smb.h revision a90cf9f29973990687fa61de9f1f6ea22e924e40
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright 2013 Nexenta Systems, Inc. All rights reserved.
*/
#ifndef _SMBSRV_SMB_H
#define _SMBSRV_SMB_H
/*
* SMB definitions and interfaces, mostly defined in the SMB and CIFS specs.
*/
#include <smb/ntstatus.h>
#include <smb/doserror.h>
#include <smbsrv/ntaccess.h>
/*
* Macintosh Extensions for CIFS
*/
#include <smbsrv/mac_cifs.h>
/*
* NT Installable File System (IFS) interface.
*/
#ifdef __cplusplus
extern "C" {
#endif
/*
* The msgbuf format and length of an SMB header.
*/
#define SMB_HEADER_DOS_FMT "Mbbbwbww10.wwww"
#define SMB_HEADER_NT_FMT "Mblbww#c2.wwww"
#define SMB_HEADER_LEN 32
#define SMB_HEADER_ED_FMT "Mbbbwbww8c2.wwww"
#define SMB_TRANSHDR_ED_FMT "wwwwb.wl2.wwwwb."
#define SMB_TRANSSHDR_ED_FMT "wwwwwwwww"
#define SMB_TRANS2SHDR_ED_FMT "wwwwwwwww"
/* There is something wrong with this. Should be 38 bytes. It is 37 bytes */
#define SMB_NT_TRANSHDR_ED_FMT "b2.llllllllbw"
/*
* CIFS definition for the SMB header (CIFS Section 3.2). Note that the
* pid_high field is not documented in the 1997 CIFS specificaction. This
* is a decoded or memory-based definition, which may be padded to align
* its elements on word boundaries. See smb_hdrbuf_t for the network
* ready structure.
*/
typedef struct smb_hdr {
union {
struct {
} dos_error;
} status;
union {
struct {
} extra;
} extra;
} smb_hdr_t;
/*
* Encoded or packed SMB header in network ready format.
*/
typedef struct smb_hdrbuf {
} smb_hdrbuf_t;
/*
* Protocol magic value as a 32-bit. This will be 0xff 0x53 0x4d 0x42 on
* the wire.
*/
#define SMB_PROTOCOL_MAGIC 0x424d53ff
#define SMB2_PROTOCOL_MAGIC 0x424d53fe
/*
* Time and date encoding (CIFS Section 3.6). The date is encoded such
* that the year has a range of 0-119, which represents 1980-2099. The
* month range is 1-12, and the day range is 1-31.
*/
typedef struct smb_date {
} smb_date_t;
/*
* The hours range is 0-23, the minutes range is 0-59 and the two_sec
* range is 0-29.
*/
typedef struct smb_time {
} smb_time_t;
/*
* This is a 64-bit signed absolute time representing 100ns increments.
* A positive value represents the absolute time since 1601AD. A
* negative value represents a context specific relative time.
*/
typedef struct smb_time2 {
} smb_time2_t;
/*
* The number of seconds since Jan 1, 1970, 00:00:00.0.
*/
typedef uint32_t smb_utime_t;
#define SMB_LM_NEGOTIATE_WORDCNT 13
#define SMB_NT_NEGOTIATE_WORDCNT 17
#define SMB_NAME83_EXTLEN 3
#define SMB_NAME83_BASELEN 8
#define SMB_NAME83_LEN 12
/* Share types */
#ifndef _SHARE_TYPES_DEFINED_
#define _SHARE_TYPES_DEFINED_
#define STYPE_DISKTREE 0x00000000
#define STYPE_PRINTQ 0x00000001
#define STYPE_DEVICE 0x00000002
#define STYPE_IPC 0x00000003
#define STYPE_MASK 0x0000000F
#define STYPE_DFS 0x00000064
#define STYPE_HIDDEN 0x80000000
#define STYPE_SPECIAL 0x80000000
#endif /* _SHARE_TYPES_DEFINED_ */
/*
* NtCreateAndX and NtTransactCreate creation flags: defined in CIFS
* section 4.2.2
*
* Creation Flag Name Value Description
* ========================== ====== ==================================
* NT_CREATE_REQUEST_OPLOCK 0x02 Level I oplock requested
* NT_CREATE_REQUEST_OPBATCH 0x04 Batch oplock requested
* NT_CREATE_OPEN_TARGET_DIR 0x08 Target for open is a directory
*/
#define NT_CREATE_FLAG_REQUEST_OPLOCK 0x02
#define NT_CREATE_FLAG_REQUEST_OPBATCH 0x04
#define NT_CREATE_FLAG_OPEN_TARGET_DIR 0x08
/*
* Define the filter flags for NtNotifyChangeDirectoryFile
*/
#define FILE_NOTIFY_CHANGE_FILE_NAME 0x00000001
#define FILE_NOTIFY_CHANGE_DIR_NAME 0x00000002
#define FILE_NOTIFY_CHANGE_NAME 0x00000003
#define FILE_NOTIFY_CHANGE_ATTRIBUTES 0x00000004
#define FILE_NOTIFY_CHANGE_SIZE 0x00000008
#define FILE_NOTIFY_CHANGE_LAST_WRITE 0x00000010
#define FILE_NOTIFY_CHANGE_LAST_ACCESS 0x00000020
#define FILE_NOTIFY_CHANGE_CREATION 0x00000040
#define FILE_NOTIFY_CHANGE_EA 0x00000080
#define FILE_NOTIFY_CHANGE_SECURITY 0x00000100
#define FILE_NOTIFY_CHANGE_STREAM_NAME 0x00000200
#define FILE_NOTIFY_CHANGE_STREAM_SIZE 0x00000400
#define FILE_NOTIFY_CHANGE_STREAM_WRITE 0x00000800
#define FILE_NOTIFY_VALID_MASK 0x00000fff
/*
* Define the file action type codes for NtNotifyChangeDirectoryFile
*/
#define FILE_ACTION_ADDED 0x00000001
#define FILE_ACTION_REMOVED 0x00000002
#define FILE_ACTION_MODIFIED 0x00000003
#define FILE_ACTION_RENAMED_OLD_NAME 0x00000004
#define FILE_ACTION_RENAMED_NEW_NAME 0x00000005
#define FILE_ACTION_ADDED_STREAM 0x00000006
#define FILE_ACTION_REMOVED_STREAM 0x00000007
#define FILE_ACTION_MODIFIED_STREAM 0x00000008
/*
* Note: These action values are not from MS-FSCC.
