allocate the resources, just remove the
* resources from the parent busra pool.
*/
ret = pcicfg_device_assign_readonly(new_child);
if (ret != PCICFG_SUCCESS) {
(void) pcicfg_free_device_resources(new_child);
goto failedchild;
}
} else {
/*
* update "reg" property by sizing the BARs.
*/
ret = pcicfg_populate_reg_props(new_child,
config_handle);
if (ret != PCICFG_SUCCESS)
goto failedchild;
/* now allocate & program the resources */
ret = pcicfg_device_assign(new_child);
if (ret != PCICFG_SUCCESS) {
(void) pcicfg_free_device_resources(new_child);
goto failedchild;
}
}
(void) ndi_devi_bind_driver(new_child, 0);
}
(void) pcicfg_config_teardown(&config_handle);
/*
* Properties have been setted up, so initialize the remaining
* bus_t fields
*/
if (is_pcie)
(void) pcie_init_bus(new_child, 0, PCIE_BUS_FINAL);
return (PCICFG_SUCCESS);
failedchild:
/*
* XXX check if it should be taken offline (if online)
*/
(void) pcicfg_config_teardown(&config_handle);
if (is_pcie)
pcie_fini_bus(new_child, PCIE_BUS_FINAL);
failedconfig:
(void) ndi_devi_free(new_child);
return (ret);
}
/*
* Sizing the BARs and update "reg" property
*/
static int
pcicfg_populate_reg_props(dev_info_t *new_child,
ddi_acc_handle_t config_handle)
{
int i;
uint32_t request;
i = PCI_CONF_BASE0;
while (i <= PCI_CONF_BASE5) {
pci_config_put32(config_handle, i, 0xffffffff);
request = pci_config_get32(config_handle, i);
/*
* If its a zero length, don't do
* any programming.
*/
if (request != 0) {
/*
* Add to the "reg" property
*/
if (pcicfg_update_reg_prop(new_child,
request, i) != PCICFG_SUCCESS) {
goto failedchild;
}
} else {
DEBUG1("BASE register [0x%x] asks for "
"[0x0]=[0x0](32)\n", i);
i += 4;
continue;
}
/*
* Increment by eight if it is 64 bit address space
*/
if ((PCI_BASE_TYPE_M & request) == PCI_BASE_TYPE_ALL) {
DEBUG3("BASE register [0x%x] asks for "
"[0x%x]=[0x%x] (64)\n",
i, request, (~(PCI_BASE_M_ADDR_M & request))+1);
i += 8;
} else {
DEBUG3("BASE register [0x%x] asks for "
"[0x%x]=[0x%x](32)\n",
i, request, (~(PCI_BASE_M_ADDR_M & request))+1);
i += 4;
}
}
/*
* Get the ROM size and create register for it
*/
pci_config_put32(config_handle, PCI_CONF_ROM, 0xfffffffe);
request = pci_config_get32(config_handle, PCI_CONF_ROM);
/*
* If its a zero length, don't do
* any programming.
*/
if (request != 0) {
DEBUG3("BASE register [0x%x] asks for [0x%x]=[0x%x]\n",
PCI_CONF_ROM, request,
(~(PCI_BASE_ROM_ADDR_M & request)) + 1);
/*
* Add to the "reg" property
*/
if (pcicfg_update_reg_prop(new_child, request, PCI_CONF_ROM)
!= PCICFG_SUCCESS) {
goto failedchild;
}
}
return (PCICFG_SUCCESS);
failedchild:
return (PCICFG_FAILURE);
}
/*
* Read the BARs and update properties. Used in virtual hotplug.
*/
static int
pcicfg_populate_props_from_bar(dev_info_t *new_child,
ddi_acc_handle_t config_handle)
{
uint32_t request, base, base_hi, size;
int i;
i = PCI_CONF_BASE0;
while (i <= PCI_CONF_BASE5) {
/*
* determine the size of the address space
*/
base = pci_config_get32(config_handle, i);
pci_config_put32(config_handle, i, 0xffffffff);
request = pci_config_get32(config_handle, i);
pci_config_put32(config_handle, i, base);
/*
* If its a zero length, don't do any programming.
*/
if (request != 0) {
/*
* Add to the "reg" property
*/
if (pcicfg_update_reg_prop(new_child,
request, i) != PCICFG_SUCCESS) {
goto failedchild;
}
if ((PCI_BASE_SPACE_IO & request) == 0 &&
(PCI_BASE_TYPE_M & request) == PCI_BASE_TYPE_ALL) {
base_hi = pci_config_get32(config_handle, i+4);
} else {
base_hi = 0;
}
/*
* Add to "assigned-addresses" property
*/
size = (~(PCI_BASE_M_ADDR_M & request))+1;
if (pcicfg_update_assigned_prop_value(new_child,
size, base, base_hi, i) != PCICFG_SUCCESS) {
goto failedchild;
}
} else {
DEBUG1("BASE register [0x%x] asks for [0x0]=[0x0]"
"(32)\n", i);
i += 4;
continue;
}
/*
* Increment by eight if it is 64 bit address space
*/
if ((PCI_BASE_TYPE_M & request) == PCI_BASE_TYPE_ALL) {
DEBUG3("BASE register [0x%x] asks for [0x%x]=[0x%x]"
"(64)\n", i, request,
(~(PCI_BASE_M_ADDR_M & request)) + 1);
i += 8;
} else {
DEBUG3("BASE register [0x%x] asks for [0x%x]=[0x%x]"
"(32)\n", i, request,
(~(PCI_BASE_M_ADDR_M & request)) + 1);
i += 4;
}
}
/*
* Get the ROM size and create register for it
*/
base = pci_config_get32(config_handle, PCI_CONF_ROM);
pci_config_put32(config_handle, PCI_CONF_ROM, 0xfffffffe);
request = pci_config_get32(config_handle, PCI_CONF_ROM);
pci_config_put32(config_handle, PCI_CONF_ROM, base);
/*
* If its a zero length, don't do
* any programming.
