i86pc/os/microcode.c

	microcode.c revision f34a71784df3fbc5d1227a7b6201fd318ad1667e
/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License (the "License").
 * You may not use this file except in compliance with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or http://www.opensolaris.org/os/licensing.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */

/*
 * Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
 * Use is subject to license terms.
 */

#include <sys/asm_linkage.h>
#include <sys/bootconf.h>
#include <sys/cpuvar.h>
#include <sys/cmn_err.h>
#include <sys/controlregs.h>
#include <sys/debug.h>
#include <sys/kobj.h>
#include <sys/kobj_impl.h>
#include <sys/machsystm.h>
#include <sys/param.h>
#include <sys/machparam.h>
#include <sys/promif.h>
#include <sys/sysmacros.h>
#include <sys/systm.h>
#include <sys/types.h>
#include <sys/thread.h>
#include <sys/ucode.h>
#include <sys/x86_archext.h>
#include <sys/x_call.h>
#ifdef  __xpv
#include <sys/hypervisor.h>
#endif

/*
 * AMD-specific equivalence table
 */
static ucode_eqtbl_amd_t *ucode_eqtbl_amd;

/*
 * mcpu_ucode_info for the boot CPU.  Statically allocated.
 */
static struct cpu_ucode_info cpu_ucode_info0;

static ucode_file_t ucodefile;

static void* ucode_zalloc(processorid_t, size_t);
static void ucode_free(processorid_t, void *, size_t);

static int ucode_capable_amd(cpu_t *);
static int ucode_capable_intel(cpu_t *);

static ucode_errno_t ucode_extract_amd(ucode_update_t *, uint8_t *, int);
static ucode_errno_t ucode_extract_intel(ucode_update_t *, uint8_t *,
    int);

static void ucode_file_reset_amd(ucode_file_t *, processorid_t);
static void ucode_file_reset_intel(ucode_file_t *, processorid_t);

static uint32_t ucode_load_amd(ucode_file_t *, cpu_ucode_info_t *, cpu_t *);
static uint32_t ucode_load_intel(ucode_file_t *, cpu_ucode_info_t *, cpu_t *);

#ifdef  __xpv
static void ucode_load_xpv(ucode_update_t *);
static void ucode_chipset_amd(uint8_t *, int);
#endif

static int ucode_equiv_cpu_amd(cpu_t *, uint16_t *);

static ucode_errno_t ucode_locate_amd(cpu_t *, cpu_ucode_info_t *,
    ucode_file_t *);
static ucode_errno_t ucode_locate_intel(cpu_t *, cpu_ucode_info_t *,
    ucode_file_t *);

#ifndef __xpv
static ucode_errno_t ucode_match_amd(uint16_t, cpu_ucode_info_t *,
    ucode_file_amd_t *, int);
#endif
static ucode_errno_t ucode_match_intel(int, cpu_ucode_info_t *,
    ucode_header_intel_t *, ucode_ext_table_intel_t *);

static void ucode_read_rev_amd(cpu_ucode_info_t *);
static void ucode_read_rev_intel(cpu_ucode_info_t *);

static const struct ucode_ops ucode_amd = {
    MSR_AMD_PATCHLOADER,
    ucode_capable_amd,
    ucode_file_reset_amd,
    ucode_read_rev_amd,
    ucode_load_amd,
    ucode_validate_amd,
    ucode_extract_amd,
    ucode_locate_amd
};

static const struct ucode_ops ucode_intel = {
    MSR_INTC_UCODE_WRITE,
    ucode_capable_intel,
    ucode_file_reset_intel,
    ucode_read_rev_intel,
    ucode_load_intel,
    ucode_validate_intel,
    ucode_extract_intel,
    ucode_locate_intel
};

const struct ucode_ops *ucode;

static const char ucode_failure_fmt[] =
    "cpu%d: failed to update microcode from version 0x%x to 0x%x\n";
static const char ucode_success_fmt[] =
    "?cpu%d: microcode has been updated from version 0x%x to 0x%x\n";

/*
 * Force flag.  If set, the first microcode binary that matches
 * signature and platform id will be used for microcode update,
 * regardless of version.  Should only be used for debugging.
 */
int ucode_force_update = 0;

/*
 * Allocate space for mcpu_ucode_info in the machcpu structure
 * for all non-boot CPUs.
 */
void
ucode_alloc_space(cpu_t *cp)
{
    ASSERT(cp->cpu_id != 0);
    cp->cpu_m.mcpu_ucode_info =
        kmem_zalloc(sizeof (*cp->cpu_m.mcpu_ucode_info), KM_SLEEP);
}

void
ucode_free_space(cpu_t *cp)
{
    ASSERT(cp->cpu_id != 0);
    kmem_free(cp->cpu_m.mcpu_ucode_info,
        sizeof (*cp->cpu_m.mcpu_ucode_info));
}