* FILE_ACTION_SUBDIR_CHANGED is used internally for
* "watch tree" support, posted to all parents of a
* directory that had one of the changes above.
* FILE_ACTION_DELETE_PENDING is used internally to tell
* notify change requests when the "delete-on-close" flag
* has been set on the directory being watched.
*/
#define FILE_ACTION_SUBDIR_CHANGED 0x00000009
#define FILE_ACTION_DELETE_PENDING 0x0000000a
/* Lock type flags */
#define LOCKING_ANDX_NORMAL_LOCK 0x00
#define LOCKING_ANDX_SHARED_LOCK 0x01
#define LOCKING_ANDX_OPLOCK_RELEASE 0x02
#define LOCKING_ANDX_CHANGE_LOCK_TYPE 0x04
#define LOCKING_ANDX_CANCEL_LOCK 0x08
#define LOCKING_ANDX_LARGE_FILES 0x10
#define SMB_COM_CREATE_DIRECTORY 0x00
#define SMB_COM_DELETE_DIRECTORY 0x01
#define SMB_COM_OPEN 0x02
#define SMB_COM_CREATE 0x03
#define SMB_COM_CLOSE 0x04
#define SMB_COM_FLUSH 0x05
#define SMB_COM_DELETE 0x06
#define SMB_COM_RENAME 0x07
#define SMB_COM_QUERY_INFORMATION 0x08
#define SMB_COM_SET_INFORMATION 0x09
#define SMB_COM_READ 0x0A
#define SMB_COM_WRITE 0x0B
#define SMB_COM_LOCK_BYTE_RANGE 0x0C
#define SMB_COM_UNLOCK_BYTE_RANGE 0x0D
#define SMB_COM_CREATE_TEMPORARY 0x0E
#define SMB_COM_CREATE_NEW 0x0F
#define SMB_COM_CHECK_DIRECTORY 0x10
#define SMB_COM_PROCESS_EXIT 0x11
#define SMB_COM_SEEK 0x12
#define SMB_COM_LOCK_AND_READ 0x13
#define SMB_COM_WRITE_AND_UNLOCK 0x14
#define SMB_COM_READ_RAW 0x1A
#define SMB_COM_READ_MPX 0x1B
#define SMB_COM_READ_MPX_SECONDARY 0x1C
#define SMB_COM_WRITE_RAW 0x1D
#define SMB_COM_WRITE_MPX 0x1E
#define SMB_COM_WRITE_MPX_SECONDARY 0x1F
#define SMB_COM_WRITE_COMPLETE 0x20
#define SMB_COM_SET_INFORMATION2 0x22
#define SMB_COM_QUERY_INFORMATION2 0x23
#define SMB_COM_LOCKING_ANDX 0x24
#define SMB_COM_TRANSACTION 0x25
#define SMB_COM_TRANSACTION_SECONDARY 0x26
#define SMB_COM_IOCTL 0x27
#define SMB_COM_IOCTL_SECONDARY 0x28
#define SMB_COM_COPY 0x29
#define SMB_COM_MOVE 0x2A
#define SMB_COM_ECHO 0x2B
#define SMB_COM_WRITE_AND_CLOSE 0x2C
#define SMB_COM_OPEN_ANDX 0x2D
#define SMB_COM_READ_ANDX 0x2E
#define SMB_COM_WRITE_ANDX 0x2F
#define SMB_COM_CLOSE_AND_TREE_DISC 0x31
#define SMB_COM_TRANSACTION2 0x32
#define SMB_COM_TRANSACTION2_SECONDARY 0x33
#define SMB_COM_FIND_CLOSE2 0x34
#define SMB_COM_FIND_NOTIFY_CLOSE 0x35
#define SMB_COM_TREE_CONNECT 0x70
#define SMB_COM_TREE_DISCONNECT 0x71
#define SMB_COM_NEGOTIATE 0x72
#define SMB_COM_SESSION_SETUP_ANDX 0x73
#define SMB_COM_LOGOFF_ANDX 0x74
#define SMB_COM_TREE_CONNECT_ANDX 0x75
#define SMB_COM_QUERY_INFORMATION_DISK 0x80
#define SMB_COM_SEARCH 0x81
#define SMB_COM_FIND 0x82
#define SMB_COM_FIND_UNIQUE 0x83
#define SMB_COM_FIND_CLOSE 0x84
#define SMB_COM_NT_TRANSACT 0xA0
#define SMB_COM_NT_TRANSACT_SECONDARY 0xA1
#define SMB_COM_NT_CREATE_ANDX 0xA2
#define SMB_COM_NT_CANCEL 0xA4
#define SMB_COM_OPEN_PRINT_FILE 0xC0
#define SMB_COM_WRITE_PRINT_FILE 0xC1
#define SMB_COM_CLOSE_PRINT_FILE 0xC2
#define SMB_COM_GET_PRINT_QUEUE 0xC3
#define SMB_COM_NUM 0x100
/*
* Flags field of the SMB header. The names in parenthesis represent
* alternative names for the flags.
*
* SMB_FLAGS_LOCK_AND_READ_OK If the server supports LockAndRead and
* (SMB_FLAGS_LOCKS_SUBDIALECT) WriteAndUnlock, it sets this bit in the
* Negotiate response.
*
* SMB_FLAGS_SEND_NO_ACK When on, the client guarantees that there
* (SMB_FLAGS_RCV_BUF_POSTED) is a receive buffer posted such that a
* "Send-No-Ack" can be used by the server
* to respond to the client's request.
*
* SMB_FLAGS_CASE_INSENSITIVE This is part of the Flags field of every
* SMB header. If this bit is set, then all
* pathnames in the SMB should be treated as
* case-insensitive. Otherwise pathnames are
* case-sensitive.
*
* SMB_FLAGS_CANONICALIZED_PATHS When on in SessionSetupX, this indicates
* that all paths sent to the server are
* already in OS/2 canonicalized format.
*
* are valid characters, . and .. have been removed and single backslashes
* are used as separators.
*
* SMB_FLAGS_OPLOCK When set in an open file request SMBs
* (Open, Create, OpenX, etc.) this bit
* indicates a request for an oplock on the
* file. When set in the response, this bit
* indicates that the oplock was granted.
*
* SMB_FLAGS_OPLOCK_NOTIFY_ANY When on, this bit indicates that the server
* should notify the client on any request
* that could cause the file to be changed.
* If not set, the server only notifies the
* client on other open requests on the file.
* This bit is only relevant when
* SMB_FLAGS_OPLOCK is set.