*/
if (request != 0) {
DEBUG3("BASE register [0x%x] asks for [0x%x]=[0x%x]\n",
PCI_CONF_ROM, request,
(~(PCI_BASE_ROM_ADDR_M & request)) + 1);
/*
* Add to the "reg" property
*/
if (pcicfg_update_reg_prop(new_child, request, PCI_CONF_ROM)
!= PCICFG_SUCCESS) {
goto failedchild;
}
/*
* Add to "assigned-addresses" property
*/
size = (~(PCI_BASE_ROM_ADDR_M & request))+1;
if (pcicfg_update_assigned_prop_value(new_child, size,
base, 0, PCI_CONF_ROM) != PCICFG_SUCCESS) {
goto failedchild;
}
}
return (PCICFG_SUCCESS);
failedchild:
return (PCICFG_FAILURE);
}
static int
pcicfg_probe_bridge(dev_info_t *new_child, ddi_acc_handle_t h, uint_t bus,
uint_t *highest_bus, boolean_t is_pcie)
{
uint64_t next_bus;
uint_t new_bus, num_slots;
ndi_ra_request_t req;
int rval, i, j;
uint64_t mem_answer, io_answer, mem_base, io_base, mem_alen, io_alen;
uint64_t pf_mem_answer, pf_mem_base, pf_mem_alen;
uint64_t mem_size, io_size, pf_mem_size;
uint64_t mem_end, pf_mem_end, io_end;
uint64_t round_answer, round_len;
ppb_ranges_t range[PCICFG_RANGE_LEN];
int bus_range[2];
pcicfg_phdl_t phdl;
int count;
uint64_t pcibus_base, pcibus_alen;
uint64_t max_bus;
uint8_t pcie_device_type = 0;
uint_t pf_mem_supported = 0;
dev_info_t *new_device;
int trans_device;
int ari_mode = B_FALSE;
int max_function = PCI_MAX_FUNCTIONS;
io_answer = io_base = io_alen = io_size = 0;
pf_mem_answer = pf_mem_base = pf_mem_size = pf_mem_alen = 0;
/*
* Set "device_type" to "pci", the actual type will be set later
* by pcicfg_set_busnode_props() below. This is needed as the
* pcicfg_ra_free() below would update "available" property based
* on "device_type".
*
* This code can be removed later after PCI configurator is changed
* to use PCIRM, which automatically update properties upon allocation
* and free, at that time we'll be able to remove the code inside
* ndi_ra_alloc/free() which currently updates "available" property
* for pci/pcie devices in pcie fabric.
*/
if (ndi_prop_update_string(DDI_DEV_T_NONE, new_child,
"device_type", "pci") != DDI_SUCCESS) {
DEBUG0("Failed to set \"device_type\" props\n");
return (PCICFG_FAILURE);
}
/*
* setup resource maps for the bridge node
*/
if (ndi_ra_map_setup(new_child, NDI_RA_TYPE_PCI_BUSNUM)
== NDI_FAILURE) {
DEBUG0("Can not setup resource map - NDI_RA_TYPE_PCI_BUSNUM\n");
rval = PCICFG_FAILURE;
goto cleanup;
}
if (ndi_ra_map_setup(new_child, NDI_RA_TYPE_MEM) == NDI_FAILURE) {
DEBUG0("Can not setup resource map - NDI_RA_TYPE_MEM\n");
rval = PCICFG_FAILURE;
goto cleanup;
}
if (ndi_ra_map_setup(new_child, NDI_RA_TYPE_IO) == NDI_FAILURE) {
DEBUG0("Can not setup resource map - NDI_RA_TYPE_IO\n");
rval = PCICFG_FAILURE;
goto cleanup;
}
if (ndi_ra_map_setup(new_child, NDI_RA_TYPE_PCI_PREFETCH_MEM) ==
NDI_FAILURE) {
DEBUG0("Can not setup resource map -"
" NDI_RA_TYPE_PCI_PREFETCH_MEM\n");
rval = PCICFG_FAILURE;
goto cleanup;
}
/*
* Allocate bus range pool for the bridge.
*/
bzero((caddr_t)&req, sizeof (ndi_ra_request_t));
req.ra_flags = (NDI_RA_ALLOC_BOUNDED | NDI_RA_ALLOC_PARTIAL_OK);
req.ra_boundbase = 0;
req.ra_boundlen = req.ra_len = (PCI_MAX_BUS_NUM -1);
req.ra_align_mask = 0; /* no alignment needed */
rval = ndi_ra_alloc(ddi_get_parent(new_child), &req,
&pcibus_base, &pcibus_alen, NDI_RA_TYPE_PCI_BUSNUM, NDI_RA_PASS);
if (rval != NDI_SUCCESS) {
if (rval == NDI_RA_PARTIAL_REQ) {
/*EMPTY*/
DEBUG0("NDI_RA_PARTIAL_REQ returned for bus range\n");
} else {
DEBUG0(
"Failed to allocate bus range for bridge\n");
rval = PCICFG_NORESRC;
goto cleanup;
}
}
DEBUG2("Bus Range Allocated [base=%d] [len=%d]\n",
pcibus_base, pcibus_alen);
/*
* Put available bus range into the pool.
* Take the first one for this bridge to use and don't give
* to child.
*/
(void) ndi_ra_free(new_child, pcibus_base+1, pcibus_alen-1,
NDI_RA_TYPE_PCI_BUSNUM, NDI_RA_PASS);
next_bus = pcibus_base;
max_bus = pcibus_base + pcibus_alen - 1;
new_bus = next_bus;
DEBUG1("NEW bus found ->[%d]\n", new_bus);
/* Keep track of highest bus for subordinate bus programming */
*highest_bus = new_bus;
/*
* Allocate (non-prefetchable) Memory Space for Bridge
*/
bzero((caddr_t)&req, sizeof (ndi_ra_request_t));
req.ra_flags = (NDI_RA_ALLOC_BOUNDED | NDI_RA_ALLOC_PARTIAL_OK);
req.ra_boundbase = 0;
/*
* limit the boundlen,len to a 32b quantity. It should be Ok to
* lose alignment-based-size of resource due to this.
*/
req.ra_boundlen = PCICFG_4GIG_LIMIT;
req.ra_len = PCICFG_4GIG_LIMIT; /* Get as big as possible */
req.ra_align_mask =
PCICFG_MEMGRAN - 1; /* 1M alignment on memory space */
rval = ndi_ra_alloc(ddi_get_parent(new_child), &req,
&mem_answer, &mem_alen, NDI_RA_TYPE_MEM, NDI_RA_PASS);
if (rval != NDI_SUCCESS) {
if (rval == NDI_RA_PARTIAL_REQ) {
/*EMPTY*/
DEBUG0("NDI_RA_PARTIAL_REQ returned\n");
} else {
DEBUG0(
"Failed to allocate memory for bridge\n");
rval = PCICFG_NORESRC;
goto cleanup;
}
}
DEBUG3("Bridge Memory Allocated [0x%x.%x] len [0x%x]\n",
PCICFG_HIADDR(mem_answer),
PCICFG_LOADDR(mem_answer),
mem_alen);
/*
* Put available memory into the pool.
