i86pc/boot/boot_console.c

	boot_console.c revision 48633f182599946aebd63dccdc852ad722b57d0e
/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License (the "License").
 * You may not use this file except in compliance with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or http://www.opensolaris.org/os/licensing.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */
/*
 * Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
 * Use is subject to license terms.
 */

#include <sys/types.h>
#include <sys/systm.h>
#include <sys/archsystm.h>
#include <sys/boot_console.h>
#include <sys/panic.h>
#include <sys/ctype.h>
#if defined(__xpv)
#include <sys/hypervisor.h>
#endif /* __xpv */

#include "boot_serial.h"
#include "boot_vga.h"

#if defined(_BOOT)
#include <dboot/dboot_asm.h>
#include <dboot/dboot_xboot.h>
#else /* _BOOT */
#include <sys/bootconf.h>
#if defined(__xpv)
#include <sys/evtchn_impl.h>
#endif /* __xpv */
static char *defcons_buf;
static char *defcons_cur;
#endif /* _BOOT */

#if defined(__xpv)
extern void bcons_init_xen(char *);
extern void bcons_putchar_xen(int);
extern int bcons_getchar_xen(void);
extern int bcons_ischar_xen(void);
#endif /* __xpv */

static int cons_color = CONS_COLOR;
int console = CONS_SCREEN_TEXT;
#if defined(__xpv)
static int console_hypervisor_redirect = B_FALSE;
static int console_hypervisor_device = CONS_INVALID;
#endif /* __xpv */

static int serial_ischar(void);
static int serial_getchar(void);
static void serial_putchar(int);
static void serial_adjust_prop(void);

static char *boot_line = NULL;

#if !defined(_BOOT)
/* Set if the console or mode are expressed in the boot line */
static int console_set, console_mode_set;
#endif

/* Clear the screen and initialize VIDEO, XPOS and YPOS. */
void
clear_screen(void)
{
    /*
     * XXX should set vga mode so we don't depend on the
     * state left by the boot loader.  Note that we have to
     * enable the cursor before clearing the screen since
     * the cursor position is dependant upon the cursor
     * skew, which is initialized by vga_cursor_display()
     */
    vga_cursor_display();
    vga_clear(cons_color);
    vga_setpos(0, 0);
}

/* Put the character C on the screen. */
static void
screen_putchar(int c)
{
    int row, col;

    vga_getpos(&row, &col);
    switch (c) {
    case '\t':
        col += 8 - (col % 8);
        if (col == VGA_TEXT_COLS)
            col = 79;
        vga_setpos(row, col);
        break;

    case '\r':
        vga_setpos(row, 0);
        break;

    case '\b':
        if (col > 0)
            vga_setpos(row, col - 1);
        break;

    case '\n':
        if (row < VGA_TEXT_ROWS - 1)
            vga_setpos(row + 1, col);
        else
            vga_scroll(cons_color);
        break;

    default:
        vga_drawc(c, cons_color);
        if (col < VGA_TEXT_COLS -1)
            vga_setpos(row, col + 1);
        else if (row < VGA_TEXT_ROWS - 1)
            vga_setpos(row + 1, 0);
        else {
            vga_setpos(row, 0);
            vga_scroll(cons_color);
        }
        break;
    }
}

/* serial port stuff */
#if defined(__xpv) && defined(_BOOT)
static int
ec_probe_pirq(int pirq)
{
    evtchn_bind_pirq_t bind;
    evtchn_close_t close;

    bind.pirq = pirq;
    bind.flags = 0;
    if (HYPERVISOR_event_channel_op(EVTCHNOP_bind_pirq, &bind) != 0)
        return (0);

    close.port = bind.port;
    (void) HYPERVISOR_event_channel_op(EVTCHNOP_close, &close);
    return (1);
}
#endif /* __xpv && _BOOT */

static int port;

static void
serial_init(void)
{
    switch (console) {
    case CONS_TTYA:
        port = 0x3f8;
        break;
    case CONS_TTYB:
        port = 0x2f8;
        break;
    }