/*
 * Called when we are done with microcode update on all processors to free up
 * space allocated for the microcode file.
 */
void
ucode_cleanup()
{
    ASSERT(ucode);

    ucode->file_reset(&ucodefile, -1);
}

/*
 * Allocate/free a buffer used to hold ucode data. Space for the boot CPU is
 * allocated with BOP_ALLOC() and does not require a free.
 */
static void*
ucode_zalloc(processorid_t id, size_t size)
{
    if (id)
        return (kmem_zalloc(size, KM_NOSLEEP));

    /* BOP_ALLOC() failure results in panic */
    return (BOP_ALLOC(bootops, NULL, size, MMU_PAGESIZE));
}

static void
ucode_free(processorid_t id, void* buf, size_t size)
{
    if (id)
        kmem_free(buf, size);
}

/*
 * Check whether or not a processor is capable of microcode operations
 * Returns 1 if it is capable, 0 if not.
 *
 * At this point we only support microcode update for:
 * - Intel processors family 6 and above, and
 * - AMD processors family 0x10 and above.
 *
 * We also assume that we don't support a mix of Intel and
 * AMD processors in the same box.
 *
 * An i86xpv guest domain can't update the microcode.
 */
/*ARGSUSED*/
static int
ucode_capable_amd(cpu_t *cp)
{
    int hwenv = get_hwenv();

    if (hwenv == HW_XEN_HVM || (hwenv == HW_XEN_PV && !is_controldom())) {
        return (0);
    }
    return (cpuid_getfamily(cp) >= 0x10);
}

static int
ucode_capable_intel(cpu_t *cp)
{
    int hwenv = get_hwenv();

    if (hwenv == HW_XEN_HVM || (hwenv == HW_XEN_PV && !is_controldom())) {
        return (0);
    }
    return (cpuid_getfamily(cp) >= 6);
}

/*
 * Called when it is no longer necessary to keep the microcode around,
 * or when the cached microcode doesn't match the CPU being processed.
 */
static void
ucode_file_reset_amd(ucode_file_t *ufp, processorid_t id)
{
    ucode_file_amd_t *ucodefp = ufp->amd;

    if (ucodefp == NULL)
        return;

    ucode_free(id, ucodefp, sizeof (ucode_file_amd_t));
    ufp->amd = NULL;
}

static void
ucode_file_reset_intel(ucode_file_t *ufp, processorid_t id)
{
    ucode_file_intel_t *ucodefp = &ufp->intel;
    int total_size, body_size;

    if (ucodefp == NULL || ucodefp->uf_header == NULL)
        return;

    total_size = UCODE_TOTAL_SIZE_INTEL(ucodefp->uf_header->uh_total_size);
    body_size = UCODE_BODY_SIZE_INTEL(ucodefp->uf_header->uh_body_size);
    if (ucodefp->uf_body) {
        ucode_free(id, ucodefp->uf_body, body_size);
        ucodefp->uf_body = NULL;
    }

    if (ucodefp->uf_ext_table) {
        int size = total_size - body_size - UCODE_HEADER_SIZE_INTEL;

        ucode_free(id, ucodefp->uf_ext_table, size);
        ucodefp->uf_ext_table = NULL;
    }

    ucode_free(id, ucodefp->uf_header, UCODE_HEADER_SIZE_INTEL);
    ucodefp->uf_header = NULL;
}

/*
 * Find the equivalent CPU id in the equivalence table.
 */
static int
ucode_equiv_cpu_amd(cpu_t *cp, uint16_t *eq_sig)
{
    char name[MAXPATHLEN];
    intptr_t fd;
    int count;
    int offset = 0, cpi_sig = cpuid_getsig(cp);
    ucode_eqtbl_amd_t *eqtbl = ucode_eqtbl_amd;

    (void) snprintf(name, MAXPATHLEN, "/%s/%s/equivalence-table",
        UCODE_INSTALL_PATH, cpuid_getvendorstr(cp));

    /*
     * No kmem_zalloc() etc. available on boot cpu.
     */
    if (cp->cpu_id == 0) {
        if ((fd = kobj_open(name)) == -1)
            return (EM_OPENFILE);
        /* ucode_zalloc() cannot fail on boot cpu */
        eqtbl = ucode_zalloc(cp->cpu_id, sizeof (*eqtbl));
        ASSERT(eqtbl);
        do {
            count = kobj_read(fd, (int8_t *)eqtbl,
                sizeof (*eqtbl), offset);
            if (count != sizeof (*eqtbl)) {
                (void) kobj_close(fd);
                return (EM_HIGHERREV);
            }
            offset += count;
        } while (eqtbl->ue_inst_cpu && eqtbl->ue_inst_cpu != cpi_sig);
        (void) kobj_close(fd);
    }

