machparam.h revision 7c478bd95313f5f23a4c958a745db2134aa03244
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License, Version 1.0 only
* (the "License"). You may not use this file except in compliance
* with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright 2004 Sun Microsystems, Inc. All rights reserved.
* Use is subject to license terms.
*/
/* Copyright (c) 1988 AT&T */
/* All Rights Reserved */
#ifndef _SYS_MACHPARAM_H
#define _SYS_MACHPARAM_H
#pragma ident "%Z%%M% %I% %E% SMI"
#include <sys/types.h>
#ifdef __cplusplus
extern "C" {
#endif
#ifndef _ASM
#define ADDRESS_C(c) c ## ul
#else /* _ASM */
#define ADDRESS_C(c) (c)
#endif /* _ASM */
/*
* Machine dependent parameters and limits - PC version.
*/
#define NCPU 21
/*
* The value defined below could grow to 16. hat structure and
* page_t have room for 16 nodes.
*/
#define MAXNODES 4
#define NUMA_NODEMASK 0x0f
/*
* Define the FPU symbol if we could run on a machine with an external
* FPU (i.e. not integrated with the normal machine state like the vax).
*
* The fpu is defined in the architecture manual, and the kernel hides
* its absence if it is not present, that's pretty integrated, no?
*/
/* supported page sizes */
#define MMU_PAGE_SIZES 2
/*
* MMU_PAGES* describes the physical page size used by the mapping hardware.
* PAGES* describes the logical page size used by the system.
*/
#define MMU_PAGESIZE 0x1000 /* 4096 bytes */
#define MMU_PAGESHIFT 12 /* log2(MMU_PAGESIZE) */
#define MMU_PAGEOFFSET (MMU_PAGESIZE-1) /* Mask of address bits in page */
#define MMU_PAGEMASK (~MMU_PAGEOFFSET)
#define PAGESIZE 0x1000 /* All of the above, for logical */
#define PAGESHIFT 12
#define PAGEOFFSET (PAGESIZE - 1)
#define PAGEMASK (~PAGEOFFSET)
/*
* DATA_ALIGN is used to define the alignment of the Unix data segment.
*/
#define DATA_ALIGN PAGESIZE
/*
* DEFAULT KERNEL THREAD stack size.
*/
#if defined(__amd64)
#define DEFAULTSTKSZ (5 * PAGESIZE)
#elif defined(__i386)
#define DEFAULTSTKSZ (2 * PAGESIZE)
#endif
/*
* KERNELBASE is the virtual address at which the kernel segments start in
* all contexts.
*
* KERNELBASE is not fixed on 32-bit systems. The value of KERNELBASE can
* change with installed memory and the eprom variable 'eprom_kernelbase'.
* This value is fixed on 64-bit systems.
*
* common/conf/param.c requires a compile time defined value for KERNELBASE
* which it saves in the variable _kernelbase. If kernelbase is modifed on
* a 32-bit system, _kernelbase will be updated with the new value in
* i86pc/os/startup.c.
*
* i86 and i86pc files use kernelbase instead of KERNELBASE, which is
* initialized in i86pc/os/startup.c.
*/
#if defined(__amd64)
#define KERNELBASE ADDRESS_C(0xfffffd8000000000)
/*
* Size of the unmapped "red zone" at the very bottom of the kernel's
* address space. Corresponds to 1 slot in the toplevel pagetable.
*/
#define KERNEL_REDZONE_SIZE ((uintptr_t)1 << 39)
/*
* Base of 'core' heap area, which is used for kernel and module text/data
* that must be within a 2GB range to allow for rip-relative addressing.
*
* XX64: because vmx and boot cannot be trusted to stay in a 1GB playpen at
* the bottom of the upper 4GB range, we need to restrict the core heap to
* the top 1GB for now.
