utxface.c revision 571909175b4f9a1ef15ec4afead6d6d463dbe760
/******************************************************************************
*
* Module Name: utxface - External interfaces for "global" ACPI functions
*
*****************************************************************************/
/******************************************************************************
*
* 1. Copyright Notice
*
* Some or all of this work - Copyright (c) 1999 - 2009, Intel Corp.
* All rights reserved.
*
* 2. License
*
* 2.1. This is your license from Intel Corp. under its intellectual property
* rights. You may have additional license terms from the party that provided
* you this software, covering your right to use that party's intellectual
* property rights.
*
* 2.2. Intel grants, free of charge, to any person ("Licensee") obtaining a
* copy of the source code appearing in this file ("Covered Code") an
* irrevocable, perpetual, worldwide license under Intel's copyrights in the
* base code distributed originally by Intel ("Original Intel Code") to copy,
* make derivatives, distribute, use and display any portion of the Covered
* Code in any form, with the right to sublicense such rights; and
*
* 2.3. Intel grants Licensee a non-exclusive and non-transferable patent
* license (with the right to sublicense), under only those claims of Intel
* patents that are infringed by the Original Intel Code, to make, use, sell,
* offer to sell, and import the Covered Code and derivative works thereof
* solely to the minimum extent necessary to exercise the above copyright
* license, and in no event shall the patent license extend to any additions
* to or modifications of the Original Intel Code. No other license or right
* is granted directly or by implication, estoppel or otherwise;
*
* The above copyright and patent license is granted only if the following
* conditions are met:
*
* 3. Conditions
*
* 3.1. Redistribution of Source with Rights to Further Distribute Source.
* Redistribution of source code of any substantial portion of the Covered
* Code or modification with rights to further distribute source must include
* the above Copyright Notice, the above License, this list of Conditions,
* and the following Disclaimer and Export Compliance provision. In addition,
* Licensee must cause all Covered Code to which Licensee contributes to
* contain a file documenting the changes Licensee made to create that Covered
* Code and the date of any change. Licensee must include in that file the
* documentation of any changes made by any predecessor Licensee. Licensee
* must include a prominent statement that the modification is derived,
* directly or indirectly, from Original Intel Code.
*
* 3.2. Redistribution of Source with no Rights to Further Distribute Source.
* Redistribution of source code of any substantial portion of the Covered
* Code or modification without rights to further distribute source must
* include the following Disclaimer and Export Compliance provision in the
* addition, Licensee may not authorize further sublicense of source of any
* portion of the Covered Code, and must include terms to the effect that the
* license from Licensee to its licensee is limited to the intellectual
* property embodied in the software Licensee provides to its licensee, and
* not to intellectual property embodied in modifications its licensee may
* make.
*
* 3.3. Redistribution of Executable. Redistribution in executable form of any
* substantial portion of the Covered Code or modification must reproduce the
* above Copyright Notice, and the following Disclaimer and Export Compliance
* distribution.
*
* 3.4. Intel retains all right, title, and interest in and to the Original
* Intel Code.
*
* 3.5. Neither the name Intel nor any other trademark owned or controlled by
* Intel shall be used in advertising or otherwise to promote the sale, use or
* other dealings in products derived from or relating to the Covered Code
* without prior written authorization from Intel.
*
* 4. Disclaimer and Export Compliance
*
* 4.1. INTEL MAKES NO WARRANTY OF ANY KIND REGARDING ANY SOFTWARE PROVIDED
* HERE. ANY SOFTWARE ORIGINATING FROM INTEL OR DERIVED FROM INTEL SOFTWARE
* IS PROVIDED "AS IS," AND INTEL WILL NOT PROVIDE ANY SUPPORT, ASSISTANCE,
* INSTALLATION, TRAINING OR OTHER SERVICES. INTEL WILL NOT PROVIDE ANY
* UPDATES, ENHANCEMENTS OR EXTENSIONS. INTEL SPECIFICALLY DISCLAIMS ANY
* IMPLIED WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT AND FITNESS FOR A
* PARTICULAR PURPOSE.
*
* 4.2. IN NO EVENT SHALL INTEL HAVE ANY LIABILITY TO LICENSEE, ITS LICENSEES
* OR ANY OTHER THIRD PARTY, FOR ANY LOST PROFITS, LOST DATA, LOSS OF USE OR
* COSTS OF PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES, OR FOR ANY INDIRECT,
* SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THIS AGREEMENT, UNDER ANY
* CAUSE OF ACTION OR THEORY OF LIABILITY, AND IRRESPECTIVE OF WHETHER INTEL
* HAS ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES. THESE LIMITATIONS
* SHALL APPLY NOTWITHSTANDING THE FAILURE OF THE ESSENTIAL PURPOSE OF ANY
* LIMITED REMEDY.