    /*
     * If not already done, load the equivalence table.
     * Not done on boot CPU.
     */
    if (eqtbl == NULL) {
        struct _buf *eq;
        uint64_t size;

        if ((eq = kobj_open_file(name)) == (struct _buf *)-1)
            return (EM_OPENFILE);

        if (kobj_get_filesize(eq, &size) < 0) {
            kobj_close_file(eq);
            return (EM_OPENFILE);
        }

        ucode_eqtbl_amd = kmem_zalloc(size, KM_NOSLEEP);
        if (ucode_eqtbl_amd == NULL) {
            kobj_close_file(eq);
            return (EM_NOMEM);
        }

        count = kobj_read_file(eq, (char *)ucode_eqtbl_amd, size, 0);
        kobj_close_file(eq);

        if (count != size)
            return (EM_FILESIZE);
    }

    /* Get the equivalent CPU id. */
    if (cp->cpu_id)
        for (eqtbl = ucode_eqtbl_amd;
            eqtbl->ue_inst_cpu && eqtbl->ue_inst_cpu != cpi_sig;
            eqtbl++)
            ;

    *eq_sig = eqtbl->ue_equiv_cpu;

    /* No equivalent CPU id found, assume outdated microcode file. */
    if (*eq_sig == 0)
        return (EM_HIGHERREV);

    return (EM_OK);
}

/*
 * xVM cannot check for the presence of PCI devices. Look for chipset-
 * specific microcode patches in the container file and disable them
 * by setting their CPU revision to an invalid value.
 */
#ifdef __xpv
static void
ucode_chipset_amd(uint8_t *buf, int size)
{
    ucode_header_amd_t *uh;
    uint32_t *ptr = (uint32_t *)buf;
    int len = 0;

    /* skip to first microcode patch */
    ptr += 2; len = *ptr++; ptr += len >> 2; size -= len;

    while (size >= sizeof (ucode_header_amd_t) + 8) {
        ptr++; len = *ptr++;
        uh = (ucode_header_amd_t *)ptr;
        ptr += len >> 2; size -= len;

        if (uh->uh_nb_id) {
            cmn_err(CE_WARN, "ignoring northbridge-specific ucode: "
                "chipset id %x, revision %x",
                uh->uh_nb_id, uh->uh_nb_rev);
            uh->uh_cpu_rev = 0xffff;
        }

        if (uh->uh_sb_id) {
            cmn_err(CE_WARN, "ignoring southbridge-specific ucode: "
                "chipset id %x, revision %x",
                uh->uh_sb_id, uh->uh_sb_rev);
            uh->uh_cpu_rev = 0xffff;
        }
    }
}
#endif

/*
 * Populate the ucode file structure from microcode file corresponding to
 * this CPU, if exists.
 *
 * Return EM_OK on success, corresponding error code on failure.
 */
/*ARGSUSED*/
static ucode_errno_t
ucode_locate_amd(cpu_t *cp, cpu_ucode_info_t *uinfop, ucode_file_t *ufp)
{
    char name[MAXPATHLEN];
    intptr_t fd;
    int count, rc;
    ucode_file_amd_t *ucodefp = ufp->amd;

#ifndef __xpv
    uint16_t eq_sig = 0;
    int i;

    /* get equivalent CPU id */
    if ((rc = ucode_equiv_cpu_amd(cp, &eq_sig)) != EM_OK)
        return (rc);

    /*
     * Allocate a buffer for the microcode patch. If the buffer has been
     * allocated before, check for a matching microcode to avoid loading
     * the file again.
     */
    if (ucodefp == NULL)
        ucodefp = ucode_zalloc(cp->cpu_id, sizeof (*ucodefp));
    else if (ucode_match_amd(eq_sig, uinfop, ucodefp, sizeof (*ucodefp))
        == EM_OK)
        return (EM_OK);

    if (ucodefp == NULL)
        return (EM_NOMEM);

    ufp->amd = ucodefp;

    /*
     * Find the patch for this CPU. The patch files are named XXXX-YY, where
     * XXXX is the equivalent CPU id and YY is the running patch number.
     * Patches specific to certain chipsets are guaranteed to have lower
     * numbers than less specific patches, so we can just load the first
     * patch that matches.
     */

    for (i = 0; i < 0xff; i++) {
        (void) snprintf(name, MAXPATHLEN, "/%s/%s/%04X-%02X",
            UCODE_INSTALL_PATH, cpuid_getvendorstr(cp), eq_sig, i);
        if ((fd = kobj_open(name)) == -1)
            return (EM_NOMATCH);
        count = kobj_read(fd, (char *)ucodefp, sizeof (*ucodefp), 0);
        (void) kobj_close(fd);

        if (ucode_match_amd(eq_sig, uinfop, ucodefp, count) == EM_OK)
            return (EM_OK);
    }
    return (EM_NOMATCH);
#else
    int size = 0;
    char c;

    /*
     * The xVM case is special. To support mixed-revision systems, the
     * hypervisor will choose which patch to load for which CPU, so the
     * whole microcode patch container file will have to be loaded.
     *
     * Since this code is only run on the boot cpu, we don't have to care
     * about failing ucode_zalloc() or freeing allocated memory.
     */
    if (cp->cpu_id != 0)
        return (EM_INVALIDARG);

