xgehal-device.c revision 7eced415e5dd557aef2d78483b5a7785f0e13670
a23fd118e437af0a7877dd313db8fdaa3537c675yl * CDDL HEADER START
a23fd118e437af0a7877dd313db8fdaa3537c675yl * The contents of this file are subject to the terms of the
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Common Development and Distribution License (the "License").
a23fd118e437af0a7877dd313db8fdaa3537c675yl * You may not use this file except in compliance with the License.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
a23fd118e437af0a7877dd313db8fdaa3537c675yl * See the License for the specific language governing permissions
a23fd118e437af0a7877dd313db8fdaa3537c675yl * and limitations under the License.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * When distributing Covered Code, include this CDDL HEADER in each
a23fd118e437af0a7877dd313db8fdaa3537c675yl * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * If applicable, add the following below this CDDL HEADER, with the
a23fd118e437af0a7877dd313db8fdaa3537c675yl * fields enclosed by brackets "[]" replaced with your own identifying
a23fd118e437af0a7877dd313db8fdaa3537c675yl * information: Portions Copyright [yyyy] [name of copyright owner]
a23fd118e437af0a7877dd313db8fdaa3537c675yl * CDDL HEADER END
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * Copyright (c) 2002-2006 Neterion, Inc.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Jenkins hash key length(in bytes)
a23fd118e437af0a7877dd313db8fdaa3537c675yl * mix(a,b,c) used in Jenkins hash algorithm
a23fd118e437af0a7877dd313db8fdaa3537c675yl#define mix(a,b,c) { \
a23fd118e437af0a7877dd313db8fdaa3537c675yl a -= b; a -= c; a ^= (c>>13); \
a23fd118e437af0a7877dd313db8fdaa3537c675yl b -= c; b -= a; b ^= (a<<8); \
a23fd118e437af0a7877dd313db8fdaa3537c675yl c -= a; c -= b; c ^= (b>>13); \
a23fd118e437af0a7877dd313db8fdaa3537c675yl a -= b; a -= c; a ^= (c>>12); \
a23fd118e437af0a7877dd313db8fdaa3537c675yl b -= c; b -= a; b ^= (a<<16); \
a23fd118e437af0a7877dd313db8fdaa3537c675yl c -= a; c -= b; c ^= (b>>5); \
a23fd118e437af0a7877dd313db8fdaa3537c675yl a -= b; a -= c; a ^= (c>>3); \
a23fd118e437af0a7877dd313db8fdaa3537c675yl b -= c; b -= a; b ^= (a<<10); \
a23fd118e437af0a7877dd313db8fdaa3537c675yl c -= a; c -= b; c ^= (b>>15); \
a23fd118e437af0a7877dd313db8fdaa3537c675yl * __hal_device_event_queued
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @data: pointer to xge_hal_device_t structure
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Will be called when new event succesfully queued.
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_assert(((xge_hal_device_t*)data)->magic == XGE_HAL_MAGIC);
a23fd118e437af0a7877dd313db8fdaa3537c675yl g_xge_hal_driver->uld_callbacks.event_queued(data, event_type);
a23fd118e437af0a7877dd313db8fdaa3537c675yl * __hal_pio_mem_write32_upper
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Endiann-aware implementation of xge_os_pio_mem_write32().
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Since Xframe has 64bit registers, we differintiate uppper and lower
a23fd118e437af0a7877dd313db8fdaa3537c675yl__hal_pio_mem_write32_upper(pci_dev_h pdev, pci_reg_h regh, u32 val, void *addr)
a23fd118e437af0a7877dd313db8fdaa3537c675yl#if defined(XGE_OS_HOST_BIG_ENDIAN) && !defined(XGE_OS_PIO_LITTLE_ENDIAN)
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_os_pio_mem_write32(pdev, regh, val, (void *)((char *)addr + 4));
a23fd118e437af0a7877dd313db8fdaa3537c675yl * __hal_pio_mem_write32_upper
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Endiann-aware implementation of xge_os_pio_mem_write32().
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Since Xframe has 64bit registers, we differintiate uppper and lower
a23fd118e437af0a7877dd313db8fdaa3537c675yl__hal_pio_mem_write32_lower(pci_dev_h pdev, pci_reg_h regh, u32 val,
a23fd118e437af0a7877dd313db8fdaa3537c675yl#if defined(XGE_OS_HOST_BIG_ENDIAN) && !defined(XGE_OS_PIO_LITTLE_ENDIAN)
a23fd118e437af0a7877dd313db8fdaa3537c675yl * __hal_device_register_poll
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: pointer to xge_hal_device_t structure
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @reg: register to poll for
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @op: 0 - bit reset, 1 - bit set
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @mask: mask for logical "and" condition based on %op
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @max_millis: maximum time to try to poll in milliseconds
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Will poll certain register for specified amount of time.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Will poll until masked bit is not cleared.
a23fd118e437af0a7877dd313db8fdaa3537c675yl__hal_device_register_poll(xge_hal_device_t *hldev, u64 *reg,
a23fd118e437af0a7877dd313db8fdaa3537c675yl int i = 0;
a23fd118e437af0a7877dd313db8fdaa3537c675yl val64 = xge_os_pio_mem_read64(hldev->pdev, hldev->regh0, reg);
8347601bcb0a439f6e50fc36b4039a73d08700e1yl } while (++i <= 9);
8347601bcb0a439f6e50fc36b4039a73d08700e1yl val64 = xge_os_pio_mem_read64(hldev->pdev, hldev->regh0, reg);
8347601bcb0a439f6e50fc36b4039a73d08700e1yl } while (++i < max_millis);
a23fd118e437af0a7877dd313db8fdaa3537c675yl * __hal_device_wait_quiescent
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: the device
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hw_status: hw_status in case of error
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Will wait until device is quiescent for some blocks.
a23fd118e437af0a7877dd313db8fdaa3537c675yl__hal_device_wait_quiescent(xge_hal_device_t *hldev, u64 *hw_status)
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_hal_pci_bar0_t *bar0 = (xge_hal_pci_bar0_t *)(void *)hldev->bar0;
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* poll and wait first */
a23fd118e437af0a7877dd313db8fdaa3537c675yl (void) __hal_device_register_poll(hldev, &bar0->adapter_status, 1,
a23fd118e437af0a7877dd313db8fdaa3537c675yl (void) __hal_device_register_poll(hldev, &bar0->adapter_status, 1,
a23fd118e437af0a7877dd313db8fdaa3537c675yl * xge_hal_device_is_slot_freeze
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * @devh: the device
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Returns non-zero if the slot is freezed.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * The determination is made based on the adapter_status
a23fd118e437af0a7877dd313db8fdaa3537c675yl * register which will never give all FFs, unless PCI read
a23fd118e437af0a7877dd313db8fdaa3537c675yl * cannot go through.
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_hal_pci_bar0_t *bar0 = (xge_hal_pci_bar0_t *)(void *)hldev->bar0;
8347601bcb0a439f6e50fc36b4039a73d08700e1yl return((adapter_status == XGE_HAL_ALL_FOXES) || (device_id == 0xffff));
a23fd118e437af0a7877dd313db8fdaa3537c675yl * __hal_device_led_actifity_fix
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: pointer to xge_hal_device_t structure
a23fd118e437af0a7877dd313db8fdaa3537c675yl * SXE-002: Configure link and activity LED to turn it off
a23fd118e437af0a7877dd313db8fdaa3537c675ylstatic void
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_hal_pci_bar0_t *bar0 = (xge_hal_pci_bar0_t *)(void *)hldev->bar0;
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_offsetof(xge_hal_pci_config_le_t, subsystem_id), &subid);
a23fd118e437af0a7877dd313db8fdaa3537c675yl * In the case of Herc, there is a new register named beacon control
a23fd118e437af0a7877dd313db8fdaa3537c675yl * is added which was not present in Xena.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Beacon control register in Herc is at the same offset as
a23fd118e437af0a7877dd313db8fdaa3537c675yl * gpio control register in Xena. It means they are one and same in
a23fd118e437af0a7877dd313db8fdaa3537c675yl * the case of Xena. Also, gpio control register offset in Herc and
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Xena is different.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * The current register map represents Herc(It means we have
a23fd118e437af0a7877dd313db8fdaa3537c675yl * both beacon and gpio control registers in register map).
a23fd118e437af0a7877dd313db8fdaa3537c675yl * WRT transition from Xena to Herc, all the code in Xena which was
a23fd118e437af0a7877dd313db8fdaa3537c675yl * using gpio control register for LED handling would have to
a23fd118e437af0a7877dd313db8fdaa3537c675yl * use beacon control register in Herc and the rest of the code
a23fd118e437af0a7877dd313db8fdaa3537c675yl * which uses gpio control in Xena would use the same register
a23fd118e437af0a7877dd313db8fdaa3537c675yl * in Herc.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * WRT LED handling(following code), In the case of Herc, beacon
a23fd118e437af0a7877dd313db8fdaa3537c675yl * control register has to be used. This is applicable for Xena also,
a23fd118e437af0a7877dd313db8fdaa3537c675yl * since it represents the gpio control register in Xena.
a23fd118e437af0a7877dd313db8fdaa3537c675yl/* Constants for Fixing the MacAddress problem seen mostly on
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Alpha machines.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * __hal_device_fix_mac
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Fix for all "FFs" MAC address problems observed on Alpha platforms.
a23fd118e437af0a7877dd313db8fdaa3537c675ylstatic void
a23fd118e437af0a7877dd313db8fdaa3537c675yl int i = 0;
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_hal_pci_bar0_t *bar0 = (xge_hal_pci_bar0_t *)(void *)hldev->bar0;
a23fd118e437af0a7877dd313db8fdaa3537c675yl * In the case of Herc, there is a new register named beacon control
a23fd118e437af0a7877dd313db8fdaa3537c675yl * is added which was not present in Xena.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Beacon control register in Herc is at the same offset as
a23fd118e437af0a7877dd313db8fdaa3537c675yl * gpio control register in Xena. It means they are one and same in
a23fd118e437af0a7877dd313db8fdaa3537c675yl * the case of Xena. Also, gpio control register offset in Herc and
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Xena is different.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * The current register map represents Herc(It means we have
a23fd118e437af0a7877dd313db8fdaa3537c675yl * both beacon and gpio control registers in register map).
a23fd118e437af0a7877dd313db8fdaa3537c675yl * WRT transition from Xena to Herc, all the code in Xena which was
a23fd118e437af0a7877dd313db8fdaa3537c675yl * using gpio control register for LED handling would have to
a23fd118e437af0a7877dd313db8fdaa3537c675yl * use beacon control register in Herc and the rest of the code
a23fd118e437af0a7877dd313db8fdaa3537c675yl * which uses gpio control in Xena would use the same register
a23fd118e437af0a7877dd313db8fdaa3537c675yl * in Herc.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * In the following code(xena_fix_mac), beacon control register has
a23fd118e437af0a7877dd313db8fdaa3537c675yl * to be used in the case of Xena, since it represents gpio control
a23fd118e437af0a7877dd313db8fdaa3537c675yl * register. In the case of Herc, there is no change required.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * xge_hal_device_bcast_enable
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Enable receiving broadcasts.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * The host must first write RMAC_CFG_KEY "key"
a23fd118e437af0a7877dd313db8fdaa3537c675yl * register, and then - MAC_CFG register.
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_hal_pci_bar0_t *bar0 = (xge_hal_pci_bar0_t *)(void *)hldev->bar0;
8347601bcb0a439f6e50fc36b4039a73d08700e1yl xge_debug_device(XGE_TRACE, "mac_cfg 0x"XGE_OS_LLXFMT": broadcast %s",
a23fd118e437af0a7877dd313db8fdaa3537c675yl (unsigned long long)val64,
a23fd118e437af0a7877dd313db8fdaa3537c675yl hldev->config.mac.rmac_bcast_en ? "enabled" : "disabled");
a23fd118e437af0a7877dd313db8fdaa3537c675yl * xge_hal_device_bcast_disable
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Disable receiving broadcasts.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * The host must first write RMAC_CFG_KEY "key"
a23fd118e437af0a7877dd313db8fdaa3537c675yl * register, and then - MAC_CFG register.
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_hal_pci_bar0_t *bar0 = (xge_hal_pci_bar0_t *)(void *)hldev->bar0;
8347601bcb0a439f6e50fc36b4039a73d08700e1yl xge_debug_device(XGE_TRACE, "mac_cfg 0x"XGE_OS_LLXFMT": broadcast %s",
a23fd118e437af0a7877dd313db8fdaa3537c675yl (unsigned long long)val64,
a23fd118e437af0a7877dd313db8fdaa3537c675yl hldev->config.mac.rmac_bcast_en ? "enabled" : "disabled");
a23fd118e437af0a7877dd313db8fdaa3537c675yl * __hal_device_shared_splits_configure
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * TxDMA will stop Read request if the number of read split had exceeded
a23fd118e437af0a7877dd313db8fdaa3537c675yl * the limit set by shared_splits
a23fd118e437af0a7877dd313db8fdaa3537c675ylstatic void
a23fd118e437af0a7877dd313db8fdaa3537c675yl__hal_device_shared_splits_configure(xge_hal_device_t *hldev)
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_hal_pci_bar0_t *bar0 = (xge_hal_pci_bar0_t *)(void *)hldev->bar0;
a23fd118e437af0a7877dd313db8fdaa3537c675yl XGE_HAL_PIC_CNTL_SHARED_SPLITS(hldev->config.shared_splits);
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_debug_device(XGE_TRACE, "%s", "shared splits configured");
a23fd118e437af0a7877dd313db8fdaa3537c675yl * __hal_device_rmac_padding_configure
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Configure RMAC frame padding. Depends on configuration, it
a23fd118e437af0a7877dd313db8fdaa3537c675yl * can be send to host or removed by MAC.
a23fd118e437af0a7877dd313db8fdaa3537c675ylstatic void
a23fd118e437af0a7877dd313db8fdaa3537c675yl__hal_device_rmac_padding_configure(xge_hal_device_t *hldev)
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_hal_pci_bar0_t *bar0 = (xge_hal_pci_bar0_t *)(void *)hldev->bar0;
a23fd118e437af0a7877dd313db8fdaa3537c675yl * If the RTH enable bit is not set, strip the FCS
8347601bcb0a439f6e50fc36b4039a73d08700e1yl (unsigned long long)val64);
a23fd118e437af0a7877dd313db8fdaa3537c675yl * __hal_device_pause_frames_configure
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Set Pause threshold.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Pause frame is generated if the amount of data outstanding
a23fd118e437af0a7877dd313db8fdaa3537c675yl * on any queue exceeded the ratio of
a23fd118e437af0a7877dd313db8fdaa3537c675yl * (mac_control.mc_pause_threshold_q0q3 or q4q7)/256
a23fd118e437af0a7877dd313db8fdaa3537c675ylstatic void
a23fd118e437af0a7877dd313db8fdaa3537c675yl__hal_device_pause_frames_configure(xge_hal_device_t *hldev)
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_hal_pci_bar0_t *bar0 = (xge_hal_pci_bar0_t *)(void *)hldev->bar0;
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Set the time value to be inserted in the pause frame generated
a23fd118e437af0a7877dd313db8fdaa3537c675yl * by Xframe */
a23fd118e437af0a7877dd313db8fdaa3537c675yl val64 |= XGE_HAL_RMAC_PAUSE_HG_PTIME(hldev->config.mac.rmac_pause_time);
a23fd118e437af0a7877dd313db8fdaa3537c675yl for (i = 0; i<4; i++) {
a23fd118e437af0a7877dd313db8fdaa3537c675yl for (i = 0; i<4; i++) {
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_debug_device(XGE_TRACE, "%s", "pause frames configured");
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Herc's clock rate doubled, unless the slot is 33MHz.
a23fd118e437af0a7877dd313db8fdaa3537c675ylunsigned int __hal_fix_time_ival_herc(xge_hal_device_t *hldev,
a23fd118e437af0a7877dd313db8fdaa3537c675yl unsigned int time_ival)
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_assert(xge_hal_device_check_id(hldev) == XGE_HAL_CARD_HERC);
a23fd118e437af0a7877dd313db8fdaa3537c675yl if (hldev->bus_frequency != XGE_HAL_PCI_BUS_FREQUENCY_UNKNOWN &&
a23fd118e437af0a7877dd313db8fdaa3537c675yl * __hal_device_bus_master_disable
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Disable bus mastership.
a23fd118e437af0a7877dd313db8fdaa3537c675ylstatic void
a23fd118e437af0a7877dd313db8fdaa3537c675yl * __hal_device_bus_master_enable
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Disable bus mastership.
a23fd118e437af0a7877dd313db8fdaa3537c675ylstatic void
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* already enabled? do nothing */
a23fd118e437af0a7877dd313db8fdaa3537c675yl * __hal_device_intr_mgmt
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @mask: mask indicating which Intr block must be modified.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @flag: if true - enable, otherwise - disable interrupts.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Disable or enable device interrupts. Mask is used to specify
a23fd118e437af0a7877dd313db8fdaa3537c675yl * which hardware blocks should produce interrupts. For details
a23fd118e437af0a7877dd313db8fdaa3537c675yl * please refer to Xframe User Guide.
a23fd118e437af0a7877dd313db8fdaa3537c675ylstatic void
a23fd118e437af0a7877dd313db8fdaa3537c675yl__hal_device_intr_mgmt(xge_hal_device_t *hldev, u64 mask, int flag)
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_hal_pci_bar0_t *bar0 = (xge_hal_pci_bar0_t *)(void *)hldev->bar0;
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Top level interrupt classification */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* PIC Interrupts */
a23fd118e437af0a7877dd313db8fdaa3537c675yl if ((mask & (XGE_HAL_TX_PIC_INTR/* | XGE_HAL_RX_PIC_INTR*/))) {
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Enable PIC Intrs in the general intr mask register */
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Unmask only Link Up interrupt
a23fd118e437af0a7877dd313db8fdaa3537c675yl (unsigned long long)temp64);
a23fd118e437af0a7877dd313db8fdaa3537c675yl } else { /* flag == 0 */
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Mask both Link Up and Down interrupts
a23fd118e437af0a7877dd313db8fdaa3537c675yl (unsigned long long)temp64);
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Disable PIC Intrs in the general intr mask
a23fd118e437af0a7877dd313db8fdaa3537c675yl * register */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* DMA Interrupts */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Enabling/Disabling Tx DMA interrupts */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Enable TxDMA Intrs in the general intr mask register */
7eced415e5dd557aef2d78483b5a7785f0e13670xw /* Enable all TxDMA interrupts */
a23fd118e437af0a7877dd313db8fdaa3537c675yl } else { /* flag == 0 */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Disable TxDMA Intrs in the general intr mask
a23fd118e437af0a7877dd313db8fdaa3537c675yl * register */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Enabling/Disabling Rx DMA interrupts */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Enable RxDMA Intrs in the general intr mask register */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* All RxDMA block interrupts are disabled for now
a23fd118e437af0a7877dd313db8fdaa3537c675yl } else { /* flag == 0 */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Disable RxDMA Intrs in the general intr mask
a23fd118e437af0a7877dd313db8fdaa3537c675yl * register */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* MAC Interrupts */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Enabling/Disabling MAC interrupts */
a23fd118e437af0a7877dd313db8fdaa3537c675yl if (mask & (XGE_HAL_TX_MAC_INTR | XGE_HAL_RX_MAC_INTR)) {
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* All MAC block error inter. are disabled for now. */
a23fd118e437af0a7877dd313db8fdaa3537c675yl } else { /* flag == 0 */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Disable MAC Intrs in the general intr mask
a23fd118e437af0a7877dd313db8fdaa3537c675yl * register */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* XGXS Interrupts */
a23fd118e437af0a7877dd313db8fdaa3537c675yl if (mask & (XGE_HAL_TX_XGXS_INTR | XGE_HAL_RX_XGXS_INTR)) {
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* All XGXS block error interrupts are disabled for now
a23fd118e437af0a7877dd313db8fdaa3537c675yl } else { /* flag == 0 */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Disable MC Intrs in the general intr mask register */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Memory Controller(MC) interrupts */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Enable all MC blocks error interrupts */
a23fd118e437af0a7877dd313db8fdaa3537c675yl } else { /* flag == 0 */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Disable MC Intrs in the general intr mask
a23fd118e437af0a7877dd313db8fdaa3537c675yl * register */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Tx traffic interrupts */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Enable all the Tx side interrupts */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* '0' Enables all 64 TX interrupt levels. */
a23fd118e437af0a7877dd313db8fdaa3537c675yl } else { /* flag == 0 */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Disable Tx Traffic Intrs in the general intr mask
a23fd118e437af0a7877dd313db8fdaa3537c675yl * register. */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Rx traffic interrupts */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* '0' Enables all 8 RX interrupt levels. */
a23fd118e437af0a7877dd313db8fdaa3537c675yl } else { /* flag == 0 */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Disable Rx Traffic Intrs in the general intr mask
a23fd118e437af0a7877dd313db8fdaa3537c675yl * register.