*/
#define COREHEAP_BASE ADDRESS_C(0xffffffffc0000000)
/*
* Beginning of the segkpm window
*/
#define SEGKPM_BASE ADDRESS_C(0xfffffe0000000000)
/*
* default and boundary sizes for segkp
*/
#define SEGKPDEFSIZE (2L * 1024L * 1024L * 1024L) /* 2G */
#define SEGKPMAXSIZE (8L * 1024L * 1024L * 1024L) /* 8G */
#define SEGKPMINSIZE (200L * 1024 * 1024L) /* 200M */
/*
* Boot (or, more precisely, vmx) maps most pages twice - once in the
* bottom 2GB of memory and once in the bottom 2GB of the topmost 4GB.
* When boot is unmapped this range is available to the kernel, but until
* then we have to leave it untouched.
*/
#define BOOT_DOUBLEMAP_BASE ADDRESS_C(0xffffffff00000000)
#define BOOT_DOUBLEMAP_SIZE ADDRESS_C(0x80000000)
/*
* VMWare works best if we don't use the top 64Meg of memory for amd64.
* Set KERNEL_TEXT to top_o_memory - 64Meg - 8 Meg for 8Meg of nucleus pages.
*/
#define PROMSTART ADDRESS_C(0xffc00000)
#define KERNEL_TEXT ADDRESS_C(0xfffffffffb800000)
/*
* Define upper limit on user address space
*
* In amd64, the upper limit on a 64-bit user address space is 1 large page
* (2MB) below kernelbase. The upper limit for a 32-bit user address space
* is 1 small page (4KB) below the top of the 32-bit range. The 64-bit
* limit give dtrace the red zone it needs below kernelbase. The 32-bit
* limit gives us a small red zone to detect address-space overruns in a
* user program.
*/
#define USERLIMIT ADDRESS_C(0xfffffd7fffe00000)
#ifdef bug_5074717_is_fixed
#define USERLIMIT32 ADDRESS_C(0xfffff000)
#else
#define USERLIMIT32 ADDRESS_C(0xfefff000)
#endif
#elif defined(__i386)
#ifdef DEBUG
#define KERNELBASE ADDRESS_C(0xc8000000)
#else
#define KERNELBASE ADDRESS_C(0xd4000000)
#endif
#define KERNELBASE_MAX ADDRESS_C(0xe0000000)
/*
* The i386 ABI requires that the user address space be at least 3Gb
* in size. KERNELBASE_ABI_MIN is used as the default KERNELBASE for
* physical memory configurations > 4gb.
*/
#define KERNELBASE_ABI_MIN ADDRESS_C(0xc0000000)
/*
* Size of the unmapped "red zone" at the very bottom of the kernel's
* address space. Since segmap start immediately above the red zone, this
* needs to be MAXBSIZE aligned.
*/
#define KERNEL_REDZONE_SIZE MAXBSIZE
/*
* This is the last 4MB of the 4G address space. Some psm modules
* need this region of virtual address space mapped 1-1
*/
#define PROMSTART ADDRESS_C(0xffc00000)
#define KERNEL_TEXT ADDRESS_C(0xfe800000)
/*
* Define upper limit on user address space
*/
#define USERLIMIT KERNELBASE
#define USERLIMIT32 USERLIMIT
#endif /* __i386 */
#if !defined(_KADB)
extern uintptr_t kernelbase, segkmap_start, segmapsize;
#endif
/*
* ARGSBASE is the base virtual address of the range which
* the kernel uses to map the arguments for exec.
*/
#define ARGSBASE PROMSTART
/*
* reserve space for modules
*/
#define MODTEXT (1024 * 1024 * 2)
#define MODDATA (1024 * 300)
/*
* The heap has a region allocated from it of HEAPTEXT_SIZE bytes specifically
* for module text.
*/
#define HEAPTEXT_SIZE (64 * 1024 * 1024) /* bytes */
/*
* Size of a kernel threads stack. It must be a whole number of pages
* since the segment it comes from will only allocate space in pages.
*/
#define T_STACKSZ 2*PAGESIZE
/*
* Size of a cpu startup thread stack. (It must be a whole number of pages
* since the containing segment only allocates space in pages.)
*/
#define STARTUP_STKSZ 3*PAGESIZE
/*
* Bus types
*/
#define BTISA 1
#define BTEISA 2
#define BTMCA 3
#ifdef __cplusplus
}
#endif
#endif /* _SYS_MACHPARAM_H */