    (void) snprintf(name, MAXPATHLEN, "/%s/%s/container",
        UCODE_INSTALL_PATH, cpuid_getvendorstr(cp));

    if ((fd = kobj_open(name)) == -1)
        return (EM_OPENFILE);

    /* get the file size by counting bytes */
    do {
        count = kobj_read(fd, &c, 1, size);
        size += count;
    } while (count);

    ucodefp = ucode_zalloc(cp->cpu_id, sizeof (*ucodefp));
    ASSERT(ucodefp);
    ufp->amd = ucodefp;

    ucodefp->usize = size;
    ucodefp->ucodep = ucode_zalloc(cp->cpu_id, size);
    ASSERT(ucodefp->ucodep);

    /* load the microcode patch container file */
    count = kobj_read(fd, (char *)ucodefp->ucodep, size, 0);
    (void) kobj_close(fd);

    if (count != size)
        return (EM_FILESIZE);

    /* make sure the container file is valid */
    rc = ucode->validate(ucodefp->ucodep, ucodefp->usize);

    if (rc != EM_OK)
        return (rc);

    /* disable chipset-specific patches */
    ucode_chipset_amd(ucodefp->ucodep, ucodefp->usize);

    return (EM_OK);
#endif
}

static ucode_errno_t
ucode_locate_intel(cpu_t *cp, cpu_ucode_info_t *uinfop, ucode_file_t *ufp)
{
    char        name[MAXPATHLEN];
    intptr_t    fd;
    int     count;
    int     header_size = UCODE_HEADER_SIZE_INTEL;
    int     cpi_sig = cpuid_getsig(cp);
    ucode_errno_t   rc = EM_OK;
    ucode_file_intel_t *ucodefp = &ufp->intel;

    ASSERT(ucode);

    /*
     * If the microcode matches the CPU we are processing, use it.
     */
    if (ucode_match_intel(cpi_sig, uinfop, ucodefp->uf_header,
        ucodefp->uf_ext_table) == EM_OK && ucodefp->uf_body != NULL) {
        return (EM_OK);
    }

    /*
     * Look for microcode file with the right name.
     */
    (void) snprintf(name, MAXPATHLEN, "/%s/%s/%08X-%02X",
        UCODE_INSTALL_PATH, cpuid_getvendorstr(cp), cpi_sig,
        uinfop->cui_platid);
    if ((fd = kobj_open(name)) == -1) {
        return (EM_OPENFILE);
    }

    /*
     * We found a microcode file for the CPU we are processing,
     * reset the microcode data structure and read in the new
     * file.
     */
    ucode->file_reset(ufp, cp->cpu_id);

    ucodefp->uf_header = ucode_zalloc(cp->cpu_id, header_size);
    if (ucodefp->uf_header == NULL)
        return (EM_NOMEM);

    count = kobj_read(fd, (char *)ucodefp->uf_header, header_size, 0);

    switch (count) {
    case UCODE_HEADER_SIZE_INTEL: {

        ucode_header_intel_t    *uhp = ucodefp->uf_header;
        uint32_t    offset = header_size;
        int     total_size, body_size, ext_size;
        uint32_t    sum = 0;

        /*
         * Make sure that the header contains valid fields.
         */
        if ((rc = ucode_header_validate_intel(uhp)) == EM_OK) {
            total_size = UCODE_TOTAL_SIZE_INTEL(uhp->uh_total_size);
            body_size = UCODE_BODY_SIZE_INTEL(uhp->uh_body_size);
            ucodefp->uf_body = ucode_zalloc(cp->cpu_id, body_size);
            if (ucodefp->uf_body == NULL) {
                rc = EM_NOMEM;
                break;
            }

            if (kobj_read(fd, (char *)ucodefp->uf_body,
                body_size, offset) != body_size)
                rc = EM_FILESIZE;
        }

        if (rc)
            break;

        sum = ucode_checksum_intel(0, header_size,
            (uint8_t *)ucodefp->uf_header);
        if (ucode_checksum_intel(sum, body_size, ucodefp->uf_body)) {
            rc = EM_CHECKSUM;
            break;
        }

        /*
         * Check to see if there is extended signature table.
         */
        offset = body_size + header_size;
        ext_size = total_size - offset;

        if (ext_size <= 0)
            break;

        ucodefp->uf_ext_table = ucode_zalloc(cp->cpu_id, ext_size);
        if (ucodefp->uf_ext_table == NULL) {
            rc = EM_NOMEM;
            break;
        }

        if (kobj_read(fd, (char *)ucodefp->uf_ext_table,
            ext_size, offset) != ext_size) {
            rc = EM_FILESIZE;
        } else if (ucode_checksum_intel(0, ext_size,
            (uint8_t *)(ucodefp->uf_ext_table))) {
            rc = EM_CHECKSUM;
        } else {
            int i;

            ext_size -= UCODE_EXT_TABLE_SIZE_INTEL;
            for (i = 0; i < ucodefp->uf_ext_table->uet_count;
                i++) {
                if (ucode_checksum_intel(0,
                    UCODE_EXT_SIG_SIZE_INTEL,
                    (uint8_t *)(&(ucodefp->uf_ext_table->
                    uet_ext_sig[i])))) {
                    rc = EM_CHECKSUM;
                    break;
                }
            }
        }
        break;
    }