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Sched Timer interrupt */
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * __hal_device_bimodal_configure
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * @hldev: HAL device handle.
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * Bimodal parameters initialization.
8347601bcb0a439f6e50fc36b4039a73d08700e1ylstatic void
8347601bcb0a439f6e50fc36b4039a73d08700e1yl for (i=0; i<XGE_HAL_MAX_RING_NUM; i++) {
8347601bcb0a439f6e50fc36b4039a73d08700e1yl rti->ufc_d = 4; /* <= 99% of a bandwidth traffic counts here */
8347601bcb0a439f6e50fc36b4039a73d08700e1yl rti->timer_val_us = 5; /* for optimal bus efficiency usage */
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * __hal_device_tti_apply
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * @hldev: HAL device handle.
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * apply TTI configuration.
8347601bcb0a439f6e50fc36b4039a73d08700e1yl__hal_device_tti_apply(xge_hal_device_t *hldev, xge_hal_tti_config_t *tti,
8347601bcb0a439f6e50fc36b4039a73d08700e1yl unsigned int tx_interval;
8347601bcb0a439f6e50fc36b4039a73d08700e1yl data1 |= XGE_HAL_TTI_DATA1_MEM_TX_TIMER_VAL(tx_interval);
8347601bcb0a439f6e50fc36b4039a73d08700e1yl xge_debug_device(XGE_TRACE, "TTI[%d] timer enabled to %d, ci %s",
8347601bcb0a439f6e50fc36b4039a73d08700e1yl data1 |= XGE_HAL_TTI_DATA1_MEM_TX_URNG_A(tti->urange_a) |
8347601bcb0a439f6e50fc36b4039a73d08700e1yl val64 = XGE_HAL_TTI_CMD_MEM_WE | XGE_HAL_TTI_CMD_MEM_STROBE_NEW_CMD |
8347601bcb0a439f6e50fc36b4039a73d08700e1yl if (!runtime && __hal_device_register_poll(hldev, &bar0->tti_command_mem,
8347601bcb0a439f6e50fc36b4039a73d08700e1yl /* upper layer may require to repeat */
8347601bcb0a439f6e50fc36b4039a73d08700e1yl xge_debug_device(XGE_TRACE, "TTI[%d] configured: tti_data1_mem 0x"
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * __hal_device_tti_configure
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * @hldev: HAL device handle.
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * TTI Initialization.
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * Initialize Transmit Traffic Interrupt Scheme.
8347601bcb0a439f6e50fc36b4039a73d08700e1yl__hal_device_tti_configure(xge_hal_device_t *hldev, int runtime)
8347601bcb0a439f6e50fc36b4039a73d08700e1yl for (i=0; i<XGE_HAL_MAX_FIFO_NUM; i++) {
8347601bcb0a439f6e50fc36b4039a73d08700e1yl for (j=0; j<XGE_HAL_MAX_FIFO_TTI_NUM; j++) {
8347601bcb0a439f6e50fc36b4039a73d08700e1yl /* at least some TTI enabled. Record it. */
8347601bcb0a439f6e50fc36b4039a73d08700e1yl /* processing bimodal TTIs */
8347601bcb0a439f6e50fc36b4039a73d08700e1yl for (i=0; i<XGE_HAL_MAX_RING_NUM; i++) {
8347601bcb0a439f6e50fc36b4039a73d08700e1yl /* at least some bimodal TTI enabled. Record it. */
8347601bcb0a439f6e50fc36b4039a73d08700e1yl status = __hal_device_tti_apply(hldev, &hldev->bimodal_tti[i],
a23fd118e437af0a7877dd313db8fdaa3537c675yl * __hal_device_rti_configure
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * RTI Initialization.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Initialize Receive Traffic Interrupt Scheme.
a23fd118e437af0a7877dd313db8fdaa3537c675yl__hal_device_rti_configure(xge_hal_device_t *hldev, int runtime)
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * we don't want to re-configure RTI in case when
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * bimodal interrupts are in use. Instead reconfigure TTI
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * with new RTI values.
a23fd118e437af0a7877dd313db8fdaa3537c675yl for (i=0; i<XGE_HAL_MAX_RING_NUM; i++) {
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_hal_rti_config_t *rti = &hldev->config.ring.queue[i].rti;
a23fd118e437af0a7877dd313db8fdaa3537c675yl unsigned int rx_interval;
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* upper layer may require to repeat */
a23fd118e437af0a7877dd313db8fdaa3537c675yl/* Constants to be programmed into the Xena's registers to configure
a23fd118e437af0a7877dd313db8fdaa3537c675yl * the XAUI. */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Reset PMA PLL */
a23fd118e437af0a7877dd313db8fdaa3537c675yl 0xC0010100008000E4ULL,
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Remove Reset from PMA PLL */
a23fd118e437af0a7877dd313db8fdaa3537c675yl 0xC0010100000000E4ULL,
a23fd118e437af0a7877dd313db8fdaa3537c675yl 0x80020515F21000E4ULL,
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Set PADLOOPBACKN */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Remove PADLOOPBACKN */
a23fd118e437af0a7877dd313db8fdaa3537c675ylstatic u64 default_herc_dtx_cfg[] = {
a23fd118e437af0a7877dd313db8fdaa3537c675yl 0x80000515BA750000ULL, 0x80000515BA7500E0ULL,
a23fd118e437af0a7877dd313db8fdaa3537c675yl 0x80000515BA750004ULL, 0x80000515BA7500E4ULL,
a23fd118e437af0a7877dd313db8fdaa3537c675yl 0x80010515003F0000ULL, 0x80010515003F00E0ULL,
a23fd118e437af0a7877dd313db8fdaa3537c675yl 0x80010515003F0004ULL, 0x80010515003F00E4ULL,
a23fd118e437af0a7877dd313db8fdaa3537c675yl 0x80020515F2100000ULL, 0x80020515F21000E0ULL,
a23fd118e437af0a7877dd313db8fdaa3537c675yl 0x80020515F2100004ULL, 0x80020515F21000E4ULL,
7eced415e5dd557aef2d78483b5a7785f0e13670xw__hal_serial_mem_write64(xge_hal_device_t *hldev, u64 value, u64 *reg)
7eced415e5dd557aef2d78483b5a7785f0e13670xw__hal_serial_mem_read64(xge_hal_device_t *hldev, u64 *reg)
7eced415e5dd557aef2d78483b5a7785f0e13670xw u64 val64 = xge_os_pio_mem_read64(hldev->pdev, hldev->regh0,
a23fd118e437af0a7877dd313db8fdaa3537c675yl * __hal_device_xaui_configure
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Configure XAUI Interface of Xena.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * To Configure the Xena's XAUI, one has to write a series
a23fd118e437af0a7877dd313db8fdaa3537c675yl * of 64 bit values into two registers in a particular
a23fd118e437af0a7877dd313db8fdaa3537c675yl * sequence. Hence a macro 'SWITCH_SIGN' has been defined
a23fd118e437af0a7877dd313db8fdaa3537c675yl * which will be defined in the array of configuration values
a23fd118e437af0a7877dd313db8fdaa3537c675yl * (default_dtx_cfg & default_mdio_cfg) at appropriate places
a23fd118e437af0a7877dd313db8fdaa3537c675yl * to switch writing from one regsiter to another. We continue
a23fd118e437af0a7877dd313db8fdaa3537c675yl * writing these values until we encounter the 'END_SIGN' macro.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * For example, After making a series of 21 writes into
a23fd118e437af0a7877dd313db8fdaa3537c675yl * dtx_control register the 'SWITCH_SIGN' appears and hence we
a23fd118e437af0a7877dd313db8fdaa3537c675yl * start writing into mdio_control until we encounter END_SIGN.
a23fd118e437af0a7877dd313db8fdaa3537c675ylstatic void
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_hal_pci_bar0_t *bar0 = (xge_hal_pci_bar0_t *)(void *)hldev->bar0;
a23fd118e437af0a7877dd313db8fdaa3537c675yl if (xge_hal_device_check_id(hldev) == XGE_HAL_CARD_XENA) {
a23fd118e437af0a7877dd313db8fdaa3537c675yl } else if (xge_hal_device_check_id(hldev) == XGE_HAL_CARD_HERC) {
7eced415e5dd557aef2d78483b5a7785f0e13670xw __hal_serial_mem_write64(hldev, default_dtx_cfg[dtx_cnt],
7eced415e5dd557aef2d78483b5a7785f0e13670xw __hal_serial_mem_write64(hldev, default_mdio_cfg[mdio_cnt],
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_debug_device(XGE_TRACE, "%s", "XAUI interface configured");
a23fd118e437af0a7877dd313db8fdaa3537c675yl * __hal_device_mac_link_util_set
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Set sampling rate to calculate link utilization.
a23fd118e437af0a7877dd313db8fdaa3537c675ylstatic void
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_hal_pci_bar0_t *bar0 = (xge_hal_pci_bar0_t *)(void *)hldev->bar0;
a23fd118e437af0a7877dd313db8fdaa3537c675yl "bandwidth link utilization configured");
a23fd118e437af0a7877dd313db8fdaa3537c675yl * __hal_device_set_swapper
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Set the Xframe's byte "swapper" in accordance with
a23fd118e437af0a7877dd313db8fdaa3537c675yl * endianness of the host.
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_hal_pci_bar0_t *bar0 = (xge_hal_pci_bar0_t *)(void *)hldev->bar0;
a23fd118e437af0a7877dd313db8fdaa3537c675yl * from 32bit errarta:
a23fd118e437af0a7877dd313db8fdaa3537c675yl * The SWAPPER_CONTROL register determines how the adapter accesses
a23fd118e437af0a7877dd313db8fdaa3537c675yl * host memory as well as how it responds to read and write requests
a23fd118e437af0a7877dd313db8fdaa3537c675yl * from the host system. Writes to this register should be performed
a23fd118e437af0a7877dd313db8fdaa3537c675yl * carefully, since the byte swappers could reverse the order of bytes.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * When configuring this register keep in mind that writes to the PIF
a23fd118e437af0a7877dd313db8fdaa3537c675yl * read and write swappers could reverse the order of the upper and
a23fd118e437af0a7877dd313db8fdaa3537c675yl * lower 32-bit words. This means that the driver may have to write
a23fd118e437af0a7877dd313db8fdaa3537c675yl * to the upper 32 bits of the SWAPPER_CONTROL twice in order to
a23fd118e437af0a7877dd313db8fdaa3537c675yl * configure the entire register. */
a23fd118e437af0a7877dd313db8fdaa3537c675yl * The device by default set to a big endian format, so a big endian
a23fd118e437af0a7877dd313db8fdaa3537c675yl * driver need not set anything.
8347601bcb0a439f6e50fc36b4039a73d08700e1yl xge_debug_device(XGE_TRACE, "using custom HW swapper 0x"XGE_OS_LLXFMT,
a23fd118e437af0a7877dd313db8fdaa3537c675yl (unsigned long long)val64);
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Initially we enable all bits to make it accessible by the driver,
a23fd118e437af0a7877dd313db8fdaa3537c675yl * then we selectively enable only those bits that we want to set.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * i.e. force swapper to swap for the first time since second write
a23fd118e437af0a7877dd313db8fdaa3537c675yl * will overwrite with the final settings.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Use only for little endian platforms.
a23fd118e437af0a7877dd313db8fdaa3537c675yl XGE_HAL_SWAPPER_CTRL_STATS_FE | XGE_HAL_SWAPPER_CTRL_STATS_SE);
a23fd118e437af0a7877dd313db8fdaa3537c675yl if (hldev->config.intr_mode == XGE_HAL_INTR_MODE_MSIX) {
a23fd118e437af0a7877dd313db8fdaa3537c675yl val64 |= XGE_HAL_SWAPPER_CTRL_XMSI_SE;
a23fd118e437af0a7877dd313db8fdaa3537c675yl __hal_pio_mem_write32_lower(hldev->pdev, hldev->regh0, (u32)val64,
a23fd118e437af0a7877dd313db8fdaa3537c675yl __hal_pio_mem_write32_upper(hldev->pdev, hldev->regh0, (u32)(val64>>32),
a23fd118e437af0a7877dd313db8fdaa3537c675yl __hal_pio_mem_write32_upper(hldev->pdev, hldev->regh0, (u32)(val64>>32),
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_debug_device(XGE_TRACE, "%s", "using little endian set");
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Verifying if endian settings are accurate by reading a feedback
a23fd118e437af0a7877dd313db8fdaa3537c675yl * register. */
8347601bcb0a439f6e50fc36b4039a73d08700e1yl xge_debug_device(XGE_ERR, "pif_rd_swapper_fb read "XGE_OS_LLXFMT,
a23fd118e437af0a7877dd313db8fdaa3537c675yl (unsigned long long) val64);
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_debug_device(XGE_TRACE, "%s", "be/le swapper enabled");
a23fd118e437af0a7877dd313db8fdaa3537c675yl * __hal_device_rts_mac_configure - Configure RTS steering based on
a23fd118e437af0a7877dd313db8fdaa3537c675yl * destination mac address.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_hal_pci_bar0_t *bar0 = (xge_hal_pci_bar0_t *)(void *)hldev->bar0;
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Set the receive traffic steering mode from default(classic)
a23fd118e437af0a7877dd313db8fdaa3537c675yl * to enhanced.
7eced415e5dd557aef2d78483b5a7785f0e13670xw * __hal_device_rts_port_configure - Configure RTS steering based on
7eced415e5dd557aef2d78483b5a7785f0e13670xw * destination or source port number.
7eced415e5dd557aef2d78483b5a7785f0e13670xw * @hldev: HAL device handle.
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_hal_pci_bar0_t *bar0 = (xge_hal_pci_bar0_t *)(void *)hldev->bar0;
7eced415e5dd557aef2d78483b5a7785f0e13670xw * Set the receive traffic steering mode from default(classic)
7eced415e5dd557aef2d78483b5a7785f0e13670xw * to enhanced.
7eced415e5dd557aef2d78483b5a7785f0e13670xw * Initiate port steering according to per-ring configuration
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_hal_ring_queue_t *queue = &hldev->config.ring.queue[rnum];
7eced415e5dd557aef2d78483b5a7785f0e13670xw for (pnum = 0; pnum < XGE_HAL_MAX_STEERABLE_PORTS; pnum++) {
7eced415e5dd557aef2d78483b5a7785f0e13670xw * Skip and clear empty ports
7eced415e5dd557aef2d78483b5a7785f0e13670xw * Clear CAM memory
7eced415e5dd557aef2d78483b5a7785f0e13670xw * Assign new Port values according
7eced415e5dd557aef2d78483b5a7785f0e13670xw * to configuration
7eced415e5dd557aef2d78483b5a7785f0e13670xw /* poll until done */
7eced415e5dd557aef2d78483b5a7785f0e13670xw /* upper layer may require to repeat */
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * __hal_device_rts_qos_configure - Configure RTS steering based on
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * @hldev: HAL device handle.