    outb(port + ISR, 0x20);
    if (inb(port + ISR) & 0x20) {
        /*
         * 82510 chip is present
         */
        outb(port + DAT+7, 0x04);   /* clear status */
        outb(port + ISR, 0x40);  /* set to bank 2 */
        outb(port + MCR, 0x08);  /* IMD */
        outb(port + DAT, 0x21);  /* FMD */
        outb(port + ISR, 0x00);  /* set to bank 0 */
    } else {
        /*
         * set the UART in FIFO mode if it has FIFO buffers.
         * use 16550 fifo reset sequence specified in NS
         * application note. disable fifos until chip is
         * initialized.
         */
        outb(port + FIFOR, 0x00);       /* clear */
        outb(port + FIFOR, FIFO_ON);        /* enable */
        outb(port + FIFOR, FIFO_ON|FIFORXFLSH);  /* reset */
        outb(port + FIFOR,
            FIFO_ON|FIFODMA|FIFOTXFLSH|FIFORXFLSH|0x80);
        if ((inb(port + ISR) & 0xc0) != 0xc0) {
            /*
             * no fifo buffers so disable fifos.
             * this is true for 8250's
             */
            outb(port + FIFOR, 0x00);
        }
    }

    /* disable interrupts */
    outb(port + ICR, 0);

#if !defined(_BOOT)
    if (IN_XPV_PANIC())
        return;
#endif

    /* adjust setting based on tty properties */
    serial_adjust_prop();

#if defined(_BOOT)
    /*
     * Do a full reset to match console behavior.
     * 0x1B + c - reset everything
     */
    serial_putchar(0x1B);
    serial_putchar('c');
#endif
}

/* Advance str pointer past white space */
#define EAT_WHITE_SPACE(str)    {           \
    while ((*str != '\0') && ISSPACE(*str))     \
        str++;                  \
}

/*
 * boot_line is set when we call here.  Search it for the argument name,
 * and if found, return a pointer to it.
 */
static char *
find_boot_line_prop(const char *name)
{
    char *ptr;
    char end_char;
    size_t len;

    if (boot_line == NULL)
        return (NULL);

    len = strlen(name);

    /*
     * We have two nested loops here: the outer loop discards all options
     * except -B, and the inner loop parses the -B options looking for
     * the one we're interested in.
     */
    for (ptr = boot_line; *ptr != '\0'; ptr++) {
        EAT_WHITE_SPACE(ptr);

        if (*ptr == '-') {
            ptr++;
            while ((*ptr != '\0') && (*ptr != 'B') &&
                !ISSPACE(*ptr))
                ptr++;
            if (*ptr == '\0')
                return (NULL);
            else if (*ptr != 'B')
                continue;
        } else {
            while ((*ptr != '\0') && !ISSPACE(*ptr))
                ptr++;
            if (*ptr == '\0')
                return (NULL);
            continue;
        }

        do {
            ptr++;
            EAT_WHITE_SPACE(ptr);

            if ((strncmp(ptr, name, len) == 0) &&
                (ptr[len] == '=')) {
                ptr += len + 1;
                if ((*ptr == '\'') || (*ptr == '"'))
                    return (ptr + 1);
                else
                    return (ptr);
            }

            /*
             * We have a property, and it's not the one we're
             * interested in.  Skip the property name.  A name
             * can end with '=', a comma, or white space.
             */
            while ((*ptr != '\0') && (*ptr != '=') &&
                (*ptr != ',') && (!ISSPACE(*ptr)))
                ptr++;

            /*
             * We only want to go through the rest of the inner
             * loop if we have a comma.  If we have a property
             * name without a value, either continue or break.
             */
            if (*ptr == '\0')
                return (NULL);
            else if (*ptr == ',')
                continue;
            else if (ISSPACE(*ptr))
                break;
            ptr++;

            /*
             * Is the property quoted?
             */
            if ((*ptr == '\'') || (*ptr == '"')) {
                end_char = *ptr;
            } else {
                /*
                 * Not quoted, so the string ends at a comma
                 * or at white space.  Deal with white space
                 * later.
                 */
                end_char = ',';
            }

            /*
             * Now, we can ignore any characters until we find
             * end_char.
             */
            for (; (*ptr != '\0') && (*ptr != end_char); ptr++) {
                if ((end_char == ',') && ISSPACE(*ptr))
                    break;
            }
            if (*ptr && (*ptr != ','))
                ptr++;
        } while (*ptr == ',');
    }
    return (NULL);
}


#define MATCHES(p, pat) \
    (strncmp(p, pat, strlen(pat)) == 0 ? (p += strlen(pat), 1) : 0)

#define SKIP(p, c)              \
    while (*(p) != 0 && *p != (c))      \
        ++(p);              \
    if (*(p) == (c))            \
        ++(p);

/*
 * find a tty mode property either from cmdline or from boot properties
 */
static char *
get_mode_value(char *name)
{
    /*
     * when specified on boot line it looks like "name" "="....
     */
    if (boot_line != NULL) {
        return (find_boot_line_prop(name));
    }