*/
(void) ndi_ra_free(new_child, mem_answer, mem_alen, NDI_RA_TYPE_MEM,
NDI_RA_PASS);
mem_base = mem_answer;
/*
* Allocate I/O Space for Bridge
*/
bzero((caddr_t)&req, sizeof (ndi_ra_request_t));
req.ra_align_mask = PCICFG_IOGRAN - 1; /* 4k alignment */
req.ra_boundbase = 0;
req.ra_boundlen = PCICFG_4GIG_LIMIT;
req.ra_flags = (NDI_RA_ALLOC_BOUNDED | NDI_RA_ALLOC_PARTIAL_OK);
req.ra_len = PCICFG_4GIG_LIMIT; /* Get as big as possible */
rval = ndi_ra_alloc(ddi_get_parent(new_child), &req, &io_answer,
&io_alen, NDI_RA_TYPE_IO, NDI_RA_PASS);
if (rval != NDI_SUCCESS) {
if (rval == NDI_RA_PARTIAL_REQ) {
/*EMPTY*/
DEBUG0("NDI_RA_PARTIAL_REQ returned\n");
} else {
DEBUG0("Failed to allocate io space for bridge\n");
/* i/o space is an optional requirement so continue */
}
}
DEBUG3("Bridge IO Space Allocated [0x%x.%x] len [0x%x]\n",
PCICFG_HIADDR(io_answer), PCICFG_LOADDR(io_answer), io_alen);
/*
* Put available I/O into the pool.
*/
(void) ndi_ra_free(new_child, io_answer, io_alen, NDI_RA_TYPE_IO,
NDI_RA_PASS);
io_base = io_answer;
/*
* Check if the bridge supports Prefetchable memory range.
* If it does, then we setup PF memory range for the bridge.
* Otherwise, we skip the step of setting up PF memory
* range for it. This could cause config operation to
* fail if any devices under the bridge need PF memory.
*/
/* write a non zero value to the PF BASE register */
pci_config_put16(h, PCI_BCNF_PF_BASE_LOW, 0xfff0);
/* if the read returns zero then PF range is not supported */
if (pci_config_get16(h, PCI_BCNF_PF_BASE_LOW) == 0) {
/* bridge doesn't support PF memory range */
goto pf_setup_end;
} else {
pf_mem_supported = 1;
/* reset the PF BASE register */
pci_config_put16(h, PCI_BCNF_PF_BASE_LOW, 0);
}
/*
* Bridge supports PF mem range; Allocate PF Memory Space for it.
*
* Note: Both non-prefetchable and prefetchable memory space
* allocations are made within 32bit space. Currently, BIOSs
* allocate device memory for PCI devices within the 32bit space
* so this will not be a problem.
*/
bzero((caddr_t)&req, sizeof (ndi_ra_request_t));
req.ra_flags = NDI_RA_ALLOC_PARTIAL_OK | NDI_RA_ALLOC_BOUNDED;
req.ra_boundbase = 0;
req.ra_len = PCICFG_4GIG_LIMIT; /* Get as big as possible */
req.ra_align_mask =
PCICFG_MEMGRAN - 1; /* 1M alignment on memory space */
rval = ndi_ra_alloc(ddi_get_parent(new_child), &req,
&pf_mem_answer, &pf_mem_alen, NDI_RA_TYPE_PCI_PREFETCH_MEM,
NDI_RA_PASS);
if (rval != NDI_SUCCESS) {
if (rval == NDI_RA_PARTIAL_REQ) {
/*EMPTY*/
DEBUG0("NDI_RA_PARTIAL_REQ returned\n");
} else {
DEBUG0(
"Failed to allocate PF memory for bridge\n");
/* PF mem is an optional requirement so continue */
}
}
DEBUG3("Bridge PF Memory Allocated [0x%x.%x] len [0x%x]\n",
PCICFG_HIADDR(pf_mem_answer),
PCICFG_LOADDR(pf_mem_answer),
pf_mem_alen);
/*
* Put available PF memory into the pool.
*/
(void) ndi_ra_free(new_child, pf_mem_answer, pf_mem_alen,
NDI_RA_TYPE_PCI_PREFETCH_MEM, NDI_RA_PASS);
pf_mem_base = pf_mem_answer;
/*
* Program the PF memory base register with the
* start of the memory range
*/
pci_config_put16(h, PCI_BCNF_PF_BASE_LOW,
PCICFG_HIWORD(PCICFG_LOADDR(pf_mem_answer)));
pci_config_put32(h, PCI_BCNF_PF_BASE_HIGH,
PCICFG_HIADDR(pf_mem_answer));
/*
* Program the PF memory limit register with the
* end of the memory range.
*/
pci_config_put16(h, PCI_BCNF_PF_LIMIT_LOW,
PCICFG_HIWORD(PCICFG_LOADDR(
PCICFG_ROUND_DOWN((pf_mem_answer + pf_mem_alen),
PCICFG_MEMGRAN) - 1)));
pci_config_put32(h, PCI_BCNF_PF_LIMIT_HIGH,
PCICFG_HIADDR(PCICFG_ROUND_DOWN((pf_mem_answer + pf_mem_alen),
PCICFG_MEMGRAN) - 1));
/*
* Allocate the chunk of PF memory (if any) not programmed into the
* bridge because of the round down.
*/
if (PCICFG_ROUND_DOWN((pf_mem_answer + pf_mem_alen), PCICFG_MEMGRAN)
!= (pf_mem_answer + pf_mem_alen)) {
DEBUG0("Need to allocate Memory round off chunk\n");
bzero((caddr_t)&req, sizeof (ndi_ra_request_t));
req.ra_flags = NDI_RA_ALLOC_SPECIFIED;
req.ra_addr = PCICFG_ROUND_DOWN((pf_mem_answer + pf_mem_alen),
PCICFG_MEMGRAN);
req.ra_len = (pf_mem_answer + pf_mem_alen) -
(PCICFG_ROUND_DOWN((pf_mem_answer + pf_mem_alen),
PCICFG_MEMGRAN));
(void) ndi_ra_alloc(new_child, &req,
&round_answer, &round_len, NDI_RA_TYPE_PCI_PREFETCH_MEM,
NDI_RA_PASS);
}
pf_setup_end:
/*
* Program the memory base register with the
* start of the memory range
*/
pci_config_put16(h, PCI_BCNF_MEM_BASE,
PCICFG_HIWORD(PCICFG_LOADDR(mem_answer)));
/*
* Program the memory limit register with the
* end of the memory range.