*
* SMB_FLAGS_SERVER_TO_REDIR This bit indicates that the SMB is being
* (SMB_FLAGS_REPLY) sent from server to (client) redirector.
*/
#define SMB_FLAGS_LOCK_AND_READ_OK 0x01
#define SMB_FLAGS_SEND_NO_ACK 0x02
#define SMB_FLAGS_RESERVED 0x04
#define SMB_FLAGS_CASE_INSENSITIVE 0x08
#define SMB_FLAGS_CANONICALIZED_PATHS 0x10
#define SMB_FLAGS_OPLOCK 0x20
#define SMB_FLAGS_OPLOCK_NOTIFY_ANY 0x40
#define SMB_FLAGS_REPLY 0x80
/*
* Flags2 field of the SMB header.
*
* SMB_FLAGS2_READ_IF_EXECUTE is also known as SMB_FLAGS2_PAGING_IO
*/
#define SMB_FLAGS2_KNOWS_LONG_NAMES 0x0001
#define SMB_FLAGS2_KNOWS_EAS 0x0002
#define SMB_FLAGS2_SMB_SECURITY_SIGNATURE 0x0004
#define SMB_FLAGS2_IS_LONG_NAME 0x0040
#define SMB_FLAGS2_REPARSE_PATH 0x0400
#define SMB_FLAGS2_EXT_SEC 0x0800
#define SMB_FLAGS2_DFS 0x1000
#define SMB_FLAGS2_READ_IF_EXECUTE 0x2000
#define SMB_FLAGS2_NT_STATUS 0x4000
#define SMB_FLAGS2_UNICODE 0x8000
#define DIALECT_UNKNOWN 0
/*
* SMB_TREE_CONNECT_ANDX OptionalSupport flags
*
* SMB_SUPPORT_SEARCH_BITS The server supports SearchAttributes.
* SMB_SHARE_IS_IN_DFS The share is managed by DFS.
* SMB_CSC_MASK Offline-caching mask - see CSC values.
* SMB_UNIQUE_FILE_NAME The server uses long names and does not support
* short names. This indicates to clients that
* they may perform directory name-space caching.
* SMB_EXTENDED_SIGNATURES The server will use signing key protection.
*
* SMB_CSC_CACHE_MANUAL_REINT Clients are allowed to cache files for offline
* use as requested by users but automatic
* file-by-file reintegration is not allowed.
* SMB_CSC_CACHE_AUTO_REINT Clients are allowed to automatically cache
* files for offline use and file-by-file
* reintegration is allowed.
* SMB_CSC_CACHE_VDO Clients are allowed to automatically cache files
* for offline use, file-by-file reintegration is
* allowed and clients are permitted to work from
* their local cache even while offline.
* SMB_CSC_CACHE_NONE Client-side caching is disabled for this share.
*
* SHI1005_FLAGS_ACCESS_BASED_DIRECTORY_ENUM
* The server will filter directory entries based
* on the access permissions of the client.
*/
#define SMB_SUPPORT_SEARCH_BITS 0x0001
#define SMB_SHARE_IS_IN_DFS 0x0002
#define SMB_CSC_MASK 0x000C
#define SMB_UNIQUE_FILE_NAME 0x0010
#define SMB_EXTENDED_SIGNATURES 0x0020
#define SMB_CSC_CACHE_MANUAL_REINT 0x0000
#define SMB_CSC_CACHE_AUTO_REINT 0x0004
#define SMB_CSC_CACHE_VDO 0x0008
#define SMB_CSC_CACHE_NONE 0x000C
#define SHI1005_FLAGS_ACCESS_BASED_DIRECTORY_ENUM 0x0800
#define SHI1005_FLAGS_ALLOW_NAMESPACE_CACHING 0x0400
/*
* The subcommand codes, placed in SETUP[0], for named pipe operations are:
* SubCommand Code Value Description
* =================== ===== =========================================
*/
/*
* Setup[0] Transaction2 Value Description
* Subcommand Code
* ========================== ===== =============================
*/
/*
* Access Mode Encoding (CIFS/1.0 1996 Section 3.8).
*
* The desired access mode passed in SmbOpen and SmbOpenAndX has the following
* mapping:
*
* 1111 11
* 5432 1098 7654 3210
* rWrC rLLL rSSS rAAA
*
* where:
*
* W - Write through mode. No read ahead or write behind allowed on
* this file or device. When protocol is returned, data is expected
* to be on the disk or device.
*
* S - Sharing mode:
* 0 - Compatibility mode (as in core open)
* 2 - Deny write
* 4 - Deny none
*
* A - Access mode
* 0 - Open for reading
* 1 - Open for writing
* 2 - Open for reading and writing
* 3 - Open for execute
*
* rSSSrAAA = 11111111 (hex FF) indicates FCB open (as in core protocol)
*
* C - Cache mode
* 0 - Normal file
* 1 - Do not cache this file
*
* L - Locality of reference
* 0 - Locality of reference is unknown
* 1 - Mainly sequential access
* 2 - Mainly random access
* 3 - Random access with some locality
* 4 to 7 - Currently undefined
*/
#define SMB_DA_SHARE_MASK 0x70
#define SMB_DA_ACCESS_MASK 0x07
#define SMB_DA_ACCESS_READ 0x00
#define SMB_DA_ACCESS_WRITE 0x01
#define SMB_DA_ACCESS_READ_WRITE 0x02
#define SMB_DA_ACCESS_EXECUTE 0x03
#define SMB_DA_SHARE_COMPATIBILITY 0x00
#define SMB_DA_SHARE_EXCLUSIVE 0x10
#define SMB_DA_SHARE_DENY_WRITE 0x20
#define SMB_DA_SHARE_DENY_READ 0x30
#define SMB_DA_SHARE_DENY_NONE 0x40
#define SMB_CACHE_NORMAL 0x0000
#define SMB_DO_NOT_CACHE 0x1000
#define SMB_LR_UNKNOWN 0x0000
#define SMB_LR_SEQUENTIAL 0x0100
#define SMB_LR_RANDOM 0x0200
#define SMB_LR_RANDOM_WITH_LOCALITY 0x0300
#define SMB_LR_MASK 0x0F00
#define SMB_DA_WRITE_THROUGH 0x4000
/*
* Macros used for share reservation rule checking
*/
#define SMB_DENY_RW(share_access) \
/*
* The SMB open function determines what action should be taken depending
* on the existence or lack thereof of files used in the operation. It
* has the following mapping:
*
* 1111 1
* 5432 1098 7654 3210
* rrrr rrrr rrrC rrOO
*
* where:
*
* O - Open (action to be taken if the target file exists)
* 0 - Fail
* 1 - Open or Append file
* 2 - Truncate file
*
* C - Create (action to be taken if the target file does not exist)
* 0 - Fail
* 1 - Create file
*/
#define SMB_OFUN_OPEN_MASK 0x3
#define SMB_OFUN_CREATE_MASK 0x10
#define SMB_OFUN_OPEN_FAIL 0
#define SMB_OFUN_OPEN_APPEND 1
#define SMB_OFUN_OPEN_OPEN 1
#define SMB_OFUN_OPEN_TRUNCATE 2
#define SMB_OFUN_CREATE_FAIL 0x00
#define SMB_OFUN_CREATE_CREATE 0x10
/*
* The Action field of OpenAndX has the following format:
*
* 1111 11
* 5432 1098 7654 3210
* Lrrr rrrr rrrr rrOO
*
* where:
*
* L - Opportunistic lock. 1 if lock granted, else 0.