#if defined(_BOOT)
    return (NULL);
#else
    /*
     * if we're running in the full kernel we check the bootenv.rc settings
     */
    {
        static char propval[20];

        propval[0] = 0;
        if (do_bsys_getproplen(NULL, name) <= 0)
            return (NULL);
        (void) do_bsys_getprop(NULL, name, propval);
        return (propval);
    }
#endif
}

/*
 * adjust serial port based on properties
 * These come either from the cmdline or from boot properties.
 */
static void
serial_adjust_prop(void)
{
    char propname[20];
    char *propval;
    char *p;
    ulong_t baud;
    uchar_t lcr = 0;
    uchar_t mcr = DTR | RTS;

    (void) strcpy(propname, "ttyX-mode");
    propname[3] = 'a' + console - CONS_TTYA;
    propval = get_mode_value(propname);
    if (propval == NULL)
        propval = "9600,8,n,1,-";
#if !defined(_BOOT)
    else
        console_mode_set = 1;
#endif

    /* property is of the form: "9600,8,n,1,-" */
    p = propval;
    if (MATCHES(p, "110,"))
        baud = ASY110;
    else if (MATCHES(p, "150,"))
        baud = ASY150;
    else if (MATCHES(p, "300,"))
        baud = ASY300;
    else if (MATCHES(p, "600,"))
        baud = ASY600;
    else if (MATCHES(p, "1200,"))
        baud = ASY1200;
    else if (MATCHES(p, "2400,"))
        baud = ASY2400;
    else if (MATCHES(p, "4800,"))
        baud = ASY4800;
    else if (MATCHES(p, "19200,"))
        baud = ASY19200;
    else if (MATCHES(p, "38400,"))
        baud = ASY38400;
    else if (MATCHES(p, "57600,"))
        baud = ASY57600;
    else if (MATCHES(p, "115200,"))
        baud = ASY115200;
    else {
        baud = ASY9600;
        SKIP(p, ',');
    }
    outb(port + LCR, DLAB);
    outb(port + DAT + DLL, baud & 0xff);
    outb(port + DAT + DLH, (baud >> 8) & 0xff);

    switch (*p) {
    case '5':
        lcr |= BITS5;
        ++p;
        break;
    case '6':
        lcr |= BITS6;
        ++p;
        break;
    case '7':
        lcr |= BITS7;
        ++p;
        break;
    case '8':
        ++p;
    default:
        lcr |= BITS8;
        break;
    }

    SKIP(p, ',');

    switch (*p) {
    case 'n':
        lcr |= PARITY_NONE;
        ++p;
        break;
    case 'o':
        lcr |= PARITY_ODD;
        ++p;
        break;
    case 'e':
        ++p;
    default:
        lcr |= PARITY_EVEN;
        break;
    }


    SKIP(p, ',');

    switch (*p) {
    case '1':
        /* STOP1 is 0 */
        ++p;
        break;
    default:
        lcr |= STOP2;
        break;
    }
    /* set parity bits */
    outb(port + LCR, lcr);

    (void) strcpy(propname, "ttyX-rts-dtr-off");
    propname[3] = 'a' + console - CONS_TTYA;
    propval = get_mode_value(propname);
    if (propval == NULL)
        propval = "false";
    if (propval[0] != 'f' && propval[0] != 'F')
        mcr = 0;
    /* set modem control bits */
    outb(port + MCR, mcr | OUT2);
}

/*
 * A structure to map console names to values.
 */
typedef struct {
    char *name;
    int value;
} console_value_t;

console_value_t console_devices[] = {
    { "ttya", CONS_TTYA },
    { "ttyb", CONS_TTYB },
    { "text", CONS_SCREEN_TEXT },
    { "graphics", CONS_SCREEN_GRAPHICS },
#if defined(__xpv)
    { "hypervisor", CONS_HYPERVISOR },
#endif
#if !defined(_BOOT)
    { "usb-serial", CONS_USBSER },
#endif
    { "", CONS_INVALID }
};

void
bcons_init(char *bootstr)
{
    console_value_t *consolep;
    size_t len, cons_len;
    char *cons_str;

    boot_line = bootstr;
    console = CONS_INVALID;

#if defined(__xpv)
    bcons_init_xen(bootstr);
#endif /* __xpv */

    cons_str = find_boot_line_prop("console");
    if (cons_str == NULL)
        cons_str = find_boot_line_prop("output-device");