8347601bcb0a439f6e50fc36b4039a73d08700e1yl xge_hal_pci_bar0_t *bar0 = (xge_hal_pci_bar0_t *)(void *)hldev->bar0;
7eced415e5dd557aef2d78483b5a7785f0e13670xw /* First clear the RTS_DS_MEM_DATA */
7eced415e5dd557aef2d78483b5a7785f0e13670xw for (j = 0; j < 64; j++ )
7eced415e5dd557aef2d78483b5a7785f0e13670xw /* First clear the value */
8347601bcb0a439f6e50fc36b4039a73d08700e1yl /* poll until done */
8347601bcb0a439f6e50fc36b4039a73d08700e1yl /* upper layer may require to repeat */
7eced415e5dd557aef2d78483b5a7785f0e13670xw for (j = 0; j < XGE_HAL_MAX_RING_NUM; j++) {
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_os_pio_mem_write64(hldev->pdev, hldev->regh0, val64, &bar0->rx_w_round_robin_0);
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_os_pio_mem_write64(hldev->pdev, hldev->regh0, val64, &bar0->rx_w_round_robin_1);
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_os_pio_mem_write64(hldev->pdev, hldev->regh0, val64, &bar0->rx_w_round_robin_2);
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_os_pio_mem_write64(hldev->pdev, hldev->regh0, val64, &bar0->rx_w_round_robin_3);
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_os_pio_mem_write64(hldev->pdev, hldev->regh0, val64, &bar0->rx_w_round_robin_4);
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_os_pio_mem_write64(hldev->pdev, hldev->regh0, val64, &bar0->rx_w_round_robin_0);
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_os_pio_mem_write64(hldev->pdev, hldev->regh0, val64, &bar0->rx_w_round_robin_1);
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_os_pio_mem_write64(hldev->pdev, hldev->regh0, val64, &bar0->rx_w_round_robin_2);
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_os_pio_mem_write64(hldev->pdev, hldev->regh0, val64, &bar0->rx_w_round_robin_3);
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_os_pio_mem_write64(hldev->pdev, hldev->regh0, val64, &bar0->rx_w_round_robin_4);
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_os_pio_mem_write64(hldev->pdev, hldev->regh0, val64, &bar0->rx_w_round_robin_0);
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_os_pio_mem_write64(hldev->pdev, hldev->regh0, val64, &bar0->rx_w_round_robin_1);
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_os_pio_mem_write64(hldev->pdev, hldev->regh0, val64, &bar0->rx_w_round_robin_2);
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_os_pio_mem_write64(hldev->pdev, hldev->regh0, val64, &bar0->rx_w_round_robin_3);
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_os_pio_mem_write64(hldev->pdev, hldev->regh0, val64, &bar0->rx_w_round_robin_4);
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_os_pio_mem_write64(hldev->pdev, hldev->regh0, val64, &bar0->rx_w_round_robin_0);
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_os_pio_mem_write64(hldev->pdev, hldev->regh0, val64, &bar0->rx_w_round_robin_1);
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_os_pio_mem_write64(hldev->pdev, hldev->regh0, val64, &bar0->rx_w_round_robin_2);
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_os_pio_mem_write64(hldev->pdev, hldev->regh0, val64, &bar0->rx_w_round_robin_3);
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_os_pio_mem_write64(hldev->pdev, hldev->regh0, val64, &bar0->rx_w_round_robin_4);
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_os_pio_mem_write64(hldev->pdev, hldev->regh0, val64, &bar0->rx_w_round_robin_0);
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_os_pio_mem_write64(hldev->pdev, hldev->regh0, val64, &bar0->rx_w_round_robin_1);
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_os_pio_mem_write64(hldev->pdev, hldev->regh0, val64, &bar0->rx_w_round_robin_2);
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_os_pio_mem_write64(hldev->pdev, hldev->regh0, val64, &bar0->rx_w_round_robin_3);
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_os_pio_mem_write64(hldev->pdev, hldev->regh0, val64, &bar0->rx_w_round_robin_4);
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_os_pio_mem_write64(hldev->pdev, hldev->regh0, val64, &bar0->rx_w_round_robin_0);
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_os_pio_mem_write64(hldev->pdev, hldev->regh0, val64, &bar0->rx_w_round_robin_1);
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_os_pio_mem_write64(hldev->pdev, hldev->regh0, val64, &bar0->rx_w_round_robin_2);
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_os_pio_mem_write64(hldev->pdev, hldev->regh0, val64, &bar0->rx_w_round_robin_3);
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_os_pio_mem_write64(hldev->pdev, hldev->regh0, val64, &bar0->rx_w_round_robin_4);
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_os_pio_mem_write64(hldev->pdev, hldev->regh0, val64, &bar0->rx_w_round_robin_0);
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_os_pio_mem_write64(hldev->pdev, hldev->regh0, val64, &bar0->rx_w_round_robin_1);
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_os_pio_mem_write64(hldev->pdev, hldev->regh0, val64, &bar0->rx_w_round_robin_2);
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_os_pio_mem_write64(hldev->pdev, hldev->regh0, val64, &bar0->rx_w_round_robin_3);
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_os_pio_mem_write64(hldev->pdev, hldev->regh0, val64, &bar0->rx_w_round_robin_4);
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_os_pio_mem_write64(hldev->pdev, hldev->regh0, val64, &bar0->rx_w_round_robin_0);
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_os_pio_mem_write64(hldev->pdev, hldev->regh0, val64, &bar0->rx_w_round_robin_1);
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_os_pio_mem_write64(hldev->pdev, hldev->regh0, val64, &bar0->rx_w_round_robin_2);
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_os_pio_mem_write64(hldev->pdev, hldev->regh0, val64, &bar0->rx_w_round_robin_3);
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_os_pio_mem_write64(hldev->pdev, hldev->regh0, val64, &bar0->rx_w_round_robin_4);
a23fd118e437af0a7877dd313db8fdaa3537c675yl * xge__hal_device_rts_mac_enable
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @devh: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @index: index number where the MAC addr will be stored
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @macaddr: MAC address
a23fd118e437af0a7877dd313db8fdaa3537c675yl * - Enable RTS steering for the given MAC address. This function has to be
a23fd118e437af0a7877dd313db8fdaa3537c675yl * called with lock acquired.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * 1. ULD has to call this function with the index value which
a23fd118e437af0a7877dd313db8fdaa3537c675yl * statisfies the following condition:
a23fd118e437af0a7877dd313db8fdaa3537c675yl * ring_num = (index % 8)
a23fd118e437af0a7877dd313db8fdaa3537c675yl * 2.ULD also needs to make sure that the index is not
a23fd118e437af0a7877dd313db8fdaa3537c675yl * occupied by any MAC address. If that index has any MAC address
a23fd118e437af0a7877dd313db8fdaa3537c675yl * it will be overwritten and HAL will not check for it.
a23fd118e437af0a7877dd313db8fdaa3537c675ylxge_hal_device_rts_mac_enable(xge_hal_device_h devh, int index, macaddr_t macaddr)
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Set the MAC address at the given location marked by index.
a23fd118e437af0a7877dd313db8fdaa3537c675yl status = xge_hal_device_macaddr_set(hldev, index, macaddr);
a23fd118e437af0a7877dd313db8fdaa3537c675yl "Not able to set the mac addr");
a23fd118e437af0a7877dd313db8fdaa3537c675yl * xge__hal_device_rts_mac_disable
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @index: index number where to disable the MAC addr
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Disable RTS Steering based on the MAC address.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * This function should be called with lock acquired.
a23fd118e437af0a7877dd313db8fdaa3537c675ylxge_hal_device_rts_mac_disable(xge_hal_device_h devh, int index)
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_debug_ll(XGE_TRACE, "the index value is %d ", index);
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Disable MAC address @ given index location
a23fd118e437af0a7877dd313db8fdaa3537c675yl status = xge_hal_device_macaddr_set(hldev, index, macaddr);
a23fd118e437af0a7877dd313db8fdaa3537c675yl "Not able to set the mac addr");
a23fd118e437af0a7877dd313db8fdaa3537c675yl * __hal_device_rth_configure - Configure RTH for the device
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Using IT (Indirection Table).
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_hal_pci_bar0_t *bar0 = (xge_hal_pci_bar0_t *)(void *)hldev->bar0;
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Set the receive traffic steering mode from default(classic)
a23fd118e437af0a7877dd313db8fdaa3537c675yl * to enhanced.
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* for starters: fill in all the buckets with rings "equally" */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* write data */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* execute */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* poll until done */
a23fd118e437af0a7877dd313db8fdaa3537c675yl val64 |= XGE_HAL_RTS_RTH_BUCKET_SIZE(hldev->config.rth_bucket_size);
7eced415e5dd557aef2d78483b5a7785f0e13670xw val64 |= XGE_HAL_RTS_RTH_TCP_IPV4_EN | XGE_HAL_RTS_RTH_UDP_IPV4_EN | XGE_HAL_RTS_RTH_IPV4_EN |
a23fd118e437af0a7877dd313db8fdaa3537c675yl XGE_HAL_RTS_RTH_TCP_IPV6_EN |XGE_HAL_RTS_RTH_UDP_IPV6_EN | XGE_HAL_RTS_RTH_IPV6_EN |
a23fd118e437af0a7877dd313db8fdaa3537c675yl XGE_HAL_RTS_RTH_TCP_IPV6_EX_EN | XGE_HAL_RTS_RTH_UDP_IPV6_EX_EN | XGE_HAL_RTS_RTH_IPV6_EX_EN;
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_debug_device(XGE_TRACE, "RTH configured, bucket_size %d",
a23fd118e437af0a7877dd313db8fdaa3537c675yl * __hal_spdm_entry_add - Add a new entry to the SPDM table.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Add a new entry to the SPDM table
a23fd118e437af0a7877dd313db8fdaa3537c675yl * This function add a new entry to the SPDM table.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * This function should be called with spdm_lock.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * See also: xge_hal_spdm_entry_add , xge_hal_spdm_entry_remove.
a23fd118e437af0a7877dd313db8fdaa3537c675yl__hal_spdm_entry_add(xge_hal_device_t *hldev, xge_hal_ipaddr_t *src_ip,
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_hal_ipaddr_t *dst_ip, u16 l4_sp, u16 l4_dp, u8 is_tcp,
a23fd118e437af0a7877dd313db8fdaa3537c675yl u8 is_ipv4, u8 tgt_queue, u32 jhash_value, u16 spdm_entry)
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_hal_pci_bar0_t *bar0 = (xge_hal_pci_bar0_t *)(void *)hldev->bar0;
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Clear the SPDM READY bit
7eced415e5dd557aef2d78483b5a7785f0e13670xw "L4 SP %x:DP %x: hash %x tgt_queue %d ",
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Construct the SPDM entry.
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_os_memcpy(&spdm_line_arr[1], &src_ip->ipv6.addr[0], 8);
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_os_memcpy(&spdm_line_arr[2], &src_ip->ipv6.addr[1], 8);
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_os_memcpy(&spdm_line_arr[3], &dst_ip->ipv6.addr[0], 8);
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_os_memcpy(&spdm_line_arr[4], &dst_ip->ipv6.addr[1], 8);
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Add the entry to the SPDM table
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Wait for the operation to be completed.
a23fd118e437af0a7877dd313db8fdaa3537c675yl if (__hal_device_register_poll(hldev, &bar0->rxpic_int_reg, 1,
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Add this information to a local SPDM table. The purpose of
a23fd118e437af0a7877dd313db8fdaa3537c675yl * maintaining a local SPDM table is to avoid a search in the
a23fd118e437af0a7877dd313db8fdaa3537c675yl * adapter SPDM table for spdm entry lookup which is very costly
a23fd118e437af0a7877dd313db8fdaa3537c675yl * in terms of time.
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_os_memcpy(&hldev->spdm_table[spdm_entry]->src_ip, src_ip,
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_os_memcpy(&hldev->spdm_table[spdm_entry]->dst_ip, dst_ip,
a23fd118e437af0a7877dd313db8fdaa3537c675yl hldev->spdm_table[spdm_entry]->jhash_value = jhash_value;
a23fd118e437af0a7877dd313db8fdaa3537c675yl * __hal_device_rth_spdm_configure - Configure RTH for the device
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Using SPDM (Socket-Pair Direct Match).
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_hal_pci_bar0_t *bar0 = (xge_hal_pci_bar0_t *)hldev->bar0;
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Retrieve the base address of SPDM Table.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * spdm_bar_num specifies the PCI bar num register used to
a23fd118e437af0a7877dd313db8fdaa3537c675yl * address the memory space. spdm_bar_offset specifies the offset
a23fd118e437af0a7877dd313db8fdaa3537c675yl * of the SPDM memory with in the bar num memory space.
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_assert(((spdm_bar_num != 0) && (spdm_bar_num != 1)));
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Retrieve the size of SPDM table(number of entries).
a23fd118e437af0a7877dd313db8fdaa3537c675yl hldev->spdm_max_entries = XGE_HAL_SPDM_MAX_ENTRIES(val64);
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Allocate memory to hold the copy of SPDM table.
a23fd118e437af0a7877dd313db8fdaa3537c675yl if ((mem = xge_os_malloc(hldev->pdev, spdm_table_size)) == NULL)
a23fd118e437af0a7877dd313db8fdaa3537c675yl ((char *)mem +
a23fd118e437af0a7877dd313db8fdaa3537c675yl * We are here because the host driver tries to
a23fd118e437af0a7877dd313db8fdaa3537c675yl * do a soft reset on the device.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Since the device soft reset clears the SPDM table, copy
a23fd118e437af0a7877dd313db8fdaa3537c675yl * the entries from the local SPDM table to the actual one.
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Log an warning */
a23fd118e437af0a7877dd313db8fdaa3537c675yl "SPDM table update from local"
a23fd118e437af0a7877dd313db8fdaa3537c675yl " memory failed");
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Set the receive traffic steering mode from default(classic)
a23fd118e437af0a7877dd313db8fdaa3537c675yl * to enhanced.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * We may not need to configure rts_rth_jhash_cfg register as the
a23fd118e437af0a7877dd313db8fdaa3537c675yl * default values are good enough to calculate the hash.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * As of now, set all the rth mask registers to zero. TODO.
a23fd118e437af0a7877dd313db8fdaa3537c675yl for(i = 0; i < 5; i++) {
a23fd118e437af0a7877dd313db8fdaa3537c675yl val64 |= XGE_HAL_RTS_RTH_IPV4_EN | XGE_HAL_RTS_RTH_TCP_IPV4_EN;
a23fd118e437af0a7877dd313db8fdaa3537c675yl * __hal_device_pci_init
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Initialize certain PCI/PCI-X configuration registers
a23fd118e437af0a7877dd313db8fdaa3537c675yl * with recommended values. Save config space for future hw resets.
a23fd118e437af0a7877dd313db8fdaa3537c675ylstatic void
a23fd118e437af0a7877dd313db8fdaa3537c675yl int i, pcisize = 0;
7eced415e5dd557aef2d78483b5a7785f0e13670xw /* Store PCI device ID and revision for future references where in we
7eced415e5dd557aef2d78483b5a7785f0e13670xw * decide Xena revision using PCI sub system ID */
7eced415e5dd557aef2d78483b5a7785f0e13670xw else if (xge_hal_device_check_id(hldev) == XGE_HAL_CARD_XENA)
7eced415e5dd557aef2d78483b5a7785f0e13670xw /* save original PCI config space to restore it on device_terminate() */
7eced415e5dd557aef2d78483b5a7785f0e13670xw for (i = 0; i < pcisize; i++) {
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Set the PErr Repconse bit and SERR in PCI command register. */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Set user spcecified value for the PCI Latency Timer */
a23fd118e437af0a7877dd313db8fdaa3537c675yl hldev->config.latency_timer != XGE_HAL_USE_BIOS_DEFAULT_LATENCY) {
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Read back latency timer to reflect it into user level */
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_offsetof(xge_hal_pci_config_le_t, latency_timer), &val);
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Enable Data Parity Error Recovery in PCI-X command register. */
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_offsetof(xge_hal_pci_config_le_t, pcix_command), &cmd);
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_offsetof(xge_hal_pci_config_le_t, pcix_command), cmd);
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Set MMRB count in PCI-X command register. */
a23fd118e437af0a7877dd313db8fdaa3537c675yl if (hldev->config.mmrb_count != XGE_HAL_DEFAULT_BIOS_MMRB_COUNT) {
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Read back MMRB count to reflect it into user level */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Setting Maximum outstanding splits based on system type. */
a23fd118e437af0a7877dd313db8fdaa3537c675yl if (hldev->config.max_splits_trans != XGE_HAL_USE_BIOS_DEFAULT_SPLITS) {
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Read back max split trans to reflect it into user level */
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_offsetof(xge_hal_pci_config_le_t, pcix_command), &cmd);
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Forcibly disabling relaxed ordering capability of the card. */
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_offsetof(xge_hal_pci_config_le_t, pcix_command), &cmd);
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_offsetof(xge_hal_pci_config_le_t, pcix_command), cmd);
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* save PCI config space for future resets */
a23fd118e437af0a7877dd313db8fdaa3537c675yl for (i = 0; i < pcisize; i++) {
a23fd118e437af0a7877dd313db8fdaa3537c675yl * __hal_device_pci_info_get - Get PCI bus informations such as width, frequency
a23fd118e437af0a7877dd313db8fdaa3537c675yl * and mode.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @devh: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @pci_mode: pointer to a variable of enumerated type
a23fd118e437af0a7877dd313db8fdaa3537c675yl * xge_hal_pci_mode_e{}.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @bus_frequency: pointer to a variable of enumerated type
a23fd118e437af0a7877dd313db8fdaa3537c675yl * xge_hal_pci_bus_frequency_e{}.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @bus_width: pointer to a variable of enumerated type
a23fd118e437af0a7877dd313db8fdaa3537c675yl * xge_hal_pci_bus_width_e{}.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Get pci mode, frequency, and PCI bus width.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Returns: one of the xge_hal_status_e{} enumerated types.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * XGE_HAL_OK - for success.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * XGE_HAL_ERR_INVALID_PCI_INFO - for invalid PCI information from the card.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * XGE_HAL_ERR_BAD_DEVICE_ID - for invalid card.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * See Also: xge_hal_pci_mode_e, xge_hal_pci_mode_e, xge_hal_pci_width_e.
a23fd118e437af0a7877dd313db8fdaa3537c675yl__hal_device_pci_info_get(xge_hal_device_h devh, xge_hal_pci_mode_e *pci_mode,
a23fd118e437af0a7877dd313db8fdaa3537c675yl u64 pci_info = xge_os_pio_mem_read64(hldev->pdev, hldev->regh0,
a23fd118e437af0a7877dd313db8fdaa3537c675yl (unsigned long long)pci_info);
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* for XENA, we report PCI mode, only. PCI bus frequency, and bus width
a23fd118e437af0a7877dd313db8fdaa3537c675yl * are set to unknown */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* initialize defaults for XENA */
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_debug_device(XGE_TRACE, "PCI info: mode %d", *pci_mode);
a23fd118e437af0a7877dd313db8fdaa3537c675yl * There is no way to detect BUS frequency on Xena,
a23fd118e437af0a7877dd313db8fdaa3537c675yl * so, in case of automatic configuration we hopelessly
a23fd118e437af0a7877dd313db8fdaa3537c675yl * assume 133MHZ.
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_debug_device(XGE_ERR, "invalid device id %d", card_id);
a23fd118e437af0a7877dd313db8fdaa3537c675yl * __hal_device_handle_link_up_ind
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Link up indication handler. The function is invoked by HAL when
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Xframe indicates that the link is up for programmable amount of time.
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_hal_pci_bar0_t *bar0 = (xge_hal_pci_bar0_t *)(void *)hldev->bar0;
a23fd118e437af0a7877dd313db8fdaa3537c675yl * If the previous link state is not down, return.
a23fd118e437af0a7877dd313db8fdaa3537c675yl if (xge_hal_device_check_id(hldev) == XGE_HAL_CARD_HERC){
a23fd118e437af0a7877dd313db8fdaa3537c675yl "link up indication while link is up, ignoring..");
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Now re-enable it as due to noise, hardware turned it off */
a23fd118e437af0a7877dd313db8fdaa3537c675yl val64 = val64 & (~XGE_HAL_ADAPTER_ECC_EN); /* ECC enable */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Turn on the Laser */
a23fd118e437af0a7877dd313db8fdaa3537c675yl if (xge_hal_device_check_id(hldev) == XGE_HAL_CARD_HERC) {
a23fd118e437af0a7877dd313db8fdaa3537c675yl "fail to transition link to up...");
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Mask the Link Up interrupt and unmask the Link Down
a23fd118e437af0a7877dd313db8fdaa3537c675yl * interrupt.
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* notify ULD */
a23fd118e437af0a7877dd313db8fdaa3537c675yl if (__hal_device_register_poll(hldev, &bar0->adapter_status, 0,
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* notify ULD */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* link is up after been enabled */
a23fd118e437af0a7877dd313db8fdaa3537c675yl "fail to transition link to up...");
a23fd118e437af0a7877dd313db8fdaa3537c675yl * __hal_device_handle_link_down_ind
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Link down indication handler. The function is invoked by HAL when
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Xframe indicates that the link is down.
a23fd118e437af0a7877dd313db8fdaa3537c675yl__hal_device_handle_link_down_ind(xge_hal_device_t *hldev)
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_hal_pci_bar0_t *bar0 = (xge_hal_pci_bar0_t *)(void *)hldev->bar0;
a23fd118e437af0a7877dd313db8fdaa3537c675yl * If the previous link state is not up, return.
a23fd118e437af0a7877dd313db8fdaa3537c675yl if (xge_hal_device_check_id(hldev) == XGE_HAL_CARD_HERC){
a23fd118e437af0a7877dd313db8fdaa3537c675yl "link down indication while link is down, ignoring..");
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* try to debounce the link only if the adapter is enabled. */
a23fd118e437af0a7877dd313db8fdaa3537c675yl if (__hal_device_register_poll(hldev, &bar0->adapter_status, 0,
a23fd118e437af0a7877dd313db8fdaa3537c675yl "link is actually up (possible noisy link?), ignoring.");
a23fd118e437af0a7877dd313db8fdaa3537c675yl return(0);
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* turn off LED */
a23fd118e437af0a7877dd313db8fdaa3537c675yl if (xge_hal_device_check_id(hldev) == XGE_HAL_CARD_HERC) {
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Mask the Link Down interrupt and unmask the Link up
a23fd118e437af0a7877dd313db8fdaa3537c675yl * interrupt
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* link is down */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* notify ULD */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* notify ULD */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* link is down */
a23fd118e437af0a7877dd313db8fdaa3537c675yl * __hal_device_handle_link_state_change
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Link state change handler. The function is invoked by HAL when
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Xframe indicates link state change condition. The code here makes sure to
a23fd118e437af0a7877dd313db8fdaa3537c675yl * 1) ignore redundant state change indications;
a23fd118e437af0a7877dd313db8fdaa3537c675yl * 2) execute link-up sequence, and handle the failure to bring the link up;
a23fd118e437af0a7877dd313db8fdaa3537c675yl * 3) generate XGE_HAL_LINK_UP/DOWN event for the subsequent handling by
a23fd118e437af0a7877dd313db8fdaa3537c675yl * upper-layer driver (ULD).
a23fd118e437af0a7877dd313db8fdaa3537c675yl__hal_device_handle_link_state_change(xge_hal_device_t *hldev)
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_hal_pci_bar0_t *bar0 = (xge_hal_pci_bar0_t *)(void *)hldev->bar0;
8347601bcb0a439f6e50fc36b4039a73d08700e1yl int i = 0;
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* If the adapter is not enabled but the hal thinks we are in the up
a23fd118e437af0a7877dd313db8fdaa3537c675yl * state then transition to the down state.