    default:
        rc = EM_FILESIZE;
        break;
    }

    kobj_close(fd);

    if (rc != EM_OK)
        return (rc);

    rc = ucode_match_intel(cpi_sig, uinfop, ucodefp->uf_header,
        ucodefp->uf_ext_table);

    return (rc);
}

#ifndef __xpv
static ucode_errno_t
ucode_match_amd(uint16_t eq_sig, cpu_ucode_info_t *uinfop,
    ucode_file_amd_t *ucodefp, int size)
{
    ucode_header_amd_t *uh;

    if (ucodefp == NULL || size < sizeof (ucode_header_amd_t))
        return (EM_NOMATCH);

    /*
     * Don't even think about loading patches that would require code
     * execution.
     */
    if (size > offsetof(ucode_file_amd_t, uf_code_present) &&
        ucodefp->uf_code_present)
        return (EM_NOMATCH);

    uh = &ucodefp->uf_header;

    if (eq_sig != uh->uh_cpu_rev)
        return (EM_NOMATCH);

    if (uh->uh_nb_id) {
        cmn_err(CE_WARN, "ignoring northbridge-specific ucode: "
            "chipset id %x, revision %x", uh->uh_nb_id, uh->uh_nb_rev);
        return (EM_NOMATCH);
    }

    if (uh->uh_sb_id) {
        cmn_err(CE_WARN, "ignoring southbridge-specific ucode: "
            "chipset id %x, revision %x", uh->uh_sb_id, uh->uh_sb_rev);
        return (EM_NOMATCH);
    }

    if (uh->uh_patch_id <= uinfop->cui_rev)
        return (EM_HIGHERREV);

    return (EM_OK);
}
#endif

/*
 * Returns 1 if the microcode is for this processor; 0 otherwise.
 */
static ucode_errno_t
ucode_match_intel(int cpi_sig, cpu_ucode_info_t *uinfop,
    ucode_header_intel_t *uhp, ucode_ext_table_intel_t *uetp)
{
    if (uhp == NULL)
        return (EM_NOMATCH);

    if (UCODE_MATCH_INTEL(cpi_sig, uhp->uh_signature,
        uinfop->cui_platid, uhp->uh_proc_flags)) {

        if (uinfop->cui_rev >= uhp->uh_rev && !ucode_force_update)
            return (EM_HIGHERREV);

        return (EM_OK);
    }

    if (uetp != NULL) {
        int i;

        for (i = 0; i < uetp->uet_count; i++) {
            ucode_ext_sig_intel_t *uesp;

            uesp = &uetp->uet_ext_sig[i];

            if (UCODE_MATCH_INTEL(cpi_sig, uesp->ues_signature,
                uinfop->cui_platid, uesp->ues_proc_flags)) {

                if (uinfop->cui_rev >= uhp->uh_rev &&
                    !ucode_force_update)
                    return (EM_HIGHERREV);

                return (EM_OK);
            }
        }
    }

    return (EM_NOMATCH);
}

/*ARGSUSED*/
static int
ucode_write(xc_arg_t arg1, xc_arg_t unused2, xc_arg_t unused3)
{
    ucode_update_t *uusp = (ucode_update_t *)arg1;
    cpu_ucode_info_t *uinfop = CPU->cpu_m.mcpu_ucode_info;

    ASSERT(ucode);
    ASSERT(uusp->ucodep);

#ifndef __xpv
    /*
     * Check one more time to see if it is really necessary to update
     * microcode just in case this is a hyperthreaded processor where
     * the threads share the same microcode.
     */
    if (!ucode_force_update) {
        ucode->read_rev(uinfop);
        uusp->new_rev = uinfop->cui_rev;
        if (uinfop->cui_rev >= uusp->expected_rev)
            return (0);
    }

    wrmsr(ucode->write_msr, (uintptr_t)uusp->ucodep);
#endif
    ucode->read_rev(uinfop);
    uusp->new_rev = uinfop->cui_rev;

    return (0);
}

/*ARGSUSED*/
static uint32_t
ucode_load_amd(ucode_file_t *ufp, cpu_ucode_info_t *uinfop, cpu_t *cp)
{
    ucode_file_amd_t *ucodefp = ufp->amd;
#ifdef  __xpv
    ucode_update_t uus;
#endif

    ASSERT(ucode);
    ASSERT(ucodefp);