    /*
     * Go through the console_devices array trying to match the string
     * we were given.  The string on the command line must end with
     * a comma or white space.
     */
    if (cons_str != NULL) {
        cons_len = strlen(cons_str);
        consolep = console_devices;
        for (; consolep->name[0] != '\0'; consolep++) {
            len = strlen(consolep->name);
            if ((len <= cons_len) && ((cons_str[len] == '\0') ||
                (cons_str[len] == ',') || (cons_str[len] == '\'') ||
                (cons_str[len] == '"') || ISSPACE(cons_str[len])) &&
                (strncmp(cons_str, consolep->name, len) == 0)) {
                console = consolep->value;
                break;
            }
        }
    }

#if defined(__xpv)
    /*
     * domU's always use the hypervisor regardless of what
     * the console variable may be set to.
     */
    if (!DOMAIN_IS_INITDOMAIN(xen_info)) {
        console = CONS_HYPERVISOR;
        console_hypervisor_redirect = B_TRUE;
    }
#endif /* __xpv */

    /*
     * If no console device specified, default to text.
     * Remember what was specified for second phase.
     */
    if (console == CONS_INVALID)
        console = CONS_SCREEN_TEXT;
#if !defined(_BOOT)
    else
        console_set = 1;
#endif

#if defined(__xpv)
    if (DOMAIN_IS_INITDOMAIN(xen_info)) {
        switch (HYPERVISOR_console_io(CONSOLEIO_get_device, 0, NULL)) {
            case XEN_CONSOLE_COM1:
                console_hypervisor_device = CONS_TTYA;
                break;
            case XEN_CONSOLE_COM2:
                console_hypervisor_device = CONS_TTYB;
                break;
            case XEN_CONSOLE_VGA:
                /*
                 * Currently xen doesn't really support
                 * keyboard/display console devices.
                 * What this setting means is that
                 * "vga=keep" has been enabled, which is
                 * more of a xen debugging tool that a
                 * true console mode.  Hence, we're going
                 * to ignore this xen "console" setting.
                 */
                /*FALLTHROUGH*/
            default:
                console_hypervisor_device = CONS_INVALID;
        }
    }

    /*
     * if the hypervisor is using the currently selected serial
     * port then default to using the hypervisor as the console
     * device.
     */
    if (console == console_hypervisor_device) {
        console = CONS_HYPERVISOR;
        console_hypervisor_redirect = B_TRUE;
    }
#endif /* __xpv */

    switch (console) {
    case CONS_TTYA:
    case CONS_TTYB:
        serial_init();
        break;

    case CONS_HYPERVISOR:
        break;

#if !defined(_BOOT)
    case CONS_USBSER:
        /*
         * We can't do anything with the usb serial
         * until we have memory management.
         */
        break;
#endif
    case CONS_SCREEN_GRAPHICS:
        kb_init();
        break;
    case CONS_SCREEN_TEXT:
    default:
#if defined(_BOOT)
        clear_screen(); /* clears the grub or xen screen */
#endif /* _BOOT */
        kb_init();
        break;
    }
    boot_line = NULL;
}

#if !defined(_BOOT)
/*
 * 2nd part of console initialization.
 * In the kernel (ie. fakebop), this can be used only to switch to
 * using a serial port instead of screen based on the contents
 * of the bootenv.rc file.
 */
/*ARGSUSED*/
void
bcons_init2(char *inputdev, char *outputdev, char *consoledev)
{
    int cons = CONS_INVALID;
    char *devnames[] = { consoledev, outputdev, inputdev, NULL };
    console_value_t *consolep;
    int i;

    if (console != CONS_USBSER) {
        if (console_set) {
            /*
             * If the console was set on the command line,
             * but the ttyX-mode was not, we only need to
             * check bootenv.rc for that setting.
             */
            if ((!console_mode_set) &&
                (console == CONS_TTYA || console == CONS_TTYB))
                serial_init();
            return;
        }

        for (i = 0; devnames[i] != NULL; i++) {
            consolep = console_devices;
            for (; consolep->name[0] != '\0'; consolep++) {
                if (strcmp(devnames[i], consolep->name) == 0) {
                    cons = consolep->value;
                }
            }
            if (cons != CONS_INVALID)
                break;
        }