8347601bcb0a439f6e50fc36b4039a73d08700e1yl /* check if the current link state is still considered
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * to be changed. This way we will make sure that this is
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * not a noise which needs to be filtered out */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* If the current link state is same as previous, just return */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* detected state change */
a23fd118e437af0a7877dd313db8fdaa3537c675ylstatic void
a23fd118e437af0a7877dd313db8fdaa3537c675yl__hal_device_handle_serr(xge_hal_device_t *hldev, char *reg, u64 value)
a23fd118e437af0a7877dd313db8fdaa3537c675yl (void) xge_queue_produce(hldev->queueh, XGE_HAL_EVENT_SERR, hldev,
a23fd118e437af0a7877dd313db8fdaa3537c675yl (unsigned long long) value);
a23fd118e437af0a7877dd313db8fdaa3537c675ylstatic void
a23fd118e437af0a7877dd313db8fdaa3537c675yl__hal_device_handle_eccerr(xge_hal_device_t *hldev, char *reg, u64 value)
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Herc smart enough to recover on its own! */
a23fd118e437af0a7877dd313db8fdaa3537c675yl if (xge_hal_device_check_id(hldev) == XGE_HAL_CARD_XENA) {
a23fd118e437af0a7877dd313db8fdaa3537c675yl (unsigned long long) value);
a23fd118e437af0a7877dd313db8fdaa3537c675ylstatic void
a23fd118e437af0a7877dd313db8fdaa3537c675yl__hal_device_handle_parityerr(xge_hal_device_t *hldev, char *reg, u64 value)
a23fd118e437af0a7877dd313db8fdaa3537c675yl (unsigned long long) value);
a23fd118e437af0a7877dd313db8fdaa3537c675ylstatic void
a23fd118e437af0a7877dd313db8fdaa3537c675yl * __hal_device_hw_initialize
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Initialize Xframe hardware.
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_hal_pci_bar0_t *bar0 = (xge_hal_pci_bar0_t *)(void *)hldev->bar0;
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Set proper endian settings and verify the same by reading the PIF
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Feed-back register. */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* update the pci mode, frequency, and width */
a23fd118e437af0a7877dd313db8fdaa3537c675yl &hldev->bus_frequency, &hldev->bus_width) != XGE_HAL_OK){
a23fd118e437af0a7877dd313db8fdaa3537c675yl hldev->bus_frequency = XGE_HAL_PCI_BUS_FREQUENCY_UNKNOWN;
a23fd118e437af0a7877dd313db8fdaa3537c675yl * FIXME: this cannot happen.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * But if it happens we cannot continue just like that
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* PCI optimization: set TxReqTimeOut
a23fd118e437af0a7877dd313db8fdaa3537c675yl * register (0x800+0x120) to 0x1ff or
a23fd118e437af0a7877dd313db8fdaa3537c675yl * something close to this.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Note: not to be used for PCI-X! */
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_debug_device(XGE_TRACE, "%s", "optimizing for PCI mode");
7eced415e5dd557aef2d78483b5a7785f0e13670xw if (hldev->bus_frequency == XGE_HAL_PCI_BUS_FREQUENCY_266MHZ ||
7eced415e5dd557aef2d78483b5a7785f0e13670xw hldev->bus_frequency == XGE_HAL_PCI_BUS_FREQUENCY_250MHZ) {
7eced415e5dd557aef2d78483b5a7785f0e13670xw /* Optimizing for PCI-X 266/250 */
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_debug_device(XGE_TRACE, "%s", "optimizing for PCI-X 266/250 modes");
7eced415e5dd557aef2d78483b5a7785f0e13670xw if (xge_hal_device_check_id(hldev) == XGE_HAL_CARD_HERC) {
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_os_pio_mem_write64(hldev->pdev, hldev->regh0, 0x4000000000000ULL,
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_os_pio_mem_write64(hldev->pdev, hldev->regh0, 0x4000000000000ULL,
8347601bcb0a439f6e50fc36b4039a73d08700e1yl /* added this to set the no of bytes used to update lso_bytes_sent
8347601bcb0a439f6e50fc36b4039a73d08700e1yl returned TxD0 */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* added this to clear the EOI_RESET field while leaving XGXS_RESET
a23fd118e437af0a7877dd313db8fdaa3537c675yl * in reset, then a 1-second delay */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Clear the XGXS_RESET field of the SW_RESET register in order to
a23fd118e437af0a7877dd313db8fdaa3537c675yl * release the XGXS from reset. Its reset value is 0xA5; write 0x00
a23fd118e437af0a7877dd313db8fdaa3537c675yl * to activate the XGXS. The core requires a minimum 500 us reset.*/
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_os_pio_mem_write64(hldev->pdev, hldev->regh0, 0, &bar0->sw_reset);
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* read registers in all blocks */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* set default MTU and steer based on length*/
a23fd118e437af0a7877dd313db8fdaa3537c675yl __hal_ring_mtu_set(hldev, hldev->config.mtu+22); // Alway set 22 bytes extra for steering to work
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Keep its PCI REQ# line asserted during a write
a23fd118e437af0a7877dd313db8fdaa3537c675yl * transaction up to the end of the transaction
7eced415e5dd557aef2d78483b5a7785f0e13670xw if (xge_hal_device_check_id(hldev) == XGE_HAL_CARD_HERC) {
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * bimodal interrupts is when all Rx traffic interrupts
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * will go to TTI, so we need to adjust RTI settings and
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * use adaptive TTI timer. We need to make sure RTI is
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * properly configured to sane value which will not
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * distrupt bimodal behavior.
8347601bcb0a439f6e50fc36b4039a73d08700e1yl /* force polling_cnt to be "0", otherwise
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * IRQ workload statistics will be screwed. This could
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * be worked out in TXPIC handler later. */
8347601bcb0a439f6e50fc36b4039a73d08700e1yl /* disable all TTI < 56 */
8347601bcb0a439f6e50fc36b4039a73d08700e1yl for (i=0; i<XGE_HAL_MAX_FIFO_NUM; i++) {
8347601bcb0a439f6e50fc36b4039a73d08700e1yl for (j=0; j<XGE_HAL_MAX_FIFO_TTI_NUM; j++) {
8347601bcb0a439f6e50fc36b4039a73d08700e1yl /* now configure bimodal interrupts */
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_debug_device(XGE_ERR, "__hal_device_rts_mac_configure Failed ");
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_debug_device(XGE_ERR, "__hal_device_rts_port_configure Failed ");
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_debug_device(XGE_ERR, "__hal_device_rts_qos_configure Failed ");
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* make sure all interrupts going to be disabled at the moment */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* SXE-008 Transmit DMA arbitration issue */
a23fd118e437af0a7877dd313db8fdaa3537c675yl if (xge_hal_device_check_id(hldev) == XGE_HAL_CARD_XENA &&
a23fd118e437af0a7877dd313db8fdaa3537c675yl if (__hal_device_register_poll(hldev, &bar0->adapter_status, 1,
a23fd118e437af0a7877dd313db8fdaa3537c675yl XGE_HAL_DEVICE_QUIESCENT_WAIT_MAX_MILLIS) != XGE_HAL_OK) {
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_debug_device(XGE_TRACE, "%s", "PRC is not QUIESCENT!");
8347601bcb0a439f6e50fc36b4039a73d08700e1yl xge_debug_device(XGE_TRACE, "device 0x"XGE_OS_LLXFMT" is quiescent",
7eced415e5dd557aef2d78483b5a7785f0e13670xw * If MSI is enabled, ensure that One Shot for MSI in PCI_CTRL
7eced415e5dd557aef2d78483b5a7785f0e13670xw * is disabled.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * __hal_device_reset - Reset device only.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Reset the device, and subsequently restore
a23fd118e437af0a7877dd313db8fdaa3537c675yl * the previously saved PCI configuration space.
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_hal_pci_bar0_t *bar0 = (xge_hal_pci_bar0_t *)(void *)hldev->bar0;
7eced415e5dd557aef2d78483b5a7785f0e13670xw if (xge_hal_device_check_id(hldev) == XGE_HAL_CARD_HERC) {
7eced415e5dd557aef2d78483b5a7785f0e13670xw // 2 64bit words for each entry
a23fd118e437af0a7877dd313db8fdaa3537c675yl (u32)(XGE_HAL_SW_RESET_ALL>>32), (char *)&bar0->sw_reset);
a23fd118e437af0a7877dd313db8fdaa3537c675yl#if defined(XGE_OS_HOST_LITTLE_ENDIAN) || defined(XGE_OS_PIO_LITTLE_ENDIAN)
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* swap it */
8347601bcb0a439f6e50fc36b4039a73d08700e1yl pcisize = (xge_hal_device_check_id(hldev) == XGE_HAL_CARD_HERC)?
8347601bcb0a439f6e50fc36b4039a73d08700e1yl /* Poll for no more than 1 second */
8347601bcb0a439f6e50fc36b4039a73d08700e1yl for (i = 0; i < XGE_HAL_MAX_PCI_CONFIG_SPACE_REINIT; i++)
8347601bcb0a439f6e50fc36b4039a73d08700e1yl for (j = 0; j < pcisize; j++) {
8347601bcb0a439f6e50fc36b4039a73d08700e1yl if (xge_hal_device_check_id(hldev) != XGE_HAL_CARD_UNKNOWN)
8347601bcb0a439f6e50fc36b4039a73d08700e1yl if (xge_hal_device_check_id(hldev) == XGE_HAL_CARD_UNKNOWN)
a23fd118e437af0a7877dd313db8fdaa3537c675yl if (xge_hal_device_check_id(hldev) == XGE_HAL_CARD_HERC) {
a23fd118e437af0a7877dd313db8fdaa3537c675yl } else if (xge_hal_device_check_id(hldev) == XGE_HAL_CARD_XENA) {
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Restore MSI-X vector table */
7eced415e5dd557aef2d78483b5a7785f0e13670xw if (xge_hal_device_check_id(hldev) == XGE_HAL_CARD_HERC) {
7eced415e5dd557aef2d78483b5a7785f0e13670xw * 94: MSIXTable 00000004 ( BIR:4 Offset:0x0 )
7eced415e5dd557aef2d78483b5a7785f0e13670xw * 98: PBATable 00000404 ( BIR:4 Offset:0x400 )
7eced415e5dd557aef2d78483b5a7785f0e13670xw /* 2 64bit words for each entry */
a23fd118e437af0a7877dd313db8fdaa3537c675yl * __hal_device_poll - General private routine to poll the device.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Returns: one of the xge_hal_status_e{} enumerated types.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * XGE_HAL_OK - for success.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * XGE_HAL_ERR_CRITICAL - when encounters critical error.
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Handling SERR errors by forcing a H/W reset. */
a23fd118e437af0a7877dd313db8fdaa3537c675yl err_reg = xge_os_pio_mem_read64(hldev->pdev, hldev->regh0,
a23fd118e437af0a7877dd313db8fdaa3537c675yl err_reg = xge_os_pio_mem_read64(hldev->pdev, hldev->regh0,
a23fd118e437af0a7877dd313db8fdaa3537c675yl __hal_device_handle_parityerr(hldev, "misc_int_reg", err_reg);
7eced415e5dd557aef2d78483b5a7785f0e13670xw if ((xge_hal_device_check_id(hldev) == XGE_HAL_CARD_XENA) ||
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Handling link status change error Intr */
a23fd118e437af0a7877dd313db8fdaa3537c675yl err_reg = xge_os_pio_mem_read64(hldev->pdev, hldev->regh0,
a23fd118e437af0a7877dd313db8fdaa3537c675yl __hal_device_handle_eccerr(hldev, "inject_ecc", err_reg);
a23fd118e437af0a7877dd313db8fdaa3537c675yl * __hal_verify_pcc_idle - Verify All Enbled PCC are IDLE or not
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @adp_status: Adapter Status value
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Usage: See xge_hal_device_enable{}.
a23fd118e437af0a7877dd313db8fdaa3537c675yl__hal_verify_pcc_idle(xge_hal_device_t *hldev, u64 adp_status)
a23fd118e437af0a7877dd313db8fdaa3537c675yl if (xge_hal_device_check_id(hldev) == XGE_HAL_CARD_XENA &&
a23fd118e437af0a7877dd313db8fdaa3537c675yl * For Xena 1,2,3 we enable only 4 PCCs Due to
a23fd118e437af0a7877dd313db8fdaa3537c675yl * SXE-008 (Transmit DMA arbitration issue)
a23fd118e437af0a7877dd313db8fdaa3537c675yl if ((adp_status & XGE_HAL_ADAPTER_STATUS_RMAC_PCC_4_IDLE)
a23fd118e437af0a7877dd313db8fdaa3537c675yl "PCC is not IDLE after adapter enabled!");
a23fd118e437af0a7877dd313db8fdaa3537c675yl if ((adp_status & XGE_HAL_ADAPTER_STATUS_RMAC_PCC_IDLE) !=
a23fd118e437af0a7877dd313db8fdaa3537c675yl "PCC is not IDLE after adapter enabled!");
8347601bcb0a439f6e50fc36b4039a73d08700e1ylstatic void
8347601bcb0a439f6e50fc36b4039a73d08700e1yl__hal_update_bimodal(xge_hal_device_t *hldev, int ring_no)
8347601bcb0a439f6e50fc36b4039a73d08700e1yl int tval, d, iwl_avg, len_avg, bytes_avg, bytes_hist, d_hist;
8347601bcb0a439f6e50fc36b4039a73d08700e1yl int iwl_rxcnt, iwl_txcnt, iwl_txavg, len_rxavg, iwl_rxavg, len_txavg;
8347601bcb0a439f6e50fc36b4039a73d08700e1yl static int history_idx = 0;
8347601bcb0a439f6e50fc36b4039a73d08700e1yl static int hist_adj_timer = 0;
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * tval - current value of this bimodal timer
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * d - how many interrupts we were getting since last
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * bimodal timer tick.
8347601bcb0a439f6e50fc36b4039a73d08700e1yl /* advance bimodal interrupt counter */
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * iwl_cnt - how many interrupts we've got since last
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * bimodal timer tick.
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * we need to take hldev->config.isr_polling_cnt into account
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * but for some reason this line causing GCC to produce wrong
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * code on Solaris. As of now, if bimodal_interrupts is configured
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * hldev->config.isr_polling_cnt is forced to be "0".
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * iwl_cnt = iwl_cnt / (hldev->config.isr_polling_cnt + 1); */
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * iwl_avg - how many RXDs on avarage been processed since
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * last bimodal timer tick. This indirectly includes
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * CPU utilizations.
8347601bcb0a439f6e50fc36b4039a73d08700e1yl iwl_rxavg = hldev->irq_workload_rxd[ring_no] / iwl_rxcnt;
8347601bcb0a439f6e50fc36b4039a73d08700e1yl iwl_txavg = hldev->irq_workload_txd[ring_no] / iwl_txcnt;
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * len_avg - how many bytes on avarage been processed since
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * last bimodal timer tick. i.e. avarage frame size.
8347601bcb0a439f6e50fc36b4039a73d08700e1yl /* align on low boundary */
8347601bcb0a439f6e50fc36b4039a73d08700e1yl /* reset faster */
8347601bcb0a439f6e50fc36b4039a73d08700e1yl /* reset history */
8347601bcb0a439f6e50fc36b4039a73d08700e1yl for (i = 0; i < _HIST_SIZE; i++)
8347601bcb0a439f6e50fc36b4039a73d08700e1yl /* always try to ajust timer to the best throughput value */
8347601bcb0a439f6e50fc36b4039a73d08700e1yl for (i = 0; i < _HIST_SIZE; i++) {
8347601bcb0a439f6e50fc36b4039a73d08700e1yl /* do not re-configure until history is gathered */
8347601bcb0a439f6e50fc36b4039a73d08700e1yl// xge_os_printf("d %d iwl_avg %d len_avg %d:%d:%d tval %d avg %d hist %d pstep %d",
8347601bcb0a439f6e50fc36b4039a73d08700e1yl// d, iwl_avg, len_txavg, len_rxavg, len_avg, tval, d*bytes_avg,
8347601bcb0a439f6e50fc36b4039a73d08700e1yl// d_hist*bytes_hist, pstep);
8347601bcb0a439f6e50fc36b4039a73d08700e1yl /* make an adaptive step */
8347601bcb0a439f6e50fc36b4039a73d08700e1yl if (d * bytes_avg < d_hist * bytes_hist && hist_adj_timer++ > _HIST_ADJ_TIMER) {
8347601bcb0a439f6e50fc36b4039a73d08700e1yl } else if ((tval - _STEP) >= hldev->config.bimodal_timer_lo_us) {
8347601bcb0a439f6e50fc36b4039a73d08700e1yl /* enable TTI range A for better latencies */
8347601bcb0a439f6e50fc36b4039a73d08700e1yl if (tval <= hldev->config.bimodal_timer_lo_us && iwl_avg > 2)
8347601bcb0a439f6e50fc36b4039a73d08700e1yl /* reset workload statistics counters */
8347601bcb0a439f6e50fc36b4039a73d08700e1yl /* reconfigure TTI56 + ring_no with new timer value */
a23fd118e437af0a7877dd313db8fdaa3537c675ylstatic void
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* urange_a adaptive coalescing */
a23fd118e437af0a7877dd313db8fdaa3537c675yl for (i=0; i<XGE_HAL_MAX_RING_NUM; i++)
a23fd118e437af0a7877dd313db8fdaa3537c675yl for (i=0; i<XGE_HAL_MAX_RING_NUM; i++)
a23fd118e437af0a7877dd313db8fdaa3537c675yl * __hal_device_handle_mc - Handle MC interrupt reason
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @reason: interrupt reason
a23fd118e437af0a7877dd313db8fdaa3537c675yl__hal_device_handle_mc(xge_hal_device_t *hldev, u64 reason)
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* those two should result in device reset */
a23fd118e437af0a7877dd313db8fdaa3537c675yl * __hal_device_handle_pic - Handle non-traffic PIC interrupt reason
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @reason: interrupt reason
a23fd118e437af0a7877dd313db8fdaa3537c675yl__hal_device_handle_pic(xge_hal_device_t *hldev, u64 reason)
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* FIXME: handle register */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* FIXME: handle register */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* FIXME: handle register */
7eced415e5dd557aef2d78483b5a7785f0e13670xw if ((xge_hal_device_check_id(hldev) == XGE_HAL_CARD_HERC) &&
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Check for Link interrupts. If both Link Up/Down
a23fd118e437af0a7877dd313db8fdaa3537c675yl * bits are set, clear both and check adapter status
a23fd118e437af0a7877dd313db8fdaa3537c675yl (unsigned long long)val64);
a23fd118e437af0a7877dd313db8fdaa3537c675yl (unsigned long long)val64);
a23fd118e437af0a7877dd313db8fdaa3537c675yl (unsigned long long)val64);
a23fd118e437af0a7877dd313db8fdaa3537c675yl * __hal_device_handle_txpic - Handle TxPIC interrupt reason
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @reason: interrupt reason
a23fd118e437af0a7877dd313db8fdaa3537c675yl__hal_device_handle_txpic(xge_hal_device_t *hldev, u64 reason)
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * This feature implements adaptive receive interrupt
a23fd118e437af0a7877dd313db8fdaa3537c675yl * coalecing. It is disabled by default. To enable it
a23fd118e437af0a7877dd313db8fdaa3537c675yl * set hldev->config.rxufca_lo_lim to be not equal to
a23fd118e437af0a7877dd313db8fdaa3537c675yl * hldev->config.rxufca_hi_lim.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * We are using HW timer for this feature, so
a23fd118e437af0a7877dd313db8fdaa3537c675yl * use needs to configure hldev->config.rxufca_lbolt_period
a23fd118e437af0a7877dd313db8fdaa3537c675yl * which is essentially a time slice of timer.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * For those who familiar with Linux, lbolt means jiffies
a23fd118e437af0a7877dd313db8fdaa3537c675yl * of this timer. I.e. timer tick.