*
* 4.3. Licensee shall not export, either directly or indirectly, any of this
* software or system incorporating such software without first obtaining any
* required license or other approval from the U. S. Department of Commerce or
* any other agency or department of the United States Government. In the
* event Licensee exports any such software from the United States or
* re-exports any such software from a foreign destination, Licensee shall
* compliance with all laws, regulations, orders, or other restrictions of the
* U.S. Export Administration Regulations. Licensee agrees that neither it nor
* software, or service, directly or indirectly, to any country for which the
* United States government or any agency thereof requires an export license,
* other governmental approval, or letter of assurance, without first obtaining
* such license, approval or letter.
*
*****************************************************************************/
#define __UTXFACE_C__
#include "acpi.h"
#include "accommon.h"
#include "acevents.h"
#include "acnamesp.h"
#include "acdebug.h"
#include "actables.h"
#define _COMPONENT ACPI_UTILITIES
ACPI_MODULE_NAME ("utxface")
#ifndef ACPI_ASL_COMPILER
/*******************************************************************************
*
* FUNCTION: AcpiInitializeSubsystem
*
* PARAMETERS: None
*
* RETURN: Status
*
* DESCRIPTION: Initializes all global variables. This is the first function
* called, so any early initialization belongs here.
*
******************************************************************************/
void)
{
/* Initialize the OS-Dependent layer */
Status = AcpiOsInitialize ();
if (ACPI_FAILURE (Status))
{
}
/* Initialize all globals used by the subsystem */
Status = AcpiUtInitGlobals ();
if (ACPI_FAILURE (Status))
{
}
/* Create the default mutex objects */
Status = AcpiUtMutexInitialize ();
if (ACPI_FAILURE (Status))
{
}
/*
* Initialize the namespace manager and
* the root of the namespace tree
*/
Status = AcpiNsRootInitialize ();
if (ACPI_FAILURE (Status))
{
}
/* If configured, initialize the AML debugger */
}
/*******************************************************************************
*
* FUNCTION: AcpiEnableSubsystem
*
*
* RETURN: Status
*
* DESCRIPTION: Completes the subsystem initialization including hardware.
* Puts system into ACPI mode if it isn't already.
*
******************************************************************************/
{
/* Enable ACPI mode */
if (!(Flags & ACPI_NO_ACPI_ENABLE))
{
Status = AcpiEnable ();
if (ACPI_FAILURE (Status))
{
}
}
/*
* Obtain a permanent mapping for the FACS. This is required for the
* Global Lock and the Firmware Waking Vector
*/
Status = AcpiTbInitializeFacs ();
if (ACPI_FAILURE (Status))
{
}
/*
* Install the default OpRegion handlers. These are installed unless
* other handlers have already been installed via the
* InstallAddressSpaceHandler interface.
*/
if (!(Flags & ACPI_NO_ADDRESS_SPACE_INIT))
{
"[Init] Installing default address space handlers\n"));
if (ACPI_FAILURE (Status))
{
}
}
/*
* Initialize ACPI Event handling (Fixed and General Purpose)
*
* Note1: We must have the hardware and events initialized before we can
* execute any control methods safely. Any control method can require
* ACPI hardware support, so the hardware must be fully initialized before
* any method execution!
*
* Note2: Fixed events are initialized and enabled here. GPEs are
* initialized, but cannot be enabled until after the hardware is
* completely initialized (SCI and GlobalLock activated) and the various
* initialization control methods are run (_REG, _STA, _INI) on the
* entire namespace.
*/
if (!(Flags & ACPI_NO_EVENT_INIT))
{
"[Init] Initializing ACPI events\n"));
Status = AcpiEvInitializeEvents ();
if (ACPI_FAILURE (Status))
{
}
}
/*
* Install the SCI handler and Global Lock handler. This completes the
* hardware initialization.
*/
if (!(Flags & ACPI_NO_HANDLER_INIT))
{
if (ACPI_FAILURE (Status))
{
}
}
}
/*******************************************************************************
*
* FUNCTION: AcpiInitializeObjects
*
*
* RETURN: Status
*
* DESCRIPTION: Completes namespace initialization by initializing device
* objects and executing AML code for Regions, buffers, etc.
*
******************************************************************************/
{
/*
* Run all _REG methods
*
* Note: Any objects accessed by the _REG methods will be automatically
* initialized, even if they contain executable AML (see the call to
* AcpiNsInitializeObjects below).
*/
if (!(Flags & ACPI_NO_ADDRESS_SPACE_INIT))
{
"[Init] Executing _REG OpRegion methods\n"));
if (ACPI_FAILURE (Status))
{
}
}
/*
* Execute any module-level code that was detected during the table load
* phase. Although illegal since ACPI 2.0, there are many machines that
* contain this type of code. Each block of detected executable AML code
* outside of any control method is wrapped with a temporary control
* method object and placed on a global list. The methods on this list
* are executed below.
*/
/*
* Initialize the objects that remain uninitialized. This runs the
* executable AML that may be part of the declaration of these objects:
* OperationRegions, BufferFields, Buffers, and Packages.
