inquiry.h revision 7c478bd95313f5f23a4c958a745db2134aa03244
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License, Version 1.0 only
* (the "License"). You may not use this file except in compliance
* with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright (c) 1996-2000 by Sun Microsystems, Inc.
* All rights reserved.
*/
#ifndef _SYS_SCSI_GENERIC_INQUIRY_H
#define _SYS_SCSI_GENERIC_INQUIRY_H
#pragma ident "%Z%%M% %I% %E% SMI"
#ifdef __cplusplus
extern "C" {
#endif
/*
* SCSI Inquiry Data
*
* Format of data returned as a result of an INQUIRY command.
*
*/
#if defined(_BIT_FIELDS_LTOH)
struct scsi_inquiry {
/*
* byte 0
*
* Bits 7-5 are the Peripheral Device Qualifier
* Bits 4-0 are the Peripheral Device Type
*
*/
uchar_t inq_dtype;
/* byte 1 */
uchar_t inq_qual : 7, /* device type qualifier */
inq_rmb : 1; /* removable media */
/* byte 2 */
uchar_t inq_ansi : 3, /* ANSI version */
inq_ecma : 3, /* ECMA version */
inq_iso : 2; /* ISO version */
/* byte 3 */
uchar_t inq_rdf : 4, /* response data format */
: 1, /* reserved */
inq_normaca : 1, /* setting NACA bit supported */
inq_trmiop : 1, /* TERMINATE I/O PROC msg */
inq_aenc : 1; /* async event notification cap. */
/* bytes 4-7 */
uchar_t inq_len; /* additional length */
uchar_t : 8; /* reserved */
uchar_t inq_addr16 : 1, /* supports 16 bit wide SCSI addr */
inq_addr32 : 1, /* supports 32 bit wide SCSI addr */
inq_ackqreqq : 1, /* data tranfer on Q cable */
inq_mchngr : 1, /* embedded/attached to medium chngr */
inq_dualp : 1, /* dual port device */
inq_port : 1, /* port receiving inquiry cmd */
: 2; /* reserved */
uchar_t inq_sftre : 1, /* supports Soft Reset option */
inq_cmdque : 1, /* supports command queueing */
inq_trandis : 1, /* supports transfer disable messages */
inq_linked : 1, /* supports linked commands */
inq_sync : 1, /* supports synchronous data xfers */
inq_wbus16 : 1, /* supports 16 bit wide data xfers */
inq_wbus32 : 1, /* supports 32 bit wide data xfers */
inq_reladdr : 1; /* supports relative addressing */
/* bytes 8-35 */
char inq_vid[8]; /* vendor ID */
char inq_pid[16]; /* product ID */
char inq_revision[4]; /* revision level */
/*
* Bytes 36-47 are reserved:
* For Sun qualified hard disk drives the inq_serial field contains
* two bytes of mfg date year code (ascii)
* two bytes of mfg date week code (ascii)
* six bytes of mfg serial number (ascii)
* two bytes unused
*/
char inq_serial[12];
/*
* Bytes 48-95 are reserved.
* 96 to 'n' are vendor-specific parameter bytes
*/
};
#elif defined(_BIT_FIELDS_HTOL)
struct scsi_inquiry {
/*
* byte 0
*
* Bits 7-5 are the Peripheral Device Qualifier
* Bits 4-0 are the Peripheral Device Type
*
*/
uchar_t inq_dtype;
/* byte 1 */
uchar_t inq_rmb : 1, /* removable media */
inq_qual : 7; /* device type qualifier */
/* byte 2 */
uchar_t inq_iso : 2, /* ISO version */
inq_ecma : 3, /* ECMA version */
inq_ansi : 3; /* ANSI version */
/* byte 3 */
uchar_t inq_aenc : 1, /* async event notification cap. */
inq_trmiop : 1, /* supports TERMINATE I/O PROC msg */
inq_normaca : 1, /* setting NACA bit supported */
: 1, /* reserved */
inq_rdf : 4; /* response data format */
/* bytes 4-7 */
uchar_t inq_len; /* additional length */
uchar_t : 8; /* reserved */
uchar_t : 2, /* reserved */
inq_port : 1, /* port receiving inquiry cmd */
inq_dualp : 1, /* dual port device */
inq_mchngr : 1, /* embedded/attached to medium chngr */
inq_ackqreqq : 1, /* data tranfer on Q cable */
inq_addr32 : 1, /* supports 32 bit wide SCSI addr */
inq_addr16 : 1; /* supports 16 bit wide SCSI addr */
uchar_t inq_reladdr : 1, /* supports relative addressing */
inq_wbus32 : 1, /* supports 32 bit wide data xfers */
inq_wbus16 : 1, /* supports 16 bit wide data xfers */
inq_sync : 1, /* supports synchronous data xfers */
inq_linked : 1, /* supports linked commands */
inq_trandis : 1, /* supports transfer disable messages */
inq_cmdque : 1, /* supports command queueing */
inq_sftre : 1; /* supports Soft Reset option */
/* bytes 8-35 */
char inq_vid[8]; /* vendor ID */
char inq_pid[16]; /* product ID */
char inq_revision[4]; /* revision level */
/*
* Bytes 36-47 are reserved:
* For Sun qualified hard disk drives the inq_serial field contains
* two bytes of mfg date year code (ascii)
* two bytes of mfg date week code (ascii)
* six bytes of mfg serial number (ascii)
* two bytes unused
*/
char inq_serial[12];
/*
* Bytes 48-95 are reserved.