8347601bcb0a439f6e50fc36b4039a73d08700e1yl for (i = 0; i < XGE_HAL_MAX_RING_NUM; i++) {
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * This feature implements adaptive TTI timer re-calculation
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * based on host utilization, number of interrupt processed,
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * number of RXD per tick and avarage length of packets per
8347601bcb0a439f6e50fc36b4039a73d08700e1yl for (i = 0; i < XGE_HAL_MAX_RING_NUM; i++) {
a23fd118e437af0a7877dd313db8fdaa3537c675yl * __hal_device_handle_txdma - Handle TxDMA interrupt reason
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @reason: interrupt reason
a23fd118e437af0a7877dd313db8fdaa3537c675yl__hal_device_handle_txdma(xge_hal_device_t *hldev, u64 reason)
7eced415e5dd557aef2d78483b5a7785f0e13670xw temp64 = XGE_HAL_TDA_Fn_ECC_DB_ERR|XGE_HAL_TDA_SM0_ERR_ALARM
7eced415e5dd557aef2d78483b5a7785f0e13670xw temp64 = XGE_HAL_PCC_FB_ECC_DB_ERR|XGE_HAL_PCC_TXB_ECC_DB_ERR
a23fd118e437af0a7877dd313db8fdaa3537c675yl * __hal_device_handle_txmac - Handle TxMAC interrupt reason
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @reason: interrupt reason
a23fd118e437af0a7877dd313db8fdaa3537c675yl__hal_device_handle_txmac(xge_hal_device_t *hldev, u64 reason)
7eced415e5dd557aef2d78483b5a7785f0e13670xw temp64 = XGE_HAL_TMAC_TX_BUF_OVRN|XGE_HAL_TMAC_TX_SM_ERR;
a23fd118e437af0a7877dd313db8fdaa3537c675yl * __hal_device_handle_txxgxs - Handle TxXGXS interrupt reason
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @reason: interrupt reason
a23fd118e437af0a7877dd313db8fdaa3537c675yl__hal_device_handle_txxgxs(xge_hal_device_t *hldev, u64 reason)
7eced415e5dd557aef2d78483b5a7785f0e13670xw temp64 = XGE_HAL_TXGXS_ESTORE_UFLOW|XGE_HAL_TXGXS_TX_SM_ERR;
a23fd118e437af0a7877dd313db8fdaa3537c675yl * __hal_device_handle_rxpic - Handle RxPIC interrupt reason
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @reason: interrupt reason
a23fd118e437af0a7877dd313db8fdaa3537c675yl__hal_device_handle_rxpic(xge_hal_device_t *hldev, u64 reason)
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* FIXME: handle register */
a23fd118e437af0a7877dd313db8fdaa3537c675yl * __hal_device_handle_rxdma - Handle RxDMA interrupt reason
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @reason: interrupt reason
a23fd118e437af0a7877dd313db8fdaa3537c675yl__hal_device_handle_rxdma(xge_hal_device_t *hldev, u64 reason)
7eced415e5dd557aef2d78483b5a7785f0e13670xw temp64 = XGE_HAL_RC_PRCn_ECC_DB_ERR|XGE_HAL_RC_FTC_ECC_DB_ERR
7eced415e5dd557aef2d78483b5a7785f0e13670xw temp64 = XGE_HAL_RPA_SM_ERR_ALARM|XGE_HAL_RPA_CREDIT_ERR;
a23fd118e437af0a7877dd313db8fdaa3537c675yl * __hal_device_handle_rxmac - Handle RxMAC interrupt reason
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @reason: interrupt reason
a23fd118e437af0a7877dd313db8fdaa3537c675yl__hal_device_handle_rxmac(xge_hal_device_t *hldev, u64 reason)
7eced415e5dd557aef2d78483b5a7785f0e13670xw temp64 = XGE_HAL_RMAC_RX_BUFF_OVRN|XGE_HAL_RMAC_RX_SM_ERR;
a23fd118e437af0a7877dd313db8fdaa3537c675yl * __hal_device_handle_rxxgxs - Handle RxXGXS interrupt reason
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @reason: interrupt reason
a23fd118e437af0a7877dd313db8fdaa3537c675yl__hal_device_handle_rxxgxs(xge_hal_device_t *hldev, u64 reason)
7eced415e5dd557aef2d78483b5a7785f0e13670xw temp64 = XGE_HAL_RXGXS_ESTORE_OFLOW|XGE_HAL_RXGXS_RX_SM_ERR;
a23fd118e437af0a7877dd313db8fdaa3537c675yl * xge_hal_device_enable - Enable device.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Enable the specified device: bring up the link/interface.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Returns: XGE_HAL_OK - success.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * XGE_HAL_ERR_DEVICE_IS_NOT_QUIESCENT - Failed to restore the device
a23fd118e437af0a7877dd313db8fdaa3537c675yl * to a "quiescent" state.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * See also: xge_hal_status_e{}.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Usage: See ex_open{}.
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_hal_pci_bar0_t *bar0 = (xge_hal_pci_bar0_t *)(void *)hldev->bar0;
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Not needed in most cases, i.e.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * when device_disable() is followed by reset -
a23fd118e437af0a7877dd313db8fdaa3537c675yl * the latter copies back PCI config space, along with
a23fd118e437af0a7877dd313db8fdaa3537c675yl * the bus mastership - see __hal_device_reset().
a23fd118e437af0a7877dd313db8fdaa3537c675yl * However, there are/may-in-future be other cases, and
a23fd118e437af0a7877dd313db8fdaa3537c675yl * does not hurt.
a23fd118e437af0a7877dd313db8fdaa3537c675yl if (xge_hal_device_check_id(hldev) == XGE_HAL_CARD_HERC) {
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Configure the link stability period.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Use the link stability period 1 ms as default
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Clearing any possible Link up/down interrupts that
a23fd118e437af0a7877dd313db8fdaa3537c675yl * could have popped up just before Enabling the card.
a23fd118e437af0a7877dd313db8fdaa3537c675yl } else if (xge_hal_device_check_id(hldev) == XGE_HAL_CARD_XENA) {
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Clearing any possible Link state change interrupts that
a23fd118e437af0a7877dd313db8fdaa3537c675yl * could have popped up just before Enabling the card.
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Enabling Laser. */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* let link establish */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* set link down untill poll() routine will set it up (maybe) */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* If link is UP (adpter is connected) then enable the adapter */
a23fd118e437af0a7877dd313db8fdaa3537c675yl val64 = val64 | XGE_HAL_ADAPTER_CNTL_EN; /* adapter enable */
a23fd118e437af0a7877dd313db8fdaa3537c675yl val64 = val64 & (~XGE_HAL_ADAPTER_ECC_EN); /* ECC enable */
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_os_pio_mem_write64 (hldev->pdev, hldev->regh0, val64,
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* We spin here waiting for the Link to come up.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * This is the fix for the Link being unstable after the reset. */
a23fd118e437af0a7877dd313db8fdaa3537c675yl adp_status = xge_os_pio_mem_read64(hldev->pdev, hldev->regh0,
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Read the adapter control register for Adapter_enable bit */
a23fd118e437af0a7877dd313db8fdaa3537c675yl if (!(adp_status & (XGE_HAL_ADAPTER_STATUS_RMAC_REMOTE_FAULT |
8347601bcb0a439f6e50fc36b4039a73d08700e1yl ", link is up on "
a23fd118e437af0a7877dd313db8fdaa3537c675yl "adapter enable!",
a23fd118e437af0a7877dd313db8fdaa3537c675yl (unsigned long long)adp_status);
a23fd118e437af0a7877dd313db8fdaa3537c675yl break; /* out of for loop */
a23fd118e437af0a7877dd313db8fdaa3537c675yl j = 0; /* Reset the count */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Turn on the Laser */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Now re-enable it as due to noise, hardware
a23fd118e437af0a7877dd313db8fdaa3537c675yl * turned it off */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Here we are performing soft reset on XGXS to force link down.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Since link is already up, we will get link state change
a23fd118e437af0a7877dd313db8fdaa3537c675yl * poll notificatoin after adapter is enabled */
7eced415e5dd557aef2d78483b5a7785f0e13670xw (void) __hal_serial_mem_read64(hldev, &bar0->dtx_control);
7eced415e5dd557aef2d78483b5a7785f0e13670xw (void) __hal_serial_mem_read64(hldev, &bar0->dtx_control);
7eced415e5dd557aef2d78483b5a7785f0e13670xw (void) __hal_serial_mem_read64(hldev, &bar0->dtx_control);
a23fd118e437af0a7877dd313db8fdaa3537c675yl * With some switches the link state change interrupt does not
a23fd118e437af0a7877dd313db8fdaa3537c675yl * occur even though the xgxs reset is done as per SPN-006. So,
a23fd118e437af0a7877dd313db8fdaa3537c675yl * poll the adapter status register and check if the link state
a23fd118e437af0a7877dd313db8fdaa3537c675yl adp_status = xge_os_pio_mem_read64(hldev->pdev, hldev->regh0,
a23fd118e437af0a7877dd313db8fdaa3537c675yl if (!(adp_status & (XGE_HAL_ADAPTER_STATUS_RMAC_REMOTE_FAULT |
a23fd118e437af0a7877dd313db8fdaa3537c675yl "enable device causing link state change ind..");
a23fd118e437af0a7877dd313db8fdaa3537c675yl * xge_hal_device_disable - Disable Xframe adapter.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: Device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Disable this device. To gracefully reset the adapter, the host should:
a23fd118e437af0a7877dd313db8fdaa3537c675yl * - call xge_hal_device_disable();
a23fd118e437af0a7877dd313db8fdaa3537c675yl * - call xge_hal_device_intr_disable();
a23fd118e437af0a7877dd313db8fdaa3537c675yl * - close all opened channels and clean up outstanding resources;
a23fd118e437af0a7877dd313db8fdaa3537c675yl * - do some work (error recovery, change mtu, reset, etc);
a23fd118e437af0a7877dd313db8fdaa3537c675yl * - call xge_hal_device_enable();
a23fd118e437af0a7877dd313db8fdaa3537c675yl * - open channels, replenish RxDs, etc.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * - call xge_hal_device_intr_enable().
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Note: Disabling the device does _not_ include disabling of interrupts.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * After disabling the device stops receiving new frames but those frames
a23fd118e437af0a7877dd313db8fdaa3537c675yl * that were already in the pipe will keep coming for some few milliseconds.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Returns: XGE_HAL_OK - success.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * XGE_HAL_ERR_DEVICE_IS_NOT_QUIESCENT - Failed to restore the device to
a23fd118e437af0a7877dd313db8fdaa3537c675yl * a "quiescent" state.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * See also: xge_hal_status_e{}.
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_hal_pci_bar0_t *bar0 = (xge_hal_pci_bar0_t *)(void *)hldev->bar0;
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_debug_device(XGE_TRACE, "%s", "turn off laser, cleanup hardware");
a23fd118e437af0a7877dd313db8fdaa3537c675yl if (__hal_device_wait_quiescent(hldev, &val64) != XGE_HAL_OK) {
a23fd118e437af0a7877dd313db8fdaa3537c675yl if (__hal_device_register_poll(hldev, &bar0->adapter_status, 1,
a23fd118e437af0a7877dd313db8fdaa3537c675yl XGE_HAL_DEVICE_QUIESCENT_WAIT_MAX_MILLIS) != XGE_HAL_OK) {
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_debug_device(XGE_TRACE, "%s", "PRC is not QUIESCENT!");
a23fd118e437af0a7877dd313db8fdaa3537c675yl * xge_hal_device_reset - Reset device.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Soft-reset the device, reset the device stats except reset_cnt.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * After reset is done, will try to re-initialize HW.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Returns: XGE_HAL_OK - success.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * XGE_HAL_ERR_DEVICE_NOT_INITIALIZED - Device is not initialized.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * XGE_HAL_ERR_RESET_FAILED - Reset failed.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * See also: xge_hal_status_e{}.
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* increment the soft reset counter */
a23fd118e437af0a7877dd313db8fdaa3537c675yl u32 reset_cnt = hldev->stats.sw_dev_info_stats.soft_reset_cnt;
8347601bcb0a439f6e50fc36b4039a73d08700e1yl xge_debug_device(XGE_TRACE, "%s (%d)", "resetting the device", reset_cnt);
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* actual "soft" reset of the adapter */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* reset all stats including saved */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* increment reset counter */
a23fd118e437af0a7877dd313db8fdaa3537c675yl hldev->stats.sw_dev_info_stats.soft_reset_cnt = reset_cnt + 1;
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* re-initialize rxufca_intr_thres */
a23fd118e437af0a7877dd313db8fdaa3537c675yl hldev->rxufca_intr_thres = hldev->config.rxufca_intr_thres;
a23fd118e437af0a7877dd313db8fdaa3537c675yl * xge_hal_device_status - Check whether Xframe hardware is ready for
a23fd118e437af0a7877dd313db8fdaa3537c675yl * operation.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hw_status: Xframe status register. Returned by HAL.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Check whether Xframe hardware is ready for operation.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * The checking includes TDMA, RDMA, PFC, PIC, MC_DRAM, and the rest
a23fd118e437af0a7877dd313db8fdaa3537c675yl * hardware functional blocks.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Returns: XGE_HAL_OK if the device is ready for operation. Otherwise
a23fd118e437af0a7877dd313db8fdaa3537c675yl * returns XGE_HAL_FAIL. Also, fills in adapter status (in @hw_status).
a23fd118e437af0a7877dd313db8fdaa3537c675yl * See also: xge_hal_status_e{}.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Usage: See ex_open{}.
a23fd118e437af0a7877dd313db8fdaa3537c675ylxge_hal_device_status(xge_hal_device_t *hldev, u64 *hw_status)
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_hal_pci_bar0_t *bar0 = (xge_hal_pci_bar0_t *)(void *)hldev->bar0;
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_debug_device(XGE_TRACE, "%s", "TMAC BUF is not empty!");
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_debug_device(XGE_TRACE, "%s", "PIC is not QUIESCENT!");
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_debug_device(XGE_TRACE, "%s", "MC_DRAM is not ready!");
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_debug_device(XGE_TRACE, "%s", "MC_QUEUES is not ready!");
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_debug_device(XGE_TRACE, "%s", "M_PLL is not locked!");
7eced415e5dd557aef2d78483b5a7785f0e13670xw * Andrew: in PCI 33 mode, the P_PLL is not used, and therefore,
7eced415e5dd557aef2d78483b5a7785f0e13670xw * the the P_PLL_LOCK bit in the adapter_status register will
7eced415e5dd557aef2d78483b5a7785f0e13670xw * not be asserted.
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_debug_device(XGE_TRACE, "%s", "P_PLL is not locked!");
7eced415e5dd557aef2d78483b5a7785f0e13670xw__hal_device_msi_intr_endis(xge_hal_device_t *hldev, int flag)
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_hal_pci_bar0_t *bar0 = (xge_hal_pci_bar0_t *)hldev->bar0;
a23fd118e437af0a7877dd313db8fdaa3537c675yl * xge_hal_device_intr_enable - Enable Xframe interrupts.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @op: One of the xge_hal_device_intr_e enumerated values specifying
a23fd118e437af0a7877dd313db8fdaa3537c675yl * the type(s) of interrupts to enable.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Enable Xframe interrupts. The function is to be executed the last in
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Xframe initialization sequence.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * See also: xge_hal_device_intr_disable()
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* PRC initialization and configuration */
a23fd118e437af0a7877dd313db8fdaa3537c675yl channel = xge_container_of(item, xge_hal_channel_t, item);
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* enable traffic only interrupts */
8347601bcb0a439f6e50fc36b4039a73d08700e1yl if (hldev->config.intr_mode != XGE_HAL_INTR_MODE_IRQLINE) {
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * make sure all interrupts going to be disabled if MSI
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * is enabled.
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * Enable the Tx traffic interrupts only if the TTI feature is
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * enabled.
7eced415e5dd557aef2d78483b5a7785f0e13670xw * Enable MSI-X interrupts
7eced415e5dd557aef2d78483b5a7785f0e13670xw if (xge_hal_device_check_id(hldev) == XGE_HAL_CARD_HERC) {
7eced415e5dd557aef2d78483b5a7785f0e13670xw * To enable MSI-X, MSI also needs to be enabled,
7eced415e5dd557aef2d78483b5a7785f0e13670xw * due to a bug in the herc NIC.
7eced415e5dd557aef2d78483b5a7785f0e13670xw /* Enable the MSI-X interrupt for each configured channel */
7eced415e5dd557aef2d78483b5a7785f0e13670xw /* 0 vector is reserved for alarms */
7eced415e5dd557aef2d78483b5a7785f0e13670xw /* 0 vector is reserved for alarms */
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_debug_device(XGE_TRACE, "%s", "interrupts are enabled");
a23fd118e437af0a7877dd313db8fdaa3537c675yl * xge_hal_device_intr_disable - Disable Xframe interrupts.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @op: One of the xge_hal_device_intr_e enumerated values specifying
a23fd118e437af0a7877dd313db8fdaa3537c675yl * the type(s) of interrupts to disable.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Disable Xframe interrupts.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * See also: xge_hal_device_intr_enable()
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_hal_pci_bar0_t *bar0 = (xge_hal_pci_bar0_t *)(void *)hldev->bar0;
7eced415e5dd557aef2d78483b5a7785f0e13670xw if (xge_hal_device_check_id(hldev) == XGE_HAL_CARD_HERC) {
7eced415e5dd557aef2d78483b5a7785f0e13670xw * To disable MSI-X, MSI also needs to be disabled,
7eced415e5dd557aef2d78483b5a7785f0e13670xw * due to a bug in the herc NIC.