*/
if (!(Flags & ACPI_NO_OBJECT_INIT))
{
"[Init] Completing Initialization of ACPI Objects\n"));
if (ACPI_FAILURE (Status))
{
}
}
/*
* Initialize all device objects in the namespace. This runs the device
* _STA and _INI methods.
*/
if (!(Flags & ACPI_NO_DEVICE_INIT))
{
"[Init] Initializing ACPI Devices\n"));
if (ACPI_FAILURE (Status))
{
}
}
/*
* Initialize the GPE blocks defined in the FADT (GPE block 0 and 1).
* The runtime GPEs are enabled here.
*
* This is where the _PRW methods are executed for the GPEs. These
* methods can only be executed after the SCI and Global Lock handlers are
* installed and initialized.
*
* GPEs can only be enabled after the _REG, _STA, and _INI methods have
* been run. This ensures that all Operation Regions and all Devices have
* been initialized and are ready.
*/
if (!(Flags & ACPI_NO_EVENT_INIT))
{
Status = AcpiEvInstallFadtGpes ();
if (ACPI_FAILURE (Status))
{
return (Status);
}
}
/*
* Empty the caches (delete the cached objects) on the assumption that
* the table load filled them up more than they will be at runtime --
* thus wasting non-paged memory.
*/
Status = AcpiPurgeCachedObjects ();
}
#endif
/*******************************************************************************
*
* FUNCTION: AcpiTerminate
*
* PARAMETERS: None
*
* RETURN: Status
*
* DESCRIPTION: Shutdown the ACPICA subsystem and release all resources.
*
******************************************************************************/
void)
{
/* Just exit if subsystem is already shutdown */
if (AcpiGbl_Shutdown)
{
}
/* Subsystem appears active, go ahead and shut it down */
AcpiGbl_StartupFlags = 0;
/* Terminate the AML Debugger if present */
/* Shutdown and free all resources */
/* Free the mutex objects */
#ifdef ACPI_DEBUGGER
/* Shut down the debugger */
AcpiDbTerminate ();
#endif
/* Now we can shutdown the OS-dependent layer */
Status = AcpiOsTerminate ();
}
#ifndef ACPI_ASL_COMPILER
/*******************************************************************************
*
* FUNCTION: AcpiSubsystemStatus
*
* PARAMETERS: None
*
* RETURN: Status of the ACPI subsystem
*
* DESCRIPTION: Other drivers that use the ACPI subsystem should call this
* before making any other calls, to ensure the subsystem
* initialized successfully.
*
******************************************************************************/
void)
{
{
return (AE_OK);
}
else
{
return (AE_ERROR);
}
}
/*******************************************************************************
*
* FUNCTION: AcpiGetSystemInfo
*
* PARAMETERS: OutBuffer - A buffer to receive the resources for the
* device
*
* RETURN: Status - the status of the call
*
* DESCRIPTION: This function is called to get information about the current
* state of the ACPI subsystem. It will return system information
* in the OutBuffer.
*
* If the function fails an appropriate status will be returned
* and the value of OutBuffer is undefined.
*
******************************************************************************/
{
/* Parameter validation */
if (ACPI_FAILURE (Status))
{
}
if (ACPI_FAILURE (Status))
{
}
/*
* Populate the return buffer
*/
/* System flags (ACPI capabilities) */
/* Timer resolution - 24 or 32 bits */
{
}
else
{
}
/* Clear the reserved fields */
/* Current debug levels */
}
/*******************************************************************************
*
* FUNCTION: AcpiGetStatistics
*
* PARAMETERS: Stats - Where the statistics are returned
*
* RETURN: Status - the status of the call
*
* DESCRIPTION: Get the contents of the various system counters
*
******************************************************************************/
{
/* Parameter validation */
if (!Stats)
{
}
/* Various interrupt-based event counters */
sizeof (AcpiFixedEventCount));
/* Other counters */
}
/*****************************************************************************
*
* FUNCTION: AcpiInstallInitializationHandler
*
* PARAMETERS: Handler - Callback procedure
* Function - Not (currently) used, see below
*
* RETURN: Status
*
* DESCRIPTION: Install an initialization handler
*
* TBD: When a second function is added, must save the Function also.
*
****************************************************************************/
{
if (!Handler)
{
return (AE_BAD_PARAMETER);
}
if (AcpiGbl_InitHandler)
{
return (AE_ALREADY_EXISTS);
}
return AE_OK;
}
/*****************************************************************************
*
* FUNCTION: AcpiPurgeCachedObjects
*
* PARAMETERS: None
*
* RETURN: Status
*
* DESCRIPTION: Empty all caches (delete the cached objects)
*
****************************************************************************/
void)
{
(void) AcpiOsPurgeCache (AcpiGbl_StateCache);
(void) AcpiOsPurgeCache (AcpiGbl_OperandCache);
(void) AcpiOsPurgeCache (AcpiGbl_PsNodeCache);
(void) AcpiOsPurgeCache (AcpiGbl_PsNodeExtCache);
}
#endif /* ACPI_ASL_COMPILER */