*
* O - Open action:
* 1 - The file existed and was opened
* 2 - The file did not exist but was created
* 3 - The file existed and was truncated
*/
#define SMB_OACT_LOCK 0x8000
#define SMB_OACT_OPENED 0x01
#define SMB_OACT_CREATED 0x02
#define SMB_OACT_TRUNCATED 0x03
#define SMB_OACT_OPLOCK 0x8000
#define SMB_FTYPE_DISK 0
#define SMB_FTYPE_BYTE_PIPE 1
#define SMB_FTYPE_MESG_PIPE 2
#define SMB_FTYPE_PRINTER 3
#define SMB_FTYPE_UNKNOWN 0xFFFF
#define SMB_DEVST_BLOCKING 0x8000
#define SMB_DEVST_ENDPOINT 0x4000
#define SMB_DEVST_TYPE_MASK 0x0C00
#define SMB_DEVST_TYPE_BYTE_PIPE 0x0000
#define SMB_DEVST_TYPE_MESG_PIPE 0x0400
#define SMB_DEVST_RMODE_MASK 0x0300
#define SMB_DEVST_RMODE_BYTES 0x0000
#define SMB_DEVST_RMODE_MESGS 0x0100
#define SMB_FTYPE_IS_DISK(F) ((F) == SMB_FTYPE_DISK)
#define SMB_FTYPE_IS_PIPE(F) \
(((F) == SMB_FTYPE_BYTE_PIPE) || ((F) == SMB_FTYPE_MESG_PIPE))
#define SMB_FTYPE_IS_PRINTER(F) ((F) == SMB_FTYPE_PRINTER)
/*
* TRANS2_FIND
*/
#define SMB_FIND_FILE_DIRECTORY_INFO 0x101
#define SMB_FIND_FILE_FULL_DIRECTORY_INFO 0x102
#define SMB_FIND_FILE_NAMES_INFO 0x103
#define SMB_FIND_FILE_BOTH_DIRECTORY_INFO 0x104
#define SMB_FIND_FILE_ID_FULL_DIRECTORY_INFO 0x105
#define SMB_FIND_FILE_ID_BOTH_DIRECTORY_INFO 0x106
/*
* Flags for TRANS2_FIND_FIRST2 and TRANS2_FIND_NEXT2 (NTDDK).
*
* If SMB_FIND_RETURN_RESUME_KEYS was set in the request parameters,
* each entry is preceded by a four-byte resume key.
*/
#define SMB_FIND_CLOSE_AFTER_REQUEST 0x01
#define SMB_FIND_CLOSE_AT_EOS 0x02
#define SMB_FIND_RETURN_RESUME_KEYS 0x04
#define SMB_FIND_CONTINUE_FROM_LAST 0x08
#define SMB_FIND_WITH_BACKUP_INTENT 0x10
/*
* TRANS2_QUERY_FS_INFORMATION
*
* SMB_QUERY_FS_QUOTA_INFO, SMB_QUERY_FS_CONTROL_INFO are not used in Windows
* NT, and are not used in any post NT Windows operating systems. If a server
* receives these information levels from a client, it should handle them as
* invalid information levels.
*/
#define SMB_INFO_ALLOCATION 1
#define SMB_INFO_VOLUME 2
#define SMB_QUERY_FS_LABEL_INFO 0x101
#define SMB_QUERY_FS_VOLUME_INFO 0x102
#define SMB_QUERY_FS_SIZE_INFO 0x103
#define SMB_QUERY_FS_DEVICE_INFO 0x104
#define SMB_QUERY_FS_ATTRIBUTE_INFO 0x105
#define SMB_QUERY_FS_QUOTA_INFO 0x106
#define SMB_QUERY_FS_CONTROL_INFO 0x107
/*
* Internal use only.