7eced415e5dd557aef2d78483b5a7785f0e13670xw /* Disable the MSI-X interrupt for each configured channel */
7eced415e5dd557aef2d78483b5a7785f0e13670xw /* 0 vector is reserved for alarms */
7eced415e5dd557aef2d78483b5a7785f0e13670xw /* 0 vector is reserved for alarms */
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Disable traffic only interrupts.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Tx traffic interrupts are used only if the TTI feature is
a23fd118e437af0a7877dd313db8fdaa3537c675yl * enabled.
a23fd118e437af0a7877dd313db8fdaa3537c675yl (hldev->config.sched_timer_us != XGE_HAL_SCHED_TIMER_DISABLED ?
a23fd118e437af0a7877dd313db8fdaa3537c675yl 0xFFFFFFFFFFFFFFFFULL,
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* disable all configured PRCs */
a23fd118e437af0a7877dd313db8fdaa3537c675yl channel = xge_container_of(item, xge_hal_channel_t, item);
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_debug_device(XGE_TRACE, "%s", "interrupts are disabled");
a23fd118e437af0a7877dd313db8fdaa3537c675yl * xge_hal_device_mcast_enable - Enable Xframe multicast addresses.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Enable Xframe multicast addresses.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Returns: XGE_HAL_OK on success.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * XGE_HAL_INF_MEM_STROBE_CMD_EXECUTING - Failed to enable mcast
a23fd118e437af0a7877dd313db8fdaa3537c675yl * feature within the time(timeout).
a23fd118e437af0a7877dd313db8fdaa3537c675yl * See also: xge_hal_device_mcast_disable(), xge_hal_status_e{}.
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Enable all Multicast addresses */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* upper layer may require to repeat */
a23fd118e437af0a7877dd313db8fdaa3537c675yl * xge_hal_device_mcast_disable - Disable Xframe multicast addresses.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Disable Xframe multicast addresses.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Returns: XGE_HAL_OK - success.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * XGE_HAL_INF_MEM_STROBE_CMD_EXECUTING - Failed to disable mcast
a23fd118e437af0a7877dd313db8fdaa3537c675yl * feature within the time(timeout).
a23fd118e437af0a7877dd313db8fdaa3537c675yl * See also: xge_hal_device_mcast_enable(), xge_hal_status_e{}.
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Disable all Multicast addresses */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* upper layer may require to repeat */
a23fd118e437af0a7877dd313db8fdaa3537c675yl * xge_hal_device_promisc_enable - Enable promiscuous mode.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Enable promiscuous mode of Xframe operation.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * See also: xge_hal_device_promisc_disable().
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Put the NIC into promiscuous mode */
a23fd118e437af0a7877dd313db8fdaa3537c675yl (unsigned long long)val64);
a23fd118e437af0a7877dd313db8fdaa3537c675yl * xge_hal_device_promisc_disable - Disable promiscuous mode.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Disable promiscuous mode of Xframe operation.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * See also: xge_hal_device_promisc_enable().
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Remove the NIC from promiscuous mode */
a23fd118e437af0a7877dd313db8fdaa3537c675yl (unsigned long long)val64);
a23fd118e437af0a7877dd313db8fdaa3537c675yl * xge_hal_device_macaddr_get - Get MAC addresses.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @index: MAC address index, in the range from 0 to
a23fd118e437af0a7877dd313db8fdaa3537c675yl * XGE_HAL_MAX_MAC_ADDRESSES.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @macaddr: MAC address. Returned by HAL.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Retrieve one of the stored MAC addresses by reading non-volatile
a23fd118e437af0a7877dd313db8fdaa3537c675yl * memory on the chip.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Up to %XGE_HAL_MAX_MAC_ADDRESSES addresses is supported.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Returns: XGE_HAL_OK - success.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * XGE_HAL_INF_MEM_STROBE_CMD_EXECUTING - Failed to retrieve the mac
a23fd118e437af0a7877dd313db8fdaa3537c675yl * address within the time(timeout).
a23fd118e437af0a7877dd313db8fdaa3537c675yl * XGE_HAL_ERR_OUT_OF_MAC_ADDRESSES - Invalid MAC address index.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * See also: xge_hal_device_macaddr_set(), xge_hal_status_e{}.
a23fd118e437af0a7877dd313db8fdaa3537c675ylxge_hal_device_macaddr_get(xge_hal_device_t *hldev, int index,
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_os_pio_mem_write64(hldev->pdev, hldev->regh0,0x0000010000000000,
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_os_pio_mem_write64(hldev->pdev, hldev->regh0,0x0000000000000000,
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* poll until done */
a23fd118e437af0a7877dd313db8fdaa3537c675yl if (__hal_device_register_poll(hldev, &bar0->rmac_addr_cmd_mem, 0,
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* upper layer may require to repeat */
a23fd118e437af0a7877dd313db8fdaa3537c675yl for (i=0; i < XGE_HAL_ETH_ALEN; i++) {
a23fd118e437af0a7877dd313db8fdaa3537c675yl for (i=0; i < XGE_HAL_ETH_ALEN; i++) {
a23fd118e437af0a7877dd313db8fdaa3537c675yl * xge_hal_device_macaddr_set - Set MAC address.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @index: MAC address index, in the range from 0 to
a23fd118e437af0a7877dd313db8fdaa3537c675yl * XGE_HAL_MAX_MAC_ADDRESSES.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @macaddr: New MAC address to configure.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Configure one of the available MAC address "slots".
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Up to %XGE_HAL_MAX_MAC_ADDRESSES addresses is supported.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Returns: XGE_HAL_OK - success.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * XGE_HAL_INF_MEM_STROBE_CMD_EXECUTING - Failed to set the new mac
a23fd118e437af0a7877dd313db8fdaa3537c675yl * address within the time(timeout).
a23fd118e437af0a7877dd313db8fdaa3537c675yl * XGE_HAL_ERR_OUT_OF_MAC_ADDRESSES - Invalid MAC address index.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * See also: xge_hal_device_macaddr_get(), xge_hal_status_e{}.
a23fd118e437af0a7877dd313db8fdaa3537c675ylxge_hal_device_macaddr_set(xge_hal_device_t *hldev, int index,
a23fd118e437af0a7877dd313db8fdaa3537c675yl for (i=0; i < XGE_HAL_ETH_ALEN; i++) {
a23fd118e437af0a7877dd313db8fdaa3537c675yl if (__hal_device_register_poll(hldev, &bar0->rmac_addr_cmd_mem, 0,
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* upper layer may require to repeat */
7eced415e5dd557aef2d78483b5a7785f0e13670xw * xge_hal_device_macaddr_clear - Set MAC address.
7eced415e5dd557aef2d78483b5a7785f0e13670xw * @hldev: HAL device handle.
7eced415e5dd557aef2d78483b5a7785f0e13670xw * @index: MAC address index, in the range from 0 to
7eced415e5dd557aef2d78483b5a7785f0e13670xw * XGE_HAL_MAX_MAC_ADDRESSES.
7eced415e5dd557aef2d78483b5a7785f0e13670xw * Clear one of the available MAC address "slots".
7eced415e5dd557aef2d78483b5a7785f0e13670xw * Returns: XGE_HAL_OK - success.
7eced415e5dd557aef2d78483b5a7785f0e13670xw * XGE_HAL_INF_MEM_STROBE_CMD_EXECUTING - Failed to set the new mac
7eced415e5dd557aef2d78483b5a7785f0e13670xw * address within the time(timeout).
7eced415e5dd557aef2d78483b5a7785f0e13670xw * XGE_HAL_ERR_OUT_OF_MAC_ADDRESSES - Invalid MAC address index.
7eced415e5dd557aef2d78483b5a7785f0e13670xw * See also: xge_hal_device_macaddr_set(), xge_hal_status_e{}.
7eced415e5dd557aef2d78483b5a7785f0e13670xwxge_hal_device_macaddr_clear(xge_hal_device_t *hldev, int index)
7eced415e5dd557aef2d78483b5a7785f0e13670xw status = xge_hal_device_macaddr_set(hldev, index, macaddr);
7eced415e5dd557aef2d78483b5a7785f0e13670xw "Not able to set the mac addr");
a23fd118e437af0a7877dd313db8fdaa3537c675yl * xge_hal_device_macaddr_find - Finds index in the rmac table.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @wanted: Wanted MAC address.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * See also: xge_hal_device_macaddr_set().
a23fd118e437af0a7877dd313db8fdaa3537c675ylxge_hal_device_macaddr_find(xge_hal_device_t *hldev, macaddr_t wanted)
a23fd118e437af0a7877dd313db8fdaa3537c675yl if (!xge_os_memcmp(macaddr, wanted, sizeof(macaddr_t))) {
a23fd118e437af0a7877dd313db8fdaa3537c675yl return -1;
a23fd118e437af0a7877dd313db8fdaa3537c675yl * xge_hal_device_mtu_set - Set MTU.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @new_mtu: New MTU size to configure.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Set new MTU value. Example, to use jumbo frames:
a23fd118e437af0a7877dd313db8fdaa3537c675yl * xge_hal_device_mtu_set(my_device, my_channel, 9600);
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Returns: XGE_HAL_OK on success.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * XGE_HAL_ERR_SWAPPER_CTRL - Failed to configure swapper control
a23fd118e437af0a7877dd313db8fdaa3537c675yl * register.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * XGE_HAL_INF_MEM_STROBE_CMD_EXECUTING - Failed to initialize TTI/RTI
a23fd118e437af0a7877dd313db8fdaa3537c675yl * schemes.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * XGE_HAL_ERR_DEVICE_IS_NOT_QUIESCENT - Failed to restore the device to
a23fd118e437af0a7877dd313db8fdaa3537c675yl * a "quiescent" state.
a23fd118e437af0a7877dd313db8fdaa3537c675ylxge_hal_device_mtu_set(xge_hal_device_t *hldev, int new_mtu)
a23fd118e437af0a7877dd313db8fdaa3537c675yl * reset needed if 1) new MTU differs, and
a23fd118e437af0a7877dd313db8fdaa3537c675yl * 2a) device was closed or
a23fd118e437af0a7877dd313db8fdaa3537c675yl * 2b) device is being upped for first time.
a23fd118e437af0a7877dd313db8fdaa3537c675yl "fatal: can not reset the device");
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* store the new MTU in device, reset will use it */
a23fd118e437af0a7877dd313db8fdaa3537c675yl * xge_hal_device_initialize - Initialize Xframe device.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @attr: pointer to xge_hal_device_attr_t structure
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @device_config: Configuration to be _applied_ to the device,
a23fd118e437af0a7877dd313db8fdaa3537c675yl * For the Xframe configuration "knobs" please
a23fd118e437af0a7877dd313db8fdaa3537c675yl * refer to xge_hal_device_config_t and Xframe
a23fd118e437af0a7877dd313db8fdaa3537c675yl * User Guide.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Initialize Xframe device. Note that all the arguments of this public API
a23fd118e437af0a7877dd313db8fdaa3537c675yl * are 'IN', including @hldev. Upper-layer driver (ULD) cooperates with
a23fd118e437af0a7877dd313db8fdaa3537c675yl * OS to find new Xframe device, locate its PCI and memory spaces.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * When done, the ULD allocates sizeof(xge_hal_device_t) bytes for HAL
a23fd118e437af0a7877dd313db8fdaa3537c675yl * to enable the latter to perform Xframe hardware initialization.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Returns: XGE_HAL_OK - success.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * XGE_HAL_ERR_DRIVER_NOT_INITIALIZED - Driver is not initialized.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * XGE_HAL_ERR_BAD_DEVICE_CONFIG - Device configuration params are not
a23fd118e437af0a7877dd313db8fdaa3537c675yl * XGE_HAL_ERR_OUT_OF_MEMORY - Memory allocation failed.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * XGE_HAL_ERR_BAD_SUBSYSTEM_ID - Device subsystem id is invalid.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * XGE_HAL_ERR_INVALID_MAC_ADDRESS - Device mac address in not valid.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * XGE_HAL_INF_MEM_STROBE_CMD_EXECUTING - Failed to retrieve the mac
a23fd118e437af0a7877dd313db8fdaa3537c675yl * address within the time(timeout) or TTI/RTI initialization failed.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * XGE_HAL_ERR_SWAPPER_CTRL - Failed to configure swapper control.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * XGE_HAL_ERR_DEVICE_IS_NOT_QUIESCENT -Device is not queiscent.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * See also: xge_hal_device_terminate(), xge_hal_status_e{}
a23fd118e437af0a7877dd313db8fdaa3537c675yl * xge_hal_device_attr_t{}.
a23fd118e437af0a7877dd313db8fdaa3537c675ylxge_hal_device_initialize(xge_hal_device_t *hldev, xge_hal_device_attr_t *attr,
8347601bcb0a439f6e50fc36b4039a73d08700e1yl xge_debug_device(XGE_TRACE, "device 0x"XGE_OS_LLXFMT" is initializing",
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* sanity check */
a23fd118e437af0a7877dd313db8fdaa3537c675yl * validate a common part of Xframe-I/II configuration
a23fd118e437af0a7877dd313db8fdaa3537c675yl * (and run check_card() later, once PCI inited - see below)
a23fd118e437af0a7877dd313db8fdaa3537c675yl status = __hal_device_config_check_common(device_config);
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* apply config */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* save original attr */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* initialize rxufca_intr_thres */
a23fd118e437af0a7877dd313db8fdaa3537c675yl hldev->rxufca_intr_thres = hldev->config.rxufca_intr_thres;
8347601bcb0a439f6e50fc36b4039a73d08700e1yl /* set initial bimodal timer for bimodal adaptive schema */
8347601bcb0a439f6e50fc36b4039a73d08700e1yl hldev->bimodal_timer_val_us = hldev->config.bimodal_timer_lo_us;
a23fd118e437af0a7877dd313db8fdaa3537c675yl hldev->queueh = xge_queue_create(hldev->pdev, hldev->irqh,
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* initialize some PCI/PCI-X fields of this PCI device. */
a23fd118e437af0a7877dd313db8fdaa3537c675yl * initlialize lists to properly handling a potential
a23fd118e437af0a7877dd313db8fdaa3537c675yl * terminate request
a23fd118e437af0a7877dd313db8fdaa3537c675yl if (xge_hal_device_check_id(hldev) == XGE_HAL_CARD_XENA) {
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* fixups for xena */
a23fd118e437af0a7877dd313db8fdaa3537c675yl } else if (xge_hal_device_check_id(hldev) == XGE_HAL_CARD_HERC) {
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* fixups for herc */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* allocate and initialize FIFO types of channels according to
a23fd118e437af0a7877dd313db8fdaa3537c675yl * configuration */
a23fd118e437af0a7877dd313db8fdaa3537c675yl for (i = 0; i < XGE_HAL_MAX_FIFO_NUM; i++) {
a23fd118e437af0a7877dd313db8fdaa3537c675yl "fifo: __hal_channel_allocate failed");
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* add new channel to the device */
a23fd118e437af0a7877dd313db8fdaa3537c675yl * automatic DRAM adjustment
a23fd118e437af0a7877dd313db8fdaa3537c675yl for (i = 0; i < XGE_HAL_MAX_RING_NUM; i++) {
a23fd118e437af0a7877dd313db8fdaa3537c675yl total_dram_size += device_config->ring.queue[i].dram_size_mb;
a23fd118e437af0a7877dd313db8fdaa3537c675yl (ring_auto_dram_cfg && left_dram_size / ring_auto_dram_cfg == 0)) {
a23fd118e437af0a7877dd313db8fdaa3537c675yl "ring config: exceeded DRAM size %d MB",
a23fd118e437af0a7877dd313db8fdaa3537c675yl * allocate and initialize RING types of channels according to
a23fd118e437af0a7877dd313db8fdaa3537c675yl * configuration
a23fd118e437af0a7877dd313db8fdaa3537c675yl for (i = 0; i < XGE_HAL_MAX_RING_NUM; i++) {
a23fd118e437af0a7877dd313db8fdaa3537c675yl "ring: __hal_channel_allocate failed");
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* add new channel to the device */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* get subsystem IDs */
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_offsetof(xge_hal_pci_config_le_t, subsystem_vendor_id),
a23fd118e437af0a7877dd313db8fdaa3537c675yl "subsystem_id %04x:%04x",
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* reset device initially */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* set host endian before, to assure proper action */
a23fd118e437af0a7877dd313db8fdaa3537c675yl "__hal_device_set_swapper failed");
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* MAC address initialization.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * For now only one mac address will be read and used. */
a23fd118e437af0a7877dd313db8fdaa3537c675yl status = xge_hal_device_macaddr_get(hldev, 0, &hldev->macaddr[0]);
a23fd118e437af0a7877dd313db8fdaa3537c675yl "xge_hal_device_macaddr_get failed");
a23fd118e437af0a7877dd313db8fdaa3537c675yl "xge_hal_device_macaddr_get returns all FFs");
a23fd118e437af0a7877dd313db8fdaa3537c675yl "default macaddr: 0x%02x-%02x-%02x-%02x-%02x-%02x",
a23fd118e437af0a7877dd313db8fdaa3537c675yl "__hal_stats_initialize failed");
a23fd118e437af0a7877dd313db8fdaa3537c675yl "__hal_device_hw_initialize failed");
8347601bcb0a439f6e50fc36b4039a73d08700e1yl hldev->dump_buf=(char*)xge_os_malloc(hldev->pdev, XGE_HAL_DUMP_BUF_SIZE);
a23fd118e437af0a7877dd313db8fdaa3537c675yl "__hal_device_hw_initialize failed");
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Xena-only: need to serialize fifo posts across all device fifos */
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_os_spin_lock_init(&hldev->xena_post_lock, hldev->pdev);
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_os_spin_lock_init_irq(&hldev->xena_post_lock, hldev->irqh);
7eced415e5dd557aef2d78483b5a7785f0e13670xw /* Getting VPD data */
a23fd118e437af0a7877dd313db8fdaa3537c675yl * xge_hal_device_terminating - Mark the device as 'terminating'.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @devh: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Mark the device as 'terminating', going to terminate. Can be used
a23fd118e437af0a7877dd313db8fdaa3537c675yl * to serialize termination with other running processes/contexts.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * See also: xge_hal_device_terminate().
7eced415e5dd557aef2d78483b5a7785f0e13670xw unsigned long flags = 0;
7eced415e5dd557aef2d78483b5a7785f0e13670xw * go through each opened tx channel and aquire
7eced415e5dd557aef2d78483b5a7785f0e13670xw * lock, so it will serialize with HAL termination flag
7eced415e5dd557aef2d78483b5a7785f0e13670xw channel = xge_container_of(item, xge_hal_channel_t, item);
a23fd118e437af0a7877dd313db8fdaa3537c675yl * xge_hal_device_terminate - Terminate Xframe device.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Terminate HAL device.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * See also: xge_hal_device_initialize().
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_os_spin_lock_destroy(&hldev->xena_post_lock, hldev->pdev);
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_os_spin_lock_destroy_irq(&hldev->xena_post_lock, hldev->pdev);
8347601bcb0a439f6e50fc36b4039a73d08700e1yl xge_debug_device(XGE_TRACE, "device "XGE_OS_LLXFMT" is terminating",
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* close if open and free all channels */
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_os_spin_lock_destroy(&hldev->spdm_lock, hldev->pdev);
7eced415e5dd557aef2d78483b5a7785f0e13670xw pcisize = (xge_hal_device_check_id(hldev) == XGE_HAL_CARD_HERC)?
7eced415e5dd557aef2d78483b5a7785f0e13670xw for (j = 0; j < pcisize; j++) {
7eced415e5dd557aef2d78483b5a7785f0e13670xw * __hal_device_get_vpd_data - Getting vpd_data.