*/
pci_config_put16(h, PCI_BCNF_MEM_LIMIT,
PCICFG_HIWORD(PCICFG_LOADDR(
PCICFG_ROUND_DOWN((mem_answer + mem_alen), PCICFG_MEMGRAN) - 1)));
/*
* Allocate the chunk of memory (if any) not programmed into the
* bridge because of the round down.
*/
if (PCICFG_ROUND_DOWN((mem_answer + mem_alen), PCICFG_MEMGRAN)
!= (mem_answer + mem_alen)) {
DEBUG0("Need to allocate Memory round off chunk\n");
bzero((caddr_t)&req, sizeof (ndi_ra_request_t));
req.ra_flags = NDI_RA_ALLOC_SPECIFIED;
req.ra_addr = PCICFG_ROUND_DOWN((mem_answer + mem_alen),
PCICFG_MEMGRAN);
req.ra_len = (mem_answer + mem_alen) -
(PCICFG_ROUND_DOWN((mem_answer + mem_alen),
PCICFG_MEMGRAN));
(void) ndi_ra_alloc(new_child, &req,
&round_answer, &round_len, NDI_RA_TYPE_MEM, NDI_RA_PASS);
}
/*
* Program the I/O Space Base
*/
pci_config_put8(h, PCI_BCNF_IO_BASE_LOW,
PCICFG_HIBYTE(PCICFG_LOWORD(
PCICFG_LOADDR(io_answer))));
pci_config_put16(h, PCI_BCNF_IO_BASE_HI,
PCICFG_HIWORD(PCICFG_LOADDR(io_answer)));
/*
* Program the I/O Space Limit
*/
pci_config_put8(h, PCI_BCNF_IO_LIMIT_LOW,
PCICFG_HIBYTE(PCICFG_LOWORD(
PCICFG_LOADDR(PCICFG_ROUND_DOWN(io_answer + io_alen,
PCICFG_IOGRAN)))) - 1);
pci_config_put16(h, PCI_BCNF_IO_LIMIT_HI,
PCICFG_HIWORD(PCICFG_LOADDR(
PCICFG_ROUND_DOWN(io_answer + io_alen, PCICFG_IOGRAN)))
- 1);
/*
* Allocate the chunk of I/O (if any) not programmed into the
* bridge because of the round down.
*/
if (PCICFG_ROUND_DOWN((io_answer + io_alen), PCICFG_IOGRAN)
!= (io_answer + io_alen)) {
DEBUG0("Need to allocate I/O round off chunk\n");
bzero((caddr_t)&req, sizeof (ndi_ra_request_t));
req.ra_flags = NDI_RA_ALLOC_SPECIFIED;
req.ra_addr = PCICFG_ROUND_DOWN((io_answer + io_alen),
PCICFG_IOGRAN);
req.ra_len = (io_answer + io_alen) -
(PCICFG_ROUND_DOWN((io_answer + io_alen),
PCICFG_IOGRAN));
(void) ndi_ra_alloc(new_child, &req,
&round_answer, &round_len, NDI_RA_TYPE_IO, NDI_RA_PASS);
}
(void) pcicfg_set_bus_numbers(h, bus, new_bus, max_bus);
/*
* Setup "ranges" and "bus-range" properties before onlining
* the bridge.
*/
bzero((caddr_t)range, sizeof (ppb_ranges_t) * PCICFG_RANGE_LEN);
range[0].child_high = range[0].parent_high |= (PCI_REG_REL_M |
PCI_ADDR_IO);
range[0].child_low = range[0].parent_low = io_base;
range[1].child_high = range[1].parent_high |=
(PCI_REG_REL_M | PCI_ADDR_MEM32);
range[1].child_low = range[1].parent_low = mem_base;
range[2].child_high = range[2].parent_high |=
(PCI_REG_REL_M | PCI_ADDR_MEM64 | PCI_REG_PF_M);
range[2].child_low = range[2].parent_low = pf_mem_base;
range[0].size_low = io_alen;
(void) pcicfg_update_ranges_prop(new_child, &range[0]);
range[1].size_low = mem_alen;
(void) pcicfg_update_ranges_prop(new_child, &range[1]);
range[2].size_low = pf_mem_alen;
(void) pcicfg_update_ranges_prop(new_child, &range[2]);
bus_range[0] = new_bus;
bus_range[1] = max_bus;
(void) ndi_prop_update_int_array(DDI_DEV_T_NONE, new_child,
"bus-range", bus_range, 2);
/*
* Reset the secondary bus
*/
pci_config_put16(h, PCI_BCNF_BCNTRL,
pci_config_get16(h, PCI_BCNF_BCNTRL) | 0x40);
drv_usecwait(100);
pci_config_put16(h, PCI_BCNF_BCNTRL,
pci_config_get16(h, PCI_BCNF_BCNTRL) & ~0x40);
/*
* Clear status bits
*/
pci_config_put16(h, PCI_BCNF_SEC_STATUS, 0xffff);
/*
* Needs to be set to this value
*/
pci_config_put8(h, PCI_CONF_ILINE, 0xf);
/* check our device_type as defined by Open Firmware */
if (pcicfg_pcie_device_type(new_child, h) == DDI_SUCCESS)
pcie_device_type = 1;
/*
* Set bus properties
*/
if (pcicfg_set_busnode_props(new_child, pcie_device_type)
!= PCICFG_SUCCESS) {
DEBUG0("Failed to set busnode props\n");
rval = PCICFG_FAILURE;
goto cleanup;
}
(void) pcicfg_device_on(h);
if (is_pcie)
(void) pcie_init_bus(new_child, 0, PCIE_BUS_FINAL);
if (ndi_devi_online(new_child, NDI_NO_EVENT|NDI_CONFIG)
!= NDI_SUCCESS) {
DEBUG0("Unable to online bridge\n");
rval = PCICFG_FAILURE;
goto cleanup;
}
DEBUG0("Bridge is ONLINE\n");
/*
* After a Reset, we need to wait 2^25 clock cycles before the
* first Configuration access. The worst case is 33MHz, which
* is a 1 second wait.