* Define information levels to represent the following requests:
* smb_query_information
* smb_query_information2
* smb_set_information
* smb_set_information2
*/
#define SMB_QUERY_INFORMATION 0x3001
#define SMB_QUERY_INFORMATION2 0x3002
#define SMB_SET_INFORMATION 0x3001
#define SMB_SET_INFORMATION2 0x3002
/* TRANS2_QUERY_{PATH,FILE}_INFORMATION */
#define SMB_QUERY_FILE_BASIC_INFO 0x101
#define SMB_QUERY_FILE_STANDARD_INFO 0x102
#define SMB_QUERY_FILE_EA_INFO 0x103
#define SMB_QUERY_FILE_NAME_INFO 0x104
#define SMB_QUERY_FILE_ALL_INFO 0x107
#define SMB_QUERY_FILE_ALT_NAME_INFO 0x108
#define SMB_QUERY_FILE_STREAM_INFO 0x109
#define SMB_QUERY_FILE_COMPRESSION_INFO 0x10B
#define SMB_MAC_DT_ADD_APPL MAC_DT_ADD_APPL
#define SMB_MAC_DT_GET_APPL MAC_DT_GET_APPL
#define SMB_MAC_DT_GET_ICON MAC_DT_GET_ICON
#define SMB_MAC_DT_ADD_ICON MAC_DT_ADD_ICON
#define SMB_SET_FILE_BASIC_INFO 0x101
#define SMB_SET_FILE_DISPOSITION_INFO 0x102
#define SMB_SET_FILE_ALLOCATION_INFO 0x103
#define SMB_SET_FILE_END_OF_FILE_INFO 0x104
/* NT passthrough levels - see ntifs.h FILE_INFORMATION_CLASS */
#define SMB_FILE_BASIC_INFORMATION 1004
#define SMB_FILE_STANDARD_INFORMATION 1005
#define SMB_FILE_INTERNAL_INFORMATION 1006
#define SMB_FILE_EA_INFORMATION 1007
#define SMB_FILE_ACCESS_INFORMATION 1008
#define SMB_FILE_NAME_INFORMATION 1009
#define SMB_FILE_RENAME_INFORMATION 1010
#define SMB_FILE_LINK_INFORMATION 1011
#define SMB_FILE_DISPOSITION_INFORMATION 1013
#define SMB_FILE_ALL_INFORMATION 1018
#define SMB_FILE_ALLOCATION_INFORMATION 1019
#define SMB_FILE_END_OF_FILE_INFORMATION 1020
#define SMB_FILE_ALT_NAME_INFORMATION 1021
#define SMB_FILE_STREAM_INFORMATION 1022
#define SMB_FILE_COMPRESSION_INFORMATION 1028
#define SMB_FILE_NETWORK_OPEN_INFORMATION 1034
#define SMB_FILE_ATTR_TAG_INFORMATION 1035
/* NT passthrough levels - see ntifs.h FILE_FS_INFORMATION_CLASS */
#define SMB_FILE_FS_VOLUME_INFORMATION 1001
#define SMB_FILE_FS_LABEL_INFORMATION 1002
#define SMB_FILE_FS_SIZE_INFORMATION 1003
#define SMB_FILE_FS_DEVICE_INFORMATION 1004
#define SMB_FILE_FS_ATTRIBUTE_INFORMATION 1005
#define SMB_FILE_FS_CONTROL_INFORMATION 1006
#define SMB_FILE_FS_FULLSIZE_INFORMATION 1007
#define SMB_FILE_FS_OBJECTID_INFORMATION 1008
#define SMB_FILE_FS_DRIVERPATH_INFORMATION 1009
/*
* The following bits may be set in the SecurityMode field of the
* SMB_COM_NEGOTIATE response.
*
* Note: Same as the NTDDK definitions.
*/
#define NEGOTIATE_USER_SECURITY 0x01
#define NEGOTIATE_ENCRYPT_PASSWORDS 0x02
#define NEGOTIATE_SECURITY_SIGNATURES_ENABLED 0x04
#define NEGOTIATE_SECURITY_SIGNATURES_REQUIRED 0x08
/*
* Negotiated Capabilities (CIFS/1.0 section 4.1.1)
*
* Capabilities allow the server to tell the client what it supports.
* Undefined bits MUST be set to zero by servers, and MUST be ignored
* by clients. The bit definitions are:
*
* Capability Name Encoding Meaning
* ==================== ======== ==================================
* CAP_RAW_MODE 0x0001 The server supports SMB_COM_READ_RAW and
* SMB_COM_WRITE_RAW (obsolescent)
* CAP_MPX_MODE 0x0002 The server supports SMB_COM_READ_MPX and
* SMB_COM_WRITE_MPX (obsolescent)
* CAP_UNICODE 0x0004 The server supports Unicode strings
* CAP_LARGE_FILES 0x0008 The server supports large files with 64
* bit offsets
* CAP_NT_SMBS 0x0010 The server supports the SMBs particular
* to the NT LM 0.12 dialect.
* Implies CAP_NT_FIND.
* CAP_RPC_REMOTE_APIS 0x0020 The server supports remote admin API
* requests via DCE RPC
* CAP_STATUS32 0x0040 The server can respond with 32 bit
* status codes in Status.Status
* CAP_LEVEL_II_OPLOCKS 0x0080 The server supports level 2 oplocks
* CAP_LOCK_AND_READ 0x0100 The server supports the
* SMB_COM_LOCK_AND_READ SMB
* CAP_NT_FIND 0x0200
* CAP_BULK_TRANSFER 0x0400
* CAP_COMPRESSED_BULK 0x0800
* CAP_DFS 0x1000 The server is DFS aware
* CAP_INFOLEVEL_PASSTHRU 0x2000 The server supports passthru information
* level processing capability.
* CAP_LARGE_READX 0x4000 The server supports large
* SMB_COM_READ_ANDX
* CAP_LARGE_WRITEX 0x8000 The server supports large
* SMB_COM_WRITE_ANDX
* CAP_RESERVED 0x02000000 Reserved for future use.
* CAP_EXTENDED_SECURITY 0x80000000 The server supports extended security
* exchanges.
*
* Extended security exchanges provides a means of supporting arbitrary
* authentication protocols within CIFS. Security blobs are opaque to the
* CIFS protocol; they are messages in some authentication protocol that
* has been agreed upon by client and server by some out of band mechanism,
* for which CIFS merely functions as a transport. When
* CAP_EXTENDED_SECURITY is negotiated, the server includes a first
* security blob in its response; subsequent security blobs are exchanged
* in SMB_COM_SESSION_SETUP_ANDX requests and responses until the
* authentication protocol terminates.