7eced415e5dd557aef2d78483b5a7785f0e13670xw * @hldev: HAL device handle.
7eced415e5dd557aef2d78483b5a7785f0e13670xw * Getting product name and serial number from vpd capabilites structure
7eced415e5dd557aef2d78483b5a7785f0e13670xw "10 Gigabit Ethernet Adapter",
7eced415e5dd557aef2d78483b5a7785f0e13670xw "not available",
7eced415e5dd557aef2d78483b5a7785f0e13670xw vpd_data = ( u8*) xge_os_malloc(hldev->pdev, XGE_HAL_VPD_BUFFER_SIZE + 16);
7eced415e5dd557aef2d78483b5a7785f0e13670xw if ( vpd_data == 0 )
7eced415e5dd557aef2d78483b5a7785f0e13670xw for (index = 0; index < XGE_HAL_VPD_BUFFER_SIZE; index +=4 ) {
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_os_pci_write8(hldev->pdev, hldev->cfgh, (vpd_addr + 2), (u8)index);
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_os_pci_read8(hldev->pdev, hldev->cfgh,(vpd_addr + 2), &data);
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_os_pci_write8(hldev->pdev, hldev->cfgh, (vpd_addr + 3), 0);
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_os_pci_read8(hldev->pdev, hldev->cfgh,(vpd_addr + 3), &data);
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_os_pci_read32(hldev->pdev, hldev->cfgh,(vpd_addr + 4),
7eced415e5dd557aef2d78483b5a7785f0e13670xw /* read serial number of adapter */
7eced415e5dd557aef2d78483b5a7785f0e13670xw for (count = 0; count < XGE_HAL_VPD_BUFFER_SIZE; count++) {
7eced415e5dd557aef2d78483b5a7785f0e13670xw (void) memset(hldev->vpd_data.serial_num, 0, XGE_HAL_VPD_LENGTH);
7eced415e5dd557aef2d78483b5a7785f0e13670xw (void) memcpy(hldev->vpd_data.serial_num, &vpd_data[count + 3],
7eced415e5dd557aef2d78483b5a7785f0e13670xw (void) memset(hldev->vpd_data.product_name, 0, vpd_data[1]);
7eced415e5dd557aef2d78483b5a7785f0e13670xw (void) memcpy(hldev->vpd_data.product_name, &vpd_data[3], vpd_data[1]);
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_os_free(hldev->pdev, vpd_data, XGE_HAL_VPD_BUFFER_SIZE + 16);
a23fd118e437af0a7877dd313db8fdaa3537c675yl * xge_hal_device_handle_tcode - Handle transfer code.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @channelh: Channel handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @dtrh: Descriptor handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @t_code: One of the enumerated (and documented in the Xframe user guide)
a23fd118e437af0a7877dd313db8fdaa3537c675yl * "transfer codes".
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Handle descriptor's transfer code. The latter comes with each completed
a23fd118e437af0a7877dd313db8fdaa3537c675yl * descriptor, see xge_hal_fifo_dtr_next_completed() and
a23fd118e437af0a7877dd313db8fdaa3537c675yl * xge_hal_ring_dtr_next_completed().
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Transfer codes are enumerated in xgehal-fifo.h and xgehal-ring.h.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Returns: one of the xge_hal_status_e{} enumerated types.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * XGE_HAL_OK - for success.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * XGE_HAL_ERR_CRITICAL - when encounters critical error.
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_hal_channel_t *channel = (xge_hal_channel_t *)channelh;
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_hal_device_t *hldev = (xge_hal_device_t *)channel->devh;
a23fd118e437af0a7877dd313db8fdaa3537c675yl hldev->stats.sw_dev_err_stats.txd_t_code_err_cnt[t_code]++;
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* handle link "down" immediately without going through
a23fd118e437af0a7877dd313db8fdaa3537c675yl * xge_hal_device_poll() routine. */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* link is down */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* turn off LED */
a23fd118e437af0a7877dd313db8fdaa3537c675yl hldev->stats.sw_dev_err_stats.rxd_t_code_err_cnt[t_code]++;
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_hal_ring_rxd_1_t *rxdp = (xge_hal_ring_rxd_1_t *)dtrh;
8347601bcb0a439f6e50fc36b4039a73d08700e1yl xge_os_printf(""XGE_OS_LLXFMT":"XGE_OS_LLXFMT":"XGE_OS_LLXFMT
7eced415e5dd557aef2d78483b5a7785f0e13670xw /* do not drop if detected unknown IPv6 extension */
a23fd118e437af0a7877dd313db8fdaa3537c675yl * xge_hal_device_link_state - Get link state.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @devh: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @ls: Link state, see xge_hal_device_link_state_e{}.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Get link state.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Returns: XGE_HAL_OK.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * See also: xge_hal_device_link_state_e{}.
a23fd118e437af0a7877dd313db8fdaa3537c675ylxge_hal_status_e xge_hal_device_link_state(xge_hal_device_h devh,
a23fd118e437af0a7877dd313db8fdaa3537c675yl * xge_hal_device_sched_timer - Configure scheduled device interrupt.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @devh: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @interval_us: Time interval, in miscoseconds.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Unlike transmit and receive interrupts,
a23fd118e437af0a7877dd313db8fdaa3537c675yl * the scheduled interrupt is generated independently of
a23fd118e437af0a7877dd313db8fdaa3537c675yl * traffic, but purely based on time.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @one_shot: 1 - generate scheduled interrupt only once.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * 0 - generate scheduled interrupt periodically at the specified
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @interval_us interval.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * (Re-)configure scheduled interrupt. Can be called at runtime to change
a23fd118e437af0a7877dd313db8fdaa3537c675yl * the setting, generate one-shot interrupts based on the resource and/or
a23fd118e437af0a7877dd313db8fdaa3537c675yl * traffic conditions, other purposes.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * See also: xge_hal_device_config_t{}.
a23fd118e437af0a7877dd313db8fdaa3537c675ylvoid xge_hal_device_sched_timer(xge_hal_device_h devh, int interval_us,
a23fd118e437af0a7877dd313db8fdaa3537c675yl unsigned int interval = hldev->config.pci_freq_mherz * interval_us;
8347601bcb0a439f6e50fc36b4039a73d08700e1yl xge_debug_device(XGE_TRACE, "sched_timer 0x"XGE_OS_LLXFMT": %s",
a23fd118e437af0a7877dd313db8fdaa3537c675yl (unsigned long long)val64,
a23fd118e437af0a7877dd313db8fdaa3537c675yl * xge_hal_device_check_id - Verify device ID.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @devh: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Verify device ID.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Returns: one of the xge_hal_card_e{} enumerated types.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * See also: xge_hal_card_e{}.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * xge_hal_device_pci_info_get - Get PCI bus informations such as width,
a23fd118e437af0a7877dd313db8fdaa3537c675yl * frequency, and mode from previously stored values.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @devh: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @pci_mode: pointer to a variable of enumerated type
a23fd118e437af0a7877dd313db8fdaa3537c675yl * xge_hal_pci_mode_e{}.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @bus_frequency: pointer to a variable of enumerated type
a23fd118e437af0a7877dd313db8fdaa3537c675yl * xge_hal_pci_bus_frequency_e{}.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @bus_width: pointer to a variable of enumerated type
a23fd118e437af0a7877dd313db8fdaa3537c675yl * xge_hal_pci_bus_width_e{}.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Get pci mode, frequency, and PCI bus width.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Returns: one of the xge_hal_status_e{} enumerated types.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * XGE_HAL_OK - for success.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * XGE_HAL_ERR_INVALID_DEVICE - for invalid device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * See Also: xge_hal_pci_mode_e, xge_hal_pci_mode_e, xge_hal_pci_width_e.
a23fd118e437af0a7877dd313db8fdaa3537c675ylxge_hal_device_pci_info_get(xge_hal_device_h devh, xge_hal_pci_mode_e *pci_mode,
a23fd118e437af0a7877dd313db8fdaa3537c675yl if (!hldev || !hldev->is_initialized || hldev->magic != XGE_HAL_MAGIC) {
a23fd118e437af0a7877dd313db8fdaa3537c675yl "xge_hal_device_pci_info_get error, rc %d for device %p",
a23fd118e437af0a7877dd313db8fdaa3537c675yl * xge_hal_reinitialize_hw
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: private member of the device structure.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * This function will soft reset the NIC and re-initalize all the
a23fd118e437af0a7877dd313db8fdaa3537c675yl * I/O registers to the values they had after it's inital initialization
a23fd118e437af0a7877dd313db8fdaa3537c675yl * through the probe function.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * __hal_read_spdm_entry_line
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: pointer to xge_hal_device_t structure
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @spdm_line: spdm line in the spdm entry to be read.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @spdm_entry: spdm entry of the spdm_line in the SPDM table.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @spdm_line_val: Contains the value stored in the spdm line.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * SPDM table contains upto a maximum of 256 spdm entries.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Each spdm entry contains 8 lines and each line stores 8 bytes.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * This function reads the spdm line(addressed by @spdm_line)
a23fd118e437af0a7877dd313db8fdaa3537c675yl * of the spdm entry(addressed by @spdm_entry) in
a23fd118e437af0a7877dd313db8fdaa3537c675yl * the SPDM table.
a23fd118e437af0a7877dd313db8fdaa3537c675yl__hal_read_spdm_entry_line(xge_hal_device_t *hldev, u8 spdm_line,
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_hal_pci_bar0_t *bar0 = (xge_hal_pci_bar0_t *)(void *)hldev->bar0;
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* poll until done */
a23fd118e437af0a7877dd313db8fdaa3537c675yl * __hal_get_free_spdm_entry
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: pointer to xge_hal_device_t structure
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @spdm_entry: Contains an index to the unused spdm entry in the SPDM table.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * This function returns an index of unused spdm entry in the SPDM
a23fd118e437af0a7877dd313db8fdaa3537c675yl__hal_get_free_spdm_entry(xge_hal_device_t *hldev, u16 *spdm_entry)
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Search in the local SPDM table for a free slot.
a23fd118e437af0a7877dd313db8fdaa3537c675yl for(; *spdm_entry < hldev->spdm_max_entries; (*spdm_entry)++) {
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Make sure that the corresponding spdm entry in the SPDM
a23fd118e437af0a7877dd313db8fdaa3537c675yl * table is free.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Seventh line of the spdm entry contains information about
a23fd118e437af0a7877dd313db8fdaa3537c675yl * whether the entry is free or not.
a23fd118e437af0a7877dd313db8fdaa3537c675yl if ((status = __hal_read_spdm_entry_line(hldev, 7, *spdm_entry,
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* BIT(63) in spdm_line 7 corresponds to entry_enable bit */
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Log a warning
a23fd118e437af0a7877dd313db8fdaa3537c675yl "consistent with the actual one for the spdm "
7eced415e5dd557aef2d78483b5a7785f0e13670xw * __hal_calc_jhash - Calculate Jenkins hash.
7eced415e5dd557aef2d78483b5a7785f0e13670xw * @msg: Jenkins hash algorithm key.
7eced415e5dd557aef2d78483b5a7785f0e13670xw * @length: Length of the key.
7eced415e5dd557aef2d78483b5a7785f0e13670xw * @golden_ratio: Jenkins hash golden ratio.
7eced415e5dd557aef2d78483b5a7785f0e13670xw * @init_value: Jenkins hash initial value.
7eced415e5dd557aef2d78483b5a7785f0e13670xw * This function implements the Jenkins based algorithm used for the
7eced415e5dd557aef2d78483b5a7785f0e13670xw * calculation of the RTH hash.
7eced415e5dd557aef2d78483b5a7785f0e13670xw * Returns: Jenkins hash value.
7eced415e5dd557aef2d78483b5a7785f0e13670xw__hal_calc_jhash(u8 *msg, u32 length, u32 golden_ratio, u32 init_value)
7eced415e5dd557aef2d78483b5a7785f0e13670xw * Set up the internal state
7eced415e5dd557aef2d78483b5a7785f0e13670xw a = b = golden_ratio; /* the golden ratio; an arbitrary value */
7eced415e5dd557aef2d78483b5a7785f0e13670xw /* handle most of the key */
7eced415e5dd557aef2d78483b5a7785f0e13670xw /* handle the last 11 bytes */
7eced415e5dd557aef2d78483b5a7785f0e13670xw /* the first byte of c is reserved for the length */
7eced415e5dd557aef2d78483b5a7785f0e13670xw /* case 0: nothing left to add */
7eced415e5dd557aef2d78483b5a7785f0e13670xw /* report the result */
a23fd118e437af0a7877dd313db8fdaa3537c675yl * xge_hal_spdm_entry_add - Add a new entry to the SPDM table.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @devh: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @src_ip: Source ip address(IPv4/IPv6).
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @dst_ip: Destination ip address(IPv4/IPv6).
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @l4_sp: L4 source port.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @l4_dp: L4 destination port.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @is_tcp: Set to 1, if the protocol is TCP.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * 0, if the protocol is UDP.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @is_ipv4: Set to 1, if the protocol is IPv4.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * 0, if the protocol is IPv6.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @tgt_queue: Target queue to route the receive packet.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * This function add a new entry to the SPDM table.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Returns: XGE_HAL_OK - success.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * XGE_HAL_ERR_SPDM_NOT_ENABLED - SPDM support is not enabled.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * XGE_HAL_INF_MEM_STROBE_CMD_EXECUTING - Failed to add a new entry with in
a23fd118e437af0a7877dd313db8fdaa3537c675yl * the time(timeout).
a23fd118e437af0a7877dd313db8fdaa3537c675yl * XGE_HAL_ERR_SPDM_TABLE_FULL - SPDM table is full.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * XGE_HAL_ERR_SPDM_INVALID_ENTRY - Invalid SPDM entry.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * See also: xge_hal_spdm_entry_remove{}.
a23fd118e437af0a7877dd313db8fdaa3537c675ylxge_hal_spdm_entry_add(xge_hal_device_h devh, xge_hal_ipaddr_t *src_ip,
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_hal_pci_bar0_t *bar0 = (xge_hal_pci_bar0_t *)(void *)hldev->bar0;
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Calculate the jenkins hash.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Create the Jenkins hash algorithm key.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * key = {L3SA, L3DA, L4SP, L4DP}, if SPDM is configured to
a23fd118e437af0a7877dd313db8fdaa3537c675yl * use L4 information. Otherwize key = {L3SA, L3DA}.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Jenkins hash algorithm expects the key in the big endian
a23fd118e437af0a7877dd313db8fdaa3537c675yl * format. Since key is the byte array, memcpy won't work in the
a23fd118e437af0a7877dd313db8fdaa3537c675yl * case of little endian. So, the current code extracts each
a23fd118e437af0a7877dd313db8fdaa3537c675yl * byte starting from MSB and store it in the key.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Calculate jenkins hash for this configuration
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Locate a free slot in the SPDM table. To avoid a seach in the
a23fd118e437af0a7877dd313db8fdaa3537c675yl * actual SPDM table, which is very expensive in terms of time,
a23fd118e437af0a7877dd313db8fdaa3537c675yl * we are maintaining a local copy of the table and the search for
a23fd118e437af0a7877dd313db8fdaa3537c675yl * the free entry is performed in the local table.
a23fd118e437af0a7877dd313db8fdaa3537c675yl if ((status = __hal_get_free_spdm_entry(hldev,&spdm_entry))
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Add this entry to the SPDM table
a23fd118e437af0a7877dd313db8fdaa3537c675yl status = __hal_spdm_entry_add(hldev, src_ip, dst_ip, l4_sp, l4_dp,
a23fd118e437af0a7877dd313db8fdaa3537c675yl * xge_hal_spdm_entry_remove - Remove an entry from the SPDM table.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @devh: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @src_ip: Source ip address(IPv4/IPv6).
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @dst_ip: Destination ip address(IPv4/IPv6).
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @l4_sp: L4 source port.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @l4_dp: L4 destination port.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @is_tcp: Set to 1, if the protocol is TCP.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * 0, if the protocol os UDP.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @is_ipv4: Set to 1, if the protocol is IPv4.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * 0, if the protocol is IPv6.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * This function remove an entry from the SPDM table.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Returns: XGE_HAL_OK - success.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * XGE_HAL_ERR_SPDM_NOT_ENABLED - SPDM support is not enabled.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * XGE_HAL_INF_MEM_STROBE_CMD_EXECUTING - Failed to remove an entry with in
a23fd118e437af0a7877dd313db8fdaa3537c675yl * the time(timeout).
a23fd118e437af0a7877dd313db8fdaa3537c675yl * XGE_HAL_ERR_SPDM_ENTRY_NOT_FOUND - Unable to locate the entry in the SPDM
a23fd118e437af0a7877dd313db8fdaa3537c675yl * See also: xge_hal_spdm_entry_add{}.
a23fd118e437af0a7877dd313db8fdaa3537c675ylxge_hal_spdm_entry_remove(xge_hal_device_h devh, xge_hal_ipaddr_t *src_ip,
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_hal_pci_bar0_t *bar0 = (xge_hal_pci_bar0_t *)(void *)hldev->bar0;
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Poll the rxpic_int_reg register until spdm ready bit is set or
a23fd118e437af0a7877dd313db8fdaa3537c675yl * timeout happens.
a23fd118e437af0a7877dd313db8fdaa3537c675yl if (__hal_device_register_poll(hldev, &bar0->rxpic_int_reg, 1,
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* upper layer may require to repeat */
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Clear the SPDM READY bit.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Search in the local SPDM table to get the index of the
a23fd118e437af0a7877dd313db8fdaa3537c675yl * corresponding entry in the SPDM table.
a23fd118e437af0a7877dd313db8fdaa3537c675yl for (;spdm_entry < hldev->spdm_max_entries; spdm_entry++) {
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Compare the src/dst IP addresses of source and target
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Retrieve the corresponding entry from the SPDM table and
a23fd118e437af0a7877dd313db8fdaa3537c675yl * make sure that the data is consistent.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * SPDM line 2,3,4 are valid only for IPv6 entry.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * SPDM line 5 & 6 are reserved. We don't have to
a23fd118e437af0a7877dd313db8fdaa3537c675yl * read these entries in the above cases.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Seventh line of the spdm entry contains the entry_enable
a23fd118e437af0a7877dd313db8fdaa3537c675yl * bit. Make sure that the entry_enable bit of this spdm entry
a23fd118e437af0a7877dd313db8fdaa3537c675yl * To remove an entry from the SPDM table, reset this
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Log a warning
a23fd118e437af0a7877dd313db8fdaa3537c675yl "consistent with the actual one for the spdm "
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Retreive the L4 SP/DP, src/dst ip addresses from the SPDM
a23fd118e437af0a7877dd313db8fdaa3537c675yl * table and do a comparision.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Log a warning
a23fd118e437af0a7877dd313db8fdaa3537c675yl "consistent with the actual one for the spdm "
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Upper 32 bits of spdm_line(64 bit) contains the
a23fd118e437af0a7877dd313db8fdaa3537c675yl * src IPv4 address. Lower 32 bits of spdm_line
a23fd118e437af0a7877dd313db8fdaa3537c675yl * contains the destination IPv4 address.
a23fd118e437af0a7877dd313db8fdaa3537c675yl "consistent with the actual one for the spdm "
a23fd118e437af0a7877dd313db8fdaa3537c675yl * SPDM line 1 & 2 contains the src IPv6 address.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * SPDM line 3 & 4 contains the dst IPv6 address.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Log a warning
a23fd118e437af0a7877dd313db8fdaa3537c675yl "consistent with the actual one for the spdm "
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Reset the entry_enable bit to zero
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Wait for the operation to be completed.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Make the corresponding spdm entry in the local SPDM table
a23fd118e437af0a7877dd313db8fdaa3537c675yl * available for future use.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * __hal_device_rti_set
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @ring: The post_qid of the ring.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @channel: HAL channel of the ring.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * This function stores the RTI value associated for the MSI and
a23fd118e437af0a7877dd313db8fdaa3537c675yl * also unmasks this particular RTI in the rti_mask register.
a23fd118e437af0a7877dd313db8fdaa3537c675ylstatic void __hal_device_rti_set(int ring_qid, xge_hal_channel_t *channel)
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_hal_device_t *hldev = (xge_hal_device_t*)channel->devh;
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_hal_pci_bar0_t *bar0 = (xge_hal_pci_bar0_t *)hldev->bar0;
a23fd118e437af0a7877dd313db8fdaa3537c675yl * __hal_device_tti_set
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @ring: The post_qid of the FIFO.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @channel: HAL channel the FIFO.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * This function stores the TTI value associated for the MSI and
a23fd118e437af0a7877dd313db8fdaa3537c675yl * also unmasks this particular TTI in the tti_mask register.
a23fd118e437af0a7877dd313db8fdaa3537c675ylstatic void __hal_device_tti_set(int fifo_qid, xge_hal_channel_t *channel)
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_hal_device_t *hldev = (xge_hal_device_t*)channel->devh;
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_hal_pci_bar0_t *bar0 = (xge_hal_pci_bar0_t *)hldev->bar0;
a23fd118e437af0a7877dd313db8fdaa3537c675yl * xge_hal_channel_msi_set - Associate a RTI with a ring or TTI with a
a23fd118e437af0a7877dd313db8fdaa3537c675yl * FIFO for a given MSI.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @channelh: HAL channel handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @msi: MSI Number associated with the channel.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @msi_msg: The MSI message associated with the MSI number above.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * This API will associate a given channel (either Ring or FIFO) with the
a23fd118e437af0a7877dd313db8fdaa3537c675yl * given MSI number. It will alo program the Tx_Mat/Rx_Mat tables in the
a23fd118e437af0a7877dd313db8fdaa3537c675yl * hardware to indicate this association to the hardware.
a23fd118e437af0a7877dd313db8fdaa3537c675ylxge_hal_channel_msi_set(xge_hal_channel_h channelh, int msi, u32 msi_msg)
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_hal_channel_t *channel = (xge_hal_channel_t *)channelh;
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_hal_device_t *hldev = (xge_hal_device_t*)channel->devh;
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_hal_pci_bar0_t *bar0 = (xge_hal_pci_bar0_t *)hldev->bar0;
7eced415e5dd557aef2d78483b5a7785f0e13670xw * xge_hal_mask_msix - Begin IRQ processing.