#ifndef __xpv
    kpreempt_disable();
    wrmsr(ucode->write_msr, (uintptr_t)ucodefp);
    ucode->read_rev(uinfop);
    kpreempt_enable();

    return (ucodefp->uf_header.uh_patch_id);
#else
    uus.ucodep = ucodefp->ucodep;
    uus.usize = ucodefp->usize;
    ucode_load_xpv(&uus);
    ucode->read_rev(uinfop);
    uus.new_rev = uinfop->cui_rev;

    return (uus.new_rev);
#endif
}

/*ARGSUSED2*/
static uint32_t
ucode_load_intel(ucode_file_t *ufp, cpu_ucode_info_t *uinfop, cpu_t *cp)
{
    ucode_file_intel_t *ucodefp = &ufp->intel;
#ifdef __xpv
    uint32_t ext_offset;
    uint32_t body_size;
    uint32_t ext_size;
    uint8_t *ustart;
    uint32_t usize;
    ucode_update_t uus;
#endif

    ASSERT(ucode);

#ifdef __xpv
    /*
     * the hypervisor wants the header, data, and extended
     * signature tables. We can only get here from the boot
     * CPU (cpu #0), we don't need to free as ucode_zalloc() will
     * use BOP_ALLOC().
     */
    usize = UCODE_TOTAL_SIZE_INTEL(ucodefp->uf_header->uh_total_size);
    ustart = ucode_zalloc(cp->cpu_id, usize);
    ASSERT(ustart);

    body_size = UCODE_BODY_SIZE_INTEL(ucodefp->uf_header->uh_body_size);
    ext_offset = body_size + UCODE_HEADER_SIZE_INTEL;
    ext_size = usize - ext_offset;
    ASSERT(ext_size >= 0);

    (void) memcpy(ustart, ucodefp->uf_header, UCODE_HEADER_SIZE_INTEL);
    (void) memcpy(&ustart[UCODE_HEADER_SIZE_INTEL], ucodefp->uf_body,
        body_size);
    if (ext_size > 0) {
        (void) memcpy(&ustart[ext_offset],
            ucodefp->uf_ext_table, ext_size);
    }
    uus.ucodep = ustart;
    uus.usize = usize;
    ucode_load_xpv(&uus);
    ucode->read_rev(uinfop);
    uus.new_rev = uinfop->cui_rev;
#else
    kpreempt_disable();
    wrmsr(ucode->write_msr, (uintptr_t)ucodefp->uf_body);
    ucode->read_rev(uinfop);
    kpreempt_enable();
#endif

    return (ucodefp->uf_header->uh_rev);
}


#ifdef  __xpv
static void
ucode_load_xpv(ucode_update_t *uusp)
{
    xen_platform_op_t op;
    int e;

    ASSERT(DOMAIN_IS_INITDOMAIN(xen_info));

    kpreempt_disable();
    op.cmd = XENPF_microcode_update;
    op.interface_version = XENPF_INTERFACE_VERSION;
    /*LINTED: constant in conditional context*/
    set_xen_guest_handle(op.u.microcode.data, uusp->ucodep);
    op.u.microcode.length = uusp->usize;
    e = HYPERVISOR_platform_op(&op);
    if (e != 0) {
        cmn_err(CE_WARN, "hypervisor failed to accept uCode update");
    }
    kpreempt_enable();
}
#endif /* __xpv */

static void
ucode_read_rev_amd(cpu_ucode_info_t *uinfop)
{
    uinfop->cui_rev = rdmsr(MSR_AMD_PATCHLEVEL);
}

static void
ucode_read_rev_intel(cpu_ucode_info_t *uinfop)
{
    struct cpuid_regs crs;

    /*
     * The Intel 64 and IA-32 Architecture Software Developer's Manual
     * recommends that MSR_INTC_UCODE_REV be loaded with 0 first, then
     * execute cpuid to guarantee the correct reading of this register.
     */
    wrmsr(MSR_INTC_UCODE_REV, 0);
    (void) __cpuid_insn(&crs);
    uinfop->cui_rev = (rdmsr(MSR_INTC_UCODE_REV) >> INTC_UCODE_REV_SHIFT);
}

static ucode_errno_t
ucode_extract_amd(ucode_update_t *uusp, uint8_t *ucodep, int size)
{
#ifndef __xpv
    uint32_t *ptr = (uint32_t *)ucodep;
    ucode_eqtbl_amd_t *eqtbl;
    ucode_file_amd_t *ufp;
    int count;
    int higher = 0;
    ucode_errno_t rc = EM_NOMATCH;
    uint16_t eq_sig;

    /* skip over magic number & equivalence table header */
    ptr += 2; size -= 8;

    count = *ptr++; size -= 4;
    for (eqtbl = (ucode_eqtbl_amd_t *)ptr;
        eqtbl->ue_inst_cpu && eqtbl->ue_inst_cpu != uusp->sig;
        eqtbl++)
        ;

    eq_sig = eqtbl->ue_equiv_cpu;

    /* No equivalent CPU id found, assume outdated microcode file. */
    if (eq_sig == 0)
        return (EM_HIGHERREV);