*/
#define CAP_RAW_MODE 0x0001
#define CAP_MPX_MODE 0x0002
#define CAP_UNICODE 0x0004
#define CAP_LARGE_FILES 0x0008
#define CAP_NT_SMBS 0x0010
#define CAP_RPC_REMOTE_APIS 0x0020
#define CAP_STATUS32 0x0040
#define CAP_LEVEL_II_OPLOCKS 0x0080
#define CAP_LOCK_AND_READ 0x0100
#define CAP_NT_FIND 0x0200
#define CAP_BULK_TRANSFER 0x0400
#define CAP_COMPRESSED_BULK 0x0800
#define CAP_DFS 0x1000
#define CAP_INFOLEVEL_PASSTHRU 0x2000
#define CAP_LARGE_READX 0x4000
#define CAP_LARGE_WRITEX 0x8000
#define CAP_RESERVED 0x02000000
#define CAP_EXTENDED_SECURITY 0x80000000
/*
* Different device types according to NT
*/
#define FILE_DEVICE_BEEP 0x00000001
#define FILE_DEVICE_CD_ROM 0x00000002
#define FILE_DEVICE_CD_ROM_FILE_SYSTEM 0x00000003
#define FILE_DEVICE_CONTROLLER 0x00000004
#define FILE_DEVICE_DATALINK 0x00000005
#define FILE_DEVICE_DFS 0x00000006
#define FILE_DEVICE_DISK 0x00000007
#define FILE_DEVICE_DISK_FILE_SYSTEM 0x00000008
#define FILE_DEVICE_FILE_SYSTEM 0x00000009
#define FILE_DEVICE_INPORT_PORT 0x0000000a
#define FILE_DEVICE_KEYBOARD 0x0000000b
#define FILE_DEVICE_MAILSLOT 0x0000000c
#define FILE_DEVICE_MIDI_IN 0x0000000d
#define FILE_DEVICE_MIDI_OUT 0x0000000e
#define FILE_DEVICE_MOUSE 0x0000000f
#define FILE_DEVICE_MULTI_UNC_PROVIDER 0x00000010
#define FILE_DEVICE_NAMED_PIPE 0x00000011
#define FILE_DEVICE_NETWORK 0x00000012
#define FILE_DEVICE_NETWORK_BROWSER 0x00000013
#define FILE_DEVICE_NETWORK_FILE_SYSTEM 0x00000014
#define FILE_DEVICE_NULL 0x00000015
#define FILE_DEVICE_PARALLEL_PORT 0x00000016
#define FILE_DEVICE_PHYSICAL_NETCARD 0x00000017
#define FILE_DEVICE_PRINTER 0x00000018
#define FILE_DEVICE_SCANNER 0x00000019
#define FILE_DEVICE_SERIAL_MOUSE_PORT 0x0000001a
#define FILE_DEVICE_SERIAL_PORT 0x0000001b
#define FILE_DEVICE_SCREEN 0x0000001c
#define FILE_DEVICE_SOUND 0x0000001d
#define FILE_DEVICE_STREAMS 0x0000001e
#define FILE_DEVICE_TAPE 0x0000001f
#define FILE_DEVICE_TAPE_FILE_SYSTEM 0x00000020
#define FILE_DEVICE_TRANSPORT 0x00000021
#define FILE_DEVICE_UNKNOWN 0x00000022
#define FILE_DEVICE_VIDEO 0x00000023
#define FILE_DEVICE_VIRTUAL_DISK 0x00000024
#define FILE_DEVICE_WAVE_IN 0x00000025
#define FILE_DEVICE_WAVE_OUT 0x00000026
#define FILE_DEVICE_8042_PORT 0x00000027
#define FILE_DEVICE_NETWORK_REDIRECTOR 0x00000028
#define FILE_DEVICE_BATTERY 0x00000029
#define FILE_DEVICE_BUS_EXTENDER 0x0000002a
#define FILE_DEVICE_MODEM 0x0000002b
#define FILE_DEVICE_VDM 0x0000002c
/*
* Some of these device types are not currently accessible over the network
* and may never be accessible over the network. Some may change to be
*
* accessible over the network. The values for device types that may never
* be accessible over the network may be redefined to be just reserved at
* some date in the future.
*
* Characteristics is the sum of any of the following:
*/
#define FILE_REMOVABLE_MEDIA 0x00000001
#define FILE_READ_ONLY_DEVICE 0x00000002
#define FILE_FLOPPY_DISKETTE 0x00000004
#define FILE_WRITE_ONE_MEDIA 0x00000008
#define FILE_REMOTE_DEVICE 0x00000010
#define FILE_DEVICE_IS_MOUNTED 0x00000020
#define FILE_VIRTUAL_VOLUME 0x00000040
/*
* File System Control Flags for smb_com_trans2_query|set_fs_information
* level SMB_FILE_FS_CONTROL_INFORMATION
*/
#define FILE_VC_QUOTA_TRACK 0x00000001
#define FILE_VC_QUOTA_ENFORCE 0x00000002
#define FILE_VC_CONTENT_INDEX_DISABLED 0x00000008
#define FILE_VC_LOG_QUOTA_THRESHOLD 0x00000010
#define FILE_VC_LOG_QUOTA_LIMIT 0x00000020
#define FILE_VC_LOG_VOLUME_THRESHOLD 0x00000040
#define FILE_VC_LOG_VOLUME_LIMIT 0x00000080
#define FILE_VC_QUOTAS_INCOMPLETE 0x00000100
#define FILE_VC_QUOTAS_REBUILDING 0x00000200
/*
* CREATE_ANDX ShareAccess Flags
*/
#define FILE_SHARE_NONE 0x00000000
#define FILE_SHARE_READ 0x00000001
#define FILE_SHARE_WRITE 0x00000002
#define FILE_SHARE_DELETE 0x00000004
#define FILE_SHARE_ALL 0x00000007
#define FILE_SHARE_VALID_FLAGS 0x00000007
/*
* CREATE_ANDX CreateDisposition flags
*
* FILE_SUPERSEDE If the file already exists it should be superseded
* by the specified file. If the file does not already
* exist then it should be created.
*
* FILE_CREATE If the file already exists the operation should fail.
* If the file does not already exist then it should be
* created. (aka CREATE_NEW)
*
* FILE_OPEN If the file already exists then it should be opened.
* If the file does not already exist then the operation
* should fail. (aka OPEN_EXISTING)
*
* FILE_OPEN_IF If the file already exists then it should be opened.