*/
drv_usecwait(pcicfg_sec_reset_delay);
/*
* Probe all children devices
*/
DEBUG0("Bridge Programming Complete - probe children\n");
ndi_devi_enter(new_child, &count);
for (i = 0; ((i < PCI_MAX_DEVICES) && (ari_mode == B_FALSE));
i++) {
for (j = 0; j < max_function; ) {
if (ari_mode)
trans_device = j >> 3;
else
trans_device = i;
if ((rval = pcicfg_probe_children(new_child,
new_bus, trans_device, j & 7, highest_bus,
0, is_pcie)) != PCICFG_SUCCESS) {
if (rval == PCICFG_NODEVICE) {
DEBUG3("No Device at bus [0x%x]"
"device [0x%x] "
"func [0x%x]\n", new_bus,
trans_device, j & 7);
if (j)
goto next;
} else
/*EMPTY*/
DEBUG3("Failed to configure bus "
"[0x%x] device [0x%x] "
"func [0x%x]\n", new_bus,
trans_device, j & 7);
break;
}
next:
new_device = pcicfg_devi_find(new_child, trans_device,
(j & 7));
/*
* Determine if ARI Forwarding should be enabled.
*/
if (j == 0) {
if (new_device == NULL)
break;
if ((pcie_ari_supported(new_child) ==
PCIE_ARI_FORW_SUPPORTED) &&
(pcie_ari_device(new_device) ==
PCIE_ARI_DEVICE)) {
if (pcie_ari_enable(new_child) ==
DDI_SUCCESS) {
(void) ddi_prop_create(
DDI_DEV_T_NONE,
new_child,
DDI_PROP_CANSLEEP,
"ari-enabled", NULL, 0);
ari_mode = B_TRUE;
max_function =
PCICFG_MAX_ARI_FUNCTION;
}
}
}
if (ari_mode == B_TRUE) {
int next_function;
if (new_device == NULL)
break;
if (pcie_ari_get_next_function(new_device,
&next_function) != DDI_SUCCESS)
break;
j = next_function;
if (next_function == 0)
break;
} else
j++;
}
/* if any function fails to be configured, no need to proceed */
if (rval != PCICFG_NODEVICE)
break;
}
ndi_devi_exit(new_child, count);
/*
* Offline the bridge to allow reprogramming of resources.
*
* This should always succeed since nobody else has started to
* use it yet, failing to detach the driver would indicate a bug.
* Also in that case it's better just panic than allowing the
* configurator to proceed with BAR reprogramming without bridge
* driver detached.
*/
VERIFY(ndi_devi_offline(new_child, NDI_NO_EVENT|NDI_UNCONFIG)
== NDI_SUCCESS);
if (is_pcie)
pcie_fini_bus(new_child, PCIE_BUS_INITIAL);
phdl.dip = new_child;
phdl.memory_base = mem_answer;
phdl.io_base = io_answer;
phdl.pf_memory_base = pf_mem_answer;
phdl.error = PCICFG_SUCCESS; /* in case of empty child tree */
ndi_devi_enter(ddi_get_parent(new_child), &count);
ddi_walk_devs(new_child, pcicfg_find_resource_end, (void *)&phdl);
ndi_devi_exit(ddi_get_parent(new_child), count);
num_slots = pcicfg_get_nslots(new_child, h);
mem_end = PCICFG_ROUND_UP(phdl.memory_base, PCICFG_MEMGRAN);
io_end = PCICFG_ROUND_UP(phdl.io_base, PCICFG_IOGRAN);
pf_mem_end = PCICFG_ROUND_UP(phdl.pf_memory_base, PCICFG_MEMGRAN);
DEBUG4("Start of Unallocated Bridge(%d slots) Resources Mem=0x%lx "
"I/O=0x%lx PF_mem=%x%lx\n", num_slots, mem_end, io_end, pf_mem_end);
/*
* Before probing the children we've allocated maximum MEM/IO
* resources from parent, and updated "available" property
* accordingly. Later we'll be giving up unused resources to
* the parent, thus we need to destroy "available" property
* here otherwise it will be out-of-sync with the actual free
* resources this bridge has. This property will be rebuilt below
* with the actual free resources reserved for hotplug slots
* (if any).
*/
(void) ndi_prop_remove(DDI_DEV_T_NONE, new_child, "available");
/*
* if the bridge a slots, then preallocate. If not, assume static
* configuration. Also check for preallocation limits and spit
* warning messages appropriately (perhaps some can be in debug mode).
*/
if (num_slots) {
uint64_t mem_reqd = mem_answer +
(num_slots * pcicfg_slot_memsize);
uint64_t io_reqd = io_answer +
(num_slots * pcicfg_slot_iosize);
uint64_t pf_mem_reqd = pf_mem_answer +
(num_slots * pcicfg_slot_pf_memsize);
uint8_t highest_bus_reqd = new_bus +
(num_slots * pcicfg_slot_busnums);
#ifdef DEBUG
if (mem_end > mem_reqd)
DEBUG3("Memory space consumed by bridge more "
"than planned for %d slot(s)(%" PRIx64 ",%"
PRIx64 ")", num_slots, mem_answer, mem_end);
if (io_end > io_reqd)
DEBUG3("IO space consumed by bridge more than"
" planned for %d slot(s)(%" PRIx64 ",%" PRIx64 ")",
num_slots, io_answer, io_end);
if (pf_mem_end > pf_mem_reqd)
DEBUG3("PF Memory space consumed by bridge"
" more than planned for %d slot(s)(%" PRIx64 ",%"
PRIx64 ")", num_slots, pf_mem_answer, pf_mem_end);
if (*highest_bus > highest_bus_reqd)
DEBUG3("Buses consumed by bridge more "
"than planned for %d slot(s)(%x, %x)",
num_slots, new_bus, *highest_bus);
if (mem_reqd > (mem_answer + mem_alen))
DEBUG3("Memory space required by bridge more "
"than available for %d slot(s)(%" PRIx64 ",%"
PRIx64 ")", num_slots, mem_answer, mem_end);
if (io_reqd > (io_answer + io_alen))
DEBUG3("IO space required by bridge more than"
"available for %d slot(s)(%" PRIx64 ",%" PRIx64 ")",
num_slots, io_answer, io_end);
if (pf_mem_reqd > (pf_mem_answer + pf_mem_alen))
DEBUG3("PF Memory space required by bridge"
" more than available for %d slot(s)(%" PRIx64 ",%"
PRIx64 ")", num_slots, pf_mem_answer, pf_mem_end);
if (highest_bus_reqd > max_bus)
DEBUG3("Bus numbers required by bridge more "
"than available for %d slot(s)(%x, %x)",
num_slots, new_bus, *highest_bus);
#endif
mem_end = MAX((MIN(mem_reqd, (mem_answer + mem_alen))),
mem_end);
io_end = MAX((MIN(io_reqd, (io_answer + io_alen))), io_end);
pf_mem_end = MAX((MIN(pf_mem_reqd, (pf_mem_answer +
pf_mem_alen))), pf_mem_end);
*highest_bus = MAX((MIN(highest_bus_reqd, max_bus)),
*highest_bus);
DEBUG4("mem_end %lx, io_end %lx, pf_mem_end %lx"
" highest_bus %x\n", mem_end, io_end, pf_mem_end,
*highest_bus);
}
/*
* Give back unused memory space to parent.