    /* Use the first microcode patch that matches. */
    do {
        ptr += count >> 2; size -= count;

        if (!size)
            return (higher ? EM_HIGHERREV : EM_NOMATCH);

        ptr++; size -= 4;
        count = *ptr++; size -= 4;
        ufp = (ucode_file_amd_t *)ptr;

        rc = ucode_match_amd(eq_sig, &uusp->info, ufp, count);
        if (rc == EM_HIGHERREV)
            higher = 1;
    } while (rc != EM_OK);

    uusp->ucodep = (uint8_t *)ufp;
    uusp->usize = count;
    uusp->expected_rev = ufp->uf_header.uh_patch_id;
#else
    /*
     * The hypervisor will choose the patch to load, so there is no way to
     * know the "expected revision" in advance. This is especially true on
     * mixed-revision systems where more than one patch will be loaded.
     */
    uusp->expected_rev = 0;
    uusp->ucodep = ucodep;
    uusp->usize = size;

    ucode_chipset_amd(ucodep, size);
#endif

    return (EM_OK);
}

static ucode_errno_t
ucode_extract_intel(ucode_update_t *uusp, uint8_t *ucodep, int size)
{
    uint32_t    header_size = UCODE_HEADER_SIZE_INTEL;
    int     remaining;
    int     found = 0;
    ucode_errno_t   search_rc = EM_NOMATCH; /* search result */

    /*
     * Go through the whole buffer in case there are
     * multiple versions of matching microcode for this
     * processor.
     */
    for (remaining = size; remaining > 0; ) {
        int total_size, body_size, ext_size;
        uint8_t *curbuf = &ucodep[size - remaining];
        ucode_header_intel_t *uhp = (ucode_header_intel_t *)curbuf;
        ucode_ext_table_intel_t *uetp = NULL;
        ucode_errno_t tmprc;

        total_size = UCODE_TOTAL_SIZE_INTEL(uhp->uh_total_size);
        body_size = UCODE_BODY_SIZE_INTEL(uhp->uh_body_size);
        ext_size = total_size - (header_size + body_size);

        if (ext_size > 0)
            uetp = (ucode_ext_table_intel_t *)
                &curbuf[header_size + body_size];

        tmprc = ucode_match_intel(uusp->sig, &uusp->info, uhp, uetp);

        /*
         * Since we are searching through a big file
         * containing microcode for pretty much all the
         * processors, we are bound to get EM_NOMATCH
         * at one point.  However, if we return
         * EM_NOMATCH to users, it will really confuse
         * them.  Therefore, if we ever find a match of
         * a lower rev, we will set return code to
         * EM_HIGHERREV.
         */
        if (tmprc == EM_HIGHERREV)
            search_rc = EM_HIGHERREV;

        if (tmprc == EM_OK &&
            uusp->expected_rev < uhp->uh_rev) {
#ifndef __xpv
            uusp->ucodep = (uint8_t *)&curbuf[header_size];
#else
            uusp->ucodep = (uint8_t *)curbuf;
#endif
            uusp->usize =
                UCODE_TOTAL_SIZE_INTEL(uhp->uh_total_size);
            uusp->expected_rev = uhp->uh_rev;
            found = 1;
        }

        remaining -= total_size;
    }

    if (!found)
        return (search_rc);

    return (EM_OK);
}
/*
 * Entry point to microcode update from the ucode_drv driver.
 *
 * Returns EM_OK on success, corresponding error code on failure.
 */
ucode_errno_t
ucode_update(uint8_t *ucodep, int size)
{
    int     found = 0;
    processorid_t   id;
    ucode_update_t  cached = { 0 };
    ucode_update_t  *cachedp = NULL;
    ucode_errno_t   rc = EM_OK;
    ucode_errno_t   search_rc = EM_NOMATCH; /* search result */
    cpuset_t cpuset;

    ASSERT(ucode);
    ASSERT(ucodep);
    CPUSET_ZERO(cpuset);

    if (!ucode->capable(CPU))
        return (EM_NOTSUP);

    mutex_enter(&cpu_lock);

    for (id = 0; id < max_ncpus; id++) {
        cpu_t *cpu;
        ucode_update_t uus = { 0 };
        ucode_update_t *uusp = &uus;

        /*
         * If there is no such CPU or it is not xcall ready, skip it.
         */
        if ((cpu = cpu_get(id)) == NULL ||
            !(cpu->cpu_flags & CPU_READY))
            continue;

        uusp->sig = cpuid_getsig(cpu);
        bcopy(cpu->cpu_m.mcpu_ucode_info, &uusp->info,
            sizeof (uusp->info));

        /*
         * If the current CPU has the same signature and platform
         * id as the previous one we processed, reuse the information.
         */
        if (cachedp && cachedp->sig == cpuid_getsig(cpu) &&
            cachedp->info.cui_platid == uusp->info.cui_platid) {
            uusp->ucodep = cachedp->ucodep;
            uusp->expected_rev = cachedp->expected_rev;
            /*
             * Intuitively we should check here to see whether the
             * running microcode rev is >= the expected rev, and
             * quit if it is.  But we choose to proceed with the
             * xcall regardless of the running version so that
             * the other threads in an HT processor can update
             * the cpu_ucode_info structure in machcpu.
             */
        } else if ((search_rc = ucode->extract(uusp, ucodep, size))
            == EM_OK) {
            bcopy(uusp, &cached, sizeof (cached));
            cachedp = &cached;
            found = 1;
        }