* If the file does not already exist then it should be
* created. (aka OPEN_ALWAYS)
*
* FILE_OVERWRITE If the file already exists, it should be opened and
* overwritten. If the file does not already exist then
* the operation should fail. (aka TRUNCATE_EXISTING)
*
* FILE_OVERWRITE_IF If the file already exists, it should be opened and
* overwritten. If the file does not already exist then
* it should be created. (aka CREATE_ALWAYS)
*/
#define FILE_SUPERSEDE 0x00000000
#define FILE_OPEN 0x00000001
#define FILE_CREATE 0x00000002
#define FILE_OPEN_IF 0x00000003
#define FILE_OVERWRITE 0x00000004
#define FILE_OVERWRITE_IF 0x00000005
#define FILE_MAXIMUM_DISPOSITION 0x00000005
/*
* CREATE_ANDX Impersonation levels
*/
#define SECURITY_ANONYMOUS 0x00000001
#define SECURITY_IDENTIFICATION 0x00000002
#define SECURITY_IMPERSONATION 0x00000003
#define SECURITY_DELEGATION 0x00000004
/*
* CREATE_ANDX SecurityFlags
*/
#define SECURITY_CONTEXT_TRACKING 0x00000001
#define SECURITY_EFFECTIVE_ONLY 0x00000002
/*
* Server types
*/
#define PRQ_ACTIVE 0 /* Active */
#define PRJ_QS_QUEUED 0 /* Active */
/*
* SMB_COM_NT_TRANSACTION sub-command codes (CIFS/1.0 section 5.3)
*
* SubCommand Code Value Description
* =============================== ===== =================================
* NT_TRANSACT_IOCTL 2 Device IOCTL
* NT_TRANSACT_SET_SECURITY_DESC 3 Set security descriptor
* NT_TRANSACT_NOTIFY_CHANGE 4 Start directory watch
* NT_TRANSACT_RENAME 5 Reserved (handle-based rename)
* NT_TRANSACT_QUERY_SECURITY_DESC 6 Retrieve security descriptor
* NT_TRANSACT_QUERY_QUOTA 7 Retrieve quota information
* NT_TRANSACT_SET_QUOTA 8 Set quota information
*/
#define NT_TRANSACT_MIN_FUNCTION 1
#define NT_TRANSACT_CREATE 1
#define NT_TRANSACT_IOCTL 2
#define NT_TRANSACT_SET_SECURITY_DESC 3
#define NT_TRANSACT_NOTIFY_CHANGE 4
#define NT_TRANSACT_RENAME 5
#define NT_TRANSACT_QUERY_SECURITY_DESC 6
#define NT_TRANSACT_QUERY_QUOTA 7
#define NT_TRANSACT_SET_QUOTA 8
#define NT_TRANSACT_MAX_FUNCTION 8
/*
* Pipe states
*/
#define SMB_PIPE_READMODE_BYTE 0x0000
#define SMB_PIPE_READMODE_MESSAGE 0x0100
#define SMB_PIPE_TYPE_BYTE 0x0000
#define SMB_PIPE_TYPE_MESSAGE 0x0400
#define SMB_PIPE_END_CLIENT 0x0000
#define SMB_PIPE_END_SERVER 0x4000
#define SMB_PIPE_WAIT 0x0000
#define SMB_PIPE_NOWAIT 0x8000
#define SMB_PIPE_UNLIMITED_INSTANCES 0x00FF
/*
* smb_com_seek request
*/
#define SMB_SEEK_SET 0 /* set file offset to specified offset */
/*
* API Numbers for Transact based RAP (Remote Administration Protocol) calls
*/
#define API_WshareEnum 0
#define API_WshareGetInfo 1
#define API_WshareSetInfo 2
#define API_WshareAdd 3
#define API_WshareDel 4
#define API_NetShareCheck 5
#define API_WsessionEnum 6
#define API_WsessionGetInfo 7
#define API_WsessionDel 8
#define API_WconnectionEnum 9
#define API_WfileEnum 10
#define API_WfileGetInfo 11
#define API_WfileClose 12
#define API_WserverGetInfo 13
#define API_WserverSetInfo 14
#define API_WserverDiskEnum 15
#define API_WserverAdminCommand 16
#define API_NetAuditOpen 17
#define API_WauditClear 18
#define API_NetErrorLogOpen 19
#define API_WerrorLogClear 20
#define API_NetCharDevEnum 21
#define API_NetCharDevGetInfo 22
#define API_WCharDevControl 23
#define API_NetCharDevQEnum 24
#define API_NetCharDevQGetInfo 25
#define API_WCharDevQSetInfo 26
#define API_WCharDevQPurge 27
#define API_WCharDevQPurgeSelf 28
#define API_WMessageNameEnum 29
#define API_WMessageNameGetInfo 30
#define API_WMessageNameAdd 31
#define API_WMessageNameDel 32
#define API_WMessageNameFwd 33
#define API_WMessageNameUnFwd 34
#define API_WMessageBufferSend 35
#define API_WMessageFileSend 36
#define API_WMessageLogFileSet 37
#define API_WMessageLogFileGet 38
#define API_WServiceEnum 39
#define API_WServiceInstall 40
#define API_WServiceControl 41
#define API_WAccessEnum 42
#define API_WAccessGetInfo 43
#define API_WAccessSetInfo 44
#define API_WAccessAdd 45
#define API_WAccessDel 46
#define API_WGroupEnum 47
#define API_WGroupAdd 48
#define API_WGroupDel 49
#define API_WGroupAddUser 50
#define API_WGroupDelUser 51
#define API_WGroupGetUsers 52
#define API_WUserEnum 53
#define API_WUserAdd 54
#define API_WUserDel 55
#define API_WUserGetInfo 56
#define API_WUserSetInfo 57
#define API_WUserPasswordSet 58
#define API_WUserGetGroups 59
#define API_DeadTableEntry 60
#define API_WWkstaSetUID 62
#define API_WWkstaGetInfo 63
#define API_WWkstaSetInfo 64
#define API_WUseEnum 65
#define API_WUseAdd 66
#define API_WUseDel 67
#define API_WUseGetInfo 68
#define API_WPrintQEnum 69
#define API_WPrintQGetInfo 70
#define API_WPrintQSetInfo 71
#define API_WPrintQAdd 72
#define API_WPrintQDel 73
#define API_WPrintQPause 74
#define API_WPrintQContinue 75
#define API_WPrintJobEnum 76
#define API_WPrintJobGetInfo 77
#define API_WPrintJobSetInfo_OLD 78
#define API_WPrintJobDel 81
#define API_WPrintJobPause 82
#define API_WPrintJobContinue 83
#define API_WPrintDestEnum 84
#define API_WPrintDestGetInfo 85
#define API_WPrintDestControl 86
#define API_WProfileSave 87
#define API_WProfileLoad 88
#define API_WStatisticsGet 89
#define API_WStatisticsClear 90
#define API_NetRemoteTOD 91
#define API_WNetBiosEnum 92
#define API_WNetBiosGetInfo 93
#define API_NetServerEnum 94
#define API_I_NetServerEnum 95
#define API_WServiceGetInfo 96
#define API_WPrintQPurge 103
#define API_NetServerEnum2 104
#define API_WAccessGetUserPerms 105
#define API_WGroupGetInfo 106
#define API_WGroupSetInfo 107