*/
(void) ndi_ra_free(ddi_get_parent(new_child), mem_end,
(mem_answer + mem_alen) - mem_end, NDI_RA_TYPE_MEM, NDI_RA_PASS);
if (mem_end == mem_answer) {
DEBUG0("No memory resources used\n");
/*
* To prevent the bridge from forwarding any Memory
* transactions, the Memory Limit will be programmed
* with a smaller value than the Memory Base.
*/
pci_config_put16(h, PCI_BCNF_MEM_BASE, 0xffff);
pci_config_put16(h, PCI_BCNF_MEM_LIMIT, 0);
mem_size = 0;
} else {
/*
* Reprogram the end of the memory.
*/
pci_config_put16(h, PCI_BCNF_MEM_LIMIT,
PCICFG_HIWORD(mem_end) - 1);
mem_size = mem_end - mem_base;
}
/*
* Give back unused io space to parent.
*/
(void) ndi_ra_free(ddi_get_parent(new_child),
io_end, (io_answer + io_alen) - io_end,
NDI_RA_TYPE_IO, NDI_RA_PASS);
if (io_end == io_answer) {
DEBUG0("No IO Space resources used\n");
/*
* To prevent the bridge from forwarding any I/O
* transactions, the I/O Limit will be programmed
* with a smaller value than the I/O Base.
*/
pci_config_put8(h, PCI_BCNF_IO_LIMIT_LOW, 0);
pci_config_put16(h, PCI_BCNF_IO_LIMIT_HI, 0);
pci_config_put8(h, PCI_BCNF_IO_BASE_LOW, 0xff);
pci_config_put16(h, PCI_BCNF_IO_BASE_HI, 0);
io_size = 0;
} else {
/*
* Reprogram the end of the io space.
*/
pci_config_put8(h, PCI_BCNF_IO_LIMIT_LOW,
PCICFG_HIBYTE(PCICFG_LOWORD(
PCICFG_LOADDR(io_end) - 1)));
pci_config_put16(h, PCI_BCNF_IO_LIMIT_HI,
PCICFG_HIWORD(PCICFG_LOADDR(io_end - 1)));
io_size = io_end - io_base;
}
/*
* Give back unused PF memory space to parent.
*/
if (pf_mem_supported) {
(void) ndi_ra_free(ddi_get_parent(new_child),
pf_mem_end, (pf_mem_answer + pf_mem_alen) - pf_mem_end,
NDI_RA_TYPE_PCI_PREFETCH_MEM, NDI_RA_PASS);
if (pf_mem_end == pf_mem_answer) {
DEBUG0("No PF memory resources used\n");
/*
* To prevent the bridge from forwarding any PF Memory
* transactions, the PF Memory Limit will be programmed
* with a smaller value than the Memory Base.
*/
pci_config_put16(h, PCI_BCNF_PF_BASE_LOW, 0xfff0);
pci_config_put32(h, PCI_BCNF_PF_BASE_HIGH, 0xffffffff);
pci_config_put16(h, PCI_BCNF_PF_LIMIT_LOW, 0);
pci_config_put32(h, PCI_BCNF_PF_LIMIT_HIGH, 0);
pf_mem_size = 0;
} else {
/*
* Reprogram the end of the PF memory range.
*/
pci_config_put16(h, PCI_BCNF_PF_LIMIT_LOW,
PCICFG_HIWORD(PCICFG_LOADDR(pf_mem_end - 1)));
pci_config_put32(h, PCI_BCNF_PF_LIMIT_HIGH,
PCICFG_HIADDR(pf_mem_end - 1));
pf_mem_size = pf_mem_end - pf_mem_base;
}
}
if ((max_bus - *highest_bus) > 0) {
/*
* Give back unused bus numbers
*/
(void) ndi_ra_free(ddi_get_parent(new_child),
*highest_bus+1, max_bus - *highest_bus,
NDI_RA_TYPE_PCI_BUSNUM, NDI_RA_PASS);
}
/*
* Set bus numbers to ranges encountered during scan
*/
(void) pcicfg_set_bus_numbers(h, bus, new_bus, *highest_bus);
/*
* Remove the ranges property if it exists since we will create
* a new one.
*/
(void) ndi_prop_remove(DDI_DEV_T_NONE, new_child, "ranges");
DEBUG2("Creating Ranges property - Mem Address %lx Mem Size %x\n",
mem_base, mem_size);
DEBUG2(" - I/O Address %lx I/O Size %x\n",
io_base, io_size);
DEBUG2(" - PF Mem address %lx PF Mem Size %x\n",
pf_mem_base, pf_mem_size);
bzero((caddr_t)range, sizeof (ppb_ranges_t) * PCICFG_RANGE_LEN);
range[0].child_high = range[0].parent_high |= (PCI_REG_REL_M |
PCI_ADDR_IO);
range[0].child_low = range[0].parent_low = io_base;
range[1].child_high = range[1].parent_high |=
(PCI_REG_REL_M | PCI_ADDR_MEM32);
range[1].child_low = range[1].parent_low = mem_base;
range[2].child_high = range[2].parent_high |=
(PCI_REG_REL_M | PCI_ADDR_MEM64 | PCI_REG_PF_M);
range[2].child_low = range[2].parent_low = pf_mem_base;
if (io_size > 0) {
range[0].size_low = io_size;
(void) pcicfg_update_ranges_prop(new_child, &range[0]);
}
if (mem_size > 0) {
range[1].size_low = mem_size;
(void) pcicfg_update_ranges_prop(new_child, &range[1]);
}
if (pf_mem_size > 0) {
range[2].size_low = pf_mem_size;
(void) pcicfg_update_ranges_prop(new_child, &range[2]);
}
bus_range[0] = pci_config_get8(h, PCI_BCNF_SECBUS);
bus_range[1] = pci_config_get8(h, PCI_BCNF_SUBBUS);
DEBUG1("End of bridge probe: bus_range[0] = %d\n", bus_range[0]);
DEBUG1("End of bridge probe: bus_range[1] = %d\n", bus_range[1]);
(void) ndi_prop_update_int_array(DDI_DEV_T_NONE, new_child,
"bus-range", bus_range, 2);
rval = PCICFG_SUCCESS;
PCICFG_DUMP_BRIDGE_CONFIG(h);
cleanup:
/* free up resources (for error return case only) */
if (rval != PCICFG_SUCCESS) {
if (mem_alen)
(void) ndi_ra_free(ddi_get_parent(new_child), mem_base,