        /* Nothing to do */
        if (uusp->ucodep == NULL)
            continue;

#ifdef  __xpv
        /*
         * for i86xpv, the hypervisor will update all the CPUs.
         * the hypervisor wants the header, data, and extended
         * signature tables. ucode_write will just read in the
         * updated version on all the CPUs after the update has
         * completed.
         */
        if (id == 0) {
            ucode_load_xpv(uusp);
        }
#endif

        CPUSET_ADD(cpuset, id);
        kpreempt_disable();
        xc_sync((xc_arg_t)uusp, 0, 0, CPUSET2BV(cpuset), ucode_write);
        kpreempt_enable();
        CPUSET_DEL(cpuset, id);

        if (uusp->new_rev != 0 && uusp->info.cui_rev == uusp->new_rev) {
            rc = EM_HIGHERREV;
        } else if ((uusp->new_rev == 0) || (uusp->expected_rev != 0 &&
            uusp->expected_rev != uusp->new_rev)) {
            cmn_err(CE_WARN, ucode_failure_fmt,
                id, uusp->info.cui_rev, uusp->expected_rev);
            rc = EM_UPDATE;
        } else {
            cmn_err(CE_CONT, ucode_success_fmt,
                id, uusp->info.cui_rev, uusp->new_rev);
        }
    }

    mutex_exit(&cpu_lock);

    if (!found)
        rc = search_rc;

    return (rc);
}

/*
 * Initialize mcpu_ucode_info, and perform microcode update if necessary.
 * This is the entry point from boot path where pointer to CPU structure
 * is available.
 *
 * cpuid_info must be initialized before ucode_check can be called.
 */
void
ucode_check(cpu_t *cp)
{
    cpu_ucode_info_t *uinfop;
    ucode_errno_t rc = EM_OK;
    uint32_t new_rev = 0;

    ASSERT(cp);
    if (cp->cpu_id == 0)
        cp->cpu_m.mcpu_ucode_info = &cpu_ucode_info0;

    uinfop = cp->cpu_m.mcpu_ucode_info;
    ASSERT(uinfop);

    /* set up function pointers if not already done */
    if (!ucode)
        switch (cpuid_getvendor(cp)) {
        case X86_VENDOR_AMD:
            ucode = &ucode_amd;
            break;
        case X86_VENDOR_Intel:
            ucode = &ucode_intel;
            break;
        default:
            return;
        }

    if (!ucode->capable(cp))
        return;

    /*
     * The MSR_INTC_PLATFORM_ID is supported in Celeron and Xeon
     * (Family 6, model 5 and above) and all processors after.
     */
    if ((cpuid_getvendor(cp) == X86_VENDOR_Intel) &&
        ((cpuid_getmodel(cp) >= 5) || (cpuid_getfamily(cp) > 6))) {
        uinfop->cui_platid = 1 << ((rdmsr(MSR_INTC_PLATFORM_ID) >>
            INTC_PLATFORM_ID_SHIFT) & INTC_PLATFORM_ID_MASK);
    }

    ucode->read_rev(uinfop);

#ifdef  __xpv
    /*
     * for i86xpv, the hypervisor will update all the CPUs. We only need
     * do do this on one of the CPUs (and there always is a CPU 0).
     */
    if (cp->cpu_id != 0) {
        return;
    }
#endif

    /*
     * Check to see if we need ucode update
     */
    if ((rc = ucode->locate(cp, uinfop, &ucodefile)) == EM_OK) {
        new_rev = ucode->load(&ucodefile, uinfop, cp);

        if (uinfop->cui_rev != new_rev)
            cmn_err(CE_WARN, ucode_failure_fmt, cp->cpu_id,
                uinfop->cui_rev, new_rev);
    }

    /*
     * If we fail to find a match for any reason, free the file structure
     * just in case we have read in a partial file.
     *
     * Since the scratch memory for holding the microcode for the boot CPU
     * came from BOP_ALLOC, we will reset the data structure as if we
     * never did the allocation so we don't have to keep track of this
     * special chunk of memory.  We free the memory used for the rest
     * of the CPUs in start_other_cpus().
     */
    if (rc != EM_OK || cp->cpu_id == 0)
        ucode->file_reset(&ucodefile, cp->cpu_id);
}

/*
 * Returns microcode revision from the machcpu structure.
 */
ucode_errno_t
ucode_get_rev(uint32_t *revp)
{
    int i;

    ASSERT(ucode);
    ASSERT(revp);

    if (!ucode->capable(CPU))
        return (EM_NOTSUP);

    mutex_enter(&cpu_lock);
    for (i = 0; i < max_ncpus; i++) {
        cpu_t *cpu;

        if ((cpu = cpu_get(i)) == NULL)
            continue;

        revp[i] = cpu->cpu_m.mcpu_ucode_info->cui_rev;
    }
    mutex_exit(&cpu_lock);

    return (EM_OK);
}