#if defined(__xpv)
        /*
         * if the hypervisor is using the currently selected console
         * device then default to using the hypervisor as the console
         * device.
         */
        if (cons == console_hypervisor_device) {
            cons = CONS_HYPERVISOR;
            console_hypervisor_redirect = B_TRUE;
        }
#endif /* __xpv */

        if ((cons == CONS_INVALID) || (cons == console)) {
            /*
             * we're sticking with whatever the current setting is
             */
            return;
        }

        console = cons;
        if (cons == CONS_TTYA || cons == CONS_TTYB) {
            serial_init();
            return;
        }
    }


    /*
     * USB serial -- we just collect data into a buffer
     */
    if (console == CONS_USBSER || console == CONS_SCREEN_GRAPHICS) {
        extern void *defcons_init(size_t);
        defcons_buf = defcons_cur = defcons_init(MMU_PAGESIZE);
    }
}

#if defined(__xpv)
boolean_t
bcons_hypervisor_redirect(void)
{
    return (console_hypervisor_redirect);
}

void
bcons_device_change(int new_console)
{
    if (new_console < CONS_MIN || new_console > CONS_MAX)
        return;

    /*
     * If we are asked to switch the console to the hypervisor, that
     * really means to switch the console to whichever device the
     * hypervisor is/was using.
     */
    if (new_console == CONS_HYPERVISOR)
        new_console = console_hypervisor_device;

    console = new_console;

    if (new_console == CONS_TTYA || new_console == CONS_TTYB)
        serial_init();
}
#endif /* __xpv */

static void
defcons_putchar(int c)
{
    if (defcons_cur - defcons_buf < MMU_PAGESIZE)
        *defcons_cur++ = c;
}
#endif  /* _BOOT */

static void
serial_putchar(int c)
{
    int checks = 10000;

    while (((inb(port + LSR) & XHRE) == 0) && checks--)
        ;
    outb(port + DAT, (char)c);
}

static int
serial_getchar(void)
{
    uchar_t lsr;

    while (serial_ischar() == 0)
        ;

    lsr = inb(port + LSR);
    if (lsr & (SERIAL_BREAK | SERIAL_FRAME |
        SERIAL_PARITY | SERIAL_OVERRUN)) {
        if (lsr & SERIAL_OVERRUN) {
            return (inb(port + DAT));
        } else {
            /* Toss the garbage */
            (void) inb(port + DAT);
            return (0);
        }
    }
    return (inb(port + DAT));
}

static int
serial_ischar(void)
{
    return (inb(port + LSR) & RCA);
}

static void
_doputchar(int c)
{
    switch (console) {
    case CONS_TTYA:
    case CONS_TTYB:
        serial_putchar(c);
        return;
    case CONS_SCREEN_TEXT:
        screen_putchar(c);
        return;
    case CONS_SCREEN_GRAPHICS:
#if !defined(_BOOT)
    case CONS_USBSER:
        defcons_putchar(c);
#endif /* _BOOT */
        return;
    }
}

void
bcons_putchar(int c)
{
    static int bhcharpos = 0;

#if defined(__xpv)
    if (!DOMAIN_IS_INITDOMAIN(xen_info) ||
        console == CONS_HYPERVISOR) {
        bcons_putchar_xen(c);
        return;
    }
#endif /* __xpv */

    if (c == '\t') {
        do {
            _doputchar(' ');
        } while (++bhcharpos % 8);
        return;
    } else  if (c == '\n' || c == '\r') {
        bhcharpos = 0;
        _doputchar('\r');
        _doputchar(c);
        return;
    } else if (c == '\b') {
        if (bhcharpos)
            bhcharpos--;
        _doputchar(c);
        return;
    }

    bhcharpos++;
    _doputchar(c);
}

/*
 * kernel character input functions
 */
int
bcons_getchar(void)
{
#if defined(__xpv)
    if (!DOMAIN_IS_INITDOMAIN(xen_info) ||
        console == CONS_HYPERVISOR)
        return (bcons_getchar_xen());
#endif /* __xpv */

    switch (console) {
    case CONS_TTYA:
    case CONS_TTYB:
        return (serial_getchar());
    default:
        return (kb_getchar());
    }
}

#if !defined(_BOOT)

int
bcons_ischar(void)
{

#if defined(__xpv)
    if (!DOMAIN_IS_INITDOMAIN(xen_info) ||
        console == CONS_HYPERVISOR)
        return (bcons_ischar_xen());
#endif /* __xpv */

    switch (console) {
    case CONS_TTYA:
    case CONS_TTYB:
        return (serial_ischar());
    default:
        return (kb_ischar());
    }
}

#endif /* _BOOT */