mem_alen, NDI_RA_TYPE_MEM, NDI_RA_PASS);
if (io_alen)
(void) ndi_ra_free(ddi_get_parent(new_child), io_base,
io_alen, NDI_RA_TYPE_IO, NDI_RA_PASS);
if (pf_mem_alen)
(void) ndi_ra_free(ddi_get_parent(new_child),
pf_mem_base, pf_mem_alen,
NDI_RA_TYPE_PCI_PREFETCH_MEM, NDI_RA_PASS);
if (pcibus_alen)
(void) ndi_ra_free(ddi_get_parent(new_child),
pcibus_base, pcibus_alen, NDI_RA_TYPE_PCI_BUSNUM,
NDI_RA_PASS);
}
/* free up any resource maps setup for the bridge node */
(void) ndi_ra_map_destroy(new_child, NDI_RA_TYPE_PCI_BUSNUM);
(void) ndi_ra_map_destroy(new_child, NDI_RA_TYPE_IO);
(void) ndi_ra_map_destroy(new_child, NDI_RA_TYPE_MEM);
(void) ndi_ra_map_destroy(new_child, NDI_RA_TYPE_PCI_PREFETCH_MEM);
return (rval);
}
static int
pcicfg_find_resource_end(dev_info_t *dip, void *hdl)
{
pcicfg_phdl_t *entry = (pcicfg_phdl_t *)hdl;
pci_regspec_t *pci_ap;
int length;
int rcount;
int i;
entry->error = PCICFG_SUCCESS;
if (dip == entry->dip) {
DEBUG0("Don't include parent bridge node\n");
return (DDI_WALK_CONTINUE);
} else {
if (ddi_getlongprop(DDI_DEV_T_ANY, dip,
DDI_PROP_DONTPASS, "assigned-addresses",
(caddr_t)&pci_ap, &length) != DDI_PROP_SUCCESS) {
DEBUG0("Node doesn't have assigned-addresses\n");
return (DDI_WALK_CONTINUE);
}
rcount = length / sizeof (pci_regspec_t);
for (i = 0; i < rcount; i++) {
switch (PCI_REG_ADDR_G(pci_ap[i].pci_phys_hi)) {
case PCI_REG_ADDR_G(PCI_ADDR_MEM32):
if (pci_ap[i].pci_phys_hi & PCI_REG_PF_M) {
if ((pci_ap[i].pci_phys_low +
pci_ap[i].pci_size_low) >
entry->pf_memory_base) {
entry->pf_memory_base =
pci_ap[i].pci_phys_low +
pci_ap[i].pci_size_low;
}
} else {
if ((pci_ap[i].pci_phys_low +
pci_ap[i].pci_size_low) >
entry->memory_base) {
entry->memory_base =
pci_ap[i].pci_phys_low +
pci_ap[i].pci_size_low;
}
}
break;
case PCI_REG_ADDR_G(PCI_ADDR_MEM64):
if (pci_ap[i].pci_phys_hi & PCI_REG_PF_M) {
if ((PCICFG_LADDR(
pci_ap[i].pci_phys_low,
pci_ap[i].pci_phys_mid) +
pci_ap[i].pci_size_low) >
entry->pf_memory_base) {
entry->pf_memory_base =
PCICFG_LADDR(
pci_ap[i].pci_phys_low,
pci_ap[i].pci_phys_mid) +
pci_ap[i].pci_size_low;
}
} else {
if ((PCICFG_LADDR(
pci_ap[i].pci_phys_low,
pci_ap[i].pci_phys_mid) +
pci_ap[i].pci_size_low) >
entry->memory_base) {
entry->memory_base =
PCICFG_LADDR(
pci_ap[i].pci_phys_low,
pci_ap[i].pci_phys_mid) +
pci_ap[i].pci_size_low;
}
}
break;
case PCI_REG_ADDR_G(PCI_ADDR_IO):
if ((pci_ap[i].pci_phys_low +
pci_ap[i].pci_size_low) >
entry->io_base) {
entry->io_base =
pci_ap[i].pci_phys_low +
pci_ap[i].pci_size_low;
}
break;
}
}
/*
* free the memory allocated by ddi_getlongprop
*/
kmem_free(pci_ap, length);
/*
* continue the walk to the next sibling to sum memory
*/
return (DDI_WALK_CONTINUE);
}
}
/*
* Make "parent" be the parent of the "child" dip
*/
static void
pcicfg_reparent_node(dev_info_t *child, dev_info_t *parent)
{
int circ;
dev_info_t *opdip;
ASSERT(i_ddi_node_state(child) <= DS_LINKED);
/*
* Unlink node from tree before reparenting
*/
opdip = ddi_get_parent(child);
ndi_devi_enter(opdip, &circ);
(void) i_ndi_unconfig_node(child, DS_PROTO, 0);
ndi_devi_exit(opdip, circ);
DEVI(child)->devi_parent = DEVI(parent);
DEVI(child)->devi_bus_ctl = DEVI(parent);
(void) ndi_devi_bind_driver(child, 0);
}
/*
* Return PCICFG_SUCCESS if device exists at the specified address.
* Return PCICFG_NODEVICE is no device exists at the specified address.
*/
int
pcicfg_config_setup(dev_info_t *dip, ddi_acc_handle_t *handle)
{
caddr_t cfgaddr;
ddi_device_acc_attr_t attr;
dev_info_t *anode;
int status;
int rlen;
pci_regspec_t *reg;
int ret = DDI_SUCCESS;
int16_t tmp;
/*
* Get the pci register spec from the node
*/
status = ddi_getlongprop(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, "reg",
(caddr_t)&reg, &rlen);
switch (status) {
case DDI_PROP_SUCCESS:
break;
case DDI_PROP_NO_MEMORY:
DEBUG0("reg present, but unable to get memory\n");
return (PCICFG_FAILURE);
default:
DEBUG0("no reg property\n");
return (PCICFG_FAILURE);
}
anode = dip;
DEBUG2("conf_map: dip=%p, anode=%p\n", dip, anode);
attr.devacc_attr_version = DDI_DEVICE_ATTR_V0;
attr.devacc_attr_endian_flags = DDI_STRUCTURE_LE_ACC;
attr.devacc_attr_dataorder = DDI_STRICTORDER_ACC;
if (ddi_regs_map_setup(anode, 0, &cfgaddr, 0, 0, &attr, handle)
!= DDI_SUCCESS) {
DEBUG0("Failed to setup registers\n");
kmem_free((caddr_t)reg, rlen);
return (PCICFG_FAILURE);
}
/*
* need to use DDI interfaces as the conf space is
* cannot be directly accessed by the host.