7eced415e5dd557aef2d78483b5a7785f0e13670xw * @hldev: HAL device handle.
7eced415e5dd557aef2d78483b5a7785f0e13670xw * @msi_id: MSI ID
7eced415e5dd557aef2d78483b5a7785f0e13670xw * The function masks the msix interrupt for the given msi_id
7eced415e5dd557aef2d78483b5a7785f0e13670xw * Returns: 0,
7eced415e5dd557aef2d78483b5a7785f0e13670xw * Otherwise, XGE_HAL_ERR_WRONG_IRQ if the msix index is out of range
7eced415e5dd557aef2d78483b5a7785f0e13670xw * See also:
7eced415e5dd557aef2d78483b5a7785f0e13670xw val32 = xge_os_pio_mem_read32(hldev->pdev, hldev->regh2, &bar2[msi_id*4+3]);
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_os_pio_mem_write32(hldev->pdev, hldev->regh2, val32, &bar2[msi_id*4+3]);
7eced415e5dd557aef2d78483b5a7785f0e13670xw * xge_hal_mask_msix - Begin IRQ processing.
7eced415e5dd557aef2d78483b5a7785f0e13670xw * @hldev: HAL device handle.
7eced415e5dd557aef2d78483b5a7785f0e13670xw * @msi_id: MSI ID
7eced415e5dd557aef2d78483b5a7785f0e13670xw * The function masks the msix interrupt for the given msi_id
7eced415e5dd557aef2d78483b5a7785f0e13670xw * Returns: 0,
7eced415e5dd557aef2d78483b5a7785f0e13670xw * Otherwise, XGE_HAL_ERR_WRONG_IRQ if the msix index is out of range
7eced415e5dd557aef2d78483b5a7785f0e13670xw * See also:
7eced415e5dd557aef2d78483b5a7785f0e13670xw val32 = xge_os_pio_mem_read32(hldev->pdev, hldev->regh2, &bar2[msi_id*4+3]);
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_os_pio_mem_write32(hldev->pdev, hldev->regh2, val32, &bar2[msi_id*4+3]);
7eced415e5dd557aef2d78483b5a7785f0e13670xw * __hal_set_msix_vals
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @devh: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @msix_value: 32bit MSI-X value transferred across PCI to @msix_address.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Filled in by this function.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @msix_address: 32bit MSI-X DMA address.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Filled in by this function.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @msix_idx: index that corresponds to the (@msix_value, @msix_address)
a23fd118e437af0a7877dd313db8fdaa3537c675yl * entry in the table of MSI-X (value, address) pairs.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * This function will program the hardware associating the given
a23fd118e437af0a7877dd313db8fdaa3537c675yl * address/value cobination to the specified msi number.
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_hal_pci_bar0_t *bar0 = (xge_hal_pci_bar0_t *)hldev->bar0;
a23fd118e437af0a7877dd313db8fdaa3537c675yl *msix_value = (u32)(xge_os_pio_mem_read64(hldev->pdev, hldev->regh0,
a23fd118e437af0a7877dd313db8fdaa3537c675yl *msix_addr = xge_os_pio_mem_read64(hldev->pdev, hldev->regh0,
a23fd118e437af0a7877dd313db8fdaa3537c675yl * xge_hal_channel_msix_set - Associate MSI-X with a channel.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @channelh: HAL channel handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @msix_idx: index that corresponds to a particular (@msix_value,
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @msix_address) entry in the MSI-X table.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * This API associates a given channel (either Ring or FIFO) with the
a23fd118e437af0a7877dd313db8fdaa3537c675yl * given MSI-X number. It programs the Xframe's Tx_Mat/Rx_Mat tables
a23fd118e437af0a7877dd313db8fdaa3537c675yl * to indicate this association.
a23fd118e437af0a7877dd313db8fdaa3537c675ylxge_hal_channel_msix_set(xge_hal_channel_h channelh, int msix_idx)
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_hal_channel_t *channel = (xge_hal_channel_t *)channelh;
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_hal_device_t *hldev = (xge_hal_device_t*)channel->devh;
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_hal_pci_bar0_t *bar0 = (xge_hal_pci_bar0_t *)hldev->bar0;
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Currently Ring and RTI is one on one. */
7eced415e5dd557aef2d78483b5a7785f0e13670xw hldev->config.ring.queue[channel->post_qid].intr_vector =
7eced415e5dd557aef2d78483b5a7785f0e13670xw hldev->config.fifo.queue[channel->post_qid].intr_vector =
a23fd118e437af0a7877dd313db8fdaa3537c675yl * xge_hal_lro_terminate - Terminate lro resources.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @lro_scale: Amount of lro memory.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: Hal device structure.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * xge_hal_lro_init - Initiate lro resources.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @lro_scale: Amount of lro memory.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: Hal device structure.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Note: For time being I am using only one LRO per device. Later on size
a23fd118e437af0a7877dd313db8fdaa3537c675yl * will be increased.
8347601bcb0a439f6e50fc36b4039a73d08700e1yl if (hldev->config.lro_sg_size == XGE_HAL_DEFAULT_USE_HARDCODE)
8347601bcb0a439f6e50fc36b4039a73d08700e1yl if (hldev->config.lro_frm_len == XGE_HAL_DEFAULT_USE_HARDCODE)
7eced415e5dd557aef2d78483b5a7785f0e13670xw for (i=0; i < XGE_HAL_MAX_RING_NUM; i++)
a23fd118e437af0a7877dd313db8fdaa3537c675yl * xge_hal_device_poll - HAL device "polling" entry point.
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * @devh: HAL device.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * HAL "polling" entry point. Note that this is part of HAL public API.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Upper-Layer driver _must_ periodically poll HAL via
a23fd118e437af0a7877dd313db8fdaa3537c675yl * xge_hal_device_poll().
a23fd118e437af0a7877dd313db8fdaa3537c675yl * HAL uses caller's execution context to serially process accumulated
a23fd118e437af0a7877dd313db8fdaa3537c675yl * slow-path events, such as link state changes and hardware error
a23fd118e437af0a7877dd313db8fdaa3537c675yl * indications.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * The rate of polling could be somewhere between 500us to 10ms,
a23fd118e437af0a7877dd313db8fdaa3537c675yl * depending on requirements (e.g., the requirement to support fail-over
a23fd118e437af0a7877dd313db8fdaa3537c675yl * could mean that 500us or even 100us polling interval need to be used).
a23fd118e437af0a7877dd313db8fdaa3537c675yl * The need and motivation for external polling includes
a23fd118e437af0a7877dd313db8fdaa3537c675yl * - remove the error-checking "burden" from the HAL interrupt handler
a23fd118e437af0a7877dd313db8fdaa3537c675yl * (see xge_hal_device_handle_irq());
a23fd118e437af0a7877dd313db8fdaa3537c675yl * - remove the potential source of portability issues by _not_
a23fd118e437af0a7877dd313db8fdaa3537c675yl * implementing separate polling thread within HAL itself.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * See also: xge_hal_event_e{}, xge_hal_driver_config_t{}.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Usage: See ex_slow_path{}.
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_queue_item_t *item = (xge_queue_item_t *)(void *)item_buf;
a23fd118e437af0a7877dd313db8fdaa3537c675yl int i = 0;
8347601bcb0a439f6e50fc36b4039a73d08700e1yl if(hldev->stats.sw_dev_err_stats.xpak_counter.tick_period < 72000)
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * Wait for an Hour
8347601bcb0a439f6e50fc36b4039a73d08700e1yl hldev->stats.sw_dev_err_stats.xpak_counter.tick_period++;
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * Logging Error messages in the excess temperature,
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * Bias current, laser ouput for three cycle
8347601bcb0a439f6e50fc36b4039a73d08700e1yl hldev->stats.sw_dev_err_stats.xpak_counter.tick_period = 0;
a23fd118e437af0a7877dd313db8fdaa3537c675yl while (i++ < XGE_HAL_DRIVER_QUEUE_CONSUME_MAX || queue_has_critical_event) {
8347601bcb0a439f6e50fc36b4039a73d08700e1yl XGE_OS_LLXFMT, (u64)(ulong_t)hldev->queueh, item->event_type,
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* handle one critical event per poll cycle */
a23fd118e437af0a7877dd313db8fdaa3537c675yl default: {
a23fd118e437af0a7877dd313db8fdaa3537c675yl "got non-HAL event %d",
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* broadcast this event */
a23fd118e437af0a7877dd313db8fdaa3537c675yl if (g_xge_hal_driver->uld_callbacks.before_device_poll) {
a23fd118e437af0a7877dd313db8fdaa3537c675yl g_xge_hal_driver->uld_callbacks.after_device_poll(hldev);
a23fd118e437af0a7877dd313db8fdaa3537c675yl * handle critical error right away:
a23fd118e437af0a7877dd313db8fdaa3537c675yl * - walk the device queue again
a23fd118e437af0a7877dd313db8fdaa3537c675yl * - drop non-critical events, if any
a23fd118e437af0a7877dd313db8fdaa3537c675yl * - look for the 1st critical
a23fd118e437af0a7877dd313db8fdaa3537c675yl * xge_hal_rts_rth_init - Set enhanced mode for RTS hashing.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * This function is used to set the adapter to enhanced mode.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * See also: xge_hal_rts_rth_clr(), xge_hal_rts_rth_set().
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_hal_pci_bar0_t *bar0 = (xge_hal_pci_bar0_t *)(void *)hldev->bar0;
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Set the receive traffic steering mode from default(classic)
a23fd118e437af0a7877dd313db8fdaa3537c675yl * to enhanced.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * xge_hal_rts_rth_clr - Clear RTS hashing.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * This function is used to clear all RTS hashing related stuff.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * It brings the adapter out from enhanced mode to classic mode.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * It also clears RTS_RTH_CFG register i.e clears hash type, function etc.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * See also: xge_hal_rts_rth_set(), xge_hal_rts_rth_itable_set().
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_hal_pci_bar0_t *bar0 = (xge_hal_pci_bar0_t *)(void *)hldev->bar0;
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Set the receive traffic steering mode from default(classic)
a23fd118e437af0a7877dd313db8fdaa3537c675yl * to enhanced.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * xge_hal_rts_rth_set - Set/configure RTS hashing.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @def_q: default queue
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hash_type: hash type i.e TcpIpV4, TcpIpV6 etc.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @bucket_size: no of least significant bits to be used for hashing.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Used to set/configure all RTS hashing related stuff.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * - set the steering mode to enhanced.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * - set hash function i.e algo selection.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * - set the default queue.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * See also: xge_hal_rts_rth_clr(), xge_hal_rts_rth_itable_set().
a23fd118e437af0a7877dd313db8fdaa3537c675ylxge_hal_rts_rth_set(xge_hal_device_t *hldev, u8 def_q, u64 hash_type,
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_hal_pci_bar0_t *bar0 = (xge_hal_pci_bar0_t *)(void *)hldev->bar0;
a23fd118e437af0a7877dd313db8fdaa3537c675yl * xge_hal_rts_rth_start - Start RTS hashing.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Used to Start RTS hashing .
a23fd118e437af0a7877dd313db8fdaa3537c675yl * See also: xge_hal_rts_rth_clr(), xge_hal_rts_rth_itable_set(), xge_hal_rts_rth_start.
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_hal_pci_bar0_t *bar0 = (xge_hal_pci_bar0_t *)(void *)hldev->bar0;
a23fd118e437af0a7877dd313db8fdaa3537c675yl * xge_hal_rts_rth_stop - Stop the RTS hashing.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Used to Staop RTS hashing .
a23fd118e437af0a7877dd313db8fdaa3537c675yl * See also: xge_hal_rts_rth_clr(), xge_hal_rts_rth_itable_set(), xge_hal_rts_rth_start.
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_hal_pci_bar0_t *bar0 = (xge_hal_pci_bar0_t *)(void *)hldev->bar0;
a23fd118e437af0a7877dd313db8fdaa3537c675yl * xge_hal_rts_rth_itable_set - Set/configure indirection table (IT).
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @itable: Pointer to the indirection table
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @itable_size: no of least significant bits to be used for hashing
a23fd118e437af0a7877dd313db8fdaa3537c675yl * Used to set/configure indirection table.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * It enables the required no of entries in the IT.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * It adds entries to the IT.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * See also: xge_hal_rts_rth_clr(), xge_hal_rts_rth_set().
a23fd118e437af0a7877dd313db8fdaa3537c675ylxge_hal_rts_rth_itable_set(xge_hal_device_t *hldev, u8 *itable, u32 itable_size)
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_hal_pci_bar0_t *bar0 = (xge_hal_pci_bar0_t *)(void *)hldev->bar0;
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* execute */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* poll until done */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* upper layer may require to repeat */
a23fd118e437af0a7877dd313db8fdaa3537c675yl * xge_hal_device_rts_rth_key_set - Configure 40byte secret for hash calc.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @hldev: HAL device handle.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @KeySize: Number of 64-bit words
a23fd118e437af0a7877dd313db8fdaa3537c675yl * @Key: upto 40-byte array of 8-bit values
a23fd118e437af0a7877dd313db8fdaa3537c675yl * This function configures the 40-byte secret which is used for hash
a23fd118e437af0a7877dd313db8fdaa3537c675yl * calculation.
a23fd118e437af0a7877dd313db8fdaa3537c675yl * See also: xge_hal_rts_rth_clr(), xge_hal_rts_rth_set().
a23fd118e437af0a7877dd313db8fdaa3537c675ylxge_hal_device_rts_rth_key_set(xge_hal_device_t *hldev, u8 KeySize, u8 *Key)
a23fd118e437af0a7877dd313db8fdaa3537c675yl xge_hal_pci_bar0_t *bar0 = (xge_hal_pci_bar0_t *)(void *) hldev->bar0;
a23fd118e437af0a7877dd313db8fdaa3537c675yl for ( i = 0; i < 8 ; i++) {
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Prepare 64-bit word for 'nreg' containing 8 keys. */
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* temp64 = XGE_HAL_RTH_HASH_MASK_n(val64, (n<<3), (n<<3)+7);*/
a23fd118e437af0a7877dd313db8fdaa3537c675yl /* Clear the rest if key is less than 40 bytes */
a23fd118e437af0a7877dd313db8fdaa3537c675yl * xge_hal_device_is_closed - Device is closed
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * @devh: HAL device handle.
8347601bcb0a439f6e50fc36b4039a73d08700e1ylxge_hal_device_rts_section_enable(xge_hal_device_h devh, int index)
8347601bcb0a439f6e50fc36b4039a73d08700e1yl xge_hal_pci_bar0_t *bar0 = (xge_hal_pci_bar0_t *)(void *)hldev->bar0;
8347601bcb0a439f6e50fc36b4039a73d08700e1yl * Calculate the section value
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_debug_device(XGE_TRACE, "the Section value is %d ", section);
7eced415e5dd557aef2d78483b5a7785f0e13670xw * xge_hal_fix_rldram_ecc_error
7eced415e5dd557aef2d78483b5a7785f0e13670xw * @hldev: private member of the device structure.
7eced415e5dd557aef2d78483b5a7785f0e13670xw * SXE-02-010. This function will turn OFF the ECC error reporting for the
7eced415e5dd557aef2d78483b5a7785f0e13670xw * interface bet'n external Micron RLDRAM II device and memory controller.
7eced415e5dd557aef2d78483b5a7785f0e13670xw * The error would have been reported in RLD_ECC_DB_ERR_L and RLD_ECC_DB_ERR_U
7eced415e5dd557aef2d78483b5a7785f0e13670xw * fileds of MC_ERR_REG register. Issue reported by HP-Unix folks during the
7eced415e5dd557aef2d78483b5a7785f0e13670xw * qualification of Herc.
7eced415e5dd557aef2d78483b5a7785f0e13670xw xge_hal_pci_bar0_t *bar0 = (xge_hal_pci_bar0_t *)hldev->bar0;
7eced415e5dd557aef2d78483b5a7785f0e13670xw // Enter Test Mode.
7eced415e5dd557aef2d78483b5a7785f0e13670xw // Enable fg/bg tests.
7eced415e5dd557aef2d78483b5a7785f0e13670xw // Enable RLDRAM configuration.
7eced415e5dd557aef2d78483b5a7785f0e13670xw // Enable RLDRAM queues.
7eced415e5dd557aef2d78483b5a7785f0e13670xw // Setup test ranges.
7eced415e5dd557aef2d78483b5a7785f0e13670xw // Start Reads.
7eced415e5dd557aef2d78483b5a7785f0e13670xw if (__hal_device_register_poll(hldev, &bar0->mc_rldram_test_ctrl, 1,
7eced415e5dd557aef2d78483b5a7785f0e13670xw // Exit test mode.