* 96 to 'n' are vendor-specific parameter bytes
*/
};
#else
#error One of _BIT_FIELDS_LTOH or _BIT_FIELDS_HTOL must be defined
#endif /* _BIT_FIELDS_LTOH */
/*
* Defined Peripheral Device Types
*/
#define DTYPE_DIRECT 0x00
#define DTYPE_SEQUENTIAL 0x01
#define DTYPE_PRINTER 0x02
#define DTYPE_PROCESSOR 0x03
#define DTYPE_WORM 0x04
#define DTYPE_RODIRECT 0x05
#define DTYPE_SCANNER 0x06
#define DTYPE_OPTICAL 0x07
#define DTYPE_CHANGER 0x08
#define DTYPE_COMM 0x09
#define DTYPE_ARRAY_CTRL 0x0C
#define DTYPE_ESI 0x0D
/*
* Device types 0x0E-0x1E are reserved
*/
#define DTYPE_UNKNOWN 0x1F
#define DTYPE_MASK 0x1F
/*
* The peripheral qualifier tells us more about a particular device.
* (DPQ == DEVICE PERIPHERAL QUALIFIER).
*/
#define DPQ_POSSIBLE 0x00
/*
* The specified peripheral device type is
* currently connected to this logical unit.
* If the target cannot detrermine whether
* or not a physical device is currently
* connected, it shall also return this
* qualifier.
*/
#define DPQ_SUPPORTED 0x20
/*
* The target is capable of supporting the
* specified peripheral device type on this
* logical unit, however the the physical
* device is not currently connected to this
* logical unit.
*/
#define DPQ_NEVER 0x60
/*
* The target is not capable of supporting a
* physical device on this logical unit. For
* this peripheral qualifier, the peripheral
* device type will be set to DTYPE_UNKNOWN
* in order to provide compatibility with
* previous versions of SCSI.
*/
#define DPQ_VUNIQ 0x80
/*
* If this bit is set, this is a vendor
* unique qualifier.
*/
/*
* To maintain compatibility with previous versions
* of inquiry data formats, if a device peripheral
* qualifier states that the target is not capable
* of supporting a physical device on this logical unit,
* then the qualifier DPQ_NEVER is set, *AND* the
* actual device type must be set to DTYPE_UNKNOWN.
*
* This may make for some problems with older drivers
* that blindly check the entire first byte, where they
* should be checking for only the least 5 bits to see
* whether the correct type is at the specified nexus.
*/
#define DTYPE_NOTPRESENT (DPQ_NEVER | DTYPE_UNKNOWN)
/*
* Defined Response Data Formats
*
* RDF_LEVEL0 means that this structure complies with SCSI-1 spec.
*
* RDF_CCS means that this structure complies with CCS pseudo-spec.
*
* RDF_SCSI2 means that the structure complies with the SCSI-2/3 spec.
*/
#define RDF_LEVEL0 0x00
#define RDF_CCS 0x01
#define RDF_SCSI2 0x02
#ifdef __cplusplus
}
#endif
/*
* Include in implementation specifuc
* (non-generic) inquiry definitions.
*/
#include <sys/scsi/impl/inquiry.h>
#endif /* _SYS_SCSI_GENERIC_INQUIRY_H */