*/
tmp = (int16_t)ddi_get16(*handle, (uint16_t *)cfgaddr);
if ((tmp == (int16_t)0xffff) || (tmp == -1)) {
DEBUG1("NO DEVICEFOUND, read %x\n", tmp);
ret = PCICFG_NODEVICE;
} else {
if (tmp == 0) {
DEBUG0("Device Not Ready yet ?");
ret = PCICFG_NODEVICE;
} else {
DEBUG1("DEVICEFOUND, read %x\n", tmp);
ret = PCICFG_SUCCESS;
}
}
if (ret == PCICFG_NODEVICE)
ddi_regs_map_free(handle);
kmem_free((caddr_t)reg, rlen);
return (ret);
}
static void
pcicfg_config_teardown(ddi_acc_handle_t *handle)
{
(void) ddi_regs_map_free(handle);
}
static int
pcicfg_add_config_reg(dev_info_t *dip,
uint_t bus, uint_t device, uint_t func)
{
int reg[10] = { PCI_ADDR_CONFIG, 0, 0, 0, 0};
reg[0] = PCICFG_MAKE_REG_HIGH(bus, device, func, 0);
return (ndi_prop_update_int_array(DDI_DEV_T_NONE, dip, "reg", reg, 5));
}
static int
pcicfg_ari_configure(dev_info_t *dip)
{
if (pcie_ari_supported(dip) == PCIE_ARI_FORW_NOT_SUPPORTED)
return (DDI_FAILURE);
/*
* Until we have resource balancing, dynamically configure
* ARI functions without firmware assistamce.
*/
return (DDI_FAILURE);
}
#ifdef DEBUG
static void
debug(char *fmt, uintptr_t a1, uintptr_t a2, uintptr_t a3,
uintptr_t a4, uintptr_t a5)
{
if (pcicfg_debug > 1) {
prom_printf("pcicfg: ");
prom_printf(fmt, a1, a2, a3, a4, a5);
}
}
#endif
/*ARGSUSED*/
static uint8_t
pcicfg_get_nslots(dev_info_t *dip, ddi_acc_handle_t handle)
{
uint16_t cap_id_loc, slot_id_loc;
uint8_t num_slots = 0;
/* just depend on the pcie_cap for now. */
(void) PCI_CAP_LOCATE(handle, PCI_CAP_ID_PCI_E, &cap_id_loc);
(void) PCI_CAP_LOCATE(handle, PCI_CAP_ID_SLOT_ID, &slot_id_loc);
if (cap_id_loc != PCI_CAP_NEXT_PTR_NULL) {
if (pci_config_get8(handle, cap_id_loc + PCI_CAP_ID_REGS_OFF) &
PCIE_PCIECAP_SLOT_IMPL)
num_slots = 1;
} else /* not a PCIe switch/bridge. Must be a PCI-PCI[-X] bridge */
if (slot_id_loc != PCI_CAP_NEXT_PTR_NULL) {
uint8_t esr_reg = pci_config_get8(handle, slot_id_loc + 2);
num_slots = PCI_CAPSLOT_NSLOTS(esr_reg);
}
/* XXX - need to cover PCI-PCIe bridge with n slots */
return (num_slots);
}
/*ARGSUSED*/
static int
pcicfg_pcie_dev(dev_info_t *dip, ddi_acc_handle_t handle)
{
/* get parent device's device_type property */
char *device_type;
int val;
dev_info_t *pdip = ddi_get_parent(dip);
if (ddi_prop_lookup_string(DDI_DEV_T_ANY, pdip, DDI_PROP_DONTPASS,
"device_type", &device_type) != DDI_PROP_SUCCESS) {
DEBUG2("device_type property missing for %s#%d",
ddi_get_name(pdip), ddi_get_instance(pdip));
return (DDI_FAILURE);
}
DEBUG1("device_type=<%s>\n", device_type);
val = DDI_FAILURE;
if (strcmp(device_type, "pciex") == 0)
val = DDI_SUCCESS;
ddi_prop_free(device_type);
return (val);
}
static int
pcicfg_pcie_device_type(dev_info_t *dip, ddi_acc_handle_t handle)
{
int port_type = pcicfg_pcie_port_type(dip, handle);
DEBUG1("device port_type = %x\n", port_type);
/* No PCIe CAP regs, we are not PCIe device_type */
if (port_type < 0)
return (DDI_FAILURE);
/* check for all PCIe device_types */
if ((port_type == PCIE_PCIECAP_DEV_TYPE_UP) ||
(port_type == PCIE_PCIECAP_DEV_TYPE_DOWN) ||
(port_type == PCIE_PCIECAP_DEV_TYPE_ROOT) ||
(port_type == PCIE_PCIECAP_DEV_TYPE_PCI2PCIE))
return (DDI_SUCCESS);
return (DDI_FAILURE);
}
/*ARGSUSED*/
static int
pcicfg_pcie_port_type(dev_info_t *dip, ddi_acc_handle_t handle)
{
int port_type = -1;
uint16_t cap_loc;
/* Note: need to look at the port type information here */
(void) PCI_CAP_LOCATE(handle, PCI_CAP_ID_PCI_E, &cap_loc);
if (cap_loc != PCI_CAP_NEXT_PTR_NULL)
port_type = pci_config_get16(handle,
cap_loc + PCIE_PCIECAP) & PCIE_PCIECAP_DEV_TYPE_MASK;
return (port_type);
}
/*
* Return true if the devinfo node is in a PCI Express hierarchy.
*/
static boolean_t
is_pcie_fabric(dev_info_t *dip)
{
dev_info_t *root = ddi_root_node();
dev_info_t *pdip;
boolean_t found = B_FALSE;
char *bus;
/*
* Does this device reside in a pcie fabric ?
*/
for (pdip = dip; pdip && (pdip != root) && !found;
pdip = ddi_get_parent(pdip)) {
if (ddi_prop_lookup_string(DDI_DEV_T_ANY, pdip,
DDI_PROP_DONTPASS, "device_type", &bus) !=
DDI_PROP_SUCCESS)
break;
if (strcmp(bus, "pciex") == 0)
found = B_TRUE;
ddi_prop_free(bus);
}
return (found);
}