#define API_WGroupSetUsers 108
#define API_WUserSetGroups 109
#define API_WUserModalsGet 110
#define API_WUserModalsSet 111
#define API_WFileEnum2 112
#define API_WUserAdd2 113
#define API_WUserSetInfo2 114
#define API_WUserPasswordSet2 115
#define API_I_NetServerEnum2 116
#define API_WConfigGet2 117
#define API_WConfigGetAll2 118
#define API_WGetDCName 119
#define API_NetHandleGetInfo 120
#define API_NetHandleSetInfo 121
#define API_WStatisticsGet2 122
#define API_WBuildGetInfo 123
#define API_WFileGetInfo2 124
#define API_WFileClose2 125
#define API_WNetServerReqChallenge 126
#define API_WNetServerAuthenticate 127
#define API_WNetServerPasswordSet 128
#define API_WNetAccountDeltas 129
#define API_WNetAccountSync 130
#define API_WUserEnum2 131
#define API_WWkstaUserLogon 132
#define API_WWkstaUserLogoff 133
#define API_WLogonEnum 134
#define API_WErrorLogRead 135
#define API_WI_NetPathType 136
#define API_WI_NetPathCanonicalize 137
#define API_WI_NetPathCompare 138
#define API_WI_NetNameValidate 139
#define API_WI_NetNameCanonicalize 140
#define API_WI_NetNameCompare 141
#define API_WAuditRead 142
#define API_WPrintDestAdd 143
#define API_WPrintDestSetInfo 144
#define API_WPrintDestDel 145
#define API_WUserValidate2 146
#define API_WPrintJobSetInfo 147
#define API_TI_NetServerDiskEnum 148
#define API_TI_NetServerDiskGetInfo 149
#define API_TI_FTVerifyMirror 150
#define API_TI_FTAbortVerify 151
#define API_TI_FTGetInfo 152
#define API_TI_FTSetInfo 153
#define API_TI_FTLockDisk 154
#define API_TI_FTFixError 155
#define API_TI_FTAbortFix 156
#define API_TI_FTDiagnoseError 157
#define API_TI_FTGetDriveStats 158
#define API_TI_FTErrorGetInfo 160
#define API_NetAccessCheck 163
#define API_NetAlertRaise 164
#define API_NetAlertStart 165
#define API_NetAlertStop 166
#define API_NetAuditWrite 167
#define API_NetIRemoteAPI 168
#define API_NetServiceStatus 169
#define API_I_NetServerRegister 170
#define API_I_NetServerDeregister 171
#define API_I_NetSessionEntryMake 172
#define API_I_NetSessionEntryClear 173
#define API_I_NetSessionEntryGetInfo 174
#define API_I_NetSessionEntrySetInfo 175
#define API_I_NetConnectionEntryMake 176
#define API_I_NetConnectionEntryClear 177
#define API_I_NetConnectionEntrySetInfo 178
#define API_I_NetConnectionEntryGetInfo 179
#define API_I_NetFileEntryMake 180
#define API_I_NetFileEntryClear 181
#define API_I_NetFileEntrySetInfo 182
#define API_I_NetFileEntryGetInfo 183
#define API_AltSrvMessageBufferSend 184
#define API_AltSrvMessageFileSend 185
#define API_wI_NetRplWkstaEnum 186
#define API_wI_NetRplWkstaGetInfo 187
#define API_wI_NetRplWkstaSetInfo 188
#define API_wI_NetRplWkstaAdd 189
#define API_wI_NetRplWkstaDel 190
#define API_wI_NetRplProfileEnum 191
#define API_wI_NetRplProfileGetInfo 192
#define API_wI_NetRplProfileSetInfo 193
#define API_wI_NetRplProfileAdd 194
#define API_wI_NetRplProfileDel 195
#define API_wI_NetRplProfileClone 196
#define API_wI_NetRplBaseProfileEnum 197
#define API_WIServerSetInfo 201
#define API_WPrintDriverEnum 205
#define API_WPrintQProcessorEnum 206
#define API_WPrintPortEnum 207
#define API_WNetWriteUpdateLog 208
#define API_WNetAccountUpdate 209
#define API_WNetAccountConfirmUpdate 210
#define API_WConfigSet 211
#define API_WAccountsReplicate 212
#define API_SamOEMChgPasswordUser2_P 214
#define API_NetServerEnum3 215
#define API_WprintDriverGetInfo 250
#define API_WprintDriverSetInfo 251
#define API_WaliasAdd 252
#define API_WaliasDel 253
#define API_WaliasGetInfo 254
#define API_WaliasSetInfo 255
#define API_WaliasEnum 256
#define API_WuserGetLogonAsn 257
#define API_WuserSetLogonAsn 258
#define API_WuserGetAppSel 259
#define API_WuserSetAppSel 260
#define API_WappAdd 261
#define API_WappDel 262
#define API_WappGetInfo 263
#define API_WappSetInfo 264
#define API_WappEnum 265
#define API_WUserDCDBInit 266
#define API_WDASDAdd 267
#define API_WDASDDel 268
#define API_WDASDGetInfo 269
#define API_WDASDSetInfo 270
#define API_WDASDEnum 271
#define API_WDASDCheck 272
#define API_WDASDCtl 273
#define API_WuserRemoteLogonCheck 274
#define API_WUserPasswordSet3 275
#define API_WCreateRIPLMachine 276
#define API_WDeleteRIPLMachine 277
#define API_WGetRIPLMachineInfo 278
#define API_WSetRIPLMachineInfo 279
#define API_WEnumRIPLMachine 280
#define API_WI_ShareAdd 281
#define API_WI_AliasEnum 282
#define API_WaccessApply 283
#define API_WPrt16Query 284
#define API_WPrt16Set 285
#define API_WUserDel100 286
#define API_WUserRemoteLogonCheck2 287
#define API_WRemoteTODSet 294
#define API_WprintJobMoveAll 295
#define API_W16AppParmAdd 296
#define API_W16AppParmDel 297
#define API_W16AppParmGet 298
#define API_W16AppParmSet 299
#define API_W16RIPLMachineCreate 300
#define API_W16RIPLMachineGetInfo 301
#define API_W16RIPLMachineSetInfo 302
#define API_W16RIPLMachineEnum 303
#define API_W16RIPLMachineListParmEnum 304
#define API_W16RIPLMachClassGetInfo 305
#define API_W16RIPLMachClassEnum 306
#define API_W16RIPLMachClassCreate 307
#define API_W16RIPLMachClassSetInfo 308
#define API_W16RIPLMachClassDelete 309
#define API_W16RIPLMachClassLPEnum 310
#define API_W16RIPLMachineDelete 311
#define API_W16WSLevelGetInfo 312
#define API_WserverNameAdd 313
#define API_WserverNameDel 314
#define API_WserverNameEnum 315
#define API_I_WDASDEnum 316
#define API_I_WDASDEnumTerminate 317
#define API_I_WDASDSetInfo2 318
#define MAX_RAP_API 318
#ifdef __cplusplus
}
#endif
#endif /* _SMBSRV_SMB_H */